DAPAudio M9000 Product specifications

MANUAL
ENGLISH
DVMP-250
V1
Ordercode: D1133
Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands
DVMP-250
Table of contents
Warning ...............................................................................................................................................................................2
Unpacking Instructions .............................................................................................................................................2
Safety Instructions ......................................................................................................................................................2
Operating Determinations .......................................................................................................................................3
Connection with the mains .....................................................................................................................................4
Return Procedure ......................................................................................................................................................4
Claims ..........................................................................................................................................................................4
Description of the device .................................................................................................................................................5
Overview .....................................................................................................................................................................5
Frontside ......................................................................................................................................................................6
Backside ......................................................................................................................................................................6
Remote control ..........................................................................................................................................................7
Names and functions ........................................................................................................................................................8
Installation .........................................................................................................................................................................10
Set Up and Operation .....................................................................................................................................................10
Operations ........................................................................................................................................................................11
01) Preparation .......................................................................................................................................................11
02) Normal Playback .............................................................................................................................................11
03) Pause .................................................................................................................................................................11
04) Stop ....................................................................................................................................................................11
05) Previous and next ............................................................................................................................................11
06) Fast Forward/Reverse .....................................................................................................................................11
07) Video Mode .....................................................................................................................................................11
08) Step ....................................................................................................................................................................11
09) Repeat...............................................................................................................................................................11
10) Loop play ..........................................................................................................................................................11
11) Slow ....................................................................................................................................................................11
12) Program.............................................................................................................................................................12
13) Zoom ..................................................................................................................................................................12
14) Volume and Mute ...........................................................................................................................................12
15) Menu ..................................................................................................................................................................12
16) Subtitles .............................................................................................................................................................12
17) Angle .................................................................................................................................................................12
Before switching off the power .....................................................................................................................................13
System Setup ....................................................................................................................................................................14
A. General .............................................................................................................................................................14
B. Audio Setup ......................................................................................................................................................17
C. Dolby Setup ......................................................................................................................................................20
D. Video Setup ......................................................................................................................................................21
E. Preference ........................................................................................................................................................24
Setup examples ...............................................................................................................................................................26
Connection of a television set ..............................................................................................................................26
Connection of a television set using an A/V-cable .........................................................................................26
Connection of an audio system and TV-set using the component outputs ...............................................26
Connection of an amplifier with digital audio input and TV-set....................................................................27
Maintenance ....................................................................................................................................................................27
Troubleshooting ...............................................................................................................................................................27
Product Specifications ....................................................................................................................................................28
Notes ..................................................................................................................................................................................29
Ordercode: D1133
1
DVMP-250
Warning
Unpacking Instructions
Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure
that all parts are present, and have been received in good condition. Notify the dealer immediately and
retain packing material for inspection if any parts appear damaged from shipping or the carton itself
shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be
returned to the factory, it is important that the fixture be returned in the original factory box and packing.
Your shipment includes:
•
DAP DVMP-250
•
User manual
•
IR remote control
Safety Instructions
Every person involved with the installation, operation and maintenance of this system has to:
•
be qualified
•
follow the instructions of this manual
Before the initial start-up, please make sure that there is no damage caused by transportation. Should
there be any, consult your dealer and do not use the system.
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to
follow the safety instructions and warning notes written in this manual.
Please consider that damages caused by manual modifications to the system are not subject to
warranty.
This system contains no user-serviceable parts. Refer servicing to qualified technicians only.
Ordercode: D1133
2
DVMP-250
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual or any unauthorized modification to the system.























Never let the power cord come into contact with other cables! Handle the power-cord and all
connections with the mains with particular caution!
Never remove warning or informative labels from the unit.
Never use anything to cover the ground contact.
Never leave any cables lying around.
Do not insert objects into air vents.
Do not connect this system to a dimmerpack.
Do not switch the system on and off in short intervals, as this would reduce the system’s life.
Do not open the device and do not modify the device.
Do not drive the inputs with a signal level bigger, than required to drive the equipment to full output.
Only use system indoor, avoid contact with water or other liquids.
Avoid flames and do not put close to flammable liquids or gases.
Always disconnect power from the mains, when system is not used. Only handle the power-cord by
the plug. Never pull out the plug by tugging the power-cord.
Make sure you don’t use the wrong kind of cables or defective cables.
Make sure that the available voltage is not higher than stated on the rear panel.
Make sure that the power-cord is never crimped or damaged. Check the system and the powercord from time to time.
Please turn off the power switch, when changing the power cord or signal cable, or select the input
mode switch.
Avoid ground loops! Always be sure to connect the power amps and the mixing console to the
same electrical circuit to ensure the same phase!
If system is dropped or struck, disconnect mains power supply immediately. Have a qualified
engineer inspect for safety before operating.
If the system has been exposed to drastic temperature fluctuation (e.g. after transportation), do not
switch it on immediately. The arising condensation water might damage your system. Leave the
system switched off until it has reached room temperature.
If your Dap Audio device fails to work properly, discontinue use immediately. Pack the unit securely
(preferably in the original packing material), and return it to your Dap Audio dealer for service.
Repairs, servicing and electric connection must be carried out by a qualified technician.
For replacement use fuses of same type and rating only.
WARRANTY: Till one year after date of purchase.
Operating Determinations
This system is not designed for permanent operation. Consistent operation breaks will ensure that the
system will serve you for a long time without defects.
If this system is operated in any other way, than the one described in this manual, the product may suffer
damages and the warranty becomes void.
Any other operation may lead to dangers like short-circuit, burns, electric shock, etc.
You endanger your own safety and the safety of others!
Improper installation can cause serious injuries and damage of property !
Ordercode: D1133
3
DVMP-250
Connection with the mains
Connect the device to the mains with the power-plug.
Always pay attention, that the right color cable is connected to the right place.
International
L
N
EU Cable
BROWN
BLUE
YELLOW/GREEN
UK Cable
RED
BLACK
GREEN
US Cable
YELLOW/COPPER
SILVER
GREEN
Pin
FASE
NULL
EARTH
Make sure that the device is always connected properly to the earth!
Improper installation can cause serious damage to people and property!
Return Procedure
Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.
Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned
without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility.
Call Highlite 0031-455667723 or mail aftersales@highlite.nl and request an RMA prior to shipping the fixture.
Be prepared to provide the model number, serial number and a brief description of the cause for the
return. Be sure to properly pack fixture, any shipping damage resulting from inadequate packaging is the
customer’s responsibility. Highlite reserves the right to use its own discretion to repair or replace
product(s). As a suggestion, proper UPS packing or double-boxing is always a safe method to use.
Note: If you are given an RMA number, please include the following information on a piece of paper
inside the box:
01) Your name
02) Your address
03) Your phone number
04) A brief description of the symptoms
Claims
The client has the obligation to check the delivered goods immediately upon delivery for any shortcomings and/or visible defects, or perform this check after our announcement that the goods are at their
disposal. Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be
reported to the carrier upon receipt of merchandise.
It is the customer's responsibility to notify and submit claims with the shipper in the event that a fixture is
damaged due to shipping. Transportation damage has to be reported to us within one day after receipt
of the delivery.
Any return shipment has to be made post-paid at all times. Return shipments must be accompanied with
a letter defining the reason for return shipment. Non-prepaid return shipments will be refused, unless
agreed otherwise in writing.
Complaints against us must be made known in writing or by fax within 10 working days after receipt of the
invoice. After this period complaints will not be handled anymore.
Complaints will only then be considered if the client has so far complied with all parts of the agreement,
regardless of the agreement of which the obligation is resulting.
Ordercode: D1133
4
DVMP-250
Description of the device
Features
The DAP-audio DVMP-250 is a 2U Karaoke DVD player
•
Supports all common audio/video formats
•
Contains S-Video, TV, Component Video, VGA, HDMI and BNC video outputs
•
Balanced XLR audio outputs
•
19” Rack mounts included
•
Headphones 6,3 mm jack output
•
IR Remote control included
Overview
Fig. 01
Ordercode: D1133
5
DVMP-250
Frontside
Fig. 02
Power switch
R/L button
Display
IR Remote sensor
Disc holder
Source button
LCD Display
Play/pause
Direct access buttons
Eject button
Fast
reverse button
Return button
Fast
forward button
Flat button
Previous
button
button
Time button
Phone input
Sharp button
Level control
Repeat button
SD port
Video button
USB A port
Next
button
Backside
Fig. 03
HDMI out
Digital audio (optical) out
Audio stereo RCA unbalanced out
VGA out
Digital audio RCA (coax) out
Audio stereo XLR balanced out
Composite RCA video out
Video BNC out
Component RCA video out
IEC Power connector 100-240V AC
S-video out
Ordercode: D1133
6
DVMP-250
Remote control
Fig. 04
Source button
Step button
A-B button
Sharp button (key control)
Nor button (key control)
Menu button
N/P button
OK button
Eject button
Cursor right button
Flat button (key control)
R/L button
Cursor up button
Return button
Setup button
Next button
Cursor left button
Previous button
Time button
Video out button
Cursor down button
Prog. Button
Stop button
Vol + button
Play/pause button
Vol – button
Fast reverse button
Zoom button
Fast forward button
Angle button
Repeat button
Clear button
Title button
Mute button
Direct access buttons
Copy button
Slow button
Ordercode: D1133
7
DVMP-250
Names and functions
Below is a description of the functions of the controls.
01) Power switch
This is the main power switch. Press to turn the device on or off.
02) Display
03) Disc holder
Place the disc in the holder. Push the eject (17/40) button to open and close the disc holder.
04) LCD display
05/53) Direct access buttons
Use these buttons to select a track directly. You can also use the 10+ button to move 10 tracks
forward. E.g. if your current track is 5, pushing the +10 button will select track 15.
06/49) Fast reverse
button
Push and hold this button to play a track fast backwards.
07/50) Fast forward
button
Push and hold this button to play a track fast forwards.
08/63) Previous
button
Use this button to go back to the beginning of the current track or select the previous track to be
played.
09) Phone output
You can connect a pair of headphones with an impedance of 32 - 600 Ohm to the headphones
connector. It is a 6,3 mm (1/4”) TRS socket, wired as Tip=left, Ring=right and sleeve = ground.
Caution:
Depending on the type of headphones connected to the Headphones jack, the DVMP-250 is
capable of producing high output levels via the phones output. Therefore, make sure to turn the
control all the way to the left (minimum setting) before connecting the headphones. Be aware of
the fact that listening to loud sound pressure levels over a longer period of time leads to hearingdamage!
10) Level control
This button is used to adjust the volume level of the phone (09) output.
11) SD port
Use this port to connect an SD card.
12) USB port
Use this port to connect a USB flash drive.
13/60) R/L button
This button allows you to assign the DVD/MP3 player’s left channel, right channel or both
(stereo) channels to the main mix.
14) IR remote sensor
15/36) Source button
Tap this button to select SD, USB or Disc as playback source.
16/48) Play/Pause
button
This button allows you to toggle between pause mode and playback mode.
17/40) Eject button
Push this button to open and close the disc holder (03).
18/61) Return
This button allows you to return to the start of the current track.
19/41) Flat button
Every time this button is pushed, the pitch of the current track will decrease by one semi tone.
Total range is +/- 9 semitones.
20/45) Time button
Use this button to switch the TIME indication on the LCD display (04) between the elapsed
time and remaining time. The selected mode is indicated by ELAPSED or REMAIN.
21/56) Sharp button
Every time this button is pushed, the pitch of a current track will increase by one semi tone.
Total range is +/- 9 semitones.
22/51) Repeat button
Use this button to repeat one track or all tracks of the medium.
See the section Repeat on page 11.
Ordercode: D1133
8
DVMP-250
23/64) Video button
Pushing this button allows you to switch between YUV, VGA and S-Video modes.
24/62) Next
button
Use this button to skip to a following track.
25) HDMI out
Connect the input of a HDMI monitor to this output.
26) Audio stereo RCA unbalanced out
Connect an unbalanced line input of your mixer/ amplifier to this output.
27) RCA coax out
Connect a digital audio input of your mixer/amplifier to this output.
28) RCA video out
Connect the video input of your TV-set to this output.
29) Component RCA video out
Connect the composite video input of your TV-set to these outputs.
30) S-Video out
Connect the S-video input of your TV-set to this output.
31) Optical out
Connect an optical (digital) audio input of your mixer/amplifier to this output.
32) VGA out
Connect the input of a VGA monitor to this output.
33) Audio stereo XLR balanced out
Connect a balanced line input of your mixer/ amplifier to this output.
34) Video BNC out
Connect the coax video input of your TV-set to this output.
35) IEC Power connector 100-240V AC
This connector is meant for the connection of the supplied power cord. Connect one end of the
power cord to the connector, the other end to the mains, and turn on the power (01) switch to
operate the unit.
37) A-B button
Push this button once to set the start point (Repeat A will appear on screen). Push again to set the
endpoint of a loop (Repeat B will appear on screen). As soon as the endpoint is set, loop play will
start. Push for the third time to exit loop play.
38) Nor button
This button allows you to return to normal pitch.
39) N/P button
Use this button to select your TV system: PAL/NTSC
42/44/46/59) Arrow buttons
Use these buttons to navigate through the onscreen menus.
43) Setup button
Push this button to open the onscreen setup menu.
47) Stop button
Push this button to stop playback.
52) Title button
Push this button to choose a subtitling language.
54) Slow button
Push this button to play a track at a lower speed.
55) Step button
Push this button to step through your frames one frame at a time.
57) Menu button
Push this button to open the onscreen DVD menu.
58) OK button
Confirm your selection in the onscreen menu by pushing this button.
65) Prog. button
Stop playback and push the PGM button, the player will enter the program mode. For more
information, see the section Program on page 12.
66) Volume + button
Pushing this button allows you to increase the volume level of the audio outputs.
67) Volume – button
Pushing this button allows you to decrease the volume level of the audio outputs.
Ordercode: D1133
9
DVMP-250
68) Zoom button
Pushing this button allows you to change the zoom factor.
69) Angle button
Push this button to change the camera angle. This button is only functional if a DVD has this option.
70) Clear button
Push this button to clear the numbers you just entered by using the direct access (5/33) buttons.
71) Mute button
Push this button to mute the audio outputs.
72) Copy button
Not functional in this version of the software.
Installation
Remove all packing materials from the device. Check that all foam and plastic padding is removed.
Connect all cables.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. The power supply is printed on the back of the device.
Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Connections
01) Turn off the Power (01) switch.
02) Connect the DVMP-250 to your amplifier using the proper cables.
CAUTION: Be sure that the power is off, when connecting the cables.
Installing batteries
01) Remove the cover (73).
02) Insert batteries. Make sure that the terminals correspond to the symbols shown in the presented
drawing.
03) Replace the cover.
Note:
•
The batteries must be placed correctly.
•
Do not recharge, heat, open or short circuit the batteries. Do not throw the batteries into open fire.
•
Do not mix different types or old and new batteries.
•
If the remote control does not work properly, or if the range is reduced, both batteries should be
replaced.
Ordercode: D1133
10
DVMP-250
Operations
01) Preparation
•
When you want to watch a DVD film, turn the TV-set on and select the video input connected to
the DVD player.
•
If you want to listen to audio via your audio installation, turn the audio system on and select the
DVD player input.
02) Normal Playback
•
Push the power (01) switch on the front panel to switch the DVD player on. The start logo appears
on the TV screen. If the disc drive already contains a disc, the playback will start as soon as the
DVD player is switched on.
•
Push the eject (17/40) button to open the disc holder and insert a disc.
•
Push the eject (17/40) button to close the disc holder. Playback will start.
•
Push the play/pause
(16/48) button if the playback does not start automatically.
•
Some discs will start by presenting a menu. Use the cursor (42/44/46/59) buttons to choose between
the different options, then push the OK (58) button. Alternatively, you can select a function directly
by using the direct access (05/53) buttons and confirm your choice by pushing the OK (58) button.
03) Pause
•
Push the play/pause
(16/48) to enter pause mode (still picture). The sound will be muted while in
pause mode.
•
Push the play/pause
(16/48) to resume in playback mode.
04) Stop
•
Push the stop (47) button on the remote control to stop playback. The start logo will appear on
the TV screen. Some discs offer the possibility of resuming from the same spot, e.g. DVDs and music
CDs.
•
Push play/pause
(16/48) to resume playback from where it stopped or from the beginning,
depending on a DVD.
•
Push the stop (47) button twice to stop playback completely.
05) Previous and next
•
During playback, push previous
(08/63) to return to the start of a track. Push previous
(08/63) again to go back to a previous track.
•
Every time you push the next
(24/62) button you will skip to a following track.
06) Fast Forward/Reverse
•
Push F.FWD
(07/50) to play a DVD at a faster speed. The speed changes every time F.FWD
(07/50) is pushed.
•
Push play/pause
(16/48) to return to normal playback speed.
•
Push F.REV
(06/49) play a DVD at a slower speed.
The speed changes every time F.REV
(06/49) is pushed.
•
Push play/pause
(16/48) to return to normal playback speed.
07) Video Mode
•
Push the video (23/64) button to select: YUV, VGA, S-video.
08) Step
•
Push the step (55) button to step forward by a single frame/picture during playback. Push step (55)
several times to step forward several frames/ pictures. Push the play/pause
(16/48) button to
resume playback.
09) Repeat
•
Push the repeat (22/51) button to select between: “repeat off”, “repeat 1 track”, “repeat all”
(a complete DVD/CD).
10) Loop play
•
Push the A-B (37) button to set up the starting point of your loop.
•
Push the A-B (37) button again to set the stop point to complete setup.
•
The section between A and B will be repeated.
•
Push the button for the third time to cancel loop play.
11) Slow
•
Push the slow (54) button to play a disc slowly forwards.
The speed changes every time you push the slow (54) button.
Ordercode: D1133
11
DVMP-250
12) Program
Push prog (65) to open the on screen program menu.
•
•
•
•
•
13)
•
14)
•
•
15)
•
16)
•
17)
•
The DVMP-250 allows you to program up to 16 tracks/chapters.
Use the cursor (42/44/46/59) buttons to navigate through the menu.
Use the direct access (05/53) buttons to insert a desired track/chapter in the selected program
number.
When finished, move to the onscreen play button using the cursor (42/44/46/59) buttons and confirm
the choice by pushing the OK (58) button.
Use the onscreen “clear” button to erase the complete program.
Abort program play by pushing the Stop (47) button twice (pre stop and stop).
Zoom
Push the zoom (68) button to zoom the picture in/out. The size of the picture changes every time
the button is pushed.
Volume and Mute
Push the vol + (66) button to increase the volume level and the vol – (67) button to decrease
the volume level.
Pushing the mute (71) button will mute the audio signal. Push again to cancel the mute function.
Menu
Push this button to open the DVD’s main menu and navigate using the cursor (42/44/46/59) and
OK (58) buttons.
Subtitles
On some DVDs, title menu will appear when pushing the title (52) button.
Angle
Pushing the angle (69) button allows you to choose between different camera angles. This
function only applies to DVDs which are recorded this way.
Ordercode: D1133
12
DVMP-250
Before switching off the power
When you have finished using the DVD player, before switching off the power, be sure that the disc
holder (03) has been closed with the eject (17/40) button.
CAUTION:
•
Do not forcibly close the disc holder when the power is off.
•
Do not switch off the power, when the disc holder (03) is open.
•
Switch off the power after the disc holder (03) has been closed with the eject (17/40) button.
CD/DVDs
01) Precautions on handling CD/DVDs
•
Do not allow fingerprints, oil or dust to get on the surface of a disc. If a disc is dirty, wipe it with a soft
dry cloth.
•
Do not use thinner, water, record spray, electrostatic-proof chemicals, or silicone-treated cloths
to clean discs.
•
Always handle discs carefully to prevent damaging the surface; in particular when removing a
disc from its case or returning it.
•
Do not bend discs.
•
Do not put DVDs near heat sources.
•
Do not enlarge the hole in the center of a disc.
•
Do not write on the label (printed side) with a hard-tipped implement such as pencil or ball point.
•
Condensation will form if a disc is brought into a warm area from a colder one, such as outdoors
in winter. Do not attempt to dry the disc with a hair dryer, etc.
02)
•
•
•
Precaution on storage
After playing a disc, always unload it from the player.
Always store discs in a jewel case to protect from dirt or damage.
Do not place discs in the following areas:
01) Areas exposed to face sunlight for a considerable time.
02) Areas subject to accumulation of dust or high humidity.
03) Areas that are affected by heat from indoor heaters, etc.
Ordercode: D1133
13
DVMP-250
System Setup
When you push the setup (43) button, the setup menu will be displayed. You can select five tabs:
A. General
B. Audio
C. Dolby
D. Video
E. Preference
When you have entered the setup menu you can use the cursor (42/44/46/59) buttons to navigate and
select desired items. When you have selected an item, push the OK (58) button to confirm the entry.
A. General
This menu includes:
01) TV Display
Use the cursor (42/44/46/59) buttons to select the format of the TV which the DVD player is connected
to. You have three options:
•
4:3/PS: Pan & Scan for a normal TV.
•
4:3/LB: Letterbox for a normal TV.
•
16:9: Wide screen for a widescreen TV.
Ordercode: D1133
14
DVMP-250
Note: Available aspect ratios will be printed on the back of a DVD packaging. Some DVDs are recorded
in cinema widescreen format (16:9) and others in standard format (4:3). Some DVDs are recorded in
both formats and may thus feature the Pan Scan function. If available, the Pan Scan function will allow
the 4:3 format to fill out the entire screen. However, a part of the picture will be cut off on both sides.
02) Angle Mark
Use the cursor (42/44/46/59) buttons to switch the Angle Mark function On or Off.
03) OSD Language
This function allows you to select a language for the setup menu and for the screen display.
You can choose between English and Chinese in this software version. Select the language of your
preference, using the cursor (42/44/46/59) buttons and confirm by pushing the OK (58) button.
Ordercode: D1133
15
DVMP-250
04) Captions
Use the cursor (42/44/46/59) buttons to switch the Captions function On or Off.
05) HDCD
Use the cursor (42/44/46/59) buttons to set up the HDCD. Only works with HDCD media.
Depending on the CD sound quality, there are three options which you can choose from:
•
Off:
When this option is selected, you can play normal CDs.
•
1X:
When this option is selected, you can play 44.1K CDs.
•
2X:
When this option is selected, you can play 88.2K CDs.
Ordercode: D1133
16
DVMP-250
B. Audio Setup
Includes:
01) Speaker Setup
Use the cursor (42/44/46/59) buttons to select Speaker Setup and push the OK (58) button to open the
Speaker Setup menu.
The speaker setupmenu gives allows you to adjust the following parameters:
•
•
•
•
Downmix:
LT/RT: A kind of Dolby Pro Logic format. It is used when the unit is connected to a Dolby Pro receiver
through stereo RCA cables.
Stereo: It is used when the unit is connected to a TV through a scart cable or when the unit
is connected to a Dolby Pro Logic II receiver through stereo RCA cables.
V(irtual) Surr(ound)
With this option, the DVMP-250 widens the sound with a conventional two speaker setup.
5.1 CH
Dolby 5.1 sound.
Front Speaker
It allows you to setup your DVMP-250 for either large or small speakers.
Center Speaker
This menu is only accessible if you have selected 5.1 CH mode and allows you to set your system up
for a large or small center speaker or switch the center speaker off.
Rear Speaker
This menu is only accessible if you have selected 5.1 CH mode and allows you to set your system up
for a large or small set of rear speakers or switch the rear speakers off. Use the cursor (42/44/46/59)
buttons to select and change parameters and push the OK (58) button to confirm.
Ordercode: D1133
17
DVMP-250
•
Test Tone
Allows you to generate a test tone.
Use the cursor (42/44/46/59) buttons to select and change parameters and push the OK (58) button
to confirm.
02) Spdif Setup
Use the cursor (42/44/46/59) buttons to select Spdif Setup and push the OK (58) button to open the Spdif
Setup menu.
The Spdif setup page allows you to set up the digital sound format that comes from the coaxial or
optical output on the rear panel. This signal is used when the unit is connected to a digital surround
receiver. You can select:
SPDIF/Off: Closes the digital outputs.
SPDIFF/Raw: Opens digital outputs for the pure, non-modulated digital signal.
SPDIF/Pcm: Stands for Pulse Code Modulation. It may be necessary to activate this function if the digital
surround receiver cannot recognize the sound format. Select the sound format of your preference using
the cursor (42/44/46/59) buttons and confirm by pushing the OK (58) button.
Use the cursor (42/44/46/59) buttons and the OK (58) button to select between Spdif/Raw, Spdif/PCM or
switch Spdif off.
03) Karaoke Setup
The Karaoke setup is not functional on the DVMP-250, as the DVMP-250 has no microphone input.
Ordercode: D1133
18
DVMP-250
04) CH EQ Setup
Use the cursor (42/44/46/59) buttons to select CH EQ Setup and push the OK (58) button to open the
CH EQ Setup menu.
This menu allows you to setup:
•
Preset EQ Type
You can choose between Rock, Pop, Live, Dance, Techno, Classic, Soft or switch the EQ off.
•
Bass Boost
On or off.
•
Super Bass
On or off.
•
Treble Boost
On or off.
Use the cursor (42/44/46/59) buttons to select and change parameters and push the OK (58) button to
confirm.
05) 3D Process
Use the cursor (42/44/46/59) buttons to select 3D Process and push the OK (58) button to open the 3D
Process setup page.
Ordercode: D1133
19
DVMP-250
This menu allows you to setup a preset reverb algorithm. Concert, Living Room, Hall, Bathroom, Cave,
Arena, Church or switch the reverb effect off.
Use the cursor (42/44/46/59) buttons to select and change parameters and push the OK (58) button to
confirm.
C. Dolby Setup
This menu is used for setting up Dolby functions and includes:
01) Dual mono mode
Here you can choose between stereo, left mono channel, right mono channel or mixed mono.
Select the mode of your preference using the cursor (42/44/46/59) buttons and confirm your choice by
pushing the OK (58) button.
Ordercode: D1133
20
DVMP-250
02) Dynamic Range
To avoid disturbing the neighbours at night, you can use this function to reduce the sound effects
volume without changing the original tone. Use the cursor (42/44/46/59) buttons to adjust the dynamic
range between off and full.
D. Video Setup
This menu is used for setting up Video functions and includes:
01) Component
Use the cursor (42/44/46/59) buttons to select:
•
YUV
•
VGA
•
S-Video
Ordercode: D1133
21
DVMP-250
02) TV Mode
Use the cursor (42/44/46/59) buttons to select:
•
•
P-Scan
Interlace
03) Quality
Use the cursor (42/44/46/59) buttons to select Quality and push the OK (58) button to open the Quality
Setup menu.
This menu allows you to setup:
•
Sharpness
Use the cursor (42/44/46/59) buttons to adjust sharpness between Medium, Low and High.
Push the OK (58) button to store.
•
Brightness
Use the cursor (42/44/46/59) buttons to adjust brightness between -20 and +20.
Push the OK (58) button to store.
•
Contrast
Use the cursor (42/44/46/59) buttons to adjust contrast between -16 and +16.
Push the OK (58) button to store.
•
Gamma
Use the cursor (42/44/46/59) buttons to adjust gamma between none, low, medium or high. Push
the OK (58) button to store.
Ordercode: D1133
22
DVMP-250
•
•
•
Hue
Use the cursor (42/44/46/59) buttons to adjust hue between -9 and +9. Push the OK (58) button to
store.
Saturation
Use the cursor (42/44/46/59) buttons to adjust saturation between -9 and +9.
Push the OK (58) button to store.
Luma Delay
Use the cursor (42/44/46/59) buttons to select either 0T or 1T. Push the OK (58) button to store.
04) HDMI
Use the cursor (42/44/46/59) buttons to select HDMI Setup and push the OK (58) button to open the
HDMI Setup menu.
In the HDMI setup menu, you are able to select:
•
HDMI
Switch HDMI On or Off.
•
Resolution
Adjust the resolution. You are able to select: 720P60, 1080160, 1080p(60Hz), 5761, 576P27, 720P50,
1080150 or 1080p(50Hz).
Use the cursor (42/44/46/59) buttons to select and change parameters and push the OK (58) button to
confirm.
Ordercode: D1133
23
DVMP-250
E. Preference
This menu allows you to set up:
01) TV Type
02) Audio
This menu item is not functional in this software version. Use a DVD disc’s menu to setup the language.
03) Subtitle
This menu item is not functional in this software version. Use the title (52) button.
04) Disc Menu
This function allows you to select a language for the setup menu.
You can choose between English, French, Spanish, Chinese, Japanese, Korean, Russian and Thai in this
version. Select the language of your preference using the cursor (42/44/46/59) buttons and confirm your
choice by pushing the OK (58) button.
Ordercode: D1133
24
DVMP-250
05) Parental
Use the cursor (42/44/46/59) buttons to set up a filter to block certain DVDs.
06) Password
Use the cursor (42/44/46/59) buttons to select Password and push the OK (58) button to open the
Password Setup menu.
This menu allows you to set up a password.
07) Default
Use the cursor (42/44/46/59) buttons to select reset. Confirm your selection by pushing the OK (58)
button. Now the DVMP-250’s default settings will be restored.
Ordercode: D1133
25
DVMP-250
Setup examples
Connection of a television set
Connection of a television set using an A/V-cable
If your TV-set has an S-video input, the DVD-player can be connected with an S-video cable. If the TV set
has no S-video input use an A/V cable.
Do not use both cables at the same time!
Connection of an audio system and TV-set using the component outputs
Ordercode: D1133
26
DVMP-250
Connection of an amplifier with digital audio input and TV-set
If the amplifier has a coaxial input, the karaoke player can be connected with a coax cable.
Do not use a coaxial cable and an optical cable at the same time!
Maintenance
The DAP Audio-CD-Player DVMP-250 requires almost no maintenance. However, you should keep the unit
clean. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse
in liquid. Do not use alcohol or solvents.
Keep connections clean. Disconnect electric power, and then wipe the audio connections with a
damp cloth. Make sure connections are thoroughly dry before linking equipment or supplying electric
power.
Troubleshooting
DAP Audio-CD-Player DVMP-250.
This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the
steps below in sequence until a solution is found. Once the unit operates properly, do not carry out
following steps.
01) If the device does not operate properly, unplug the device.
02) Check power from the wall, all cables, connections, etc.
03) If all of the above appears to be O.K., plug the unit in again.
04) If nothing happens after 30 seconds, unplug the device.
05) Return the device to your DAP Audio dealer.
Ordercode: D1133
27
DVMP-250
Product Specifications
Power supply:
Power consumption:
S/N ratio:
Frequency response:
THD:
Audio output:
Analog audio outputs:
Digital audio outputs:
Headphones output:
Video outputs:
Accepted media:
Frequency response:
Dimensions:
Weight:
Remote control batteries:
AC 100V-240V, 50/60 Hz
30 Watt
>85dB
20Hz – 20kHz
<0,01%
XLR 6dBv
RCA 0dB
Unbalanced RCA
Balanced XLR
BNC
Optical
6,3 mm stereo jack
S-Video
TV
Component Video
VGA
HDMI
BNC
DVD, VCD, CD, CDR, MP3, MP4, RM, USB, SD
20Hz – 20kHz
482 x 224 x 89 mm (LxWxH)
19” x 2 HE
2,7 Kg
AAA 2x 1,5V
Design and product specifications are subject to change without prior notice.
Website: www.Dap-audio.info
Email: service@highlite.nl
Ordercode: D1133
28
DVMP-250
Notes
Ordercode: D1133
29
DVMP-250
Ordercode: D1133
30
©2014 DAP Audio