Azbox Premium HD+ User manual

AZBox Premium HD+
User Manual
High Definition
Digital Satellite Receiver
Personal Video Recorder
1
Danger
DANGER indicates an immediate hazardous situation which, if not avoided,
will result in death or serious injury.
 Do not attempt to modify this receiver in any way. To do so may result
in fire, injury, electronic shock or severe damage to you or your
receiver. Internal inspection, maintenance and repairs should only be
carried out by your dealer or OpenSAT.
 Please do not use this receiver in close proximity to flammable or
explosive gases, as this could increase the risk of explosion.
 Should any form of liquid or a foreign object enter the receiver, do not
use the receiver. Power off the receiver, and then disconnect the power
cord. You must contact your dealer or OpenSAT. Do not continue to use
the receiver as this may cause a fire or electric shock.
 Do not insert or drop metallic or inflammable foreign objects into the
receiver though ventilation holes or access points e.g. smart card slot
or CAM slot. This may cause a fire or electronic shock.
 Do not operate this receiver with wet hands. This could pose a risk of
electronic shock.
2
Warning
Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury
from tip-over.
(a) Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
(b) The mains plug, which is used as a disconnect device, shall remain
readily operable.
When you use USB devices such as USB hard-disk drive (HDD) and USB
memory stick, or internal hard-disk drive (HDD) with this receiver, you
should make sure that the HDD be formatted in FAT file system, not
NTFS. In case you use NTFS formatted HDD,
(a) PVR feature is not supported.
(b) The receiver may not boot-up properly.
(c) Even with FAT formatted USB HDD, please connect it to your
receiver only after the receiver completed booting.
(d) If you power on/off the receiver with the NTFS formatted USB
device connected to the receiver, STB may get damaged or
may not start properly.
3
Caution
(a) Always follow these instructions to avoid the risk of injury to
yourself or damage to your equipment.
(b) Unplug the receiver from the AC power outlet before cleaning. Use
only a damp cloth for cleaning the exterior of the receiver.
(c) Do not use accessories or attachments not recommended by the
receiver manufacturer, as they may cause hazards and will void the
warranty.
(d) Do not operate the receiver in high-humidity areas, or expose it to
water or moisture.
(e) Do not place the receiver on an unstable cart, stand, tripod, bracket,
or table. The receiver may fall, causing serious personal injury and
damage to the receiver.
(f) Do not block or cover slots and openings in the receiver. These are
provided for ventilation and protection from overheating. Never place
the receiver near or over a radiator or heat register. Do not place the
receiver in an enclosure such as a cabinet without proper ventilation.
(g) Do not stack the receiver on top of or below other electronic
devices.
4
(h) Operate the receiver using only the type of power source indicated
on the marking label. Unplug the receiver power cord by gripping the
power plug, not the cord.
(i) Route power supply cords so that they are not likely to be walked on
or pinched by items placed upon or against them. Pay particular
attention to cords at plugs, convenience receptacles, and the point
where they exit from the unit.
(j) Use an outlet that contains surge suppression or ground fault
protection. For added protection during a lightning storm, or when
the receiver is left unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the lines between the
receiver and the antenna. This will provide some protection against
damage caused by lightning or power line surges.
(k) Do not attempt to service the receiver yourself, as opening or
removing covers may expose you to dangerous voltage, and will void
the warranty. Refer all servicing to Authorized service personnel.
(l) Unplug the receiver from the wall outlet and refer servicing to
authorized service personnel whenever the following occurs:
- The power supply cord or plug is damaged;
- Liquid has been spilled, or objects have fallen into the receiver;
- The receiver has been exposed to rain or water;
- The receiver has been dropped or the chassis has been damaged;
- The receiver exhibits a distinct change in performance.
5
Safety Precautions
Please read carefully the following safety precautions.
① The mains power must be 90 to 250 volts. Check it before
connecting the digital receiver to the mains socket. For the power
consumption of the digital receiver, see 6.1.
② The mains socket should be near the equipment. Do not run an
extension lead to the unit.
③ Do not expose the digital receiver to any moisture. The digital
receiver is designed for use indoors only. Use dry cloth when
cleaning the digital receiver.
④ Place the digital receiver on a firm and level surface.
⑤ Do not place the digital receiver close to heat emitting units or in
direct sunlight, as this will impair cooling. Do not lay any objects
such as magazines on the digital receiver. When placed in a
cabinet, make sure there is a minimum space of 10 centimeters
around it. For the physical specification of the digital receiver, see
6.1.
⑥ Protect the power cord from being walked on or pinched. If the
cord is damaged, do not use the digital receiver and get the cord
replaced.
⑦ Never open the digital receiver casing under any circumstances,
or the warranty will be void.
⑧ Refer all servicing to a qualified service technician.
6
Additional Remarks
This device may not be used for setting up outdoor radio links in France and
in some areas the RF output power may be limited to 10 mW EIRP in the
frequency range of 2454 – 2483.5 MHz. For detailed information the end-user
should contact the national spectrum authority in France.
7
Contents
Table of Contents
1.
Introduction ......................................................................................................................................... 12
1.
1 Features ........................................................................................................................................................12
1.2
Package Contents .........................................................................................................................................14
1.3.
The front panel.............................................................................................................................................15
1.4.
The Rear Panel .............................................................................................................................................17
1.5. The remote control ........................................................................................................................................19
1.5.1. STB Code output Format (Varied NEC protocol) .......................................................................22
TV Universal configuration 1 (4-digit number input) ...........................................................................................22
1.5.1.1
TV Universal configuration 2 (Auto search) ...........................................................................22
1.5.1.2
TV configuration number search (ID Recall) .........................................................................23
1.5.1.3
TV List .........................................................................................................................................23
1.6 CI (Common Interface) .......................................................................................................................................24
1.6.1
To watch a pay service .........................................................................................................................24
2
Installations ............................................................................................................................................. 26
2.1.
Connections to antenna ...............................................................................................................................26
2.2. Connections to TV ........................................................................................................................................27
2.2.1.
HDMI connector ...................................................................................................................................28
2.2.2.
SCART connector ..................................................................................................................................29
2.2.3.
Component video connector ...............................................................................................................30
2.2.4.
Composite video connector .................................................................................................................31
2.2.5.
Audio connection .................................................................................................................................32
2.3.
Installing batteries .......................................................................................................................................33
2.4. Powering on for the first time ......................................................................................................................34
2.4.1.
Powering on and checking picture .......................................................................................................35
2.5. Firmware Update .........................................................................................................................................36
2.5.1.
Checking the firmware information .....................................................................................................36
2.5.1.1.
Internet .......................................................................................................................................37
2.5.1.2.
USB Storage ...............................................................................................................................38
3.
Settings ................................................................................................................................................. 40
3.1.
System Information ......................................................................................................................................40
3.2. Language/Time settings ..............................................................................................................................41
3.2.1.
Menu Language ...................................................................................................................................41
3.2.2.
Audio Language / Sub audio language .................................................................................................42
3.2.3.
Subtitle language .................................................................................................................................42
3.3.
Local time setting .........................................................................................................................................43
3.4. Timer ............................................................................................................................................................46
3.4.1.
Timer Number ......................................................................................................................................46
3.4.2.
Timer State ...........................................................................................................................................47
8
3.4.3.
3.4.4.
3.4.5.
Timer Cycle ..........................................................................................................................................47
Timer Service .......................................................................................................................................47
Time .....................................................................................................................................................47
3.5. Internet ........................................................................................................................................................48
3.5.1.
Network ...............................................................................................................................................48
3.5.2.
IP Setting ..............................................................................................................................................48
3.5.3.
Speed Check .........................................................................................................................................49
3.6. Storage .........................................................................................................................................................50
3.6.1.
Device ..................................................................................................................................................50
3.6.2.
Partition ...............................................................................................................................................50
3.6.3.
Partition Format ...................................................................................................................................51
3.7. Video and audio settings .............................................................................................................................52
3.7.1.
Video Format .......................................................................................................................................53
3.7.2.
Video resolution...................................................................................................................................53
3.7.3.
Screen Format ......................................................................................................................................54
3.7.4.
Display Format .....................................................................................................................................54
3.7.5.
Video Output .......................................................................................................................................54
3.7.6.
Default Audio Format...........................................................................................................................55
3.7.7.
Audio Output .......................................................................................................................................55
3.7.8.
Dolby Output .......................................................................................................................................55
3.7.9.
RF Channel Number .............................................................................................................................56
3.7.10. RF Audio Type ......................................................................................................................................56
3.8. TV Channel ...................................................................................................................................................57
3.8.1.
Antenna Setup .....................................................................................................................................57
3.8.1.1.
Satellite Name ............................................................................................................................58
3.8.1.2.
LNB Frequency ...........................................................................................................................59
3.8.1.3.
DiSEqC.........................................................................................................................................60
3.8.1.4.
22KHZ Tone ................................................................................................................................60
3.8.1.5.
0/12V Switch ..............................................................................................................................60
3.8.1.6.
LNB Power ..................................................................................................................................60
3.8.1.7.
TP Frequency .............................................................................................................................61
3.8.1.8.
Positioner Setup .........................................................................................................................61
3.8.1.9.
Network Search..........................................................................................................................64
3.8.2.
Satellite Scan ........................................................................................................................................65
3.8.3.
TP Scan .................................................................................................................................................66
3.8.4.
Advanced Scan .....................................................................................................................................67
3.8.4.1.
PID Edit .......................................................................................................................................67
3.8.5.
SAT/TP Edit ...........................................................................................................................................68
3.8.5.1.
Add satellite (TP) .......................................................................................................................68
3.8.5.2.
Delete Satellite (TP) ..................................................................................................................68
3.9. Parental control ...........................................................................................................................................69
3.9.1.
Change password .................................................................................................................................69
3.9.2.
Menu lock feature ................................................................................................................................70
3.9.3.
Age rating control / Age limit ...............................................................................................................70
3.10.
Data Reset................................................................................................................................................72
3.10.1. Factory setting .....................................................................................................................................72
3.10.2. Delete all channels ...............................................................................................................................73
3.10.3. Delete satellite channels ......................................................................................................................73
9
3.11.
4.
GOGO-list .................................................................................................................................................74
Main Menu ............................................................................................................................................ 75
4.1. TV .................................................................................................................................................................76
4.1.1.
Watching television ..............................................................................................................................76
4.1.1.1.
Changing Channels ....................................................................................................................76
4.1.1.2.
Adjusting the Volume ................................................................................................................76
4.1.2.
Channel Selection ................................................................................................................................77
4.1.2.1.
How to sort the channels .........................................................................................................78
4.1.2.2.
Favorite channel lists .................................................................................................................79
4.1.2.3.
Channel Edit ...............................................................................................................................80
4.1.2.4.
Program Information .................................................................................................................81
4.1.2.5.
Selecting subtitle lists................................................................................................................82
4.1.2.6.
Viewing Teletext .........................................................................................................................83
4.1.2.7.
Selecting audio lists ...................................................................................................................83
4.1.3.
EPG (Electronic Program Guide) ..........................................................................................................84
4.1.3.1.
EPG (Electronic Program Guide) ..............................................................................................85
4.1.3.2.
Single EPG ..................................................................................................................................86
4.1.3.3.
Search EPG .................................................................................................................................86
4.1.4.
PVR (Personal Video Recorder) ............................................................................................................86
4.1.4.1.
PVR ..............................................................................................................................................87
4.1.4.2.
Record Live TV ...........................................................................................................................89
4.1.4.3.
Reserve Record/Play .................................................................................................................89
4.1.4.4.
Reserve recordings using the EPG ..........................................................................................91
4.1.4.5.
Recording a pay service program ............................................................................................91
4.1.4.6.
Recorded Program .....................................................................................................................92
4.1.4.7.
Reserved Program .....................................................................................................................92
4.1.4.8.
Time-Shift ...................................................................................................................................93
4.2. YouTube ........................................................................................................................................................95
4.2.1.
How to search in the YouTube .............................................................................................................95
4.2.2.
Load Video Lists ...................................................................................................................................97
4.3. File Play & Management..............................................................................................................................98
4.3.1.
Movie / Music / Photo .........................................................................................................................98
4.3.1.1.
Movie ...........................................................................................................................................99
4.3.1.2.
Music .........................................................................................................................................100
4.3.1.3.
Photo .........................................................................................................................................101
4.3.2.
File Management ...............................................................................................................................102
4.3.2.1.
Move files to another folder ...................................................................................................103
4.4. RSS News ....................................................................................................................................................104
4.4.1.
Add new category ..............................................................................................................................104
4.4.2.
Register new channel .........................................................................................................................105
4.5. Browser ......................................................................................................................................................106
4.5.1.
Favorite List ........................................................................................................................................106
5.
Network............................................................................................................................................... 108
5.1.
Connect the digital receiver to the computer.............................................................................................108
5.2.
Connect the computer to the digital receiver. ............................................................................................109
10
11 Introduction
5.2.1.
5.2.2.
6.
Windows XP .....................................................................................................................................109
Windows Vista .................................................................................................................................109
Product specifications / Warranty ............................................................................................... 111
6.1. Product specifications ................................................................................................................................111
6.1.1.
Power specifications ..........................................................................................................................111
6.1.1.1.
AZBox Premium HD+ ..............................................................................................................111
6.1.2.
Physical specifications ........................................................................................................................111
6.1.2.1.
AZBox Premium HD+ ..............................................................................................................111
6.2. Warranty ....................................................................................................................................................112
6.2.1.
Warranty Terms and Conditions ........................................................................................................112
6.2.2.
Provisions of Warranty .......................................................................................................................112
6.2.3.
Notes regarding warranty maintenance ............................................................................................114
6.2.4.
Disclaimer of Warranty ......................................................................................................................115
7.
Appendix A. 802.11b/g Specification ......................................................................................... 116
8.
Appendix B. TV Brand List .............................................................................................................. 117
9.
Appendix C. R&TTE Declaration ................................................................................................... 152
11
1 Introduction
1. Introduction
The AZBox Premium HD+ digital receiver is fully compliant with the
international Digital Video Broadcasting (DVB) standard, and thus is
able to receive digital broadcasts of that standard.
For its operation you need an antenna, which must be installed
appropriately.
NOTE
In general we equate a channel with a frequency. However, unlike
analogue broadcasts, digital broadcasts are not all assigned to their own
frequencies; instead, multiple television broadcasts are transmitted
through a single frequency. The frequency in digital broadcasting is
usually called transponder. To reduce confusion in this manual, the word
service is preferably used than channel as a term to indicate one
television or radio broadcast.
1. 1 Features
The AZBox Premium HD+ digital receiver has the following
features:
① Supports DiSEqC 1.0, DiSEqC 1.2 and USALS.
② Can store up to 15,000 television and radio services.
③ You can edit the services list.
④ You can create favorite lists of your favorite services.
⑤ You can view information about the current television or radio
program.
⑥ Has an electronic program guide that provides an overview of
12
scheduled programs.
⑦ You can record one service while you are currently watching
another.
⑧ The large storage capacity of the hard disk drive allows you to
record up to about 60 hours of television —in case of 250
gigabytes— in excellent picture and sound quality.
⑨ Time shift is a special technical feature available on the AZBox
Premium HD+ (PVR). You can pause the program you are
watching and resume it again at a later time. Then you can
quickly go to any part of the current program by fast forward or
backward search.
13
1 Introduction
1.2 Package Contents
Before going any further, check that you have received the following
items with your digital receiver.
•
•
•
•
•
•
•
•
AZBox Premium HD+
Remote control unit
Two batteries for the remote control (AAA 1.5V)
One power adaptor
One power cable
One SATA cable
User Guide CD
Four Screw bolts for 2.5” & 3.5” HDD
NOTE: Accessories may vary according to your local area.
14
15
1 Introduction
1.3. The front panel
The front panel of the AZBox Premium HD+ has buttons to perform
basic functions such as changing channels, adjusting volume, and
powering on and off, as well as specific LEDs and a display to indicate
its status. The following indicates what they mean.
1, 2 and 3
4
5
6
7
8
9
11
10
10
9
① One SMART CARD Slot: Support electronic commerce using a
smart card.
② Two CI CARD Slots: Connect to support devices.
③ USB Slot: Connect to support devices. (Premium HD+ model
has two USB slots. One is on the front, the other is on the rear
panel)
④ Main Display: Display the current channel name. While the
receiver is in stand-by mode, it will show the current time.
LED Indicator
Power LED: Blue LED while the digital receiver is on.
REC LED: Red LED when you are recording a program.
HD Channel LED: Green LED when receiving a HD (High
Definition) program.
15
1 Introduction
⑤ Power button: Switch the digital receiver between stand-by
mode and operation mode. To reboot the receiver, press this
button for 3 seconds.
⑥ MENU button: Enter the detail menu.
⑦ EXIT button: Exit menus, EPG (Electronic Program Guide), and
program information.
⑧ Home button: Enter the main menu.
⑨ VOLUME +/- buttons: Increase or decrease the volume.
⑩ CHANNEL ∧/∨ buttons: Switch to previous or next service.
They are also used to navigate around menu screens.
⑪ OK button: Determine your selection or to display channel
selection.
16
1 Introduction
Introduction
1.4. The Rear Panel
The AZBox Premium HD+ has a wide range of connections on the back.
Check what connections your television set has in comparison with the
digital receiver. The following indicates what they mean.
1
2
3
4
5
7
10
6
8
9 11
12
13
14
① POWER SWITCH: Turn the digital receiver On and OFF.
② AC POWER INPUT: Connect AC power cord to deliver power to the
digital receiver.
③ FAN
④ HDMI: Audio and video output socket for the high definition
television set.
⑤ LAN: Local area network port.
⑥ USB Slot: Connect to support devices.
⑦ 0/12V: 0V or 12V output
⑧ S/PDIF: Dolby digital output socket for the audio system.
⑨ Y/Cb/Cr: Component video output socket for the television set.
17
(green/blue/red)
⑩ VIDEO: Composite video output socket for the television set.
(yellow)
⑪ AUDIO L/R: Stereo audio output socket for the television set or the
audio system. (white/red)
⑫ SCART TV: Audio and video output socket for the television set.
⑬ TUNER 1: with input and output socket.
⑭ TUNER 2: with input and output socket.
Table 1.4: Connectors specifications
HDMI
High definition video output
Left & right audio output
Dolby digital audio output
VIDEO
Composite video (CVBS) output
AUDIO
Left & right audio output
YCbCr
Component video (YUV) output
S/PDIF
Dolby digital audio output
USB
2.0 Host (5V, 500 mA)
18
19
1 Introduction
1.5. The remote control
19
20
1 Introduction
Numbers from 1 to 5 are for TV control buttons.
1)
TV/AUX (
): Switch to antenna/cable bypass input signal.
2)
TV VOL +/- (
3)
TV CH ∧/∨ (
4)
TV Power (
): Turn TV on and off.
5)
TV MUTE(
): Mute the TV sound. Press again to switch it
): Increase or decrease TV volume.
): Change the channels up and down.
back.
6)
STB Power (
): Put the STB into standby or operation
mode. To reboot the receiver, press this button for 3 seconds.
7)
WWW (
): Pop up input window to accept URL.
8)
E-mail (
9)
YouTube (
): Link to web-based e-mail.
): Jump to the YouTube service. See § 4.2
for more details.
10)
Home (
): Display Main Menu.
11)
VOL +/- (
): Increase or decrease volume.
12)
CH ∧ /∨ (
): Change the channels up and down.
13)
INFO (
): Show a description of the selected program.
Press twice to display more information about a program.
14)
PREV / REW / F.FWD / NEXT / STOP / PLAY&PAUSE /
REC (
): Support basic operation
for On-Screen Display
15)
MUTE (
): Mute the sound. Press again to switch it back.
20
1 Introduction
16)
MENU (
): Display the Detail Menu.
17)
CHECK (
): Check the selected option.
18)
GUIDE (
): Display the EPG (Eletronic Program Guide).
19)
EXIT (
): Exit menus, EPG (Eletronic Program Guide) and
program information.
20)
Navigation buttons (
): Move the cursor
around menu screens.
21)
OK (
): Determine your selection or display channel
selection.
22)
TV/RADIO (
): Switch between TV services and radio
services.
23)
SEARCH (
): Search internet address (Only use in YouTube
and Browser Menu)
24)
RESOLUTION (
): Change aspect ratio. See § 3.5.1 for
more details.
25)
SUB-T (
): Select a subtitle track.
26)
TEXT (
): View teletext on TV screen (if available)
27)
LANG (
): Select a language track.
28)
i-KEY (
):For Premirer Multifeed Channels
29)
USB (
): Display the list of files that are stored on the USB
memory stick.
30)
UHF (
): Display and select the UHF channel for the RF
modulator.
31)
AUX (
): Switch to antenna/cable bypass input signal.
21
1 Introduction
32)
NUMERIC BUTTONS (0~9): Input channel numbers,
passwords, on-screen keyboard and to set time.
33)
DEL/BACK (
): Delete or move your cursor one step back.
34)
CAPS/NUM (
): Switch the number buttons to lower,
upper case letters or back to numbers.
1.5.1.
STB Code output Format (Varied NEC
protocol)
①
uPD6121 base, wordtime = 109.5msec output.
②
All the keys have the same Break code(0xFF, 0x00)
TV Universal
number input)
configuration
1
(4-digit
① Press TV/AUX(
) + OK( ) buttons for 3 seconds, then, the TV
Power( ) button will turns on.
② With the TV Power( ) turns on, press 4-digit numbers according
to TV brand list. See 7. Appendix. If there are multiple numbers for
the same brand, repeat the process 2 until TV turns off.
③ After TV turned off, press the OK( ) button.
④ The TV Power( ) button will blinks three times, and configuration
is done.
1.5.1.1
TV Universal
(Auto search)
configuration
2
22
1
Introduction
① Press TV/AUX(
) + OK( ) buttons for 3 seconds, then the TV
Power( ) button will turns on.
② With the TV Power( ) button turns on, press the
or
button until TV turns off.
③ After TV turned off, press the OK( ) button.
④ The TV Power( ) button will blinks three times, and configuration
is done.
1.5.1.2
TV configuration number search
(ID Recall)
① Press TV/AUX(
) + OK( ) buttons for 3 seconds, Then the
TV Power( ) button will turns on.
② With the TV Power( ) button turned-on, if the Info( )
button is pressed, saved numbers in RCU can be verified with
blinking the TV Power( ) button.
③ The
button will quickly blink five times, and configuration is
done.
1.5.1.3
TV List
Please refer to the TV List and TV codes in 7. Appendix B. TV Brand
List.
23
1 Introduction
1.6 CI (Common Interface)
Some broadcasts are scrambled so that only paid subscribers can enjoy
them. Scrambled services can only be viewed with a Conditional Access
Module (CAM) and a subscription card belonging with the scrambling
system. Common Interface (CI) is the slot on a digital receiver into
which a conditional access module may be inserted. The front of the
digital receiver has two common interfaces.
1.6.1 To watch a pay service
To watch a pay service, you should take the following steps:
① 1. Purchase a conditional access module and a
subscription card for the pay service you want to watch.
2. Insert the subscription card into the conditional access module.
3. Insert the conditional access module into a common interface on the
front of the digital receiver.
24
1 Introduction
To view the information about the module and subscription card which
is inserted into the digital receiver, press the Menu(
) button. You
should see a screen like picture above.
25
2 Installations
2
Installations
There are several ways to set up the digital receiver. Set up the digital
receiver suitably to your television and other appliances. If you have
any problem with your setup or need help, contact your dealer.
2.1.
Connections to antenna
Whatever sort of connection you have between the digital receiver and
the television, you need to connect the digital receiver to your television
antenna so that it can receive digital television services.
Connect the antenna cable to the LNB IN connector on the back panel
of the digital receiver.
26
2 Installations
2.2.
Connections to TV
Between all the following connectors of the digital receiver, we
recommend you to use the first connector to get best picture quality. If
your television does not have the matching connector, then use the next
connector in the following order for better picture quality.
1. HDMI connector (HDMI)
2. SCART connector (TV)
3. Component connector (YCbCr)
4. Composite connector (VIDEO)
5. RF Modulator
You should configure audio and video settings after connecting up the
digital receiver. See § 3.6 for a detailed description.
27
2 Installations
2.2.1.
HDMI connector
If you have a high definition television set, you should use a HDMI cable
for best results. Plug one end of the cable into the HDMI socket on the
digital receiver, and plug the other end into the matching socket on your
television. In this case, you do not have to make audio connection
because the HDMI connector can output stereo audio or Dolby digital
audio.
NOTE
HDMI connector does not support 480i resolution.
28
2 Installations
2.2.2.
SCART connector
For best results with a standard television set, you should use a SCART
cable. Plug one end of the cable into the TV socket on the digital
receiver, and plug the other end into a free SCART socket on your
television. Some televisions have inputs via S-Video or Component
connectors rather than SCART. If you have such a television, use an
appropriate conversion cable to link the TV socket on the digital receiver
to the matching socket on your television. If you connect with a
standard SCART cable, you do not have to make audio connection
because the SCART connector can output stereo audio. But if you use a
conversion cable, such as SCART-to-Component, you have to make
audio connection.
NOTE
You cannot view high definition video with the SCART connector.
29
2 Installations
2.2.3.
Component video connector
You need to obtain a component video cable (RCA cable) to use the
component video connector. Plug one ends of the cable into the
Y(green), Cb(blue) and Cr(red) sockets on the digital receiver, and plug
the other ends into the matching sockets on your television.
30
2 Installations
2.2.4.
Composite video connector
You need to obtain a composite video cable(RCA cable) to use the
composite video connector. Plug one end of the cable into the
VIDEO(yellow) socket on the digital receiver, and plug the other end
into the matching socket on your television.
NOTE
You cannot view high definition video with the composite video
connector.
31
2 Installations
2.2.5.
Audio connection
You need to obtain an audio cable (RCA cable) to connect the audio
connectors. Plug one end of the cable into the AUDIO L (white) and
AUDIO R (red) sockets on the digital receiver, and plug the other end
into the matching sockets on your television or audio system.
To enjoy Dolby digital audio, your television or audio system must be
able to decode Dolby digital audio, and you need to obtain a S/PDIF
32
2 Installations
cable. Plug one end of the cable into the S/PDIF socket on the digital
receiver, and plug the other end into the matching socket on your audio
system.
2.3.
Installing batteries
To install batteries in the remote control, perform the following steps:
1. Take off the battery cover from back of the remote control.
2. Install two AAA batteries, follow the instruction described in the
container and make sure the polarity (+ / -) direction is correct.
3. Put on the battery cover back.
NOTE
- Do not mix battery types. (Alkaline and Manganese)
- Do not short-circuit, heat, burn or disassemble batteries.
- Used batteries must not be disposed together with your household
waste. Please, inquire about the local regulations regarding disposal of
used batteries.
33
2 Installations
2.4.
Powering on for the first time
[AZBox Premium HD+]
Now that you have your digital receiver connected, you should plug it
into a mains socket and turn on the Power Switch at the backside.
The front panel indicator will be lit blue.
34
NOTE
- Your receiver, as any electronic equipment, is power consuming. In
order to reduce power consumption, please switch your receiver to
standby whenever you are not using it.
- For saving energy compared to the stand by mode, if you are not
using your receiver for a longer period of time, we recommend to
switch off the receiver by unplugging it from the mains.
2.4.1.
Powering on and checking picture
After a few seconds you may see a picture displaying a menu. If you do
not see a picture, try pressing the Resolution (
) button on the
remote control. If after several tries you still get no picture, check that
the television is set to the correct input.
35
2 Installations
2.5.
Firmware Update
The digital receiver has a stable and convenient firmware to use.
However, once in a while a new firmware may be released to improve
the digital receiver.
2.5.1.
Checking the firmware information
You have to check up the firmware information of your digital receiver
before downloading a new firmware. Select the Settings > System
Information menu. Check the Firmware Version and Last upgrade option,
and you can upgrade your firmware through the Internet, USB or
Ethernet.
36
2 Installations
NOTE
The version of firmware is always the latest version when you purchase
the digital receiver.
2.5.1.1.
Internet
You can update the firmware through the Internet. Make sure that the
digital receiver is connected to the internet before running the firmware
upgrade. Press the OK (
) button, and the Update List will be shown.
If your firmware is the latest version, you don’t have to upgrade your
firmware.
37
2 Installations
2.5.1.2.
USB Storage
If you have a USB memory stick, you can update the firmware from it
by performing the following steps:
① Download a new firmware from the AZBox web site.
② Copy the firmware file to your USB memory stick.
③ Insert the USB memory stick into the USB port of the digital
receiver.
④ Select the Settings > System Information > Firmware
Upgrade menu, then the files in the USB memory are listed.
⑤ Place the highlight bar on the right firmware version and
press the OK( ) button.
⑥ The receiver will be rebooted automatically to upgrade your
firmware.
⑦ Please wait for the installation.
⑧ After installation, the receiver will be rebooted again. Now
you can use the receiver with upgraded version.
NOTE:
The maximum data transfer rate of each USB port (USB 2.0) is 40Mbps
(5MB/Sec) and maximum current is 500mA. Therefore, if you use
external USB storage device exceeding this current peak, the external
USB device may not work properly and you may have to use external
power for the USB device.
38
2 Installations
NOTE
Your USB memory must be formatted in the FAT file system.
Otherwise, the digital receiver cannot recognize your USB memory. In
addition, the digital receiver can only recognize files and directories
which are named with only alphabetic, numeric and underscore
letters. If there is a file or folder named with other letters, the digital
receiver cannot recognize not only it but also its subsequent files and
folders.
39
3 Settings
3. Settings
If it is first time using the receiver, you will need to set the correct
parameters for the system configuration. The settings menu is to set all
the parameters for the equipment you are using.
3.1.
System Information
You can check the current information of the digital receiver from this
menu; Firmware Version, Last upgrade, Resolution, MAC address,
(AZBox Premium HD+
also shows MAC wireless address if you have),
IP and Internet status.
40
3 Settings
You can also upgrade your firmware version or download channels
through the Internet, USB or Ethernet. To upgrade your firmware, see §
2.5.
3.2.
Language/Time settings
You can select the language in which the menu would be displayed. In
addition to that, you can select the language of audio track and of
subtitle track. Select the Setting > Language/Time menu.
3.2.1.
Menu Language
The digital receiver supports many Menu Languages: English,
41
3 Settings
Portuguese, Dutch, Korean, and so forth. Set the Menu Language option
to your desired language. Once you select a language, the menu will be
immediately displayed in the selected language. The default setting is
English.
3.2.2.
Audio Language / Sub audio language
The digital receiver supports many Audio / Sub audio languages:
English, Portuguese, Dutch, Korean, Turkish, German, French, Spanish,
Greek, Slovenian, Swedish, Finnish, Italian, Danish, Russian, Polish,
Czech, Hungarian, Bosnian, Croatian, Serbian, Macedonian, Rumania,
Ukrainian, Bulgarian, Ukraine, Latvian, Norwegian, Lithuanian, Estonian,
Slovak, and so forth.
Set the Audio Language and the Sub Audio Language option to your
desired languages. When you watch a program, if the program has an
audio track of the language that is designated for the Audio Language,
it will be output. If the language is not available but the sub language is
available, the audio of the sub language will be output.
3.2.3.
Subtitle language
Set the Subtitle Language option to your desired language. When you
watch a program, if the program has a subtitle track of the language
that is designated for the Subtitle Language, it will be displayed. If there
is not any available language, no subtitle will be displayed.
42
3 Settings
3.3.
Local time setting
You should set your local time for timer events. If you do not set the
local time correctly, the program time table provided by the program
guide may be distrustful. For the program guide, see § 4.1.3.1.
Select the Setting > Language/Time menu. You should see a screen like
the figure above.
You can set the clock: Manual, Air, Internet, or use the time signal,
Greenwich Mean Time (GMT), carried as part of the digital television
broadcast. The default setting is Internet.
To use Greenwich Mean Time, take the following steps:
43
3 Settings
① Set the Time Offset option to the time difference between
your time zone and GMT referring to Table 3.3.
② Make sure that your local time is correctly displayed on the
Local Time option.
To set the local time manually, set the Mode option to Manual and enter
your local time to the Time option with the Number buttons. The time
format is day/month/year 24-hour: minute.
If daylight saving time is observed in your state at the moment, set the
Daylight Saving Time option to Yes. The default setting is NO.
NOTE
Daylight saving time adds one hour to the time when the option is set
to Yes. When setting the time offset from Greenwich Mean Time, make
sure that time offset does not include daylight saving time.
Table 3.3: Time offset table
Time / offset / City
GMT - 12:00 Eniwetok, Kwajalein
GMT - 11:00 Midway Island, Samoa
GMT - 10:00 Hawaii
GMT - 09:00 Alaska
GMT - 08:00 Pacific Time US, Canada
GMT - 07:00 Mountain Time US, Canada
GMT - 06:00 Central Time US, Canada, Mexico City
GMT - 05:00 Eastern Time US, Canada, Bogota, Lima
GMT - 04:00 Atlantic Time Canada, La Paz
GMT - 03:30 Newfoundland
GMT - 03:00 Brazil, Georgetown, Buenos Aries
GMT - 02:00 Mid-Atlantic
GMT - 01:00 Azores, Cape Verde Islands
44
GMT
GMT
GMT
GMT
GMT
GMT
GMT
GMT
GMT
GMT
GMT
GMT
GMT
GMT
GMT
GMT
GMT
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
London, Lisbon, Casablanca
1:00 Paris, Brussels, Copenhagen, Madrid
2:00 South Africa, Kaliningrad
3:00 Baghdad, Riyadh, Moscow, St. Petersburg
3:30 Tehran
4:00 Abu Dhabi, Muscat, Baku, Tbilisi
4:30 Kabul
5:00 Ekaterinburg, Islamabad, Karachi, Tashkent
5:30 Bombay, Calcutta, Madras, New Delhi
6:00 Almaty, Dhaka, Colombo
7:00 Bangkok, Hanoi, Jakarta
8:00 Beijing, Perth, Singapore, Hong Kong
9:00 Tokyo, Seoul, Osaka, Sapporo, Yakutsk
9:30 Adelaide, Darwin
10:00 Eastern Australia, Guam, Vladivostok
11:00 Magadan, Solomon Islands, New Caledonia
12:00 Fiji, Auckland, Wellington, Kamchatka
45
3 Settings
3.4.
Timer
With timers, you can turn your digital receiver on or off whenever you
wish. Once you have set the timer, the receiver will operate
automatically. Timer Menu allows you to select the timer number, state,
cycle, service, and the operation time.
3.4.1.
Timer Number
The Maximum number of timers is 8. If all of the timers have been used
you will have to erase an existing timer before a new timer can be set.
46
3 Settings
3.4.2.
Timer State
You can choose the use of the selected timer. Each timer can be turned
on or off.
3.4.3.
Timer Cycle
Each timer can be programmed to occur at various time intervals. There
are four timer modes:
One Time means literally ‘one time’
Every Day means literally ‘every day’
Weekdays means ‘Monday to Friday’
Weekend means ‘every Saturday and Sunday’
3.4.4.
Timer Service
You can choose the operation of the selected timer. Each timer can be
selected sleep or wake up.
3.4.5.
Time
Enter the time for the receiver to automatically sleep or wake up. Press
the number buttons to set time. A timer must be at least 5 minutes long
to activate. The time format is day/month/year 24-hour: minute.
47
3 Settings
3.5.
Internet
3.5.1.
Network
: Wi-Fi, Wired network. The default setting is Wired network.
To use WIFI, you need to set Wi-Fi and press the OK (
) button. For
802.11b/g specification, see Appendix A.
3.5.2.
IP Setting
: Dynamic IP (DHCP), Static IP. The default setting is DHCP.
DHCP: IP-subnet mask and Gateway are not used because the DHCP
48
3 Settings
server assigns these parameters.
To apply DHCP,
1. In IP setting option, choose DHCP IP and press the OK (
2. Select the setup below to apply the configuration.
) button.
Static IP: The system’s IP-address, IP-subnet mask and Gateway must
be specified in the IP-address.
To apply Static IP,
1. In IP setting option, choose Static IP and press the OK( ) button..
2. Input information IP address, subnet, gateway, DNS1 and DNS2
3. Select the setup below to apply the configuration.
3.5.3.
Speed Check
You can check the speed of your current internet connection here.
49
3 Settings
3.6.
Storage
3.6.1.
Device
Device option shows the list of the devices (HDD or USB) which
connected to your digital receiver. P(number) means the number of the
device’s partition. To delete partition press the Delete Partition (
)
button.
3.6.2.
Partition
Partition option shows the status of selected partition.
50
3.6.3.
Partition Format
To use the device with the digital receiver, you need to format it before
using it. Delete all partitions of the device you want to use, and select
Format with the OK (
) button. You cannot divide partition in this
menu.
51
3 Settings
3.7.
Video and audio settings
You have to configure the video and audio settings appropriately for
your television set and other appliances. Select the Setting >
Audio/Video menu. You should see a screen like the left figure.
The picture format for an HDTV is a combination of screen format and
video resolution and is different for normal-screen and wide-screen
HDTVs.
52
3 Settings
3.7.1.
Video Format
You can choose the video format: PAL or NTSC
PAL for Europe and North America and NTSC models for North America.
The default setting is PAL.
3.7.2.
Video resolution
Your receiver can transmit pictures to your TV in a range of resolutions.
Generally, higher screen resolutions give better quality pictures.
However, if your television set does not support high definition, you
cannot enjoy high definition quality picture. The digital receiver supports
various video resolutions from 480 to 1080. The default setting is
576i50.
You must make the appropriate TV Display Capability settings on your
receiver, so that it is compatible with your TV. In order to display the
best picture every time, you should select every resolution that your TV
is capable of displaying. This should ensure that programs are displayed
with the minimum distortion.
While watching television you can change the resolution with the
Resolution (
) button. Whenever you press it, the video resolution
is changed in turn.
53
3 Settings
3.7.3.
Screen Format
The TV that you have connected to your set-top has an aspect ratio
(width-to-height ratio) of 4:3 (basic/standard) or 16:9 (widescreen).
You must set the appropriate TV Aspect Ratio on your set-top, so that it
is compatible with the TV.
Two settings are available: 4:3 and 16:9. You should set the TV Aspect
Ratio to 4:3 or 16:9 as appropriate. If you have a wide-screen television,
set the Screen Format option to 16:9. Otherwise, if you have a normalscreen television, set the Screen Format option to 4:3. The default
setting is 4:3.
3.7.4.
Display Format
If you set it to LetterBox option, wide-screen pictures then will be
reduced to fit to the width of the normal screen. Otherwise, set it to
FullScreen, then wide-screen pictures will be cut out on the left and
right sides equally to fit to the width of the normal screen. The default
setting is FullScreen.
3.7.5.
Video Output
You can choose the video output: CVBS (composite) or RGB
(component). The default setting is CVBS.
54
3 Settings
3.7.6.
Default Audio Format
You can choose the default audio format: AC3 or off. The default setting
is Off.
3.7.7.
Audio Output
You can choose the audio output: Stereo, Left (Mono) or Right (Mono).
Basically, there are two audio sources as you can find two audio sockets
on the back panel of the digital receiver. You can enjoy only one source
or both of them in either Stereo, Left (Mono), and Right (Mono). Set the
Sound Output option as you desire. The default setting is Stereo.
3.7.8.
Dolby Output
The digital receiver can output two types of digital audio signals via the
S/PDIF connector. One is an encoded signal, and the other is a decoded
signal. If your digital audio system does not have a Dolby Digital
decoder, you have to set the Dolby Output option to Uncompressed.
Otherwise, set it to Compressed. The default setting is Uncompressed.
NOTE
If the service you are currently watching does not provide Dolby digital,
you cannot watch the program with Dolby sound even though you set
the Dolby Output option to Compressed.
55
3.7.9.
RF Channel Number
You can choose the RF channel number: 21 to 69.
Your TV must be set to this channel in order to view the output of your
receiver. If this channel is currently being used as a broadcast channel
or if you are getting interference on this channel, you may change the
channel to an unused number. Then change your TV to that channel in
order to view the output. The default setting is 21.
3.7.10.
RF Audio Type
You can choose the RF audio type. The default setting is B,G 5.5Mhz.
56
3 Settings
3.8.
TV Channel
3.8.1.
Antenna Setup
The Antenna Setup menu controls all the parameters for your
installation. Ensure that your satellite receiver is correctly connected to
your television and dish, and that your satellite signal is of good quality
by checking the Strength and Quality meter. (If you are not sure about
this, then ask your installer to check your installation or satellite signal).
If all of the above parameters are set correctly, you will be able to see
both of the Strength Signal (blue bar) and Quality (red bar) level at the
top of the menu.
57
NOTE
A minimum level of stable signal Quality is required to be able to search
and view the channels.
3.8.1.1.
Satellite Name
1. Select the satellite you want to program. Scroll through the various
satellite using the Navigation (
) buttons and select
the appropriate satellite by press the OK ( ) button.
2. When you select the satellite by pressing the OK ( ) button, the
satellite will be selected and that satellite’s default parameters will
appear.
3. You can adjust the LNB Frequency, DiSEqC, 22KHZ Tone, 0/12V
Switch, LNB Power, TP Frequency, Positioner Setup and Network
Search. The displayed information can be adjusted for each selected
satellite.
58
3 Settings
3.8.1.2.
LNB Frequency
To scan channels, you must select the correct LNB type that you have
on your dish. The default value is for the Universal LNB. Select the
proper LNB type using the
buttons according to the LNB type
you are using.
59
3 Settings
3.8.1.3.
DiSEqC
3.8.1.4.
22KHZ Tone
22KHZ Tone option is set to OFF for each LNB type, but can be turned
ON. If the LNB Frequency is set to Universal, you do not have to use
this option.
3.8.1.5.
0/12V Switch
You can select the option between 0V and 12V.
3.8.1.6.
LNB Power
Set LNB power ON or OFF by using
buttons.
60
3 Settings
3.8.1.7.
TP Frequency
Select a specific transponder by using the
the OK (
buttons, or pressing
) button to view the drop-down list.
3.8.1.8.
Positioner Setup
3.8.1.8.1.
DiSEqC 1.2
This mode will allow you to set the antenna position for each satellite.
In order to use antenna positioner you must use a motor controlled by
DiSEqC 1.2 commands.
To move the antenna, select the desired satellite, transponder and step
size. Then select Move Dish and press the
buttons to move
the antenna West or East. If you selected Continuous for the step size,
the antenna will move continuously until you press another key. Once
the antenna is positioned properly (maximum level in the quality meter),
select Command Mode and choose save. Press the OK (
) button to
save the position. The position number will be displayed next to the
satellite name.
When you want to move the antenna to a saved satellite position, select
the satellite, choose Go To Position from the Command Mode and press
61
3 Settings
the OK (
) button. To clear a saved satellite position, select satellite
then choose Resetting from the Command Mode and press the OK (
)
button.
Setting and enabling East and West limits that the dish can move to is
done.
Setting East Limit: Move the dish to the most eastern position and
press the OK (
) button to store it.
Setting West Limit: Move the dish to the most western position and
press the OK (
) button to store it.
The Limit options are only active if you select Enabling Limits. They are
not active if you select disable Limits.
NOTE
Limits do not need to be set if you have no obstacles or barriers
preventing your dish from the full range of the motor.
62
3 Settings
3.8.1.8.2.
USALS
This mode will allow you to use a DiSEqC 1.3/2.3 motor controlled by
USALS (Universal Satellite Automatic Location System).
The first time you select USALS, you must enter your location (longitude
and latitude). You can also edit the satellite’s position. This will be
necessary if you add a new satellite because it will be set to zero by
default.
Select Go To Position option and press the OK (
) button in the
Command Mode to move the dish to the satellite position.
Select Go To 0 option and press the OK (
) button in the Command
Mode to move the dish to the 0 position.
NOTE
When scrolling through the satellite list in the Antenna Setup menu, the
dish will start to move when you highlight a satellite that has the
Positioner Setup set to DiSEqC 1.2 or USALS (assuming that a DiSEqC
1.2 or USALS motor is connected to your dish). You can avoid this by
returning the Positioner Setup to the OFF state.
63
3 Settings
3.8.1.9.
Network Search
Some of the new transponders being broadcasted in the satellite could
be missing in the given TP list. In this case, there is a good chance that
the information of those new transponders are being sent through the
given TP. So, if you set the Network Search to ‘NIT’ status and search
that TP, then you will be able to catch the channels in those new
transponders.
64
3 Settings
3.8.2.
Satellite Scan
Satellite can be scanned directly from the Satellite Scan menu, Select
Satellite Scan menu and press the OK (
) button.
Scroll through the satellite dropdown list, and select a satellite by
pressing the OK (
) button. When you press the OK(
) button to
start process, you will be given four options in the search criteria: TV
channels, Radio channels, FTA (Free-to-air) channels and Scrambled
channels. You can select or deselect any of the options.
Using the Check (
) button, you can select more than one satellite.
65
3 Settings
Once you have selected the desired satellites, press the OK (
) button
to start searching those satellites. The receiver will search all satellites
selected with the Check (
) button.
To save the searched channel list, press the OK(
3.8.3.
) button.
TP Scan
Individual transponders (TP) can be scanned with TP scan. Scroll
through the satellite dropdown list, and select the satellite to be
scanned. Using the Check (
) button, you can select more than one
satellite.
66
3 Settings
3.8.4.
Advanced Scan
The channel search procedure can be performed in different ways. Start
by selecting the satellite to be searched in the Advanced Scan menu.
The TP frequency can be entered manually by using the Number
buttons, or selected from the dropdown list that appears when you
press the OK (
) button while highlighting the Frequency field. After
entering TP frequency, symbol rate and polarization, modulation, FEC
and Pilot, move the highlight bar to TP Search and press the OK(
)
button to start searching channels.
① TP Frequency: Specify the frequency in MHz.
② Symbol Rate: Enter with the Number buttons.
③ Polarization: Select Horizontal or Vertical.
④ Modulation: DVB-S/QPSK, DVB-S2/QPSK or DVB-S2/8PSK.
⑤ FEC: Select FEC (Forward Error Correction) value or leave as Auto.
⑥ Pilot: 0 or 1.
3.8.4.1.
PID Edit
Use this in case of a specific Transponder which has non-DVB standard
channels and which can only be found when you have entered the
necessary settings. You can also add or delete channels from a specific
67
3 Settings
TP.
1. PCR: Enter the PID (Packet Identifier) for the PCR(Program Clock
Reference).
2. Video: Enter PID for the video signal.
3. Audio: Enter PID for the audio signal.
3.8.5.
SAT/TP Edit
In this menu, you can add/delete the satellites or transponders.
3.8.5.1.
Add satellite (TP)
Press the Add Satellite (
) button to add a new satellite(or TP) to the
receiver. Enter the new satellite (or TP) name and position. The new
satellite (or TP) will be added to the bottom of your list.
3.8.5.2.
Delete Satellite (TP)
Choose the satellite (or TP) you want to delete and press the Delete
Satellite(
) button. You will be asked to confirm that you want to
delete the satellite(or TP) before it is deleted.
68
3 Settings
3.9.
Parental control
In general, television programs are classified according to the level of
violence, nudity and language of their content. You can prevent your
children from watching specific programs by adjusting Parent control
option. In parental control menu, you can set the censorship
classification or change the password.
3.9.1.
Change password
Select the Setting > Parental Control menu. You should see a screen
like the left figure, and you will be asked your Password.
69
3 Settings
The default password is set to ‘0000’.
To change the password, select the Change password menu; enter your
previous password inside the white box and select Change. Then an
input box appears. You can change the password to a desired number.
If anyone is trying to watch a program that is of or above the
censorship setting, the person has to enter the personal identification
number to override.
NOTE
DO NOT FORGET YOUR PASSWORD.
3.9.2.
Menu lock feature
You can also restrict uses of some menus. When you select Enable, you
have to enter the personal identification number when accessing any
menu screens where values can be changed. This can prevent users
from accidentally changing the settings. To release a shut item, set it to
Disable. The default setting is Disable.
3.9.3.
Age rating control / Age limit
If you wish to block 15 or above rated programs, set the Age rating
control option to On, and Age limit option to 15(age). Setting it to 0
blocks no program.
70
3 Settings
When you are watching a program, you can check its program
classification on the information box.
NOTE
If a program does not have any program classification information, your
censorship setting will not take effect.
71
3 Settings
3.10. Data Reset
The digital receiver maintains the following data:
•
•
•
•
•
Satellite list
Services list
Favorite list
Timer list
Preference settings
You can reset all data of the digital receiver. Before you enter the date
reset option, you must input your password.
3.10.1.
Factory setting
If you need to reset the digital receiver back to the factory default
72
3 Settings
condition, select Factory setting. Then a warning message will be
displayed. To confirm, select YES. All satellite and transponder lists will
be set to the factory default. On selecting factory setting you will lose all
of the data and information, which was previously installed.
NOTE
A factory reset will not delete any recorded programs.
3.10.2.
Delete all channels
All channels, for all satellites will be deleted.
3.10.3.
Delete satellite channels
Delete only the channels for a specified satellite.
73
3 Settings
3.11. GOGO-list
Bandwidth
All, C-Band, Ku-Band
Satellite Name
74
4 Main Menu
4. Main Menu
To open Main Menu, wherever you are, press the Home (
) button on
your remote control.
75
4 Main Menu
4.1.
TV
4.1.1.
Watching television
4.1.1.1.
Changing Channels
You can change channels in three ways:
① Press CH ∧/∨ on the front panel, or press CH ∧/∨ (
) or
on the remote control to change channels.
② Press the OK( ) button while using the channel selection.
③ Enter the number of the channel you want to tune using the
number buttons on the remote control.
4.1.1.2.
Adjusting the Volume
Press VOL +/- on the front panel, press VOL +/- (
) or
on the remote control to step through the channel selection. When you
adjust the volume, the volume scale is displayed on the screen.
76
4 Main Menu
4.1.2.
Channel Selection
To view the Channel Selection, press the OK(
)
button.
On the services list, you can see the service information:
① Service number and name
② Transmitting satellite
③ Channel Information
④ Transponder information
To watch a desired channel, put the highlight bar on its entry with the
Navigation buttons and press the OK (
) button, then it will be
presented. You can switch between the television services list and the
radio services list by pressing the TV/Radio (
If you press the Info(
) button.
) button while you use the channel selection,
77
4 Main Menu
the single EPG of the channel will be shown. See § 4.1.3.1.1 for more
details.
4.1.2.1.
How to sort the channels
You can sort the channels; ALL, Satellite, Genre, Provider, Country,
FTA/CAS, and FAV.
① ALL: show the all channels you can watch.
② Satellite: sort the channels by satellite. Then only services
provided by the selected satellite will be listed.
③ Provider: sort the channels by provider. you can view service
entries by groups of broadcasters.
④ FTA/CAS: sort the channels by FTA, CAS, and HD.
⑤ FAV: sort the channels by your preference. See § 4.1.2.2 for more
details.
You can arrange the channels in each category; alphabet(
frequency(
) and default(
),
). Select the mode among the three
modes that you want to sort and press the button on the remote control.
In alphabetical order, you can search the channels with the Number
buttons. See § 4.2.1 for how to use the on-screen keyboard.
78
4 Main Menu
4.1.2.2.
Favorite channel lists
The Favorite channel list (FAV) function is used to organize your channel
list and create and edit your favorite channels. The Maximum number of
FAV groups is 50. And 200 channels per each group.
To select a favorite service, put the highlight bar on a desired group and
press the OK (
) button; a highlight bar appears on its favorite
services list.
Once you select a desired service with the OK (
)
button, it will be
presented. Otherwise, to select other group, press the Exit (
) button.
After you have selected a favorite service, if you then switch to another
service using the
or
button, it will be also another favorite
79
4 Main Menu
service of the selected group.
4.1.2.3.
Channel Edit
To edit the channel, press the Menu (
) button; Lock, Skip, Delete,
Add to favorite, Insert HD flag, Rename, and MOVE.
① Lock: Lock channels. To watch the locked channel, you must enter
your password.
② Skip: Skip channels. But you can watch the channel by press its
channel number.
③ Delete: Delete channels from the channel list. The deleted channel
cannot be recovered unless you do a channel scan again. See §
80
4 Main Menu
3.7.2 for more details.
④ Add to favorite: Add channels into your favorite list. Put the
highlight bar on a desired group and press the OK(
) button.
⑤ Insert HD flag: Insert the HD flag to channels.
⑥ Rename: Change the name of the highlighted service, See § 4.2.1
for how to use the on-screen keyboard.
⑦ MOVE: Move channels to a different position, in FAV category only.
4.1.2.4.
Pressing the Info (
Program Information
) button displays the information box, on which
you can see all of the following:
① Service number and name
② Signal level and quality
③ Program name
④ Program classification symbol
⑤ Broadcasting time
⑥ Current time
Pressing the Info (
) button once more displays detailed information
about the current program. To hide the information box, press the
Exit(
) button.
In addition, you might see the following symbols:
① Lock symbol ( ) means the current service is locked.
② Subtitle symbol ( ) means subtitle tracks are provided on
the current program.
③ Teletext symbol ( ) means teletext pages are provided on
the current service.
④ Dollar symbol ( ) means the current service is a pay
81
service.
⑤ Number symbol (
or number) means the censorship
classification of the program.
⑥ Dolby symbol (
) means a Dolby audio track is provided
on the current program.
When you are not using time-shift, if the EPG is provided on the current
service, you can see the information about the current and next
programs with the
4.1.2.5.
or
button.
Selecting subtitle lists
Some programs are provided with subtitle lists in one or more
languages. If the current program provides subtitle tracks, the subtitle
symbol (
(
) will be marked on the information box. Pressing the Sub-T
) button displays available subtitle tracks. Once you select a
subtitle track, it will be displayed.
82
4 Main Menu
4.1.2.6.
Viewing Teletext
The display of teletext is based on transmitted data using the EBU
Teletext specification and DVB Bitmap and can only be viewed on a TV
that supports teletext. If the current service provides teletext, the
teletext symbol (
Text (
) will be displayed on the information box. Press the
) button to view teletext pages. Each menu shows short
information at the bottom of the screen.
To clear the teletext screen, press the Exit (
4.1.2.7.
) button.
Selecting audio lists
Some programs are provided with audio lists in one or more languages.
Pressing the Lang (
) button displays available audio tracks. Once
you select an audio track, it will be sounded. You can change the audio
output with the
buttons when it is available.
83
4 Main Menu
4.1.3.
EPG (Electronic Program Guide)
84
4 Main Menu
4.1.3.1.
EPG (Electronic Program Guide)
The TV/Radio EPG (Electronic Program Guide) provides an overview of
available TV and Radio channels, and programs the broadcasters have
scheduled for now, next and beyond, depending on which program
information they transmit. To display EPG, press the Guide (
) button
on the remote control.
To see detailed information of a desired program, put the highlight bar
on the program with the navigation button and press the Info(
)
button.
85
4 Main Menu
To watch the selected program, press the OK(
) button. The selected
program will appear when it is broadcasting. If not, you can reserve to
record or watch the channel. See § 4.1.3.2.3 for more details.
NOTE
- For displaying EPG, you will need to set Timer option in SETUP menu.
- A 'Information is not available' message is displayed if the selected
channel has not obtained EPG data.
4.1.3.2.
Single EPG
Single EPG shows the program schedule of the selected channel. To see
single EPG, press the Single EPG (
4.1.3.3.
) button.
Search EPG
To search EPG, press the EPG Search (
) button. Enter the keyword
that you want to search and choose either or both of these options; title
and description.
4.1.4.
PVR (Personal Video Recorder)
NOTE
AZBox Premium HD+ does not support the video cassette recording.
Due to the Macrovision Copy Protection v.7.01, the recorded program
can be distorted.
86
4 Main Menu
4.1.4.1.
PVR
4.1.4.1.1. Internal HDD (AZBox Premium HD+)
HDD should be mounted manually.
87
4 Main Menu
4.1.4.1.2 PVR Ready (USB) – (AZBox Premium HD+)
When you use USB devices such as USB hard-disk drive (HDD) and USB
memory stick, or internal hard-disk drive (HDD) with this receiver, you
should make sure that the HDD be formatted in FAT file system, not
NTFS.
If you tyr to record TV channels on USB Memory stick, it may not
support recording and timeshift properly.
In case you use NTFS formatted HDD,
(a) PVR features are not supported.
(b) The receiver may not boot-up properly.
(c) Even with FAT formatted USB HDD, please connect it to your
receiver only after the receiver completed booting.
(d) If you power on/off the receiver with the NTFS formatted USB
device connected to the receiver, STB may get damaged or
may not start properly.
88
4 Main Menu
4.1.4.2.
Record Live TV
You can instantly record the program you are watching at present. If
the information about program is provided by the EPG, the current
recording will stop when the current program is scheduled to end. If not,
it will record for 2 hours.
To record a program, take the following steps:
1. Press the REC ( ) button during the program or select Record in
the detail menu.
2. Choose the device you want to record and select Yes.
3. To stop recording or extend the recording time, press the REC ( )
button again or select Record Stop in the detail menu.
4.1.4.3.
Reserve Record/Play
You can set a service to be recorded or turned to the channel at a
specific time.
① Channel: select the channel you want to record.
② Part: Record or Play.
③ Repeat: Once, Mon to Fri, Mon to Tue, Wed to Thu, Daily or
User Select. If your favorite program is broadcast at every
Monday and Tuesday and you wish to record every episode of
the program, set this option to Mon to Tue.
④ Start Date/Time: set the desired start date and time.
⑤ Duration: set the desired time, in which the recording will be
finished; 10 minutes to 3 hours.
⑥ Target: HDD or USB.
89
⑦ Program: The recorded program will be stored with this name.
To set a reserve recording with the above settings, select Reservation.
Otherwise, it will not be saved and will not occur.
NOTE
- In normal TV viewing mode the Reserved Program alert banner will
appear on the screen before a reserved program starts.
- You cannot record and play the programs which are being broadcast
at the same time.
90
4 Main Menu
4.1.4.4.
Reserve recordings using the EPG
If the EPG is properly provided, you can make reserve events on it. The
instructions on how to make reserve recordings using the EPG are as
follows:
① Display the EPG in the Detail Menu.
② Select a service you want to record with the
and
buttons.
③ Select a program you want to record with the
and
buttons, and press the OK( ) button.
④ To make a timer event with recording, select record and choose the
device you want to record to. To make a reserve event without
recording, select play.
⑤ This reserve event is placed on the reserved program menu. To
delete the reservation, refer to § 4.1.3.4 for detailed description.
4.1.4.5.
Recording a pay service program
To record a pay service program, you have to record the program with
the subscription card so that they can be recorded in descrambled form.
In that case you can enjoy them without the subscription card like free
services.
To record a program of a pay service in descrambled form, perform the
following steps:
1. Select a program of a pay service you want to record.
2. Make sure that the subscription card is inserted in the slot of the
digital receiver.
3. Start recording.
4. Do not switch to other service nor use time shift until it is finished.
91
4 Main Menu
NOTE
If you switch to other service or use time shift in the middle of
recording a pay program, it will be recorded without descrambling from
that moment. Even if the recording is only partially descrambled, you
need the subscription card to play it back.
4.1.4.6.
Recorded Program
When a program is recorded, it is stored as a file on the built-in hard
disk drive of the digital receiver or USB memory stick. You can select a
recording to play back from the recorded program list. Choose the
device with the
buttons, and select the files with the
buttons on the remote control. Using the Check (
) button, you can
select more than one file to play in a list. Every device has its own list.
You can play, delete, change the preservation time, copy and move a
recording file.
4.1.4.7.
Reserved Program
The Reserved Program option displays date, channel, program and
section for the programs currently reserved by the viewer. To delete a
reserve event, check the items you want to remove with the Check (
button, and press the Menu (
)
) button. If you select delete selection,
they will be deleted.
92
4 Main Menu
4.1.4.8.
Time-Shift
You can pause and resume a live television program, and even rewind
and replay it. When you are watching a program and you miss
something, you can rewind and replay it. Or when your attention is
needed elsewhere, you can pause it and resume it a short time later
without losing any of it. When you do this, you are no longer watching
the live program, instead you are watching a delayed presentation of it.
This is called time shifted television.
Then, you can skip commercials until you catch up to the live broadcast.
In order to use the time shift feature, the Time Shifting option must be
set to HDD or USB. The digital receiver will keep as much as one hour
recording buffer of current service by utilizing the device. The buffer will
reset each time you change to another service. With time shift enabled,
the following operations are possible:
• To go back in time, hold down the
button; to go forward, hold
down the
button.
• You can navigate using the progress bar.
• You can jump forward 10 seconds at a time by pressing the
button.
• You can jump backward 10 seconds at a time by pressing the
button.
• The time difference compared to live program is displayed
momentarily in bottom of screen. A value of - 02:00 means two
minutes behind live program.
• To end time shift, press the
button. The live program will be
presented.
93
4 Main Menu
NOTE
Do not remove the USB while recording a program or using the timeshift. It may cause disorder.
94
4 Main Menu
4.2.
YouTube
4.2.1.
How to search in the YouTube
Press the Search (
and press the OK (
) button. Enter search text in the box that appears
) button on the remote control. The system will
list all entries that contain the entered letter combination.
When accessing an input field where letters are required, the system
automatically goes to letter mode. Writing letters works like on a mobile
phone. Press the button that corresponds to your desired letter.
Press the button as many times as needed to get the right letter.
95
4 Main Menu
Change to lower, upper case letters or back to numbers with the
CAP/NUM
) button, and space with the
button.
NOTE
How to write "AZBox 123" in the input field:
Press the
button once to change to upper case letters
Press the
button once to get an "A".
Press the
button twice to change to lower case letters.
Press the
button three times to get a "z".
Press the
button twice times to get a "b".
Press the
button three times to get an "o".
Press the
button twice to get an "x".
Press the
button once to get space.
Press the
button twice to change to Number.
Press the
button once to get a "1".
Press the
button once to get a "2".
Press the
button once to get a "3".
96
4 Main Menu
4.2.2.
Load Video Lists
You can also search the UCC (User Created Contents) for your interest.
Press the Menu (
) button and select Feed, Category, Time and Site.
The default setting is [featured / all / all time / global]. When you press
the Search (
) button on remote control, the receiver will show the list
based on your preference.
97
4 Main Menu
4.3.
File Play & Management
There are two different ways to play video/audio/photo file from your
device.
• HDD: If HDD is connected to IDE inside the box, user may use this
function to play local files in hard disk drive.
• USB: If USB device is connected to external USB port, user can play
files stored in the USB device.
4.3.1.
Movie / Music / Photo
If you want to run the files that stored in your device, select Movie,
Music or Photo menu.
The screen shows up the supported files stored in the HDD. Move the
cursor to the file to run and press the OK (
) button. If the file that
you want to play is in other folder or device; TV record, Download,
Network or USB, move your cursor to the device and press the OK (
button. Using the Check (
)
) button, you can select more than one file
to play in a list.
You can change the several options in the detail menu.
98
4 Main Menu
4.3.1.1.
Movie
① Set play mode: Play once or Repeat.
② Multi audio: Select Audio
③ Subtitle: Select Position, Size, View, Sync and Language.
④ Screen control: Brightness, Saturation, Contrast, Hue and Zoom.
⑤ Video setup: Full or Auto.
99
4 Main Menu
4.3.1.2.
Music
Set play mode: Standard play, Repeat, Repeat all or Random.
100
4 Main Menu
4.3.1.3.
Photo
① Image optimization: optimize the selected image.
② Start slideshow: Pictures will automatically slide in every 5
seconds.
③ My Album: Create your own album.
④ Arrange: You can arrange the images by its Name, Date or Size.
⑤ File View: List, Thumbnail or Tile.
101
4 Main Menu
4.3.2.
File Management
In file management menu, you can not only play all supported files, but
also create folder, rename or copy files.
Folder option: Create folder, Rename and Arrange.
File option: Copy, Cut and Paste.
102
4 Main Menu
4.3.2.1.
Move files to another folder
To copy, cut and paste files to another folder, perform the following
steps:
1. Select files to copy or cut with the Check( ) button.
2. Press the Menu ( ) button, and select the option you want to
perform with the files.
3. Move your cursor to the folder where you want to paste it.
4. Press the Menu ( ) button, and select the paste option.
103
4 Main Menu
4.4.
RSS News
RSS (Rich Site Summary) is a format for delivering regularly changing
web content. Many news-related sites, weblogs and other online
publishers syndicate their content as an RSS Feed to whoever wants it.
RSS solves a problem for people who regularly use the web. It allows
you to easily stay informed by retrieving the latest content from the
sites you are interested in. You save time by not needing to visit each
site individually.
4.4.1.
Add new category
104
To add a new category, take the following steps:
1. Press the Menu ( ) button. Select the Add new category option,
and press the OK ( ) button.
2. Enter a new category name in the box that appears and press the
OK ( ) button.
4.4.2.
Register new channel
To register a new channel, take the following steps:
1. Press the Menu ( ) button. Select the Register new channel option,
and press the OK ( ) button.
2. Enter a new RSS address in the box that appears and press the OK
( ) button.
NOTE
If you want to delete categories or channels, move your cursor to the
category or the channel that you want to remove, and press the Delete
(
) button on the remote control.
105
4 Main Menu
4.5.
Browser
Select Browser on main menu, it will display the default page set in the
box. If you want to change the default page, press the Set Home (
)
button on the remote control. To surf different web page, you can move
the cursor to the URL box, and type URL address.
4.5.1.
Favorite List
The Favorite list (FAV List) function is used to organize your favorite list
and create and edit your favorite sites. To add your favorite site to your
list, take the following steps:
1. Select the FAV Add option.
106
2. Input the site address. See § 4.2.1 for how to use the on-screen
keyboard.
3. Press the OK( ) button to save the site to your favorite list.
107
5 Network
5. Network
You can connect the digital receiver to the computer. Then you can copy
files to or play files through the network. Before you use the network,
the Settings > Internet menu must be set. When you use a Wi-Fi, you
should know whether you have a good connection. While the receiver is
in stand-by mode, the network runs by itself.
5.1.
Connect the digital receiver to the computer
To connect the digital receiver to the computer, take the following steps:
1. Select the Settings > Storage menu.
2. Input the Workgroup, Server, Account and Password option; (if you
need password) with the Number buttons on the remote control. See
§ 4.2.1 for how to use the on-screen keyboard.
3. Move the cursor to Setup and press the OK (
) button. After the
complete message is received, select Execute with the OK (
)
button.
4. Open “My Network” of your computer, then you can see the folder
that you already named in step 2.
NOTE
Do not stop the File server active condition while you use the network to
send or receive data.
108
5 Network
5.2.
Connect the
receiver.
computer
to
the
digital
To connect the computer to the digital receiver, take the following steps:
5.2.1.
Windows XP
① Computer settings: When you place your mouse on the folder that
you want to share and click the right mouse button, you pop up a
limited menu of commands. Select the “Share and Security” option.
② Check the “Share this folder in Network” option and input the share
name. Then select “Confirm” or “Apply”.
③ Digital receiver settings: Move your cursor to the File Management >
Network option, then the receiver will search for the network
automatically.
④ If your receiver cannot find the network automatically, press the
Menu (
) button and select the Edit IP Address option. You can
input the computer IP address directly with the Number buttons.
5.2.2.
Windows Vista
① Computer settings: Select “Start” > “Network”
② Select “Common Network (User Define)” and set the option to
“Individual”.
③ In “Share and Search” menu, set the “Network Search” option to
109
5 Network
“Use”, “Share File” option to “Use”, “Share Folder” option to “Use” ,
“Share Printer” option to “Use”, “Share protected with Password”
option to “Not Use” and “Share Media” option to “Use”.
④ Check your selection carefully and move to the “My Computer”.
⑤ When you place your mouse on the folder that you want to share
and click the right mouse button, you pop up a limited menu of
commands. Select the Share option.
⑥ Add the Everyone (All users in this list) option and choose “Share”.
⑦ In “Network Search and File Sharing” item, select the “Network
Search and File sharing” option.
⑧ Move to “Control Panel” > “Security Center”. And disable firewall of
your computer. (You must reboot your computer to adjust it.)
⑨ Digital receiver settings: Move your cursor to the File Management >
Network option, then the receiver will search for the network
automatically.
⑩ If your receiver cannot find the network automatically, press the
Menu (
) button and select the Edit IP Address option. You can
input the computer IP address directly with the Number buttons.
110
6 Product specifications / Warranty
6. Product specifications / Warranty
6.1.
Product specifications
6.1.1.
Power specifications
6.1.1.1.
AZBox Premium HD+
Input voltage 11V, 3.4Am / 24V, 800m
Power consumption 60W at maximum in operation
5W in standby
6.1.2.
Physical specifications
6.1.2.1.
AZBox Premium HD+
Size 340 x 243 x 66mm
Gross Weight (w/o HDD) 2.65 kg
Gross Weight (with HDD) 3.04 kg
Net Weight (w/o HDD) 2.11 kg
Net Weight (with HDD) 2.49 kg
Operating temperature 0 to 60 °C
Storage temperature -10°C to +70°C
111
6 Product specifications / Warranty
6.2.
Warranty
6.2.1.
Warranty Terms and Conditions
This warranty must be presented at an OpenSAT authorized repair
service station before any repair can be made under conditions of the
warranty. This warranty is valid only if the Warranty Certificate and
proof of purchase are presented at the OpenSAT repair service station,
in addition to the one year Warranty, issued by OpenSAT Corporation in
the region. Please notice that this warranty is in addition to and does
not affect the customer’s statutory rights.
6.2.2.
Provisions of Warranty
If your product proves to be defective, although it has been used
properly (in accordance with the written Handling Care and Operating
instructions supplied with it), during a period of one year from the date
of purchase from an authorized OpenSAT distributor within the business
area of OpenSAT as stipulated in the authorized distributors list, this
product will be repaired, or at OpenSAT’s option replaced, free of charge.
To claim under this warranty the customer must take the product and
this Warranty Certificate before the end of the one year warranty period
to the dealer where the product was purchased or any other OpenSAT
Service Center within the business area of OpenSAT as stipulated in the
authorized distributor list. During the one year period of the Warranty,
the customer may turn the product in at any OpenSAT service station.
112
6 Product specifications / Warranty
Please note that such OpenSAT Service Center do no exist in all
countries.
The customer shall transport the product to the dealer or OpenSAT
authorized service station at his own risk and shall be responsible for
any costs incurred in transporting the product.
This warranty does not cover the following, and the customer will be
required to pay repair charge, even for defects occurring within the
warranty period referred to above:
① Any defect that occurs due to mishandling (such as an operation
performed that is not mentioned in the Handling Care or other
sections of the instructions, etc.)
② Any defect that occurs due to repair, modification, cleaning, etc.
performed by anyone other than OpenSAT or an OpenSAT
authorized service station.
③ Any defect or damage that occurs due to transport, a fall, shock, etc.
after purchase of the product.
④ Any defect or damage that occurs due to fire, earthquake, flood
damage, thunderbolt, other natural disasters, environmental
pollution and irregular voltage sources.
⑤ Any defect that occurs due to careless or improper storage (such as
keeping the product under conditions of high temperature and
humidity, near insect repellents such as naphthalene or harmful
drugs, etc.), improper maintenance, etc.
⑥ Any defect that occurs due to sand, mud, etc. entering the inside of
the product casing.
⑦ When this Warranty Certificate is not returned with the product.
⑧ When any alterations whatsoever are made to the Warranty
Certificate regarding the year, month and date of purchase, the
customer’s name, the dealer’s name, and the serial number.
⑨ When proof of purchase is not presented with this Warranty
113
6 Product specifications / Warranty
Certificate.
This Warranty applies to the product only; the Warranty does not apply
to any other accessory equipment, such as the Phone cable, Power cord
and Phone splitter.
OpenSAT’s sole liability under this warranty shall be limited to repairing
or replacing the product. Any liability for indirect or consequential loss
or damage of any kind incurred or suffered by the customer due to a
defect of the product, and in particular any loss or damage caused to
any power-cords, phone splitters, other equipment or accessories used
with the product or for any loss resulting from a delay in repair or loss
of data, is excluded. Compelling regulations by law remain unaffected
by this.
6.2.3.
Notes regarding warranty maintenance
This warranty will only be valid if the Warranty Certificate is duly
completed by OPENSAT or an authorized dealer or other documents
contain sufficient proof. Therefore, please make sure that your name,
the name of the dealer, the serial number and the year, month and date
of purchase are all completed or the original invoice or the sales receipt
(indicating the dealer´s name, the date of purchase and product type)
is attached to the Warranty Certificate. OPENSAT reserves the right to
refuse free-of-charge service if neither the Warranty Certificate is
completed nor the above document is attached or if the information
114
contained in it is incomplete or illegible.
Since the Warranty Certificate will not be re-issued, keep it in a safe
place.
6.2.4.
Disclaimer of Warranty
OpenSAT makes no representations or warranties, either expressed or
implied, by or concerning any content of these written materials or
software, and in no case shall be liable for any impelled warranty
purchase are all completed or the original invoice or the sales receipt of
merchantability or fitness for any particular purpose or for any
consequential, incidental or indirect damages (including but not limited
to damages for loss of business profits, business interruption and loss of
business information) arising from the use of inability to use these
written materials or software. Some states do not allow the exclusion or
limitation of liability for consequential or incidental damages, so the
above limitations may not apply to you.
115
7 Appendix A
7. Appendix A. 802.11b/g Specification
802.11b/g channel frequency
FCC (US)
ETSI (Europe)
(GHz)
(GHz)
1
2.412
2.412
2
2.417
2.417
3
2.422
2.422
4
2.427
2.427
5
2.432
2.432
6
2.437
2.437
7
2.442
2.442
8
2.447
2.447
9
2.452
2.452
10
2.457
2.457
11
2.462
2.462*
12
—
2.467*
13
—
2.472*
Channel ID
*Antenna Gain
- Main
2.4GHz : 2.87
2.45GHz : 2.93
- Aux
2.4GHz : 2.71
2.45GHz : 2.97
*RF Modulation Type
- IEEE 802.11g : BPSK, QPSK, 16QAM, QFDM
- IEEE 802.11b : DQPSK, DBPSK, DSSS, CCK
116
8 Appendix B
8. Appendix B. TV Brand List
Brand Name
A.R.Systems
Accent
Acer
Adcom
ADL
Admiral
Adyson
AEA
AEG
Agashi
AGB
Aiko
Aim
Aiwa
Akai
Akashi
Akiba
Akira
<< TV Brand List >>
Setting Number
0037
0352
0556
0455
0009
0037
0556
1339
0625
1217
0093
0363
0418
0264
0216
0037
0556
1556
0606
1163
0216
0264
0516
0009
0037
0556
0371
0035
0433
0191
0264
0037
0412
0556
0208
0706
0805
0701
1908
1505
0361
0208
0371
0037
0433
0745
0035
0009
0753
0729
0714
0163
0715
0602
0556
0480
0631
0216
0178
0377
0606
1908
0473
0648
1935
0860
0009
0218
0282
0455
0556
0418
0374
0163
0216
0361
0753
1537
0191
0218
0516
0548
0264
1037
1259
0037
117
8 Appendix B
Akito
Akura
Alaron
Alba
Alkos
All-Tel
Allstar
Amplivision
Amstrad
Anam
AnamNational
Andersson
Anglo
Anitech
Ansonic
Apollo
ArcenCiel
Arcam
Ardem
Aristona
ArthurMartin
ASA
Asberg
0037
0037
0009
0714
0216
0037
0009
0668
0247
1908
0035
0865
0037
0370
0009
0218
0412
1982
0037
0037
1163
0009
0009
0282
0370
0668
0247
0473
0109
0216
0486
0556
0556
0163
0105
0037
0556
0556
0218
1982
0668
0282
0412
0264
1037
0418
0355
0163
0443
0556
0370
0218
0487
1935
0714
0371
0216
0036
0516
0037
0362
0264
0556
1037
0371
0433
0648
0556
0556
1149
0264
0264
0009
0650
0650
0037
0556
0037
0374
1437
0556
0163
0009
0411
0714
0037
0633
0556
0037
0346
0556
0070
118
8 Appendix B
Asora
Astra
Asuka
ATD
Atlantic
Atori
Auchan
Audiosonic
Audioton
Audioworld
Autovox
AVP
AWA
Axxent
Axxon
B&D
Baird
Barco
BasicLine
Bauer
Baur
Beaumark
Beko
Belson
Bennett
0009
0037
0218
0698
0037
0009
0163
0009
0556
0370
0486
0698
0247
1908
0011
0412
0606
0009
0714
1217
0109
0208
0163
0374
0556
0455
0805
0009
0037
1505
0178
0714
0037
0606
1191
0556
0556
0216
0264
0556
0216
0037
0109
0264
0370
0374
0714
0218
0264
0820
0715
0486
0036
0037
0108
0009
0556
0264
0374
0216
1376
0193
1196
0343
0073
0037
0009
0339
0009
0535
0556
0163
0218
1037
0668
0282
0195
0191
0512
0361
0035
0418
0715
0894
0037
0486
1037
0808
0370
0556
0282
119
8 Appendix B
BenQ
Beon
Berthen
Best
Bestar
Bestar-Daewoo
BlackDiamond
BlackStar
BlackStrip
Blackway
Blaupunkt
BlueSky
BlueStar
Bondstec
Boots
Bosch
BPL
Brandt
Brandt_Electronique
Brinkmann
Brionvega
Britannia
Brother
Bruns
BSR
BTC
Bush
1756
0037
0668
0370
0037
0374
1163
0821
0247
0035
0282
0191
0327
0036
0037
0668
0218
1191
0282
0247
0009
0327
0037
0625
0343
0287
0037
0418
0037
0216
0264
0486
0163
0218
0668
0036
0556
0418
0556
0370
0374
0820
0753
1037
0556
0218
0535
0328
0195
0455
0200
0170
0714
0715
0282
0808
1037
1909
0455
1363
0487
0556
1908
0556
0109
0560
0335
0556
0486
0556
0282
0287
0335
0668
0519
0362
0361
0218
0037
0163
0371
0009
0282
120
8 Appendix B
Canton
Capsonic
Carad
Carena
Carrefour
Carver
Cascade
Casio
Cathay
CCE
Celestial
Centrex
Centrum
Centurion
Century
CGE
Cimline
Cinex
City
Clarivox
Clatronic
Clayton
CMS
Cobolt
Combitech
Concorde
Condor
0355
0264
0208
0556
0778
0218
0264
0610
1037
0455
0036
0170
0009
0037
0037
0037
0819
0780
1037
0037
0247
0074
0370
0009
0648
0009
0418
0037
0218
0009
1037
0216
0891
1908
0009
0037
0363
0361
1556
0714
0374
1037
1259
1900
0519
0487
0698
1908
0037
0556
0668
0037
0070
0556
0037
0556
0037
0556
0556
0556
0820
0891
0556
0163
0821
0556
0084
0163
0218
1556
0418
0247
0037
0370
0264
0648
0556
0371
0556
0606
0070
0714
0247
1163
0556
0370
0216
121
8 Appendix B
Conia
Conrac
Conrad
Contec
ContinentalEdison
Cosmel
Crosley
Crown
CSElectronics
CTC
CTX
CurtisMathes
Cybertron
Cytronix
D-Vision
Daewoo
Dainichi
Daitsu
Dansai
Dansette
Dantax
Datsura
Dawa
Daytek
Dayton
0009
0411
0754
0808
0037
0216
0264
0109
0009
0247
0009
0037
0606
0653
0216
0247
1756
0093
0218
1298
0037
0634
0661
0216
0880
0218
1267
0037
0216
0412
0370
0715
0208
0009
0698
1207
0282
0163
0821
0247
0264
0894
0418
0556
0009
0037
0287
0037
0074
0712
0556
0715
0339
0218
0011
0556
0487
0556
0084
0370
0487
0418
1037
0247
0036
0820
0163
0486
0714
0208
1982
0374
0037
0218
1307
0216
0556
1909
0556
1137
1598
0499
0009
1908
0865
0556
0009
0264
0036
0035
0208
0486
1908
0714
0606
0037
1207
0556
0706
1376
122
Daytron
deGraaf
DEC
Decca
Deitron
Denko
Denver
DER
Desmet
Diamant
Diamond
Digatron
Digihome
Digiline
DigiLogic
Digitex
Digitor
Digivision
DigiX
DiK
Dixi
DL
Domeos
Domland
DreamVision
DSE
DTS
Dual
Dumont
Dunai
0009
0208
0795
0516
1908
0037
0264
0037
0587
0193
0037
0037
0264
0216
0037
1149
0037
0037
0820
0037
0361
0880
0037
0009
0891
0865
0668
0394
1704
0861
0009
0343
0352
0631
0070
0163
0374
0163
0860
0037
0037
0548
0891
0556
0556
0363
0556
0374
0218
0556
0606
1189
0556
0556
0698
0371
0556
0009
0009
0860
0825
0820
0556
0556
0105
0668
0556
0861
0556
0037
0780
0556
0037
1556
0820
0519
0394
1149
0037
0163
1037
1137
0247
0587
0556
1137
123
8 Appendix B
Durabrand
Dux
DVX
Dynatron
EasyLiving
Ecco
Edison-Minerva
Elbe
Elbe-Sharp
Elcit
Elekta
Elfunk
ELG
Elin
Elite
Elta
Emco
Emerson
Emperor
Enzer
Erres
ESC
Est?le
Etron
Eurofeel
EuroLine
Euroman
0037
0037
0891
0037
1248
0773
0487
0435
0037
0411
0516
0247
0009
0282
1208
0037
0216
0548
0218
0009
0247
0714
0556
0361
0163
0282
0753
0037
0037
0163
0001
0163
0264
0037
0216
0370
1437
0556
0556
0556
1259
0706
0362
0556
0610
0370
0218
0516
0163
0191
0361
0516
0037
0163
0556
0264
1037
0556
0037
0361
0037
0264
0556
0163
0556
0216
0105
0009
0247
0070
0486
0037
0282
0370
0037
0820
0556
0009
0264
0037
0556
0178
0371
1909
0668
0556
0556
124
8 Appendix B
Europa
Europhon
Evesham
Excel
Expert
Exquisit
Fagor
FairTec
FamilyLife
Fast
Fenner
Ferguson
Fidelity
Finlandia
Finlux
Firstline
Fisher
Flint
0037
0037
0247
1248
0037
0163
0037
0037
1191
0037
1901
0374
0073
0193
0556
0108
1037
0163
0556
0216
0208
0163
0105
0346
0070
0480
0606
0037
0714
0247
0361
1363
0036
0163
0037
0455
0556
0516
0216
0163
0556
0556
0556
0556
0247
0556
0009
0625
0109
0035
0361
0287
0560
0343
0548
0335
0037
0653
0443
0512
0371
0264
0346
0363
0037
0163
0411
1556
0808
0556
0163
1909
1037
1163
0208
0363
0412
1908
0548
0287
0556
0516
0631
0473
0037
0193
0361
0361
0343
0714
0715
0492
0418
0374
0009
0411
1191
0668
0216
0208
0808
0370
0361
0556
0264
0610
0218
125
8 Appendix B
Force
Forgestone
Formenti
Formenti-Phoenix
Fortress
Fraba
Friac
Frontech
Fujimaro
Fujitsu
FujitsuGeneral
FujitsuSiemens
Funai
Furichi
Futronic
Future
Galaxi
Galaxis
Galeria
GBC
GE
GeantCasino
GEC
Geloso
General
GeneralElectric
GeneralTechnic
Genesis
1149
0193
0163
0216
0216
0093
0037
0009
0499
0247
0163
0865
0163
0556
0009
1298
0668
0860
0264
0037
0037
0370
0009
0163
0363
0343
0287
0163
0163
0556
0247
0374
0109
0343
0009
0009
0037
0556
0486
0556
0037
0610
0264
0370
0556
0370
0363
0009
0009
0361
0163
1259
0264
0352
0853
0037
0795
0556
0556
0418
0860
0361
0037
0163
0556
0009
0374
0218
0178
0109
0282
0335
0560
0625
0361
0037
0516
0009
0363
0163
1163
0412
0287
0287
0037
0556
126
8 Appendix B
Genexxa
Gericom
Goldfunk
Goldhand
GoldStar
Gooding
Goodmans
Gorenje
GPM
Gradiente
Graetz
GranPrix
Granada
Grandin
Gronic
Grundig
0218
0163
0865
0668
0216
0037
0377
0556
0363
0455
0487
0634
0499
1909
0516
0343
0335
1900
1376
0370
0218
0653
0714
0037
0648
0037
0208
0473
0363
0037
0610
0374
1037
0163
0195
0070
0037
0009
1298
0556
0412
1217
0880
0009
0178
0163
0606
0370
0247
0361
0714
0001
0216
0109
0715
1259
0556
0374
0009
0035
0218
0880
1037
0714
0036
0487
0480
1908
1308
0037
0668
0264
0371
0560
0661
0587
0170
0361
0339
0037
0371
0556
0556
0163
1163
0556
0036
0335
0225
0556
0714
0282
0865
0226
0339
0560
0343
0009
0715
0218
1191
0108
0516
0163
0548
0163
0668
0455
0880
0508
0487
0535
0037
0191
0443
127
8 Appendix B
Grunkel
H&B
Haaz
Haier
Halifax
Hammerstein
Hampton
Hanimex
Hanseatic
Hantarex
Hantor
Harsper
Harwa
Harwood
Hauppauge
HCM
Hedzon
Hema
Hicon
Hifivox
Higashi
Highline
Hikona
Hinari
Hisawa
0706
0036
1308
1163
0808
0706
0698
0264
0264
0216
0218
0037
0163
0634
0377
0009
0037
0865
0773
0009
0487
0037
0009
0218
0556
0009
1467
0109
0216
0264
0218
0208
0218
0443
0282
1908
0556
0370
0178
0587
1935
1376
0009
1908
0343
1908
0556
0361
0370
0714
0037
0556
0499
0282
0661
0808
0556
0519
0394
0009
0486
0516
1196
0412
1269
0037
0556
0556
0412
0418
0037
0037
0282
0556
0264
0037
0556
0037
0036
0487
0218
0714
0556
0163
0264
0455
0264
0216
0009
0355
1908
0610
128
8 Appendix B
HISense
Hitachi
HitachiFujian
Hitsu
HMV
Hoher
HomeElectronics
Hornyphon
Hoshai
Huanyu
Hugoson
Hygashi
Hyper
Hypersonic
Hypson
Hyundai
Iberia
ICE
Ices
Ict
IISonic
Iiyama
Imperial
1363
0225
0108
0516
0556
0719
1137
0361
1576
0108
0009
0193
0714
0606
0037
0218
0374
0890
0216
0009
0361
0037
0264
1037
0037
0860
0037
0264
0556
0218
0037
1376
1217
0037
0084
0418
0208
1225
0473
0481
0109
0634
0105
0512
1149
0225
0610
1556
0556
0455
0216
1217
0578
0163
0499
0363
0744
0492
0480
0036
0343
0037
0548
0178
1481
1037
0455
0218
0865
0282
0216
0247
0556
0282
0668
0865
0753
0556
0037
0218
0216
1137
0714
0455
0486
0556
1598
0715
1908
0371
0216
0009
0890
0163
0556
0247
0706
1556
0556
0370
0411
0074
0361
129
8 Appendix B
Indiana
InFocus
Ingelen
Ingersoll
InnoHit
Innovation
Innowert
inotech
Interactive
Interbuy
Interfunk
Internal
International
Intervision
Irradio
Isukai
ITS
ITT
ITTNokia
0037
1164
0487
0361
0009
0009
0516
0519
0865
0773
0037
0163
0411
0009
0512
0037
0163
0247
0037
1909
0216
0282
0377
0394
0264
0009
0247
0218
0455
0037
0264
0163
0548
0208
0361
0480
0556
0610
0714
0163
0037
0247
0037
1298
0820
0556
0361
0556
0282
0556
0218
1163
0512
0370
0327
0109
0037
0556
0556
0361
0200
0556
0264
0247
0512
0370
0327
0109
0499
0374
0455
0519
0487
0247
0037
0371
0037
0037
0486
0218
0009
0556
0371
0370
0163
0556
0218
0556
0282
0371
0216
0480
0193
0610
0548
0346
0218
0009
0361
0346
0282
0556
0473
0339
0163
0208
0473
0339
130
8 Appendix B
ITV
JDV
Jean
JEC
JMB
Jocel
Jubilee
JVC
Kaisui
Kambrook
Kamp
Kapsch
Karcher
Kathrein
Kawa
Kawasho
KBAristocrat
Kendo
Kennedy
Kennex
Kenwood
Kingsley
Kiota
Kiton
Kneissel
0606
0264
0374
1982
0036
0035
0037
0556
0712
0556
0653
0218
0650
0218
0216
0377
0216
0163
0037
0163
0714
0556
0371
0216
0163
0610
0519
0363
0648
0163
1037
0105
0216
0001
0556
0037
0610
0037
0631
0556
0363
0247
0499
0443
0634
1908
0374
0036
0606
0193
0418
0371
0093
0282
0455
0037
0009
0556
0361
0556
0282
1556
0037
0370
0264
0606
0610
0778
0037
0512
0411
1037
0435
0556
0370
0247
1437
0163
0377
0362
0486
0037
0370
0668
0610
0411
131
8 Appendix B
Kobra
Kolster
Konichi
Konka
Kontakt
Korpel
Korting
Kosmos
Kotron
Koyoda
Kuba
KubaElectronic
Kyoshu
Kyoto
L&SElectronic
LaSAT
Lavis
Leader
Lecson
Legend
Lemair
Lenco
Lenoir
Lesa
LevisAustria
Lexsor
Leyco
LG
0374
0362
1467
0037
0009
0037
0418
0754
0487
0037
0370
0037
0412
0009
0163
0163
0412
0163
0865
0486
1037
0009
0037
0009
0411
0037
0556
0009
0247
0037
1196
0264
0037
0377
0714
0109
0499
1908
0556
0435
0556
0247
0218
0556
0218
0894
0371
0641
0714
0587
0556
0556
0264
0418
0216
0714
0370
0037
0264
0163
0556
0009
0587
0163
1037
0374
0556
0037
0178
1265
0216
0698
0556
0370
0001
0163
0715
0009
0556
0606
1637
132
8 Appendix B
Liesenk&Tter
Liesenkotter
Lifetec
Lloyd's
Lodos
Loewe
Logik
Logix
Luker
Luma
Lumatron
LuxMay
Luxor
LXI
Madison
Magnadyne
Magnafon
Magnavox
Magnum
Mandor
Manesth
Manhattan
1191
0361
0327
0037
0037
0668
0556
0714
0001
1037
0512
0556
0011
0193
0880
0668
1982
0037
0556
0363
0163
0037
1163
0361
0346
0178
0037
0247
0516
0037
0648
0715
0264
0037
0163
0037
1423
1305
0247
0037
0327
0009
0512
0218
0556
0328
0519
1037
0264
0556
0374
1137
1248
0009
1149
0633
0370
0698
0264
1217
0519
0790
0362
0773
0371
1037
0037
0516
0009
0001
0363
0374
0037
0361
0009
0363
0208
0473
0163
0009
0556
0264
0556
0480
0548
1037
0411
0362
0362
0073
0556
0516
0216
0556
0714
1289
0163
0073
0036
0037
0780
0556
0264
0035
0668
1037
0556
0363
0556
0492
0163
0631
133
8 Appendix B
Marantz
Mark
Master's
Masuda
Matsui
Matsushita
Matsuviama
Maxam
Maxdorf
Maxim
MCE
Mediator
Medion
Megas
Megatron
MEI
Melectronic
Memorex
Memphis
Mercury
1267
0037
0037
0009
0499
0218
0037
0037
0011
0433
0163
0195
1908
0650
0587
0264
0773
1982
0009
0037
0037
0668
0698
1900
0610
0178
1037
0346
0343
0009
0411
0634
0661
0009
0009
0001
0163
0556
0556
0714
0037
0371
0556
0556
0355
0443
0516
0191
1037
0778
0412
0216
0715
0374
0009
0264
0487
0036
0363
0035
0335
0009
0371
0455
0208
0714
0808
0512
1037
0880
0519
1137
1437
1289
0037
0037
0247
0480
0163
0361
0714
0178
0556
0512
0105
0492
0287
0191
0109
0374
0216
0556
0195
0037
0009
1556
0556
0714
0556
1908
1248
0650
0556
134
Merritt
Metz
MGA
Micromaxx
Microstar
MicroTEK
Mikomi
Minato
Minerva
Minoka
Mirror
MistralElectronics
Mitsubishi
MitsuriGeneral
Mivar
Monaco
Morgan's
Motorola
MTC
MTlogic
Multibroadcast
Multitec
Multitech
Murphy
Musikland
0548
0388
1163
0037
1037
0178
0037
0808
0808
0820
1149
0037
0487
0191
0412
1900
0193
0108
0178
0556
0163
0370
0009
0037
0093
0370
0361
0714
0193
0037
1037
0009
0370
0264
0216
0037
0361
0447
0195
0556
1533
0037
0556
0163
0746
0535
0587
0367
0191
0668
0556
0668
0218
1037
0556
0535
0516
0037
0195
0108
0556
0070
0093
0036
0208
0512
0193
1037
0037
0535
0216
0609
0516
0163
0216
0486
0668
0486
0216
0037
0247
0247
0556
0556
0512
1308
0556
1556
0363
0556
0163
0218
135
8 Appendix B
MyCom
Myryad
NAD
Naiko
Nakimura
Naonis
Narita
NAT
National
NEC
Neckermann
NEI
Neovia
Nesco
Netsat
Neufunk
NewTech
NewWorld
Nicamagic
Nikkai
Nikkei
Nikko
Nobliko
Nogamatic
Nokia
1376
0556
0178
0037
0374
0363
1982
0226
0226
0170
0036
0037
0499
0037
0200
0418
0512
0037
0865
0247
0037
0037
0218
0037
0218
0216
0218
0035
0714
0178
0070
0109
0361
0492
0374
0610
0178
0037
0361
1982
0037
0163
0163
0606
0556
0556
0587
0455
0556
0653
0191
0556
0247
1170
0009
0011
0661
0370
0163
0411
1270
0374
1704
0556
1376
1908
0556
0009
0282
0009
0371
0163
0556
0714
0556
0610
0037
0216
0556
0009
0264
0036
0480
0339
0606
0548
0208
0346
1505
0327
0363
0343
0216
0163
0473
0631
0109
136
8 Appendix B
Nordmende
Norfolk
Normerel
Novak
Novatronic
NU-TEC
Nurnberg
Oceanic
Odeon
Okano
Olidata
Omega
Omni
Onwa
Opera
Optimus
Optonica
Orbit
ORcom
Orion
Orline
Ormond
Orsowe
Osaki
Osio
Oso
Osume
OttoVersand
0109
0560
0556
0163
0037
0037
0037
0455
0163
0163
0548
0264
0370
0009
1376
0264
0780
0371
0037
0650
0093
0037
1504
0037
0714
0412
1196
0037
0668
0516
0218
0374
0037
0218
0036
1505
0714
0343
0335
0891
0195
0163
0287
0037
1259
0374
0556
0208
0473
0037
0556
0264
0891
0602
0556
0698
0218
0433
0443
0011
0516
0355
0009
1908
0556
0264
0880
0218
1037
0556
0037
0556
0264
0355
0556
0037
0556
0412
0218
0036
0037
0093
0556
0512
0556
0556
0105
0698
0361
0361
0480
0556
137
8 Appendix B
Pace
Pacific
Pael
Palladium
Palsonic
Panama
Panashiba
Panasonic
Panavision
Papouw
PatheCinema
PatheMarconi
Pausa
Perdio
Perfekt
Philco
Philex
Philips
0037
0191
0247
0516
1908
0037
1037
0216
0370
1137
0418
0163
0264
0218
0001
0009
0556
0001
0650
0367
0163
0853
0037
0037
0163
0109
0009
0163
0556
0037
0084
0163
0519
0193
0556
0343
0556
0361
0009
0519
0535
0109
0282
0195
0226
0343
0556
0443
1137
0714
0037
0191
0556
0519
0412
0698
0418
0264
0247
0411
1505
0247
0363
0037
0556
0778
0216
0714
0200
0327
0108
0516
0548
0178
0411
0556
0216
0226
0037
1310
0361
0556
0001
0037
0216
0282
0556
0074
0370
0418
0037
0247
0556
0163
0037
0374
0191
0361
0193
0009
0377
0773
1196
0037
0556
0370
138
Phocus
Phoenix
Phonola
Pilot
Pioneer
Pionier
Plantron
Playsonic
Policom
Polytron
Poppy
Portland
Powerpoint
Prandoni-Prince
Premier
President
Prima
Princess
Prinston
Prinz
Profex
Profi
Profitronic
Proline
Prosonic
Protech
0200
1289
0037
0163
0037
0556
0760
0556
0361
0486
0370
0037
0714
0109
0074
0282
0009
0374
0487
0247
0009
0860
0009
0698
1037
0361
0009
0009
0037
0037
0411
0037
0371
0037
0264
0163
1756
1308
0556
0216
0556
0037
0011
1260
0109
0512
0486
0556
0037
0361
0084
0714
0370
0486
0193
0712
0037
0370
0163
0216
0706
0170
0343
0287
0264
0339
0163
0535
0009
0715
0070
1909
0037
0516
0264
0556
0361
0698
0363
0264
0412
1269
0163
0361
0363
0625
0634
0370
0714
0009
0668
1037
0374
0216
0247
0282
0556
0556
1376
0556
0668
0556
0418
0486
139
8 Appendix B
Proton
Provision
PVision
Pye
Pymi
Quadral
Quasar
Quelle
Questa
R-Line
Radialva
Radiola
Radiomarelli
RadioShack
Radiotone
Rank
RankArena
RBM
RCA
Realistic
Recor
Rectiligne
Rediffusion
Redstar
Reflex
Relisys
0178
0499
0714
1191
0037
0009
0218
0247
0037
0512
0036
0084
0668
0264
0036
0037
0109
0556
0037
0516
0037
0009
0418
0264
0070
0036
0070
0625
0343
0178
0037
0037
0361
0037
0037
0865
0037
0556
1037
0556
0374
0412
0650
1505
0535
0247
0328
0556
1037
0865
0011
0191
0074
0070
0195
0346
0009
0109
0361
0327
0105
0200
0009
0556
0218
0287
0556
0247
0556
0037
0412
1037
0163
0163
0037
0602
0753
0093
0753
0560
0418
0556
0548
0556
0556
0877
0556
0037
0178
0556
0648
0556
0370
0668
0335
0036
0346
1037
1207
0668
1298
140
8 Appendix B
Reoc
Revox
Rex
RFT
Rhapsody
Ricoh
Rinex
Roadstar
Rodex
Rover
Rowa
RoyalLux
Rukopir
Saba
Sagem
Saisho
Saivod
Saka?
Sakyno
Salora
Salsa
Sambers
Samsung
0714
0037
0363
0264
0370
0486
0216
0037
0773
1037
0556
0264
0037
0036
0264
0216
0370
0556
0625
0287
0498
0714
0610
0618
0516
0264
0037
0668
0163
0455
0163
0548
0335
0516
0618
0556
0634
0556
0411
1909
0370
0247
0163
0264
0037
0556
0418
0668
1189
0037
0218
1900
0712
0037
0335
0009
0556
0560
0516
0548
0343
0361
0650
0455
0282
0830
0009
0011
0163
1982
0712
0556
1037
1163
0361
0339
0516
0208
0363
0480
0587
1249
0037
0093
0178
1235
0556
0418
0009
0714
0282
0556
0877
0698
0587
0412
0037
0109
0163
0335
141
8 Appendix B
Sandra
Sansui
Santon
Sanyo
Save
Saville
SBR
SchaubLorenz
Schneider
Scotland
Scott
Sears
Seaway
Seelver
SEG
SEI
Sei-Sinudyne
Seitech
Seleco
0009
0208
0216
0037
0371
0753
0009
0208
0370
0163
0486
0037
1908
0037
0548
0486
1137
0394
0371
1037
1909
0163
1189
0178
0634
0556
0037
0668
0264
0362
1909
1505
0556
0516
1217
0363
0370
0519
0264
0163
0216
0625
0729
0602
0556
0455
0706
0861
1208
0339
0037
0170
0556
0036
0216
0108
0011
0009
0556
0556
0714
0374
0037
0352
0361
0163
1908
0193
0361
1191
0556
0343
0218
0648
1982
0606
0519
0247
0668
0714
0070
0178
1037
0556
0487
0634
0216
1901
0163
0037
1037
0009
0036
1163
0714
0516
1505
0037
0556
0362
0163
0411
1437
0163
0247
0218
0037
142
8 Appendix B
Sencora
Sentra
Serino
Sharp
Shintoshi
Shivaki
Show
Siarem
Siemens
Siera
Siesta
Silva
SilvaSchneider
Silver
SilverCrest
Singer
Sinotec
Sinudyne
Sky
Skymaster
Skysonic
Sliding
SLX
Smaragd
0371
0435
0009
0035
0610
0093
0193
1393
0037
0037
0178
0418
0163
0191
0327
0361
0037
0370
0037
0648
1556
0036
0556
1037
0009
0247
0773
0163
0037
0037
0556
0105
0753
0865
0668
0487
0036
0264
0346
0218
0455
1193
0516
1163
0556
0556
0009
0216
0036
0200
0093
0653
0760
0443
0374
0009
0516
0535
0328
0200
0037
0195
0556
0556
0587
0556
0216
0361
0037
0715
0037
1537
0435
0455
0163
0556
0037
0335
0361
0361
0556
0282
1504
0516
1908
0880
1505
0556
0163
0178
0880
143
8 Appendix B
Soemtron
Solavox
Sonawa
Soniko
Soniq
Sonitron
Sonneclair
Sonoko
Sonolor
Sontec
Sony
Sound&Vision
Soundesign
Soundwave
Soyea
Spectra
Ssangyong
Staksonic
Standard
Starlite
Stenway
Stern
Stevison
Strato
Strong
SunicLine
Sunkai
0865
0361
0556
0218
0037
1467
0208
0037
0037
0282
0208
0361
0037
1505
0353
0093
0218
0178
0037
0773
0009
0009
0009
0037
0009
0009
0264
0282
0163
0435
1982
0037
1163
0556
0037
0355
1298
0163
0548
0037
0556
0370
0556
0556
0339
0009
0264
0163
0282
0556
1651
0036
0170
0374
1505
0548
0370
0011
0037
0074
0037
0009
1751
0556
0556
0418
0715
0556
0374
0163
0412
0218
0363
1037
0218
0037
0556
0264
0411
1556
0556
1149
0264
1037
0009
0037
0556
0455
0218
0610
0556
144
8 Appendix B
Sunstar
Sunwatt
Sunwood
Superla
Supersonic
SuperTech
Supra
Susumu
Sutron
Svasa
Swissline
Swisstec
Sydney
Sysline
Sytong
T+A
Tandberg
Tandy
Tashiko
Tatung
TCM
Teac
TEC
0037
0371
0264
0455
0037
0516
0208
0805
0009
0218
0178
0335
0009
0805
0247
1504
0216
0037
0216
0447
0367
0361
0218
0036
0363
1556
0011
1191
0714
0698
1037
0455
0178
0418
1755
0009
0556
0037
0487
0556
0556
0216
0556
0455
0037
0009
0374
0218
0009
0287
0865
0009
0698
0264
0556
0216
0880
0556
0411
0163
0247
0170
0109
0362
0093
0216
0163
0163
0037
1908
0556
1756
0516
1259
1289
0512
0556
0706
0009
0170
0808
0037
0712
0264
0412
0714
1437
0668
1909
0282
1149
0247
0335
0037
145
8 Appendix B
TechLine
TechLux
Techica
Technica
Technics
TechniSat
Technisson
Technosonic
Techwood
Tecnimagen
Tedelex
Teiron
Teleavia
Telecor
Telefunken
Telefusion
Telegazi
Telemeister
Telesonic
Telestar
Teletech
Teleton
Televideon
Teleview
0556
0037
1163
1189
0218
1982
0650
0037
0714
0037
1163
0556
0418
0706
0891
0009
0109
0037
0394
0625
0109
0498
1504
0073
0714
0037
0037
0556
0037
0037
0009
0037
0247
0163
0163
0037
0361
0556
0163
0668
1437
0556
1289
0556
0163
1267
0606
0208
0037
1537
0698
0556
0009
0587
0287
0556
0343
0163
0218
0560
0698
0820
0287
0037
1556
0556
0163
0074
0343
0896
0084
0556
0346
0587
0712
0754
0335
0486
0821
0218
0264
0556
0668
0412
0009
0556
0556
0037
0556
1037
0036
0216
0556
0363
146
8 Appendix B
Tempest
Tennessee
Tensai
Tenson
Tesla
Tevion
Texet
Thomson
Thorn
Thorn-Ferguson
Tiny
TMK
Tobishi
Tokai
Tokaido
Tokyo
Tomashi
Tongtel
Topline
Toshiba
0009
0037
0218
0105
0247
0009
0037
0519
0037
0648
1037
0374
0625
0109
0216
0108
0225
0074
0037
0512
0070
0108
0335
1196
0178
0218
0037
0374
1037
0216
0282
0780
1037
0508
0036
0718
0037
0556
0037
0374
0715
0556
0264
0556
0371
0163
0009
0377
1037
0894
1556
0668
1248
0009
0560
0335
1259
0556
1137
1289
0216
0343
0037
1298
0808
0714
0193
0343
0084
0556
0036
0109
0361
0499
0011
0374
0073
1505
0535
0335
0035
0109
0499
1269
0193
0073
0361
0035
0556
0009
0668
1037
0163
0035
0218
0587
0668
1508
0070
0195
0035
0714
0191
1289
0109
0618
0218
0287
0556
147
8 Appendix B
Toyoda
Trakton
TransContinens
TRANScontinents
Transonic
Transtec
Triad
Trident
Tristar
Triumph
Tsoschi
TVTEXT95
Uher
Ultravox
UnicLine
United
Universal
Universum
1908
1164
1265
0009
0009
0668
0486
0865
0037
0512
0418
0216
0037
0516
0264
0516
0282
0556
0037
0486
0374
0037
0037
0714
1908
0037
0346
0535
0480
0011
0070
0411
1505
0631
1037
1149
0009
1163
0650
0371
0264
1037
0698
1935
1704
0264
0037
1556
0037
0556
0556
0264
0009
0455
0698
0587
0712
0556
0218
0218
0346
0193
0556
0556
0370
0247
0556
0556
0037
1037
0556
0105
0361
0370
0037
0163
0074
0668
0009
1437
0618
0374
0480
0216
0418
0473
0715
0587
0455
0556
1982
0195
0247
0200
0512
0264
0327
0109
0084
0170
0473
0492
0418
0036
0556
0328
0362
1901
1163
0037
0163
148
8 Appendix B
Univox
Utax
V7Videoseven
Vestel
Vexa
Victor
Videologic
Videologique
Videosat
VideoSystem
Videotechnic
Videoton
Vidtech
ViewSonic
Visiola
Vision
Vistar
Vortec
Voxson
Waltham
Watson
WattRadio
Wega
Wegavox
Welltech
Weltblick
Weston
Wharfedale
0037
0163
1755
1217
0037
1037
0009
0653
0218
0216
0247
0037
0216
0163
0036
1755
0216
0037
0361
0037
0037
0163
0418
0668
0443
1037
0163
0519
1376
0163
0037
0009
0714
0037
0037
0037
0556
0163
0178
0880
1376
0163
1163
0037
0556
0668
0556
0216
0218
0556
0374
0178
0264
0556
0556
0178
0287
0109
1248
0009
0394
0327
0216
0556
0037
0556
0556
0861
0556
0363
0418
0037
1037
0556
0163
0037
0668
1908
0556
0218
1437
0036
0556
0519
0896
149
WhiteWestinghouse
Windsor
Windstar
WindySam
Wintel
World-of-Vision
Worldview
X-View
Xenius
XLogic
Xoro
Xrypton
Yamaha
Yamishi
Yokan
Yoko
Yorx
Zanussi
Zenith
Zenor
ZX
0556
0216
0668
0282
0556
0714
0880
1298
0455
1191
0634
0698
1196
0037
0650
0282
0556
0037
0037
0009
0247
0218
0363
1909
0339
1908
1556
0037
1037
0556
1909
0890
0877
0865
1217
1289
0860
1217
0556
1576
0455
0218
0037
0556
0556
0370
0218
0339
0264
0216
150
9
Appendix C
9
151
9
Appendix C
9. Appendix C. R&TTE Declaration
Česky
[Czech]:
Dansk
[Danish]:
Deutsch
[German]:
Eesti
[Estonian]:
English:
Español
[Spanish]:
Ελληνική
[Greek]:
Français
Opensat, Lda tímto prohlašuje, že tento High Definition
Set Top Box AZBox Premium HD + je ve shodě se
základními požadavky a dalšími příslušnými ustanoveními
směrnice 1999/5/ES.
Undertegnede Opensat, Lda erklærer herved, at følgende
udstyr High Definition Set Top Box AZBox Premium HD +
overholder de væsentlige krav og øvrige relevante krav i
direktiv 1999/5/EF.
Hiermit erklärt Opensat, Lda, dass sich das Gerät High
Definition Set Top Box AZBox Premium HD + in
Übereinstimmung mit den grundlegenden Anforderungen
und den übrigen einschlägigen Bestimmungen der
Richtlinie 1999/5/EG befindet.
Käesolevaga kinnitab Opensat, Lda seadme High
Definition Set Top Box AZBox Premium HD +vastavust
direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist
tulenevatele teistele asjakohastele sätetele.
Hereby, Opensat, Lda declares that this High Definition
Set Top Box AZBox Premium HD +is in compliance with
the essential requirements and other relevant provisions
of Directive 1999/5/EC.
Por medio de la presente Opensat, Lda declara que el
udstyr High Definition Set Top Box AZBox Premium HD +
cumple con los requisitos esenciales y cualesquiera otras
disposiciones aplicables o exigibles de la Directiva
1999/5/CE.
ΜΕ ΢ΗΝ ΠΑΡΟΣ΢Α Opensat, Lda ΔΗΛΩΝΕΙ Ο΢Ι udstyr
High Definition Set Top Box AZBox Premium HD +
΢ΣΜΜΟΡΦΩΝΕ΢ΑΙ ΠΡΟ΢΢Ι΢ΟΣ΢ΙΩΔΕΙ΢ΑΠΑΙ΢Η΢ΕΙ΢ΚΑΙ
΢Ι΢ ΛΟΙΠΕ΢ ΢ΧΕ΢ΙΚΕ΢ ΔΙΑ΢ΑΞΕΙ΢ ΢Η΢ ΟΔΗΓΙΑ΢
1999/5/ΕΚ.
Par la présente Opensat, Lda déclare que l'appareil High
152
[French]:
Italiano
[Italian]:
Latviski
[Latvian]:
Lietuvių
[Lithuanian]:
Nederlands
[Dutch]:
Malti
[Maltese]:
Magyar
[Hungarian]:
Polski
[Polish]:
Definition Set Top Box AZBox Premium HD + est
conforme aux exigences essentielles et aux autres
dispositions pertinentes de la directive 1999/5/CE.
Con la presente Opensat, Lda dichiara che questo High
Definition Set Top Box AZBox Premium HD + è conforme
ai requisiti essenziali ed alle altre disposizioni pertinenti
stabilite dalla direttiva 1999/5/CE.
Ar šo Opensat, Lda deklarē, ka High Definition Set Top
Box AZBox Premium HD + atbilst Direktīvas 1999/5/EK
būtiskajām prasībām un citiem ar to saistītajiem
noteikumiem.
Šiuo Opensat, Lda ] deklaruoja, kad šis High Definition
Set Top Box AZBox Premium HD + atitinka esminius
reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.
Hierbij verklaart Opensat, Lda dat het toestel High
Definition Set Top Box AZBox Premium HD + in
overeenstemming is met de essentiële eisen en de
andere relevante bepalingen van richtlijn 1999/5/EG.
Hawnhekk, Opensat, Lda , jiddikjara li dan High
Definition Set Top Box AZBox Premium HD + jikkonforma
mal-ħtiġijiet essenzjali u ma provvedimenti oħrajn
relevanti li hemm fid-Dirrettiva 1999/5/EC.
Alulírott, Opensat, Lda nyilatkozom, hogy a High
Definition Set Top Box AZBox Premium HD + megfelel a
vonatkozó alapvetõ követelményeknek és az 1999/5/EC
irányelv egyéb elõírásainak.
Niniejszym Opensat, Lda oświadcza, że High Definition
Set Top Box AZBox Premium HD + jest zgodne z
zasadniczymi wymaganiami oraz innymi stosownymi
postanowieniami Dyrektywy 1999/5/WE
Português
Opensat, Lda declara que este High Definition Set Top
[Portuguese]: Box AZBox Premium HD + jest está conforme com os
requisitos essenciais e outras disposições da Directiva
1999/5/CE.
Slovensko
Opensat, Lda izjavlja, da je ta High Definition Set Top
[Slovenian]:
Box AZBox Premium HD + v skladu z bistvenimi
153
Slovensky
[Slovak]:
Suomi
[Finnish]:
Svenska
[Swedish]:
Íslenska
[Icelandic]:
Norsk
[Norwegian]:
zahtevami in ostalimi relevantnimi določili direktive
1999/5/ES.
Opensat, Lda týmto vyhlasuje, že High Definition Set Top
Box AZBox Premium HD + spĺňa základné požiadavky a
všetky príslušné ustanovenia Smernice 1999/5/ES.
Opensat, Lda vakuuttaa täten että High Definition Set
Top Box AZBox Premium HD + tyyppinen laite on
direktiivin 1999/5/EY oleellisten vaatimusten ja sitä
koskevien direktiivin muiden ehtojen mukainen.
Härmed intygar Opensat, Lda att denna High Definition
Set Top Box AZBox Premium HD + står I
överensstämmelse med de väsentliga egenskapskrav och
övriga relevanta bestämmelser som framgår av direktiv
1999/5/EG.
Hér með lýsir Opensat, Lda yfir því að High Definition Set
Top Box AZBox Premium HD + er í samræmi við
grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun
1999/5/EC
Opensat, Lda erklærer herved at utstyret High Definition
Set Top Box AZBox Premium HD + er i samsvar med de
grunnleggende krav og øvrige relevante krav i direktiv
1999/5/EF.
Manufacturer
TG Korea 1125-1 Shingil-dong, Danwon-gu, Ansan-city, Kyunggi-do, 425839, Korea
Authorised Representative
OPENSAT Lda., Edifício Opensat- Lagoa S/N – Mazedo , 4950-283 Monção,
PORTUGAL
154