advertisement
• FAST SHIPPING AND
DELIVERY
• TENS OF THOUSANDS OF
IN-STOCK ITEMS
• EQUIPMENT DEMOS
• HUNDREDS OF
MANUFACTURERS
SUPPORTED
• LEASING/MONTHLY
RENTALS
• ITAR CERTIFIED
SECURE ASSET SOLUTIONS
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment
SERVICE CENTER REPAIRS
Experienced engineers and technicians on staff at our full-service, in-house repair center
Instra
View
SM REMOTE INSPECTION
Remotely inspect equipment before purchasing with our interactive website at www.instraview.com
WE BUY USED EQUIPMENT
Sell your excess, underutilized, and idle used equipment
We also offer credit for buy-backs and trade-ins www.artisantg.com/WeBuyEquipment
LOOKING FOR MORE INFORMATION?
Visit us on the web at www.artisantg.com
for more information on price quotations, drivers, technical specifications, manuals, and documentation
Contact us: (888) 88-SOURCE | [email protected] | www.artisantg.com
Versatile, Automatic
RCL Meters
Technical Specifications
PM 6306 / PM 6304 / PM 6303A
PM 6306 and PM 6304
Versatile component measurement and testing
•
Easy to use, at-a-glance display
•
Test frequencies, from 50 Hz to 1 MHz (100 kHz for PM 6304)
•
0.1 % basic accuracy (0.05 % for PM 6304C)
•
RS-232 and IEEE-488 interfaces
•
AC test levels from 50 mVrms to 2 Vrms
•
Internal or external bias
•
DC test measurement (optional)
•
9 front panel set-ups
•
Actual component test voltage/current readback
•
Automatic zero trimming
•
Contact check and deviation mode (PM 6306 only)
•
Front-panel test posts for immediate 4-wire measurements
PM 6303A
Effective, economic testing that’s quick and easy to use
•
Easy-to-use, at-a-glance display of relevant information
•
0.25 % basic accuracy
•
2V DC internal bias
•
Automatic zero trimming
•
Front-panel test posts for immediate 4-wire measurements
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
®
AC Test mode
Test frequency
Test frequency accuracy
Test signal levels
Basic measurement accuracy at normal measurement mode
DC bias
Internal
External
DC Test mode (Optional)
Test signal levels
Basic measurement accuracy at normal measurement mode
Contact check (PM 6306 only)
Pass
Fail
Maximum measuring ranges
Impedance / Resistance AC
Resistance DC
Capacitance
Inductance
Quality factor
Dissipation factor
Phase angle
Voltage monitor
Current monitor
Z or R
AC
R
DC
C
L
Q
D
φ
V
X
I
X
Maximum resolution
Impedance / Resistance AC
Resistance DC
Capacitance
Inductance
Quality factor
Dissipation factor
Phase angle
Voltage monitor
Current monitor
Z or R
R
DC
C
L
Q
D
φ
V
X
I
X
AC
Circuit diagram
Display
Auto mode
Read-out
Equivalent circ uit diagram
Manual mode
Read-out
Equivalent circuit diagram
Average function
Function
Levels
Deviation mode (PM 6306 only)
Relative range in respect
Measuring modes
Normal
Continious
Single
Test frequency
Read-out
Fast
Max. speed
Test frequency
Single
Read-out
PM 6306
50, 60, 100, 120 Hz
200 Hz to 100 kHz (100 Hz steps)
100 kHz to 1 MHz (1 kHz steps)
0.01%
50 mV to 2V (10 mV steps) via 100
Ω
0.1% ± 1 digit
(for
≥
0.25V,
≤
50 kHz)
0.1% * (f / 50 kHz) ± 1 digit
(for
≥
0.25V, > 50 kHz)
0.1% * (0.25V/V
T
) ± 1 digit
(for < 0.25 V,
≤
50 kHz)
0 to 10V (0.1V steps)
0 to 40V
PM 6304
50, 60, 100, 120 Hz
200 Hz to 20 kHz (100 Hz steps)
100 kHz
0.01%
50 mV via 100
Ω
1V via 100
Ω
2V via 400
Ω
0.05% ± 1 digit
(for PM 6304C,
≤
2 kHz)
0.1% ± 1 digit (for
≤
20 kHz)
0.4% ± 1 digit (100 kHz)
0.5% ± 1 digit (for 50 mV,
≤
20 kHz)
2.0% ± 1 digit (for 50 mV, 100 kHz)
50 mV to 2 V (10 mV steps) via 100
Ω
0.1% ± 1 digit
(for
≥
0.25V)
< 3
Ω
≥
3
Ω
(with indication of failed connection lead
2V
0 to 40V
300 mV via 100
Ω
1 V via 100
Ω
2 V via 400
Ω
0.1% ± 1 digit (for 1V)
-
0.0000
Ω to 200 M
Ω
0.0000
Ω to 50 M
Ω
0.00 pF to 31.8F
0.00 µH to 637 kH
0.000 to 1000
0.000 to 1000
-179 to +180 deg
0.1 µV to 2.00V
0.005 µA to 10.0 mA
0.1 m
Ω
0.1 m
Ω
0.01 pF
0.01 µH
0.001
0.001
0.1 deg
0.1 µV
0.001 µA
1 of 7 different equivalent circuit diagrams
Dominant and secondary parameter
Parallel for R+C, Serial for R+L
Dominant and secondary parameter or Z,
φ
, D, Q, V
X
Parallel or serial selectable
, I
X
3 (and off)
-100% to +100%
Exponential averaging in continious mode
1 (and off)
-
2 measurements/s
Triggered via ”TRIG” key,
Triggered via handler interface
Triggered via IEEE-488 or RS-232
50, 60, 100, 120 Hz
200 Hz to 100 kHz (100 Hz steps)
100 kHz to 1 MHz (1 kHz steps)
DC (optional)
50, 60, 100, 120 Hz
200 Hz to 20 kHz (100 Hz steps)
100 kHz
DC (optional)
Display or via IEEE-488 or RS-232 interface
10 measurements/s
200 Hz to 100 kHz (200 Hz steps) 200 Hz to 20 kHz (200 Hz steps)
100 kHz to 1 MHz (1 kHz steps)
DC (optional)
100 kHz
DC (optional)
Triggered via handler interface
Triggered via IEEE-488 or RS-232
Via IEEE or RS-232 interface (display blanked)
Options for PM 6306 and PM 6304
PM 9548
Control capability
Interface functions
Address range
Remote lock-out
Special functions
Signals
PM 9549
Mode
Control capability
Baud rates
Data bits
Stop bits
Parity
Xon/Xoff handshake
Hardware handshake
Signals
Connector
IEEE-488 interface
All functions
AH1, L3, RL1, SR1, SH1,
T6
1...30
Go to local by front panel key ”LOCAL”
Learn mode / device identification mode
All optically isolated
RS-232 interface
Communication mode
Printing mode
All functions
110, 150, 300, 600,
1200, 2400, 4800,
9600, 19200
7 or 8
1 (2 for 110 baud only)
Odd, Even, None
On or Off
DSR/DTR and CTS/RTS
All optically isolated
9-pin D-connector, male
PM 9565 DC test measurement option
Technical specification See ”DC test mode”
PM 9566
Signals
Inputs
Outputs
Handler interface
All optically isolated
Trigger input
Bin 0-9 indication
FAIL indication
Max. switchable current 200 mA
Max. switchable voltage 40V
®
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Binning
Standard bins
Special bins
Bin programming via
PM 6306 PM 6304
9
Bin ”0” and bin ”fail”
IEEE-488 interface
RS-232 interface
Bin programmer (PM 6304 only)
Absolute or relative Bin limit programming
Trim function
Open circuit
Short circuit
Protection against charged capacitors
C < 2 µF
2 µF
≤
C
≤
2 mF
C > 2 mF
Stored settings
(non-volatile memory)
Front panel settings
Bin settings
Print measurement results
Calibration
Calibration interval
Environmental conditions
Operating temperature
Storage temperature
Power requirements
Line frequency
Power consumption
EMC
Safety
Open circuit compensation Z > 100 k
Ω
Short circuit compensation Z < 10
Ω
V max.
V max.
< 200 V
< 47 x (C/mF)
(V max.
V max.
in V, C in mF)
< 40V
-0.234
V max.
V max.
< 500 V
< 117 x (C/mF)
(V max.
V max.
in V, C in mF)
< 100V
-0.234
9+1 (trim figures included)
9+1
Via RS-232 interface for serial printers
1 year
0°C to 50°C
-40°C to 70°C
100/120/220/240 V ± 10%
50/60 Hz
31 VA 44 VA
According to CE regulation 89/336: Emission according to EN 55011
Group 1 Class B, respectively CISPR 11. Immunity according to EN 50082-1, inclusive IEC 801-2,-3,-4
According to CE-regulation 73/23 EN61010-1 CAT II, Pollution Degree 2,
CSA C22.2 No. 231
30 minutes 5 minutes Warm-up time
Dimensions and weight
WxHxD
Weight 5.3 kg / 11.7 lb
315 x 105 x 405 mm (12.4” x 4.13” x 15.9”)
4.7 kg / 10.4 lb
Accessories for PM 6306, PM 6304 and PM 6303A
PM 9540 / BAN
DUT connection
Cable length
Weight
PM 9540 / TWE
DUT connection
DUT length
Cable length
Weight
PM 9541A
DUT connection
Cable length
Weight
PM 9541B
DUT connection
Cable length
Weight
PM 9542A
DUT connection
DUT length
Dimensions (WxHxD)
Weight
PM 9542 / SMD
DUT connection
DUT length
DUT width
DUT height
Dimensions (WxHxD)
PM 9559
Distance
PM 9564
Height
4-wire test cable set with Banana plugs
4 Banana plugs
1000 mm
0.15 kg
SMD tweezers
2 tweezers max. 20 mm
1000 mm
0.15 kg
4-wire test cable set with Kelvin clips
2 Kelvin clips
1000 mm
0.2 kg
4-wire test cable set with heavy Kelvin clips
2 Kelvin clips
1000 mm
0.3 kg
Universal test adapter
Kelvin contacts in test posts
1000 mm
145 x 50 x 95 mm (5.7” x 1.9” x 3.7”)
0.6 kg
Test fixture for SMDs
(in combination with PM 9542A)
Kelvin contacts in test posts min. 2 mm, max. 10 mm min. 1 mm min. 0.5 mm
55 x 45 x 30 mm (2.2” x 1.8” x 1.2”)
Infrared bin programmer (PM 6304 only)
< 1.5m
Rack mount kit
2E (88.5 mm)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
PM 6303A
AC test mode
Test frequency 1 kHz
Test frequency accuracy
Test signal level
0.025%
2V via 400
Ω source
Basic measurement accuracy 0.25% ± 1 digit
DC bias
Internal 2V
Maximum measuring ranges
Impedance / Resistance Z or R
AC
Capacitance C
Inductance
Quality factor
Dissipation factor
Phase angle
L
Q
D
φ
0.000
Ω to 200 M
Ω
0.0 pF to 100 mF
0.0 µH to 32 kH
0.002 to 500
0.002 to 500
-90.0 to +90.0 deg
Maximum resolution
Impedance / Resistance Z or R
AC
Capacitance C
Inductance
Quality factor
Dissipationfactor
Phase angle
L
Q
D
φ
0.1 m
Ω
0.1 pF
0.1 µH
0.001
0.001
0.1 deg
Circuit diagram
7 different equivalent circuit diagrams
Auto mode
Read-out
Equivalent circuit diagram
Dominant parameter
Parallel for R+C
Serial for R+L
Manual mode
Read-out
Equivalent circuit diagram
Dominant or secondary parameter
Parallel or serial selectable
Measurement update rate
2 measurements/s
Trim function
Open circuit
Short circuit
Open circuit compensation
Z > 100 k
Ω
Short circuit compensation
Z < 10
Ω
Stored settings (non-volatile memory)
Front panel settings 1 (trim figures included)
Calibration
Calibration interval 1 year
Environmental conditions
Operating temparature 0°C to 50°C
Storage temparature -40°C to 70°C
Power requirements 100/120/220/240V
Line frequency
± 10%
50 to 100 Hz
Power consumption 16 VA
EMC According to CE regulation
89/336: Emission ccording
Safety
Warm-up time to EN 55011 Group 1 Class
B, respectively CISPR 11.
Immunity according to
EN 50082-1, inclusive IEC
801-2,-3,-4
According to CEregulation 73/23
EN61010-1 CAT II,
Pollution Degree 2
5 minutes
Dimensions and weight
WxHxD 315 x 105 x 405 mm
Weight
(12.4” x 4.13” x 15.9”)
3.8 kg / 8.4 lb
®
Accessories PM 6306, PM 6304 and PM 6303A
PM 9540 / BAN 4-wire test cable set with Banana plugs
Optimum calibrator contact or connections to other instruments or accessories is ensured by the PM 9540 / BAN test cable set.
PM 9540 / TWE SMD tweezers
The PM 9540 / TWE SMD tweezers make picking up, testing and general handling of small components fast, convenient and accurate.
They allow 4-wire measurements up to the tweezer tips. With the PM
9540 / TWE, all that is required is to simply grasp the component with the tweezers and read-out the measured valuw on the RCL meter.
Nothing could be faster or more convenient.
Options PM 6306 and PM 6304
PM 9541A 4-wire test cable set with Kelvin clips
This test cable set combines convenient connection to larger components and assemblies with the accuracy of 4-wire testing.
PM 9548 IEEE-488 interface
With this IEEE-488 interface, the PM 6306 or PM
6304 RCL meter can be used as part of a fully automated component test environment for applications at up to 10 measurements/s.
PM 9541B 4-wire test cable set with heavy Kelvin clips
This test cable set combines convenient connection to larger components and assemblies with the accuracy of 4-wire testing.
PM 9549 RS-232 interface
The RS-232 interface allows the PM 6304 or PM
6306 to be connected directly to a PC, for automated operation including selection of test set-ups and downloading measurement data. The RS-232 interface can also be connected to a serial printer for printing the test results.
PM 9542A Universal test adapter
The PM 9542A adapter allows easy 4-wire testing of components, which can be inserted direcly into the Kelvin contacts of the test posts.
In combination with the 9542 / SMD the testing of miniature SMDs is also covered.
PM 9559 Infrared bin programmer (PM 6304 only)
The infrared bin programmer is a compact handheld unit programs the
PM 6304’s component sorting function.
PM 9565 DC test measurement
The DC test measurements add test capabilities to the standard AC measurements, like comparison of
AC and DC behavior.
PM 9564 Rack mount kit
The PM 6306, PM 6304 and PM 6303A RCL meters can be built into a system rack by using the PM 9564 Rack mount kit.
PM 9566 Handler interface
The handler interface allows component sorting to be automated by providing output signals to control placement of tested components into up to 11 bins according to the measured value.
®
Windows ® Test Software PM 6306 and PM 6304
The SW63W ComponentView PC software adds extra versatility to automated testing. This Windows® software package provides powerful functions for the analysis of test results downloaded via the
RS-232 or IEEE interface. It also allows all functions of the RCL meter and bus parameters to be controlled remotely from the PC. Test results can be stored on disk, printeed-out in report form or exported to spreadsheet programs. An additional powerful function is the scan mode. This mode allows components or devices under test to be measured automatically at different frequencies or voltages.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Ordering information
PM 6306 models
Type number
PM 6306/02n
PM 6306/03n
PM 6306/06n
PM 6306/07n
PM 6306/52n
PM 6306/53n
PM 6306/56n
PM 6306/57n
IEEE-488 interface
•
•
•
•
RS-232 interface
•
•
•
•
PM 6304 models
Type number
PM 6304/00n
PM 6304/02n
PM 6304/03n
PM 6304/04n
PM 6304/06n
PM 6304/07n
PM 6304/50n
PM 6304/52n
PM 6304/53n
PM 6304/54n
PM 6304/56n
PM 6304/57n
IEEE-488 interface
•
•
•
•
RS-232 interface
•
•
•
•
DC test Handler interface
•
•
•
•
•
•
•
•
DC test Handler interface
•
•
•
•
•
•
•
•
•
•
•
•
PM 6303A models
PM 6303A/00n Automatic RCL meter
Power options
The last digit of the type number is the indication for the local line voltage and local line cord. Following line voltage settings plus line cords are available.
n = 1 Universal European 220V n = 3 Standard North American 120V n = 4 United Kingdom 240V n = 5 Switzerland 220V n = 8 Australia 240V
Example: PM 6304/573
Programmable RCL meter PM 6304 with "handler interface", "DC measurement unit" and "RS 232 interface" installed, Standard North American line cable.
Options for PM 6306 and PM 6304
(retrofittable, service center installable)
PM 9548
PM 9549
IEEE-488 interface kit
RS-232 interface kit
PM 9565
PM 9566
Remark:
DC measurement option kit
Handler interface
PM 6306 is equiped with either an IEEE-488 or RS-232 interface (see models).
Accessories PM 6306, PM 6304 and PM 6303A
PM 9540/BAN 4-wire test cable set with Banana plugs
PM 9540/TWE SMD Tweezers
PM 9541A 4-wire test cable set with Kelvin clips
PM 9541B
PM 9542A
PM 9542SMD
PM 9564
4-wire test cable set with heavy Kelvin clips
Universal test adapter
Test fixture for SMDs (in combination with PM 9542A)
Rack mount kit
Windows® Test Software PM 6306 and PM 6304
SW63W ComponentView test software (for instruments with interface)
Y8021
Y8022
PM 9536/041
Shielded IEEE-488 Cable, 1m
Shielded IEEE-488 Cable, 2m
RS-232 cable 3 m, 9 pin female / 9 pin female
Fluke Corporation
P.O. Box 9090, Everett, WA 98206
Fluke Europe B.V.
P.O. Box 1186,
5602 BD Eindhoven,
The Netherlands
For more information call:
In the U.S.A.: (800) 443-5853 or Fax: (425) 356-5116
In Europe/M-East:
+31 (0)40 2 678 200 or Fax: +31 (0)40 2 678 222
In Canada: (905) 890-7600 or Fax: (905) 890-6866
From other countries:
+1(425) 356-5500 or Fax: +1 (425) 356-5116
Web access: http://www.fluke.com
©Copyright 1998 Fluke Corporation.
All rights reserved.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
®
• FAST SHIPPING AND
DELIVERY
• TENS OF THOUSANDS OF
IN-STOCK ITEMS
• EQUIPMENT DEMOS
• HUNDREDS OF
MANUFACTURERS
SUPPORTED
• LEASING/MONTHLY
RENTALS
• ITAR CERTIFIED
SECURE ASSET SOLUTIONS
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment
SERVICE CENTER REPAIRS
Experienced engineers and technicians on staff at our full-service, in-house repair center
Instra
View
SM REMOTE INSPECTION
Remotely inspect equipment before purchasing with our interactive website at www.instraview.com
WE BUY USED EQUIPMENT
Sell your excess, underutilized, and idle used equipment
We also offer credit for buy-backs and trade-ins www.artisantg.com/WeBuyEquipment
LOOKING FOR MORE INFORMATION?
Visit us on the web at www.artisantg.com
for more information on price quotations, drivers, technical specifications, manuals, and documentation
Contact us: (888) 88-SOURCE | [email protected] | www.artisantg.com
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement