Boss Audio Systems BV7280 User`s manual

(044)361-05-06
ICQ:495-089-192
(067)469-02-12
ICQ:613-211-859
(099)048-99-03
(093)672-77-76
User's Manual
DVD/CD/USB/SD receiver Boss Audio BV7280
In the online store Winauto you also can buy 1din receiver Boss Audio BV7280. Delivery in Kyiv and throughout
Ukraine with payment upon receipt!
winauto.ua
Archive - Audio, video - Sound and Components - Car Safety and security - Car DVRs, cameras, parking - Car Goods - Automotive Lighting Tweak - Car Chemicals and Power Supply - Sale -
Online-store car audio and autogoods Winauto
a
u
.
o
t
u
w
a
in
to
.u
WARNING
a
Online-store car audio and autogoods Winauto
in
au
To ensure safety while driving
and to comply with laws,
w
drivers should not watch video or
operate the video device while driving.
Online-store car audio and autogoods Winauto
BV7280
OWNER’S MANUAL
w
in
au
to
.u
a
Mobile Audio/Video System
y PLL Synthesizer Stereo Radio
y Automatic Memory Storing
y RBDS Operation
y Full Detachable Panel
y Preset Equalization
y Memory Card Interface
y USB Interface
y AV IN interface on the front panel
y Remote Control
1
Online-store car audio and autogoods Winauto
CONTENTS
INSTALLATION.................................................................................. 3
USING THE DETACHABLE FRONT PANEL .................................... 6
CONNECTIONS................................................................................. 7
a
LOCATIONS AND FUNCTION OF THE PLAYER ............................. 8
to
.u
LOCATIONS AND FUNCTION OF THE REMOTE CONTROL ......... 9
OPERATION ...................................................................................... 11
in
au
BASIC OPERATION......................................................................................... 12
USB PLAY OPERATION .................................................................................. 13
MEMORY CARD OPERATION......................................................................... 16
w
RADIO OPERATION ........................................................................................ 17
AV IN OPERATION........................................................................................... 18
TROUBLE SHOOTING...................................................................... 19
SPECIFICATIONS ............................................................................. 20
2
Online-store car audio and autogoods Winauto
INSTALLATION
Notes:
y Choose the mounting location where
the unit will not interfere with the normal
driving function of the driver.
y Before finally installing the unit, connect
the wiring temporarily and make sure it
is all connected up properly and the
unit and the system work properly.
y Use only the p arts included with the
unit to ensure proper inst allation. The
use of unauthorized p arts can cause
malfunctions.
y Consult with your nearest dealer if
installation requires the drilling of holes
or other modifications of the vehicle.
y Install the unit wher e it does not get in
the driver’s way and cannot injure the
passenger if there is a sudden stop, like
an emergency stop.
y Avoid installing the unit where it would
be subject to high temperature, such as
from direct sunlight, or hot air, from the
heater, or where it would be subject to
dust, dirt or excessive vibration.
w
in
au
to
.u
a
Installing the unit
Be sure you test all connections first, and
then follow these steps to install the unit.
1. Make sure the ignition is turned of f, and
then disconnect the cable from the
vehicle battery’s negative (-) terminal.
2. Disconnect the wire harness and the
antenna.
3. Press the release button on the front
panel and remove the control p
anel
(see the step s of “To detach the front
panel”).
4. Lift the top of the outer trim ring then pull
it out to remove it.
5. The two supplied keys release t
abs
inside the unit’ s sleeve so you can
remove it. Insert the keys as far as they
will go (with the notches facing up) into
the appropriate slot s at the middle lef t
and right sides of the unit. Then slide
the sleeve off the back of the unit.
DIN FRONT/REAR-MOUNT
This unit be can properly installed either
from “Front” (conventional DIN Front-mount)
or “Rear”(DIN Rear-mount installation,
utilizing threaded screw holes at the sides
of the unit chassis). For details, refer to the
following illustrated installation methods.
(1) Front panel; (2) Outer trim ring;
(3) Sleeve; (4) L key; (5) R key
6. Mount the sleeve by inserting it into the
opening of the dashboard and bend
open the tabs located around the sleeve
with a screwdriver . Not all t abs will be
able to make contact, so examine which
ones will be most ef fective. Bending
open the appropriate tabs behind the
dashboard to secure the sleeve in
place.
DIN FRONT-MOUNT (Method A)
Installation Opening
This unit can be inst alled in any dashboard
having an opening as shown below:
3
Online-store car audio and autogoods Winauto
INSTALLATION
(1) Metal Strap; (2) Mounting Bolt;
(3) Hex Nut; (4) Spring Washer;
(5) Tapping Screw; (6) Plain Washer
10. Reconnect the cable to the vehicle
battery’s negative (-) terminal. Then
replace the outer trim ring and install the
unit’s front panel (see the steps of “To
Install the front panel”).
(1) Dashboard
(2) Tabs
7. Reconnect the wire harness and the
antenna and be careful not to pinch any
wires or cables.
8. Slide the unit into the sleeve until it
locks into place.
9. To further secure the unit, use the
supplied metal strap to secure the back
of the unit in place. Use the supplied
hardware (Hex Nut (M5mm) and Spring
Washer) to attach one end of the strap
to the mounting bolt on the back of the
unit. If necessary, bend the metal strap
to fit your vehicle’s mounting area. Then
use the supplied hardware (Tapping
Screw and Plain Washer) to attach the
other end of metal strap to a solid metal
part of the vehicle under the dashboard.
This strap also helps ensure proper
electrical grounding of the unit.
Note to install the short threading
terminal of the mounting bolt to the back
of the unit and the other long threading
terminal to the dashboard.
Removing the unit
w
in
au
to
.u
a
1. Make sure the ignition is turned of f, then
disconnect the cable from the vehicle
battery’s negative (-) terminal.
2. Remove the met al strap att ached the
back of the unit (if attached).
3. Press the release but ton to remove the
front panel.
4. Lift the top of the outer trim ring then pull
it out to remove it.
5. Insert both of the supplied keys into the
slots at the middle lef t and right sides of
the unit, then pull t he unit out of the
dashboard.
DIN REAR-MOUNT (Method B)
If your vehicle is a Nissan, T oyota, follow
these mounting instructions.
Use the screw holes marked T (Toyota), N
(Nissan) located on both sides of the unit to
fasten the unit to the factory radio mounting
brackets supplied with your vehicle.
4
Online-store car audio and autogoods Winauto
INSTALLATION
Side View showing
Screw Holes marked
T, N or S
Screw
Factory Radio
Mounting Bracket
Screw
to
.u
a
Dashboard or Console
w
in
au
To fasten the unit to the factory radio
mounting brackets.
Align the screw holes on the bracket with
the screw holes on the unit, and then
tighten the screws (5x5mm) on each side.
Note: The outer trim ring, sleev e and the
metal strap are not used for method B
installation.
5
Online-store car audio and autogoods Winauto
USING THE DETACHABLE FRONT PANEL
Precautions when handling
1. Do not drop the control panel.
2. Do not put pressure on the display or
control buttons when detaching or
re-installing the control panel.
3. Do not touch the contacts on the
control panel or on the main unit body.
It may result in poor electrical contact.
4. If any dirt or foreign substances
adhered on the contacts, they can be
removed with a clean and dry cloth.
5. Do not expose the control panel to high
temperatures or direct sunlight in
anywhere.
6. Keep away any volatile agents (e.g.
benzene, thinner, or insecticides) from
touching the surface of the control
panel
7. Do not attempt to disassemble the
control panel.
w
in
au
2. Keep the control panel into the case.
to
.u
a
To Detach the Front panel
1. Press the release button on the left-top of
the panel and pull off the control panel.
To Install the Front Panel
To install the control panel, insert the panel
into the housing and make sure the panel
is
properly inst
alled.
Otherwise,
abnormality occurs on the display or some
keys will not function properly.
6
Online-store car audio and autogoods Winauto
w
in
au
to
.u
a
WIRING CONNECTION
Connector A
1. N.C.
2. BRAKE (PINK)
3. REAR VIEW (BROWN)
4. MEMORY +12V (YELLOW)
5. AUTO ANTENNA OUTPUT (BLUE)
6. N.C.
7. +12V (TO IGNITION KEY) (RED)
8. GROUND (BLACK)
Connector B
1. REAR RIGHT SPEAKER (+) (VIOLET)
2. REAR RIGHT SPEAKER (-) (VIOLET/BLACK)
3. FRONT RIGHT SPEAKER (+) (GRAY)
4. FRONT RIGHT SPEAKER (-) (GRAY/BLACK)
5. FRONT LEFT SPEAKER (+) (WHITE)
6. FRONT LEFT SPEAKER (-) (WHITE/BLACK)
7. REAR LEFT SPEAKER (+) (GREEN)
8. REAR LEFT SPEAKER (-) (GREEN/BLACK)
7
Online-store car audio and autogoods Winauto
OPERATION
LOCATION OF KEYS
w
in
au
to
.u
a
Open the cover
1.
12. BND/AMS
(Release button)
13. EQ/TA
2. Volume knob (when rotated)
14.
Push SEL (when pressed)
3. PTY/AF
15.
4. 3.2 inch TFT display
16. MODE
5. 1
17. CLOCK
6. 2
18. USB/SD cover
7. 3 OSD
19. USB interface
8. 4 RPT
20. Memory card interface
9. 5 RDM
21. Remote Sensor
10. 6 SUB-T
22. AV IN jack
11.
23. Reset button
/MUT
8
Online-store car audio and autogoods Winauto
w
in
au
to
.u
a
LOCATIONS AND FUNCTION OF THE REMOTE CONTROL
9
Online-store car audio and autogoods Winauto
LOCATIONS AND FUNCTION OF THE REMOTE CONTROL
In audio file play mode, press to play all
tracks in random order.
10. VOL+/VOLPress to increase/decrease the volume
level.
11. AUDIO
In video play mode, press shortly to
display the audio information of the file.
In video play mode, press and hold it to
enter into EQ setting, such as POP,
CLAS, ROCK and OFF. In radio mode,
pressing the button is EQ function.
1.
to
.u
/
In USB/SD mode, press it once to
pre-stop play, press it twice to stop the
play and return to the logo.
7. AMS/RPT
In radio mode, press to activate auto
seek/preset store function.
In media play mode, press to switch
the repeat mode of programs.
8. ST/PROG
In media play mode, press to enter into
program mode to play the track in your
desired sequence.
In radio mode press to set the
reception between mono mode or
stereo mode.
9. LOC/RDM
In radio mode, press it to select between
local and distant stations.
w
6.
12. OSD
In media play mode, press to display
OSD (the on-screen display) information.
13. 0-9
Numeric buttons.
14.
Press to play/pause the playback.
15. MUTE
Press to mute the sound, press it again
to resume the sound.
16. 10+
Digital selecting button for track,
cooperatively used with numeric
buttons.
in
au
In video play mode, press to change the
TV system between AUTO, NSTC and
PAL.
4.
/
,
/
In case of menu mode, the buttons
served as cursor buttons to select item
left/right, up/down.
5. ENTER
Press to confirm your selection.
a
Press it to turn on the unit. When the unit
is on, press it to turn the unit off.
2. MODE
When the unit is on, press it to select the
different mode, such as RADIO, USB,
SD, AV IN mode.
3. BAND/SYS
In radio mode, press it shortly to select
the desired band, such as FM1, FM2,
FM3, AM1 and AM2.
17. SUB-T
Press to display the subtitle information
of the video file.
18. SETUP
In media play mode, press to enter into
the setup menu.
19. GO TO
“GO TO” (Search button) used in
media play mode, cooperatively
used with numeric buttons.
20. SLOW
For some video files, press to start slow
forward function.
10
Online-store car audio and autogoods Winauto
LOCATIONS AND FUNCTION OF THE REMOTE CONTROL
in
au
to
.u
a
21. ZOOM
Press to allow the picture to be increased
in size.
22. SELECT
Press to enter into the system setup
menu.
23. SEEK/ SEEK+
Press shortly to skip to the previous/next
track.
Press and hold it to activate fast
reverse/forward function.
In radio mode, press it shortly to search
the frequency backward/forward
manually. Press and hold it to seek the
frequency automatically.
Preparing the Remote Control
w
Inserting the Batteries
1. Open the battery compartment cover.
2. Insert the new batteries. Make sure that
the positive and negative terminals of the
batteries are oriented as indicated.
3. Close the cover.
y
Battery: One button cell lithium
battery (CR2025).
Using the Remote Control
Point the remo te control towards the
remote control signal receiver on the player
front face.
Operation angle: About ±30 degree in each
the direction of the front of the remote
sensor.
11
Online-store car audio and autogoods Winauto
OPERATION
BASIC OPERATION
◆ Turn the unit on/off
BRIGHTNESS
CONTRAST
SHARTPNESS
COLOR
HUE
RESET
When all the connection is finished,
press MUT button on the front panel or
on the remote control will turn the unit
on. When the unit is on, hold press
MUT button or press
to turn the unit
off.
Then press
/
buttons on the front
panel or on the remote control to select
the item up or down, then use the volume
knob on the front p
anel or VOL+/buttons on the remote control to adjust
the Brightness, Contrast, Sharpness,
Color and Hue.
◆ Faceplate release
on the
Press the release button
front panel to release the front panel.
◆ System menu
to
.u
There is a remote sensor on the front
panel. You can point the remote control
to the remote sensor and press functions
keys on the remote control to control the
unit.
◆ Reset function
Press the
button on the front panel
to fold down the panel, then you will see
the RST button on the housing of the
unit.
It must be activated with either a ballpoint
pen or thin metal object. The reset button
is to be activated for the following
reasons:
1.Initial installation of the unit when all
wiring is completed.
2.All the function buttons do not work.
3. Error symbol on the display.
◆ Volume level adjustment
Rotating the volume knob on the front
panel clockwise or anticlockwise or
pressing VOL+/- buttons on the remote
control to adjust the volume level.
When you adjust the volume the current
value of the volume will be displayed on
the screen.
in
au
0
0
L= R
F= R
00:05
OFF
OFF
ON
35
OFF
◆ Remote sensor
w
BASS
TREB
BALA
FADE
TIME
TIME
SUBWOOF
STEREO
TAVOL
REG
a
Press the volume button on the front
panel of the unit or SELECT button on
the remote control to enter into the setup
menu.
Then press
/
buttons on the front
panel or on the remote control to select
the item up or down, then use the volume
knob on the front p
anel or VOL+/buttons on the remote control to adjust
the selected item.
* TIME --- ON or OFF
When TIME OFF, the CLOCK
will disappear.
* STEREO --- ON or MONO
* REG --- ON or OFF
* SUBWOOF --- ON or OFF
The subwoofer output jack is on the
back of the unit.
NOTE: In video play mode, press the
SELECT button, you can see another
more interface:
12
Online-store car audio and autogoods Winauto
OPERATION
Pressing MUT button on the front
panel or MUTE button on the remote
control will mute the sound. Press it
again will resume the sound.
function and some dat a will n ever lose
even when power's off. You can press the
numerical button 1, 3, 6 on the front panel
of the unit in succession then hold press
4 button to clear the power-down memory
function and “EEP INNT” will appear.
◆ Mode selection
Press MODE button on the front panel or
MODE on the remote control to
select the desired mode to enjoy. Such
as Radio, USB, SD, AV IN mode.
USB PLAY OPERATION
On the front of the unit, when you open the
USB cover, you will see an USB interface.
An USB device can be connected through
this interface.
When you connect an USB device through
the interface, the unit will search the
audio/video/photo files in the USB driver
and start to play automatically.
If in other mode, you can also press MODE
button to select USB mode.
NOTE:
- When in USB play mode, be sure not to
remove the USB driver from the USB
interface.
When stop USB play , you can remove
the USB drive, af ter remove USB driver
from the unit.
- When connecting an MP3 player and
there has normal battery in the player
(non rechargeable ba ttery), you should
remove the battery from the MP3 player
then connect it to the USB interface.
Otherwise, it may cause battery burst.
in
au
to
.u
a
◆ Equalization
In radio mode, press AUDIO button on
the remote control or shortl
y press
EQ/TA button on the front p anel to turn
on equalization function and to select
desired audio mode, such as POP, CLAS,
ROCK, JAZZ and OFF.
In media play mode, press and hold the
button is EQ function.
◆ Brake function
w
◆ Clock display
Repeatedly press CLOCK button on the
front panel to let the clock appear on the
screen or not.
If the brake wire (pink wire) isn’t
connected to the ground (when driving),
the picture will not be shown on the
screen in video play mode for safety
purpose. Only the audio will be heard.
Note: Only when p arking, the video
picture can be seen on the screen. When
driving, the warning information will b e
displayed.
◆ Stopping playback
Press
button on the front p anel or
on the remote control for one time to
pre-stop the playback. When
button on the front panel or on
the remote control is pressed, normal
playback will continue.
Press
or
button twice to stop
the playback completely.
◆ Rearview function
On the back of the unit, there is a yellow
jack for rearview video in. When backing
a car, the picture of the screen will switch
to rearview picture automatically and the
unit will play the video information that
inputted from the yellow rearview video in
jack.
◆ Pausing play
Shortly press
on the front panel or
on the remote control during
playback to stop playback temporarily.
◆ Power-down memory function
The unit has the power-down memory
13
Online-store car audio and autogoods Winauto
OPERATION
Shortly press
again will return to the
normal playback.
◆ Multi-subtitle language function (For
Video file)
Press SUB-T button on the remote
control or SUB-T button on the front
panel during playback. The
corresponding information will be shown
on the screen.
Each time the button is pressed, the
subtitle language changes in the
sequential order.
Note: The language is different according
to the video file. Some files only cont ain
one subtitle language.
◆ Audio function
Press AUDIO during playback to change
the audio channel among STEREO,
MONO L, MONO R, MIX MONO.
◆ Rapid forward / rapid reverse
Hold press
/
on the front panel
or hold press
/
on the remote
control during playback.
Each time the button is hold pressed, the
speed of rapid forwar d /reverse changes
as follows.
Normal play
X2
X4
X8
X20
to
.u
a
◆ Slow motion playback (for Video file
only)
Press SLOW on the remote control during
play. Each time the button is pressed, the
speed of slow forwar d (SF) changes as
follows.
in
au
◆Repeat play
Press RPT button on the remote control
or on the front panel repeatedly to select
different repeat mode.
Normal playÆ 1/2Æ 1/3Æ 1/4Æ 1/5 Æ1/6 Æ 1/7
In slow motion state, shortly press
on
the remote control or
on the front
panel to resume the normal playback.
◆ Skipping track
Pressing
/
buttons on the remote
control or
/
on the front panel during
playback will skip to the next/previous
track.
Note you can use the numeric buttons
(0-9) and 10+ button on the remote control
to select the track directly.
REP:[OFF]
REP:[REP 1]
REP:[REP
DIR]
REP:[REP ALL]
w
◆ Play the tracks in random order
For audio files, when playing, press RDM
button on the front panel or on the
remote control will play the tracks in
random order. In random on mode, press
RDM button again will exit random
playing.
◆ Program play
In program play mode, you can play
the track/photo in your desired
sequence.
For audio/photo files:
a) Press PROG button on the remote
control to enter the program edit
interface.
◆ Zoom function
Allows the picture to be increased in size.
Press ZOOM button on the
remote control to toggle scale among 1,
2, 3, 4, 1/2 , 1/3, and 1/4. When the
scale is 1/4, press ZOOM again will e xit
zoom operation.
During zoom mode, press
/
,
/
buttons to move the picture lef t/right,
up/down.
14
Online-store car audio and autogoods Winauto
OPERATION
1) SYSTEM SETUP
When you open the setup menu, you
will see the system se tup page at first,
see below:
b) Press
/
,
/
cursor
buttons on the remote control to
select the items you want to program.
The items you selected will bec ome
highlight.
c) Input the number you want to
program by numeric buttons (0-9)
on the remote control.
Use cursor buttons to select
PLAY on the bottom of the
screen, or press ENTER button on
remote control to confirm. And
the unit will play the tracks you
programmed.
d) If you want to clear the program,
select CLEAR on the screen and
press ENTER on the remote control
to confirm, and the unit will cancel
the programmed play.
◆ Goto Function
Press GO TO button on the remote control,
then use the numeric bu ttons to input the
desired Track or Time and press ENTER
to confirm. It will pla y the corresponding
program you just set.
SYSTEM SETUP
TV SYSTEM
AUTO PLAY
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
w
in
au
to
.u
a
* TV SYST EM: Change the TV SYSTEM
among NTSC, PAL and AUTO.
* AUTO PLAY: Change betwee n ON and
OFF. When AUTO PLAY ON, the unit will
skip over the menu to play automatically.
* VIDEO: Change among S-VIDEO
INTERLACE-YUV, TV-RGB, P-SCAN
YPBPR and PC-VGA.
* TV TYPE: Change the TV T YPE among
4:3 PS, 4:3 LB and 16:9.
* PASSWORD: Change the PASSWORD
lock or unlock, the default P ASSWORD
is “0000”.
* RATING: Change the p arental RATING
among 1KID SAFE, 2G , 3PG, 4PG13,
5PG-R, 6R, 7NC-17, 8ADULT.
* DEFAULT: Restore the system setup to
the default setup.
◆ Setup Menu
In media play mode, press SETUP button
on the remote control to enter setup
menu.
a) When the cursor is on the topside, use
/
buttons to move between the
different pages, such as SYSTEM
SETUP, LANGUAGE SETUP, AUDIO
SETUP, VIDEO SETUP, SPEAKER
SETUP and DIGITAL SETUP.
b) Press
button to move the cursor
to the setup page below and then
you can use
/
buttons to move
between the different setup options.
button to display the choice
c) Press
list for each setup option and then use
/
buttons and ENTER button to
change your selection.
2) LANGUAGE SETUP
When you open the languag e setup
menu, you will see the langua ge setup
page:
LANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
* You can change the OSD LANGUAGE,
AUDIO LANGUAGE, SUBTITLE
LANGUAGE, MENU LANGUAGE among
different languages.
The language options
are dif ferent
depending on your country or region.
15
Online-store car audio and autogoods Winauto
OPERATION
3) AUDIO SETUP
When you open the AUDIO menu,
you will see the following picture:
DIGITAL SETUP
OP MODE
DYNAMIC RANGE
DUAL MONO
AUDIO SETUP
AUDIO OUT
KEY
* OP MODE: to set the operating
modes for Dolby Digital decoder,
there are LINE OUT and RF REMOD
to be selected.
* DYNAMIC RANGE: you can adjust
the dynamic range between OFF, 1/8,
2/8. 3/8, 1/2, 5/8, 3/4, 7/8, full.
* DUAL MONO: there are STEREO,
MONO L, MONO R and MIX MONO
to be selected.
to
.u
a
*AUDIO OUT: Change among SPDIF/OFF,
SPDIF/RAW and SPDIF/PCM.
* KEY: Change the tone within a cert ain
range.
4) VIDEO SETUP
When you open the VIDEO menu, you
will see the following picture:
in
au
VIDEO SETUP
BRIGHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
Note: The displayed se tting information is
different according to different version.
◆ On-screen Display Function
Press the OSD button on the remote
control or on the unit during playback to
display the console information of the
current file on the screen, such as the
remaining time and the played time.
w
You can adjust the value of the
brightness, contrast, hue, saturation
and sharpness.
5) SPEAKER SETUP
When you open the SPEAKER menu,
you will see the following picture:
◆ Last Play Memory
1) During media play back, if you turn of f
the unit and then turn on the unit again,
the unit will resume playing from the point
that just interrupted.
SPEAKER SETUP
DOWNMIX
FRONT
2) During playback, if you press MODE
button to switch to other mode, then
return to media play mode again, the unit
will resume playing from the point that
just interrupted.
* DOWNMIX: to set the DOWNMIX
modes of LT/RT and STEREO.
* FRONT: to select between LARGE
and SMALL.
6) DIGITAL SETUP
When you open the DIGITAL menu,
you will see the following picture:
MEMORY CARD OPERATION
On the front of the unit, when you open the
USB cover, you will see a memory card
interface. You can insert a memory card
into the interface.
When you insert a memory card in the
memory interface, the unit will search
16
Online-store car audio and autogoods Winauto
OPERATION
FM3, AM1 and AM2 band. The operation
is as below:
1) Store in Memory
Press and hold desired radio preset
buttons (numeric buttons 1~6) on the
remote control or on the front p anel for
several seconds, the memory icon will
be shown display and the current
listening station will be stored into the
number button.
2) Retrieve a Preset Station
Press any one of the
radio preset
buttons (numeric but tons 1~6) on the
remote control or on the front p anel to
retrieve a station which had been stored
in the memory in advance and the
chosen frequency will be shown on
display.
the audio/video/photo files in the card and
start to play automatically. The operation is
the same with the USB operation described
above.
If in other mode, you can also press MODE
button to select Card mode.
The corresponding operation please refer
to the USB PLAY OPERATION.
RADIO OPERATION
◆ Switching to Radio Mode
ST
BAND
:
STATION:
MHZ
POP
◆ Automatic memory storing &
program scanning
in
au
87.50
to
.u
RADIO
a
Press MODE button on remote control or
MODE on the front panel start radio mode.
The band/frequency/station/clock and
other information will display on the
display.
1) Program scanning
FM1
M1
00:03
Shortly press AMS button on remote
control to scan preset station.
2) Automatic memory storing
Press and hold press AMS button on
the remote control or BND/AMS
button on the front p anel for about
several seconds, the radio searches
from the current frequency and checks
the signal strength until one cycle
search is finished. And then st ations
are stored into the preset number
button in turn according to the strength
of the st ations. When auto search is
finished, it will e nter into preset scan
mode automatically.
Note: Press and hold 1-6 numeric
buttons on the remote control for about
several seconds, will store the current
station to the current numeric key
position.
w
◆ Selecting the Frequency Band
Press BND button on the remote control
or BAND/AMS button on the front
panel to select desired band. The
reception band will change in the following
order:
ÆFM1Æ FM 2Æ FM3 Æ
AM1 Æ AM2
◆ Selecting Station
/
buttons on the remote
Press
control or press
/
on the front panel
shortly to adjust the frequency manually.
Hold Press
/
on the remote control
or hold press
/
on the front panel for
fast tuning. The frequency is updated
correspondingly on display.
◆ Setting Memory
◆ Mono/Stereo
Press ST button on remote control to
select mono or stereo mode. Y ou can
sometimes improve reception of distant
stations by selecting mono operation.
Press radio preset buttons (numeric
buttons 1~6) on remote control or on the
front panel to preset stations at radio
mode. Each band can store six preset
stations. The stations might be FM1, FM2,
17
Online-store car audio and autogoods Winauto
OPERATION
AV IN OPERATION
◆ Local/Distant
Press LOC button on the remote control to
select between local and distant stations.
Local setting for reception of strong
station, and a distant setting for reception
of weaker stations.
On the front panel of the unit, there is an
AV IN jack. When you connected the
audio/video device from the jack, press
MODE button on the remote control or
MODE on the front panel to select AV IN
mode.
◆ RBDS OPERATION
to
.u
a
1) In FM mode, hold press TA button on
the front panel to switch TA on or of f.
When TA on, the unit will s
earch
Traffic Announcement automatically.
When received a Traffic
Announcement station, the unit will
change to the Traffic Announcement
station automatically. Hold press TA
again to exit TA mode.
2) Using PTY to Select Program
in
au
Press PTY/AF button on the front panel
to start the station search.
w
Use VOL+/- buttons on the remote
control or volume knob on the front
panel to change the items, when you
choose the desired items.
When PTY is selected, the radio st arts
to
search corresponding PT
Y
information,
and stop s
if the
corresponding PTY information is
detected.
If corresponding PTY information is not
existed any more, PTY engaging is
automatically exit to normal mode.
NOTE: When you set AREA EUR, hold
pressing PTY/AF button can switch on or
off RDS mode.
◆ Switching Area USA/EUR
In radio mode, press and hold the
volume button on the front p anel of the
unit or SELECT button on the remote
control, then you can use the volume
knob on the unit or VOL+/- buttons on
the remote control to set AREA USA or
AREA EUR frequency spacing.
18
Online-store car audio and autogoods Winauto
TROUBLE SHOOTING
If it appears that your unit is faulty, first
consult this checklist. It may be that
something simple has been overlooked.
Nothing happens when the button are
pressed.
¾ An optional unit required to listen to
each source is not connected yet.
„ Connect the optional unit correctly.
¾ The computer chip in the unit is not
functioning normally.
„ Press the reset button on the
housing of the unit.
The sound quality is poor or distorted.
¾ One of the speaker wires is being
pinched by a screw in the car.
„ Check the speaker wiring.
¾ The speakers are not wired correctly.
„ Reconnect the speaker wires so
that each output terminal is
connected to a different speaker.
Radio reception is poor.
¾ The car antenna is not extended.
„ Pull the antenna out all the way.
¾ The antenna control wire is not
connected.
„ Connect the wire correctly.
A track will not play.
¾ Random play has been selected.
„ Turn off random play.
Under no circumstances should you try
to repair the player yourself, as this will
invalidate the warranty. Only qualified
service personnel can remove the cover
or service this player.
w
in
au
to
.u
a
The power does not turn on.
¾ The lead wires are not connected
properly to the connectors.
„ Make sure the connection is
correct.
¾ The fuse has blown.
„ After checking for short circuits in
the wires, replace the fuse with one
having the same rating.
¾ The internal processor is not working
due to noise or other factors.
„ Press the reset button to reset the
unit to factory defaults.
The remote control does not work. The
unit does not operate even when the
correct buttons on the remote control
are pressed.
¾ Battery capacity is low.
„ Install new batteries.
¾ Some operations are disabled in
specific states.
„ Enter the correct mode.
The file can not play.
¾ The file is not supported by the unit.
„ Examine the file format.
The desired source is not selected
although you press the MODE button.
¾ An optional unit required to listen to
each source is not connected yet.
„ Connect the optional unit correctly.
¾ The reset button is not pressed yet
although the optional unit has been
connected to the unit.
„ Press the reset button.
19
Online-store car audio and autogoods Winauto
SPECIFICATION
GENERAL
Power Supply Requirements
Maximum Output Power
Current Drain
Monitor Screen Size
:
DC 12 Volts, Negative Ground
: 4x80 watts
: 15 Ampere (max.)
: 3.2” TFT
RADIO
to
.u
a
FM
Frequency Coverage
87.5 to 107.9 MHz (USA)
87.5 to 108 MHz (Europe/Asia)
Sensitivity (S/N=30dB) 10 dBu
Image Rejection
>45dB
Stereo Separation
>25dB
in
au
AM
Frequency Coverage
530 to 1710 KHz (USA)
522 to 1620 KHz (Europe/Asia)
Sensitivity (S/N=20dB) 36 dBu
Image Rejection
>45 dB
w
SUPPORTED FILE TYPE
VIDEO:
MPEG1, MPEG2, MPEG4, VOB, AVI, XVID, DAT, 3GP
AUDIO:
MP3, ID3, WMA
PHOTO:
JPEG
Note:
Specifications and design are subject to modification, without notice, due to
improvements in technology.
20