21
1208
SECTION
21
WINDSHIELDS
1701-1001
TOURING
1701-1003
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
MOTORCYCLE
COVERS
•Made of durable
300 x 300 black
urethane-coated
polyester fabric;
all seams are double
stitched for
added strength
•Standard covers feature a plush fabric liner over the handlebar area for added protection to mirrors, fairings and windshields
•Chopper covers are lined down the center for added paint protection
•All covers are vented with a small signature Drag Specialties logo on the vent flap
•Heat-resistant lower panels for protection from exhaust
•Elasticized bottom perimeter for a snug fit and lower grommets in the cover for additional security (chopper covers also have adjustable side tethers
to ensure a snug fit)
•Cover is marked at rear for ease of installation
•Includes a 11” x 19” bag for storage
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
PART #
DESCRIPTION
SUG. RETAIL
1701-1001
Chopper cover for custom high neck models
1701-1003
Large cover for Softail, Dyna and custom
w/ extended forks and no sissy bar (up to
models (w/o high neck frame)
$94.95
111” wheelbase)
$109.95
1701-1004
Extra-large cover for Dresser models
1701-1002
Medium cover for XL and Buell models
89.95
(w/ or w/o Tour Pak)
109.95
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
MC903M
CABLES
MC902M
BRAKES
TANKS &
OIL FILTERS
MC904M
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
MC902/3/4 DELUXE ALL-SEASON COVERS
•Made from water-resistant, UV-treated Tri-Max® polyester
•Air ventilators to prevent condensation and heat shield lower panels
•Four oversized grommets with bungees at front wheel and middle of bike for security
•Soft windshield liner and fully elasticized hem for a snug fit
•Packed into its own attractive carryall
•Available in navy/silver, burgundy/silver and black/silver
•Sizes to fit every model; sizes M, L, XL and XXL
•Not intended for trailering
PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
SUG. RETAIL
NAVY/SILVER - MC-902
BURGUNDY/SILVER - MC-903
MC902M
Medium
$49.95 MC903M
Medium
$49.95
MC902L
Large
52.95 MC903L
Large
52.95
MC902XL
X-large
55.95 MC903XL
X-large
55.95
MC902XXL
XX-large
59.95 MC903XXL
XX-large
59.95
TIRES,
TUBES &
WHEELS
PART #
DESCRIPTION
BLACK/SILVER - MC-904
MC904M
Medium
MC904L
Large
MC904XL
X-large
MC904XXL
XX-large
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$49.95
52.95
55.95
59.95
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1209
SECTION
21
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
•Guaranteed 100% waterproof
•Made from full-strength UV-treated
Tri-Max® polyester
•Double-stitched, electronically heat-sealed
seams and heat shield lower panels
•Perma-Venting® system prevents
condensation buildup
•Soft windshield panel protector
•Snug-fitting elasticized bottom with 1”
grommets at center and front wheel
•Packed in its own tough backpack
•Available in black/silver 2000 and gray/silver 3000
•Available in M, L, XL and XXL
PART #
BLACK/SILVER 2000
D2-500
D2-750
D2-1000
D2-1500
DESCRIPTION
SUG. RETAIL
Medium
Large
X-large
XX-large
$94.95
99.95
109.95
119.95
D4-200
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
4001-0093
D2-1000
DEFENDER® 2000 AND 3000
PART #
GRAY/SILVER 3000
4001-0093
4001-0094
4001-0095
4001-0096
DESCRIPTION
SUG. RETAIL
Medium
Large
X-large
XX-large
$94.95
99.95
109.95
119.95
D5-200
DEFENDER®
400, 500
AND 600
•The Defender®
is guaranteed
100% waterproof
•Made from a
lighter-weight,
top-quality,
UV-treated
Tri-Max® polyester
•The exclusive UVEX™ process blocks out harmful UV rays that are the leading cause
of color fading
•Double-stitched, electronically heat-sealed seams and heat shield lower panels
•Soft windshield panel protector
•Perma-Venting® system prevents condensation build-up and allows constant air circulation
•Snug elastic bottom with 1” grommets at center and front wheel
•Packed into its own tough zipper storage bag with handle
•Available in black/silver 400, gray/silver 500 and navy/silver 600
PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
SUG. RETAIL
BLACK/SILVER 400
GRAY/SILVER 500
D4-200
Medium
$84.95 D5-200
Medium
$84.95
D4-300
Large
89.95 D5-300
Large
89.95
D4-400
X-large
94.95 D5-400
X-large
94.95
D4-500
XX-large
99.95 D5-500
X-large
99.95
PART #
DESCRIPTION
NAVY/SILVER 600
D6-200
Medium
D6-300
Large
D6-400
X-large
D6-500
XX-large
FC-628
UV2000 1/2 COVER
D6-200
SUG. RETAIL
$84.95
89.95
94.95
99.95
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
HARDWARE,
CHEMICALS
& TOOLS
•Guaranteed 100% waterproof
•Made from a medium weight top-quality,
UV-treated Tri-Max® polyester
•Double-stitched, electronically heat-sealed
seams and heat shield lower panels
•Soft windshield panel protector
•Perma-Venting® system prevents condensation
build-up and allows constant air circulation
•Snug-fitting elasticized bottom with 1”
grommets at center and front wheel
•Packed into its own tough backpack
•Available in black/silver; sizes M, L and XL
•Not intended for trailering
COVERS,
SECURITY
& GENERAL
PART #
FC628M
FC628L
FC628XL
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
1210
DESCRIPTION
Medium
Large
X-large
SUG. RETAIL
$79.95
84.95
89.95
FC-428
•Made from a lighter weight, top quality,
UV-treated Tri-Max® polyester
•Water-resistant
•Heat shield lower panels
•Soft windshield panel protector
•Air ventilators to prevent condensation
•Snug-fitting elasticized bottom with 1”
grommets at center and front wheel
•Packed into its own attractive carryall
•Fits most Harleys
•Available in black/silver; sizes M, L and XL
•Not intended for trailering
PART #
DESCRIPTION
SUG. RETAIL
FC428M
Medium
$54.95
FC428L
Large
59.95
FC428XL
X-large
64.95
•Specially treated UV protector nylon
•Blocks out over 97% of sun’s harmful rays
•100% waterproof and protects against all
natural elements
•Seams are four-folded, stitched and electrically
heat-sealed
•Shock cord allows for snug fit on all shapes
•Sewn-in elastic bungees
•Comes in its own fanny pack
•When folded, fits into almost any
storage compartment
•Not intended for trailering
•Sizes M, L and XL to fit every bike
PART #
DESCRIPTION
SUG. RETAIL
UV2000M
Medium
$42.95
UV2000L
Large
49.95
UV2000XL
X-large
54.95
All part numbers in BOLD MAGENTA are new for 2009.
SECTION
21
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
DC-500 DUST COVER
•Protect your bike from dust and spills when garaged
•Soft, non-scratch brushed poly/cotton
•Folds to fit in small compartment or saddlebag for storage
•Includes convenient carry bag
•Available in light blue
PART #
DESCRIPTION
DC500LG
Large
DC500XL
X-large
DC500XX
XX-large
EXHAUST
TRK-350D TRIKE DUST COVER
SUG. RETAIL
$39.95
49.95
59.95
•Protect your trike from dust and spills when garaged
•Made from a breathable soft non-scratch brushed poly/cotton
•One size fits most
PART #
4001-0010
DESCRIPTION
TRK-350D trike cover
FUEL/AIR
SYSTEMS
SUG. RETAIL
$59.95
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
POCKET TRAVEL COVER
TRK-350 TRIKE COVER
•Made from water-resistant superlight-weight Tri-Max®
Ripstop® nylon
•Snug elastic with 1” grommets at center and front wheel
•Packs tightly into its own matching carryall
•Available in black
•Sizes to fit every model
PART #
SIZE
SUG. RETAIL
4001-0067
Medium
$44.95
4001-0068
Large
47.95
4001-0069
X-large
49.95
4001-0070
XX-large
54.95
•Made of medium-weight Tri-Max®
polyester, this is the only trike cover
guaranteed to be 100% waterproof
•Double-stitched, electronically heat-sealed seams
•Heat shield lower panels; soft windshield protector
•Exclusive Perma-Venting® system prevents condensation buildup by allowing
constant air circulation
•50” rear zipper gives access to trunk without cover removal
•Snug-fitting, elasticized bottom has 1” grommets in center and at front wheel
•Folds into its own carryall
PART #
DESCRIPTION
SUG. RETAIL
•Available in black;
TRK-350
Trike cover
$129.95
one size fits all
MC900S
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
MC-900/MC-901
ECONO COVERS
•Guaranteed to be 100% waterproof
•Made from ripstop-designed soft PVC
•Front, middle and rear grommets for
safety tie-downs
•Fully ventilated using the exclusive
Cool-Vent system
•Sized to fit every bike and scooter
•Not intended for trailering
•Available in S, M, L, XL or XXL; choose
from graphite black or sonic gray
PART #
DESCRIPTION SUG. RETAIL
GRAPHITE BLACK - MC-900
MC900S
Small
$24.95
MC900M
Medium
27.95
MC900L
Large
27.95
MC900XL
X-large
29.95
MC900XXL
XX-large
34.95
HANDLEBARS,
CONTROLS
& MIRRORS
MC901S
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
PART #
DESCRIPTION
SONIC GRAY - MC-901
MC901S
Small
MC901M
Medium
MC901L
Large
MC901XL
X-large
MC901XXL
XX-large
SUG. RETAIL
$24.95
27.95
27.95
29.95
34.95
All part numbers in BOLD MAGENTA are new for 2009.
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1211
SECTION
21
WINDSHIELDS
TOURING
GUARDIAN® EZ ZIP
MOTORCYCLE COVER
LUGGAGE
•Eliminates hassles associated with putting
a cover on a bike or removing it
•A zipper located at the rear of the cover makes
installation and removal fast, easy and convenient
•Constructed of heavy-duty polyester material for
long-lasting durability
•ClimaShield™ Plus fabric coatings ensure
water repellency and UV stability and retard the
growth of mildew
•Exclusive Moisture-Guard™ venting system
prevents the accumulation of unwanted moisture
under the cover
•Scorch-resistant aluminized heat shield panel allows
the cover to be put on the bike before the
pipes have cooled
•Unique locking grommets facilitate the use
of a cable lock to secure your motorcycle
•Elastic cord sewn into the hem of the cover ensures
a snug fit
•Special soft cover liner in the area of the motorcycle
windshield protects against possible scratching
•EZ On and EZ Off zipper makes installation and
removal of the cover hassle-free
•Includes convenient storage bag
PART #
DESCRIPTION
SUG. RETAIL
50020-00
X-large
$123.95
50021-00
XX-large
129.95
50022-00
XXX-large
133.95
50020-00
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
4001-0050
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1212
IMPROVED GUARDIAN® WEATHERALL™
PLUS MOTORCYCLE COVERS
GUARDIAN®
SECURE ALARM
•Features four built-in alarm sleeves so you can make
your bike more secure by adding Secure
Alarm Systems to your cover
•Alarms sold separately
•Fabricated from heavy polyester with waterproof undercoating and Moisture-Guard™
ventilation system
•Reinforced grommets for cable or bar locks and elastic bottom rim for snug fit
•Black with silver side panels; storage bag included
PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
SUG. RETAIL
4001-0054
Medium
$84.95 4001-0052
XX-large
$115.95
4001-0050
Large
94.95 4001-0053
XXX-large
126.95
4001-0051
X-large
105.95 4001-0055
Sportbike
99.95
•Added security for the Weatherall™ Plus cover
•Pin-pull alarm emits an
ultraloud 130dB tone when activated by
unauthorized movement of the cover
•Battery-powered alarm (battery not included)
requires no special wiring and installs
in minutes
•For all Guardian® Weatherall covers with
sewn-in alarm sleeves
SUG.
PART #
DESCRIPTION
RETAIL
4020-0030 Secure motorcycle alarm
$20.95
GUARDIAN® CUSTOM BIKE
INDOOR COVER
4001-0005
•Specially designed to fit your custom bike
•Constructed of breathable cotton with a napped
interior to provide protection from scratches
•Sewn-in shock cord on bottom hem ensures a snug fit
•Reinforced grommets allow the use of a cable lock; cable lock
not included
PART #
DESCRIPTION
SUG. RETAIL
4001-0005
For choppers up to 109”
$109.95
4001-0006
For intermediate choppers up to 96”
109.95
4001-0059
For choppers up to 124”
123.95
All part numbers in BOLD MAGENTA are new for 2009.
SECTION
21
WINDSHIELDS
GUARDIAN®
WEATHERALL
PX-200
•Water-repellent urethanecoated polyester material
with aluminized panels to
cover hot engine and exhaust pipes
•Flannel panel protects windshield from scratches
(large, X-large and XX-large only)
•Reinforced grommets for cable or bar locks and elastic bottom
rim for snug fit
•Five sizes fit all motorcycles
PART #
DESCRIPTION
SUG. RETAIL
PX-50
Medium, sport/custom
$76.95
PX-100
Large, full-dress
81.95
PX-125
X-large, small touring/full-dress
86.95
PX-150
XX-large, large touring/full-dress
91.95
PX-200
XXX-large, large touring
97.95
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
50008-00
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
50034-00
GUARDIAN® STORE AWAY
GUARDIAN DUSTER
•Store your prized
motorcycle inside and
keep dirt and dust off
•Ideal for indoor storage
•Designed to keep the bike
clean at an affordable price
•Constructed of a soft cotton material that won’t scratch or harm the
finish of the motorcycle
•Natural cotton materials are breathable to let potentially harmful
moisture escape from inside the cover
•Elastic cord sewn into the hem of the cover ensures a snug fit
•Unique locking grommets facilitate the use of a cable lock to secure
your motorcycle
PART #
DESCRIPTION
SUG. RETAIL
50034-00
Medium, sport/custom
$69.95
50035-00
Large, full-dress
73.95
50036-00
XX-large
84.95
•An inexpensive indoor storage cover that’s intended
to replace that old sheet, blanket or tarp
•A universal-fit cover that will protect the motorcycle
from dust and dirt while it is being stored in a garage
•Made of soft material to prevent scratching of the
motorcycle’s finish
•Breathable fabric to prevent the accumulation of moisture inside
of the cover
•Two sizes to fit most all motorcycles, including the largest
touring models
PART #
DESCRIPTION
SUG. RETAIL
50012-00
L, small touring models
$35.95
50008-00
X-large, full-dress models
41.95
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
50037-00
4001-0056
GUARDIAN® ULTRALITE™ PLUS
MOTORCYCLE COVER
PVC MOTORCYCLE COVER
•Basic motorcycle cover constructed of heavy-duty PVC
plastic to protect the motorcycle from the elements
•100% PVC construction means a cover that
is 100% waterproof
•Includes grommets in the hem to allow for the use
of a motorcycle locking device
•Two sizes to fit most motorcycles
PART #
DESCRIPTION
50037-00
Large, full-dress
50038-00
X-large, small touring/full-dress
SUG. RETAIL
$23.95
25.95
•Small, compact design is ideal for longer rides; stores
easily anywhere
•Lightweight rip-stop polyester fabric construction
for enhanced tear and abrasion resistance
•Combined UV and water-repellent coating provides protection from dirt,
pollution and harsh sunlight; two vent flaps expell moisture
•Sewn-in storage bag on the cover’s interior is a place for storing gloves,
sunglasses and other small items
•Features full-perimeter elastic on bottom, underbelly straps for a secure
fit, soft interior lining to protect windshields and lockable grommets for
added security
SUG.
PART #
DESCRIPTION
RETAIL
4001-0056 Medium, sport bikes, small cruisers w/o windshields
$49.95
4001-0057 Large, cruisers, touring/sport touring
51.95
4001-0058 X-large, large touring
55.95
All part numbers in BOLD MAGENTA are new for 2009.
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1213
SECTION
21
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
4001-0024
LEG-02
FUEL/AIR
SYSTEMS
GUARDIAN®
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
4001-0032
ELECTRICAL
ULTRA LITE
•Lightweight polyester material is waterproof to protect your bike from moisture
•Reinforced grommets for cable or bar locks and elastic bottom rim for snug fit
•Storage bag included
•Three sizes provide great protection for most motorcycles
PART #
DESCRIPTION
SUG. RETAIL
BLUE/SILVER
4001-0023 Medium, sport bikes/small cruisers w/o windshields
$35.95
4001-0024 Large, sport bikes/small cruisers w/o windshields
39.95
4001-0025 X-large, cruisers/touring
41.95
YELLOW/SILVER
4001-0032 Large, sport bikes/small cruisers w/o windshields
39.95
4001-0033 X-large, cruisers/touring
41.95
GRAY/SILVER
LEG-01
Medium, sport bikes/small cruisers w/o windshields
35.95
4001-0034 Large, cruisers/touring
39.95
LEG-02
X-large, small touring/full-dress
41.95
LEG03
X-large, dressers
41.95
LIGHTING
3515-0067
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1214
GUARDIAN®
WEATHERALL™
PLUS COVERS
3515-0068
•Fabricated from
heavy polyester with
waterproof undercoating
and Moisture-Guard™
ventilation system
•Reinforced grommets for
cable or bar locks and elastic
bottom rim for snug fit
•Excellent for all-weather
G-175
protection or inside storage
•Protects windshield with a layer of scratch-resistant lining
bonded to the inside of the cover
•Two sizes fit motorcycles listed (G-175 fits conversions from Lehman, Motor Trike,
Trike Shop and most others)
PART #
4001-0003
G-175
GUARDIAN® COVER
COMPRESSION TOOL
SUG.
DESCRIPTION
RETAIL
Angled front, small to medium cruisers w/ windshield, sissy bar and saddlebags $94.95
Trike cover
103.95
•Available in two sizes to compress any bike
cover to its true packed potential
•Made from tough, lightweight nylon
•Uses four cinch straps and two compression
pockets to squeeze cover to minimum size
•Small measures 15” x 5”; 6.7” x 5” compressed
•Large measures 23” x 7.5”;
11” x 7.5” compressed
PART #
DESCRIPTION
SUG. RETAIL
3515-0067
Small
$20.95
3515-0068
Large
23.95
DOWCO COVER APPLICATIONS
FITS MODEL
BUELL
All models
EXCELSIOR-HENDERSON
Super-X
HARLEY-DAVIDSON
All Sportsters
Dyna Super Glide T-Sport
FXDS Dyna Convertible
FXDX Dyna Super Glide Sport
FLSTF Fat Boy
FLHR Electra Glide
FLHS Electra Glide Sport
FLHT Electra Glide Standard
FLHTC Electra Glide Classic
FLHTC Ultra Classic Electra Glide
SIZE
M
L
M
LG
LG
M
LG
XL
XL
XL
XL
XL
FITS MODEL
HARLEY-DAVIDSON (CONT)
FLSTC Heritage Softail Classic
FLSTN Heritage Softail Special
FLTC Ultra Classic Tour Glide
FXD Dyna Super Glide
FXDB Dyna Daytona
FXDC Dyna Glide
FXDL Dyna Low Rider
FXDS Dyna Convertible
FXDWG Dyna Wide Glide
FXR Low Rider/FXR Super Glide
FXRS Super Glide II
FXRT Sport Glide
FXST Softail
FXSTS Springer Softail
SIZE
XL
LG
XL
M
M
M
M
XL
LG
M
M
LG
M
M
FITS MODEL
HARLEY-DAVIDSON (CONT)
FXSTSB Bad Boy
FLSTS Heritage Springer
FXSTB Night Train
FLTR Road Glide
FLHR Road King/Classic
FXSTD Softail Deuce
VRSCA V-Rod
INDIAN
Scout, Spirit
Chief w/o windshield
Chief w/ windshield
Chief Roadmaster
All part numbers in BOLD MAGENTA are new for 2009.
SIZE
LG
LG
LG
XL
XL
LG
M
L
L
XL
XL
SECTION
21
WINDSHIELDS
FORM-FIT
MOTORCYCLE
COVERS
4001-0097
PREMIUM MOTORCYCLE COVERS
•Heavy-duty 600-denier polyester construction
with polyurethane coating for UV-protection
and water-resistance
•Vent guard system allows cover to breathe, reducing moisture buildup
•Aluminum-coated heat shields allow cover to be used on hot pipes
•Windshield area is made of non-abrasive material to prevent scratching
•Elastic hems and web-tie down
•X-large features hook-and-loop slot in the rear for easy access to luggage
and accommodation of dual antennas
PART #
DESCRIPTION
SUG. RETAIL
4001-0097
Medium (up to 95”), for small cruisers and
400cc-600cc sportbikes
$69.95
4001-0098
Large (up to 100”), for cruisers, sport touring
and over 600cc sportbikes
69.95
4001-0099
X-large (up to 104”), for large touring
and large cruisers
73.95
TOURING
•Body-hugging
polyester knit
outer shell is made
with spandex to
provide stretch
and recovery
•Inside the shell
is 100% cotton
4001-0063
terry loop,
sheared to
a luxurious fleece
finish so it won’t mar painted or finished surfaces
•Follow every curve of your bike for a truly custom fit
•For indoor use only
•Available in black
PART #
DESCRIPTION
4001-0062 For choppers and custom bikes up to 10’ long
w/ backrest and/or sissy bar
4001-0063 For choppers and custom bikes up to 10’ long
w/o backrest or sissy bar
4001-0064 For full-dress touring bikes w/ windshield,
saddlebags, backrest/sissy bar and travel case
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
SUG. RETAIL
$232.95
220.95
FUEL/AIR
SYSTEMS
ENGINE
258.95
TRANSMISSION
& DRIVELINE
READY-FIT
MOTORCYCLE COVERS
XM-100
GASKETS
& SEALS
•Covers give a custom tailored fit,
excellent protection and have
a rich, deep color that resists fading
•Waterproof, dustproof urethanecoated polyester fabrics reflect heat
and protect from the sun, dust,
bird and tree droppings, industrial
pollutants and even salt air
•Heat-shield aluminized inner lining
protects cover from hot pipes
and engine
•Windshields and rear fenders are protected from scratches by a soft fabric inner lining
•Screened air vent lets condensation and heat escape to further protect bike
•Overlapped, double-stitched seams for strength and water resistance
•Cover tucks into sewn-in bag for easy storage and transportation
•Theft-resistant, hardened-steel cable reinforced grommets
•Elastic in front and rear hems to hold cover in place
•Great packaging with features and benefits right on the box
PART #
DESCRIPTION
XM-100
FLHTC, FLHTCU, FLTC, FLTCU
XM-101X
FLSTN, FXDS, FXRT, FXRS-Conv.
XM-104X
XL, XLCH, XLCHA, XLH, XLS, XLSA
PART #
CABLE AND LOCK FOR COVERCRAFT® COVERS
ZCML
ELECTRICAL
XM-101X
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
ZCML
SUG. RETAIL
$110.95
103.95
86.95
DESCRIPTION
CABLES
BRAKES
SUG. RETAIL
30” security cable and lock
$8.95
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
4001-0091
FOOTRESTS
& LICENSE
PLATE FRAMES
4001-0092
TIRES,
TUBES &
WHEELS
4001-0089
ULTRAGARD® CLASSIC II COVERS
4001-0090
•Water-resistant, lightweight, polyurethane-coated polyester construction
•UV stability prevents material breakdown and fading
•Scorch-resistant exhaust protection
•Elastic hem
•Flannel windshield protection
•Ultragard® vent system
•High-visibility logo and piping
PART #
DESCRIPTION
SUG. RETAIL
4001-0091
Charcoal/black, full dresser
$73.95
4001-0092
Red/black, full dresser
73.95
HALF COVER
•Compact motorcycle cover is ideal for traveling;
takes up far less storage space than full cover
•Covers seat, windshield, and front of bike
•Expandable windshield pocket
•Universal fit
PART #
DESCRIPTION
4001-0089
Black
4001-0090
Gray
All part numbers in BOLD MAGENTA are new for 2009.
HARDWARE,
CHEMICALS
& TOOLS
SUG. RETAIL
$37.95
37.95
COVERS,
SECURITY
& GENERAL
1215
SECTION
21
WINDSHIELDS
SEAT SHIELD
TOURING
LUGGAGE
SEATS &
SISSY BARS
•Universal sun shield protects your
seat from damaging UV rays
•Urethane-coated polyester reflects
the sun and heat
•Attaches to handlebars and turn
signals, rear rack or rear fender
•Adjustable shock cords for a
custom fit
•Packs away compactly so it is easy to carry along for daily use
PART #
DESCRIPTION
SUG. RETAIL
4001-0100
Seat shield
$38.95
GAS TANK PROTECTOR
•Mechanic’s apron for tanks
•Keeps gas tanks from getting
scratched or dinged while working
on bikes; also has convenient pouches
for holding tools, parts, etc.
•Soft, non-marring material makes
contact with tank; durable Naugahyde® outer material looks like leather
•Hook-and-loop straps hold it in place
PART #
DESCRIPTION
SUG. RETAIL
H50502BK
Gas tank protector
$26.95
3502-0043
DS-380293
DS-380292
EXHAUST
FUEL/AIR
SYSTEMS
1405-0006
ENGINE
DS-380294
TRANSMISSION
& DRIVELINE
GUARDIAN® PROTECTORS
DS-380295
DS-380296
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1216
SUG. RETAIL
$15.95
17.95
17.95
19.95
DS-380298
CYCLE SKYNS
•Made from 4mm protective wetsuit material
•Help prevent scratches when you are doing
repairs or transporting the motorcycle
•Mechanic’s set includes one each of the following:
5.2 gal. FXST tank cover with pockets, 3.2 gal. XL
tank cover with pockets, FLST, FLHT front fender
cover, FLSTF front fender cover, and FXST, FXD and XL front fender cover
•Saddlebag covers fit FLT hard bags
PART #
DESCRIPTION
SUG. RETAIL
DS-380292
5.2 gal. FXST tank cover w/ pockets
$120.95
DS-380285
5.2 gal. FXST tank cover w/o pocket
101.95
DS-380293
3.2 gal. XL tank cover w/ pockets
101.95
DS-380291
3.2 gal. XL tank cover w/o pocket
86.95
DS-380294
FLST, FLHT front fender cover
89.95
DS-380295
FLSTF front fender cover
86.95
DS-380296
FXST, FXD, XL front fender cover
71.95
DS-380297
Mechanic’s set (5-pc.)
348.95
DS-380298
Saddlebag covers (set)
186.95
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
•Tough, lightweight protectors that guard against
dents and scratches when the bike is being
worked on
•Padded for additional scratch protection
PART #
DESCRIPTION
FRONT FENDER PROTECTOR
1405-0006
Narrow fenders
1405-0007
Wide fenders
TANK PROTECTOR
3502-0043
Small cruisers
3502-0044
Large cruisers/touring
FENDER COVER
•Foam construction
•Protects paint and chrome
•Full-sized design wraps around large Dresser
front fenders
PART #
DESCRIPTION
SUG. RETAIL
3502-0125
Fender cover
$22.95
8000-7105
8000-7100
FOLDING ALUMINUM MOTORCYCLE RAMP
MOTORCYCLE LOADING RAMPS
•Heavy-duty steel ramps feature handy 72” L
and two widths
•950 lb. load capacity
PART #
DESCRIPTION
8000-7100
6” W
8000-7105
10” W
SUG. RETAIL
$89.95
119.95
•Folds to carry like a briefcase
•1,000-lb. capacity
•UPS shippable; only 25 lb.
•Never rusts; 100% aluminum
•Dimensions: 8’ L x 121/2” W (extended); 521/2” L x
121/2” W x 4” D (collapsed)
PART #
DESCRIPTION
MC1296
Folding ramp
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$209.95
SECTION
21
WINDSHIELDS
TOURING
CYCLE DOCK
•Avoid the back-breaking work of loading and
unloading bikes with the Cycle Dock
•Pivot mechanism uses the weight of the bike to
keep it upright for easy loading and unloading
on a trailer or pickup truck bed
•Rails mount to trailer deck or pickup bed,
which allows you to easily slide the dock and
your bike into position
•Can be completely removed when the space is
needed for other purposes
•Two rockers (wide and narrow), cradle stop
(upright), mounting plate, support arm (with
eyelets and adjustable feet) and two mounting
rails are included
•Heavy-duty stand provides long-lasting service
PART #
DESCRIPTION
36-0310
Cycle Dock kit
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
SUG. RETAIL
$278.95
FUEL/AIR
SYSTEMS
ENGINE
Step 1:
“Roll in”
Step 2:
“Step off;
bike stays
upright”
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
CYCLE JAWS®
•Stabilizes the front wheel of a motorcycle for
trailer transportation
•Easy one-person operation
•Maximum tire contact for maximum security;
adjusts to the exact size of the tire
•Effortless motorcycle removal, with no bulky
hardware to roll over
•No pinch points to wear and deform the
tire’s sidewalls
•Smooth, easy clamping motion on tire sizes
from 3” to 61/2” W
•Can quickly and easily be removed from the
truck or trailer; tie-downs recommended
•Adjustable tire locater prevents damage to
valuable rotors and rims
•Heavy-duty thick-wall yellow zinc-plated steel
construction so Cycle Jaws will withstand
the test of time
•Can be used free-standing for use on garage
floors, driveways and racetrack pits
•Made in the U.S.A.
LIGHTING
Step 3:
“Close the jaws”
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
WARNING: Do not ride motorcycle on ramp at
any time.
PART #
DESCRIPTION
4101-0059
Cycle Jaws
TANKS &
OIL FILTERS
SUG. RETAIL
$289.95
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
58” BOX BAR
•This combination tie-down/wheel-stabilizer bar bolts to the front of your
pickup box at any height to clear even the lowest fenders
•Prevents your front wheel from turning to the side and bending out the
front of your box when strapping down your bike
•Mounting hardware and instructions included
•For full-size pickups
•Sold each
PART #
DESCRIPTION
SUG. RETAIL
8000-1100
58” Box Bar
$84.95
All part numbers in BOLD MAGENTA are new for 2009.
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1217
SECTION
21
WINDSHIELDS
DS-390095
3911-0001
TOURING
3911-0001
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
REMOVABLE
WHEEL CHOCKS
•Stabilize the front wheel of
a motorcycle for trailer transportation
3911-0033
•Wheel chocks can easily be removed when not in use
•Chocks are made of thick-wall steel tube construction and feature a chrome finish
•61/2” wheel chock has clearance for motorcycles with large rotors and is designed with a three-bend
radius that will keep any width tire centered in the chocks
DS-380149
•Mounting brackets remain fastened while the chocks are easily removed by unscrewing the T-bolt
hold-down screw
SUG.
•Additional mounting kits may be purchased separately, enabling you
PART #
DESCRIPTION
RETAIL
to move the chock from one surface to another without removing
$68.95
DS-390095 31/2” – fits tire widths up to 31/2” (w/ mounting kit)
the mounting brackets
68.95
3911-0001 61/2” – fits tire widths up to 61/2” (w/ mounting kit)
•Wheel chock mounting brackets are patented
3911-0033 Mounting kit only w/ T-bolt and threaded insert (ea.)
27.95
•If it doesn’t say “Pingel®,” it isn’t the real thing
DS-380149 Repl. T-Bolt w/ threaded insert (ea.)
6.95
•Made in the U.S.A.
3920-0132
REMOVABLE WHEEL CHOCKS FOR SERIES E TRACK
•Stabilize the front wheel of a motorcycle for trailer transportation
•Chock fits securely into recessed or floor-mounted Series E Tracks
•Wheel chocks are made of thick-wall steel tube construction and
feature a chrome finish
•Lets you move your wheel chock and bike virtually anywhere along
the Series E Track for the best position to accommodate multiple
bikes, trikes or choppers, giving optimum space utilization
•61/2” wheel chock has clearance for motorcycles with large rotors
and is designed with a three-bend radius that will keep any width tire
centered in the chock
•Patented mounting bracket
•Tie-down fitting installs into Series E Track in seconds; moves along the
track for perfect tie-down angle
•If it doesn’t say “Pingel®,” it isn’t the real thing
•Made in the U.S.A.
3911-0008
PART #
3911-0006
3911-0007
3911-0008
3911-0009
3920-0132
DESCRIPTION
Floor mount for tire widths up to 31/2”
Recess mount for tire widths up to 31/2”
Floor mount for tire widths up to 61/2”
Recess mount for tire widths up to 61/2”
Tie-down fitting kit (ea.)
SUG. RETAIL
$158.95
158.95
158.95
158.95
15.95
BRAKES
3911-0003
TANKS &
OIL FILTERS
DS-380137
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
3911-0002
FOOTRESTS
& LICENSE PERMANENT WHEEL CHOCKS
PLATE FRAMES •Stabilize the front wheel of a motorcycle
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1218
REMOVABLE WHEEL CHOCKS
FOR CORRUGATED OR TRAILER FLOORS
for trailer transportation
•Chrome wheel chocks are designed to be fastened
down and stay in one place
•Available in two sizes to fit a large variety
of motorcycles
•61/2” chock has clearance for motorcycles with large
rotors and is designed with a three-bend radius that will
keep any width tire centered in the chock
•Made in the U.S.A.
SUG.
PART #
DESCRIPTION
RETAIL
$44.95
DS-380173 31/2” – fits tire widths up to 31/2”
3911-0002 61/2” – fits tire widths up to 61/2”
44.95
•Stabilize the front wheel of a motorcycle for trailer transportation
•Removable chock is made of thick-wall steel tube construction and has a chrome finish
•Unique mounting bracket is designed to use either the 31/2” or 61/2” Pingel® removable
wheel chock
•61/2” wheel chock has clearance for motorcycles with large rotors and is designed with
a three-bend radius that will keep any width tire centered in the chock
•Only the mounting bracket fastens to the trailer, truck or van
•Easy removal of the chock when not in use
•If it doesn’t say “Pingel®,” it isn’t the real thing
•Mounting brackets used with wheel chocks are patented
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
$115.95
DS-380136
31/2” – fits tire widths up to 31/2” (w/ mounting kit)
3911-0003
61/2” – fits tire widths up to 61/2” (w/ mounting kit)
115.95
DS-380137
Additional mounting plate kit for corrugated floors (ea.)
59.95
All part numbers in BOLD MAGENTA are new for 2009.
SECTION
CHOPPER WHEEL CHOCKS
21
WINDSHIELDS
•Capable of accommodating all Chopper
front wheel sizes and makes tying down a
motorcycle simple and easy for one person
•Available in two cradle choices: one for
the 120 wide tire and another for the
80-90 wide tire
•Patented locking mechanism effortlessly
and securely supports motorcycle in an
upright position
•Works on all low fender bikes
•Can be used on pavement, concrete,
dirt, sand, gravel and also trailers and
pickup trucks
•Mounted on a trailer it easily snaps on and off
(with included trailer adapter kit); in a pickup
truck, it may be used free standing
•Self locking and folds to become compact
•Weighs only 26 lb.
•Upright dimensions: 25” L x 9” W x 15” H;
folded dimensions: 25” L x 9” W x 6” H
Rear view
TOURING
4101-0138
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
4101-0139
PART #
4101-0138
4101-0139
DESCRIPTION
For 80-90 wide front tire
For 120 wide front tire
SUG. RETAIL
$314.95
314.95
FUEL/AIR
SYSTEMS
ENGINE
4101-0135
PIT STOP/TRAILER STOP
WHEEL CHOCK
•Fully adjustable wheel locking system; holds
bikes weighing up to 2,400 lb.
•Accommodates front or rear wheel sizes from
15”-22” and 80-220mm wide
•Patented locking mechanism effortlessly and
securely supports motorcycle in an upright position
on the ground or on a trailer
•Makes tying down the motorcycle for transport a simple task
•Works on pavement, gravel, concrete, dirt or even sand
•Use as a work stand or trailer chock
•Trailer adapter kit quickly and easily attaches to trailer or pickup beds
•Folds down for easy storage; weighs just 21 lb.
•Upright dimensions: 30” L x 29” W x 15” H; folded dimensions: 30” L x 29” W x 6” H
PART #
DESCRIPTION
4101-0135
Pit Stop/Trailer Stop
4101-0136
Trailer Stop adapter kit
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
4101-0136
SUG. RETAIL
$249.95
21.95
HANDLEBARS,
CONTROLS
& MIRRORS
TRAILER ONLY WHEEL CHOCK STAND
•Fully adjustable wheel locking system;
accommodates front and rear wheel sizes from
15”-22”/80-220mm wide
•Patented locking mechanism effortlessly and
securely supports motorcycle in an upright
position on all transport platforms
•As a trailer chock it easily snaps on and off all
transport platforms; attaching and detaching
the unit takes only a few seconds
•Makes tying down a motorcycle a simple and an easy
task for one person
4101-0137
•Accommodates bikes weighing up to 3,000 lb.;
folds down for easy storage and weighs just over 26 lb.
•Dimensions upright are 25” L x 9” W x 15” H; dimensions folded are 25” L x 9” W x 7” H
PART #
DESCRIPTION
4101-0137
Trailer only wheel chock stand
CABLES
BRAKES
TANKS &
OIL FILTERS
SUG. RETAIL
$184.95
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
SCOOTER WHEEL CHOCK
•Fully adjustable wheel locking system
•Works with front and rear tires on mopeds
and scooters; fits front tires only on most
sport bikes
•Patented locking mechanism securely supports
your ride in an upright position; works on all
trailers, trucks and transport platforms
•Floor adapter kit (sold separately) allows you
to use Scooter Wheel Chock in a garage, on
pavement, dirt, sand or gravel; can also be used
for transport in back of a minivan, SUV or truck
bed without the use of mounting hardware
•Accommodates bikes weighing up to 800 lb.,
folds down for easy storage and weighs
only 22 lb.
•Upright dimensions: 24” L x 8” W x 14” H; folded
dimensions: 24” L x 8” W x 6” H
PART #
4101-0140
4101-0141
LIGHTING
FOOTRESTS
& LICENSE
PLATE FRAMES
4101-0141
TIRES,
TUBES &
WHEELS
4101-0140
HARDWARE,
CHEMICALS
& TOOLS
DESCRIPTION
Scooter wheel chock
Floor adapter kit
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$154.95
89.95
COVERS,
SECURITY
& GENERAL
1219
SECTION
21
WINDSHIELDS
3911-0027
TOURING
LUGGAGE
3911-0030
SEATS &
SISSY BARS
3911-0023
LOCK CHOCK SEPARATES
EXHAUST
FUEL/AIR
SYSTEMS
•Prepare your trailer with T-bases and use the
right chock for the day’s haul
•All chocks are interchangeable on the same T-base plate
•Made in the U.S.A.
PART #
DESCRIPTION
3911-0028
3.5” Chock and security pin
3911-0029
5.5” Chock and security pin
3911-0030
6.5” Chock and security pin
3911-0027
T-base plate and mounting hardware
SUG. RETAIL
$49.95
64.95
64.95
34.95
ENGINE
TRANSMISSION
& DRIVELINE
3911-0024
3911-0025
LOCK CHOCKS
•Chock includes a security pin that can be used to lock your bike
to the chock (padlock not included)
•Flush-mount T-base fits all trailers and truck beds with no hassle
of aligning separate cleats
•Chock mounts to base at four points for strength and stability
•Ultra-durable powder-coat finish
•Large models fit street/supermoto machines and provide clearance
for all disc brakes
•All mounting hardware and instructions
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
3911-0023
3.5”
$74.95
3911-0024
5.5”
89.95
3911-0025
6.5”
89.95
3911-0035
3911-0026
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
EZ CHOCK
3911-0034
•Does not require any mounting hardware
•Non-slip rubber pad on the bottom plate
ensures the chock stays put
•Plate and tab strap design secures your bike
in place
•Sold each
PART #
DESCRIPTION
3911-0035
3.5” W
3911-0036
5.5” W
3911-0037
6.5” W
SUG. RETAIL
$89.95
99.95
99.95
•Patented lock ‘n load system uses high-strength
aircraft-style track for attachment to trailer
•Reinforced, powder-coated tubular steel; solid base plate and aircraft
fasteners provide superior strength
•Universal design works on both ribbed truck beds and flat floor trailers
•Fits wheel sizes from 31/2” W to 51/2” W
•Includes necessary hardware and instructions
•Accessory mounting kit allows chock to be used in more than one vehicle
PART #
DESCRIPTION
SUG. RETAIL
3911-0026
Track Star wheel chock
$82.95
3911-0034
Accessory mounting kit
15.95
CABLES
BRAKES
TANKS &
OIL FILTERS
TRACK STAR™ WHEEL CHOCK
3911-0015
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1220
3911-0014
CHROME WHEEL CHOCKS
•Designed to hold the front wheel
•Mount to the bed of any truck, van or trailer
•Chrome plated to look as good as they work
•PART #3911-0015 5” sport chock features a special bend to accommodate
disc brakes; this applies to Buells, etc.
•Quick mount and release kits allow for easy installation and removal
of wheel chocks; sold separately
•Chocks and quick mount/release kits sold each
PART #
DESCRIPTION
SUG. RETAIL
WHEEL CHOCKS
3911-0012
31/2”, fits tire widths up to 31/2”
$29.95
3911-0011
5”, fits tire widths up to 5”
29.95
3911-0015
5” sport, fits tire widths up to 5”
29.95
3911-0014
61/2”, fits tire widths up to 61/2”
29.95
QUICK MOUNT/RELEASE KITS
3911-0018
For 31/2” wide chocks
28.95
3911-0017
For 5” wide chocks
28.95
3911-0019
For 61/2” wide chocks
28.95
UNIVERSAL
CHOCK LOCK
•Ideal for motorcycles, trailers,
ATVs, snowmobiles, etc.
•Easy two-step installation: just push lock around
the wheel and slide lock tight
•Comes with three keys
PART #
DESCRIPTION
4010-0085
Universal chock lock
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$89.95
SECTION
3920-0087
21
WINDSHIELDS
3920-0086
3920-0089
3920-0088
3920-0090
3920-0091
TOURING
11/8” POWER CAT TIE-DOWNS
3920-0092
3920-0093
•1,200-lb. tensile strength nylon webbing
•Soft-end loops protect handlebars from scratches or scuffs
•S-hooks at both ends feature innovative safety-lock clips
that prevent the S-hook from falling off after clipped
•Zinc metal cam buckle provides an anti-slip connection
•Adjusts in length from 24” to 78”
3920-0124
•Sold in pairs
PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
3920-0086 Black/white checks
$29.95 3920-0091 Flame
3920-0087 Black/red checks
29.95 3920-0092 Black
3920-0088 Black/blue checks
29.95 3920-0093 Red
3920-0089 Black/green checks
29.95 3920-0124 Pink Floral
3920-0090 Black w/ orange stripe
29.95 3920-0125 Pink Camo
LUGGAGE
3920-0157
3920-0158
3920-0125
3920-0159
SUG. RETAIL
$29.95
29.95
29.95
29.95
29.95
PART #
3920-0157
3920-0158
3920-0159
DESCRIPTION
Sprockets
Chain
Skulls
SUG. RETAIL
$29.95
29.95
29.95
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
3920-0094
3920-0096
3920-0095
3920-0100
3920-0098
3920-0097
TRANSMISSION
& DRIVELINE
3920-0102
GASKETS
& SEALS
3920-0126
3920-0099
3920-0127
ELECTRICAL
3920-0161
3920-0162
3920-0160
RATSHET CAT TIE-DOWNS
LIGHTING
•Same features as the Power Cat, but with a ratchet buckle
•11/8” nylon webbing with 1,200-lb. tensile strength
•Soft-end loops protect handlebars from scratches or scrapes
•S-hooks at both ends feature innovative dual-locking clips that
prevent the S-hook from falling off after clipped
•Adjusts in length from 24” to 78”
•Sold in pairs
PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
3920-0094 Black/white checks
$39.95 3920-0099 Flame
3920-0095 Black/red checks
39.95 3920-0100 Black
3920-0096 Black/blue checks
39.95 3920-0102 Red
3920-0097 Black/green checks
39.95 3920-0126 Pink floral
3920-0098 Black w/ orange stripe
39.95 3920-0127 Pink camo
HANDLEBARS,
CONTROLS
& MIRRORS
SUG. RETAIL
$39.95
39.95
39.95
39.95
39.95
PART #
3920-0160
3920-0161
3920-0162
DESCRIPTION
Sprockets
Chain
Skulls
SUG. RETAIL
$39.95
39.95
39.95
CABLES
BRAKES
TANKS &
OIL FILTERS
CAT’S TAIL SLEEVES
BAD BUNGEE TIE-DOWN STRAP
•Soft berber fleece sleeve protects
chrome or painted finishes
•Designed for use with soft-end
tie-down straps
•Available in black only
•Sold in pairs
PART #
DESCRIPTION
3920-0117
Cat’s Tail Sleeve
•1” adjustable bungee tie-down firmly secures
accessories and riding equipment
•Easy to use
•Adjusts in length from 18” to 42”
•Available in black only
•Sold in pairs
PART #
DESCRIPTION
3920-0114
Bad Bungee
QUALITY
TIE-DOWNS
SUG. RETAIL
$10.95
DASHES
& GAUGES
SUG. RETAIL
$13.95
FOOTRESTS
& LICENSE
PLATE FRAMES
13-1001
•1” x 66” top-quality nylon
web straps
•Rated at over 1,200-lb.
straight pull strength
•Cam-lock buckles
•Vinyl-coated hooks
on both ends
•Packaged and sold
in pairs
PART #
DESCRIPTION
13-1001
Red
13-1002
Black
13-1003
Blue
13-1002
15’ TIE-DOWN
13-1010
13-1003
SUG. RETAIL
$18.95
18.95
18.95
PART #
13-1010
13-1012
13-1012
DESCRIPTION
Neon green
Neon orange
SUG. RETAIL
$19.95
19.95
•Red 1” nylon web strap
rated for 1,200 lb.
straight pull strength
•The longest tie-down
we sell
•Cam-lock buckle
•Two vinylcoated hooks
•Packaged and
sold each
PART #
DESCRIPTION
13-1020
15’ Cam-lock tie-down
All part numbers in BOLD MAGENTA are new for 2009.
FRAMES,
SUSPENSION
& FENDERS
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
SUG. RETAIL
$17.95
COVERS,
SECURITY
& GENERAL
1221
SECTION
21
WINDSHIELDS
HEAVY-DUTY CAM BUCKLE
TIE-DOWNS
•1” nylon web strap, 66” long
heavy-duty; rated at more than
1,200 lb. straight pull strength
•Cam action buckle
•Vinyl-coated 3/8” hooks
•Easy operation with maximum
holding power
•Packaged and sold in pairs
TOURING
LUGGAGE
SEATS &
SISSY BARS
TD100
TD200
TD300
EXHAUST
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
DESCRIPTION
Red
Blue
Black
HEAVY-DUTY
RATCHETING
TIEDOWNS
•1” nylon
web strap,
6’ long; rated
at more than 1,200 lb.
straight pull strength
•Ratchet for easy cinching
•Vinyl-coated 3/8” hooks
•Packaged and sold each
PART #
131021
131022
131023
DESCRIPTION
Red
Black
Blue
TANKS &
OIL FILTERS
DASHES
& GAUGES
HEAVY-DUTY RATCHETING
TIE-DOWNS WITH BUILT-IN ASSIST
131023
SUG. RETAIL
$18.95
18.95
18.95
•1” nylon web strap, 6’ long with built-in assist;
rated at more than 1,200 lb. straight
pull strength
•Ratchet for easy cinching
•Vinyl-coated 3/8” hooks
•Available in black, red or blue; packaged and
sold each
PART #
3920-0074
3920-0075
3920-0076
DESCRIPTION
Black
Red
Blue
SUG. RETAIL
$17.95
17.95
17.95
3920-0078
•11/2” x 6’ webbing is rated at 5,000 lb. strength
•Nonslip cam buckles are made of strong
cast aluminum
•Hooks are 3/8” in diameter and rated at
1,200 lb. strength
•Full vinyl coating to protect chrome and paint
•Packaged and sold in pairs
3920-0080
TD00300
TD00200
3920-0081
HEAVY-DUTY CAM BUCKLE
TIE-DOWNS WITH BUILT-IN ASSIST
•11/2” x 6’ with built-in assist
•Webbing is rated at 5,000 lb. strength
•Nonslip cam buckles are made of strong
cast aluminum
•Hooks are 3/8” in diameter and rated at
1,200 lb. strength
•Full vinyl coating to protect chrome and paint
•Packaged and sold in pairs
PART #
DESCRIPTION
SUG. RETAIL
TD00100
Red
$22.95
TD00200
Blue
22.95
TD00300
Black
22.95
3920-0084
TIRES,
TUBES &
WHEELS
3920-0079
3920-0077
HEAVY-DUTY
CAM BUCKLE TIE-DOWNS
3920-0082
HEAVY-DUTY
RATCHETING TIE-DOWNS
PART #
3920-0077
3920-0078
3920-0079
•11/2” x 6’ webbing is rated at 5,000-lb. strength
•Ratcheting for easy cinching
•Two vinyl-coated hooks rated at 1,200 lb.
straight pull strength
•Packaged and sold each
PART #
3920-0080
3920-0081
3920-0082
DESCRIPTION
Black
Red
Blue
DESCRIPTION
Black
Red
Blue
SUG. RETAIL
$18.95
18.95
18.95
1702-1000
SUG. RETAIL
$20.95
20.95
20.95
13-0002
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
3920-0072
3920-0076
TD00100
HANDLEBARS,
CONTROLS
& MIRRORS
BRAKES
3920-0073
3920-0074
131022
LIGHTING
CABLES
SUG. RETAIL
$19.95
19.95
19.95
3920-0071
•1” nylon web strap, 66” long heavy-duty with
built-in assist; rated at more than 1,200 lb.
straight pull strength
•Cam action buckle
•Vinyl-coated 3/8” hooks
•Easy operation with maximum holding power
•Packaged and sold in pairs
PART #
DESCRIPTION
SUG. RETAIL
3920-0071
Black
$19.95
3920-0072
Red
19.95
3920-0073
Blue
19.95
3920-0075
131021
FUEL/AIR
SYSTEMS
PART #
TD100
TD200
TD300
HEAVY-DUTY CAM
BUCKLE TIE-DOWNS
WITH BUILT-IN ASSIST
1702-1001
1702-1002
3920-0083
3920-0085
13-0001
13-0003
HEAVY-DUTY RATCHETING
TIE-DOWNS WITH BUILT-IN ASSIST
TIE-DOWN EXTENSIONS
TIE-DOWN EXTENSIONS
HARDWARE,
CHEMICALS
& TOOLS
•11/2” wide 18” long looped nylon straps
•Use to extend tie-down reach or for added
protection of handlebars, seat rails, etc.
•3,000 lb. assembly strength
•Sold in pairs
•Extend reach or may be used as “soft ties” to
protect handlebars, finishes, etc.
•Constructed of 1” top-quality web
•18” long with loops on both ends
•Sold in pairs
•11/2” x 6’ with built-in assist
•Webbing is rated at 5,000-lb. strength
•Ratcheting for easy cinching
•Two vinyl-coated hooks rated at 1,200 lb.
straight pull strength
•Packaged and sold each
COVERS,
SECURITY
& GENERAL
PART #
3920-0083
3920-0084
3920-0085
PART 3
13-0001
13-0002
13-0003
PART #
1702-1000
1702-1001
1702-1002
1222
DESCRIPTION
Black
Red
Blue
SUG. RETAIL
$7.95
7.95
7.95
DESCRIPION
Red
Black
Blue
SUG. RETAIL
$5.95
5.95
5.95
All part numbers in BOLD MAGENTA are new for 2009.
DESCRIPTION
Red
Black
Blue
SUG. RETAIL
$23.95
23.95
23.95
SECTION
21
WINDSHIELDS
RETRACTOR-2
TIE-DOWNS
RETRACTOR-1
TIE-DOWNS
3920-0122
•Automatic retracting
strap allows for easy
setup and removal
•Ratchet allows for precision
tension control
•Available with S-hooks or secure
hooks that ensure a solid fitting no
3920-0123
matter what the conditions
•Attached “secure hook” carabiner
design provides additional security, or use the built-in bolt mount to
permanently secure the tie-down to the walls or floor of a trailer
•2” W black webbing
•6’ L
•Assembly rated to 3,000 lb.
•Sold in pairs
PART #
DESCRIPTION
SUG. RETAIL
3920-0122
Retractor-2 tie-downs w/ S-hooks
$68.95
3920-0123
Retractor-2 tie-downs w/ secure hooks
73.95
TOURING
•Automatic retracting strap
allows for easy setup and removal
•Ratchet allows for precision
tension control
•Snap hooks ensure a solid fitting no matter
what the conditions
•1” W black webbing
•7’ L
•Assembly rated to 2,000 lb.
•Sold in pairs
PART #
DESCRIPTION
3920-0121
Retractor-1 tie-downs
LUGGAGE
SEATS &
SISSY BARS
SUG. RETAIL
$67.95
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
11/2” BACK-END RATCHET TIE-DOWN
•Designed especially to secure the back end of
custom bikes (via the swingarm) where the distance
from floor to frame is very short
•Wraparound area on bike where no hooking
point is available
•Ratchet length can be made as short as 9”
•54” L
•Adjustable sheepskin sleeve
•Sold in pairs
NOTE: May require the use of a Soft-Tye for
some applications.
PART #
DESCRIPTION
3920-0029
Back-end ratchet tie-down
TRANSMISSION
& DRIVELINE
1” RATCHET WITH SOFT-TYE
SUG. RETAIL
$28.95
•Intended for middle-weight snowmobiles, bikes, ATVs, PWC
and shop equipment
•Industrial-grade PowerTye ratchet
•Sewn-in soft-tye
•4,500-lb. test nylon webbing
•3/8” heavy-duty vinyl-coated hooks
•1,200-lb. assembly strength
•Double security stitching
•6’ length
•Sold in pairs
PART #
DESCRIPTION
3920-0048
1” Ratchet w/ soft-tye
GASKETS
& SEALS
ELECTRICAL
SUG. RETAIL
$32.95
LIGHTING
1” RATCHET
NEOPRENE
RATCHET COVER
•Intended for middle-weight bikes,
snowmobiles, ATVs, PWC and shop equipment
•Industrial-grade PowerTye ratchet
•4,500-lb. test nylon webbing
•3/8” heavy-duty vinyl-coated hooks
•1,200-lb. assembly strength
•Double security stitching
•6’ length
•Sold in pairs
PART #
DESCRIPTION
SUG. RETAIL
3920-0047
1” Ratchet
$29.95
•Keeps the metal ratchet from
damaging paint and chrome
•Also keeps excess webbing together
•Makes the ratchet stay in the
locked position
•Will fit 1” to 2” strap
•PowerTye logo
•Patent pending
•Sold in pairs
PART #
DESCRIPTION
3920-0052
Ratchet cover
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
SUG. RETAIL
$15.95
BRAKES
TANKS &
OIL FILTERS
3920-0035
3920-0037
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
3920-0036
3920-0038
3920-0039
3920-0040
3920-0041
3920-0042
3920-0043
1” SOFT-TYE TIE-DOWNS
1” STANDARD TIE-DOWNS
•4,500-lb. test nylon webbing
•Industrial-grade PowerTye cam buckle
•3/8” heavy-duty vinyl-coated hooks
•1,200-lb. assembly strength
•Hand loops for pulling tight
•51/2’ length
•Double security stitching
•Sold in pairs
PART #
DESCRIPTION
SUG. RETAIL
3920-0035
Black
$18.95
3920-0036
Red
18.95
3920-0037
Blue
18.95
•Original PowerTye design features sewn-in soft-tye
•4,500-lb. test nylon webbing
•3/8” heavy-duty vinyl-coated hooks
•PowerTye EZ release, non-slipping teardrop buckle
•1,200-lb. assembly strength
•Hand loop for pulling tight
•51/2’ length plus soft-tye
•Double security stitching
•Sold in pairs
PART #
DESCRIPTION
SUG. RETAIL PART #
3920-0038
Black/black
$21.95 3920-0041
3920-0039
Black/red
21.95 3920-0042
3920-0040
Black/blue
21.95 3920-0043
All part numbers in BOLD MAGENTA are new for 2009.
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
DESCRIPTION
Black/silver
Black/green
Black/yellow
SUG. RETAIL
$21.95
21.95
21.95
COVERS,
SECURITY
& GENERAL
1223
SECTION
21
WINDSHIELDS
3920-0145
3920-0173
TOURING
LUGGAGE
3920-0147
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
3920-0146
11/2” FAT STRAP DELUXE
11/2” RATCHET WITH SAFETY LATCH HOOKS
•11/2”
ratchet tie-downs with vinyl-coated secure hook ends
•6,000-lb. test nylon webbing; 1,500-lb.-rated assembly
•Double security stitching
•61/2’ L
•Sold in pairs
•Made in the U.S.A.
PART #
3920-0145
3920-0146
3920-0147
DESCRIPTION
Red
Black
Blue
SUG. RETAIL
$35.95
35.95
35.95
3920-0138
GASKETS
& SEALS
FAT STRAP TRAILER KITS
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1224
•Everything needed for a secure tie down
•Kits include two pair of Fat Strap 11/2” deluxe ratchet tie-downs with
genuine sheepskin sleeve and vinyl-coated secure hook ends
•6,000-lb. test nylon webbing; 1,500-lb.-rated assembly
•Double security stitching
•61/2’ L
•Include heavy-duty Cordura® nylon storage bag with zipper top closure
•Made in the U.S.A.
PART #
3920-0137
3920-0138
3920-0174
SUG. RETAIL
$40.95
40.95
FAT STRAPS
3920-0137
TRANSMISSION
& DRIVELINE
ELECTRICAL
•11/2” W Chromacoat ratchet
•Vinyl-coated, S-style snap-hook end
•Sewn-in sheepskin Soft-Tye
•6,000-lb. test nylon webbing
•1,500-lb. rated assembly
•61/2’ length
•Double security stitching
•Sold in pairs
PART #
DESCRIPTION
3920-0173
Black
3920-0174
Orange
DESCRIPTION
Black
Orange
•Feature 6,000-lb. test
nylon and 1,200-lb.
rated assembly strength
•11/2” W with a
choice of quick-lock
buckle or ratchet
•Snap-hook secure
ends fit 1” rails
•Ideal for thicker Pro-bars
3920-0027
or a tight area not suitable
for hooks
•Soft-Tye is sewn in so you won’t lose it
3920-0028
•PowerTye teardrop buckle
•Double security stitching
PART #
DESCRIPTION
•Hand loop for pulling tight
3920-0027 W/ cam buckle
•51/2’ L
3920-0028 W/ ratchet
•Made in the U.S.A.
SUG. RETAIL
$23.95
38.95
SUG. RETAIL
$89.95
89.95
1” SOFT-TYE
TIE-DOWNS
WITH
SECURE HOOKS
3920-0172
3920-0011
3920-0010
BIG DADDY’S TIE-DOWNS
•Feature sewn-in
Soft-Tye and locking
safety secure hooks
•4,500-lb. test
nylon webbing
•3/8” heavy-duty
vinyl-coated hooks
•PowerTye EZ release,
non-slipping
3920-0044
teardrop buckle
3920-0045
•1,200-lb. assembly strength
•Hand loop for pulling tight
•51/2’ length plus soft-tye
•Double security stitching
•Sold in pairs
PART #
DESCRIPTION
3920-0044
Black
3920-0045
Red
3920-0046
Blue
•Feature 7,400-lb. test nylon and 2,600-lb.-rated assembly
•2” W with a choice of quick-lock buckle or ratchet
•Available with vinyl-coated snap-hook ends with or without sewn-in
Soft-Tye, or vinyl-coated snap hook with 3/8” S-hook bar end
•Measure 61/2’ L
•Sold in pairs
•Made in the U.S.A.
3920-0046
PART #
3920-0010
3920-0011
3920-0172
SUG. RETAIL
$22.95
22.95
22.95
DS-110213
DS-110215
DESCRIPTION
SUG. RETAIL
Ratchet w/ two snap-hook ends
$43.95
Ratchet w/ two snap-hook ends and sewn-in
sheepskin Soft-Tye; black
54.95
Ratchet w/ two snap-hook ends and sewn-in
54.95
sheepskin Soft-Tye; orange
Rachet w/ snap-hook/S-hook end combination
38.95
Quick-lock w/ snap-hook/S-hook
end combination
33.95
3920-0050
3920-0051
1” SOFT-TYE/EXTENSIONS
•Perfect for bars or secure areas
too thick for hooks
•Won’t scratch paint or chrome
•4,500-lb. test nylon webbing
•18” length
•Sold in pairs
PLUSH
SOFT-TYE COVERS
•Slide over existing 1” or
11/2” tie-down extensions
to guard against scratching
paint or chrome
•Strap not included
•Sold in pairs
PART #
3920-0136
DESCRIPTION
Plush soft-tye covers
SUG. RETAIL
$7.95
3920-0049
All part numbers in BOLD MAGENTA are new for 2009.
PART #
3920-0049
3920-0050
3920-0051
3920-01201
1
DESCRIPTION
Black
Red
Blue
Black
Measures 12” L.
SUG. RETAIL
$6.95
6.95
6.95
6.95
SECTION
21
WINDSHIELDS
3920-0012
TOURING
11/2” RATCHET/CAM STRAP
•Great for single-person loading
•Quick-adjusting and easy release
with cam buckles
•Sold in pairs
PART #
DESCRIPTION
3920-0175
11/2” ratchet/cam strap
LUGGAGE
SUG. RETAIL
$52.95
3920-0140
3920-0139
DS-110217
3920-0013
SEATS &
SISSY BARS
SHEEPSKIN SOFT-TYES
•1.5” Soft-Tyes have 6,000-lb. test, and 1” Soft-Tyes have 4,500-lb. test nylon
•18” L and has a 9” L sheepskin sleeve to protect paint and chrome
•Reusable storage pouch
•Sold in pairs
•Made in the U.S.A.
PART #
3920-0012
3920-0013
DS-110217
11/2”
CAM-BUCKLE WITH
SAFETY-LATCH HOOKS
AND SOFT-TYE
•6,000-lb. test nylon webbing;
1,200-lb.-rated assembly
•Double security
stitching and
PART #
sewn-in soft-tye
3920-0139
•6’ L
3920-0140
•Sold in pairs
•Made in the U.S.A. 3920-0141
DESCRIPTION
Black/red
Black/black
Black/blue
TRANSMISSION
& DRIVELINE
SUG. RETAIL
$24.95
24.95
24.95
GASKETS
& SEALS
11/2” CAM-BUCKLE WITH
SAFETY LATCH HOOKS
SUG. RETAIL
$23.95
TIE-DOWN STORAGE BAG
•Ideal for storing your PowerTye tie-downs
•Made of heavy-duty Cordura® nylon
•Barrel lock-string closure
•Holds five pairs of 1” tie-downs or two pairs
of 2” tie-downs
•PowerTye logo
•Sold each
•Ideal for storing your
PowerTye tie-downs
•Made of heavy-duty Cordura nylon
•Zipper closure
•Holds up to four pairs
of Big Daddy’s tie-downs
or eight pairs of 1” tie-downs
•PowerTye logo
PART #
DESCRIPTION
3550-0076
Tie-down duffle bag
SUG. RETAIL
$5.95
•Made of durable, high-impact rubber
•Fits horizontal E-Tracks
•Prevents things getting caught underneath
the track ends
•Gives your E-Track a clean, professional look
•Sold in pairs
PART #
DESCRIPTION
3920-0171
E-Track rubber end piece
•11/2” cam-buckle tie-downs with
vinyl-coated secure hook ends
•6,000-lb. test nylon webbing; 1,200-lb.-rated assembly
•Double security stitching
•51/2’ L
•Sold in pairs
•Made in the U.S.A.
PART #
DESCRIPTION
3920-0142
Red
3920-0143
Black
3920-0144
Blue
3920-0144
ELECTRICAL
LIGHTING
SUG. RETAIL
$24.95
24.95
24.95
TIE-DOWN DUFFLE BAG
E-TRACK RUBBER END PIECE
3920-0148
FUEL/AIR
SYSTEMS
3920-0143
3920-0142
•12” L covers with hook-and-loop closures are
manufactured from genuine sheepskin
•Can be attached to any 1”-2” W web straps
•Protect paint and chrome from scratches
and scuffing
•Sold in pairs
PART #
DESCRIPTION
3920-0014
2” W sheepskin strap covers
DESCRIPTION
Storage bag
SUG. RETAIL
$21.95
9.95
18.95
ENGINE
3920-0141
SHEEPSKIN STRAP COVERS
PART #
3550-0024
DESCRIPTION
1.5” w/ sheepskin sleeves
1.5” w/o sleeves
1” w/ sheepskin sleeves
EXHAUST
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
SUG. RETAIL
$10.95
TANKS &
OIL FILTERS
DASHES
& GAUGES
SUG. RETAIL
$11.95
3920-0149
E-TRACK CLIPS
•Clip into standard E-tracks (E/A series)
•Can be repositioned for best attachment point
•Available in D-ring with 2” Big Daddy strap (rated 2,000-lb. pull) and
heavy-duty O-ring (rated 6,000-lb. pull)
•Sold in 4-packs
•Track not included
PART #
DESCRIPTION
SUG. RETAIL
3920-0148
D-ring clips
$23.95
3920-0149
O-ring clips
29.95
E-TRACK HORIZONTAL TRACKS
FRAMES,
SUSPENSION
& FENDERS
•58” L
•Strong 12-gauge steel
•Silver zinc-plated
•Great for personal or commercial trailers
FOOTRESTS
& LICENSE
PLATE FRAMES
3920-0169
PART #
3920-0169
3920-0170
DESCRIPTION
E-tracks (2 pack)
E-tracks (8 pack)
SUG. RETAIL
$47.95 (pr.)
21.95 (ea.)
TIRES,
TUBES &
WHEELS
E-TRACK STRAP
•2” wide x 7” long strap
•Hooks into the E-Track
•D-ring end allows the use of any standard
tie down
•Black only; sold each
PART #
DESCRIPTION
3920-0070
E-Track strap (ea.)
All part numbers in BOLD MAGENTA are new for 2009.
HARDWARE,
CHEMICALS
& TOOLS
SUG. RETAIL
$7.95
COVERS,
SECURITY
& GENERAL
1225
SECTION
21
3920-0007
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
INTEGRA RAT PAK
3920-0004
INTEGRA TIE-DOWNS
•Premium-quality
motorcycle tie-downs
•Cam buckle tie-down with
softhook extension strap
•Same features as original
tie-downs but with a softhook
extension strap
•69” usable length with 1,200-lb.
straight tension strength
•1” aircraft-quality nylon straps
•Patented pressure-plate cam-lock buckles
•1,800-lb. cam-buckle strength
•Vinyl-coated S-hooks
•Sold in pairs
PART #
DESCRIPTION
3920-0002
Red
3920-0003
Black
3920-0004
Blue
3920-0003
3920-0002
SUG. RETAIL
$36.95
36.95
36.95
FUEL/AIR
SYSTEMS
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
40888-31
PART #
40888-25
40888-34
STANDARD
51/2’ TIE-DOWNS
CABLES
•1” aircraft-quality
nylon straps
•66” L with
1,200-lb. straight
tension strength
•Patented pressure
plate cam-lock buckles
•Vinyl-coated S-hooks
•Sold in pairs
BRAKES
PART #
40888-10
40888-26
HANDLEBARS,
CONTROLS
& MIRRORS
DESCRIPTION
Red
Black
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1226
SUG. RETAIL
$20.95
47295-11
1” TIE-DOWNS
•Five hot colors
•66” L x 1” W nylon straps
with 1,000-lb. straight
tension strength
•Popular Ancra
cam-lock buckles
•One vinyl-coated and one
47295-16
47295-12
zinc-plated S-hook per strap
47295-10
•Sold in pairs
PART #
DESCRIPTION SUG. RETAIL PART #
DESCRIPTION SUG. RETAIL
47295-14 Orange
$23.95 47295-11 Red
$23.95
47295-16 Lime green
23.95 47295-12 Blue
23.95
47295-10 Black
23.95
40888-26
SUG.
RETAIL
$30.95
30.95
PART #
40888-31
40888-34
SUG.
RETAIL
$30.95
30.95
DESCRIPTION
Olive
Blue
TANKS &
OIL FILTERS
DASHES
& GAUGES
DESCRIPTION
13’ red tie-down
47295-14
SUG. RETAIL
$35.95
35.95
40888-10
LIGHTING
SUG. RETAIL
$39.95
39.95
39.95
•1” abrasion-resistant
nylon strap
•13’ L with 1,200-lb. straight
tension strength
•Vinyl-coated S-hooks
•Sold each
RAT PAK
•Twin-pack of ratchet-buckle
tie-down straps with safety locks
for securing motorcycles, ATVs and other equipment
•Measure 6’ L
•Vinyl-coated hooks protect finish
•Durable nylon web strap
•1,200-lb. assembly strength; 400-lb. working load limit
PART #
DESCRIPTION
3920-0008
Red
3920-0009
Black
3920-0006
13’ RED TIE-DOWN
3920-0009
3920-0008
ENGINE
•Twin pack of ratchet-buckle tie-downs
with softhook tie-down strap
for securing motorcycles, ATVs
and other equipment
•Same features as the original Rat Pak
but with a softhook tie-down strap
•Measure 6’ L
•Vinyl-coated hooks protect finish
•Durable nylon web strap
3920-0005
•Ratchet buckle features a safety lock
•1,200-lb. assembly strength; 400-lb.
working load limit
PART #
DESCRIPTION
3920-0005
Red
3920-0006
Black
3920-0007
Blue
WHEEL TIE-DOWNS
•Hold wheels tightly against chocks
•36” L x 1” W black polypropylene
•Nickel-plated spring-loaded
side buckles
•Sold in pairs
SUG.
PART #
DESCRIPTION
RETAIL
41075-10 Wheel tie-downs
$9.95
TIE-DOWN SOFT
HOOK EXTENSIONS
•18” looped nylon straps protect
painted and chrome surfaces
•Use for extension or additional
protection of handlebars,
seat rails, etc.
•3,000-lb. assembly strength
•Sold in pairs
PART #
45214-10
DESCRIPTION
Tie-down extensions
3930-0004
SUG. RETAIL
$6.95
3930-0005
QUICK-DISCONNECT
TIE-DOWN ANCHOR KIT
•Quick-disconnect tie-down ring bolts
to trailer bed, truck box, etc.
•11/8” ring swivels 360° for perfect
alignment with direction of pull
•Ring easily detaches from contoured
aluminum when not needed
•Designed to withstand 4,000-lb.
straight, 2,000-lb. side pull forces
•Comes with nylon locknuts
•Sold each
PART #
DESCRIPTION
40890-10 Tie-down anchor
SUG.
RETAIL
$15.95
CUSTOM TIE-DOWN BRACKETS
•Stylish custom brackets bolt to the side of the
front fork to provide a secure, easily accessible
point to attach tie-downs
•Will work with detachable windshields on FLHR models
•Sold in pairs
PART #
DESCRIPTION
FOR 83-08 FLHTCU, FLHTC, FLHT, FLHR, FLHRC AND FLHRS
3930-0004
Teardrop
3930-0005
Silhouette
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$49.95
49.95
SECTION
QUICK-DETACH
STRAP KIT
LOOP STRAP KIT
ADJUSTABLE
BUNGEE KIT
•Two length-adjustable nylon straps
•Measure 38” L; 19” L when end buckles (one
male, one female) are connected
•Perfect fit for D-rings found on most bags
•Makes mounting anything easy
•Includes two heavy-duty bungee cords, each
with two rugged hooks
•Cord length is adjustable from 5”-24”
•Two lengthadjustable
nylon
straps are
included;
each measures 38” L
when buckles are unconnected
•Each strap includes one male and one
female buckle, plus a second male buckle
sewn to the strap which plugs into most
Saddlemen luggage
•Two separate female buckles also included
for custom applications
PART #
3920-0155
PART #
3920-0154
PART #
3920-0156
DESCRIPTION
Loop strap kit
SUG. RETAIL
$7.95
DESCRIPTION
Adjustable Bungee Kit
SUG. RETAIL
$9.95
DESCRIPTION
Quick-Detach strap kit
21
WINDSHIELDS
TOURING
LUGGAGE
SUG. RETAIL
$8.95
SEATS &
SISSY BARS
EXHAUST
3290-0060
3920-0058
3290-0059
FUEL/AIR
SYSTEMS
BAR-HARNESS
AND BAR-HARNESS II
ENGINE
BAR-HARNESS
•A hassle-free way to secure motorcycles; virtually eliminates the possibility of damage to bodywork
•Simple, quick and very easy to use; mounts on the grips and keeps tie-downs away from the body
•Nylon webbing has tensile strength of over 5,500 lb.
•Can be used on wide variety of motorcycles
3290-0151
TRANSMISSION
& DRIVELINE
BAR-HARNESS II
GASKETS
& SEALS
•Bar-Harness II has a glass-filled injection molded polycarbonate “cup” to replace the old handlebar “cuff”
•Eliminates possible damage to soft grips and holds the cross straps farther away from the switchgear
•Sized to fit the widest grips on the market
•Uses a heavier thread with more stitches to provide greater strength
3920-0062
•Available in five black sizes: short, standard, wide, X-wide and XX-wide
PART #
DESCRIPTION
SUG. RETAIL
SHORT (FIT BARS UP TO 28” W)
3920-0150
Black Bar-Harness II
$29.95
3920-0058
Red
29.95
3920-0059
Blue
29.95
3920-0060
Black
29.95
SPORT/STANDARD (FIT BARS UP TO 32” W)
3920-0151
Black Bar-Harness II
29.95
37105
Red
29.95
37205
Blue
29.95
PART #
DESCRIPTION
SPORT/STANDARD
(FIT BARS UP TO 32” W) (CONT)
37505
Black
WIDE (FIT BARS UP TO 34” W)
3920-0061
Black
X-WIDE (FIT BARS UP TO 36” W)
3920-0152
Black Bar-Harness II
XX-WIDE (FIT BARS UP TO 40” W)
3920-0153
Black Bar-Harness II
ELECTRICAL
SUG. RETAIL
STRAP WRAPPERS
$29.95
29.95
29.95
29.95
•Slip over tie-down hooks; prevent strap rash
and buckle bruise
•Fit both the Bar-Harness and Bar-Harness II
•Measure approximately 12” L x 11/2” W
•Sold in pairs
PART #
DESCRIPTION
STRAP WRAPPERS
3920-0062 Strap wrappers; black
SUG. RETAIL
$3.95
STRAP RACK
DESCRIPTION
Strap rack
TIE-DOWN ANCHORS
BRAKES
•Designed to fit trucks with
or without stake pocket holes
•Can be used with bedliners
•Easy to install
•Sold in pairs
SUG. RETAIL
$44.95
PART #
3920-0064
DESCRIPTION
Tie down anchors (pr.)
SUG. RETAIL
$14.95
1012
FRAMES,
SUSPENSION
& FENDERS
3920-0069
THD-500
•Exceptional strength and convenience
•Made of hardened steel with rust-resistant zinc
plating to beat the elements
•Each fits into pocket in trailer bed; can be bolted
down or welded into place
THD-700
•THD-500 measures 5” x 3.5” and fits into
a 3” dia. x 5/16” deep pocket; pull limit of 1,200 lb.
•THD-600 is surface-mount style and measures 25/16” x 11/4” with
a .200” dia. D-ring; pull limit of 750 lb.
•3920-0069 is a round, protected surface-mount style surrounded
by plastic ramped bodies and measures 41/8” dia. x 1/2” H with a .25” dia.
D-ring; pull limit is 1,500 lb.
•THD-700 measures
SUG.
41/2” x 5” and fits
PART #
DESCRIPTION
RETAIL
into a 31/2” dia. x
THD-600
750 lb. pull hold-down (4 pk.)
$14.95
1” deep pocket; pull
THD-500
1,200 lb. pull hold-down (pr.)
13.95
limit of 5,000 lb.
3920-0069 1,500-lb. pull hold-down (pr.)
14.95
•Drain hole in
THD-700
5,000 lb. pull hold-down (pr.)
22.95
the base
TANKS &
OIL FILTERS
DASHES
& GAUGES
THD-600
CARGO
HOLD-DOWNS
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
•Don’t put your
tie-downs in a bag
or lay them on the
floor ending up with
a tangled mess
•Get organized and have
the tie-downs easily accessible
•CNC-machined billet aluminum strap
rack is 17” L; designed for trailers with 16” stud wall spacing
•Soft strap hanger can be installed on the left or right
•Made in the U.S.A.
PART #
3911-0031
LIGHTING
1033B
4024B
BUNGEE CORDS
•Multi-colored, unless PART #
includes “B” suffix (black)
PART # DESCRIPTION SUG. RETAIL
2-HOOK
1012
12”
$1.95
1018B
18”
2.95
1024B
24”
25.95
1030
30”
2.95
1036
36”
2.95
All part numbers in BOLD MAGENTA are new for 2009.
PART # DESCRIPTION SUG. RETAIL
3-HOOK
1033B
24”
$2.95
4-HOOK
4024B
24”
4.95
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1227
SECTION
21
WINDSHIELDS
3920-0067
3920-0065
DS-110219
TOURING
DS-110216
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
•Double-folded heavy-duty coated hooks
•9mm natural rubber with cloth cover
•2-hook bungee cords are sold in a 10-pack and the 4-hook is sold each
BLACK ELASTIC STRAPS
•Strong, 10mm black elastic straps in varying lengths
•Quick, easy way to attach and carry extra items
•Completely plastic-coated heavy-gauge hooks
•Available in two- and four-hook designs
PART #
DS-110216
DS-110218
DS-110219
DS-110222
FUEL/AIR
SYSTEMS
ENGINE
DOUBLE-HOOK
BUNGEE CORDS
DS-110222
DS-110218
DESCRIPTION
12” 2-hook
16” 2-hook
20” 2-hook
24” 4-hook
SUG. RETAIL
$1.95
1.95
2.95
2.95
K31-6541
K31-6539
BUNGEE NETS
•Versatile nets hold down
nearly anything
•Stretch to over double
their 15” square size
•Six coated, nonabrasive hooks
PART #
DESCRIPTION SUG. RETAIL
K31-6539 Black
$4.95
K31-6541 Red
4.95
K31-6543
K31-6546
PART #
2-HOOK
3920-0066
3920-0067
3920-0068
4-HOOK
3920-0065
LENGTH
SUG. RETAIL
12” (10-pk.)
18” (10-pk.)
24” (10-pk.)
$1.95 (ea.)
1.95 (ea.)
1.95 (ea.)
24”
2.95 (ea.)
CARGO NETS
•Quality black cargo nets
made of strong elastic cord
•Include unbreakable,
non-corroding hooks; available in
two sizes
PART #
DS-110211
DS-110212
DESCRIPTION
15” x 15”
12” x 17”
SUG.
RETAIL
$4.95
4.95
DS-110212
DS-110211
PART #
DESCRIPTION SUG. RETAIL
K31-6543 Blue
$4.95
K31-6546 Purple
4.95
3920-0163
SHOCK CORDS
ELECTRICAL
3550-0026
3550-0027
LIGHTING
3920-0119
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
ADJUSTABLE
CARGO NETS
•Premium net is
constructed with
smaller 2” x 2” mesh (compared
to 3” x 3” standard mesh) to
secure cargo and help eliminate fall through
•Six ABS plastic hooks are adjustable, durable and designed to
reduce scratching
•Sub-hooks for quick tightening adjustments
•4.5mm (11/64”) bungee thickness
•Three colors to choose from
PART #
15” X 15”
3550-0025
3550-0026
3550-0027
15” X 30”
3920-0119
DESCRIPTION
SUG. RETAIL
Black
Red
Blue
$9.95
9.95
9.95
Black
14.95
1228
16”
24”
36”
SUG.
RETAIL
$6.95
7.95
8.95
•No more scratched paint or
chrome from bungee hooks
•Black synthetic leather
•Slips easily under passenger
seat giving added carrying
capacity with four padded D-ring mounting points
•Fully adjustable; fits most bikes and simple to use
with bungee cords or nets
PART # DESCRIPTION
•Measures 12” L x 71/2” H and can
HK622 The Hooker
adjust to approximately 211/2” L
SUG. RETAIL
$27.95
•Ideal for attaching bungee
cords and nets
•Available in three popular sizes
•Sold in pairs
PART #
85-83407
85-83409
85-83408
FLIP-UP
COVERS,
SECURITY
& GENERAL
DESCRIPTION
NET-NUTS
FOOTRESTS BUNGEE HOOKS
& LICENSE •Tired of bolting cable guides to your
PLATE FRAMES Softail struts for bungee hooks?
HARDWARE,
CHEMICALS
& TOOLS
3920-0166
THE HOOKER
FRAMES,
SUSPENSION
& FENDERS
TIRES,
TUBES &
WHEELS
•Heavy-duty shock cords
•Nylon hooks resist cracking,
even at -45°F
•Easy to adjust and has a flat profile cord
•Available in 16”, 24” and 36”
•Hippo strap works well to tie down tarps
and covers
•Sold each
SUG.
PART #
DESCRIPTION RETAIL PART #
HIPPO
SWIVEL
3920-0163
16”
$7.95 3920-0166
3920-0164
24”
8.95 3920-0167
3920-0165
36”
9.95 3920-0168
•These trick little bungee hooks fold
down against the strut when
not in use
•A stainless steel wave washer keeps
the hook where you place it and
away from your chrome strut
•Stamped from cold-rolled steel for
strength and durability
•Polished and chrome-plated for a long-lasting finish
•Easy installation
•Sold in sets of four
PART #
DESCRIPTION
DS-190898
For all 86-01 Softail models, except FXSTD
DESCRIPTION
Net-nuts, 5/16” x 18 SAE
Net-nuts, 3/8” x 16 SAE
Net-nuts, 3/8” x 24 SAE
SUG. RETAIL
$4.95
4.95
4.95
BUNGEE NUTS
•Made of chrome-plated, high-carbon steel
•Replace top shock nut to work as an excellent
bungee cord tie-down knob
•Available in two sizes to fit all popular motorcycles
•Sold in pairs
SUG. RETAIL
$15.95
PART #
BN-0C
BN-3C
DESCRIPTION
x 18 SAE
3/8” x 24 SAE; repl. OEM #98148-90T
5/16”
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$9.95
9.95
SECTION
21
WINDSHIELDS
UNIVERSAL COUPLER LOCK
ADJUSTABLE
COUPLER LOCK
•Features an adjustable locking pin
•The coupler has a 7/8” to 31/2” span
•Triple-plated with a chrome finish
PART #
4010-0086
DESCRIPTION
Universal coupler lock
SUG. RETAIL
$13.95
UMAX50 UNATTENDED
TRAILER LOCK
•Aluminum body with corrosion-resistant
powder-coat finish
•Hardened steel 5/8” hasp secures
unattended trailer
•Reinforced shoulder guard resists hammer
strikes and saw cuts
•Universal size, fits all coupler types from
17/8” to 25/16”
•Keyhole cover seals out dirt and grime
PART #
4010-0066
•Fits all coupler types and sizes from
17/8” to 25/16”
•Made of high-quality hardened steel
•Ballistic-grade polymer lock housing cover
resists hammer strikes and protects
lock mechanism
•AMS (Absolute Maximum Security) for your
trailer with 360° of solid steel security
•Patent pending dual-ratchet locking system
•Dual-force coupler lock can be used with
cable or chain to secure trailer to ground
anchor or fence
•Attractive package for grid rack or counter display
PART #
4010-0038
DESCRIPTION
Universal coupler lock
TOURING
LUGGAGE
SEATS &
SISSY BARS
SUG. RETAIL
$62.95
4010-0042
4010-0039
FUEL/AIR
SYSTEMS
DESCRIPTION
Universal coupler lock
4010-0043
SUG. RETAIL
$39.95
ENGINE
TRANSMISSION
& DRIVELINE
RESETTABLE COMBINATION
5/8” RECEIVER LOCKING PIN
•Easy-to-read numbers
•Forged-steel lock tip
•Triple-chrome-plated steel pin
•Heavy-duty collar overlaps hitch pin for unmatched strength and security
•Protective lock head cover included
PART #
4010-0033
DESCRIPTION
For 2” x 2” receivers (Class III, IV, V)
SUG. RETAIL
$19.95
FLIP-TIP RECEIVER PIN
•Polished stainless steel
•Easy operation; tip snaps firmly
into place to install or remove
•Sold each
PART #
4010-0035
DESCRIPTION
5/8” pin for all Class III, IV and V receivers
SUG. RETAIL
$9.95
4010-0031
MACHINED HARDENED STEEL
RECEIVER LOCKING PINS
•Quarter-turn locks/unlocks head
•Lock can’t pop open or false lock
•Triple-plated-chrome finish or black
epoxy powder-coated finish
PART #
4010-0030
4010-0031
4010-0032
4010-0032
DESCRIPTION
SUG. RETAIL
$20.95
Chrome, 1/2” for all Class II receiver hitches
5
Chrome, /8” for all Class III, IV and V receiver hitches
20.95
Black, 5/8” for all Class III, IV and V receiver hitches
20.95
SPARE TIRE LOCK
GASKETS
& SEALS
4010-0045
PREMIUM COUPLER LOCKS
4010-0046
•Choice of stainless steel or
triple-chrome-plated hardened steel
4010-0047
•Easy quarter-turn locks and unlocks head
•Can’t pop open or be falsely locked
•Patented design incorporates O-ring and watertight cap to help seal out
dirt and corrosion from the lock head mechanism
•Full-length solid forged lock pin can’t pull out
•Available individually or in keyed-alike sets
PART #
DESCRIPTION
INDIVIDUAL HARDENED STEEL LOCKS
4010-0039
For couplers w/ up to 7/8” span
4010-0040
For couplers w/ up to 9/16” span
4010-0041
For couplers w/ up to 2 1/2” span
4010-0042
For couplers w/ up to 3 1/2” span
KEYED-ALIKE HARDENED STEEL LOCK SETS
4010-0044
One 5/8” span lock and one 9/16” span lock
4010-0045
One 5/8” span lock and one 21/2” span lock
4010-0046
One 5/8” span lock and one 31/2” span lock
INDIVIDUAL STAINLESS STEEL LOCKS
4010-0043
For couplers w/ up to 9/16” span
KEYED-ALIKE STAINLESS STEEL LOCK SET
4010-0047
One 5/8” span lock and one 9/16” span lock
SUG. RETAIL
$14.95
18.95
18.95
18.95
35.95
35.95
35.95
49.95
SUG. RETAIL
$5.95
5.95
SOLID
STAINLESS STEEL
5/8” RECEIVER
LOCKING PIN
•Polished 100%
stainless steel
•Symmetrical design adds that classic finishing touch
•Head-pull strength rated at over 5,000 lb.
•Quarter-turn lock and unlock
•Patented dual lock lug design
•Patented internal O-ring cap helps seal out grime for trouble-free use
•Test specifications exceed 40,000 lb.
SUG. RETAIL
$20.95
PART #
4010-0034
DESCRIPTION
Stainless steel receiver locking pin
All part numbers in BOLD MAGENTA are new for 2009.
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
•Triple-chrome-plated
•Sold each
DESCRIPTION
1/2” for Class I and II receivers
5/8” for Class III, IV and V receivers
ELECTRICAL
26.95
DELUXE RECEIVER
PIN WITH CLIP
PART #
4010-0036
4010-0037
•The only spare tire lock that
secures both spare tire and
tire bracket to a welded
frame member
•Lock system loops around
welded frame member of
trailer or automobile frame
•Locks through wheel lug
nut hole for
maximum security
•Huge 12mm braided
steel cable
PART #
DESCRIPTION
4010-0051
Spare tire lock
EXHAUST
SUG. RETAIL
$29.95
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1229
SECTION
21
GORILLA GUARD™
TRAILER KEEPER
WINDSHIELDS
•The ultimate trailer lock, the Trailer
Keeper installs in minutes
•It’s totally adjustable – will fit most trailer wheels up to 15”
•Heavy-duty, hardened-steel construction and
case-hardened steel rod
•Attaches to special lug latch mounted on wheel, and locks in place with
special brass padlock (included)
•Doesn’t limit access to wheel bearing grease fittings
•Can be used with most trailers – snowmobile, ATV, boat/personal
watercraft, camping/RV, utility and more
COUPLER LOCK
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
•Like a chastity belt for trailers
– prevents coupler from mating with
unauthorized trailer hitch balls
•Revolutionary design shields lock from
tampering devices
•Heavy-duty cast construction
•For 2” couplers
PART #
TP20X
DESCRIPTION
2” Gorilla coupler lock
SUG. RETAIL
$60.95
PART #
TK100
DESCRIPTION
Trailer Keeper
SUG. RETAIL
$103.95
SWIVEL JACK
SWIVEL JACK
•Pivoting screw-type tongue jack
with 1,000-lb. capacity
•All mounting hardware
included to fit rectangular
tongues up to 3” x 5”; also fits
round tongues
•Precision-rolled extra-heavyduty Acme screw-type drive
with maximum maneuverability
from offset swivel caster
and tough 6”
polypropylene wheel
•Easily rotated to towing
position by spring-loaded
double-pin locking mechanism
•800-lb. capacity and up
to 25” of lift
•Factory-assembled mounting
bracket provides for quick and
easy trailer installation
•Fits trailer tongues up
to 3” x 5”
•1:1 sidewind gear ratio makes
operation simple
•Constructed of heavy-duty
zinc-plated steel tubing with
6” reinforced poly wheel
•Weighs 17 lb.
•Made in the U.S.A.
PART #
TJ503
DESCRIPTION
Swivel jack
SUG. RETAIL
$71.95
PART #
3902-0052
DESCRIPTION
Swivel jack
JACK WITH FOOT
•Ideal for motorcycle,
ATV, personal watercraft,
snowmobile and other
light-duty trailers
•1,000-lb. capacity
•Swing-away design
•Bolt-on swivel bracket;
no welding required
•All steel construction
•10” of travel
•Weighs 13 lb.
•Made in the U.S.A.
SUG. RETAIL
$44.95
PART #
TJ100F
DESCRIPTION
Jack with foot
SUG. RETAIL
$64.95
3902-0048
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
3902-0051
TONGUE HINGE KIT
•Allows 3 feet of the trailer
tongue to fold away; trailer
can store in a smaller area
•Hides manually cut surfaces
for a clean look
•Installs on existing 3” x 3”
trailer tongue; all mounting
hardware included
•600-hour salt spray rating on all plated surfaces
PART #
3902-0044
TRAILER BALLS
•Solid steel construction; chrome-plated
DESCRIPTION
Hinge kit
SUG. RETAIL
$111.95
PART #
3902-0048
3902-0049
3902-0050
3902-0051
HITCH BALL
DIAMETER
17/8”
17/8”
2”
2”
SHANK
DIAMETER
3/4”
1”
3/4”
1”
SHANK
LENGTH
11/2”
2”
15/8”
2”
CAPACITY
2,000 lb.
2,000 lb.
3,500 lb.
5,000 lb.
SUG.
RETAIL
$6.95
8.95
7.95
8.95
CABLES
BRAKES
TRAILER BALLS
B178S
•Cold-forged solid steel
•Made in the U.S.A.
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1230
PART #
B178S
B200S
1706-0146
HITCH BALL
DIAMETER
17/8”
2”
2”
SHANK
DIAMETER
3/4”
3/4”
1”
SHANK
LENGTH
11/2”
11/2”
2”
SUG.
CAPACITY RETAIL
2,000 lb.
$9.95
3,500 lb.
9.95
6,000 lb.
10.95
RECEIVER TUBES
HI-MOUNT
SPARE TIRE CARRIER
•Dropdown receiver tubes match
3902-0045
value and quality
•Solid one-piece forged construction
•For receiver hitches with 2” x 2” box opening
•For hitch balls with 1” shank diameter
•Heavy-duty welded and reinforced steel plate construction
with galvanized finish
•Adjustable bolt circle to fit both 4- and 5-lug wheels
•Fits all tongues up to 3” W x 4” H
•Easy bolt-on installation
PART #
3902-0045
3902-0046
PART #
3902-0055
DESCRIPTION
3.25” drop
2” drop
SUG. RETAIL
$22.95
23.95
DESCRIPTION
Hi-mount spare tire carrier
SUG. RETAIL
$29.95
3902-0046
TRAILER COUPLERS
FIVE-PIN
MALE/FEMALE CONNECTOR
•Five-pin male/female connector for use with
any receiver hitch with five-pin connection
PART #
DS-708136
DESCRIPTION
Five-pin male/female connector
SUG. RETAIL
$15.95
•Coupler lock hole provided for additional
trailer security
•Zinc finish
•For use with 2” ball; 3,500-lb. rating
PART #
DESCRIPTION
3902-0053
Fits 21/2” i.d. channel
3902-0054
Fits 3” i.d. channel
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$18.95
19.95
SECTION
21
WINDSHIELDS
TRAILER HITCH CHAIN
WITH HOOKS
WHEEL COVERS
FOR TRAILERS
•Rated at 5,000 lb.
•Measures 72” long; sold each
PART #
DESCRIPTION
1706-0144
Safety chain w/ hooks
•Plastic 8” Maxam wheel covers for use
on most trailer wheels
•Chrome finish
•Sold in pairs
BEARING PROTECTOR
WITH BRA
PART #
DS-852136
DESCRIPTION
Maxam wheel covers
SUG. RETAIL
$12.95
FAS-LOK™ COUPLERS
•Straight tongue stamped couplers
with Fas-Lok mechanism enable quick
and easy hook-up
•Coupler lock hole provided for additional
trailer security
•Choose from 17/8” and 2” ball models
•Repair kits available; sold separately
PART #
COUPLERS
1706-0138
1706-0139
1706-0141
1706-0142
REPAIR KITS
1706-0140
1706-0143
SAE CLASS
17/8” / 2”
17/8” / 3”
2” / 2”
2” / 3”
I
I
II
II
SUG. RETAIL
$20.95
20.95
27.95
27.95
14.95
15.95
DELUXE TAILLIGHT KIT
•If you frequently pull your
trailer through driving rain
– these lights are so watertight
they can be fully submerged
•Diving bell/trapped air
system keeps bulbs dry
and safe; two standard side
marker lights complete the
package (use #194 bulbs)
•For trailers under 80” wide
•Kit contains two multifunction, fully submersible
taillights with gasketed lenses,
two stud mount amber side marker lights, license plate bracket, 25’
wishbone trailer harness, 48” trunk connector, hardware and installation
instructions (taillights use #1157 bulbs)
•Replacement side light lens PART #1706-0134 and taillight lens #1706-0133
available separately
PART #
DESCRIPTION
SUG. RETAIL
1706-0135
Deluxe taillight kit
$66.95
TAILLIGHT KIT
•Standard taillights
and wiring for
a wide variety
of trailers
•Specifically
designed for
trailers under
1706-0123
80” wide; with
clearance lights
and ID bars, kit meets lighting requirements for trailers 80” wide and
wider (use standard #1157 bulb)
•Kit contains two multi-function taillights, plastic license plate bracket,
20’ wishbone trailer harness, 48” trunk connector, mounting hardware
and instructions
•Taillights and replacement lenses available separately
PART #
1706-0123
1706-0124
1706-0125
1706-0133
1706-0134
DESCRIPTION
Standard taillight kit
Taillight (left-hand)
Taillight (right-hand)
Lens (taillight)
Lens (side light)
LUGGAGE
•Two great features in one product:
wheel bearing protector with bra that captures
any grease released by pressure relief
•No more grease on wheels
•Measure inner diameter of hub to obtain
proper size; sold in pairs
1706-0131
PART #
DESCRIPTION
3
1706-0131
1 /4”
1706-0132
2”
0213-0002
2” protector cover
SEATS &
SISSY BARS
SUG. RETAIL
$25.95
23.95
4.95
EXHAUST
FUEL/AIR
SYSTEMS
1706-0138
BALL SIZE/CHANNEL WIDTH
For 17/8” ball couplers
For 2” ball couplers
TOURING
SUG. RETAIL
$29.95
SUG. RETAIL
$43.95
12.95
12.95
3.95
2.95
ENGINE
WATERPROOF LOWPROFILE TAILLIGHT KIT
•Replaceable sealed lamp capsule
protects bulb and electrical
contacts from thermoshock
1706-0119
and corrosion
•Launch and load again and again – water cannot penetrate the capsule
•Kit contains two waterproof low-profile taillights, two sealed waterproof
amber side marker lights, license plate bracket, 25’ wishbone trailer
harness, 48” trunk connector, mounting hardware and instructions
•Lights (bulb replacement capsules) and lens sets (tail and side)
available separately
PART #
1706-0119
1706-0120
1706-0121
1706-0122
1706-0136
DESCRIPTION
Low profile taillight kit
Taillight (left-hand)
Taillight (right-hand)
Repl. lens set
Repl. bulb capsule
SUG. RETAIL
$65.95
23.95
23.95
8.95
11.95
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
STUD MOUNT
AMBER SIDE
MARKER LIGHT
•Features a tapered base for easier installation,
built-in reflector and 18” wire lead
•Bulbs and lenses easily replaceable; use standard
automotive #1157 bulb
•Sold each
PART #
DESCRIPTION
1706-0137
Amber side marker light
OVAL
TAILLIGHT KIT
CABLES
SUG. RETAIL
$6.95
1706-0127
•Waterproof design
performs stop, turn and taillight functions
•Virtually indestructible sonically sealed lens
and housing unit has shock-mounted dual
filament bulb
•Kit contains light, grommet and three-way plug 1706-0126
•Light available separately
•Sold each – order two kits or two lights to have one for each side
PART #
1706-0126
1706-0127
DESCRIPTION
Light kit
Light only
SUG. RETAIL
$15.95
12.95
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
ROUND MARKER
AND CLEARANCE
LIGHTS FOR TRAILERS
TIRES,
TUBES &
WHEELS
•Lens is sonically welded to housing to form
1706-0128
a waterproof module
•2” light meets requirements for both side marker 1706-0129
light and clearance lamp if mounted at 45° angle
•Flush mounting requires use of shock mount
grommet, available separately
•Available in amber or red
1706-0130
•Sold each
HARDWARE,
CHEMICALS
& TOOLS
PART #
1706-0128
1706-0129
1706-0130
COVERS,
SECURITY
& GENERAL
All part numbers in BOLD MAGENTA are new for 2009.
DESCRIPTION
Amber
Red
Rubber grommet
SUG. RETAIL
$4.95
4.95
1.95
1231
SECTION
21
2060-0087
2060-0088
WINDSHIELDS
TOURING
2060-0081
2060-0082
2060-0086
2060-0085
2060-0089
LUGGAGE
2060-0118
SEATS &
SISSY BARS
2060-0177
TRAILER LED BRITE LITES
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
2060-0120
2060-0119
•Work with any enclosed, open, steel and aluminum trailer
•Hi-output LEDs are made with the highest quality LED components and have built-in reflectors
•Work with rubber gasket or metal bezel mounts
•All units are waterproof sealed
•Replaces any standard trailer light
•DOT/SAE approved
•Sold each
DESCRIPTION
Oval 13 LED, red
Oval 13 LED, amber
Round 2” 8 LED, red
Round 2” 8 LED, amber
Round 2.5” 10 LED, red
Round 2.5” 10 LED, amber
Rectangle 13.5” 13 LED dual function, red
PART #
2060-0081
2060-0082
2060-0083
2060-0084
2060-0085
2060-0086
2060-0118
SUG. RETAIL
$19.95
19.95
7.95
7.95
7.95
7.95
39.95
DESCRIPTION
Rectangle 6” 6 LED, red w/ clear lens
Rectangle 5” 8 LED, red w/ clear lens
Rectangle 3.75” 12 LED, red
Rectangle 3.75” 12 LED, amber
Rectangle 3 LED, red
Rectangle 3 LED, amber
Rectangle 3 LED, clear
PART #
2060-0119
2060-0177
2060-0120
2060-0121
2060-0087
2060-0088
2060-0089
SUG. RETAIL
$19.95
29.95
16.95
16.95
7.95
7.95
9.95
GASKETS
& SEALS
WATERPROOF
TRAILER LIGHT KITS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
2010-0351
•SAE/DOT/FMVSS/
CMVSS approved
•Contains two stud-mount
taillights with red side
markers and reflectors,
license plate bracket, 25’
wiring harness and all
necessary hardware
•Replacement lights and
lenses sold separately
•Dimensions 49/16” x 49/16”
PART #
LED
2010-0344
2010-0345
2010-0346
STANDARD
2010-0351
2010-0344
2010-0354
DESCRIPTION
SUG. RETAIL
Trailer light kit
Right (passenger side) repl. light
Left (driver side) repl. light
$109.95
44.95
49.95
Trailer light kit
46.95
PART #
DESCRIPTION
STANDARD (CONT)
2010-0352
Right (passenger side) repl. taillight
2010-0353
Left (driver side) repl. taillight
REPLACEMENT LENSES
2010-0354
Side marker repl. lens kit
2010-0355
Taillight repl. lens kit
2010-0358
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
2040-0396
REPLACEMENT SIDE MARKERS
AND REFLECTORS
2040-0400
•DOT/SAE/FMVSS/CMVSS approved
•Side markers use snap-in installation
•Reflectors use self-adhesive and two screw
holes for installation
2040-0398
PART #
DESCRIPTION
SUG. RETAIL
OVAL SIDE MARKER LIGHTS (4” X 21/16”)
2010-0358 Amber (ea.)
$3.95
2010-0359 Red (ea.)
3.95
2040-0399
PART #
DESCRIPTION
SUG. RETAIL
RECTANGULAR REFLECTORS (43/8” X 11/8”)
2040-0396 Red (pr.)
$3.95
2040-0397 Amber (pr.)
3.95
PART #
DESCRIPTION
SUG. RETAIL
ROUND REFLECTORS (3”)
2040-0398 Red (pr.)
$1.95
2040-0399 Amber (pr.)
1.95
2040-0400 18” reflector strip (8-pk.)
31.95
2010-0356
OVAL STOP/TAIL/TURN SIGNAL LIGHT KIT
HARDWARE,
CHEMICALS
& TOOLS
1232
3.95
5.95
2010-0359
TIRES,
TUBES &
WHEELS
COVERS,
SECURITY
& GENERAL
$11.95
11.95
2040-0397
TANKS &
OIL FILTERS
DASHES
& GAUGES
SUG. RETAIL
•DOT/SAE/FMVSS/CMVSS approved
•Single 4” polycarbonate housing/lens features rubber grommet and standard 3-pin pigtail
•Sealed flush mount
•6” long
•Replacement light sold separately
2010-0357
PART #
2010-0356
DESCRIPTION
Light kit
SUG. RETAIL
$12.95
PART #
2010-0357
All part numbers in BOLD MAGENTA are new for 2009.
DESCRIPTION
Repl. light
SUG. RETAIL
$8.95
SECTION
21
WINDSHIELDS
TOURING
LUGGAGE
2010-0341
SEATS &
SISSY BARS
2010-0347
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
AERO PRO OVER 80”
TRAILER LIGHT KIT
TRANSMISSION
& DRIVELINE
•SAE/DOT/FMVSS/CMVSS approved
•LED or Standard-style waterproof kits
•Contains two universal mount taillights with red side
markers and reflectors,
two seated amber side markers, license bracket, 25’ wiring harness
and all necessary hardware
•Dimensions 77/8” x 31/4”
•Replacement lights and lenses sold separately
PART #
LED
2010-0341
2010-0342
2010-0343
STANDARD
2010-0347
DESCRIPTION
GASKETS
& SEALS
SUG. RETAIL
Trailer light kit
Right (passenger side) repl. LED light
Left (driver side) repl. LED light
$136.95
49.95
56.95
Trailer light kit
PART #
DESCRIPTION
STANDARD (CONT)
2010-0348
Right (passenger side) repl. light
2010-0349
Left (driver side) repl. light
LENS
2010-0350
Repl. side and taillight lens kit
SUG. RETAIL
ELECTRICAL
$16.95
17.95
6.95
LIGHTING
63.95
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
2010-0362
TANKS &
OIL FILTERS
2010-0364
2010-0361
DASHES
& GAUGES
4-WAY TRAILER WIRING HARNESSES
•Split wishbone four-conductor harness and extension
PART #
2010-0361
2010-0364
2010-0362
2010-0363
DESCRIPTION
4’ wishbone 4-way trunk connector
18” wishbone 4-way trailer wiring harness
25’ wishbone 4-way trailer wiring harness
4’ 4-way extension
SUG. RETAIL
$5.95
4.95
20.95
9.95
2010-0363
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
7- TO 5-WAY TRAILER
ADAPTER CABLE
•SAE/DOT/FMVSS/CMVSS approved
•7-round (blade) to 5-flat female adapter
•Features 16” lead
•Links vehicle wiring system to trailer
wiring system; fits most RVs, trucks,
SUVs and other vehicles
•23” long
PART #
2010-0360
FRAMES,
SUSPENSION
& FENDERS
HARDWARE,
CHEMICALS
& TOOLS
LICENSE PLATE BRACKET
•Black rust-proof license plate bracket
DESCRIPTION
Trailer adapter cable
SUG. RETAIL
$15.95
PART #
2030-0206
All part numbers in BOLD MAGENTA are new for 2009.
DESCRIPTION
SUG. RETAIL
License plate bracket
$3.95
COVERS,
SECURITY
& GENERAL
1233
SECTION
21
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
4010-0131
ROADLOK® DEFENDER™
LOCKING SYSTEM BY JAYBRAKE
4010-0129
•Unique motorcycle locking system which
prevents the motorcycle from moving and
cannot cause damage if you forget
to unlock it before trying to ride
•Permanently mounts between front fork
and brake caliper; will not hinder braking
•Billet aluminum construction
•BrakeBolt™ hardened stainless steel locking pin
•ABLOY® EXEC locking mechanism
•Two RoadLoK® specific keys (prevents
unauthorized duplication)
•ReKey™ secure key replacement program
•Features theft-deterrent lanyard, dome decal, all
necessary mounting hardware and installation instructions
•100% made in the U.S.A.
DESCRIPTION
POLISHED
06-09 FXD/FXDWG, VRSCA/B/D/R
00-09 models (except Springer, 06-09
Dyna/V-Rod, Screamin’ Eagle models)
84-99 models (except Springers)
CHROME
06-09 FXD/FXDWG, VRSCA/B/D/R
00-09 models (except Springer, 06-09
Dyna/V-Rod, Screamin’ Eagle models)
84-99 models (except Springers)
RIGHT
LEFT
4010-0140
4010-0142
SUG. RETAIL
4010-0123 4010-0135
$290.95
4010-0127 4010-0139
4010-0131 4010-0143
290.95
290.95
4010-0124 4010-0136
310.95
4010-0128 4010-0140
4010-0132 4010-0144
310.95
310.95
DESCRIPTION
BLACK SATIN ANODIZED
06-09 FXD/FXDWG, VRSCA/B/D/R
00-09 models (except Springer, 06-09
Dyna/V-Rod, Screamin’ Eagle models)
84-99 models (except Springers)
CLEAR SATIN ANODIZED
06-09 FXD/FXDWG, VRSCA/B/D/R
00-09 models (except Springer, 06-09
Dyna/V-Rod, Screamin’ Eagle models)
84-99 models (except Springers)
RIGHT
LEFT
SUG. RETAIL
4010-0125 4010-0137
$290.95
4010-0129 4010-0141
4010-0133 4010-0145
290.95
290.95
4010-0126 4010-0138
290.95
4010-0130 4010-0142
4010-0134 4010-0146
290.95
290.95
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
MAX60 U-LOCK
•Short-shackle disc U-lock
•Features three flat keys
with one key equipped
with a mini flashlight, and
a durable PVC sleeve covers
the chrome shackle to
prevent marring and scratching
•The hardened solid steel lock
prevents prying, sawing and hammer impacts
•Ideal for motorcycles, spare tires, trailers, ATVs,
snowmobiles and watercraft
PART #
4010-0072
DESCRIPTION
Max60 U-lock
•For use on
motorcycle
discs and
looped cables
•The strongest
short-shackle
locks available
REMINDER
CABLE
•Dual-loop
reminder cable
for disc locks
PART #
4010-0008
DESCRIPTION
48” reminder cable
SUG. RETAIL
$7.95
PART #
4010-0057
4010-0058
4010-0058
DESCRIPTION
Black, Max 40
Yellow, Max 40
SUG. RETAIL
$29.95
29.95
ULTRA MAX SUPER STRENGTH U-LOCKS
CABLES
BRAKES
TANKS &
OIL FILTERS
SUG. RETAIL
$34.95
4010-0057
ULTRA-HIGHSECURITY
DISC/CABLE
LOCKS
4010-0003
4010-0004
•Ultra-Max 90 maximum security lock features hardened-chromoly construction with an oversized 16mm shackle;
Max 80 is ideal for most motorcycle or bicycle applications and uses a 14mm shackle
•Ultra-Max 90 is constructed from hardened chromoly steel and features an exclusive dual shear plate
locking mechanism
•Dual-case bolt lock withstands more than 6.5 tons of pull force; shackle can withstand more than 8,000 lb.
of expansion force
•Shackle length and width specifically designed for motorcycles; hardened chromoly lock body
•Max 80 features a hardened lock body
•Both feature locking mechanisms placed in the center of a hardened-chromoly crossbar for maximum strength,
7-pin tubular pick- and drill-resistant lock cylinders
and ballistic-grade polymer lock body
PART #
DESCRIPTION
SUG. RETAIL
housings to resist hammer strikes and
4010-0003
Max 80 (14mm)
$32.95
scratching of painted surfaces
4010-0004
Max 90 (16mm)
55.95
•Shackles have protective PVC skins
DASHES
& GAUGES
4010-0010
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
GLADIATOR SERIES
ARMORED CABLES
HARDWARE,
CHEMICALS
& TOOLS
•High-strength Trimaflex quadra braid cable with
PVC protective coating to prevent surface scratching
•Lock mechanisms are covered in rugged plastic for durability and
trouble-free use
•Indestructible maximum-security
armor-plated cable locks
•Plastic-covered braided stainless
steel covers with patented hardened
armor-plated steel cups that repel
saw cuts and bolt cutters
•Flexible for easy transport
•Ballistic grade polymer lock housing
cover resists hammer strikes; protects lock mechanism
•Patented key cover resists grime and moisture
COVERS,
SECURITY
& GENERAL
PART #
4010-0015
4010-0016
4010-0017
PART #
4010-0010
4010-0011
4010-0012
TIRES,
TUBES &
WHEELS
1234
4010-0017
4010-0015
4010-0016
TRIMAFLEX® COILED CABLE LOCKS
DESCRIPTION
72” cable w/ U-lock
72” cable w/ combination lock
72” cable w/ quick-release lock
SUG. RETAIL
$43.95
17.95
17.95
All part numbers in BOLD MAGENTA are new for 2009.
DESCRIPTION
48” x 26mm dia.
72” x 26mm dia.
32” x 22mm dia.
4010-0011
SUG. RETAIL
$50.95
59.95
29.95
SECTION
21
WINDSHIELDS
4010-0028
TOURING
VERSA
CABLE LOCK
•Multi-use versa
cable lock
•Trimaflex cable
with locking
cinching feature
•10’ x 10mm
PART #
DESCRIPTION
4010-0071
Versa cable
LUGGAGE
ULTRA-MAX T-HEX™ SUPER CHAIN
SUG. RETAIL
$25.95
•Hexagonal-shaped, case-hardened and triple heat-treated;
withstands over 6 tons of pulling force and 11 tons of cutting force
•Durable Nylonex™ sleeve protects against scratches
•Chain sold separately or with Tri-Max® U-lock or integrated lock
•Chains with integrated locks feature noose link so chain can be looped
PART #
4010-0026
4010-0027
4010-0028
4010-0029
4010-0059
4010-0060
4010-0049
4010-0073
4010-0074
•Feature 10’ X 10mm, 48” and 72” Trimaflex™
ultra-tough braided cable and flat keys
•Great for use on bikes, bike carriers, trailers or watercraft on the beach
4010-0073
4010-0074
DESCRIPTION
3’ T-Hex chain
5’ T-Hex chain
3’ T-Hex chain w/ U-lock
5’ T-Hex chain w/ U-lock
36” / 8mm T-Hex chain w/ integrated lock
36” / 10mm T-Hex chain w/ integrated lock
DESCRIPTION
10’ x 10mm cable w/ resettable
combination MAG series lock
48” cable lock
72” cable lock
PART #
4010-0050
DESCRIPTION
Lock w/ retractable cable
$21.95
39.95
45.95
RESETTABLE
COMBINATION
PADLOCKS
SUG. RETAIL
$21.95
4010-0001
•Rugged weather-resistant PVC housing
covers laminated solid-brass lock body
•Dual locking 11/8” x 5/16” dia. hardened shackle
PART #
DESCRIPTION
4010-0001
Single padlock
4010-0002
Set of three keyed-alike padlocks
4010-0019
DESCRIPTION
1.25” x 5/16” dia. shackle
2.25” x 5/16” dia. shackle
ELECTRICAL
SUG. RETAIL
$19.95
19.95
4010-0023
4010-0024
BRAKES
DESCRIPTION
50mm square body, 1.25” x 10mm shackle
50mm square body, 2.25” x 10mm shackle, rekeyable
64mm round body, 1.25” x 11mm shackle, rekeyable
64mm round body, 2.25” x 11mm shackle, rekeyable
SUG.
RETAIL
$19.95
19.95
24.95
24.95
TRIMAFLEX™ MAX SECURITY BRAIDED CABLES
•Quadra-braid cables
•Available with integrated lock or for use with Tri-Max® disc and U-locks
DESCRIPTION
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
4010-0053
4010-0052
PART #
W/ KEYED CABLE LOCK
4010-0013
4010-0014
DUAL-LOOP CABLES
4010-0052
4010-0053
4010-0054
4010-0055
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
•Hardened-chrome
steel padlocks
•Commercial grade
•Ideal for enclosed
trailers, forks, cases
with T-Hex™ chain
and cargo boxes
PART #
4010-0021
4010-0022
4010-0023
4010-0024
4010-0014
ENGINE
LIGHTING
MAXIMUM
SECURITY
PADLOCKS
SUG. RETAIL
$9.95
23.95
FUEL/AIR
SYSTEMS
4010-0018
4010-0022
WEATHER-PROOF PADLOCK
EXHAUST
GASKETS
& SEALS
•Easy-to-use,
resettable
combination padlocks
feature 2” W solid
brass bodies and
hardened shackles
PART #
4010-0018
4010-0019
SEATS &
SISSY BARS
TRANSMISSION
& DRIVELINE
•Rugged three-digit resettable combination lock
•36” L x 4mm dia. retractable cable
SUG. RETAIL
4010-0002
4010-0013
SUG. RETAIL
$47.95
59.95
73.95
85.95
45.95
38.95
RETRACTABLE CABLE LOCK
MULTI-USE CABLE LOCKS
PART #
4010-0049
4010-0060
4010-0026
SUG. RETAIL
32” x 15mm
72” x 15mm
$24.95
32.95
30’ x 10mm
15’ x 10mm
12’ x 12mm
8’ x 15mm
28.95
17.95
17.95
17.95
4010-0020
4010-0025
STAINLESS STEEL HIGH-SECURITY SHIELDED PADLOCKS
•70mm round padlock with 10mm hardened shackle and exclusive
armor-plated key core for additional security, and ultra-high security
27/8” lock with solid steel body and hidden 3/8” dia. internal shackle
•Ideal for enclosed trailers, forks, cases with T-Hex™ chain and
cargo boxes
PART #
4010-0020
4010-0025
DESCRIPTION
70mm stainless steel round padlock
27/8” solid steel body padlock
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$15.95
32.95
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1235
SECTION
21
WINDSHIELDS
20-UNIT PROVOGUE 300/305
LOCK COUNTER PRE-PACK
4010-0109
TOURING
•Includes 10 Provogue 300 locks (two
in each color) and 10 Provogue
305 locks (two in each color)
•Bonus $35-value Provogue 300 lock in
gunmetal chrome (PART #9903-0209)
included when pre-pack is purchased
•Sold each
SUG.
PART #
DESCRIPTION
RETAIL
4010-0122 20-unit Provogue
300/305 lock
counter pre-pack $54.95 (ea.)
9903-0209 Provogue
300 chrome
promo lock
54.95
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1236
4010-0108
GRANIT VICTORY
X-PLUS 68 BRAKE
DISC LOCKS
4010-0110
•For up to 8mm thick brake discs
•ABUS-X-Plus locking system for extremely
high protection against unlawful opening
•Disc memory reminds you to detach lock
before starting
•Includes lighted key
•Optional carrier available separately
PART #
4010-0108
4010-0109
4010-0110
4010-0119
4010-0120
DESCRIPTION
Black brake disc lock
Yellow brake disc lock
Carrier
GRANIT QUICK
MAXI AND MINI
BRAKE DISC LOCK
SUG. RETAIL
$116.95
116.95
31.95
4010-0105
4010-0112
•Special hardened steel construction
•Locking system features all-around
drill protection
•ABUS-Plus locking system for
extremely high protection against
unlawful opening
•Includes disc memory to prevent
forgetting lock in brake disc
•Manual cylinder cover
•Available in yellow
PART #
4010-0105
4010-0106
4010-0113
4010-0106
DESCRIPTION
70mm Maxi
53mm Mini
SUG. RETAIL
$144.95
130.95
ELECTRONIC
GRANIT DETECTO
800 BRAKE DISC LOCK
4010-0111
PROVOGUE 300 AND 305 BRAKE DISC LOCKS
•Electronic brake disc lock with
a 14mm hardened bolt
•3-D position control for immediate
alarm when position changes or
shocks are detected
•High-quality steel lock has ABUS X-Plus
locking for extreme protection against unlawful opening
•Includes batteries
PART #
DESCRIPTION
4010-0104
Electronic Granit Detecto 800 brake disc lock
•Small, handy, compact and secure
•Easy one-hand operation
•Impact-resistant solid cast metal with a shiny metal finsh or colored
rubberized surface
•Hardened alloy steel locking bolt: 10mm for Provogue 300 and 5mm
for Provogue 305
SUG. RETAIL
$247.95
STRADA 34 MINI BRAKE DISC LOCK
•Small (50mm), handy, compact and secure
•Special hardened steel construction
•All-around drill protection
•Double-bolted shackle
•Disc memory reminds you to detach the lock
before starting
•ABUS EXTRA-Class cylinder with symmetrical
dimple key
SUG.
PART #
DESCRIPTION
RETAIL
4010-0107 Strada 34 mini brake disc lock
$93.95
WBA 100 LOCK ANCHOR
•16mm hardened steel shackle for extreme
resistance against theft
•Indoor/outdoor use on floor or walls
•Flat shape and high-quality materials allow
anchor to be driven over in fixed position
•Includes hardware
•Sold each
SUG.
PART #
DESCRIPTION
RETAIL
4010-0121
WBA 100 lock anchor
$112.95
PART #
300
4010-0116
4010-0117
4010-0118
4010-0119
4010-0120
DESCRIPTION
SUG.
RETAIL
White
Red
Chrome
Gold
Black
$54.95
54.95
54.95
54.95
54.95
PART #
305
4010-0111
4010-0112
4010-0113
4010-0114
4010-0115
•Special hardened chain protects
against theft from even the most
aggressive mechanical attacks
•Chain link locks directly into lock
•Extreme resistance against
pulling link out of lock
•ABUS-X-Plus locking system
includes more than one
million key variations
•Textile cover prevents scratches
All part numbers in BOLD MAGENTA are new for 2009.
SUG.
RETAIL
White
Red
Chrome
Gold
Black
$45.95
45.95
45.95
45.95
45.95
Textile cover
prevents
scratches
GRANIT
EXTREME
PLUS 59
CHAIN LOCKS
PART #
4010-0090
4010-0091
DESCRIPTION
DESCRIPTION
66” x 12mm
55” x 12mm
4010-0090
SUG. RETAIL
$523.95
466.95
SECTION
21
WINDSHIELDS
GRANIT CITY X-PLUS
1060 CHAIN LOCKS
GRANIT DETECTO
ELECTRONIC CHAIN
LOCK/BRAKE DISC LOCK
•Combines famous ABUS disc brake
lock with a hardened 47” x 12mm chain
•Electronic brake disc lock features
14mm special hardened bolt
•High-quality steel lock can be used without chain
•3-D position control for immediate alarm when
position changes or shocks are detected
•ABUS X-Plus locking system
•Includes batteries
PART #
4010-0097
DESCRIPTION
Electronic chain lock/brake disc lock
SUG. RETAIL
$362.95
•10mm hexagonal chain is as
hard as granite with a high
resistance to cutting,
pulling and torsion
•ABUS Power Cell technology
locks chain directly into lock body
•Interlocked lock housing protects
against the most determined attacks
•ABUS X-Plus cylinder for high-picking protection
•Automatic keyhole cover
PART #
DESCRIPTION
4010-0094
66” x 10mm
4010-0095
55” x 10mm
4010-0096
43” x 10mm
TOURING
LUGGAGE
4010-0095
SEATS &
SISSY BARS
SUG. RETAIL
$222.95
213.95
195.95
EXHAUST
FUEL/AIR
SYSTEMS
GRANIT VICTORY
X-PLUS 68 CHAIN LOCK
•Combines famous ABUS brake disc
lock with 18” x 12mm hardened steel chain
•Steel brake disc lock can be used separately
•ABUS X-Plus locking system for the highest
protection against unlawful opening
•Includes lighted key and memory cable
PART #
DESCRIPTION
4010-0098
Granit Victory X-Plus 68 chain lock
CITYCHAIN 1010
CHAIN LOCK
SUG. RETAIL
$196.95
•Hardened 55” x 9mm chain
with a robust textile webbing
•ABUS-Plus cylinder for high picking protection
•Automatic keyhole cover
PART #
DESCRIPTION
4010-0099
Citychain 1010 chain lock
ENGINE
SUG. RETAIL
$166.95
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
4010-0092
PLATINUM 34 CHAIN LOCKS
•Hardened 10mm square chain with fabric sleeve
•High-quality ABUS padlock for
all-around protection
•Lock features a hardened shackle and body,
plus extra shackle guard to protect against bolt
cutter and sawing attacks
PART #
4010-0092
4010-0093
DESCRIPTION
78” x 10mm
55” x 10mm
WINNER CHAIN 92 CHAIN LOCK
SUG. RETAIL
$166.95
146.95
•Strong 55” x 8mm hardened square chain
•Lock features hardened shackle for extra
protection against brutal attacks
PART #
DESCRIPTION
4010-0100
Winner chain 92 chain lock
ELECTRICAL
SUG. RETAIL
$97.95
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
4010-0101
STEEL-O-FLEX
900 CABLE LOCKS
CABLES
•Compact, flexible and secure
•Hardened steel shells around a
strong 27mm Steel-O-Flex cable
•ABUS high-quality five-pin cylinder
PART #
DESCRIPTION
4010-0101
66” x 27mm
4010-0102
39” x 27mm
CENTURO 860 CABLE LOCK
SUG. RETAIL
$102.95
77.95
•Hardened steel shells protect
flexible 43” x 19mm steel cable
•ABUS cylinder features a self-locking mechanism
PART #
DESCRIPTION
4010-0103
Centuro 860 cable lock
BRAKES
SUG. RETAIL
$48.95
1703-3000
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
•Secures a padlock on the motorcycle
when it’s not being used
•No drilling required; simply use an existing bolt hole
•Install on the forward frame yoke below the steering pin, on one
of the highway peg mounting plate bolts or even on some sissy bar
bolts on rubber-mounted chassis
•Installation on a rigid mount chassis may include a forward frame yoke,
cross bracket, fork leg trim lower bolt or the upper safety bar bolt
•Polished stainless steel
•Fits H-D logo locks, Master Lock model 220 and American lock model H-10
•Patented design
•Made in the U.S.A.
PART #
DS-244012
DS-244013
FOOTRESTS
& LICENSE
PLATE FRAMES
1703-3001
LOCKSTER™ LOCK MOUNT
DESCRIPTION
Lockster only (ea.)
Master Lock model 220 only (ea.)
SUG. RETAIL
$29.95
41.95
DISC LOCK HOLDER
TIRES,
TUBES &
WHEELS
•Chrome-plated billet aluminum
•Features 3/8” or 1/2” mounting hole for various
mounting options
•Available for 31/4” long locks by 1” wide (long stlye)
or mini disc locks 2” long by 1” wide (short style)
•Sold each
PART #
1/2” MOUNTING HOLE
1703-3000
3/8” MOUNTING HOLE
1703-3001
DESCRIPTION
SUG. RETAIL
Long style
$36.95
Short style
36.95
All part numbers in BOLD MAGENTA are new for 2009.
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1237
SECTION
21
WINDSHIELDS
TOURING
4010-0151
4010-0155
4010-0152
4010-0156
4010-0154
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
DISC LOCKS
•State-of-the-art disc locks feature dual motion and shock sensor
that trigger a 110 dB warning siren when bike is disturbed
•High-security key and barrel
•No switches to think about: arms and disarms automatically
•Include travel case, keys and pouch
4010-0080
4010-0076
4010-0065
XX-6/XZN-6/XZZ-6
XX-10/XX-14
XH-14
XN-18
•Ideal for smaller bikes
and scooters
•High-nickel-content stainless
steel body
•Push-down locking system
•Ice spray-proof body and
key barrel
•XZZ model features painted
yellow body
•1.7” (42mm) of throat
•0.24î (6mm) dia. hardened-steel
locking pin
•New design with a flared, attackresistant body shape
•High nickel-content stainless-steel
mono-block construction
•The shorter, squatter body gives
it a sport and streetbike-oriented
fit profile
•XX-10 features 1.92” (48mm)
of throat with 0.4î (10mm) dia.
carbide-reinforced hardenedsteel locking pin
•XX-14 features 1.6” (41mm) of
throat with 0.5î (14mm) dia.
carbide-reinforced hardenedsteel locking pin
•Features inert-gas-hardened
steel construction
•Double-barrel locking system
•1.84” (46mm) of throat
•0.5” (14mm) dia. double
locking pin
•Features re-inforced
carbide substructure
•120 dB warning siren
•Flashing blue LED armed signal
•Fortified barrel with
carbide underpinning
•Four-pin locking system
•Fully removable unique key barrel
•2.6” (65mm) of throat
•0.72” (18mm) dia. locking pin
PART #
XX-6
4010-0151
4010-0152
XZN-6
4010-0155
XZZ-6
4010-0156
DESCRIPTION
SUG. RETAIL
Stainless/yellow
Stainless
$84.95
89.95
Yellow
79.95
Stainless
84.95
LIGHTING
PART #
XX-10
4010-0153
XX-14
4010-0154
XH-14
4010-0076
XN-15
4010-0065
XN-15
•Features high-nickel-content
stainless steel body
•Double-barrel locking system
•2.56” (64mm) of throat
•0.5” (14mm) dia. locking pin
DESCRIPTION
Yellow
SUG. RETAIL
$105.95
Stainless
114.95
Black/yellow
99.95
Stainless
PART #
DESCRIPTION
XN-18
4010-0080 Carbide
REPLACEMENT BATTERY
4010-0075 For all lock models
(except XN18) (ea.)
(comes in 6 pk)
SUG. RETAIL
$199.95
6.95
109.95
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
CLAW ADAPTOR
XV CABLE LOCK
•Lets you lock a chain with your Xena
disc-lock alarm
•Ideal for use with Xena or other generic chain
•Perfect for ground anchoring bike or other vehicle
•Stainless steel construction
•High-security high-tensile steel cable for
use with all Xena locks, except XN18
•61/2’ L
•Disc lock not included
PART #
4010-0083
DESCRIPTION
XV cable lock
SUG. RETAIL
$69.95
PART #
4010-0088
DESCRIPTION
For XE15/XN15 disc lock
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1238
CYCLE ALARM WITH
REMOTE TRANSMITTER
•Powerful five-tone 120 dB piezo siren
•Remote transmitter operation
•Adjustable shock sensor with seven levels of sensitivity to match your surroundings
•Programmable five-tone siren allows you to pick the siren tone you want
•Warn-away mode sounds warning prior to full alarm activation
•100% waterproof
•Panic feature enables you to activate the alarm siren from up to 100’ away
•Includes everything needed for a simple under-20-minute installation
PART #
4020-0019
DESCRIPTION
Cycle alarm w/ remote transmitter
SUG. RETAIL
$114.95
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$44.95
SECTION
WINDSHIELDS
SR-i900 RFID MOTORCYCLE SECURITY SYSTEM
•The SR-i900R is a new generation two-way FM security system offering hands-free RFID technology
•Simply walk towards or away from your bike, and the remote transceiver will automatically
communicate an arm or disarm command using its proximity recognition system
•This unique auto-arm and hands-free disarm operation provides the highest standard
of security and convenience
•Standard features include:
•RF-ID for hands-free operation
•Programmable auto or manual arming and disarming
•Long-range FM transceiver (up to a 1/2 mile)
•Range and signal status display
•Compact design (311/16” x 23/4” x 7/8”)
•Dual-axis accelerometer for detecting impact/inclination
•Built-in 120 dB multi-tone siren with soft chirp
•Sensor violation display
•Audible/vibrating alert
•Remote motorcycle finder/panic alarm
•Programmable perimeter sensor with warn away that detects motion around the bike, protecting saddlebags,
luggage and accessories
•Built-in battery backup system allows the pager to operate even if wires are cut or circumvented
•Ignition disable feature allows the user to remotely cut off the engine in case of hijack
•Factory connector kits allow the alarm system to be integrated into the OEM-style harness without any cutting
or splicing (sold separately)
PART #
4020-0052
21
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
DESCRIPTION
SR-i900 RFID security system
SUG. RETAIL
$439.95
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
4020-0048
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
4020-0034
BRAKES
TANKS &
OIL FILTERS
SR-i600 SERIES TWO-WAY FM
TRANSCEIVER-CONTROLLED MOTORCYCLE ALARMS
•Ultra-compact two-way FM security system with waterproof remote
•Include a handheld LCD transceiver that features both pager and
remote functions
•Transceiver constantly monitors and displays the current alarm status and confirms all
commands with easy-to-understand icons and text
•From up to 1/2 mile away, the two-way remote allows the user to control all of the alarm
functions as well as receive detailed information on the motorcycle’s status
•Two-axis digital accelerometer detects both impacts and inclination; module can be placed
in any position or mounting angle and requires no adjustments
•Include a built-in 120 dB programmable multi-tone siren with soft chirp arm/disarm feature
•Other standard features include: audible/vibrating alert, smart battery safeguard, sensor
violation display, range and signal status display, clock with alarm, motorcycle battery condition
display, rolling codes, ignition sensor, flashing light with memory, key lock and remote motorcycle finder
•PART #s 4020-0049, 4020-0034 and 4020-0048 also features a programmable perimeter sensor that detects
motion around the bike, protecting saddlebags, luggage, etc., and a built-in battery backup system that
allows the alarm to function even if battery wires are cut
•PART # 4020-0050 also features an anti-hijack/ignition disable module that allows the user to remotely cut off
the engine in case of a hijack situation
•Factory connector kits allow the alarm system to be integrated into the OEM-style harness without any
cutting or splicing (sold separately)
PART #
4020-0049
4020-0034
DESCRIPTION
SR-i600 two-way FM alarm w/
silver/orange remote
SR-i600S two-way FM alarm w/ silver/orange
remote, perimeter sensor module and
battery back-up
SUG. RETAIL
PART #
4020-0048
$319.95
4020-0050
389.95
DASHES
& GAUGES
DESCRIPTION
SR-i600SB two-way FM alarm w/ black remote,
perimeter sensor module, and battery back-up
SR-i600SE two-way FM alarm w/ silver/orange
remote, anti-hijack/ignition disable module,
perimeter sensor module, and battery back-up
All part numbers in BOLD MAGENTA are new for 2009.
FRAMES,
SUSPENSION
& FENDERS
4020-0049
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
SUG. RETAIL
$389.95
399.95
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1239
SECTION
21
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
SR-C400 SECURITY SYSTEM
•Two-way FM technology incorporates a small LED transceiver and
ultra-compact module
•Long-range FM transceiver with a range of up to 1/2 mile
•Built-in 120 dB siren with soft chirp
•Dual-axis accelerometer for detecting impact/inclination
•Sensor violation notification; range confirmation status
•Audible/vibrating alert; remote motorcycle finder/panic alarm
•Smart battery safeguard with motorcycle battery condition display
•Built-in battery backup system that allows the pager and siren to operate even if wires
are cut or circumvented
•Optional programmable perimeter sensor with warn away that detects motion around
the bike, protecting saddlebags, luggage and accessories (sold separately)
•Factory connector kits allow the alarm system to be integrated into the OEM-style
harness without any cutting or splicing (sold separately)
PART #
DESCRIPTION
SUG. RETAIL
4020-0031
SR-c400 security system
$329.95
OEM500i FACTORY PLUG-IN
ONE-WAY SECURITY SYSTEM
•Two-axis digital accelerometer detects both impacts and
inclination with an extremely high degree of accuracy;
module can be placed in any position or mounting angle
and requires no adjustments
•120 dB siren with soft chirp arm/disarm feature
•Remote transmitter with rolling code feature
•Optional anti-hijack kit and perimeter sensor
sold separately
•Factory connector kits allow the alarm system to be
integrated into the OEM-style harness without any cutting
or splicing (sold separately)
PART #
4020-0003
DESCRIPTION
OEM500i factory plug-in
security system
SUG. RETAIL
$139.95
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
4020-0051
4020-0041
CABLES
BRAKES
HD-1
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1240
ACCESSORIES AND FACTORY CONNECTOR KITS
•Connector kits allow all Scorpio alarms to be integrated into the OEM-style harness
without any cutting or splicing
PART #
DESCRIPTION
ACCESSORIES
4020-0007
Ignition disabler/anti-hijack kit for PART #S 4020-0003, 4020-0034, 4020-0048 and 4020-0049
SN-4
Perimeter sensor for PART #S 4020-0003, 4020-0031 and 4020-0049
4020-0041
Repl. or add-on silver remote tranceiver for PART #4020-0034, 4020-0048, 4020-0049 and 4020-0050
4020-0051
Repl. or add-on black remote tranceiver for PART #4020-0034, 4020-0048, 4020-0049 and 4020-0050
FACTORY CONNECTOR KITS
HD-1
97-03 XL, 97-06 Big Twin, 97-05 Touring models
4020-0022
04-06 XL
4020-0054
07 Electra Glides
4020-0032
06 Big Dog
BD-1
00-02 Big Dog
IND-1
99-01 Indian Chief, and all Scout and Sprint
4020-0009
02-03 Indian Chief
4020-0053
07 American Iron Horse
4020-0008
00-06 American Iron Horse
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$29.95
49.95
99.95
99.95
24.95
24.95
24.95
25.95
24.95
24.95
24.95
49.95
24.95
SECTION
21
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
4405-0095
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
4405-0096
HANDLEBAR MOUNTED SPEAKER SYSTEM
•Play music on bikes with 7/8”, 1” or 11/4” diameter handlebars
•Uses your MP3 player, satellite radio receiver or similar portable
audio device
•2” custom designed speakers in chromed “bullet” cabinets
•Includes a 50W “hide-able” amplifier with MAXXBASS®
•Digital volume control is built into the system
•Charge your audio device or cell phone with the USB Port
•Comes with a customizable clear sleeve for the speaker cabinets
•Universal audio input from headphone jacks
•Requires 12V negative ground charging system with battery
PART #
DESCRIPTION
SUG. RETAIL
4050-0034
Handlebar mounted speaker system
$399.95
TRANSMISSION
& DRIVELINE
ULTRASOUND™ COMPLETE REAR SPEAKER KIT
•Non-Ultras get “The Sound Of An Ultra” by adding this rear speaker kit
•Kit includes two speakers, rear speaker boxes, 24 watt x 2 (RMS) amp,
wiring harness, grilles, and all required mounting hardware
•Supplied speakers go in front and run off amp, stock speakers or second
set of Hogtunes move to back and run using radio power
•Built-in quick-release plug for easy Tour Pak® removal
•Road Glide adapter kit PART #4405-0096 is required to put amp
in Road Glides
•Road Glide adapter kit comes with amp plate, extended wire harness,
and all required mounting hardware
PART #
DESCRIPTION
SUG. RETAIL
98-09 FLHT, FLHX AND FLTR MODELS WITH FACTORY
SOUND SYSTEM AND KING TOUR-PAK®
4405-0095
Ultrasound rear speaker kit
$499.95
4405-0096
Road Glide adapter kit
39.95
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
4405-0134
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FAIRING LOWER SPEAKER KITS
•PART #4405-0134 for use on bikes with fairing lowers. Radio runs all
existing speakers, and supplied amp runs fairing lower speakers. Includes
Hogtunes amp, one pair of Hogtunes speakers, fairing lower speaker
adapters, and plug and play harness. NOT compatible with any other
amplifier, does not fit FLTR lowers
•PART #4405-0133 for use on bikes with Hogtunes Ultrasound rear speaker
kit PART #4405-0095 already installed. Fairing lower speakers run off
existing amp. Includes one pair of Hogtunes speakers, fairing lower
speaker adaptors and plug-and-play harness
PART #
DESCRIPTION
SUG. RETAIL
98-09 DRESSERS W/ OEM FAIRING LOWERS (EXCEPT FLTR)
4405-0134
Amplified fairing lower speaker kit w/ amp
(except FLTR)
$379.95
4405-0133
Fairing lower speaker kit w/o amp
199.95
“3-WAY FOR THE FREEWAY”
COMPLETE 6-SPEAKER SYSTEM FOR ULTRAS
•Stock four speaker system goes to an amplified six speaker system
•Comes with fairing lower speaker adapters, three pairs of Hogtunes
speakers, Hogtunes amplifier with MAXXBASS® to power front four
speakers and all required hardware
•100% plug-and-play harness with quick-disconnects for lowers
•Fairing lower speakers angled upwards for rider and passenger
•System not compatible with any external amplifiers
PART #
DESCRIPTION
SUG. RETAIL
06-09 FLHTCU MODELS WITH HARMON/KARDON “ADVANCED AUDIO” RADIO
4405-0135
Ultrasound™ “3-way for the freeway”
complete audio system
$549.95
All part numbers in BOLD MAGENTA are new for 2009.
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1241
SECTION
21
4405-0032
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
4405-0093
FRONT AND REAR SPEAKERS
•Direct wiring using OEM connectors; no
modifications required; suitable for
98-05 models and aftermarket car radio
4405-0078
•Include custom-tooled speaker baskets
for a perfect fit and a tailored sound for
highway speeds
•Feature titanium-impregnated neodymium tweeters, ultralight polypropylene woofer cones, aluminum
voice coil formers and oversize magnet assemblies
•45W RMS/90 peaks watts
•Sold in pairs
PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
06-09 FLHT, FLHX AND FLTR MODELS WITH
98-05 FLTR, FLHT, FLHTC
HARMAN/KARDON ADVANCED AUDIO SYSTEM
4405-0032
5.75 ohm front speakers
4405-0093
2 ohm front speakers
$99.95 4405-0078
5.75 ohm rear speakers
4405-0094
2 ohm rear speakers
99.95
SUG. RETAIL
$99.95
99.95
ENGINE
TRANSMISSION RUMBLE ROAD™
& DRIVELINE ULTRA AMPLIFIED
STEREO SPEAKERS
CABLES
•Clear and powerful sound even
at highway speeds
•RCA 4” Coaxial
full-range speakers
•Built-in amplifiers and standard
stereo mini-plug
•Produces approximately 70W
4405-0160
continuous; 100W peak; into 4 OHM
at 13.6 VDC with high-gain input
•Operates with or without the
motorcycle running
•Packaged in an attractive chrome or black spotlight shell,
it does not distract from the look of the motorcycle
•Features stainless steel or black grilles and all hardware included
•Works with most portable MP3 players and other personal stereos featuring
a standard mini-plug headphone jack
•Installs easily on handlebars, spotlight mounting bars, forks or engine guards
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL PART #
4405-0160
Chrome
$369.95 4405-0161
BRAKES
RUMBLE ROAD™
PREMIUM AMPLIFIED
STEREO SPEAKERS
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1242
DESCRIPTION
Black
•High-output, high-fidelity stereo speaker system produces crisp,
powerful sound even at highway speeds
•Attractively packaged in lustrous chrome or black spotlight shells to
enhance the look of most any motorcycle
•Can be installed on handlebars, crash bars, forks or other locations
•Work with any portable MP3, personal stereo or satellite radio
•Feature standard miniplug headphone jack
4405-0001
•Approximately 32W continuous, 46W peak into 4 ohms at 13.6 VDC
•Includes two 5.25” Rumble Road amplified speakers from RCA, noise
filter, all audio cabling and power wiring and 3’ of black wire dressing
PART #
DESCRIPTION
4405-0001
Chrome w/ 1” mounting hardware
4405-0115
Chrome w/o mounting hardware
4405-0002
Black w/ 1” mounting hardware
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
4405-0161
SUG. RETAIL
$399.95
4405-0002
SUG. RETAIL
$269.95
249.95
299.95
4405-0009
4405-0017
THREE-PIECE CLAMP SET
L-BRACKET SET
•Right-angled clamps are
just the ticket for vertical mounts
or other space-defying installations of
Rumble Road™ speakers, AudioBoss™ Audio
Controller or other accessories
•Available in polished stainless
steel or black
•Sold in pairs
PART #
DESCRIPTION
4405-0017
Polished
4405-0162
Black
4405-0013
4405-0162
SUG. RETAIL
$29.95
29.95
All part numbers in BOLD MAGENTA are new for 2009.
•Perfect for mounting Rumble Road™
speakers on handlebars or engine
guard bars
•Clamps separate to slip easily over the bar
to the desired mounting location
•Sold in pairs
PART #
DESCRIPTION
SUG. RETAIL
7/8”, chrome
$19.95
4405-0009
7/8”, black
4405-0013
29.95
4405-0010
1”, chrome
19.95
4405-0014
1”, black
29.95
4405-0012
11/4”, chrome
19.95
SECTION
21
WINDSHIELDS
RUMBLE ROAD™ LIMITED NON-AMPLIFIED SPEAKERS
•Custom product for motorcycles with existing car-stereo setups
•Attractively packaged in chrome or black spotlight shells to enhance the look of most any bike
•Based on the Amplified Rumble Road Premium speaker system, the non-amplified Rumble
Road Limited is easily installed on handlebars, spotlight mounting bars, forks or crash bars
•Speakers work with any car-stereo system (either ground or bridged) to provide high-quality
sound on the go or while parked
•4 ohms at 105W peak/35W RMS
•Includes two 5.25” Rumble Road non-amplified speakers from RCA, two three-piece
1” mounting clamps in matching finish, wiring and 3’ of black wire dressing
TOURING
4405-0003
4405-0004
NOTE: The non-amplified Rumble Road Limited series requires an amplifier-equipped car stereo and is not designed for use with personal stereos.
If you plan to use a portable MP3 or other personal stereo instead of a car stereo, check out the Amplified Rumble Road Premium speaker system
PART #s 4405-0001 or 4405-0002.
PART #
4405-0003
DESCRIPTION
Chrome
SUG. RETAIL
$169.95
PART #
4405-0004
DESCRIPTION
Black
4405-0127
RCA TWO-WAY
COAXIAL SPEAKERS
•These RCA speakers are
designed with volume, clarity,
and weather-resistance in mind
•Can be used as replacements for
most factory-installed fairing speakers
and aftermarket radio housing speakers
•Sold in pairs
PART #
DESCRIPTION
4405-0126
100W 4 OHM (4”)
4405-0127
150W 4 OHM (5.25”)
EXHAUST
•Oversized, glove-friendly knob makes
it easy to control the volume
•Feel and hear the on/off switch
•High-visibility blue LED
•Crafted from precision-machined,
lightweight billet aluminum,
CrankCase measures
1.8” H x 1.7” W x 1.3” D
•Chrome-plating for sparkle and shine
•Sleek 1” mounting clamp hugs the
tube and can be placed anywhere
along it, including next to the brake
or throttle controls; removable two-piece clamp allows mounting for
handlebars measuring other than 1” standard
•Built-in fuse (5 Amps) for internal/external power, and standard electrical
hardware compatibility
•Universal line-level input with 1/8” stereo plug
•State-of-the-art, surface-mounted electronics
•Weather-resistant
PART #
4405-0070
DESCRIPTION
CrankCase audio controller
SEATS &
SISSY BARS
SUG. RETAIL
$199.95
CRANKCASE™
AUDIO CONTROLLER/
POWER SWITCH
4405-0126
LUGGAGE
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
SUG. RETAIL
$179.95
LIGHTING
SUG. RETAIL
$49.95
59.95
HANDLEBARS,
CONTROLS
& MIRRORS
ROUND ACOUSTIC BAFFLES
CABLES
•Protect your speakers from water,
rust, dust and electrical problems
•Foam basket forms a protective layer
between speaker and enclosure,
reducing resonance and other distortion
•Sold in pairs; available in round 5.25” sizing
PART #
4405-0076
DESCRIPTION
Round acoustic baffles
SUG. RETAIL
$14.95
ELECTRICAL NOISE FILTER
•Greatly attenuates electrical noise
or whine produced by some
motorcycle electrical/
ignition systems
•One filter is good for powering
both Rumble Road™ speakers in
the system
PART #
4405-0007
DESCRIPTION
Electrical noise filter
BRAKES
GROUND LOOP ISOLATOR
•Suppresses any resulting noise in the audio line for those who use their
bike’s battery to operate a personal stereo
•Breaks the ground loop that would otherwise occur between a personal
stereo and amplified speakers
•A necessary accessory for some satellite radio systems
PART #
DESCRIPTION
SUG. RETAIL
4405-0008
Ground loop isolator
$12.95
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
SUG. RETAIL
$9.95
FOOTRESTS
& LICENSE
PLATE FRAMES
IN-LINE
VOLUME CONTROLLER
TIRES,
TUBES &
WHEELS
•An economic alternative to MH
Instruments custom-designed
CrankCase™ volume
controller/power switch
•Provides remote sound-level
adjustment of personal
stereos equipped with a 1/8”
stereophone jack
•Includes a pocket/belt clip for
storage and security
PART #
4405-0163
TANKS &
OIL FILTERS
UNIVERSAL STEREO
MOUNTING KIT
•Designed for 7/8” to 1” handlebars
•Kit and stereo are easily removable with only three points of attachment
•Black hardware and clear Lucite® tray safely hold your personal stereo
DESCRIPTION
In-line speaker volume controller
SUG. RETAIL
$9.95
PART #
4405-0075
DESCRIPTION
Universal stereo mounting kit
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$39.95
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1243
SECTION
21
WINDSHIELDS
MS5006B 5.25” DUAL-CONE
MARINE-GRADE SPEAKER
TOURING
LUGGAGE
•Sensitivity: 91db
•Frequency: 79hz-20khz
•Nominal impedance: 4 ohms
•Polypropylene woofer: 51/4”
•Magnet: 2.9 oz.
•Mounting hole diameter: 41/2”; mounting depth: 11/2”
•Tweeter type: mylar whizzer
•Max power handling: 30W
4401-0046
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
PART #
4405-0153
MSR3007
SIRIUS-READY
AM/FM/CD STEREO/
FULL iPOD CONTROLS
SUG. RETAIL
$18.95
4401-0049
•160W (40W x 4)
•Solid top chassis
•Silver colored sealed faceplate
•SIRIUS Satellite Radio ready
•40-second electronic skip protection (CD)
•U.S./Euro tuner
•Wired/wireless remote ready
•Auxiliary audio input
•Pre-amp line level outputs
•Low battery audible warning
•Non-volatile memory for presets and user settings
•Two-wire power (acc, ground)
•Full iPod Control ready (interface cable sold separately)
PART #
4401-0046
4401-0049
DESCRIPTION
Universal 5” speaker
DESCRIPTION
MSR3007 stereo
iPod interface cable (12’)
TITAN POWERGRILL™
SPEAKER ADAPTERS AND GRILLES
•Nearly double the sound from your speakers, relative to stock grilles
•Use with 51/4” speakers
•Free-flowing design ensures maximum sound transfer
•Adapters maximize speaker angle toward riders head
•Install easily with stainless steel mounting hardware
•Sold in pairs
SUG. RETAIL
$169.95
24.95
PART #
4405-0158
DESCRIPTION
96-09 FLT/FLHS/FLHT/FLHTC
(front applications only)
SUG. RETAIL
$39.95
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
4401-0018
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1244
TITAN POWERBLOCK
AUDIO AMPLIFIER
•Smallest, clearest, most powerful mobile amplifier
system available; packs 180-watts RMS per-channel
•Expandable so you can start with two channels and add additional
channels as needed; easily accepts additional speakers on each channel
•Powered by patented “UcD” (Universal Class-D) technology
•Protects charging system with StatorGuard™ technology
•Easy installation with plug-and-play simplicity using factory connectors
•Designed and manufactured in the U.S.A.
PART #
4401-0056
DESCRIPTION
Titan PowerBlock amplifier
SUG. RETAIL
$499.95
TITAN DIGITAL AUDIO AMPLIFIERS
•Two-channel 75-watt RMS, 4-ohm amp provides
the extra punch needed for
motorcycle applications
•Provides maximum sound at a fraction of the power draw
•Compact water-resistant unit easily tucks away under fairing
•Easy installation with plug-and-play simplicity using factory connectors
PART #
4401-0018
4401-0026
DESCRIPTION
94-05 H-D touring bikes
Universal
SUG. RETAIL
$399.95
399.95
SPEAKERBLING™ DECORATIVE FRONT SPEAKER GRILLE INSERTS
•Provide a personalized look to speaker port
•Made of stainless steel with a clear powder-coat finish
•Use with Biketronics PowerGrills™ or stock speaker adapters
•Install easily
•Sold in pairs
•Made in the U.S.A.
PART #
DESCRIPTION
4405-0159
96-09 FLT/FLHT/FLHX models
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$69.95
SECTION
21
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
RETRO RADIO
NOMAD RADIO
CONTROL KITS
RETRO RADIO DIN-SIZED RADIO
MOUNTING KIT
•Removable handlebar
radio controls
4401-0058
•Water-resistant
automotive quality design
•Easy installation with plug-n-play using factory connectors
•Includes everything needed to outfit aftermarket fairing with a radio
•Designed and manufactured in the U.S.A.
•Allows the use of any DIN-sized aftermarket
radio to be mounted in both late model FLHT
and FLTR Harley Davidson motorcycles
•Installs easily with clean factory look
•Can be used with Biketronics RetroRadio
Nomad handlebar control kit
•Made in the U.S.A.
PART #
4401-0059
PART #
4401-0057
DESCRIPTION
SUG. RETAIL
06-09 FLTR, FLHT, FLHTC
$349.95
PART #
4401-0058
DESCRIPTION
SUG. RETAIL
96-05 FLTR, FLHT, FLHTC
349.95
DESCRIPTION
96-09 FLHT, FLTR
FUEL/AIR
SYSTEMS
ENGINE
SUG. RETAIL
$49.95
TRANSMISSION
& DRIVELINE
RETRO RADIO CD/RADIO ADAPTER KITS
•Allows the installation of a Sony CD/MP3/XM radio upgrade
•Adapts OEM handlebar controls to the Sony radio;
no modification to OEM wire harness required
•Retains handlebar control and auto volume function
of OEM radio
•Comes complete with interface
module, face plate, adapter plates
and detailed instructions
EXHAUST
GASKETS
& SEALS
4401-0001
ELECTRICAL
NOTE: Kits are compatible with Ultra
models, but disable the CB and
systems that depend on CB.
LIGHTING
NOTE: Radio is not included. Works
with Sony radios having the Sony
wired remote input.
PART #
4401-0017
4401-0001
4401-0013
DESCRIPTION
06-09 FLTR, FLHT, FLHTC
98-05 FLTR, FLHT, FLHTC
96-97 FLTC, FLHT, FLHTC
SUG. RETAIL
$199.95
199.95
199.95
PART #
4401-0014
4401-0004
DESCRIPTION
94-95 FLTC, FLHT, FLHTC
88-93 FLTC, FLHT, FLHTC
SUG. RETAIL
$199.95
199.95
4405-0156
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
4405-0157
51/4” HIGH-ENERGY
COAXIAL SPEAKERS WITH POWERGRILLS
4” COAXIAL SPEAKERS
•Perfect match with Biketronics Titan amplifier; can be used with stock
and aftermarket radios as well
•Fit 96 and later Harley front applications; 96-97 bikes with stock speakers
require speaker upgrade and possibly inner fairing supports OEM#s
58938-96B and 58939-96B
•3 ohm, 70W continuous power (140W peak)
•Feature Titan-Hertz craftsmanship and easy plug-n-play installation
•Sold in pairs
PART #
4405-0155
DESCRIPTION
96-09 FLHTC models
SUG. RETAIL
$199.95
•Available in medium- and high-energy
•Medium-energy feature 4 ohm, 40W continuous power (80W peak)
and fit both front and rear
•High-energy feature 4 ohm, 50W continuous power (100W peak), fit front
only and match perfectly with Biketronics Titan amplifier
•Both feature Titan-Hertz craftsmanship and easy plug-n-play installation
•Sold in pairs
PART #
DESCRIPTION
SUG. RETAIL
89-95 FLHTC/FLHTCU/FLTU MODELS
4405-0156
Medium-energy coaxial speakers
$109.95
4405-0157
High-energy coaxial speakers
169.95
All part numbers in BOLD MAGENTA are new for 2009.
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1245
SECTION
21
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
HOGTENNA PRE-AMPED ANTENNA
“RUBBER DUCK” ANTENNA
•Di-pole antenna has directional gain over
vertical mast antennas
•Factory power connectors are used to make
installation a snap on most Harley-Davidson
touring bikes
PART #
DESCRIPTION
4401-0019
HogTenna pre-amplified antenna
•Helically wound, 14” flexible black rubber antenna
•Provides performance similar to longer
vertical-mast antenna
•Screw-on installation; attaches to the OEM radio
antenna mount
PART #
DESCRIPTION
4401-0027
“Rubber Duck” antenna
SUG. RETAIL
$34.95
SUG. RETAIL
$14.95
4402-0048
4402-0033
4402-0048
EXHAUST
4402-0048
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
LOW MOUNT ANTENNA RELOCATION KITS
•An affordable way to relocate the antenna down low and out of the way of the detachable luggage rack or the tour pack on
radio-equipped baggers
•No need to change the location of the antenna every time the tour pack is installed or removed from the bike
•Kit includes all hardware and polished stainless
PART #
DESCRIPTION
steel bracket
4402-0033
Radio antenna kit for 85-08 FLHT/I, FLHTC/I, FLHTCU/I
•Mounts to the rear fender support brackets;
4402-0058
Radio antenna mount kit for 06-08 FLHX, 09 FLHT/I, FLHTC/I, FLHTCU/I
will not fit on models with saddlebag fillers
4402-0048
CB antenna kit for 79-08 FLHT/I, FLHTC/I, FLHTCU/I
•Made in the U.S.A.
4401-0040
ELECTRICAL
STAINLESS STEEL
DRESSER ANTENNAS
•Available in black or polished stainless steel
•Attaches to the OEM radio antenna mount
•Not for use with CB
•Made in the U.S.A.
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
SUG. RETAIL
$62.95
62.95
77.95
4401-0006
PART #
POLISHED
4401-0005
4401-0006
4401-0034
4401-0035
BLACK
4401-0036
4401-0037
4401-0039
4401-0040
DESCRIPTION
SUG. RETAIL
6” antenna
8” antenna
12” antenna
15” antenna
$42.95
42.95
42.95
42.95
6” antenna
8” antenna
12” antenna
15” antenna
42.95
42.95
42.95
42.95
6” HEAVY-DUTY
UNIVERSAL TOP/SIDE
MOUNT RUBBER
MAST ANTENNA
ELECTRONIC
HIDDEN
ANTENNA
•Finally, a hidden internal antenna
that really works
•Mounts inside any fiberglass
or plastic fairing
•Plugs into any standard AM/FM antenna jack
•Requires a switched 12-volt power source
NOTE: Antenna will not receive Weather
Band frequencies.
PART #
DS-250034
DESCRIPTION
Hidden antenna
SUG. RETAIL
$80.95
•Attached 39” cable
•6” rubber mast top/
side-mount antenna
•Rubber gasket for
watertight mounting
•Withstands tough environments
with its heavy-duty design
•Antenna angles 45° maximum
PART #
4401-0050
DESCRIPTION
Universal 6” antenna
SUG.
RETAIL
$24.95
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
LICENSE
PLATE-MOUNT
CB ANTENNA KIT
4402-0064
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1246
4402-0065
CB/RADIO ANTENNAS
•Replacement staffs have been designed specifically for the Harley CB radio cable/load system
(pre-tuned for the CB, no SWR adjustment necessary) and the Harley AM/FM portion of the audio
system (same antenna) for the tail-trunk
PART #
DESCRIPTION
SUG. RETAIL
mounting postion only
FOR 89-09 DRESSERS, ULTRA AND ROADGLIDES
•Easy installation
4402-0064 Trunk-mount antenna
$27.95
•Just over 1’ in length
4402-0065 Rail-mount antenna
27.95
•Sold each
4402-0012
•These license platemount CB antenna kits
include a black powdercoated mounting
bracket, 2’, 3’ or 4’
antenna staff, mounting
stud, frame attachment
grounding strap,
antenna connection
cable, right-angle
adapter, cable ties,
mounting hardware
and complete
installation instructions
PART #
4402-0012
4402-0013
4402-0014
All part numbers in BOLD MAGENTA are new for 2009.
DESCRIPTION
2’ antenna kit
3’ antenna kit
4’ antenna kit
SUG. RETAIL
$99.95
99.95
99.95
SECTION
21
WINDSHIELDS
TOURING
4402-0005
4402-0008
LUGGAGE
SEATS &
SISSY BARS
4402-0005
4402-0006
JMCB-2003 HANDLEBAR-MOUNTED CB AUDIO SYSTEM
•This exciting new product from J&M features a 40-channel CB radio, NOAA weather band, rider/
passenger intercom and stereo music amplification from any Walkman®-type music device
•Mount it to your left handlebar with the proper bracket kit, connect the headset/power harness to your bike’s electrical system (choose below
between solo or rider/passenger kits), install a J&M license-plate mounted CB antenna (or any other properly tuned CB antenna, sold separately), plug
in your favorite J&M dual-mode helmet headset/headsets and you are ready to go
•There are no other hidden black boxes to mount or clutter up your bike, as the complete system is on your handlebar (your Walkman-source music
device is plugged into the system as a separate item)
•All knobs and controls have been designed for ease of use while riding, even with gloves on, and in addition the unit
is water-resistant so you won’t have to worry about getting caught out in the rain
•Audio performance is superb, even at high speeds, and that is most
SUG.
impressive considering its compact size
PART #
DESCRIPTION
RETAIL
•Mounting bracket and lower-section hook-up cord sold separately
4402-0005 JMCB-2003 kit for solo (driver only) headset operation $299.95
NOTE: The JMCB-2003 is a J&M 6-pin audio system that requires the
4402-0006 JMCB-2003 kit for driver/passenger headset operation 359.95
pre-amplified microphone signal provided by our Dual Mode
4402-0008 Mount bracket for Harleys, black
46.95
(ECD/ICD/BCD prefixed) helmet headsets along with the lower
4403-0017 Mount bracket for Harleys, polished
46.95
section hook-up cord 4402-0015 or 4403-0009.
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
WATERPROOF FAIRING SPEAKERS
OEM FAIRING SPEAKERS
REPLACEMENT REAR SPEAKERS
•5” high-performance speakers are direct
replacements for factory speakers
•Feature waterproof cones and high-efficiency
voice coils
•Includes grilles
•Sold in pairs
SUG.
PART #
DESCRIPTION
RETAIL
DS-319930 96-97 FLHTC models (4 ohm) $79.95
•Upgrades rear speakers to the quality
of J&M front speakers
•High-performance speakers are direct
replacement for factory speakers
•Sold in pairs
PART #
DS-319976
DESCRIPTION
For 98-05 FLHTCU Ultra
models (8 ohm)
SUG.
RETAIL
•These 4” speakers from J&M are completely
waterproof, unlike other speakers that are only
water resistant
•Direct replacements for most factory-installed
fairing speakers and Cycle Sound housings
•Provide outstanding sound quality
•Fully guaranteed against water damage
•Fit both the front and rear positions
•Sold in pairs
PART #
DS-319933
$89.95
DESCRIPTION
For 89-95 FLHTC/FLHTCU
and FLTU models (4 ohm)
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
SUG.
RETAIL
$69.95
TANKS &
OIL FILTERS
DASHES
& GAUGES
HIGH-PERFORMANCE
FAIRING SPEAKERS
•High-performance speakers replace stock units
•Feature waterproof injection-molded
polycarbonate cone woofer
•High-flux strength Neodymium magnet
•High-efficiency voice coil
•Replacement grille set with mounted chrome
or black mid-range tweeter
•140W power
4401-0064
•Grille dimensions, mounting hole pattern and
spade electrical connections are exactly the
same as OEM for easy mounting
•Sold in pairs
SUG.
SUG.
PART #
DESCRIPTION
RETAIL PART #
DESCRIPTION
RETAIL
06-09 FLHTC (2 OHM)
06-09 FLTR (2 OHM)
4401-0063 Black
$130.95 4401-0067 Black
$130.95
4401-0064 Chrome
130.95 4401-0068 Chrome
130.95
98-05 FLHTC (8 OHM)
98-05 FLTR (8 OHM)
4401-0061 Black
130.95 4401-0065 Black
130.95
4401-0062 Chrome
130.95 4401-0066 Chrome
130.95
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
4401-0061
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
4401-0067
All part numbers in BOLD MAGENTA are new for 2009.
4401-0066
COVERS,
SECURITY
& GENERAL
1247
SECTION
21
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
HS-279/284
HELMET HEADSETS
•Provide the industry’s best
combination of wind and
ambient noise reduction with
High Output (HO) AeroMike III®
miniature microphones
•Superior audio fidelity has been
achieved with enhanced-fidelity
DynaPort®, non-ported and
ultra-slim helmet speakers
•P-series two-piece cord system
allows these headsets to be
connected to any factory-installed
motorcycle audio system ever
built, now and in the future,
just by interchanging the
lower-section hook-up cord
4403-0059
4403-0057
4403-0062
PART #
DESCRIPTION
HEADSETS
4403-0057
HS-279 w/ HO mike for most open-faced style helmets
4403-0059
HS-284 w/ HO mike, shorty-style
HOOK-UP CORDS AND ACCESSORIES
4403-0050
P-Series 8-pin lower-section hook-up cord with in-line volume control for connection to 99-09 J&M 6-pin audio systems
4402-0047
P-Series 8-pin lower-section hook-up cord for connection to 99-09 J&M 6-pin audio systems
HC-PC
P-Series 8-pin lower-section hook-up cord for connection to 89-97 H-D 5-pin audio systems
4403-0044
P-Series 8-pin lower-section hook-up cord for connection to 98-09 H-D 7-pin audio systems
4403-0062
Repl. windsock kit (three piece) for AeroMike III® miniature microphones
SUG. RETAIL
$169.95
199.95
79.95
24.95
22.95
24.95
13.95
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
HS-ECD584
SERIES HEADSETS
•Complete compatibility
with Harley-Davidson
OEM headsets
•Utilize dual-mode
AeroMike® III miniature
boom microphone
•Feature fidelity-enhanced
DynaPort® speakers for
open-face helmets
•Upper section of two-piece
hook-up cord included
with headset; lower
section sold separately
•Headsets fit all years of
Harley audio systems
including Ultras and the
JMCB-2003 audio systems
PART #
HEADSETS
4403-0014
4403-0012
4403-0013
HOOK-UP CORDS AND ACCESSORIES
DS-112377
4403-0053
4403-0052
4403-0019
4403-0062
DS-112377
4403-0052
4403-0012
4403-0013
4403-0014
4403-0062
DESCRIPTION
SUG. RETAIL
For most open-face (3/4) style helmets
For full-coverage style helmets
For most flip-front style helmets
$229.95
229.95
229.95
Z-Series 8-pin lower-section hook-up cord for connection to 89-97 H-D 5-pin audio systems
Z-Series 8-pin lower-section hook-up cord for connection to 99-09 J&M 6-pin audio systems
Z-Series 8-pin lower-section hook-up cord for connection to 98-09 H-D 7-pin audio systems
Repl. right-angle upper cord for ECD584 series
Repl. windsock kit (three piece) for AeroMike III® miniature microphones
59.95
69.95
69.95
39.95
13.95
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1248
4403-0061
DS-112354
DS-112107
HEADSET CORDS, BOOM MICS AND HARDWARE
•Fit a wide variety of J&M headsets as well as Drag Specialties headsets from J&M
•Cords feature top-quality connectors
•Hardware kit includes clamp, screws, nuts, clamp backs and hook-and-loop pieces to fit 88 and up
J&M headsets
PART #
DESCRIPTION
DS-112354
DS-112107
4402-0047
4403-0018
4403-0061
Repl. one-piece headset cord without boot for J&M HS-E164
Headset hardware kit
Lower cord for J&M six-pin audio systems (BCD257, BCD277 and Shorty series)
Repl. upper cord for BCE174 series
Windsock kit for AeroMike II®
SUG. RETAIL
$50.95
14.95
24.95
22.95
9.95
CB HAND MICROPHONE KIT
•The helmet is left behind and the rider wants
to talk on the CB; here’s the solution
•Hand mic does not interfere with
headset operation
•Easily installs without cutting or splicing wires
•Proudly made in Tucson, Arizona, U.S.A. and
completely tested before packaging
PART #
DESCRIPTION
DS-112182
For 98-05 FLHTCU models
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$89.95
SECTION
21
4402-0052
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
4403-0045
4403-0030
4402-0051
4403-0029
FUEL/AIR
SYSTEMS
4403-0032
ENGINE
4403-0039
TRANSMISSION
& DRIVELINE
4403-0034
N-COM COMMUNICATION SYSTEM
•Nolan’s N-COM system allows the freedom to talk on a mobile phone, listen to music on an MP3 player, get directions
from a GPS navigation system, connect to a bike-to-bike radio, connect to some bikes’ existing audio systems or talk
to a passenger via intercom
•N-COM is for use with Nolan N-COM-ready helmets (like the N42, N84, N102 and N103) and offers multiple configurations
GASKETS
& SEALS
N-COM MOBILE
ACCESSORIES
•Utilizes the N-COM Basic Kit to connect to a mobile phone using
a model-specific mobile wire accessory (not available from Drag
Specialties) or to a multimedia source (MP3, CD, GPS, etc.) using
a multimedia wire accessory (sold separately)
•Requires Basic Kit only
•Standard multimedia wire “S” connects any device
with a 3.5mm, 4-pole audio port
•GPS multimedia wire “T” connects Garmin Quest and Quest 2
•GPS multimedia wire “U” connects TomTom Rider and
Garmin 2610, 2720 and 2820
•GPS multimedia wire “V” connects Garmin 2820,
Zumo 400, Zumo 450, Zumo 500 and Zumo 550
•Bike-to-bike multimedia wire “K” includes push-to-talk button and
connects Alan 445 and BT and Midland GXT600, GXT600VP4, GXT650VP1,
GXT650VP4, LXT420, LXT420VP3, LXT320, LXT320VP3, GXT500, GXT550VP1,
GXT500VP4, GXT550VP4, LXT410, LXT410VP3, GXT400, GXT450VP1, GXT450VP4,
LXT300, LXT300VP3, LXT315VP3, G300, GXT300, GXT300VP3, LXT310, LXT210,
LXT210VP, G225, GXT250, GXT550, LXT310 and LXT350
•Bike-to-bike multimedia wire “W” includes push-to-talk button and
connects Alan 777, K1 and 421 and Midland G5
•Motorcycle audio wire allows rider to plug into the bike’s existing audio
system; helmet must be equipped with Basic Kit and either Intercom
E-Box or BlueTooth® E-Box
•12V motorcycle charger allows rider to charge N-COM system without a
power outlet; includes cigarette-lighter-style plug that can be hard-wired
to a motorcycle battery and a cable to connect the N-COM system
N-COM INTERCOM
•Allows all the features of N-COM MOBILE but adds the ability to speak
with their passenger (passenger must also have N-COM Basic Kit installed)
•Can also be connected to some bikes’ existing audio systems using
motorcycle audio wire accessory
•Requires Basic Kit and Intercom E-Box
N-COM BLUETOOTH®
•Allows all the features of N-COM MOBILE but adds the ability to connect
to a BlueTooth® mobile phone, GPS unit or another N-COM BLUETOOTH®
helmet within range
•Can also be connected to some bikes’ existing audio systems using
motorcycle audio wire accessory
•Requires Basic Kit and BlueTooth® E-Box
N-COM COMPONENTS
•Basic Kit includes earphones, microphone and leads for
connecting devices and charger; installs easily in minutes
without tools or modification
•Intercom E-Box fits in the side of an N-COM helmet and includes a 110V
charger, a rechargeable lithium battery and an intercom wire; allows
rider to answer phone and control volume directly from their helmet
•BlueTooth® E-Box fits in the side of an N-COM helmet and includes a
110V charger and a rechargeable lithium battery; allows rider to answer
phone, connect/disconnect with other N-COM BLUETOOTH® helmet and
control volume directly from their helmet
NOTE: Only authorized dealers can purchase N-COM products.
•Purchase one N-COM starter package; see Partsnetweb,
Dragnetweb or ask your sales representative for details
•Dealer must be informed about the product, be able to perform
installations in helmets and understand basic troubleshooting
•Dealer’s name will be added to the authorized N-COM dealer list and
referred to by his/her region
•Contact your sales representative for full details
SUG. RETAIL
$104.95
104.95
104.95
104.95
139.95
259.95
24.95
24.95
24.95
44.95
DESCRIPTION
PART #
OPTIONAL ACCESSORIES AND REPLACEMENT PARTS (CONT)
Multimedia wire “W”,
bike-to-bike communication
4403-0042
Motorcycle audio wire for
05-07 FLHTCU models
4403-0034
12V motorcycle charger
3807-0038
Repl. lithium battery
2113-0073
Repl. 110V charger
3807-0037
Repl. rubber seal for Basic Kit
0935-0244
Repl. board for Basic Kit
4402-0053
Repl. microphone windscreens (pr.)
4402-0054
55.95
All part numbers in BOLD MAGENTA are new for 2009.
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
HOW TO BECOME AN AUTHORIZED N-COM DEALER
•Authorized dealers can then buy N-COM products
on an as needed basis
DESCRIPTION
PART #
N-COM COMPONENTS
Basic Kit for N103 helmets
4403-0045
Basic Kit for N102 helmets
4403-0029
Basic Kit for N42 helmets
4403-0030
Basic Kit for N84 helmets
4403-0031
Intercom E-Box
4402-0052
BlueTooth® E-Box
4402-0051
OPTIONAL ACCESSORIES AND REPLACEMENT PARTS
Multimedia wire “S”, standard
4403-0032
Multimedia wire “T”, GPS
4403-0037
Multimedia wire “U”, GPS
4403-0038
Multimedia wire “V”, GPS
4403-0039
Multimedia wire “K”,
bike-to-bike communication
4403-0041
EXHAUST
SUG. RETAIL
$55.95
44.95
43.95
34.95
27.95
5.95
8.95
10.95
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1249
SECTION
21
WINDSHIELDS
TOURING
LUGGAGE
RIDERLINK ST-1
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
•Full-duplex driver-to-passenger intercom
•System includes driver and passenger headsets, each headset
comes with full-face and open-face-style microphones
•Speakers are music grade with excellent bass response
•Music input with built-in amplifier (adapter cable included)
•Mobile phone input with included adapter cable
•Two-way radio input with two adapter cables and PTT switch;
cable is compatible with Motorola, Cobra, Midland and many other
two-way radio brands
•Radar detector/GPS Audio input with included adapter cable
•Built-in FM radio with seek and volume controls
•Auto-mute circuit and microphone sensitivity control
•All adapter and extension cables are included and
removable when not in use
•All mini DIN connections feature weatherproof moldings
•Durable mounting straps with high-impact plastic buckles
•Portable battery-powered unit (uses 2AA batteries)
•Main unit measures 2.75” W x 4” H, approximately 1” thick
PART #
DESCRIPTION
SUG. RETAIL
4402-0031
Riderlink SK-1 communicator
$189.99
GASKETS
& SEALS
SIDEKICK SK-1000 COMMUNICATOR
•Complete communications system for all types of powersports use
•GMRS hand-held 2-way radio can be used on or off the machine, has
a range of up to 10 miles
•Universal helmet headset includes full-face and open-face microphones
•Modular 3-way adapter cable design and coiled extension cables provide
flexible mounting options
•All push-to-talk switches and connectors are weatherproof
•Rechargeable battery pack and desktop charger included
•All necessary installation accessories included
•Sold each
PART #
4402-0036
DESCRIPTION
SideKick SK-1000 communicator
SUG. RETAIL
$149.95
THUMPER 1 ENHANCED BASS HELMET SPEAKERS
•Enhanced bass response speakers for your helmet
•Install using hook-and-loop backing material
•Weatherproof connectors
•Coiled extension cable included
•Speakers measure less than 1/2” thick and just 11/2” diameter (2” diameter with speaker
covers installed)
PART #
DESCRIPTION
SUG. RETAIL
4403-0043
Helmet speakers (pr.)
$24.95
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
EXT-6
4403-0006
CABLES
4403-0008
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1250
4403-0007
MAGNUM® F14 COMMUNICATOR HEADSETS
•Full-face microphone headsets have button microphone; open-face helmet headsets have boom microphone
•All headset kits include helmet-mount dual speaker set and microphone, handlebar-mount push-to-talk (PTT) switch,
interface cable and all necessary mounting hardware
•Headsets install in helmets without permanent modifications required
•Optional small PTT switch with 20” cord available separately
•MXR-1 music mixer cable is a 2-way radio inline switch box
•Allows the addition of a music player or other audio device (MP3 player, CD player, etc.) to a MotoComm MC- or SK-series headset
PART #
DESCRIPTION
FULL-FACE HEADSETS
MC-551
Compatible w/ Motorola Talkabout 200, 250, Distance (DPS) and most FRS,
GMRS radios with separate speaker and microphone jacks
MC-552
Compatible w/ Motorola Talkabout 280SLK, T289, fr50, fr60, T6300, T6310, T6320, Sprint GT and Sprint GT+
4403-0006
Compatible w/ Garmin RINO 110, 120 and 130 series two-way radios
OPEN-FACE HEADSETS
MC-751
Compatible w/ Motorola Talkabout 200, 250, Distance (DPS) and most FRS,
GMRS radios with separate speaker and microphone jacks
MC-752
Compatible w/ Motorola Talkabout 280SLK, T289, fr50, fr60, T6300, T6310, T6320, Sprint GT and Sprint GT+
4403-0007
Compatible w/ Garmin RINO 110, 120 and 130 series two-way radios
ACCESSORIES
4403-0008
Small PTT switch w/ 20” cord
EXT-6
Headset extension cable, 6-pin
4403-0028
Music mixer cable
All part numbers in BOLD MAGENTA are new for 2009.
4403-0028
SUG. RETAIL
$59.95
59.95
59.95
59.95
59.95
59.95
19.95
14.95
29.95
SECTION
21
WINDSHIELDS
PMC-2X
TOURING
DRIVER/PASSENGER INTERCOM
•The MRC-11 allows you to speak to another rider up to 7 miles away –
several times the range of other communicators
•Bike-to-bike communication can either be push-to-talk
or automatically voice activated
•Special noise-canceling/wind-blocking headsets for maximum clarity
and freedom with no shouting necessary, even in noisiest conditions
•Simultaneous driver/passenger conversations
•Twenty two FRS/GMRS channels and 38 privacy codes
•Large LCD with 16-function readout helps monitor the selected channels
and codes, including battery condition and transmit/receive status
•Auxiliary input allows you to listen to CDs or
other external music sources
•MHS-11XO premium open-face helmet-mount headset
with push-to-talk switch included
•Sold each
•Includes one communicator and two headsets
for communication from driver to passenger on
one vehicle
•Optional adapter cables let you communicate
with other bikes by plugging any FRS/GMRS or
PMR 2-way radio with VOX into the added jack
•Full duplex – driver and passenger talk
simultaneously as though on telephones
•Electronic touch controls – no knobs
•Noise-canceling unidirectional microphones for clear conversation,
even at higher speeds
•Small (4” x 2.75” x .65”), rugged, lightweight case weighs just 4.1 oz.
and mounts on belt, or the clip can be removed and inserted in pocket
•AUX IN jack for listening to CD players
•No cumbersome handlebar or helmet mount – and no theft worries
•Include two MO-type headsets for driver and passenger
•Fit most helmets; no drilling or cutting required
•Powered by three AAA batteries (included) or by vehicle battery with
optional Battery Eliminator
PART #
4402-0018
PART #
4402-0016
MRC-11X RADIO COMMUNICATOR
DESCRIPTION
Radio communicator
SUG. RETAIL
$128.95
PMC-3X
DESCRIPTION
Driver/passenger intercom
SUG. RETAIL
$92.95
BATTERY
ELIMINATOR
DRIVER/PASSENGER INTERCOM
•All the features of the PMC-2X plus a powerful
built-in FM receiver for on-the-road entertainment
•Includes one communicator and two headsets
for communication from driver to passenger
on one vehicle
•Optional adapter cables let you communicate
with other bikes by plugging any FRS/GMRS or
PMR 2-way radio with VOX into the added jack
•Full duplex – driver and passenger talk
simultaneously as though on telephones
•Electronic touch controls – no knobs
•Noise-canceling unidirectional microphones
for clear conversation, even at higher speeds
•Small (4” x 2.75” x .65”), rugged, lightweight case weighs just 4.1 oz.
and mounts on belt, or the clip can be removed and inserted in pocket
•AUX IN jack for listening to CD players
•No cumbersome handlebar or helmet mount – and no theft worries
•Include two MO-type headsets for driver and passenger
•Fit most helmets; no drilling or cutting required
SUG.
•Powered by three AAA
PART #
DESCRIPTION
RETAIL
batteries (included) or by
4402-0017 Driver/passenger
vehicle battery with optional
intercom
$118.95
Battery Eliminator
•Forget about replacing expensive dry-cell
batteries in Nady Communicators
•Battery Eliminator taps directly into
your bike’s power source via lugs
applied directly to the battery
DESCRIPTION
For PMC-2/3
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
FOR NADY
COMMUNICATORS/INTERCOMS
PART #
2812-01
LUGGAGE
GASKETS
& SEALS
SUG. RETAIL
$34.95
ELECTRICAL
MC HEADSET
•Microphone mounts inside
mouth guard of full-face
helmets with hook-and-loop fastener
•Foam-padded speaker fits in ear
•No helmet modifications
required to mount
PART #
MC
DESCRIPTION
Headset
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
SUG. RETAIL
$24.95
CABLES
MO HEADSET
•Mounts inside any open- or full-face helmet
with hook-and-loop fastener
•Includes adjustable boom microphone;
standard on all our communicators
and intercoms
PART #
MO
DESCRIPTION
Headset
BRAKES
TANKS &
OIL FILTERS
SUG. RETAIL
$21.95
4402-0020
DASHES
& GAUGES
4402-0019
4403-0003
OPTIONAL
OPEN-FACE/
FULL-FACE
HEADSET KITS
4403-0004
4403-0005
HELMETALK HEADSETS
•Work with most popular two-way FRS/GMRS radios
•Come with both single- and double-prong connectors for easy hookup
•Use hook-and-loop pads for easy installation and removal
of microphones and earpad speakers
•Replace your old push-to-talk (PTT) switch with
Nady’s new waterproof PTT switch; sold separately
PART #
DESCRIPTION
4403-0004 Headset w/ boom mic for use w/ open-face helmets
4403-0005 Headset w/ helmet-mount mic for
use w/ full-face helmets
4403-0003 Waterproof push-to-talk (PTT) switch
FRAMES,
SUSPENSION
& FENDERS
SUG.
RETAIL
$49.95
49.95
12.95
4402-0021
FOOTRESTS
& LICENSE
PLATE FRAMES
•Optional helmet headset/cable assembly kit,
4402-0022
for use with two-way radios and cell phones
•Include connecting cables, premium open-face or full-face helmet-mount
headsets, remote PTT-11X push-to-talk switch and PMC-XC/XY cable
adapters; MRC-11X includes a microphone for driver or passenger
PART #
FOR PMC-2X OR PMC-3X
4402-0019
4402-0020
FOR MRC-11X
4402-0021
4402-0022
All part numbers in BOLD MAGENTA are new for 2009.
DESCRIPTION
SUG. RETAIL
Open-face kit
Full-face kit
$49.95
49.95
Open-face headset
Full-face headset
39.95
39.95
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1251
SECTION
21
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
SCALA RIDER® Q2™
MULTI COMMUNICATOR SYSTEM
•Includes two Scala Rider® Q2 headsets
•Bike-to-bike intercom communication up to 540 yards
•Multiple device connection technology (MDC) that allows bikers to connect to four different
devices including: Bluetooth-enabled mobile phone, GPS unit, another Scala Rider Q2 headset
and Scala Rider headset (solo, FM and Teamset) for communication up to 33 feet
•Includes an embedded FM radio with scan/seek features and six station channel memory
•Rider-to-passenger communications with passenger able to conduct mobile phone calls or listen to the FM radio independently
•Full duplex function that allows simultaneous talking and listening between bikers
•Each headset includes an MP3 jack so riders and passengers can listen to music from their own MP3 player by simply plugging it into the unit
•Incoming intercom messages and mobile phone calls automatically override MP3 player
•AGC Technology allows headset to automatically adjust its volume based on ambient noise
•Noise-canceling microphone
•Features voice dial, redial and call reject functions
PART #
DESCRIPTION
SUG. RETAIL
•Fits virtually all helmets with easy five-minute installation
4402-0060
Multi-headset communication system
$395.95
•Talk time up to 8 hours; standby time up to 10 days
SCALA RIDER® Q2™ COMMUNICATOR SYSTEM
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1252
•Bike-to-bike intercom communication up to 540 yards
•Multiple device connection technology (MDC) that allows bikers
to connect to four different devices including: Bluetooth-enabled
mobile phone, GPS unit, another Scala Rider Q2 headset and Scala Rider headset (solo, FM
and Teamset) for communication up to 33 feet
•Includes an embedded FM radio with scan/seek features and six station channel memory
•Rider-to-passenger communications with passenger able to conduct mobile phone calls or
listen to the FM radio independently
•Full duplex function that allows simultaneous talking and listening between bikers
•AGC Technology allows headset to automatically adjust its volume based on ambient noise
•Noise-canceling microphone
•Features voice dial, redial and call reject functions
•Fits virtually all helmets with easy five-minute installation
•Talk time up to 8 hours; standby time up to 10 days
PART #
•Can be upgraded to add an optional audio kit that lets riders enjoy music
4402-0055
from MP3 player (not included); see at right
DESCRIPTION
Communicator system
SUG. RETAIL
$199.95
SCALA RIDER™ TEAMSET™
•Cellphone and rider-to-passenger
communication
•Receive, initiate and reject calls by
voice control (subject to cellphone capabilities)
•Two-way radio between rider and passenger
•Conference call feature adds passenger to conversation
with third party
•Weather-protected headset fits open-faced and
full-faced helmets
•Self-installation of entire system within five minutes, leaving no
traces on helmet
•High-impact balancing microphone for high-speed conditions
•Automatically self-adjusts speaker volume according to ambient
noise level and driving speed
•VOX technology provides voice-controlled receiving and
rejecting of incoming calls
•Special clamp allows attachment and release of the headset within seconds
•Up to seven hours talk time or one week standby
•Can be upgraded to add an optional audio kit
PART #
DESCRIPTION
that lets riders enjoy music from MP3 player
4402-0041
Intercom
(not included); see at right
SCALA
RIDER®
MP3 AUDIO
UPGRADE KIT
•Adds the ability
to connect nearly any MP3 player (not included)
directly to the Scala Rider® Q2 and Scala Rider®
Teamset™ Bluetooth® headset communicators
using the included cable
•Audio unit attaches to helmet with clamp or
glue (glue plate included)
SUG. RETAIL
$229.95
PART #
4402-0061
DESCRIPTION
Scala Rider MP3 audio
upgrade kit
SUG. RETAIL
$49.95
THROAT-MIC COMMUNICATORS
•No more yelling with the finest, full-duplex
throat-mic intercom systems on the market
•Designed specifically for noisy environments
•Throat-mic picks up voice signals from vibrations
in the neck, not the air, so background noise does not register
FOX TALK RIDER/PASSENGER INTERCOM
•Fox Talk system includes an intercom unit, two neck-rings with
throat-mics and D-ring earpieces that can be placed in a helmet
if desired
•Intercom unit has 3.5mm receptor that may be used to plug in an
MP3 player
•Include a Fox Sox carrying case
ROUTE 66 RIDER/PASSENGER INTERCOM AND VANQUISH THROAT-MIC
4402-0040
4402-0039
•The next generation of throat-mic transponders offer better quality sound, requiring only one mic
•Neck rings are 50% larger with a soft rubber covering; include an extension to allow a perfect fit on
almost any neck size
•Ear bud speakers have a higher max volume than previous models and feature comfortable silicone tips
•Both systems allow the rider to connect in any headphones, ear buds or helmet speakers with standard 3.5mm plug
4402-0027
•Route 66 includes a full duplex intercom unit, two neck rings with throat-mics and two sets of ear bud speakers
•Vanquish includes one neck ring with throat-mic, one set of ear bud speakers and coiled, waterproof PTT button (extends
to 5’); simply plug the Vanquish into an intercom unit or any radio (Motorola, Cobra, Garmin, AudioVox, Uniden, etc.) that accepts
a standard 3.5mm plug and be heard clearly
•Both Route 66 and Vanquish come with a rugged aluminum storage case
4402-0026
ACCESSORIES
•Cobra two-pin adapter allows the headset to be connected to older, two-pin radios by Cobra, Midland and more
•Fox Sox neoprene carrying case will protect your throat-mic system from everyday damage
PART #
DESCRIPTION
RIDER/PASSENGER SYSTEMS
4402-0023
Fox Talk
4402-0040
Route 66 intercom
4402-0039
Vanquish throat mic
SUG. RETAIL
$89.95
164.95
94.95
PART #
ACCESSORIES
4402-0027
4402-0026
All part numbers in BOLD MAGENTA are new for 2009.
DESCRIPTION
Cobra two-pin adapter
Fox Sox carrying case
SUG. RETAIL
$9.95
9.95
SECTION
4401-0020
4401-0021
21
4401-0045
4401-0028
4401-0022
WINDSHIELDS
TOURING
LUGGAGE
4401-0029
4401-0023
SEATS &
SISSY BARS
PROVAULT™ IPOD PROTECTORS
•6061 billet aluminum iPod protector by Pro Armor
•Offers bulletproof protection and a great look
4401-0024
•Unique slide and lock system requires no tools (patent pending)
•Universal, handlebar and hard mounting systems and protective film available separately
•Hard mounting system adds extra security over universal mounting system by adding pin and clip assembly
•Protective film is perfectly cut to fit inside Pro Armor Pro Vault and over iPod to help protect it from the harmful elements
PART #
IPOD PROTECTORS
4401-0020
4401-0021
4401-0028
4401-0045
4401-0022
4401-0060
DESCRIPTION
SUG. RETAIL
30GB iPOD video and 80GB Classic
iPOD Nano generation 1
iPOD Nano generation 2
iPOD Nano generation 3
60GB/80GB iPOD video and 160GB Classic
iPOD PV Touch
$69.95
59.95
59.95
59.95
69.95
74.95
PART #
MOUNTS
4401-0023
4401-0024
4401-0029
PROTECTIVE FILM
4401-0030
4401-00311
1
EXHAUST
DESCRIPTION
SUG. RETAIL
Handlebar mount
Universal mount
Hard mount
$44.95
12.95
19.95
iPOD
iPOD Nano
1.95
1.95
Only for PART # 4401-0021 and 4401-0028.
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
deluxeCAM
•All Leader hardware is machined aluminum manufactured and chrome-plated
in the U.S.A.
•Leader hardware features a patented slot-and-lug design that makes all parts
interchangeable (including RoadRunner drink holder)
•deluxeCAM features eCaddy Deluxe’s extraordinary durability paired with a PanaVise
adjustable, flexible swivel camera mount
•Mounts a camera just about anywhere,
PART #
DESCRIPTION
controls every angle and helps to ensure
DELUXECAM
camera will never fall off
0603-0234
For 1” bars
•Chrome mounting hardware looks like it
0603-0235
For 11/4” bars
belongs on the motorcycle; easy to install
0615-0110
For H-D controls
with no special tools required
0615-0110
GASKETS
& SEALS
ELECTRICAL
SUG. RETAIL
$118.95
118.95
109.95
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
4402-0057
4402-0037
CABLES
BRAKES
4402-0038
DSR-1003G DIGITAL RECORDER
AND CAMERA SYSTEM
•Complete system lets you record your ride
•Now features 3GP technology – saves
videos in 3GP format
•Improved video color and detail
•Built-in MP3 player allows you to listen to
music, now includes Thumper helmet speakers
4402-0057
•Can be used as an active rearview camera system
•Weatherproof, bullet-style camera has a rugged aluminum housing and weatherproof connectors
•Digital recorder/playback unit has full-color display, records video and audio from camera and remote-mount microphone
•Records using standard compression and file formats
4402-0038
•Saves videos in 320x240 resolution at 30 frames/second
•1 GB built-in memory
•Accepts SD cards up to 4GB in size (4 GB SD card equals approximately 4-6 hours of video/audio recording)
(SD card sold separately)
•Color LCD and built-in speaker for on-the-go playback or rearview use
•Helmet speakers included
•Uses USB connection for transfer of video/audio files to a computer
•Analog RCA video/audio output allows you to play videos direct to TV
•Includes multiple camera mounts, all necessary hardware and adapters for battery-powered operation and 12V DC power cable
for operation off of the vehicle battery
•All cables and accessories included in convenient carrying case
PART #
DESCRIPTION
SUG. RETAIL
•Replacement bike camera mount and helmet camera mounts available separately
4402-0057
DSR-100 3G camera/recorder kit
$359.95
•DSR DC5 power adapter cable powers and charges the DSR-100 recorder from the
4402-0037
Bike camera mount
9.95
vehicle’s battery or any other 12V DC power supply
4402-0038
Helmet/universal camera mount
9.95
•Regulates and filters the DC voltage
4402-0056
DSR DC5 power adapter cable
29.95
•Power cable measures approximately 6’
All part numbers in BOLD MAGENTA are new for 2009.
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1253
SECTION
21
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
“THE BUTLER”
DRINK HOLDER
ROADRUNNER BIKE
CUP WITH HOLDER
DS-111126
•High-tech cup holder holds
mug securely while allowing
easy removal
•Driver cup holder mounts to left
clutch lever mount
•Infinitely adjustable to any
mounting position
•Available in 20 oz. or 34 oz. sizes
•Universal design allows it to fit most motorcycles
•Insulated Aladdin mug includes drinking straw
•All necessary mounting hardware included
•Made in the U.S.A.
PART #
DESCRIPTION
DS-111126
Driver’s drink holder w/ 34 oz. mug
DS-111128
Driver’s drink holder w/ 20 oz. mug
DS-111129
Passenger’s drink holder w/ 34 oz. mug
DS-111130
Passenger’s drink holder w/ 20 oz. mug
SUG. RETAIL
$57.95
57.95
57.95
57.95
0603-0129
PART #
DS-111182
0603-0094
0615-0077
2350-0025
FUEL/AIR
SYSTEMS
0615-0078
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1254
DESCRIPTION
Roadrunner bike
Roadrunner bike
Roadrunner bike
Roadrunner bike
cup
cup
cup
cup
with
with
with
with
holder,
holder,
holder,
holder,
0615-0077
2350-0025
1” bars
11/4” bars
H-D controls
universal
SUG. RETAIL
$84.95
84.95
79.95
69.95
0615-0079
2350-0026
eCADDY LITE
OR DELUXE
•All Leader hardware
is machined
aluminum and chrome-plated
•Leader hardware features a patented
slot-and-lug design that makes all parts
interchangeable (including RoadRunner
2350-0027
drink holder)
•eCaddy Lite is ideal for mounting most
items with standard belt clips, including cell phones, satellite radios,
MP3 players, CBs and lighter GPS units; plate area measures 13/8” x
27/8” x 5/16”
•eCaddy Deluxe is ideal for mounting larger GPS units and XM satellite;
plate area measures 113/16” x 11/2” x 5/16”
•Available for 1” or 11/4” handlebars, universal design for flat surfaces
and a version that mounts to all 96-09 Harley-Davidson handlebar
controls with 11/2” screw spacing
•Multi-faceted lugs offer secure mounting at six different angles
•eCaddy Deluxe works with the standard four-hole “AMPS” pattern
(11/2” x 11/4”)
•eCaddy Deluxe also works with diamond shaped “RAM” pattern
(plate area: 113/16” x 11/2” x 5/16”), however some units will require
a cradle between component and eCaddy
•Made in the U.S.A.
PART #
eCADDY LITE
0603-0129
0603-0130
0615-0078
2350-0026
eCADDY DELUXE
0603-0132
0603-0133
0615-0079
2350-0027
•All Leader hardware is machined
aluminum and chrome-plated
•Leader hardware features a patented
slot-and-lug design that makes all parts
interchangeable (including RoadRunner
drink holder)
•Hot or cold 16 oz. stainless steel cup
features an insulated spill-proof lid
•Tapered cup drops into a specially
designed chromed aluminum
twelve-position holder
•Holders fit left side or right side of most
1” or 11/4” bars, or universal design for flat
surface applications and a mount for all
96-07 Harley-Davidson handlebar controls
with 11/2” screw spacing
•Each features multi-faceted lugs that offer
secure mounting at six different angles
•Made in the U.S.A.
DESCRIPTION
SUG. RETAIL
For
For
For
For
1” bars
11/4” bars
H-D controls
flat surfaces, universal
$69.95
69.95
64.95
49.95
For
For
For
For
1” bars
11/4” bars
H-D controls
flat surfaces, universal
69.95
69.95
64.95
49.95
CLIP-IT!™
•Designed to hold
cell phone, iPod,
MP3, electronic toll device,
just about anything that you can
clip to your belt
•Patented mounting system allows the Clip-It!
to be mounted onto any 1/4” bolt or screw, or
simply mount it to your 7/8” or 1” handlebars
with the included handlebar mount kit
PART #
DESCRIPTION
0603-0139
Clip-It!
COSMOS CADDY BUDDY
•Keeps electronics at fingertips
and protected from the elements;
constructed of leather-touch vinyl
•For use with the eCaddy Lite mounts;
measures 4.25” wide and 5.5” high
•Clear cover on the front allows easy
viewing of electronics
•Back contains a rigid plastic clip that securely
locks on to the eCaddy Lite
•Quick, secure and easy to install; rider can go from
belt to handlebars in seconds
•Holds iPods, MP3 players, GPS, toll passes, cell phones,
wallet, cigarettes, keys, or just about anything
•Customer should check the dimensions of the item to make sure
the Cosmos Caddy Buddy is large enough
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
3550-0071
Cosmos Caddy Pouch
$16.95
OPTIONAL/SPARE/REPLACEMENT
PARTS FOR LEADER ACCESSORIES
•All Leader hardware is machined aluminum and
chrome-plated
•Leader hardware features a patented slot-and-lug design that
makes all parts interchangeable (including RoadRunner drink holder)
•For a few extra dollars, riders can mount extra brackets/hardware
on almost any handlebar, flat surface or H-D control and move electronics
or drink holders from place to place
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
0603-0228
Mounting bracket for 1” bars
$44.95
0603-0229
Mounting bracket for 11/4” bars
44.95
0615-0108
Mounting bracket (reversible) for H-D controls,
includes screws and spacers)
39.95
0615-0109
Mounting bracket flat surfaces, universal
29.95
0603-0230
eCaddy Lite plate (iPod, cell phone, PDA)
24.95
0603-0231
eCaddy Delluxe plate (GPS, Satellite radio)
24.95
0603-0233
Roadrunner chrome ring
29.95
0603-0232
Roadrunner cup
15.95
0603-0236
Camera mount
74.95
SUG. RETAIL
$39.95
THERMOMETER AND
CLOCK GAUGE SET
•One-piece set mounts
to the center windshield
support on all models
•Gauge support is made from
billet aluminum with
a Show-chrome finish
•Both gauges have a gold bezel
HANDLEBAR MOUNT CLOCK
•Chrome housing
•Clamp fits 7/8” and 1” diameter handlebars
•Includes all necessary mounting hardware
PART #
DESCRIPTION
0603-0099
Handlebar mount clock
SUG. RETAIL
$45.95
PART #
2212-0130
All part numbers in BOLD MAGENTA are new for 2009.
DESCRIPTION
Gauge set
SUG. RETAIL
$74.95
SECTION
21
WINDSHIELDS
2212-0051
2212-0052
2212-0053
2212-0054
2212-0055
2212-0056
2212-0041
2212-0042
TOURING
LUGGAGE
2212-0043
2212-0044
2212-0045
2212-0046
2212-0048
2212-0049
2212-0050
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
FORMOTION SERIES CLOCKS AND THERMOMETERS
•Time and temperature gauges are the highest quality available on the market
today for power-sports applications
•Real-world and laboratory-tested to perform to the highest standards
•Super accurate with easy-to-read face design
•Freeze, shock and water resistant
•Mount to any 1/4” screw or bolt via supplied chrome mounting bracket; optional
mounting brackets to handlebar sold separately
2212-0060
2212-0062
•Thermometers are oil-encapsulated to fully resist vibration, and have a range
of -20°F to 120°F with an accuracy to within +/- 3-5°
•Clocks feature high-quality Citizen® internal clock movements, and come with a long-lasting
button-cell battery
•Available in three different series and in a variety of backface/case color combinations, including Lite
green backface with LumiGlow™ Night Vision, which will glow brightly up to 10 hours on a single
5-10 minute light charge
•Signature Series feature 316L stainless steel construction with beautiful show-chrome finish and are
waterproof-rated to 5 atm
2212-0064
•Classic Series feature alloy case construction and are waterproof-rated to 3 atm
•Stick-On Series thermometers have all the features of the Signature Series clocks, but do not use
or include mounting hardware; instead, they adhere securely to any clean, hard surface using 3M™ technology
•Measure 1.55” dia. and .35” thick
CLOCK PART #
THERMOMETER PART #
DESCRIPTION
SIGNATURE SERIES
2212-0051
2212-0052
White face, chrome case
2212-0053
2212-0054
Black face, chrome case
2212-0055
2212-0056
LumiGlow green face, chrome case
CLASSIC SERIES
2212-0041
2212-0042
White face, black anodized case
2212-0043
2212-0044
White face, silver anodized case
2212-0045
2212-0046
Black face, black anodized case
2212-0047
2212-0048
LumiGlow green face, silver anodized case
2212-0049
2212-0050
LumiGlow green face, black anodized case
STICK-ON SERIES
2212-0060
2212-0061
White face, silver aluminum case
2212-0062
2212-0063
Black face, black aluminum case
2212-0031
2212-0032
LumiGlow green face, chrome case
2212-0064
2212-0065
LumiGlow green face, silver anodized case
2212-0066
2212-0067
LumiGlow green face, black anodized case
PART #
DESCRIPTION
OPTIONAL HANDLEBAR MOUNTING BRACKETS
0603-0135
For 7/8”-1” bars, chrome
SUG. RETAIL
NIGHT ADVANTAGE CLOCKS AND THERMOMETERS
$19.95
PART #
DESCRIPTION
OPTIONAL HANDLEBAR MOUNTING BRACKETS (CONT)
0603-0170
For 11/4” bars, chrome
ENGINE
2212-0063
GASKETS
& SEALS
ELECTRICAL
2212-0067
0603-0135
LIGHTING
SUG. RETAIL
$72.95
72.95
79.95
53.95
53.95
53.95
62.95
62.95
39.95
39.95
59.95
45.95
45.95
SUG. RETAIL
$19.95
2212-0057
•Clocks feature high-quality Citizen® internal clock movements, and
come with a long-lasting button-cell battery
•Clocks also feature an electro-luminescent backlight dial that draws
almost no power and produces a non-glaring light at the push
of a button
•Thermometers are oil-encapsulated to fully resist vibration, and
have a range of -20°F to 120°F with an accuracy to within +/- 3-5°
•Shock-resistant and no outside wiring necessary
2212-0059
•Water-resistant to 3 atm
•Include all hardware necessary to mount on any 1/4” bolt on the bike, or can be mounted to any 7/8”-11/4” dia.
2212-0120
handlebar using optional handlebar mount (sold separately)
•Available with stainless steel, black anodized or silver anodized case with white face and LumiNova glowing hands
SUG.
SUG.
0603-0135
PART #
DESCRIPTION
RETAIL PART #
DESCRIPTION
RETAIL
CLOCKS
THERMOMETER
2212-0057 W/ polished stainless steel case and white face, round $74.95 2212-0120 W/ polished stainless steel case and white face, round
(not backlit)
$74.95
2212-0121 W/ polished stainless steel case and carbon fiber-style
face, round
74.95 OPTIONAL HANDLEBAR MOUNTING BRACKETS
2212-0058 W/ black anodized case and white face, square
68.95 0603-0135 For 7/8”-1” bars, chrome
19.95
2212-0059 W/ silver anodized case and white face, square
68.95 0603-0170 For 11/4” bars, chrome
19.95
All part numbers in BOLD MAGENTA are new for 2009.
TRANSMISSION
& DRIVELINE
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1255
SECTION
21
WINDSHIELDS
POLICE SL CLOCKS
TRIGGER CLOCKS
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
•Matt Hotch-designed Trigger clocks
•Feature a unique mounting system
that makes them look like part of
the bike
•304-grade stainless steel
construction with vertical
brushed finish
•Citizen movement constructed in the
same fashion as fine wristwatches
•Entire movement is housed in the
2212-0125
2212-0126
case, making the movement, case,
stem and sapphire bezel as one structural design element
•Water-resistant to 3 atm
•Mounts in minutes: simply split the half shell of the band, position it over
your handlebars and tighten the halves together using the hex-head
screw with the enclosed hex tool
•Available for 1” and 11/4” bars
PART #
DESCRIPTION
SUG. RETAIL
FOR 1” BARS
2212-0125
White face
$97.95
FOR 11/4” BARS
2212-0126
Black face
97.95
2212-0127
White face
97.95
2212-0128
ROAD KING FORK LOCK CLOCKS WITH SWIVEL FORK LOCK COVER
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
2212-0129
SPOT CLOCKS™
•Easy-to-read clocks have 45mm
(1.77”) dia. case and 40mm (1.57”) dia.
face with Super-LumiNova glowing
hands and large markers
•High-quality Swiss ISA internal clock
movements, and come with a longlasting button-cell battery
•Gun metal stainless steel case
2212-0123
2212-0122
•Available with aluminum metal silver face
and black face
0603-0135
•UV fade-resistant face
•Standard and military hour markers
•Water-resistant to 10 atm (330’)
•Include all hardware necessary to mount on any 1/4”
bolt on the bike, or can be mounted to any 7/8”-11/4”
dia. handlebar using optional handlebar mount (sold separately)
•Replaceable button-cell battery
PART #
DESCRIPTION
SUG. RETAIL
CLOCKS
2212-0122
W/ aluminum metal silver face
$97.95
2212-0123
W/ black face
97.95
OPTIONAL HANDLEBAR MOUNTING BRACKETS
0603-0135
For 7/8”-1” bars, chrome
19.95
19.95
0603-0170
For 1 1/4” bars, chrome
•316L stainless steel fork lock cover clock for all Harley Road Kings
•Push the top button for instant backlighting for nighttime viewing
•Features tough Citizen movement
•Water-resistant to 3 atm
•Clock is bolted into the swivel base so there’s no need to worry about it falling out or being stolen
•Available with white face and carbon fiber black face
PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
SUG. RETAIL
2212-0128 White face
$89.95 2212-0129 Carbon fiber black face
$89.95
2212-0033
2212-0034
•Analog clocks about the size of a quarter
•Are small enough to fit on the corner of a rearview mirror,
but are still large enough to be easily seen
•Can be mounted anywhere there is a flat surface with 3M™
sticky mount
•Clocks are fully functional and feature a diver’s-style rotating bezel
•Alloy case with stainless steel back
•Shockproof and waterproof rated to 3 atm
•Available in a variety of backface and bezel color combinations
2212-0036
•Measure .85” dia. x .30” thick
PART #
DESCRIPTION
SUG. RETAIL PART #
2212-0033
Black face, black bezel
$27.95 2212-0036
2212-0034
White face, black bezel
27.95 2212-0037
2212-0035
White face, red bezel
27.95 2212-0038
2212-0035
2212-0037
VISION 360™ COMPASS
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1256
2212-0038
DESCRIPTION
Black face, silver bezel
White face, silver bezel
Red face, gold bezel
SUG. RETAIL
$27.95
27.95
27.95
2212-0167
•Features an all-alloy case with
a show-chrome finish
•360° viewing ball makes for easy
reading at any mounting angle
•Can be swiveled in any
2212-0039
2212-0040
direction on its mounting base
•Features liquid damping for quick settling over even the roughest terrain
•Mounts to any 1/4” bolt, and can be mounted to handlebars with optional
handlebar mounting bracket and clamps
•Choose from compass ball in black or white
•Easily calibrated for accuracy
•Measures 1.91” dia. x 1.87” H
PART #
DESCRIPTION
SUG. RETAIL
2212-0039
Black ball compass
$64.95
2212-0040
White ball compass
64.95
OPTIONAL HANDLEBAR MOUNTING BRACKETS
7
19.95
0603-0135
For /8”-1” bars, chrome
0603-0170
For 11/4” bars, chrome
19.95
FLAT MOUNT CLOCKS
•These simple but elegant chrome mounts
with clock can be mounted just about
anywhere there is a flat surface
•Can be attached in two ways: using the center
hole and screw (screw not included), or via
the included 3M® sticky-disk
•Can be upgraded to Night Advantage electroluminescent clock PART #2212-0057 for
best night viewing
2212-0164
PART #
DESCRIPTION
2212-0163
White face
2212-0164
Black face
SUG. RETAIL
$39.95
39.95
STEM NUT-COVER CLOCKS
•316L steel construction
•Clock is 3 ATM water-resistant (100 ft.)
with Citizen movement
•Includes setscrew to lock gauge
into place
•A perfect clock for the perfect location
•Black face
•Available for 39mm and 57mm stem nuts
PART #
DESCRIPTION
2212-0167
Stem nut-cover clock, 39mm
2212-0168
Stem nut-cover clock, 57mm
SUG. RETAIL
$59.95
59.95
C-MOUNTS
•Stunning polished billet mounting
allows for virtually unlimited positions
on your 1” or 11/4” handlebars
•Simple lock screws hold the mount securely to bars
and built-in micro thin rubber scuff sleeve ensure
bars won’t get scratched
•C-mounts include low-profile Formotion clock or
thermometer (C-mount with clock can be upgraded to
Night Advantage electro-luminescent clock PART #2212-0057 2212-0157
for the best night viewing)
C-MOUNT
C-MOUNT WITH
WITH CLOCK
THERMOMETER
DESCRIPTION
SUG. RETAIL
1” HANDLEBARS
2212-0155
2212-0159
White
$59.95
2212-0157
2212-0161
Black
59.95
1 1/4” HANDLEBARS
2212-0156
2212-0160
White
59.95
2212-0158
2212-0162
Black
59.95
All part numbers in BOLD MAGENTA are new for 2009.
SECTION
21
WINDSHIELDS
TOURING
FREESTANDING
RACK
ROTATING
RACK
•This freestanding
rack has 16
front-facing pockets
•Each pocket holds
two manuals
•Measures 18” W x
56” H x 23” D
PART #
DESCRIPTION
HM-DR2
Freestanding
rack, holds
32 manuals
PEGBOARD RACK
•Rack attaches to pegboard
and holds 30 to 35 manuals
•Measures 24” W x 15” H x 10” D
PART #
HM-DR8
DESCRIPTION
Pegboard rack, holds 30 to 35 manuals
•Rotating
rack is
freestanding
and has 36
front-facing
pockets
•Measures 24”
W x 70” H x 24” D
PART #
DESCRIPTION
HM-DR-36
Rotating rack,
holds 36 manuals
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
4201-0136
4201-0146
4201-0100
4201-0121
GASKETS
& SEALS
ELECTRICAL
SINGLE-POCKET RACK
M420
M418
4201-0169
4201-0178
MOTORCYCLE REPAIR MANUALS
•Whether it’s simple maintenance or complete restoration, don’t start work
without Clymer, the leader in service manuals
•Save yourself time and frustration with these procedures and techniques used by the professionals
•Comprehensive manuals contain exploded views, drawings, specifications and charts to illustrate
each job
•Feature shortcut repairs and high-performance modifications
PART #
DESCRIPTION
SUG. RETAIL
4201-0136
For 99-05 FLHT/FLT Twin Cam 88 and 103
$34.95
4201-0146
For 00-05 FLST/FXST Twin Cam 88B
45.95
4201-0100
84-98 FLHT/FLT/FXR Evolution
45.95
M421
84-99 FX/FL, FXST/FLST, Big Twin Evolution
34.95
4201-0174
91-98 FXD
34.95
34.95
4201-0121
For 99-05 FXD/FXDWG/Twin Cam
M424
91-98 Dyna Glide
34.95
M420
66-84 Shovelhead
34.95
M418
48-65 Panhead
34.95
4201-0101
04-06 Sportster
45.95
4201-0169
86-03 Sportster
45.95
M419
59-85 Sportster
34.95
4201-0178
02-07 VRSC
45.95
C-6
•Single-pocket rack allows manuals
to be positioned adjacent to
replacement parts
and accessories
•Measures 9” W x 11” H x 5” D
PART #
DESCRIPTION
HM-DR18
Single-pocket rack
BRAKES
TANKS &
OIL FILTERS
9903-0174
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
ROTARY FLOOR
DISPLAY FOR
CLYMER MANUALS
•Showcase your service and repair manuals
for optimum sales
PART #
DESCRIPTION
C-6
24-manual display rack (free w/ purchase of 20 manuals)
C-9
36-manual display rack (free w/ purchase of 30 manuals)
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
C-9
DISPLAY RACKS
LIGHTING
•Showcase 25 different
Clymer titles per unit
•Rotary design occupies
minimum floor space
•Let your customers
browse the full line of
Clymer repair manuals
to find the right one for
their bike
PART #
DESCRIPTION
SR-25
Rotary floor display rack
9903-0174
Standard display rack
All part numbers in BOLD MAGENTA are new for 2009.
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1257
SECTION
21
WINDSHIELDS
RADAR DETECTOR
MOUNT KIT
CHROME CORD KEEPERS
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
•Hold pigtail communication cord
when not in use
•Chrome finish
•Sold in pairs
PART #
DESCRIPTION
2120-0067
Chrome cord keepers
SUG. RETAIL
$11.95
•Slipstreamer’s radar mount kit allows
most radar detectors to be mounted
to 1” diameter handlebars
•Constructed from black
anodized aluminum with a 3/16”
PART # DESCRIPTION
clear acrylic mounting plate
RM-1
1” radar mount kit
•Measures 41/4” L x 31/4” W
SUG.
RETAIL
$34.95
AIR FLOW
MESH KITS
•Easy to install,
do-it-yourself kit
•Large 18” x 18”
1901-0122
1901-0153
mesh is enough to
1901-0121
cover radiators and
1901-0154
1901-0123
bodywork vents
•Lightweight aluminum mesh in square,
diamond, honeycomb, round or oval pattern
•Stylish and functional
•Can be polished, painted or powder-coated to achieve many different
looks while adding style and protection
•Made in the U.S.A.
PART #
1901-0121
1901-0122
1901-0123
1901-0153
1901-0154
DESCRIPTION
Square
Diamond
Honeycomb
Round
Ovalesque
SUG. RETAIL
$48.95
48.95
48.95
48.95
48.95
LEATHER/
CHROME CONCHOS
•Quality leather and chrome conchos
make ideal trim for saddlebags, seats,
jackets, chaps and vests
•Easy mounting; just tie on
•Sold in packs of five
PART #
DESCRIPTION
DS-110910
Leather and chrome conchos
SUG. RETAIL
$29.95
GASKETS
& SEALS
BELT PACK
POLISHED TEARDROP CONCHO
ELECTRICAL
LIGHTING
•Keep your bike lock, cell phone or other
essentials at your fingertips
•Sold to dealer as pack of six; sold
to cutomer each
•Stainless steel concho features the unique
teardrop style with a polished outer surface
•Measures 23/8” L x 19/16” W; mounting screws
included with each concho
•Sold individually
PART #
DESCRIPTION
DS-110829
Polished teardrop concho
PART #
3517-0030
SUG. RETAIL
$5.95
DESCRIPTION
Belt Pack (6-pk.)
SUG.
RETAIL
$8.95
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
S&S SERVICE MANUALS
•Created to help maintain
S&S engines
•Outline the procedures necessary
for both home mechanic and shop
technician to ensure maximum
performance and longevity
4201-0181
4201-0182
4201-0183
PART #
DESCRIPTION
4201-0181
For S&S T-series engines (T124)
4201-0182
For S&S 41/8” bore V-series engines (V124, V117, V11)
4201-0183
For S&S 35/8” and 4” bore V-series engines (V88, V96, V107, V113)
4201-0184
For S&S SH-series engines (SH80, SH93, SH93H, SH103, P93, P93H, P103)
4201-0184
SUG. RETAIL
$30.95
30.95
30.95
30.95
4201-0072
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1258
MOTORCYCLE
REPAIR MANUAL
HM-2478
4201-0038
•Manual is based on a complete teardown and step-by-step rebuild
•Covers everything from changing an oil filter to a complete engine rebuild
•Hard-bound format
PART #
DESCRIPTION
HM-2478
For all 99-03 Twin Cam 88
4201-0072
For 70-99 Shovelhead and Evolution Big Twins
4201-0038
For all 70-03 Sportsters (hardcover)
SUG. RETAIL
$35.95
35.95
35.95
COUNTERTOP
FIVE-POCKET
RACK
•Each pocket holds
three manuals
•Measures 9” W x
22” H x 14” D
PART #
DESCRIPTION
HM-DR1
5-pocket rack, holds 15 manuals
All part numbers in BOLD MAGENTA are new for 2009.
SECTION
21
WINDSHIELDS
USA-FLG
DIX-FLG
TOURING
0521-0023
RFMSQ
LUGGAGE
0521-0422
SEATS &
SISSY BARS
FOLDING FLAG MOUNTS
•Bolts directly to bar on Harley-Davidson tour
box racks on most classics
•Folds down easily to avoid poking a hole in bike
cover; push-button places mount in folded
position, solid stainless pin locks mount in
upright position
•Made of polished stainless steel
•Includes an American flag
•POW-MIA and Dixie flags sold separately
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
9” WITH 6” X 9” FLAG
RFMFLD
For 1/2” bars
$80.95
0521-0422
For 5/8” bars
84.95
13” WITH 10” X 15” FLAG
0521-0023
For 1/2” bars
96.95
0521-0431
For 5/8” bars
101.95
POW-FLG
0521-0440
SQUARE RACK FLAG MOUNTS
FLAGS
•Double-sided flags hold up to highway speeds
•Poly-cotton blend and heavy screen printing
give flags durability
•Made to go over a 3/8” pole
•Choose from American, POW-MIA, Dixie and
Jolly Roger flags
•Choose from 6” x 9” or 10” x 15” flags
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
6” X 9”
USA-FLG
American
$11.95
DIX-FLG
Dixie
11.95
POW-FLG
POW-MIA
11.95
0521-0440
Jolly Roger
11.95
10” X 15”
0521-0026
American
15.95
0521-0027
POW-MIA
15.95
0521-0441
Jolly Roger
15.95
•Polished 304 stainless steel mount bolts
directly to the square .6” sport racks on Softail,
Sportster and Dyna Glide
•Mount, as well as pole, can be easily detached
via a small setscrew
•Includes an American flag
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
FOR SOFTAIL, SPORTSTER AND DYNA GLIDE
RFMSQ
W/ 6” x 9” flag
$47.95
0521-0022
W/ 10” x 15” flag
64.95
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
0521-0024
ELECTRICAL
0521-0224
0521-0223
FIXED
FLAG
MOUNTS
0521-0225
ANTENNA FLAG MOUNT KITS
•Easily and securely mounts flags to antennas
•Will not work its way up antenna
at highway speeds
•Heavy-duty nylon rod and nylon clamps keep
mount securely attached to your antenna
•Choice of American, POW-MIA and Dixie flag
•Flags measure 6” x 9”
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
0521-0223
POW-MIA
$17.95
0521-0224
American
17.95
0521-0225
Dixie
17.95
LIGHTING
•Polished 304
RFMFXD2
stainless steel
flag mounts
bolt to 7/8”
bars for
the license
plate frame on
Road Kings, Road Glides and Classics
•Small setscrew secures pole in mount and can
be easily removed for changing flags
•Bore fitting for a strong hold without cracking
the chrome of your bar
•Includes an American flag
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
RFMFXD2
W/ 6” X 9” flag
$64.95
0521-0025
W/ 10” X 15” flag
79.95
RFMSQSB
0521-0196
SQUARE SISSY BAR FLAG MOUNTS
•Polished 304 stainless steel flag mount bolts directly to the
square 1/2” sissy bar on most Softails, Sportsters and Dynas
•Mount, as well as pole, can be easily detached via
a small setscrew
•Includes an American flag; POW-MIA flag available separately
•Available with 6” x 9” flag or 10” x 15” flag
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
RFMSQSB
W/ 6” x 9” flag
$47.95
0521-0196
W/ 10” x 15” flag
64.95
13” STAINLESS
FLAG POLE
•Replacement
stainless steel pole is
interchangeable with all
existing flag mounts
•Fits the larger flags
•Made in the U.S.A.
PART #
DESCRIPTION
0521-0028 13” pole
SUG.
RETAIL
$17.95
SADDLEBAG BAR FLAG MOUNTS
•Bolts to 3/4” saddlebag bars found on larger
Harley-Davidson bikes; bore fitting makes a
strong hold without cracking chrome on the
bag bar
•Made of polished stainless steel
•Includes an American flag; POW-MIA and Dixie
flags sold separately
•Available with 6” x 9” flag or 10” x 15” flag
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
RFMPL
W/ 6” x 9” flag
$58.95
0521-0024 W/ 10” x 15” flag
74.95
TOUR
PACK SOLID
FLAG MOUNTS
•Excellent
alternative to
plastic flags that
mount on the side
0521-0428
of the pack
•Made of
hand-polished
stainless steel
•Pole is removable to easily change
flags or put away for storage
•Includes an American flag
•POW-MIA and Dixie flags sold separately
•Includes Allen keys for easy installation
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
WITH 6” X 9” FLAG
0521-0226
For 1/2” bars
$53.95
0521-0425
For 3/8” bars
53.95
0521-0428
For 5/8” bars
58.95
WITH 10” X 15” FLAG
0521-0227
For 1/2” bars
68.95
0521-0434
For 3/8” bars
68.95
0521-0437
For 5/8” bars
74.95
All part numbers in BOLD MAGENTA are new for 2009.
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1259
SECTION
21
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
FLAG, POLE
AND HOLDER
•Fly the flag
with pride
•Stylized holder with adjustable angle
clamps sturdily onto any 1/2”
diameter tubing
•Includes 1/2” diameter flagpole for a
blended, one-piece look, or insert your own flag pole – tapered holder
will secure 1/4” to 3/8” diameter flagpole
•Includes 4” x 6” American flag
PART #
DESCRIPTION
SUG. RETAIL
0521-0042
Flag, pole and holder
$79.95
LICENSE
PLATE
FLAG
MOUNT
•Support plate and plate bracket
bolt behind the license plate
•Flag staff measures 12” long and
the angle can be easily adjusted without tools
•Includes 41/2” x 81/2” American flag
•For use with 4” x 7” license plates, 53/4” x 23/4” center distance, mount
has 3” offset
NOTE: Be sure the motorcycle license plate mount is strong enough
to support the force applied by a flag at speed.
PART #
DESCRIPTION
SUG. RETAIL
2030-0224
License plate flag mount
$89.95
9001-0004
REFLECTIVE TAPE KIT
EXHAUST
•An inexpensive way to ensure visibility
•Adhesive strips easily attach to helmets,
motorcycles, bikes, snowmobiles
and ATVs
•Kit contains two 8” L x 1/2” W
and four 3” L x 1/2” W
weather-resistant strips
SUG.
PART #
DESCRIPTION
RETAIL
RST-585
Reflective tape kit
$9.95
FLAGS
FUEL/AIR
SYSTEMS
ENGINE
•Double-sided, heavyduty polyester flags
9001-0003
•Fit 3/8” poles;
include O-ring
•Dimensions: 6” H x 9” W
PART #
DESCRIPTION
9001-0003
POW/MIA
9001-0004
U.S.A.
SUG. RETAIL
$8.95
8.95
TRANSMISSION
& DRIVELINE
ST205009
GASKETS
& SEALS
ST007306
ST007303
ELECTRICAL
ST108915
4320-0662
ST205148
ST206114
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
ST206117
ST206622
ST206911
ST509300
STICKERS
•Designed to withstand many seasons of outdoor use
•Stickers sold in pairs or each
•Laser-cut stickers are packaged for hangtag display
PART #
DESCRIPTION
SIZE
4320-0662
Bullet holes
4” x 4”
ST007303
Pirate skull and sword
5.5” x 4.5”
ST007306
Pirate w/ red bandana
6” x 3”
ST108915
Lucky dice
6.5” x 6”
ST205009
Proud to be an American
8.5” x 3.5”
ST205148
Tattoo skull
4” x 5”
ST206114
Reaper/bomb
4” x 5”
ST206117
Metal slash
5” x 8”
DASHES
& GAUGES
DS-719869
COVERS,
SECURITY
& GENERAL
1260
DESCRIPTION
Bloodshot eyes (pair, small)
U.S.A. eagle
Bloodshot eyes (one, large)
Bullet holes (8)
Bullet holes (8)
Skull and crossbones
Power, gray/white/red
Power, gray/white/blue
SIZE
4” x 6”
4” x 5”
5” x 7.5”
10” x 6.5”
9.5” x 6.5”
5” x 4”
9”
9”
SUG. RETAIL
$8.95
8.95
12.95
22.95
22.95
12.95
15.95
15.95
DS-719870
75002
FOOTRESTS
& LICENSE
PLATE FRAMES
HARDWARE,
CHEMICALS
& TOOLS
PART #
ST206622
ST206911
ST209622
ST212129
ST212505
ST509300
ST810515
ST810517
ST810517
75000
FRAMES,
SUSPENSION
& FENDERS
TIRES,
TUBES &
WHEELS
SUG. RETAIL
$7.95
10.95
10.95
11.95
7.95
7.95
8.95
8.95
ST810515
CRUSADER
MALTESE
CROSS
ACCENT
75004
CUSTOM VINYL GRAPHICS
•Add some sizzle to your bike
•Custom vinyl graphics resist fuel, fading
and scratches
•100-mph tested – thin profile and design keeps these stickers
in place
•Each kit contains six flames: two large, two medium and two
accent flames
PART #
DESCRIPTION
SUG. RETAIL
75000
Flames
$29.95
75002
Euro flames
29.95
75004
Skull flames
29.95
CHROME FLAME ACCENTS
•Steel accents give style to your ride
•Mount to any flat surface with
double-sided tape (included)
•Available in 1” x 3” and 13/4” x 6” sizes
•Sold in pairs
SUG.
PART #
DESCRIPTION
RETAIL
DS-719869 3” Flame
$22.95
DS-719870 6” Flame
43.95
All part numbers in BOLD MAGENTA are new for 2009.
•Quality chrome-plated billet
aluminum construction
•23/16” cross fits on any flat surface
on bikes, cars or trucks
•Uses special double-sided heatresistant tape
•Matches Novello Crusader Maltese Cross
points cover, derby cover, oil dipstick
cap, mini horn cover, inspection cover,
transmission cover, primary cover, triple
tree cover and gas cap
PART #
DESCRIPTION
SUG. RETAIL
0940-0612 Billet accent
$35.95
SECTION
MANNEQUIN
AND
WINDSHIELD
HOLDER
COLOR FAN
•Made by Memphis Shades, these
windshield color chips are bolted
together so you can fan them
out and show your customers
available color options
•Compact eye-catching sales tool
fits in palm of hand and
attracts attention
PART #
DESCRIPTION
MEMFAN Memphis Shades color fan
21
WINDSHIELDS
MEM0950
•Actual size fork/
headlight store
display fixture for
Memphis Shades
windshields
•Hangs on slatwall or gridwall
•Durable aluminum and thermoformed plastic
•Use to display or demonstrate windshields
•Acrylic windshield holder for
PART #
mannequin is also available;
MEM0950
updates the mannequin so you
MEM0960
no longer need handlebars or
hardware to display windshields
TOURING
ABS HOLDER
FOR WINDSHIELD
INSTALLATION
MEM0960
DESCRIPTION
Display mannequin
Windshield holder
for mannequin
•Convenient temporary holder for
plastic or hardware installation
•Protects windshield from
scratching during installation
PART #
DESCRIPTION
MEM0965
ABS holder
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
WINDSHIELD SIZING GUIDE
•It’s like 20 windshields in one – every profile is clearly outlined so that a customer can look at every Memphis Fats/Slim and Sportshields
in each size available, all at once
•Take the guesswork out of fitting windshields for customers
•Hold the sizing guide above the motorcycle’s headlight and let the customer decide exactly which style of windshield they want
•All sizes and styles of Memphis Shades windshields are clearly marked on this fantastic sales aid
•Intended for dealer use only
PART #
9001-0001
ELECTRICAL
DESCRIPTION
Sizing guide
HANDLEBARS,
CONTROLS
& MIRRORS
1972 OLDSMOBILE 442
CONVERTIBLE BANK
•1:24 scale die-cast replica of one of the truly
great muscle cars from times gone by
•Doors open and reveal fully furnished interior
including folding front seat backs
•Steering wheel turns front wheels; driveshaft turns when rear wheels roll
•Hood opens to expose the highly detailed 400-cu. in. 350 engine
•Trunk lid opens; coin slot hidden in trunk under spare tire
PART #
DESCRIPTION
SUG. RETAIL
9904-0333
1972 Oldsmobile 442 convertible bank
$39.95
LIGHTING
BAR STOOL
•Features a three-color Drag Specialties
logo on the seat
•Highly polished chrome-plated pedestal
•Great for store counter or the shop
•Some assembly required
•Made in the U.S.A.
PART #
DESCRIPTION SUG. RETAIL
DS-900998
Bar stool
$74.95
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
4201-0086
CATALOG RACK
DRAG SPECIALTIES
LIGHTED SIGN
DRAG
SPECIALTIES
CANOPY
•10’ x 10’ Drag Specialties canopy
•The perfect item for any Drag Specialties dealer
PART #
DESCRIPTION
SUG. RETAIL
4030-0009
10’ x 10’ Drag
Specialties canopy
$249.95
•This eye-catching, back-lit sign is screen printed
with bright inks
•Vacuum-formed polystyrene plastic light box is
illuminated by one 18” straight flourescent bulb
with a styrene face panel
•Measures approximately 22” L x 12” H
PART #
DESCRIPTION
9903-0138
Drag Specialties
lighted sign
•Organize and display
your catalogs for easy access
•Constructed of heavy-gauge metal with end
wings for long life
•Inclined 30° for easy viewing
•Includes three 3.5” sections, four 2.25” sections
and three 1” sections; replacement sections also
available separately
•Made in the U.S.A.
NOTE: One catalog rack free with a $2,000
shippable order. Limit one per order, maximum
of three per dealer.
PART #
DESCRIPTION
SUG. RETAIL
4201-0086 Catalog rack
$208.95
4201-0171 Repl. 1” binder rack
4201-0172 Repl. 2.25” binder rack
4201-0173 Repl. 3.5” binder rack
-
All part numbers in BOLD MAGENTA are new for 2009.
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1261
SECTION
21
WINDSHIELDS
TOURING
BATTERY DISPLAY RACK
•Holds a great selection of Drag Specialties batteries
in less than two square feet of floor space
•Measures 241/2” L x 10” W x 47” H
•Easily assembled – no tools required
•Colorful header card included
LUGGAGE
NOTE: Ask your Drag Specialties sales representative
how to receive the battery display at no charge.
SEATS &
SISSY BARS
PART #
9903-0022
DRAG SPECIALTIES
OIL DISPLAY
EXHAUST
•Five-tray display showcases
Drag Specialties oils
and lubricants
•Contact your Drag Specialties
rep for information on how
to receive a free
promotional display
FUEL/AIR
SYSTEMS
PART #
9903-0103
ENGINE
DESCRIPTION
Battery display rack
BRAKE PAD DISPLAY RACK
•Wall-mount rack attaches to any
wood or cement surface, holds
approximately 200 sets of brake pads
or shoes, and includes all hardware
and anchors for mounting
PART # DESCRIPTION
DIS-11 Wall-mount rack
DESCRIPTION
Drag oil display
SUG. RETAIL
$272.95
TRANSMISSION
& DRIVELINE RE-ORDER INVENTORY TAGS
GASKETS
& SEALS
•Remember what Drag Specialties parts you need
to restock with these re-order inventory tags
PART #
DESCRIPTION
9904-0425 Drag Specialties re-order
inventory tags
SUG. RETAIL
BAGS
$3.95
•15” L x 18” W heavy-duty, 3-mil
plastic bags
•Feature Drag colors and emblem,
patch handles
•Box of 100
ELECTRICAL
DS-800108
PART #
DS-800096
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DESCRIPTION
Large shopping bags
SUG. RETAIL
$26.95
9904-0271
DRAG
SPECIALTIES
DEALER
BANNERS
DOOR/TRUCK DECALS
•Two-color plastic exterior banner
with four eyelets
9904-0571
•Sold each
PART #
DESCRIPTION
DS-800108
Drag banner, 11/2’ x 4’
DS-800109
Drag banner, 21/2’ x 8’
9904-0271
Drag/Rinehart banner, 11/2’ x 4’
9904-0571
Drag/Lindby engine guard banner, 3’ x 4’
•Show your loyalty
•Work great on windows, trailers and
SUG.
PART #
DESCRIPTION
RETAIL
DS-800115 3” decal (50-pk.) $15.95
DS-800116 6” decal (50-pk.)
22.95
DS-800117 9” decal (10-pk.)
27.95
DS-800118 12” decal (10-pk.) 27.95
SUG. RETAIL
$15.95
25.95
15.95
15.95
trucks
PART #
DS-800111
DS-800119
4320-0821
4320-0822
SUG.
DESCRIPTION
RETAIL
24” decal (ea.)
$9.95
42” decal (ea.)
24.95
4” L Python decal 6.95
6” L Python decal 6.95
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
9904-0509
FOOTRESTS
& LICENSE FLOOR MATS
rubber-backed floor mat
PLATE FRAMES •Industrial-grade,
•Measure 3’ W x 5’ L
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1262
PART #
9904-0509
DESCRIPTION
Drag Specialties
DRAG SPECIALTIES
CATALOGS/CATALOG
CD/PRICE LISTS
PART #
DESCRIPTION
9901-0651 2009 FatBook catalog
9901-0653 2009 FatBook CD
(10-pk.)
9901-0652 2009 dealer price list
9904-0021
SUG. RETAIL
$94.95
PART #
9904-0021
DESCRIPTION
Z1R
9904-0083
SUG. RETAIL
-
PART #
9904-0083
DESCRIPTION
ICON
SUG. RETAIL
-
•High-quality Bic® Clic pens with
Drag Specialties logo
•100 pens per box
PART #
DESCRIPTION
PRE116
Pens w/ Drag Specialties logo
SUG. RETAIL
$.50 (ea.)
CURRENT COMPUTER PRICE
DISKETTE OR CD
•Price list on 31/2” diskettes or CD
•Price part numbers at the touch of a button
•For use on any IBM®-compatible machine
PART #
PRICE-DISK
PRICE-DISK-D
DESCRIPTION
Drag/Parts Unlimited price CD
Drag only price disk
PENS
All part numbers in BOLD MAGENTA are new for 2009.
SECTION
21
WINDSHIELDS
PIAA BULB
CABINET DISPLAY
END-CAP DISPLAY
•An inexpensive yet effective way to display tires
•Holds approximately 20 to 30 tires and comes
with all mounting hardware
•One free tire rack with purchase of 50 tires;
limit three per dealer
•POP display features
a swivel base, locking
see-through doors
and product sales
information
on both sides
•Loaded display
features five bulbs
each of: Xtreme White
Anti-Vibration
H4 bulbs, Star White
Anti-Vibration
H4 bulbs, Super
Plasma GT-X
Anti-Vibration Twin
Beam H4 bulbs
•See your Drag Specialties representative for
more details
•Enhance visibility of
your K&N air filters, oil
filters, intake assemblies
or cleaning supplies
•Ideal for use on an endcap or against the wall
•Open construction
allows product
to be viewed from
all sides
•Powder-coated, black
steel with an embossed
aluminum K&N sign
•56” H x 24” W heavy-duty
construction includes
four adjustable shelves
•Free with $500 purchase of K&N products
•Available exclusively through your Drag
Specialties representative
PART #
DISTIRE
PART #
9903-0214
PART #
9903-0199
MERCHANDISER TIRE RACK
DESCRIPTION
Merchandiser tire rack
SUG. RETAIL
$138.95
DESCRIPTION
H4 bulb display
DESCRIPTION
End-cap display
9904-0229
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
9904-0228
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
9904-0260
9904-0230
ELECTRICAL
METAL TACKER SIGNS
SLATWALL DISPLAY
SADDLEMEN SIGN
SUG.
RETAIL
•Add visibility to your
K&N inventory
•Slatwall display holds 20-30 air
or oil filters and cleaning supplies
•Quickly mount to slatwall or gridwall
•Includes signage, two shelves and K&N catalog and
application information
•Does not include filter assemblies
•Free with $500 purchase of K&N products
$19.95
PART #
9903-0188
•Oval three-dimensional embossed
metal sign
•Features colorful Saddlemen logo
•Affix with included double-sided
tape or hang with a tack
•Dimensions: 16" x 10"
PART #
DESCRIPTION
9904-0221 Saddlemen
sign
DESCRIPTION
Slatwall display
•Promotional metal
tacker signs
•Made from die-cut and
embossed .025" aluminum
PART #
9904-02281
9904-02291
9904-0230
9904-0260
9904-0491
1
DESCRIPTION
Legend air
Built to ride
James Gaskets
Drag Specialties
Roland Sands Design
LIGHTING
9904-0491
DIMENSIONS
17.25" x 20"
15.125" x 20"
24" x 10"
7" x 23.5"
24" x 12"
SUG.
RETAIL
$16.95
16.95
16.95
16.95
16.95
Part of Independent Cycle.
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
CABLE RACK
•Single-tier wall rack measures
36" W and holds up to 200
cables on 20 slots
•Rack header can be used
to identify cables
PART #
K28-0000
DESCRIPTION
Single-tier cable rack
BRAKES
TANKS &
OIL FILTERS
SUG. RETAIL
$24.95
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
YUASA
BATTERY
DISPLAY RACK
POP FLOOR
DISPLAY
•The POP is a triangular
grid floor display
•Each side measures
5' H x 2' W
•Includes all necessary
materials and hooks
for assembly and display
PART #
9903-0104
DISPLAY RACK
•Wall-mount display
rack for DP Brakes
•Topped off by
a DP Brakes header
DESCRIPTION
Wall display
PART #
9903-0144
DESCRIPTION
SUG. RETAIL
Wall-mount display rack
$65.95
•Heavy duty steel
construction with
three large
wire shelves
•Includes wheel-kit
for easy mobility
•Shelf liners included
•Comes with
removable
application chart
for easy updating
•Measures 37" L x 15" W x 62" H
PART #
9903-0154
All part numbers in BOLD MAGENTA are new for 2009.
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
DESCRIPTION
Yuasa battery rack
COVERS,
SECURITY
& GENERAL
1263
SECTION
21
WINDSHIELDS
TOURING
V-TWIN
SPARK PLUG DISPLAY
•New display rack that holds
16 four-packs of NGK Iridium IX
spark plugs that fit virtually all
domestic V-Twin applications
•Free-standing
or wall-mountable
LUGGAGE
SEATS &
SISSY BARS
PART #
9903-0153
DESCRIPTION
NGK spark
plug cabinet
NGK WIRE
DISPLAY RACK
NGK DISPLAY
CABINET
•Holds 120 individual
plug boxes and
up to 12 different
part numbers
•Easy loading and dispensing
•Counter stand or slatwall mount
•Rugged steel wire rack with black powder-coat finish
•Measures 143/4" W x 133/4" H x 5" D
•Easy loading and
dispensing; will hold over 600 plugs
•Convenient storage in door for
application materials
•Mounts easily to any wall
•Rugged steel construction with gloss
black finish
•Measures 18" W x 23" H x 8" D
PART #
DIS-506
PART #
DIS-43
DESCRIPTION
Display rack
DESCRIPTION
Display cabinet
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
POINT OF
PURCHASE
FLOOR
DISPLAY
RACK
•Made of
powder-coated
heavy metal
•Features four
heavy-duty
shelves
•Header card is printed in a 4-color glossy finish
•Measures 80" tall x 42" wide x 18" deep
PART #
9903-0055
MOTOCAPS,
LOGOCAPS,
MOTOBOLTS
DISPLAY
SMARTSPAIR
DISPLAY
DESCRIPTION
Display rack
•Fits on counter
or slat wall
•Includes display and four
SmartSpair™ kits
•Increase your
impulse sales
with this
space-efficient
display rack
PART #
0363-0023
PART #
0303-0123
DESCRIPTION
SmartSpair display
DESCRIPTION
Display rack
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
TIRE SHOES
CABLES
•Great tool to boost
Pirelli sales
•Available at no charge
with purchase
of six tires
DISPLAY RACK
BRAKES
DISPLAY RACK
•Four-shelf display
draws customers'
attention to
S100 products
TANKS &
OIL FILTERS
PART #
DIS38
DASHES
& GAUGES
DESCRIPTION
S100
display rack
•For a limited time,
receive a free fivetray display rack
when you purchase
$600 worth of
Maxima lubricants
or pay just
$41.90 with
a $300 purchase
•Five-tray display
measures 251/2" x
161/2" x 55"
PART #
9903-0060
PART #
DIS15
FRAMES,
SUSPENSION
& FENDERS
DESCRIPTION
Pirelli tire shoes (pr.)
DESCRIPTION
Display rack
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1264
DISPLAYS
TIRE SHOES
•A great way to spice up the look of your shop
•Show your loyalty to your product
•Great tool to boost
Metzeler sales
•Available at no charge
with purchase of six tires
PART #
PRE-025
PART #
9903-0061
METZELER V-TWIN POSTER
DESCRIPTION
Metz V-Twin posters (ea.)
DESCRIPTION
Metzeler tire shoes (pr.)
•Enhance sales
with these
attractive
point-of-purchase
displays
PART #
9903-0004
9903-0005
All part numbers in BOLD MAGENTA are new for 2009.
DESCRIPTION
Header hooks, and gridwall
Hang strip