20043011, 20043111 Manual 110128JH.indd

ASSEMBLY, CARE & USE MANUAL
WARNING & SAFETY INFORMATION
MODELS 20043011, 20043111 CLASSIC BARREL GRILL
Masterbuilt Manufacturing, Inc.
1 Masterbuilt Court
Columbus, Georgia 31907
Customer Service 1-800-489-1581
Manual Code: 9804100070 110128-JH04
THIS PRODUCT IS FOR OUTDOOR USE ONLY
Tools required for assembly: Adjustable Wrench, Phillips Head Screwdriver.
CARBON MONOXIDE HAZARD
WARNING
Burning charcoal gives off carbon
monoxide, which has no odor and can
cause death.
This manual contains important
information necessary for the proper and
safe use of this grill.
DO NOT burn charcoal inside homes,
vehicles, tents, garages or any enclosed
areas.
Read and follow all warnings and
instructions before using grill and
during use.
Use only outdoors where it is well
ventilated.
Keep it for future reference.
Failure to follow these warnings and instructions properly could result in fire or explosion, which could cause
property damage, personal injury, or death.
GENERAL WARNING AND SAFETY INFORMATION
• Keep a fire extinguisher accessible at all times while operating grill.
LIMITED WARRANTY INFORMATION
Masterbuilt warrants its products to be free from defects in material and workmanship under proper assembly, normal
use and recommended care for 90 days from the date of original retail purchase.
Masterbuilt warranty does not cover paint finish as it may burn off during normal use.
Masterbuilt warranty does not cover rust of the unit.
• Never leave grill unattended while in use.
• Never use inside an enclosed area such as a patio, garage, building or tent.
• Never use inside a vehicle, not even a recreational vehicle such as a motorhome, camper, or truck bed.
• Never operate this grill under any overhead construction such as roof coverings, carports, awnings or overhangs.
Masterbuilt requires reasonable proof of purchase for warranty claims and suggests that you keep your receipt. Upon
the expiration of such warranty, all such liability shall terminate.
Within the stated warranty period, Masterbuilt, at its discretion, shall repair or replace defective components free of
charge with owner being responsible for shipping. Should Masterbuilt require return of component(s) in question for
inspection Masterbuilt will be responsible for shipping charges to return requested item.
This warranty excludes property damage sustained due to misuse, abuse, accident, damage arising out of
• Maintain a minimum distance of 10 ft. (3m) from all structures.
transportation, or damage incurred by commercial use of this product.
• Keep area clear of all combustible materials such as wood, dry plants, grass, brush, paper or canvas.
• Never operate this grill within 25 ft. (7.5m) of flammable liquids.
• Never operate this grill within 10 ft. (3m) of a gas cylinder.
• Never use this grill as a heater (READ CARBON MONOXIDE HAZARD).
• Use this grill only on a stable, level surface to prevent tipping.
This expressed warranty is the sole warranty given by Masterbuilt and is in lieu of all other warranties, expressed or
implied including implied warranty, merchantability, or fitness for a particular purpose.
Neither Masterbuilt nor the retail establishment selling this product, has authority to make any warranties or to promise
remedies in addition to or inconsistent with those stated above.
Masterbuilt’s maximum liability, in any event, shall not exceed the purchase price of the product paid by the original
consumer/ purchaser. Some states do not allow the exclusion or limitation of incidental or consequential damages. In
such a case, the above limitations or exclusions may not be applicable.
• Use on non-combustible surfaces such as dirt, concrete, brick or rock.
• Keep children and pets away from grill at all times. Do not allow children to use grill.
• Only use charcoal lighting fluid. Never use gasoline, alcohol or other highly volatile fluids to ignite charcoal.
These fluids can explode causing injury or death.
• Grill is HOT while in use and will remain HOT for a period of time afterwards. Do not touch any part of the grill
without wearing protective gloves.
• Never move grill when in use. Allow grill to cool completely before moving or storing.
California residents only: Not withstanding this limitation of warranty, the following specific restrictions apply; if
service, repair, or replacement of the product is not commercially practical, the retailer selling the product or
Masterbuilt will refund the purchase price paid for the product, less the amount directly attributable to use by the
original buyer prior to the discovery of the nonconformity. Owner may take the product to the retail establishment
selling this product in order to obtain performance under warranty.
This expressed warranty gives you specific legal rights, and you may also have other rights which vary from state to
state.
• Never leave HOT coals or ashes unattended.
• Do not store grill with HOT ashes or charcoal inside grill. Store only when fire is completely out and all surfaces
are cold.
Go Online www.masterbuilt.com
or complete and return to
Attn: Warranty Registration
Masterbuilt Mfg. Inc.
1 Masterbuilt Court - Columbus, GA 31907
• Dispose of cold ashes by placing them in aluminum foil, soaking with water and discarding in a non-combustible
container.
• Accessory attachments not supplied by Masterbuilt Outdoor Products© are not recommended.
• Never use this product for anything other than its intended purpose. This grill is not for commercial use.
• Always use this grill in accordance with all applicable local, state and federal fire codes.
Name:
WARNING
Combustion by-product produced when using this product contains
chemicals known to the State of California to cause birth defects,
other reproductive harm, or cancer.
The materials used in this product may contain lead a chemical known to the State of
California to cause birth defects and other reproductive harm.
1
Address:
City, State/Province, Postal Code:
Phone Number:
E-Mail Address:
Model Number:
Serial Number:
Purchase Date:
Place of Purchase:
18
PARTS LIST
APPROXIMATE GRILLING TIMES
BEEF
SIZE
GRILLING TIME
INTERNAL TEMP
/4” (2cm) thick
3 to 4 min. /side
med rare 145°F (62°C)
4 to 5 min. /side
med 160°F (71°C)
1” (2.5cm) cubes
3 to 4 min. /side
145°-160°F (62-71°C)
/2” (12mm) thick
3 to 4 min. /side
med 160°F (71°C))
4-6 lbs. (1.8-2.7kg)
18 to 22 min /lb.
145°-160°F (62-71°C)
Sirloin tip
3 1/2--4 lbs. (1.5-1.8kg)
20 to 25 min. /lb.
145°-160°F (62-71°C)
Ribs, back
cut in 1-rib portions
10 min. /side
med 160°F (71°C)
half, 2-3 lbs. (0.9-1.3kg)
10 to 12 min. /side
med rare 145°F (62°C)
whole, 4-6 lbs. (1.8-2.7kg)
12 to 15 min. /side
med 160°F (71°C)
SIZE
GRILLING TIME
INTERNAL TEMP
/4” (2cm) thick
3 to 4 min. /side
med 160°F (71°C)
1 1/2” (4cm) thick
7 to 8 min. /side
med 160°F (71°C)
/2-1 1/2 lbs. (0.2-0.6kg)
15 to 25 min. total
med 160°F (71°C)
2-4 lbs. (0.9-1.8kg)
1 1/2 to 2 hrs.
med 160°F (71°C)
Steaks
3
24
3
23
22
21
20
1
Kabobs
Hamburger patties
1
4
Roast, rolled rump
5
19
2
6
Tenderloin
18
17
PORK
Chops, bone-in
3
Chops, bone-out
Tenderloin
Ribs (indirect heat)
1
16
11
7
15
VENISON
Roast, saddle or leg
Steaks
SIZE
GRILLING TIME
INTERNAL TEMP
6-7 lbs. (2.7-3.1kg)
25 to 30 min. /lb.
145°-160°F (62-71°C)
/4” (2cm) thick
6 to 7 min. /side
med 160°F (71°C)
3
10
8
14
CHICKEN
SIZE
GRILLING TIME
INTERNAL TEMP
3-4 lbs. (1.3-1.8kg)
60 to 75 min.
in thigh 180°F (82°C)
Cornish hens
18-24 oz. (510-680g)
45 to 55 min.
in thigh 180°F (82°C)
Breast halves, bone-in
6-8 oz. ( 170-226g) each
10 to 15 min. /side
170°F (77°C)
Breast halves, boneless
4 oz. (113g) each
6 to 8 min. /side
Legs or thighs
4-8 oz. (113-226g)
Broiler fryer (indirect
heat)
Drumsticks
Wings
ITEM NO.
QUANTITY DESCRIPTION
13
9
ITEM NO.
12
QUANTITY DESCRIPTION
1
1
Grill Lid
13
2
Wheel
2
1
Grill Body
14
1
Storage Shelf
170°F (77°C)
3
3
Cooking Grate
15
1
Charcoal Pan
10 to 15 min. /side
180°F (82°C)
4
2
Air Damper
16
2
Charcoal Pan Lifter
4 oz. (113g)
8 to 12 min. /side
180°F (82°C)
5
1
Warming Rack
17
2
Side Shelf Bracket
6
1
Front Shelf
18
1
Side Shelf
2-3 oz. (56-85g)
8 to 12 min. /side
180°F (82°C)
7
2
Front Shelf Bracket
19
1
Smoke Stack
8
2
Right Short Leg
20
1
Temperature Gauge
9
2
Left Long Leg
21
1
Logo Plate
10
2
Leg Bracket
22
1
Lid Handle
11
1
Axle
23
1
Grease Clip
12
2
Axle Cap
24
1
Cooking Grate Lifting Tool
(included with model 20043011 only)
• When outside temperature is cooler than 65°F (18°C) and/or altitude is above 3,500 ft. (1067m),
additional cooking time may be required. To insure that meat is completely cooked
use a meat thermometer to test internal temperature.
• Lifting grill lid during cooking process may extend cooking time due to heat loss.
17
2
CHARCOAL LIGHTING INSTRUCTIONS
HARDWARE LIST
Read all instructions and warnings on charcoal bag and in manual before using.
BLISTER PACK CONTENTS
1. Stack briquets in a pyramid.
2. Add lighter fluid following directions on fluid container. Before lighting, place lighter
fluid at least 25 ft. (7.5m) away from grill. Do not lean over grill when lighting charcoal.
Light charcoal. LEAVE GRILL UNCOVERED.
(A)
M6x12
Phillips Head Screw
qty-17
(B)
M6x45
Phillips Head Screw
(C)
M6x70
Phillips Head Screw
qty-14
qty-2
3. In about 15 minutes, flames will die out and briquets will begin to ash over. Once the
briquets are completely ashed over, spread briquets in a single layer and begin cooking.
• NEVER USE GASOLINE TO LIGHT CHARCOAL.
• OVERFILLING CHARCOAL PAN CAN CAUSE SERIOUS INJURY AND DAMAGE THE
UNIT.
• NEVER ADD ADDITIONAL LIGHTER FLUID ONCE CHARCOAL HAS IGNITED.
• HOT COALS SHOULD NOT BE LEFT UNATTENDED.
• GRILL IS HOT. USE PROTECTIVE GLOVES AND LONG, STURDY COOKING UTENSILS.
(E)
M6
Lock Nut
qty-6
(D)
M6
Hex Flange Nut
qty-24
TO ENSURE THAT IT IS SAFE TO EAT, FOOD MUST BE COOKED TO THE MINIMUM INTERNAL
TEMPERATURES LISTED IN THE TABLE BELOW.
(F)
M6
Carriage Bolt
qty-2
(G)
M6
Flat Washer
qty-2
(H)
M6
Lock Washer
(I)
Cotter Clip
qty-2
USDA* Safe Minimum Internal Temperatures
Fish
145°F (63°C)
Pork
160°F (71°C)
Egg Dishes
160°F (71°C)
Steaks and Roasts of Beef, Veal or Lamb
145°F (63°C)
Ground Beef, Veal or Lamb
160°F (71°C)
Whole Poultry (Turkey, Chicken, Duck, etc.)
165°F (74°C)
qty-2
PRE-PACKED HARDWARE
Ground or Pieces Poultry (Chicken Breast, etc.) 165°F (74°C)
* United States Department of Agriculture
3
(J)
(L)
M5 Hex Nut
M5 Lock Washer
qty-2
qty-2
(K)
Wing Nut
(packed with temperature gauge)
qty-1
16
REPLACEMENT PARTS LIST
GRILL OPERATION CAUTIONS
• Avoid bumping or impacting grill.
• Keep your hands, hair and face away from burning charcoal.
STOP!
• This grill has an open flame. Be careful of loose hair and clothing during operation. They may
catch fire.
DO NOT RETURN TO RETAILER
For Assembly Assistance, Missing or Damaged Parts
Call: MASTERBUILT Customer Service at 1-800-489-1581
• Use protective gloves when handling this grill or working with fire. Use protective gloves or
long, sturdy fireplace tools when adding wood or charcoal.
• Do not allow anyone to conduct activities around this grill during or following its use until the
unit has cooled. This grill is HOT during operation and remains HOT for a period of time
following its use.
Model #20043011
ITEM NO.
DESCRIPTION
ITEM NO.
DESCRIPTION
• Fatty foods like hamburgers can have excess grease that can cause flare ups. When cooking
fatty foods, use caution when opening lid and during cooking to avoid being burned.
9904100072
Grill Lid Kit
9904100070
Grill Lid Kit
9904090071
Grill Body Kit
9904090084
Grill Body Kit
• Be careful when removing food from grill. All surfaces are HOT and may cause burns. Use
protective gloves or long, sturdy cooking tools.
9904090033
Logo Plate Kit
9904090033
Logo Plate Kit
9904090029
Lid Handle Kit
9904090029
Lid Handle Kit
9904090032
Temperature Gauge Kit
9904090032
Temperature Gauge Kit
• Never use glass, plastic or ceramic cookware on this grill.
990050018
Air Damper Kit
990050018
Air Damper Kit
• The use of alcohol, prescription or non-prescription drugs may impair the user’s ability to
properly assemble or safely operate this grill.
9904090079
Warming Rack Kit
9904090092
Warming Rack Kit
906050025
Axle Caps
906050025
Axle Caps
• Grill lid and body are HOT while in use and during cooling process.
9904100071
Smoke Stack Kit
9904100071
Smoke Stack Kit
9904090086
Side Shelf Kit
9904090086
Side Shelf Kit
9904090101
Side Shelf Support Kit
9904090101
Side Shelf Support Kit
• Air dampers are HOT while the grill is in use and during cooling; wear protective gloves when
adjusting.
9904090074
Front Shelf Kit
9904090087
Front Shelf Kit
9904090102
Front Shelf Support Kit
9904090102
Front Shelf Support Kit
• Never overfill charcoal pan. This can cause serious injury as well as damage the unit.
9904090090
Leg Bracket Kit
9904090090
Leg Bracket Kit
9904090076
Stationary Leg Kit
9904090089
Stationary Leg Kit
9904090075
Axle Leg Kit
9904090088
Axle Leg Kit
9004090104
Lower Shelf (no Hardware)
9004090116
Lower Shelf (no Hardware)
9904090091
Axle Kit
9904090091
Axle Kit
990050014
Wheel Kit
990050014
Wheel Kit
9004090103
Large Cooking Grate
906050023
Cooking Grate
990070057
Knockout Kit
990070057
Knockout Kit
906060213
Charcoal Grate
906050010
Charcoal Grate
906050011
Charcoal Grate Lifter
906050011
Charcoal Grate Lifter
• Do not remove adjustable charcoal pan while ashes and charcoal are HOT.
• Only use charcoal lighting fluid, never use gasoline, alcohol or other highly volatile fluids to
ignite the charcoal. These fluids can explode causing injury or death.
REMINDER:NEVER OPERATE THIS GRILL UNDER ANY OVERHEAD CONSTRUCTION.
MAINTAIN A MINIMUM DISTANCE OF 10 FEET FROM OVERHEAD CONSTRUCTION, WALLS
OR RAILS. SEE DIAGRAM BELOW.
Overhead
Construction
10 ft. (3m)
Rails
Wall
15
Model #20043111
9904100069
Hardware Bag
9904100069
Hardware Bag
9804100070
Instruction Manual English
9804100070
Instruction Manual English
9804100071
Instruction Manual Spanish
9804100071
Instruction Manual Spanish
906050013
Grease Clip
906050013
Grease Clip
906060212
Small Cooking Grate
906050024
Cooking Grate Lifting Tool
10 ft. (3m)
4
ASSEMBLY INSTRUCTIONS
Before assembly read
instructions carefully.
This unit is heavy. Do not
assemble without assistance.
8
9
Tools needed for assembly:
Adjustable Wrench
Phillips Head Screwdriver
Assemble grill on a clean, flat
surface.
CAUTION: Use caution during the
assembly process.
Some component are heavy.
FREQUENTLY ASKED QUESTIONS
Q: The paint finish inside my lid is peeling. What can I do?
You are seeing a deposit of grease and smoke that collects during normal use that resembles
paint. These carbon deposits are non-toxic, but you may want to regularly remove the
build-up. Remove buildup using a brass or stiff bristle brush before grilling. Future build-up
can be avoided by simply wiping the grill lid while slightly warm with a mild soap-and-water
solution.
Q: When can I put my meat on the grill?
Grill is ready for use when charcoal is ashed over and no visible flames are present.
Q: How do I regulate the heat on my grill?
Adjusting the dampers will increase and decrease airflow and heating.
STEP 1.
Pay close attention to when assembling grill legs. Right legs are
shorter to accommodate wheels.
Insert right short leg (8) into left long
leg (9) as shown.
Repeat step 1 to assemble second set
of legs.
SAFE STORAGE AND MAINTENANCE
• Inspect bolt, hex lock nut and hex flange nut tightness on a regular basis to ensure grill is in
safe working condition.
• ALWAYS allow grill to cool completely before handling.
STEP 2.
Steps 2-3 require assistance. Get a
helper!
Insert storage shelf (14) into holes of
assembled grill legs as shown.
• ALWAYS empty charcoal pan after use only when ashes have completely cooled.
This will help prolong charcoal pan life.
• Clean grill, including special surfaces such as cooking grates with mild cleaning
agents. Wipe outside of grill with damp rag. DO NOT use oven cleaner.
• ALWAYS cover and store cold grill in a protected area.
STORAGE SHELF
INSERTION HOLE
• Indoor storage of grill is permissible only if the charcoal has burned to a complete
ash AND is cold. Remember to remove cold ashes before storing.
• Grill is made of steel and may rust over time. If rusting occurs on outside surfaces,
clean area with sand paper or steel wool, then cover with heat resistant paint.
• If rusting occurs on the inside surface of grill, clean area with sandpaper or steel
wool, then coat with cooking oil.
• NEVER USE PAINT ON INSIDE SURFACES OF GRILL
9
8
14
14
5
STEP 17.
5
Secure warming rack (5) to rack support bolt (C) using lock nut (E) as
shown.
E
STEP 3.
Attach leg bracket (10) to right short
legs (8) as shown using phillips head
screws (B) and hex flange nuts (D).
10
Note: Be sure not to overtighten lock
nut, as rack is to mover freely.
D
Secure warming rack support arm
onto grill body (2) using phillips screw
(A) and hex lock nut (E).
A
2
Do not fully tighten screws at this
time.
B
Repeat step on opposite side.
E
STEP 18a.
FIGURE E
STEP 18a.
Position adjustable charcoal rack lifter (16) on
charcoal rack (15) as shown in Figure E.
Repeat step on opposite end.
8
16
15
STEP 18b.
16
Position charcoal tray lifter (16) on side supports in
grill body as shown. Use cooking grate lifting tool
(24) to place cooking grates (3) into grill body.
Note: Cooking grate lifting tool (24) included with
model 20043011 only.
STEP 4.
Insert axle (11) through holes on
short right legs (8). Slide wheel (13)
onto axle and secure using cotter clip
(I). Snap axle cap (12) onto end of
wheel assembly as shown.
STEP 18c.
Insert grease clip (23) up through large hole in
bottom of grill body. Engage clip end in small hole.
Position an empty metal container (not included) on
grease clip so it rests snugly. The container is
needed to collect grease run-off.
STEP 18b.
3
16
8
Repeat step on opposite side for
remaining wheel.
Note: Clip may require adjustment to fit diameter
of container.
Do not fully tighten screws at this
time.
STEP 18c.
11
24
23
12
GRILL IS READY FOR USE
13
13
I
6
10
STEP 5.
STEP 15.
Note: Attach only using
hardware shown.
Secure handle (22) to grill lid (1)
using flat washers (G) lock washers
(H) and hex flange nuts (D).
22
Use phillips head screws (B) and hex
flange nuts (D) on second hole in leg
bracket (10) to attach left long leg (9).
D
1
Do not attach hardware to first hole.
This will be used for side shelf attachment in STEP 9.
B
Do not fully tighten screws at this
time.
9
SECOND HOLE
G
H
D
A
STEP 16a.
STEP 6.
Place grill body (2) onto assembled
legs with smoker box opening on the
same side as the right short legs (8).
D
STEP 16a.
5
Insert warming rack support bolt (C) into hole on
the left side of grill lid (1). Thread hex flange nut
(D) onto bolt and tighten. Slide warming rack (5)
eyelet onto end of support bolt.
D
C
Tightly secure grill body to legs using
phillips head screws (B), and hex
flange nuts (D).
2
Attach grill body (2) to leg brackets (10)
using phillips head screws (A), and hex
flange nuts (D) as shown.
10
10
Do not fully tighten screws at this
time.
Note: Warming rack should have some play and
move freely.
1
STEP 16b.
D
STEP 16b.
C
Slide warming rack to the far left to but up
against grill lid.
1
B
5
9
D
7
On right side of grill lid (1) hold hex flange nut in
place with hand and thread rack support bolt (C)
through nut, guiding warming rack (5) onto support bolt as shown.
8
12
2
STEP 13a.
21
20
Carefully reposition grill as shown.
Insert temperature gauge (20) stem
through hole in grill lid. Secure with
wing nut (K).
STEP 7.
A
STEP 13b.
Insert alignment pins on back of logo
plate (21) through two holes above
temperature gauge (20).
Attach using lock washer (L) and hex
nut (J) as shown.
L
J
4
Note: Do not over tighten. Air
dampers should move freely.
Attach air damper (4) to body (2)
using phillips head screw (A) and
lock nut (E) as shown.
E
Repeat step on opposite side for
remaining air damper.
K
18
STEP 14.
Attach smoke stack (19) to grill using
phillips head screws (A) as shown.
STEP 8.
Note: Position brackets so sharper
angled ends are used to connect
to leg bracket.
Attach side shelf support brackets
(17) to side shelf (18) using phillips
head screws (A).
19
Do not fully tighten at this time.
A
17
A
11
8
STEP 9.
2
2
STEP 11.
Align holes on assembled side shelf
(18) with holes on grill body (2) and leg
bracket (10) as shown.
Align holes on assembled front shelf
(6) with holes on grill body (2) and
legs as shown.
18
Insert phillips head screw (A) through
holes on body (2) into side shelf (18).
Secure using hex flange nuts (D).
A
D
Attach shelf support brackets (17) to
top holes in leg bracket (17) using phillips head screws (B). Secure using hex
flange nuts (D).
10
Insert phillips head screw (A) from
inside grill body to front shelf (6).
Secure using hex flange nuts (D).
A
D
Attach shelf support brackets (7) to
grill legs using phillips head screws
(B). Secure using hex flange nuts (D).
7
Tighten all hardware at this time.
Do not fully tighten screws at this
time.
B
D
B
17
D
6
9
6
STEP 12.
Steps 12-15 require assistance.
Get a helper!
STEP 10.
Attach shelf support brackets (7) to
front shelf (6) using phillips head
screws (A).
Align grill lid (1) with grill body (2) as
shown. Secure grill lid (1) to grill body
(2) using carriage bolt (F).
Note: Position brackets so sharper
angled ends are used to connect to
grill legs.
A
Repeat step on opposite end.
Do not fully tighten at this time.
1
F
7
2
9
10