M580.book Page A Monday, April 18, 2011 11:18 AM
User Guide
www.sprint.com
©2011Sprint. SPRINT and the logo are trademarks of Sprint.
Other marks are the property of their respective owners.
4/18/11
M580.book Page B Monday, April 18, 2011 11:18 AM
Consejo: Para encontrar esta guía para usuarios en español,
por favor visita a www.sprint.com y haz clic en
Support > Phones & Devices.
To find this user guide in Spanish, please visit
www.sprint.com and click Support > Phones &
Devices.
Important Privacy Message – Sprint’s policies often do not
apply to third-party applications. Third-party applications may
access your personal information or require Sprint to disclose
your customer information to the third-party application
provider. To find out how a third-party application will collect,
access, use, or disclose your personal information, check the
application provider’s policies, which can usually be found on
their website. If you aren’t comfortable with the third-party
application’s policies, don’t use the application.
Open Source Software – Some software components of this
product incorporate source code covered under GNU General
Public License (GPL), GNU Lesser General Public License
(LGPL), OpenSSL License, BSD License and other open
source licenses. To obtain the source code covered under the
open source licenses, please visit:
http://opensource.samsungmobile.com/index.jsp.
SPH-M580_UG_EC30_LH_041811_F10
M580.book Page C Monday, April 18, 2011 11:18 AM
Table of Contents
Tip: Looking for something? If you don’t see it in the headings
listed here, try the Index on page 205.
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i
Your Device’s Menu . . . . . . . . . . . . . . . . . . . . . . . . i
Section 1: Getting Started . . . . . . . . . . . . . . . . . 1
1A. Setting Up Service . . . . . . . . . . . . . . . . . . . 2
Setting Up Your Device . . . . . . . . . . . . . . . . . . . . . .
Activating Your Device . . . . . . . . . . . . . . . . . . . . . .
Setting Up Your Voicemail . . . . . . . . . . . . . . . . . . .
Sprint Account Passwords . . . . . . . . . . . . . . . . . . .
Getting Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2
4
6
7
8
Section 2: Your Phone . . . . . . . . . . . . . . . . . . . 11
2A. Device Basics . . . . . . . . . . . . . . . . . . . . . . 12
Your Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Viewing the Display Screen . . . . . . . . . . . . . . . . .
Turning Your Device On and Off . . . . . . . . . . . . .
Battery and Charger . . . . . . . . . . . . . . . . . . . . . . .
Device Function Keys . . . . . . . . . . . . . . . . . . . . . .
13
17
20
20
24
Navigation and Customization . . . . . . . . . . . . . .
Displaying Your Phone Number . . . . . . . . . . . . .
Making and Answering Calls . . . . . . . . . . . . . . .
In-Call Options . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Entering Text with the Onscreen Keyboard . . . .
Entering Text using the QWERTY Keyboard . .
Creating a Google Account . . . . . . . . . . . . . . . .
27
41
41
45
49
52
56
2B. Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Sound Settings . . . . . . . . . . . . . . . . . . . . . . . . . . .
Display Settings . . . . . . . . . . . . . . . . . . . . . . . . . . .
Language Settings . . . . . . . . . . . . . . . . . . . . . . . .
Location Settings . . . . . . . . . . . . . . . . . . . . . . . . . .
Synchronizing Accounts . . . . . . . . . . . . . . . . . . .
Search Settings . . . . . . . . . . . . . . . . . . . . . . . . . . .
Messaging Settings . . . . . . . . . . . . . . . . . . . . . . .
Call Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Airplane Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TTY Use With Sprint Service . . . . . . . . . . . . . . . .
Security Settings . . . . . . . . . . . . . . . . . . . . . . . . . .
58
61
63
63
64
67
68
69
69
70
71
2C. Call Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Viewing Call Log . . . . . . . . . . . . . . . . . . . . . . . . . . 78
M580.book Page D Monday, April 18, 2011 11:18 AM
Call Log Options . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Checking a Missed Call . . . . . . . . . . . . . . . . . . . . 81
Making a Call From Call Log . . . . . . . . . . . . . . . . 81
Saving a Number From Call Log . . . . . . . . . . . . 82
Altering a Number From Call Log . . . . . . . . . . . 82
Editing a Number From Call Log . . . . . . . . . . . . 83
Erasing the Call Log . . . . . . . . . . . . . . . . . . . . . . . 83
2D. Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Creating a New Contacts Entry . . . . . . . . . . . . . 84
Saving a Phone Number . . . . . . . . . . . . . . . . . . 86
Confirming Contact Synchronization . . . . . . . . . 87
Contacts Menu Options . . . . . . . . . . . . . . . . . . . 88
Contacts Entry Options . . . . . . . . . . . . . . . . . . . . 89
Editing a Contacts Entry . . . . . . . . . . . . . . . . . . . 89
Adding a Number to a Contacts Entry . . . . . . . 90
Editing a Contacts Entry’s Number . . . . . . . . . . 90
Selecting a Ringer Type for an Entry . . . . . . . . 90
Assigning a Picture to an Entry . . . . . . . . . . . . . . 91
Deleting Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Adding Entries to Your Favorites . . . . . . . . . . . . 92
2E. Calendar & Tools . . . . . . . . . . . . . . . . . . . 93
Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
My Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Updating Your Device Firmware . . . . . . . . . . . . 101
Updating Your Profile . . . . . . . . . . . . . . . . . . . . . 103
Updating Your PRL . . . . . . . . . . . . . . . . . . . . . . . 103
Updating Your Samsung Software . . . . . . . . . . 103
2F. Voice Services . . . . . . . . . . . . . . . . . . . . 104
Voice Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Opening Menus With Voice Dialer . . . . . . . . . .
Text-to-Speech . . . . . . . . . . . . . . . . . . . . . . . . . . .
Voice Search . . . . . . . . . . . . . . . . . . . . . . . . . . . .
104
106
107
108
2G. microSD Card . . . . . . . . . . . . . . . . . . . . . 109
Your Device’s microSD Card and Adapter . . .
Connecting Your Device to Your Computer . .
microSD Card Settings . . . . . . . . . . . . . . . . . . . .
Important Connection Information . . . . . . . . . .
109
111
112
113
M580.book Page E Monday, April 18, 2011 11:18 AM
2H. Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Taking Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Recording Videos . . . . . . . . . . . . . . . . . . . . . . . . 118
2I. Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Turning Bluetooth On and Off . . . . . . . . . . . . . .
Using the Bluetooth Settings Menu . . . . . . . . .
Pairing Bluetooth Devices . . . . . . . . . . . . . . . . .
Sending Contacts via Bluetooth . . . . . . . . . . . .
Disconnecting Bluetooth Connection
During an Active Call . . . . . . . . . . . . . . . . . . . . .
120
121
122
124
125
Section 3: Sprint Service . . . . . . . . . . . . . . . . 127
3A. Sprint Service: The Basics . . . . . . . . . . 128
Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Text Messaging (SMS) . . . . . . . . . . . . . . . . . . . .
Multimedia Messaging (MMS) . . . . . . . . . . . . .
Caller ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Call Waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Making a 3-Way Call . . . . . . . . . . . . . . . . . . . . . .
Call Forwarding . . . . . . . . . . . . . . . . . . . . . . . . . .
Roaming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
128
129
131
135
136
137
137
138
3B. Web and Data Services . . . . . . . . . . . . . 140
Getting Started With Data Services . . . . . . . . .
Navigating the Web . . . . . . . . . . . . . . . . . . . . . .
Wi-Fi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sprint Mobile Hotspot . . . . . . . . . . . . . . . . . . . . .
Email . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the Android Market . . . . . . . . . . . . . . . . .
Sprint Applications . . . . . . . . . . . . . . . . . . . . . . .
Data Services FAQs . . . . . . . . . . . . . . . . . . . . . .
140
142
149
151
151
164
166
170
3C. Entertainment: TV and Music . . . . . . . . 171
Getting Started with Sprint TV and Music . . .
Sprint TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
YouTube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
171
172
172
175
3D. GPS Navigation . . . . . . . . . . . . . . . . . . . . 176
GPS Services . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Google Maps . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TeleNav GPS Navigator . . . . . . . . . . . . . . . . . . .
Getting Driving Directions . . . . . . . . . . . . . . . . .
176
176
178
178
180
M580.book Page F Monday, April 18, 2011 11:18 AM
Section 4:
Safety and Warranty Information . . . . . . . . . 187
4A. Important Safety Information . . . . . . . . 188
General Precautions . . . . . . . . . . . . . . . . . . . . . .
Maintaining Safe Use of and
Access to Your Phone . . . . . . . . . . . . . . . . . . . .
Using Your Phone With a
Hearing Aid Device . . . . . . . . . . . . . . . . . . . . . .
Caring for the Battery . . . . . . . . . . . . . . . . . . . .
Radio Frequency (RF) Energy . . . . . . . . . . . . .
Samsung Mobile Products and Recycling . .
Owner’s Record . . . . . . . . . . . . . . . . . . . . . . . . .
User Guide Proprietary Notice . . . . . . . . . . . . .
188
189
190
192
193
195
195
195
4B. Manufacturer’s Warranty . . . . . . . . . . . . 196
Manufacturer’s Warranty . . . . . . . . . . . . . . . . . . 196
Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205
M580.book Page i Monday, April 18, 2011 11:18 AM
Introduction
Your Device’s Menu
This User Guide introduces you to Sprint® service and
all the features of your new device. It’s divided into four
sections:
⽧
Section 1: Getting Started
The following table outlines your device’s main menu
structure. For more information about using your
device’s menus, see “Navigation and Customization”
on page 27.
⽧
Section 2: Your Device
From the Home screen, press
⽧
Section 3: Sprint Service Features
⽧
Section 4: Safety and Warranty Information
WARNING: Please refer to the Important Safety Information
section on page 188 to learn about information
that will help you safely use your phone. Failure to
read and follow the Important Safety Information
in this phone guide may result in serious bodily
injury, death, or property damage.
䡲
Add (
䡲
Wallpaper (
䡲
Switch ID (
䡲
Search (
䡲
Notifications (
䡲
Settings (
to open the menu:
)
)
)
)
)
)
Tap these onscreen buttons to reveal additional options
and features.
Device menus with additional options (“sub-options”)
appear with
adjacent to the list entry.
i
M580.book Page ii Monday, April 18, 2011 11:18 AM
> Add
4: Wallpapers
1: Shortcuts
1: Applications
3: Contact
5: Direct message
7: Email
9: Latitude
11: Settings
2: Bookmark
4: Direct dial
6: Directions & Navigation
8: Gmail label
10: Music playlist
> Wallpaper
1: Eco Wallpapers
3: ID wallpapers
2: Calendar
4: Home screen tips
6: Market
8: News & Weather
10: Power Control
12: Sprint ID
14: Sprint Tutorial #2
16: Sprint Tutorial #4
18: YouTube
3: Folders
1: New folder
2: All contacts
3: Contacts with phone numbers
4: Google Contacts
5: Received list from Bluetooth
6: Recent documents
7: Starred contacts
ii
2: Gallery
4: Live wallpapers
2: Gallery
2: Widgets
1: Analog clock
3: Google Search
5: Latitude
7: Music
9: Picture Frame
11: Rate Places
13: Sprint Tutorial #1
15: Sprint Tutorial #3
17: Sprint Tutorial #5
1: Eco Wallpapers
3: ID wallpapers
5: Wallpapers
4: Live wallpapers
5: Wallpapers
> Switch ID
> Search
> Notifications
> Settings > Wireless & networks
1: Airplane mode (On/Off)
2: Wi-Fi (On/Off)
M580.book Page iii Monday, April 18, 2011 11:18 AM
> Settings > Call settings
3: Wi-Fi settings
1: Wi-Fi (On/Off)
2: Network notification (On/Off)
3: WPS button connection
4:Add Wi-Fi network
1: North American dialing (On/Off)
2: International dialing
4: Bluetooth (On/Off)
3: DDTM (On/Off)
5: Bluetooth settings
4: TTY
1: Bluetooth (On/Off)
2: Device name
3: Discoverable (On/Off) 4: Scan for devices
5: <detected Bluetooth devices>
1: Normal
1: USB tethering (On/Off)
2: Help
2: Long
> Settings > Sound
7: USB connection
General
2: Mass storage
4: Ask on connection
1: Silent mode (On/Off)
2: Vibrate
8: VPN settings
1: Always
3: Only in Silent mode
1: Add VPN
9: Mobile networks
1: 3G data (On/Off)
3: Roaming settings
2: TTY HCO
4: TTY Full
4: DTMF Tones
6: Tethering
1: Charging
3: Tethered mode
1: TTY Off
3: TTY VCO
2: Never
4: Only when not in Silent mode
3: Volume
2. Roaming mode
4: Roaming guard
Incoming calls
1: Phone ringtone
iii
M580.book Page iv Monday, April 18, 2011 11:18 AM
Notifications
6: Keyboard timeout
1: Notification ringtone
Feedback
2: Audible selection (On/Off)
3: Screen lock sounds (On/Off)
4: Haptic feedback (On/Off)
> Settings > Display
1: Brightness
2: Auto-rotate screen (On/Off)
My Location
1: Use wireless networks (On/Off)
2: Use GPS satellites (On/Off)
Screen unlock
1: Set up screen lock
1: None
3: PIN
2: Pattern
4: Password
Passwords
3: Animation
2: Some animations
1: Visible passwords (On/Off)
Device administration
4: Screen timeout
1: 15 seconds
3: 1 minute
5: 10 minutes
2: 6 seconds
4: 1Same as Screen timeout
> Settings > Location & security
1: Audible touch tones (On/Off)
1: No animations
3: All animations
1: 3 seconds
3: 15 seconds
2: 30 seconds
4: 2 minutes
6: 30 minutes
1: Select device administrators
Credential storage
1: Use secure credentials (On/Off)
2: Install from SD card
iv
M580.book Page v Monday, April 18, 2011 11:18 AM
3: Set password
4: Clear storage
> Settings > Applications
1: Unknown sources (On/Off)
2: Quick launch
> Settings > Privacy
Personal data
1: Factory data reset
> Settings > SD card &
phone storage
3: Manage applications
SD card
4: Running services
1: Total space
5: Development
2: Available space
1: USB debugging (On/Off)
2: Stay awake (On/Off)
3: Allow mock locations (On/Off)
> Settings > Accounts & sync
General sync settings
1: Background data (On/Off)
2: Auto-sync (On/Off)
Manage accounts
3: Mount/Unmount SD card
4: Format SD card
Internal phone storage
1: Available space
> Settings > Language &
keyboard
1: Select language
v
M580.book Page vi Monday, April 18, 2011 11:18 AM
Text settings
Voice output
1: Android keyboard (On/Off)
1: Text-to-speech settings
2: Android keyboard
1: Vibrate on keypress
3: Auto-capitalization
5: Input languages
7: Show suggestions
2: Sound on keypress
4: Voice input
6: Quick fixes
8: Auto-complete
3: Device keyboard
1: Auto-replace
3: Auto-punctuate
1: Listen to an example
3: Default Engine
5: Speech rate
7: Pico TTS
2: Always use my settings
4: Install voice data
6: Language
> Settings > Accessibility
Accessibility settings
2: Auto-cap
4: User dictionary
> Settings > Voice input & output
Voice input
1: Voice recognizer settings
1: Language
2: Safe Search
3: Block offensive words 4: Show hints
1: Accessibility (On/Off)
Power button
1: Power button ends call (On/Off)
> Settings > Date & time
1: Automatic (On/Off)
2: Set date
3: Select time zone
4: Set time
5: Use 24-hour format (On/Off)
vi
M580.book Page vii Monday, April 18, 2011 11:18 AM
6: Select date format
8: Baseband version
1: Normal (MM/DD/YYYY)
2: MM/DD/YYYY
3: DD/MM/YYYY
4: YYYY/MM/DD
> Settings >About phone
2: Update Profile
4: Update Samsung Software
2: Status
1: Battery status
3: MSID
5: MEID
7: Signal strength
9: Roaming
11: Mobile network state
13: Bluetooth address
10: Build number
11: Hardware version
In Use Menu
1: System Updates
1: Update Firmware
3: Update PRL
9: Kernel version
1: Add call
3: End call
5: Mute/Unmute
2: Show/Hide Dialpad
4: Speaker (On/Off)
6: Bluetooth
2: My phone number
4: PRL Version
6: Network
8: Service state
10: User name
12: Wi-Fi MAC address
14: Up time
3: Battery use
4: Legal information
1: Open source licenses 2: Google legal
3: Privacy Alert from Sprint
5: System tutorial
6: Model number
7: Android version
vii
M580.book Page viii Monday, April 18, 2011 11:18 AM
M580.book Page 1 Monday, April 18, 2011 11:18 AM
Section 1
Getting Started
M580.book Page 2 Monday, April 18, 2011 11:18 AM
1A. Setting Up Service
⽧
Setting Up Your Device (page 2)
⽧
Activating Your Device (page 4)
⽧
Setting Up Your Voicemail (page 6)
⽧
Sprint Account Passwords (page 7)
⽧
Getting Help (page 8)
Setting Up Your Device
Release Latch
1. Install the battery.
Remove the battery from its packaging.
Grasp the device firmly and locate the cover
release latch.
䡲 Place your fingernail in the opening and firmly
“pop” the cover off the device (similar to a soda
can).
䡲
䡲
2
1A. Setting Up Service
Insert the battery into the opening in the back of
the device, making sure the connectors align.
Gently press down to secure the battery.
䡲 Position the battery cover over the battery
compartment and press down until you hear a
click.
䡲
M580.book Page 3 Monday, April 18, 2011 11:18 AM
䡲
to turn the device on.
If your device is activated, it will turn on, search for
Sprint service, and enter standby mode.
3. Make your first call.
䡲
Press
touch
to access the Home screen and
to access the onscreen keypad.
䡲
Use the onscreen dialpad to enter a phone
number and touch
.
WARNING: If your device has a touchscreen display, please
note that a touchscreen responds best to a light
touch from the pad of your finger. Using
excessive force when pressing on the
touchscreen may damage the tempered glass
surface and void the warranty. See “4B.
Manufacturer’s Warranty” on page 196.
Note: Your device’s battery should have enough charge for
your device to turn on and find a signal, set up your
voicemail, and make a call. You should fully charge
your battery as soon as possible.
Note: To unlock your phone from this screen, touch and
drag the lock screen.
1A. Setting Up Service
3
Setting Up Service
2. Press and hold
M580.book Page 4 Monday, April 18, 2011 11:18 AM
Activating Your Device
䢇
If you purchased your device at a Sprint Store, it is
䢇
If you received your device in the mail and it is for a new
Sprint account or a new line of service, it is designed to
probably activated and ready to use.
activate automatically. To confirm your activation,
make a phone call.
Unlock Screen
䢇
If you received your device in the mail and you are
activating a new device for an existing number on your
account, (you’re swapping phones), you can activate
on your computer online or directly on your phone.
䡲
Activate on your computer:
● Go to sprint.com/activate and follow the
䡲
Activate on your phone:
instructions.
Important: For security reasons, you will need your Sprint
phone number and PIN to use this activation
method.
1. Turn on your new phone. (Make sure the old one is
turned off.) Your phone will automatically attempt
Hands-Free Activation.
4
1A. Setting Up Service
Note: Your phone will need to complete one hands-free
activation attempt before you can continue.
2. Tap Activate to override auto-activation and start
the manual activation wizard.
Note: If you don’t override Hands-Free Activation, your phone
will attempt to auto activate five times. Wait for Retry to
appear on your screen. Tap Retry and then tap
Activate.
3. Follow the on-screen prompts to complete the
activation process.
4. After you have completed the wizard, make a
phone call to confirm your activation.
If your device is still not activated or you do not have
access to the Internet, contact Sprint Customer
Service at 1-888-211-4727 for assistance.
Note: If you are having difficulty with activation, contact Sprint
Customer Service by dialing 1-888-211-4727 from any
other phone.
Sprint ID
Once your device is activated, you have the option of
installing an ID Pack. ID Packs are bundles of
applications, ringtones, wallpapers, settings, and more.
ID Packs are installed using an application called
Sprint ID.
You can install as many as five ID Packs at any one
time, and you can easily switch from one ID Pack to
another without losing any applications already
installed.
For example, when you install the Sprint ID pack, Sprint
applications such as Sprint TV, TeleNav™ GPS
Navigator, NASCAR Sprint Cup Mobile, and Sprint
Football Live will remain in your applications.
Installing Your First ID Pack
Note: Your device must be activated, your battery should be
fully charged, and you should be in a network coverage
area before you install an ID Pack.
1. From the home screen, tap
2. On the Welcome to Sprint ID screen, tap Continue.
1A. Setting Up Service
5
Setting Up Service
M580.book Page 5 Monday, April 18, 2011 11:18 AM
M580.book Page 6 Monday, April 18, 2011 11:18 AM
䡲
If your device is in PowerSave mode, press
to reactivate the screen.
䡲
If the lock screen appears, unlock it by dragging
to the right side of the
the Unlock icon
screen.)
Note: You also have the ability to place an emergency call
directly from the Welcome to Sprint ID screen.
3. Tap Get New on the Choose your ID screen.
(My ID is the default ID Pack.)
Switching ID Packs
1. Press
>
(Sprint ID).
2. Tap an ID Pack to replace your current pack.
– or –
Tap Get New to install a new ID Pack and follow
steps 4-8 of “Installing Your First ID Pack”.
Note: Certain features of Sprint ID are subject to change. For
the most up-to-date information about using Sprint ID,
please visit www.sprint.com.
4. Tap an ID Pack on the Sprint ID screen.
Note: The Sprint ID pack comes with wallpapers, ringtones,
and applications.
5. Read the information screen for a description of
the ID Pack and touch Install.
6. Read the Terms & Conditions and tap Agree.
7. Wait for the download and install to finish.
(If prompted, tap Complete Install.)
8. Tap OK.
WARNING: DO NOT interrupt the download process.
6
1A. Setting Up Service
Setting Up Your Voicemail
Your device automatically transfers all unanswered
calls to voicemail, even if your device is in use or
turned off. You should set up your Sprint Voicemail and
personal greeting as soon as your device is activated.
Always use a password to protect against unauthorized
access.
1. From the phone standby mode, touch and
hold
.
2. Follow the system prompts to:
Create your password.
䡲 Record your name announcement.
䡲 Record your greeting.
䡲
Note: Voicemail Password
Sprint strongly recommends that you create a
password when setting up your voicemail to protect
against unauthorized access. Without a password,
anyone who has access to your device is able to
access your voicemail messages.
Sprint Account Passwords
As a Sprint customer, you enjoy unlimited access to
your personal account information, your voicemail
account, and your data services account. To ensure
that no one else has access to your information, you
will need to create passwords to protect your privacy.
Account Username and Password
If you are the account owner, you will create an account
username and password when you sign on to
www.sprint.com. (Click Need to register for access? to get
started.) If you are not the account owner (if someone
else receives the bill for your Sprint service), you can
get a sub-account password at www.sprint.com.
Voicemail Password
You’ll create your voicemail password (or passcode)
when you set up your voicemail. See “Setting Up Your
Voicemail” on page 6 for more information on your
voicemail password.
Data Services Password
With your Sprint device, you may elect to set up an
optional data services password to control access and
authorize Premium Service purchases.
For more information, or to change your passwords,
sign on to www.sprint.com or call Sprint Customer
Service at 1-888-211-4727.
1A. Setting Up Service
7
Setting Up Service
M580.book Page 7 Monday, April 18, 2011 11:18 AM
M580.book Page 8 Monday, April 18, 2011 11:18 AM
Getting Help
From Your Sprint Phone
䢇
Managing Your Account
䢇
Online: www.sprint.com
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
8
Access your account information.
Check your minutes used (depending on your Sprint
service plan).
View and pay your bill.
Enroll in Sprint online billing and automatic payment.
Purchase accessories.
Shop for the latest Sprint phones.
View available Sprint service plans and options.
Learn more about data services and other products
like Sprint Picture Mail, games, ringers, screen
savers, and more.
1A. Setting Up Service
Tap
account balance.
Tap
to check minute usage and
to make a payment.
䢇
PQRS
Tap
to add a new line of service,
upgrade your phone, purchase accessories, or
access other account services.
䢇
Tap
to access the Sprint Zone
where you can get a summary of your Sprint service,
contact Sprint, or get answers to other questions.
From Any Other Phone
䢇
䢇
Sprint Customer Service: 1-888-211-4727.
Business Customer Service: 1-800-927-2199.
M580.book Page 9 Monday, April 18, 2011 11:18 AM
Setting Up Service
Sprint 411
Sprint 411 gives you access to a variety of services and
information, including residential, business, and
government listings; movie listings or showtimes;
driving directions, restaurant reservations, and major
local event information. You can get up to three pieces
of information per call, and the operator can
automatically connect your call at no additional charge.
There is a per-call charge to use Sprint 411, and you
will be billed for airtime.
䊳
Tap
.
Sprint Operator Services
Sprint Operator Services provides assistance when you
place collect calls or when you place calls billed to a
local telephone calling card or third party.
䊳
Tap
.
For more information or to see the latest in products
and services, visit us online at www.sprint.com.
1A. Setting Up Service
9
M580.book Page 10 Monday, April 18, 2011 11:18 AM
M580.book Page 11 Monday, April 18, 2011 11:18 AM
Section 2
Your Phone
M580.book Page 12 Monday, April 18, 2011 11:18 AM
Tip: Device Software Upgrades – Updates to your device’s
2A. Device Basics
⽧
Your Device (page 13)
⽧
Viewing the Display Screen (page 17)
⽧
Turning Your Device On and Off (page 20)
⽧
Battery and Charger (page 20)
⽧
Device Function Keys (page 24)
⽧
Navigation and Customization (page 27)
⽧
Displaying Your Phone Number (page 41)
⽧
Making and Answering Calls (page 41)
⽧
In-Call Options (page 45)
⽧
Entering Text with the Onscreen Keyboard (page 49)
⽧
Entering Text using the QWERTY Keyboard (page 52)
⽧
Creating a Google Account (page 56)
12
2A. Device Basics
software may become available from time to time. Sprint
will automatically upload critical updates to your device.
• You can also use the menu to manually check for
>
and tap
and download updates. Press
Settings > About phone > System Updates to
search for and download available updates.
M580.book Page 13 Monday, April 18, 2011 11:18 AM
Your Device
Key Functions
1. Service LED blinks red when you receive a new
8. Lock/POWER
Key
voice message, prompting you to call your
voicemail.
1. Service
LED
2. Status Bar
Icons
2. Status Bar Icons provide information about your
9. Earpiece
3. Display
Screen
device’s status and options, such as signal
strength, roaming, ringer setting, messaging, signal
strength, and battery charge.
3. Display Screen displays all the information needed
to operate your device, such as the call status, the
Contacts list, and the date and time.
4. MENU Key
10. SEARCH Key
5. HOME Key
11. BACK Key
6. Microphone
12. External
Speaker
13. Camera
Lens
4. MENU Key allows you to access your device’s main
functions menu: Add, Wallpaper, Switch ID, Search,
Notifications, and Settings. While in a menu, touch
to open a list of actions available from the current
screen or onscreen option.
䡲 During an active call, press to open additional call
options such as: Contacts or Send msg.
5. HOME Key returns you to the Home screen. Press
and hold to open the recently-used applications
window.
2A. Device Basics
13
Phone Basics
7. Proximity
Sensor
M580.book Page 14 Monday, April 18, 2011 11:18 AM
6. Microphone allows other callers to hear you clearly
when you are speaking to them.
7. Proximity Sensor detects how close an object is to
the surface of the LCD. This is typically used to
detect when your face is pressed up against the
LCD, such as during a phone call.
8. Lock/POWER Key lets you turn the device on or off,
end a call, or turn off the LCD.
When the screen is turned off, press once to
return to Screen lock mode.
䡲 While the device is unlocked and not on an active
call, press and hold to display the Phone options
menu (Silent mode, Airplane mode, Power off).
䡲
9. Earpiece lets you hear the caller and automated
prompts.
10. SEARCH Key displays the Quick Search box that
can be used to search for a key term both on the
phone or online. It’s the ultimate search field
(page 25).
14
2A. Device Basics
For example, entering the word “Pa”, will display
any matching entries from your device’s Contacts
list, current device applications, online Android/
Google apps, or from any online Web page via
Google search.
䡲 Press and hold to launch Voice Search where you
can initiate a Google™ search by verbally entering
a text string. The device recognizes your spoken
words and initiates a Web search.
䡲
11. BACK Key deletes characters from the display in
text entry mode. When in a menu, pressing the
Back key returns you to the previous menu, closes
a dialog box, or exits an onscreen menu/option.
12. External Speaker lets you hear the different ringers
and sounds. You can mute the ringer when
receiving incoming calls by pressing the volume
button. The speaker also lets you hear the caller’s
voice in speakerphone mode.
13. Camera Lens, as part of the built-in camera, this
2.0 megapixel camera lets you take pictures and
videos.
M580.book Page 15 Monday, April 18, 2011 11:18 AM
14. Volume Button allows you to adjust the ringer
volume in standby mode, the voice volume during
a call, and media playback volume.
15. Voice Dialer
15. Voice Dialer allows you to launch the built-in
automatic speech recognition (ASR) software.
14. Volume
Button
16. Camera Button lets you activate the camera and
Phone Basics
camcorder and take pictures and videos.
17. Headset Jack allows you to plug in an optional
16. Camera
Button
headset for convenient, hands-free conversations.
CAUTION! Inserting an accessory into the incorrect
jack may damage the device.
18. microSD Card Slot lets you use a microSD card to
expand the memory of your phone.
19. Charger/Accessory Jack allows you to connect the
phone charger or a USB cable (included).
CAUTION! Inserting an accessory into the incorrect
jack may damage the device.
17. Headset Jack
2A. Device Basics
15
M580.book Page 16 Monday, April 18, 2011 11:18 AM
Keyboard Features
20. QWERTY
Keyboard
26. Delete Key
21. Fn Key
22. Shift
Key
23. Smiley Key
18. microSD Card Slot
25. Enter
Key
24. Space/SIM Key
20. QWERTY Keyboard provides an alphanumeric
character keyboard layout. Lets you enter numbers,
letters, and characters, as well as navigate within
menus.
21. fn Key (Function) key
, toggle to access the
numbers/symbols atop each key on the QWERTY
keyboard.
22. Shift Key lets you toggle alphabet characters
between mixed case, uppercase and lowercase.
Character case remains as selected until the Shift
key is pressed again.
19. Charger/Accessory Jack
16
2A. Device Basics
M580.book Page 17 Monday, April 18, 2011 11:18 AM
key) lets you
access Smiley icons (Emoticons).
24. Space/SIM Key lets you add spaces between
words and characters.
25. Enter Key lets you enter additional lines of text.
26. Delete Key deletes characters from the display in
text entry mode.
Viewing the Display Screen
Your device’s display screen provides information
about the device’s status and options. This list identifies
the symbols you’ll see on your device’s display screen:
Status Bar – Service Icons
Activation Not Completed – Your automatic
device activation process failed, please retry.
Status Bar – Service Icons
Airplane Mode On – Your device will not make or
receive calls or provide data access. Local
applications are still available.
Roaming – Your device is “roaming” off the
Nationwide Sprint Network.
Data Service Available – Sprint 1xRTT data
service is active.
Phone Basics
23. Smiley Key (when used with the
Data Service Communicating – Sprint 1xRTT
data service is active and communicating. When
active, the icon is animated.
Data Service Dormant – Sprint 1xRTT data
service is currently dormant.
3G Available – Sprint 3G data service is
available.
3G Communicating – Sprint 3G data service is
active and communicating.
Signal Strength – Shows your current signal
strength. (More bars = stronger signal.)
No Service – Your device cannot find a usable
signal.
2A. Device Basics
17
M580.book Page 18 Monday, April 18, 2011 11:18 AM
Status Bar – Status Icons
Call in Progress – A voice call is in progress.
Audio is routed through either the earpiece or
external speaker.
Device Power Critical – Shows your current
battery only has three percent power remaining
and will immediately shutdown.
Bluetooth Call in Progress – A voice call is being
routed through a Bluetooth headset.
Bluetooth Active – Bluetooth technology is
active and enabled.
Missed Call – You have missed an incoming
call.
Bluetooth Connected – Bluetooth technology is
active and communicating with an external
device.
Call Muted – The device microphone has been
muted.
Speaker – Speakerphone feature is enabled.
GPS Location On – Device location feature is on
and available for location-based services such
as GPS Navigation.
Battery Strength – Shows your current battery
charge level. (Icon shown is fully charged.)
GPS Communicating – Device location feature is
on and communicating.
Battery Charging – Shows your current battery
charge level and indicates it is charging.
Wi-Fi Connected – Wi-Fi is connected, active
and communicating with a Wireless Access
Point (WAP).
Battery Low – Shows your current battery
charge level is very low.
Battery Critical – Shows your current battery
charge level requires attention and your device
will soon shut off.
18
Status Bar – Status Icons
2A. Device Basics
Wi-Fi Connection Issue – Wi-Fi is active but there
is a communication issue with the target
Wireless Access Point (WAP).
M580.book Page 19 Monday, April 18, 2011 11:18 AM
Status Bar – Status Icons
microSD Unmounted – The internal microSD
card has been disconnected from the device
and is now ready for either removal or
formatting.
Vibrate Only – The ringer is set to vibrate during
Silent Mode.
microSD Removed and Missing – The internal
microSD card has been properly unmounted
from device but is missing.
Data Synchronization – Application sync is
active and synchronization is in progress for
Gmail, Calendar and Contacts.
microSD Unexpectedly Removed – The internal
microSD card has been incorrectly removed and
improperly unmounted.
Android OS Update Available – A new Android
operating system update is available for
download.
USB Connection – The device has detected an
active USB connection.
System Updates Available – A new system
update is available for download.
Sign-in/Sync Error – There has been an issue
with your connection to the Google server or
you were not properly signed into your account.
In order to use Google application or sync
features, you must set up and sign into an active
Google account.
Alarm Event – Shows you have an upcoming
alarm event.
Media Playback – A media file is currently being
played back on the device.
Phone Basics
Status Bar – Status Icons
Files Downloading – The device is downloading
selected files.
Download Successful – A recent software
download was successfully downloaded.
Calendar Reminder – Shows you have a
reminder of an upcoming Calendar event.
Silence Mode – All incoming sounds are turned
off.
2A. Device Basics
19
M580.book Page 20 Monday, April 18, 2011 11:18 AM
Status Bar – Messaging Icons
Text Message – You have new text (SMS) or
multimedia (MMS) messages.
Voicemail Message – You have new voicemail
messages.
Turning Your Device Off
1. Press and hold
for two seconds until you
see the powering-down animation on the display
screen.
2. Touch
> OK to power off the device.
New Email message – Shows you have received
either a new Internet email message or Outlook
email message via an Exchange server.
Your screen remains blank while your device is off
(unless the battery is charging).
New Gmail message – Shows you have received
a new Gmail message.
Battery and Charger
WARNING: Use only Sprint-approved or Samsung-approved
Turning Your Device On and Off
Turning Your Device On
䊳
Press and hold
.
Once your device is on, it enters standby mode – the
device’s idle state. At this point, you are ready to begin
making and receiving calls.
20
2A. Device Basics
batteries and chargers with your device. The
failure to use a Sprint-approved or Samsungapproved battery and charger may increase the
risk that your device will overheat, catch fire, or
explode, resulting in serious bodily injury, death,
or property damage.
Sprint-approved or Samsung-approved batteries and
accessories can be found at Sprint Stores or through
Samsung; or call 1-866-866-7509 to order. They’re also
available at www.sprint.com.
M580.book Page 21 Monday, April 18, 2011 11:18 AM
Your device is equipped with a Lithium Ion (Li-Ion)
battery. It allows you to recharge your battery before it is
fully drained. The battery provides up to 5 hours of
continuous digital talk time.
At 3% of charge capacity, there are only a few minutes
of talk time left, the device sounds an audible alert,
displays a critical charge icon (
), and then turns
off.
Note: Long backlight settings, searching for service, vibrate
mode, browser use, and other variables may reduce
the battery’s talk and standby times.
Tip: Watch your device’s battery level indicator and charge the
battery before it runs out of power.
Installing the Battery
䊳
2. Press the battery cover and slide it away from
camera lens.
3. Carefully remove the battery from the device.
WARNING: Do not handle a damaged or leaking Li-Ion
battery as you can be burned.
Charging the Battery
Phone Basics
Battery Capacity
Keeping track of your battery’s charge is important. If
your battery level becomes too low, your device
automatically turns off, and you will lose any
information you were just working on.
Note: Although the battery comes partially charged. It is
recommended you fully charge the battery before
using your device for the first time.
1. Connect the USB cable to the charging head.
See “Setting Up Your Device” on page 2.
Removing the Battery
1. Make sure the power is off so that you don’t lose
any stored numbers or messages.
2A. Device Basics
21
M580.book Page 22 Monday, April 18, 2011 11:18 AM
Charging Head
USB Cable
Incorrect
Correct
Correct
Incorrect
2. Insert the USB cable into the device’s charger/
accessory jack.
3. Plug the charging head into a standard AC power
outlet.
22
2A. Device Basics
Always use a Sprint-approved or Samsung-approved
desktop charger, travel charger, or vehicle power
adapter to charge your battery.
䊳
Plug the flat end of the charger into the device’s
charger jack and the other end into an electrical
outlet. The device turns on in with the screen
locked and indicates both its charge state and
percent of charge.
With the Sprint-approved Li-Ion battery, you can
recharge the battery before it becomes completely run
down.
Extending Your Battery Life
Active applications, light levels, Bluetooth usage, and
GPS functionality all act to drain your battery. The
following is a list of helpful tips that can help conserve
your battery power:
䢇 Reduce your backlight on time. See “Changing the
Backlight Time Length” on page 61.
䢇 Turn Bluetooth off when not is use. See “Turning
Bluetooth On and Off” on page 120.
䢇 Turn Wi-Fi off when not is use. See “Turning Wi-Fi On
and Off” on page 149.
䢇
䢇
䢇
䢇
䢇
Deactivate the GPS when not needed. Most
applications using this function will periodically query
the GPS satellites for your current location; each
query drains your battery. See “Activating Location
Mode” on page 176.
Do not wait until your battery is completely depleted
before charging your device. Repeating this process
of a complete discharge and recharge can over time
reduce the storage capacity of any battery.
Turn off Automatic application sync. See
“Synchronizing Accounts” on page 64.
Use the Power Control Widget to deactivate hardware
functions such as Wi-Fi, Bluetooth, GPS,
Synchronization, or LCD brightness setting.
Check the Running Services and close any
unnecessary applications.
2A. Device Basics
23
Phone Basics
M580.book Page 23 Monday, April 18, 2011 11:18 AM
M580.book Page 24 Monday, April 18, 2011 11:18 AM
Device Function Keys
The Samsung Replenish™ offers four main function
keys that can be used on any screen to provide added
functionality.
Menu Key
The Menu key (
) activates a menu for the current
screen or application. From the Home screen, the
following menu options are available:
䡲 Add (
) adds a Shortcut, Widget, Folder, or
Wallpaper to a selected screen. See “Customizing
Your Home Screen” on page 34.
䡲 Wallpaper (
) allows you to customize the
Home screen’s background, from your Pictures
folder or from the Wallpaper gallery. See
“Changing the Display Screen” on page 62.
䡲 Switch ID (
) allows you to install an ID Pack
using an application called Sprint ID.
䡲 Search (
) displays the Quick Search box, to
search for a key term on the phone or online. See
“Search Key” on page 25.
24
2A. Device Basics
For example, entering “Pa”, will display
matching entries from your Contacts list,
current applications, online Android/Google
apps, or from a Web page via Google search.
䡲 Notifications (
) allows you to display detailed
information about onscreen notification icons. See
“Using the Notifications Panel” on page 40.
䡲 Settings (
) provides quick access to the
Settings menu. See “2B. Settings” on page 58.
The Settings menu can also be accessed by
pressing
and tapping
.
●
) takes you back to your Home
The Home key (
screen (screen 3 of the 5 available screens).
Back Key
The Back key (
) returns you to the previously
active screen. If the onscreen keyboard is currently
open, this key closes the keyboard.
M580.book Page 25 Monday, April 18, 2011 11:18 AM
Search Key
Using your Device to Search
The Search key (
) displays the Quick Search box,
to search for items on the phone or online. In some
instances, this key the search box is specific to the
current application.
䡲 Press
to launch the Quick Search box.
䡲 Press and hold
to launch the Voice Search
function.
Enter a search term in the
Search Results
Quick Search box to
(Device & Web)
search for items on your Quick Search
device and on the Web.
Box
)
Phone Basics
Touch Voice Search (
to search by speaking
your search term.
You can also use Search
to dial a phone number,
as a supplement to the
current Automatic Speech
Recognition (ASR) feature.
See “2F. Voice Services”
on page 104.
2A. Device Basics
25
M580.book Page 26 Monday, April 18, 2011 11:18 AM
To search the phone and Web by entering text:
1. Press
to launch the Quick Search box.
Note: In some instances, pressing
application-specific search. Press
the Quick Search box.
reveals an
twice to open
2. Use the QWERTY or onscreen keyboard to enter
your search terms. See “Entering Text with the
Onscreen Keyboard” on page 49 or “Entering Text
using the QWERTY Keyboard” on page 52.
䡲 As you type, matching items on your device and
matches from Google’s Web search display in the
onscreen list of previously chosen search results.
䡲 Configure search preferences and settings to
display suggestions in a different manner. See
“Search Settings” on page 67.
Note: Press
to hide the onscreen keyboard and see
more search results.
3. Touch a result from the list of suggestions, phone
search results, or previously chosen search
matches. Once touched, the item opens in the
appropriate application.
– or –
If what you’re searching for is not in the current list,
) in the Quick
touch the Google Search icon (
Search Box or on the keyboard to initiate a new
search on the web.
To search the phone and Web via Voice Search:
1. Press and hold
.
– or –
Touch
(microphone icon on the side of the
Quick Search box).
Note: Touching
in an application’s search box,
searches the application by voice, not the Web.
2. From the open dialog, speak the words you want
to search for.
3. Once complete, the Voice Search application
analyzes your spoken words and displays a list of
matching keyword terms.
26
2A. Device Basics
M580.book Page 27 Monday, April 18, 2011 11:18 AM
ambient or background noises can confuse the
application and result in inaccurate search results.
To use additional Voice Search functions:
From an open Voice Search dialog, speak the following
words to access additional features:
䡲 Call allows you to initiate a call to a current
Contacts entry based on Name, Number, Phone
Number type (Work, Mobile, etc.).
䡲 Directions to allows you to initiate a navigation
session via Google maps. Use either an Address
name, Business name, business type, or other
navigation information to get the desired
directions.
䡲 Navigate to allows you to receive turn-by-turn
directions. Use either an Address name, Business
name, business type, or other navigation
information to get the desired directions.
䡲 Map of allows you to view a map of an area via
Google maps. Use either an Address name,
Business name, zip code, or other navigation
information.
Navigation and Customization
The Samsung Replenish™ is a touch-sensitive device
which allows you to not only select an onscreen option
with a single tap, but also scroll through long menu
lists.
Tip: Some menu options are also accessed by pressing and
Phone Basics
Note: For best results, use this feature in a quiet room. Loud
holding an onscreen item, such as a Contact entry from
the Contacts tab.
Home Screen Overview
The Home screen is the starting point for many
applications and functions, and it allows you to add
items like application icons, shortcuts, folders, or
Google widgets to give you instant access to
information and applications. This is the default page
and accessible from any menu by pressing
.
䢇 Status bar: located at the top of the screen, displays
both Notification and Status icons.
2A. Device Basics
27
M580.book Page 28 Monday, April 18, 2011 11:18 AM
䢇
䢇
䢇
28
Notification area displays icons associated with enduser notifications such as: email messages, calls
(missed, call in progress), new voicemail, upcoming
event, USB connection, emails, Text/MMS messages.
See “Using the Notifications Panel” on page 40.
䡲 These notifications appear at the top-left of the
screen (within the Status bar) and display
important user information.
䡲 This information can be accessed by either
swiping down from the Status bar (page 40) or by
>
accessing the Notifications panel
Notifications (
).
Status area displays icons associated with the status
of the device such as communication, coverage,
Bluetooth and Wi-Fi communication, battery levels,
GPS, etc.
Main Home Screen: a customizable screen that
provides information about notifications and device
status, allows access to application widgets.
2A. Device Basics
Status bar
Notification area
Status area
Main Home
Screen
Google search/
Widget
Shortcuts
Application tab
M580.book Page 29 Monday, April 18, 2011 11:18 AM
Extended Home Screens: the device’s screen extends
beyond the current visible screen width to provide
more space for adding icons, widgets, and more.
䡲 There are five available screens, each populated
with its own default shortcuts or widgets. Each of
these screens can be customized and the current
screen is indicated at the top by a larger numeric
circle.
䡲 Press
to access the main Home screen (3)
which appears as the default “page” on the
device and then slide your finger horizontally
across the screen to go to the left or right
extended screens (2). There are four "additional"
screens apart from the main Home screen.
䡲 Think of it as having a desktop so wide that your
screen can only display a portion at a time.
Tip: While on an extended Home screen, press
to
return to the main Home screen.
䢇
Google search: an onscreen Internet search engine
powered by Google™. Touch
to access the
Voice Search feature where you can verbally enter a
search term and initiate an online search.
䢇
䢇
Widgets: are self-contained onscreen applications
(not shortcuts). These can be placed onto any of the
available screens (Home or Extended).
Shortcuts: are icons that launch available device
applications such as Voicemail, Contacts, Phone,
Email, Alarm Clock, etc. These function the same as
shortcuts on your computer.
䡲 Although some are already found on the
Extended Home screens, the majority can also be
found within the Applications tab.
䡲 Shortcuts can be pulled out from this tab or
pulled into it (removed from an Extended Home
screen).
Note: The Status bar is visible across all Home screens.
Note: Screen #3 is the Home screen.
2A. Device Basics
29
Phone Basics
䢇
M580.book Page 30 Monday, April 18, 2011 11:18 AM
䢇
Page Navigation are a visual indication of the
currently active page. The onscreen dots (located at
the bottom left and right of the screens) indicate your
current page location.
䡲 When on the Home screen, two dots appear at
both locations (this indicates there are two pages
at either side of the current page).
䡲
Touch and hold
to reveal the Quick Screen
Access. Tap a preview to launch the selected
screen.
䢇
Application tab (
): houses all of your available
applications. Some of these applications also exist
as Widgets that can be actively placed onto an
available screen. Some sample shortcuts are:
䡲 Phone (
) launches the phone-related screen
functions (Keypad, Call Log, Contacts, and
Favorites).
䡲
Contacts (
) launches the Contacts-related
screens (Keypad, Call Log, Contacts, and
Favorites).
䡲
Email (
) launches the email application that
manages both Internet-based and Corporate
email accounts.
Using the Applications Tab
All of your device’s applications are located within the
Applications tab. This tab houses shortcuts to your
currently available applications.
Pages on left
30
Quick Screen Access
(touch and hold)
2A. Device Basics
Pages on right
Note: This tab houses all default and downloaded
applications (installed from Android Market or from the
Web).
M580.book Page 31 Monday, April 18, 2011 11:18 AM
and tap
to open the tab.
䡲
To close the Applications
screen, tap
press
again or
.
2. Scroll though the list and
tap an icon to launch the
associated application.
䡲 The screens contains
device applications such
as Browser Calculator,
Camera, Clock, Market,
Navigation, Rescue,
ThinkFree Office,
YouTube, Voice Search,
and much more.
Applications
The following is a listing of the current applications
available on both the Home/Extended screens and via
the Applications tab.
Application Icons
Browser – Launches the Sprint Powerdeck
browser (page 143).
Calculator – Launches the onscreen calculator
application (page 100).
Calendar – Launches the Calendar applications
that syncs itself to either your Google or
Outlook® Work calendar (page 93). Events can
only be synched to a managed account
(page 64).
Phone Basics
1. Press
Camera – Launches the built-in camera
(page 114).
Clock – Accesses the Clock application
(page 99).
Contacts – Displays the Contacts tab listing
current contacts, synced from either your
Google or Outlook account (page 151).
Contacts can only be synched to a managed
account (page 64).
Email – Provides access to both your Outlook
(Exchange Server-based) work email and
Internet email accounts (such as Google, Yahoo,
etc). (page 151).
2A. Device Basics
31
M580.book Page 32 Monday, April 18, 2011 11:18 AM
Application Icons
Gallery – Displays a Gallery of camera images
and video stored in the microSD card
(page 116).
My files – Launches a file browser that allows
you to view only supported image files and text
files (page 98).
Gmail – Provides access to your Gmail account
(page 151).
Navigation - Launches the Google Maps
Navigation application, allowing you to speak or
type a destination and acquire step-by-step
directions.
Google Search – Provides an onscreen Internet
search engine powered by Google™.
Latitude – Lets you see your friends’ locations
and share yours with them. The application also
lets you see your friends’ locations on a map or
in a list.
News & Weather – Launches a Web-based news
and weather feed based on your current
location.
Phone – Access the phone keypad (page 41).
Maps – Launches a Web-based dynamic map
that helps you find local businesses, locate
friends, view maps and get driving directions
(page 176).
Places – Allows others to find your business on
local search results using either Google Search
or Google Maps.
Market – Browse and search for applications on
Android Market (page 164).
Rescue – Uses location services to route
roadside assistance directly to you
Messaging – Provides access to your text
messaging application (SMS) (page 129).
Settings – Access the device’s built-in Settings
menu (page 58).
Music – Launches the built-in Music Player
(page 172).
32
Application Icons
2A. Device Basics
M580.book Page 33 Monday, April 18, 2011 11:18 AM
Sprint Hotspot – Launches the Sprint Mobile
Hotspot which allows you to share your phone’s
3G mobile Internet connection with Wi-Fienabled devices (page 151).
Voice Search – Launches your device’s built-in
automatic speech recognition (ASR) software
and initiates a Google search based on the
recognized text (page 108).
Sprint ID – ID Packs which are bundles of ID
applications, ringtones, wallpapers, settings, and
more (page 5).
YouTube – Launches the YouTube webpage via
the browser (page 175).
Sprint Zone – Access links to Sprint Zone
services like Account Information, What’s New,
recommended Android applications, and other
promotional content (page 167).
talk
Application Icons
Phone Basics
Application Icons
Note: The Email application includes access to both
Exchange Server-based email (also known as Work
email) and other Internet-based email providers such
as Yahoo and Gmail.
Talk – Launches a Web-based Google Talk
application that lets you chat with family and
friends over the Internet for free.
ThinkFree Office – Provides access to a
Microsoft® Office-compatible Office® suite. It also
provides a centralized location for the
management of your online and offline files.
Voice Dialer – Launches your device’s built-in
automatic speech recognition (ASR) software,
called Voice Control, to dial a phone number in
your Contacts or to launch phone functions
(page 104).
2A. Device Basics
33
M580.book Page 34 Monday, April 18, 2011 11:18 AM
Customizing Your Home Screen
You can customize your Home screen by doing the
following:
䢇
䢇
䢇
䢇
䢇
Creating Shortcuts
Adding and Removing Widgets on the current screen
Repositioning Widgets
Creating Folders
Changing the Background (Wallpaper)
Creating Shortcuts
Shortcuts are different than the current Home screen
Widgets that only launch an application. Shortcuts
activate a feature, action, or launch an application.
Note: To move a shortcut from one screen to another, activate
the new screen, then add the shortcut.
To add a shortcut from the Applications tab:
1. Press
to activate the
Home screen.
2. Select a location (screen)
for your new shortcut by
scrolling across your
available screens until you
reach the desired one. See
“Home Screen Overview”
on page 27.
3. Tap the Applications (
)
tab to reveal all your
current applications. By
default, the applications
are listed in a Grid view.
4. Scroll down through the
list and locate your desired
application.
34
2A. Device Basics
M580.book Page 35 Monday, April 18, 2011 11:18 AM
immediate shortcut of the selected icon and closes
the Applications tab. The new shortcut then
appears to hover over the currently active screen.
Note: The same shortcut can be added to any of the
available screens (Home or Extended). The application
you add to the screen will still appear within the
Applications tab.
6. While still holding the onscreen icon, position it on
the current screen. Once complete, release the
screen to lock the shortcut into its new position.
To add a shortcut via the Add to Home screen:
1. Press
to activate the Home screen.
2. Touch and hold on an empty area of the screen.
4. Tap a selection from the
available list:
Applications
Bookmark
䡲 Contact
䡲 Direct dial
䡲 Direct message
䡲 Directions & Navigation
䡲 Email
䡲 Gmail label
䡲 Latitude
䡲 Music playlist
䡲 Settings
䡲
䡲
Phone Basics
5. Touch and hold the onscreen icon. This creates an
5. Follow the onscreen instructions to add the new
shortcut to your current Home screen.
3. From the Add to Home screen window tap
Shortcuts.
2A. Device Basics
35
M580.book Page 36 Monday, April 18, 2011 11:18 AM
To delete a shortcut:
To add a Widget:
1. Press
1. Press
to activate
the Home screen.
2. Touch and hold the
3. From the Add to Home screen window tap Widgets.
desired shortcut. This
unlocks it from its
location on the current
screen.
4. Tap an available widget to place it on your current
screen.
Choices include: Analog Clock, Calendar, Google
Search, Home screen tips, Latitude, Market, Music,
News & Weather, Picture frame, Power Control,
Sprint ID, Sprint Tutorials, and YouTube.
䡲
3. Drag the icon over the
Delete tab (
release it.
) and
Adding and Removing
Widgets
To remove a Widget:
1. Touch and hold a widget until you can move it
Delete (Shortcut or Widget)
Widgets are self-contained
applications that reside in
either your Applications tab or on the Home or
Extended screens. Unlike a shortcut, this widget
appears as an onscreen application.
Note: To move a widget from one screen to another, it must
first be deleted from its current screen. Activate the new
screen, then add the widget.
36
2A. Device Basics
to activate the Home screen.
2. Touch and hold on an empty area of the screen.
around on the screen.
2. Touch and hold the desired widget. This unlocks it
from its location on the current screen.
M580.book Page 37 Monday, April 18, 2011 11:18 AM
) and
release it.
䡲 As you place the widget into the Trash, both items
turn red.
䡲 This action does not delete the widget, just
removes it from the current screen.
To place a Widget onto a different screen:
1. Follow the steps to remove the widget from the
current screen.
Note: A widget cannot be dragged from a current screen to
an adjacent screen. It must first be removed from its
current location, then added back to a new current
screen.
2. Touch and drag across your screen to view
another available screen (there are five available
screens [1 Home and 4 Extended screens]).
3. Follow the steps to add a widget to the current
Creating and Managing Folders
Folders are located on any of the three available
screens and can contain both files (such as data and
images) and Contact information or entries.
To create a folder onscreen:
1. Press
to activate the Home screen.
2. Touch and hold on an empty area of the screen.
3. From the Add to Home screen window tap Folders.
4. Tap an available folder type to place it on your
current screen.
Choices include New folder, All contacts, Contacts
with phone numbers, Received list from Bluetooth,
Google Contacts, Recent documents, or Starred
contacts.
䡲
Note: Starred contacts are those Contact entries tagged as
very important.
screen.
2A. Device Basics
37
Phone Basics
3. Drag the widget over the Delete tab (
M580.book Page 38 Monday, April 18, 2011 11:18 AM
Accessing Recently-Used Applications
Your device keeps a running list of your six most
recently used applications.
1. Press and hold
Portrait View
to open the recently-used
applications window.
2. Tap an icon to open the
related application.
Changing the Screen
Orientation
The Samsung Replenish™ is
capable of automatically
changing the orientation of
some onscreen content. The
device’s built-in
accelerometer senses movement and changes its
angle/orientation.
This allows the device to change the onscreen content
(images, video, Web pages) to properly display based
on the current angle (some screens may not
automatically change).
38
2A. Device Basics
Landscape View
To manually activate the auto-rotate feature:
1. Press
>
and tap
> Display.
M580.book Page 39 Monday, April 18, 2011 11:18 AM
checkmark indicates the feature is enabled. (See
“Keyboard Features” on page 16.)
Menu Navigation
There are three ways to navigate through a menu:
䢇 Using your finger (page 39)
䢇 Using the keyboard’s navigation/arrow keys
(page 39)
Selecting Menu Items
As you navigate through a menu with these navigation
keys, options are highlighted. Select any option by
pressing a directional arrow from the keyboard and
moving the onscreen selection, highlighting it and
pressing
.
䡲 If the option is numbered, you can select it by
pressing the corresponding number on the
phone’s keypad.
Selecting Menu Items Using your Fingers
Up Enter
As you navigate through the menu, you activate menu
options by tapping the onscreen entry. Select any
option by tapping it.
Left
1. Tap an onscreen icon to launch a menu or feature.
Right
2. Scroll your finger across the screen to navigate
Down
through a menu list (bottom up or top down).
3. Tap a menu item to make a selection or activate a
field.
To view your text messages using the directional keys:
To launch the dialpad:
䊳
Tap
1. Use the keys until
is highlighted.
from the Home screen.
2A. Device Basics
39
Phone Basics
2. Scroll down and tap Auto-rotate screen. A
M580.book Page 40 Monday, April 18, 2011 11:18 AM
2. Press the navigation keys until Messaging (
) is
highlighted and press
. (If you have any text
messages, they are displayed.)
3. Press Up or Down to highlight an available
message and press
to view its content.
Backing Up Within a Menu
To go to the previous menu:
䊳
Press
.
To return to Home screen:
䊳
Press
.
Note: Not all items have context menus. If you touch and hold
an item that has no context menu, nothing happens.
Using the Notifications Panel
The Notification area indicates new message events
(data sync status, new messages, calendar events, call
status, etc). You can expand this area to provide more
detailed information about the current onscreen
notification icons.
40
2A. Device Basics
M580.book Page 41 Monday, April 18, 2011 11:18 AM
finger down the screen.
2. Tap a notification entry to open the associated
application.
Note: The Notifications panel can also be opened on the
Home screen by pressing
Notifications.
and then tapping
Displaying Your Phone Number
䊳
Press
>
and tap
> About phone
> Status. (Your phone number and other
information about your device and account is
displayed.)
Phone Basics
1. Touch and hold the Status bar, then slide your
Making and Answering Calls
Making Calls
1. Press
and then tap
.
2. Enter a phone number using the onscreen dialpad
and tap
.
If you make a mistake while dialing, touch
to erase the numbers.)
䡲 To make a call when you are roaming and Call
Guard is enabled, select Roam Call and tap
.
䡲
3. Slide
when finished.
You can also place calls from your device using your
History listings (page 78).
2A. Device Basics
41
M580.book Page 42 Monday, April 18, 2011 11:18 AM
Dialing Options
䢇
When you enter numbers
within the Keypad, you will
see three onscreen options.
䢇 Voicemail (
) to
place a call to your
voicemail.
Answering Calls
䢇
䢇
Call (
) to place a
new call to the current
number.
Delete (
) to delete
the digits from the current
number.
To see additional options, tap
.
䢇 Add to contacts to add the current number to a new
or existing Contacts entry.
䢇 Add 2 sec pause: to insert a two-second pause to
enter a 2-second delay within a number string (the
phone continues dialing after 2 seconds without any
additional keys being pressed).
42
2A. Device Basics
Add wait to insert a hard pause within the number
string (the phone waits for your input). A wait requires
that any consecutive numbers be manually sent by
tapping Yes.
1. Make sure your device is on. (If your device is off,
incoming calls go to voicemail.)
Note: All call answering options listed below require you
touch and hold the button to activate the function.
When unlocked, some functions can be activated by
tapping the onscreen button.
2. Touch and drag
to the right to answer an
incoming call.
䡲 Reject (
) sends the call directly to your
voicemail box.
Note: All incoming call options listed below require you to
touch and hold the button to activate the function.
When unlocked, some functions can be activated by
tapping the onscreen button.
M580.book Page 43 Monday, April 18, 2011 11:18 AM
up or down Volume button.
Your device notifies you of incoming calls in the
following ways:
䢇 The phone rings or vibrates.
䢇 The backlight illuminates.
䢇 The screen displays an incoming call message.
If the incoming call is from a number stored in your
Contacts, the entry’s name is displayed. You may also
see the caller’s phone number, if available.
Answering a Roam Call With Call Guard Enabled
Call Guard is an option that helps you manage your
roaming charges when making or receiving calls while
outside the Nationwide Sprint Network. Please see
“Roaming” on page 138 for more information.
䊳
When you do not answer an incoming call, the Status
bar indicates
.
To display a Missed Call entry from the Home screen:
1. Touch and hold the Status bar, then slide your
finger down the screen.
2. Tap the Missed call entry (
). This opens the
Call log screen.
3. Tap an entry and select
.
– or –
Highlight an entry using the Navigation keys and
press
to return the call.
– or –
Touch and hold an entry from the Call Log list and
from the context menu, select Call [number].
Touch OK to answer the call.
Note: When your device is off, calls go directly to voicemail.
Slide
Calling Emergency Numbers
Emergency call and
You can place calls to 911, touch
enter
from the keypad,
Ending a Call
䊳
Missed Call Notification
Phone Basics
Tip: To silence the ringer on an incoming call, press either the
to the right.
2A. Device Basics
43
M580.book Page 44 Monday, April 18, 2011 11:18 AM
even if your device is locked or your account is
restricted.
Note: When you place an emergency call, your device
automatically enters Emergency mode.
During an emergency call, press
to display your
options. Select an option.
䢇 Speaker to activate speakerphone mode.
䢇 Show/Hide dialpad to show or hide the onscreen
dialpad.
䢇 End call to end the current call.
To exit Emergency mode:
1. Slide
to end a 911 call.
2. Tap Exit on the Emergency Call Back mode.
Note: When you end the 911 call, you are returned to the
Emergency Call Back mode.
Within the Emergency Call Back mode, tap OK or
press the Home key to use another menu.
44
2A. Device Basics
Enhanced 911 (E911) Information
This device features an embedded Global Positioning
System (GPS) chip necessary for utilizing E911
emergency location services where available.
When you place an emergency 911 call, the GPS
feature of your device seeks information to calculate
your approximate location.
Note: Depending on several variables, including availability
and access to satellite signals, it may take up to 30
seconds or more to determine and report your
approximate location.
Important: Always report your location to the 911 operator
when placing an emergency call. Some
designated emergency call takers, known as
Public Safety Answering Points (PSAPs) may not
be equipped to receive GPS location information
from your device.
M580.book Page 45 Monday, April 18, 2011 11:18 AM
In-Call Options
䢇
Add call to initiate a 3-way call. This can take up to 20
Once you initiate a call,
you will see three
onscreen options.
䢇 End call (
) to end
the current call.
(Touch and drag to
the left.)
䢇
Swap calls to receive a call in waiting.
䢇
End call to end the current call.
䢇
Mute to mute the microphone during an active call.
䢇
Speaker (
) to
route the device’s
audio through the
speaker (On) or
through the earpiece
(Off). (Touch and drag
to the right.)
Dialpad (
) to enter dial tones using the
onscreen dialpad. (Touch and drag up.)
Tap again to disable the microphone.
Phone Basics
䢇
seconds to become available.
Note: If Mute is activated, the speaker mode is deactivated.
䢇
Speaker to route the device’s audio through the
speaker (On) or through the earpiece (Off).
䊳
Activate Speaker to route the device’s audio
through the speaker. (You can adjust the speaker
volume using the volume buttons.)
䊳
Deactivate Speaker to use the device’s earpiece.
WARNING: Because of higher volume levels, do not place
the device near your ear during speakerphone
use.
To see additional options, tap
.
Show/Hide dialpad to toggle the display of the
onscreen dialpad.
䢇
2A. Device Basics
45
M580.book Page 46 Monday, April 18, 2011 11:18 AM
䢇
Bluetooth to route the device’s audio through a
connected Bluetooth headset (On) or through the
speaker (Off). (See “2I. Bluetooth” on page 120.)
䡲
When the call is routed to a Bluetooth headset,
the current call area shows the Bluetooth call
icon (
).
End-of-Call Options
1. After you receive a call from or make a call to a
phone number that is not in your Contacts, locate
the number in your Call log list.
2. Tap the number to view options, or tap
to call
back the entry.
Note: The Headset button is activated to show the current call
is routed to the connected Bluetooth headset.
To route the current call back to the device,
tap Headset to temporarily use the device. Tap
Bluetooth again to route the call back to the
connected Bluetooth headset.
䡲 When Bluetooth or the Bluetooth headset is
turned off, the call is routed through either the
earpiece or speaker and shows (
).
●
) up to use the
Touch and drag Dialpad (l
onscreen dialpad to enter additional numbers, for
example, an extension or access code.
䡲
46
For example: When you call your bank’s 800
number, use your dialpad to enter your account
number and PIN.
2A. Device Basics
Additional Calling Options
To obtain additional options such as phone number
and the duration of the call, you must access the Call
Log screen. See “2C. Call Log” on page 78.
1. Press
and then tap
>
Call log
.
2. Tap an entry from the list and then tap:
䡲
Call (number) to dial the selected number and call
䡲
Edit number before call to change the selected
䡲
Send text message to send the selected number
the recipient.
phone number.
an SMS (text) message.
M580.book Page 47 Monday, April 18, 2011 11:18 AM
Saving a Phone Number
The number of Contacts entries you can store in your
device is limited only by available memory space. Your
device automatically sorts the Contacts entries
alphabetically. Each entry’s name can contain an
unlimited number of characters.
Your device automatically sorts the Contacts entries
alphabetically. (For more information, see “2D.
Contacts” on page 84.)
To save a new number from the Home screen:
1. Tap
2. Press
>
Phone
and enter a number.
and tap Add to Contacts.
3. Tap Create new contact.
4. Tap a destination for your
new contact to be
synchronized. With each
new email account you
pat@gmail.com
create, the list of options
Google
grows.
pat@mycompany.com
Corporate
䡲 The new contact can be
easily synchronized to
either your Phone (locally
stored- will be deleted
when phone resets),
Google (Gmail account), or Corporate (OutlookExchange Server).
Phone Basics
Add to contacts to add the new number to your
Contacts. (See “Saving a Phone Number” on
page 47.)
䡲 View contact to view the contact information.
䡲
Note: You will not see the above option to select a destination
unless you have previously established a Google or
Corporate account on the device. See “Synchronizing
Accounts” on page 64.
5. Touch the First name and Last name fields and use
the onscreen or QWERTY keyboard to enter the
new contact name.
6. Touch Done to store and update the new entry.
2A. Device Basics
47
M580.book Page 48 Monday, April 18, 2011 11:18 AM
3. Tap the phone entry number.
Finding a Phone Number
You can search Contacts for entries by name.
1. Press
and tap
.
– or –
From the Keypad screen, tap
Contacts
letters you enter, the more specific the search.)
3. To display contact details, tap an entry from the list.
Dialing From the Contacts List
and tap
.
Shortcut: From Keypad screen, tap Contacts (
Contacts
) to list
entries.
2. Scroll through the list and tap the entry you want to
call.
Press
number.
to dial the entry’s default phone
Speed Dialing
.
2. Enter the first letter or letters of an entry. (The more
1. Press
– or –
Dialing from Favorites
You can quickly dial contacts you call frequently by
adding them to your Favorites list. Although not
assigned to a speed dial number, this is a quick and
easy way to dial your favorite Contacts. See “Adding
Entries to Your Favorites” on page 92.
To speed dial a contact from Favorites:
1. Press
and then tap
> Favorites.
2. Scroll through the list and tap the contact.
3. Tap
to place a call.
Dialing a number from the Favorites tab is similar to
dialing one from the Contacts tab. See “Dialing From
the Contacts List” on page 48.
48
2A. Device Basics
M580.book Page 49 Monday, April 18, 2011 11:18 AM
When placing international calls, Plus Code Dialing
automatically enters the international access code for
your location (for example, 011 for international calls
made from the U.S.). See “Activating Plus Code
Dialing” on page 69.
1. Press
and then tap
2. Touch and hold
.
until you see a “+” on the
display screen.
3. Dial the country code and phone number, and
then tap
. (The device automatically
prepends the access code for international dialing,
followed by the country code and phone number.)
Entering Text with the Onscreen
Keyboard
When you activate a field where you can enter text,
numbers, symbols, etc., you can either use the
onscreen keyboard or QWERTY keyboard.
Onscreen keyboard entry can be done in either Portrait
or Landscape orientations. The Landscape orientation
provides more space and results in slightly bigger
onscreen keys. If you find that you prefer to enter text
via the onscreen keyboard, and need bigger keys, use
this orientation.
Activating the Landscape Keyboard
Although the device can also be set to automatically
change its orientation to Landscape once the phone is
rotated, Samsung Replenish™ can also be set to
automatically change its orientation. To use the
onscreen keyboard in Landscape mode, this feature
must first be enabled.
See “Changing the Screen Orientation” on page 61.
Selecting a Text Input Mode
Your device provides convenient ways to enter letters,
numbers, and symbols whenever you are prompted to
enter text (for example, when adding a Contacts entry
or when using email and text messaging).
2A. Device Basics
49
Phone Basics
Plus (+) Code Dialing
M580.book Page 50 Monday, April 18, 2011 11:18 AM
In this section we’ll cover the steps necessary to enter
text using the onscreen keyboard, where the touch
screen is the primary method of both text and
character entry.
Note: Some characters and types, such as some symbols
and Emoticons, are not accessible from the onscreen
keyboard.
1. From a screen where you can enter text, tap the
2. Select Input Method from the onscreen context
menu.
Onscreen Keyboard Overview
䢇
Entry field: a field where text, number, or other
characters can be entered.
Send
input field to reveal the onscreen keyboard.
2. Select one of the following Text mode options:
䡲
ABC to use alphabetic characters from the
onscreen keyboard (See page 51.)
䡲 ?123 to enter numbers by pressing the numbers
on the onscreen keyboard. (See page 52.)
Tip: When entering text, tap
Entry field
Suggested
words
Delete
to change letter
capitalization.
䡲
Voice Input allows the device to use its built-in
voice recognition software to hear your voice and
transcript it directly into text.
To change the input method:
1. From an active text input screen, touch and hold a
text input field.
50
2A. Device Basics
Caps/ALT
Text mode
Voice Input
Enter
M580.book Page 51 Monday, April 18, 2011 11:18 AM
䢇
䢇
䢇
Suggested Word choices: a row of selectable word
choices based on the current set of entered text. Tap
an onscreen choice to insert the selection into your
text entry field at the current cursor position.
Tap the grey left and right arrows on this field to
reveal additional word choices.
Delete: deletes characters from the entry field.
CAPS/ALT: When in ABC mode, this key changes the
capitalization of the subsequent entered characters.
When in ?123 mode, this key can show additional
symbol characters.
䡲 Capitalization in Abc mode can be altered by
using the Caps button. See “ABC Mode” on
page 51.
䡲 Symbol used in ?123 mode can be enhanced by
accessing additional symbol characters. See
“Entering Numbers and Symbols” on page 52.
Text mode: There are two available modes; ABC and
?123.
䡲 ABC mode contains only characters. Text mode
button indicates ?123 .
䡲 ?123 mode contains only symbols. Text mode
button indicates ABC .
䢇
Voice Input mode: Tapping this button activates the
built-in microphone and voice recognition software.
䡲 Speak clearly into the microphone. When
complete, your spoken words are recognized,
converted to text, and inserted into your current
cursor position.
Note: It is recommend that to avoid incorrect conversions, you
Phone Basics
䢇
use this feature in an area relatively free from
background noises.
ABC Mode
In ABC mode, you can enter only alphabetic
characters from the onscreen keyboard. The text mode
shows ?123 .
1. Select the ABC mode. (See “Selecting a Text Input
Mode” on page 49.)
Capitalization in ABC mode can be altered by
using the Caps button.
䡲
next character is lowercase.
only the next character is uppercase.
all subsequent characters are uppercase.
2A. Device Basics
51
M580.book Page 52 Monday, April 18, 2011 11:18 AM
Note: A green circle on the shift key above indicates the
keyboard is set to “Shift-Lock” where all characters are
entered in uppercase.
2. Tap the corresponding onscreen keys to begin
typing your word.
䡲 If you make a mistake, tap
character. Touch and hold
word.)
DEL
DEL
to erase a single
to erase an entire
By default, the first letter of an entry is capitalized and
the following letters are lower case. After a character is
entered, the cursor automatically advances to the next
space after two seconds or when you enter a character
on a different key.
Entering Numbers and Symbols
In ?123 mode, you can only enter symbols characters
from the onscreen keyboard. The text mode shows
ABC .
To enter numbers:
1. Tap ABC to enter the ?123 mode.
2. Tap the appropriate numeric key. (See “Selecting a
Text Input Mode” on page 49.)
52
2A. Device Basics
To enter symbols:
1. Tap ABC to enter the ?123 mode.
2. Tap the appropriate numeric key.
– or –
Tap ALT to select from additional symbol
characters. The key shows ALT when the
additional character set is active.
Entering Text using the QWERTY
Keyboard
Accessing the QWERTY Keyboard
The Samsung Replenish™ has a built-in, keyboardstyle keypad, referred to as a full QWERTY keyboard.
The keyboard is located beneath the display screen.
Using the QWERTY keyboard, you can type letters,
numbers, punctuation, and other special characters
into text entry fields or other applications simpler and
faster than using the onscreen keyboard.
M580.book Page 53 Monday, April 18, 2011 11:18 AM
1. Touch and hold the text entry field.
2. From the Edit text context menu, tap an available
function:
䡲
Select all highlights all characters in the text
䡲
Select text/Stop selecting text lets you manually
message field.
highlight characters in the text message field.
Cut deletes the selected characters in the current
text message field.
䡲 Cut all deletes all characters in the current text
message field.
䡲 Copy copies selected characters in the current
text message field.
䡲 Copy all copies all characters in the current text
message field.
䡲 Paste inserts the previously copied text into the
message field.
䡲 Input method provides additional text input
methods. The default is Android keyboard.
䡲 Add XXX to dictionary adds the currently
highlighted word to your device’s dictionary.
䡲
Using the Keyboard
In this section we’ll cover the steps necessary to enter
text using the QWERTY keyboard. Using your device's
QWERTY keyboard is just like using any standard
computer keyboard.
The following keys perform special functions when
entering text:
Fn: Allows you to use blue characters
displayed at the top of the QWERTY keys.
Examples: $, @, #, !
Shift: Changes the text input mode
among Upper/Lower/Mixed case mode.
Smiley: When used with
, launches
the Smileys page. Scroll down and tap an
entry from the extensive list of Emoticons.
Space/SIM: Inserts an empty space.
OK/Enter: Moves the insertion point to the
next line in a message.
2A. Device Basics
53
Phone Basics
To reveal additional QWERTY text editing options:
M580.book Page 54 Monday, April 18, 2011 11:18 AM
Delete: Deletes the previous character,
similar to the backspace key on a
computer keyboard.
From a text entry screen, use the keyboard to enter
different character types. Select one of the following
character types:
䡲 Letters to enter the alphabetic characters
associated with each key. (See page 54.)
䡲 Numbers to enter numbers by pressing the
numbers on the keyboard. (See page 55.)
䡲 Symbols to enter symbols. (See page 55.)
䡲 Smileys to enter smileys or “Emoticons.” (See
page 55.)
Tip: When entering text, press
to change letter
capitalization (ABC > Abc > abc).
The keyboard provides dual-use keys labeled with
alphabetic characters on the lower half and numbers
and symbols on the upper half. Press the key
corresponding to the blue character you want to enter.
54
2A. Device Basics
Entering Characters
The entered character (of a field or new sentence) is
always an initial uppercase letter. By default, text is
entered in lowercase characters unless altered by
pressing
.
To enter uppercase and lowercase characters:
1. Press
to make the next character uppercase.
Characters revert back to lowercase after the next
character is typed.
– or –
twice to make all subsequent characters
Press
uppercase (all new characters are in uppercase).
䡲 Pressing
cycles through the capitalization
modes (all lowercase, initial uppercase, and all
uppercase).
2. Press the corresponding keys:
䡲
For example, to enter the word “Bill” within a text
field, type the keypad sequence below.
M580.book Page 55 Monday, April 18, 2011 11:18 AM
䡲
If you make a mistake, press
character. Press and hold
to erase a single
䡲
to erase all
If you make a mistake, press
character. Press and hold
previously entered text.
to erase a single
to erase all
previously entered text.
For example, to enter “9:30,” you would use the
keyboard sequence shown below.
Phone Basics
䡲
Bill
䡲
To enter all uppercase characters, quickly press
twice.
BILL
9:30
Entering Numbers
Symbols and Smileys
The keyboard can be used to enter numbers, letters,
and symbols. The number keys are located along the
top on the QWERTY keyboard.
Symbols are accessed by combining the
key with
the correct number key. These symbols appear in blue
above the keyboard keys.
1. Press the numeric key corresponding to your
desired number choice
2A. Device Basics
55
M580.book Page 56 Monday, April 18, 2011 11:18 AM
Smileys (Emoticons) are accessed by pressing
and then selecting an image from the Insert Smiley
page that is then inserted at your current cursor
position.
To enter “smileys” (Emoticons):
1. Position the cursor where you want the symbol to
appear within your message.
2. Press
To enter symbols:
>
to open the onscreen smiley
page.
1. Position the cursor where you want the symbol to
appear within your message.
3. Scroll through the list and select a smiley by
touching the onscreen icon.
2. Press
and then press the blue key
corresponding to the symbol you want to insert.
䡲 For example, to enter “I’m #1,” you would use the
keyboard sequence shown below.
Creating a Google Account
You will need a Google account to access several
device features such as Gmail, Google Maps, Google
Talk, and the Android Market applications. Before you
are able to access Google applications, you must enter
your account information. These applications sync
between your device and your online Google account.
1. From a computer, launch your preferred Web
browser and navigate to www.google.com.
2. On the main page, click Sign-in > Create an
I’m #1
account now.
3. Follow the onscreen prompts to create your free
account.
56
2A. Device Basics
M580.book Page 57 Monday, April 18, 2011 11:18 AM
4. Log into your provided email address, locate the
email from Google, and respond to the new email
to both confirm and activate your new account.
Signing Into Your Google Account
1. Launch the application that requires a Google
Phone Basics
account (such as Android Market or Gmail).
2. Click Next > Sign in.
Note: If you do not already have a Google account, touch
Create and follow the onscreen prompts to create your
new account.
3. Touch the Username and Password fields and
enter your information. See “Entering Text with the
Onscreen Keyboard” on page 49 or “Entering Text
using the QWERTY Keyboard” on page 52.
4. Tap Sign in. Your device then communicates with
the Google servers to confirm your information.
5. Create a new Gmail username by entering a prefix
for your @gmail.com email address.
For additional information about synchronizing
accounts, see “Synchronizing Accounts” on page 64.
2A. Device Basics
57
M580.book Page 58 Monday, April 18, 2011 11:18 AM
2B. Settings
The Settings menu can be accessed by one of two
ways on the Replenish™:
䊳
Press
>
.
and tap
– or –
⽧
Sound Settings (page 58)
⽧
Display Settings (page 61)
⽧
Language Settings (page 63)
⽧
Location Settings (page 63)
⽧
Synchronizing Accounts (page 64)
⽧
Search Settings (page 67)
⽧
Messaging Settings (page 68)
⽧
Call Settings (page 69)
⽧
Airplane Mode (page 69)
⽧
TTY Use With Sprint Service (page 70)
⽧
Security Settings (page 71)
Press
and tap
>
.
Sound Settings
Ringer Types
Ringer types help you identify incoming calls and
messages. You can assign ringer types to individual
Contacts entries, types of calls, and types of messages.
Selecting Ringer Types for Voice Calls
Your device provides a variety of ringer options that
allow you to customize your ring and volume settings.
1. Press
>
Phone ringtone.
and tap
> Sound >
2. Tap a ringtone from the available list. The ringtone
briefly plays when selected.
3. Tap OK to assign a ringer.
58
2B. Settings
M580.book Page 59 Monday, April 18, 2011 11:18 AM
Selecting Audible Touch Tones
Activation of Feature Sounds
Your device provides the ability to play a sound when
you are both using the dialpad and tapping the screen.
When tapping onscreen items, using the dialpad, or SD
card notifications, you can enable whether an audible
sound plays for those features.
>
and tap
> Sound.
Selecting Ringer Types for Notifications
The notification area displays icons associated with
user notifications such as: email messages, calls
missed, new voicemail, upcoming event, USB
connection, Text/MMS messages.
You can select the ringtone that plays when your
device receives new notifications.
1. Press
1. Press
>
and tap
> Sound.
2. Tap Audible selection or Screen lock sounds to
the option).
>
and tap
> Sound.
2. Tap Notification ringtone.
3. Tap a notification ringtone from the available list.
The ringtone then briefly plays when selected.
4. Tap OK to assign a ringer.
activate the feature (by placing a checkmark on
the option).
䡲 Audible selection plays a sound when making any
onscreen selection.
䡲 Screen lock sounds plays a sound when the
screen is unlocked.
Adjusting the Volume Settings
Adjust the volume settings of both the device and
Media playback to suit your needs and your
environment.
1. Press
>
and tap
Settings
1. Press
2. Tap Audible touch tones (to place a checkmark on
> Sound >
Volume.
2. Tap Ringtone, Media or Alarm.
2B. Settings
59
M580.book Page 60 Monday, April 18, 2011 11:18 AM
3. Touch and drag the onscreen slider, adjust the
Never: your device uses sound only for all
notifications and alerts.
䡲 Only in silent mode: your device vibrates for
notifications and alerts when Silent mode is
active.
䡲 Only when not in Silent mode: your device only
vibrates for notifications and alerts when Silent
mode is not active.
䡲
volume level, and tap OK.
䡲 Within Volume, touch Use incoming call volume for
notifications to match notification volume to the
current call ringtone volume.
Tip: You can adjust the ringer volume in standby mode (or
the earpiece volume during a call) by pressing the
volume button on the left side of your device.
To set your device to vibrate while using the dialpad:
Vibrate
1. Press
To set your device to vibrate for incoming calls and silent
for notifications:
䊳
Press the volume button down in standby mode
until you see
on the screen.
To set your device to always vibrate for incoming calls:
1. Press
>
and tap
> Sound >
Vibrate.
2. Tap a feature to enable it. A green light indicates
the feature is enabled:
䡲 Always: your device vibrates for all incoming calls
and notifications.
60
2B. Settings
>
and tap
> Sound.
2. Tap Haptic feedback. (If you have already checked
the option, tapping it again deselects the option.)
Silence All
The Silence All option allows you to mute all sounds
without turning your device off (except for Media
volume).
To activate Silence All:
䊳
Press and hold the volume button down in standby
mode until you see
on the screen.
M580.book Page 61 Monday, April 18, 2011 11:18 AM
To deactivate Silence All:
䊳
䡲
Press the volume button up repeatedly to select a
volume level.
To set your device to Silent mode:
1. Press
>
and tap
> Sound.
2. Tap Silent mode. This option silences all audio on
the device except for media and alarms. (If you
have already checked the option, tapping it again
deselects this option.)
Clear the checkmark to disable this automatic
orientation adjustment.
Window Animation
This feature provides animated transitions when
onscreen windows open and close.
1. Press
>
and tap
> Display >
Animation.
2. Tap No animations, Some animations, or
All animations to activate the feature.
Display Settings
Changing the Backlight Time Length
Changing the Screen Orientation
Select how long the display screen remains lit after you
press any key. This is the delay time before the screen
automatically turns off.
1. Press
>
and tap
> Display.
2. Tap Auto-rotate screen. A checkmark indicates the
1. Press
>
Screen timeout.
and tap
> Display >
Settings
Although most screens will change orientation once
the phone is rotated, this feature can be manually
enabled to change the orientation for all screens when
rotation is detected.
2. Tap a time setting.
Note: Long screen backlight settings reduce the battery’s talk
and standby times.
feature is enabled.
2B. Settings
61
M580.book Page 62 Monday, April 18, 2011 11:18 AM
Changing the Keyboard Backlight Time
Length
Select how long the keyboard stays lit after you press
any key. This is the delay time before the keyboard
backlight automatically turns off.
1. Press
>
Keyboard timeout.
and tap
> Display >
1. Press
>
and tap
(Wallpaper).
2. Tap Eco Wallpapers, Gallery, ID Wallpapers,
Live Wallpapers, or Wallpapers.
Eco Wallpapers lets you choose from an
Note: Long keyboard backlight settings reduce the battery’s
talk and standby times.
Changing the Brightness
Adjust your screen’s brightness to suit your
surroundings.
>
Choose what you see on the Home screen (behind
your shortcuts and Widgets) while powering on or off
the device, and when in standby mode.
䡲
2. Tap a time setting.
1. Press
Changing the Display Screen
and tap
> Display >
Brightness.
2. Touch and drag Brightness slider left or right to
adjust the screen contrast and tap OK.
Note: Not available when Auto Brightness is enabled.
assortment of wallpapers that reflect scenes from
nature.
䡲 Gallery taken using the built-in camera or copied
to your device as a wallpaper. You can crop the
picture before setting it as a wallpaper. See
“Assigning a Picture to an Entry” on page 91 to
learn how to crop the picture.
䡲 ID Wallpapers lets you choose from wallpapers
available from the currently assigned ID pack.
䡲 Live Wallpapers provides a selection of preloaded
animated video wallpapers.
䡲 Wallpapers provides a selection of built-in
wallpaper images.
3. Scroll through available images and tap a
selection to preview it.
62
2B. Settings
M580.book Page 63 Monday, April 18, 2011 11:18 AM
4. Tap Set wallpaper to assign a preset image.
Tap Save to assign a picture as a wallpaper.
Adjusting the Date and Time
Your device obtains time and date information from the
network. In cases where you are outside network
coverage, you may need to adjust these values.
>
and tap
> Date & time.
2. Tap Automatic to disable the feature by removing
the checkmark.
information is displayed on your device. The
selected date format is also applied to the date
displayed in Alarm Clock.
Language Settings
To assign the default language used by the Android
operating system:
1. Press
Note: If enabled, you cannot alter the date, time zone or time
values.
>
and tap
keyboard > Select language.
> Language &
2. Tap either English or Español. All menus are then
3. Tap Set date. Adjust the date, month, and year by
tapping
7. Tap Select date format to select how the date
or
. Tap Set when finished.
4. Tap Select time zone, then select a time zone from
the onscreen list.
5. Tap Set time. Adjust the hour and minute by
tapping
or
. Tap the am or pm icon to
change the value. Tap Set when finished.
updated to the new language.
Location Settings
Settings
1. Press
6. Tap Use 24-hour format to toggle between using a
12-hour or a 24-hour format.
– or –
Your device’s Location feature allows the network to
detect your position, for use with location-based
services. Turning Location off will hide your location
from everyone except 911.
2B. Settings
63
M580.book Page 64 Monday, April 18, 2011 11:18 AM
Note: Turning Location on will allow the network to detect
your position using GPS technology, making some
Sprint applications and services easier to use. Turning
Location off will disable the GPS location function for all
purposes except 911, but will not hide your general
location based on the cell site serving your call. No
application or service may use your location without
your request or permission. GPS-enhanced 911 is not
available in all areas.
To enable your device’s GPS Location feature:
1. Press
>
and tap
> Location &
security.
2. Tap Use GPS satellites. A checkmark indicates the
GPS location feature is enabled.
To enable Location via wireless networks:
1. Press
>
and tap
> Location &
security.
2. Tap Use wireless networks. A checkmark indicates
the feature is enabled.
䡲 This service uses available wireless networks to
pinpoint your location within certain applications
such as Google Maps (page 176).
64
2B. Settings
3. Tap Agree. Enabling this feature allows Google to
collect anonymous location data regardless if any
location application or other related feature is
active or in use.
䡲 Tap Use wireless networks > disagree to disable
the collection of data. Enabling this feature can
utilize more resources and slow performance.
Synchronizing Accounts
Your device provides the ability to synchronize data
from a variety of different sources or sites. These
accounts can range from Google, a Corporate
Exchange Email Server, and other social sites such as
Facebook, Twitter, and MySpace.
Corporate and Google accounts provide the ability to
synchronize Calendar events and Contacts.
To enable the auto-sync feature:
1. Press
>
and tap
> Accounts &
sync.
2. Tap Auto-sync. A checkmark indicates the feature
is enabled.
M580.book Page 65 Monday, April 18, 2011 11:18 AM
Synchronizing Your Google Account
By default, there are no accounts managed by the
device. These must be manually added.
To add an existing Google account:
1. Press
>
and tap
> Accounts &
sync.
2. Tap Add account > Google.
3. Click Next > Sign in.
Note: If you do not have a Google account, touch Create and
follow the prompts to create your new account.
4. Touch the Username (@gmail.com) and Password
fields and enter your information. See “Entering
Text with the Onscreen Keyboard” on page 49 or
“Entering Text using the QWERTY Keyboard” on
page 52.
5. Tap Sign in. Your device then communicates with
the Google servers to confirm your information.
Your existing Gmail account then appears within
the Managed accounts area of the screen.
䡲 Any changes or updates to your Gmail account is
then automatically updated to your device.
To configure the Google management settings:
1. Press
>
and tap
> Accounts &
sync.
2. Tap
within the Google account field to reveal
the account’s synchronization settings screen.
3. Tap the parameters you wish to synchronize
(Sync Contacts, Sync Gmail, Sync Calendar). A
checkmark indicates the feature is enabled.
4. Press
to return to the previous screen.
Synchronizing Your Corporate Account
By default, there are no Corporate accounts managed
by the device. These must be manually added.
Note: Once a corporate email account is created, it is
automatically added as a managed account.
2B. Settings
65
Settings
This feature enables the synchronization of data
between your device and external sites or servers.
䡲 The two main components are Contacts and
Calendar Events. Before these can be
synchronized, they must be added to the
managed accounts list.
䡲
M580.book Page 66 Monday, April 18, 2011 11:18 AM
To add a new Corporate account:
1. Press
>
and tap
●
> Accounts &
sync.
2. Tap Add account > Microsoft Exchange ActiveSync.
3. Follow the prompts to set up your Corporate email
account. See “Corporate Email (Outlook)” on
page 159.
䡲 Changes or updates to your Corporate/Outlook
account are automatically updated to your device.
●
●
To configure the Corporate management settings:
1. Press
>
and tap
> Accounts &
sync.
●
●
2. Tap
within the Corporate account field to
reveal the account’s synchronization settings.
●
3. Tap the parameters you wish to synchronize.
䡲
Account settings allows you to configure:
●
●
66
Account name displays the name used by the
device to track the account.
Your name displays the name used in the
From field within your outgoing emails.
2B. Settings
●
Amount to synchronize to assign the sync
range for your incoming and outgoing emails
between your device and your external
exchange server. Choose how many days
worth of emails should the device and server
synchronize. Choose from: 1 day, 3 days,
1 week, 2 weeks, 1 month. or All emails.
Default account assigns this account as the
default used when sending out new emails.
Out of Office Settings configures your out of
office notifications.
Empty deleted items allows you to delete your
email account’s trash bin remotely.
Sync schedule allows you to configure your
email sync schedule.
Email size: Configures the incoming email size
allowed to pass through to your device
automatically without user interaction. Larger
emails will have to be retrieved manually.
Email notifications enables the device to
display a status bar icon
when new
emails have been received.
M580.book Page 67 Monday, April 18, 2011 11:18 AM
●
●
●
●
●
●
●
Select ringtone assigns an audible ringtone
䡲
when a new or upcoming event is pending.
Vibrate assigns a vibration when a new or
upcoming event is pending.
Incoming settings provides access to the
Domain, password, and exchange server
parameter fields.
Sync contacts synchronizes the contacts
between your device and the remote
exchange server. A checkmark indicates the
feature is enabled.
Sync calendar synchronizes your exchange
calendar entries between your device and the
remote exchange server. A checkmark
indicates the feature is enabled.
Period to sync Calendar assigns a period for
your device to sync calendar events.
Add signature activates the email signature
feature.
Signature allows you to create an outgoing
email signature attached to new emails sent
from your device.
Sync Contacts synchronizes the contacts between
your device and the remote exchange server. A
checkmark indicates the feature is enabled.
䡲 Sync Calendar synchronizes your corporate
calendar between your device and the remote
exchange server. A checkmark indicates the
feature is enabled.
4. Press
to return to the previous screen.
For more detailed Work/Corporate email information,
see “Corporate Email (Outlook)” on page 159. For
more information on Corporate Calendar
synchronizing, see “Synchronizing Corporate Calendar
Events” on page 93.
Search Settings
You can use the Replenish™’s search preferences to
configure some aspects of Google Web search (for
example, whether it makes suggestions below the
Quick Search Box as you type), and what phone
features you want to include in searches.
2B. Settings
Settings
●
67
M580.book Page 68 Monday, April 18, 2011 11:18 AM
Configuring the Search Settings
.
1. Press
>
2. Press
and tap Search settings.
and tap
– or –
Touch and hold the Status bar, then slide your
finger down the screen. See “Using the
Notifications Panel” on page 40.
2. Tap a message entry to open the Messaging
Messaging Settings
application.
Your device’s advanced messaging capabilities let you
send and receive many different kinds of text
messages without placing a voice call. (For more
information, see “Text Messaging (SMS)” on page 129.)
Messaging settings allow you to decide how you would
like to be notified of new messages, create a signature
with each sent message, and create your own preset
messages.
Deleting Old Text Messages
Delete messages you have read whenever you like, or
have your device delete them automatically for you. A
thread is a series of text conversations between two
parties. A single thread occurs between two parties;
selecting all threads chooses your stored text
conversations with all past contacts.
To delete a specific message thread:
Viewing Notifications of Received Messages
1. Press
When you receive a message, your device notifies you
by displaying an icon within the Notification area at the
top left of your Home screen.
䡲
indicates a new text or MMS message
was received.
2. Select a message thread.
1. Press
68
>
2B. Settings
and tap
.
3. Press
and tap
>
.
and tap Delete thread.
To delete all stored messages:
1. Press
and tap
2. Press
and tap Delete threads.
>
.
M580.book Page 69 Monday, April 18, 2011 11:18 AM
Call Settings
2. Tap North American dialing to deactivate the
Your device allows you to configure call settings such
as Plus code dialing usage, Other International Dialing
options, and TTY configuration.
3. Tap International Dialing.
feature. This enables the International Dialing field.
and tap
> Call settings.
2. Tap North American dialing to activate the feature
(a checkmark appears in the adjacent field).
Changing the International Dialing Code
By default, the international dialing prefix (code) is set
to 011. This code can not be changed until the feature
is temporarily disabled. Once disabled, the field
becomes accessible and can be altered.
1. Press
>
and tap
Press and hold
on the QWERTY keyboard to
delete the current prefix.
5. Enter a new value and tap OK.
6. Tap North american dialing to reactivate the feature.
This disables the International Dialing field.
Airplane Mode
Airplane Mode allows you to use many of your device’s
features, such as Games, Memo, and Music, when you
are in an airplane or in any other area where making or
receiving calls or data is prohibited. When you set your
device to Airplane Mode, it cannot send or receive any
calls or access online information.
> Call settings.
2B. Settings
69
Settings
Plus Code dialing allows you to have the phone
automatically dial the international access code for
your location once you touch and hold
.
See “Plus (+) Code Dialing” on page 49.
>
DEL
from the
onscreen keyboard to delete the previous value.
– or –
Activating Plus Code Dialing
1. Press
4. Tap the entry field and press
M580.book Page 70 Monday, April 18, 2011 11:18 AM
1. Press and hold
2. Tap
to reveal the Phone options.
– or –
1. Press
>
and tap
> Wireless &
networks.
2. Tap Airplane mode to place a checkmark in the
adjacent field.
While in Airplane Mode, your device’s Status area will
display (
).
To deactivate Airplane Mode:
1. Press and hold
2. Tap
TTY Use With Sprint Service
Airplane mode (Airplane Mode is OFF).
to reveal the Phone options.
Airplane mode (Airplane Mode is ON).
Your device is compatible with select TTY devices.
Please check with the manufacturer of your TTY device
to ensure that it is compatible with digital cell phones.
Your device and TTY device will connect via a special
cable that plugs into your phone’s headset jack. If this
cable was not provided with your TTY device, contact
your TTY device manufacturer to purchase the
connector cable.
To turn TTY Mode on or off:
– or –
1. Press
A TTY (also known as a TDD or Text Telephone) is a
telecommunications device that allows people who are
deaf, hard of hearing, or who have speech or language
disabilities, to communicate by telephone.
>
and tap
> Wireless &
networks.
2. Tap Airplane mode to remove the checkmark.
1. Press
>
and tap
> Call settings >
TTY. (You will see an informational message.)
2. Read the onscreen disclaimer and tap Yes.
3. Touch TTY Off to turn TTY mode off.
– or –
Touch any of the following to enable the feature:
TTY HCO, TTY VCO, or TTY Full.
䡲
70
2B. Settings
M580.book Page 71 Monday, April 18, 2011 11:18 AM
䊳
Dial PQRS
operator.
to reach an
For additional information about Sprint Relay Services
and TTY compatibility, call Sprint Relay Customer
Service at 800-676-3777 or visit www.sprintrelay.com.
For additional technical support you may call
1-888-987-4357, or access the following website:
www.samsung.com/us/consumer/learningresources/
mobile/accessibility/pop_accessibility.html.
Note: In TTY Mode, your device will display the TTY access
icon.
If TTY mode is enabled, the audio quality of non-TTY
devices connected to the headset jack may be
impaired.
WARNING: 911 Emergency Calling
Sprint recommends that TTY users make
emergency calls by other means, including
Telecommunications Relay Services (TRS),
analog cellular, and landline communications.
Wireless TTY calls to 911 may be corrupted
when received by public safety answering points
(PSAPs), rendering some communications
unintelligible. The problem encountered appears
related to software used by PSAPs. This matter
has been brought to the attention of the FCC,
and the wireless industry and the PSAP
community are currently working to resolve this.
Security Settings
Accessing the Security Menu
All of your device’s security settings are available
through the Security menu. You can secure your data
and limit phone access by requiring a screen unlock
pattern every time your device is turned on or every
time it wakes up from sleep mode (when the screen
turns off).
2B. Settings
Settings
To access the state Telecommunications Relay Service
(TRS) for assistance with TTY calls:
71
M580.book Page 72 Monday, April 18, 2011 11:18 AM
䊳
Press
>
and tap
> Location &
security.
1. Press
Your Device’s Lock Feature
Locking Your Device
When your device is locked, you can only receive
incoming calls or make calls to 911.
䊳
Press
. Locking the screen prevents
accidental screen touches from activating phone
functions.
Unlocking Your Device
1. Press
to awaken the device.
2. Touch and drag the unlock icon to the right.
Your Device’s Unlock Pattern Feature
You can increase your device’s security by creating a
screen unlock pattern (disabled by default). When
enabled, you must draw the correct unlock pattern on
the screen to unlock and regain access to the device.
72
Creating an Unlock Pattern
2B. Settings
>
and tap
> Location &
security.
2. Scroll down list and tap Set up screen lock >
Pattern.
3. Read the information on the screen, then tap Next.
4. Review the onscreen tutorial on pattern creation,
then tap Next.
M580.book Page 73 Monday, April 18, 2011 11:18 AM
point, then, without removing your finger from the
screen, drag your finger over adjacent points until
the grey trace line overlaps each point and they are
highlighted with a green circle.
Important: You must slide your finger on the screen to create
the pattern and not touch individual dots. If you
make a mistake or a point is not properly
selected, a red circle will appear.
6. When you have connected at least four dots in a
vertical, horizontal or diagonal direction, lift your
finger from the screen when finished.
7. Tap Continue to record the pattern.
8. Confirm the new pattern by redrawing it and then
tapping Confirm.
Once the feature is enabled, additional unlock pattern
options are then enabled from within the Security &
location menu list.
2. Remove the checkmark adjacent to the Use visible
pattern field.
䡲
Removing this checkmark prevents the unlock
pattern from displaying on the unlock screen.
What to do if you have forgotten your pattern:
If you fail to draw the correct unlock pattern on the
screen after five attempts, you are prompted to wait for
30 seconds before you can try again.
䊳
If you have forgotten your screen unlock pattern,
tap Forgot pattern.
䡲 Sign in using your Google Account name and
password, and create a new screen unlock
pattern before regaining access to the Home
screen.
Changing the Unlock Pattern
1. Press
>
and tap
security > Change screen lock.
> Location &
Configuring the Unlock Pattern Settings
2. Draw the current pattern on the screen.
To remove the unlock pattern from the Lock screen:
3. Draw a new pattern.
1. Press
>
and tap
Settings
5. Draw your pattern by touching your first onscreen
> Location &
security.
2B. Settings
73
M580.book Page 74 Monday, April 18, 2011 11:18 AM
4. Re-enter the same numeric sequence and tap OK.
Calling in Lock Mode
When your device is locked, you can only receive
incoming calls or make calls to 911or Sprint Customer
Service.
1. Press
to reveal the lock screen.
Note: The Unlock Pattern applies if the Require Pattern
setting is enabled.
Keypad to place your emergency call.
䡲 Draw your unlock pattern to regain access to the
full dialer and unlock the device.
Using a PIN
>
2. Scroll down to the menu list and tap Set up screen
lock > PIN.
3. Use the onscreen keyboard to enter a numeric PIN
and tap Continue.
74
2B. Settings
>
and tap
> Location &
security.
2. Scroll down to the menu list and tap Change
screen lock.
numeric PIN and tap Continue.
4. Use the onscreen keyboard to enter a new
numeric PIN and tap Continue.
5. Re-enter the same numeric sequence and tap OK.
Using a Password
Creating a PINs to Unlock the Screen
>
and tap
Location and security.
1. Press
3. Use the onscreen keyboard to enter your current
2. Tap Emergency call to reveal the Emergency
1. Press
To change your PIN:
Creating a Password to Unlock the Screen
1. Press
>
and tap
Location and security.
>
2. Scroll down to the menu list and tap Set up screen
lock > Password.
3. Use the onscreen keyboard to enter an
alphanumeric password and tap Continue.
M580.book Page 75 Monday, April 18, 2011 11:18 AM
4. Re-enter the same alphanumeric sequence and
tap OK.
1. Press
To change your Password:
>
>
and tap
> Location &
security.
and tap
> Location &
security.
2. Scroll down to the menu list and tap Change
screen lock.
3. Use the onscreen keyboard to enter your current
alphanumeric password and tap Continue.
4. Re-enter the same alphanumeric sequence and
tap OK.
Using Visible Passwords
When enabled, this feature allows you to view the text
being entered into a password field as you type it. So
many times there are other applications that insert an
asterisk (*) as your type. This can be confusing and
can cause issues. What if you mistyped the password
or used the wrong case? When enabled, you can see
what you are entering. This feature is enabled by
default.
2. Tap Visible passwords (to remove the checkmark
on the option).
Managing Your Available Memory
You can manage the information and configuration
related to both your microSD card and built-in device
storage memory. The available device memory
provided by these two locations is called Internal phone
storage.
To view your device’s total available memory:
1. Press
>
phone storage.
and tap
> SD card &
2. Review the two memory sections for available
space information:
SD card displays the memory information specific
to an internally installed microSD card. This
amount of space can be altered by replacing the
current microSD card.
䡲
2B. Settings
75
Settings
1. Press
To disable visible passwords:
M580.book Page 76 Monday, April 18, 2011 11:18 AM
䡲
Internal phone storage displays the memory
information specific to the built-in device memory.
This memory amount can not be altered because
it is part of the device hardware.
To view your microSD card storage information:
1. Press
>
phone storage.
and tap
> SD card &
2. Locate the SD card section.
3. Review the Total space and Available space fields:
䡲
Total space indicates the total size of the currently
inserted microSD card. This includes both
available and used space information.
● To determine the currently amount of used
memory on the card, take the Total space and
subtract the remaining available space.
Note: Not all of the microSD card is registered in the available
space, as a small percentage of the storage is unread.
A 2GB microSD card will show approximately 1.89GB
available.
䡲
76
Available space indicates only the amount of
remaining free memory space available on the
microSD card.
2B. Settings
To view your device’s storage information:
1. Press
>
phone storage.
and tap
> SD card &
2. Locate the Internal phone storage section.
Manage Running Services
This service is an efficient method for managing power
consumption and processor/memory resources.
Processes can be stopped until the device is restarted.
To stop a currently running service:
1. Press
>
> Running services.
and tap
> Applications
2. Tap an onscreen process entry.
3. Read the Stop service? dialog and touch Stop.
Note: These stopped processes are restarted once the
device is restarted (power cycled).
Third-party Task Manager applications are also
available from the Google Marketplace.
M580.book Page 77 Monday, April 18, 2011 11:18 AM
2. Tap the third-party application, and from the
Erasing Device Content
Application info screen, tap Uninstall.
Use the Manage applications menu to quickly erase
selected content and uninstall third-party applications
stored in your device.
To clear an application’s cache:
1. Press
>
and tap
> Manage applications.
> Applications
Resetting Your Device
Resetting the device restores all the factory defaults,
including the ringer types and display settings. All data,
including downloaded applications are deleted.
Important: Back up your important data before you perform
a factory reset of the device.
2. Press
and tap Sort by size to display the
current Manage applications list by amount of
memory or cache usage.
3. Tap the application whose cache you wish to
delete.
4. From the Application info screen, tap Clear data
and/or Clear defaults.
1. Press
>
and tap
> Privacy >
Factory data reset. (You will see a disclaimer.)
2. Read the disclaimer and tap Reset phone.
3. If you are certain that you would like to restore all
factory settings, tap Erase everything.
To uninstall third-party applications:
>
and tap
> Manage applications.
> Applications
Settings
1. Press
Important: Only third-party applications can be uninstalled.
Applications preinstalled on the device can not be
removed.
2B. Settings
77
M580.book Page 78 Monday, April 18, 2011 11:18 AM
Viewing Call Log
2C. Call Log
⽧
Viewing Call Log (page 78)
⽧
Call Log Options (page 80)
⽧
Checking a Missed Call (page 81)
Call Log (History) is a list of the phone numbers (or
Contacts entries) for calls you placed, accepted, or
missed. Call log makes redialing a number fast and
easy. It is continually updated as your device
automatically adds new numbers to the beginning of
the list and removes the oldest entries from the bottom
of the list.
⽧
Making a Call From Call Log (page 81)
To access these call notifications:
⽧
Saving a Number From Call Log (page 82)
⽧
Altering a Number From Call Log (page 82)
Touch and hold the Status bar, then slide your
finger down the screen.
⽧
Editing a Number From Call Log (page 83)
– or –
⽧
Erasing the Call Log (page 83)
Press
78
2C. Call Log
䊳
>
and tap
.
M580.book Page 79 Monday, April 18, 2011 11:18 AM
The Notification area of the Home screen (upper-left)
displays phone notifications, status, or alerts such as:
History
Call in progress: Indicates there is
a call currently active and in
progress.
Missed Call: Indicates an incoming
call was missed.
From within the Call log screen, each entry contains the
phone number (if it is available) and Contacts entry
name (if the number is in your Contacts).
Dialed: Indicates all outgoing calls
made from your device.
Received: Indicates any received
calls that were answered.
Missed: Indicates any missed calls.
These are routed to your voicemail.
2C. Call Log
79
M580.book Page 80 Monday, April 18, 2011 11:18 AM
To access the Call log:
1. Press
and tap
>
Call log
Call options
(tap)
.
Call log screen
2. Tap an entry to view available options.
Shortcut: You can also press
from the Home screen to
display your recent calls.
Note: Call log records only calls that occur while the device is
turned on. If a call is received while your device is
turned off, it will not be included in history.
Call Log Options
This list provides easy access to redial an entry, or you
can also choose to access two types of history entry
lists depending on how they are touched.
䢇 Highlight an entry from the list and press
to
quickly redial the selected entry. See “Making a Call
From Call Log” on page 81.
Entry-specific options
(touch and hold)
䢇
80
2C. Call Log
Highlight a contact entry name or number to reveal
the call options screen:
䡲 Call allows you to redial the entry by name or
number.
M580.book Page 81 Monday, April 18, 2011 11:18 AM
䢇
Checking a Missed Call
1. Locate
from the Notifications area of the
History
Send text message allows you to create a new text
message to the selected entry.
䡲 Time provides the time and date of the call.
䡲 Add to contacts to save the number if it is not
already in your Contacts. (See “Saving a Number
From Call Log” on page 82.)
Touch and hold an entry to display the entry-specific
context menu:
䡲 Call [Number] to redial the current phone number.
(See “Saving a Number From Call Log” on
page 82.)
䡲 Send text message allows you to create a new text
message to the selected entry.
䡲 Edit number before call to make alterations to the
current phone number prior to redial. See
“Altering a Number From Call Log” on page 82.
䡲 Add to contacts to save the number if it is not
already in your Contacts. (See “Saving a Number
From Call Log” on page 82.)
䡲 View contact to view the information for the
currently stored Contacts entry.
䡲 Remove from call log to delete the entry from the
Call Log list.
䡲
Status bar.
2. Touch and hold the Status bar, then slide your
finger down the screen.
3. Tap the Missed call entry to open the Call log
screen.
4. Tap an entry from the list. See “Plus (+) Code
Dialing” on page 49.
Making a Call From Call Log
1. Press
and tap
>
Call log
.
2. Tap a desired entry.
– or –
Touch and hold an entry name/number from the
list, then tap Call [Number].
Note: You cannot make calls from History to entries identified
as Unknown, No ID, Restricted or Private Number.
2C. Call Log
81
M580.book Page 82 Monday, April 18, 2011 11:18 AM
Saving a Number From Call Log
Altering a Number From Call Log
The number of Contacts entries you can store in your
device is limited only by available memory space. Your
device automatically sorts the Contacts entries
alphabetically. Each entry’s name can contain an
unlimited number of characters.
If you need to make a call from Call log and you need
to alter the number prior to dialing, you can add the
appropriate prefix by prepending the number.
1. Touch and hold an entry > Add to contacts >
Create new contact.
2. Tap the First name and Last name field to create a
new Contacts entry.
3. Use either the onscreen keypad or the phone’s
keypad.
After you have saved the number, your device displays
the new Contacts entry in place of the previous
number. (See “Contacts Entry Options” on page 89.)
Note: You cannot save phone numbers already in your
Contacts or from calls identified as Unknown, No ID,
Restricted or Private Number.
82
2C. Call Log
1. Press
and tap
>
Call log
.
2. Touch and hold an entry to access the
entry-specific options menu.
3. Tap Edit number before call.
4. Edit the number using the onscreen dialpad or
delete digits by pressing
numbers.
5. Tap
䡲
to erase the
once the number has been changed.
To add the new number to an existing Contacts
entry, see “Editing a Number From Call Log” on
page 83.
Editing a Number From Call Log
Erasing the Call Log
If you need to make a call from Call log and you need
to alter the number prior to dialing, you can add the
appropriate prefix by prepending the number.
You can delete either an individual call log entry or all
current entries from the Call log list.
1. Press
and tap
>
Call log
.
2. Touch and hold an entry > View contact.
– or –
1. Press
and tap
>
Call log
.
2. Touch and hold an entry and tap Remove from call
log.
Tap an entry to view the call options screen.
3. From the Contacts entry details page, press
and touch Edit contact.
4. Edit the number using the onscreen dialpad or
delete digits by pressing
numbers.
To clear a single entry from the Call log list:
to erase the
To clear all entries from the Call log list:
1. Press
and tap
2. Press
and touch Clear call log.
>
Call log
.
3. Tap OK.
5. Tap Done once the number has been changed.
2C. Call Log
83
History
M580.book Page 83 Monday, April 18, 2011 11:18 AM
M580.book Page 84 Monday, April 18, 2011 11:18 AM
Creating a New Contacts Entry
2D. Contacts
⽧
Creating a New Contacts Entry (page 84)
⽧
Saving a Phone Number (page 86)
⽧
Confirming Contact Synchronization (page 87)
⽧
Contacts Menu Options (page 88)
⽧
Contacts Entry Options (page 89)
⽧
Editing a Contacts Entry (page 89)
⽧
Adding a Number to a Contacts Entry (page 90)
⽧
Editing a Contacts Entry’s Number (page 90)
⽧
Selecting a Ringer Type for an Entry (page 90)
⽧
Assigning a Picture to an Entry (page 91)
⽧
Deleting Entries (page 91)
⽧
Adding Entries to Your Favorites (page 92)
If existing Google and
Corporate email accounts
have been synchronized to
your device, these will be
made available to your device
pat@gmail.com
during the creation of new
Google
entries. These new Contacts
pat@mycompany.com
entries can be assigned or
Corporate
saved to synched accounts
such as Phone, Google, or Corporate.
Your device automatically sorts the Contacts entries
alphabetically. Each entry’s name can contain an
unlimited number of characters. You can create either
a Phone, Google or Corporate contact.
䢇 Phone contacts are stored locally on the device.
WARNING: If the device is ever reset to its factory default
parameters, locally stored contacts can be lost.
䢇
Google contacts are shared with your existing
Google account and can also be imported to your
device after you have created a Google Mail account.
84
2D. Contacts
M580.book Page 85 Monday, April 18, 2011 11:18 AM
Corporate (also know as Work or Outlook) contacts
are those contacts that are intended to be shared
with either an Exchange Server or from within
Microsoft® Outlook®.
1. Press
and tap
.
and tap
> Contacts (
2. From the top of the screen, press
by tapping the word.
5. Tap the label button (to the left of the Phone
number field) to select a category such as: Home,
Mobile, Work, Work Fax, Home Fax, Pager, Other,
Custom (to create your own unique category type).
– or –
Press
Note: Use the predictive text row to shortcut a name selection
).
>
New contact.
Shortcut: Enter the phone number from the Keypad and
> Add to contacts. Proceed with
press
steps 4–5.
3. Tap a destination type (Phone, Google, or
Corporate).
Note: You will not see the option to select a destination unless
you have previously established a Google or Corporate
account on the device.
4. Tap the First name and Last name fields, and enter
a name for the new entry. See Entering Text with
the Onscreen Keyboard (page 49) or Entering Text
using the QWERTY Keyboard (page 52).
6. Tap a phone number field and enter a phone
Contacts
䢇
number.
Tap
to enter additional phone numbers for
the new Contacts entry.
䡲 Tap
on the QWERTY keyboard to remove a
previously entered phone number.
䡲
7. Enter additional information into these categories:
Email, Postal address, Organization, or More (IM,
Notes, Nickname, or Website).
Use your finger to slide the page up or down to
see additional fields and categories.
䡲
8. Tap Done to complete and store the new entry.
After saving the number, your device displays the new
entry within the Contact list. (See “Contacts Entry
Options” on page 89.)
2D. Contacts
85
M580.book Page 86 Monday, April 18, 2011 11:18 AM
Tip: ICE – In Case of Emergency
Note: You will not see the option to select a destination unless
To make it easier for emergency personnel to identify
important contacts, you can list your local emergency
contacts under “ICE” in your device’s Contacts list. For
example, if your mother is your primary emergency
contact, list her as “ICE–Mom” in your Contacts. To list
more than one emergency contact, use “ICE1–___,”
“ICE2–___,” etc.
Saving a Phone Number
To save a number from the Keypad:
1. Press
and tap
.
2. Enter a phone number using either the onscreen
dialpad or QWERTY keyboard.
3. Press
and tap Add to Contacts > Create new
contact.
4. Tap a destination type (Phone, Google, or
Corporate).
5. Tap Create new contact from the Contacts screen.
86
2D. Contacts
you have previously established a Google or Corporate
account on the device.
6. Tap the First name and Last name fields, and enter
a name for the new entry. See Entering Text with
the Onscreen Keyboard (page 49) or Entering Text
using the QWERTY Keyboard (page 52).
7. Tap the label button (to the left of the Phone
number field) to select a category such as: Home,
Mobile, Work, Work Fax, Home Fax, Pager, Other,
Custom (to create your own unique category type).
8. Tap a phone number field and enter a phone
number.
9. Tap Done to complete and store the new entry.
M580.book Page 87 Monday, April 18, 2011 11:18 AM
3. To synchronize Gmail Contacts, tap Sync Contacts.
Confirming Contact
Synchronization
A checkmark indicates the feature is enabled.
– or –
To synchronize Corporate Contacts, tap Sync
Contacts. A checkmark indicates the feature is
enabled.
Note: Any change on either side (Device, Gmail, or
Corporate/Outlook Contacts), is reflected on the other
side after a sync process.
With syncing, any Contacts entries (with phone
numbers, email addresses, pictures, etc.) are updated
and synced with your Samsung Replenish™.
For more information about synching existing
managed accounts, see “Synchronizing Accounts” on
page 64.
1. Press
>
Accounts & sync.
and tap
>
Contacts
Synching data from your managed accounts allows
you to add and manage a new or existing contact from
your online or remote accounts to your device. Prior to
syncing, you must first have an active Google or
Corporate account with current Contact entries, and be
signed into your account via the device.
The process of updating your Contacts tab can take
several minutes. If after 10-20 minutes, your list has not
been updated, repeat steps 2-3.
4. Your Contacts tab then reflects any updated
Contact information.
This update process works both ways. For
example, any changes on the device are updated
to your Gmail Contacts list after sync.
䡲
2. Tap
within the desired account field to reveal
the account’s synchronization settings screen.
2D. Contacts
87
M580.book Page 88 Monday, April 18, 2011 11:18 AM
Contacts tab
Contact entry’s
Overview page
Contacts Menu Options
1. Press
and tap
.
2. Touch and hold an entry
Contact Group
Contact Details
Note: Syncing of contacts requires you are logged into your
Gmail and Corporate accounts via the device.
88
2D. Contacts
and select from the
available contact menu
options:
䡲 View contact to view the
Contact’s overview
screen.
䡲 Call contact to call a
Contact's available
number.
䡲 Text contact to send the Contact a new text
message.
䡲 Add to favorites to copy the current Contacts entry
to the list within the Favorites tab (page 92).
䡲 Edit contact to edit the currently selected Contacts
entry. (See “Editing a Contacts Entry” on
page 89.)
M580.book Page 89 Monday, April 18, 2011 11:18 AM
Delete contact to erase the currently selected
Contacts entry. (See “Deleting Entries” on
page 91.)
Note: Prior to using the Bluetooth feature, it must first be
enabled, and the recipient’s device must be visible.
Only a Contact’s information can be sent via Bluetooth.
No other file type (video, image, or audio) can be sent
using Bluetooth.
Contacts Entry Options
To display a Contacts entry:
1. Press
and tap
.
2. Touch an entry to display the Contact entry’s
overview screen. This screen contains Name,
History, contacts numbers, email, and linked
contact information.
3. Press
to reveal the context menu specific to
this entry.
4. Tap an available option:
䡲
Edit contact to access the details page for the
entry and begin editing its information.
Share to send the current Contact entry’s
information to an external recipient via either:
● Bluetooth to transmit this contact to another
bluetooth-compatible device.
● Email to attach the contact card to a new
outgoing email (Exchange or Internet).
● Gmail to attach the contact card to a new
outgoing Internet-based email.
䡲 Options to assign a specific Ringtone to the
contact and select whether or not the contact’s
Incoming calls should be sent directly to
voicemail.
䡲 Delete Contact to remove the contact from the list.
䡲
Note: Prior to using this feature, Bluetooth must first be
enabled, and the recipient’s device must be visible.
Editing a Contacts Entry
1. From the Contact’s overview screen, press
and tap Edit contact. Tap an option to begin editing.
䡲
[image icon] to assign a picture to the entry. See
“Assigning a Picture to an Entry” on page 91.
2D. Contacts
89
Contacts
䡲
M580.book Page 90 Monday, April 18, 2011 11:18 AM
䡲
First name/Last name to edit the current name.
䡲
Phone to add or delete a phone number to the
entry. (See “Adding a Number to a Contacts
Entry” on page 90.)
䡲 Email to add or delete an email address.
䡲 Postal address to add a physical mailing address.
䡲 Organization to enter business information such
as organization company name.
䡲 More to add additional categories such as: IM,
Notes, Nickname, and Website.
2. Tap Done to store your updates.
Adding a Number to a Contacts
Entry
1. From the Contact’s overview screen, press
and tap Edit contact.
2. Tap the Phone field and use the onscreen dialpad
to enter the new number.
3. Tap Done to update the new number to the existing
Contacts entry.
90
2D. Contacts
Editing a Contacts Entry’s Number
1. From the Contact’s overview screen, press
and tap Edit contact.
2. Tap an existing phone number field.
Note: Touch and hold the Phone number field to activate the
Edit text menu.
3. Tap
to clear one digit at a time.
4. Re-enter or edit the number using the onscreen
dialpad.
Note: To hide an onscreen keypad, dialpad or keyboard,
press
.
5. Tap Done to update the number to the existing
Contacts entry.
Selecting a Ringer Type for an Entry
Assign a ringer type to a Contacts entry so you can
identify the caller by the ringer type. (See “Ringer
Types” on page 58.)
M580.book Page 91 Monday, April 18, 2011 11:18 AM
and tap Options > Ringtone.
2. Scroll through available ringers. (To hear a sample
ringer, highlight or tap a ringer entry.)
3. Tap OK to save the new ringer type.
Assigning a Picture to an Entry
Assign a picture to display each time a certain contact
calls you.
Assigning a picture via the device:
1. From the Contact’s overview screen, press
and tap Edit contact.
2. Tap a contact image (upper left).
3. Tap Take Photo to take a new photo or Select photo
from Gallery to choose a photo from the Select
picture screen.
4. Touch and drag along the sides of the yellow
border box to begin cropping the desired area,
then tap Save to assign selected picture.
Applying a picture from within your online Gmail:
1. Log into your Gmail account and go to your
Contacts page.
2. Select your Contacts entry (with a checkmark) and
click the image area (Change Picture).
3. Click Browse to locate a local copy of your image.
䡲
You can also choose an image from other
sources such as Picasa® Web.
Contacts
1. From the Contact’s overview screen, press
4. Crop the visible area of your selected picture and
click Apply Changes.
5. Sync your new contact from your online Gmail to
your device. See “Confirming Contact
Synchronization” on page 87.
Deleting Entries
1. From the Contact’s overview screen touch and
hold an entry from the list.
2. From the Contacts Entry context menu, tap
Delete contact.
3. Tap OK to confirm the deletion.
2D. Contacts
91
M580.book Page 92 Monday, April 18, 2011 11:18 AM
Adding Entries to Your Favorites
The Favorites tab is a listing that can help you quickly
access your most used or preferred Contacts entries.
1. Press
and tap
.
2. Touch and hold the entry name from the Contacts
tab listing.
3. From the Contacts Entry context menu, tap Add to
favorites.
Note: Another method to add or remove an entry from your
favorites is to toggle the state of the star icon on the
Contact’s details page (upper-right). Enable to add the
entry to your favorites (star is lit), tap again to remove.
92
2D. Contacts
M580.book Page 93 Monday, April 18, 2011 11:18 AM
2E. Calendar & Tools
Google Calendar is an application that synchronizes
new and existing entries between your device and your
online Google account.
⽧
Before You Begin (page 93)
⽧
Calendar (page 93)
Synchronizing Corporate Calendar Events
⽧
My Files (page 98)
⽧
Clock (page 99)
⽧
Calculator (page 100)
⽧
Updating Your Device Firmware (page 101)
⽧
Updating Your Profile (page 103)
Corporate calendars are not synchronized to your
device by default, this account type must be manually
added. Although we previously described how to add a
corporate account to your list of managed accounts,
this only allows your device to track that account type’s
email parameters and traffic.
⽧
Updating Your PRL (page 103)
⽧
Updating Your Samsung Software (page 103)
Before You Begin
Prior to using Google applications such as calendar,
you will need to have an active Google account
(page 56).
Calendar events must be added and tracked by your
device separately.
To add corporate calendar events to your device’s
managed account tracking:
1. Press
>
Accounts & sync.
and tap
>
2. Tap
within the Corporate account field to
reveal the account’s synchronization settings
screen.
2E. Calendar & Tools
93
Calendar / Tools
Calendar
M580.book Page 94 Monday, April 18, 2011 11:18 AM
3. Tap Sync Calendar to activate the synchronization
of calendar events between your device and the
remote exchange server. A checkmark indicates
the feature is enabled.
To manually sync your calendar events to a managed
corporate account:
1. Press
2. Tap
and tap
>
(Calendar).
. See “Synchronizing Your Corporate
Account” on page 65.
Configuring Calendar Settings
1. Press
2. Tap
and tap
>
(Calendar).
> Settings.
3. Tap an onscreen option:
䡲
Calendars displays the currently managed
accounts. Tap an entry to change the sync state
of the account.
䡲 Calendar sync provides access to the sync
settings screen where you can enable/disable the
sync status of your managed accounts and add
more accounts.
94
2E. Calendar & Tools
Default calendar displays allows you to select the
calendar that automatically displays after you
open the application.
䡲 Default view configures the current Calendar
default view for events. Month is the default.
Choose from: Month, Week, Day or List.
䡲 Day views configures how the available events are
displayed onscreen. Choose from Time grid or
Event list.
䡲 First day of week sets the calendar week to start
with either Sunday or Monday.
䡲 Hide declined events hides (checked) or displays
(unchecked) those events that have been
declined via the calendar application.
䡲 Lock time zone to lock the events within the time
zone you select within the Select time zone option.
䡲 Select time zone to set the time zone you wish to
synchronize with your calendar events.
䡲 Set alerts & notification to select the way your
device reminds you about a set event. Choose
from: Alert, Status bar notification, or Off.
䡲 Vibrate to select whether or not the device
vibrates when initiating an alert.
䡲
M580.book Page 95 Monday, April 18, 2011 11:18 AM
Select ringtone to set the audible sound type
during an alert.
Your Calendar helps organize your time and reminds
you of important events.
and tap
The default view for the Calendar is the Month
view.
䡲 To change the view, tap the available tabs along
the top of the Calendar screen. Choose from
Month, Week, Day, and List.
䡲 Press
to hide any menu options.
䡲
Adding an Event to the Calendar
1. Press
2. Tap a day to which you would like to add an event.
>
(Calendar).
Note: To synchronize calendar events among your Google
and Corporate accounts, make sure they are being
managed by your device (page 64).
3. Tap the Event field and enter a title for the event.
4. Select a From/To date for the event by tapping the
corresponding fields, and adjusting the month, day,
and year by tapping
or
.
䡲 Tap Set when finished.
5. Select a time for the event by tapping the time field
Views
and then adjusting the hour and minute by tapping
or
.
䡲
䡲
Tap the AM or PM button to change the value.
Tap Set when finished.
6. Select a Time Zone.
7. Tap the All day field to assign this as an all day
Calendar Menu Options
event. If assigned as an all day event, the time
fields are removed as options.
2E. Calendar & Tools
95
Calendar / Tools
䡲
M580.book Page 96 Monday, April 18, 2011 11:18 AM
8. Assign the new calendar event to a current
account by tapping the Calendar field and then
selecting an account. For this example we are
choosing a Google.
䡲 My calendar calendar entries are stored locally on
the device and not part of an email account.
䡲 Google/Gmail calendar entries are synchronized
between your device and your online Google
account.
䡲 Corporate calendar entries are synchronized
between your device and either an Exchange
Server or available from within Microsoft®
Outlook®.
䡲 Tap OK when finished.
9. Enter a location for the event in the Location field.
10. Assign participants by either entering the name
directly into the participants field or selecting from
one of the three available sources:
11. Select an alarm time by tapping the Alarm field.
䡲
96
Select None, On time, 5 mins before, 15 mins
before, 1 hour before, 1 day before, 2 days before, 1
week before, or Customize.
2E. Calendar & Tools
䡲
Customize allows you to manually enter a desired
number. Tap Set to complete the custom
assignment.
12. Select a recurrence cycle for the event by tapping
the Repeat field:
Select One-time event, Daily, Every weekday
(Mon-Fri), Weekly (every [day]), Every 2 weeks
([day]), Monthly (every [Number Day]), Monthly (on
day [Number]), and Yearly (on [Month Day]).
䡲
13. Enter a description for the event in the Description
field.
14. Tap Save to store the new event and synchronize it
with your selected account.
Event Reminders
When your device is turned on and you have an event
alarm scheduled, there are several ways your device
alerts you to scheduled events:
䢇 By playing a short beep.
䢇 By illuminating the backlight.
䢇 By indicating a
icon within the Status bar.
M580.book Page 97 Monday, April 18, 2011 11:18 AM
1. Tap the Status bar, then slide your finger down the
screen to open the Notifications panel.
2. Tap the upcoming event name from the onscreen
list to display the event within the Calendar
notifications screen.
3. Tap one of the following options:
䡲
Snooze all to snooze all event reminders for five
minutes.
䡲
Dismiss all to dismiss all event reminders.
䡲
Press
to keep these reminders in place
and close the Notifications panel.
Viewing Events
1. Press
and tap
>
(Calendar).
Once an event has been created, entries are
shown in the default view.
Note: A selected day’s events are also listed at the bottom of
the calendar screen when the Month tab is active. Tap
an event to view its details.
2. To view a Calendar event farther out, tap either
Week or Month.
3. Tap the day for which you would like to view
events. (Your device lists events in chronological
order.)
4. To display an event’s details, tap it from the current
screen.
Going to the Current Day’s Calendar Menu
1. Press
and tap
>
(Calendar).
2. Tap Menu > Today and locate your event.
Editing an Existing Event
1. Press
and tap
>
Calendar / Tools
To view additional options, press the appropriate softkey:
(Calendar).
2. Tap the day for which you would like to edit an
event. (Your device lists events in chronological
order.)
3. Tap the event or events you want to edit.
4. Press
and tap Edit.
5. Make your modifications (event name, location,
participants, alarm, repetition, etc).
6. Tap Save to store the new updates and
synchronize them with your assigned account.
2E. Calendar & Tools
97
M580.book Page 98 Monday, April 18, 2011 11:18 AM
Erasing a Day’s Events
1. Press
and tap
Place a checkmark only on those events you want
deleted.
>
(Calendar).
4. Tap Delete to erase the selected events and then
2. Tap the Day tab on the Calendar screen.
3. Press
synchronize this action with your managed
account.
and tap Delete.
4. Tap Select all to delete all event on this day.
My Files
– or –
Place a checkmark only on those events you want
deleted.
5. Tap Delete to erase the selected events and then
synchronize this action with your managed
account.
Accessing File Viewer
䊳
Erasing All Events
1. Press
and tap
>
(Calendar).
2. From the main Calendar screen, press
and
tap Delete.
3. Tap Select all to delete all events currently available
for this managed account.
– or –
My Files allows you to view a list from which you can
launch a file if the associated application is already on
your device.
Press
and tap
>
(My Files).
Navigation in this viewer works on a hierarchy
structure with folders, subfolders, etc.
Opening Files in File Viewer
1. Press
2E. Calendar & Tools
>
(My Files).
your selected file.
Tap the Up tab to back up into a higher directory.
䡲
98
and tap
2. Tap a folder and scroll down or up until you locate
M580.book Page 99 Monday, April 18, 2011 11:18 AM
Press
and tap the View by to change the
way the files are displayed onscreen. Choose
from: List, List and details, or Thumbnail.
● Press
for these additional options:
Share, Create folder, Delete, View by, List by,
and More (Move, Copy, Rename, Bluetooth
visibility, and Settings).
3. Once you have located your file, tap the file name
to launch the associated application.
䡲
3. Tap the Time field to begin adjustment of the alarm
time.
Adjust the hour and minute by tapping either
or
.
䡲
䡲
䡲
Clock
Tap the AM or PM button to change the value.
Tap Set when finished.
Note: The number of hours and minutes left before the alarm
Your device comes with a built-in alarm clock that has
multiple alarm capabilities. There is no limit to the
number of alarm events you can create.
1. Press
Activate the alarm by tapping its adjacent field
and placing a checkmark next to the select alarm
event.
and tap
>
(Clock).
Note: Upon your first launch of the Clock application, three
alarm presets are available for you to customize. By
default, these alarms are turned off.
2. Tap the time field of a default alarm event.
Note: A new alarm can also be created from the Alarm page
by pressing
> Add alarm.
goes off is briefly displayed onscreen after you set the
new alarm time.
4. Tap the Repeat field to select a repeating status for
the alarm.
Place a checkmark adjacent to the desired
repetition days Monday, Tuesday, Wednesday,
Thursday, Friday, Saturday or Sunday and tap OK.
䡲
5. Tap Ringtone to select an audio ringtone that will
sound with the alarm.
Tap a ringtone to hear an audio sample.
䡲 Tap OK to accept the ringtone assignment.
䡲
2E. Calendar & Tools
99
Calendar / Tools
䡲
M580.book Page 100 Monday, April 18, 2011 11:18 AM
6. Tap Vibrate to add a vibration feature to the alarm.
7. Select a unique name for this alarm event by
tapping the Label field, entering a new label, and
tapping OK.
8. Tap Done to store the new alarm event.
Note: To allow the alarm to sound even while the device is in
silent mode, press
and tap Settings, then activate
the Alarm in silent mode field.
Press
> Alarms.
3. Tap the onscreen alarm clock.
4. Scroll your finger across the bottom field to
temporarily view each selection.
5. Tap the desired image to activate the new clock
face.
Calculator
To delete an Alarm event:
1. Press
and tap
>
(Clock).
1. Press
2. Tap
> Alarms.
4. From the onscreen context menu, tap Delete alarm.
To customize the onscreen clock:
and tap
2. Tap
– or –
100
>
(Calculator).
2E. Calendar & Tools
an onscreen key.
In both Portrait mode and Landscape mode,
to clear all
touch and hold CLEAR or
numbers.
䡲
3. Touch and hold a desired alarm event.
1. Press
and tap
2. Enter numbers using your keyboard or by tapping
– or –
Press
Your device comes with a built-in calculator.
>
Note: Tapping CLEAR only deletes one number at a time.
(Clock).
䡲
Press
and tap Advanced panel to access
more advanced features such as sin (Sine), cos
(Cosine), tan (Tangent), etc.
M580.book Page 101 Monday, April 18, 2011 11:18 AM
4. Tap Download and follow the onscreen
Updating Your Device Firmware
instructions. (
appears within the Status bar to
indicate the device is downloading the necessary
files.)
You can update your device's software using the
Update Firmware option.
5. Touch Restart & install to complete the process.
Updating Your Device Firmware OTA
Over the Air (OTA) applies to those software updates
that can downloaded and installed wirelessly over the
network directly to your device.
>
and tap
About phone > System Updates.
1. Press
2. Tap Update Firmware. (Your device automatically
downloads and installs any available updates. You
may be required to power your device off and
back on to complete the software upgrade.)
– or –
from the Status bar area.
2. Touch and hold the Status bar, then slide your
finger down the screen.
3. Tap
and then tapping
Confirm Your Current Device Firmware
>
1. Locate the System Update Available icon (
Home screen by pressing
Notifications.
)
>
and tap
> About phone.
2. Scroll to the bottom of the page and locate the
Baseband version read-only field. The firmware
version will be in the format of S:M580.04 x.EC02.
Back up your Data Prior to Update
Calendar / Tools
1. Press
Note: The Notifications panel can also be opened on the
The firmware upgrade process will Erase ALL User Data
from your device.
Please ensure that all critical information has been
backed up before applying this upgrade.
to open the System updates screen.
2E. Calendar & Tools
101
M580.book Page 102 Monday, April 18, 2011 11:18 AM
As an added precaution, to preserve any data on your
microSD card, please remove it from your device prior
to starting the update process. See “Removing the
microSD Card” on page 109.
To backup your Gmail information:
1. Press
>
and tap
> Accounts &
sync. See “Synchronizing Accounts” on page 64.
2. Tap the Auto-sync option to enable the feature
(checkmark). See “Configuring Data
Synchronization Settings” on page 164.
䡲 If the Auto-sync option is on, email, Calendar and
Contacts automatically synchronize whenever a
change is made.
䡲 If the Auto-sync option is off, simply tap
within the account field to reveal the account’s
synchronization settings screen.
To back up your Exchange Mail information:
1. Press
>
and tap
>
Accounts & sync. See “Corporate Email (Outlook)”
on page 159. See “Synchronizing Accounts” on
page 64.
102
2E. Calendar & Tools
2. Tap
within the Corporate account field to
reveal the account’s synchronization settings
screen.
3. Toggle the onscreen checkmark to manually
synchronize the desired parameters (Contacts or
Calendar).
To backup stored text messages:
1. Press
and tap
>
.
2. Select the text message from the list to view the
message thread.
3. Touch and hold on a text message from the string
Message Options context menu appears.
4. Tap Forward and enter a recipient’s phone number.
To backup your Google applications:
Your Google™ application purchases are reloaded
remotely and can be re-installed after the update is
applied. See “Using the Android Market” on page 164.
1. Log into your Google account via the device.
2. Press
and tap
3. Press
and tap Downloads.
>
.
M580.book Page 103 Monday, April 18, 2011 11:18 AM
Google applications and choose the one you wish
to reinstall.
5. Follow the onscreen instructions.
Updating Your Profile
This option allows you to automatically update your
online user profile information. If you choose to change
your user name and select a new one online, you must
then update the user name on your device.
1. Press
>
and tap
>
About phone > System Updates > Update Profile.
2. Follow the onscreen instructions.
Note: If your data services or account synching ever seem to
go out unexpectedly, use this feature to reconnect with
the network.
Updating Your PRL
This option allows you to download and update the
preferred roaming list (PRL) automatically.
1. Press
>
and tap
>
About phone > System Updates > Update PRL.
2. Follow the onscreen instructions.
Updating Your Samsung Software
This option allows you to download and update the
latest Samsung software automatically.
1. Press
>
and tap
>
About phone > System Updates > Update Samsung
Software.
2. Follow the onscreen instructions.
2E. Calendar & Tools
Calendar / Tools
4. Scroll through the list of previously downloaded
103
M580.book Page 104 Monday, April 18, 2011 11:18 AM
Activating Voice Dialer
2F. Voice Services
䊳
Press
and tap
>
(Voice Dialer).
– or –
⽧
Voice Dialing (page 104)
⽧
Opening Menus With Voice Dialer (page 106)
⽧
Text-to-Speech (page 107)
⽧
Voice Search (page 108)
Important: The Voice Control (Speech to Action) feature will
not launch if you are currently in an active menu.
Voice Dialing
You can use your device’s built-in automatic speech
recognition (ASR) software, called Voice Dialer, to dial a
phone number in your Contacts or to launch phone
functions. All you have to do is to talk into the phone,
and ASR will recognize your voice and complete tasks
by itself.
104
2F. Voice Services
Press and hold the voice dialer key (
located on the side of the device.
The screen displays
“Listening” and the phone
prompts you to say the
name of the command
you want to use. To
complete your task, simply
follow the voice prompts
or touch an onscreen
option.
)
M580.book Page 105 Monday, April 18, 2011 11:18 AM
Tip: Use Voice Dialer in a quiet environment so it can
accurately recognize your commands.
Making a Voice Call With Voice Dialer
1. Press
and tap
>
(Voice Dialer).
2. When you see “Listening,” say “Call” followed by
the name and the label for the phone number you
wish to call. For example, say “Call John Smith
Mobile.” The device dials the number stored for the
contact “John Smith” with the label “Mobile.”
䡲 You can also touch the onscreen Call <Name or
#> field to activate the function.
䡲 If the location is not recognized or the name does
not have a phone number stored in Contacts,
your phone will an onscreen list of possible
options.
䡲 If a name has only a single number, or if you
know the name but are not sure which number to
call, say “Call” followed by the name only. For
example, say “Call John.” If the name is
recognized and there is only one phone number
for the name, your device immediately places the
call.
– or –
Press and hold the voice dialer key (
located on the side of the device.
)
2F. Voice Services
Voice Services
Available ASR commands include:
䢇 Call <Name or #> to call an entry in your Contacts
list or a spoken phone number. (See “Making a
Voice Call With Voice Dialer” on page 105.)
䢇 Dial <Name or #> to call an entry in your Contacts
list or a spoken phone number.
䢇 Redial <Name or #> to callback an entry in your
Contacts list or a spoken phone number.
䢇 Open <Menu> to jump directly to menu items or
applications. (See “Opening Menus With Voice
Dialer” on page 106.)
105
M580.book Page 106 Monday, April 18, 2011 11:18 AM
Calling a Phone Number With Voice Dialer
1. Press
and tap
>
(Voice Dialer).
– or –
Press and hold the voice dialer key (
located on the side of the device.
)
2. When you see “Listening,” say “Call” followed
immediately by a valid string of digits to be dialed,
for example, say “Call 555 555 5555.”
3. If the location is not recognized or the name does
not have a phone number stored in Contacts, your
phone will an onscreen list of possible options.
Speak naturally and clearly and remember to speak
one digit at a time. For example, 1-800 should be
pronounced “One Eight Zero Zero.”
106
2F. Voice Services
Opening Menus With Voice Dialer
You can jump directly to many menu items or
applications by saying “Go to” followed by a menu
option.
1. Press
and tap
>
(Voice Dialer).
– or –
Press and hold the voice dialer key (
located on the side of the device.
2. When you see
“Listening,” say “Open.”
A list of valid actions is
displayed.
3. Tap an action, the
device opens the
selected menu.
)
M580.book Page 107 Monday, April 18, 2011 11:18 AM
options.
Text-to-Speech
Allows the device to provide a verbal readout of
onscreen data such as messages and incoming caller
information (based on Caller ID).
Text-to-Speech Settings
1. Press
>
and tap
>
Voice input & output > Text-to-speech settings.
2. Configure the available options to alter the settings
associated with this feature:
Listen to an example plays a short example of
what the text-to-speech feature will sound like on
your device when activated.
䡲
Always use my settings accepts the overriding of
application settings with those configured within
this text-to-speech settings screen. If enabled, and
available as a feature, your device will default to
using the text-to-speech feature.
䡲 Default Engine sets the speech synthesis engine
to be used for spoken text.
䡲 Install voice data confirms the installation of
necessary data required for voice synthesis.
䡲 Speech rate adjust the rate at which onscreen text
is spoken by the device. Choose from: Very slow,
Slow, Normal, Fast, and Very fast.
䡲 Language assigns the language used by the
verbal readout. Choose from
English (United States) or Spanish (Spain).
䡲 Pico TTS to install additional language
applications.
3. Press
to return to the previous screen.
䡲
2F. Voice Services
Voice Services
Tip: Tap and scroll through the onscreen list to reveal more
107
M580.book Page 108 Monday, April 18, 2011 11:18 AM
Voice Search
Functions in much the same manner as the Voice
Dialer. This function uses built-in voice recognition
software to listen to your spoken words, convert those
to text, then launch a Google search using that text.
1. Press
and tap
>
(Voice Search).
2. Speak clearly into the microphone. If an error
occurs, tap Speak again.
3. From the onscreen Google search page, tap a
matching entry.
108
2F. Voice Services
M580.book Page 109 Monday, April 18, 2011 11:18 AM
Important: Camera, Camcorder, and Music playback
⽧
Your Device’s microSD Card and Adapter (page 109)
⽧
Connecting Your Device to Your Computer (page 111)
⽧
microSD Card Settings (page 112)
⽧
Important Connection Information (page 113)
microSD Card
features are dependant on having a microSD
memory card installed. Although the Samsung
Replenish™ comes with a pre-installed 2GB card,
it can support microSD cards of up to 32GB.
2G. microSD Card
Removing the microSD Card
1. Locate the microSD card slot along the side of the
device.
2. Firmly press the card into the slot and release it.
The card should pop partially out of the slot.
Your Device’s microSD Card and
Adapter
3. Remove the card from the slot.
4. Replace the microSD card cover over the open
slot.
The microSD Card
Your device is equipped with a preinstalled 2GB
microSDTM (Secure Digital) memory card. It allows you
to store images, videos, music, and voice data in your
device.
Note: You can easily damage the microSD card and its
adapter by improper operation. Please be careful when
inserting, removing, or handling it.
2G. microSD Card
109
M580.book Page 110 Monday, April 18, 2011 11:18 AM
Re-inserting the microSD Card
microSD card Slot
Refer to the procedures in the previous section.
Note: Make sure the microSD card's gold contacts are facing
down.
microSD Icon Indicators
The following icons show your microSD card
connection status at a glance:
Incorrect
Correct
WARNING: Do not over-insert the card as this can damage
the contact pins.
Note: Be sure to use only recommended microSD cards
(<32GB). Using non-recommended microSD cards
could cause data loss and damage your device.
WARNING: The microSD card and its adapter can be easily
damaged by improper operation. Please be
careful when inserting, removing, or handling it.
110
2G. microSD Card
– card has been unmounted (released from use)
from the device.
– card is being prepared for use and for
mounting.
WARNING: DO NOT remove a microSD card while the
device is accessing or transferring files. Doing so
will result in loss or damage of data. Make sure
your battery is fully charged before using the
microSD card. Your data may become damaged
or lost if the battery runs out while you are using
the microSD card.
M580.book Page 111 Monday, April 18, 2011 11:18 AM
The supplied microSD adapter allows you to use
microSD cards in other SD-compatible devices, like
computers, cameras, and printers. Before using the
microSD card with an SD-compatible device, you will
need to insert the microSD card into the microSD
adapter.
To insert the microSD card into the microSD adapter:
䊳
With the label side of the microSD card facing up,
insert the card into the supplied microSD adapter,
and gently slide the card until it is fully inserted.
To remove the microSD card from the microSD adapter:
䊳
Hold the front edge of the microSD card, and
gently pull it out to remove it from the adapter.
Write Protection
The microSD adapter has a built-in Write Protection
lock to prevent accidental overwriting or removal of
your data when the microSD card and adapter are
inserted in another device.
䊳
Slide the Write Protection lock tab down into the
“Lock” position to prevent overwriting of data. To
allow data to be added or removed from the
microSD card, slide the Write Protection lock tab
up into the normal position.
microSD Card
microSD Adapter
Connecting Your Device to Your
Computer
Before using your device’s mass storage capabilities,
you need to prepare your device’s data services to
synchronize with your desktop or laptop computer.
Once you have connected the device to the computer,
you can transfer your data to or from the microSD card.
Before You Begin
Here is what you will need to have before you can
successfully establish a connection between your
Samsung Replenish™ and PC.
䡲 microSD card (internally installed prior to start)
䡲 compatible USB cable
2G. microSD Card
111
M580.book Page 112 Monday, April 18, 2011 11:18 AM
1. With the microSD card installed, connect your
device to your computer using a compatible USB
cable. (Wait for the connection to be completed.
When connected, the host computer will
automatically detect your device.)
To remove the connection:
䊳
When you have finished transferring data, click the
USB device icon on your computer's taskbar, and
follow the onscreen instructions to safely unplug
the USB cable.
2. The USB icon (
) now appears in the top left
Notifications area on your device.
microSD Card Settings
3. Touch and drag down the Status screen to reveal
the Notifications page (or from the Home screen
press
and tap Notifications).
4. Tap USB connected > Turn on USB storage to copy
files between your computer and your device's
microSD card.
Important: The internal microSD card MUST BE MOUNTED
before your computer detects it and your are able
to communicate with it.
5. Locate the newly created Drive letter on your
computer. You can now begin to use the microSD
card as a storage device.
112
2G. microSD Card
Viewing Memory in the microSD Card
The Samsung Replenish™ allows you to review the
memory allocation of both your device’s internal
storage and that of the microSD card.
1. Press
>
and tap
SD card & phone storage.
>
2. Review the available information.
䡲
The storage capacity page is divided into two
sections: SD card and Internal phone storage.
3. Press
to return to the previous page.
Formatting the microSD Card
Important Connection Information
Formatting a microSD card permanently removes all
files stored on the card.
䢇
1. Press
>
and tap
SD card & phone storage.
>
䢇
2. Touch Unmount SD card > OK to release the
microSD card from its use by the device. The
icon appears within the Notifications area to
indicate an unmounted internal microSD card.
3. Once released, tap Format SD card > Format SD
䢇
card > Erase everything.
䡲
Once completely formatted, the card is
automatically re-mounted (reconnected for use by
the device).
Important: The formatting procedure erases all the data on
the microSD card, after which the files CANNOT
be retrieved. To prevent the loss of important data,
please check the contents before you format the
card.
䢇
To avoid loss of data, DO NOT remove the USB
cable, the microSD card, or the battery while
accessing or transferring files.
DO NOT use your computer to change or edit folder
or file names on the microSD card, and do not
attempt to transfer large amounts of data from the
computer to the microSD card. Doing so may cause
the microSD card to fail.
DO NOT turn off or restart your computer, or put it
into standby mode, while using a mass storage
device. Doing so will result in loss or damage of data.
The internal microSD card can only be mounted for
use by either the device or a connected computer.
Prior to accessing the card via a different method, it
must first be unmounted from its current device
(phone or computer-USB).
Important: The internal microSD card can only share a
connection with one device at a time, either your
device or your computer (via its USB connection),
not both. You can not browse the contents of the
card via your device if they are currently being
browsed via your computer.
2G. microSD Card
113
microSD Card
M580.book Page 113 Monday, April 18, 2011 11:18 AM
M580.book Page 114 Monday, April 18, 2011 11:18 AM
2H. Camera
⽧
Taking Pictures (page 114)
⽧
Recording Videos (page 118)
Note: The storage card that comes installed on your device
allows you to use the camera and camcorder features.
All pictures and videos are stored on the internal 2GB
microSD card. The Samsung Replenish™ supports
SDHC cards of up to 32GB.
Taking Pictures
Taking pictures with your device’s built-in camera is as
simple as choosing a subject, pointing the lens, and
pressing a button.
To take a picture:
1. Press and hold the camera key (
the side of the device.
– or –
114
2H. Camera
) located on
M580.book Page 115 Monday, April 18, 2011 11:18 AM
2. Using the device’s display screen as a viewfinder,
aim the camera lens at your subject.
3. Press
or tap
until the shutter sounds.
(Your device automatically saves the picture to the
DCIM folder on the microSD card.)
Camera Settings
1. From camera mode (
), you can also move
the camera mode slider (right of the screen) to the
camcorder position (
) (to switch from
camera to camcorder and record videos).
– or –
Touch the camera’s side panel and adjust any of
the following options:
䡲 Camera settings to access camera hardware
settings:
●
Review Mode to change the length of time the
recently-taken photo displays onscreen before
returning to Camera Mode. Choose from:
2 seconds or Off.
● Brightness to set the value of light that displays
within the picture color.
● Night Mode to select a camera setting for
better image capture under a darker lighting
environment.
● Picture size to set the size of your image.
Choose from: 2M Pixels, 1M Pixels, VGA Pixels,
or QVGA.
● Picture quality to set the image quality for your
image. Choose from: Super fine, Fine, or
Normal.
● Color effect to apply different color effects onto
images. Choose from: None (default), Mono,
Sepia, Negative, or Aqua.
● Camera Settings to restore the settings to the
default parameters.
䡲 Store location to store the actual location (latitude
and longitude) where the image was taken so the
photo can later be displayed on Google Maps or
used in other social applications.
2H. Camera
115
Camera
Press
and tap
>
to activate
camera mode. (Additional camera options are
available through the camera settings page. See
“Camera Settings” on page 115 for more
information.)
M580.book Page 116 Monday, April 18, 2011 11:18 AM
䡲
White balance to compensate for color differences
found within different lighting conditions. Choose
from: Auto (default), Incandescent, Daylight,
Fluorescent, or Cloudy.
䡲 Zoom to adjust the distance of your image.
Choose from: 4x, 3x, 2.3x, 1.7x, 1.3x, or 1x.
䡲 Select Camera to toggle between the Back and
Front-facing camera modes.
View Your Pictures
and tap
>
.
– or –
While in camera mode, press
Gallery.
and tap
2. Select a location and tap an image to view your
picture.
3. Press
116
to return to the previous screen.
2H. Camera
1. Press
and tap
>
.
– or –
While in camera mode, press
Gallery.
and tap
2. Select a location and tap an image to view your
picture.
3. Press
The Gallery is where you can access the gallery of
stored camera images.
1. Press
Camera Image Settings
or Menu to reveal gallery-specific
options, such as:
䡲 Share to activate the picture share menu from
which you can choose to share the current image
via one of many options:
● Bluetooth to send the image to another device
via Bluetooth.
● Gmail to attach your image to a new Gmail
email message.
● Messaging to insert your image into a new
outgoing MMS message (multimedia text
message).
M580.book Page 117 Monday, April 18, 2011 11:18 AM
4. Press
Assigning Pictures
After taking a picture, assign it as a picture ID for a
Contacts entry or as the Home screen background
image (wallpaper).
1. Press
and tap
.
>
2. From Camera pictures gallery, tap an image icon to
open the image.
3. With the picture displayed, press
Camera
Picasa to upload your current image to your
Picasa account. Tap Upload to complete the
process.
䡲 Delete to delete the selected image or images.
䡲 More to access additional image options such as:
Details, Set as, Crop, Rotate left and Rotate right.
● Details to display image details such as file
name, file size, resolution and date taken.
● Set as to assign the current image to either a
current Contact icon (display image) or as
the Wallpaper (Home screen background)
(page 117).
● Crop to crop the current image. Crop the
image and tap Save to a new version of the
original.
● Rotate left to rotate the current image
counterclockwise.
● Rotate right to rotate the current image
clockwise.
●
and tap
More > Set as, and select an option:
Contact icon to assign the picture to a Contacts
entry as a picture ID. Tap an entry from the
Contacts tab, crop the image and tap Save to
assign the picture.
䡲 Wallpaper to assign the picture as a background
image, crop the image and tap Save to assign the
picture.
䡲
to return to the previous screen.
2H. Camera
117
M580.book Page 118 Monday, April 18, 2011 11:18 AM
5. Press
Recording Videos
or tap
to stop recording. (Your
device automatically saves the video within the
DCIM folder on the microSD card.)
In addition to taking pictures, you can record, view, and
send videos with your device’s built-in video camera.
1. Press and hold the camera key (
) located on
the side of the device.
View Your Videos
The Gallery is where you can access the gallery of
stored videos.
– or –
>
to activate
Press
and tap
camera mode. (Additional camera options are
available through the camera settings page. See
“Camera Settings” on page 115 for more
information.)
2. Touch and slide the camera mode slider up to
camcorder mode (
). Using the device’s
display screen as a viewfinder, aim the camera
lens at your subject.
1. Press
4. Press
or tap
2H. Camera
and tap
Note: Press
twice to return to the previous screen
during video playback.
Camcorder Settings
From camera mode (
), move the camera
mode slider (right of the screen) to the camcorder
position (
) (to switch from camera to
camcorder and record videos).
– or –
118
.
2. Select a location and tap a video to view it.
䊳
to begin recording.
>
While in camcorder mode, press
Gallery.
3. Select the Recording Mode. Choose from High
(30m) or MMS (Low, 30s).
and tap
– or –
Touch the camera’s side panel and adjust any of
the following options:
䡲 Camcorder settings to access camcorder
hardware settings:
● Color effect to apply different color effects onto
videos. Choose from: None (default), Mono,
Sepia, Negative, or Aqua.
● Camera Settings to restore the settings to the
default parameters.
䡲 White balance to compensate for color differences
found within different lighting conditions. Choose
from: Auto (default), Incandescent, Daylight,
Fluorescent, or Cloudy.
䡲 Video quality to set the length for your video.
Choose from High (30m) or MMS (Low, 30s).
Camcorder Video Settings
1. Press
and tap
>
Press and hold the video icon to display the
following video menu context menu options:
䡲 Share to activate the video share menu from
which you can choose to share the current image
via one of many options:
● Bluetooth to send the video to another device
via Bluetooth.
● Gmail to attach your video to a new Gmail
email message.
● Messaging to attach your video to a new MMS
message.
● YouTube to upload your current video file to a
YouTube page. Tap Upload to complete the
process.
䡲 Delete to delete the current video.
䡲 More to access the video Details, such as file
name, file size, resolution and date taken.
.
2. From Camera gallery, tap a video icon to begin
video playback.
– or –
2H. Camera
119
Camera
M580.book Page 119 Monday, April 18, 2011 11:18 AM
M580.book Page 120 Monday, April 18, 2011 11:18 AM
Turning Bluetooth On and Off
2I. Bluetooth
⽧
Turning Bluetooth On and Off (page 120)
⽧
Using the Bluetooth Settings Menu (page 121)
⽧
Pairing Bluetooth Devices (page 122)
⽧
Sending Contacts via Bluetooth (page 124)
⽧
Disconnecting Bluetooth Connection During an Active
Call (page 125)
About Bluetooth
Bluetooth is a short-range communications technology
that allows you to connect wirelessly to a number of
Bluetooth devices, such as headsets and hands-free
car kits, and Bluetooth-enabled handhelds, computers,
printers, and wireless devices. The Bluetooth
communication range is usually up to approximately
30 feet.
By default, your device’s Bluetooth feature is set to Off.
Turning Bluetooth on activates the internal Bluetooth
antenna.
Note: Activating Bluetooth can drain your battery faster and
reduce your available usage times. It is recommended
that if you do not need it active, turn it off.
It is also recommended to turn off your Bluetooth within
locations that prohibit its use.
To turn Bluetooth on:
1. Press
>
and tap
Wireless & networks.
2. Tap the Bluetooth field to activate the feature
(checkmark indicates active). When active,
appears within the Status area.
To turn Bluetooth off:
䊳
Press
>
and tap
Wireless & networks > Bluetooth.
䡲
120
2I. Bluetooth
>
>
Tap to remove the green checkmark and
deactivate Bluetooth.
M580.book Page 121 Monday, April 18, 2011 11:18 AM
Bluetooth Status Indicators
The following icons show your Bluetooth connection
status at a glance:
– Bluetooth is active
– Bluetooth is connected (paired) and
communicating
[no icon] – Bluetooth is disabled (default status)
To access the Bluetooth Settings menu:
1. Press
>
and tap
>
Wireless & networks > Bluetooth settings.
2. Set your Bluetooth options: Device name,
Discoverable, and Scan for devices.
Bluetooth Active
Using the Bluetooth Settings Menu
Bluetooth Settings
Bluetooth
The Bluetooth settings menu allows you to set up many
of the characteristics of your device’s Bluetooth service,
including:
䢇 Entering or changing the name your device uses for
Bluetooth communication and description
䢇 Setting your device’s visibility (or “discoverability”) for
other Bluetooth devices
䢇 Displaying your device’s Bluetooth address
Bluetooth Phone
Bluetooth Stereo
Headset
Bluetooth Computer
2I. Bluetooth
121
M580.book Page 122 Monday, April 18, 2011 11:18 AM
To change your Bluetooth name:
Pairing Bluetooth Devices
1. Verify your Bluetooth is active.
2. Tap Device name and enter a new name to
complete the renaming process.
To make your device visible:
1. Verify your Bluetooth is active.
2. From the Bluetooth settings page, tap Discoverable.
䡲
Making your device discoverable allows it to be
detected by other devices for pairing and
communication.
Note: Your device is visible for up to 120 seconds
(2 minutes). This value appears as a countdown within
this field.
To scan for Bluetooth devices:
1. Verify your Bluetooth is active.
2. From the Bluetooth settings page, tap Scan for
devices to search for visible external Bluetooth-
compatible devices such as Headsets, devices,
printers, and computers.
122
2I. Bluetooth
Paired Devices
The Bluetooth pairing process allows you to establish
trusted connections between your device and another
Bluetooth device. When you pair devices, they share a
passkey, allowing for fast, secure connections while
bypassing the discovery and authentication process.
To pair your device with another Bluetooth device:
1. Verify your Bluetooth is active.
2. From the Bluetooth settings page, tap Discoverable.
Your device must be visible to successfully pair
with an external device.
3. Tap Scan for devices. (Your device will display a list
of discovered in-range Bluetooth devices.)
4. Tap a device from the list to initiate pairing.
5. Enter the passkey or PIN code and tap Done > OK.
6. The external device will then have to also accept
the connection and enter your device’s PIN code.
M580.book Page 123 Monday, April 18, 2011 11:18 AM
Once successfully paired to an external device,
appears within the Status area.
Note: Due to different specifications and features of other
Bluetooth-compatible devices, display and operations
may be different, and functions such as transfer or
exchange may not be possible with all Bluetoothcompatible devices.
Note: Pairing between two Bluetooth devices is a one-time
process. Once a pairing has been created, the devices
will continue to recognize their partnership and
exchange information without having to re-enter a
passcode again.
To disconnect a paired device:
Disconnecting a paired device breaks the connection
between the device and your Samsung Replenish™,
but retains the knowledge of the pairing. At a later point
when you wish to reconnect the device, there is no
need to set up the connection information again.
1. Verify your Bluetooth is active.
3. Tap OK to confirm disconnection.
– or –
From the Bluetooth settings page, touch and hold
the name of the previously paired device, and
select Disconnect.
Note: Disconnections are manually done but often occur
automatically if the paired device goes out of range of
your Samsung Replenish™ or it is powered off.
To delete a paired device (unpair):
Deleting a device from your list removes its “connection
record” and upon reconnection would require that you
re-enter all the previous pairing information.
1. Verify your Bluetooth is active.
2. From the Bluetooth settings page, touch and hold
the name of the previously paired device (from the
bottom of the page). This opens the connected
device’s menu options.
Bluetooth
䡲
3. Tap Disconnect & unpair to confirm deletion.
2. From the Bluetooth settings page, touch the
previously paired device (from the bottom of the
page).
2I. Bluetooth
123
M580.book Page 124 Monday, April 18, 2011 11:18 AM
To access a paired device’s settings:
1. Press
1. Verify your Bluetooth is active.
tap
2. From the Bluetooth settings page, touch and hold
the name of the previously paired device.
3. Tap Options... and configure the desired options.
4. Press
to return to the previous page.
Sending Contacts via Bluetooth
Depending on your paired devices’ settings and
capabilities, you may be able to send pictures,
Contacts information, or other items using a Bluetooth
connection.
Note: Prior to using this feature, Bluetooth must first be
enabled, and the recipient’s device must be visible.
Only a Contact’s information can be sent via Bluetooth.
No other file type (video, image, or audio) can be sent
using Bluetooth.
Note: If no devices are detected, tap Scan devices to begin a
new search.
124
2I. Bluetooth
and
.
2. Tap a contact entry to
which you want to send
information via
Bluetooth.
3. Press
and tap >
Share > Bluetooth.
4. Tap a paired device.
䡲
The external Bluetooth
device must be visible
and communicating for
the pairing to be
successful.
M580.book Page 125 Monday, April 18, 2011 11:18 AM
Disconnecting Bluetooth
Connection During an Active Call
During an active call, where the audio is being
routed through a connected Bluetooth device
(headset or hands-free connection), tap Bluetooth
to route the device’s audio through the connected
Bluetooth headset (On) or through the speaker
(Off).
䡲 When the call is routed to a Bluetooth headset,
the current call area is surrounded by a blue box,
the Bluetooth button indicates it’s on, and shows
).
the Bluetooth call icon (
䡲 When turned off, the call is routed through either
the earpiece or speaker, the call area is
surrounded by a green box, the Bluetooth button
indicates its off, and shows (
).
Bluetooth
䊳
Note: Communication can be toggled between the Bluetooth
headset and the device speaker by tapping the
Headset button On or Off.
2I. Bluetooth
125
M580.book Page 126 Monday, April 18, 2011 11:18 AM
M580.book Page 127 Monday, April 18, 2011 11:18 AM
Section 3
Sprint Service
M580.book Page 128 Monday, April 18, 2011 11:18 AM
3A. Sprint Service:
The Basics
⽧
Voicemail (page 128)
⽧
Text Messaging (SMS) (page 129)
⽧
Multimedia Messaging (MMS) (page 131)
⽧
Caller ID (page 135)
⽧
Call Waiting (page 136)
⽧
Making a 3-Way Call (page 137)
⽧
Call Forwarding (page 137)
⽧
Roaming (page 138)
Voicemail
Setting Up Your Voicemail
Your phone automatically transfers all unanswered
calls to your voicemail, even if your phone is in use or
turned off. You should set up your Sprint Voicemail and
personal greeting as soon as your phone is activated.
128
3A. Sprint Service: The Basics
Always use a password to protect against unauthorized
access.
1. Press and hold
.
2. Follow the system prompts to:
Create your password.
Record your name announcement.
䡲 Record your greeting.
䡲
䡲
Note: Voicemail Password
Sprint strongly recommends that you create a
password when setting up your voicemail to protect
against unauthorized access. Without a password,
anyone who has access to your phone is able to
access your voicemail messages.
Voicemail Notification
There are several ways your phone alerts you to a new
message:
䢇 By displaying a message on the screen.
䢇 By sounding the assigned ringer type.
䢇 By the LED blinking red.
䢇 By displaying
at the top of your screen.
M580.book Page 129 Monday, April 18, 2011 11:18 AM
New Voicemail Message Alerts
Retrieving Your Voicemail Messages
When you receive a new voice message, your phone
alerts you and prompts you to call your voicemail.
You can review your messages directly from your
wireless phone or from any other touch-tone phone. To
dial from your wireless phone, either speed dial your
voicemail or use the menu keys.
䊳
Press and hold
.
Note: When you are roaming off the Nationwide Sprint
Network, you may not receive notification of new
voicemail messages. Sprint recommends that you
periodically check your voicemail by dialing your tendigit wireless phone number. When your voicemail
answers, press
and enter your passcode.
Roaming rates apply when you access voicemail while
roaming off the Nationwide Sprint Network.
Your phone accepts messages even when it is turned
off. However, your phone notifies you of new messages
only when it is turned on and you are in a Sprint service
area.
Using One-Touch Message Access
䊳
Press and hold
voicemail box.)
. (Your phone will dial your
Text Messaging (SMS)
With text messaging (SMS), you can send and receive
instant text messages between your wireless device
and another messaging-ready phone. When you
receive a new message, it will automatically display on
your device’s screen.
Messaging is available via the Messaging application
in your Applications screen. This icon (
) appears
in Status bar area when a new text message is
received.
3A. Sprint Service: The Basics
Sprint Service
To call your voicemail:
129
M580.book Page 130 Monday, April 18, 2011 11:18 AM
Note: See your service plan for applicable charges for text
messaging and SMS voice messaging.
Composing Text Messages
1. Press
and tap
2. Press
and tap Compose.
>
.
Note: From the Messages screen, you can also touch New
message to begin creating a new outgoing message.
3. Tap the To field and enter the recipient’s phone
number or email information using either the
onscreen or QWERTY keyboards.
䡲 Contacts as you enter either a phone number or
email address, if the information matches a
current contact’s entry information, you will see a
match. When you see a match, touch the
associated name to complete the addressing.
䡲 Mobile to use the keypad to enter a wireless
phone number directly.
䡲 Email to enter the recipient’s email address.
– or –
130
3A. Sprint Service: The Basics
Touch and hold the To field to reveal the Input
method context menu.
䡲 Android keyboard to continue using the onscreen
keyboard.
4. Tap a matching entry from the onscreen
drop-down list. This list is populated by matches
found from your managed accounts.
5. Touch the Type to compose field and enter your
message.
6. Insert an Emoticon or a Smiley.
䡲
To enter a smiley from the onscreen keyboard,
and tap Insert smiley or press
press
and
from the QWERTY keyboard.
䡲
Make a selection from the onscreen list to then
insert it into your current message.
7. Review your message and tap Send.
M580.book Page 131 Monday, April 18, 2011 11:18 AM
Accessing Text Messages
䡲
To read an SMS Text message:
When you receive a text message, you will see it
listed within the Messaging screen. Touch the
message or use your Navigation keys to open it
and then scroll down and view its entire content.
Multimedia Messaging (MMS)
With multimedia messaging (MMS), you can send and
receive instant text messages that contain text, pictures,
audio, recorded voice, or a picture slideshow.
To reply to a text message:
1. While the message is open, tap the Type to
compose field and then type your reply message.
2. Compose your reply or use the preset messages
or icons.
To type a message, use your keypad to enter your
message. (See “Entering Text with the Onscreen
Keyboard” on page 49.)
䡲
3. Insert an Emoticon or a Smiley.
䡲
To enter a smiley from the onscreen keyboard,
and tap Insert smiley or press
press
and
from the QWERTY keyboard.
Messaging is available via the Messaging application
in your Applications screen.
Note: See your service plan for applicable charges for text
messaging and MMS voice messaging.
Composing MMS Messages
1. Press
and tap
2. Press
and tap Compose.
>
.
Note: From the Messages screen, you can also touch New
message to begin creating a new outgoing message.
4. Review your reply and press Send. (You may select
additional messaging options by pressing
Sprint Service
䊳
Options include: Call, View contact, Add subject,
Attach, Insert Smiley, or More [Delete thread, All
threads, and Add to Contacts]).
.)
3A. Sprint Service: The Basics
131
M580.book Page 132 Monday, April 18, 2011 11:18 AM
3. Tap the To: field and enter the recipient’s phone
number or email information. As you enter the
phone number or email address, matching
contacts appear onscreen.
䡲 Tap an available matching recipient or continue
entering the phone number or email address.
4. Touch the Type to compose field and enter your
䡲
your message. See “Recording Videos” on
page 118.
䡲 Audio: Opens the Select audio menu. Use the
onscreen navigation to select an audio file and
tap OK.
message.
5. Press
Capture video: Opens the camcorder application.
Shoot a video, then tap OK to use this video in
Volume Meter
Recording duration
and tap Attach.
6. Select a multimedia attachment type:
䡲
Pictures: Opens the Gallery application. Use the
onscreen navigation to select the picture you wish
to send with the outgoing message.
䡲 Capture picture: Opens the camera application.
Take a picture, then tap OK to use this image in
your message. See “Taking Pictures” on
page 114.
䡲 Videos: Opens the Gallery application. Use the
onscreen navigation to select a video and attach
it to your outgoing message.
Controls
䡲
Record Play
Record audio: Opens the message recorder
(shown above).
132
3A. Sprint Service: The Basics
Stop
M580.book Page 133 Monday, April 18, 2011 11:18 AM
●
Record Duration: length of the recorded voice
Current Image
message.
Volume Meter: displays the current recording’s
volume level.
● Record: starts recording your message.
● Play: plays back the current recording.
● Stop: stops the recording. Once stopped, tap
either Use this recording (attach it to your
message), or Discard (delete the current
recording and re-record).
䡲 Slideshow: Opens the Edit slideshow menu.
● Touch Add slide to create a new slide (this is a
placeholder for new images to be added,
similar to a playlist).
● Touch the created slide (example, Slide 1), tap
Add picture, and then select the picture you
want to add to the slide.
● Tap the text field below the image to enter a
caption for the picture.
● When finished, tap Done to attach the
slideshow to your message.
Image Navigation
●
Caption Field
Slideshow Controls
Note: To remove or replace a picture or an audio attachment,
7. When you are finished creating your new MMS
message, touch Send MMS.
To view and play a multimedia message:
1. Press
and tap
>
.
3A. Sprint Service: The Basics
Sprint Service
on the Compose screen, tap the Remove button next
to the attachment.
133
M580.book Page 134 Monday, April 18, 2011 11:18 AM
2. From the message list, tap a multimedia message
to open its contents.
3. While the message is open, tap the play icon (on
the video file) to playback the file or tap the image
to view the picture.
Tip: The file attachment on the MMS message can be saved
to the microSD card. To save the attachment, touch and
hold the file and tap Copy attached to SD card from the
Message options context menu.
To reply to a multimedia message:
1. Press
and tap
>
.
2. From the message list, tap a multimedia message
to open its contents.
3. While the message is open, tap the Type to
compose field and then type your reply message.
4. Once complete, tap Send.
Note: When replying to an SMS message with an MMS
message, first open the text message, press
and
tap Add subject or Attach. The original text message is
then automatically converted into a multimedia
message.
134
3A. Sprint Service: The Basics
Deleting a Message
1. Press
and tap
>
.
2. From the message list, highlight a message.
3. Touch and hold the message entry to display the
context menu.
4. Tap Delete message.
Deleting a Message Thread
1. Press
and tap
>
.
2. From the message list, touch and hold the
message thread to display the context menu.
3. Tap Delete thread.
Adjusting Message Settings
1. Press
and tap
>
.
2. From within the Messaging screen, press
and tap Settings.
M580.book Page 135 Monday, April 18, 2011 11:18 AM
䡲
Delete old messages: Enable this option to delete
older text messages that exceed the defined
maximum number of text messages limit set
below.
䡲 Text message limit: Sets the maximum number of
text messages that can be stored on the device.
䡲 Multimedia message limit: Sets the maximum
number of multimedia messages that can be
stored on the device (per conversation).
䡲 Auto-retrieve: Enable this option to automatically
retrieve the entire content of your MMS message.
When checked, the MMS message header,
message body, and any attachments will
automatically download to your device.
● If you disable this option, only the MMS
message header will be retrieved and shown
in the message list.
䡲 Roaming auto-retrieve: Disable this option if you
only desire the MMS message headers to
download while roaming. Enable this option to
automatically download your complete
multimedia messages even while roaming.
䡲
Notifications: Enable this option if you wish to
receive a notification in the status bar when a new
text or multimedia message arrives.
䡲 Select ringtone: Allows you to select a ringer to
sound when a new message is received. Tap this
option, and then select a ring tone that is specific
to new text and multimedia messages. A sample
will briefly be played upon selection.
䡲 Vibrate: Enable this option if you want the device
to vibrate when a new text or multimedia
message is received.
Caller ID
Caller ID allows people to identify a caller before
answering the phone by displaying the number of the
incoming call. If you do not want your number
displayed when you make a call, follow these steps.
1. Press
and tap
onscreen dialer.
>
Phone
to access the
3A. Sprint Service: The Basics
Sprint Service
3. Adjust the following fields according to your needs:
135
M580.book Page 136 Monday, April 18, 2011 11:18 AM
2. Tap
are calling and tap
PQRS
before the number you
.
To permanently block your number, call Sprint
Customer Service.
To respond to an incoming
call while you’re on a call:
䊳
Call Waiting
When you’re on a call, Call Waiting alerts you to
incoming calls by sounding two beeps. Your device’s
screen informs you that another call is coming in and
displays the caller’s phone number (if it is available and
you are in digital mode).
Press
and tap a
call option:
䡲 Answer to answer the
new call. The first
caller is placed on
hold.
䡲 Ignore to send the call
to your voicemail box.
– or –
Touch and drag
to the right to accept or
to the left to
ignore the incoming
call.
To switch back to the first
caller:
䊳
136
3A. Sprint Service: The Basics
New Incoming Call
Press
Current Call
Call Options
and tap Swap calls.
M580.book Page 137 Monday, April 18, 2011 11:18 AM
you can temporarily disable Call Waiting by pressing
PQRS
before placing your call. Call Waiting is
automatically reactivated once you end the call.
Making a 3-Way Call
With 3-Way calling, you can talk to two people at the
same time. When using this feature, the normal airtime
rates will be charged for each of the two calls.
1. Press
and tap
onscreen dialer.
>
Phone
to access the
2. Make your call to the first recipient.
3. Once you have established the connection, press
and tap Add call.
䡲
It may take up to 20 seconds for the button to
become active.
4. Enter the second caller’s phone number and tap
or select a number from your Contacts tab.
(Your first call is automatically put on hold.)
5. When you’re connected to the second party,
press
and tap Merge calls to combine both
calls into a single 3-way call.
If one of the people you called hangs up during your
call, you and the remaining caller stay connected. If you
initiated the call and are the first to hang up, all callers
are disconnected.
Call Forwarding
Call Forwarding lets you forward all your incoming calls
to another phone number – even when your device is
turned off. You can continue to make calls from your
phone when you have activated Call Forwarding.
To activate Call Forwarding:
1. Press
and tap
onscreen dialer.
2. Tap
PQRS
>
Phone
to access the
.
3. Enter the area code and phone number to which
you want your calls forwarded.
3A. Sprint Service: The Basics
Sprint Service
Tip: For those calls where you don’t want to be interrupted,
137
M580.book Page 138 Monday, April 18, 2011 11:18 AM
4. Tap
. (The phone number appears within the
Talk button.) (You will see a message and hear a
tone to confirm the activation of Call Forwarding.)
To deactivate Call Forwarding:
1. Press
and tap
onscreen dialer.
>
Phone
to access the
2. Tap
PQRS
. (You will
see a message and hear a tone to confirm the
deactivation.)
Note: You are charged a higher rate for calls you have
Roaming on Other Digital Networks
When you’re roaming on digital networks, your call
quality and security is similar to the quality you receive
when making calls on the Nationwide Sprint Network.
However, you may not be able to access certain
features, such as data services, depending on the
available network.
Note: If you’re on a call when you leave the Nationwide Sprint
Network, and your call is dropped in an area where you
think Sprint service is available, turn your phone off and
on again to reconnect to the network.
forwarded.
Roaming
Roaming Icon
Your display screen always lets you know when you’re
off the Nationwide Sprint Network. Anytime you are
roaming, the phone displays the roaming icon (
). If
you are roaming on a digital system, you will see the
roaming icon along with the text – Digital Roam – .
Checking for Voicemail Messages While
Roaming
When you are roaming off the Nationwide Sprint
Network, you may not receive on-phone notification of
new voicemail messages. Callers can still leave
messages, but you will need to periodically check your
voicemail for new messages if you are in a roaming
service area for an extended period of time.
1. Dial your ten-digit phone number.
2. When you hear your voicemail greeting, tap
138
3A. Sprint Service: The Basics
.
M580.book Page 139 Monday, April 18, 2011 11:18 AM
3. Enter your password at the prompt and follow the
䡲
voice prompts.
When you return to the Nationwide Sprint Network,
voicemail notification will resume as normal.
Roaming Guard
Your device allows you to control your roaming
capabilities. By using the Roaming menu option, you
can determine which signals your device accepts.
Choose from three different settings on your dual-band
device to control your roaming experience.
>
and tap
networks > Mobile networks.
> Wireless &
2. Tap Roaming Mode to connect to data service
while roaming.
Home Only to access only the home area mobile
network, which is the Nationwide Sprint Network.
This option also prevents roaming on other
networks.
䡲
Depending on service availability and roaming
agreements, your device may be able to access data
services while roaming on certain digital systems.
You can set your device to alert you when you are
roaming off the Nationwide Sprint Network and try to
use data services such as messaging.
Note: Data Roam Guard is turned on by default on your
device.
To set your Data Roam Guard notification:
1. Press
>
and tap
networks > Mobile networks.
> Wireless &
2. Tap Roaming Guard.
3. Tap an onscreen option:
䡲
䡲
Domestic to toggle Voice and Data on and off.
International to toggle Voice and Data on and off.
3A. Sprint Service: The Basics
Sprint Service
Setting Roam Mode
1. Press
Include Roaming to seek service on the
Nationwide Sprint Network. When Sprint service
is unavailable, the device searches for an
alternate system.
139
M580.book Page 140 Monday, April 18, 2011 11:18 AM
Important: Certain data services requests may require
3B. Web and Data Services
⽧
Getting Started With Data Services (page 140)
⽧
Navigating the Web (page 142)
⽧
Wi-Fi (page 149)
⽧
Sprint Mobile Hotspot (page 151)
⽧
Email (page 151)
⽧
Using the Android Market (page 164)
⽧
Sprint Applications (page 166)
⽧
Data Services FAQs (page 170)
Getting Started With Data Services
With your Sprint service, you are ready to start enjoying
the advantages of data services. This section will help
you learn the basics of using your data services,
including managing your user name, launching a data
connection, and navigating the Web with your device.
140
3B. Web and Data Services
additional time to process. While your device is
loading the requested service, the touchscreen or
QWERTY keyboard may appear unresponsive
when in fact they are functioning properly. Allow
the device some time to process your data usage
request.
Your User Name
When you buy your device and sign up for service,
you’re automatically assigned a user name, which is
typically based on your name and a number, followed
by “@sprintpcs.com.” (For example, the third John
Smith to sign up for Sprint data services might have
jsmith003@sprintpcs.com as his user name.)
When you use data services, your user name is
submitted to identify you to the Nationwide Sprint
Network. Your user name is automatically programmed
into your device. You don’t have to enter it.
M580.book Page 141 Monday, April 18, 2011 11:18 AM
Updating Your User Name
1. Press
>
and tap
About phone > System Updates.
>
2. Tap Update Profile.
Launching a Web Connection
䊳
Press
and tap
>
(Browser). (Your
data connection starts and you see the home
page.)
Note: Connected to the Internet can be done via either your
Mobile network or via Wi-Fi (configured via the
Settings > Wireless & networks page).
While connecting, you may see an animation. Once
complete, you are connected to the default Web page
(Google).
Tip: To change the default launch page to a current page,
press
is touching from within either an email or text message.
Data Connection Status and Indicators
Your device displays the current status of your data
connection through indicators at the top of the screen.
The following symbols are used:
Your device is connected to the high-speed
Sprint Mobile Broadband Network (3G). When
the arrows are animated, your device is
transferring data (for example, when you are
opening a Web page).
When the arrows are gray, your device is
connected to the network but is not currently
transferring data.
If you do not see an indicator, your phone does not
have a current data connection. To launch a
connection, see “Launching a Web Connection” on
page 141.
and tap More > Settings > Set home page.
3B. Web and Data Services
141
Web and Data
Note: The Browser automatically launches when a Web link
If you choose to change your user name and select a
new one online, you must then update the user name
on your device.
M580.book Page 142 Monday, April 18, 2011 11:18 AM
Navigating the Web
Selecting
To select onscreen items or links:
Navigating through menus and websites during a data
session is easy once you have learned a few basics.
Note: Prior to gaining access to Sprint’s Powerdeck Web
page, you may be asked to enter your 10-digit PCS
phone number and tap OK. Entering your phone
number is not required for access to other Web pages.
Scrolling
As with other menu and list items on your phone,
scrolling is a simple matter of sliding your finger up or
down through the page.
To scroll line by line through websites:
䊳
Scroll over each available line within a Web page
or to move the onscreen cursor around the page.
To scroll through a website’s page:
䊳
In a single motion, touch and drag across the
page.
䊳
Drag across a page, then touch an onscreen link
to select the link.
Links, which are displayed as underlined text, allow you
to jump to Web pages, select special functions, or even
place phone calls.
To select links:
䊳
Touch an onscreen item or hyperlink.
Going Back
To go back one page:
䊳
Press
on your device. Repeat this process
to keep going back through your Web page history
of recently visited pages.
Note: You can use
for deleting text (like a BACKSPACE
key) when you are entering text.
Going to a Web Page
1. Tap the Address field (top of the browser window)
and enter a new Web address.
142
3B. Web and Data Services
䡲
As you enter the address, possible matches are
displayed within an onscreen list. Tap an entry to
launch the desired website.
2. Tap Go to launch the new page.
Browser Menu
The browser menu offers additional options to expand
your use of the Web on your device.
Opening the Browser Menu
The browser menu may be opened anytime you have
an active data session, from any page you are viewing.
䊳
From any open Web page, press
(You will see the browser menu.)
.
Options available within
the browser menu
include:
䢇 New window: Launches
a new Internet window
while maintaining the
current Web page
active.
䢇 Exit: Allows you to
leave the browser and
return to the previous
screen.
䢇 Bookmarks: Allows you
to access and manage
your bookmarks.
䢇 Windows: Displays the currently active browser
windows as an onscreen list. Tap a window entry to
launch that window.
䢇 Refresh: Reloads the current Web page.
䢇 More: Provide additional browser options:
䡲 Forward (Menu+k): Returns you to a previously
viewed page.
3B. Web and Data Services
Web and Data
M580.book Page 143 Monday, April 18, 2011 11:18 AM
143
M580.book Page 144 Monday, April 18, 2011 11:18 AM
䡲
Add bookmark (Menu+a): Assigns the current Web
page as a new bookmark.
䡲 Find on page (Menu+f): Searches the current Web
page for a word.
䡲 Select text (Menu +e): Selects text from the current
Web page.
䡲 Page info (Menu+g): Displays the Name and URL
(website address) of the site you’re currently
viewing.
䡲 Share page (Menu +s): Allows you to send a URL
via Gmail, SMS, Work Email (Outlook),
or Bluetooth.
䡲 Downloads (Menu+d): Keeps a list of previously
downloaded content.
䡲 Settings (Menu+p): Lets you configure and
manage your browser settings.
Note: These additional options can also be accessed via the
QWERTY keyboard by using a combination of the
Menu button (
) and the specified key
combination.
Selecting Text on a Web Page
1. While on an active
Web page, press
to open the
browser menu.
2. Scroll to the area of the
webpage containing
the desired text.
3. Tap More > Select text.
4. Touch and drag
across the screen and
highlight the desired
text. Any selected text
will appear highlighted
and then be copied to
the device’s clipboard.
Going to a Specific Website
To go to a particular website by entering a URL (website
address):
1. Tap the URL field and enter a website address.
144
3B. Web and Data Services
M580.book Page 145 Monday, April 18, 2011 11:18 AM
As you type the address, if your desired website
appears within the suggested sites list.
2. Tap an entry to begin surfing.
– or –
Complete the entry and tap
.
Note: Not all websites are viewable on your device.
Adjusting Browser Page Settings
1. Press
to open the browser menu.
2. Tap More > Settings.
3. Navigate to the Page content settings area and
select from one of the following page settings:
Text size: Adjusts the current onscreen text size.
Options include: Tiny, Small, Normal, Large, or
Huge.
䡲 Default zoom: Sets the default browser viewing
size. Choose from: Far, Medium, or Close.
䡲 Open pages in overview: Provides an overview of
recently opened pages.
䡲 Text encoding: Adjusts the current text encoding.
䡲
䡲
Block pop-up windows: Prevents popup
advertisement or windows from appearing
onscreen. Remove the checkmark to disable this
function.
䡲 Load images: Allows web page images to be
loaded along with the other text components of a
loaded website.
䡲 Auto-fit pages: Allows web pages to be resized to
fit as much of the screen as possible.
䡲 Landscape-only display: Displays pages only in
the wider landscape screen orientation.
䡲 Enable JavaScript: Enables JavaScript for the
current Web page. Without this feature, some
pages may not display properly. Remove the
checkmark to disable this function.
䡲 Enable plug-ins: Enables browser plugins for the
current Web page. Some pages may require
plugins to properly display or function.
䡲 Open in background: New pages are launched in
a separate page and displayed behind the
current one. Remove the checkmark to disable
this function.
3B. Web and Data Services
Web and Data
䡲
145
M580.book Page 146 Monday, April 18, 2011 11:18 AM
䡲
Set home page: Sets the current home page for
䡲
Enable location: Allows sites to request access to
䡲
Clear location access: Clears location access for
the Web browser.
Adjusting Browser Privacy Settings
1. Press
to open the browser menu.
2. Tap More > Settings.
3. Navigate to the Privacy settings area and select
from one of the following privacy settings:
䡲 Clear cache: Deletes all currently cached data.
Tap OK to complete the process.
䡲 Clear history: Clears the browser navigation
history. Tap OK to complete the process.
䡲 Accept cookies: Allows sites, that require cookies,
to save and read cookies from your device.
䡲 Clear all cookie data: Clears all current browser
cookie files.
䡲 Remember form data: Allows the device to store
data from any previously filled out forms. Remove
the checkmark to disable this function.
䡲 Clear form data: Deletes any stored data from
previously filled out forms. Tap OK to complete the
process.
146
3B. Web and Data Services
your current location (using the built-in GPS).
all websites.
4. Press
to return to the browser.
Adjusting Browser Security Settings
1. Press
to open the browser menu.
2. Tap More > Settings.
3. Navigate to the Security settings area and select
from one of the following privacy settings:
Remember passwords. Stores usernames and
passwords for visited sites. Remove the
checkmark to disable this function.
䡲 Clear passwords. Deletes any previously stored
usernames or passwords. Tap OK to complete the
process.
䡲 Show security warnings. Notifies you if there is a
security issue with the current website. Remove
the checkmark to disable this function.
䡲
4. Press
to return to the browser.
M580.book Page 147 Monday, April 18, 2011 11:18 AM
1. Press
to open the browser menu.
2. Tap More > Settings > Set home page.
3. Delete the current address and enter a new web
page.
4. Tap OK to complete the process.
Resetting the Browser to Default
1. Press
to open the browser menu.
2. Tap More > Settings > Reset to default.
3. Tap OK to complete the process.
Settings the Search Engine
1. Press
to open the browser menu.
2. Tap More > Settings > Set search engine.
3. Tap a search engine. Choose from Google, Yahoo!,
or Bing.
Creating Website Settings
1. Press
2. Tap More > Settings > Website settings. These are
advanced settings that can be configured for
individual sites (ex: Clear location access).
Web and Data
Setting the Browser Home Page
3. Tap OK to complete the process.
Creating Bookmarks
1. From any open Web
page, press
(You will see the
browser menu.)
.
2. Tap Bookmarks. Three
tabs are revealed:
Bookmarks: Displays
a list of your current
Web bookmarks.
䡲 Most visited: Displays
a list of your most
frequently visited
websites. Tap an
entry to launch the
selected page.
䡲
to open the browser menu.
3B. Web and Data Services
147
M580.book Page 148 Monday, April 18, 2011 11:18 AM
䡲
History: Displays a record of your browsing
history. These records are organized into folders
such as: Today, Yesterday, 5 days ago, and
1 month ago.
Creating a New Homepage
1. From any open Web page, press
>
Bookmarks.
3. Tap Add (first entry in the Bookmarks tab).
2. Tap either Most visited or History.
4. Enter a descriptive name for the new bookmark
3. Touch and hold an entry from the list to display an
and tap OK to store the new entry to your
Bookmarks list.
as your new homepage.
Creating Bookmarks from other Tabs
1. From any open Web page, press
onscreen popup menu.
4. Tap Set as homepage to assign the selected entry
>
Bookmarks.
Adding Bookmarks to Your Home Screen
1. From any open Web page, press
.
2. Tap either Most visited or History tab.
2. Tap the Bookmarks tab.
3. Touch and hold an entry from the list to display an
3. Touch and hold an existing entry from the list to
onscreen popup menu.
4. Tap Add bookmark to add the selected entry to
your current list of bookmarks.
– or –
Repeat steps 1 and 2.
5. Tap the star icon adjacent to a website address.
The star now turns gold. This adds the “starred”
website to your current Bookmarks list.
148
3B. Web and Data Services
display an onscreen popup menu.
4. Tap Add shortcut to Home to add the selected entry
to your Home screen.
M580.book Page 149 Monday, April 18, 2011 11:18 AM
(checkmark indicates active). The device scans for
available in-range wireless networks.
About Wi-Fi
To turn Wi-Fi off:
Wi-Fi (short for "wireless fidelity") is a term used for
certain types of wireless local area networks (WLAN).
These device types use an 802.11 wireless
specification to transmit and receive wireless data.
Wi-Fi communication requires access to an existing
and accessible Wireless Access Point (WAP). These
WAPs can either be Open (unsecured) as within most
Hot Spots, or Secured (requiring knowledge of the
Router name and password).
>
2. Tap to remove the green checkmark and
deactivate Wi-Fi.
Note: Use of wireless data connections such as Wi-Fi and
Bluetooth can cause an added drain to your battery
and reduce your use times.
To connect to a Wi-Fi network:
>
and tap
>
Wireless & networks > Wi-Fi settings.
By default, your device’s Wi-Fi feature is turned off.
Turning Wi-Fi on makes your device able to discover
and connect to compatible in-range WAPs.
Turn Wi-Fi on:
>
and tap
Wireless & networks.
>
and tap
Wireless & networks > Wi-Fi.
1. Press
Turning Wi-Fi On and Off
1. Press
1. Press
Web and Data
2. Tap the Wi-Fi field to activate the feature
Wi-Fi
>
䡲
The network names and security settings (Open
network or Secured with WEP) of detected Wi-Fi
networks are displayed in the Wi-Fi networks
section.
Note: When you select an open network, you will be
automatically connected to the network.
3B. Web and Data Services
149
M580.book Page 150 Monday, April 18, 2011 11:18 AM
2. To manually add your new network connection:
Touch Add Wi-Fi network.
䡲 Enter the Network SSID. This is the name of your
Wireless Access Point.
䡲 Tap the Security field and select a security option.
This must match the current security setting on
your target WAP.
䡲 If secured, you will also need to enter your WAP’s
password. The show password option, reveals the
password as you type it vs only showing asterisks
(****).
䡲 Tap Save to store the new information and
connect to your target WAP.
䡲
Note: The next time your device connects to a previously
accessed or secured wireless network, you are not
prompted to enter the WAP key again, unless you reset
your device back to its factory default settings.
To manually scan for a Wi-Fi network:
Note: Wi-Fi must be turned on in order to scan for a network.
1. Press
>
and tap
>
Wireless & networks > Wi-Fi settings.
150
3B. Web and Data Services
2. Press
and tap Scan.
Wi-Fi Status Indicators
The following icons show your Wi-Fi connection status
at a glance:
– Wi-Fi is connected and active.
– Wi-Fi active but there is a communication
issue with the target Wireless Access Point
(WAP).
Using the Wi-Fi Settings Menu
The Wi-Fi settings - Advanced menu allows you to set
up many advanced and IP settings for your device’s
Wi-Fi service, including:
䢇 Setting your Wi-Fi sleep policy
䢇 Entering Proxy and Port Information
䢇 Viewing your device’s MAC Address
䢇 Configuring use of Static IP
To access the Bluetooth Settings menu:
1. Press
>
and tap
>
Wireless & networks > Wi-Fi settings.
2. Press
and tap Advanced.
䡲
Sprint Mobile Hotspot
Sprint Mobile Hotspot allows you to turn your phone
into a Wi-Fi hotspot.
To set up your Sprint Mobile Hotspot:
1. Press
and tap
>
(Sprint
Hotspot).
2. Tap Sprint Hotspot and place a checkmark in the
adjacent field to activate the service.
Note: The best way to keep using the device as a hotspot is
to have it connected to a power supply.
Important: Write down the passkey (password) for this WPA
communication (shown onscreen).
To connect to the Sprint Mobile Hotspot:
1. Enable Wi-Fi (wireless) functionality on your target
device (laptop, media device, etc.).
2. Scan for Wi-Fi networks from the device and select
The default name for your Replenish™ hotspot is
SPH-M580XXX. You can change the name by
tapping Sprint Hotspot Settings > Router name
(SSID) from the Sprint Hotspot screen.
3. Select this device and follow your onscreen
instructions to enter the passkey (provided on the
Sprint Hotspot page).
4. Launch your Web browser to confirm you have an
Internet connection.
Email
Your device’s Email applications let you access and
manage multiple email accounts simultaneously in one
convenient location.
Although there is a separate Gmail™ application,
the main email application can manage both
Internet-based email services (Gmail™ and Yahoo™)
and Corporate Work Email (Outlook®).
The device can also be manually configured to
connect to other email systems.
your Samsung Replenish™ hotspot from the
network list.
3B. Web and Data Services
151
Web and Data
M580.book Page 151 Monday, April 18, 2011 11:18 AM
M580.book Page 152 Monday, April 18, 2011 11:18 AM
Note: If you have multiple email accounts, you must configure
each account with its own settings.
If you want to send and receive email messages
through an Internet Service Provider (ISP) account
(such as Outlook), or if you wish to use your device to
access your corporate email through a Virtual Private
Network (VPN), you will first need to set up an IMAP or
POP account.
䡲 IMAP (Internet Message Access Protocol) - This
mail retrieval protocol is frequently used in large
networks and commercial and institutional
settings. IMAP4 is the current standard.
䡲 POP (Post Office Protocol) - This protocol is
supported by most ISPs and is currently more
common among consumer applications. POP3 is
the current standard.
Note: For more information, review your email carrier’s
literature or contact your IT administrator.
Email Icons/Shortcuts
– IMAP/POP3 Internet Mail shortcut
– Gmail shortcut
152
3B. Web and Data Services
Status Bar - Notifications
– New email message received
Google Mail (Gmail)
This email client is Google’s web-based email service.
A Gmail/Google Mail is created once you sign-up for a
new Google account online. See “Creating a Google
Account” on page 56.
䡲 From a computer, launch your preferred Web
browser and navigate to www.google.com.
Depending on your synchronization settings, Google
Mail (along with calendar events, phone numbers and
other contact information) on your device are
automatically synchronized between your device and
your Gmail/Google Mail account on the Web.
Note: You must have a valid and active Google account prior
to using this email client.
Important: You must log into Google after every power cycle
of your device. Logging into Gmail (via the device)
does not sign you into your Google account.
Gmail logging and access are separate from your
main Google account.
M580.book Page 153 Monday, April 18, 2011 11:18 AM
1. Press
and tap
>
(Gmail).
2. Follow the onscreen prompts.
䡲
The first time you connect, you are asked to give
your Gmail account a unique onscreen name
and enter a From name (displayed in your
outgoing emails within the From field).
3. Tap Done to store the account information and
complete setup.
䡲 Upon initial access, your Gmail Inbox categories
are: Inbox, Personal, Receipts, Travel, Work,
[Gmail]/All Mail, [Gmail]/Drafts, [Gmail]/Sent Mail,
[Gmail]/Spam, [Gmail]/Starred, [Gmail]/Trash and
Trash.
Note: You must have a valid and active Google account
(xxxxxx@gmail.com) prior to Gmail email setup and
configuration.
Your Gmail address is then used to log into your
account via the device.
Opening Gmail
1. Press
and tap
>
Web and Data
Setting Up a Gmail Account via the Device
(Gmail).
2. Tap an email message.
To refresh your Gmail messages:
䊳
Press
and tap Refresh.
Composing Gmail
1. Press
and tap
>
(Gmail).
2. Tap Inbox to open the contents of your Gmail
inbox.
3. Press
and tap Compose.
4. Enter the message recipient’s email address in the
To field.
If you are sending the email to several recipients,
separate the email addresses with a comma.
䡲 You can add as many message recipients as you
want.
䡲
Note: To send a carbon copy (Cc) or a blind carbon copy
Note: Signal interruptions or incorrect username or password
information can cause completion issues.
(Bcc) of the current email to other recipients, press
and tap Add Cc/Bcc.
3B. Web and Data Services
153
M580.book Page 154 Monday, April 18, 2011 11:18 AM
5. Tap the Subject field and enter the email subject.
Accessing Gmail Messages
6. Tap the Compose Mail field and compose your
A new Gmail message (
) icon appears within the
Notifications area of the Status bar to notify you of a
new email.
email.
䡲 To add a picture attachment, tap Attach (from the
bottom of the screen).
䡲 Select the picture you want to attach.
䡲 Tap
to delete a selected attachment from
your current email.
7. Once complete, tap Send (
).
Tap
> Save draft to save the current email
as a draft. To later view your draft email
messages, from the Inbox, tap the Drafts folder.
䡲 To delete the current email message, tap Discard.
䡲
Creating a Gmail Signature
1. From the Gmail inbox, press
More > Settings > Signature field.
2. Enter a signature and tap OK.
154
3B. Web and Data Services
To view a new email:
1. Press
>
.
Touch and hold the Status bar, then slide your
finger down the screen. See “Using the
Notifications Panel” on page 40.
2. Tap the new email from the Notifications list to
launch the Inbox tab.
3. Scroll up and down the email by dragging your
finger up and down.
and tap
and tap
– or –
M580.book Page 155 Monday, April 18, 2011 11:18 AM
Configuring Gmail Settings
.
1. Press
and tap
2. Press
and tap More > Settings.
>
Web and Data
Status bar
3. This menu provides General and Notification
settings:
Email
Screen
Email functions
To reply to an email message:
1. With the email message displayed, tap
.
2. Enter a new message body and tap Send.
To delete an email message:
䊳
Signature: Allows you to create an email signature
for your outgoing Gmail emails.
䡲 Confirm actions: Shows a dialog whenever you
perform selected actions such as: Archive, Delete,
and Send.
䡲 Reply all: Makes ‘Reply all’ the default response
for outgoing messages.
䡲 Auto-advance: Auto-advance: Makes ‘Reply all’
the default response for outgoing messages.
䡲 Message text size: Allows you to choose the text
size displayed within messages: Tiny, Small,
Normal, Large, or Huge.
䡲 Batch operations: Allows label operations.
䡲 Clear search history: Removes all the searches
you have performed.
䡲 Labels: Selects which labels are synchronized.
䡲
With the email message displayed, tap Delete.
3B. Web and Data Services
155
M580.book Page 156 Monday, April 18, 2011 11:18 AM
Email notifications: Activates the email notification
icon to appear within the Notifications area of the
Status bar when a new email message is
received.
䡲 Select ringtone: Plays a selected ringtone once a
new email message is received.
䡲 Vibrate: Activates a vibration once a new email
message is received.
䡲 Notify once: Sets the device to notify you only
once for new incoming emails and not for every
new message.
Tap Manual setup to configure your connection
settings manually (POP3 or IMAP). Follow the
onscreen prompts and enter the information
specific to your carrier.
䡲 The first time you connect, you are asked to give
this Internet mail account a unique onscreen
name and enter a From name (displayed in your
outgoing emails within the From field).
䡲 The unique account name is used to differentiate
this account from other email accounts accessed
by your device.
䡲
Adding Additional Internet Email Accounts
Using
only reveals all currently added Email
accounts. By default, Gmail is already added to this list
of available Internet email providers. To view additional
email accounts within the main Email screen, they must
first be added.
1. Press
and tap
>
.
2. Follow the onscreen instructions to setup an email
account.
䡲
Note: Signal interruptions or incorrect username or password
information can cause completion issues..
Opening Email
1. Press
and tap
2. Press
and tap Accounts.
3. Select an email account.
4. Tap an email message.
To refresh your Email messages:
䊳
156
3B. Web and Data Services
>
Press
and tap Refresh.
.
M580.book Page 157 Monday, April 18, 2011 11:18 AM
Composing Email
Note: To send a carbon copy (Cc) or a blind carbon copy
and tap
2. Press
and tap Accounts.
>
3. Select an email account.
4. Tap Inbox to open your inbox.
5. Press
and tap Compose.
6. Enter the message recipient’s email address in the
To field.
If you are sending the email to several recipients,
separate the email addresses with a comma.
䡲 You can add as many message recipients as you
want.
䡲 Choose recipients from the following sources:
● Recent to access your list of recent contacts.
● Contacts to access your current Contacts
page.
● Search to search for a contact from within your
device.
䡲
(Bcc) of the current email to other recipients, tap the
Cc/Bcc fields.
.
Web and Data
1. Press
7. Tap the Subject field and enter the email subject.
8. Tap the Compose Mail field and compose your
email.
To add a file attachment, tap Attach (from the
bottom of the screen), select a file, and tap OK.
䡲 Select the picture you want to attach.
䡲 Tap
to delete a selected attachment from
your current email.
䡲
9. Once complete, tap Send.
Tap
> Save as draft to save the current
email as a draft. To later view your draft email
messages, from the Inbox, tap the Drafts folder.
䡲 To delete the current email message, tap Discard.
䡲
Adding Additional Internet Email Accounts
1. Press
and tap
2. Press
and tap Accounts >
>
.
> Add
account.
3B. Web and Data Services
157
M580.book Page 158 Monday, April 18, 2011 11:18 AM
3. Follow the onscreen prompts to add additional
Internet-based email accounts such as Yahoo!,
Gmail, AOL, or other POP or IMAP accounts.
Configuring Email Settings
1. Press
and tap
>
.
2. Tap the email account from the Accounts area of
the Email screen.
3. Tap Inbox to open the contents of your inbox.
4. Press
and tap More > Account settings. (See
“Synchronizing Your Corporate Account” on
page 65.)
5. This menu provides both field information and
settings:
䡲
General settings allows you to configure:
●
●
●
158
Account name displays the name used by the
device to track the account.
Your name displays the name used in the
From field within your outgoing emails.
Email check frequency configures the
frequency which the device queries the
remote server for new email changes.
3B. Web and Data Services
Default account assigns this account as the
default used when sending out new emails.
䡲 Notification settings allows you to configure:
● Email notifications enables the device to
display a status bar icon
when new
emails have been received.
● Select ringtone assigns an audible ringtone
when a new or upcoming event is pending.
● Vibrate assigns a vibration when a new or
upcoming event is pending.
䡲 Server settings allows you to configure:
● Incoming settings provides access to the
Domain, password, and exchange server
parameter fields.
● Outgoing settings Adjusts the outgoing
parameters, such as username, password and
other outgoing connection parameters such
as SMTP server.
䡲 Common settings allows you to configure:
● Forward with files allows you to include
attachments when forwarding an email.
●
M580.book Page 159 Monday, April 18, 2011 11:18 AM
Add signature: Activates the email signature
feature.
●
Signature allows you to create an outgoing
email signature attached to new emails sent
from your device.
3. Enter your Email address and Password
information, then tap Next. Consult your Network
Administrator for further details.
䡲
Email address: your Outlook work email address.
䡲
Password: typically your network access
password (Case-sensitive).
Corporate Email (Outlook)
The main Email application (
) provides also
provides access to your Outlook Exchange server via
your device. If your company uses Microsoft Exchange
Server 2003 and 2007 as the corporate email system,
you can use this email application to wirelessly
synchronize your email, Contacts, and Task information
directly with your company’s Exchange server.
4. Tap Exchange account (from the add new email
account screen).
5. When prompted to provide additional detailed
information, scroll down the screen and tap Next.
6. Enter a Domain\Username, Password, and
Exchange Server information.
䡲
Domain\Username: enter your network
䡲
Password: typically your network access
䡲
Exchange Server: your exchange server remote
email address. Typically starts with mail.XXX.com.
Important: This Outlook application does not utilize
domain\desktop login username.
®
Microsoft ActiveSync to synchronize the device
to your remote Exchange Server. This
synchronization is done wirelessly over the air
(OTA) and not via either a direct connection.
Setting Up a Corporate Email
1. Press
and tap
>
(Email). See
“Creating Shortcuts” on page 34.
2. Press
Web and Data
●
password (Case-sensitive).
Obtain this information from your company
network administrator.
and tap Accounts > Add account.
3B. Web and Data Services
159
M580.book Page 160 Monday, April 18, 2011 11:18 AM
䡲
䡲
If your network requires SSL encryption, tap the
Use secure connection (SSL) field to place a
checkmark in the box and activate this additional
level of security.
If your exchange server requires this feature, leaving
this field unchecked, can prevent connection.
Note: Signal interruptions or incorrect username or password
information can cause completion issues.
7. Read the onscreen activation disclaimer and, if
prompted, tap Next.
8. Configure your Email check frequency, Amount to
synchronize (days to synchronize between your
device and server), and activate any other email
settings, then tap Next.
9. Identify your new account with a unique name and
provide the outgoing name text then tap Done.
Important: You can synchronize over the air (not directly) with
an Exchange Server running Microsoft Exchange
Server 2003 Service Pack 2 (SP2) or Microsoft
Exchange Server 2007.
Note: You can have multiple Work Email (Microsoft Exchange
ActiveSync) accounts active on your device.
160
3B. Web and Data Services
Opening Corporate Email
1. Press
and tap
>
.
2. Tap a message to read, manage, and reply to your
email messages.
From your Inbox screen, press
to select
options, such as Refresh, Compose, Accounts,
Account settings, Sort, or Search.
䡲 While in a message, press
to select
messaging options, such as Delete, Forward,
Reply, Reply all, Mark as unread, or Save to
Calendar.
䡲
Create and Send Email
1. From the Inbox, press
and tap Compose.
2. Enter the message recipient’s email address in the
To field.
䡲
Choose recipients from the following sources:
● Recent to access your list of recent contacts.
● Contacts to access your current Contacts
page
● Group to access any available Groups (within
which are associated Contacts entries).
M580.book Page 161 Monday, April 18, 2011 11:18 AM
With the email message displayed, press
and tap either Reply or Reply all.
䡲 If you select Forward, you must specify the
message’s recipients.
Note: To send an additional carbon copy (Cc) or a blind
carbon copy (Bcc) of the current email to other
recipients, press
and tap Add Cc/Bcc.
3. Tap the Subject field and enter the email subject.
4. Tap the Body field and compose your email.
To add a picture attachment, tap Attach (from the
bottom of the screen).
䡲 You can access the internal microSD card and
navigate to the file you wish to attach.
䡲 Tap the file you wish to attach and tap OK.
䡲
Web and Data
Search to search for a contact from within your
device.
䡲 If you are sending the email to several recipients,
separate the email addresses with a comma.
䡲 You can add as many message recipients as you
want.
●
3. Enter a new message body and tap Send.
To delete an email message:
䊳
Touch and hold an email (from your inbox list) and
select Delete from the onscreen context menu.
– or –
With the email message displayed, tap Delete.
Configuring Corporate Email Settings
After your initial setup, you are taken to the Settings
menu for your new Work Email account.
Account Settings: configures send and receive settings,
such as email signature, notifications, synching, etc.
To reply to an email message:
1. From the Inbox, tap an email message.
2. With the email message displayed, tap either Reply
or Reply all.
– or –
3B. Web and Data Services
161
M580.book Page 162 Monday, April 18, 2011 11:18 AM
1. Press
and tap
2. Tap
within the Corporate account field to
reveal the account’s synchronization settings
screen.
>
>
Accounts & sync.
3. Tap the parameters you wish to synchronize.
2. Tap
within the
Corporate account field
to reveal the account’s
synchronization settings
screen.
䡲
Account settings allows you to configure:
●
●
3. Toggle either the Sync
●
Contacts or Sync
Calendar fields to force
the device to manually
resync either the
exchange Contacts or
Calendar entries.
Setting Options
●
– or –
Tap Account settings and configure any other email
parameters you wish to synchronize. See
“Synchronizing Accounts” on page 64.
To configure Corporate Email settings:
1. Press
>
Accounts & sync.
162
and tap
3B. Web and Data Services
>
Account name displays the name used by the
device to track the account.
Your name displays the name used in the
From field within your outgoing emails.
Email check frequency configures the
frequency which the device queries the
remote server for new email changes. Choose
from: Automatic (Push), Never, Every 5 minutes,
Every 10 minutes, Every 15 minutes, Every 30
minutes, or Every hour.
Amount to synchronize to assign the sync
range for your incoming and outgoing emails
between your device and your external
exchange server. How many days worth of
emails should the device and server
synchronize. Choose from: One day, Three
days, One week, Two weeks, or One month.
M580.book Page 163 Monday, April 18, 2011 11:18 AM
●
●
●
●
●
●
●
Default account assigns this account as the
default used when sending out new emails.
Email notifications enables the device to
display a status bar icon
when new
emails have been received.
Select ringtone assigns an audible ringtone
when a new or upcoming event is pending.
Vibrate assigns a vibration when a new or
upcoming event is pending.
Incoming settings provides access to the
Domain, password, and exchange server
parameter fields.
Sync contacts synchronizes the contacts
between your device and the remote
exchange server. A checkmark indicates the
feature is enabled.
Sync calendar synchronizes your exchange
calendar entries between your device and the
remote exchange server. A checkmark
indicates the feature is enabled.
Forward with files causes any outgoing email
replay to include any currently attached files. A
checkmark indicates the feature is enabled.
●
Signature allows you to create an outgoing
email signature attached to new emails sent
from your device.
4. Press
Web and Data
●
to return to the previous screen.
For more detailed Corporate email information, see
“Corporate Email (Outlook)” on page 159. For more
information on Corporate Calendar synchronizing,
Synchronizing Corporate Calendar Events (page 93).
To create a Corporate Email Signature:
This signature can differ from any current Email
signature on your local Outlook client. This signature is
applied to any outgoing emails originating on your
device.
1. Press
>
Accounts & sync.
and tap
>
2. Tap
within the Corporate account field to
reveal the account’s synchronization settings
screen.
3. Scroll to the bottom of the list and tap Signature.
4. Delete the current default text and enter your new
email signature.
3B. Web and Data Services
163
M580.book Page 164 Monday, April 18, 2011 11:18 AM
5. Tap OK to store the new signature.
Using the Android Market
Configuring Data Synchronization Settings
This feature allows you to determine which current
applications are synchronized with external server and
at what intervals.
1. Press
>
and tap
>
Accounts & sync. These settings can affect data
minute usage, please refer to your current data
plan for more details.
2. Tap any of the following options:
䡲
Background data: Allows data synchronization to
occur as a background function. It allows this to
occur behind the scenes and does not affect any
current use of the device.
䡲 Auto-sync: Requires the device to maintain
synchronized with the remote server providing
data to your selected applications.
3. Press
to store your changes and return to
the Home screen.
The Android Market provides direct access to a large
selection of applications which you can download and
install on your device.
Accessing the Market
1. Press
3B. Web and Data Services
>
(Market).
tap Next.
3. Tap Sign in and enter your Google account
information.
4. Touch Accept to agree to the Android Market terms
of service.
Selecting and Installing a Google Application
1. Press
and tap
>
.
2. Tap the desired onscreen application.
3. Read the application descriptions.
4. Tap Install.
164
and tap
2. If not already logged in with your Google account,
M580.book Page 165 Monday, April 18, 2011 11:18 AM
any personal data, functions, or significant amounts of
data usage times.
5. If prompted, follow the onscreen instructions to pay
for the application.
6. Check the progress of the current download by
opening the Notifications panel.
7. After the item is downloaded and installed on your
device, the content download icon appears in the
notification area of the status bar.
8. On the Android Market screen, tap
Launching an Installed Google Application
and tap
If the Android operating system is ever updated, any
data contained on the device will be erased. The only
data stored on the device are Google applications
available via the Android Market.
Note: Pictures and music are stored on the microSD card.
Contacts and Calendars are stored remotely on with
your remote Google or Outlook servers.
1. Log into your Google account via the device.
2. Press
and tap
>
>
>
Downloads.
>
Downloads, tap the installed application in the list,
and then tap Open.
1. Press
Reinstalling a Google Application
Web and Data
Note: Use caution with applications which request access to
3. Scroll through the list of previously downloaded
Google applications and choose the one you wish
to reinstall.
4. Follow the onscreen instructions.
.
2. Tap the newly installed application.
3. Read the application descriptions.
– or –
Press
and tap
>
>
>
Downloads.
3B. Web and Data Services
165
M580.book Page 166 Monday, April 18, 2011 11:18 AM
Sprint Applications
Note: Once you download and install the Sprint pack, Sprint
applications such as NASCAR Sprint Cup Mobile,
Sprint Football Live, and TeleNavTM GPS Navigator
will appear on your applications screen. When you
switch from the Sprint pack to another ID pack, or
choose a new ID pack, the Sprint applications will
remain installed and visible on your applications
screen.
You can access a wide variety of Sprint applications in
many different categories with your phone and data
service. Currently, various applications, such as
NASCAR, Sprint Football Live, TeleNav GPS Navigator,
and Sprint TV are available when you download and
install the Sprint ID pack.
Download the Sprint ID Pack
䊳
Press
and tap
. On the Choose your ID
screen tap Get New > Sprint. Follow the onscreen
prompts to install the Sprint ID Pack.
– or –
and tap
> Sprint ID > Get a New
Press
ID. Follow the onscreen prompts to install the
Sprint ID Pack.
166
3B. Web and Data Services
To download and install Sprint apps:
䊳
Press
and tap
> [application name].
The browser will start and take you to the
download menu for the application.
5. Follow the instruction to customize your application
(such as selecting a favorite team or driver) or
press
to explore your options.
Important Privacy Message – Sprint’s policies often do not
apply to third-party applications. Third-party applications may
access your personal information or require Sprint to disclose
your customer information to the third-party application
provider. To find out how a third-party application will collect,
access, use, or disclose your personal information, check the
application provider’s policies, which can usually be found on
their website. If you aren’t comfortable with the third-party
application’s policies, don’t use the application.
M580.book Page 167 Monday, April 18, 2011 11:18 AM
Fi connection present. If prompted, disable your
device's Wi-Fi feature while using these applications.
Sprint Zone
and tap
>
(SprintZone).
2. From the Sprint Zone Web page, scroll up or down
and tap an item to check your account, read the
latest news about your device, load an application,
and more.
NASCAR Sprint Cup Mobile
Now you have the ability to get every bit of NASCAR
coverage, news, and stats right on your device.
1. Press
Cup Mobile).
make a selection and tap OK. Follow the onscreen
instructions until you reach the main NASCAR
Sprint Cup Mobile page.
3. Navigate the main page by either scrolling around
Sprint Zone is a free application that lets you stay
connected to all the latest news and information from
Sprint. Included here are sprint customer promotions,
news, feedback, featured apps and tips/tricks for your
device.
1. Press
2. If prompted, read the permission check disclaimer,
and tap
>
(NASCAR Sprint
using your directional keys or using the Optical
Joystick.
Web and Data
Note: Some Sprint data applications may not work with a Wi-
4. Tap an onscreen option to activate features that
include:
Home is the main NASCAR homepage where you
can view stats on a current race, choose to follow
a specific driver, view special NASCAR
promotions and other NASCAR-specific
multimedia content.
● Press
and tap Home to return to the
main NASCAR page. This applies to each of
these options.
䡲 Leaderboard launches a an onscreen board
showing the ranking of leaders in the competition.
䡲 Race Recap provides overviews of the current
races, pictures, commentary, additional photos,
and race stats.
䡲
3B. Web and Data Services
167
M580.book Page 168 Monday, April 18, 2011 11:18 AM
䡲
Speed displays a list of selectable multimedia
video clips from the SPEED channel that are
specific to NASCAR.
䡲 Chase displays race stats, driver info, news,
photos, etc. for the All-Star race.
䡲 My Driver to customize your NASCAR experience
by following specific drivers. Information includes
driver-specific stats and NASCAR RSS feeds. You
can also get additional stats, review other driver
info, or change drivers.
䡲 Stats/Sched lets you track race information such
as: NSCS Recap, NNS Recap, Point Standings,
Season Stats, and Schedule.
䡲 Miss Sprint Cup is your insider to NASCAR by
providing news, information, blogs and twitter
updates to the goings-on within NASCAR photos,
etc. for the All-Star race.
䡲 Video displays a list of selectable multimedia
content. Other features include streaming
multimedia content from NASCAR radio stations
or other racing radio shows.
168
3B. Web and Data Services
News & Alerts provides you with quick access to
NASCAR-specific news, photos, and driver stats.
You can also customize alerts for new information
such as ALL NASCAR News, Sprint Cup News,
etc.
䡲 Community lets you take part in online fantasy
racing, access Photos, Activity Wall, Blogs, and
Videos.
䡲 Fantasy lets you take part in online fantasy racing,
access Fantasy Insight, Fantasy News, and Fantasy
Videos. You will have to login using a
NASCAR.COM Community login. If you do not
have this information, visit community.nascar.com to
get an account.
䡲 FanZone displays a list of selectable content
available to Sprint subscribers such as
Sweepstakes, Video clips (footage and music)
and Screensavers.
䡲 Settings and Help displays help information for
usage of the NASCAR application and features.
䡲 Exit to quit the NASCAR application.
● Press
and tap Exit.
䡲
M580.book Page 169 Monday, April 18, 2011 11:18 AM
Sprint Football Live
and tap
>
(Sprint Football
Live).
2. Tap Continue and follow the onscreen instructions
to customize your football experience by choosing
your favorite team.
3. Access any of the following features by pressing
Leaders, Team League Leaders, Player Stats and
Team Stats.
(menu):
My Team launches a team-specific page with
content such as top stories, RSS feeds, Rumor
information, Schedules, Team Alerts, and the
ability to change your favorite team selection.
䡲 Scores and Schedules provides final scores and
future game schedules. The content can be
viewed By Week or By Team.
䡲
Web and Data
Get Sprint Football Live on your phone. It lets you be
right in the middle of your favorite game by being a
part of previews, blogs, discussions groups, fantasy
football, etc.
1. Press
News and Analysis provides AP league news,
Rumor and News, PFTV, Injury Info, Transactions,
Legal, and other football related information,
photos and videos.
䡲 Team Pages allows you select from wither the AFC
or NFC conferences, and then display content
such as top stories, RSS feeds, Rumor
information, Schedules, Team Alerts, and the
ability to change your favorite team selection.
䡲 Standings provides regular season team
standings by conference (NFC or AFC).
䡲 Statistics provides regular season rundowns. You
can view them by Weekly Leaders, League
䡲
䡲
Twitter launches an onscreen Twitter page
specific to the NFL. Also included onscreen is a
real-time RSS new feed.
䡲 Odds launches a spreadsheet of game outcome
predictions.
䡲 Fantasy allows you to choose from a list of
applications associated with fantasy football
leagues.
3B. Web and Data Services
169
M580.book Page 170 Monday, April 18, 2011 11:18 AM
䡲
Videos and Photos provides images, highlights,
previews, and commentaries about your favorite
football news.
䡲 Settings/Help displays help information for Sprint
Football Live topics such as: Choose Favorite
Team, About, and Help.
䡲 Exit allows you to exit the Sprint Football Live
application. Tap YES to exit.
Data Services FAQs
How do I sign in for the first time?
You are automatically signed in to access data services
when you turn on your device.
How do I know when my device is connected to data
services?
Your device automatically connects when you use data
service or an incoming message arrives. You will also
see the
or
indicator.
Can I make calls and use data services at the same time?
No, you can not use voice and data services
simultaneously.
170
3B. Web and Data Services
When is my data connection active?
Your connection is active when data is being
transferred. Outgoing calls are allowed; incoming
calls go directly to voicemail. When active, the
or
indicator is animated on the display
screen.
When is my data connection dormant?
If your device receives no data for 10 seconds, the
connection goes dormant. When the connection is
dormant, you can make and receive voice calls. (The
connection may become active again quickly.) If your
device receives no data for an extended period, the
connection will terminate.
Can I re-download paid applications without being
charged again?
Your Market applications are associated to your
Google account login information. Even if your device
is reset and reinstalled with an update to Android, you
can log back into your Google account and reinstall
these applications.
M580.book Page 171 Monday, April 18, 2011 11:18 AM
⽧
Getting Started with Sprint TV and Music (page 171)
⽧
Sprint TV (page 172)
⽧
Music (page 172)
⽧
YouTube (page 175)
Sprint TV gives you the ability to listen to audio clips
and to view video clips right from your device’s display.
Watch live TV and catch up on episodes of your
favorite shows – anywhere on the Nationwide Sprint
Network.*
* Sprint TV coverage not available everywhere. Content and
lineup subject to change. Select channels also available
for casual usage. Visit www.sprint.com/tvguide for more
information.
Getting Started with Sprint TV and
Music
In order to access Sprint applications on your device,
such as Sprint TV, you must first download and install
the Sprint ID Pack. Once you have installed the Sprint
pack, you can switch back to any other pack or install a
new pack. The Sprint applications will always be stored
on your applications screen.
䊳
Press
and tap
. On the Choose your ID
screen tap Get New > Sprint. Follow the onscreen
prompts to install the Sprint ID Pack.
– or –
and tap
>
Sprint ID > Get
New ID. Follow the onscreen prompts to install the
Sprint ID Pack.
Press
3C. Entertainment: TV and Music
171
TV and Music
3C. Entertainment:
TV and Music
M580.book Page 172 Monday, April 18, 2011 11:18 AM
Sprint TV
3. Tap an entry to select a channel from the Sprint TV
Your Sprint TV Channel Options
Note: The first time you access a channel, the system will
The Sprint TV application offers a wide variety of
accessible channels. Subscription options include
comprehensive basic packages as well as a full menu
of “a la carte” channels. Visit www.sprint.com/tvguide for
more information on channels and pricing.
Note: Available categories and content are subject to change.
Watching TV
listings or to select an available category.
prompt you to purchase access (unless the channel
doesn't have a monthly fee). Tap Subscribe to
purchase access, or tap Preview to view a preview of
the selected channel.
4. Tap a desired clip to view the program. The clip will
automatically load and begin playing.
Tip: Scroll through the channels to view more selections.
Once you find a channel that you want to watch or listen
to, simply tap it and wait approximately three seconds,
and the channel begins loading.
1. Press
and tap
>
(SprintTV).
Depending on your settings, your device may
prompt you to accept a data connection.
Note: SprintTV can only be viewed over a cellular connection.
Turn off your Wi-Fi communication prior to using this
application. If prompted, tap Disable Wi-Fi to continue.
2. Select TV, Radio, Favs, or More to display channel
options.
Music
The Market store lets you purchase and download digital
music players, radio station applications, and ringtones
to play on your device or computer.
Purchasing and Downloading Music from
Amazon
1. Press
172
3C. Entertainment: TV and Music
and tap
>
(Market).
M580.book Page 173 Monday, April 18, 2011 11:18 AM
2. Select Apps > [music application].
or album, tap Install.
Pressing Install allows you to purchase the song
and download it to your device’s microSD card.
● When you select Install, you will need to log
into your Amazon account. (If there is no
microSD card installed or if there is not
enough free memory space on the card, you
will see an alert.)
● Once the application has been downloaded to
your microSD card, you can use the Music
application to playback the file.
䡲
Accessing the Music Player
and tap
>
browse through your available titles.
To play a song, tap it to display the title and track
information.
䡲 To listen to a song or playlist, tap it to begin
playing from the selected song. (You can also
highlight the playlist to begin listening.)
䡲
Creating a Playlist
1. Press
(Music).
2. From the Music display, select an option:
Artists to display your current local music files
sorted by artist.
䡲 Albums to display your current local music files
sorted by album.
䡲
3. Once you’ve displayed a list of songs, you can
TV and Music
3. Once you have located a desiredmusic application
1. Press
Songs to browse through all of your downloaded
music and any additional songs you have loaded
onto your microSD card from your computer.
䡲 Playlist to select a customized playlist you’ve
created to organize your music.
䡲
and tap
>
> Songs. Your
device searches through your device and microSD
card for compatible music files and then displays
them onscreen.
2. Touch and hold a song you’d like to add to a
playlist. This action reveals an onscreen popup
menu.
3. Tap Add to playlist and select either a Current
playlist or select New (to create a new playlist).
3C. Entertainment: TV and Music
173
M580.book Page 174 Monday, April 18, 2011 11:18 AM
䡲
If you select New, delete the current default name,
enter a name for your new playlist, and tap Save.
Assigning a Song as a Ringtone
1. Press
and tap
>
> Songs.
2. Touch and hold a song you’d like to use as your
new ringtone. This action reveals an onscreen
popup menu.
3. Tap Use as phone ringtone to store the selected
song as your new default ringtone.
4. Confirm the song has been successfully assigned
by navigating to your Phone ringtone menu.
䡲 Press
>
and tap
> Sound >
Phone ringtone.
5. Confirm the new song is selected.
174
3C. Entertainment: TV and Music
Backing Up Your Downloaded Music Files
Sprint recommends you back up your downloaded
music files to your computer. Although the downloaded
files can only be played on your phone and on your
account, backing them up to your computer lets you
access the files in case your microSD card is lost or
damaged, or if you install a new microSD card.
See “Connecting Your Device to Your Computer” on
page 111.
1. Connect your phone using a USB cable or the
built-in connection on Bluetooth-enabled phones.
2. Use your computer to navigate to the microSD
card’s Music folder.
3. Select and copy the music files to a folder on your
computer’s hard drive.
M580.book Page 175 Monday, April 18, 2011 11:18 AM
YouTube
Note: It is not necessary to sign in to the YouTube site to view
content. However, if you wish to sign in to access
additional options, access the page via the Web
browser and tap Sign in at the top right corner, enter
your YouTube or Google username and password, and
tap Sign in.
TV and Music
YouTube™ is a video sharing website on which users
can upload and share videos. The site is used to
display a wide variety of user-generated video content,
including movie clips, TV clips, and music videos, as
well as video content such as video blogging,
informational shorts and other original videos.
Note: YouTube is a data-intensive feature. Sprint recommends
that you upgrade to an unlimited data plan to avoid
additional data charges.
1. Press
and tap
>
(YouTube) .
2. Read the disclaimer regarding data usage and
touch Accept.
3. Press
to open the onscreen keyboard and
tap the Search key to search for specific videos,
scroll down to browse through the main page
thumbnails, or scroll to the bottom to explore
additional options.
4. To view a video, touch an available preview
thumbnail or touch the title link.
5. Press
to return to the previous page.
3C. Entertainment: TV and Music
175
M580.book Page 176 Monday, April 18, 2011 11:18 AM
Note: Enabling the GPS hardware can drain your battery
faster.
3D. GPS Navigation
Activating Using Wireless Networks
This additional location feature uses open Wi-Fi and
mobile network connections to assist in providing
additional location accuracy.
⽧
GPS Services (page 176)
⽧
Google Maps (page 176)
⽧
Navigation (page 178)
⽧
TeleNav GPS Navigator (page 178)
>
and tap
security > Use wireless networks.
⽧
Getting Driving Directions (page 180)
䡲
1. Press
GPS Services
> Location &
Since this feature is based on Google’s location
service, you will need to agree to allow Google to
collect anonymous information.
2. Tap Agree to accept the terms of service.
Your device’s built-in GPS capability gives you access
to a number of location-based services, including
Maps and Sprint Navigation.
Activating Location Mode
Before using any of the location-based services, you
must turn on your device’s location mode.
䊳
176
Press
>
and tap
security > Use GPS satellites.
3D. GPS Navigation
> Location &
Google Maps
Use this application to find directions, location
information, business addresses, etc., all right from your
Samsung Replenish™. Determine your current location
with or without GPS, get driving and transit directions,
get phone numbers and addresses for local
businesses.
M580.book Page 177 Monday, April 18, 2011 11:18 AM
To utilize Google Maps:
1. Press
To enable your device’s GPS Location feature:
1. Press
>
and tap
> Location &
䡲
security.
2. Tap Use GPS satellites. A checkmark indicates the
GPS location feature is enabled. For additional
location information, see “Location Settings” on
page 63.
䡲
appears in the Notification area when the
GPS is active.
GPS is communicating.
Press
and tap
If prompted, read
the What’s new
message and tap
OK.
2. Tap the magnification
icons to zoom in or
out of the current
map view.
to utilize other Google Map features.
Press
Choose from: Search, Directions, Layers,
My Location, Join Latitude, and More.
䡲
To launch the Google Maps application:
䊳
.
– or –
appears in the Notification area when the
䡲
and tap
>
>
.
GPS Navigation
Before you begin using this feature you must activate
your GPS hardware and agree to share location
information with Google.
To search for a keyword:
1. Press
and tap
2. Press
and tap Search.
>
.
3D. GPS Navigation
177
M580.book Page 178 Monday, April 18, 2011 11:18 AM
3. Tap the search field (at the top of the screen), enter
a keyword, and tap
.
䡲 This keyword can be a category name (such as
pizza, steak, burger), a business name (Samsung,
Sprint), or a Google friend who is sharing their
location.
4. Tap
(bottom left) to reveal a detailed list of
information corresponding to those matches now
displayed on your screen with lettered pins.
TeleNav GPS Navigator
Navigation
Another Google Maps navigation application is
available on your device. It uses your current location
(provided by GPS communication to your device) to
provide various location-based services.
1. Press
and tap
>
.
2. Read the onscreen disclaimer and tap Accept.
3. Choose from the following onscreen options:
䡲
Speak Destination use the voice recognition
feature to search for matching locations in your
area.
178
Type Destination to manually enter a destination
address (via either QWERTY or onscreen
keyboard).
䡲 Contacts to receive turn-by-turn directions to the
address stored for a selected Contacts entry.
䡲 Starred places to obtain directions to locations that
have been starred within Google maps
(maps.google.com).
䡲
3D. GPS Navigation
TeleNav GPS Navigator gives you turn-by-turn
directions onscreen and over speakerphone. In order
to use this application, you must first turn on the Enable
GPS Satellites setting.
Note: Depending on your service plan, TeleNav may require
a monthly subscription. Contact Sprint for information
and pricing.
Note: Some features may be available only with a
subscription to TeleNav GPS Navigator Premium.
M580.book Page 179 Monday, April 18, 2011 11:18 AM
Getting Started with TeleNav GPS
Navigator
4. If prompted to allow installation of blocked content,
Before you can use TeleNav GPS Navigator, you must
first install the Sprint ID pack.
5. Tap Install.
Press
and tap
. On the Choose your ID
screen tap Get New > Sprint. Follow the onscreen
prompts to install the Sprint ID Pack.
– or –
Before you can use the TeleNav GPS Navigator, your
device and service must be registered.
1. Press
and tap
>
> Get a New ID.
Press
Follow the onscreen prompts to install the Sprint ID
Pack.
To install the TeleNav GPS Navigator application:
1. Press
Registering TeleNav GPS Navigator
and tap
>
(TeleNav GPS
Navigator).
Note: Some application might also be located within Sprint
Zone > Suggested Apps > More...
and tap
>
> (TeleNav GPS
Navigator).
2. Read the disclaimer and touch Accept to
acknowledge the terms of use.
3. Tap each of the onscreen registration fields and
enter the required information.
First Name, Last Name, and Email (optional).
䡲 If using the onscreen keyboard, tap Next to store
your information.
䡲
2. Tap Install.
4. Tap Continue to register your information.
3. Tap the NAV.pak file from the download history
5. Tap Yes to take a brief tour of the Navigation
screen.
GPS Navigation
䊳
tap Settings and select Unknown sources. (See
“Unblocking Unknown Installations” on page 74.)
features and functionality, or No, Skip Tour to
continue to the main navigation screen.
3D. GPS Navigation
179
M580.book Page 180 Monday, April 18, 2011 11:18 AM
Using TeleNav GPS Navigator
1. Press
and tap
>
●
> (TeleNav GPS
Food/ Coffee, Gas Stations, Gas by Price,
Banks/ATMs, WiFi Spots, Parking Lots, Hotels &
Motels, Movie Theaters, etc.
Navigator).
2. Select an option and follow the onscreen
instructions to take advantage of TeleNav’s full
suite of features.
䡲 Drive To lets you get driving directions from
wherever you are to wherever you’re going.
Choices include:
● My Favorites: user-defined favorite locations.
● Recent Places: recently entered locations.
● Address: manually entered street addresses.
● Intersection: map based on manually a
entered street intersection.
● City: display a city map based on selected city.
● Business: locations based on business
categories.
● Airports: local airports based on current GPS
location.
● Contact: those local addresses assigned to
previously entered Contacts.
180
3D. GPS Navigation
Search lets you search for locations from
dozens of names or category options such as
●
●
Maps & Traffic provides access to a 2D map of
your current location, access to real-time traffic
information, and other additional features.
Share & More offers additional options, such
as sharing your location with contacts,
creating and storing My Favorites locations,
accessing the product tour, looking for movies
and movie theaters, and setting detailed
application preferences.
Note: For more information about Sprint Navigation powered
by TeleNav, visit www.sprint.com/navigation.
Getting Driving Directions
The built-in GPS hardware (when enabled) allows you
to get driving directions to selected locations or
establishments based on your current location.
M580.book Page 181 Monday, April 18, 2011 11:18 AM
Using a Physical Address
1. Press
and tap
>
> Drive To >
Address.
2. Tap Address field to manually enter the new
address and receive driving directions from the
GPS network.
Your location
3. Tap Say It In to place a call to the TeleNav™
operator where you will speak the desired address.
This is similar to calling 411 for directory
assistance. (A fee may be incurred.)
then enter respective information (Address, City,
State/ZIP, and Country).
GPS Navigation
4. Tap Address then tap any of the address fields to
Directions
List
5. Tap Done to initiate your search.
6. Follow both the onscreen and audio directions.
After you enter the location and receive driving
directions, you can alter the information being
displayed by using one of three other driving options:
Traffic, Summary, and Search.
Current Street
location
Magnifications
To receive turn by turn directions (2D):
1. Press
and tap
>
> Drive To >
Address.
3D. GPS Navigation
181
M580.book Page 182 Monday, April 18, 2011 11:18 AM
Note: A 2D map is a flat representation of your projected
driving directions. A 3D map (shown here) represents
the driving directions with a representation of depth.
2. Tap Address field, enter the physical address
information, and tap Done.
3. Press
and tap Summary to receive both an
outlined map view and a detailed turn by turn
description for navigating to your desired location.
To search nearby locations based on type:
1. Press
and tap
>
> Drive To >
Address.
2. Tap Address field, enter the physical address
information, and tap Done.
3. Press
and tap Search to search for a
location based on a category such as Food/
Coffee, etc.
Using a Local Business Category
The Samsung Intercept™ can also cross-reference your
current location with local business and points of
interest, such as Grocery Stores, Gas Stations, Wi-Fi
Spots, Malls, Hospitals, etc.
182
3D. GPS Navigation
1. Press
and tap
>
> Drive To >
Businesses.
2. Enter a keyword into the Name or Category field to
begin retrieving matches. Once you see a
matching business name, touch the entry.
– or –
Tap the Category field and then choose from one
of the available category entries by touching an
onscreen entry such as: Food/Coffee, Gas Stations,
Gas by Price, Banks/ATMs, WiFi Spots, Hospitals,
etc.
䡲 Entries with more than one available category (a
subcategory) appear with an adjacent gray arrow.
These entries can be expanded and then closed.
3. Tap Search to store your information and begin the
search.
4. Tap a matching entry based upon star ratings and
distances.
To search for the lowest gas prince in your area:
1. Press
and tap
>
> Drive To >
Businesses > Category > Gas By Price.
M580.book Page 183 Monday, April 18, 2011 11:18 AM
2. Touch Search to begin the search.
To create a My Favorites location from a Recent Place:
3. Touch an entry from the list to display a new route
to the selected gas station.
>
> Share & More
2. Tap a previous destination location from the list
and tap Save as Favorites.
Save as Favorites: to save the current location to
your My Favorites list.
Once you have begun using
Sprint Navigation to find your
destination, you can then
either recall those locations
and add them to your list of
favorite destinations or
create a new entry from one
of the available location
categories (Address,
Business, Airport, or
Contacts).
䡲
Sharing a Recent Location with Others
1. Press
and tap
>
GPS Navigation
Recently queried locations can be saved to your My
Favorites list and also shared with other cellular
devices.
> Drive To >
Recent Places.
2. Select an address and press
To create a My Favorites
location from your Current
Location:
and tap
and tap
> My Stuff > Recent Places.
Creating a My Favorites Location
1. Press
1. Press
> share
address.
3. Enter the contact name or phone #.
>
> Record Location.
2. Tap Done to complete the process.
> Share & More
4. Touch Send Now to complete the delivery process.
Configuring Your Navigation Preferences
1. Press
and tap
>
Share & More > Preferences.
>
3D. GPS Navigation
183
M580.book Page 184 Monday, April 18, 2011 11:18 AM
2. Touch an entry to change its current setting:
䡲
General: allows change general settings,
including:
●
●
●
●
●
●
●
●
184
First Name/Last Name: allows you to alter the
current first and last name registered with the
service, as well as email address.
Email: allows you to create an associated
email account for this application.
Region: allows you to assign a current region.
Default is North America.
Language: allows you to assign a current
language. Default is English(US).
Distance Units: allows you to alter the
descriptions used for distances: Km/Meters or
Mi/Ft.
Tips: allows you to display onscreen tips:
Always On or Always Off.
GPS Source: allows you to assign a current
GPS connection source. Default is Internal.
Exit after (minutes): assigns the default
application timeout. This is the timeout interval
when no activity is detected: Never, 5, 10, 20,
or 30.
3D. GPS Navigation
Init Volume: allows you to alter the initial
volume level for the readouts: Very Soft, Soft,
Normal, Loud, or Very Loud.
● Map Colors: allows you to alter the
appearance of the onscreen map: Daytime,
Nightime, or Auto.
䡲 Navigation: lets you change navigation settings,
including:
● Route Style: allows you to choose the method
which is used to provide you directions from
Point A to Point B. The default is Always use
fastest.
● Avoid: allows you to setup obstacles that
should be avoided when determining travel
routes: HOV Lanes, Tools, and Traffic Delays.
Tap Done to set these parameters.
● Moving Maps: allows you to setup a preferred
traffic display view: 2D Maps or 3D Maps
(default).
● BackLight: allows you to assign the backlight
settings: On, Off, or On at Turns.
●
M580.book Page 185 Monday, April 18, 2011 11:18 AM
Traffic Alerts: allows you to setup a traffic alert
notification when these appear on your
current travel route. Choose from On or Off.
䡲 Navigation Audio: lets you change the audio read
out given during your navigation session:
● Settings: allows you to setup the level of detail
used for the directions when spoken: Full
Audio, Instructions Only, or No Audio.
● Language: allows you to select the language
used for the directions when spoken: Sara
(English US) (default) or Maria (Spanish).
● During Phone Call: allows you to setup if
directions are spoken during a phone call:
Suspend (default) or Play.
GPS Navigation
●
Launching the Product Tour
䊳
Press
and tap
>
Share & More > Product Tour.
>
3D. GPS Navigation
185
M580.book Page 186 Monday, April 18, 2011 11:18 AM
M580.book Page 187 Monday, April 18, 2011 11:18 AM
Section 4
Safety and Warranty
Information
M580.book Page 188 Monday, April 18, 2011 11:18 AM
4A. Important Safety
Information
⽧
General Precautions (page 188)
⽧
Maintaining Safe Use of and Access to Your Phone
(page 189)
⽧
Using Your Phone With a Hearing Aid Device (page 190)
⽧
Caring for the Battery (page 192)
⽧
Radio Frequency (RF) Energy (page 193)
⽧
Samsung Mobile Products and Recycling (page 195)
⽧
Owner’s Record (page 195)
⽧
User Guide Proprietary Notice (page 195)
This phone guide contains important operational and
safety information that will help you safely use your
phone. Failure to read and follow the information
provided in this phone guide may result in serious
bodily injury, death, or property damage.
188
4A. Important Safety Information
General Precautions
There are several simple guidelines to operating your phone
properly and maintaining safe, satisfactory service.
䢇 To maximize performance, do not touch the bottom portion
of your phone where the internal antenna is located while
using the phone.
䢇 Speak directly into the mouthpiece.
䢇 Avoid exposing your phone and accessories to rain or liquid
spills. If your phone does get wet, immediately turn the
power off and remove the battery.
䢇 Do not expose your phone to direct sunlight for extended
periods of time (such as on the dashboard of a car).
䢇 Although your phone is quite sturdy, it is a complex piece of
equipment and can be broken. Avoid dropping, hitting,
bending, or sitting on it.
䢇 Any changes or modifications to your phone not expressly
approved in this document could void your warranty for this
equipment and void your authority to operate this
equipment.
Note: For the best care of your phone, only Sprint-authorized
personnel should service your phone and accessories. Failure
to do so may be dangerous and void your warranty.
M580.book Page 189 Monday, April 18, 2011 11:18 AM
Do Not Rely on Your Phone for Emergency Calls
Using Your Phone Near Other Electronic Devices
Most modern electronic equipment is shielded from radio
frequency (RF) signals. However, RF signals from wireless
phones may affect inadequately shielded electronic
equipment.
Mobile phones operate using radio signals, which cannot
guarantee connection in all conditions. Therefore you should
never rely solely upon any mobile phone for essential
communication (e.g., medical emergencies). Emergency calls
may not be possible on all cellular networks or when certain
network services or mobile phone features are in use. Check
with your local service provider for details.
RF signals may affect improperly installed or inadequately
shielded electronic operating systems or entertainment
systems in motor vehicles. Check with the manufacturer or their
representative to determine if these systems are adequately
shielded from external RF signals. Also check with the
manufacturer regarding any equipment that has been added to
your vehicle.
Using Your Phone While Driving
Consult the manufacturer of any personal medical devices,
such as pacemakers and hearing aids, to determine if they are
adequately shielded from external RF signals.
Talking on your phone while driving (or operating the phone
without a hands-free device) is prohibited in some jurisdictions.
Laws vary as to specific restrictions. Remember that safety
always comes first.
Tip: Purchase an optional hands-free accessory at your local Sprint
Store, or call Sprint at 1-866-866-7509. You can also dial # 2 2 2
on your phone.
Following Safety Guidelines
To operate your phone safely and efficiently, always follow any
special regulations in a given area. Turn your phone off in areas
where use is forbidden or when it may cause interference or
danger.
Note: Always turn off the phone in healthcare facilities, and request
permission before using the phone near medical equipment.
Turning Off Your Phone Before Flying
Turn off your phone before boarding any aircraft. To prevent
possible interference with aircraft systems, the U.S. Federal
Aviation Administration (FAA) regulations require you to have
permission from a crew member to use your phone while
the plane is on the ground. To prevent any risk of interference,
FCC regulations prohibit using your phone while the plane is in
the air.
4A. Important Safety Information
Important Safety Information
Maintaining Safe Use of and Access
to Your Phone
189
M580.book Page 190 Monday, April 18, 2011 11:18 AM
Turning Off Your Phone in Dangerous Areas
To avoid interfering with blasting operations, turn your phone
off when in a blasting area or in other areas with signs
indicating two-way radios should be turned off. Construction
crews often use remote-control RF devices to set off explosives.
Turn your phone off when you’re in any area that has a
potentially explosive atmosphere. Although it’s rare, your phone
and accessories could generate sparks. Sparks can cause an
explosion or fire, resulting in bodily injury or even death. These
areas are often, but not always, clearly marked. They include:
䡲 Fueling areas such as gas stations.
䡲 Below deck on boats.
䡲 Fuel or chemical transfer or storage facilities.
䡲 Areas where the air contains chemicals or particles such
as grain, dust, or metal powders.
䡲 Any other area where you would normally be advised to
turn off your vehicle’s engine.
Note: Never transport or store flammable gas, flammable liquids, or
explosives in the compartment of your vehicle that contains
your phone or accessories.
Restricting Children’s Access to Your Phone
Your phone is not a toy. Do not allow children to play with it as
they could hurt themselves and others, damage the phone or
make calls that increase your Sprint invoice.
190
4A. Important Safety Information
Please Note the Following Information When Using Your
Handset
1. WARNING REGARDING DISPLAY
䡲
The display on your handset is made of glass or acrylic
and could break if your handset is dropped or if it
receives significant impact. Do not use if screen is broken
or cracked as this could cause injury to you.
2. WARRANTY DISCLAIMER: PROPER USE OF A TOUCH
SCREEN HANDSET
If your handset has a touchscreen display, please note
that a touchscreen responds best to a light touch from
the pad of your finger or a non-metallic stylus. Using
excessive force or a metallic object when pressing on the
touchscreen may damage the tempered glass surface
and void the warranty. For more information, please refer
to the “Manufacturer’s Warranty” on page 196.
䡲
Using Your Phone With a Hearing
Aid Device
A number of Sprint phones have been tested for hearing aid
device compatibility. When some wireless phones are used
with certain hearing devices (including hearing aids and
cochlear implants), users may detect a noise which can
interfere with the effectiveness of the hearing device.
M580.book Page 191 Monday, April 18, 2011 11:18 AM
Ratings have been developed for mobile phones to assist
hearing device users find phones that may be compatible with
their hearing device. Not all phones have been rated for
compatibility with hearing devices. Phones that have been
rated have a label located on the box. Your SPH-M580 has an
M4 and T3 rating.
These ratings are not guarantees. Results will vary depending
on the user’s hearing device and individual type and degree of
hearing loss. If a hearing device is particularly vulnerable to
interference noise; even a phone with a higher rating may still
cause unacceptable noise levels in the hearing device. Trying
out the phone with your hearing device is the best way to
evaluate it for your personal needs.
M-Ratings: Phones rated M3 or M4 meet FCC requirements for
hearing aid compatibility and are likely to generate less
interference to hearing devices than unrated phones. (M4 is the
better/higher of the two ratings.)
T-Ratings: Phones rated T3 or T4 meet FCC requirements and
are likely to be more usable with a hearing device’s telecoil
(“T Switch”or “Telephone Switch”) than unrated phones. (T4 is
the better/higher of the two ratings. Note that not all hearing
devices have telecoils in them.)
Note: New Technologies, Including Wi-Fi
This phone has been tested and rated for use with hearing
aids for some of the wireless technologies that it uses. However,
there may be newer wireless technologies (including Wi-Fi)
used in this phone that have not been tested for use with
hearing aids.
Hearing aid devices may also be measured for immunity to
interference noise from wireless phones and should have
ratings similar to phones. Ask your hearing healthcare
professional for the rating of your hearing aid. Add the rating of
your hearing aid and your phone to determine probable
usability:
䢇 Any combined rating equal to or greater than six offers
excellent use.
䢇 Any combined rating equal to five is considered normal use.
䢇 Any combined rating equal to four is considered usable.
Thus, if you pair an M3 hearing aid with an M3 phone, you will
have a combined rating of six for “excellent use.” This is
synonymous for T ratings.
Sprint further suggests you experiment with multiple phones
(even those not labeled M3/T3 or M4/T4) while in the store to
find the one that works best with your hearing aid device.
Should you experience interference or find the quality of
service unsatisfactory after purchasing your phone, promptly
return it to the store within 30 days of purchase. (A restocking
4A. Important Safety Information
Important Safety Information
Some hearing devices are more immune than others to this
interference noise, and phones also vary in the amount of
interference noise they may generate. ANSI standard C63.19
was developed to provide a standardized means of measuring
both wireless phone and hearing devices to determine usability
rating categories for both.
191
M580.book Page 192 Monday, April 18, 2011 11:18 AM
fee may be applied to exchanges. Visit www.sprint.com/returns
for details.) More information about hearing aid compatibility
may be found at: www.fcc.gov, www.fda.gov, and
www.accesswireless.org.
Getting the Best Hearing Device
Experience With Your Phone
To further minimize interference:
䢇 Set the phone’s display and keypad backlight settings to
ensure the minimum time interval:
1. Press
>
Screen timeout.
and tap
> Display >
2. Highlight the minimum time interval setting.
䢇
䢇
Position the phone so the internal antenna is farthest from
your hearing aid.
Move the phone around to find the point with least
interference.
䢇
䢇
䢇
䢇
䢇
䢇
䢇
Caring for the Battery
Protecting Your Battery
The guidelines listed below help you get the most out of your
battery’s performance.
䢇 Recently there have been some public reports of wireless
phone batteries overheating, catching fire, or exploding. It
192
4A. Important Safety Information
䢇
appears that many, if not all, of these reports involve
counterfeit or inexpensive, aftermarket-brand batteries with
unknown or questionable manufacturing standards. Sprint is
not aware of similar problems with Sprint phones resulting
from the proper use of batteries and accessories approved
by Sprint or the manufacturer of your phone. Use only Sprintapproved or manufacturer-approved batteries and
accessories found at Sprint Stores or through your phone’s
manufacturer, or call 1-866-866-7509 to order. They’re also
available at www.sprint.com — click Accessories. Buying the
right batteries and accessories is the best way to ensure
they’re genuine and safe.
In order to avoid damage, charge the battery only in
temperatures that range from 32° F to 113° F (0° C to 45° C).
Don’t use the battery charger in direct sunlight or in high
humidity areas, such as the bathroom.
Never dispose of the battery by incineration.
Keep the metal contacts on top of the battery clean.
Don’t attempt to disassemble or short-circuit the battery.
The battery may need recharging if it has not been used for
a long period of time.
It’s best to replace the battery when it no longer provides
acceptable performance. It can be recharged hundreds of
times before it needs replacing.
Don’t store the battery in high temperature areas for long
periods of time. It’s best to follow these storage rules:
䡲 Less than one month:
-4° F to 140° F (-20° C to 60° C)
䡲 More than one month:
-4° F to 113° F (-20° C to 45° C)
M580.book Page 193 Monday, April 18, 2011 11:18 AM
Do not handle a damaged or leaking Li-Ion battery as you can
be burned.
For safe disposal options of your Li-Ion batteries, contact your
nearest Sprint authorized service center.
Special Note: Be sure to dispose of your battery properly. In
some areas, the disposal of batteries in household or business
trash may be prohibited.
Radio Frequency (RF) Energy
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver. When
it’s turned on, it receives and transmits radio frequency (RF)
signals. When you use your phone, the system handling your
call controls the power level. This power can range from 0.006
watt to 0.2 watt in digital mode.
Knowing Radio Frequency Safety
The design of your phone complies with updated NCRP
standards described below.
In 1991–92, the Institute of Electrical and Electronics Engineers
(IEEE) and the American National Standards Institute (ANSI)
joined in updating ANSI’s 1982 standard for safety levels with
respect to human exposure to RF signals. More than 120
scientists, engineers and physicians from universities,
government health agencies and industries developed this
updated standard after reviewing the available body of
research. In 1993, the Federal Communications Commission
(FCC) adopted this updated standard in a regulation. In August
1996, the FCC adopted hybrid standard consisting of the
existing ANSI/IEEE standard and the guidelines published by
the National Council of Radiation Protection and
Measurements (NCRP).
Body-Worn Operation
To maintain compliance with FCC RF exposure guidelines, if
you wear a handset on your body, use a Sprint-supplied or
Sprint-approved carrying case, holster or other body-worn
accessory. If you do not use a body-worn accessory, ensure
the antenna is at least 7/16 inch (1.5 centimeters) from your
body when transmitting. Use of non-Sprint-approved
accessories may violate FCC RF exposure guidelines.
For more information about RF exposure, visit the FCC website
at www.fcc.gov.
Specific Absorption Rates (SAR) for Wireless
Phones
The SAR value corresponds to the relative amount of RF
energy absorbed into the head of a user of a wireless handset.
The SAR value of a phone is the result of an extensive testing,
measuring and calculation process. It does not represent how
much RF the phone emits. All phone models are tested at their
highest value in strict laboratory settings. But when in
operation, the SAR of a phone can be substantially less than
4A. Important Safety Information
Important Safety Information
Disposal of Lithium Ion (Li-Ion) Batteries
193
M580.book Page 194 Monday, April 18, 2011 11:18 AM
the level reported to the FCC. This is because of a variety of
factors including its proximity to a base station antenna, phone
design and other factors. What is important to remember is that
each phone meets strict federal guidelines. Variations in SARs
do not represent a variation in safety.
All phones must meet the federal standard, which incorporates
a substantial margin of safety. As stated above, variations in
SAR values between different model phones do not mean
variations in safety. SAR values at or below the federal standard
of 1.6 W/kg are considered safe for use by the public.
The highest reported SAR values of the SPH-M580 are:
Cellular CDMA mode (Part 22):
Head: 0.30 W/kg; Body-worn: 0.75 W/kg
PCS mode (Part 24):
Head: 0.54 W/kg; Body-worn: 1.01 W/kg
FCC Radio Frequency Emission
This phone meets the FCC Radio Frequency Emission
Guidelines.
FCC ID number: A3LSPHM580.
More information on the phone’s SAR can be found from the
following FCC website: http://www.fcc.gov/oet/ea/.
194
4A. Important Safety Information
FCC Notice
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may
cause undesired operation.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur
in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
䢇 Reorient the direction of the internal antenna.
M580.book Page 195 Monday, April 18, 2011 11:18 AM
䢇
䢇
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
Samsung Mobile Products and
Recycling
Samsung cares for the environment and encourages its
customers to recycle Samsung mobile devices and genuine
Samsung accessories, and other unwanted electronics, in
accordance with local regulations and through an approved
recycler. Proper disposal of your mobile device and its battery
is not only important for safety, it benefits the environment.
Batteries must be recycled or disposed of properly.
Owner’s Record
The model number, regulatory number, and serial number are
located on a nameplate inside the battery compartment.
Record the serial number in the space provided below. This will
be helpful if you need to contact us about your phone in the
future.
Model: SPH-M580 Replenish™
Serial No.:
User Guide Proprietary Notice
Nuance®, VSuite™, and the Nuance logo are trademarks or
registered trademarks of Nuance Communications, Inc., or its
affiliates in the United States and/or other countries.
User Guide template version 9a_FM (April 2009)
Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to:
www.samsung.com/recyclingdirect or call, 1-877-278-0799.
WARNING: Never dispose of batteries in a fire because they
may explode.
4A. Important Safety Information
Important Safety Information
䢇
195
M580.book Page 196 Monday, April 18, 2011 11:18 AM
Manufacturer’s Warranty
4B. Manufacturer’s Warranty
⽧
Manufacturer’s Warranty (page 196)
Your phone has been designed to provide you with
reliable, worry-free service. If for any reason you have a
problem with your equipment, please refer to the
manufacturer’s warranty in this section.
For information regarding the terms and conditions of
service for your phone, please visit www.sprint.com or
call Sprint Customer Service at 1-888-211-4727.
Note: In addition to the warranty provided by your phone’s
manufacturer, which is detailed on the following pages, Sprint
offers a number of optional plans to cover your equipment for
non-warranty claims. Sprint Total Equipment Protection
provides the combined coverage of the Sprint Equipment
Replacement Program and the Sprint Equipment Service
and Repair Program, both of which are available separately.
Each of these programs may be signed up for within 30 days
of activating your phone. For more details, please visit your
nearest Sprint Store or call Sprint at 1-800-584-3666.
196
Manufacturer’s Warranty
STANDARD LIMITED WARRANTY
What is Covered and For How Long?
SAMSUNG TELECOMMUNICATIONS AMERICA, LLC
("SAMSUNG") warrants to the original purchaser ("Purchaser")
that SAMSUNG's phones and accessories ("Products") are free
from defects in material and workmanship under normal use
and service for the period commencing upon the date of
purchase and continuing for the following specified period of
time after that date:
Phone
1 Year
Batteries
1 Year
Leather Case
90 Days
Other Phone Accessories
1 Year
What is Not Covered?
This Limited Warranty is conditioned upon proper use of
Product by Purchaser. This Limited Warranty does not cover:
(a) defects or damage resulting from accident, misuse,
abnormal use, abnormal conditions, improper storage,
exposure to moisture or dampness, neglect, unusual physical,
electrical or electromechanical stress, or defects in
appearance, cosmetic, decorative or structural items, including
framing, and any non-operative parts unless caused by
SAMSUNG; (b) defects or damage resulting from excessive
force or use of a metallic object when pressing on a touch
screen; (c) equipment that has the serial number or the
enhancement data code removed, defaced, damaged, altered
or made illegible; (d) any plastic surfaces or other externally
exposed parts that are scratched or damaged due to normal
use; (e) malfunctions resulting from the use of Product in
conjunction or connection with accessories, products, or
ancillary/peripheral equipment not furnished or approved by
SAMSUNG; (f) defects or damage from improper testing,
operation, maintenance, installation, service, or adjustment not
furnished or approved by SAMSUNG; (g) defects or damage
from external causes such as collision with an object, or from
fire, flooding, sand, dirt, windstorm, lightning, earthquake, or
from exposure to weather conditions, or battery leakage, theft,
blown fuse, or improper use of any electrical source; (h) defects
or damage caused by cellular signal reception or transmission,
or viruses or other software problems introduced into the
Product; (j) any other acts which are not the fault of SAMSUNG;
or (i) Product used or purchased outside the United States.
This Limited Warranty covers batteries only if battery capacity
falls below 80% of rated capacity or the battery leaks, and this
Limited Warranty does not cover any battery if (i) the battery
has been charged by a battery charger not specified or
approved by SAMSUNG for charging the battery, (ii) any of the
seals on the battery are broken or show evidence of tampering,
or (iii) the battery has been used in equipment other than the
SAMSUNG phone for which it is specified.
What are SAMSUNG's Obligations?
During the applicable warranty period, SAMSUNG will repair or
replace, at SAMSUNG's sole option, without charge to
Purchaser, any defective component part of Product. To obtain
service under this Limited Warranty, Purchaser must return
Product to an authorized phone service facility in an adequate
container for shipping, accompanied by Purchaser's sales
receipt or comparable substitute proof of sale showing the
original date of purchase, the serial number of Product and the
sellers' name and address. To obtain assistance on where to
deliver the Product, call Samsung Customer Care at
1-888-987-4357. Upon receipt, SAMSUNG will promptly repair
or replace the defective Product. SAMSUNG may, at
SAMSUNG's sole option, use rebuilt, reconditioned, or new
parts or components when repairing any Product or replace
Product with a rebuilt, reconditioned or new Product. Repaired/
replaced cases, pouches and holsters will be warranted for a
period of ninety (90) days. All other repaired/replaced Product
will be warranted for a period equal to the remainder of the
original Limited Warranty on the original Product or for 90 days,
whichever is longer. All replaced parts, components, boards
and equipment shall become the property of SAMSUNG. If
SAMSUNG determines that any Product is not covered by this
Limited Warranty, Purchaser must pay all parts, shipping, and
labor charges for the repair or return of such Product.
Manufacturer’s Warranty
Warranty
M580.book Page 197 Monday, April 18, 2011 11:18 AM
197
M580.book Page 198 Monday, April 18, 2011 11:18 AM
What Are The Limits On Samsung's Warranty/liability?
SET FORTH IN THE EXPRESS WARRANTY CONTAINED
HEREIN, PURCHASER TAKES THE PRODUCT "AS IS," AND
SAMSUNG MAKES NO WARRANTY OR REPRESENTATION
AND THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED,
STATUTORY OR OTHERWISE, OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT
LIMITED TO:
䢇 THE MERCHANTABILITY OF THE PRODUCT OR ITS
FITNESS FOR ANY PARTICULAR PURPOSE OR USE;
䢇 WARRANTIES OF TITLE OR NON-INFRINGEMENT;
䢇 DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF
THE PRODUCT;
䢇 THE WORKMANSHIP OF THE PRODUCT OR THE
COMPONENTS CONTAINED THEREIN; OR
䢇 COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR
CONTRACT PERTAINING THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL
BE CONSTRUED TO CREATE AN EXPRESS WARRANTY OF
ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT.
ALL IMPLIED WARRANTIES AND CONDITIONS THAT MAY
ARISE BY OPERATION OF LAW, INCLUDING IF APPLICABLE
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY
LIMITED TO THE SAME DURATION OF TIME AS THE EXPRESS
WRITTEN WARRANTY STATED HEREIN. SOME STATES DO
NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED
198
Manufacturer’s Warranty
WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT
APPLY TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM
THE PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE
THE PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM
THE USE OR LOSS OF USE OF THE PRODUCT OR FROM THE
BREACH OF THE EXPRESS WARRANTY, INCLUDING
INCIDENTAL, SPECIAL, CONSEQUENTIAL OR SIMILAR
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR
BENEFITS, OR FOR DAMAGES ARISING FROM ANY TORT
(INCLUDING NEGLIGENCE OR GROSS NEGLIGENCE) OR
FAULT COMMITTED BY SAMSUNG, ITS AGENTS OR
EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR FOR
ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY
OTHER PARTY. SOME STATES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR
EXCLUSION MAY NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND
YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM
STATE TO STATE. THIS LIMITED WARRANTY SHALL NOT
EXTEND TO ANYONE OTHER THAN THE ORIGINAL
PURCHASER OF THIS PRODUCT AND STATES PURCHASER'S
EXCLUSIVE REMEDY. IF ANY PORTION OF THIS LIMITED
WARRANTY IS HELD ILLEGAL OR UNENFORCEABLE BY
REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR
UNENFORCEABILITY SHALL NOT AFFECT THE
ENFORCEABILITY FOR THE REMAINDER OF THIS LIMITED
M580.book Page 199 Monday, April 18, 2011 11:18 AM
statements such as dealer advertising or presentation, whether
oral or written, do not constitute warranties by SAMSUNG and
should not be relied upon.
THE PARTIES UNDERSTAND THAT THE PURCHASER MAY
USE THIRD-PARTY SOFTWARE OR EQUIPMENT IN
CONJUNCTION WITH THE PRODUCT. SAMSUNG MAKES NO
WARRANTIES OR REPRESENTATIONS AND THERE ARE NO
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR
OTHERWISE, AS TO THE QUALITY, CAPABILITIES,
OPERATIONS, PERFORMANCE OR SUITABILITY OF ANY
THIRD-PARTY SOFTWARE OR EQUIPMENT, WHETHER SUCH
THIRD-PARTY SOFTWARE OR EQUIPMENT IS INCLUDED
WITH THE PRODUCT DISTRIBUTED BY SAMSUNG OR
OTHERWISE, INCLUDING THE ABILITY TO INTEGRATE ANY
SUCH SOFTWARE OR EQUIPMENT WITH THE PRODUCT.
THE QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE
AND SUITABILITY OF ANY SUCH THIRD-PARTY SOFTWARE
OR EQUIPMENT LIE SOLELY WITH THE PURCHASER AND
THE DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH
THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE
MAY BE.
Samsung Telecommunications America, LLC
This Limited Warranty allocates risk of Product failure between
Purchaser and SAMSUNG, and SAMSUNG's Product pricing
reflects this allocation of risk and the limitations of liability
contained in this Limited Warranty. The agents, employees,
distributors, and dealers of SAMSUNG are not authorized to
make modifications to this Limited Warranty, or make additional
warranties binding on SAMSUNG. Accordingly, additional
Warranty
WARRANTY WHICH PURCHASER ACKNOWLEDGES IS AND
WILL ALWAYS BE CONSTRUED TO BE LIMITED BY ITS TERMS
OR AS LIMITED AS THE LAW PERMITS.
1301 E. Lookout Drive
Richardson, Texas 75082
Phone: 1-800-SAMSUNG
Phone: 1-888-987-HELP (4357)
©
2011 Samsung Telecommunications America, LLC. All rights
reserved.
No reproduction in whole or in part allowed without prior
written approval. Specifications and availability subject to
change without notice. [021710]
End User License Agreement for Software
IMPORTANT. READ CAREFULLY: This End User License
Agreement ("EULA") is a legal agreement between you (either
an individual or a single entity) and Samsung Electronics Co.,
Ltd. for software owned by Samsung Electronics Co., Ltd. and
its affiliated companies and its third party suppliers and
licensors that accompanies this EULA, which includes
computer software and may include associated media, printed
materials, "online" or electronic documentation ("Software").
BY CLICKING THE "I ACCEPT" BUTTON (OR IF YOU BYPASS
OR OTHERWISE DISABLE THE "I ACCEPT", AND STILL
INSTALL, COPY, DOWNLOAD, ACCESS OR OTHERWISE USE
Manufacturer’s Warranty
199
M580.book Page 200 Monday, April 18, 2011 11:18 AM
THE SOFTWARE), YOU AGREE TO BE BOUND BY THE
TERMS OF THIS EULA. IF YOU DO NOT ACCEPT THE TERMS
IN THIS EULA, YOU MUST CLICK THE "DECLINE" BUTTON,
DISCONTINUE USE OF THE SOFTWARE.
1. GRANT OF LICENSE. Samsung grants you the following
rights provided that you comply with all terms and conditions of
this EULA: You may install, use, access, display and run one
copy of the Software on the local hard disk(s) or other
permanent storage media of one computer and use the
Software on a single computer or a mobile device at a time,
and you may not make the Software available over a network
where it could be used by multiple computers at the same
time. You may make one copy of the Software in machinereadable form for backup purposes only; provided that the
backup copy must include all copyright or other proprietary
notices contained on the original.
2. RESERVATION OF RIGHTS AND OWNERSHIP. Samsung
reserves all rights not expressly granted to you in this EULA.
The Software is protected by copyright and other intellectual
property laws and treaties. Samsung or its suppliers own the
title, copyright and other intellectual property rights in the
Software. The Software is licensed, not sold.
3. LIMITATIONS ON END USER RIGHTS. You may not reverse
engineer, decompile, disassemble, or otherwise attempt to
discover the source code or algorithms of, the Software (except
and only to the extent that such activity is expressly permitted
by applicable law notwithstanding this limitation), or modify, or
disable any features of, the Software, or create derivative works
200
Manufacturer’s Warranty
based on the Software. You may not rent, lease, lend,
sublicense or provide commercial hosting services with the
Software.
4. CONSENT TO USE OF DATA. You agree that Samsung and
its affiliates may collect and use technical information gathered
as part of the product support services related to the Software
provided to you, if any, related to the Software. Samsung may
use this information solely to improve its products or to provide
customized services or technologies to you and will not
disclose this information in a form that personally identifies you.
5. UPGRADES. This EULA applies to updates, supplements
and add-on components (if any) of the Software that Samsung
may provide to you or make available to you after the date you
obtain your initial copy of the Software, unless we provide other
terms along with such upgrade. To use Software identified as
an upgrade, you must first be licensed for the Software
identified by Samsung as eligible for the upgrade. After
upgrading, you may no longer use the Software that formed the
basis for your upgrade eligibility.
6. SOFTWARE TRANSFER. You may not transfer this EULA or
the rights to the Software granted herein to any third party
unless it is in connection with the sale of the mobile device
which the Software accompanied. In such event, the transfer
must include all of the Software (including all component parts,
the media and printed materials, any upgrades, this EULA) and
you may not retain any copies of the Software. The transfer may
not be an indirect transfer, such as a consignment. Prior to the
transfer, the end user receiving the Software must agree to all
the EULA terms.
7. EXPORT RESTRICTIONS. You acknowledge that the Software
is subject to export restrictions of various countries. You agree
to comply with all applicable international and national laws
that apply to the Software, including the U.S. Export
Administration Regulations, as well as end user, end use, and
destination restrictions issued by U.S. and other governments.
8. TERMINATION. This EULA is effective until terminated. Your
rights under this License will terminate automatically without
notice from Samsung if you fail to comply with any of the terms
and conditions of this EULA. Upon termination of this EULA,
you shall cease all use of the Software and destroy all copies,
full or partial, of the Software.
9. DISCLAIMER OF WARRANTIES. You expressly acknowledge
and agree that use of the Software is at your sole risk and that
the entire risk as to satisfactory quality, performance, accuracy
and effort is with you. TO THE MAXIMUM EXTENT PERMITTED
BY APPLICABLE LAW, THE SOFTWARE IS PROVIDED "AS IS"
AND WITH ALL FAULTS AND WITHOUT WARRANTY OF ANY
KIND, AND SAMSUNG AND ITS LICENSORS (COLLECTIVELY
REFERRED TO AS "SAMSUNG" FOR THE PURPOSES OF
SECTIONS 9, 10 and 11) HEREBY DISCLAIM ALL
WARRANTIES AND CONDITIONS WITH RESPECT TO THE
SOFTWARE, EITHER EXPRESS, IMPLIED OR STATUTORY,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES AND/OR CONDITIONS OF MERCHANTABILITY,
OF SATISFACTORY QUALITY OR WORKMANLIKE EFFORT, OF
FITNESS FOR A PARTICULAR PURPOSE, OF RELIABILITY OR
AVAILABILITY, OF ACCURACY, OF LACK OF VIRUSES, OF
QUIET ENJOYMENT, AND NON-INFRINGEMENT OF THIRD
PARTY RIGHTS. SAMSUNG DOES NOT WARRANT AGAINST
INTERFERENCE WITH YOUR ENJOYMENT OF THE
SOFTWARE, THAT THE FUNCTIONS CONTAINED IN THE
SOFTWARE WILL MEET YOUR REQUIREMENTS, THAT THE
OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED
OR ERROR-FREE, OR THAT DEFECTS IN THE SOFTWARE
WILL BE CORRECTED. NO ORAL OR WRITTEN INFORMATION
OR ADVICE GIVEN BY SAMSUNG OR A SAMSUNG
AUTHORIZED REPRESENTATIVE SHALL CREATE A
WARRANTY. SHOULD THE SOFTWARE PROVE DEFECTIVE,
YOU ASSUME THE ENTIRE COST OF ALL NECESSARY
SERVICING, REPAIR OR CORRECTION. SOME
JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF
IMPLIED WARRANTIES OR LIMITATIONS ON APPLICABLE
STATUTORY RIGHTS OF A CONSUMER, SO THESE
EXCLUSIONS AND LIMITATIONS MAY NOT APPLY TO YOU.
Warranty
M580.book Page 201 Monday, April 18, 2011 11:18 AM
10. EXCLUSION OF INCIDENTAL, CONSEQUENTIAL AND
CERTAIN OTHER DAMAGES. TO THE EXTENT NOT
PROHIBITED BY LAW, IN NO EVENT SHALL SAMSUNG BE
LIABLE FOR PERSONAL INJURY, OR ANY INCIDENTAL,
SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES
WHATSOEVER, OR FOR LOSS OF PROFITS, LOSS OF DATA,
BUSINESS INTERRUPTION, OR FOR ANY PECUNIARY
DAMAGES OR LOSSES, ARISING OUT OF OR RELATED TO
YOUR USE OR INABILITY TO USE THE SOFTWARE, THE
Manufacturer’s Warranty
201
M580.book Page 202 Monday, April 18, 2011 11:18 AM
PROVISION OF OR FAILURE TO PROVIDE SUPPORT OR
OTHER SERVICES, INFORMATION, SOFTWARE, AND
RELATED CONTENT THROUGH THE SOFTWARE OR
OTHERWISE ARISING OUT OF THE USE OF THE SOFTWARE,
OR OTHERWISE UNDER OR IN CONNECTION WITH ANY
PROVISION OF THIS EULA, HOWEVER CAUSED,
REGARDLESS OF THE THEORY OF LIABILITY (CONTRACT,
TORT OR OTHERWISE) AND EVEN IF SAMSUNG HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME
JURISDICTIONS DO NOT ALLOW THE LIMITATION OF
LIABILITY FOR PERSONAL INJURY, OR OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THIS LIMITATION MAY NOT
APPLY TO YOU.
11. LIMITATION OF LIABILITY. Notwithstanding any damages
that you might incur for any reason whatsoever (including,
without limitation, all damages referenced herein and all direct
or general damages in contract or anything else), the entire
liability of Samsung under any provision of this EULA and your
exclusive remedy hereunder shall be limited to the greater of
the actual damages you incur in reasonable reliance on the
Software up to the amount actually paid by you for the Software
or US$5.00. The foregoing limitations, exclusions and
disclaimers (including Sections 9, 10 and 11) shall apply to the
maximum extent permitted by applicable law, even if any
remedy fails its essential purpose.
202
Manufacturer’s Warranty
12. U.S. GOVERNMENT END USERS. The Software is licensed
only with "restricted rights" and as "commercial items"
consisting of "commercial software" and "commercial software
documentation" with only those rights as are granted to all
other end users pursuant to the terms and conditions herein.
13. APPLICABLE LAW. This EULA is governed by the laws of
TEXAS, without regard to conflicts of laws principles. This EULA
shall not be governed by the UN Convention on Contracts for
the International Sale of Goods, the application of which is
expressly excluded. If a dispute, controversy or difference is not
amicably settled, it shall be finally resolved by arbitration in
Seoul, Korea in accordance with the Arbitration Rules of the
Korean Commercial Arbitration Board. The award of arbitration
shall be final and binding upon the parties.
14. ENTIRE AGREEMENT; SEVERABILITY. This EULA is the
entire agreement between you and Samsung relating to the
Software and supersedes all prior or contemporaneous oral or
written communications, proposals and representations with
respect to the Software or any other subject matter covered by
this EULA. If any provision of this EULA is held to be void,
invalid, unenforceable or illegal, the other provisions shall
continue in full force and effect.
Precautions for Transfer and Disposal
If data stored on this device is deleted or reformatted using the
standard methods, the data only appears to be removed on a
superficial level, and it may be possible for someone to retrieve
and reuse the data by means of special software.
M580.book Page 203 Monday, April 18, 2011 11:18 AM
©
2011 Samsung Telecommunications America. All rights
reserved.
No reproduction in whole or in part allowed without prior
written approval. Specifications and availability subject to
change without notice.
Warranty
To avoid unintended information leaks and other problems of
this sort, it is recommended that the device be returned to
Samsung’s Customer Care Center for an Extended File System
(EFS) Clear which will eliminate all user memory and return all
settings to default settings. Please contact the Samsung
Customer Care Center for details.
Important: Please provide warranty information (proof of
purchase) to Samsung’s Customer Care Center
in order to provide this service at no charge. If the
warranty has expired on the device, charges may
apply.
Customer Care Center:
1000 Klein Rd.
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
Samsung Telecommunications America, LLC:
1301 East Lookout Drive
Richardson, Texas 75082
Phone: 1-800-SAMSUNG (726-7864)
Phone: 1-888-987-HELP (4357)
Important: If you are using a handset other than a standard
numeric dialpad, dial the numbers listed in
brackets.
Manufacturer’s Warranty
203
M580.book Page 204 Monday, April 18, 2011 11:18 AM
Index
Numerics
3-Way Call 45, 137
A
Activation 4
Adapter
microSD Card 111
Add 2 Sec Pause 42
Add Account 66
Add to Home screen 35
Airplane Mode 69
Activating 69
Deactivating 70
Alarm
Customizing the Onscreen
Clock 100
Delete an Existing Alarm 100
Alarm Clock
Creating a New Alarm 99
Alarm volume 59
Amazon
Purchasing and
Downloading Music 172
Amount to Synchronize 66, 162
Android Market 164
Accessing 164
Downloads 102, 165
Installing a Google
Application 164
Launching a Google
Application 165
Redownloading a Paid
Application 170
Reinstalling a Google
Application 165
Selecting a Google
Application 164
Animation 61
Answering Calls 42
Applications 31, 166
Applications Tab
Using 30
Assigning Pictures 117
Audible Touch Notifications 59
Audible selection 59
Screen lock sounds 59
Auto-Rotate Feature 38
Auto-rotate Screen 39
Auto-sync 164
Enabling 64
B
Back Key 24
Backing Up Text Messages
102
Backlight 61
Keyboard 62
Backup Your Data 101
Battery 20–23
Capacity 21
Charging 21
Disposal 193
Extending Battery Life 23
Installing 21
Index
Index
M580.book Page 205 Monday, April 18, 2011 11:18 AM
205
M580.book Page 206 Monday, April 18, 2011 11:18 AM
Bluetooth 120–125
Accessing the Paired
Device’s Settings 124
Changing Your Bluetooth
Name 122
Deleting Paired Devices 123
Disconnecting Paired
Devices 123
Discoverable 122
Making Your Device Visible
122
Pairing 122
Scanning for Bluetooth
Devices 122
Sending Items 124
Settings 121
Brightness 62
Browser
Adding Bookmarks to Home
Screen 148
Clear cache 146
Clear history 146
206
Index
Clear Location Access 147
Cookies 146
Creating Bookmarks 147
Creating Bookmarks from
other Tabs 148
Creating Website Settings
147
Default zoom 145
Enable Javascript 145
Enable Plug-ins 145
Home Page 147
Landscape-Only Display 145
Navigation 144
Page Settings 145
Passwords 146
Pop-up Windows 145
Privacy Settings 146
Resetting to Default 147
Security Settings 146
Select Text 144
Selecting Onscreen Text 144
Text Size 145
Browser Menu 143–148
C
Calculator 100
Advanced panel 100
Calendar 93–98
Adding Events 93
Event Reminders 96
Call
Add call 45
Merge Calls 45
Three-way call 45
Call Forwarding 137
Call Log 78–83
Altering a Number 82
Checking a Missed Call 81
Editing a Number 83
Erasing 83
Making a Call 81
Options 80
Saving a Number 82
Call Waiting 136
Caller ID 135
Calling in Lock Mode 74
Camcorder
Settings 118, 119
Share 119
Video Quality 119
YouTube 119
Camera 114–119
see also Pictures
Gallery 116, 118
Image Settings 116
Picture Quality 115
Picture Size 115
Settings 115
Store location in pictures 115
Taking Pictures 114
Clear Data 77
Clear Default 77
Clear Location Access 147
Clock 99
Contact Icon 117
Contacts 84–92
Adding a Number 90
Adding an Entry 84
Adding Entries to Your
Favorites 92
Assigning a Picture 91
Assigning a Picture from
Device 91
Assigning a Picture from
online Gmail 91
Assigning Ringers 90
Contact Menu Options 88
Deleting Entries 91
Dialing From 48
Editing 89
Editing a Number 90
Entry Options 89
Saving a Phone Number 86
Sending Via Bluetooth 124
Corporate Email 159
Account Management
Settings 66
Account Settings 161
Account Syncronization 65
ActiveSync Settings 161
Adding a Sync Account 66
Backup 102
Celendar Event
Synchronization 93
Configuration 161
Configuring Settings 162
Create and Send 160
Creating a Signature 163
Creation 159
Deleting 161
Email Signature 67, 159
Opening 160
Replying 161
Signature 163
Index
M580.book Page 207 Monday, April 18, 2011 11:18 AM
D
Data Services 140–170
see also Web
FAQs 170
Launching the Web 141
Password 7
User Name 140
Index
207
M580.book Page 208 Monday, April 18, 2011 11:18 AM
Data Synchronization
Configuring 164
Date & Time 63
Automatic 63
Delete Threads 68
Device (illus.) 13
Device Settings 58–77
Airplane Mode 69
Display Settings 61–63
Location Settings 63
Messaging Settings 68
Sound Settings 58–61
TTY Use 70
Device Updates 101, 103
Dialing Options 42
Disconnecting a Bluetooth
Device 123
Display Screen 17, 62
Downloads 165
208
Index
E
Edit Sync Groups
Assigning a Picture to Device
91
Edit text menu 90
Email 151
Account Settings 158
Add Signature 67, 159
Composing 157
Icons/Shortcuts 152
Notifications 152
Opening 156
Refresh 156
Email Check Frequency 66,
158, 162
Emergency call 74
Emergency Numbers 43
Emoticons (Smileys) 17, 53
End-of-Call Options 46
Enhanced 911 (E911) 44
Entering Text 49–56
ABC Mode 51
Additional QWERTY Text
Options 53
Emoticons 56
Numbers 52, 55
Onscreen Keyboard 49
QWERTY Keyboard 52
Selecting Mode 49
Smileys 55, 56
Symbols 52, 55
Erasing Device Content 77
Event Reminders 96
Events
Erasing a Day’s 98
Erasing All Events 98
Exchange Account 159
Exchange Mail
Backup 102
F
Factory data reset 77
Favorites 48, 92
FCC Notice 194
M580.book Page 209 Monday, April 18, 2011 11:18 AM
G
Gmail 87
Accessing Email Messages
154
Account Settings 155
Assinging a Contacts Image
91
Backup 102
Create and Send 153
Creation 153
Deleting 155
Email Signature 154
Opening 153
Refresh 153
Replying 155
Signature 155
Viewing a New Email 154
H
History 78
Home Key 24
Home Screen
Adding Web Bookmarks
148
Customizing 34
Extended Screens 29
Overview 27
Homepage
Creating 148
Index
Google
Account Management
Settings 65
Account Signin 57
Account Syncronization 65
Adding a Sync Account 65
Creating an Account 56
Synchronizing an Account
64
Google Applications
Backup 102
Google Maps 176
Enabling the GPS 177
Launching 177
Searching 177
Google Search 26, 29
Google Talk 33
GPS Satellites
Usage 64
GPS Services 176
File Viewer
Accessing 98
Folders
Creating and Managing 37
Forgot My Unlock Pattern 73
I
ID Pack 5
Installation of First Pack 5
Installing Your First ID Pack 5
Overview 5
Sprint ID 5
Switching Packs 6
In-Call Options 45
Input Method 130
Changing 50
International Dialing 69
Haptic Feedback 60
Index
209
M580.book Page 210 Monday, April 18, 2011 11:18 AM
International Dialing Code
Changing 69
Internet
see Web
Internet Email
Adding Additional Accounts
156, 157
K
Key Functions 13
Keyboard Backlight 62
Keyboard Timeout 62
L
Language
Settings 63
Location Mode
Activating 176
Location Settings 63
Lock Mode
Calling 74
Locking Your Device 72
M
Making Calls 41
210
Index
Market
Downloads 165
Media volume 59
Memory
Clearing Application Cache
77
Internal phone storage 75,
76
Management 75
SD card 75
Uninstalling Third-Party
Applications 77
Menu i–vii
Navigation 27
Menu Key 24
Add 24
Notifications 24
Search 24
Settings 24
Wallpaper 24
Menu Navigation 39
Using Your Fingers 39
Message
Settings 134
Messages
Threads 68
Messaging
Deleting Old Text Messages
68
Email 151
Multimedia Messaging 131
Notification 68
Text Messaging 129
Voicemail 128
microSD 109, 110
Available space 76
Before You Begin 111
Total space 76
microSD Card 109–113
Adapter 111
Formatting 113
My Files 98
Re-insertion 110
Removal 109
M580.book Page 211 Monday, April 18, 2011 11:18 AM
My Favorites
Creating from a Category
183
Creating from a Recent Place
183
My Files 98
Navigation 178
Business 182
Finding the Lowest Gas Price
182
Google Maps 176
Preferences 183
North American Dialing 69
N
NASCAR
Exit 168
Fantasy 168
FanZone 168
Latest Tweets 168
Miss Sprint 168
News & Alerts 168
Race Recap 167
Settings and Help 168
Speed 168
Stats/Sched 168
Video 168
Navigating the Menus 27
Navigating the Web 142
O
Index
Write Protection 111
Missed Calls 43
MMS Text Messaging 131
Multimedia Messaging 131
Composing 131
Opening 133
Replying to 134
Settings 134
Music 172–174
Assigning a New Ringtone
174
Creating a Playlist 173
Gettig Started 171
Player 173
Playlist 173
Purchasing and
Downloading from
Amazon 172
Using a Song as a Ringtone
174
My Driver 168
OTA (Over the Air) 101
Outlook
Account Management
Settings 66
Synchronizing 65
Outlook Email 159
Owner’s Record 195
P
Pairing Bluetooth Devices 122
Passwords
Changing 75
Locking and Unlocking
Screen 74
Index
211
M580.book Page 212 Monday, April 18, 2011 11:18 AM
Phone Book
see Contacts
Phone Number
Displaying 41
Finding 48
Saving 47, 86
Phone vibrate 60
Picasa 117
Picture ID 117
Pictures
Sending Via Bluetooth 124
Taking Pictures 114
PIN
Changing 74
Locking and Unlocking
Screen 74
Plus Code Dialing 49, 69
PRL Updates
Downloading 103
Profile Updates
Downloading 103
212
Index
Q
Roaming 138–139
Roam Mode 139
Roaming Guard 139
Running Services
Managing 76
Stop Service 76
Quick Screen Access 30
Quick Search 25
Using Text 26
R
Recent Location
Adding to My Favorites 183
Sharing 183
Recently-Used Applications
Accessing 38
Resetting Your Device 77
Ringers
Assigning to Contacts 90
Setting Audible Touch Tones
59
Setting for Messages 59
Setting for Notifications 59
Setting for Voice Calls 58
Silence All 60
Types 58
Vibrate 60
Ringtone volume 59
S
Safety Information 188–195
Saving a Phone Number 47, 86
Screen Orientation 61
Screen Timeout 61, 192
Search Key 25
Searching
Using Text 26
Using Voice 26
Security 71–75
Menu 71
Select language 63
Set Wallpaper 63
Setting the Language
English 63
Español 63
M580.book Page 213 Monday, April 18, 2011 11:18 AM
Scores and Schedules 169
Settings/Help 170
Team Pages 169
Twitter 169
Sprint ID 5, 24
Sprint Mobile Hotspot 151
Passkey 151
Sprint Navigation 176–178
Creating Favorites 183
Product Tour 185
Sprint Service
Account Passwords 7
Activation 4
Operator Services 9
Sprint 411 9
Sprint TV 172
Getting Started 171
Status bar 27
Stop 76
Stop Service 76
Suggested Word Choices 51
Synchronizing Accounts 64
System Update 101
T
Taking Pictures 114
Talk 33
Text
Selecting on Web Page 144
Text Entry
see Entering Text 52
Text Message
Backup 102
Text Messaging 129
Settings 134
Text-to-Speech 107
Language 107
Settings 107
Third-Party Applications
Uninstalling 77
Three-Way Calling 137
TRS 71
TTY Use 70
Turning Your Device On and
Off 20
Index
Index
Settings 58–77
Shortcuts
Adding via Home screen 35
Creating 34
Deleting 36
Via Applications Tab 34
Signature 67, 155, 159, 163
Silence All 60
Silent mode 61
Smiley 130
Smileys 131
Smileys (Emoticons) 17, 53
SMS Text Messaging 129
Software Updates
Downloading 101
Firmware 101
Speed Dialing 48
Favorites 48
Sprint Football Live
Draft 169
Exit 170
News and Analysis 169
213
M580.book Page 214 Monday, April 18, 2011 11:18 AM
Use Wireless Networks
Activating 176
User Name 140
Updating 141
TV 172
U
Unlock
Creating a Password 74
Creating a PIN 74
Unlock Pattern 72
Changing the Pattern 73
Configuring Settings 73
Creating 72
Forgotten Your Pattern 73
Use visible pattern 73
Unlocking Your Device 72
Unpairing a Bluetooth Device
123
Update Firmware 101
Updating Firmware
OTA 101
Updating Your Device
Firmware 101
Updating Your PRL 103
Updating Your Profile 103
Use GPS satellites 177
214
Index
Retrieving 129
Setting Up 6, 128
Volume
Media 59
Ringer 59
V
Vibrate 60
Haptic Feedback 60
Videos
Recording 118
Settings 119
Visible Passwords 75
Disable 75
Voice Dialer 104
Activation 104
Calling a Number 106
Making a Call 105
Voice Dialing 105
Voice Input 50
Voice Search 14, 25, 26
Additional Functions 27
Voicemail
Notification 128
W
Wallpaper 117
Home screen 117
Wallpaper Gallery 62
Wallpapers 62
Warranty 196
Web 140–148
see also Data Services
Browser Menu 143–148
Email 151
Going to a Web page 142
Launching 141
Moving Around 142
Navigating 142
User Name 140
Web Bookmarks 148
M580.book Page 215 Monday, April 18, 2011 11:18 AM
Index
Wi-Fi
Connecting to a Network
149
Manually Scanning 150
Settings 149, 150
Status Indicators 150
Turning Off 149
Turning On 149
Wi-Fi Hotspot 151
Window Animation 61
Wireless Networks 64
Write Protection 111
Y
YouTube 175
Index
215
M580.book Page 216 Monday, April 18, 2011 11:18 AM