M-SerieS ContraCtor guide - Duncklee Cooling & Heating

Version
I MSCG_5.12 I ©2012 Mitsubishi Electric & Electronics USA, Inc.
SERIES
M-Series Contractor guide
Table of Contents
Product Overview 4
Product Features6
Inverter Technology 6
Temperature Control 7
Programmable Comfort 8
Healthier and Cleaner Air 10
H2i® Technology
11
SINGLE-ZONE products 12
Multi-ZONE products 14
M-Series Accessories 18
M-Series PRODUCT Specifications 21
ADVANCED TECHNOLOGY CREATES
A COMFORT REVOLUTION
For more than three decades, we’ve been improving
comfort in homes all over the world. Now with the
newest innovations, any space can be transformed
with quiet, easy-to-use and energy-efficient cooling
and heating systems that deliver ultimate comfort.
Mitsubishi Electric systems feature:
•
Inverter-driven compressors
•
Split-zoning for precise temperature control and greater efficiency
•
Sleek indoor units that blend into any room
SERIES
The most advanced technology on the market:
Product overview
Perfect for Hot and
Cold SpotS and beyond
Key benefits of M-Series systems:
 Industry leading quality and reliability
 Minimal or no ductwork means less energy is wasted
 Reduced installation time over conventional systems
 Controllers allow for perfect temperatures in virtually any
space – sunrooms, bedrooms, home offices, attics,
basements and garage workshops
 Inverter-driven compressors automatically adjust cooling
and heating capacity for consistent temperature
 H2 i® Hyper-heat pumps with hot-start technology provide
instant warmth even in extreme climates (down to -130 F)
 Advanced filtration dramatically improves air quality
 Maximum energy efficiency with higher SEER and
HSPF ratings
4 / MITSUBISHI ELECTRIC / m-series / WHY M-SERIES
ENERGY EFFICIENT AND
ENVIRONMENTALLY FRIENDLY
M-Series systems utilize green technologies, and are much more efficient, so homeowners
never have to sacrifice comfort over worries about high-energy costs.
 INVERTER technology results in substantial energy and utility savings for homeowners
 Zone control for improved comfort and decreased energy usage
 Many Energy Star® rated systems
 SEER ratings as high as 26 – dramatically better than conventional systems
 Local and state utility rebates and incentive opportunities
 Environmentally friendly R410A refrigerant with zero Ozone Depletion Potential (ODP)
 83% of system components are recyclable
 Washable filters made from natural materials
Use your smart
phone to scan the
tag to the right, or
visit dsireusa.org
for information on
available local
rebate opportunities
from state or
utility companies.
MITSUBISHI ELECTRIC / m-series / Energy/environment / 5
Product Features
PUT COMFORT ON CRUISE CONTROL
Sophisticated, electronic control systems detect any change in room or zone temperature
and—like a car’s cruise control—automatically adjust the speed of the outdoor unit's
INVERTER-driven compressor for precise capacity and temperature control.
Electronic LEVs exactly control refrigerant flow to regulate coil temperature.
INVERTER TECHNOLOGY
Inverter System
Set Temperature
Automatically adjusts instantly
for consistent comfort
72°
Conventional System
Constantly fluctuates, wasting
energy and causing drafts
Time
6 / MITSUBISHI ELECTRIC / m-series / inverter
i-see Sensor™
Detects temperature
variations and controls
the airflow for ultimate
comfort
™
DETECT AND CONTROL TEMPERATURE FLUCTUATIONS
All M-Series systems detect room temperature fluctuations and automatically adjust
performance for ultimate comfort in any room.
 All indoor models feature a return air sensor that constantly monitors and maintains room temperature
 Continuous fan operation ensures temperature consistency
 Systems with an i-see SensorTM scan the room and adjust airflow based on ambient temperature readings
(MSZ-FE09/12NA i-see Sensor models only)
 Auto changeover feature automatically switches between cooling and heating modes as needed to maintain
a consistent temperature – just set it and forget it (MUZ and SUZ outdoor units)
 Seven horizontal airflow directions provide 150° of lateral airflow for greater conditioned air circulation (wide
vane or swing mode, available on the MSY(Z)-FE09/12/18/GE24/D30/36NA)
MITSUBISHI ELECTRIC / m-series / TEMPERATURE CONTROL / 7
PROGRAMMABLE COMFORT
Mitsubishi Electric offers a comprehensive family of controllers that can adjust
temperature, fan speed, and more.
Operation Select (Heat, Cool, Auto, Dry)
Fan Speed
Timer
Econo Cool
Vane Control
HR/MIN (Time Set)
Smart Set Button
Clock Set
Reset
Sliding Cover
Controller features include:
 MODE: HEAT, COOL, AUTO, and DRY
 FAN: Adjusts fan speed
 STOP/START: A 12-hour ON/OFF timer
 ECONO COOL: Energy efficient cooling option
 VANE: Sets horizontal vane position
 TIME: Power off timer and clock adjustment
Standard for M-Series wall-mounted and floor-mounted systems.
 SMART SET: Programs multiple settings into one
Optional wall-mounted wired controller is available
(PAR-21MA, requires MAC-333 adapter).
quick-press feature. Programs heating set back
Additional features available on some models
8 / MITSUBISHI ELECTRIC / m-series / Programmable
MHK1 Wireless Remote Controller Kit
Includes Wireless Wall-mounted Remote Controller, Wireless Receiver, and Cable.
Portable Central Controller and Outside Air Sensor are optional accessories.
WIRELESS Wall-Mounted
MIFH1 Wireless Receiver
REMOTE CONTROLLER
• Required for MRCH1 Wireless
Remote Controller
• Backlit, easy–to–read display
• Enabled with RedLINK reliability
• Dual set-point control with system changeover
• Enabled with RedLINK™ reliability
• Installs anywhere with simple wall-mounted design
• Compatible with MCCH1 Portable Central Controller
and MOS1 Outside Air Sensor
• Requires wireless interface (included in kit)
Portable Central
Outside Air Sensor
Controller
• Monitors outside air temperature
and humidity
• Control up to 16 RedLINK™ devices
• Displays on MHK1 Remote
Controller and MCCH1 Portable
Central Controller
• Requires MHK1 per indoor unit
• Monitor and control On/Off, Mode
and Set Temperature
• Schedule override capability
MCCH1
MOS1
• Does not interfere with other
wireless devices
• Displays outside air temperature
and humidity when used with MOS1
Outside Air Sensor
MITSUBISHI ELECTRIC / m-series / programmable / 9
MULTIPLE FILTERS FOR CLEANER, HEALTHIER AIR
Our indoor units use a sophisticated multi-part filtration system to reduce contaminants
such as allergens, viruses and bacteria from the air. This combination of filters provides a
healthier, breathing environment for the home.
1
HYBRID CATECHIN
PRE-FILTER:
• Captures dust particles and
absorbs odor-causing gases
• Hybrid-coating process makes the
catechin filter washable and, if properly
maintained with regular cleaning, remains
effective for up to ten years
2
PLATINUM CATALYST
DEODORIZING FILTER:
Available on MSZ-FE9/12NA
• Features a ceramic surface absorption
element and uses nanotechnology for
high-power odor absorption
1
• Periodic cleaning, following the
recommended procedures, will maintain
filter effectiveness for up to two years
2
3
3
BLUE-ENZYME
ANTI-ALLERGEN FILTER:
Available on MSZ-FE9/12NA
• Reduces germs, bacteria, and viruses
• Helps trap dust, pollens, mites, and
other particles
• Utilizes an enzyme catalyst to help break
down the sulfur atom bonds in allergen
proteins, transforming them into nonallergen proteins, and, effectively cleaning
the air (filter should be cleaned regularly
to maintain effectiveness)
10 / MITSUBISHI ELECTRIC / m-series / Filters
HEAT AND LOTS OF IT
Complementing the innovative INVERTER-driven compressor, the MSZ-FE
high-efficiency systems feature special technology for delivering exceptional
heating performance.
OPTION 1
h2i® Technology
MUZ–FE H2i HEATING CAPACITY
AT LOW TEMPERATURES*
% Heating Capacity
120
100%
100
73%
80
60
MUZ-FE09NA
MUZ-FE12NA
MUZ-FE18NA
Standard Heat Pump
40
20
0
-13
-4
0
5
10
17
25
30
35
Outdoor Temperature Degrees FWB
40
47
Includes correction for defrost.
*NOTE:
Low ambient temperature conditions may
require base pan heater (MSZ-GE and MSZ-FE 1:1 systems)
Heating even when
it's -13° F outdoor ambient, producing
OPTION
2
up to 100% heating capacity at 5° F (MSZ-FE09/18) and 92%
capacity at 5° F for MSZ-FE12
MUZ–FE H2i HEATING CAPACITY
Year-round
in extreme climates
AT LOWcomfort
TEMPERATURES*
% Heating Capacity
without
120
the need for energy-consuming indoor supplemental
100%
heating devices
100
73%
Hot-start technology provides warmth
80
60
from
the start, reducing drafts
40
Minimal maintenance thanks
20
MUZ-FE09NA
MUZ-FE12NA
MUZ-FE18NA
toUNITARY
easily accessible
filters, little or no ductwork to clean, and simple wiring between
0
the
indoor
and
outdoor
units
-13
-4
0
5
10
17
25
30
35
40
47
QUIETER THAN A
HUMAN WHISPER.
Do you hear that? No? Mitsubishi Electric
systems operate at low sound levels.
Our indoor units produce decibels barely
at a whisper level. Compare to other
common sounds:
Ambulance siren
Circular saw
Vacuum cleaner
Normal conversation
Whisper
Our indoor units
120 decibels
110 decibels
80 decibels
60 decibels
30 decibels
19-34 decibels*
Did you hear that? We hope you did.
Source: National Institute for Occupational Safety and Health
*Smallest to largest capacity indoor unit at low speed
Outdoor Temperature Degrees FWB
* Includes correction for defrost.
OPTION 3
MITSUBISHI ELECTRIC / m-series / H2i/QUIET / 11
SINGLE-ZONE products
M-SERIES SINGLE-ZONE PRODUCTS AND FEATURES
Total control for total comfort: single rooms can now have ultimate comfort with the
power of precise control over hot and cold spots.
SINGLE-ZONE, WALL-MOUNTED HEAT PUMPS
Cooling and Heating
Slim, wall-mounted indoor units provide zone comfort control. INVERTER-driven
compressors and electronic LEVs provide higher efficiency with controlled
power usage.The indoor unit is powered by the outdoor unit, and should a power
outage occur, the system is automatically restored when power returns.
MSZ/MUZ-GE/D Heat Pumps | 2,800–33,200 Btu/h Capacity Range
• 14.5–21 SEER, 8.2–10 HSPF, INVERTER-driven compressor
• Provides cooling and heating in a wide range of capacities
• Offers a wide vane for a wider angle of airflow, 150° from left to right
(on FE12/GE24/D30/D36 models)
• Ideal for applications in bedrooms, home offices, living rooms, dining rooms
basements, kitchens, guard houses and more
MSZ/MUZ-FE High Efficiency Heat Pumps | 3,100–25,200 Btu/h Capacity Range
• 20.2–26 SEER, 10–10.5 HSPF, INVERTER-driven compressor
• Quiet Operation as low as 22 dB(A)
• Provides cooling and heating in a wide range of capacities
• Offers a wide vane for a wider angle of airflow, 150° from left to right
• Motorized vertical vanes on FE09/12/18 models
• i-see Sensor™ technology on FE09/12 models
• Triple filtration system on FE09/12 models
• H2i® high heat capabilities at low ambient temperatures
MSZ-FE09/18 are 100% capacity at 5° FMSZ-FE12 is 92% capacity at 5° F
12 / MITSUBISHI ELECTRIC / m-series / SINGLE-ZONE
SINGLE-ZONE, CEILING-RECESSED, CASSETTE HEAT PUMPS
Cooling and Heating
SLZ-KA 2'x2' ceiling-recessed cassette units offer a wide airflow pattern for better air
distribution in a less obtrusive style. Install SLZ in a hard ceiling (with an access panel
for servicing) or in 2'x2' drop ceiling.
SLZ/SUZ Heat Pumps | 3,100–17,700 Btu/h Capacity Range
• 15–16 SEER, 9.6 HSPF, INVERTER-driven compressor
• Provides cooling and heating in a wide range of capacities
• SLZ/SUZ-KA09/1215 1:1 systems are ENERGY STAR® rated
• Ventilation air knockouts
• Built-in condensate lift mechanism (up to 20")
• Offers a 2, 3, or 4 way airflow pattern
SINGLE-ZONE, Horizontal-ducted Heat Pumps Cooling and Heating
SEZ ducted units provide comfort and efficiency while staying hidden
either in the ceiling or beneath the floor. All 1:1 systems are ENERGY
STAR® certified.
SEZ/SUZ Heat Pumps | 3,800–19,000 Btu/h Capacity Range
• 15–17.5 SEER, 10 HSPF, INVERTER-driven compressor
• Provides cooling and heating in a wide range of capacities
• Built-in condensate lift mechanism (up to 22")
• Static capability up to 0.20" WG
• Optional filter box with MERV-8 filters
Cooling Only
SINGLE-ZONE, WALL-MOUNTED Air Conditioners Cooling-only
Cooling only models operate quietly and efficiently to provide comfort in any
room.
MS/MU Air Conditioners | 9,500–12,000 Btu/h Capacity Range
• 13 SEER, non-INVERTER rotary compressor
• 9,500–12,000 Btu/h Capacity Range
• 115 volt, single phase
• Hand-held wireless remote controller only
MSY/MUY Air Conditioners | 3,800–34,600 Btu/h Capacity Range
• 15.1–21 SEER, INVERTER compressor
• Offers a wide vane for a wider angle of airflow, 150° from left to right
• Motorized vertical vanes on GE24/D30/D36 models
• Multiple ENERGY STAR® models available
M-Series systems are not suitable for critical room and low ambient cooling applications.
Use commercial grade P-Series with full cooling capacity down to 0o F with wind baffle.
MITSUBISHI ELECTRIC / m-series / SINGLE-ZONE / 13
MULTI-zone Products
M-SERIES MULTI-ZONE PRODUCTS AND FEATURES
Total zone control: individually controlled rooms (up to 8) with a single outdoor system
With the MXZ-B multi-zone system your customers can enjoy ideal levels of comfort in the rooms you use most
while reducing their energy costs. Each zone operates independently. People in different rooms—like the kitchen,
master bedroom or living room—can set temperatures for personalized comfort.
The Multi-Zone system features include:
• Mix and match flexibility of indoor unit styles and combinations
• A wide range of indoor unit capacities that match the room size and
requirements
• Flexible options to tackle the most challenging multi-room installations
• High efficiency, multiple ENERGY STAR® combinations
• Simple, quick, and cost-effective installation
MXZ-8B48
• Four-ton outdoor unit can support up to eight indoor units using
MXZ-2B20
•
MXZ-3B24
•
MXZ-3B30
•
MXZ-4B36
•
branch boxes
Advanced microprocessor control
Auto restart following a power outage
Self-check function offering integrated diagnostics
Wired and wireless control options
WALL-MOUNTED INDOOR UNITS FOR MULTI-ZONE SYSTEMS Cooling and Heating
Slim, wall-mounted indoor units provide zone comfort control. INVERTER-driven
compressors and electronic LEVs provide higher efficiency with controlled power
usage. The A-control feature powers the indoor unit from the outdoor unit, and
should a power outage occur, the system is automatically restored when power
returns.
MSZ-GE Heat Pumps | 06, 09, 12, 15, 18, 24
• INVERTER-driven compressor
• Provides cooling and heating in a wide range of capacities
• Offers a wide vane for a wider angle of airflow, 150° from left to right
(on FE12/GE24/D30/D36 models)
MSZ-FE High Efficiency Heat Pumps | 09, 12, 18
• Quiet operation as low as 22 dB(A)
• Offers a wide vane for a wider angle of airflow, 150° from left to right
• Motorized horizontal vanes on FE09/12/18 models
• i-see Sensor™ technology on FE09/12 models
• Triple filtration system on FE09/12 models
14 / MITSUBISHI ELECTRIC / m-series / MULTI-ZONE
CEILING-RECESSED INDOOR UNITS FOR MULTI-ZONE SYSTEMS Cooling and Heating
SLZ-KA 2'x2' ceiling-recessed cassette units offer a wide airflow pattern for better air
distribution in a less obtrusive style. Install SLZ in a hard ceiling (with an access panel for
servicing) or in 2'x2' drop ceiling.
SLZ Heat Pumps | 09, 12, 15
• INVERTER-driven compressor
• Ventilation air knockouts
• Built-in condensate lift mechanism (up to 20")
• Offers a 2, 3, or 4 way airflow pattern
Horizontal-ducted Heat Pumps FOR MULTI-ZONE SYSTEMS Cooling and Heating
SEZ ducted units provide comfort and efficiency while staying hidden either in the
ceiling or beneath the floor.
SEZ Heat Pumps | 09, 12, 15, 18
• INVERTER-driven compressor
• Built-in condensate lift mechanism (up to 22")
• Static capability up to 0.20" WG
• Optional filter box with MERV-8 filters
FLOOR-mounted INDOOR UNITS FOR MULTI-ZONE SYSTEMS Cooling and Heating
Floor-mounted indoor unit mounts on the floor or up to 5" above floor and has front panel
access to the filter for ease of cleaning. It is perfect for difficult areas that may be smaller or
don’t have usable space on the walls.
MFZ Heat Pumps | 09, 12, 18
• Top and bottom discharge vanes
• Hot-start technology
• Quiet operation
• Wireless remote control with smart set feature
Note: Select PLA, PCA, PEAD models are also compatible with select multi-zone MXZ-B systems
MITSUBISHI ELECTRIC / m-series / MULTI-ZONE / 15
MULTI-ZONE SYSTEM EXAMPLE
MSZ Indoor Unit
SEZ Indoor Unit
MUZ Outdoor Unit
MXZ-B Outdoor Unit
For a complete list of the
MXZ-B Series approved
combinations, scan the tag.
www.mitsubishipro.com/
multizone
16 / MITSUBISHI ELECTRIC / m-series / MULTI-ZONE
Combination Possibilities
MXZ-2B20NA-1 (2:1)
Outdoor Unit
MXZ-3B24/30NA-1 (2:1, 3:1)
Outdoor Unit
SEZ-KD12NA
Indoor Unit
Two MSZ-GE09NA Indoor Units
(Two indoor units must be installed.)
MSZ-GE09NA and MFZ-KD09NA Indoor Units
(Two indoor units must be installed.)
MXZ-4B36NA-1 (2:1, 4:1) Outdoor Unit
MFZ-KD09NA
Indoor Unit
Two MSZ-GE09NA Indoor Units
SEZ-KD12NA
Indoor Unit
(Two indoor units must be installed.)
MXZ-8B48NA-1 (2:1, 8:1) Outdoor Unit*
Branch Box
(Minimum of
one required
with MXZ-8B)
SEZ-KD15 Indoor Unit
Two MSZ-GE06NA
Indoor Units
SEZ-KD09NA Indoor Unit
(Two indoor units must be installed.)
MFZ-KA12NA Indoor Unit
*Illustration purposes only.
MITSUBISHI ELECTRIC / m-series / MULTI-ZONE / 17
M-SERIES ACCESSORIES
MHK1 Wireless Remote Controller Kit
The flagship remote controller kit for M-Series systems, MHK1 features RedLINK™
wireless technology, easy-to-use temperature controls and a bright, backlit display.
Optional Accessories
TM
MCCH1
Function
MOS1
Description
ON/OFF
On/Off operation for a single indoor unit
Operation Mode
Cool / Drying / Auto / Heat / Fan operation modes dependent on connected system
Temperature Setting
Set temperature from 40° F - 99° F depending on operation mode and connected system
System Changeover Deadband Value
2° F - 8° F
Schedule Operation
5-2, 5-1-1
Optimal Start
Eliminates the guesswork when setting your schedule. Allows the remote controller to
“learn" how long your split-zoning system takes to reach programmed temperature
setting, so the temperature is reached at the time you set
Fan Speed Setting
Hi/Mid-2/Mid-1/Low/Auto Available fan speed settings dependent on connected system
Airflow Direction Setting
Airflow angles: 100° - 80° - 60° - 40° and oscillate available airflow direction settings
dependent on connected system
Permit/Prohibit Function
Individual prohibit operations for each remote controller function (ON/OFF, Set
Temperature and Operation Mode)
Space Temperature
Displays the measured space temperature
Error Indication
Displays error code
Display Outside Temperature and Humidity
Requires optional MOS1 Outside Air Sensor
Dimensions - (W x D x H)
Remote Controller: 5-3/16" x 1-1/2" x 3-9/16" Receiver: 3-1/4" x 1-5/16" x 6-7/16"
Operating Ambient Temperature
Remote Controller: 32° F - 120° F Receiver: -40° F – 165° F
Operating Ambient Humidity
Remote Controller: 5% - 90% RH (non-condensing) Receiver: 5% - 90% RH
(non-condensing)
Power Supply
2 AA batteries (included)
Note: MHK1 Compatible with current INVERTER-driven M-Series as noted in data charts.
18 / MITSUBISHI ELECTRIC / m-series / accessories
Specifications are subject to change without notice
Ball Valves
DIAMONDBACK BV-SERIES BALL VALVES
Diamondback BV-Series ball valves include the following features:
Model Numbers:
BV14FFSI
BV14FFSI
BV14FFSI
BV14FFSI
•
•
•
•
Engineered for mini-split and multi-split units
Full port design with flare connections
700 PSIG rated
Flare connections
Other important information:
•
•
•
•
Size available: 1/4", 3/8", 1/2", 5/8"
Fully factory assembled
Furnace brazed and pressure tested
Each ball valve is equipped with Schrader® Valve for refrigerant service
•
•
•
•
•
Temperature range: -40° F to +325° F (-40° C to +149° C)
Forged brass body and seal cap
Polytetrafluoroethylene (PTFE) seals and gaskets (no synthetic O-rings)
Seal cap design permits valve operation without removal of seal cap
One-year limited materials and workmanship warranty on ball valves
Part Number
SAE Flare
A
B
C
D
E
F
BV14FFSI
1/4"
6.19
2.60
1.80
1.22
1.42
1.10
BV38FFSI
3/8"
6.30
2.67
1.80
1.22
1.42
1.10
BV12FFSI
1/2"
6.51
2.67
1.80
1.22
1.42
1.10
BV58FFSI
5/8"
6.64
2.67
1.80
1.28
1.42
1.10
Platform Stands
DIAMONDBACK PLATFORM STANDS
Lift the outdoor unit to new heights.
•
•
•
•
Easy to install
Available for all system sizes
Color matched to the outdoor units
One-year warranty
Model DSD-400N
L: 15 3/4"
W: 3 1/4"
H: 3 1/4"
MITSUBISHI ELECTRIC / m-series / accessories / 19
Linesets
DIAMONDBACK LINESETS
Diamondback linesets include the following
features:
• Quick, efficient, and economical field
•
•
Caps On
•
•
installation using factory applied Twin-Tube
insulation and flare connections with flare
nuts mounted
Correct lengths for reducing waste and time
Quality, consistency, and economy
All Diamondback lineset tubing is tested in
accordance with ASTM E243
One year warranty
Lineset
Part Number
Tube
Size (IN.)
Length
Insul.
MLS143812T-15
1/4 x 3/8
15
1/2"
MLS143812T-30
1/4 x 3/8
30
MLS143812T-50
1/4 x 3/8
MLS143812T-65
“TWIN-TUBE” LINESET
INSULATION DESIGN
• Balanced outside diameter
for uniform coil/uncoil
position stability.
• Minimum 1/2” insulation
thickness on both tubes
Tube
Size (IN.)
Length
Insul.
MLS145812T-30
1/4 x 5/8
30
1/2"
1/2"
MLS145812T-50
1/4 x 5/8
50
1/2"
50
1/2"
MLS145812T-65
1/4 x 5/8
65
1/2"
1/4 x 3/8
65
1/2"
MLS145812T-100
1/4 x 5/8
100
1/2"
MLS141212T-15
1/4 x 1/2
15
1/2"
MPLS385812T-10 3/8 x 5/8
10
1/2"
MLS141212T-30
1/4 x 1/2
30
1/2"
MPLS385812T-15 3/8 x 5/8
15
1/2"
MLS141212T-50
1/4 x 1/2
50
1/2"
MPLS385812T-30 3/8 x 5/8
30
1/2"
MLS141212T-65
1/4 x 1/2
65
1/2"
MPLS385812T-50 3/8 x 5/8
50
1/2"
MLS141212T-100
1/4 x 1/2
100
1/2"
MPLS385812T-65 3/8 x 5/8
65
1/2"
MLS145812T-15
1/4 x 5/8
15
1/2"
MPLS385812T-100
3/8 x 5/8
100
1/2"
(FT.)
Lineset
Part Number
(FT.)
Filter Boxes
FILTER BOXES
FB Series filter boxes are available in compatible sizes for all M-Series horizontal ducted
indoor units. FBL1 filter boxes include 1" thick pleated MERV 8 filter(s) installed. Filters
are tested in accordance with ANSI/ASHRAE Standard 52.2 and Rated Class 2 under
U.L. Standard 900.
The cabinet is constructed of non-insulated 20 gauge, G-60 galvanized steel with a
foam gasket and provides an air-tight connection to the indoor unit and access door.
Gasket material complies with UL 723 requirements. In addition, a screw-through
cabinet design for secure attachment to indoor unit and return connection in rear is
easily field-converted to bottom return.
Part Number
Part Description
FBL1-1
FB Series Filter Box for SEZ-KD09NA4
FBL1-2
FB Series Filter Box for SEZ-KD12/15NA4
FBL1-3
FB Series Filter Box for SEZ-KD18NA4
FBM2-3
FB Series Filter for PEAD-A24AA4/30AA4
20 / MITSUBISHI ELECTRIC / m-series / accessories
M-SERIES PRODUCT SPECIFICATIONS
MITSUBISHI ELECTRIC / m-series / 21
MITSUBISHI ELECTRIC / m-series / specifications / 21
Single Zone I MS Cooling-Only
Model Name
Cooling *1
Power Supply
Voltage
MS-A09WA
MS-A12WA
Outdoor Unit
MU-A09WA
MU-A12WA
12,000
Rated Capacity
Btu/h
9,500
Capacity Range
Btu/h
-
-
Total Input
W
870
1,070
Energy Efficiency
SEER
Moisture Removal
Sensible Heat Factor
Phase, Cycle, Voltage
Indoor - Outdoor L1-N
Indoor - Outdoor N-2
Indoor - Remote Controller
MCA
Fan Motor
Pints/h
Airflow (Lo-Med-Hi-Powerful)
Indoor Unit
Non-inverter
Indoor Unit
Sound Pressure Level
(Lo-Med-Hi-Powerful)
External Finish Color
13
2.7
0.68
3.2
0.70
1 Phase, 60Hz, 115V *2
AC 115V
AC 115V
Wireless Type
1.2
0.95
A
F.L.A.
DRY (CFM)
183-261-335-367
222-286-406-446
WET (CFM)
162-233-300-328
198-254-363-399
26-32-40-42
33-38-45-47
dB(A)
Munsell No. 1.0Y 9.2/0.2
W: In.
Dimension Unit
Remote Controller
30-11/16
D: In.
8-1/4
H: In.
11-3/4
Weight Unit
Lbs.
23
Field Drainpipe Size O.D.
In.
5/8
Type
Hand-held Wireless Remote Controller
MCA
A
14
16
MOCP
(Time Delay) A
15
20
Fan Motor
F.L.A.
0.63
Model (Type)
Compressor
Outdoor Unit
Airflow
R.L.A.
9.3
L.R.A.
47
56
CFM
1,083
1,327
dB(A)
47
W: In.
31-1/2
D: In.
11-1/4
11-7/16
H: In.
21-5/8
23-13/16
Lbs.
78
Refrigerant Control
Sound Pressure Level
(Cooling) *1
Weight
Refrigerant
Lbs., Oz.
Oil
Type (Fl. Oz.)
Gas Side O.D.
Refrigerant Pipe
Connection Method
Height Difference (Max.)
52
Munsell No. 3Y 7.8/1.1
Type
Charge
Liquid Side O.D.
10.82
Capillary Tube
External Finish Color
Dimensions
0.93
Single Rotary
33-7/16
96
R410A
In.
2, 5
3, 1
NE022 (10.8)
3/8
Ft..
1/2
1/4
35
Length (Max.)
65
Indoor/Outdoor
Flared/Flared
NOTES: Test conditions are based on AHRI 210/240.
*1. Rating conditions (cooling) - Indoor D.B. 80º F (27º C), W.B. 67º F (19º C); Outdoor: D.B. 95º F (35º C), W.B.
75º F (24º C).
*2. Indoor units receive power from outdoor units through field-supplied interconnected wiring.
Specifications are subject to change without notice.
LIMITED WARRANTY I Seven-year warranty on compressor. Five-year warranty on parts.
22 / MITSUBISHI ELECTRIC / m-series / specifications
Single Zone I MSY Cooling-Only
Indoor Unit
Model Name
Cooling *1
Power Supply
Voltage
Outdoor Unit
MUY-GE09NA
MSY-GE24NA
MSY-D30NA-8
MSY-D36NA-8
MUY-GE12NA MUY-GE15NA-1 MUY-GE18NA-1 MUY-GE24NA
MUY-D30NA-1
MUY-D36NA-1
Rated Capacity
Btu/h
9,000
12,000
14,000
17,200
22,500
30,700
34,600
Capacity Range
Btu/h
3,800-12,200
3,800-13,600
3,100-18,200
3,700-18,700
8,200-31,400
9,800-30,700
9,800-34,600
Total Input
Energy Efficiency
Moisture Removal
Sensible Heat Factor
Phase, Cycle, Voltage
Indoor - Outdoor S1 - S2
Indoor - Outdoor S2 - S3
Indoor - Remote Controller
MCA
Fan Motor
Airflow at Cooling (Quiet-Lo-Med-HiSuper Hi or Lo-Med-Hi-Powerful)*1
Indoor Unit
MSY-GE09NA-8 MSY-GE12NA-8 MSY-GE15NA-8 MSY-GE18NA-8
Sound Pressure Level at Cooling
(Quiet-Lo-Med-Hi-Super Hi or
Lo-Med-Hi-Powerful) *1
W
660 (205-1,200)
960 (205-1,300)
SEER
21
20.5
21
Pints/h
1.5
0.82
2.5
0.74
2.7
0.80
A
F.L.A.
DRY
(CFM)
WET
(CFM)
dB(A)
1,080 (160-2,000) 1,640 (240-2,070) 1,800 (570-3,580) 3,380 (620-3,380) 4,240 (620-4,240)
109-134-201-286-364
19-22-30-37-45
26-32-38-44-49
External Finish Color
Dimension Unit
Weight Unit
Field Drainpipe Size O.D.
Remote
Controller
Compressor
Outdoor Unit
Airflow (Cooling)
Refrigerant Control
Sound Pressure Level at Cooling *1
Refrigerant
Weight
Type
Charge
Oil
Refrigerant Pipe
Refrigerant Pipe
Length
Connection
Method
Gas Side O.D.
Liquid Side O.D.
15.1
11.9
0.62
389-639-848-887
350-576-763-798
34-41-49-53
32-42-49-51
Munsell No. 1.0Y 9.2 / 0.2
31-7/16
43-5/16
46-1/16
D: In.
H: In.
Lbs.
In.
9-1/8
11-5/8
22
9-3/8
12-13/16
37
11-5/8
14-3/8
40
5/8
Hand-held Wireless Remote Controller (Optional MHK1 Backlit Wireless Wall-mounted Remote Controller)
A
A
F.L.A.
Model
(Type)
R.L.A.
L.R.A.
CFM
12
1,151
dB(A)
46
14
17.1
20
15
21
25
0.50
0.93
DC INVERTER-driven
DC INVERTER-driven Twin Rotary
4.9
6.1
6.8
8.5
1,243
1,229
10.0
12.5
1,730
Linear Expansion Valve
49
12.9
16.1
1,769
16
20
1,941
54
External Finish Color
Dimensions
28-33-38-44-49
16
9.9
0.64
W: In.
Type
MCA
MOCP
Fan Motor
19
4.6
5.1
0.71
0.75
1-phase, 60Hz, 208 / 230V *2
AC 208 / 230V
DC12-24V
Wireless Type (Optional Wired Controller: DC 12V)
1.0
0.76
205-272-335230-275-339388-469-628-738
420-533
420-533
170-237-300194-240-304347-420-562-661
385-498
385-498
145-170-237-321-399
19-22-30-37-43
19.2
55
56
Munsell No. 3Y 7.8 / 1.1
W: In.
D: In.
31-1/2
11-1/4
13
13
13
H: In.
21-5/8
33-7/16
34-5/8
33-7/16
Lbs.
Lbs., Oz.
Type (fl.
oz.)
In.
In.
66
33-1/16
77
1, 12
80
119
R410A
3, 7
2, 9
NEO22 (10.8)
NEO22 (15.2)
3/8
1/4
1/2
1/4
126
4, 3
4
FV50S (13.52)
NE022 (29.4)
5/8
3/8
Height Difference (Max.)
Ft..
40
50
Length (Max.)
Ft..
65
100
Indoor/Outdoor
Flared/Flared
NOTES: Test conditions are based on AHRI 210/240.
*1. Rating conditions (cooling) - Indoor D.B. 80º F (27º C), W.B. 67º F (19º C); Outdoor: D.B. 95º F (35º C), W.B. 75º F (24º C).
*2. Indoor units receive power from outdoor units through field-supplied interconnected wiring.
Specifications are subject to change without notice.
LIMITED WARRANTY I Seven-year warranty on compressor. Five-year warranty on parts.
MITSUBISHI ELECTRIC / m-series / specifications / 23
Single Zone I MSZ Heat Pump
Model Name
Cooling *1
Indoor Unit
MSZ-FE09NA-8
MSZ-FE12NA-8
MSZ-FE18NA
MSZ-GE09NA-8
MSZ-GE12NA-8
Outdoor Unit
MUZ-FE09NA-1
MUZ-FE12NA1
MUZ-FE18NA
MUZ-GE09NA
MUZ-GE12NA
Rated Capacity
Btu/h
9,000
12,000
18,000
9,000
12,000
Capacity Range
Btu/h
2,800-9,000
2,800-12,000
8,200-25,200
3,800-12,200
3,800-13,600
Total Input
W
580 (160-650)
930 (160-960)
1,270 (570-2,280)
660 (205-1,200)
960 (205-1,300)
Energy Efficiency
SEER
26
23
20.2
21
20.5
Moisture Removal
Sensible Heat Factor
Pints/h
2.1
0.76
2.9
0.73
2.7
0.84
1.5
0.82
2.5
0.74
Rated Capacity
Btu/h
21,600
10,900
Capacity Range
Heating at 47° F *2
Total Input
HSPF (IV)
Rated Capacity
Heating at 17° F *3 Rated Total Input
Maximum Capacity
Heating at 5° F
Maximum Capacity
Power Supply
Phase, Cycle, Voltage
Indoor - Outdoor S1 - S2
Voltage
Indoor - Outdoor S2 - S3
Indoor - Remote Controller
MCA
Fan Motor
Airflow at Cooling (Lo-Med-Hi-Super
HI-Powerful) *1
Airflow at Heating (Lo-Med-Hi-Super
HI-Powerful) *2
Sound Pressure Level at Cooling (LoMed-Hi-Super HI-Powerful) *1
Sound Pressure Level at Heating (LoMed-Hi-Super HI-Powerful) *2
Indoor Unit
10,900
13,600
3,000-18,000
710 (150-2,250)
10
6,700
650
12,500
10,900
3,000-21,000
950 (150-2,250)
10.5
7,900
750
13,600
12,500
DRY (CFM)
162-226-339-381
162-226-381-410
388-469-628-738
145-170-237-321-399
145-170-237-321-399
WET (CFM)
144-202-307-343
144-202-350-367
347-420-562-661
109-134-201-286-364
109-134-201-286-364
WET (CFM)
166-240-367-381
166-240-399-420
388-469-628-738
145-170-237-321-406
145-170-237-321-406
dB(A)
22-31-39-42
22-33-43-45
34-41-49-53
19-22-30-37-43
19-22-30-37-45
dB(A)
22-31-40-42
22-33-43-44
32-41-49-52
19-22-30-37-43
19-22-30-37-43
Btu/h
W
Btu/h/W
Btu/h
W
Btu/h
Btu/h
A
F.L.A.
External Finish Color
Dimension Unit
Weight Unit
Field Drainpipe Size O.D.
Remote
Controller
Munsell No. 1.0Y 9.2 / 0.2
43-5/16
31-7/16
D: In.
H: In.
Lbs.
In.
10-1/8
11-5/8
27
9-3/8
12-13/16
37
5/8
9-1/8
11-5/8
22
Hand-held Wireless Remote Controller (Optional MHK1 Backlit Wireless Wall-mounted Remote Controller)
12
12
17.1
A
MOCP
A
15
20
15
Fan Motor
F.L.A.
0.56
0.93
0.50
Airflow (Cooling/Heating)
Model
(Type)
R.L.A.
L.R.A.
CFM
DC INVERTER-driven Twin Rotary
8.6
10.8
1,102 / 1,187
DC INVERTER-driven
12.9
16.1
1,769 / 1,701
6.6
8.2
1,151 / 1,225
1,229 / 1,172
Linear Expansion Valve
Defrost Method
Refrigerant Pipe
Length
8,800
900
11,200
9,194
31-3/8
Refrigerant Control
Refrigerant Pipe
10
MCA
Compressor
Refrigerant
5,500-18,100
1,170 (340-1,660)
W: In.
Type
Outdoor Unit
14,400
7,500-29,700
4,500-14,100
1,540 (520-2,240)
760 (255-1,200)
10.3
11,700
6,600
1,240
700
21,600
8,700
21,600
7,061
1 Phase, 60Hz, 208/230V *4
AC 208 / 230V
DC12-24
Wireless Type (Optional Wired Controller: DC12V)
1.0
0.76
Reverse Cycle
Sound Pressure Level at Cooling *1
dB(A)
48
55
46
49
Sound Pressure Level at Heating *2
External Finish Color
dB(A)
49
55
Munsell No. 3Y 7.8 / 1.1
50
51
W: In.
31-1/2
33-1/16
31-1/2
Dimensions
D: In.
H: In.
11-1/4
21-5/8
13
34-5/8
11-1/4
21-5/8
Weight
Lbs.
80
119
66
1, 12
Type
Charge
Lbs., Oz.
Oil
Type (fl. oz.)
Gas Side O.D.
Liquid Side O.D.
Height Difference (Max.)
Length (Max.)
Connection Method Indoor/Outdoor
77
2, 9
R410A
4, 3
NE022 (15.2)
FV50S (13.5)
NE022 (10.8)
In.
In.
3/8
1/4
5/8
3/8
3/8
1/4
Ft.
40
50
40
Ft.
65
100
Flared/Flared
65
NOTES: Test conditions are based on AHRI 210/240.
*1. Rating conditions (cooling)-Indoor: D.B. 80º F (27º C), W.B. 67º F (19º C);
Outdoor: D.B. 95º F (35º C), W.B. 75º F (24º C).
*2. Rating conditions (heating)-Indoor: D.B. 70º F (21º C), W.B. 60º F (16º C);
Outdoor: D.B. 47º F (8º C), W.B. 43º F (6º C).
2, 9
*3. Rating conditions (heating)-Indoor: D.B. 70º F (21º C), W.B. 60º F (16º C);
Outdoor: D.B. 17º F (-8º C), W.B. 15º F (-9º C).
*4. Indoor units receive power from outdoor units through field-supplied interconnected wiring.
Specifications are subject to change without notice.
LIMITED WARRANTY I Seven-year warranty on compressor. Five-year warranty on parts.
24 / MITSUBISHI ELECTRIC / m-series / specifications
Single Zone I MSZ Heat Pump
Model Name
Cooling *1
Indoor Unit
MSZ-GE15NA-8
MSZ-GE18NA-8
MSZ-GE24NA
MSZ-D30NA-8
MSZ-D36NA -8
Outdoor Unit
MUZ-GE15NA-1
MUZ-GE18NA-1
MUZ-GE24NA
MUZ-D30NA-1
MUZ-D36NA-1
Rated Capacity
Btu/h
14,000
17,200
22,500
30,700
33,200
Capacity Range
Btu/h
3,100-18,200
3,700-18,700
8,200-31,400
9,800-30,700
9,800-33,200
1,080 (160-2,000)
1,640 (240-2,070)
1,800 (570- 3,580)
3,850 (620-3,850)
21
19.2
19.0
Total Input
W
Energy Efficiency
SEER
Moisture Removal
Pints/h
Sensible Heat Factor
Heating
at 47º F *2
Heating
at 17º F *3
(c on t.)
Rated Capacity
Btu/h
Capacity Range
Btu/h
Total Input
W
HSPF (Region IV)
Btu/h/W
Rated Capacity
4,360 (620-4,360)
14.5
2.7
4.6
5.1
9.9
0.80
0.71
0.75
0.64
11.3
0.62
18,000
21,600
27,600
32,600
35,200
4,800-20,900
3,500-25,200
7,500-36,900
8,700-34,000
8,700-36,000
1,600 (270-2,010)
1,900 (230-2,680)
2,340 (520- 3,650)
3,360 (520-3,600)
3,840 (520-4,100)
Btu/h
11,300
13,400
16,000
19,500
21,800
Rated Total Input
W
1,150
1,450
1,770
2,620 *5
3,000 *5
8.2
10
Maximum Capacity
Btu/h
15,900
17,200
24,600
20,800
22,800
Heating at 5º F
Maximum Capacity
Btu/h
13,022
13,562
21,160
16,305
19,090
Power Supply
Phase, Cycle, Voltage
Indoor - Outdoor S1-S2
Indoor - Outdoor S2-S3
Indoor - Remote Controller
MCA
Fan Motor
Voltage
Airflow at Cooling (Lo-Med-HiSuper HI-Powerful) *1
Indoor Unit
Airflow at Heating (Lo-Med-HiSuperHI-Powerful) *2
Sound Pressure Level (Cooling)
(Lo-Med-Hi-Super HI-Powerful) *1
Sound Pressure Level (Heating)
(Lo-Med-Hi-Super HI-Powerful) *2
External Finish Color
Dimension Unit
1 Phase, 60Hz, 208/230V *4
AC 208 / 230V
DC12-24
Wireless Type (Optional Wired Controller: DC12V)
1.0
0.76
A
F.L.A.
DRY (CFM)
205-272-335-420-533 230-275-339-420-533
388-469-628-738
389-639-848-887
WET (CFM)
170-237-300-385-498 194-240-304-385-498
347-420-562-661
350-576-763-798
DRY (CFM)
205-247-304-367-463 230-275-339-431-512
388-469-628-738
445-639-848-887
34-41-49-53
32-42-49-51
32-41-49-52
34-42-49-50
26-32-38-44-49
28-33-38-44-49
26-30-35-40-46
28-33-38-44-49
dB(A)
Munsell No. 1.0Y 9.2/0.2
W: In.
31-7/16
31-7/16
43-5/16
46-1/16
D: In.
9-1/8
9-1/8
9-3/8
11-5/8
11-5/8
12-13/16
14-3/8
H: In.
Weight Unit
Field Drainpipe Size O.D.
Remote Controller Type
MCA
MOCP
Fan Motor
Lbs.
In.
22
37
40
5/8
Hand-held Wireless Remote Controller (Optional MHK1 Backlit Wireless Wall-mounted Remote Controller)
A
A
F.L.A.
12
14
0.93
Outdoor Unit
Dimensions
Weight
DC INVERTER-driven Twin Rotary
R.L.A.
7.4
10.0
12.9
L.R.A.
9.3
1,243 / 1,229
12.5
16.1
1,730 / 1,659
49
51
54
56
Airflow
CFM
Refrigerant Control
Defrost Method
Sound Pressure Level at Cooling *1 dB(A)
Sound Pressure Level at Heating *2 dB(A)
External Finish Color
W: In.
31-1/2
D: In.
11-1/4
H: In.
21-5/8
Lbs.
80
Lbs., Oz.
Oil
Type (Fl. Oz.)
Refrigerant Pipe
Liquid Side O.D.
Height Difference (Max.)
Length (Max.)
Connection
Method
20
1,769 / 1,701
Linear Expansion Valve
Reverse Cycle
55
55
Munsell No. 3Y 7.8/1.1
1,941
57
56
13
33-7/16
33-7/16
119
141
R410A
Charge
Gas Side O.D.
16
33-1/16
Type
Refrigerant
21
25
0.50
Model (Type)
Compressor
17.1
20
15
NE022 (15.2)
4, 3
4, 10
FV50S (13.5)
NE022 (29.4)
5/8
1/2
1/4
In.
Ft.
3, 7
2, 9
3/8
50
40
100
65
Indoor/Outdoor
NOTES: Test conditions are based on AHRI 210/240.
*1. Rating conditions (cooling)-Indoor: D.B. 80º F (27º C), W.B. 67º F (19º C); Outdoor: D.B.
95º F (35º C), W.B. 75º F (24º C).
*2. Rating conditions (heating)-Indoor: D.B. 70º F (21º C), W.B. 60º F (16º C); Outdoor: D.B.
47º F (8º C), W.B. 43º F (6º C).
Flared/Flared
*3. Rating conditions (heating)-Indoor: D.B. 70º F (21º C), W.B. 60º F (16º C); Outdoor: D.B.
17º F (-8º C), W.B. 15º F (-9º C).
*4. Indoor units receive power from outdoor units through field-supplied interconnected wiring.
*5. Maximum Total Input
Specifications are subject to change without notice.
LIMITED WARRANTY I Seven-year warranty on compressor. Five-year warranty on parts.
MITSUBISHI ELECTRIC / m-series / specifications / 25
Single Zone I SEZ Heat Pump
Indoor Unit
Outdoor Unit
Model Name
Cooling *1
Heating at 47° F *2
Heating at 17° F *3
Power Supply
Voltage
8,100
11,500
14,100
17,200
Btu/h
3,800-10,900
3,800-13,300
3,800-17,000
3,800-19,000
Total Input
W
670
920
1,170
1,380
Energy Efficiency
Moisture Removal
Sensible Heat Factor
SEER
Pints/h
15
1.5
0.80
16
2.4
0.76
15.5
2.6
0.80
17.5
3.4
0.79
Rated Capacity
Btu/h
Capacity Range
Total Input
HSPF (IV)
Rated Capacity
Rated Total Input
Maximum Capacity
Phase, Cycle, Voltage
Indoor - Outdoor S1 - S2
Indoor - Outdoor S2 - S3
MCA
Fan Motor
Btu/h
W
Btu/h/W
Btu/h
W
Btu/h
A
F.L.A.
Weight Unit
Drain-lift Mechanism
Field Drainpipe Size O.D.
Type
MCA
MOCP
Fan Motor
Compressor
Airflow (Cooling/Heating)
Dimensions
Refrigerant Pipe
Length
13,600
18,000
21,600
4,800-16,400
1,140
4,800-21,100
1,500
4,800-24,900
1,700
10.0
9,000
11,900
920
1,200
9,000
11,900
1 Phase, 60Hz, 208 / 230V *4
AC 208-230V
DC 12-24V
1
0.57
6,700
810
6,700
0.51
13,100
1,350
13,100
0.74
194-247-317
247-317-388
353-441-529
423-529-635
WET (CFM)
In. W.G.
dB(A)
174-222-285
222-285-349
317-396-476
0.02-0.06-0.14-0.20
23-28-33
30-34-37
Galvanized-Steel Sheets
381-476-572
39
46-7/8
D: In.
H: In.
Lbs.
H: In.
In.
A
A
F.L.A.
Model
(Type)
R.L.A.
L.R.A.
CFM
23-26-30
31-1/8
30-34-38
27-9/16
7-7/8
42
50
54
62
21-11/16
1-1/4
Select from MHK1 (Preferred), PAR-21MA, or PAR-FL/FA32 Remote Controllers
12
14
15
0.50
0.93
DC Inverter
DC Inverter Twin Rotary
6.6
8.2
1,151/1,225
7.4
9.3
1,243/1,229
1,229/1,172
Refrigerant Control
Defrost Method
Sound Pressure Level at Cooling *1
Sound Pressure Level at Heating *2
External Finish Color
Refrigerant Pipe
10,900
4,800-14,100
1,020
DRY (CFM)
W: In.
Refrigerant
SEZ-KD18NA4
SUZ-KA18NA
Btu/h
Dimension Unit
Outdoor Unit
SEZ-KD15NA4
SUZ-KA15NA
Capacity Range
External Static Pressure *3
Sound Pressure Level (Lo-Med-Hi)
External Finish
Remote Controller
SEZ-KD12NA4
SUZ-KA12NA
Rated Capacity
Airflow at Cooling/Heating (Lo-Med-Hi)
Indoor Unit
SEZ-KD09NA4
SUZ-KA09NA
10
12.5
1,730/1,659
Linear Expansion Valve
W: In.
Reverse Cycle
49
51
Munsell No. 3Y 7.8/1.1
31-1/2
D: In.
11-1/4
13
H: In.
Lbs.
21-5/8
77
33-7/16
119
dB(A)
dB(A)
46
50
33-1/6
Weight
Type
Charge
Oil
Gas Side O.D.
Liquid Side O.D.
Lbs., Oz.
Type (fl. oz.)
In.
In.
Height Difference (Max.)
Ft.
40
50
Ft.
65
100
Length (Max.)
Connection Method Indoor/Outdoor
NOTES: Test conditions are based on AHRI 210/240.
*1. Rating conditions (cooling)-Indoor: D.B. 80º F (27º C), W.B. 67º F (19º C); Outdoor: D.B.
95º F (35º C), W.B. 75º F (24º C).
*2. Rating conditions (heating)-Indoor: D.B. 70º F (21º C), W.B. 60º F (16º C); Outdoor: D.B.
47º F (8º C), W.B. 43º F (6º C).
*3. Rating conditions (heating)-Indoor: D.B. 70º F (21º C), W.B. 60º F (16º C); Outdoor: D.B.
17º F (-8º C), W.B. 15º F (-9º C).
26 / MITSUBISHI ELECTRIC / m-series / specifications
66
54
56
80
R410A
2, 9
2
NEO22 (10.8)
3/8
4
NEO22 (15.2)
1/2
1/4
Flared/Flared
*4. Indoor units receive power from outdoor units through field-supplied interconnected wiring.
Specifications are subject to change without notice.
LIMITED WARRANTY I Seven-year warranty on compressor. Five-year warranty on parts.
E
Ex
E
Ex
High High
RatedRated
point point
Low Low
MiddleMiddle
[0.04] [0.04]
[0.04] [0.04]
Low Low
RatedRated
point point
SEZ Static Performance Curves
0
0
[141] [141] [176] [176] [212] [212] [247] [247] [282] [282] [318] [318] [353] [353]
rate [CFM]
AirflowAirflow
rate [CFM]
SEZ-KD12NA4
SEZ-KD12NA4
SEZ-KD09NA4
SEZ-KD09NA4
[0.20]
[0.20]
(External
pressure
0.14[in.WG])
208/230V
(External
staticstatic
pressure
0.14[in.WG])
208/230V
60Hz60Hz
[0.32] [0.32]
Limit Limit
External Static Pressure [in.WG]
External Static Pressure [in.WG]
External Static Pressure [in.WG]
External Static Pressure [in.WG]
(External
pressure
0.20[in.WG])
208/230V
(External
staticstatic
pressure
0.20[in.WG])
208/230V
60Hz60Hz
70
70
[0.12]
[0.28] [0.28]
[0.12]
External static pressure [in.WG]
[0.16]
High
Rated point
Low
[0.04]
[318]
0
[141]
[353]
[176]
[212]
[247]
[282]
Airflow rate [CFM]
[318]
(External static pressure 0.06[in.WG]) 208/230V 60Hz
20
20
[0.08] [0.08]
Rated point
Rated point
[0.20] static pressure 0.20[in.WG]) 208/230V 60Hz
(External
RatedRated
point point
High
[0.20] [0.20]
[0.08]
[0.08]
[0.16] [0.16]
[0.04]
[0.08] [0.08]
Low
0 [0.04] 0
[0.04]
[212]
[247]
[282]
[318]
[353]
[388]
[424]
[212]
[247]
[282]
[318]
[353]
[388]
[424]
0
Airflow rateAirflow
[CFM]rate [CFM]
0
[141] [141] [176] [176] [212] [212] [247] [247] [282] [282] [318] [318] [353] [353]
rate [CFM]
AirflowAirflow
rate [CFM]
SEZ-KD15NA4
SEZ-KD15NA4
(External
(External
static static
pressure
pressure
0.06[in.WG])
0.06[in.WG])
208/230V
208/230V
60Hz 60Hz
SEZ-KD12NA4
SEZ-KD12NA4
(External
static pressure
0.20[in.WG])
208/230V
(External
static pressure
0.20[in.WG])
208/230V
60Hz 60Hz
[0.20] [0.20]
Limit Limit
[0.32]
[0.32]
Middle
2]
[318]
[353]
30V 60Hz
[0.04]
0
[212]
0
[247]
[141]
[176]
[282]
[388]
High
[0.20]
Rated point
Middle
[565]
0
[212]
[424]
[353]
[388]
[424]
[459]
Airflow rate [CFM]
[247]
[282]
[318]
[0.20]
80
[0.32]
[494]
[353]
[530]
[388]
External Static Pressure [in.WG]
External Static Pressure [in.WG]
High
[565] [600] [636] [671]
[565]
10
[0.04]
0
[318]
0
[282]
High
Rated point
Low
Low
40
40
[0.16]
20 [0.16]
20
[0.08][0.08]
30
30
[0.12] [0.12]
10
2010 20
[0.08]
[0.08]
[0.04][0.04]
Low
RatedRated
pointpoint
[353] [388]
[318]
[353]
[424]
[494]
Low Low
Low
[530]
RatedRated
pointpoint
Low
[424]
SEZ-KD18NA4
SEZ-KD18NA4
SEZ-KD18NA4
SEZ-KD18NA4
(External
(External
staticstatic
pressure
pressure
0.14[in.WG])
0.14[in.WG])
208/230V
208/230V
60Hz60Hz
[459] [494] [530] [565] [600] [636] [671]
Airflow[424]
rate [CFM]
[388]
[459]
Airflow rate [CFM]
Rated point
Rated point
Middle
Middle
Middle
Middle
10
10
[0.04] [0.04]
0
0
[318]
[318]
[353] [353]
[388] [388]
[424] [424]
[459] [459]
[494] [494]
[530] [530]
[565] [565]
[600] [600]
[636] [636]
[671] [671]
0
0
Airflow
Airflow
rate [CFM]
rate
[CFM]
[282] [282]
[318] [318]
[353] [353]
[388]
[388]
[424]
[424]
[459]
[459]
[494] [494]
[530] [530]
[565] [565]
Airflow Airflow
rate [CFM]
rate [CFM]
Airflow
Airflow
rate [CFM]
rate
[CFM]
[282] [282]
[318] [318]
[353] [353]
[388]
[388]
[424]
[424]
[459]
[459]
[494] [494]
[530] [530]
[565] [565]
Airflow Airflow
rate [CFM]
rate [CFM]
(External
(External
staticstatic
pressure
pressure
0.20[in.WG])
0.20[in.WG])
208/230V
208/230V
60Hz60Hz
[0.32][0.32]
LimitLimit
[565]
[0.28][0.28]
[0.24][0.24]
High High
[0.20][0.20]
[0.16][0.16]
Middle
Middle
RatedRated
pointpoint
[0.12][0.12]
Rated point
Low
2010
[0.04]
[0.08]
Rated point
Rated point
Rated point
MiddleMiddle
Middle
Middle
30 30
50 [0.12]
50
[0.12]
[0.20] [0.20]
[0.04] [0.04]
0
0
[388] [388]
[424] [424]
[459] [459]
[494] [494]
[530] [530]
[565] [565]
[600] [600]
[636] [636]
[671] [671]
0 [318] [318]
0 [353] [353]
[565]
High High
High High
LimitLimit
Middle
Middle
40
[0.16]
20
[0.08]
30
[0.12]
LimitLimit
Limit Limit
70
70
40 [0.28]
40
[0.28]
[0.16][0.16]
[0.28][0.28]
30
50
[0.12]
[0.20]
Rated point
High High
Limit
Limit
60
[0.24]
gh
[0.20][0.20]
80
80
[0.32] [0.32]
[0.32][0.32]
7040
[0.28]
[0.16]
High
[0.08][0.08]
[0.04][0.04]
[0.08] [0.08]
Low
50 static pressure 0.20[in.WG]) 208/230V 60Hz
(External
Limit
230V 60Hz
High
Airflow rate [CFM]
SEZ-KD18NA4
(External static pressure 0.06[in.WG]) 208/230V 60Hz
SEZ-KD15NA4
Limit
High High
Low Low
[318]
Low
60
60
[0.24] [0.24]
[0.16] [0.16]
[0.12]
[0.04]
0
[282]
[0.04]
Limit Limit
[0.12][0.12]
[0.20] [0.20]
[0.08]
230V 60Hz
30V 60Hz
[530]
[0.28] [0.28]
Rated point
Low
0
[0.04]
[0.04]0
[282] [282]
[318] [318]
[353] [353]
[388] [388]
[424] [424]
[459] [459]
[494] [494]
[530] [530]
[565] [565]
Airflow Airflow
rate [CFM]
rate [CFM]
0
0
[212]
[247]
[282]
[318]
[353]
[388]
[424]
[212]
[247]
[282]
[318]
[353]
[388]
[424]
Airflow rateAirflow
[CFM]rate [CFM]
LimitLimit
[0.12] [0.12]
Low
Middle
Rated point
Rated point
Low
(External
(External
static static
pressure
pressure
0.20[in.WG])
0.20[in.WG])
208/230V
208/230V
60Hz 60Hz
50
50
[0.16][0.16]
Middle
[0.08]
[0.16]
Middle
Low
[0.04] [0.04]
[0.08]
[0.08]
[0.32] [0.32]
[0.24] [0.24]
[0.24]
[0.12]
[0.12]
(External
(External
static static
pressure
pressure
0.14[in.WG])
0.14[in.WG])
208/230V
208/230V
60Hz 60Hz
External Static Pressure [in.WG]
[530]
Rated point
Rated point
Low
[0.12]
Low Low
[0.20][0.20]
RatedRated
pointpoint
[0.12][0.12]
[0.08][0.08]
[0.04][0.04]
[0.04][0.04]
Airflow
Airflow
rate [CFM]
rate [CFM]
Middle
Middle
[0.16][0.16]
[0.08][0.08]
0
0
[318] [318]
[353] [353]
[388] [388]
[424] [424]
[459] [459]
[494] [494]
[530] [530]
[565] [565]
[600] [600]
[636] [636]
[671] [671]
High High
[0.24][0.24]
Low Low
0
0
[318] [318]
[353] [353]
[388] [388]
[424] [424]
[459] [459]
[494] [494]
[530] [530]
[565] [565]
[600] [600]
[636] [636]
[671] [671]
Airflow
Airflow
rate [CFM]
rate [CFM]
Note: ESP at 208/230V, 60 Hz. See manual for Static Performance Curve, including at 0.02 in W.G.
SEZ-KD18NA4
(External static pressure 0.20[in.WG]) 208/230V 60Hz
[0.32]
High
MiddleMiddle
[0.16]
[0.16]
[0.08] [0.08]
SEZ-KD18NA4
SEZ-KD18NA4
SEZ-KD15NA4
SEZ-KD15NA4
(External
(External
staticstatic
pressure
pressure
0.06[in.WG])
0.06[in.WG])
208/230V
208/230V
60Hz60Hz
Limit
Limit
[0.16]
[0.28]
Middle
High High
Rated point
Rated point
High
SEZ-KD18NA4
SEZ-KD18NA4
SEZ-KD15NA4
SEZ-KD15NA4
(External
(External
staticstatic
pressure
pressure
0.02[in.WG])
0.02[in.WG])
208/230V
208/230V
60Hz60Hz
External Static Pressure [in.WG]
External Static Pressure [in.WG]
ExternalExternal
Static Pressure
[in.WG][in.WG]
Static Pressure
Rated point
[494]
[388]
[318]
[0.32]
High
ted point
3]
[353]
(External static pressure 0.06[in.WG]) 208/230V 60Hz
High
[494]
[318]
rate [CFM][282]
[212] Airflow[247]
Airflow rate [CFM]
Middle
Low
Low
[0.20]
(External
static pressure 0.20[in.WG]) 208/230V 60Hz
Limit
Low
High
0
[0.04] 0 [0.04]
[282] [282]
[318] [318]
[353] [353]
[388] [388]
[424] [424]
[459] [459]
[494] [494]
[530] [530]
[565] [565]
Airflow Airflow
rate [CFM]
rate [CFM]
0
0
[424]
[212]
[247]
[282]
[318]
[353]
[388]
[424]
[212]
[247]
[282]
[318]
[353]
[388]
[424]
Airflow rateAirflow
[CFM]rate [CFM]
[353]
SEZ-KD12NA4
Limit
[0.08]
[0.08]
Low
SEZ-KD15NA4
0V 60Hz
Rated point
MiddleMiddle
High
Rated point
[0.12]
[0.12]
[0.04] [0.04]
[0.24]
[0.12] [0.12]
[0.20]
[0.20]
External Static Pressure [in.WG]
[424]
High High
[0.16]
External
Static
Pressure
[in.WG]
External
Static
Pressure
[in.WG]
[388]
[0.16]
Rated point
Low
ed point
[0.20]
[0.20]
[0.08] [0.08]
[0.24]
External Static Pressure [in.WG]
[0.12]
Limit
External Static Pressure [in.WG]
External Static Pressure [in.WG]
Middle
[0.16]
[0.08]
Limit
Limit
[0.16] [0.16]
[0.28]
[0.28]
External
Static
Pressure
[in.WG]
External
Static
Pressure
[in.WG]
High
[0.24]
External Static Pressure [in.WG]
External Static Pressure [in.WG]
Rated point
[0.24]
Limit
External Static Pressure [in.WG]
External Static Pressure [in.WG]
[0.12]
[0.20]
[0.04]
[0.08]
]
Limit
External
Static
Pressure
[in.WG]
External
Static
Pressure
[in.WG]
High
[0.24]
[0.28]
[0.28]
[0.12] [0.12]
External Static Pressure [in.WG]
ed point
High
External Static Pressure [in.WG]
External
StaticStatic
Pressure
[in.WG]
External
Pressure
[in.WG]
Limit
High
Limit
[0.16]
[0.28]
External Static Pressure [in.WG]
[0.32]
High
Low Low
Low
Limit Limit
it
Limit
Middle
Middle
Middle Middle
Rated point
Rated point
[0.12] [0.12]
[0.04]
[0.32]
[0.32]
High High Limit
[0.24] [0.24]
[0.12]
[0.12]
LowLow Low
(External
static pressure 0.14[in.WG]) 208/230V 60Hz
(External
[0.16] static
[0.16] pressure 0.14[in.WG]) 208/230V 60Hz
SEZ-KD09NA4
0V 60Hz
High
High
RatedRated
point point
Middle
Middle
Middle Middle
SEZ-KD15NA4
SEZ-KD15NA4
(External
(External
static static
pressure
pressure
0.02[in.WG])
0.02[in.WG])
208/230V
208/230V
60Hz 60Hz
SEZ-KD12NA4
SEZ-KD12NA4
SEZ-KD12NA4
0V 60Hz
40
40
[0.16] [0.16]
Low
10
10
0
0[0.04] [0.04]
[212]
[247]
[282]
[318]
[353]
[388]
[424]
[212]
[247]
[282]
[318]
[353]
[388]
[424]
0
Airflow rateAirflow
[CFM]rate [CFM]
0
[353]
[141] [141] [176] [176] [212] [212] [247] [247] [282] [282] [318] [318] [353] [353]
rate [CFM]
AirflowAirflow
rate [CFM]
ated point
]
High High
30
30
[0.12] [0.12]
[0.04]
[0.04]
Middle
Limit
Limit
50
50
[0.20] [0.20]
[0.08]
[0.08]
High
[0.12]
[0.08]
60
60
[0.24] [0.24]
Limit Limit
[0.16]
[0.16]
[0.28] [0.28]
External Static Pressure [in.WG]
80
80
[0.32] [0.32]
Limit
External Static Pressure [in.WG]
[0.20]
Limit
static pressure
0.06[in.WG])
208/230V
(External(External
static pressure
0.06[in.WG])
208/230V
60Hz 60Hz
SEZ-KD09NA4
SEZ-KD09NA4
[0.16]
[0.16]
(External static pressure 0.06[in.WG]) 208/230V 60Hz
V 60Hz
SEZ-KD12NA4
SEZ-KD12NA4
static pressure
0.02[in.WG])
208/230V
(External(External
static pressure
0.02[in.WG])
208/230V
60Hz 60Hz
SEZ-KD09NA4
External
Static Pressure
External
Static Pressure
[in.WG] [in.WG]
E AND CORRECTED AIR FLOW
0
0
[141] [141] [176] [176] [212] [212] [247] [247] [282] [282] [318] [318] [353] [353]
rate [CFM]
AirflowAirflow
rate [CFM]
MITSUBISHI ELECTRIC / m-series / specifications / 27
Single Zone I SLZ Heat Pump
Model Name
Rated Capacity
Capacity Range
Cooling *1
Heating at 47° F *2
Heating at 17° F *3
Power Supply
Voltage
Indoor Unit
Outdoor Unit
8,400
3,100-10,900
700
920
1,460
15
1.2
0.84
15.4
2.3
0.77
16
4.5
0.67
Rated Capacity
Btu/h
Capacity Range
Total Input
HSPF (IV)
Rated Capacity
Rated Total Input
Maximum Capacity
Phase, Cycle, Voltage
Indoor - Outdoor S1 - S2
Indoor - Outdoor S2 - S3
MCA
Fan Motor
Btu/h
W
Btu/h/W
Btu/h
W
Btu/h
10,900
13,600
18,000
3,100-14,100
930
3,100-22,000
1,950
280-320-390
0.23
3,100-17,100
1,180
9.6
8,300
930
8,300
1 Phase, 60Hz, 208 / 230V *4
AC 208-230V
DC 12-24V
1
0.28
DRY (CFM)
280-320-350
280-320-390
WET (CFM)
dB(A)
250-290-320
250-290-350
250-290-350
29-32-38
30-34-39
31-35-40
Galvanized-Steel Sheets; Grille: Munsell 6.4Y 8.9/0.4
A
F.L.A.
6,200
740
6,200
W: In.
22-7/16 (25-5/8)
D: In.
H: In.
Lbs.
H: In.
In.
22-7/16 (25-5/8)
9-1/4 (13/16)
36 (7)
19-11/16
1-1/4
Type
MCA
MOCP
Fan Motor
Airflow (Cooling/Heating)
Refrigerant Control
Dimensions
Connection Method
DC INVERTER-driven Twin
Rotary
7.4
9.3
1,243/1,229
DC INVERTER-driven
R.L.A.
L.R.A.
CFM
6.6
8.2
1,151/1,225
dB(A)
dB(A)
46
50
1,229/1,172
Linear Expansion Valve
Reverse Cycle
49
51
Munsell No. 3Y 7.8/1.1
31-1/2
11-1/4
W: In.
D: In.
H: In.
Refrigerant Pipe Length
0.28
12
15
0.50
Defrost Method
Sound Pressure Level at Cooling *1
Sound Pressure Level at Heating *2
External Finish Color
10,200
1,310
12,000
Select from MHK1 (Preferred), PAR-21MA, or PAR-FL/FA32 Remote Controllers
A
A
F.L.A.
Model (Type)
Compressor
Refrigerant Pipe
15,000
3,800-17,700
SEER
Pints/h
Weight Unit (Grille)
Drain-lift Mechanism (Included)
Field Drainpipe Size O.D.
Refrigerant
11,100
3,400-13,300
W
Dimension Unit (Grille)
Outdoor Unit
SLZ-KA15NA
SUZ-KA15NA
Energy Efficiency
Moisture Removal
Sensible Heat Factor
Sound Pressure Level
External Finish
Remote Controller
SLZ-KA12NA
SUZ-KA12NA
Total Input
Airflow at Cooling/Heating (Lo-Med-Hi)
Indoor Unit
Btu/h
Btu/h
SLZ-KA09NA
SUZ-KA09NA
21-5/8
Weight
Type
Charge
Oil
Gas Side O.D.
Liquid Side O.D.
Lbs.
66
Lbs., Oz.
Type (fl. oz.)
In.
In.
2
Height Difference (Max.)
Ft.
40
Length (Max.)
Indoor/Outdoor
Ft.
65
Flared/Flared
NOTES: Test conditions are based on AHRI 210/240.
*1. Rating conditions (cooling)-Indoor: D.B. 80º F (27º C), W.B. 67º F (19º C); Outdoor: D.B.
95º F (35º C), W.B. 75º F (24º C).
*2. Rating conditions (heating)-Indoor: D.B. 70º F (21º C), W.B. 60º F (16º C); Outdoor: D.B.
47º F (8º C), W.B. 43º F (6º C).
*3. Rating conditions (heating)-Indoor: D.B. 70º F (21º C), W.B. 60º F (16º C); Outdoor: D.B.
17º F (-8º C), W.B. 15º F (-9º C).
28 / MITSUBISHI ELECTRIC / m-series / specifications
77
R410A
80
2, 9
NEO22 (10.8)
3/8
NEO22 (15.2)
1/2
1/4
*4. Indoor units receive power from outdoor units through field-supplied interconnected wiring.
Specifications are subject to change without notice.
LIMITED WARRANTY I Seven-year warranty on compressor. Five-year warranty on parts.
Multi-zone MXZ-B Heat Pump
Model Name
Outdoor Unit
Cooling *1
Non-ducted/
Ducted
Heating at
47° F *2
Non-ducted/
Ducted
Indoor Unit
MXZ-2B20NA-1 *5
MXZ-3B24NA-1 *6
MXZ-3B30NA-1
Rated Capacity
Btu/h
18,000/20,000
22,000/23,600
28,400/27,400
35,400/34,400
Capacity Range
Total Input
Rated Capacity
Btu/h
W
Btu/h
7,800-20,000
2,190 (630-2,190)
22,000/22,000
12,600-25,500
2,460 (1,000-2,950)
25,000/24,600
12,600-28,400
3,330 (1,000-3,330)
28,600/27,600
12,600-36,400
3,940 (1,000-4,020)
36,000/34,400
Capacity Range
Btu/h
8,500-25,500
11,400-30,600
11,400-36,000
11,400-43,000
W
2,620 (520-2,620)
1,900 (740-2,600)
2,220 (740-2,820)
3,100 (740-3,940)
Btu/h
W
Btu/h
W
Btu/h
12,500/12,500
1,350/1,430
14,500/12,500
1,500/1,430
11,113
A
A
F.L.A.
Model
(Type)
R.L.A.
L.R.A.
CFM
15
Total Input
Rated Capacity
Rated Total Input
Maximum Capacity
Maximum Total Input
Maximum Capacity
Phase, Cycle, Voltage
Indoor - Outdoor S1 - S2
Indoor - Outdoor S2 - S3
MCA
MOCP
Fan Motor
Heating at
17° F *3
Non-ducted/
Ducted
Heating at 5° F
Power Supply
Voltage
Compressor
Airflow (Cooling/Heating)
Refrigerant Control
0.96
14,000/14,000
16,000/15,100
1,380/1,570
2,120/2,140
18,800/17,000
18,800/18,000
2,120/2,230
2,120/2,140
13,336
15,704
1-phase, 60Hz, 208 / 230V *8
AC 208 / 230V
DC12-24V
18
20
0.93
Sound Pressure Level at
Cooling *1
Sound Pressure Level at
Heating *2
11
15
14.4
1,485/1,640
2,068/1,605
1,365/1,605
Linear Expansion Valve
2,068/2,068
Reverse Cycle
dB(A)
49
dB(A)
51
W: In.
D: In.
H: In.
Lbs.
Weight
No. of Units
Indoor Unit
Remote Controller
Type
Type
Charge
Refrigerant
Oil
Refrigerant Pipe
Refrigerant Pipe Length
54
Connection Method
33-1/16
13
27-15/16
130
2
5, 15
Ft.
Lineset length for each individual indoor unit (Max.)
Ft.
57
153
2, 3, 4
Associated with the Indoor Unit
R410A
7, 11
NEO22 (23.7)
Height Difference (Max.)
54
49
Type (fl.
oz.)
In.
In.
49
Munsell No. 3.0Y 7.8 / 1.1
35-7/16
12-5/8
35-7/16
150
2, 3
2, 3
Lbs., Oz.
Gas Side O.D.
Liquid Side O.D.
Length (Max.)
Indoor/Outdoor
23
25
DC INVERTER-driven Twin Rotary
External Finish Color
Dimensions
22,200/20,300
2,430/2,340
24,600/25,400
3,340/3,450
18,671
10.1
Defrost Method
Outdoor Unit *4
MXZ-4B36NA-1 *7
8, 13
NEO22 (29.4)
A,B: 3/8
A: 1/2; B,C: 3/8
1/4
A: 1/2; B,C,D: 3/8
49/33 *9
82
Ft.
164 (A+B)
230 (A+B+C)
Flared/Flared
230 (A+B+C+D)
NOTES: Test conditions are based on AHRI 210/240. One indoor unit is turned off during low-speed testing under the new test conditions. Systems actually exhibit higher energy efficiencies during normal operation.
*1. Rating conditions (cooling)-Indoor: D.B. 80º F (27º C), W.B. 67º F (19º C); Outdoor: D.B. 95º F
(35º C), W.B. 75º F (24º C).
*2. Rating conditions (heating)-Indoor: D.B. 70º F (21º C), W.B. 60º F (16º C); Outdoor: D.B. 47º F
(8º C), W.B. 43º F (6º C).
*3. Rating conditions (heating)-Indoor: D.B. 70º F (21º C), W.B. 60º F (16º C); Outdoor: D.B. 17º F
(-8º C), W.B. 15º F (-9º C).
*4. Refer to pages 12 and 13 for Indoor Unit specifications.
Power factor equals 97%.
Specifications are subject to change without notice
*5. Data from combination of two Indoor Units 9,000 Btu/h (non-ducted) or one 9,000 Btu/h and
one 12,000 Btu/h (ducted).
*6. Data from combination of two Indoor Units 6,000 Btu/h and one 9,000 Btu/h (non-ducted) or
three 9,000 Btu/h (ducted).
*7. Data from combination of four Indoor Units 9,000 Btu/h (non-ducted and ducted).
*8. Indoor units receive power from outdoor units through field-supplied interconnected wiring.
*9. 49’ Applies to installations where the outdoor unit is installed below the indoor unit.
LIMITED WARRANTY | Seven-year warranty on compressor. Five-year warranty on parts.
Multi-zone Efficiency Ratings
Model
MXZ-2B20NA-1
MXZ-2B20NA-1 Energy Star®
MXZ-3B24NA-1
Indoor Unit Type
SEER
HSPF
Non-ducted
18
8.9
Ducted and Non-ducted
16.75
8.7
MXZ-3B30NA-1
Indoor Unit Type
SEER
Non-ducted
17.5
HSPF
10.5
Ducted and Non-ducted
16
10.0
Ducted
15.5
8.5
Ducted
14.5
9.5
2 x MSZ-GE09NA-8
18
8.9
Non-ducted
18
9.3
Non-ducted
17.5
9.3
Ducted and Non-ducted
16.25
8.9
Ducted
15.0
8.5
MXZ-3B24NA-1 Energy Star®
2 x MSZ-GE06NA-8
1 x MSZ-GE09NA-8
17.5
9.3
MXZ-3B24NA-1 Energy Star
2 x MSZ-GE06NA-8
1 x MSZ-GE12NA-8
17.5
9.3
®
Model
MXZ-4B36NA-1
MXZ-8B48NA
Ducted and Non-ducted
16.5
9.2
Ducted
15.0
9.0
Non-ducted
15
8.7
Ducted and Non-ducted
14.8
8.8
Ducted
14.7
8.9
MITSUBISHI ELECTRIC / m-series / specifications / 29
Multi-zone MXZ-B Heat Pump
Model Name
Outdoor Unit
Cooling *1 Nonducted/Ducted
Heating at 47° F
*2 Non-ducted/
Ducted
Indoor Unit
Heating at 17° F
*3 Non-ducted/
Ducted
Heating at 5° F
Power Supply
MXZ-8B48NA
Rated Capacity
Btu/h
Rated Total Input
W
48,000 / 48,000
Maximum Capacity
Btu/h
54,000
Rated Capacity
Btu/h
54,000 / 54,000
Rated Total Input
W
Maximum Capacity
Btu/h
60,000
Rated Capacity
Btu/h
33,000 / 34,700
Rated Total Input
W
Maximum Capacity
Btu/h
Maximum Capacity
Btu/h
5,780 / 6,470
4,820 / 5,270
2,950 / 3,390
36,600 / 36,500
32,400
Phase, Cycle, Voltage
1 Phase, 60Hz, 208 / 230V
Indoor - Outdoor S1 - S2
Voltage
A
Recommended Fuse/Breaker Size
A
50
Type x Quantity
Propeller x 2
Fan Motor
Motor Output
(kW)
0.086 + 0.086
Model (Type)
DC INVERTER-driven Scroll
Compressor
Motor Output
(kW)
CFM
3,530
Linear Expansion Valve
Sound Pressure Level at Cooling *1 dB(A)
54
Sound Pressure Level at Heating *2 dB(A)
55
Munsell No. 3Y 7.8 / 1.1
W: In.
37-7/16
Dimensions
D: In.
13+1-3/16
Weight
Total Capacity 22%-130%
H: In.
Lbs.
Btu/h
53-3/16
278
12,000 - 70,200
Indoor Unit
Total Connected Capacity
Remote Controller
Type
6,000- 24,000 / 2-8
Associated with
Indoor Unit Model
R410A
Type
Charge
Lbs., Oz.
Oil
Type (fl. oz.)
Gas Side O.D.
In.
Liquid Side O.D.
In.
3/8
Height Difference (Max.)
Ft.
66/98 *4
Ft.
230
Ft.
49
Ft.
197*
Ft.
180
Ft.
377
Maximum distance between (Outdoor unit and farthest indoor unit)
Maximum pipe length - Branch box
to Indoor Unit
Total maximum line length between
branch box and all connected
indoor units
Length from outdoor unit
to branch box (Max.)
Total length (Max.)
Connection Method
Note: Maximum connected capacity is the maximum
total of all connected indoor units, NOT the maximum
capacity produced.
2.9
External Finish Color
Refrigerant Pipe Length
Specifications are subject to change without notice.
32
Refrigerant Control
Refrigerant Pipe
Power factor equals 97%.
DC12-24V
MCA
Airflow (Cooling/Heating)
Refrigerant
*1.Rating conditions (cooling)-Indoor: D.B. 80º F (27º C), W.B.
67º F (19º C); Outdoor: D.B. 95º F (35º C), W.B. 75º F (24º
C).
*2.Rating conditions (heating)-Indoor: D.B. 70º F (21º C), W.B.
60º F (16º C); Outdoor: D.B. 47º F (8º C), W.B. 43º F (6º C).
*3.Rating conditions (heating)-Indoor: D.B. 70º F (21º C), W.B.
60º F (16º C); Outdoor: D.B. 17º F (-8º C), W.B. 15º F (-9º C).
*4.66’ applies to installations when the outdoor unit is installed
below the indoor unit.
AC 208-230V
Indoor - Outdoor S2 - S3
Outdoor Unit
NOTES: Test conditions are based on AHRI 210/240. One
indoor unit is turned off during low-speed testing under the
new test conditions.
Systems actually exhibit higher energy efficiencies during
normal operation.
18, 11.2
FV50S (73)
5/8
Indoor/Outdoor
Only a single lineset is needed from the outdoor
unit to branch box.
See page 34 for MXZ-B efficiency information
Branch Boxes:
(At least one branch box required)
Flared/Flared
*Includes both branch boxes if there are two.
Model Name
PAC-AKA31BC
Connectable No. of Indoor Units
Power Supply
PAC-AKA51BC
3
Phase, Cycle, Voltage
5
1 Phase, 60Hz, 208 / 230V
Power Input
W
3
Current
A
0.05
External Finish
Dimensions
Galvanized-Steel Sheets
Width
In.
Depth
In.
Height
In.
Net Weight
Lbs.
Refrigerant Pipe
Dimensions
17-3/4
11
7-3/4
19
Outdoor Unit to Gas (In.)
Branch Box
Liquid (In.)
Branch Box to
Indoor Units
Drainpipe Size (O.D.)
PAC-AKA51BC
21
5/8
3/8
Gas (In.)
A,B,C: 3/8
Liquid (In.)
A,B,C: 1/4
In.
A,B,C,D: 3/8; E: 1/2
A,B,C,D,E: 1/4
3/4
LIMITED WARRANTY | Seven-year warranty on compressor. Five-year warranty on parts.
30 / MITSUBISHI ELECTRIC / m-series / specifications
PAC-AKA31BC
MSZ Wall-mounted Indoor Units
(FOR MXZ-B OUTDOOR UNITS)
Model Name
Indoor Unit
MSZFE09NA-8
MSZFE12NA-8
MSZ-FE18NA
MSZGE06NA-8
MSZGE09NA-8
MSZGE12NA-8
MSZGE15NA-8
MSZGE18NA-8
MSZ-GE24NA
Cooling *1
Rated Capacity Btu/h
9,000
12,000
18,000
6,000
9,000
12,000
14,000
17,200
22,500
Heating at
47° F *2
Rated Capacity Btu/h
10,900
13,600
21,600
7,200
10,900
14,400
18,000
21,600
27,600
Power Supply
Phase, Cycle, Voltage
Voltage
Fan
1-phase, 60Hz, 208 / 230V *3
Indoor - Outdoor S1 - S2
AC 208 / 230V
Indoor - Outdoor S2 - S3
DC12-24V
MCA
A
1.0
Fan Motor
F.L.A.
0.76
Airflow at Cooling (Quiet-LoMed-Hi-Super
Hi or Lo-MedHi-Powerful)*1
DRY
(CFM)
162-226339-381
162-226381-410
388-469628-738
145-170-237-321-399
145-170205-272230-275237-321-399 335-420-533 339-420-533
388-469628-738
WET
(CFM)
144-202307-343
144-202350-367
347-420562-661
109-134-201-286-364
109-134170-237194-240201-286-364 300-385-498 304-385-498
347-420562-661
Airflow at Heating (Quiet-LoWET
Med-Hi-Super
(CFM)
Hi or Lo-MedHi-Powerful) *2
166-240367-381
166-240399-420
388-469628-738
145-170145-170145-170205-247230-275233-321-406 237-321-406 237-321-406 304-367-463 339-431-512
388-469628-738
Sound Pressure Level at Cooling
(Quiet-Lo-Med-Hi-Super Hi or
dB(A)
Lo-Med-Hi-Powerful) *1
22-31-39-42 22-33-43-45 34-41-49-53
19-22-30-37-43
19-22-3037-45
26-32-3844-49
28-33-3844-49
34-41-49-53
Sound Pressure Level at Heating
(Quiet-Lo-Med-Hi-Super Hi or
dB(A)
Lo-Med-Hi-Powerful) *2
22-31-40-42 22-23-43-44 32-41-49-52
19-22-30-37-43
19-22-3037-43
26-30-3540-46
28-33-3843-49
32-41-49-52
External Finish Color
Dimension Unit
Munsell No. 1.0Y 9.2 / 0.2
W: In.
31-3/8
43-5/16
31-7/16
43-5/16
D: In.
10-1/8
9-3/8
9-1/8
9-3/8
H: In.
11-5/8
12-13/16
11-5/8
12-13/16
Weight Unit
Lbs.
27
37
22
37
Field Drainpipe Size O.D.
In.
5/8
Remote
Controller
Type
Hand-held Wireless Remote Controller (Optional MHK1 Backlit Wireless Wall-mounted Remote Controller)
Refrigerant
Type
R410A
Refrigerant Pipe
Connection
Method
Gas Side O.D.
In.
3/8
5/8
Liquid Side O.D. In.
1/4
8
Indoor/Outdoor
NOTES: Test conditions are based on AHRI 210/240.
*1. Rating conditions (cooling)-Indoor: D.B. 80º F (27º C), W.B. 67º F (19º C);
Outdoor: D.B. 95º F (35º C), W.B. 75º F (24º C).
*2. Rating conditions (heating)-Indoor: D.B. 70º F (21º C), W.B. 60º F (16º C);
Outdoor: D.B. 47º F (8º C), W.B. 43º F (6º C).
*3. Indoor units receive power from outdoor units through field-supplied wiring.
3/8
1/2
1/4
5/8
3/8
Flared/Flared
Specifications are subject to change without notice.
LIMITED WARRANTY I Seven-year warranty on compressor. Five-year warranty on parts.
For data on specific indoor unit combinations, see page 16 - combination tag
MITSUBISHI ELECTRIC / m-series / 31
MITSUBISHI ELECTRIC / m-series / specifications / 31
SEZ Horizontal-ducted Indoor Unit
(FOR MXZ-B OUTDOOR UNITS)
SEZ-KD09NA4
SEZ-KD12NA4
SEZ-KD15NA4
SEZ-KD18NA4
Cooling *1
Model Name
Rated Capacity
Btu/h
8,100
11,500
14,100
17,200
Heating at 47˚ F *2
Rated Capacity
Btu/h
10,900
13,600
18,000
21,600
Power Supply
Indoor Unit
Phase, Cycle, Voltage
1-Phase, 60Hz, 208 / 230V *4
Indoor - Outdoor S1-S2
Voltage
Fan
AC 208-230V
DC12-24V
Indoor - Outdoor S2-S3
MCA
A
1.0
Fan Motor Output
W
96
Airflow at Cooling/Heating
(Lo-Med-Hi)
CFM
External Static Pressure *3
In. W.G.
Sound Pressure Levels (Lo-Med-Hi)
194-247-317
dB(A)
247-317-388
353-441-529
0.02-0.06-0.14-0.20
23-26-30
23-28-33
External Finish
30-34-37
Dimension
31-1/8
39
D: In.
27-9/16
H: In.
7-7/8
Weight
Lbs.
Drain-lift Mechanism (Included)
H: In.
21-11/16
Field Drainpipe Size O.D.
In.
1-1/4
Refrigerant
Refrigerant Pipe
30-34-38
Galvanized-steel Sheets
W: In.
Remote Controller
423-529-635
Type
42
50
Liquid Side O.D.
54
62
Select from MHK1 (Preferred), PAR-21MA, or PAR-FL/FA32 Remote Controllers
Type
Gas Side O.D.
46-7/8
R410A
In.
3/8
1/2
1/4
Connection Method
Flared/Flared
Connection Method
Flared/Flared
Notes:
*1. Cooling-Indoor: D.B. 80º F (26.7º C), W.B. 67º F (19.4º C); Outdoor: D.B. 95º F (35º C), W.B. 75º F (23.9º C).
*2. Heating-Indoor: D.B. 70º F (21.1º C), W.B. 60º F (15.6º C); Outdoor: D.B. 47º F (8.3º C), W.B. 43º F (6.1º C).
*3. External static pressure is factory set to 0.06" W.G. Adjustable via the PAR-21MAA.
*4. Indoor units receive power from outdoor units through field supplied interconnected wiring.
Specifications are subject to change without notice.
LIMITED WARRANTY I Seven-year warranty on compressor. Five-year warranty on parts.
**For data on specific indoor unit combinations, see pages 14-17 and 29-30.
- Reference page 27 for SEZ static performance curves.
32 / MITSUBISHI ELECTRIC / m-series / specifications
MFZ Floor-mounted Indoor Unit
(FOR MXZ-B OUTDOOR UNITS)
Model Name
Indoor Unit
MFZ-KA09NA
MFZ-KA12NA
MFZ-KA18NA
Cooling *1
Rated Capacity
Btu/h
9,000
12,000
18,000
Heating at 47° F *2
Rated Capacity
Btu/h
10,900
14,400
21,600
Power Supply
Phase, Cycle, Voltage
Voltage
1-phase, 60Hz, 208 / 230V *3
Indoor - Outdoor S1 - S2
AC 208 / 230V
Indoor - Outdoor S2 - S3
DC12-24V
MCA
A
1
DRY (CFM)
169-205-251-314
177-215-261-321
251-279-325-394
WET (CFM)
163-197-241-303
170-207-252-309
241-269-313-379
(CFM)
177-198-219-332
184-201-219-335
261-275-297-434
Sound Pressure Level at Cooling
(Lo-Med-Hi-Super Hi) *1
dB(A)
25-30-35-40
26-31-36-41
35-38-42-46
Sound Pressure Level at Heating
(Lo-Med-Hi-Super Hi) *2
dB(A)
25-30-35-40
28-31-36-41
35-38-42-47
Airflow at Cooling/Heating
(Lo-Med-Hi)
Fan
Airflow at Heating
(Lo-Med-Hi-Super Hi) *2
External Finish Color
Munsell No. 1.0Y 9.2/0.2
Dimension Unit
Weight Unit
Field Drainpipe Size O.D.
W: In.
27-9/16
D: In.
7-7/8
H: In.
23-5/8
Lbs.
32
In.
5/8
Remote Controller
Type
Hand-held Wireless Remote Controller (Optional MHK1 Backlit Wireless Wall-mounted Remote Controller
or PAR-21MA Wired Wall-mounted Remote Controller with MAC-397IF Control Adapter)
Refrigerant
Type
R410A
Gas Side O.D.
In.
Liquid Side O.D.
In.
3/8
1/2
Refrigerant Pipe
Connection Method
1/4
Indoor/Outdoor
Flared/Flared
Notes
*1. Cooling-Indoor: D.B. 80º F (26.7º C), W.B. 67º F (19.4º C); Outdoor: D.B. 95º F (35º C), W.B. 75º F (23.9º C).
*2. Heating-Indoor: D.B. 70º F (21.1º C), W.B. 60º F (15.6º C); Outdoor: D.B. 47º F (8.3º C), W.B. 43º F (6.1º C).
*3. Indoor units receive power from outdoor units through field supplied interconnected wiring.
Specifications are subject to change without notice.
LIMITED WARRANTY I Seven-year warranty on compressor. Five-year warranty on parts.
Presently there is no 1:1 system with the MFZ indoor unit.
MITSUBISHI ELECTRIC / m-series / specifications / 33
SLZ Ceiling-recessed Indoor Unit
(FOR MXZ-B OUTDOOR UNITS)
Model Name
Indoor Unit
SLZ-KA09NA
SLZ-KA12NA
SLZ-KA15NA
Cooling *1
Rated Capacity
Btu/h
8,400
11,100
15,000
Heating at 47° F *2
Rated Capacity
Btu/h
10,900
13,600
18,000
Power Supply
Phase, Cycle, Voltage
Voltage
1-phase, 60Hz, 208 / 230V *3
Indoor - Outdoor S1 - S2
AC 208 / 230V
Indoor - Outdoor S2 - S3
DC12-24V
MCA
Fan Motor
A
1
F.L.A.
0.23
0.28
0.28
DRY (CFM)
280-320-350
280-320-390
280-320-390
WET (CFM)
250-290-320
250-290-350
250-290-350
Sound Pressure Level
(Lo-Med-Hi) *2
dB(A)
29-32-38
30-34-39
31-35-40
External Finish Color
Unit/Grille
Galvanized-steel Sheets/Munsell 6.4Y 8.9 / 0.4
W: In.
22-7/16 (25-5/8)
D: In.
22-7/16 (25-5/8)
H: In.
9-1/4 (13/16)
Weight Unit (Grille)
Lbs.
36 (7)
Drain-lift Mechanism (Included)
H: In.
19-11/16
Field Drainpipe Size O.D.
In.
1-1/4
Type
Select from MHK1 (Preferred), PAR-21MA, or PAR-FL/FA32 Remote Controllers
Fan
Airflow at Cooling/
Heating (Lo-Med-Hi)
Dimension Unit (Grille)
Remote Controller
Refrigerant
Refrigerant Pipe
Type
R410
Gas Side O.D.
In.
Liquid Side O.D.
In.
3/8
1/2
1/4
Connection Method
Indoor/Outdoor
Flared/Flared
Connection Method
Indoor/Outdoor
Flared/Flared
Notes:
*1. Cooling-Indoor: D.B. 80º F (26.7º C), W.B. 67º F (19.4º C); Outdoor: D.B. 95º F (35º C), W.B. 75º F (23.9º C).
*2. Heating-Indoor: D.B. 70º F (21.1º C), W.B. 60º F (15.6º C); Outdoor: D.B. 47º F (8.3º C), W.B. 43º F (6.1º C).
*3. Indoor units receive power from outdoor units through field supplied interconnected wiring.
34 / MITSUBISHI ELECTRIC / m-series / specifications
Specifications are subject to change without notice.
LIMITED WARRANTY I Seven-year warranty on compressor. Five-year warranty on parts.
Additional M-Series Information
M-Series operATING CONDITIONS
REFRIGERANT LINE LENGTH FLARE/FLARE
Indoor Intake
Air Temperature
Maximum
Cooling
Minimum
Maximum
Outdoor Intake
Air Temperature
95°F D.B., 71°F W.B. (MU; SUZ;
MXZ-2B20,3B24,3B30,4B36-1)
90°F D.B., 73°F W.B. (MUZ/Y-GE;
MUZ-FE; MUZ/Y-D)
115°F D.B. (MU; MUZ/Y-GE; MUZ/Y-D;
MUZ-FE; SUZ; MXZ-2B20/3B24/3B30/4B361,8B48)
67°F D.B., 57°F W.B. (MU; MUZ/YGE; MUZ/Y-D; MUZ-FE; SUZ;
MXZ-2B20/3B24/3B30/4B36-1)
14°F D.B. (MUZ/Y-GE; MUZ/Y-D; MUZ-FE;
SUZ; MXZ-2B20/3B24/3B30/4B36-1)
23°F D.B. (MXZ-8B48) 67°F D.B. (MU)
80°F D.B., 67°F W.B. (MU; MUZ/YGE; MUZ/Y-D; MUZ-FE; SUZ;
MXZ-2B20/3B24/3B30/4B36-1)
Heating
Minimum
Indoor Unit
70°F D.B., 60°F W.B. (MUZ-GE;
MUZ-D; MUZ-FE; SUZ;
MXZ-2B20/3B24/3B30/4B36-1)
75°F D.B., 65°F W.B. (MUZ/Y-GE; MUZ/Y-D;
MUZ-FE; SUZ; MXZ-B20/3B24/3B30/4B36-1)
70°F D.B. (MXZ-8B48)
-13°F D.B., -15°F W.B. (MUZ-FE)-4°F D.B.,
-5°F W.B. (SUZ; MUZ-GE)5°F D.B., 4°F W.B.
(MXZ-8B48NA) 6°F D.B., 5°F W.B. (MXZ2B20/3B24/ 3B30/4B36-1)14°F D.B., 13°F
W.B. (MUZ/Y-D)
Outdoor Unit
Length in Height
feet
in feet
MS-A09WA
MU-A09WA
65
35
MS-A12WA
MU-A12WA
65
35
MSY-GE09NA-8
MUY-GE09NA
65
40
MSY-GE12NA-8
MUY-GE12NA
65
40
MSY-GE15NA-8
MUY-GE15NA-1
65
40
MSY-GE18NA-8
MUY-GE18NA-1
100
50
MSZ-GE09NA-8
MUZ-GE09NA
65
40
MSZ-GE12NA-8
MUZ-GE12NA
65
40
MSZ-GE15NA-8
MUZ-GE15NA-1
65
40
MSZ-GE18NA-8
MUZ-GE18NA-1
100
50
MSY-GE24NA
MUY-GE24NA
100
50
MSZ-GE24NA
MUZ-GE24NA
100
50
* MU units operate at intake air temperature down to 10º F with the addition of an ICM-326HM-1 low temperature control.
MSY-D30NA-8
MUY-D30NA-1
100
50
M-Series systems are not suitable for critical room and low
ambient cooling applications. Use commercial grade P-Series
with full cooling capacity down to 0o F with wind baffle.
MSZ-D30NA-8
MUZ-D30NA-1
100
50
MSY-D36NA-8
MUY-D36NA-1
100
50
MSZ-D36NA-8
MUZ-D36NA-1
100
50
MSZ-FE09NA-8
MUZ-FE09NA-1
65
40
MSZ-FE12NA-8
MUZ-FE12NA1
65
40
MSZ-FE18NA
MUZ-FE18NA
100
50
SEZ-KD09NA4
SUZ-KA09NA
65
40
SEZ-KD12NA4
SUZ-KA12NA
65
40
SEZ-KD15NA4
SUZ-KA15NA
65
40
SEZ-KD18NA4
SUZ-KA18NA
100
50
SLZ-KA09NA
SUZ-KA09NA
65
40
SLZ-KA12NA
SUZ-KA12NA
65
40
SLZ-KA15NA
SUZ-KA15NA
65
40
MSZ-GE/FE; MFZ ; SEZ ; SLZ
MXZ-2B20NA-1
164
49*/33
MSZ-GE/FE; MFZ ; SEZ ; SLZ
MXZ-3B24NA-1
230
49*/33
MSZ-GE/FE ; MFZ; SEZ ; SLZ
MXZ-3B30NA-1
230
49*/33
MSZ-GE/FE ; MFZ; SEZ ; SLZ
MXZ-4B36NA-1
230
49*/33
MSZ-GE/FE ; MFZ; SEZ ; SLZ
MXZ-8B48NA
377
66*/98
REFRIGERANT LINESETS
Lineset
Model Number
Tube
Size (In.)
Length
Ft.
Insul.
MLS143812T-15
1/4 x 3/8
15
1/2"
MLS143812T-30
1/4 x 3/8
30
1/2"
MLS143812T-50
1/4 x 3/8
50
1/2"
MLS143812T-65
1/4 x 3/8
65
1/2"
MLS141212T-15
1/4 x 1/2
15
1/2"
MLS141212T-30
1/4 x 1/2
30
1/2"
MLS141212T-50
1/4 x 1/2
50
1/2"
MLS141212T-65
1/4 x 1/2
65
1/2"
MLS141212T-100
1/4 x 1/2
100
1/2"
MPLS385812T-10
3/8 x 5/8
10
1/2"
MPLS385812T-15
3/8 x 5/8
15
1/2"
MPLS385812T-30
3/8 x 5/8
30
1/2"
MPLS385812T-50
3/8 x 5/8
50
1/2"
MPLS385812T-65
3/8 x 5/8
65
1/2"
MPLS385812T-100
3/8 x 5/8
100
1/2"
Use With Mitsubishi
Electric Models
MS-A09WA; MSZ-GE06NA-8; MSY/ZGE09,12NA-8;
MSZ-FE09,12NA-8;
SEZ-KD09,12NA4;
MFZ-KA09,12NA
SLZ-KA09, 12NA
MS-A12WA;
MSY/Z-GE15,18NA-8;
SEZ-KD15,18NA4;
MFZ-KA18NA;
SLZ-KA15NA
MSY/Z-GE24NA;
MSY/Z-D30,36NA-8;
MXZ-8B48NA;
MSZ-FE18NA
*49’ & 66’ applies to installations where the outdoor unit is installed below the indoor unit.
For a complete
list of the Optional
accessoriess,
scan the tag to the
right, or visit http://
extranet.mehvac.
com/uploadedfiles/
optional
accessories.pdf
MITSUBISHI ELECTRIC / m-series / specifications / 35
Mitsubishi Electric Cooling & Heating
3400 Lawrenceville Suwanee Road, Suwanee, GA 30024
Phone: 888-467-7546 Fax: 800-658-1458
/mehvac
/mitsubishihvac
/mitsubishihvac
Mitsubishi Electric, H2i and the three diamond logo are registered trademarks of Mitsubishi Electric Corporation.
*Hyper-heating technology is a pending patent of Mitsubishi Electric Corporation.
RedLINK and RedLINK wireless technology logos are registered trademarks of Honeywell International.
See complete warranty for terms, conditions and limitations.
A copy is available from Mitsubishi Electric.
MSCG_5.12 60k OA
For more information visit www.mehvac.com
I
Printed In The U.S.A
Please Recycle