Electrolux SANTO 72398-6 KA User manual

SANTO 72398-6 KA
User manual
Electronic-Fridge
Dear Customer
Thank you for choosing one of our high-quality products.
With this appliance you will experience the perfect combination of
functional design and cutting edge technology.
Our appliances are engineered to deliver the best performance and control
- indeed we are setting the highest standards of excellence.
In addition to this you will find environmental and energy saving aspects as
an integral part of our products.
To ensure optimal and regular performance of your appliance please read
this instruction manual carefully. It will enable you to navigate all processes
perfectly and most efficiently.
To refer to this manual any time you need to, we recommend that you to
keep it in a safe place, and please pass it to any future owner of the
appliance.
We wish you much joy with your new appliance.
The following symbols are used in this manual
Important information concerning your personal safety and information on
how to avoid damaging the appliance
General information and tips
Environmental information
2
Contents
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Appliance Packaging Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Disposal of old Appliances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Remove transport safeguard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Fitting the Door Handle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Prior to Inital Start-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Starting up - setting the temperature . . . . . . . . . . . . . . . . . . . . . . . .9
Interior Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Storage shelves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Bottle Holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Quick chill shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Bottle and Can Holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Dismantling of the Bottle and Can Holder . . . . . . . . . . . . . . . . . . . . . .13
Door rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Installation of the carbon filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Changing the carbon filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Fresh food refrigeration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Defrosting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Switching off the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Cleaning and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Energy Saving Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
What to do if . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Correcting Malfunctions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Changing the light bulb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Service and Spare Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Customer Care Department . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Guarantee Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Installation - Electrical Connection . . . . . . . . . . . . . . . . . . . . . . . .22
Positioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Rear spacer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Rehingeing the door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Regulations, Standards, Guidelines . . . . . . . . . . . . . . . . . . . . . . . . .26
3
Safety
The safety aspects of our refrigerators/freezers comply with accepted
technical standards and the German Appliance Safety Law. Nevertheless, we
consider it our obligation to make you aware of the following safety
information:
Intended use
• The refrigerator is intended for use in the home. It is suitable for cooling
food. If the appliance is used for purposes other than those intended or
used incorrectly, no liability can be accepted by the manufacturer for any
damage that may be caused.
• Alterations or changes to the freezer are not permitted for reasons of safety.
• If you use the refrigerator in a commercial application or for purposes
other than the cooling of foods, please observe all valid legal regulations
for your application.
Prior to initial start–up
• Check the refrigerator for transport damage. Under no circumstance
should a damaged appliance be plugged in! In the event of damage, please
contact the retailer.
Refrigerant
The refrigerant isobutane (R600a) is contained within the refrigerant circuit
of the appliance, a natural gas with a high level of environmental
compatibility, which is nevertheless flammable.
• During transportation and installation of the appliance, be certain that
none of the components of the refrigerant circuit become damaged.
• If the refrigerant circuit should become damaged:
– avoid open flames and sources of ignition;
– thoroughly ventilate the room in which the appliance is situated.
Safety of children
• Packaging (e.g. wraps, polystyrene) can be dangerous for children. There is
a risk of suffocation! Keep packaging material away from children!
• Please make old appliances unusable prior to disposal. Pull out the mains
plug, cut off the mains cable, break or remove spring or boltcatches, if
fitted. By doing this you ensure that children cannot lock themselves in
the fridge when playing (there is risk of suffocation!)or get themselves
into other dangerous situations.
• This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
4
Children should be supervised to ensure that they do not play with the
appliance. !
Daily Operation
• Do not operate any electrical appliances in the refrigerator (e.g. electric
ice cream makers, mixers etc.).
• Before cleaning the appliance, always switch it off and unplug it, or pull
the house fuse or switch off the circuit breaker.
• When unplugging always pull the plug from the mains socket, do not pull
on the cable.
In case of malfunction
• If a malfunction occurs on the appliance, please look first in the "What to
do if ..." section of these instructions. If the information given there does
not help, please do not perform any further repairs yourself.
• Refrigerators/freezers may only be repaired by qualified service engineers.
Improper repairs can give rise to significant hazards. If your appliance needs
repairing, please contact your local Service Force Centre.
Disposal
Appliance Packaging Information
All materials are environmentally sound! They can be dumped or burned at
an incinerating plant without danger!
About the materials: The plastics can be recycled and are identified as
follows:
>PE< for polyethylene, e.g. the outer covering and the bags in the interior.
>PS< for polystyrene foam, e.g. the pads, which are all free of
chlorofluorocarbon.
The carton parts are made from recycled paper and should be disposed of
at a waste-paper recycling collection location.
Disposal of old Appliances
For environmental reasons, refrigeration appliances must be disposed of
properly. This applies to your old appliance, and - at the end of its service
life - your new appliance as well.
Warning! Before disposing of old appliances make them inoperable. Remove
plug from mains, sever the power cable, remove or destroy any snap or latch
closures. This eliminates the danger that playing children can lock
themselves inside the appliance (danger of suffocation!) or place themselves
in any other life-endangering situations.
Disposal:
• The appliance may not be disposed of with domestic waste or bulky refuse.
• The refrigerant circuit, especially the heat exchanger at the back of the
appliance, must not be damaged.
5
• The symbol
on the product or on its packaging indicates that
this product may not be treated as household waste. Instead it
should be handed over to the appropriate collection point for the
recycling of electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent potential
negative consequences for the environment and human health,
which could otherwise be caused by inappropriate waste handling of
this product. For more detailed information about recycling of this
product, please contact your local council, your household waste
disposal service or the shop where you purchased the product.
Remove transport safeguard
The appliance and the interior fittings are protected for transport.
•Remove all adhesive tape and packing pieces from the interior of the
appliance.
A
Your appliance is equipped with shelf
retainers that make it possible to
secure
the
shelves
during
transportation.
B
To remove them proceed as follows:
Move the shelf retainers in the
direction of the arrow, raise the shelf
C
from the rear and push it forward
until it is freed and remove the
retainers.
6
Fitting the Door Handle
1.
Screw the top handle
bracket to the handle rod
(1). Fit the bottom handle
bracket on the lower lefthand side of the door (2).
2.
Fit the top handle bracket
on the top left-hand side
of the door (3) and screw
the handle rod to the
bottom handle bracket (4).
Attention!
Do not overtighten the
screws (max. 2 Nm) as you
may damage the door
handles.
7
Electrical connection
Before initial start-up, refer to the appliance rating plate to ascertain if
supply voltage and current values correspond with those of the mains at the
installation location.
e.g.:
AC
230 ... 240 V
50 Hz or
230 ... 240 V~ 50 Hz
(i.e. 230 to 240 volts alternating current, 50 Hertz)
The rating plate is inside the appliance on the left.
A correctly installed, earthed socket is required for the electrical supply. The
supply must have a fuse rating of at least 10 Amps.
If the socket is not accessible once the appliance is built in, the electrical
installation must include suitable means of isolating the appliance from the
mains (e.g. fuse, cut-out, current trip or similar with a minimum contact
separation of 3 mm).
Attention: it must be possible to disconnect the appliance from the mains
power supply; the plug must therefore be easily accessible after the
installation.
Attention: If the supply cord is damaged, it must be replaced by a special
cord or assembly available from the manufacturer or its Service Agent.
Prior to Initial Start–Up
• Please clean the appliance interior and all accessories prior to initial startup (see section: “Cleaning and Care”).
Control panel
A
A.
B.
C.
D.
E.
F
8
BC D E
F
Button ON/OFF
Temperature setting button (for warmer temperatures)
Temperature display
Temperature setting button (for colder temperatures)
COOLMATIC function and COOLMATIC indicator (yellow)
ALARM OFF button and red warning light
Temperature setting buttons
•
•
The temperature is adjusted using the “B“ and “D“ buttons. These buttons
are connected to the temperature display.
The temperature display is switched over from the display of the ACTUAL
temperature (Temperature display is illuminated) to the display of the
DESIRED temperature (Temperature display flashes) by pressing one of the
two buttons, “B“ or “D“ .
Each time one of the two buttons is pressed again the DESIRED temperature
is adjusted by 1 °C. The DESIRED temperature must be reached within 24
hours.
If neither button is pressed, the temperature display automatically switches
back after a short period (approx. 5 sec.) to the display of the ACTUAL
temperature.
DESIRED temperature means:
The temperature that has been selected for inside the fridge. The DESIRED
temperature is indicated by flashing numbers.
ACTUAL temperature means:
The temperature display indicates the current temperature inside the fridge.
The ACTUAL temperature is indicated with illuminated numbers.
Temperature display
•
•
The temperature display can indicate several pieces of information.
During normal operation, the temperature currently present in the fridge
(ACTUAL temperature) is displayed.
When the temperature is being adjusted a flashing display indicates the
fridge temperature currently set (DESIRED temperature).
ALARM OFF button
With the ALARM OFF button, the acoustic warning signal can be switched
off, e.g. the "Open Door" warning when loading or rearranging food to be
chilled.
Starting Up - Setting the Temperature
1.
2.
3.
4.
Plug the mains plug into the mains socket.
Press button (A). The appliance starts.
Press either the “B“ or “D“ button. The temperature display switches over
and the DESIRED temperature currently set flashes on the temperature
display.
Set the required temperature by pressing the “B“ or “D“ buttons (see section
"Temperature setting buttons"). The temperature display will immediately
show the changed setting. Each time the button is pressed the temperature
9
5.
is adjusted by 1 °C.
From a food safety point of view +5 °C should be considered sufficiently
cold for storing food in the fridge.
Once the required temperature has been set, after a short period (approx. 5
sec.) the temperature display will change and again indicate the current
ACTUAL temperature inside the fridge. The display will change from flashing
to continuous illumination.
Information! When the setting is changed, the compressor does not start
immediately if automatic defrosting is currently taking place. As the storage
temperature within the fridge is reached quickly you can store food
immediately after switching on.
COOLMATIC
1.
2.
The COOLMATIC function is suited for quick cooling of large quantities of
goods in the refrigerator.
The COOLMATIC function is switched on by pressing the COOLMATIC
button. The yellow light illuminates. The COOLMATIC function now provides
for intensive cooling. A DESIRED temperature of +2 °C is automatically
selected. The COOLMATIC function is ended automatically after a period of
6 hours.
The COOLMATIC function can be ended manually at any time by pressing
the COOLMATIC button again. The yellow light goes out.
QUICK CHILL
The quick chill function can be used for the fast cooling of drinks in cans or
bottles in the fast cool storage tray or of larger amounts of room-tempera
ture food. The built-in charcoal filter reduces the development of any smell.
Chilling of cans or bottles
Place cans or bottles in the holder
on the fast cool storage tray in front
of the fan grille. Turn the fan
regulator to maximum and press the
MIN
COOLMATIC button. The yellow
MAX
indicator light comes on.
Chilling of food
Place the food in the fridge.
Open the fan regulator to maximum and press the COOLMATIC button.
The yellow indicator light comes on.
When the drinks or the food is sufficiently cooled, press the COOLMATIC
button again. The yellow indicator light goes out. Set the fan regulator to
the minimum position.
10
"Open Door"- Warning
If the fridge door is left open for longer than 5 minutes the red warning
display will flash and an acoustic warning tone will sound.
If you need more time to load or rearrange refrigerated foods, you can
switch off the warning tone by pressing the ALARM OFF button. The red
warning display will go off when the door is closed.
Holiday Mode
In the holiday mode the temperature for the refrigerator is approximately
+15 °C. In the holiday mode it is therefore possible to leave the door of the
empty refrigerator closed during periods of extended absence. Advantage:
Unintentional, or accidental closing of the door by persons who have access
to your home during your absence, is no longer possible. Without activating
the holiday mode, leaving the door closed would lead to the accumulation
of odours and mould.
After emptying and cleaning the appliance, proceed as follows:
1. To set the holiday mode, press the “ +” (WARMER) or “-“ (COLDER) button. The temperature display will change and indicate in flashing numbers
the DESIRED temperature that is currently set.
2. Hold down the “+“ (WARMER) button until the temperature display
indicates H (for holiday). The temperature shown in the temperature display
will change in steps of 1 °C until it reaches +8 °C. After +8 °C the value +15
°C will appear in the display with the letter H. The fridge is now operating
in energy-saving holiday mode.
3 To switch the fridge back to normal operation, press the “-“ (COLDER)
button.
Important! Do not store any goods in the refrigerator when the holiday
mode is in operation. The temperature is regulated at about +15 °C when
the holiday mode is in operation. This is too warm for food products.
11
Interior Accessories
Storage shelves
• You should always slide one of the full size glass storage shelf into the
lowest set of guides, above the fruit and the vegetable containers, and
keep it in this position.
• The height of the storage shelves
can be adjusted:
• To do this pull the storage shelf
forward until it can be swivelled
upwards or downwards and
removed.
• Please do the same in reverse to
insert the shelf at a different
height. Slide the front half of the
shelf in another level to the rear. To
D338
gain space to place tall items on
the storage shelf below.
Adjusting the upper door rack
Bottle holder
Place the bottles (with the opening
facing front) in the pre- positioned
shelf.
If the shelf is positioned horizontally,
place only closed bottles.
This bottle holder shelf can be tilted
in order to store previously opened
bottles.
To do this, pull the shelf up so it can
rotate upwards and be placed on the
next higher level.
12
Quick Chill Shelf
The quick chill shelf can be placed
in the upper groove.
Bottle and Can Holder
The side of the bottle and can
holder is moveable to enable a more
flexible placement of cans and
bottles in front of the grid. To allow
the holder to be moved easier when
moving sideways, press the shelf
backwards.
The bottle support can be pulled out
when chilling larger bottles.
Dismantling of the Bottle and Can Holder
Take out the quick chill shelf with
holder from the cabinet.
To loosen the holder from the shelf,
bend the hooks/brackets that
surround the backside of the shelf.
Depending on the food stored, the upper door racks can be changed to
other holders or removed. Take out the food, press the door racks digonally
upwards at their edges, reposition them, and press them back into place.
13
Installation of the carbon filter
On delivery the carbon filter is
placed in a plastic bag to secure
the length of the carbon filter
life. The filter should be placed
behind the grill before the
cabinet is turned on.
The cover can be opened by
turning the cover outward. The
carbon filter is then mounted in
the slot found in the back, see the
illustration.
1
The filter should be handled
carefully so fragments don´t
loosen from the surface.
Changing the carbon filter
To maintain the best performance
the carbon filter should be changed once a year with normal
usage. New carbon filters can be
purchased from your local dealer.
The filter is placed behind the grill
and can be reached by opening
the cover. The cover can be
opened by turning the cover
outward
The carbon filter is then pulled
out of its slot .
The new carbon filter is placed in
the existing slot.
The filter should be handled
carefully so fragments do not
loosen from the surface.
14
1
Fresh food refrigeration
To obtain the best performance:
• do not store warm food or evaporating liquid in the refrigerator
• do cover or wrap the food, particularly if it has a strong flavour.
• Position food so that air can circulate freely round it.
Useful hints:
Meat (all types): wrap in polythene bags and place on the glass shelf above
the vegetable drawer(s)For safety, store in this way only one or two days
at the most.
Cooked foods, cold dishes, etc: these should be covered and may be placed
on any shelf.
Fruit and vegetables: these should be thoroughly cleaned and placed in the
special drawer(s) provided.
Butter and cheese: these should be placed in special airtight containers or
wapped in aluminium foil or polythene bags to exclude as much air as
possible.
Milk bottles: these should have a cap and should be stored in the bottle
rack in the door.
Bananas, potatoes, onions and garlic, if not packed, must not be kept in
the refrigerator.
Defrosting
Refrigerator
Frost is automatically eliminated from the evaporator of the refrigerator
compartment every time the motor compressor stops, during normal use.
The defrost water drains out through a channel into a special container at
the back of the appliance, over the motor compressor, where it evaporates.
15
Switching off the appliance
1.
2.
3.
4.
1. To switch off, press the ON/OFF button. This will result in a countdown
from "3" to "1" taking place in the temperature display. On reaching "1" the
fridge will switch off. The temperature display will go off.
The appliance is only completely disconnected from the electricity supply
when the power plug has been removed from the power outlet.
Note:
The appliance cannot be switched on or off if unplugged, or if there is no
power being supplied to it.
Following connection to the mains power supply, the appliance returns to
the same operating state as before the interruption of main power.
If the appliance is not going to be used for an extended period:
Remove all refrigerated and deep-frozen packages as well as ice trays.
Switch off the appliance by pressing the ON/OFF button (A).
Remove the mains plug or switch off or turn out the circuit breaker or fuse.
Leave the door open to avoid the build up of odours.
Cleaning and Care
For hygienic reasons the appliance interior, including interior accessories,
should be cleaned regularly.
Warning!
• The appliance may not be connected to the mains during cleaning. Danger
of electrical shock! Before cleaning switch the appliance off and remove
the plug from the mains, or switch off or turn out the circuit breaker or
fuse.
• Never clean the appliance with a steam cleaner. Moisture could
accumulate in electrical components, danger of electrical shock! Hot
vapours can lead to the damage of plastic parts.
• The appliance must be dry before it is switched back on.
Attention!
• Ethereal oils and organic solvents can attack plastic parts, e.g.
– lemon juice or the juice from orange peals;
– butyric acid;
16
1.
2.
3.
4.
5.
6.
– cleansers which contain acetic acid.
Do not allow such substances to come into contact with appliance parts.
• Do not use any abrasive cleansers.
Remove the food from the refrigerator.
Switch the appliance off and remove the plug from the mains, or switch off
or turn out the circuit breaker or fuse.
Clean the appliance and the interior accessories with a cloth and lukewarm
water. Commercially available dish washing detergents may also be used.
After cleaning wipe with clean water and rub dry.
Accumulation of dust at the condenser increases energy consumption. For
this reason carefully clean the condenser at the back of the appliance once
a year with a soft brush or a vacuum cleaner.
Check the water drain hole on
the rear wall of the fridge. Clear a
blocked drain hole with the aid of
the green peg in the pack of
accessories included with the
appliance.
After everything is dry place
appliance back into service.
D037
Energy Saving Tips
• Do not install the appliance near cookers, radiators or other sources of
warmth. High ambient temperatures cause longer, more frequent
operation of the compressor.
• Ensure sufficient air circulation and exhaust at the appliance base
and at the back wall of the appliance. Never cover air vent openings.
• Do not place warm foods into the appliance. Allow warm foods to cool
first.
• Only leave door open as long as necessary.
• Do not set temperature any colder than necessary.
• Put frozen food in the fridge to defrost. The cold in the frozen food will
then be used to cool the fridge.
• Keep the heat emitting condenser and the metal grille on the rear wall of
your appliance clean at all times.
17
What to do if ...
Correcting Malfunctions
A malfunction may be caused by only a minor fault that you can rectify
yourself using the following instructions. Do not perform any other work on
the appliance if the following information does not provide assistance in
your specific case.
Warning! Repairs to refrigerators/freezers may only be performed by
qualified service engineers. Improper repairs can give rise to significant
hazards for the user. If your appliance needs repairing, please contact your
local Service Force Centre.
Malfunction
Possible Cause
Remedy
Appliance is not switched on Switch on the appliance.
Mains plug is not plugged in
Insert mains plug.
or is loose.
Appliance does not work.
Check fuse, replace if
Fuse has blown or is defective.
necessary.
Mains malfunctions are to be
Socket is defective.
corrected by an electrician.
Turn the temperature
Appliance cools too much.
Temperature is set too cold. regulator to a warmer setting
temporarily.
Temperature is not properly Please look in the "Initial Start
adjusted.
Up" section.
Door was open for an
Open the door only as long as
extended period.
necessary.
The food is too warm.
A large quantity of warm food Turn the temperature
was placed in the appliance
regulator to a colder setting
within the last 24 hours.
temporarily.
The appliance is near a heat Please look in the "Installation
source.
location" section.
Interior lighting does not
Please look in the "Changing
Light bulb is defective.
work.
the Light Bulb" section.
Carefully warm the leaking
sections of the door seal with
a hair dryer (not hotter than
Door seal is not air tight
Heavy build up of frost,
(possibly after changing over approx. 50 °C). At the same
possibly also on the door seal.
time shape the warmed door
the hinges).
seal by hand such that it sits
correctly.
18
Malfunction
Possible Cause
Appliance is not level.
Remedy
Readjust the feet.
The appliance is touching the
Move the appliance slightly.
wall or other objects.
Unusual noises.
A component, e.g. a pipe, on
If necessary, carefully bend
the rear of the appliance is
the component out of the
touching another part of the
way.
appliance or the wall.
The compressor does not start
This is normal, no error has
immediately after changing
occurred.
the temperature setting.
The compressor starts after a
period of time.
Water on the floor or on
storage shelves.
See the "Cleaning and Care"
section.
Water drain hole is blocked.
Changing the light bulb
1.
2.
3.
4.
5.
6.
Warning! There is a risk of electric shocks! Before changing the light bulb,
switch off the appliance and unplug it, or pull the fuse or the circuit breaker.
Light bulb data: 220-240 V
To switch off the appliance, push the
button (A).
Unplug the mains plug.
To change the light bulb press on the
rear hook and at the same time slide
the cover in the direction indicated
by the arrow.
Change the defective light bulb with
one of the some power (the
maximum power is shown on the
light diffuser).
Refit the light bulb cover.
Put the refrigerator back into
operation.
19
Service and Spare Parts
In the event of your appliance requiring service, or if you wish to purchase
spare parts, please contact your local Service Force Centre by telephoning:
0870 5 929929
Your telephone call will be automatically routed to the Service Force Centre
covering your post code area.
For address of your local Service Force Centre and further information
about Service Force, please visit the website at www.serviceforce.co.uk.
Before calling out an engineer, please ensure you have read details under
the heading “Something Not Working”.
When you contact the Service Force Centre you will need to give following
details:
1.Your name, address and post code
2.Your telephone number
3.Clear and concise details of the fault
4.The model and serial number of the apliance. (found on the rating plate).
5.The purchase date
Please note that a valid purchase receipt or guarantee documentation is
required for in-guarantee service calls.
Customer Care Department
For general enquiries concerning your AEG-Electrolux appliance or for
futher information on AEG-Electrolux products, please contact our
Customer Care Department by letter or telephone at the address below
or visit our website at www.aeg-electrolux.co.uk.
Customer Care Department
AEG-Electrolux Major Appliances
Addington Way
Luton
Bedfordshire
LU4 9QQ
Tel: 08705 350 350*
*calls to this number may be recorded for training purposes
20
GUARANTEE CONDITIONS
Standard guarantee conditions
We, AEG-Electrolux, undertake that if within 12 months of the date of the purchase this
AEG-Electrolux appliance or any part thereof is proved to be defective by reason only of
faulty workmanship or materials, we will, at our discretion repair or replace the same FREE
OF CHARGE for labour, materials or carriage on condition that:
· The appliance has been correctly installed and used only on the electricity or gas supply
stated on the rating plate.
· The appliance has been used for normal domestic purposes only, and in accordance with
the manufacturer's operating and maintenance instructions.
· The appliance has not been serviced, maintained, repaired, taken apart or tampered with by
any person not authorised by us.
· All service work under this guarantee must be undertaken by a Service Force Centre. Any
appliance or defective part replaced shall become the Company's property.
· This guarantee is in addition to your statutory and other legal rights.
· Home visits are made between 8.30am and 5.30pm Monday to Friday. Visits may be
available outside these hours in which case a premium will be charged.
Exclusions
This guarantee does not cover:
· Damage or calls resulting from transportation, improper use or neglect, the replacement of
any light bulbs or removable parts of glass or plastic.
· Costs incurred for calls to put right an appliance which is improperly installed or calls to
appliances outside the United Kingdom.
· Appliances found to be in use within a commercial environment, plus those which are
subject to rental agreements.
· Products of AEG-Electrolux manufacture which are not marketed by AEG-Electrolux.
European Guarantee
If you should move to another country within Europe then your guarantee moves with you
to your new home subject to the following qualifications:
· The guarantee starts from the date you first purchased your product.
· The guarantee is for the same period and to the same extent for labour and parts as exists
in the new country of use for this brand or range of products.
· This guarantee relates to you and cannot be transferred to another user.
· Your new home is within the European Community (EC) or European Free Trade Area.
· The product is installed and used in accordance with our instructions and is only used
domestically, i.e. a normal household.
· The product is installed taking into account regulations in your new country.
Before you move please contact your nearest Customer Care centre, listed below, to give
them details of your new home. They will then ensure that the local Service Organisation is
aware of your move and able to look after you and your appliances.
France
Senlis
+33 (0)3 44 62 29 29
Germany
Nürnberg
+49 (0)800 234 7378
Italy
Pordenone
+39 (0)800 117511
Sweden
Stockholm
+46 (0)8 672 53 60
UK
Luton
+44 (0) 8705 350 350
21
Installation
Electrical Connection
Any electrical work required to install this appliance should be carried
out by a qualified electrician or competent person.
WARNING – THIS APPLIANCE MUST BE EARTHED
The manufacturer declines any liability should these safety measures not
be observed.
Before switching on, make sure the electricity supply voltage is the same as
that indicated on the appliance rating plate. The rating plate is inside, on the
left.
The appliance is supplied with a 13 amp plug fitted. In the event of having
to change the fuse in the plug supplied, a 13 amp ASTA approved (BS 1362)
fuse must be used.
Important!
GREEN & YELLOW
13 AMP. FUSE
13 AMP
The wires in the mains lead are
coloured in accordance with the
following code:
Green and Yellow Earth
Blue
Neutral
Brown
Live
As the colours of the wires in the
BROWN
mains lead of this appliance may not
BLUE
CORD CLAMP
correspond with the coloured
D207
markings identifying the terminals in
your plug, proceed as follows:
The wire coloured green and yellow must be connected to the terminal
marked with the letter “E” or by the earth symbol or coloured green and
yellow.
The wire coloured blue must be connected to the terminal marked “N” or
coloured black.
The wire coloured brown must be connected to the terminal marked “L” or
coloured red.
Upon completion there must be no cut, or stray strands of wire present and
the cord clamp must be secure over the outer sheath.
Warning! A cut-off plug inserted into a 13 amp socket is a serious safety
(shock) hazard. Ensure that the cut-off plug is disposed of safely.
1.
2.
3.
4.
22
Positioning
10 mm
10 mm
100 mm
This appliance should only be installed at a location where the ambient
temperature corresponds to the climate classification indicated on the
rating plate, which is located at the left on the inside of the appliance.
The following table shows which ambient temperature is correct for each
climate classification:
SN +10°C to + 32°C
N
+16°C to + 32°C
ST +18°C to + 38°C
T
+18°C to + 43°C
For correct operation this appliance
must be located in a dry atmosphere,
away from heat sources, e.g. cookers,
radiators, boilers and direct sunlight.
You should also ensure that air can
NP00
circulate freely around the back and
the top of the cabinet. There should
be 100mm (4”) between the top of
the cabinet and any overhanging
kitchen furniture. Alternatively allow
50mm (2”) between the top of the
cabinet and any overhanging
kitchen furniture and a gap of
25mm (1”) on either side of the
appliance.
Do not obstruct the space
underneath. The back of the cabinet
D200
may be placed close to the wall but
must not touch it. DO NOT install in
places with restricted ventilation.
Adjust the level of the appliance by
screwing out the adjustable foot, or
feet, at the bottom of the cabinet
using your fingers.
Rear spacers
Fit the rear spacers contained in
the appliance to ensure escape of
heat generated during operation.
Proceed in the sequence
illustrated in figures.
23
Re-hinging the door
1.
2.
3.
4.
5.
6.
7.
8.
24
The side at which the door opens can be changed from the right side
(factory adjustment) to the left side, if the installation site requires.
Warning! When changing the side at which the door opens, the appliance
may not be connected to the mains. Remove plug from the mains
beforehand.
Procced as follows:
To carry out the following
operations, we suggest that this be
done with another person that will
keep a firm hold on the door of the
appliance during the operations.
Gently lay the appliance on its
back.
Remove the ventilation grille.
Remove the bottom hinge (A) by
unscrewing the fixing screws.
Remove the door.
Unscrew the pin of the bottom
hinge (f) and refit it on the
opposite side.
Unscrew the pin of the upper hinge
(d) and refit it on the opposite side.
Insert the door in the upper hinge
and refit the upper hinges (A).
Pay attention that the border of the
doors are parallel to the top border,
otherwise adjust the position of
the lower hinge of the door (A).
Remove from the ventilation
grille the cover (e) and refit it on
the opposite side.
Refit ventilation grille.
9.
Unscrew the top handle bracket
from the handle rod (1). Unscrew
the bottom handle bracket from
the door (2).
Unscrew the top handle
bracket from the door (3) and
screw onto the bottom righthand side of the door (4).
Turn the handle bracket with
the handle rod 180° and screw
them to the door (5) and the
fitted handle bracket (6).
Move the small plug from right
to left..
Reposition,
level
the
appliance, wait for at least
one hour and then connect it
to the mains socket.
In any case you do not want to
carry out the above mentioned
operations, contact your local
Sales Service Force. The
Service engineer will carry
out the reversibility of the
doors at your cost.
Attention:
After having reversed the opening direction of the doors check that all the
screws are properly tightened and that the magnetic seal adheres to the
cabinet. If the ambient temperature is cold (i.e. in Winter), the gasket may
not fit perfectly to the cabinet. in that case, wait for the natural fitting of
the gasket or accelerate this process by heating up the part involved with a
normal hairdryer.
25
Regulations, Standards, Guidelines
This appliance was designed for household use and was manufactured in
accordance with the appropriate standards. The necessary measures in
accordance with appliance safety legislation regulations (GSG), accident
prevention regulations for refrigeration appliances (VBG 20) and the
regulations of the German Society of Electrical Engineers (VDE) were
observed in the manufacture of this appliance.
The refrigerant circuit has been checked for leaks.
This appliance is in accordance with the following EU guidelines:
– 73/23/EWG dated 19 February 1973 - low voltage guidelines.
– 89/336/EWG dated 3 May 1989
(including guideline change notice 92/31/EWG) - EMV guideline
26
www.electrolux.com
Subject to change without notice
www.aeg-electrolux.co.uk
2223 421-54-00-17102008