Siemens HiPath 3000 - Spectralink Support

Siemens Enterprise Communications
Test Report of Certification
SpectraLink 8440 VoWiFi Handset
with
HiPath 3000
Test Status: released
Release Date: January 23, 2012
Siemens Enterprise Communications GmbH & Co. KG 2011
Issued by:
Siemens Enterprise Communications GmbH & Co.KG
Hofmannstraße 51
D-81359 Munich
Siemens Enterprise Communications GmbH & Co. KG is a Trademark Licensee of Siemens AG
Copying of this document and giving it to others and the use or communication of the contents thereof, are forbidden without express
authority. Offenders are liable to the payment of damages. All rights reserved in the event of the grant of a patent or the registration of a
utility model or design.
Owner:
Eddy De Braekeleer
Siemens
Polycom SpectraLink 8440
Enterprise Communications
HiPath 3000 V8
Contents:
History of Change.............................................................................................................................................3
Overview ............................................................................................................................................4
1.1
Test Object .........................................................................................................................................4
1.1.1
1.1.2
Basic Equipment .................................................................................................................................4
Polycom VoWiFi ..................................................................................................................................4
1.2
Test Strategy .....................................................................................................................................4
1.2.1
1.2.2
Test Intensity .......................................................................................................................................5
Measuring / Test Instruments .............................................................................................................5
1.3
Realisation Data ................................................................................................................................5
1.4
Test Results Summary .....................................................................................................................5
1.4.1
1.4.2
1.4.3
Problems .............................................................................................................................................5
Restrictions .........................................................................................................................................5
Remarks ..............................................................................................................................................5
2
Configuration.....................................................................................................................................6
2.1
Polycom devices ...............................................................................................................................6
2.2
HiPath 3000 ........................................................................................................................................6
2.3
HiPath Wireless Controller ...............................................................................................................6
2.4
Configuration Block Diagram ..........................................................................................................6
3
Test Results in Detail ........................................................................................................................7
3.1
Tests ...................................................................................................................................................7
3.1.1
3.1.2
3.1.3
3.1.4
Connectivity and Basic Operation .......................................................................................................7
Basic call .............................................................................................................................................8
Telephony features .............................................................................................................................9
Audio features ...................................................................................................................................13
m
re
si
em
en
se
nt
er
p
ris
e.
co
er
om
cu
st
d
en
of
rio
re
at
h.
ip
th
ac
et
e
Configuration Data ..........................................................................................................................15
System Basics...................................................................................................................................15
Polycom VoWiFi ..............................................................................................................................15
ea
se
co
nt
HiPath 3000 ......................................................................................................................................15
4.2
4.2.1
Documentation ..................................................................................................................................15
4.3
Wireless network ............................................................................................................................15
5
Confirmation ....................................................................................................................................16
Pl
C
on
cr
4.1
4.1.1
ad
y@
na
ce
ts
en
m
pl
oy
Remarks ...........................................................................................................................................14
de
3.2
4
qu
ire
s
ad
di
tio
na
lt
ec
hn
ic
al
ve
rif
ic
a
tio
n!
1
Page 2 of 16
Siemens
Polycom SpectraLink 8440
Enterprise Communications
HiPath 3000 V8
History of Change
Description
Name
September 2011
Initial Version
Eddy De Braekeleer
SEN Service PS
E-Mail: eddy.debraekeleer@siemensenterprise.com
Phone: +32.2.406.7316
September 14 – 20
December 5-6, 2011
Certification tests
Karel Eeckelaert
E-Mail: karel.eeckelaert@siemensenterprise.com
Phone: +32.2.406.7119
Januari 9, 2011
Review Partner
Oliver Wick
Polycom
E-Mail: oliver.wick@Polycom.com
Phone: +49 811 9994-266
Januari 23, 2011
Final review
Januari 23, 2011
Release
se
ea
e.
ris
er
p
nt
se
en
em
si
co
er
om
cu
st
d
en
of
rio
co
nt
ac
th
ip
at
h.
re
ad
y@
na
ce
ts
en
m
pl
oy
de
et
e
cr
C
on
Pl
Page 3 of 16
Eddy De Braekeleer
SEN Service PS
E-Mail: eddy.debraekeleer@siemensenterprise.com
Phone: +32.2.406.7316
m
re
qu
ire
s
ad
di
tio
na
lt
ec
hn
ic
al
ve
rif
ic
a
tio
n!
Date
Eddy De Braekeleer
SEN Service PS
E-Mail: eddy.debraekeleer@siemensenterprise.com
Phone: +32.2.406.7316
Siemens
Polycom SpectraLink 8440
Enterprise Communications
1
Overview
1.1
Test Object
HiPath 3000 V8
tio
n!
1.1.1 Basic Equipment
HiPath 3000
Software Version:
H3K_V8_R5_7_ 0.107
Wireless
Controller
C2400: 07.11.02.0004
na
lt
ec
hn
ic
al
ve
rif
ic
a
Test system:
di
tio
1.1.2 Polycom VoWiFi
Test of interface functionality between the HiPath 3000 and the Polycom
SpectraLink VoWiFi handset
Test Equipment:
HiPath 3000 and the Siemens HiPath Wireless C2400 Controller and Access
Points (AP)
e.
om
HW / FW Release:
co
er
Software Release: 8440: V 4.0.0.20561
m
re
qu
ire
s
ad
Certification:
Description:
The 8440 VoWiFi handset functions as a SIP device registered on the
Openscape Voice Server.
Documentation:
- Configuration Manual: Polycom SpectraLink
Test Network:
Test network of HiPath Ready Lab Brussels
er
p
si
em
en
se
nt
d
en
of
rio
na
ce
ts
re
en
m
ad
y@
See section 2.3
Test
Configuration:
ip
at
h.
Test Strategy
pl
oy
1.2
ris
Polycom
cu
st
Manufacturer:
th
ac
Basic phone configuration and registration

Basic calls
co
nt

Telephony feature verification
se


Audio features, including codecs and DTMF

Basic WLAN test were performed
ea
Pl
C
on
cr
et
e
de
This certification test for the Polycom phones listed below with the Siemens HiPath 3000 V8 focused on the
verification of the SIP interface in the following scenarios:
Other scenarios, including data security / encryption and mass provisioning (via DLS) was not part of the
certification.
Regarding the compliance with acoustic standards no tests were performed.
Page 4 of 16
Siemens
Polycom SpectraLink 8440
Enterprise Communications
1.2.1
HiPath 3000 V8
Test Intensity
Scopes of the tests are to execute / to verify the solution performs within the limits of the system
requirements, targeting the end product. To accomplish this, feature and solution based test cases are
created, inspected, and executed under a real system environment (mirroring as close as possible real
customer's environment).
Measuring / Test Instruments
hn
1.2.2
ic
al
ve
rif
ic
a
tio
n!
Note:
The testing of the product with regard to compliance to requirements for Product Safety, EMV, Network
Access Interfaces and Radiation Protection were not performed.
Siemens Enterprise Communications therefore assumes no responsibility for the compliance to these
requirements.
di
tio
Realisation Data
ad
1.3
na
lt
ec
Tracing and monitoring available on all IP phones, servers, gateways and laptops. No special hardware
required.
September 2011
Test Duration:
september 14th – 20th, December 5-6, 2011
Test Location:
Siemens Enterprise Communications
Demeurslaan 134
1654 Huizingen
International Solution Lab
Test Personnel:
Siemens HiPath 3000:
Karel Eeckelaert
Coordination:
De Braekeleer Eddy
E-Mail: eddy.debraekeleer@siemens-enterprise.com
+32 2 406 7316
m
co
e.
ris
er
p
nt
se
en
em
si
Test Results Summary
at
h.
re
For details please have a look at the test results.
ip
pl
oy
m
en
ts
1.4
ad
y@
ce
na
rio
of
en
d
cu
st
om
er
re
qu
ire
s
Test Preparation:
th
ac
nt
ea
se
1.4.2 Restrictions
Pl
C
on
co
cr
et
e
de
1.4.1 Problems
1.4.3 Remarks
1) Certain tests failed due to the limited feature availability for SIP endpoints on the
HiPath 3000. This is specified in the tests.
Page 5 of 16
Siemens
Polycom SpectraLink 8440
Enterprise Communications
HiPath 3000 V8
2
Configuration
2.1
Polycom devices
tio
HiPath 3000
ic
a
2.2
n!
The Polycom devices have been configured according to the manual.
Access Points: AP3610
lt
-
na
HW Version : C2400
SW Version: V 7.41.05.003
Configuration Block Diagram
co
e.
ris
er
p
nt
se
en
em
si
ad
y@
re
at
h.
ip
th
ac
nt
se
ea
Pl
C
on
co
cr
et
e
de
pl
oy
m
en
ts
ce
na
rio
of
en
d
cu
st
om
er
m
re
2.4
qu
ire
s
ad
-
ec
HiPath Wireless Controller
di
tio
2.3
hn
ic
al
ve
rif
HW Version: HiPath 3000 V8
SW Version: H3K_V8_R5_7_ 0.107
-
Ax = +3223830-395/396 = Polycom SpectraLink handsets = DUT (device under test)
Oy = +3223830-390/391/393 = OptiPoint 500 / OpenStage IP phones
Eu = external PSTN phone u
x, y, z, u are digits from 0 to 9
Page 6 of 16
Siemens
Polycom SpectraLink 8440
Enterprise Communications
HiPath 3000 V8
Test Results in Detail
3.1
Tests
tio
n!
3
rif
ve
ic
al
Ax = +3223830-395/396 = Polycom SpectraLink handsets = DUT (device under test)
Oy = +3223830-390/391/393 = OptiPoint 500 / OpenStage IP phones
Eu = external PSTN phone u
ic
a
The syntax of the abbreviations used in the test cases :
lt
ec
hn
x, y, z, u are digits from 0 to 9
di
tio
Result
qu
ire
Connect a PC to the lab LAN and verify that access to the
GUI of the test phone is possible.
3
Program the phone via GUI with the HiPath 3000 registrar
information and verify that the phone registers
OK
Change the OSV subscriber settings so that Digest
Authentication is required for the registration. Verify that
the phone does not register.
OK
ts
e.
ris
er
p
nt
se
en
em
si
OK
OK
re
en
m
OK
The first node of the H3K is put in service again, which
means that on the first node the registrar IP address is
coming up.
NA
The DUT is registered on the same number as the
O1 phone. This can be used to use the two phones
in parallel (like is done sometimes with a hardphone
and a soft client).
NA
se
co
nt
ac
th
ip
at
h.
NA
Pl
ea
OK
The first node of the H3K is put out of service, which
means that on the second node the backup registrar IP
address is coming up.
pl
oy
de
et
e
8
cr
co
er
om
cu
st
d
en
of
rio
Verify that the test phone displays the local date and time
correctly that is provided by the lab’s SNTP server
(10.10.1.12).
7
9
ad
y@
ce
na
Add the information for HTTP Digest Authentication to
the test phone settings and verify that the phone registers
6
m
2
re
Power up the handset and verify that the phone obtains a
valid IP address from the DHCP server.
5
Comment
s
Test Description
1
4
on
ad
Test
Case
C
na
3.1.1 Connectivity and Basic Operation
Page 7 of 16
No forking possible on
HiPath 3000
Siemens
Polycom SpectraLink 8440
Enterprise Communications
HiPath 3000 V8
3.1.2 Basic call
For every test the HTTP Digest Authentication was enabled on the IP phones.
11
From the previous test case answer the call at
A2 and verify speech path between both
phones. Verify that the phone displays show the
correct information after the call connected.
ic
a
m
e.
ris
A2 shows missed call
nt
er
p
Only number is shown, not
name. This is a limitation of the
HiPath 3000
OK
si
em
en
se
en
of
rio
OK*
OK
at
h.
re
ad
y@
na
ce
ts
en
m
pl
oy
OK*
Only number is shown on DUT,
not name. This is a limitation of
the HiPath 3000
th
ip
From the previous test case answer the call at
O1 and verify speech path between both
phones. Verify that the phone displays show the
correct information after the call connected.
OK
co
nt
ac
de
OK
co
er
cu
st
17
Initiate a call from the DUT to internal
subscriber O1. Verify that O1 is ringing (DUT
receives ring back) and that the displays on the
DUT and O1 show the correct called/calling
number/name information.
d
16
From the previous test case disconnect the call
at the DUT and verify that both phones return to
idle state.
et
e
ve
rif
qu
ire
Initiate a call from A2 to the DUT. Verify that the
DUT is ringing (A2 receives ring back) and that
the displays on the DUT and A2 show the
correct called/calling number/name information.
15
cr
19
Pl
ea
se
on
C
al
ic
hn
ad
OK
s
Repeat the previous call, but disconnect the
DUT before A2 answers. Verify that the DUT
returns to idle state.
From the previous test case answer the call at
the DUT and verify speech path between both
phones. Verify that the phone displays show the
correct information after the call connected.
18
ec
di
tio
na
From the previous test case disconnect the call
at the DUT and verify that both phones return to
idle state.
om
14
OK*
Only number is shown, not
name. This is a limitation of the
HiPath 3000
OK
re
13
Comment
tio
10
Initiate a call from the DUT to internal
subscriber A2. Verify that A2 is ringing (DUT
receives ring back) and that the displays on the
DUT and A2 show the correct called/calling
number/name information.
12
Result
n!
Test Description
lt
Test
Case
20
21
From the previous test case disconnect the call
at the DUT and verify that both phones return to
idle state.
OK
Repeat the previous call, but disconnect the
DUT before O1 answers. Verify that the DUT
returns to idle state.
OK
O1 shows missed call
OK*
Only number is shown on DUT,
not name. This is a limitation of
the HiPath 3000
Initiate a call from O1 to the DUT. Verify that the
DUT is ringing (O1 receives ring back) and that
the displays on the DUT and O1 show the
correct called/calling number/name information.
Page 8 of 16
Siemens
Polycom SpectraLink 8440
Enterprise Communications
HiPath 3000 V8
32
at
h.
OK
th
ip
OK
nt
ac
Initiate a call from internal subscriber A2 to the
DUT. Answer the call at the DUT. From the DUT
put A2 on hold and verify that it receives Musicon-hold.
OK
Initiate a call from the DUT to internal subscriber
A2. Answer the call at A2. Put the DUT on hold
and verify that it receives Music-on-hold.
OK
From the previous test case retrieve the DUT
from hold and verify speech path between the
DUT and A2.
Page 9 of 16
n!
tio
ic
a
rif
ris
e.
m
re
er
p
se
Result
si
re
ad
y@
ce
ts
m
From the previous test case retrieve the DUT
from hold and verify speech path between the
DUT and A2.
pl
oy
C
se
ea
Pl
31
OK
Initiate a call from the DUT to internal subscriber
A2. Answer the call at A2. Put the DUT on hold
and verify that it receives Music-on-hold.
co
30
on
cr
et
e
de
29
em
na
rio
Test Description
en
28
en
Test
Case
ve
na
di
tio
OK
nt
d
of
en
3.1.3 Telephony features
cu
st
om
er
27
lt
ec
hn
ic
From the previous test case answer the call at
the DUT and verify speech path between both
phones. Verify that the phone displays show the
correct information after the call connected.
OK
qu
ire
26
OK
From the previous test case answer the call at
the external phone and verify speech path
between both phones. Verify that the phone
displays show the correct information after the
call connected.
Initiate a call from an external number to the
DUT. Verify that the DUT is ringing (external
phone receives ring back) and that the displays
on the DUT and the external phone show the
correct called/calling number.
ad
25
OK
al
24
Initiate a call from the DUT to an external
number. Verify that the external phone is ringing
(DUT receives ring back) and that the displays
on the DUT and the external phone show the
correct called/calling number.
OK
s
23
From the previous test case disconnect the call
at the DUT and verify that both phones return to
idle state.
co
22
From the previous test case answer the call at
the DUT and verify speech path between both
phones. Verify that the phone displays show the
correct information after the call connected.
OK
Comment
Siemens
Polycom SpectraLink 8440
Enterprise Communications
HiPath 3000 V8
34
From the previous test case retrieve DUT from
hold and verify speech path between the DUT
and A2.
OK
ic
a
tio
Initiate a call from the DUT to internal subscriber
O1. Answer the call at O1. Put the DUT on hold
and verify that it receives Music-on-hold.
rif
35
OK
n!
33
Initiate a call from internal subscriber A2 to the
DUT. Answer the call at the DUT. From the A2
put DUT on hold and verify that A2 receives
Music-on-hold.
m
OK
er
p
ris
e.
OK
OK
nt
se
en
em
si
OK
OK
ip
at
h.
re
ad
y@
ts
en
m
pl
oy
OK
th
From the previous test case dial O1 at the DUT.
Answer the call at O1. Verify that the DUT can
toggle between A2 and O1.
OK
co
nt
ac
de
et
e
cr
ec
s
qu
ire
re
er
om
cu
st
d
en
of
rio
na
43
Initiate a call from internal subscriber A2 to the
DUT. Answer the call and initiate consultation
at the DUT. Verify that A2 receives Music-onhold while the DUT receives dial tone.
ce
42
se
on
ea
45
Pl
C
OK
Initiate a call from the DUT to internal subscriber
A2. Answer the call and initiate consultation at
A2. Verify that the DUT receives Music-on-hold.
From the previous test case return from
consultation and verify speech path between the
DUT and A2.
44
lt
40
From the previous test case retrieve the DUT
from hold and verify speech path between the
DUT and O1.
na
39
Initiate a call from internal subscriber O1 to the
DUT. Answer the call at the DUT. From the DUT
put O1 on hold and verify that it receives Musicon-hold.
di
tio
38
From the previous test case retrieve the DUT
from hold and verify speech path between the
DUT and O1.
ad
37
hn
OK
Initiate a call from internal subscriber O1 to the
DUT. Answer the call at the DUT. From the DUT
put O1 on hold and verify that it receives Musicon-hold.
41
ic
al
From the previous test case retrieve the DUT
from hold and verify speech path between the
DUT and O1.
co
36
ve
OK
46
From the previous test case initiate a
supervised transfer at the DUT so that A2 and
O1 are connected. Verify that A2 and O1 have
speech path, the displays are correct, and that
the DUT returns to idle state.
OK*
Displays are updated but DUT
only shows number, not name
(HiPath 3000 limitation)
OK*
Displays are updated but DUT
only shows number, not name
(HiPath 3000 limitation)
Initiate a supervised transfer at the O1 so that
the DUT and O2 are connected. Verify that the
DUT and O2 have speech path, the displays are
correct, and that the DUT returns to idle state.
Page 10 of 16
Siemens
Polycom SpectraLink 8440
Enterprise Communications
HiPath 3000 V8
ea
se
n!
tio
ic
a
rif
ve
al
ic
co
e.
ris
NOK
HiPath 3000 does not
support blind transfer.
se
nt
er
p
HiPath 3000 does not
support blind transfer.
si
em
OK
ip
at
h.
re
OK
OK
Only master shows
conference, other parties
show call to master
nt
co
56
Pl
NOK
ac
th
de
et
e
cr
on
C
HiPath 3000 does not
support blind transfer.
m
re
er
om
ts
m
en
Initiate a call from the DUT to the internal
subscriber O1. Answer the call and initiate a
three-way conference from the DUT
(conference master) with A1. Verify that all
parties have speech path and that the displays
on the phones indicate the conference.
From the previous test case release the
conference master (= DUT). Verify that the O1
and A1 are in two-party talk and the displays are
updated accordingly.
pl
oy
55
ad
y@
na
rio
Initiate a call to the DUT from an external
number. Answer the call, then disconnect. Verify
that the external number can be called from the
call history list.
ce
54
en
of
53
en
d
cu
st
52
hn
ec
lt
NOK
qu
ire
51
HiPath 3000 does not
support blind transfer.
NOK
na
50
OK
di
tio
49
Initiate a call from the DUT to internal subscriber
A1. Answer the call and initiate consultation at
the DUT. Dial O1 and perform a blind transfer
from A1 to O1. Answer O1 and verify that A1
and O1 have speech path, the displays are
correct, and that the DUT returns to idle state.
Initiate a call from the O1 to the DUT. Answer
the call on the DUT. Perform a blind transfer
from the DUT to O2. Answer O2 and verify that
O1 and O2 have a speech path, the displays are
correct, and that the DUT returns to idle state.
Initiate a call from the DUT to the O2. Answer
the call on O2. Perform a blind transfer from
O2 to O3. Answer on O3 and verify that O3 and
the DUT have a speech path, the displays are
correct, and that the O2 returns to idle state
Initiate a call from the internal subscriber O1 to
the O2. Answer the call on O2. Perform a blind
transfer from O2 to the DUT. Answer on the
DUT and verify that O1 and the DUT have a
speech path, the displays are correct, and that
the O2 returns to idle state
From the previous test case invoke the last
number redial function on the DUT and verify
that it calls O1.
OK
ad
48
From the previous test case initiate a
supervised transfer at the DUT so that O1 and
O2 are connected. Verify that O1 and O2 have
speech path, the displays are correct, and that
the DUT returns to idle state.
s
47
From the previous test case dial O1 at the DUT.
Answer the call at O1. Verify that the DUT can
toggle between O1 and O2.
57
Initiate a call from the O1 to the internal
subscriber DUT. Answer the call and initiate a
three-way conference from the O1 (conference
master) with A1. Verify that all parties have
speech path and that the displays on the phones
indicate the conference.
Page 11 of 16
NOK
OK
Calls are terminated.
Only master shows
conference, other parties
show call to master
Siemens
Polycom SpectraLink 8440
Enterprise Communications
63
Call the DUT from O1 after the Do-Not-Disturb
function was activated via a service code. Verify
that the call is rejected (system based DND).
OK*
System based DND not available
for SIP-clients. Device based
DND was successfully tested.
Activate call forwarding (CFU) on the H3K to
A1. Call the DUT from O1 and verify that the call
is forwarded to A1 (system based forwarding).
OK
65
Activate call forwarding (CFNR) on the DUT to
A1. Call the DUT from O1 and verify that the call
is forwarded to A1 (device based forwarding).
66
Activate call forwarding (CFB) on the DUT to
A1. Call the DUT from O1 and verify that the call
is forwarded to A1 (device based forwarding).
tio
ve
NOK
Device-based forwarding is not
supported for SIP-devices on
H3K
NOK
Pick-up is not supported
for SIP-devices on H3K
ris
e.
co
NOK
Device-based forwarding is not
supported for SIP-devices on
H3K
er
p
nt
se
rif
ic
a
m
re
er
om
cu
st
d
en
en
em
si
ad
y@
na
NOK
Device-based forwarding is not
supported for SIP-devices on
H3K
re
at
h.
m
hn
OK
th
ip
OK
nt
OK
O1 has call waiting disabled. O1 is on the call
with O2 and the DUT tries to call O1.
co
ea
se
70
Pl
C
on
cr
et
e
69
From the previous test case accept the waiting
call and verify that speech path is established
between the DUT and A1. Verify that O1 is put
on hold.
ac
de
pl
oy
68
en
ts
ce
67
rio
of
Put the DUT and O1 in the same pickup group.
Call O1 from A2. While O1 is ringing, dial the
Group Pick-up code (*57) from the DUT and
verify that speech path to A2 is established and
the display shows correct caller information.
Call the DUT from O1. While connected, call the
DUT from A1 and verify that a call waiting
indication is presented on the DUT that shows
the calling party information.
ic
al
OK
qu
ire
64
ec
Activate call forwarding (CFNR) on the H3K to
A1. Call the DUT from O1 and verify that the call
is forwarded to A1 (system based forwarding).
Activate call forwarding (CFB) on the H3K to
A1. Call the DUT from O1 and verify that the call
is forwarded to A1 (system based forwarding).
Activate call forwarding (CFU) on the DUT to
A1. Call the DUT from O1 and verify that the call
is forwarded to A1 (device based forwarding).
n!
No visual feedback on DUT, only
auditory.
lt
62
OK
Call the O1 from the DUT after the Do-NotDisturb function was activated on O1. Verify
that the call is rejected (phone based DND).
na
61
Displays are not updated.
di
tio
60
OK*
ad
59
From the previous test case release the
conference master (= O1). Verify that the DUT
and A1 are in two-party talk and the displays are
updated accordingly.
s
58
HiPath 3000 V8
71
72
OK
User hears busy tone on the
DUT.
OK
User hears short bust tone and
call ends.
NA
H3K does not support call
deflection.
Call O1 from the DUT and reject the call at O1.
Verify that the DUT indicates the call rejection.
Call O1 from the DUT and deflect the call to O2.
Verify that the DUT indicates the call deflection.
Page 12 of 16
Siemens
Polycom SpectraLink 8440
Enterprise Communications
n!
tio
ic
a
rif
ve
al
ic
hn
lt
m
co
SIP-endpoints in MLHG is
not supported on H3K
ris
er
p
OK
se
Result
Comment
si
re
ad
y@
ce
ts
m
OK
th
ip
at
h.
Configure the DUT for DTMF transmission via
RFC 2833. Verify that from and to the DUT
DMTF “telephony events” are sent.
pl
oy
C
se
Pl
ea
83
NOK
Configure A2 to use the G.729A codec only. Call
the DUT from A2 and verify that the connection
is established with G.729A (use Wireshark).
OK
nt
ac
Configure the DUT for DTMF transmission via
RFC 2833. Verify that the Xpressions voicemail
system can be accessed via DTMF.
co
82
on
cr
et
e
de
81
em
na
rio
Test Description
en
80
en
Test
Case
OK
nt
d
en
of
3.1.4 Audio features
e.
om
er
Large conference call between O1, O2, O3, A1,
A2 and A2 (up to 5 parties involved). The
conference initiator is O1.
cu
st
79
ec
OK
re
78
OK
na
77
The O1 subscriber does call the DUT. The DUT
does not answer and the O1 comes into the
voice mailbox of the DUT. The O1 subscriber
leaves a voice message. The DUT receives a
MWI. The DUT calls the call-back number of
XPR and reads its message. After reading and
deleting its message the MWI is turned off.
The DUT is put in an MLHG (multi-line hunt
group) together with O1, and A2.
OK
di
tio
76
From the previous test case retrieve the
voicemail message and verify that the MWI is
turned off.
While the MWI is lit on the DUT, disconnect the
DUT from power and force a reboot. Verify that
after the reboot is complete, the MWI is turned
on.
While the MWI is lit on the DUT, reboot the
Xpressions Compact. Verify that after the reboot
is complete, the MWI is turned on.
ad
75
OK
s
74
Make the DUT busy and then call it from A2.
Verify that the call is forwarded to the voicemail
system (Xpressions Compact) and that the
message waiting indication (MWI) on the DUT
is turned on.
qu
ire
73
HiPath 3000 V8
Configure the DUT for DTMF transmission via
RFC 2833. Verify that the DTMF tones are sent
to and received from the PSTN.
Page 13 of 16
OK
OK
Remark: gateway supports RFC
2833
Siemens
Polycom SpectraLink 8440
Enterprise Communications
HiPath 3000 V8
3.2 Remarks
Meanings of Abbreviations:
Test case successful
NOK
Test case NOT successful
NA
Test case not applicable
NP
Test case not processed
NS
Situation not supplied
N *X
Error / restriction with description
*X
Remark to Functionality
DUT
Device Under Test
CFU
Call Forwarding Unconditional
CFNR
Call Forwarding on No Reply
CFB
Call Forwarding on Busy
MLHG
Multi Line Hunt Group
MoH
music-on-hold
DND
Do Not Disturb
AP
Access Points
Page 14 of 16
co
e.
ris
er
p
nt
se
en
em
si
ad
y@
re
at
h.
ip
th
ac
nt
se
ea
Pl
C
on
co
cr
et
e
de
pl
oy
m
en
ts
ce
na
rio
of
en
d
cu
st
om
er
m
re
qu
ire
s
ad
di
tio
na
lt
ec
hn
ic
al
ve
rif
ic
a
tio
n!
OK
Siemens
Polycom SpectraLink 8440
Enterprise Communications
HiPath 3000 V8
4
Configuration Data
4.1
HiPath 3000
4.1.1
System Basics
tio
ic
a
Polycom VoWiFi
al
Documentation
Page 15 of 16
co
e.
ris
er
p
nt
se
en
em
si
ad
y@
re
at
h.
ip
th
ac
nt
se
ea
Pl
C
on
co
cr
et
e
de
pl
oy
m
en
ts
ce
na
rio
of
en
d
cu
st
om
er
m
re
Wireless network settings (Siemens and Polycom):
See Attachment WLAN_Config_C2400.pdf
s
ad
Wireless network
qu
ire
4.3
di
tio
na
lt
ec
Polycom Documentation is downloadable from the Polycom Support website.
hn
ic
4.2.1
ve
rif
4.2
n!
The Polycom SpectraLink devices were configured as regular SIP-users.
Siemens
Polycom SpectraLink 8440
Enterprise Communications
5
HiPath 3000 V8
Confirmation
rif
Karel Eeckelaert
SEN Belgium
Page 16 of 16
co
e.
ris
er
p
nt
se
en
em
si
ad
y@
re
at
h.
ip
th
ac
nt
se
ea
Pl
C
on
co
cr
et
e
de
pl
oy
m
en
ts
ce
na
rio
of
en
d
cu
st
om
er
m
re
qu
ire
s
ad
di
tio
na
lt
ec
hn
ic
al
ve
Oliver Wick
Polycom
ic
a
tio
n!
Testing personnel confirms that all the test cases were performed and that the results were as described in
this document.