Yamaha HTR-3066 User manual

Add to my manuals
8 Pages

advertisement

Yamaha HTR-3066 User manual | Manualzz
UAB
1 Preparation
AV Receiver
Accessories
Check that the following accessories are supplied with the product.
… Remote control
… Batteries (AAA, R03, UM-4) (x2)
*The supplied remote control varies
depending on the model and the
region of purchase.
Easy Setup Guide
Insert the batteries the right way round.
… AM antenna
English
To reduce the impact on natural resources, the Owner’s Manual for this product is
supplied on CD-ROM. For more information about this product, refer to the
… YPAO microphone
(HTR-3066 only)
*The supplied FM antenna
varies depending on the
region of purchase.
… CD-ROM
(Owner’s Manual)
This document explains how to set up a 5.1-channel system and play
back surround sound from a BD/DVD on the unit.
… FM antenna
… Safety Brochure
… Easy Setup Guide
• The illustrations of the main unit and remote control used in this guide are of the HTR-3066 (U.S.A.
model), unless otherwise specified.
• (HTR-3066 [Australia model] only)
For information on how to control external devices with the remote control, refer to “Supplement for
Remote Control” on the supplied CD-ROM.
Owner’s Manual on the supplied CD-ROM.
Cables required for connections
PDF versions of this guide and “Owner’s Manual” can be downloaded from the
following website.
http://download.yamaha.com/
[For U.S. customers only]
Visit the following website for additional information, FAQ’s, downloads such as
“Owner’s Manual” and product updates.
http://usa.yamaha.com/support/
The following cables (not supplied) are required to build the system described in this
document.
• Speaker cables (x5)
• HDMI cable (x2)
• Audio pin cable (x1)
• Digital optical cable (x1) (not required if your TV supports ARC [Audio Return Channel])
2 Placing speakers
Set up the speakers in the room using the following diagram as a reference.
For information on other speaker systems, refer to “Owner’s Manual”.
1
9
2
3
4
5
10° to 30°
1 Front speaker (L)
2 Front speaker (R)
3 Center speaker
4 Surround speaker (L)
5 Surround speaker (R)
9 Subwoofer
2
En
10° to 30°
3 Connecting speakers/subwoofer
• (U.S.A. and Canada models only)
Under its default settings, the unit is configured for 8-ohm
speakers. When connecting 6-ohm speakers, set the unit’s
speaker impedance to “6 Ω MIN”. For details, see “Setting the
speaker impedance” in “Owner’s Manual”.
Using a banana plug
(U.S.A., Canada, Australia and General models only)
a Tighten the speaker terminal.
1
Connect the front speakers (1/2)
to the FRONT (//\) terminals.
b Insert a banana plug into the end of the terminal.
The unit (rear)
• Use a subwoofer equipped with built-in amplifier.
• Before connecting the speakers, remove the unit’s power cable
from the AC wall outlet and turn off the subwoofer.
• Ensure that the core wires of the speaker cable do not touch
each other or come into contact with the unit’s metal areas. This
may damage the unit or the speakers. If the speaker cables
short circuit, “Check SP Wires” will appear on the front display
when the unit is turned on.
SPEAKERS
Banana plug
FRONT
a
SURROUND
CENTER
FR
ON
T
b
SUBWOOFER
PRE OUT
(Connecting center/surround speakers)
■ Connecting speaker cables
Speaker cables have two wires. One is for connecting
the negative (-) terminals of the unit and the speaker,
and the other is for the positive (+) terminals. If the wires
are colored to prevent confusion, connect the black wire
to the negative and the other wire to the positive
terminals.
a Remove approximately 10 mm (3/8”) of insulation from
the ends of the speaker cable and twist the bare wires of
the cable firmly together.
b Press down the tab.
c Insert the bare wires of the cable into the hole in the
terminal.
RO
UN
(Connecting front speakers)
a Remove approximately 10 mm (3/8”) of insulation from
the ends of the speaker cable and twist the bare wires of
the cable firmly together.
b Loosen the speaker terminal.
1
2
d Release the tab.
D
a
CE
NT
d
9
ER
3
b + (red)
c
- (black)
4
5
c Insert the bare wires of the cable into the gap on the side
(upper right or bottom left) of the terminal.
d Tighten the terminal.
+ (red)
b
c
FR
ON
T
d
a
- (black)
En
3
2
Connect the center speaker (3) to the
CENTER terminal.
3
Connect the surround speakers
(4/5) to the SURROUND (//\)
terminals.
4
Connect the subwoofer (9) to the
SUBWOOFER PRE OUT jack.
• Use a subwoofer equipped with built-in amplifier.
The unit (rear)
The unit (rear)
SPEAKERS
FRONT
FRONT
SURROUND
The unit (rear)
SPEAKERS
SPEAKERS
SURROUND
CENTER
FRONT
CENTER
SURROUND
SUBWOOFER
PRE OUT
SUBWOOFER
PRE OUT
CENTER
SUBWOOFER
PRE OUT
Audio pin cable
1
9
4
4
En
2
1
3
9
5
4
1
2
3
9
5
4
2
3
5
4 Connecting external devices
Before connecting the power cable (General model only)
Make sure you set the switch position of
VOLTAGE SELECTOR according to your local voltage.
Voltages are AC 110-120/220-240 V, 50/60 Hz.
TV
Audio out
(optical)
HDMI in
HDMI out
HDMI
HDMI
HDMI
HDMI
1
BD/DVD player
OPTICAL
O
Connect external devices to the unit.
a Connect a BD/DVD player to the unit with an HDMI
cable.
If the BD/DVD player is currently connected to the
TV directly with an HDMI cable, disconnect the
cable from the TV and connect it to this unit.
b Connect a TV to the unit with the other HDMI cable.
b
c
a
HDMI OUT
jack
c Connect a TV to the unit with a digital optical cable.
This connection is required to play back TV audio
on the unit. This connection is not required if your
TV supports ARC (Audio Return Channel).
VOLTAGE SELECTOR
(General model only)
VOLTAGE
SELECTOR
HDMI 1 jack
HDMI
d Connect the power cable to an AC wall outlet.
HDMI
110V120V
220V240V
ARC
• For information on how to connect radio antennas or other
external devices, see “PREPARATIONS” in “Owner’s Manual”.
(BD/DVD)
HDMI OUT
HDMI 1
ARC
2
Turn on the unit, the TV and the BD/DVD
player.
3
Use the TV remote control to change the
TV input to video from the unit.
ANTENNA
(BD/DVD)
HDMI OUT
HDMI 2
HDMI 1
HDMI 3
HDMI 4
AM
FM
COMPONENT
VIDEO
PR
PR
PB
PB
Y
Y
COMPONENT
VIDEO
SPEAKERS
FRONT
SURROUND
MONITOR OUT
VIDEO
CENTER
d
MONITOR OUT
The connections are complete.
O
OPTICAL
COAXIAL
COAXIAL
(CD)
( TV )
AV 1
AV 2
AV 3
AV 4
OPTICAL
AV 4 (OPTICAL) jack
( TV )
OPTICAL
AV
OUT
AV 5
AUDIO 1
SUBWOOFER
PRE OUT
AUDIO
OUT
AUDIO 2
To an AC wall
outlet
AV 4
The unit (rear)
YPAO MIC
Turn on the unit
INFO
MEMORY
PRESET
FM
AM
TUNING
VOLUME
(HTR-3066)
Proceed to the next page to optimize the speaker
settings.
(HTR-2866)
Proceed to “Playing back a BD/DVD” on the last page.
(As necessary, configure the speaker settings manually.
For details, refer to “Owner’s Manual” on the supplied
CD-ROM.)
SCENE
BD
DVD
PHONES
INPUT
TONE CONTROL
CD
TV
PROGRAM
RADIO
STRAIGHT
SILENT CINEMA
VIDEO AUX
AUDIO
VIDEO
5V
1A
The unit (front)
(HTR-3066 U.S.A. model)
• By connecting a TV to the unit with an HDMI cable, you can
configure the unit’s settings with the menu displayed on the TV. In
addition, you can select the on-screen menu language from English
(default), Japanese, French, German, Spanish, Russian, Italian and
Chinese. For details, refer to “Owner’s Manual”. In this guide,
illustrations of English menu screens are used as examples.
En
5
HTR-3066 only
5 Optimizing the speaker settings automatically (YPAO)
1
Connect the YPAO microphone to the
YPAO MIC jack on the front panel.
The following screen appears.
The Yamaha Parametric room Acoustic Optimizer (YPAO) function detects speaker connections, measures the
distances from them to your listening position(s), and then automatically optimizes the speaker settings, such as
volume balance and acoustic parameters, to suit your room.
Auto Setup
• During the measuring process, test tones are output at high volume. Ensure that
the test tones do not frighten small children. Also, refrain from using this function at
night when it may be a nuisance to others.
Start
TRANSMIT
Exit
SLEEP
HDMI
• During the measuring process, you cannot adjust the volume.
• During the measuring process, keep the room as quiet as possible.
1
2
1
2
3
4
3
4
AV
• Do not connect headphones.
AUDIO
5
• Do not stand between the speakers and the YPAO microphone during the
measurement process (about 3 minutes).
• Move to the corner of the room or leave the room.
1
2
V-AUX
USB
VOL.
MODE
TUNER
FM
INFO
The unit (front)
MOVIE
[SETUP]:Start
AM
PRESET
Preparing for YPAO
Press SETUP key
to Start
RECEIVER
TUNING
MEMORY
L
SL
SW
C
R
SR
MUSIC SUR. DECODE STRAIGHT
ENHANCER
Turn on the subwoofer and set
the volume to half. If the
cross-over frequency is
adjustable, set it to maximum.
SCENE
BD
DVD
TV
SETUP
CROSSOVER/
HIGH CUT
RADIO
VOLUME
RETURN
MUTE
MIN
MAX
MIN
MAX
YPAO microphone
Listening position
• To cancel the operation, disconnect the YPAO microphone, or
use the cursor keys to select “Exit” and press ENTER, before
starting the measurement.
SETUP
OPTION
ENTER
VOLUME
CD
Cursor keys
ENTER
2
To start the measurement, press SETUP.
The measurement will start in 10 seconds.
The following screen appears on the TV when
the measurement finishes.
Auto Setup
Start
Exit
Measurement
Finished
Result
3 / 2 / 0.1 ch
3.0 / 10.5 m
-3.0 / +10.0 dB
OK:ENTER
Ear height
Place the YPAO microphone at your
listening position (same height as your
ears). We recommend the use of a
tripod as a microphone stand. You can
use the tripod screws to fix the
microphone in place.
6
En
VOL.
Finished
L
SL
SW
C
R
SR
HTR-3066 only
If “W-1:Out of Phase” appears
• If any error message (such as E-1) or warning message (such
as W-2) appears, see “Error messages” or “Warning
messages” in “Owner’s Manual”.
• If the warning message “W-1:Out of Phase” appears, see “If
“W-1:Out of Phase” appears”.
3
Use the cursor keys (e/r) to select
“SAVE” (Save) and press ENTER.
Follow the procedure below to check the speaker
connections.
Auto Setup
Measurement
Finished
Start
Result
Exit
3 / 2 / 0.1 ch
3.0 / 10.5 m
-3.0 / +10.0 dB
Auto Setup
Start
Exit
OK:ENTER
Measurement
Finished
SAVE
Warning
message
W-1:Out of Phase
Result
3 / 2 / 0.1 ch
3.0 / 10.5 m
a Check for the blinking of the front display’s indicator to
identify the problem speaker.
-3.0 / +10.0 dB
Problem speaker (blinks)
VOL.
VOL.
>SaveCancel
4
L
SL
SW
C
R
SR
Disconnect the YPAO microphone from the
unit.
This completes optimization of the speaker settings.
• The YPAO microphone is sensitive to heat, so should not be
placed anywhere where it could be exposed to direct sunlight or
high temperatures (such as on top of AV equipment).
W-1:PHASE
L
SL
SW
C
R
SR
b Check the cable connections (+/-) of the problem
speaker.
If the speaker is connected correctly:
Depending on the type of speakers or room
environment, this message may appear even if the
speakers are connected correctly.
Proceed to step 3.
If the speaker is connected incorrectly:
Turn off the unit, reconnect the speaker cable, and then
try YPAO measurement again.
En
7
6 Playing back a BD/DVD
Now let’s play back a BD/DVD.
We recommend playing back multichannel audio
(5.1-channel or more) to feel surround sound produced
by the unit.
Many more features!
1
Press HDMI 1 to select “HDMI 1” as the
input source.
The unit has various other functions.
Please refer to “Owner’s Manual” on the supplied
CD-ROM to help you get the most out of the unit.
VOL.
HDMI1
TRANSMIT
L
SL
SW
C
R
SR
RECEIVER
SLEEP
HDMI
1
2
1
2
3
4
3
4
HDMI 1
AV
AUDIO
5
1
2
2
3
V-AUX
USB
Start playback on the BD/DVD player.
Press STRAIGHT repeatedly to select
“STRAIGHT”.
MODE
AM
INFO
MEMORY
PRESET
MOVIE
STRAIGHT
TUNING
MUSIC SUR. DECODE STRAIGHT
L
SL
SW
C
R
SR
STRAIGHT
ENHANCER
• When “STRAIGHT” (straight decode) is enabled, each
speaker produces each channel audio signal directly (without
sound field processing).
SCENE
BD
DVD
TV
SETUP
CD
RADIO
OPTION
ENTER
Connect audio devices (such as CD player),
game consoles, camcorders, and many others.
Selecting the sound mode
VOL.
TUNER
FM
Connecting other playback
devices
VOLUME
VOLUME
4
Press VOLUME to adjust the volume.
RETURN
Volume -30.0dB
L
SL
SW
C
Playing back from iPod
(HTR-3066 only)
By using a USB cable supplied with iPod, you
can enjoy iPod music on the unit.
VOL.
MUTE
Select the desired sound program (CINEMA
DSP) or surround decoder suitable for movies,
music, games, sports programs, and other
uses.
R
SR
This completes the basic setup procedure.
If surround sound is not working
Sound is only being output from the front speakers
during multichannel audio playback
Check the digital audio output setting on the BD/DVD
player.
■ Listening to FM/AM radio
■ Playing back music stored on
a USB storage device
(HTR-3066 only)
For more information, see “What you can do
with the unit”.
It may be set to 2-channel output (such as PCM).
No sound is coming from a specific speaker
See “Troubleshooting” in “Owner’s Manual”.
© 2013 Yamaha Corporation
Printed in China ZF39050

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement