ReliOn UA-787REL Instruction manual

Digital Blood Pressure Monitor
Model UA-853
Instruction Manual
Original
Manuel d’instructions
Traduction
Manual de Instrucciones
Traducción
Manuale di Istruzioni
Traduzione
Bedienungsanleitung
Übersetzung
使用手冊
翻譯
1WMPD4001421C
Contents
Dear Customers.................................................................... 1
Preliminary Remarks ............................................................. 2
Precautions........................................................................... 2
Parts Identification................................................................ 3
Symbols................................................................................ 4
Operation Mode.................................................................... 5
Using The Monitor ................................................................ 6
Installing / Changing The Batteries .................................. 6
Connecting The Air Hose ................................................. 6
Connecting The AC Adapter ............................................. 6
Adjusting The Built-in Clock ............................................ 7
Setting Three Reminders .................................................. 7
Alarm ON/OFF Mark On The Display ................................ 8
Selecting the Correct Cuff Size ......................................... 8
Applying The Arm Cuff .................................................... 9
How To Take Proper Measurements ................................... 9
Measurement ................................................................... 9
After Measurement .......................................................... 9
Measurements .................................................................... 10
Normal Measurement..................................................... 10
Measurement With The Desired Systolic Pressure ........... 11
Notes For Proper Measurement ...................................... 11
Recalling Memory Data ....................................................... 12
Clearing the memory data.............................................. 12
Recalling Memory Data ....................................................... 13
What Is An Irregular Heartbeat ............................................ 14
Pressure Bar Indicator ......................................................... 14
WHO Classification Indicator ............................................... 14
About Blood Pressure.......................................................... 15
What Is Blood Pressure? ................................................. 15
What Is Hypertension And How Is It Controlled? ............. 15
Why Measure Blood Pressure At Home? .......................... 15
WHO Blood Pressure Classification ................................. 15
Blood Pressure Variations............................................... 15
Troubleshooting ................................................................. 16
Maintenance ....................................................................... 17
Technical Data .................................................................... 17
Dear Customers
Congratulations on purchasing a state-of-the-art A&D blood pressure
monitor, one of the most advanced monitors available today. Designed for
ease of use and accuracy, this device will facilitate your daily blood
pressure regimen.
We recommend that you read through this manual carefully before
using the device for the first time.
English
1
Preliminary Remarks
This device conforms to the European Directive 93/42 EEC for Medical
Products. This is made evident by the
mark of conformity.
(0123: The reference number to the involved notified body)
The device is designed for use on adults only, not newborns or infants.
Environment for use: The device is for use in the home healthcare
environment.
This device is designed to measure blood pressure and pulse rate of people
for diagnosis.
Precautions
Precision components are used in the construction of this device. Extremes
in temperature, humidity, direct sunlight, shock or dust should be avoided.
Clean the device and cuff with a dry, soft cloth or a cloth dampened with
water and a neutral detergent. Never use alcohol, benzene, thinner or other
harsh chemicals to clean the device or cuff.
Avoid tightly folding the cuff or storing the hose tightly twisted for long
periods, as such treatment may shorten the life of the components.
The device and cuff are not water resistant. Prevent rain, sweat and water
from soiling the device and cuff.
Measurements may be distorted if the device is used close to televisions,
microwave ovens, cellular telephones, X-ray or other devices with strong
electrical fields.
Used equipment, parts and batteries are not treated as ordinary household
waste, and must be disposed of according to the applicable local regulations.
When the AC adapter is used, make sure that the AC adapter can be
readily removed from the electrical outlet when necessary.
When reusing the device, confirm that the device is clean.
Do not modify the device. It may cause accidents or damage to the device.
To measure blood pressure, the arm must be squeezed by the cuff hard
enough to temporarily stop blood flow through the artery. This may cause
pain, numbness or a temporary red mark to the arm. This condition will
appear especially when measurement is repeated successively.
Any pain, numbness, or red marks will disappear with time.
Contraindications
The following are precautions for proper use of the device.
Do not apply the cuff to an arm with another medical electrical equipment
attached. The equipment may not function properly.
People who have a severe circulatory deficit in the arm must consult a
doctor before using the device, to avoid medical problems.
Do not self-diagnose the measurement results and start treatment by yourself.
Always consult your doctor for evaluation of the results and treatment.
Do not apply the cuff on an arm with an unhealed wound.
Do not apply the cuff on an arm receiving an intravenous drip or blood
transfusion. It may cause injury or accidents.
Do not use the device where flammable gases such as anesthetic gases
are present. It may cause an explosion.
Do not use the device in highly concentrated oxygen environments, such as a
high-pressure oxygen chamber or an oxygen tent. It may cause a fire or explosion.
English 2
Parts Identification
AM Button
PM Button
Air Connector Plug
Artery Position Mark
Proper Fit Range
MEMORY Button
INDEX
Index Mark
Arm Cuff
Display
Air Hose
Air Socket
START Button
(Orange illumination during the AM)
(Blue illumination during the PM)
Battery Compartment
Battery Cover
1.5V Batteries
(R6P, LR6 or AA)
DC Jack
Part of Display
Clock display
MEMORY
Pressure Bar Indicator
and
WHO Classification Indicator
Heart Mark
I.H.B. Indicator (Irregular heartbeat indicator)
English 3
Alarm ON/OFF mark
Battery Indicator
Systolic Pressure
Diastolic Pressure
Pulse Rate
Symbols
Symbols
Function / Meaning
Recommended Action
Standby and Turn the device on.
Battery installation guide
Direct current
SN
Serial number
Date of manufacture
Type BF: Device, cuff and tubing
are designed to provide special
protection against electrical shocks.
The indicator that appears while
Measurement is in
measurement is in progress. It
progress. Remain as
blinks when the pulse is detected.
still as possible.
Irregular Heartbeat indicator. (I.H.B.)
The indicator that appears when an
irregular heartbeat or any excessive
body movement is detected during
the measurement.
Previous measurements stored in
MEMORY.
The battery power indicator during
Full Battery
measurement.
Replace all batteries
Low Battery The battery is low when it blinks.
with new ones, when
the indicator blinks.
Try the measurement again.
Unstable blood pressure due to
movement during the measurement. Remain very still during
the measurement.
The systolic and diastolic values are
within 10 mmHg of each other.
The pressure value did not increase Fasten the cuff
during inflation.
correctly, and try the
measurement again.
The cuff is not fastened correctly.
PUL. DISPLAY ERROR
SYS.
DIA.
PUL./min.
AM
PM
The pulse is not detected correctly.
Systolic blood pressure in mmHg
Diastolic blood pressure in mmHg
Pulse per minute
Time in the morning
Time in the afternoon
Alarm ON/OFF mark
EC directive medical device label
WEEE label
English 4
If you want to stop the
sound, press any button.
Symbols
Function / Meaning
EU-representative
Manufacturer
Class II device
Recommended Action
Refer to instruction manual/booklet
Polarity of DC jack
Operation Mode
1. Normal Measurement With Storing Data (Refer to page 10)
Press the START button. Blood pressure is measured and data is stored
within the device. The device can store the last ninety sets of data in
memory.
2. Recalling The Data (Refer to pages 12 and 13)
Press the MEMORY button to recall the
data. The average data of all the previous
measurements and the number of data are
displayed, as indicated in the figure at the
right.
Further key operation will recall the average
data during the AM, the average data during
the PM and data of each measurement.
For details on recalling data, refer to
“Recalling Memory Data” on pages 12 and
13.
Press the MEMORY button
M
Averaged systolic
Averaged diastolic
Number of data
Average of
all the data
The device can store the last ninety sets of
data in memory.
3. Clearing The Data (Refer to page 12)
Press and hold the MEMORY button until the “
to clear the stored data.
” (memory) mark blinks
4. Measurement With The Desired Systolic Pressure
Refer to page 11 for the measurement with the desired systolic pressure.
English 5
Using The Monitor
Installing / Changing The Batteries
1. Slide the battery cover to open it.
2. Remove the used batteries and insert
new
batteries
into
the
battery
compartment as shown, taking care that
the polarities (+) and (-) are correct.
3. Slide the battery cover to close it.
Use only R6P, LR6 or AA batteries.
Step 2
Step 1
Step 3
CAUTION
Insert the batteries as shown in the battery compartment. If not, the device
will not work.
When
(LOW BATTERY mark) blinks on the display, replace all batteries
with new ones. Do not mix old and new batteries. It may shorten the
battery life, or cause the device to malfunction.
(LOW BATTERY mark) does not appear when the batteries are drained.
Battery life varies with the ambient temperature and may be shorter at low
temperatures.
Use the specified batteries only. The batteries provided with the device are
for testing monitor performance and may have a limited life.
Remove the batteries if the device is not to be used for a long time.
The batteries may leak and cause a malfunction.
Stored data are cleared when the batteries are removed.
Connecting The Air Hose
Insert the air connector plug into
the air socket firmly.
Air socket
Air connector plug
Connecting The AC Adapter
Insert the AC adapter plug into the DC jack.
Then, insert the AC adapter into an electrical outlet.
The AC adapter, the model TB-233, is sold
separately.
DC jack
AC adapter plug
English 6
Using The Monitor
Adjusting The Built-in Clock
The monitor has a built-in clock. We recommend that you adjust the clock
prior to use.
Press and hold
1. Press and hold the AM button until the digits start blinking.
the AM button
AM
2. Select the year using the PM button.
Press the AM button to set the current year and
move to month/day selection. The date can be
set anywhere between the years 2006 and 2056.
PM
Year
PM
3. Select the month using the PM button.
Press the AM button to set the current month and
move to day selection.
AM
Month
AM
PM
Day
4. Select the day using the PM button.
Press the AM button to set the current day and
move to hour/minute selection.
PM
AM
Hour
AM
5. Select the hour using the PM button.
Press the AM button to set the current hour and
move to minute selection.
PM
Minute
AM
6. Select the minute using the PM button.
Press the AM button to set the current minute
and activate the clock.
Clock
Press and hold
AM
Setting Three Reminders
This monitor has 3 reminder alarms. You can set
3 different reminder alarms within a 24-hour period.
1. Press and hold the AM button until the digits start
blinking. Then press the
MEMORY
button.
“P-1” is shown at the middle line of the display.
2. Select the hour using the PM button and press
the AM button to set the hour and move to minute
selection. Press the MEMORY button to complete
the reminder setting after selecting minute.
mark
3. Then the display shows “P-2” and the
for the second reminder. Repeat the above
process if you need a second reminder.
4. A third reminder can be set as well.
English 7
Press
M
PM
AM
First
buzzer
M
Second
buzzer
M
Third
buzzer
M
Using The Monitor
Alarm ON/OFF Mark On The Display
When the alarm is on, a “
” appears on the LCD. To turn the alarm off,
simply press the AM button once.
The alarm will sound for 1 minute. To stop the alarm sound, press any button once.
Selecting the Correct Cuff Size
Using the correct cuff size is important for an accurate reading. If the cuff is not
the proper size, the reading may yield an incorrect blood pressure value.
The arm size is printed on each cuff.
The index
and proper fit range, on the cuff, tell you if you are applying the
correct cuff. (Refer to "Symbols that are printed on the cuff". )
If the index
points outside of the range, contact your local dealer to purchase
a replacement cuff.
The arm cuff is a consumable. If it becomes worn, purchase a new one.
Arm Size
Recommended Cuff Size
32 cm to 45 cm
Large adult cuff
22 cm to 32 cm
Adult Cuff
18 cm to 22 cm
Small adult Cuff
Arm size: The circumference of the biceps.
Catalog Number
CUF-D-LA
CUF-D-A
CUF-D-SA
Symbols that are printed on the cuff
Symbols
Function/Meaning
Recommended Action
Set the
mark on the artery of
the upper arm or in line with the
ring finger on the inside of the arm.
Artery position mark
▲
REF
Index
Catalog number
Proper fit range for the adult cuff.
It's printed on the adult cuff.
Range to use the large adult cuff.
Use the large adult cuff instead
Over range printed on the adult cuff. of the adult cuff.
Proper fit range for the large adult cuff.
It's printed on the large adult cuff.
Under range printed on the adult cuff.
Proper fit range for the small adult cuff.
It's printed on the small adult cuff.
Range to use the adult cuff.
Use the adult cuff instead of the
It's printed on the large adult cuff.
large adult cuff.
Lot number
Proper fit range
Large
adult cuff
.
Proper fit range
Adult cuff
Proper fit range
Small adult cuff
English 8
Using The Monitor
Applying The Arm Cuff
1. Wrap the cuff around the upper arm,
about 1-2 cm above the inside of the
elbow, as shown.
Place the cuff directly against the
skin, as clothing may cause a faint
pulse, and result in a measurement
error.
Do not roll up shirtsleeve tightly
Cuff
Artery position mark
2. Constriction of the upper arm,
caused by tightly rolling up a
shirtsleeve, may prevent accurate
readings.
3. Confirm that the index
within the proper fit range.
1 to 2 cm
Secure the fabric
fastener firmly
Air hose
points
Index
and Proper fit range
How To Take Proper Measurements
For the most accurate blood pressure measurement:
Sit comfortably on a chair. Rest your arm on the table. Do not cross your
legs. Keep your feet on the floor and straighten your back.
Relax before measurement.
Place the center of the cuff at the same height as your heart.
Remain still and keep quiet during measurement.
Do not measure immediately after physical exercise or a bath. Rest before
taking the measurement.
Try to measure your blood pressure at the same time every day.
Measurement
During measurement, it is normal for the cuff to feel very tight. (Do not be
alarmed)
After Measurement
After measurement, press the START button to turn off the power.
Remove the cuff and record your data.
Note: The device has an automatic power shut-off function, which turns the
power off approximately two minute after measurement.
Allow at least three minutes between measurements on the same
person.
English 9
Measurements
Model UA-853 is designed to detect the pulse and to inflate the cuff to a
systolic pressure level automatically.
If your systolic pressure is expected to exceed 230 mmHg or you use the
optional small cuff, read "Measurement With The Desired Systolic Pressure"
on the next page.
Normal Measurement
1.
Place the cuff on the arm (preferably the left arm).
Sit quietly during measurement.
2.
Press the START button.
0 (zero) is displayed blinking briefly. Then
the display changes, as indicated in the
figure at the right, as the measurement
begins. The cuff starts to inflate. It is
normal for the cuff to feel very tight. A
pressure bar indicator is displayed, as in
the figure at the right, during inflation.
Press
Starts inflation
4.
5.
When inflation is complete, deflation starts
automatically and
(heart mark) blinks,
indicating that the measurement is in
progress. Once the pulse is detected, the
mark blinks with each pulse beat.
Note: If an appropriate pressure is not
obtained, the device starts to inflate
again automatically.
When the measurement is complete, the
systolic and diastolic pressure readings and
pulse rate are displayed. The cuff exhausts
the remaining air and deflates completely.
START
Zero display
Note: If you wish to stop inflation at any time,
press the START button again.
3.
At heart level
Pressurizing
Measurement
in progress
Systolic pressure
Diastolic pressure
WHO classification
Pulse rate
Press the START button again to turn off the power.
Exhausts remaining
air automatically
Note: Model UA-853 is provided with an automatic power shut-off
function. The clock display remains on the LCD. Allow at least ten
minutes between measurements on the same person.
English
10
Measurements
Measurement With The Desired Systolic Pressure
If your systolic pressure is expected to exceed 230 mmHg or you use the
optional small cuff, use this procedure.
1.
2.
3.
Place the cuff on the arm (preferably the left arm). At heart level
Press and hold the START button
until a number about 30 to 40 mmHg
Press and hold the button START
higher than your expected systolic
pressure appears.
Release the button
at the desired
Release the START button to start
systolic pressure
measurement, when the desired
number is reached. Then continue to
measure your blood pressure as
Refer to the previous page
described on the previous page.
for measurement
Notes For Proper Measurement
Sit down in a comfortable position. Place the arm to be used for the
measurement on a table or other support so that the center of the cuff
will be at the same height as your heart.
Relax for about five or ten minutes before taking a measurement. If you
are excited or depressed by emotional stress, the measurement will
reflect this stress as a higher (or lower) than normal blood pressure
reading and the pulse reading will usually be faster than normal.
An individual's blood pressure varies constantly, depending on what you
are doing and what you have eaten. What you drink can have a very
strong and rapid effect on your blood pressure.
This device bases its measurements on the heartbeat. If you have a very
weak or irregular heartbeat, the device may have difficulty determining
your blood pressure.
Should the device detect a condition that is abnormal, it will stop the
measurement and display an error symbol. Refer to page 4 for the
description of symbols.
This blood pressure monitor is intended for use by adults only. Consult
with your physician before using this device on a child. A child should not
use this device unattended.
English
11
Recalling Memory Data
Note: This device stores the last ninety measurements in memory. The data is
retained as long as the batteries are in the device. When you remove the
batteries or the batteries are drained, the data will be erased.
1. Press the MEMORY button.
Press the MEMORY button
2. The average data of all the measurements
and the number of data are displayed.
Then, each time the MEMORY button is
pressed, the memory data is displayed from
the most recent. After the last data is displayed,
the display returns to the clock display.
M
Averaged systolic
Averaged diastolic
Number of data
Average of
all the data
3. Press the following key to recall various data
when the average data of all the
measurements is displayed.
AM button
To recall the average data during the AM.
Then, each time the AM button is pressed, the memory
data taken during the AM is displayed from the most
recent. After the last data is displayed, the display
returns to the clock display
PM button
To recall the average data during the PM.
Then, each time the PM button is pressed, the memory
data taken during the PM is displayed from the most
recent. After the last data is displayed, the display
returns to the clock display
START button To display the clock.
When the MEMORY button is pressed at each display, the display returns
to the average data of all the measurements
For details on memory data recalling procedure, refer to the chart on the
next page.
Clearing the memory data
4. Press and hold the MEMORY button until the “
to clear the stored data.
” (memory) mark blinks
Note: Pressing the START button while the memory data is displayed
initiates the UA-853 to start taking a measurement.
English
12
Recalling Memory Data
Clock display
START
START
M
START
Average of all the data
Memory
display
AM
M
Average of
data taken
during the AM
AM data
PM
M
PM
AM
Average of
data taken
during the PM
PM data
All data
Average
Average
Average
AM
PM
M
Each time the button is pressed, the memory data is displayed
from the most recent.
Most recent
data taken
duirng the PM
Most recent
data taken
duirng the AM
AM
Most recent data
of all
M
PM
After the last data is displayed, the display returns to the clock
display.
English
13
What Is An Irregular Heartbeat
Model UA-853 blood pressure monitor provides a blood pressure and
pulse rate measurement even when an irregular heartbeat occurs. An
irregular heartbeat is defined as a heartbeat that varies by 25% from the
average of all heartbeats during the blood pressure measurement. It is
important that you be relaxed, remain still and do not talk during
measurements.
Note: We recommend contacting your physician if you see this
indicator frequently.
Pressure Bar Indicator
The indicator monitors the progress of pressure during measurement.
Pressurizing
Inflation in progress
Releasing air
Measurement in progress
Inflation complete
WHO Classification Indicator
Each segment of the bar indicator
corresponds to the WHO blood pressure
classification described on the next page.
WHO Classification Indicator
Severe hypertension
Moderate hypertension
Mild hypertension
High normal
Normal
Optimal
Moderate hypertension
Mild hypertension
: The indicator displays a segment, based
on the current data, corresponding to the
WHO classification.
English
Example:
14
High normal
About Blood Pressure
What Is Blood Pressure?
Blood pressure is the force exerted by blood against the walls of the
arteries. Systolic pressure occurs when the heart contracts. Diastolic
pressure occurs when the heart expands. Blood pressure is measured in
millimeters of mercury (mmHg). One's natural blood pressure is
represented by the fundamental pressure, which is measured first thing
in the morning while one is still at rest and before eating.
What Is Hypertension And How Is It Controlled?
Hypertension, an abnormally high arterial blood pressure, if left
unattended, can cause many health problems including stroke and heart
attack. Hypertension can be controlled by altering lifestyle, avoiding
stress, and with medication under a doctor’s supervision.
To prevent hypertension or keep it under control:
Do not smoke
Exercise regularly
Reduce salt and fat intake
Have regular physical checkups
Maintain proper weight
Why Measure Blood Pressure At Home?
Blood pressure measured at a clinic or doctor's office may cause
apprehension and can produce an elevated reading, 25 to 30 mmHg higher
than that measured at home. Home measurement reduces the effects of
outside influences on blood pressure readings, supplements the doctor's
readings and provides a more accurate, complete blood pressure history.
WHO Blood Pressure Classification
Diastolic blood pressure
Standards to assess high Reference Material: Journal of Hypertension 1999, Vol 17 No.2
blood pressure, without
Grade 3 hypertension (severe)
regard to age, have been
Grade 2 hypertension (moderate)
established by the World
Health Organization (WHO),
Grade 1 hypertension (mid)
as shown in the chart.
High-normal
Normal
Blood Pressure Variations
Optimal
An individual’s blood pressure
varies greatly on a daily and
Systolic blood pressure
seasonal basis. It may vary
by 30 to 50 mmHg due to various conditions during the day. In hypertensive
individuals, variations are even more pronounced. Normally, the blood
pressure rises while at work or play and falls to its lowest levels during sleep.
So, do not be overly concerned by the results of one measurement.
Take measurements at the same time every day using the procedure
English
15
Blood Pressure
described in this manual to get to know
your normal blood pressure. Regular
readings give a more comprehensive
blood pressure history. Be sure to note
date and time when recording your blood
pressure. Consult your doctor to interpret
your blood pressure data.
Typical fluctuation within a day
(Measured every five minutes)
Systolic
Diastolic
Sleep
Troubleshooting
Problem
Possible Reason
Recommended Action
Replace all batteries with new
Nothing
Batteries are drained.
ones.
appears on the
Reinstall the batteries with
display, even
Battery terminals are not negative and positive terminals
when the power
in the correct position.
matching those indicated on the
is turned on.
battery compartment.
Battery voltage is too low.
(LOW BATTERY mark)
The cuff does
Replace all batteries with new
blinks. [ If the batteries are
not inflate.
ones.
drained completely, the
mark does not appear.]
The cuff is not fastened
Fasten the cuff correctly.
properly.
You moved your arm or Make sure you remain very still
body during the
and quiet during the
The unit does
measurement.
measurement.
not measure.
Sit comfortably and still.
Readings are
The cuff position is not
Raise your hand so that the cuff
too high or too correct.
is at the same level as your heart.
low.
If you have a very weak or
irregular heat beat, the device
may have difficulty in
determining your blood pressure.
The value is different
Refer to “Why measure blood
from that measured at a
pressure at home”.
clinic or doctor’s office.
Other
Remove the batteries. Place
them back properly and try the
measurement again.
Note: If the actions described above do not solve the problem, contact the
dealer. Do not attempt to open or repair this product, as any attempt to
do so will make your warranty invalid.
English
16
Maintenance
Do not open the device. It uses delicate electrical components and an
intricate air unit that could be damaged. If you cannot fix the problem
using the troubleshooting instructions, request service from your dealer
or from the A&D service group. The A&D service group will provide
technical information, spare parts and units to authorized dealers.
The device was designed and manufactured for a long service life.
However it is generally recommended to have the device inspected
every 2 years, to ensure proper functioning and accuracy. Please contact
either your authorized dealer or A&D for maintenance.
Technical Data
Type
Measurement method
Measurement range
UA-853
Oscillometric measurement
Pressure: 20 - 280 mmHg
Pulse:
40 - 180 beats / minute
Measurement accuracy
Pressure: ±3 mmHg
Pulse:
±5%
Power supply
4 x 1.5V batteries (R6P, LR6 or AA) or
AC adapter (TB-233) (Not included)
Approx. 450 measurements, when AA Alkaline
Number of measurements
batteries are used, with pressure value of 180
mmHg at room temperature of 23°C
Classification
Internally powerd ME equipment (Supplied by
batteries)
Class II (Supplied by adapter)
Continuous operation mode
Clinical test
According to ANSI / AAMI SP-10 1992
EMC
IEC 60601-1-2: 2007
Memory
Last 90 measurements
Operating conditions
+10°C to +40°C / 15%RH to 85 %RH
800-1060hPa
Transport / Storage conditions -10°C to +60°C / 15%RH to 85 %RH
Dimensions
Approx. 150 [W] x 156 [H] x 126 [D] mm
Weight
Approx. 500 g, excluding the batteries
Applied part
Cuff Type BF
Useful life
Device: 5 years (when used six times a day)
Cuff: 2 years (when used six times a day)
English
17
Accessory AC adapter
TB-233
TB-233C
The adapter is to connect the blood pressure
monitor to a power source at home.
Please contact your local A&D dealer for
purchasing.
The AC adapter is required to be inspected or
replaced periodically.
Input: 100-240V
500mA
Output: 6V
139°C
TB-233BF
Input: 240V
Output: 6V
2A
500mA
139°C
2A
Accessories sold separately
Cuff
Catalog Number
Cuff Size
CUF-D-LA
Large adult cuff
CUF-D-A
Adult cuff
CUF-D-SA
Small adult cuff
AC adapter
Catalog Number
Plug
TB-233C
Type C
TB-233BF
Type BF
Arm Size
32 cm to 45 cm
22 cm to 32 cm
18 cm to 22 cm
Note: Specifications are subject to change without prior notice.
EMC table information is listed on our website:
http://www.aandd.jp/products/manual/medical/emc_acadapter_en.pdf
English
18
1-243 Asahi , Kitamoto-shi, Saitama 364-8585, JAPAN
Telephone: [81] (48) 593-1111
Fax: [81] (48) 593-1119
A&D INSTRUMENTS LIMITED
Unit 24/26 Blacklands Way, Abingdon Business Park, Abingdon, Oxfordshire OX14 1DY United Kingdom
Telephone: [44] (1235) 550420
Fax: [44] (1235) 550485
A&D ENGINEERING, INC.
1756 Automation Parkway, San Jose, California 95131, U.S.A.
Telephone: [1] (408) 263-5333
Fax: [1] (408)263-0119
A&D AUSTRALASIA PTY LTD
32 Dew Street, Thebarton, South Australia 5031, AUSTRALIA
Telephone: [61] (8) 8301-8100
Fax: [61] (8) 8352-7409