Brocade Communications Systems AM866A - StorageWorks 8/8 Base SAN Switch QuickSpecs

QuickSpecs
HP StorageWorks P2000 G3 FC Modular Smart
Array System
Overview
The HP StorageWorks P2000 G3 FC Modular Smart Array (P2000 G3 FC) is the newest Fibre Channel model of Hewlett
Packard's 2000 family of storage arrays (which include the MSA2000i G2 iSCSI and the MSA2000sa G2 SAS connected
models), specifically designed for entry-level customers and features the very latest in functionality and 8Gb technology at
highly affordable price points. These storage solutions offer excellent price/performance and availability features for direct
attach configurations (depending on OS), clusters, workgroups and entry-level SAN environments. Each solution is designed
to be easy to deploy, to be secure, along with low management costs, while driving rapid return on investment.
The P2000 G3 FC is an 8 Gb Fibre Channel connected 2U storage area network (SAN) or direct connect solution (OS
dependent) designed for small to medium size departments or remote locations. It offers a choice of two controllers. The first
is a high-performance, Fibre Channel 8 Gb dual port model. The second is a unique dual-purpose Combo controller with two
8 Gb Fibre Channel ports with the addition of two 1GbE iSCSI ports. A P2000 G3 FC Array can have one or two of the same
controller. Access to the enclosures and drives is at the new faster speed of 6Gb SAS.
The optional dual-protocol P2000 G3 MSA FC/iSCSI Combo Controller gives exceptional flexibility. The 8 Gb FC ports
support a full FC SAN while the two 1GbE iSCSI ports can serve two purposes.
economically share the array storage resource with a smaller department accessing it through iSCSI
enable the new optional Remote Snap functionality over iSCSI protocol
The controller-less chassis is offered in two models - one comes standard with twelve Large Form Factor (LFF) 3.5-inch
drive bays, the other can accommodate twenty-four Small Form Factor (SFF) 2.5-inch drives. Both are able to
simultaneously support enterprise-class SAS drives and archival-class SATA Midline drives. The SFF chassis also supports
SAS Midline drives. Either chassis can have one or two P2000 G3 FC or FC/iSCSI Combo controllers.
HP's modular approach to the entry level enables incremental customer purchases, allowing the array to grow as needs
grow thus allowing a maximum return on investment. Choose a single controller unit for low initial cost with the ability to
upgrade later; or decide on a model with dual controllers for the most demanding entry-level situations. There are no
additional charges, licenses or fees as you add enclosures or hosts and users.
Capacity can easily be added as the need develops by attaching additional drive enclosures. Maximum capacity ranges with
LFF drives up to 57.6 TB SAS or 192 TB SATA with the addition of the maximum number of drive enclosures. Configurations
utilizing the SFF drive chassis and the maximum number of drive enclosures can grow to 44.7 TB of SAS or 74.5 TB of SAS
Midline or SATA Midline with a total of 149 SFF drives. The P2000 G3 FC has been fully tested up to 64 hosts.
Significant data protection advances are delivered only by the new P2000 G3 arrays. First, the units come STANDARD with
sixty-four snapshot capability at no extra cost. There is also now a new option of five hundred and twelve snaps. In a further
move to protect the user's data, optional Remote Snap capability is offered for the first time.
What's New on the Fibre Channel G3
Two new 8Gb controllers: a single-protocol model with two 8Gb FC host ports and a dual-protocol Combo model with
two 8Gb FC host ports and two1GbE iSCSI ports each
6Gb SAS "backend" supporting the P2000 LFF and the D2700 SFF 6Gb disk enclosures
Added scalability to 96 LFF drives or 149 SFF drives
64 Snapshots come standard on all G3 models. Maximum 512 Snapshots with optional software license.
Optional controller-based Remote Snap allows remote replication between two P2000 G3 models over iSCSI (with the
Combo Controller) or over Fibre Channel.
Embedded SMI-S and drive spin-down capability
DA - 13551 Worldwide QuickSpecs — Version 1 — 2.16.2010
Page 1
QuickSpecs
HP StorageWorks P2000 G3 FC Modular Smart Array
System
Overview
HP StorageWorks P2000 G3 FC SFF Modular Smart Array
HP StorageWorks P2000 G3 FC LFF Modular Smart Array
1. Power supplies
2. Fibre Channel ports
3. CLI port (mini-USB)
4. Reserved for future use
5. Management Ethernet port
6. Expansion port
1.
2.
3.
4.
5. Reserved for future use
6. Management Ethernet port
7. Expansion port
Power supplies
Fibre Channel ports
iSCSI ports
CLI port (mini-USB)
DA - 13551 Worldwide QuickSpecs — Version 1 — 2.16.2010
Page 2
QuickSpecs
HP StorageWorks P2000 G3 FC Modular Smart Array
System
Overview
Models
StorageWorks
P2000 G3 FC
Modular Smart Array
P2000 G3 FC Controllers & Controller-less Chassis
HP StorageWorks P2000 G3 FC Modular Smart Array Controller
(two 8Gb FC ports)
HP StorageWorks P2000 G3 FC/iSCSI Combo Modular Smart Array Controller
(two 8Gb FC ports and two 1GbE iSCSI ports)
HP StorageWorks P2000 Modular Smart Array 3.5-in Drive Bay Chassis (LFF)
(Will accept one or two controllers or Disk Enclosure I/O modules)
HP StorageWorks P2000 Modular Smart Array 2.5-in Drive Bay Chassis (SFF)
(Will accept one or two controllers, not I/O modules)
Disk Enclosures
HP StorageWorks P2000 Dual I/O LFF Drive Enclosure, twelve 3.5" drive bays
(w/ two.5m mini-SAS to mini-SAS cables. Used with single or dual controller LFF
or SFF array head)
HP StorageWorks P2000 LFF Drive Enclosure I/O Module (no cable included.
Designed for use with blank LFF chassis AP838A)
HP StorageWorks D2700 SFF Disk Enclosure, twenty-five 2.5" drive bays
(w/ two .5m mini-SAS to mini-SAS cables. Used with single or dual controller
LFF or SFF array head)
Configured Units
HP StorageWorks P2000 G3 MSA FC Dual Controller LFF Modular Smart Array
System
HP StorageWorks P2000 G3 MSA FC Dual Controller SFF Modular Smart Array
System
HP StorageWorks P2000 G3 MSA FC/iSCSI Dual Combo Controller LFF Array
HP StorageWorks P2000 G3 MSA FC/iSCSI Dual Combo Controller SFF Array
Controller-less Chassis: DC-powered units
HP StorageWorks P2000 DC-power LFF Chassis
(can add one or two P2000 G3 FC controllers or P2000 JBOD I/O modules)
HP StorageWorks P2000 DC-power SFF Chassis
(can add one or two P2000 G3 FC controllers. No P2000 JBOD I/O module
support)
Related Option: MSA2000fc G2 controller (Previous generation)
HP StorageWorks 2300fc G2 Modular Smart Array Controller (limited use)
(for use only by those needing to configure an older MSA2000fc G2 array. Only
supports G2 features, functionalities. Maximum 99 SFF or 60 LFF drives, 256
snaps, no Remote Snap)
DA - 13551 Worldwide QuickSpecs — Version 1 — 2.16.2010
AP836A
AP837A
AP838A
AP839A
AP843A
AJ844A
AJ941A
AP845A
AP846A
AW567A
AW568A
AP840A
AP841A
AJ798A
Page 3
QuickSpecs
HP StorageWorks P2000 G3 FC Modular Smart Array
System
Features and Benefits
Key Hardware Features
Highly efficient consolidation and sharing of storage geared to departmental and small to medium business
requirements
Cost efficient plus high-availability choices
Choice of controllers: two port 8Gb Fibre Channel or a Combo controller with two 8Gb FC ports and two 1GbE iSCSI
ports
Flexibility in drives: LFF P2000 LFF 3.5-inch or HP ProLiant SFF 2.5-inch drives
Enterprise-class SAS, SAS Midline, and archival-class SATA Midline drives as the need and budget dictates
Dual-ported SAS drives for enterprise needs
Large capacity SATA drives for inexpensive archival storage
Able to mix SAS and SATA drives within the same drive enclosure
Supports mixing LFF and SFF JBODs behind the same array. Limited by 8 enclosures total (max: 7 LFF or 5 SFF, 96
LFF drives, 149 SFF drives. No combination producing more than149 drive maximum.
Choose either single or dual controller array models to fit the budget
Customer Benefits
The HP StorageWorks 2000 Modular Smart Array family (P2000 G3, MSA2000 G2) manages growing storage
requirements across multiple HP ProLiant and Integrity servers for customers who need a centralized dedicated
storage solution for applications (check model for specific server support). SANs allow for controlled, cost-effective
growth and increased protection of data.
Its ease of management allows a department or small company to effectively handle growing storage requirements
with a minimum of complexity.
The HP StorageWorks P2000 G3 FC/iSCSI Combo Modular Smart Array Controller offers both FC and iSCSI
functionalities built into a single array controller thus allowing customers to get both performance storage thru FC and
extend their SAN investment with low-cost iSCSI. It also offers remote replication feature for data protection.
Depending on the model chosen, the modular design allows the user to start relatively small but supports future
growth to hundreds of users and up to 57.6 TB SAS or 192 TB SATA (LFF drives) with the addition of the maximum
number of P2000 LFF drive enclosures (7). Choosing SFF drives, the array can grow up to 44.7 TB SAS or 74.5 TB of
SAS MDL or SATA MDL with the maximum number of D2700 SFF enclosures (5).
The P2000 G3 FC array comes standard with 64 controller-based snapshots and clone capability, allowing the smaller
departmental user or company to implement functionality once only available to much larger firms with expensive
arrays. The P2000 G3 FC also supports an optional 512 snaps.
Also available is the optional controller-based Remote Snap capability (available only with the new P2000 G3 models),
allowing the entry-level array user the ability to replicate their data to another P2000 G3 array, be it across campus or
across the net. This can be accomplished over FC or iSCSI.
Unequalled flexibility: upgradable by design. Owners of the original MSA2000 array or the second generation
MSA2000 G2 series are able to do data-in-place controller upgrades to the P2000 G3 FC. Cross protocol upgrades
are also supported between the FC, the SAS, and the iSCSI controllers. This unique ability protects the earlier
investments in chassis, drives, and JBODs. Refer to
DA - 13551 Worldwide QuickSpecs — Version 1 — 2.16.2010
Page 4
QuickSpecs
HP StorageWorks P2000 G3 FC Modular Smart Array
System
Features and Benefits
HP P2000 G3 FC Models At a Glance:
High performance Modular Smart Array controllers, either with two 8Gb Fibre Channel ports or the Combo controller
with 8Gb Fibre Channel and 1GbE iSCSI ports
Single or dual controller capability to fit initial budget constraints
2 GB transportable read/write cache per controller - battery-free cache backup with super capacitors and compact
flash
512 LUNs with LUN size up to 16TB
2U rack mount chassis combining both the controller and disk shelf
Twelve 3.5-inch or twenty-four 2.5-inch dual-ported SAS or SATA drive bays (supports mixing of drive types in a
single shelf)
Supports expansion to seven additional LFF enclosures for a total of 96 LFF disks
Supports expansion to five additional SFF enclosures (D2700) for a maximum total of 149 SFF disks
Redundant power supplies and fans are standard
RAID levels 0, 1, 3, 5, 6, 10, 50
Non-disruptive on-line controller code upgrade (requires dual controllers w/ multi-pathing software)
FC ports have heterogeneous support for 32-bit and 64-bit Windows, Red Hat and SuSE Linux, and HP-UX.
OpenVMS on Integrity
Windows Server 2008 x64 Hyper-V, VMware, and Red Hat Enterprise Linux Virtualization
Qualified and certified for Windows, Linux, and HP-UX (and OpenVMS) clustering
Controller-based 64 snapshot, and clone capability standard. 512 Snap and Remote Snap functionality optional.
DA - 13551 Worldwide QuickSpecs — Version 1 — 2.16.2010
Page 5
QuickSpecs
HP StorageWorks P2000 G3 FC Modular Smart Array
System
Family Information
Capacity
Minimum / with
maximum additional
drive enclosures
P2000 G3 FC
MSA2000i G2
MSA2000sa G2
LFF: 7.2 TB SAS
or 24 TB SATA
w/ 7 LFF enclosures:
57.6 TB SAS
or 192 TB SATA
SFF: 7.2 TB SAS
or 12 TB SATA
w/ 5 D2700 JBODs:
44.7 TB SAS
or 74.5 TB SATA
2 GB per controller
512
LFF: 5.4 TB SAS
or 12 TB SATA
w/ 4 drive enclosures:
21.6 TB SAS
or 48 TB SATA
SFF: 7.2 TB SAS
or 6 TB SATA
w/ 3 MSA70 JBODs:
29.7 TB SAS
or 24.7 TB SATA
1 GB per controller
511
LFF: 5.4 TB SAS
or 12 TB SATA
w/ 4 drive enclosures
21.6 TB SAS
or 48 TB SATA
SFF: 7.2 TB SAS
or 6 TB SATA
w/ 3 MSA70 JBODs:
29.7 TB SAS
or 24.7 TB SATA
1 GB per controller
512
Two 1 GbE
iSCSI ports
per controller
Four 3 Gb
SAS ports
per controller
Two 4 Gb
Fibre Channel ports
per controller
(Ten w/switch)
60 LFF/99 SFF
60 LFF/99 SFF
96
32
64**
512
Snapshot (max 255)
clone
Snapshot (max 255)
clone
Snapshot,
clone,
remote data replication
Primary Storage
with SAS.
Secondary with SATA
Primary Storage
with SAS.
Secondary with SATA
Primary Storage
with FC
Secondary with FATA
Controller Cache
Total LUNs
(w/ dual controller)
Host connect
Two 8Gb
P2000 & MSA2000 have Fibre Channel ports or
1 or 2 controllers, EVA
Two 8Gb FC and two
has 2 controllers
1GbE iSCSI ports
standard
per controller
Maximum Drives
96 LFF/149 SFF
w/ expansion
Maximum host
64
supported
Optional software:
Snapshot, 64 standard
Snapshot, clone,
(max 512)
Remote Snap
Clone (standard)
Remote Snap
Use for Storage
Primary Storage
with SAS.
Secondary with SATA
Comparison w/
EVA4400
LFF: 5.4 TB FC
or 12 TB FATA
w/ 8 drive enclosures
43 TB FC
or 96 TB FATA
(LFF only)
2 GB per controller
1024
NOTE: maximum available storage capacity depends on the RAID level being implemented, and is based on maximum
number of LUNs and LUN size.
** Supports up to 8 hosts with SAS direct connect and 64 hosts (BladeSystem servers) using 3Gb SAS BL switch
Product Technology
8Gb Fibre Channel
technology
Two host ports per controller, shipped with SFPs. the P2000 G3 FC
controller can run in either point-to-point or FCAL (loop). The default is
FCAL which is used in Direct Connect, particularly with two controllers.
The PtP (fabric) mode is used with almost all switches.
Combo controller with Product Features
FC and iSCSI ports
This ingenious dual-protocol "combo" controller supports a full FC SAN
through the 8Gb FC ports, while designating the two 1GbE iSCSI ports to
enable remote replication over iSCSI protocol or perform as an iSCSI
target. This allows economical sharing of the storage resource (the P2000
G3 array) with one department needing the performance afforded by the
8Gb FC ports while simultaneously supporting another department with
lesser performance needs and a budget only allowing an iSCSI network.
Modular Chassis
2U rack height. 12 Large Form Factor or 24 Small Form Factor drive
bays, accommodating SAS and SATA. Comes with space for one or two
controllers, or P2000 3.5-inch disk Enclosure I/O modules (LFF chassis
only)
Drives available
The new P2000 G3 FC controller supports both the P2000 3.5-inch Large
Form Factor (LFF) drives, and the HP ProLiant 2.5-inch Small Form
DA - 13551 Worldwide QuickSpecs — Version 1 — 2.16.2010
Page 6
QuickSpecs
HP StorageWorks P2000 G3 FC Modular Smart Array
System
Family Information
Factor (SFF) drives.
Serial Attached SCSI (SAS) enterprise-class drives are designed
for high demand, 24x7 usage.
SAS Midline and SATA Midline are usually reserved for archival of
data as they are both relatively inexpensive and are available in
very large capacities.
The HP entry-level family of arrays can accommodate both SAS and
SATA drives within the same enclosure making it ideal to have both
business-critical, high activity files on SAS drives while using Snapshot,
clone, or Remote Snap capability to keep back-up or archival data on the
less expensive drives.
For investment protection, the controllers will support single port SAS &
SATA drives in a legacy single-domain MSA70. This support allows
current owners of MSA70s to migrate their single port drives (in their
MSA70 only, not into the array head) to be attached to a P2000 G3 FC or
an MSA2000fc G2. They can only cascade to another single I/O MSA70.
This is not a data-in-place transition, and overall performance could be
impacted.
SAS drive performance can be approximately 30% greater than SATA
performance on sequential host I/O. SAS performance excels in
sequential lower latency response time and random I/O per second
transaction performance due to higher rpm disk speeds yielding lower
seek times. SAS drive random performance is generally twice that of
SATA drives.
Optional Disk
enclosures
NOTE: P2000 and MSA2 3.5-inch Large Form Factor (LFF) drives are for
use only in the P2000 G3 or MSA2000 models. The 2.5-inch Small Form
Factor (SFF) drives are supported only with the P2000 G3 or the
MSA2300fc G2 controller and are common with and are the same part
numbers as the ProLiant hot-plug 2.5-inch drives.
Just as the user has a choice of chassis for the array head (LFF and SFF
drive bays, AC or DC powered), so also do they have a choice of
expansion disk enclosures accommodating either drive size.
(NOTE: these are not supported as part of a NEBS-certified with the MSA
Carrier Grade Chassis.)
P2000 3.5-inch drive enclosure. This 2U unit has twelve LFF (3.5-inch)
drive bays and accepts for P2000 dual-ported SAS and SATA drives. The
pre-configured HP StorageWorks P2000 Dual I/O LFF Drive Enclosure
(AP843A) has two I/O modules and supports both single and dual
controller arrays. If a single I/O disk enclosure model is desired, the
appropriate chassis should be purchased along with a single I/O module
(AP844A).
This 3.5-inch drive enclosure can be attached to either the P2000
G3 FC LFF or SFF array head.
Each configured model ships standard with two .5m mini-SAS to
mini-SAS cables for cascading to other P2000 drive enclosures
Up to seven P2000 3.5-inch enclosures can be attached to a P2000
G3 FC or FC/iSCSI Combo controller in the array head.
D2700 2.5-inch drive enclosure. This 2U storage enclosure (AJ941A) is
designed to support twenty five ProLiant 2.5-inch Universal form factor
(SFF) 6Gb SAS or SATA hard drives. It ships standard with dual I/O
modules installed.
DA - 13551 Worldwide QuickSpecs — Version 1 — 2.16.2010
Page 7
QuickSpecs
HP StorageWorks P2000 G3 FC Modular Smart Array
System
Family Information
Scalability
LUNs
RAID 0, 1, 3, 5, 6, 10,
50
Performance
This 2.5-inch drive enclosure can be attached to a P2000 G3
controller (SFF or LFF) array head
The D2700 enclosure ships with a two .5m miniSAS to miniSAS
cable.
Up to five D2700 may be attached to the P2000 G3 array head,
given total support for 149 SFF drives.
The P2000 G3 FC controller is designed to allow an installation to begin
with smaller capacity and be able to grow gradually as needed. The
flexibility of SAS or SATA drive technology, form factors, sizes, speeds,
and costs per GB allows a system to easily fit in almost any budget.
Large Form Factor configurations can scale up to 7.2 TB SAS or 24
TB SATA, expandable to 57.6 TB SAS or 192 TB SATA with the
addition of a maximum of seven P2000 3.5-inch Drive Enclosures.
Small Form Factor configurations can scale from 7.2 TB SAS or 12
TB SATA. With the addition of five D2700 JBODs, the P2000 G3
FC can support 44.7 TB SAS or 74.5 TB SATA.
Users may configure a 24-drive P2000 G3 FC SFF array head with
12-drive LFF P20000 3.5-inch disk enclosures. This is an excellent
method for a configuration that support fast SFF enterprise-class
SAS drives in the array head, combined with economical LFF drives
staged for archival purposes, all in the same array.
Qualification of larger capacity drives is ongoing.
The MSA2000 family of arrays supports 512 LUNs (total volumes in a
dual controller system) and LUN sizes up to 16 TB. The array supports
expansion and deletion of any LUN.
In addition to the usual RAID levels, the P2000 G3 features several
important additional levels. RAID 6 is the highest level of RAID protection.
It allocates two sets of parity data across drives and allows simultaneous
write operations. It can withstand two simultaneous drive failures without
downtime or data loss. RAID 10 is mirroring and striping without parity. It
is the most popular of the multiple RAID levels, allowing large arrays with
high performance in most cases and superior fault tolerance. RAID 50
combines the block striping and parity of RAID 5 with the straight block
striping of RAID 0, yielding higher performance than RAID 5 through the
addition of RAID 0, particularly during writes.
Performance numbers are a guideline as established by tests using RAW
I/O in an Operating System Agnostic test lab environment. A total of 144
GB 15K SAS drives were used in a dual controller configuration of 12
vdisks consisting of twelve disks per vdisk, 1.6 TB volumes, and 3
volumes per host. 4 hosts directly attached to the P2000 G3 FC were
used in this test configuration (results cannot be expected with a single
host). Results were achieved in Sequential Writes with 256K blocks; all
random tests were based on 8K block sizes.
NOTE: Number and type of applications, drive type and number of drives,
operating system used, and the number of hosts will affect overall
performance. This table is provided strictly as a test-lab comparison. The
test results shown for the P2000 G3 are preliminary and designed to give
a reference point for comparisons. They will be reposted as necessary.
DA - 13551 Worldwide QuickSpecs — Version 1 — 2.16.2010
Page 8
QuickSpecs
HP StorageWorks P2000 G3 FC Modular Smart Array
System
Family Information
P2000 G3 FC
MSA2000sa
(estimated,
MSA2000i G2
G2
not final)
Protocol (host connect)
8 Gb Fibre
3 Gb SAS 1GbE Ethernet
Channel
MSA2000 RAID 10 Performance Results
Sequential Reads MB/s
1,551
1,050
274
Sequential Writes MB/s
778
532
266
Random Mix IOPs 60/40
18,192
17,700
13,493
read/write
MSA2000 RAID 5 Performance Results
Sequential Reads MB/s
1,552
1,050
274
Sequential Writes MB/s
914
617
266
Random Mix IOPs 60/40
11,361
4,926
5,325
read/write
MSA2000 RAID 6 Performance Results
Sequential Reads MB/s
1,551
1,050
274
Sequential Writes MB/s
893
729
266
Random Mix IOPs 60/40
6,815
3,865
3,851
read/write
Refer to P2000 G3/MSA2000 Best Practices White Paper for
configuration guidance to obtain the best overall performance. Best
Practices Guide available at: www.hp.com/go/P2000
MSA2 G2 Performance
DC-power chassis
Configuration and
Management Tools
P2000 Software and
Documents
Support CD
Hot Plug Expansion
and Replacement
Support
HP is making the two models of controller-less chassis available with
direct current (DC) power supplies. They each have the two empty bays
where users can insert one or two P2000 G3 FC controller(s). In addition,
the P2000 chassis with LFF drive bay can have P2000 3.5-inch I/O
modules inserted to create a LFF DC-power JBOD.
The 500 watt power supply is designed to operate over the input range of
-40VDC to -75VDC.
HP StorageWorks P2000 DC-power LFF twelve 3.5AP840A
in Drive Bays
(supports up to 2 controllers or I/O modules)
HP StorageWorks P2000 DC-power SFF twenty-four
AP841A
2.5-in Drive Bays
(supports up to 2 controllers, not I/O modules)
HP StorageWorks Storage Management Utility (SMU). Management
access, out-of-band: WEB GUI, CLI. Interface Types: USB, 10/100
Ethernet. Protocols Supported SNMP, SMI-S, SSL, SSH, SMTP, FTP,
HTTP, Telnet
All product documentation (CD can be used on ALL supported
server Operating Systems.)
MSA Device Discovery Tool (Win and Linux) - reports P2000/MSA
HW devices, and supported storage software
Host Software Bundles (Win and Linux for both ProLiant x86,
ProLiant x64 and Integrity IA64servers)
CD updated quarterly on HP.com with sustaining firmware updates
All P2000 G3 models support hot plug expansion and replacement of
redundant controllers, enclosures, fans, power supplies, and I/O modules
for simple, fast installation and maintenance.
DA - 13551 Worldwide QuickSpecs — Version 1 — 2.16.2010
Page 9
QuickSpecs
HP StorageWorks P2000 G3 FC Modular Smart Array
System
Family Information
Snapshot and Clone
Overview
Server Compatibility
Arrays come standard with 64 snaps, 512 snaps available. Controller
based functionality. Offers higher levels of data protection, enabling an
almost instant recovery from data failure or corruption. Offers alternative
development testing of 'offline' production data and the ability to backup
snapped/cloned data.
The P2000 G3 FC comes integrated with web browser based software for storage and RAID
management, setup, configuration, and troubleshooting. This reduces the cost of ownership by
reducing the training and technical expertise necessary to install and maintain your HP storage
solution.
The SPOCK database provides interoperability information for thousands of components and
millions of component combinations. It is available to all users on the HP.com website.
http://www.hp.com/storage/spock
Supports most HP ProLiant, BladeSystems and Integrity servers including
HP ProLiant DL, ML
HP c-Class Blade Servers
Integrity servers, IA64
Industry Standard X86
Supports most multi-vendor industry standard 32-bit Intel and AMD based (x86) servers. HP
servers support
requires the Third-Party Server to be logo'd and listed on the Microsoft Windows Server
Catalog.
Refer to the Microsoft website: http://www.microsoft.com/windows/catalog/server/
HP StorageWorks Division recommends that the Third-Party Server Vendor is an active
member of TSANet. Refer to the TSANet website for details: www.tsanet.com
Non-HP servers will generally be supported if the HP storage stack is used. This includes
supported HP branded HBAs and drivers, and supported FC switches.
OS Support (x86)
Refer to the HP support statements for complete current OS version support:
http://www.hp.com/storage/spock
OS Support
(Integrity)
Web Browser support
Microsoft Windows Server 2008 IA32, x64, IA64 (Standard, Enterprise, Datacenter)
Microsoft Windows 2003 and 2003 R2 IA32, x64, IA64
Red Hat Linux (32/64)
SuSE SLES (32/64)
Microsoft Windows Server 2008 x64 Hyper-V
VMware
Citrix XenServer HP Enterprise Edition
Red Hat Virtualization
HP-UX
Windows
Linux
OpenVMS
The P2000 G3 and the older MSA2000 support target based management, and include a
Web interface and a telnet interface, and require a web browser for management.
The P2000 G3 FC requires Microsoft Internet Explorer V7.x and V8.x
The MSA2000 and the MSA2000 G2 require Microsoft Internet Explorer V6.X and V7.X
(strongly encouraged)
Mozilla Firefox 1.0.7 or later is supported
DA - 13551 Worldwide QuickSpecs — Version 1 — 2.16.2010
Page 10
QuickSpecs
HP StorageWorks P2000 G3 FC Modular Smart Array
System
Optional Software
Snapshot and Volume Product Features
Copy Software for the Data Protection
P2000 G3 FC
Snapshots create up to 512 point-in-time pictures of data (512 snaps are exclusive to the
P2000 G3)
Volume Copies create up to 128 point-in-time copies of data
Recovery is instant - revert data from any previous Snapshot or Volume Copy
Backup 'snapped' data to disk, virtual tape, or physical tape without a backup window
A 64 snapshot license and Volume Copy are included with all P2000 G3 FC models.
If support and updates are desired for bundled software functionalities (such as 64
LTU Snap and/or Volume Copy etc in the P2000 G3 products) a combination HW +
SW support care pack must be purchased.
HP does not provide warranty assistance for software products included with our base
hardware products. This would either be SupportPlus or SupportPlus24. The
hardware warranty component of these services is accounted for in the pricing of the
SP and SP24 care packs.
Data Testing
Snap or clone data to test the performance of a software application on 'offline' production
data
Snap or clone data to test how a software patch or enhancement will function on 'offline;
production dat0061
P2000 G3 FC Snapshot and Clone:
G3 controllers/models come STANDARD with 64 snapshots and Volume Copy software
512 Snapshot option is ONLY available and supported with the G3, not older generation MSA2000
models
HP P2000 Snapshot 512 Software LTU
TA806A
HP P2000 Snapshot 512 Software E-LTU
TA806AAE
MSA2000 and MSA2000 G2 Snapshot and Clone software:
Snapshot and Volume Copy software is optional on models other than the P2000 G3 FC.
The following skus are designated for use by the older models of MSA. They are neither
necessary nor available for the P2000 G3 FC.
HP StorageWorks 2000 Modular Smart Array Snapshot 255 Software LTU1
HP StorageWorks 2000 Modular Smart Array Snapshot 64 Software LTU
HP StorageWorks 2000 Modular Smart Array Snapshot 8 Software LTU
HP StorageWorks 2000 Modular Smart Array Snapshot 8/255 Upgrade Software
LTU1
HP StorageWorks 2000 Modular Smart Array Snapshot 64/255 Upgrade
Software LTU1
HP StorageWorks 2000 Modular Smart Array Snapshot 8 to 64 Upgrade
Software LTU
HP StorageWorks 2000 Modular Smart Array Volume Copy Software LTU
1 The snapshot software is supported on G2 and G3 models only. 512 snaps
only applies to G3 controllers.
HP StorageWorks
P2000 Remote Snap
Software
T5539A
T5512A
T5513A
T5540A
T5541A
T5515A
T5514A
HP StorageWorks P2000 Remote Snap Software is an array based software that provides
remote replication on the HP StorageWorks P2000 G3 MSA Array product family. HP
Remote Snap is a form of asynchronous replication which consists of replication of blocklevel data from a volume on a local system to a volume that may be on the same system or
on a second independent system. This second system may be collocated with the first
system or may be located at a remote site.
DA - 13551 Worldwide QuickSpecs — Version 1 — 2.16.2010
Page 11
QuickSpecs
HP StorageWorks P2000 G3 FC Modular Smart Array
System
Optional Software
HP Remote Snap functionality is based on existing Snapshot technology offered by HP
MSA2000 SAN Array products. Snapshots are used to track the data to be replicated as
well as to determine the differences in data updated on the master volume, minimizing the
amount of data to be transferred.
HP Remote Snap replication technology provides the ability to accomplish key data
management and protection capabilities. First, because Remote Snap uses snapshots as
the underlying technology it creates multiple local recovery points which can be used for
such tasks as to complement daily backups; second, replication provides the ability to
access data in a remote site which could be used for dispersed operations; and third but
definitely not least important replication allows for business continuance in the event of a
failure on the primary site.
In order to perform a replication, a snapshot of the volume to be replicated is taken, creating
a point-in-time image of the data. This point-in-time image is then replicated to the
destination volume by copying the data represented by the snapshot via a transport medium
such as TCP/IP (iSCSI) or Fibre Channel. The amount of data transferred is minimized
though the use of snapshots whenever possible.
HP StorageWorks P2000 Array System Remote Snap Software LTU
TA808A
HP StorageWorks P2000 Array System Remote Snap Software E-LTU
TA808AAE
Product Features
Storage based asynchronous snapshot replication
Initial copy of data can be performed locally, reducing burden on wide area networks
Support of both Ethernet and Fiber Channel interconnects provides flexible options to the
application environments.
Snapshot based replication technology means only changed data will be replicated to
alternate site
Advanced scheduler provides several options to IT administrators for business continuance
Flexible architecture allows remote replication between P2000 G3 arrays. Protects existing
investments and enhances business continuity planning objectives by allowing replication
among the full P2000 G3 family.
Replication Wizard simplifies the task of setting up and establishing replication pairs from
one unified, easy to use GUI.
Snapshot based replication enables both local and remote recovery depending on the need.
Snapshot replication isolates problems to a specific point in time which can be selected by
the administrator. Additionally snapshot replication supports longer distance replication.
Multiple relationships provide greater storage flexibility and utilization.
Bundled 64 Snapshots and Volume Copy integration provides better efficiencies by
combining the management and array technologies to create local copies.
Fast application recovery with minimal or no transaction loss
Creation of disaster tolerant copies of your critical business data
No-single-point-of-failure solution to increase the availability of your customers data
DA - 13551 Worldwide QuickSpecs — Version 1 — 2.16.2010
Page 12
QuickSpecs
HP StorageWorks P2000 G3 FC Modular Smart Array
System
Optional Software
Customer Benefits
Disaster Recovery
Replication technology has typically been used to address disaster recovery issues. Disaster
recovery is still the driving business case behind replication. Remote replication can be
implemented from the production site to one or more remote sites across a campus, across town,
across a state or across the country. When a disaster strikes the primary location, the applications
can be brought up at the remote site and continue processing against the replicated copies. When
the primary site is back online, the replication can be reversed and when the data is
resynchronized, processing can be switched back to the primary site and business can continue.
In the past, if an e-mail system experienced a disaster it was an "oh well" moment. The loss of a
day or more of e-mail was not considered important. Today, e-mail is a critical component of many
companies' business plans and recovering e-mail after a disaster quickly and completely is
required.
Maintenance
HP Remote Snap software can also be used to solve other business needs. For instance, E-mail
servers may need periodic maintenance that can take hours to complete. With remote replication
in place, the downtime can be minimal (as long as it takes to bring the remote peer of the primary
e-mail server online). The primary server can be worked on (patches, hardware upgrades, etc.)
and then brought back online and into production. A whole datacenter can be failed over to a
remote site on purpose to perform maintenance on generators, air conditioning, etc. Replication
can also be used to perform a datacenter move with minimal downtime (fail everything to the DR
site, move the production datacenter to its new location then fail the DR site back to the new
datacenter).
Storage Based
Data replication is performed at the storage subsystem controller level and is totally transparent to
the host, alleviating unnecessary host cycles to perform the data mirroring functions. Unlike a
fabric based or host based solution, the storage based solution dedicates its resources to
managing the replication process between arrays, with minimal impact to applications, other data
or devices on the SAN.
Bi-Directional
DA - 13551 Worldwide QuickSpecs — Version 1 — 2.16.2010
Page 13
QuickSpecs
HP StorageWorks P2000 G3 FC Modular Smart Array
System
Optional Software
The bidirectional HP P2000 Array solution addresses the growing need among businesses to
ensure continuous availability of applications that are critical to daily business operations. HP
StorageWorks P2000 enables two sites in a remote replication connection to use each other as a
destination to maintain replicated copies of online data. This maximizes resource utilization while
enabling business continuance, even in the event of disaster.
Disaster Tolerance
The P2000 G3 family utilized snapshot data online and in real time to a remote P2000 G3 through
a local or extended storage area network (SAN). Additionally, data replication can be bidirectional,
meaning that a storage array can be both a source and a destination. A particular LUN can be
replicated in only one direction between the two storage arrays. Write I/O data sent to the source
is replicated by HP P2000 Array to the destination. A properly configured, HP P2000 G3 array is a
replication solution that guarantees data integrity in the event of a storage system or site failure.
Normalization (first initial copy)
When a DR site is initially created a normalization or initial copy of the data from the source
volume to the target volume must occur. The P2000 G3 array allows this first copy to take place
locally. After completion the disks can me manually moved to the remote location. Subsequent
changes will only remotely copy the changed blocks.
SAN Extensions
HP P2000 G3 Array provides the capability to replicate data over direct Fibre Channel. The
distances supported over dark fiber are determined by the speed of the dark fiber connection and
the technology used to communicate over the dark fiber.
HP StorageWorks
Storage Mirroring
Natural and man-made disasters can occur when you least expect it - serving as a reminder that
in less than a moment's notice, volumes of data loss can occur. To prevent data loss from failure,
error, or disaster, HP StorageWorks Storage Mirroring Software provides replication and recovery
of valuable Windows and Linux data to another server. Proactive replication is a key strategy
coupled with tape backup and snapshot technology for up-to-the-second data protection. Having
replicated data co-located enables customers to recover their static and transactional data in
seconds to minutes.
Patented replication and failover technology continuously captures byte-level data changes as
they occur in your production environment and replicates those changes to one or more servers in
any location without geographic limitations. By replicating only the bytes that change, Storage
Mirroring Software uses the absolute minimum bandwidth required to replicate customer data. The
software does not require special hardware to run and utilizes existing LAN or WAN infrastructure
-saving time, additional investment, and maintenance. Storage Mirroring software is storage
independent and will support any DAS, NAS, and SAN storage device. Additional flexibility is
achieved with Windows and Linux operating system support. Storage Mirroring works on Windows
Server 2003, Windows Server 2008, Windows Storage Server, 64-bit Windows, Windows on
Itanium and Red Hat Linux. The platform flexibility, resource optimization, and application-specific
protection enable customers to solidify their data and disaster protection strategies.
For more information visit:
http://h18006.www1.hp.com/products/storage/software/sm/index.html
Storage Mirroring will now be offered in 3 different product SKU families
Stock LTU (channel stocked license(s))
E-LTU (electronic delivery - order any number of licenses - 10 or higher)
LTU (paper delivery which replaces all previous 10 pack licenses -an alternative to
electronic delivery)
Stock LTU Base Models
DA - 13551 Worldwide QuickSpecs — Version 1 — 2.16.2010
Page 14
QuickSpecs
HP StorageWorks P2000 G3 FC Modular Smart Array
System
Optional Software
Order the Stock LTU from an HP authorized reseller. Delivery will consist of a paper entitlement
certificate per SKU and a single activation code. Add a corresponding Storage Mirroring Care
Pack for support.
HP StorageWorks Storage Mirroring Windows Media Kit
TA778A
HP StorageWorks Storage Mirroring Data Migration LTU
TA779A
HP StorageWorks Storage Mirroring Replicate Edition LTU
TA781A
HP StorageWorks Storage Mirroring Replicate Target Edition LTU
TA783A
HP StorageWorks Storage Mirroring Replicate Target Exchange LTU
TA785A
HP StorageWorks Storage Mirroring Recover Entry Edition LTU
TA787A
HP StorageWorks Storage Mirroring Recover Standard Edition LTU
TA789A
HP StorageWorks Storage Mirroring Recover Enterprise Edition LTU
TA791A
HP StorageWorks Storage Mirroring Recover Premium Edition LTU
TA793A
HP StorageWorks Storage Mirroring Recover Virtual Host 1 LTU
TA795A
HP StorageWorks Storage Mirroring Recover Virtual Host 10 LTU
TA797A
HP StorageWorks Storage Mirroring Recover Virtual Host Unlimited LTU
TA799A
E-LTU Base Models
Order E-LTU when you require 10 or more licenses and you desire electronic delivery of those
10+ licenses. E-LTUs replace the previous 10 packs. Previously, an odd number of licenses over
10 require 10 packs and multiple singles, now E-LTUs will deliver the exact number of licenses
electronically. Add corresponding Storage Mirroring Care Packs for support.
NOTE: Electronic software is now available in most countries. HP recommends purchasing
electronic products over physical products when available for faster delivery and the convenience
of not having to manage-either file away or throw away-confidential paper licenses. For more
information, please contact an HP representative.
HP StorageWorks Storage Mirroring Data Migration E-LTU
TA779AAE
NOTE: Electronic software is available in all countries except China and Japan.
China and Japan customers should order the physical equivalent.
HP StorageWorks Storage Mirroring Replicate Edition E-LTU
TA781AAE
NOTE: Electronic software is available in all countries except China and Japan.
China and Japan customers should order the physical equivalent.
HP StorageWorks Storage Mirroring Replicate Target Edition E-LTU
TA783AAE
NOTE: Electronic software is available in all countries except China and Japan.
China and Japan customers should order the physical equivalent.
HP StorageWorks Storage Mirroring Replicate Target Exchange E-LTU
TA785AAE
NOTE: Electronic software is available in all countries except China and Japan.
China and Japan customers should order the physical equivalent.
HP StorageWorks Storage Mirroring Recover Entry Edition E-LTU
TA787AAE
NOTE: Electronic software is available in all countries except China and Japan.
China and Japan customers should order the physical equivalent.
HP StorageWorks Storage Mirroring Recover Standard Edition E-LTU
TA789AAE
NOTE: Electronic software is available in all countries except China and Japan.
China and Japan customers should order the physical equivalent.
HP StorageWorks Storage Mirroring Recover Enterprise Edition E-LTU
TA791AAE
NOTE: Electronic software is available in all countries except China and Japan.
China and Japan customers should order the physical equivalent.
HP StorageWorks Storage Mirroring Recover Premium Edition E-LTU
TA793AAE
NOTE: Electronic software is available in all countries except China and Japan.
China and Japan customers should order the physical equivalent.
LTU Base Models
DA - 13551 Worldwide QuickSpecs — Version 1 — 2.16.2010
Page 15
QuickSpecs
HP StorageWorks P2000 G3 FC Modular Smart Array
System
Optional Software
Order LTUs when you require 10 or more licenses and you desire paper delivery of those 10+
licenses. LTUs replace the previous 10 packs. Previously, an odd number of licenses over 10
require 10 packs and multiple singles, now LTUs will deliver the exact number of licenses via
regular mail Add corresponding Storage Mirroring Care Packs for support.
HP StorageWorks Storage Mirroring Data Migration Stock LTU
TA780A
HP StorageWorks Storage Mirroring Replicate Edition Stock LTU
TA782A
HP StorageWorks Storage Mirroring Replicate Target Edition Stock LTU
TA784A
HP StorageWorks Storage Mirroring Replicate Target Exchange Stock LTU
TA786A
HP StorageWorks Storage Mirroring Recover Entry Edition Stock LTU
TA788A
HP StorageWorks Storage Mirroring Recover Standard Edition Stock LTU
TA790A
HP StorageWorks Storage Mirroring Recover Enterprise Edition Stock LTU
TA792A
HP StorageWorks Storage Mirroring Recover Premium Edition Stock LTU
TA794A
HP StorageWorks Storage Mirroring Recover Virtual Host 1 Stock LTU
TA796A
HP StorageWorks Storage Mirroring Recover Virtual Host 10 Stock LTU
TA798A
HP StorageWorks Storage Mirroring Recover Virtual Host Unlimited Stock LTU
TA800A
NOTE: For more information visit:
http://h18006.www1.hp.com/products/storage/software/sm/index.html
Path failover (MPIO)
MPIO Basic Failover for Windows provides a single multi-path solution for HP StorageWorks
MSA2000fc Modular Smart Array on HP ProLiant servers by providing basic path failover.
Supports Windows 2003, Windows 2003 R2, and Windows 2003 X64 operating systems.
HP MPIO Full Featured DSM for MSA2000fc v2.6.0.5
Microsoft Windows 2008: Microsoft MPIO is bundled with Windows Server 2008 and must
be installed as an operating system feature.
Failover support for Linux is with Device Mapper 4.0 or higher. HP-UX PV-Links
HP-UX: native multipathing for HP-UX v3; PV-Links for HP-UX v2
DA - 13551 Worldwide QuickSpecs — Version 1 — 2.16.2010
Page 16
QuickSpecs
HP StorageWorks P2000 G3 FC Modular Smart Array
System
Service and Support, HP Care Pack, and Warranty Information
Warranty
Three-year limited warranty, parts exchange Next Business day delivery
Enclosures, Hard drives, and Options for the P2000 G3 FC carry their own warranty. Refer to HP's
Limited Warranty Statement for more information.
The P2000 G3 FC has been designed with customer self repairable parts to minimize repair time
and provide greater flexibility in performing defective parts replacement. Please refer to HP's
limited warranty Statement and parts replacement instructions for further details.
http://h18006.www1.hp.com/products/storageworks/warranty.html
Products included in various kits carry their own individual warranties.
NOTE: The warranty of the hard drive options purchased with the P2000 G3 FC product is
different for SAS hard drives versus SATA hard drives. SAS hard drive options have a three year
warranty and SATA hard drives options have a one year warranty.
HP Care Pack Services. Scalable, Flexible, Dependable. Like your storage.
Your storage is evolving. Get scalable support that evolves with it. HP Care Pack Services is an easy-to-buy, easy-to-use
portfolio of packaged services covering your lifecycle needs. You can rely on our highly skilled, HP certified professionals to
offer a breadth of expertise across leading storage technologies, and work side by side with you for optimal results. Push
services beyond expectations and choose support that meets the changing needs of your business with the same reliability,
scalability and flexibility you demand of your storage.
Protect your business beyond the warranty
Standard warranty protects against product defects and some causes of downtime. HP Care Pack Services helps you
proactively guard against unplanned downtime which can reduce your productivity and profitability. By using a standard
approach to warranty uplifts, such as HP Care Pack Services, customers can be more sure of consistency of operations for
both mission-critical and standard business computing.
Extending warranties with HP Care Pack Services
The key to normalizing the warranty of combined solutions-is making service uplift simple: HP Care Pack Services. This
portfolio of predefined packages, extending across the entire IT lifecycle, offering consulting, education, technical support,
optimization, risk assessment, and more. It's entirely flexible allowing customers to extend the cover to the precise level of
support required. Customer's standard hardware warranty, for example, can be upgraded to next-business-day response, to
same-day coverage, or even to a committed six-hour call-to-repair service available 24 hours every day of the week.
Provide consistent, predictable levels of support across your entire department or business
Give you direct access to proven technical and problem-solving expertise
Offer a choice of response-time and repair-time commitments
Are available whenever and wherever you do business
For many products, post-warranty HP Care Pack Services are available when your original warranty has expired. Choose
the support levels that meet your business requirements, from basic to mission-critical. http://www.hp.com/hps/storage
NOTE: Care Pack Services availability may vary by product and country.
DA - 13551 Worldwide QuickSpecs — Version 1 — 2.16.2010
Page 17
QuickSpecs
HP StorageWorks P2000 G3 FC Modular Smart Array
System
Service and Support, HP Care Pack, and Warranty Information
Related Services
Services that will enhance the user experience in many product deployments
HP SAN Solution
Get your SAN implementation right - right from the start.
Service
Storage has become essential to the growth and agility of your
business. That's why choosing an HP SAN as your data management
solution is a smart business decision. But your SAN can deliver the
results you need only if it is implemented correctly and integrated with
your business.
HP Data Migration
Service
SAN installation, startup, and integration call for specialized expertise in
planning and design, hardware configuration, network software
installation, and operability verification. Your SAN needs to be
configured for high performance and availability. And it needs to be
integrated with your applications, management environment, and
business processes.
Minimize the risks involved in transferring data to your HP
StorageWorks SAN.
You need to move your critical enterprise data to your new HP
StorageWorks SAN platform. And you need to accomplish that without
losing data. And without interrupting your ongoing business operations.
HP Data Migration Service helps you lessen the risk of data loss,
minimize threats to data integrity, and avoid productivity-sapping
performance slowdowns during data transport. A highly experienced HP
Services storage specialist works with you to rapidly and securely
migrate mission-critical business information across your data center or
around the globe - regardless of the complexity of your environment.
HP Backup & Recovery This service consists of installation of the ISV backup software for the
Solution Service - ISV
supported SAN environment per HP's and the ISV's quality standards by
a trained service specialist. HP Backup and Recovery Solution Service
for ISV Backup Software provides for the implementation of the
supported ISV backup software in a SAN environment. The two levels of
service described here are based on the size and complexity of the
backup environment.
This service is available for VERITAS NetBackup, VERITAS Backup
Exec, CommVault Galaxy, and Legato NetWorker. Implementation of
CommVault Galaxy is only available as a Level 3 service.
DA - 13551 Worldwide QuickSpecs — Version 1 — 2.16.2010
Page 18
QuickSpecs
HP StorageWorks P2000 G3 FC Modular Smart Array
System
Service and Support, HP Care Pack, and Warranty Information
eSupport
HP eSupport is a portfolio of technology-based services that assist you with managing your
business environment - from the desktop to the data center.
Support Portal
The HP support portal provides one-stop access to the information, tools and services you need
to manage the daily operations of your IT environment.
Features include:
Access to self-solve tools (including search technical knowledge base)
Efficient logging and tracking of support cases
Collaboration with other business and IT professionals
Download of patches and drivers
Access to diagnostic tools
Proactive notification of relevant information
Access to certain features of the support portal requires an HP service agreement. To access the
support portal, visit: http://www.hp.com/support
Remote Support Technology (RST)-HP Remote Support Pack
Taking a more proactive approach to IT support, the HP Remote Support pack plug-in module
easily integrates with HP Systems Insight Manager to provide a powerful, unified "single pane of
glass" solution for onsite and remote management.
HP Remote Support Pack enhances HP Systems Insight Manager with intelligent event diagnosis
plus the automatic submission of hardware event notifications securely to HP support, including
acknowledgment and status returns. It adds remote configuration collections to allow the delivery
of assessment and proactive services for your SAN storage and HP-UX environments.
Customer Technical
Training
Consider education as an integral part of your strategy to get the best return on investment for
your HP storage solution. HP offers a variety of training courses on storage software, networking,
archiving and disk storage systems. Our classes are available in many delivery modalities from
traditional instructor-led courses at one of our 80 training centers worldwide to on-site training
customized to your needs or online. www.hp.com/learn/storage
HP Services Awards
HP Services continues to be recognized for service and support excellence by customers,
partners, industry organizations and publications around the world. Recent honors and award
reflect our services team's dedications, technical expertise, professionalism and uncompromising
commitment to customer satisfaction. For a list of all our awards, please visit:
http://h20129.ww2.hp.com/services/cache/77318-0-0-225-121.html.
Additional Services
Information
For more information about HP Care Pack Services for Storage, please visit:
http://www.hp.com/hps/storage
If you have specific questions, contact your local HP representative. Contact information for a
representative in your area can be found at "Contact HP" http://www.hp.com
Warranty Upgrade
Options
Response - Upgrade on-site response from next business day to same day 4-hour response
or 6 Hour Call To Repair
Coverage - Extend hours of coverage from next business day to 9 hours x 5 days to 24
hours x 7 days
Duration Select duration of coverage for a period of 1, 3, 4 or 5 years
DA - 13551 Worldwide QuickSpecs — Version 1 — 2.16.2010
Page 19
QuickSpecs
HP StorageWorks P2000 G3 FC Modular Smart Array
System
Service and Support, HP Care Pack, and Warranty Information
Software Product
Services
Product support provides the customer access to HP's experienced technical support
resources, as well as access to HP's Information Services database for support on a variety of
multi-vendor/multiplatform software products. Product support includes escalation and problem
coordination with the appropriate engineering group. HP Services offer a variety of options to allow
you to tailor your product service to meet the needs of your organization. Basic warranty on
products can be uplifted from day one to ensure you receive the service you need when you need
it.
Hardware Product
Services
Installation services - StorageWorks MSA Family Disk Array Installation and Startup
On-site Maintenance (includes warranty support)
Response time upgrades during the warranty period
Post-warranty coverage
Customer Self Repair
HP products are designed with many Customer Self Repair (CSR) parts to minimize repair time
and allow for greater flexibility in performing defective parts replacement. If during the diagnosis
period, HP identifies that the repair can be accomplished by the use of a CSR part, HP will ship
that part directly to you for replacement. There are two categories of CSR parts:
Parts for which customer self repair is mandatory. If you request HP to replace these parts,
you will be charged for the travel and labor costs of this service.
Parts for which customer self repair is optional. These parts are also designed for customer
self repair. If, however, you require that HP replace them for your product.
Warranty
The MSA warranty for CSR parts for this product consists of 1-year parts exchange, next business
day.
NOTE: The HP MSA warranty includes support for Customer Self Repair (CSR). The HP MSA
cartridges, terminators, external cables, drives, magazines, controller board and power supplies
are mandatory customer self repair parts. This means both the removal and replacement of the
above parts are designed for easy replacement; the on-site warranty does not extend to these
parts. However, customers may request HP Services to replace these replaceable units (RUs) for
an additional charge. Also, customers who purchase an HP Support Agreement have the option to
perform CSR or receive onsite support.
Please refer to HP's Limited Warranty Statement for further details:
http://h18006.www1.hp.com/products/storageworks/warranty.html
DA - 13551 Worldwide QuickSpecs — Version 1 — 2.16.2010
Page 20
QuickSpecs
HP StorageWorks P2000 G3 FC Modular Smart Array
System
Configuration Information
1. Power Supply 1
2. Power Supply 2
3. Fan 1
1. Service Port
2. Unit Locator
3. Power Switch
HP StorageWorks D2700 Disk Enclosure
Rear Panel components
4. I/O Module A
7. Rear UID push button
5. I/O Module B
8. Enclosure LEDs
6. Fan 2
9. Power on/standby button
P2000 Dual I/O 3.5-inch 12 Drive Enclosure
Rear Panel components
4. DC Voltage / Fan Fault
6. SAS In Port
5. AC Power Good
7. SAS Out Port
Configure to Order Program Information
HP introduces the Configure to Order program for the P2000 G3 family The P2000 G3 models and options may or may not
be factory installed in a rack with add-on controllers, switches, hubs, P2000 disk enclosures and hard drives. The P2000 G3
arrays may be integrated with ProLiant servers or as standalone storage.
Orders to be shipped through the CTO process must have a minimum of two drives ordered per controller. SAN Starter Kits
are not eligible for CTO.
Description
Product #
P2000 G3 FC Controllers & Controller-less Chassis
HP StorageWorks P2000 G3 FC Modular Smart Array Controller
AP836A#0D1
(two 8Gb FC ports)
HP StorageWorks P2000 G3 FC/iSCSI Combo Modular Smart Array Controller
AP837A#0D1
(two 8Gb FC ports and two 1GbE iSCSI ports)
HP StorageWorks P2000 Modular Smart Array 3.5-in Drive Bay Chassis (LFF)
AP838A#0D1
(Will accept one or two controllers or Disk Enclosure I/O modules)
HP StorageWorks P2000 Modular Smart Array 2.5-in Drive Bay Chassis (SFF)
AP839A#0D1
(Will accept one or two controllers, not I/O modules)
Disk Enclosures
DA - 13551 Worldwide QuickSpecs — Version 1 — 2.16.2010
Page 21
QuickSpecs
HP StorageWorks P2000 G3 FC Modular Smart Array
System
Configuration Information
HP StorageWorks P2000 Dual I/O LFF Drive Enclosure, twelve 3.5" drive bays
Used with single or dual controller LFF or SFF array head
HP StorageWorks P2000 LFF Drive Enclosure I/O Module
(no cable included. Designed for use with blank LFF chassis AP838A)
AP843A#0D1
AP844A#0D1
Configured Units
HP StorageWorks P2000 G3 MSA FC Dual Controller LFF Modular Smart Array System
HP StorageWorks P2000 G3 MSA FC Dual Controller SFF Modular Smart Array System
HP StorageWorks P2000 G3 MSA FC/iSCSI Dual Combo Controller LFF Array
HP StorageWorks P2000 G3 MSA FC/iSCSI Dual Combo Controller SFF Array
AP845A#0D1
AP846A#0D1
AW567A#0D1
AW568A#0D1
D2700
AJ941A-#0D1
SAS Drives (SFF 2.5inch)
HP StorageWorks D2700 Disk Enclosure
25 Small Form Factor (SFF) drive bays
HP 146GB 6G SAS 10K 2.5 inch DP ENT HDD
HP 300GB 6G SAS 10K 2.5 inch DP ENT HDD
HP 72GB 6G SAS 15K 2.5 inch DP ENT HDD
HP 146GB 6G SAS 15K 2.5 inch DP ENT HDD
HP 500GB 6G SAS 7.2K 2.5 inch DP MDL HDD
NOTE: Go to the HP Hard Drive Compatibility table for complete drive
compatibility information (http://www.hp.com/products/harddiskdrives). Using
hard drives in unsupported configurations will result in voiding the warranty and
could result in damage to the drive and/or loss of data.
507125-B21
507127-B21
512545-B21
512547-B21
507610-B21
Step 1 - P2000 G3 FC - Base Configuration
Select one:
Model Name
Model Description:
Part Number
HP StorageWorks
Controller-less chassis with twelve Large Form Factor (LFF) MSA2 drive bays.
AP838A
P2000 Modular Smart
Space for two controllers.
Array 3.5-inch Drive Bay
Chassis
HP StorageWorks
Controller-less chassis with twenty-four Small Form Factor (SFF) ProLiant drives
AP839A
P2000 Modular Smart
bays. Space for two controllers.
Array 2.5-inch Drive Bay
Chassis
There are two array-head chassis - one with twelve 3.5-inch large form factor bays, the other with twenty-four 2.5-inch small
form factor drive bays. For an additional twelve drive bays purchase an P2000 3.5-inch Disk Enclosure. You may attach a
total of seven P2000 Drive Enclosures for a total of ninety-six LFF drive bays. For 25 additional SFF drive bays purchase
D2700 JBOD. You may attach a total of five D2700 JBODs for a total of one hundred and forty nine SFF drive bays. Dual
I/O JBODS support both single and dual controller arrays.
DA - 13551 Worldwide QuickSpecs — Version 1 — 2.16.2010
Page 22
QuickSpecs
HP StorageWorks P2000 G3 FC Modular Smart Array
System
Configuration Information
Step 2 - Options
Select each option with quantities specified.
Step 2a - Options
Description with Parts Shipped:
HP StorageWorks P2000 G3 MSA Fibre Channel Controller
(for either the LFF or SFF P2000 or the two DC-powered chassis)
HP StorageWorks P2000 G3 MSA FC/iSCSI Combo Modular Smart Array Controller
(for either the LFF or SFF P2000 or the two DC-powered chassis)
Quantity
1 or 2
1 or 2
Part Number
AP836A
AP837A
Step 2b - SAS and SATA Drive Options
NOTE: SATA drives are designed for archival or reference data. They should not be used in a heavy or intense I/O
environment. Those situations require the use of enterprise-class SAS drives. P2000 3.5-inch drives are for use only with
P2000 products.
P2000 Large Form Factor (LFF) SAS drives for P2000 G3 FC and P2000 3.5-inch Disk Enclosure
HP P2000 300GB 6G SAS 15K rpm LFF (3.5-inch) Dual Port Hard Drive
AP858A
HP P2000 450GB 6G SAS 15K rpm LFF (3.5-inch) Dual Port Hard Drive
AP859A
HP P2000 600GB 6G SAS 15K rpm LFF (3.5-inch) Dual Port Hard Drive
AP860A
MSA2 Large Form Factor (LFF) SATA drives for P2000 array head an P2000 disk enclosure
HP StorageWorks MSA2 1TB 7.2K 3.5-inch SATA LFF HDD
AJ740A
HP P2000 2TB 3G SATA 7.2K rpm LFF (3.5-inch) Dual Port Hard Drive
Check
AW556A
NOTE: This hard drive will be available spring, 2010.
avialability
ProLiant Small Form Factor (SFF) SAS drives for P2000 G3 Array (24 drive bay) and the D2700 JBOD (25 drive bay)
HP 146GB 6G SAS 10K 2.5 inch DP ENT HDD
507125-B21
HP 300GB 6G SAS 10K 2.5 inch DP ENT HDD
507127-B21
HP 72GB 6G SAS 15K 2.5 inch DP ENT HDD
512545-B21
HP 146GB 6G SAS 15K 2.5 inch DP ENT HDD
512547-B21
ProLiant Small Form Factor (SFF) SAS MidLine drive for P2000 G3 Array (24 drive bay) and the D2700 JBOD (25
drive bay)
HP 500 GB 6G SAS 7.2K 2.5 inch SFF DP MDL HDD
507610-B21
Step 2c - Drive Enclosure Options
Use either disk enclosure with Large or Small Form Factor, single or dual controller array heads. Each ship with two .5m
mini-SAS to mini-SAS cables.
HP StorageWorks P2000 Dual I/O 3.5-inch 12 Drive Disk Enclosure
AP843A
HP StorageWorks D2700 Dual I/O 2.5-inch 25 Drive Disk Enclosure
AJ941A
HP StorageWorks P2000 Drive Enclosure I/O Module
AP844A
(Only used in conjunction with the P2000 blank chassis (AP838A) if a single I/O disk
enclosure is desired. No cable included)
Step 2c - SAS Cable Options
miniSAS to miniSAS Cables:
Connecting P2000 G3 FC controller to a JBOD if a longer cable is desired.
HP Ext miniSAS to miniSAS 1m Cable
HP Ext miniSAS to miniSAS 2m Cable
DA - 13551 Worldwide QuickSpecs — Version 1 — 2.16.2010
407337-B21
407339-B21
Page 23
QuickSpecs
HP StorageWorks P2000 G3 FC Modular Smart Array
System
Configuration Information
Step 3 - Other MSA2300fc Options
Choose optional Power Cord for Non-U.S. Configurations
NOTE: Shipped standard with all units.
2 ea. Power Cord, 110/220 VAC, US/Canada/Mexico 227099-001
Power Cord, 220/240 VAC, (US/Canada/Mexico)
Power Cord, (Australia/China/New Zealand)
Power Cord, (Central Europe)
Power Cord, (United Kingdom/Hong Kong)
Power Cord, (Switzerland)
Power Cord, (Italy)
Power Cord, (Denmark)
Power Cord, (Japan)
Power Cord, (South East Asia/India)
2
2
2
2
2
2
2
2
2
227099-001
227098-001
157215-001
157216-001
157219-001
157217-001
157218-001
139867-001
157220-001
Step 4 - Choose Supported Options For Fibre Channel Infrastructure
Fibre Channel
Host Bus Adapters X86 servers
Fibre Channel
Host Bus Adapters Integrity servers
Model
Description
QLogic QMH2562 8Gb FC HBA for HP c-Class BladeSystem
HP BLc Emulex LPe1205- 8Gb FC HBA for HP c-Class BladeSystem
Lpe1105-HP 4Gb FC HBA for HP c-Class BladeSystem
QMH2462 4Gb FC HBA for HP c-Class BladeSystem Windows and Linux
QLogic QMH4062 1GbE iSCSI HBA for HP BladeSystem c-Class, Windows and
Linux
StorageWorks Fibre Channel HBA
NOTE: The following is a list of all Fibre Channel Host Bus Adapters for
Windows and Linux. For detailed compatibility information please see:
http://h18006.www1.hp.com/storage/saninfrastructure/hba.html
Brocade Fibre Channel HBAs
HP StorageWorks 81B PCI-e FC HBA Single Port
HP StorageWorks 82B PCI-e FC HBA Dual Port
HP StorageWorks 41B 4Gb PCI-e FC HBA
HP StorageWorks 42B 4Gb Dual-Port PCI-e FC HBA
Emulex Fibre Channel HBAs
HP StorageWorks 81E PCI-e FC HBA Single Port
HP StorageWorks 82E PCI-e FC HBA Dual Port
HP StorageWorks FC2142 4Gb PCI-e HBA
HP StorageWorks FC2242 Dual Channel 4Gb PCI-e HBA
QLogic Fibre Channel HBAs
HP StorageWorks 81Q PCI-e FC HBA Single Port
HP StorageWorks 82Q PCI-e FC HBA Dual Port
HP StorageWorks FC1142 4Gb PCI-e HBA
HP StorageWorks FC1242 Dual Channel 4Gb PCI-e HBA
Integrity
HP-UX v3 and v2
Integrity
HP-UX v3, and v2
Part Number
451871-B21
456972-B21
403621-B21
403619-B21
488074-B21
AP769A
AP770A
AP767A
AP768A
AJ762A
AJ763A
A8002A
A8003A
AK344A
AJ764A
AE311A
AE312A
HP PCI-X 2.0 1Port 4Gb
AB378B
HP PCI-X 2.0 2Port 4Gb Fibre Channel HBA
AB379B
DA - 13551 Worldwide QuickSpecs — Version 1 — 2.16.2010
Page 24
QuickSpecs
HP StorageWorks P2000 G3 FC Modular Smart Array
System
Configuration Information
Fibre Channel
Switches
Integrity
HP-UX v3 and v2
Integrity server blades
BL860c and BL870c
HP-UX v3 and v2
Integrity
HP-UX v3 and v2
Integrity
HP-UX v3 and v2
Integrity server blades
BL860c and BL870c
HP-UX v3
Integrity
HP-UX v3
Integrity
HP-UX v3
Integrity
HP-UX v3
HP PCIe 2Port 4Gb Fibre Channel HBA
Integrity
HP-UX v3 and v2
Integrity
HP-UX v3 and v2
Integrity
HP-UX v3 and v2
HP BLc QLogic QMH2462 FC HBA Opt Kit
AD300A
403619-B21
HP PCIe 1Port 4Gb Fibre Channel HBA
AD299A
HP PCIe 2-Port 4Gb Fibre Channel HBA
AD335A
HP BLc Emulex LPe1105 FC HBA Opt Kit
403621-B21
HP PCIe 1p 4Gb FC and 1p 1000BT Adapter
AD221A
HP PCIe 2p 4Gb FC and 2p 1000BT Adapter
AD222A
HP PCIe 2p 4Gb FC and 2p 1000BSX Adapter
AD393A
PCI-X 2Gb Fibre Channel/1000Base-SX HBA
A9782A
HP PCI-x 1p 4Gb FC and 1p 1000BT Adapter
AD193A
HP PCI-x 2p 4Gb FC and 2p 1000BT Adapter
AD194A
HP StorageWorks 8/8 Base SAN Switch
HP StorageWorks 8/8 SAN Switch
HP StorageWorks 8/24 Base SAN Switch
HP StorageWorks 8/40 Base SAN Switch
HP StorageWorks 8/40 Power Pack+ SAN Switch
HP StorageWorks 8/80 Power Pack+ SAN Switch
HP StorageWorks 8/80 Base SAN Switch
HP StorageWorks 1606 Power Pack+ Extension SAN Switch
HP StorageWorks 1606 Full Extension SAN Switch
HP StorageWorks 1606 Base Extension SAN Switch
HP StorageWorks 2408 FCoE Base Converged Network Switch
HP StorageWorks 2408 FCoE Power Pack+ Converged Network Switch
HP StorageWorks Encryption SAN Switch
HP StorageWorks 4/256 SAN Director
HP StorageWorks 4/256 Power Pack SAN Director
HP StorageWorks DC SAN Backbone Director
HP StorageWorks DC04 Power Pack+ SAN Director
HP StorageWorks DC04 SAN Director
Brocade 8/12c SAN Switch for HP BladeSystem c-Class
Brocade 8/24c SAN Switch for HP BladeSystem c-Class
Brocade 8/24c SAN Switch for HP BladeSystem c-Class Power Pack+
8 Gb Simple SAN Connection
HP StorageWorks 8/20q Fibre Channel Switch (8 switch ports active)
HP StorageWorks 8Gb Simple SAN Connection Kit (8 switch ports active)
AM866A
AM867A
AM868A
AM869A
AM870A
AM872A
AM871A
AP864A
AP863A
AP862A
AP801A
AP802A
AR944A
A7988A
A7989A
AK857A
AR479A
AR478A
AJ820A
AJ821A
AJ822A
DA - 13551 Worldwide QuickSpecs — Version 1 — 2.16.2010
Page 25
AQ233A
AK241A
QuickSpecs
HP StorageWorks P2000 G3 FC Modular Smart Array
System
Configuration Information
HP StorageWorks 8/20q Fibre Channel Switch (16 switch ports active)
HP SN6000 Stackable 8Gb 24-port sgl pwr supply FC Switch
HP SN6000 Stackable 8Gb 24-port dual pwr supply FC Switch
Cisco MDS 9124 8-ports Active Fabric Switch
Cisco MDS 9124 16-ports Active Fabric Switch
Cisco MDS 9124 24-ports Active Fabric Switch
Cisco MDS 9124e 12-port Fabric Switch for HP c-Class BladeSystem
Cisco MDS 9124e 24-port Fabric Switch for HP c-Class BladeSystem
Cisco MDS 9134 24-ports Active Fabric Switch
Cisco MDS 9134 32-ports Active Fabric Switch
Cisco MDS 9134 26-ports Active w/kit for 48 port solution
Cisco MDS 9134 34-ports Active w/kit for 64 port solution
MDS 9222i Multiservice Modular Switch w/0 SFPs
Cisco MDS 9216i w/o Ethernet SFP switch
Cisco MDS 9216i
MDS 9506 Director with Supervisor 2
AK242A
AW575A
AW576A
AG646A
AG647A
AG648A
AG641A
AG642A
AG874A
AG875A
AJ732A
AJ733A
AG851A
AE390A
AE390A
AE388A
MDS 9509 Director with Supervisor 2
MDS 9513 Director with Supervisor 2
MDS 9513 Director with Fabric 2 Module
AE389A
AE376A
AJ905A
Fibre Channel Cables 2 m LC-LC Multi-Mode Fibre Channel Cable
5 m LC-LC Multi-Mode Fibre Channel Cable
15 m LC-LC Multi-Mode Fibre Channel Cable
30 m LC-LC Multi-Mode Fibre Channel Cable
50 m LC-LC Multi-Mode Fibre Channel Cable
2 m LC-SC Multi-Mode Fibre Channel Cable
5 m LC-SC Multi-Mode Fibre Channel Cable
15 m LC-SC Multi-Mode Fibre Channel Cable
30 m LC-SC Multi-Mode Fibre Channel Cable
50 m LC-SC Multi-Mode Fibre Channel Cable
DA - 13551 Worldwide QuickSpecs — Version 1 — 2.16.2010
221692-B21
221692-B22
221692-B23
221692-B26
221692-B27
221691-B21
221691-B22
221691-B23
221691-B26
221691-B27
Page 26
QuickSpecs
HP StorageWorks P2000 G3 FC Modular Smart Array
System
Configuration Information
Step 5 - Choose Rack Options
Select each required option with quantities specified.
Rack Cabinet, Customer Assembled
5642 - 5000 Series rack
14U rack
HP S10614 Rack with Shock Pallet
358254-B21
292302-B22
Rack Cabinets 10622 G2
10622 G2 Universal Rack w/Shock Pallet
10622 G2 Universal Rack w/Standard Pallet
AF022A
AF021A
Rack Cabinets under 10636 G2
10636 G2 (36U) Rack Cabinet - Pallet
10636 G2 (36U) Rack Cabinet - Shock Pallet
10636 G2 (36U) Rack Cabinet - Crated
10636 G2 (36U) Rack Cabinet, with Extension - Shock Pallet
AF011A
AF012A
AF013A
AF014A
Rack Cabinets 10642 G2
10642 G2 (42U) Rack Cabinet - Pallet
10642 G2 (42U) Rack Cabinet - Shock Pallet
10642 G2 (42U) Rack Cabinet - Crated
10642 G2 (42U) Rack Cabinet, with Extension - Shock Pallet
Modular Cooling System G2 (MCS G2)
MCS G2 10642 G2 Expansion Rack
AF001A
AF002A
AF003A
AF004A
AF025A
AF026A
Rack Cabinets 10842 G2
10842 G2 Universal Rack w/Shock Pallet
10842 G2 Universal Rack w/Standard Pallet
AF042A
AF041A
Rack Cabinets 10647 G2
10647 Rack G2 Pallet
AF031A
DA - 13551 Worldwide QuickSpecs — Version 1 — 2.16.2010
Page 27
HP StorageWorks P2000 G3 FC Modular Smart Array
System
QuickSpecs
Technical Specifications
P2000 G3 FC
P2000 G3 FC/iSCSI
POWER REQUIREMENTS
Input Power
Requirements
(typical-running I/O)
8G FC (2 Port - 8G FC)
110 VAC ; 3.7A,370W 220VAC. 1.7A,408W
FC/iSCSI Combo ( 2 Port- 8G FC + 2 Port - 1G iSCSI)
110 VAC ; 3.9A,390W 220VAC. 1.7A,408W
Max Input Power
100-240 VAC, 50/60 Hz., 4.5-1.9A; 48-60 VDC 10.4A/8.3A
Heat Dissipation
1622 BTU/hr
TEMPERATURE AND HUMIDITY RANGES
Operating Temperature 41°F to 104°F (5°C to 40°C)
Shipping Temperature
-40°F to 158°F (-40°C to 70°C)
Operating Humidity
10% to 90% RH @ 104°F (40°C) non-condensing
Non-Operating Humidity Up to 93% RH @ 104°F (40°C)
DECLARED ACOUSTIC NOISE LEVELS
Sound Power
A weighted sound power LWAd=6,75 B
Sound Pressure
A weighted sound pressure LpAm - 55dB
SHOCK AND VIBRATION
Shock, Operational
Shock, Non-Operational
Vibration, Operational
Vibration, NonOperational
PHYSICAL
Height
Depth (excluding cables)
(back of ear to back of
controller handle)
Width (body only)
Chassis Weight
(no controllers)
P2000 G3 FC and
FC/iSCSI Combo
Controller
10G's for 10 milliseconds
15G 11ms half sine
5-500Hz, 0.21Grms flat
3-365-3Hz, 1.22 Grms,z-axis,0.85 Grms, X&Y axis shaped spectrum
3.5 in/ 8.9 cm
P2000 G3 FC SFF 24-bay array: 20.28 in / 51.510 cm
P2000 G3 FC LFF 12-bay array: 21.3 in. / 55.1 cm
17.6 in / 44.7 cm (w/ ears 19 in / 48.26 cm)
P2000 LFF chassis: 44 lbs.
P2000 SFF chassis: 43 lbs
User Interface
Status and activity provided via management interfaces. Status
Indicators on front of Controller
RAID Support
0, 1, 3, 5, 6, 10, 50
Cache Memory
1GB Read/Write. ECC protection with backup to Flash memory
(indefinite backup)
Cache Backup
ECC protection with back up to flash memory (indefinite backup)
Upgradeable Firmware yes
Disk Drive and
6 Gb SAS - Serial Attached SCSI
Enclosure Protocol
Support
Expansion Port
SAS (SFF8088) 4x lane 6 Gb SAS
DA - 13551 Worldwide QuickSpecs — Version 1 — 2.16.2010
Page 28
QuickSpecs
HP StorageWorks P2000 G3 FC Modular Smart Array
System
Technical Specifications
P2000 G3
Regulatory Info
Safety
Electromagnetic
Compatibility
RoHS and WEEE
Country Approvals
UL 60950-1 (USA)
CAN/CSA-C22.2 No.60950-1-03 (Canada)
EN 60950-1 (European Union)
GS mark (Germany)
IEC 60950-1 (International)
CCC Mark (power supply only, China PRC)
VCCI:2008-04 Class A (Japan)
FCC 15:109(g) Class A (USA)
ICES-003:2004 Class A (Canada)
EN55022 : (European Union Class A); CISPR 22 (International Class A)
EN61000-3-2 : (Harmonics) (European Union)
EN61000-3-3 : (Flicker) (European Union)
EN 55024 (European Union, Immunity, Class A);CISPR 24
(International Immunity, Class A)
AS/NZS CISPR 22, Class A (Australia, New Zealand)
CNS 13438 Taiwan, Class A (Taiwan)
KN22 Class A (Emissions Class A); KN24 (Immunity) (S Korea)
RoHS-6/6 Compliance, China RoHS, WEEE
United States ,Australia/New Zealand, Canada, China (PRC), European
Union, Germany (GS Mark), Japan, South Korea, Taiwan
© Copyright 2010 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel is a US registered trademark of
Intel Corporation. Unix is a registered trademark of The Open Group.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
DA - 13551 Worldwide QuickSpecs — Version 1 — 2.16.2010
Page 29