Sanus VLT16 Super Slim Tilting Wall Mount For 40" – 85" flat-panel TVs Installation manual

Add to my manuals
24 Pages

advertisement

Sanus VLT16 Super Slim Tilting Wall Mount For 40

VLT16

INSTRUCTION MANUAL

We’ll Make It Stress-Free

If you have any questions along the way, just give us a call.

1-800-359-5520. We’re ready to help!

Scan for easy install video http://san.us/675

IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE

1

Before getting started, let’s make sure this mount is perfect for you!

Does your TV weigh more than 125 lb (56 kg) including accessories?

125 lb

(56 kg)

No — Perfect!

Yes — This mount is NOT compatible. Visit MountFinder.Sanus.com or call 1-800-359-5520 (UK: 0800-056-2853) to fi nd a compatible mount.

2 What is your wall made of?

Drywall with wood studs

Perfect!

Solid concrete or concrete block

Perfect!

?

Unsure?

Call 1-800-359-5520 (UK: 0800-056-2853)

3 Do you have all of the tools needed?

2

4

7/32 in.

(5.5 mm)

Wood

3/8 in.

(10 mm)

Concrete

1/2 in.

(13 mm)

Ready to begin?

Please read through these instructions completely to be sure you’re comfortable with this easy install process. Also check your TV owner’s manual to see if there are any special requirements for mounting your TV.

If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, contact

Customer Service at 1-800-359-5520 (UK: 0800-056-2853).

Features

TV brackets designed to fi t TV hole patterns from 200 x 200 mm up to 750 x 400 mm

Brackets adjust side to side within the wall plate for optimal positioning

Level adjustments create a worry-free installation

TV tilts for the perfect viewing angle

Kick stands hold TV from wall to create room to attach cables

Adjustment knobs allow fi ngertip control or to restrict movement

3

4

Dimensions

in.

[mm]

2.00

50.8

17.25

438.1

29.28

743.8

27.00

685.8

UP TO 29.53

750.0

12.00

304.8

LEVEL ADJUST

15.75

400.0

3.31

84.0

in.

[mm]

10°

0.99

25.1

0.99

25.1

5

Supplied Parts and Hardware

WARNING: This product contains small items that could be a choking hazard if swallowed.

Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts!

NOTE: Not all hardware included will be used.

STEP 1 Parts and Hardware

TV Screws 03 x4

M6 x 12mm

04 x4

M8 x 16mm

05 x4 M4 x 12mm

06 x4

M6 x 20mm

07 x4

M8 x 20mm

6

TV Bracket

01 x1

TV Bracket

02 x1

08 x4 M4 x 35mm

11 x4

M4

M4

09 x4

Washers

12 x4

M6 x 35mm

M6/M8

M6 / M8

10 x4

M8 x 35mm

Spacers

13 x4

Spacer

STEP 2 Parts and Hardware

15 x3

16 x3

Lag Bolts

5⁄16 in. x 2 3⁄4 in.

Concrete Anchors

Wall Plate

14 x1

Washers

5/16 in.

x3

Adjustments

M3

Allen Key

18 x1

7

8

STEP 1 Attach Brackets to TV

1-1 Select TV Screw Diameter

Hand thread screws into the threaded inserts on the back of your TV to determine which screw diameter ( M4, M6, or M8 ) to use.

1-2 Select TV Screw Length

If your TV has a flat back, use the shorter screws.

Spacers and longer screws are supplied to accommodate:

● irregular / round back TVs

● TVs with inset mounting holes

● extra space needed for cables a b

M4 M6 M8

CAUTION:

Verify adequate thread engagment with the screw or screw/spacer combination.

-

Too short will not hold the TV.

-

Too long will damage the TV.

FLAT BACK ROUND BACK INSET HOLES CABLES

Too Short

Correct

Too Long

1-3 Attach TV Brackets

Center the TV brackets 01 and 02 over your TV hole pattern as shown - making sure the brackets are level.

Install using either the short screw and washer or spacer, long screw and washer combination you selected for your TV.

02

01 a

Short screw and washer

03

04

05

06

07

11

12 b

Spacer, long screw and washer

13 08

09

10

11

12

9

STEP 2 Attach Wall Plate - Wood Stud Option

CAUTION: Avoid potential personal injuries and property damage!

● Drywall covering the wall must not exceed 16 mm (5/8 in.)

● Minimum wood stud size: common 51 x 102 mm (2 x 4 in.) nominal 38 x 89 mm (1 1/2 x 3 1/2 in.)

● Minimum horizontal space between fasteners: 406 mm (16 in.)

1. Locate studs. Verify the center of the stud(s) using an awl, a thin nail, or an edge to edge stud finder.

NOTE:

For assistance in determining wall plate location, see HeightFinder at sanus.com.

2. Level the wall plate 14 and mark the hole locations in the center of the studs.

1 2

≤16 mm

(5/8 in.)

406-610 mm

(16-24 in.)

10

14

3. Remove the wall plate 14 and drill pilot holes.

IMPORTANT : Be sure to drill into the center of the stud.

IMPORTANT : Pilot holes must be drilled to a depth of 75 mm (3 in.), using a 5.5 mm (7/32 in.) diameter drill bit.

4. Install wall plate 14 using lag bolts 15 and washers 17 . Tighten the lag bolts only until the washers are pulled firmly against the wall plate.

CAUTION: Improper use could reduce the holding power of the lag bolt. DO NOT over-tighten the lag bolts .

3 4

75 mm

(3 in.)

5.5 mm

(7/32 in.)

14

15

17

11

STEP 2 Attach Wall Plate - Solid Concrete or Concrete Block Option

CAUTION: Avoid potential personal injuries and property damage!

● Mount the wall plate directly onto the concrete surface

● Minimum solid concrete thickness: 203 mm (8 in.)

● Minimum concrete block size: 203 x 203 x 406 mm (8 x 8 x 16 in.)

● Minimum horizontal space between fasteners: 203 mm (8 in.)

1. Level the wall plate 14 and mark three hole locations.

NOTE:

For assistance in determining wall plate location, see HeightFinder at sanus.com.

2. Remove the wall plate 14 and drill pilot holes into concrete. Never drill into the mortar between blocks.

IMPORTANT: Pilot holes must be drilled to a depth of 75 mm (3 in.), using a 10 mm (3/8 in.) diameter drill bit.

1 2

75 mm

(3 in.)

10 mm

(3/8 in.)

14

12

3. Insert concrete anchors 16 .

CAUTION: Be sure the anchors are seated flush with the concrete surface.

4. Install the wall plate 14 using three lag bolts 15 and washers 17 . Tighten all lag bolts only until the washers are pulled firmly against the wall plate.

CAUTION: Improper use could reduce the holding power of the lag bolt. DO NOT over-tighten the lag bolts .

3 4

16

14

15

17

13

STEP 3 Hang TV onto Wall Plate

HEAVY! You may need assistance with this step.

1. Hook the TV brackets 01 and 02 onto the wall plate 14 .

2. Rest the TV into place against the wall.

3. The brackets click and lock the TV in place.

02 01

14

1 2 3

14

Manage Cables

1. Pull down and hold both release cords while gently pulling the bottom of the TV away from the wall until the kick stands fall into place.

CAUTION: To prevent breaking the locking latch: always pull and hold the release cords down while pulling the TV away from the wall.

2. Temporarily rest the TV on the kick stands while assembling the cables on the TV.

CAUTION: TV is not secured to the wall when it is in the kick stand position. Assistance is recommended for this step.

3. Lift the kick stands up while holding the TV.

4. Gently rest the TV back until the brackets click and lock the TV in place.

1 2 3 4

Kick Stands

Release Cords

15

TV Adjustments

TILT ADJUSTMENT

Your TV should adjust easily when moved, then stay in place.

If your TV is too loose or too tight, adjust the tension knobs using hex key 18 .

NOTE:

Once your TV is in place, tighten the tension knobs to prevent unwanted movement.

LEVEL ADJUSTMENT

To level your TV, turn the level adjustment screw on the top of either bracket using hex key 18 to raise or lower that respective side of the TV.

Loosen

Level Adjustment Screw

18

Raise

Lower Tighten

Tension Knob

18

16

TV LATERAL SHIFT

Slide the TV left or right along the wall plate 14 to reposition.

REMOVING THE TV

To remove your TV from the wall plate 14 .

Disconnect all cables and then follow the procedures on PAGE 15 to pull the release cords and pull bottom of TV from wall, then lift

TV off the wall plate to remove.

To reattach, follow the procedures in STEP 3 on PAGE 14.

14

14

17

ESPAÑOL

INSTRUCCIONES DE SEGURIDAD IMPORTANTES. CONSÉRVELAS. LEA TODO EL MANUAL ANTES DE UTILIZAR ESTE PRODUCTO.

1

2

Antes de comenzar, verifiquemos que este soporte sea perfecto para usted.

¿Su televisor pesa más de 56 kg (125 lb), incluidos los accesorios?

(56 kg)

125 libras

No — ¡Perfecto!

Sí — Este soporte NO es compatible. Visite MountFinder.Sanus.com o llame al 1-800-359-5520 (Reino Unido: 0800-056-2853) para encontrar un soporte compatible.

¿De qué está hecha su pared?

Tabiques de yeso con montantes de madera

Hormigón sólido o bloques de cemento

?

¿No está seguro?

¡Perfecto!

¡Perfecto!

Llame al 1-800-359-5520 (Reino Unido: 0800-056-2853)

3 ¿Tiene todas las herramientas necesarias?

5,5 mm

(7/32'')

10 mm

(3/8'')

13 mm

(1/2'')

18

4 ¿Listo para comenzar?

Lea estas instrucciones en su totalidad para estar seguro de sentirse cómodo con este fácil proceso de instalación. Consulte también el manual del usuario de su televisor para ver si existe algún requisito especial para instalar su televisor en la pared.

Si no entiende las instrucciones o si tiene dudas acerca de la seguridad de la instalación, del ensamblado o del uso del producto, póngase en contacto con el servicio de atención al cliente al 1-800-359-5520 (Reino Unido: 0800-056-2853).

Descripción

Placas de sujeción diseñadas para adecuarse a televisores con patrones de orificios de 200 x 200 mm hasta 750 x 400 mm.

Las placas de sujeción se mueven de lado a lado dentro de la placa mural para un posicionamiento óptimo.

Los pies de apoyo mantienen al televisor separado de la pared para crear espacio para adjuntar cables.

El televisor se inclina para lograr el ángulo de visualización perfecto.

Los ajustes del nivel crean una instalación sencilla.

Las perillas de ajuste permiten el ajuste manual o limitar el movimiento.

ESPAÑOL

VER PÁGINA 3

Dimensiones

VER PÁGINAS 4-5

Piezas y accesorios suministrados

VER PÁGINAS 6-7

ADVERTENCIA: Este producto contiene piezas pequeñas que, si fuesen tragadas, podrían producir asfixia.

Antes de iniciar el ensamblaje, compruebe que todas las piezas estén incluidas y en buenas condiciones. Si faltan piezas o alguna está dañada, no devuelva el artículo al distribuidor; póngase en contacto con el servicio de atención al cliente. Nunca utilice piezas deterioradas.

NOTA: No todos los accesorios incluidos deberán utilizarse.

19

ESPAÑOL

PASO 1 Colocar las placas de sujeción en el televisor

1-1 Seleccione el diámetro de los tornillos para el televisor

VER PÁGINA 8

Enrosque manualmente los tornillos en los encastres roscados del dorso del televisor a fin de determinar qué diámetro de tornillos

( M4, M6 o M8 ) utilizar.

1-2 Seleccione la longitud de los tornillos para el televisor

VER PÁGINA 8

Si el dorso del televisor es plano, utilice los tornillos cortos. Los espaciadores y los tornillos largos se proporcionan para:

● los televisores con dorso irregular / redondeado

● los televisores con orificios de montaje intercalados

● dejar un espacio adicional para cables

PRECAUCIÓN: Verifique que el tornillo o la combinación de tornillo y espaciador enrosquen correctamente.

Si el tornillo es demasiado corto no sostendrá el televisor. Si es demasiado largo dañará el televisor.

1-3 Acople las placas de sujeción del televisor

VER PÁGINA 9

Centre las placas de sujeción 01 y 02 sobre el patrón de orificios del televisor como lo indica la ilustración, asegurándose de que las placas estén niveladas.

Instale las placas de sujeción usando ya sea la combinación de tornillo corto y arandela o espaciador, o tornillo largo y arandela, que haya seleccionado para su televisor.

PASO 2 Fijar la placa mural - Opción para montantes de madera

20

PRECAUCIÓN: Evite lesiones personales y daños materiales.

● El yeso que recubre la pared no debe exceder los 16 mm (5/8'').

● Tamaño mínimo del montante de madera: común 51 mm x 102 mm (2'' x 4'') nominal 38 mm x 89 mm (1 1/2'' x 3 1/2'').

● Espacio horizontal mínimo entre los elementos de sujeción: 406 mm (16'').

VER PÁGINAS 10-11

ESPAÑOL

PASO 2 Fijar la placa mural -

Opción para montantes de madera (continuación)

1. Localice los montantes. Verifique el centro de los montantes con un punzón o un clavo delgado, o bien utilice un detector de bordes de montantes.

2. Nivele la placa mural 14 y marque la ubicación de los orificios en el centro de los montantes.

NOTA:

Si necesita ayuda para determinar la ubicación de la placa mural, utilice la herramienta HeightFinder disponible en sanus.com.

3. Retire la placa mural 14 y realice los orificios guía.

IMPORTANTE : Asegúrese de perforar el centro del montante.

IMPORTANTE : Los orificios deben realizarse con una mecha de 5,5 mm (7/32'') de diámetro hasta una profundidad de 75 mm (3'').

4. Instale la placa mural 14 usando tornillos tirafondo 15 y arandelas

17

. Ajuste los tornillos tirafondo solamente hasta que las arandelas queden firmes contra la placa mural.

PRECAUCIÓN: El uso indebido podría reducir la capacidad de retención de los tornillos tirafondo. NO ajuste en exceso los tornillos tirafondo .

PASO 2 Fijar la placa mural - Opción para hormigón sólido o bloques de cemento

VER PÁGINAS 12-13

PRECAUCIÓN: Evite lesiones personales y daños materiales.

● Instale la placa mural directamente sobre la superficie de hormigón.

● Espesor mínimo del hormigón: 203 mm (8'')

● Tamaño mínimo del bloque de cemento: 203 x 203 x 406 mm (8'' x 8'' x 16'')

● Espacio horizontal mínimo entre los elementos de sujeción: 203 mm (8'')

1. Nivele la placa mural 14 y marque la ubicación de los tres orificios.

NOTA:

Si necesita ayuda para determinar la ubicación de la placa mural, utilice la herramienta HeightFinder disponible en sanus.com.

21

ESPAÑOL

PASO 2 Fijar la placa mural -

Opción para hormigón sólido o bloques de cemento (continuación)

2. Retire la placa mural 14 y realice los orificios guía en el hormigón. Nunca perfore el cemento que une los bloques.

IMPORTANTE: Los orificios guía deben realizarse con una mecha de 10 mm (3/8'') de diámetro hasta una profundidad de 75 mm (3'').

3. Introduzca los anclajes para cemento 16 .

PRECAUCIÓN: Cerciórese de que los anclajes queden nivelados respecto de la superficie de hormigón.

4. Instale la placa mural 14 usando tres tornillos tirafondo 15 y arandelas

17

. Ajuste los tornillos tirafondo solamente hasta que las arandelas queden firmes contra la placa mural.

PRECAUCIÓN: El uso indebido podría reducir la capacidad de retención de los tornillos tirafondo. NO ajuste en exceso los tornillos tirafondo .

PASO 3 Colgar el televisor en la placa mural

¡ELEMENTO PESADO! Es posible que necesite ayuda en este paso.

22

1. Enganche las placas de sujeción 01 y 02 en la placa mural 14 .

2. Apoye el televisor contra la pared.

3. Las placas de sujeción emitirán un chasquido y fijarán al televisor en su lugar.

VER PÁGINA 14

ESPAÑOL

Organizar los cables

VER PÁGINA 15

1. Jale hacia abajo y sostenga ambos cordones de desenganche mientras tira con cuidado de la parte inferior del televisor para separarlo de la pared hasta que los pies de apoyo se ubiquen en su lugar.

PRECAUCIÓN: Para que el pasador de seguridad no se rompa, siempre jale y sostenga los cordones de desenganche mientras retira el televisor de la pared.

2. Apoye temporalmente el televisor sobre los pies de apoyo mientras instala los cables en el televisor.

PRECAUCIÓN: El televisor no está fijo en la pared cuando se encuentra en la posición de los pies de apoyo. Para este paso, se recomienda que procure asistencia.

3. Levante los pies de apoyo mientras sostiene el televisor.

4. Con cuidado, apoye el dorso del televisor hasta que las placas de sujeción emitan un chasquido y fijen al televisor en su lugar.

Ajustes del televisor

VER PÁGINAS 16-17

AJUSTE DE LA INCLINACIÓN

El televisor debe acomodarse fácilmente al moverlo, y luego quedar en su lugar. Si el televisor está demasiado suelto o demasiado ajustado, ajuste las perillas de tensión usando la llave hexagonal

18

.

NOTA:

Una vez que el televisor esté en su lugar, ajuste las perillas de tensión para evitar un movimiento indeseado.

AJUSTE DEL NIVEL

Para nivelar el televisor, gire el tornillo de ajuste de nivel que se encuentra en la parte superior de cualquiera de las placas de sujeción usando la llave hexagonal 18 para subir o bajar el lado correspondiente del televisor.

DESPLAZAMIENTO LATERAL DEL TELEVISOR

Deslice el televisor a la derecha o a la izquierda a lo largo de la placa mural 14 para reposicionarlo.

EXTRACCIÓN DEL TELEVISOR

Para retirar el televisor en la placa mural 14 . Desconecte todos los cables y siga el procedimiento que se describe en la PÁGINA 15 para jalar de los cordones de desenganche y separar la parte inferior del televisor de la pared, y luego retire el televisor de la placa mural.

Para volver a colocar el televisor, siga el procedimiento del PASO 3 en la PÁGINA 14 .

23

Thank you for choosing Sanus! Please take a moment to let us know how we did:

Call us: 1-800-359-5520

UK: 0800 056 2853

Email us: [email protected]

Leave a review: sanus.com

Milestone makes no claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind.

Milestone makes no representation of warranty, expressed or implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy,

©2013 Milestone AV Technologies, a Duchossois Group Company. All rights reserved. Sanus is a division of Milestone.

All other brand names or marks are used for identifi cation purposes and are trademarks of their respective owners.

SANUS • 6436 City West Parkway • Eden Prairie, MN 55344 USA

6901-002281 00

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement