Sherwood R-904N Troubleshooting guide

cover_904N:cover_904N 2009-10-15 오
11:53 페이지 1
Meijer.com
R-904N
NetBoxx
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 2
Meijer.com
ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
12. Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the
apparatus.
When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings.
Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other.
A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of
the obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11. Only use attachments accessories specified by the
manufacturer.
PORTABLE CART WARNING
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus have been
exposed to rain or moisture, does not operate normally,
or has been dropped.
2
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 3
Meijer.com
Introduction
This symbol is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product's
enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
CAUTION
This symbol is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
WARNING : TO REDUCE THE RISk OF FIRE OR ELECTRIC SHOCk,
DO NOT ExPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
Caution regarding installation
Note : For heat dispersal, do not install this unit in a confined space such as a bookcase or similar enclosure.
Do not block ventilation openings or stack other equipment on the top.
Note to CATV System Installer :
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper
grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point
of cable entry as practical.
FCC INFORMATION
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution : Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada.
FOR YOUR SAFETY
U.S.A
CANADA
CAUTION
• Leave a space around the unit for sufficient ventilation.
• Avoid installation in extremely hot or cold locations, or in an area
that is exposed to direct sunlight or heating equipment.
• Keep the unit free from moisture, water, and dust.
• Do not let foreign objects in the unit.
• The ventilation should not be impeded by covering the ventilation
openings with items, such as newspapers, table-cloths, curtains, etc.
• No naked flame sources, such as lighted candles, should be placed
on the unit.
• Please be care the environmental aspects of battery disposal.
• The unit shall not be exposed to dripping or splashing for use.
• No objects filled with liquids, such as vases, shall be placed on the
unit.
• Do not let insecticides, benzene, and thinner come in contact with
the set.
• Never disassemble or modify the unit in any way.
■Notes on the AC power cord and the wall outlet.
• The unit is not disconnected from the AC power source(mains) as
long as it is connected to the wall outlet, even if the unit has been
turned off.
• To completely disconnect this product from the mains, disconnect
the plug from the wall socket outlet.
• When setting up this product, make sure that the AC outlet you are
using is easily acceptable.
• Disconnect the plug from the wall outlet when not using the unit for
long periods of time.
120 V
Units shipped to the U.S.A and CANADA are designed for operation
on 120 V AC only.
Safety precaution with use of a polarized AC plug.
However, some products may be supplied with a nonpolarized plug.
CAUTION
: To prevent electric shock, match wide blade of
plug to wide slot, fully insert.
ATTENTION
: Pour éviter chocs électriques, introduire la lame
la plus large de la fiche dans la borne
correspondante de la prise et pousser jusqu’ au
fond.
ENERGY STAR® is a U.S. registered mark. As an
ENERGY STAR® Partner, Sherwood has
determined that this product meets the ENERGY
STAR® guidelines for energy efficiency.
3
ENGLISH
READ THIS BEFORE OPERATING YOUR UNIT
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 4
Meijer.com
ENGLISH
contents
• IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
• Introduction
READ THIS BEFORE OPERATING YOUR UNIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
• System Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
• Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
• Universal Remote Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
OPERATING COMPONENTS WITH REMOTE CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
REMOTE CONTROL OPERATION RANGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
LOADING BATTERIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
USING FUNCTIONS OF REMOTE CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
• Operations
LISTENING TO A PROGRAM SOURCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
SURROUND SOUND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
ENJOYING SURROUND SOUND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
LISTENING TO RADIO BROADCASTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
ABOUT VuNow Pod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
ENJOYING INTERNET VIDEOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
OTHER FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
ROOM2 SOURCE PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
• System Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
SETTING THE SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
SETTING THE ROOM EQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
SETTING THE SPEAKER SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
SETTING THE MULTI ROOM SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
• Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
• Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
• Setup Code Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
4
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 5
Meijer.com
• Please be certain that this unit is unplugged from the AC outlet before making any connections.
• Since different components often have different terminal names, carefully read the operating instructions of the component
connected.
• Be sure to observe the color coding when connecting audio, video and speaker cords.
• Make connections firmly and correctly. If not, it can cause loss of sound, noise or damage to the receiver.
1. CONNECTING ANTENNAS
• Change the position of the FM indoor antenna until you
get the best reception of your favorite FM stations.
• A 75Ω outdoor FM antenna may be used to further
improve the reception. Disconnect the indoor antenna
before replacing it with the outdoor one.
2. CONNECTING AUDIO COMPONENT
• The CD IN jacks can be connected to
a CD player, tape deck, etc.
5
ENGLISH
System Connections
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 6
Meijer.com
ENGLISH
3. CONNECTING VIDEO COMPONENTS
• The jacks of VIDEO 1/VIDEO 2 can be connected to a BD player, DVD player, cable TV tuner, satellite system, etc.
• Connect the jacks of VIDEO 2 to the video component in the same way.
• The jacks of AUX can be connected to an additional video component without analog video jacks.
The AUDIO jacks of AUX can be also connected to an additional audio component such as a CD player, tape deck, etc.
• There are two types of video jacks (COMPONENT, (composite) VIDEO) for analog video connections and the HDMI
connectors for digital video and audio connections.
Connect them to the corresponding video jacks according to their capability.
• For your reference, the excellence in picture quality is as follows : “HDMI” > “COMPONENT” > “(composite) VIDEO” .
• When making COMPONENT VIDEO connections, connect “Y” to “Y”, “PB/CB” to “CB”(or “B-Y”, “PB”) and “PR/CR” to “CR”(or
“R-Y”, “PR”).
• When viewing video program sources through MONITOR OUT jack, you must use the same type of video jacks that you did
connect to video playback components such as BD player, DVD player, cable TV tuner, etc.
AUX BD player, Video game player, etc.
BD player, DVD player, etc.
■Notes :
• You can connect Apple iPod to this receiver via Sherwood iPod dock. If Sherwood iPod dock is connected to DIGILINK-i jack
for system control, you should connect its video and audio jacks to the “VIDEO 2” jacks of this receiver. Because, when you
control your iPod with the unit's remote control, the VIDEO 2/iPod is automatically selected as an input source and the
corresponding operation is performed.
• You can enjoy viewing internet video contents that the VuNow Pod delivers via either the HDMI (given priority) or the
(composite) VIDEO MONITOR OUT only, not the COMPONENT MONITOR OUTs.
6
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 7
Meijer.com
Continued
• You can connect the source component (BD player, etc.) to the display component (TV, projector, etc.) through this receiver
with using a commercially available HDMI cord.
• The HDMI connection can carry uncompressed digital video signals and digital audio signals.
• The HDMI video stream signals (video signals) are theoretically compatible with DVI-D. When connecting to a TV monitor,
etc., equipped with DVI-D connector, it is possible to connect using a commercially available HDMI-DVI converter cord.
Since the HDMI-to-DVI connection cannot carry any audio signals, set the “HDMI” to “AMP” to hear the HDMI digital audio
signals on this receiver. (For details, refer to the “When selecting the “HDMI (HDMI Audio Out)” on page 25.)
■Copyright protection system
• This unit supports HDCP (High-bandwidth Digital Contents Protection), technology to protect copyright of digital video signals
against illegal duplication. HDCP must also be supported on the components connected to this unit.
• This unit is HDMI Ver. 1.3 compatible.
• HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing
LLC.
■Notes :
• For stable signal transfer, we recommend using HDMI cords that are a maximum of 5 meters in length.
• Among the components that support HDMI, some components can control other components via the HDMI connector.
However, this unit cannot be controlled by another component via the HDMI connector.
• The audio signals from the HDMI connector (including the sampling frequency and bit length) may be limited by the
component that is connected.
• The video signals will not be output properly if a component incompatible with HDCP is connected.
• If the resolutions of the video signals which are output from the MONITOR OUTs and your monitor TV are not matched, the
picture is not clear, natural or displayed. In this case, change the setting of the resolution on the source component (DVD
player, etc.) to one which the monitor TV can handle. (For details, refer to the operating instructions of the source component.)
• When you want to enjoy only the picture on your TV, not the sound, you should set the “HDMI” to AMP not to output the digital
audio signal from the HDMI MONITOR OUT of this receiver. (For details, refer to “When selecting the “HDMI (HDMI Audio
Out)” on page 25.)
4. CONNECTING DIGITAL INS
• The OPTICAL and the COAXIAL DIGITAL
OUTs of the components that are connected
to this unit can be connected to these
DIGITAL INs.
• When making the COAXIAL DIGITAL
connection, be sure to use a 75 Ω COAXIAL
cord, not a conventional AUDIO cord.
■Notes :
• Be sure to make either a OPTICAL or a
COAXIAL DIGITAL connection on each
component. (You don’t need to do both.)
• If you connect the DIGITAL INs to your components, you should assign the DIGITAL INs correctly. (For details, refer to
“When CD, AUX, VIDEO 1, VIDEO 2(“V2/IPOD”) is selected as an input source” on page 20.)
5.
CONNECTING SUBWOOFER PRE OUT
• To emphasize the deep bass sounds, connect a powered
subwoofer.
7
ENGLISH
■HDMI (High Definition Multimedia Interface) connection : (*1)
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 8
Meijer.com
ENGLISH
6. CONNECTING SPEAkERS
• Be sure to connect speakers firmly and correctly
according to the channel(left and right) and the
polarity (+ and -). If the connections are faulty, no
sound will be heard from the speakers, and if the
polarity of the speaker connection is incorrect,
the sound will be unnatural and lack bass.
• When using only one surround back speaker,
you should connect it to SURROUND BACK/
ROOM2 LEFT channel.
• Because this receiver cannot drive the surround
back speakers and the ROOM2 speakers
simultaneously, you should assign their power
amplifier correctly depending on how to use
them. (For details, refer to "CONNECTING
ROOM2 SPEAKERS" on page 9 and "When
selecting the AMP ASSIGN" on page 48.)
• For installing the speakers, refer to "Speaker
placement" on page 9.
• After installing the speakers, first adjust the
speaker settings according to your environment
and speaker layout. (For details, refer to
"SETTING THE ROOM EQ" on page 49.)
Caution :
• Be sure to use the speakers with the impedance
of 6 ohms or above.
• Do not let the bare speaker wires touch each
other or any metal part of this unit. This could
damage this unit and/or the speakers.
• Never touch the speaker terminals while the AC
input cord is connected to the wall AC outlet.
Doing so could result in electric shocks.
■Connecting speaker wire
1. Strip away approx. 10 mm
(3/8 inch) of wire insulation,
then twist the wire ends
tight.
2. Loosen by turning the
speaker terminal counterclockwise.
8
3. Insert the bare part of the
wire.
4. Tighten by turning it
clockwise.
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 9
Meijer.com
Speaker placement
ENGLISH
Ideal speaker placement varies depending on the size of
your room and the wall coverings, etc. The typical example
of speaker placement and recommendations are as follows :
■Front left and right speakers and center speaker
• Place the front speakers with their front surfaces as flush
with TV or monitor screen as possible.
• Place the center speaker between the front left and right
speakers and no further from the listening position than
the front speakers.
• Place each speaker so that sound is aimed at the location
of the listener’s ears when at the main listening position.
■Surround left and right speakers
• Place the surround speakers approximately 1 meter (40
inches) above the ear level of a seated listener on the
direct left and right of them or slightly behind.
■Surround back left and right speakers
• Place the surround back speakers at the back facing the
front at a narrower distance than front speakers.
• When using a single surround back speaker, place it at the
rear center facing the front at a slightly higher position (0
to 20 cm ) than the surround speakers.
• We recommend installing the surround back speaker(s) at
a slightly downward facing angle. This effectively prevents
the surround back channel signals from reflecting off the
TV or screen at the front center, resulting in interference
and making the sense of movement from the front to the
back less sharp.
1. TV or Screen
2. Front left speaker
3. Subwoofer
4. Center speaker
5. Front right speaker
6. Surround left speaker
■Subwoofer
• The subwoofer reproduces powerful deep bass sounds.
Place a subwoofer anywhere in the front as desired.
■Notes :
• When using a conventional TV, to avoid interference with
the TV picture, use only magnetically shielded front
left and right and center speakers.
• To obtain the best surround effects, the speakers except
the subwoofer should be full range speakers.
7. CONNECTING ROOM2 SPEAkERS
• ROOM2 playback feature allows you to play a different
program source in another room as well as one source
in the main room at the same time.
• For ROOM2 playback, connect the ROOM2 speakers
to the SURROUND BACK/ROOM2 terminals.
• Because this receiver cannot drive the surround back
speakers and the ROOM2 speakers simultaneously,
you should assign their power amplifier correctly
depending on how to use them. (For details, refer to
“When selecting the AMP ASSIGN” on page 48.)
9
7. Surround right speaker
8. Surround back left speaker
9. Surround back right speaker
10. Surround center speaker
11. Listening position
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 10
Meijer.com
ENGLISH
8. CONNECTING FOR SYSTEM CONTROL
• Connect this jack to the DIGILINK-i jack of Sherwood
iPod dock that allows you to control the iPod with the
unit's remote control.
9. CONNECTING TO NETWORk
When you connect this receiver to a home network, you can enjoy viewing a variety of video contents and listening to internet
radio audio that the built-in VuNow Pod delivers via broadband without the use of a personal computer (PC).
• There are two ways to connect to a home network as illustrated below :
■Wired Connection
• Connect the LAN connector of this receiver to your internet source.
LAN
Internet
Modem
Broadband router
PC
■Wireless Connection
• Connect the supplied VuNow USB Wireless adapter to the USB connector and install a broadband router supporting
wireless LAN.
• The USB memory device can be also connected to the USB connector to play video or music files, etc. or to download the
rented videos. (For details on connecting USB memory device, refer to “USB CONNECTOR” on page 12.)
■Notes :
• Be sure to make either wired connection or wireless connection. (You don’t need to do both.)
• After making a broadband internet connection, you should set the communication setting. (For details, refer to “Network” on page 42.)
• When using a broadband internet connection, a contract with an internet service provider is required. For more information, contact your
nearest internet service provider.
• Refer to the operating instructions of the equipment because the connected equipment and connection method may differ depending on your
internet environment.
• Use a LAN cable/router supporting 10 BASE-T/100 BASE-TX.
• A broadband speed of 768 kbps or more is recommended.
• Some LAN cables are easily affected by noise.
We recommend using a shielded type cable.
10. AC INPUT CORD
• Plug this cord into a wall AC outlet.
10
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 11
Meijer.com
ENGLISH
Front Panel Controls
1. POWER switch
2. POWER ON/STANDBY button/indicator
3. SPEAKER button
4. VIDEO INPUT SELECTOR button
5. AUDIO INPUT SELECTOR button
6. SURROUND MODE UP/DOWN(〉 /〈 ) buttons
7. STEREO button
8. VOLUME UP/DOWN (+/-) buttons
9. HEADPHONE jack
10. F. AUX jack
For details, see next page.
11. SETUP MIC jack
For details, see next page.
12. USB connector
For details, see next page
13. DOLBY VOLUME indicator
14. REMOTE SENSOR
15. FLUORESCENT DISPLAY
For details, see below.
■FLUORESCENT DISPLAY
1. Input, frequency, volume level, operating information, etc.
2. AUTO indicator
3. STEREO indicator
4. TUNED indicator
5. HEADPHONE indicator
6. SLEEP indicator
7. MEMORY indicator
11
8. PRESET indicator
9. Surround mode indicators
10. DIGITAL indicator
11. Preset number, sleep time display
12. HDMI indicator
13. DIRECT indicator
14. ROOM2 indicator
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 12
Meijer.com
■ FRONT AUx JACk
ENGLISH
• The FRONT AUX jack can be connected to additional audio components such as an MP3 player, etc.
■ Note :
• When connecting this jack to an MP3 player, etc., you should use the stereo mini cord, not a mono mini cord.
■ SETUP MIC JACk
• To use Room EQ setup function, connect the supplied microphone to the SETUP MIC jack. (For details, refer to
“SETTING THE ROOM EQ” on page 49.)
■Notes:
• Because the microphone for Room EQ setup is designed for use with this receiver, do not use a microphone other
than the one supplied with this receiver.
• After you have completed the Room EQ setup procedure, disconnect the microphone.
■ USB CONNECTOR
• This connector can be connected to a USB memory device to play video or music files, etc.
or to download the rented videos from VuNow service. (For details, refer to “ENJOYING
INTERNET VIDEOS” on page 31.)
• The supplied VuNow USB wireless adapter can be also connected to the USB connector
for broadband internet connection. (For details on connecting the supplied VuNow USB
wireless adapter, refer to “CONNECTING TO NETWORK” on page 10.)
■Notes:
• Before connecting a USB memory device, open the cover.
• Do not use a USB extension cable when connecting a USB memory device to this
connector.
• After playing files or downloading the rented videos, remove the USB memory device
performing “Eject USB Disk” procedure on page 34.)
12
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 13
Meijer.com
This universal remote control can operate not only this receiver but also most popular brands of audio and video components
such as iPod docks, CD players, tape decks, TVs, BD/DVD players, satellite receivers, cable boxes, etc.
• To operate 7 components other than this receiver, you should enter the setup code for each component.
(For details, refer to “USING FUNCTIONS OF REMOTE CONTROL” on page 16.)
• The numbered buttons on the remote control have different functions in different device modes. For details, refer to
“FUNCTION TABLE of the NUMBERED BUTTONS” on the next page.
LED
POWER ON button
STANDBY button
DEVICE buttons
To operate the desired component with
this remote control, first select the
corresponding DEVICE button.
ROOM2 VOLUME
UP/DOWN(∧/∨) buttons
ROOM2 INPUT
SELECTOR buttons
MUTE button
ROOM2 button
VOLUME UP/DOWN(+/-) buttons
TUNING UP/DOWN(+/-) buttons
PRESET UP/DOWN(+/-) buttons
SETUP button
DIMMER button
CURSOR CONTROL, ENTER
buttons
DISPLAY button
RETURN button
AUDIO ASSIGN button
SURROUND MODE
UP/DOWN (〉/〈 ) buttons
STEREO button
SOUND PARAMETER button
SLEEP button
NUMERIC (0~9, +10)/
INPUT SELECTOR buttons
To select the desired input
source of TUNER~VuNow
MACRO(M1~M3) buttons
To operate a macro function,
press the corresponding
MACRO button.
13
ENGLISH
Universal Remote Controls
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 14
Meijer.com
■FUNCTION TABLE of the NUMBERED BUTTONS.
ENGLISH
(for iPod Dock)
(for CD player) (for Tape deck)
(for VCR)
(for BD/DVD
player)
(for TV)
(for Satellite
receiver)
(for Cable box)
POWER
ON
POWER
ON
POWER
ON
POWER
ON
POWER
ON
POWER
ON
STANDBY
(POWER OFF)
STANDBY
(POWER OFF)
STANDBY
(POWER OFF)
STANDBY
STANDBY
STANDBY
(POWER OFF) (POWER OFF) (POWER OFF)
RANDOM
ALBUM
UP/DOWN
(∧/∨)
MUTE
MUTE
MUTE
MUTE
CHANNEL
UP/DOWN
(∧/∨)
CHANNEL
UP/DOWN
(∧/∨)
CHANNEL
UP/DOWN
(∧/∨)
CHANNEL
UP/DOWN
(∧/∨)
VOLUME
UP/DOWN (+/-)
VOLUME
VOLUME
VOLUME
UP/DOWN (+/-) UP/DOWN (+/-) UP/DOWN (+/-)
INPUT
SELECTOR
INPUT
SELECTOR
RECORD
PLAY/PAUSE
PAUSE
PAUSE
PAUSE
PLAY
PLAY
PLAY
PLAY
STOP
STOP
STOP
REWIND /FAST
FORWARD (
/
)
REVERSE /FORWARD
SKIP (
/
)
REVERSE /FORWARD
SKIP (
/
)
INPUT
SELECTOR
INPUT
SELECTOR
NUMERIC
NUMERIC
NUMERIC
RECORD
PAUSE
REWIND /FAST
FORWARD (
/
INPUT
SELECTOR
STOP
)
REVERSE /FORWARD
SEARCH (
/
)
REVERSE /FORWARD
SKIP (
/
)
MENU
DISC MENU
HOME MENU
CURSOR
UP/DOWN
CURSOR
UP/DOWN
ENTER
ENTER
DISPLAY
RETURN
REPEAT
REPEAT
PLAY LIST
PLAY LIST
UP/DOWN(>/<)
UP/DOWN(>/<)
PLAY MODE
AUDIO
SUBTITLE
NUMERIC
NUMERIC
NUMERIC
DOCK MODE
■Notes :
• Some functions for each component may not be available or may work differently.
• Depending on other kinds of components that are available for each DEVICE button, some functions may not be available or
may work differently, too.
• For details about functions, refer to the operating instructions of each component.
14
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 15
Meijer.com
ReMote contRoL oPeRAtIon RAnGe
• Use the remote control within a range of about 7 meters
(23 feet) and angles of up to 30 degrees aiming at the
remote sensor.
1. Enter the setup code for each component other
than this receiver. For details, refer to “Entering
a setup code” on page 16.
2. Turn on the component you want to operate.
3. Press the DEVICE button on the remote control
corresponding to the component you wish to
operate.
4. Aim the remote control at the REMOTE
SENSOR of the component you wish to control
and press the button corresponding to the
operation you want.
• In such a case that some components do not have the
REMOTE SENSOR which receives the remote signals,
this remote control cannot operate them.
LoADInG BAtteRIes
• When the remote control does not operate, the old batteries should be replaced. In this case, load new batteries within several
minutes after removing old batteries.
• If the batteries are removed or have been exhausted for a longer period of time, memorized contents will be cleared. Should
this happen, you should memorize them again.
1. Remove the cover.
2. Load two batteries (“AAA” size, 1.5V) matching
the polarity.
• Remove the batteries when they are not used for a long
time.
• Do not use the rechargeable batteries (Ni-Cd type).
• Be sure to use alkaline batteries.
15
ENGLISH
oPeRAtInG coMPonents WItH ReMote contRoL
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 16
Meijer.com
ENGLISH
UsInG FUnctIons oF ReMote contRoL
• This remote control can control up to 8 different components.
• Before operating audio and video components other than this receiver with using this remote control, the setup code for each
component should be entered.
• For system remote control operation, “000” was stored previously in the memory of the device button “DOCK” for Sherwood iPod
dock, “CD” for Sherwood CD player, “BD” for Sherwood BD/DVD player and “TV” for Sherwood TV respectively as its factory
setup code. So, you don’t need to enter its code for each Sherwood component except in such a case that its code does not work.
Entering a setup code
1. Turn on the component you want to operate.
4. Enter a 3 digit code, aiming the remote control at
the remote sensor on the component.
Example: When entering “001”.
2. Find the setup codes according to the type and
the brand name of your component, referring to
“Setup Code Table” on page 57.
3. Press and hold down both the ENTER button
and the desired one of the DEVICE buttons for
more than 1 seconds.
• If entering is performed successfully, the LED will flicker
twice.
• To be sure that the setup code is correct, press the
POWER ON (or STANDBY) button. If your component
is turned off, the setup code is correct.
• When your component is not turned off, repeat the
above steps 2 to 4, trying each code for your
component until you find one that works.
■Notes:
• If the LED did not flicker twice, then repeat the above
steps 3 to 4 and try entering the same code again.
• Manufacturers may use different setup codes for the
same product category. For that reason, it is important
that you check to see if the code you have entered
operates as many controls as possible. If only a few
functions operate, check to see if another code will work
with more buttons.
• The LED will flicker once.
■Note :
5. Repeat the above steps 1 to 4 for each of your
• The “AVR” button is unavailable for the audio
components other than this receiver.
components.
16
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 17
Meijer.com
■Removing a punch-through function
• When removing the AUDIO volume punch-through, press
and hold down both “AVR” button and “VOLUME -” button
for more than 1 second.
This remote control may be programmed to operate either
the AUDIO volume punch-through or the TV volume and/or
TV channel punch-through in conjunction with any of the 8
components controlled by this remote control.
For example, since this receiver will likely be used as the
sound system while watching TV, you may want to adjust
this receiver’s volume although this remote control is set to
control the TV.
• When programming this remote control for the AUDIO
volume punch-through, press and hold down both “AVR”
button and “VOLUME +” button for more than 1 second.
• If removing is performed successfully, the LED will flicker
twice.
• When you want to remove either TV volume or TV
channel punch-through, press and hold down both “TV”
button and either “VOLUME -” or “CH ∨” button for
more than 1 second.
■Removing all punch-through functions
Press and hold down both “AVR” button and “AUDIO
ASSIGN” button for more than 1 second.
• If programming is performed successfully, the SET LED
will flicker twice.
• When you want either TV volume or TV channel
punch-through, press and hold down both “TV” button
and either “VOLUME +” or “CH ∧” button for more
than 1 second.
■Note :
• If you use one of AUDIO and TV volume punchthrough functions, you cannot use the other.
• If removing all punch-through functions is performed
successfully, the LED will flicker twice.
17
ENGLISH
Using a punch-through function
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 18
Meijer.com
ENGLISH
Programming a macro function
3. Press “ENTER” button.
• The macro function enables you to program a
series of button operations(up to 10) on this
remote control into a single button.
• You can store up to three separate macro
command sequences into “M1”, “M2” and “M3”
buttons.
1. Press and hold down both “ENTER” button and
one of three NUMERIC buttons (“1” ~ “3”)
corresponding to “M1”~”M3” buttons for more
than 1 second.
Example: When programming a series of button
operations into “M1” button.
• If the programming is performed successfully, the
LED will flicker twice.
■To remove a macro program
• When removing a macro program, perform the
above steps 1 and 3, but ignore the step 2.
■To change a macro program
• When a new macro program is stored into a
MACRO button with performing the above steps
1 to 3, the previous macro program is cleared
from the memory of the MACRO button.
Operating a macro function
• If the macro mode is entered, the LED will flicker
once.
• Aim the remote control at the REMOTE SENSORs of
the components to be controlled and press the MACRO
button you want.
Example: When pressing “M1” button.
2. Press the operation buttons you want to
program in order.
■Note :
You should press the corresponding DEVICE
buttons before pressing each operation button.
Example: When playing a BD on the BD player
connected to VIDEO 2 jacks of this
receiver.
①. Press “AVR” button to control this receiver.
②. Press “POWER ON” button to turn this
receiver on.
③. Press “AVR” button to control this receiver.
④. Press “VIDEO 2(7)” button to select the
desired input source.
⑤. Press “BD” button to control the BD player.
⑥. Press “POWER ON” button to turn the BD
player on.
⑦. Press “BD” button to control the BD player.
⑧. Press “▶” button to start playback.
■Notes:
• The codes programmed into a MACRO button will be
transmitted at an interval of 0.5 seconds. However,
some components may not be able to complete one
operation in 0.5 seconds and may miss the next code.
In this case, the macro function cannot control the
corresponding components correctly.
• Be sure to use the remote control within the remote
control operation range of the components.
• Depending on the operation status of the components,
etc., the macro function cannot control the
corresponding components correctly.
18
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 19
Meijer.com
■Notes:
• Before operating this receiver with the supplied remote control, refer to “Universal Remote Controls” on page 13 for details
about operation.
• Before operating this receiver, first set this unit as desired for optimum performance, doing the system setup procedures.
(For details, refer to “System Setup” on page 46.)
LISTENING TO A PROGRAM SOURCE
3. Select the desired input source.
Before operation
• Enter the standby mode.
• The POWER ON/STANDBY indicator lights
up amber. This means that the receiver is
not disconnected from the AC mains and a
small amount of current is retained to
support the operation readiness.
• To switch the power off, push the POWER
switch again.
Then the power is cut off and the POWER
ON/STANDBY indicator goes off.
• Each time the “VIDEO” on the front panel is pressed, the
input source changes as follows:
→VIDEO 1 →V2/IPOD → VuNow
1. In the standby mode, turn the power on.
• Each time the “AUDIO” button is pressed, the input
source changes as follows:
→TUNER →CD →AUX →F.AUX
(Frequency display)
• Each time the “TUNER” button on the remote control is
pressed, the band changes as follows:
→FM ST →FM MONO
• Each time the POWER ON/STANDBY button on the front
panel is pressed, the receiver is turned on to enter the
operating mode (the POWER ON/STANDBY indicator
lights up blue) or off to enter the standby mode (the
POWER ON/STANDBY indicator lights up amber).
• On the remote control, press the POWER ON button to
enter the operating mode or press the STANDBY button
to enter the standby mode.
• To enjoy VuNow, refer to “ENJOYING INTERNET
VIDEOS” on page 31.
■Note:
• When the VuNow is selected, depending on whether the
HDMI MONITOR OUT is connected or not, the video
signals are automatically output from either the HDMI
MONITOR OUT (given priority) or the (composite) VIDEO
MONITOR OUT only.
2. Switch the speakers on.
• Then “SPK ON” is displayed for several
seconds and the sound can be heard from
the speakers connected to the speaker
terminals.
• When using the headphones for private
listening, press the SPEAKER button
again to switch the speakers off. Then
“SPK OFF” is displayed for several
seconds (“H” indicator lights up.)
19
ENGLISH
Operations
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 20
Meijer.com
Muting the sound
ENGLISH
When CD, AUx, VIDEO 1, VIDEO 2 (“V2/
IPOD”) is selected as an input source
4. Select the digital or analog input connected as
desired.
• “MUTE” is displayed.
• To resume the previous sound level, press it again.
• Each time this button is pressed, the corresponding input
is selected as follows :
→c(oaxial)1 →c2 →o1 →H(HDMI audio)* →A(nalog)
Listening with headphones
* : When CD is selected, the HDMI audio input cannot be
selected.
■Notes:
• When VuNow, tuner, F.AUX is selected as an input
source, the digital input cannot be selected.
• When the selected digital input or HDMI input is not
connected, the “DIGITAL” or “HDMI” indicator flickers
and the analog input is automatically selected.
5. Operate the selected component for playback.
• Be sure to switch speakers off.
• When playing back the program sources with surround
sound, refer to “ENJOYING SURROUND SOUND” on
page 23.
■Note:
• Be careful not to set the volume too high when using
headphones.
6. Adjust the (overall) volume.
■Note:
• For safe amplifier operation, the maximum level may vary
depending on the program source, surround mode, etc.
20
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 21
Meijer.com
sURRoUnD soUnD
Surround modes
■DTS Digital Surround
■Dolby Digital
DTS Digital Surround(also called simply DTS) supports up to
5.1 discrete channels and uses less compression for high
fidelity reproduction. Use it with DVDs and CDs bearing the
DTS logo.
Dolby Digital is the multi-channel digital signal format
developed by Dolby Laboratories. Discs bearing the Dolby
Digital logo includes the recording of up to 5.1 channels of
digital signals. This will put you right in the middle of the
action, just like being in a movie theater or concert hall.
■DTS-ES™ Discrete 6.1
■Dolby Digital Ex
This is a 6.1 channel discrete digital audio format adding a
surround back channel to the DTS digital surround sound. The
seven totally separate audio channels provide better spatial
imaging and 360 degrees sound localization, perfect for sounds
that pan across the surround channels. Use it with DVDs
bearing the DTS-ES logo, especially those with a DTS-ES
Discrete sound track.
This mode expands 5.1-channel sources for 6.1/7.1 channel
playback. It's especially suited to Dolby Digital EX
soundtracks that include a matrix-encoded surround back
channel. The additional channel adds an extra dimension and
provides an enveloping surround sound experience, perfect
for rotating and fly-by sound effects.
■DTS - ES™ Matrix 6.1
■Dolby Digital Plus
This is a 6.1 channel discrete digital audio format inserting a
surround back channel to the DTS digital surround sound
through matrix encoding. Use it with DVDs bearing the DTS-ES
logo.
Developed for use with HDTV, including the new video disc
formats Blu-ray and HD DVD, this is the latest multichannel
audio format from Dolby. It supports up to 7.1 channels with
48 kHz/24-bit sampling rate and signal resolution.
■Dolby TrueHD
■DTS Neo:6™ surround
Designed to take full advantage of the additional storage
space offered by the new Blu-ray and HD DVD disc formats,
this new Dolby format offers up to 7.1 discrete channels of
lossless audio performance with 96 kHz/24 bit sampling rate
and signal resolution.
DTS Neo:6 is a matrix decoding technology for archieving 7.1
channel surround playback.
■DTS 96/24
This is high resolution DTS with a 96 kHz sampling rate and
24 bit resolution, providing superior fidelity. Use it with DVDs
bearing the DTS 96/24 logo.
■Dolby Pro Logic IIx surround
This mode expands any 2-channel source for 7.1-channel
playback. It provides a very natural and seamless surround
sound experience that fully envelopes the listener. As well as
music and movies, video games can also benefit from the
dramatic spatial effects and vivid imaging. It includes "Dolby
Pro Logic IIx Movie" suited for playing movies, "Dolby Pro
Logic IIx Music" suited for playing music and "Dolby Pro Logic
IIx Game" suited for playing games.
■DTS-HD High Resolution Audio
Developed for use with HDTV, including the new video disc
formats Blu-ray and HD DVD, this is the latest multi-channel
audio format from DTS. It supports up to 7.1 channels with
96kHz/24 bit sampling rate and signal resolution.
■DTS-HD Master Audio
Designed to take full advantage of the additional storage
space offered by the new Blu-ray and HD DVD disc formats,
this new DTS format offers up to 7.1 discrete channels of
uncompressed digital audio with 96 kHz/24 bit sampling rate
and signal resolution.
■Dolby Pro Logic II surround
If you are not using any surround back speakers, Dolby Pro
Logic II surround will be used instead of Dolby Pro Logic IIx
surround. It includes Dolby Pro Logic II Movie, Dolby Pro
Logic II Music and Dolby Pro Logic II Game like Dolby Pro
Logic IIx surround.
Manufactured under license under U.S. Patent #'s: 5,451,942;
5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535;
7,212,872; 7,333,929;,7,392,195;7,272,567 & other U.S. and
worldwide patents issued & pending.
DTS is a registered trademark and the DTS logos, Symbol,
DTS-HD and DTS-HD Master Audio are trademarks of DTS,
Inc.
ⓒ1996-2008 DTS, Inc. All Rights Reserved.
■Dolby Pro Logic
This mode expands any 2-channel source(, including Dolby
Surround source) for 4 channel (front left, center, front right
and surround) playback. The surround channel is monaural,
but is played through two surround speakers.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are registered trademarks
of Dolby Laboratories.
21
ENGLISH
• This receiver incorporates a sophisticated Digital Signal Processor that allows you to create optimum sound quality and sound
atmosphere in your personal Home Theater.
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 22
ENGLISH
Meijer.com
■Stadium
This mode provides the expansive sound field to achieve
the true stadium effect when watching baseball or soccer
games.
• The following modes apply conventional 2-channel
signals such as digital PCM or analog stereo signals to
high performance Digital Signal Processor to recreate
sound fields artificially. Select one of the 7 provided
surround modes according to the program source you
want to play.
■Classic
This mode provides the acoustic effects of a large concert
hall for classical music.
■Movie
This mode provides the effect of being in a movie theater
when watching a action movies with dynamic soundtracks.
■Hall
This mode provides the ambience of a concert hall for rock
or pop music.
■Drama
This mode is suitable for movies with lots of dialog.
■MULTI CH Stereo
This mode is for enjoying stereo sound from all speakers.
■Game
This mode is suitable for video games.
For your reference, the sound from each channel can be reproduced according to the surround modes as follows:
Modes
FRONT L/R
CENTER
SURROUND L/R
DTS-HD HIGH RESOLUTION AUDIO/MASTER AUDIO
Channels
O
O
O
SURROUND BACK L/R
O/—
SUBWOOFER
O
DTS, DTS 96/24
O
O
O
—
O
DTS ES DISCRETE/MATRIX
O
O
O
O
O
DTS Neo: 6
O
O
O
O
—(*)
DOLBY DIGITAL PLUS / DOLBY TRUEHD
O
O
O
O/—
O
DOLBY DIGITAL
O
O
O
—
O
DOLBY DIGITAL EX
O
O
O
O
O
DOLBY PRO LOGIC IIx MOVIE/MUSIC/GAME
O
O
O
O
O
DOLBY PRO LOGIC II MOVIE/MUSIC/GAME,
O
O
O
—
O
DOLBY PRO LOGIC
Other Surrounds
O
O
O
O
—(*)
STEREO
O
—
—
—
—(*)
(*): Depending on the subwoofer setting, the sound from the subwoofer channel may be reproduced.
• Depending on the speaker settings and the number of the encoded channels, etc., the sound from the corresponding channels
cannot be reproduced.(For details, refer to "SETTING THE ROOM EQ" on page 50 and “SETTING THE SPEAKER SETUP” on
page 50.)
22
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 23
Meijer.com
ENJOYING SURROUND SOUND
■Notes:
• Before surround playback, first perform the speaker setup procedure, etc. on the SETUP menu for optimum performance.
(For details, refer to “SETTING THE ROOM EQ” on page 49 and “SETTING THE SPEAKER SETUP on page 50.)
ENGLISH
■Select the desired surround mode.
• Press the SURROUND MODE UP/DOWN (〉 /〈) buttons to select a surround mode or press the STEREO button to select
the stereo mode.
• Each time the SURROUND MODE UP/DOWN (〉 /〈) buttons are pressed, the surround mode changes as follows :
Auto surround mode :
The truest possible playback mode will be automatically selected according to the number of
(“AUTO” indicator lights up) channels in the signal being input.
Manual surround mode : You can select the desired of different surround modes selectable for the signal being input.
(“AUTO” indicator goes off)
Signal format being input
Dolby Digital Plus sources,
Dolby TrueHD sources,
Dolby Digital EX 6.1 channel sources
Dolby Digital 5.1 channel sources
Dolby Digital 2 channel sources
DTS-HD High Resolution Audio sources,
DTS-HD Master Audio sources,
DTS ES Discrete 6.1 channel sources,
DTS ES Matrix 6.1 channel sources,
DTS 96/24 sources
DTS sources
PCM 2 channel sources,
PCM multi-channel sources,
Analog stereo sources,
program sources from VuNow
Selectable surround mode
AUTO SURROUND, corresponding DOLBY mode, STEREO
AUTO SURROUND, <DOLBY DIGITAL EX, DOLBY D+PLIIx MUSIC>, (DOLBY D+ PLIIx MOVIE),
[DOLBY DIGITAL], STEREO
AUTO SURROUND, <DOLBY PLIIx MOVIE, DOLBY PLIIx MUSIC, DOLBY PLIIx GAME>, [DOLBY PLII
MOVIE, DOLBY PLII MUSIC, DOLBY PLII GAME], DOLBY PRO LOGIC, STEREO
AUTO SURROUND, corresponding DTS mode, STEREO
AUTO SURROUND,<DTS+NEO:6, DTS+PLIIx MUSIC>, (DTS+PLIIx MOVIE), [DTS], STEREO
AUTO SURROUND, <DOLBY PLIIx MOVIE, DOLBY PLIIx MUSIC, DOLBY PLIIx GAME>, [DOLBY PLII
MOVIE, DOLBY PLII MUSIC, DOLBY PLII GAME], DOLBY PRO LOGIC, MOVIE, DRAMA, GAME,
STADIUM, CLASSIC, HALL, MULCH CH STEREO, STEREO
• Depending on surround back speaker setting, some surround modes can be selected or not as follows:
< >: Possible only when surround back speaker is not set to "NO".
[ ] : Possible only when surround back speaker is set to "NO".
( ) : Possible only when surround back speaker is set to “X2”.
■Note :
• When the SPEAKER button is set to off, only the stereo mode can be selected.
When adjusting the sound parameters
• You can adjust the different sound parameters for optimum surround effect.
1. Press the SOUND PARAMETER button.
• The “EQ ~ “ or (“L.SYNC ~ “, etc.) is displayed for several
seconds.
• If the parameter mode disappears, press this button again.
23
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 24
Meijer.com
2. Press the CURSOR UP/DOWN buttons to select the desired parameter.
ENGLISH
• Each time these buttons are pressed, the parameter mode
changes as follows :
→“EQ” ↔ “L.SYNC” ↔ “DM”↔ “DRC” ↔ “LFE” ↔ “HDMI” ←
(Room EQ)
(Lip-Sync)
(Dual Mono) (Dynamic
(LFE level) (HDMI Audio Out)
Range Control)
→“D.VOL” ↔ “PNRM” ↔ “DIMEN” ↔ “C.WIDTH” ↔ “A.DLY” ←
(Dolby Volume)
(Panorama)
(Dimension)
(Center Width)
(Auto Delay)
■Notes:
• To set the “EQ” to “ON”, perform the ROOM EQ setup first. (For details, refer to “SETTING THE ROOM EQ” on page 49.)
• “C.WIDTH”, “DIMEN” and “PNRM” can be selected only while listening in Dolby Pro Logic II Music or Dolby Pro Logic IIx
Music mode.
• Some parameters such as “DRC”, etc. may not be selected depending on the surround mode or program source, etc.
3. Press the CURSOR LEFT/RIGHT buttons to adjust the selected parameter as desired.
■When selecting the “EQ (Room EQ)”
• The room EQ is a kind of room equalizer for your speakers. According to the acoustic characteristics of your room measured
by the ROOM EQ setup, the room EQ automatically adjusts the frequency response of your speakers.
• If you use different brands or sizes of speakers for some channels or have a room with unique acoustic characteristics, such
as walls, furniture, and the dimensions or the shape of the room, we recommend using the room EQ.
OFF : To turn off the room EQ.
↕
ON : To adjust the frequency response of all speakers to the flattest response.
■When selecting the “L.SYNC (Lip-Sync)”
• There may be a slight time delay between the video and audio signals in case that some video playback equipments may
process the video signals later than the audio signals due to signal processing procedure, etc.. Should this happen, you can
adjust the time delay of audio signals to synchronize the sound with the picture.
• The time delay can be adjusted with the range of 0.0 ~ 9.0 frames (1 sec. = 30 frames).
■When selecting the “DM (Dual Mono)”
• Dual mono software usually is used to put two different mono soundtracks, that you can listen to together or separately, on
one DVD, etc. With this setting you can choose which dual mono setting you want to listen to.
• This setting works only with dual mono encoded Dolby Digital and DTS soundtracks.
→ CH 1 : Only channel 1 is heard from the front speakers.
↕
CH 2 : Only channel 2 is heard.
↕
→ CH 1+2 : Both channels are heard.
24
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 25
Meijer.com
Continued
→ AUTO* : To adjust the level of dynamic range automatically.
↕
MAX : To adjust it to “MAX” level.
↕
MID : To adjust it to “MID” level.
↕
→ OFF : To turn the DRC function off.
*: Valid only when the digital signals from the Dolby TrueHD source are being input.
■When selecting the “LFE (LFE level)”
• Some Dolby Digital or DTS source, etc. includes LFE (ultra low bass) signals.
• The LFE level can be adjusted as desired.
OFF : To output no sound from the LFE channel.
↕
0 : In general, to set to 0dB (recommended value)
↕
-10: To set to -10 dB for some early DTS software, etc.
■When selecting the “HDMI (HDMI Audio Out)”
• The HDMI connection can carry uncompressed digital video signals and digital audio signals.
Depending on whether the digital audio signals input into the HDMI IN are output from the HDMI MONITOR OUT of this
receiver or not, you should set the HDMI AUDIO OUT correctly.
AMP : Not to output the HDMI digital audio signals from the HDMI MONITOR OUT of this receiver, meaning these signals
↕
are heard from the speakers connected to this receiver.
THRU : To output the HDMI digital audio signals from the HDMI MONITOR OUT, meaning these signals are heard from the
speakers of your TV.
■Note :
• When the HDMI Audio Out is set to THRU, no sound will be heard from the speakers connected to this receiver (except
ROOM 2 speakers) even though any input source is selected.
■When selecting the “A.DLY (Auto Delay)”
• This function automatically corrects the audio-to-video delay between components with the HDMI connection.
OFF : To turn off the Auto Delay function.
↕
ON : To turn it on.
■Note :
• This function is valid only when the connected display component supports the automatic audio/video synchronizing
capability (“Lip-Sync”) for HDMI. If the automatically set delay time is unsuitable, set it to OFF and adjust the delay time
manually. (For details on the auto delay feature, refer to the operating instructions of the display component.)
■When selecting the “C.WIDTH (Center Width)”
• This adjusts the center image so it may be heard only from the center speaker, only from left/right speakers as a phantom
image, or from all three front speakers to varying degrees.
• The control can be set in 8 steps from 0 to 7 (default value : 3)
■Note :
• This control valid only when the center speaker is not set to NO.
■When selecting the “DIMEN (Dimension)”
• This gradually adjusts the sound field either towards the front or towards the rear. The control can be set in 7 steps from -3
to +3 (default value : 0)
■When selecting the “PNRM (Panorama)”
• This mode extends the front stereo image to include the surround speakers for an exciting “wraparound” effect with side
wall imaging. Select “OFF” or “ON” (default value : OFF).
25
ENGLISH
■When selecting the “DRC (Dynamic Range Control)”
• This function compresses the dynamic range of previously specified parts of Dolby Digital, Dolby TrueHD, Dolby Digital
Plus, DTS, DTS-HD High Resolution Audio or DTS-HD Master Audio sound track (with extremely high volume) to minimize
the difference in volume between the specified and non-specified parts. This makes it easy to hear all of the sound track
when watching movies at night at low levels.
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 26
Meijer.com
ENGLISH
Continued
■When selecting the “D.VOL (Dolby Volume)”
• Dolby Volume is an intelligent system that improves the perceived audio frequency response at lower listening levels and
corrects for volume inconsistencies between sources (e.g. a jazz radio station and a DVD) and between programming (e. g. a
TV show and advertisement breaks).
OFF (Default value) : To turn off the Dolby Volume function. (The DOLBY VOLUME indicator goes off.)
↕
ON : To turn it on. (The DOLBY VOLUME indicator lights up.)
• If the Dolby Volume is set to ON, it will be automatically turns on the Volume Modeler that maintains the same perceived
listening experience as the reference level experience.
■Note :
• If the Dolby Volume is changed to OFF, the volume level may be increased high.
◆When the Dolby Volume is set to ON
①. Press the ENTER button to enter the Dolby Volume setup.
• Then “LVL (Volume Leveler)” is displayed for several seconds.
②. Press the CURSOR UP/DOWN buttons to select the desired parameter.
• Each time these buttons are pressed, the parameter mode changes as follows :
→“LVL”
↔ “AMOUNT”
←
(Volume Leveler)
→“C/O”
↔
(Calibration Offset)
(Volume Leveler Amount Control)
M/S
↔
(Mid/Side mode)
HALF
←
(Half mode)
③. Press the CURSOR LEFT/RIGHT buttons to adjust the selected parameter as desired.
◆When selecting the “LVL” (Volume Leveler)
• The Volume Leveler maintains the perceived loudness of all content for example, from different channels or input sources.
OFF : To turn off the Volume Leveler function.
↕
ON (default value) : To turn it on.
■Note :
• If Volume Leveler is turned off, no level matching between sources and program material is performed. This is not the same as
turning Dolby Volume off as volume related frequency response processing is still active.
◆When selecting the “AMOUNT” (Volume Leveler Amount Control)
The Volume Leveler Amount adjusts the amount of leveling applied by the Volume Leveler.
• The control can be set in 11 steps from 0 to 10 (default value : 9)
◆When selecting the “HALF” (Half mode)
If the Half mode is set to ON, the Volume Modeler does not apply volume contour gains for playback levels higher than reference
level; just the volume setting, as a flat spectrum gain, is applied.
OFF (default value) : To turn off the Half mode.
↕
ON : To turn it on.
◆When selecting the “M/S” (Mid/Side mode)
The Mid/Side processing can improve stability of some stereo material.
OFF (default value) : To turn off the Mid/Side mode.
↕
ON : To turn it on.
◆When selecting the “C/O” (Calibration Offset)
The Calibration Offset allows you to compensate for speaker efficiencies and listening position.
• The control can be set from -15 to +15 dB (default value : 0 dB) and this should normally produce a good result when you set
the speaker levels on this receiver using a SPL (Sound Pressure Level) meter.
26
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 27
Meijer.com
Adjusting the current channel level
1.
ENGLISH
• After adjusting each channel level with test tone, adjust the channel levels either according to the program sources or to suit
your tastes. (For details, refer to “When selecting the CHANNEL LEVEL” on page 52.)
Select the desired channel.
• Each time this button is pressed, the channel is selected as
follows:
→L →C → R →SR →(SBR →SBL)
Front
Left
Center
Front
Right
SW
Subwoofer
Surround Surr. Back Surr. Back
Right
Right
Left
←
SL
←
Surround Left
( ) : Possible only when the surround back speaker is set to
2ch (“x2”) or 1ch (“x1”)
• When the channel level disappears, press this button
again.
• Depending on the speaker settings (“NO”), etc., some
channels cannot be selected.
2. Adjust the level of the selected channel as desired.
• The channel levels can be adjusted within the range of
-15 ~ +15 dB.
■Note:
• When selecting the VuNow as an input source, you
cannot adjust the channel levels.
3. Repeat the above steps 1 and 2 to adjust each channel level.
27
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 28
Meijer.com
LISTENING TO RADIO BROADCASTS
Manual tuning
ENGLISH
Auto tuning
1. Select the desired band.
• Manual tuning is useful when you already know the
frequency of the desired station.
• After selecting the desired band, press the TUNING
buttons repeatedly until the right frequency has been
reached.
Auto presetting
• Auto presetting function automatically searches for FM
stations only and store them in the memory.
• While listening to FM radio broadcasts, press and hold
down the ENTER button for more than 2 seconds.
• Each time this button is pressed, the band changes as
follows :
→ FM ST → FM MONO
(“ST” lights up)
(“ST” goes off)
• When FM stereo broadcasts are poor because of weak
broadcast signals, select the FM mono mode to reduce
the noise, then FM broadcasts are reproduced in
monaural sound.
2. Press the TUNING buttons for more than 0.5
second.
• Then “AUTO MEM” flickers and this receiver starts auto
presetting.
• To stop auto presetting, press this button again.
• Up to 30 FM stations can be stored.
■Notes:
• FM stations of weak strength cannot be memorized.
• To memorize weak stations, preform “Manual presetting”
procedure with using “Manual tuning” operation.
• The tuner will now search until a station of sufficient
strength has been found. The display shows the tuned
frequency and “TUNE”.
• If the station found is not the desired one, simply repeat
this operation.
• Weak stations are skipped during auto tuning.
28
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 29
Meijer.com
Presetting radio stations
Tuning to preset stations
• You can store up to 30 preferred stations in the memory.
• After selecting the tuner as an input source, select the
desired preset number.
ENGLISH
1. Tune in the desired station with auto or manual
tuning.
2. Press the ENTER button.
• “MEM”, etc. flicker.
3. Select the desired preset number (1~30) and
press the ENTER button.
• The station has now been stored in the memory.
• A stored frequency is erased from the memory by
storing another frequency in its place.
4. Repeat the above steps 1 to 3 to memorize
other stations.
■MEMORY BACkUP FUNCTION
The following items, set before the receiver is turned off,
are memorized.
• INPUT SELECTOR settings
• Surround mode settings
• Preset stations, etc.
29
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 30
Meijer.com
ENGLISH
ABOUT VuNow Pod
This receiver is equipped with the VuNow Pod that delivers a variety of video contents and internet radio audio, etc. via
broadband to your TV without the use of a personal computer (PC). The VuNow Pod provides an ultimate experience that
allows you to view, download, and store your favorite videos on it.
■The VuNow Pod allows you to :
• Access internet video content via broadband internet connection directly on your TV.
• Support for wired or wireless internet connectivity.
• Direct Access to popular websites and Internet TV & Radio channels.
• Access premium channels like CinemaNow and PlayOn.
• Watch YouTube videos by categories.
• Rapidly search for internet videos using the built-in video search engine.
• Share media contents from a computer or a NAS device over a network using Digital Living Network Alliance(DLNA)
compliant media server including Windows Media Player(WMP).
• Play personal content like music, videos, and photos stored on any PC on the Local Area Network(LAN) connection.
• Access internet radio audio.
• Use a USB memory device for storage to download rented videos.
• Play personal content directly from the USB memory device.
• Bookmark a library of your favorite videos.
• VuNow Pod is capable of connecting directly to the Internet and includes state-of-the-art Digital Rights Management (DRM)
technology. Using the DRM technology, VuNow Pod ensures full protection of content provided by content providers.
• The VuNow Service provides access to a wide variety of videos. These videos are available for Rent or for viewing (Watch).
Availability of videos for Rent or for Watch is displayed on the screen, when a video is selected.
• A video available for Rent can be downloaded on your VuNow Pod for future play whereas Watch allows you to stream and
play the video directly on your TV.
• VuNow Pod supports USB memory device which can be used to play the stored media contents and also used as storage to
download rented videos. You can select and rent the Video of your choice.
■Disclaimer
This is an original work by Verismo Networks and is protected by applicable copyright laws worldwide. Neither the whole nor any
part of this work may be reproduced, stored, adapted or transmitted, published, modified in any form or by any means
whatsoever, mechanical, electronic, photographic, graphic, optic recording or otherwise, translated into any language or
computer language, without the prior written permission of Verismo Networks.
Unless by way of a separate agreement, Verismo Networks makes no representations or warranties with respect to the contents
hereof, including their accuracy and error-free nature, and shall not be responsible for any loss or damage caused to the user by
the direct or indirect use of this information.
Furthermore, Verismo Networks reserves the right to use the subject matter of this notice in any manner whatsoever, with no
obligation to notify the recipient of the subject matter of any changes made hereto.
All products referenced herein are trademarks of the company and/or of those referenced.
“Portions of this product are the copyright of Verismo Networks, Inc. All intellectual property rights in such portions of the product
and documentation are owned by Verismo and are protected by United States copyright laws, other applicable copyright laws
and international treaty provisions. Verismo and its suppliers retain all rights not expressly granted.
Copyrightⓒ 2009-10 Verismo Networks
30
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 31
Meijer.com
Remote Controls for VuNow Pod
• Each function on the remote control for VuNow Pod is explained in the following table.
Function name
Functions
VuNow
selector
Select VuNow as an
input source.
MENU
Display menu
options for the
current screen.
SEARCH
Button Symbol
Function name
ZOOM/PAGE
+/-
Provide a context
sensitive relevant
search for a media
title.
INFO
BACK
Returns to the previously
displayed screen. To go to
the home page, keep this
button pressed for a few
seconds.
Select an option or a media
title.
Stop the current
activity.
OK/SELECT
PAUSE
Pause the video
PLAY
HOME MENU
REVERSE(
FORWARD(
SKIP
Returns to the home
page
Used to zoom in/zoom out
in playback mode. In other
pages used as PAGE UP/
PAGE DOWN buttons.
Playback options(Navigate
to previous/next video, fastforward, rewind, pause/play,
zoom in/zoom out) for the
currently playing media title.
STOP
REWIND( )/
Rewind or fast
FAST
forward the video
FORWARD( )
Functions
Play the video
)/
)
UP/DOWN/
RIGHT/LEFT
Jump to the previous or the
next video
Navigate up, down, to the
right or left on the screen.
enJoYInG InteRnet VIDeos
■Note:
• You can enjoy viewing internet video contents via either the HDMI(given prioity) or the (composite) VIDEO MONITOR OUT
only, not the COMPONENT MONITOR OUTs.
1. Select the VuNow as an input source.
• Then the VuNow Pod home page is displayed.
31
ENGLISH
Button Symbol
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 32
Meijer.com
ENGLISH
2. Press the CURSOR UP/DOWN buttons to select the desired feature, then press the “ENTER” button.
3. Press the CURSOR buttons to select the desired item, then press the “ENTER” button.
• Then the selected item will be played back or
performed.
• When the sub-menu of the selected item is
displayed, repeat this step to select the desired
item.
• To go back to the previous menu, press the
“RETURN” button.
Features
My Collection : This feature
lists videos that you have
recently accessed,
bookmarked, downloaded, or
rented through the VuNow
Pod.
Items
• Browse USB Disk : The VuNow Pod enables media contents on your USB storage device to
be watched on your wide screen TV. The USB storage device also acts as storage to
download and store the rented videos from VuNow service and CinemaNow videos, etc. (See
“Browse USB Disk” on page 35.)
• Rented Videos : The videos listed in Rented Videos are downloaded or streamed from movie
channels upon completion of payment. Videos are automatically deleted from the list upon
expiration.
• Home Network : This is a key feature of VuNow Pod that enables you to share and enjoy the
digital media stored in your PC on your TV. The digital media includes music, video, and
photos. (See “Home Network” on page 35.)
• My Channels : This option displays videos added to My Channels while using the Internet TV
& Radio on the VuNow Pod. Listed videos provide details about the channel title, date, time of
adding. (See “My Channels” on page 36.)
• Bookmarks : This option displays videos added to bookmarks while using various features of
VuNow Pod. Listed videos provide details about the video title, date, time of adding as
bookmark, and name of the channel from which VuNow Pod accessed the video. (See
“Bookmarks” on page 36.)
• Recently Played : This option lists recently viewed videos and helps you to have instant
access to the videos that you have already viewed but do not remember the details. (See
“Recently Played” on page 37.)
32
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 33
Meijer.com
YouTube : This is the most
popular video sharing website
on the internet. This enables
you to upload, view, and share
videos with other YouTube
users.
Popular Websites
Options
• Featured : This option lists the YouTube videos for the day. This includes a list of videos
suggested by the YouTube staff. The listed video displays the title, duration of the video,
number of views, rating on 5 counts and the source of the video.
• Search : This option enables you to search for a specific video on the YouTube website. You
can use this option when you want to watch a YouTube video of your choice. It lists videos that
match the string of characters entered in the search box. (See “Search” on page 37.)
• Login : This option enables you to access your existing YouTube user account. Before
continuing to access your YouTube account using VuNow Pod, ensure that the account is
created using a PC. VuNow Pod can remember up to 4 user names with the option to
remember the password(s). Using Login you can access your customized options on the
YouTube such as My Subscription, My Playlist, My Favorites, and My Uploads. (See “Login”
on page 38.)
• Most Viewed : This option displays the list of the most viewed videos on the YouTube website.
This list is based on the number of views for a video.
• Most Recent : This option lists the most recently uploaded videos to YouTube website. This
enables you to view the latest entries available on YouTube. You will see a list of recently
viewed videos providing details about the duration of the video, number of views for the video,
and the name of the album.
• Top Favorites : This option lists the videos that have maximum number of favorite setting by
the users. This enables you to view the top favorite video on the YouTube website. The videos
are grouped under relevant categories. The listed video displays the title, duration of the video,
number of views, rating on 5 counts and the source of the video.
• Top Rated : This option lists the videos that have received top rating by the users. The videos
are available in various categories. This enables you to search a video among the YouTube’s
Top Rated. The listed video displays the title, duration of the video, number of views, rating on
5 counts and the source of the video.
• Channels : This option in YouTube enables you to access the popular content on YouTube
website provided by VuNow service. The channels page enables you to navigate to the video
listing page to access video content on YouTube.
• Settings : This option allows you to choose the specific country for YouTube region. From the
list of countries, select the country, then the VuNow Pod will point to the corresponding
YouTube site.
The popular website feature enables you to enjoy the popular video sites available on the
internet. Videos from various popular websites like PlayOn, CNN Video, ABC news, ESPN, and
PGATour, etc. are available for viewing.
(• For details on PlayOn, see “About PlayOn” on page 41.)
33
ENGLISH
Features
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 34
Meijer.com
Features
ENGLISH
Video Search
Movies
Internet TV & Radio
Options
The Video Search feature enables you to search any video available on the internet. This
search using the VuNow Pod is not specific to any website. The search is based on the string of
characters entered in the search box. The search result will list the top level folders available on
the internet. (See “Video Search” on page 39.)
The Movies feature enables you to access movie channels provided by VuNow service.
Accessing these channels helps you to watch the programs live or rent the video for future
viewing. These channels include the video on demand as well as the premium channels like
CinemaNow. (See “Movies” on page 39.)
The Internet TV & Radio feature makes it possible to view digital content live on your TV. The
VuNow Pod provides you an option to view your favorite TV or radio channels in a specific
region.
Settings : This allows you to
• Network : This helps you to configure the network settings. (See “Network” on page 42.)
manually configure the settings
• Product Settings
of the VuNow Pod.
✽ TV Resolution : This enables you to manually select the TV resolutions.
✽ HDTV Auto Resize : This enables some TVs to automatically re-size the video when playing
a low resolution video.
✽ Playback Options : This enables you to set the playback option while viewing personal
digital media.
✽ Time Zone : This enables you to set the time zone to your region.
✽ Language : By default, the language is set to English.
✽ Product Info : This provides you with the details about your VuNow Pod such as the
current configuration, product ID, VuNow Pod software version (Client Version), latest
software version available on the VuNow Server(Server Version) and Time Zone details.
• Internet Speed Test : This enables you to check the downlink speed. This helps you to
calculate the time required for an intended download.
• Factory Defaults : This allows you to take the VuNow Pod to the factory defaults. This also
provides you the option to retain the video contents associated with the VuNow Pod.
• Eject USB Disk : To protect the USB storage device, it is recommended that you use this
option before removing the USB storage device from this receiver.
• Third Party Applications : In the future, when applications are developed by our partners for
VuNow Pod, you will have an option to install these on the Pod. This will allow you to manage
these applications when they are available.
• Because the operations for the features and the options written in bold font differs, follow their own procedures.
■Notes :
• The features and the options may vary based on the VuNow service offerings.
• This manual explains the basic operation for the VuNow Pod. Therefore, for details, visit the VuNow website at www.vunow.com.
• A TV screen may be burned out if a static picture is displayed for a long time in the stop mode, etc.
To prevent this, this unit automatically activates the screen saver function if a static picture, etc. is displayed for over 5 minutes.
To cancel the screen saver function, press the CURSOR buttons, etc.
34
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 35
Meijer.com
■To play the contents stored in your PC using
media sharing of Windows Media Player.
■To view the contents of a USB storage device
1.
1. Insert the USB storage device into the USB
Run Windows Media Player on your PC.
2. Select “Library” tap in the menu bar, and then
connector.
select “Media Sharing”.
• Then you will receive a message asking for direct access
to these media contents for several seconds.
3. In the “Media Sharing” dialog box, select the
“Share my media” check box.
2. Select “YES” with using the CURSOR and the
“ENTER” buttons.
4. In the list of devices below the “Share my media”
check box, select the newly added VuNow Pod.
• Then the contents of the USB storage device is
displayed.
• In such a case that the USB device is already connected,
select “My Collection” feature from home page, then
select “Browse USB Disk” option.
5. On this receiver, select “My Collection” from
home page.
6. Select “Home Network” in “My Collection”
3. Select the desired content and play it.
section.
• Then the PC list appears.
• Then the selected content will be played.
7.
■Note :
• To remove the USB device, perform “Eject USB Disk”
on page 34.
Select your PC.
• Then the folders available in your PC are displayed.
Home Network
You can use any Digital Living Network Alliance(DLNA)
compliant Media Server like Windows Media Player to
serve the digital contents to the VuNow Pod.
Features available under Home Network are as follows :
• Music - Enables you to listen to musics stored in your PC.
You can run the tracks in the background while
viewing slideshows.
• Video - Enables you to view videos stored in your PC on
TV.
• Picture - Enables you to view photos stored in your PC as
slideshow on TV.
8.
Select the desired folder.
9.
Select the desired content and play it.
■Playable digital contents.
Music files
File type File extension
■Note :
• The VuNow Pod display options will be dependent on
the support provided by the PC Media Server. The
features and description in this section are indicative.
To play the digital contents, you have to enable the
sharing option on the PC media server.
Video files
File type
Codec type
File extension
MP3
.mp3
VC1
Basic
.wmv
WAV
.wav
H.264
Basic
.mov, .mp4,
.avi
WMA
.wma
MPEG2
Premium
.mpg, .mpeg,
.vob
• The playable photo file formats are .jpg and .jpeg.
35
ENGLISH
Browse USB Disk
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 36
Meijer.com
ENGLISH
My Channels
Bookmarks
■To add a channel to My Channels
■To Bookmark a video
• You can add any internet channel to this list.
• You can bookmark a video in “YouTube”, “Popular
Websites”, “Movies” section, etc.
1.
Select “Internet TV & Radio” from home page.
2.
Select the desired of internet channels.
3.
Press the “DISC MENU” button.
Select a video.
2.
Press the “DISC MENU” button.
The the options of “Bookmark this Video” is displayed for
several seconds.
• Then the options of “Add To My Channels” is displayed
for several seconds.
3.
4. Select “Add To My Channels”.
Select the “Bookmark this Video”.
• The selected video gets bookmarked.
■To play a bookmarked video
• The selected channel is added to the list.
■To play a channel listed in the “My Channels”
1.
1.
1.
Select “My Channels” in “My Collection” section.
Select “Bookmarks” in “My Collection” section.
2. Select a a bookmarked video in the list of
Bookmarks and play it.
2. Select a channel in the list of channels and play
it.
• Then the selected video is played.
• Then the selected channel is played.
■To delete a bookmark
■To remove a channel
1.
Select “Bookmarks” in “My Collection” section.
1.
Select “My Channels” in “My Collection” section.
2.
Select a video in the list of Bookmarks.
2.
Select a channel in the list of channels.
3.
Press the “DISC MENU” button.
3.
Press the “DISC MENU” button.
• Then the options are displayed for several seconds.
Options
Then the options are displayed for several seconds.
Options
Description
Delete this Bookmark
Deletes the selected bookmark
Jump to Page
Allows you to jump to a page if the
entries are more
Remove from My Channels Removes the selected channel
Jump to Page
4.
Allows you to jump to a page if the
entries are more
Description
4.
Select the “Delete this Bookmark”
• Then the selected bookmark is deleted.
Select the “Remove from My Channels”
• Then the selected channel is removed.
36
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 37
Meijer.com
Key Name
MORE
■To play a recently played video
1.
2.
Select “Recently Played” in “My Collection”
section.
Alphabet
To enter letters from the alphabet keys.
Numeric
To enter numbers from the numeric keys.
Special
character
To enter special characters such as @, &, %, etc.
3.
Select a video in the Recently played list and
play it.
Uses
To display more special characters needed to
enter a string.
Enter the search string using the soft keypad.
• Then the list of videos searched is displayed.
■To clear a video in the Recently Played list
1.
Select “Recently Played” in “My Collection”
section.
2.
Select a video in the Recently Played list.
3.
Press the “DISC MENU” button.
4.
Select a video in the search list and play it.
• Then the selected video is played.
■YouTube search menu options
• During YouTube search, press the “DISC MENU” button.
Then the options are displayed for several seconds.
Options
Bookmark this Video
Bookmark this Search
Adds the search string to Bookmarks in
“My Collection” section.
Jump to Page
Allows you to jump to a page if the entries
are more.
Then the options are displayed for several seconds.
Options
Description
Clear Recently Played
Removes the selected video
Add to My Channels
Adds the selected video to My
Channels
Jump to Page
Allows you to jump to a page if the
entries are more.
4.
Description
Bookmarks and lists the video under
“Bookmarks” in “My Collection” section for
future viewing.
■YouTube Playback Menu Options
• During YouTube playback, press the “DISC MENU” button.
Then the options are displayed for several seconds.
Select the “Clear Recently Played”.
Options
• Then the selected video is removed.
Description
Related Videos
Displays list of related videos on a video
listing page.
■To search a video on the YouTube website
Bookmark this Video
Bookmarks and lists the video under
“Bookmarks” in “My Collection” section for
future viewing.
1.
Add to Favorites*
Adds to your customized option
- My favorites.
Rate this Video*
Enables you to rate the selected video.
Flag as Inappropriate*
Enables you to flag those video that do not
belong to the listed category.
Search
2.
Select “YouTube” from home page.
Select “Search” in “YouTube” section.
*: These option will be available when you login to your
• Then the soft keypad appears.
personal YouTube account.
• The table below lists keys and uses of soft keypad.
Key Name
Uses
DEL
To delete the last character entered in the
search box.
CLR
To clear the search string entered in the search
box.
Space
To insert a space(blank) in the search box.
37
ENGLISH
Recently Played
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 38
Meijer.com
■Logging in to an existing user account
Login
• The “Login” option allows you to access your YouTube
account and view your customized options on TV at the
click of a button. This enables you to search, view and
bookmark the selected video apart from enjoying other
privileges such as viewing related videos, adding the
selected videos to your favorites list, rating videos, and
flagging the selected video.
ENGLISH
■Adding an account
The “Add Account” option allows you to add your existing
YouTube account to VuNow Pod. Thus this option enables
you to access YouTube using VuNow Pod.
■Note :
• Up to four user account names can be added.
1.
Select “YouTube” from home page.
1.
Select “YouTube” from home page.
2.
Select “Login” in “YouTube” section.
2.
Select “Login” in “YouTube” section.
3.
Select the “Add Account” option.
3.
Select your user name.
• Then the user name entry screen appears with a soft
keypad.
• Then the selected user name is listed in “YouTube”
section.
4. Using the soft keypad, enter the user name and
■Changing YouTube user account
press the “OK” key.
• The “Change User” option enables you to access multiple
YouTube accounts which are added on the VuNow Pod.
This option thus enables more than one person to access
their YouTube accounts using VuNow Pod.
• Then the password entry screen appears.
5.
Using the soft keypad, enter the password.
• To save the password in the VuNow Pod, select the
“Remember Password” and set it to on pressing the
“ENTER” button.
6.
Select “Change User” in “YouTube” section.
3.
Select the user name you want to change.
■Logging out of YouTube
• The “Remove Account” option enables you to remove your
YouTube user account from the VuNow Pod. However, you
can login to these accounts through the PC.
1.
Select “YouTube” from home page.
2.
Select “Login” (or “Change User”) in “YouTube”
section.
1.
Select “YouTube” from home page.
2.
Select “Change User” in “YouTube” section.
3.
Select “Logout”
• Then you will be logged out.
Select the “Remove Account” option.
Then the Remove Account screen appears displaying the
existing user name.
4.
2.
• Then the selected user name is changed to in “YouTube”
section.
To access your YouTube account, select your
user name and press the “ENTER” button.
■Removing an account
3.
To change the user when logging in to on user
account, select “YouTube” from home page.
Press the “OK” key.
Then the user name is listed in “YouTube” section.
7.
1.
Select the user name.
Then the selected user account is removed from the
VuNow Pod.
38
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 39
Meijer.com
■Video Renting Options
Video Search
Select “Video Search” from home page.
Options
• Then the soft keypad appears.
2. Perform the steps 3 and 4 in “Search” procedure
on page 37.
Description
Delete this Download
Deletes the selected download.
Pause this Download
While downloading, pauses the selected
downloaded.
Pause All Downloads
While downloading, pauses all the
downloads in progress
Resume this Download* Resumes the selected paused download.
Resumes and queues all paused
downloads.
■Video Search Menu Options
Resume All Downloads*
• During video search, press the “DISC MENU” button. Then
“Bookmark ~” option is displayed for several seconds.
*: These options will be available when you have paused
video(s) download.
Movies
■Watching videos
■About Video on Demand
• The videos available for watch can be streamed and played
directly on TV.
The Video on Demand is one of the main features of VuNow
Pod. It enables you to Rent or Watch your favorite videos.
Watching videos live or renting is defined by VuNow Service.
1.
Select “Movies” from home page.
2.
Select a channel.
3.
Select a category.
4.
Select a video in the list.
■Renting (Downloading) videos
• The videos available on Rent can be downloaded onto the
VuNow Pod. Thus you can create your own collection of
videos within the “My Collection” feature. To download
videos, you need to have a USB storage device connected
for storage.
1.
Select “Movies” from home page.
2.
Select a channel.
• Then the information on the selected video appears.
5.
3.
Select a category.
4.
Select a video in the list.
Then the information on the selected video appears.
5.
Select the “Rent” key.
39
Select the “Watch Now”.
ENGLISH
1.
While downloading the rented video, press the “DISC MENU”
button. Then the options are displayed for several seconds.
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 40
Meijer.com
ENGLISH
■About CinemaNow
4. Enter your user name and password to access
CinemaNow is a Web-based digital video distribution
company. The CinemaNow library contains approximately
10,000 feature-length films, short films, music concerts and
television.
With the most diverse range of content available on the
internet, CinemaNow is a good choice for viewers seeking
wide and unique range of videos that are not available on
network television, cable, or at the local video store.
VuNow Pod allows the user to browse, select and play this
CinemaNow content directly on the TV. You also have an
option to use your PC to push your rented or bought content
to your VuNow Pod.
your CinemaNow account.
• Your VuNow Pod is now registered with the CinemaNow
account.
■Note :
• This is a one time activity and not required again unless
you explicitly logout from the CinemaNow Zone.
■To buy or rent videos from the CinemaNow
account (using PC)
■To create your CinemaNow Account
You need to have a CinemaNow account to use the
CinemaNow feature of your VuNow Pod.
You can access CinemaNow movies on your VuNow Pod
using an account that is specifically created on this website.
1.
Using your PC, visit the CinemaNow website at
www.cinemanow.com.
2. Click on the REGISTER option that appears in
1.
Log into your CinemaNow account at
www.cinemanow.com on the PC.
2.
Select video to be bought or rented.
3.
Select the “BUY NOW” or “RENT NOW”.
4. Select the “CHECKOUT” and perform the
the top right corner of the window.
checkout procedure.
3. Fill in the necessary information in the provided
5. Select the “Watch It On” to match with your
fields and click on the SUBMIT button.
registered VuNow Pod.(“registered user namePod”)
• An account will be created. You can use this account to
access CinemaNow movie from the VuNow Pod.
6.
■Note :
• Accounts created only on www.cinemanow.com can be
accessed from your VuNow Pod.
• Then the selected video will be pushed to your VuNow
Pod. Ensure that you have the USB storage device
connected to this receiver.
■To register CinemaNow account from VuNow Pod
7.
To enjoy CinemaNow contents via VuNow Pod, The VuNow
Pod registration will be needed.
1.
Select “Movies” from home page.
2.
Select the CinemaNow channel in the list.
Within 90 seconds of pushing the video to your
VuNow Pod, you will get a pop up message
about the availability of the title. Please select
“OK”.
Then the download of the video will start immediately.
8.
• Then the options of the CinemaNow appears.
3.
Select the “START DOWNLOAD”.
Select “My Collection” from home page.
9. Select “Rented Videos” in “My Collection”
Select “Login”.
section.
• Then the user name entry screen appears with a soft
keypad.
• Then the list of available videos is displayed.
10.
40
Select a video to start play.
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 41
■To buy or rent videos directly using VuNow Pod
■Search menu options
■Note :
• Ensure that the user is registerd at www.cinemanow.com
with the credit card information.
• While searching for a video, press the “DISC MENU”
button. Then the options are displayed for several seconds.
• For details, see the table explained in “YouTube search
menu options” on page 37.
1.
■Playback options while playing videos.
Perform the steps 1~4 “To register CinemaNow
account from VuNow Pod” procedure on page 40.
1.
2.
Select the option in “CinemaNow” section.
• Then a progress bar and the playback options are
displayed for several seconds.
• Then a wide array of movies classified in various
categories is displayed.
3.
While playing a video, press the “DISPLAY”
button.
Options
Select a video to be rented.
Description
Goes back to the previous video in the list.
• Then information on the selected video appears
displaying the cost of rent.
Rewinds the video.
Pauses/Plays the video.
4.
Select the “Rent” and confirm the payment.
Fast forwards the video.
Jumps to the next video in the list.
• The video is then queued for download and is stored
under “Rented Videos” in “My Collection” section.
Resizes the video using zooming in or zooming out.
■To search a video
1.
Select “Movies” from home page.
2.
Select the CinemaNow channel in the list.
2.
Select a option and press the “ENTER” button.
• Then the options of the CinemaNow appears.
3.
■About PlayOn
Select “Search”.
The VuNow Pod also supports the PlayOn feature.
PlayOn lets you watch Netflix, Hulu, CBS, YouTube, CNN,
ESPN and more directly on the TV and also enables you to
enjoy your local PC media files with its newly released local
media sharing feature.
You can see all your digital photos, listen to your stored
music, and watch videos on your PC through the same
PlayOn Digital Media Server.
• Then the soft keypad appears.
4. Perform the steps 3 and 4 in “Search” procedure
on page 37.
• For details on operation for PlayOn, visit the PlayOn
website at www.themediamall.com/playon.
41
ENGLISH
Meijer.com
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 42
Meijer.com
✽Wireless Network connection
ENGLISH
Network
The VuNow Pod can be connected to your home network
with wired connection or wireless connection. (For details,
refer to “CONNECTING TO NETWORK” on page 10.)
The network connection can be established by using the
“Network Wizard” or “Advanced” options available within the
VuNow Pod.
■Configuring the VuNow Pod using Network Wizard
2.
Select “Network” in “Settings” section.
2.
Select “Wireless”.
3.
Select your wireless network.
• In such a case that the WEP input list appears, perform
the following steps 4 and 5.
✽Wired Network connection
Select “Settings” from home page.
Perform the steps 1~3 in “Wired Network
connection” procedure above.
• Then the Wireless Network list appears.
It provides you with the option to select wired or wireless
mode. Wired is the recommended mode to be used while
connecting the VuNow Pod to a network.
1.
1.
4.
Select your WEP key type.
• Then the soft keypad appears.
5. Enter the WEP key for the wireless network and
• Then the configuration type screen appears.
3.
press “OK” key.
Select “Network Wizard”.
• Then the VuNow Pod automatically detects your Home
Network, Internet settings and VuNow Pod server
settings and conducts a download speed test of the
connection.
• Then the network type screen appears.
4.
Select “Wired [Preferred]”.
6. Select “Done” to confirm successful connection
establishment.
• Then the VuNow Pod automatically detects your Home
Network, Internet settings and VuNow Pod Server
settings and conducts a download speed test of the
connection.
■Configuring the VuNow Pod using Advanced
• The Advanced option enables you to manually configure
the VuNow Pod on your home network in the Wired and
the Wireless mode.
Configuring the VuNow Pod using the Advanced option is
recommended only if you are aware of the settings used
for your home network and can customize them.
5. Select “Done” to confirm successful connection
establishment.
✽Advanced Wired Mode
1.
Select “Settings” from home page.
2.
Select “Network” in “Settings” section.
• Then the configuration type screen appears.
3.
Select “Advanced”.
• Then the “Settings” screen appears.
42
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 43
Meijer.com
• The table below describes the options available on the
“Settings” screen.
Option Type
Description
Network
Wired,
Wireless
According to your home network
connection, choose it.
IP Settings
Auto, Static
Choosing Auto would enable
DHCP service, or you can set it to
static. By default, the Auto is set.
• If you may receive a message to upgrade the VuNow
Service, we recommend that you upgrade your VuNow
Service immediately.
■Notes:
• It is recommended that you upgrade to the latest version
to enjoy the new features available. Other reason for
upgrading are to fix known security holes and bugs.
• If you do not get the upgrade message, please go to
“Settings” -> “Product Settings” -> “Product Info” and note
down the product ID, client version and server version. Email the data to the contact details provided at
support@VuNow.com
Following fields have to be set manually if the IP Settings is
set to static.
The IP address of the VuNow
Pod.
IP Address
IP address
Subnet Mask
Subnet mask
Subnet mask of your network.
Gateway
Gateway IP
address
IP address of the gateway.
DNS
DNS server IP
IP address of the DNS server.
address
Cancel
To exit Network.
Save
To confirm the settings.
4.
Set the “Network” to “Wired”.
5. Set each setting and select “Save” on the
“Settings” screen.
✽Advanced Wireless Mode
1.
Perform the steps 1~3 in “Advanced Wired
Mode” procedure on the previous page.
2.
Set the “Network” to “Wireless”.
3.
Set each setting and select “Next” on the
“Settings” screen.
• Then the next screen appears displaying settings such as
SSID, Security and so on.
4. Select “Scan” to search for available wireless
networks at “SSID” option.
• Then the wireless network list appears.
5.
Select your wireless network.
6. Set each setting and select “Save” on the next
screen.
43
ENGLISH
Option
Name
Upgrading the VuNow Pod from the Vunow
Server
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 44
Meijer.com
OTHER FUNCTIONS
ENGLISH
Operating the sleep timer
• The sleep timer allows the system to continue to operate for a specified period of time before automatically shutting off.
• To set the receiver to automatically turn off after the specified period of time.
• Each time this button is pressed, the sleep time changes
as follows:
→ 30 → 60 → 90 → OFF
Unit : minutes
• While operating the sleep timer, “
“ lights up.
• When the sleep time is selected, the fluorescent display is
dimly lit.
Adjusting the brightness of the fluorescent display
• Each time this button is pressed, the brightness of the
fluorescent display changes as follows:
→ ON →
dim
→
OFF
• In the display OFF mode, if some buttons are pressed, the
display OFF mode may be canceled for several seconds
depending on operation status.
■Note:
• When selecting the VuNow as an input source, you cannot
adjust the brightness of the fluorescent display.
Displaying the operation status
During playback,
• Each time this button is pressed, the display mode
changes as follows:
→
Surround
mode
→
Volume
→
Input
source
■Note:
• When selecting the VuNow as an input source, you cannot
check the operation status.
44
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 45
Meijer.com
ROOM2 SOURCE PLAYBACk
■Notes:
• Only the analog input signal from the ROOM2 source can be heard. So, be sure to make analog audio connection and select
analog input for ROOM2 source.
• Even when this receiver enters the standby mode, in such a case that “R2”, etc. light up dim and the SURROUND </>,
STEREO and VOLUME -/+ buttons on the front panel light up blue as it does in the operating mode, meaning only the
ROOM2 circuitry operates, the ROOM2 source can be played independently.
• When you do not use the ROOM2 function, turn off the ROOM2 function to save electricity.
1. Turn on the ROOM2 function.
• “ROOM2 ~” is displayed for several seconds.
• Each time the ROOM2 button is pressed, the ROOM2
mode changes as follows :
ON : To turn on the ROOM2 function.
↕ (“R2” lights up.)
OFF : To turn it off. (“R2” goes off.)
■Notes:
• To hear the sound of ROOM2 source from the speakers
connected to the SURROUND BACK/ROOM2 terminal,
you should set the “AMP” to “R2” first. (For details, refer to
“When selecting the AMP ASSIGN” on page 48.)
• When the ROOM2 mode is set to OFF, you cannot select
the ROOM2 input and adjust the ROOM2 volume.
2. Select the desired input as a ROOM2 source.
• Each time this button is pressed, the ROOM2 input can
be selected among CD, AUX, F.AUX, TUNER, VIDEO1,
V2/IPD.
■Note:
• You cannot select VuNow as a ROOM2 source.
3. Adjust the ROOM2 volume.
4. Start play on the component related to the ROOM2 source.
45
ENGLISH
• This function allows enjoying one source in the main room and playing another in a different room at the same time.
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 46
Meijer.com
System Setup
ENGLISH
• The setup menu is displayed on the fluorescent and allows you to perform the setup procedures easily. In most situations, you will
only need to set this once during the installation and layout of your home theater, and it rarely needs to be changed later.
The setup menu consists of 4 main menus; SYSTEM, SET ROOM EQ, SPEAKER SETUP and MULTI ROOM SETUP.
These menus are then divided up into various sub-menus.
1. Turn the setup menu on.
• The setup menu will be shown.
• To turn the menu off, press this button again.
■Notes:
• When the VuNow is selected as an input source, the
system setup cannot be performed.
2. Select the desired menu using the CURSOR UP/DOWN buttons.
3. Confirm your selection.
• When selecting “SYSTEM”, see “SETTING THE
SYSTEM” on page 48.
• When selecting “SET RMEQ”, see “SETTING THE
ROOM EQ” on page 49.
• When selecting “SPK SET”, see “SETTING THE
SPEAKER SETUP” on page 50.
• When selecting “MLT ROOM”, see “SETTING THE
MULTI ROOM SETUP” on page 54.
46
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 47
Meijer.com
■Setup menu flow
• The setup menu flow is as follows :
TONE : OFF / ON
TRE : 0 / -10 ~ +10
PWR-M : OFF / 60 / 30 / 10 / ON
BASS : 0 / -10 ~ +10
SET RMEQ
SPK CFG
F : LARGE / SMALL
C : LARGE / SMALL / NO
S : LARGE / SMALL / NO
SB : LX2 / LX1 / SX2 / SX1 / NO
SW : YES / PLUS / NO
X.OVER
X.OVER : 50 / 80 / 100 / 150 / 200
CH LEVEL
T. TONE : M / A
L : 0 dB / -15 ~ +15
C : 0 dB / -15 ~ +15
R : 0 dB / -15 ~ +15
SR : 0 dB / -15 ~ +15
SBR : 0 dB / -15 ~ +15
SBL : 0 dB / -15 ~ +15
SL : 0 dB / -15 ~ +15
SW : 0 dB / -15 ~ +15
DISTANCE
L : 10.0 FT / 0.1 ~ 30.0
C : 10.0 FT / 0.1 ~ 30.0
R : 10.0 FT / 0.1 ~ 30.0
SR : 10.0 FT / 0.1 ~ 30.0
SBR : 10.0 FT / 0.1 ~ 30.0
SBL : 10.0 FT / 0.1 ~ 30.0
SL : 10.0 FT / 0.1 ~ 30.0
SW : 10.0 FT / 0.1 ~ 30.0
MLT ROOM
ROOM2 : OFF / ON
R2 : TUNER / CD / AUX / F.AUX / VIDEO 1/ V2/IPD
R2VOL : 40 / MIN(0) ~ MAX(80)
• When "RETURN" is selected on a sub-menu, it will returns to the previous menu.
■Notes :
• “MLT ROOM” can be selected only when the “AMP” is set to “R2”. (For details, refer to “When selecting the AMP ASSIGN” on
page 48.)
• During setup menu operation, only the (POWER ON/) STANDBY button and the buttons required for system setup will function.
47
ENGLISH
AMP : BACK / R2
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 48
Meijer.com
SETTING THE SYSTEM
ENGLISH
AMP : BACK / R2
TONE : OFF / ON
TRE : 0 / -10 ~ +10
PWR-M : OFF / 60 / 30 / 10 / ON
BASS : 0 / -10 ~ +10
SET RMEQ
• AMP (AMP ASSIGN) : To assign the surround back channels' power amplifier correctly depending on how to use the speakers.
• TONE : To adjust the tone (bass and treble) as desired.
F : LARGE / SMALL
SPK CFG
• PWR-M (POWER MANAGER) : To set the POWER MANAGER mode depending on how to use the VuNow for power saving.
C : LARGE / SMALL / NO
S : LARGE / SMALL / NO
1. Press the CURSOR UP/DOWN buttons to select
the desired item.
SB : LX2 / LX1 / SX2 / SX1 / NO
SW : YES / PLUS / NO
X.OVER
: 50 / 80 / item
100 / as
150desired.
/ 200
2. Press the CURSOR LEFT/RIGHT
buttons to X.OVER
set the selected
CH LEVEL
T. TONE : M / A
■When selecting the AMP ASSIGN
L : 0 dB / -15 ~ +15
C : 0 dB / -15 ~ +15
R : 0 dB / -15 ~ +15
• The surround back channels' power amplifier can drive the surround back speakers or the ROOM 2 speakers. Depending on
SR : 0
dB /to-15
~ +15
how to use the speakers, you should assign the power amplifier correctly. (For details,
refer
“CONNECTING
SPEAKERS” on
page 8 and “CONNECTING ROOM2 SPEAKERS” on page 9.)
SBR : 0 dB / -15 ~ +15
BACK (SURROUND BACK) : To drive the surround back speakers when connecting
the: 0SURROUND
BACK/ROOM2 channels
SBL
dB / -15 ~ +15
to them.
↕
SL : 0 dB / -15 ~ +15
R2 (ROOM2) : To drive the ROOM2 speakers when connecting the SURROUND BACK/ROOM2 channels to them.
SW : 0 dB / -15 ~ +15
■When selecting the TONE
DISTANCE
L : 10.0 FT / 0.1 ~ 30.0
C : 10.0
FT /lights
0.1 ~up.)
30.0
OFF : To listen to a program source without the tone effect.
(“DIR”
↕
R : 10.0 FT / 0.1 ~ 30.0
ON : To adjust the tone for your taste. (“DIR” goes off.)
SR : 10.0 FT / 0.1 ~ 30.0
◆When the TONE CONTROL is set to ON to adjust the SBR
tone (bass
: 10.0 and
FT /treble)
0.1 ~ 30.0
①. Press the ENTER button to enter the tone adjustment mode.
• Then “TRE ~” will be displayed.
SBL : 10.0 FT / 0.1 ~ 30.0
SL :the
10.0desired
FT / 0.1tone
~ 30.0
②. Press the CURSOR UP/DOWN buttons to select
mode.
SW : 10.0
/ 0.1 ~ 30.0
③. Press the CURSOR LEFT/RIGHT buttons to adjust
the FT
selected
tone as desired.
• The tone level can be adjusted within the range of -10 ~ +10 dB.
: OFF
/ ON to be adjusted to 0 dB (flat level).
ROOMwe recommendROOM2
•MLT
In general,
the bass
and treble
• Extreme settings at high volume may damage your speakers.
R2 : ②
TUNER
/ CD / AUX / F.AUX / VIDEO 1/ V2/IPD
• To complete tone adjustment, repeat the above steps
and ③.
R2VOL : 40 / MIN(0) ~ MAX(80)
■When selecting the POWER MANAGER
→ OFF : To turn on the VuNow circuitry constantly when this unit is turned on.
↕
60 / 30 / 10 : If the specified period of time elapses after selecting the input source other than VuNow, the VuNow circuitry will
↕
be turned off.
→ ON : To turn on the VuNow circuitry when the VuNow is selected as an input source.
48
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 49
Meijer.com
• Room EQ lets you avoid troublesome listening-based speaker setup and achieve good surround sound. Room EQ has the
feature that provides the optimum listening environment at the listening position in your room. You should connect the
supplied microphone to the SETUP MIC jack so that this receiver can analyze the information form a series of test tones
emitted from speakers at listening position and can adjust the size, channel level, distance and frequency response of each
speaker automatically.
• If you want to personalize your speaker setup by making the settings manually, perform the “SETTING THE SPEAKER
SETUP” on page 50.
• After the Room EQ setup has been completed, set the Room EQ as desired. (For details, refer to “When selecting the “EQ
(Room EQ)” on page 24.)
■Preparations
①. Check that the speakers are securely connected to this receiver.
• If your subwoofer has adjustable volume and crossover frequency, set the volume halfway and set the crossover frequency
to the maximum or the low pass filter off.
②. Connect the supplied microphone to the SETUP MIC jack on the front panel.(For details, refer to “SETUP MIC JACK” on
page 12.)
■Notes :
• Because the microphone for Room EQ setup is designed for use with this receiver, to use the Room EQ setup function, do not
use a microphone other than the one supplied with this receiver.
• After you have completed the Room EQ setup procedure, disconnect the microphone.
1. Place the microphone on a flat level surface at the listening position.
• If possible, use a tripod, etc. to attach the microphone at the same height as your ears would be when you are seated in your
listening position.
• Ensure there are no obstacles between the speakers and the microphone.
2. Press the ENTER button to check the speaker configuration when “SET RMEQ” is displayed.
• “SET RMEQ” flickers while the receiver outputs the test tones to determine the speakers present in your setup and then
“CHECK OK” is displayed.
■Notes :
• Try to be as quiet as possible while outputting the test tones.
• For correct speaker settings, do not adjust the volume while outputting the test tones.
• If there is too much ambient noise, error message will be displayed.
In such a case, press the ENTER button to confirm “RETRY?” after checking for ambient noise.
• If there may be a problem with speaker connection, “ERR ~” (error message) will be displayed.
If confirming “RETRY?” with pressing the ENTER button does not fix the problem, turn off the power and check the speaker
connection.
3. To check the speaker configuration, press the CURSOR UP/DOWN buttons to select the speaker.
• Each time the CURSOR UP/DOWN buttons are pressed, the speaker is changed.
• If the speaker configuration is not correct, press the CURSOR LEFT/RIGHT buttons to change the setting. When the
correction is finished, confirm the speaker configuration.
4. To confirm the speaker configuration, press the CURSOR UP/DOWN buttons to select “CHECK OK”, then
press the ENTER button.
• Then the Room EQ setup will start.
• If any operation is not performed while displaying “CHECK OK” for 10 seconds, the Room EQ setup will start automatically.
5. If the Room EQ setup has been completed, it will be returned to the Room EQ setup.
• Then the settings made in the Room EQ setup are memorized. You can check these settings on the “SPEAKER SETUP”
menu. (For details, refer to “SETTING THE SPEAKER SETUP” on page 50.)
49
ENGLISH
SETTING THE ROOM EQ
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 50
Meijer.com
ENGLISH
SETTING THE SPEAkER SETUP
AMP : BACK / R2
• After you have installed this receiver and connected all the components, you should adjust the speaker settings for the
optimum sound acoustic according
your
environment and speaker layout.
TONE :to
OFF
/ ON
TRE : 0 / -10 ~ +10
• Even when you change speakers, speaker positions, or the layout of your listening environment, you should adjust the
PWR-M
:
OFF
/
60
/
30
/
10
/
ON
BASS : 0 / -10 ~ +10
speaker settings, too.
• When performing the Room EQ setup procedure, you need not perform the SPEAKER CONFIGURATION, the CHANNEL
SET RMEQ
LEVEL
and the SPEAKER DISTANCE procedures. (For details, refer to “SETTING THE ROOM EQ” on page 49.)
SPK CFG
F : LARGE / SMALL
C : LARGE / SMALL / NO
S : LARGE / SMALL / NO
SB : LX2 / LX1 / SX2 / SX1 / NO
SW : YES / PLUS / NO
X.OVER
X.OVER : 50 / 80 / 100 / 150 / 200
CH LEVEL
T. TONE : M / A
L : 0 dB / -15 ~ +15
C : 0 dB / -15 ~ +15
R : 0 dB / -15 ~ +15
SR : 0 dB / -15 ~ +15
SBR : 0 dB / -15 ~ +15
SBL : 0 dB / -15 ~ +15
SL : 0 dB / -15 ~ +15
SW : 0 dB / -15 ~ +15
DISTANCE
L : 10.0 FT / 0.1 ~ 30.0
C : 10.0 FT / 0.1 ~ 30.0
R : 10.0 FT / 0.1 ~ 30.0
SR : 10.0 FT / 0.1 ~ 30.0
SBR : 10.0 FT / 0.1 ~ 30.0
SBL : 10.0 FT / 0.1 ~ 30.0
SL : 10.0 FT / 0.1 ~ 30.0
SW : 10.0 FT / 0.1 ~ 30.0
ROOM2 : OFF / ON
MLT ROOM
• SPK CFG (SPEAKER CONFIGURATION) : To adjust the speakers depending on whether they are connected or not.
• X.OVER (CROSSOVER FREQUENCY) : To select theR2
desired
crossover
frequency.
: TUNER
/ CD / AUX
/ F.AUX / VIDEO 1/ V2/IPD
• CH (CHANNEL) LEVEL : To adjust each channel level with the test tone.
• DISTANCE (SPEAKER DISTANCE) : To select the distance
the listening
position and each speaker to set the delay
R2VOLbetween
: 40 / MIN(0)
~ MAX(80)
time automatically for optimum surround playback.
50
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 51
Meijer.com
When selecting the SPEAkER CONFIGURATION
• Then “F ~” will be displayed.
2. Press the CURSOR UP/DOWN buttons to select the desired speaker.
3. Press the CURSOR LEFT/RIGHT buttons to set the selected speaker as desired.
• Depending on your speaker type, you can select one of these following speaker types.
• Front, Center, Surround and Surround Back speakers :
LARGE (or L) : Select this when connecting speakers that can fully reproduce sounds below crossover frequency.
SMALL (or S) : Select this when connecting speakers that can not fully reproduce sounds below crossover frequency.
When this is selected, sounds below crossover frequency are sent to the subwoofer or speakers which are
set to “LARGE” (when not using a subwoofer).
NO : Select this when no speakers are connected. When this is selected, sounds are sent to the speakers which are not set
to “NO”.
( ) : Selectable for Surround Back speakers.
• Surround Back speakers :
x2/x1 : Select the desired depending on the number of speakers connected to SURROUND BACK/ROOM2 terminals.
• SubWoofer :
YES : Select this to output LFE signals and bass frequencies of channels set to “SMALL” from the subwoofer.
PLUS : Select this if you want the subwoofer to output bass sound continuously or you want deeper bass (the bass
frequencies that would normally come out the front and center speakers are also routed to the subwoofer.)
NO : Select this when the subwoofer is not connected. The bass frequencies are output from other speakers.
■Notes :
• When speakers are set to “SMALL”, you should set their crossover frequency correctly according to their frequency
characteristics. (For details, refer to “When selecting the CROSSOVER FREQUENCY” on page 52.)
• When the “F” (Front) is set to “SMALL, “C” (Center), “S” (Surround) and “SB” (Surround Back) cannot be set to “LARGE” and
the “SW” (SubWoofer) cannot be set to “NO”.
• When the “S” (Surround) is set to “SMALL”, the “SB” (Surround Back) cannot be set to “L” (Large).
4. Repeat the above steps 2 and 3 until the speakers are all set to the desired mode.
■About the speaker size
• Select “LARGE” or “SMALL” not according to the actual size of the speaker but according to the speaker’s capacity for playing
low frequency (bass sound below frequency set on the “CROSSOVER FREQUENCY” menu) signals.
• If you do not know, try comparing the sound at both settings (setting the volume to a level low enough so as not to damage the
speakers) to determine the proper setting.
51
ENGLISH
1. Press the CURSOR UP/DOWN buttons to select the “SPK CFG”, then press the ENTER button.
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 52
Meijer.com
When selecting the CROSSOVER FREQUENCY
ENGLISH
1.
Press the CURSOR UP/DOWN buttons to select the “X.OVER”, then press the ENTER button.
• Then “X.OVER ~” will be displayed.
2. Press the CURSOR LEFT/RIGHT buttons to set the crossover frequency as desired.
• You can select the crossover frequency among 50, 80, 100, 150 and 200 Hz.
■About the crossover frequency
• When speakers are set to “SMALL”, low frequencies in those channels that are below the crossover frequency are to output
from subwoofer or front speakers which are set to “LARGE” (when not using a subwoofer).
• Refer to the operating instructions of the speakers to be connected. If the frequency range of your speaker is 100Hz ~ 20kHz,
the crossover frequency should be set to 100 Hz (or slightly higher).
When selecting the CHANNEL LEVEL
1. Press the CURSOR UP/DOWN buttons to select the “CH LEVEL”, then press the ENTER button.
• Then “T.TONE ~” will be displayed.
2. Press the CURSOR LEFT/RIGHT buttons to select the desired mode.
• Each time these buttons are pressed, the mode changes as follows :
M (MANUAL) : To move the test tone manually from speaker to speaker and to adjust the individual channel levels.
↕
A (AUTO) : To adjust the channel levels as the test tone moves from speaker to speaker automatically.
3. Press the ENTER button to confirm your selection.
• After the volume increases to the reference level, test tone will be output.
• When the “A” (AUTO) is selected, the test tone will be output from each speaker for 2 seconds.
4. Press the CURSOR LEFT/RIGHT buttons to adjust the level of each channel.
• When the “M” (MANUAL) is selected, select the speakers to be output the test tone with using the CURSOR UP/DOWN
buttons.
• You can adjust the channel level within the range of -15 ~ +15 dB.
■Note :
• The test tone will not be output from the speakers set to “NO”.
5. To cancel the test tone function, press the RETURN button.
• The previous menu will be returned.
52
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 53
Meijer.com
When selecting the SPEAkER DISTANCE
Press the CURSOR UP/DOWN buttons to select the “DISTANCE”, then press the ENTER button.
• Then “L ~” will be displayed.
2. Press the CURSOR UP/DOWN buttons to select the desired speaker.
■Note :
• You cannot select the speakers set to “NO”.
3. Press the CURSOR LEFT/RIGHT buttons to set the selected speakers as desired.
• You cannot set the distance within the range of 0.1 ~ 30 feet in 0.1 feet intervals.
4. Repeat the above steps 2 and 3 until the distances are all set as desired.
■About the speaker distance
When enjoying multi-channel surround playback with Dolby Digital and DTS sources, etc., it is ideal that the center, surround,
surround back and subwoofer speakers should be the same distance from the main listening position as the front speakers.
By entering the distance between the listening position and each speaker, the delay times of center, surround, surround back
and subwoofer speakers are automatically adjusted to create an ideal listening environment virtually as if the center,
surround, surround back and subwoofer speakers were at their ideal locations respectively.
53
ENGLISH
1.
DISTANCE
L : 10.0 FT / 0.1 ~ 30.0
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 54
C : 10.0 FT / 0.1 ~ 30.0
R : 10.0 FT / 0.1 ~ 30.0
Meijer.com
SR : 10.0 FT / 0.1 ~ 30.0
SBR : 10.0 FT / 0.1 ~ 30.0
SETTING THE MULTI ROOM SETUP
SBL : 10.0 FT / 0.1 ~ 30.0
ENGLISH
SL : 10.0 FT / 0.1 ~ 30.0
• The ROOM2 function allows enjoying one source in the main room and playing another in a different room at the same time.
SW : 10.0 FT / 0.1 ~ 30.0
MLT ROOM
ROOM2 : OFF / ON
R2 : TUNER / CD / AUX / F.AUX / VIDEO 1/ V2/IPD
R2VOL : 40 / MIN(0) ~ MAX(80)
• ROOM2 (ROOM2 mode) : To turn on or off the ROOM2 function.
• R2 (ROOM2 input) : To select the desired ROOM2 source.
• R2VOL (ROOM2 volume) : To adjust the ROOM2 volume.
■Notes :
• To select “MLT ROOM”, set the “AMP” to “R2” first. (For details, refer to “When selecting the AMP ASSIGN” on page 48.)
• Only the analog input signal from the ROOM2 source can be heard. So, be sure to make analog audio connection and select
analog input for ROOM2 source.
1. Press the CURSOR LEFT/RIGHT buttons to set the ROOM2 mode as desired.
• Each time these buttons are pressed, the ROOM2 mode changes as follows :
ON : To turn on the ROOM2 function. (“R2” lights up.)
↕
OFF : To turn it off. (“R2” goes off.)
■Notes :
• When the ROOM2 mode is set to OFF, you cannot select the ROOM2 input and adjust the ROOM2 volume.
• When you do not use the ROOM2 function, turn off the ROOM2 function to save electricity.
■When the ROOM2 mode is set to ON
2. Press the CURSOR UP/DOWN buttons to select the desired item.
3. Press the CURSOR LEFT/RIGHT buttons to set the selected item as desired.
■When selecting the ROOM2 input
• You can select the desired among CD, AUX, F.AUX, TUNER, VIDEO1, V2/IPD.
■Note :
• You cannot select VuNow as a ROOM2 source.
■When selecting the ROOM2 volume
• You can adjust the ROOM2 volume within the range of 0 ~ 80 dB.
54
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 55
Meijer.com
Troubleshooting Guide
PROBLEM
POSSIBLE CAUSE
REMEDY
No power
• The AC input cord is disconnected.
• Poor connection at AC wall outlet or the outlet is
dead or off.
• Connect cord securely.
• Check the outlet using a lamp or another
appliance.
No sound
• The speaker wires are disconnected.
• The master volume is adjusted too low.
• The MUTE button is pressed to ON.
• Incorrect selection of input source.
• Incorrect connections between the components.
• The HDMI Audio Out is set to THRU.
• Check the speaker connections.
• Adjust the master volume.
• Press the MUTE button to cancel the muting effect.
• Select the desired input source correctly.
• Make connections correctly.
• Set it to AMP. (For details, refer to “When
selecting the HDMI (HDMI Audio Out)” on page
25.)
No sound from the surround
speakers
• Surround mode is switched off(stereo mode).
• Master volume and surround level are too low.
• Monaural source is used.
• Surround speaker setting is “NO”.
• Select a surround mode.
• Adjust master volume and surround level.
• Select a stereo or surround source.
• Select the desired surround speaker setting.
No sound from the center
speaker
• Stereo mode, etc is selected.
• Center speaker setting is “NO”.
• Master volume and center level are too low.
• Select the desired surround mode.
• Select the desired center speaker setting.
• Adjust master volume and center level.
No sound from the surround back
speakers
• The input signal format or the current surround
mode cannot support the 7.1(or 6.1) surround.
• Under the proper situations, perform the 7.1(or
6.1) surround playback.(For details, refer to
“ENJOYING SURROUND SOUND” on page 23.)
• Assign the power amplifier to the surround back
channels.(For details, refer to “When selecting
the AMP ASSIGN” on page 48.)
• Adjust master volume and surround back level.
• Select the desired surround back speaker setting.
• The surround back channels' power amplifier is
assigned to “R2”.
• Master volume and surround back level are too low.
• Surround back speaker setting is “NO”.
• Video connections between this unit and the
monitor TV are not made correctly.
• Incorrect selection of input source on the monitor
TV.
• Make proper video connections.
• HDMI connection between this unit and the
monitor TV is not made correctly.
• The monitor TV or other equipments do not
support HDCP.
• Make proper HDMI connection.
Noise or distorted picture
• Video format of your monitor TV, BD/DVD player,
etc. is different from NTSC.
• Change the video format to NTSC.
No picture with home network
connection
• Home network connection between this unit and
broadband router is not correctly.
• The communication setting is not set correctly.
• The settings related to VuNow are not set
correctly.
• Make proper home network connection.
Stations cannot be received
• No antenna is connected.
• The desired station frequency is not tuned in.
• Antenna is in wrong position.
• Connect an antenna.
• Tune in the desired station frequency.
• Move antenna and retry tuning.
Preset stations cannot be
received
• An incorrect station frequency has been memorized.
• The memorized stations are cleared.
• Memorize the correct station frequency.
• Memorize the stations again.
Poor FM reception
• No antenna is connected.
• The antenna is not positioned for the best reception.
• Weak signals.
• Connect an antenna.
• Change the position of the antenna.
• Install an outdoor FM antenna.
Remote control unit does not
operate.
• Batteries are not loaded or exhausted.
• The remote sensor is obstructed.
• Replace the batteries.
• Remove the obstacle.
No picture
No picture with an HDMI
connection
55
• Select the input source correctly.
• This unit will not output video signal unless the
connected equipments supports HDCP.
• Set the setting correctly.
• Set the settings correctly.
ENGLISH
If a fault occurs, run through the table below before taking your receiver for repair.
If the fault persists, attempt to solve it by switching the receiver off and on again. If this fails to resolve the situation, consult your
dealer. Under no circumstances should you attempt to repair the receiver yourself. This could void the warranty.
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 56
Meijer.com
ENGLISH
Specifications
■AMPLIFIER SECTION
• Power output, stereo mode, 6 Ω, THD 0.5%, 1 kHz | 2× 100 W
• Total harmonic distortion at -3 dB, 6 Ω, 1 kHz | 0.5%
• Input sensitivity/impedance
Line (CD, AUX, VIDEO) | 200 mV/47kΩ
• Signal to noise ratio, IHF “A” weighted
Line (CD, AUX, VIDEO) | 100 dB
• Frequency response
Line (CD, AUX, VIDEO), 20 Hz ~ 70 kHz | +0, -3 dB
• Bass/Treble control, 100 Hz/10 kHz | ±10 dB
• Surround mode, only channel driven
Front power output, 6 Ω, 1 kHz, THD 0.7 % | 100 W / 100 W
Center power output, 6 Ω, 1 kHz, THD 0.7 % | 100 W
Surround power output, 6 Ω, 1 kHz, THD 0.7 % | 100 W / 100 W
Surround back / ROOM2 power output, 6 Ω, 1 kHz, THD 0.7 % | 100 W / 100 W
■DIGITAL AUDIO SECTION
• Sampling frequency | 32, 44.1, 48, 96, 192 kHz
• Digital input level
Coaxial, 75 Ω | 0.5 Vp-p
Optical, 660 nm
| -15 ~ -21 dBm
■VIDEO SECTION
• Video format
| NTSC
• Input sensitivity(=Output level), 75 Ω
Video (Composite(normal))
|
Component video (R-Y signal)
(B-Y signal)
(Y signal)
• HDMI connector
| 19 pin
1 Vp-p
| 0.5 Vp-p
| 0.5 Vp-p
| 1.0 Vp-p
■FM TUNER SECTION
• Tuning frequency range
| 87.5~107.9 MHz
• Usable sensitivity, THD 3%, S/N 30 dB
| 9 dBf
• 50 dB quieting sensitivity, mono/stereo
| 20.2 / 45.3 dBf
• Signal to noise ratio, 65 dBf, mono/stereo
| 70 / 65 dB
• Total harmonic distortion, 65 dBf,1 kHz, mono/stereo
| 0.8 / 1.0 %
• Frequency response, 30 Hz~15 kHz
| ±3 dB
• Stereo separation, 1 kHz
| 30 dB
• IF rejection ratio | 70 dB
■GENERAL
• Power supply
| 120 V ~ 60 Hz
• Power consumption
| 120 W
• Dimensions (W× H× D, including protruding parts)
• Weight (Net)
| 4.58 kg (10.1 Ibs)
|
430 x 72 x 306 mm(17 x 2-7/8 x 12 inches)
Note: Design and specifications are subject to change without notice for improvements.
56
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 57
Meijer.com
Setup Code Table
TV
Daewoo
Daytron
Denon
Dumont
Dwin
Electroband
Emerson
Envision
Fisher
Fujitsu
Funai
Futuretech
GE
Gibralter
005
041
014
005
026
024
027
043
027
030
027
003
051
019
027
003
028
027
005
005
010
050
030
012
011
027
027
010
027
007
012
022
030
003
016
002
044
050
019
003
005
019
026
027
027
007
004
002
003
031
047
027
048
014
Goldstar
Gradiente
Grunpy
Hallmark
Harley Davidson
Harman/Kardon
Havard
Hitachi
Infinity
Inteq
JBL
JCB
JVC
KEC
KTV
Kenwood
LG
LXI
Logik
Luxman
MGA
MTC
Magnavox
Majestic
Marantz
Matsushita
Magatron
Memorex
049
034
001
031
011
014
005
006
010
005
032
003
011
019
016
038
006
006
008
011
040
014
014
030
001
041
006
034
035
Midland
Minutz
Mitsubishi
Motorola
Multitech
NAD
NEC
NTC
Nikko
Onwa
Optimus
Optonica
Orion
Panasonic
Penney
003
036
028
026
031
006
026
023
008
015
005
030
038
003
027
024
041
040
029
034
029
025
035
025
Pilco
Philips
57
005
009
027
025
026
010
027
016
010
002
010
050
009
027
027
005
011
007
001
011
017
012
010
001
010
042
025
019
001
007
004
041
041
027
020
005
014
005
027
019
041
028
008
007
004
010
010
025
011
026
003
011
018
011
ENGLISH
AOC
Admiral
Aiko
Akai
Alaron
Ambassador
America Action
Ampro
Anam
Audiovox
Baysonic
Belcor
BenQ
Bell & Howell
Bradford
Brockwood
Broksonic
CXC
Candle
Carnivale
Carver
Celebrity
Cineral
Citizen
Concerto
Contec
Craig
Crosley
Crown
Curtis Mathes
046
005
003
006
010
019
020
005
005
005
025
003
026
003
011
016
042
031
017
025
002
008
006
015
017
025
003
025
003
022
011
025
014
042
021
031
042
020
003
031
022
025
005
011
026
008
011
005
012
006
016
005
015
003
025
040
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 58
ENGLISH
Meijer.com
Pilot
Pioneer
Portland
Prism
Proscan
Proton
Pulsar
Quasar
RCA
Radio Shack
Realistic
Runco
SSS
Sampo
Samsung
Samsux
Sansei
Sansui
Sanyo
Scimitsu
Scotch
Scott
Sears
Semivox
Semp
Sharp
Sherwood
Shogun
Signature
Sony
Soundesign
Squareview
Starlite
Supreme
Sylvania
Symphonic
TMK
Tandy
Technics
Technoi Ace
Techwood
Teknika
Telefunken
Toshiba
Totevision
Vector Research
Victor
Vidikron
005
022
003
008
007
025
002
008
007
037
007
003
019
011
002
027
005
012
006
030
031
019
003
025
028
007
011
027
020
041
000
003
001
050
027
023
027
050
010
023
025
041
008
026
008
010
011
011
019
006
005
009
010
003
006
006
014
032
003
042
008
038
019
011
021
006
005
003
006
005
Vidtech
Wards
White Westinghouse
Yamaha
Zenith
021
041
039
021
006
027
003
040
027
013
015
005
025
005
025
003
003
011
027
010
023
025
019
003
020
026
025
021
001
006
002
052
025
Admiral
Adventura
Aiko
Aiwa
Akai
America Action
America High
Asha
Audiovox
Beaumark
Bell & Howell
Brocksonic
Broksonic
CCE
Calix
Canon
Carver
Cineral
Citizen
Colt
Craig
Curtis Mathes
Cybernex
Daewoo
Denon
Dynatech
Electrohome
Electrophonic
Emerex
Emerson
045
026
026
005
011
024
Fisher
Fuji
Funai
GE
Garrard
GoldStar
Gradiente
HI-Q
Harley Davidson
Harman/Kardon
Harwood
042
011
027
001
017
006
020
012
012
014
003
003
021
011
034
003
031
005
001
035
025
004
001
014
021
001
023
026
015
028
024
020
025
017
003
000
018
009
004
027
023
003
DOCK-VCR
033
025
025
010
026
031
005
002
026
58
027
050
025
005
026
025
004
023
005
023
017
021
020
015
005
004
016
025
005
015
005
013
023
010
008
034
005
005
002
005
001
012
004
034
013
034
005
034
012
034
016
015
021
034
018
025
025
012
004
025
006
006
021
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 59
Meijer.com
Minolta
Mitsubishi
Motorola
Multitech
NEC
Nikko
Noblex
Olympus
Opimus
Orion
Panasonic
Penny
Pentax
Philco
Philips
Pilot
Pioneer
Profitronic
Proscan
Protec
Pulsar
Quarter
Quartz
Quasar
RCA
Radio Shack
Radix
Randex
011
034
014
026
005
015
014
004
005
034
015
004
023
023
023
025
004
023
004
005
004
004
017
008
027
004
034
017
005
023
004
005
031
020
004
004
008
004
004
005
014
023
013
015
007
011
011
004
013
034
005
005
Realistic
008
026
026
Runco
STS
Samsung
Sanky
Sansui
Sanyo
Scott
Sears
025
026
005
006
Semp
Sharp
Sherwood
Shintom
Shogun
Singer
Sony
Syvania
Symphonic
TMK
Tatung
Teac
Technics
Teknika
Thomas
Toshiba
Totevision
Unitech
Vector
Vector Research
Video Concepts
Videosonic
Wards
009
034
007
016
034
019
016
028
005
021
029
027
011
014
016
015
014
009
026
006
027
032
021
028
005
017
028
029
001
022
023
029
008
031
006
007
031
012
032
023
030
White WestingHouse
XR-100
Yamaha
Zenith
021
016
004
011
007
008
023
027
034
012
020
004
011
010
027
000
015
023
015
004
004
034
023
026
034
004
004
034
010
005
023
010
006
010
023
013
034
005
027
012
034
010
007
014
023
010
005
033
021
017
018
012
026
011
009
034
024
002
016
034
034
003
009
026
028
005
034
004
008
027
015
021
004
006
007
025
034
015
034
021
017
ENGLISH
Headquarter
Hitachi
JVC
Jensen
KEC
KLH
Kenwood
Kodak
LXI
Lloyd’s
Logik
MEI
MGA
MGN Technology
MTC
Magnasonic
Magnavox
Magnin
Marantz
Marta
Matsushita
Memorex
008
017
016
023
009
023
012
019
003
DOCK - TV/VCR
028
004
029
027
031
023
008
Ameira High
Brocksonic
Colt
Cutis Mathes
Daewoo
Emerson
Funai
GE
019
59
004 (TV use 008)
001
015
004 (TV use 008)
025
001
034
004 (TV use 008) 013 (TV use 007)
027 (TV use 041) 023
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 60
ENGLISH
Meijer.com
Hitachi
HQ
Lloyds
MGA
Megavox
Magnin
Memorex
Mitsubishi
Orion
Panasonic
Penney
Quasar
RCA
Sansui
Sanyo
Sear
Sharp
Sony
Symphonic
Zenith
004 (TV use 008) 034
034
034
023
016 (TV use 010) 004 (TV use 008)
034
023
005 028 (TV use 042)
027 (TV use 041)
001
004 (TV use 008) 028 (TV use 042)
004 (TV use 008) 023
028 (TV use 042)
004 (TV use 008) 028 (TV use 042)
013 (TV use 007) 004 (TV use 008)
027 (TV use 041)
034
023
034 005
027 (TV use 041)
002 (TV use 050)
034
034
CBL
015
Chinese Manufacturer
025
009
008
005
024
027
024
013
024
003
002
002
017
001
018
004
013
014
024
013
024
Harman/Kardon
JVC
Kenwood
Megavox
Mitsubishi
Onkyo
Panasonic
Philips
Pioneer
Proscan
RCA
Samsung
Sherwood
Sony
Technics
Theta Digital
Toshiba
Yamaha
Zenith
006
014
023
019
011
021
000
022
003
021
026
General Instrument
033
017
026
012
006
010
002
006
015
015
011
031
016
018
017
022
031
010
022
012
001
006
017
003
000
010
006
014
031
002
010
010
014
007
Movie Time
NSC
Oak
Optimus
Panasonic
Philips
Pioneer
Popular Mechanics
RCA
Radio Shack
Recoton
Regal
Regency
Rembrandt
Samsung
Scientific Atlanta
Sherwood
Signal
Signature
SL Marx
Sprucer
Starcom
Stargate
Starquest
Teleview
Tocom
026
012
020
002
018
018
009
018
018
014
011
001
026
010
022
018
010
084
GoldStar
Goodmind
Hamlin
Hitachi
Jasco
Jerrold
BD/DVD
Apex
ABC
Allegro
Archer
Bell&Howell
Century
Citizen
Comtronics
Contec
Eastern
Emerson
Everquest
Focus
Garrard
Gemini
General Electric
016
007
010
60
009
030
032
014
006
034
020
004
013
018
007
034
021
033
032
026
028
030
027
006
008
009
010
021
014
031
025
021
020
014
023
014
010
014
008
026
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 61
Meijer.com
010
015
018
018
015
024
022
AUX-LD
Denon
Mitsubishi
NAD
Pioneer
Sony
019
SAT
AlphaStar
Chaparral
Echostar
Expreevu
General Instrument
Hitachi
HTS
Hughes Net.Sys
JVC
Jerrold
Megavox
Memorex
Next Level
Panasonic
Philips
Primestar
Radio Shack
RCA
Realistic
Sherwood
Sony
Star Choice
Toshiba
Uniden
Zenith
008
001
009
009
016
011
009
007
009
016
006
006
018
017
006
016
018
003
014
000
004
018
010
006
013
015
Aiwa
Carver
Harman/Kardon
JVC
Kenwood
Megavox
Marantz
Onkyo
Opimus
Panasonic
Pioneer
Sansui
Sony
Technics
Victor
Wards
Yamaha
018
015
005
005
015
002
012
004
004
016
022
008
004
004
012
002
038
002
004
021
038
024
002
010
034
004
024
025
020
019
011
014
026
009
AUX-CD AMP
005
Aiwa
Carver
Curtis Mathes
Denon
Harman/Kardon
Linn
Megavox
Marantz
Panasonic
Philips
Pioneer
Sony
Technics
Wards
Yamaha
014
035 (for Mini Disc)
AUX-USB
Sherwood
018
AUX-TAPE
AUX-MD
Sherwood
007
007
007
007
017
ENGLISH
Tusa
TV86
Unika
Universal
Viewstar
Zenith
Zentek
000
61
030
023
027
037
040
023
023
023
039
023
003
019
039
003
028
040
027
033
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 62
Meijer.com
ENGLISH
AUX-HOME AUTOMATION
GE
Lutron
One For All
Radio Shack
Security System
Universal X10
X10
Linn
MCS
MTC
Megavox
Marantz
Mission
NSM
Nikko
Onkyo
Opimus
043
044
042
043
042
042
042
AUX-DBS
Aiwa
Fisher
Harman/Kardon
JBL
JVC
Jerrold
RCA
Scientific Artlanta
Sony
Starcom
045
005
046
046
047
031
006
032
045
031
Panasonic
Parasound
Philips
Pioneer
Proton
QED
Quasar
RCA
Realistic
Rotel
SAE
Sansui
Sanyo
Scott
Sears
Sharp
Sherwood
029
AUX-VIDEO ACCESSORY
Archer
GC Electronics
Jebsee
Rabbit
Radio Shack
Telecaption
013
013
013
036
013
015
Sony
Soundesign
Tascam
Teac
Technics
Victor
Wards
Yamaha
Yorx
CD
Aiwa
Burmester
California Audio Lab
Carver
DKK
Denon
Emerson
Fisher
Garrard
Genexxa
Harman/Kardon
Hitachi
JVC
Kenwood
Krell
LXI
010
019
002
010
001
028
035
012
019
004
010
004
007
003
010
035
030
012
020
034
033
018
035
011
029
016
024
025
62
010
002
019
010
002
010
010
033
008
001
019
002
019
010
004
010
010
002
012
012
010
010
010
012
035
035
029
013
000
001
009
019
019
002
007
010
005
032
035
010
026
004
009
031
023
035
035
019
019
013
012
021
035
020
021
017
006
013
036
029
035
013
027
037
038
014
022
018
031
033
006
015
039
013
040
041
cover_904N:cover_904N 2009-10-15 오
11:53 페이지 2
Meijer.com
R-904N
NetBoxx
5707-00000-279-0S