Siemens IEEE802.11 Specifications

6
© Siemens AG 2014
Industrial Wireless Communication
6/2
Introduction
6/3
6/3
6/6
6/10
Industrial Wireless LAN (IWLAN)
Introduction
Application examples
Overview of network components
6/13
IWLAN – Access Points
IEEE 802.11n
Overview
SCALANCE W788 RJ45
for use in control cabinet
SCALANCE W788 M12 for indoor use
SCALANCE W788 M12 EEC
for enhanced environmental conditions
SCALANCE W786 RJ45
for outdoor use
SCALANCE W786 SFP
for outdoor use
SCALANCE W774 RJ45
for use in control cabinet
SCALANCE W774 M12 EEC
for enhanced environmental conditions
SCALANCE W761 RJ45
for the Control Cabinet
6/13
6/16
6/23
6/30
6/35
6/42
6/47
6/52
6/57
6/62
6/62
6/66
6/70
6/74
6/78
6/83
6/88
IWLAN – Controller and
Controller Access Points
IEEE 802.11n
Overview
SCALANCE WLC711
industrial wireless LAN controller
SCALANCE W788 RJ45 controller
access points for use in control cabinet
SCALANCE W788C M12 controller
access points for indoor use
SCALANCE W788C M12 EEC
for enhanced environmental conditions
SCALANCE W786 RJ45 controller
access points for outdoor use
SCALANCE W786C SFP controller
access points for outdoor use
6/92
6/92
6/95
6/100
6/105
6/110
6/114
IWLAN – Client Modules
IEEE 802.11n
Overview
SCALANCE W748 RJ45
for use in control cabinet
SCALANCE W748 M12
for indoor use
SCALANCE W734 RJ45
for use in control cabinet
SCALANCE W722 RJ45
for use in control cabinet
SCALANCE W721 RJ45
for use in control cabinet
6/118
6/118
6/134
6/139
6/148
6/150
IWLAN – Accessories
IWLAN antennas
IWLAN RCoax cables
IWLAN cabling technology
KEY-PLUG W700
Power Supply PS791-2DC
and PS791-2AC
6/152
6/152
Wireless Devices
SIMATIC Mobile Panel 277(F) IWLAN
6/162
6/162
6/163
WirelessHART
General
SITRANS P280
for gauge and absolute pressure
SITRANS TF280, WirelessHART
SITRANS AW200 WirelessHART
adapter
SITRANS AW210 WirelessHART
adapter
IE/WSN-PA LINK
6/167
6/170
6/174
6/178
Siemens IK PI · 2015
© Siemens AG 2014
Industrial Wireless Communication
Introduction
■ Overview
Wireless communications offer multiple new opportunities to
the industry for the development of highly flexible and efficient
automation solutions. Whether Wireless Remote Networks,
RUGGEDCOM WiN, Industrial Wireless LAN or WirelessHART,
the Siemens product line for Industrial Wireless Communications
is reliable, robust, and secure. The components are used under
the toughest indoors and outdoors conditions. Their multiple applications in crane systems, automatic guided vehicle systems,
or in remote operation/remote maintenance systems are a testimonial to their exceptional reliability.
RUGGEDCOM WiN
Wireless communication options
6/2
Siemens IK PI · 2015
G_IK10_XX_30229
Industrial Wireless
LAN
WirelessHART
For more information about RUGGEDCOM WiN, go to
http://www.ruggedcom.com/products/ruggedwireless/.
Further information on Industrial Wireless Telecontrol can be
found under the product entries for GSM, GPRS and UMTS
modems and routers in the section on Industrial Remote Communication.
More information on WirelessHART can be found under the
product entries for WirelessHART as well as in Catalog FI 01 and
at http://www.siemens.com/wirelesshart.
Wireless Remote
Networks
6
RUGGEDCOM WiN products to the IEEE 802.16e-2005 (WiMax)
standard support longer distances and are specially designed
for use in critical locations and under demanding environmental
conditions.
© Siemens AG 2014
Industrial Wireless Communication
Industrial Wireless LAN (IWLAN)
Introduction
■ Overview
SCALANCE W – wireless communication with Industrial
Wireless LAN
The SCALANCE W products provide a combination of reliability,
ruggedness and security in a single product:
• For use by industrial and automation customers
• For outdoor use under demanding climatic conditions
• For low-cost integration in the control cabinet or in devices
The Industrial Wireless LAN (IWLAN) technology provides an
extension to the IEEE 802.11 standard that is particularly suited
to demanding industrial applications with real-time and redundancy requirements. This provides customers with a unique
wireless network, both for process-critical data and for uncritical
communication. SCALANCE W products distinguish themselves
by the reliability of their radio channel and the rugged type of
construction with high requirements with respect to mechanical
durability for which SIMATIC is known. To protect against
unauthorized access, the products have modern standard
mechanisms for user identification (authentication) and data
encryption, and can at the same time be easily integrated into
existing security concepts.
Wireless infrastructure
Instead of copper cables and fiber-optic cables, wireless transmission techniques use radio waves. The propagation characteristics of the electromagnetic waves can differ considerably
and depend on the spatial environment with the installed wireless infrastructure.
SCALANCE W modules use techniques such as MIMO, highquality receivers, and fault-tolerant modulation procedures to
improve signal quality and to prevent interruption of wireless
communication. Extensions to the IEEE 802.11 standard also
permit reliable, wireless transmission from PROFINET, form the
basis for wireless safety applications and the transmission of
video data with extremely short reply and update data.
Network solution with IWLAN
Mobile end devices, for example, allow a continuous information
flow from the management level down to the production level.
The IE/PB Link PN IO with SCALANCE W client modules
(e.g. W722) is available for wireless-based connection of
PROFIBUS devices.
This means that information can be provided quickly, reliably
and easily at the right place and at the right time by wireless.
Ruggedness and industrial suitability
The SCALANCE W products can be exposed to fluctuations in
the extended temperature range, or to continuous contact with
dust and water. Rugged enclosure and mechanical protection
against shock and vibration allow use in harsh industrial environments.
EEC (Enhanced Environmental Conditions) series devices are
also specially strengthened (coated printed circuit boards resist
condensation, increased temperature range) and can also be
used in railway applications. Accessories such as antennas,
power supply units and cabling are also part of this concept and
are suitable for use in industry.
Power and data are transferred over one cable with Power-overEthernet (PoE), saving investment and maintenance costs.
The C-PLUG (configuration plug) swap medium stores engineering and configuration data, making device replacement possible
in a short time and without specially trained personnel. This
minimizes downtimes and saves training costs.
In addition to the functions of the C-PLUG, the KEY-PLUG
swap medium allows additional features to be enabled on
SCALANCE W78x/W74x and W77x/W73x.
Reliability of data communication
The international standard IEEE 802.11n makes wireless
communication via IWLAN even more robust. The greatest
advantage is the use of multiple path propagation (Multiple
Input, Multiple Output (MIMO)). This allows the devices parallel
use of multiple antennas. A higher data transfer rate is achieved
and susceptibility to interference in environments with a lot of
reflections is reduced.
SCALANCE W products with IWLAN in accordance with
IEEE 802.11n support up to three streams each in both the send
and receive directions.
Siemens IK PI · 2015
6/3
6
© Siemens AG 2014
Industrial Wireless Communication
Industrial Wireless LAN (IWLAN)
Introduction
■ Overview (continued)
Redundant network concepts can also be implemented by
wireless. Wireless channels are designed redundantly for this
purpose, with a failover time of a few milliseconds, so that the
application is not influenced by packet repetitions or interference in the radio channel.
No data rate reservation
IEEE 802.11
Time
Client 1
Client 2
Client 3
Client 4
Client 5
This means that access by
nodes with critical data cannot
be predicted.
In standard WLAN, access by all nodes to the wireless channel
is uncoordinated. This means that access by nodes with critical
data cannot be predicted.
The iPCF function (supported by device types with iFeatures)
permits cyclic data traffic in real time for several PROFINET IO
devices connected by wireless. In addition, this allows mobile
nodes to be transferred quickly from one wireless field to another
(roaming) so that PROFINET IO communication is not interrupted.
Cyclic polling of all nodes within radio coverage
IEEE 802.11
Time
Client 1
Client 2
Client 3
Client 4
Client 5
Client 6
This means that access by all
nodes can be predicted.
6/4
Siemens IK PI · 2015
All nodes may predictably access the
radio channel
G_IK10_XX_30177
6
All nodes access the radio channel
without prioritization.
G_IK10_XX_30178
Client 6
© Siemens AG 2014
Industrial Wireless Communication
Industrial Wireless LAN (IWLAN)
Introduction
■ Overview (continued)
■ Benefits
Increased data rate
WLAN systems in accordance with IEEE 802.11a/b/g/h use a
single channel for sending and receiving data. This achieves a
maximum gross data rate of 54 Mbps.
Two channels are used simultaneously with the help of channel
bonding. Gross data rates of up to 450 Mbps can be achieved
in conjunction with MIMO technology in accordance with
IEEE 802.11n.
Communication according to IEEE 802.11n
SCALANCE
W788-1M12
2x 20 MHz channels
SCALANCE
W748-1 M12
max. data rate: 216,7 Mbit/s
SCALANCE
W788-1 M12
1x 40 MHz channel
SCALANCE
W748-1 M12
G_IK10_XX_30289
Communication according to IEEE 802.11n standard
• High level of investment protection, as all products comply
with the universally recognized IEEE 802.11 standard and are
suitable for 2.4 GHz and 5 GHz
• No wear and tear – saves maintenance and repair costs for
connectors, trailing cables, sliding contacts or winding
devices
• Predictable data traffic (deterministic response) and defined
response times on the wireless link
• Wireless transmission of standard and fail-safe signals with
PROFINET and PROFIsafe
• Low-cost installation in hazardous areas of Zone 2
• End-to-end wireless network for data, voice and video
beyond corporate divisions thanks to interfacing with the
SCALANCE WLC IWLAN controller (support by
SCALANCE W78xC device types)
• Expansion of certain SCALANCE W products with additional
functions is possible using a KEY-PLUG
• KEY-PLUG/C-PLUG permits simple device replacement if an
error occurs
6
max. data rate: 450 Mbit/s
Increased data rate on IWLAN in accordance with IEEE 802.11n
with the help of channel bonding
Siemens IK PI · 2015
6/5
© Siemens AG 2014
Industrial Wireless Communication
Industrial Wireless LAN (IWLAN)
Application examples
■ Overview
Field PG for
diagnostics
Access Point
SCALANCE
W786-1 RJ45
Access Point
SCALANCE
W774-1 RJ45 with
S7-1500 CPU
PROFINET
Microbox 427C
with SINEMA
server netzwork
management
Industrial Ethernet
IWLAN
RCoax Cable
Access Point
SCALANCE
W788-2 M12
Client Module
SCALANCE
W722-1 RJ45
Mobile Panel
IE/PB
Link
PN IO
PROFIBUS
ET 200SP
ET 200SP
6
SINAMICS
Wireless integration of PROFIBUS segments and PROFINET nodes into an existing Industrial Ethernet network
An existing Ethernet network can be expanded by a wireless
network without increased overhead.
This even enables an existing PROFIBUS segment to be connected to an access point.
The wireless link is established to the mobile nodes by connecting a SCALANCE W access point to the Ethernet network.
The mobile stations are connected wirelessly, e.g. via the
SCALANCE W72x Client Module, to which the mobile station is
connected with a cable.
Access to the existing controllers or processes is possible
without much additional wiring.
6/6
Siemens IK PI · 2015
ET 200MP
G_IK10_XX_30336
ET 200SP
Client Module
SCALANCE
W734-1 RJ45
Client Module
SCALANCE
W722-1 RJ45
© Siemens AG 2014
Industrial Wireless Communication
Industrial Wireless LAN (IWLAN)
Application examples
■ Overview (continued)
Office network
Plant network
Seamless roaming between office- and plant networks
WLAN
telephone
S7-300 with
CP 343-1
SCALANCE
WLC711
IWLAN Controller
Enterasys
AP3705
(IEEE
802.11a/b/g)
Smartphone
Industrial Ethernet
Network
management
Enterasys
AP3710i
(IEEE
802.11a/b/g/n)
SCALANCE
W786C-2 RJ45
(IEEE 802.11a/b/g/n)
IP telephone
SCALANCE
W788C
(IEEE 802.11a/b/g/n)
Router
Database
SCALANCE
W748-1 RJ45
Laptop
G_IK10_XX_30175
Ethernet
IP telephone
system
Enterasys Wireless Controller
S7-300 with CP 343-1
Uninterrupted roaming between the office and automation network by using wireless LAN controllers and Industrial Wireless LAN controllers
By using the SCALANCE WLC Industrial Wireless LAN controller
along with controller-based access points, it is possible to establish a single wireless infrastructure for the entire company.
This achieves a high level of flexibility, since mobile nodes
(e.g. laptop, PDA, WLAN telephone) can move anywhere, roaming seamlessly between the office and automation networks.
This allows wireless access to data from any location within the
company. Thanks to the use of a centralized security mechanism
for each user group (Virtual Network Services VNS), the data is
protected against unauthorized access and manipulation.
The SCALANCE W78xC controller-based access points support
the WLAN standards IEEE 802.11a/b/g and 802.11n, and they
are connected via Gigabit Ethernet to the SCALANCE WLC
IWLAN controller.
Operation always requires the SCALANCE WLC711 IWLAN
controller that permits the configuration of access points in
groups. This significantly increases the manageability of an
widespread IWLAN infrastructure. Central management with the
IWLAN controller also permits recording of faults/errors as well
as monitoring and documentation of statistics.
Siemens IK PI · 2015
6/7
6
© Siemens AG 2014
Industrial Wireless Communication
Industrial Wireless LAN (IWLAN)
Application examples
■ Overview (continued)
Wireless solutions with RCoax cable are typically used in the
following applications:
• Crane control
• Overhead monorail conveyors
• Storage and retrieval systems
• Automated guided vehicle systems (AGVS)
S7-1500
PROFINET
Industrial Ethernet
RCoax cable
Segment 1
An example of an application with a suspended monorail is a
nutrunner controller in a car assembly plant.
An RCoax radiating cable is used along the coding rail to establish wireless data transfer between the monorail and the central
controller. It generates a reliable wireless field and is easy to lay.
Access Point
SCALANCE
W788-1 RJ45
Antenna
ANT792-4DN
The RCoax cable is connected as an antenna to a stationary
SCALANCE W788-1 RJ45 access point with KEY-PLUG W780 i
Features. This means that the same mobile unit can be used for
all applications so that a mobile nutrunner can be used for
several clock cycles resulting in lower investment costs.
Client Module
SCALANCE
W734-1 RJ45
Maintenance costs and downtimes are reduced by having
reliable wireless data transmission to mobile communications
partners without any wear and tear.
SCALANCE
X208PRO
Downtimes are reduced because if a fault occurs, devices can
be replaced without a programming device or specialist personnel by using the KEY-PLUG/ C-PLUG swap medium.
Nutrunner
control
6
Hangers
ET 200pro
System solution for nutrunner controls with RCoax cable and
SCALANCE W788-1 RJ45
6/8
Siemens IK PI · 2015
G_IK10_XX_30048
SIMATIC HMI
© Siemens AG 2014
Industrial Wireless Communication
Industrial Wireless LAN (IWLAN)
Application examples
■ Overview (continued)
Internet
Control and
monitoring system
Controller
Safety
Controller
Fail-safe communication
via PROFIsafe profile
SCALANCE
W788-2 RJ45
Security
IPC427C Bundle
with WinAC RTX F
PROFINET
PROFIsafe
Industrial
Ethernet
Switch
IE/PB
Link
PN IO
Distributed l/O
ET200 SP with
SCALANCE W722
Access Point
SCALANCE
W788-1 M12
RCoax Cable
Proxy
HMI
SINAMICS Drives
other field busses
PROFIsafe
DP/AS-i
F-Link
SINAMICS
G120
G_IK10_XX_30118
SINUMERIK
840D sl and
SINAMICS
S120 Drives
Distributed I/O
AS-Interface
Fail-safe communication with PROFIsafe – via PROFIBUS, PROFINET and even by wireless via Industrial Wireless LAN
IWLAN radio link
Access Point
SCALANCE
W786-2IA RJ45
Access Point
SCALANCE
W786-2IA RJ45
Mobile Panel 277F IWLAN
Effective range 1
Effective range 2
Effective range 3
Transponder
Transponder
Transponder
S7-1500 F
PROFINET
ET 200pro
Robots
Robot cell 1
ET 200pro
Robots
Robot cell 2
ET 200pro
Robots
Robot cell 3
G_IK10_XX_30216
SCALANCE
X208
Industrial
Ethernet
PROFIsafe
Operation of robots in a safety-related environment
For several years, safety technology has been integrated in
standard automation on the basis of SIMATIC S7 controllers,
PROFIBUS and PROFIsafe.
This range has been expanded by PROFINET-compliant
components, providing a complete product range with fail-safe
controllers, fail-safe I/O and a corresponding engineering
environment.
PROFIsafe prevents errors such as address corruption, loss,
delay, etc. when transmitting messages through continuous
numbering of the PROFIsafe data, time monitoring, and authenticity monitoring using passwords and optimized CRC backup.
This means that fail-safe communication is also supported via
Industrial Wireless LAN.
Siemens IK PI · 2015
6/9
6
© Siemens AG 2014
Industrial Wireless Communication
Industrial Wireless LAN (IWLAN)
Overview of network components
■ Overview
Client Modules
Access Points
SCALANCE
W720
W730
W740
W760
W770
W780
For outdoor
use
*
For indoor use
Industrial
Wireless LAN
Controller
6
SCALANCE WLC711
* also configurable as a client module
SCALANCE W access points, controller access points and clients
and IWLAN controllers
6/10
Siemens IK PI · 2015
G_IK10_XX_30311
For use in
control cabinet
© Siemens AG 2014
Industrial Wireless Communication
Industrial Wireless LAN (IWLAN)
Overview of network components
65
SCALANCE
W788-2 M12
3x3
●
2
6
1
M12
●
●
●
-20 +60
65
SCALANCE
W788-2 M12 EEC 3x3
●
2
6
1
M12
●
●
●
-40 +70
65
SCALANCE
W788-1 RJ45
3x3
●
1
3
1
RJ45
●
●
●
●
●
-20 +60
30
SCALANCE
W788-2 RJ45
3x3
●
2
6
1
RJ45
●
●
●
●
●
-20 +60
30
SCALANCE
W786-1 RJ45
3x3
●
1
3
1
RJ45
●
●
●
-40 +60
65
●
●
●
●
●
SCALANCE
W786-2 RJ45
3x3
●
2
6
1
RJ45
●
●
●
-40 +60
65
●
●
●
●
●
SCALANCE
W786-2IA RJ45
3x3
●
2
1
RJ45
●
●
●
-40 +60
65
●
●
●
●
●
SCALANCE
W786-2 SFP
3x3
●
2
6
2
SFP
●
-40 +60
65
●
●
●
●
●
SCALANCE
W774-1 RJ45
2x2
●
1
2
2
RJ45
●
●
●
-20 +60
30
SCALANCE
W774-1 M12 EEC 2x2
●
1
2
2
M12
●
●
●
-20 +60
30
SCALANCE
W761-1 RJ45
1x1
●
1
1
1
RJ45
SCALANCE
W788C-2 RJ45
3x3
●
2
6
1
RJ45
●
SCALANCE
W788C-2 M12
3x3
●
2
6
1
M12
SCALANCE
W788C-2 M12
EEC
3x3
●
2
1
SCALANCE
W786C-2 RJ45
3x3
●
2
SCALANCE
W786C-2IA RJ45
3x3
●
2
SCALANCE
W786C-2 SFP
3x3
●
2
● suitable
6
6
6
6
0
●
6
●
+55
20
●
-20 +60
30
●
●
●
●
-20 +60
65
●
●
M12
●
●
-40 +70
65
1
RJ45
●
●
-40 +60
65
●
●
●
●
●
1
RJ45
●
●
-40 +60
65
●
●
●
●
●
2
SFP
-40 +60
65
●
●
●
●
●
●
●
G_IK10_XX_30280
6
IWLAN client operation possible
-20 +60
Operation with Entereasy WLAN controller
IP protection class
●
For use in Ex zone 2 1)
Maximum operating temperature (°C)
●
For use in Ex zone 2 without housing
Slot for removable storage (PLUG)
●
UV-resistant
Redundant power supply
M12
Resistant against salt spray
PoE (Power-over-Ethernet)
IEEE 802.3at Type 1 (previously 802.3af)
1
Resistant to condensation
Type of LAN ports
3
Minimum operating temperature (°C)
Quantity of LAN ports
1
Digital Output
Connections for external antennas (N-Connect)
●
Digital Input
Number of radio interfaces
3x3
Connections for external antennas (R-SMA)
IEEE 802.11a/ b/ g/ h
SCALANCE
W788-1 M12
Internal antennas
IEEE 802.11n MIMO (Input x Output Streams)
■ Overview (continued)
1) please follow installation instructions
Function overview of SCALANCE W access points according to the IEEE 802.11n standard
Siemens IK PI · 2015
6/11
6/12
3x3
●
1
SCALANCE
W734-1 RJ45
2x2
●
SCALANCE
W722-1 RJ45
1x1
SCALANCE
W721-1 RJ45
1x1
● suitable
Siemens IK PI · 2015
3
1
M12
●
●
●
3
1
RJ45
●
●
●
1
2
2
RJ45
●
●
●
●
1
1
1
●
1
1
1
IP protection class
For use in Ex zone 2
Number of connectable devices
+60
65
●
8
-20
+60
30
●
8
-20
+60
30
●
8
RJ4
+55
20
●
4
RJ4
+55
20
●
4
1) please follow installation instructions
Function overview of SCALANCE W client modules according to the IEEE 802.11n standard
●
●
G_IK10_XX_30281
Maximum operating temperature (°C)
-20
Digital output
Digital input
Minimum operating temperature (°C)
Connections for external antennas (R-SMA)
Slot for removable storage (PLUG)
SCALANCE
W748-1 RJ45
Redundant power supply
1
PoE (Power-over-Ethernet)
IEEE 802.3at Type 1 (previously 802.3af)
●
Type of LAN ports
3x3
Quantity of LAN ports
Number of radio interfaces
SCALANCE
W748-1 M12
Connections for external antennas (N-Connect)
IEEE 802.11a/ b/ g/ h
6
IEEE 802.11n MIMO (Input x Output Streams)
© Siemens AG 2014
Industrial Wireless Communication
Industrial Wireless LAN (IWLAN)
Overview of network components
■ Overview (continued)
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Access Points IEEE 802.11n
Overview
■ Overview
The access points of the SCALANCE W700 product lines are
ideally suited for setting up Industrial Wireless LANs (IWLAN) for
2.4 GHz or 5 GHz. They can be used in all applications that require a high degree of operational reliability, even in extremely
harsh surroundings.
• High data rates (up to 450 Mbit/s in connection with Channel
Bonding) as per IEEE802.11n
• Reliable wireless link by using of MIMO technology (Multiple
Input, Multiple Output). For this, SCALANCE W access points
use up to three streams for simultaneous sending and
receiving.
• SCALANCE W700 Access Points are suitable for any application: for outdoors with high requirements regarding
climactic conditions, for installing without a control cabinet
indoors, for installing in the control cabinet, and for an
extended range of environmental conditions.
• Reliable thanks to a rugged, impact-resistant enclosure,
protected from water and dust (up to IP65), resistant to shock,
vibration and electromagnetic fields, resistant to condensation
thanks to the use of coated PCBs
• Demanding applications with real-time and redundancy
requirements, such as PROFINET with PROFIsafe
• Conformant to standards through supporting IEEE802.11;
expanded software functions especially for use where
increased reliability is required, e.g. cyclic real-time data
traffic and very high-speed roaming (iPCF, iPCF-MC)
• Configuration support by means of wizards and online help;
easy management via Web server and SNMP
• Configuration and diagnostics using Web based
Management, Command Line Interface, and SNMP. Devices
and networks can be configured using STEP 7 (TIA Portal). For
cyclic monitoring, diagnostics and documentation (reporting)
in network mode, the SINEMA Server software is recommended.
• Enabling of further functions using the KEY-PLUG swap
medium (iPCF, iPCF-MC, iREF)
• Fast replacement of devices if a fault occurs thanks to use of
optional KEY-PLUG/C-PLUG (Configuration Plug) swap
medium
■ Benefits
• Predictable data traffic (deterministic response) and defined
response times on the wireless link
• Reliable wireless link, e.g. by using MIMO technology and
monitoring the wireless link
• Cost savings by having only one wireless network both for
process-critical data and for non-critical communication
• Future-proof because all products are compatible with the
internationally recognized WLAN standard IEEE 802.11n,
suitable for license-free 2.4 GHz and 5 GHz frequency bands
(ISM bands)
• Implementation of data-intensive applications such as video
streaming
• Reduced operating costs, because there is no wear and tear
on rotating and moving plant sections
• Cost-effective connection to devices which are remote,
difficult to access or installed in hostile environments
• Investment protection because flexible feature expansions
(iFeatures) are possible by using the KEY-PLUG
■ Application
The access points of the SCALANCE W700 product line are designed for both industrial use and for demanding climatic requirements outdoors. Versions for the inexpensive integration in
cabinets or in machines are also available. They provide a reliable wireless link, redundancy mechanisms, and fast handover
of nodes from one access point to the next (roaming). This allows
processes to be monitored and loss of production due to machine downtimes to be avoided.
Industrial Wireless LAN (IWLAN) can also be used in time-critical
applications in factory automation (PROFINET IO) or for safetyrelated signals (PROFIsafe).
Due to their high degree of protection (up to IP65) and extended
temperature range from -40 °C to +70 °C, the access points are
ideally suited for use outdoors. SCALANCE W products are silicone-free and can therefore also be used in paint shops.
When using the RCoax cable (radiating cable), operation is particularly reliable in conveyor systems and all track applications
(e.g. storage and retrieval systems, suspended monorail).
Siemens IK PI · 2015
6/13
6
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Access Points IEEE 802.11n
Overview
■ Application (continued)
6
Application examples:
• Automated guided vehicle systems and suspended
monorails;
prevents wear and offers high flexibility for traffic routing
thanks to the wireless transfer of data to the vehicles. It is also
possible to transfer PROFIsafe via IWLAN.
• Cranes;
high flexibility due to access to data communication with the
moving unit independent of the location
• Mobile control console;
reliable intervention in the process thanks to data communication over IWLAN with mobile units (e.g. Mobile Panel 277(F)
IWLAN); the number of operator panels is therefore determined by the number of personnel and no longer by the
number of control desks.
• Wireless access to field devices for configuration and testing
• Passenger transportation systems;
transmission in passenger information systems, e.g. highquality video streams between the control center and buses or
trains
• Tunnel application;
reliable wireless link since the devices can handle multiple
path propagation better by using the MIMO technology.
• Communication with moving stations (e.g. mobile controls and
devices), container logistics, storage and retrieval machines,
conveyor systems, conveyor belts, rotating machines, trucks
• Wireless coupling of communication segments and bridging
of large distances for fast commissioning and cost-effective
networks in applications where cable routing would be
extremely expensive (e.g. on public roads, rivers, lakes, train
lines)
• Localization of personnel and machines using WLAN tags and
localization software from AeroScout
■ Function
A simple RF field can be established with a single access point
(infrastructure mode). The access point provides at least one
Industrial Ethernet interface for connection to the wired network.
Nodes, such as mobile controllers or a Field PG can move freely
within the RF field and exchange data with other nodes via this
access point.
If the RF field of a single access point (wireless cell) is insufficient, it can be expanded by further access points. The individual wireless cells must overlap so that moving nodes can be
handed over seamlessly from one access point to the next
(roaming). This is transparent for the application. The access
points must be able to exchange data via Industrial Ethernet or
a Wireless Distribution System (WDS).
If the access points are not connected to Industrial Ethernet using a wired connection (e.g. no cable tray available for a data
line), the "Wireless Distribution System" mode must be selected.
An access point from the SCALANCE W700 product line can
communicate via WDS with several other access points that are
not connected to the data network by a direct wired connection.
Remote directional antennas can be used to achieve ranges of
several thousand meters outdoors.
Apart from a reliable radio link, the SCALANCE W700 Access
Points are characterized by their support of IT mechanisms:
• IEEE 802.11a/b/g/n for different frequency ranges
• IEEE 802.11e for Wireless Multimedia (WMM)
• IEEE 802.11i for security
• Construction of redundant networks with the Spanning Tree
Protocols (RSTP, MSTP)
• Virtual networks (VLAN) for example to logically separate
different user groups
• Sending the log entries of the SCALANCE W devices to a
Syslog server
• Modern security mechanisms (e.g. network security such as
IEEE 802.1x, RADIUS, EAP mechanisms)
Security
A high degree of data security is achieved by means of the
WPA2/IEEE 802.11i mechanisms. These define modern procedures that control a regular exchange of the complete 128-bit
key as well as performing the access check (authentication) of
a node. The Advanced Encryption Standard (AES) is available
for data encryption.
On top of this, access to the devices (HTTPS) is encrypted and
a secure logon (SSH) is possible. If a security concept in combination with SCALANCE S is required, the security requirements
can be increased using Virtual Private Networks (VPN).
6/14
Siemens IK PI · 2015
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Access Points IEEE 802.11n
Overview
■ Function (continued)
iFeatures (only in conjunction with KEY-PLUG)
iPCF (industrial Point Coordination Function):
The iPCF mode is a good choice for applications with requirements for real-time and predictable response times (deterministic response), even when mobile nodes are roaming from one
access point to the next. This ensures that wireless PROFINET
IO is supported and that safety-related signals, e.g. emergency
stop, can be linked into the RF field. This means that even video
signals from mobile nodes can be transmitted with a high level
of quality. The iPCF mechanism expands the IEEE 802.11
standard and must be available on both the client module
and the access point. In an RF field in which iPCF is used, no
IEEE 802.11-compliant nodes can be operated.
iPCF is recommended for applications where wireless network
nodes move along predefined paths (e.g. suspended monorail).
RCoax radiating cables or directional antennas must be used for
this purpose.
iPCF-MC (iPCF Management Channel)1):
iPCF-MC is available as a further development of iPCF.
This mode should be used if IWLAN stations that also support
iPCF-MC move freely about in the coverage area (especially
when using omni-directional antennas) and are to exchange
data deterministically. This functionality can only be achieved in
connection with access points with two wireless interfaces and
the KEY PLUG.
iREF (industrial Range Extension Function):
The range of an individual access point is very important, e.g. for
path-based applications. Using iREF, it is now possible to align
the various antennas of a wireless interface in different directions. This allows a longer path or a greater area to be covered
using a single access point, which reduces the number of
channels used and the number of access points.
Note:
These iFeatures cannot be used in parallel.
Diagnostics and management
• Web-based (HTTP/HTTPS) management tool for configuration
and diagnostics using a standard browser
• LEDs for signaling operating status and fault/error states
• Signaling of faults by means of SNMP trap or e-mail to a
network management tool
• Configuration and diagnostics using Web based
Management, Command Line Interface, and SNMP. Devices
and networks can be configured using STEP 7 (TIA Portal). For
cyclic monitoring, diagnostics and documentation (reporting)
in network mode, the SINEMA Server software is recommended.
1)
Available soon
Access Point
SCALANCE
W784-1RR in
the cabinet
Client Module
SCALANCE
W722-1 RJ45
Panel PC
WinAC
IWLAN RCoax Cable
6
RCoax Cable Segment 2
Client Module
SCALANCE
W722-1 RJ45
Panel PC
WinAC
Client Module
SCALANCE
W722-1 RJ45
Access Point
SCALANCE
W784-1RR in
the cabinet
Panel PC
WinAC
IWLAN RCoax Cable
G_IK10_XX_30172
RCoax Cable Segment 1
Linking in an automated guided vehicle system using iPCF with the SCALANCE W774-1 RJ45 and KEY-PLUG
Siemens IK PI · 2015
6/15
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Access Points IEEE 802.11n
SCALANCE W788 RJ45 for use in control cabinet
■ Overview
■ Design
• Suitable for applications where the access point is to be
mounted in the control cabinet
• Rugged aluminum enclosure, shock and vibration-proof,
for high mechanical requirements
• Dust protection with IP30 degree of protection
• For use at ambient temperatures from -20 °C to +60 °C
• 3 x R-SMA sockets for the connection of directly mountable
and remote antennas (6 x R-SMA sockets for the variants with
two wireless modules)
• Antenna placement optimized for the 3x3 MIMO technology;
the antennas do not interfere with each other when they are
mounted directly on the device
• Suitable for 2.4 GHz and 5 GHz
• 1 x RJ45 connector for 10/100/1 000 Mbit/s with Power-overEthernet according to IEEE 802.3at
• 2 x 24 V DC connection for redundant energy supply
• 1 x PLUG compartment for KEY-PLUG/C-PLUG
• Function LEDs for optical signaling of faults/errors and
operating statuses
• Digital input for feeding in a signal from a sensor, for example,
to an SNMP-based network management system
• Digital output for converting a command received over SNMP
into a signal and switching a hardware function
• Mounting: Wall, S7-1500 mounting rail, S7-300 mounting rail,
or on 35 mm standard mounting rail
6
3x R-SMA
(female)
antenna
connections
PLUG slot
Terminal block for
digital input/output
24 V DC
connection
RJ45 connection
(Gigabit)
n†prXW††ZWY]Z
3x R-SMA (female) antenna connections
Design and interfaces of the SCALANCE W788-2 RJ45 access points
Product versions
SCALANCE W788-1 RJ45
• A radio card is permanently installed; functional scope can be
expanded by using a KEY-PLUG W780 iFeatures
SCALANCE W788-2 RJ45
• Two radio cards are permanently installed; functional scope
can be expanded by using a KEY-PLUG W780 iFeatures
6/16
Siemens IK PI · 2015
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Access Points IEEE 802.11n
SCALANCE W788 RJ45 for use in control cabinet
■ Function
SCALANCE W788 RJ45 access points can also be operated as
client modules. As an alternative, the SCALANCE W748 RJ45
client modules can be used for this mode.
In conjunction with the SCALANCE W748 RJ45 client modules
with degree of protection IP30, an infrastructure can be set up in
which extreme temperature differences and protection against
dust and water tend to be less important.
Access Point
SCALANCE
W784-1RR in
the cabinet
RCoax Cable Segment 2
Client Module
SCALANCE
W748-1 RJ45
Panel PC
IWLAN RCoax Cable
Client Module
SCALANCE
W748-1 RJ45
Panel PC
Client Module
SCALANCE
W748-1 RJ45
Access Point
SCALANCE
W784-1RR in
the cabinet
Panel PC
IWLAN RCoax Cable
G_IK10_XX_30351
RCoax Cable Segment 1
Linking in an automated guided vehicle system using iPCF with the SCALANCE W788-1 RJ45 and KEY-PLUG.
The mobile automated guided vehicles are linked into the IWLAN RF field via the SCALANCE W748-1 RJ45 Ethernet client modules with KEY-PLUG.
Both the access points and the client modules are in the control cabinet.
Siemens IK PI · 2015
6/17
6
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Access Points IEEE 802.11n
SCALANCE W788 RJ45 for use in control cabinet
■ Technical specifications
Article No.
6GK5788-1FC00-0AA0
6GK5788-1FC00-0AB01)
6GK5788-2FC00-0AA0
6GK5788-2FC00-0AB01)
Product-type designation
SCALANCE W788-1 RJ45
SCALANCE W788-2 RJ45
450 Mbit/s
10 … 1 000 Mbit/s
-
450 Mbit/s
10 … 1 000 Mbit/s
-
1
1
1
1
1
1
RJ45 socket
RJ45 socket
Transmission rate
Transmission rate
• with W-LAN maximum
• with Industrial Ethernet
• note
Interfaces
Number of electrical connections
• for network components and
terminal equipment
• for power supply
• for redundant power supply
Design of electrical connection
• for network components and
terminal equipment
• for power supply
4-pole screw terminal, PoE
4-pole screw terminal, PoE
Number of optical interfaces
for optical waveguide at 100 Mbit/s
-
-
Design of optical interface
for optical waveguide at 100 Mbit/s
-
-
design of the removable storage
C-PLUG
Yes
Yes
Number of radio cards permanently
installed
1
2
Number of internal antennas
-
-
Number of electrical connections
for external antenna(s)
3
6
Design of the electrical connection
for external antenna(s)
R-SMA (socket)
R-SMA (socket)
Product property external antenna
can be mounted directly on device
Yes
Yes
Number of digital inputs
1
1
Number of digital outputs
1
1
Design of electrical connection
at the digital inputs/outputs
4-pole screw terminal
4-pole screw terminal
24 V DC, safety extra-low voltage
24 V DC /1 A
24 V DC, safety extra-low voltage
24 V DC /1 A
Interfaces wireless
6
Signal-Inputs/outputs
Signal range
• at digital input
• at the digital output
1)
Wireless approval in the USA
6/18
Siemens IK PI · 2015
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Access Points IEEE 802.11n
SCALANCE W788 RJ45 for use in control cabinet
■ Technical specifications (continued)
Article No.
6GK5788-1FC00-0AA0
6GK5788-1FC00-0AB01)
6GK5788-2FC00-0AA0
6GK5788-2FC00-0AB01)
Product-type designation
SCALANCE W788-1 RJ45
SCALANCE W788-2 RJ45
DC
DC
19.2 V
28.8 V
48 V
19.2 V
28.8 V
48 V
50 V
50 V
Supply voltage,
current consumption, power loss
Type of supply voltage
Supply voltage
• 1 from terminal block
• 2 from terminal block
• from Power-over-Ethernet
according IEEE802.3at for type 1
and IEEE802.3af
• from Power-over-Ethernet
according IEEE802.3at for type 2
Current consumed
• at 24 V with DC typical
0.45 A
0.22 A
• with Power-over-Ethernet
according to IEEE802.3at for type 1
and IEEE802.3af typical
• with Power-over-Ethernet
according to IEEE802.3at
for type 2 typical
Effective power loss
• at 24V for DC typical
10.7 W
• with Power-over-Ethernet
according to IEEE802.3at for type 1
and IEEE802.3af typical
• with Power-over-Ethernet
according to IEEE802.3at
for type 2 typical
0.63 A
0.22 A
0.3 A
15 W
10.7 W
15 W
6
Permitted ambient conditions
Ambient temperature
• during operating
• during storage
• during transport
-20 … +60 °C
-40 … +70 °C
-40 … +70 °C
-20 … +60 °C
-40 … +70 °C
-40 … +70 °C
Relative humidity at 25 °C without
condensation during operating
maximum
90 %
90 %
Protection class IP
IP30
IP30
Ambient condition for (standard)
operation mode
When used under hazardous conditions (Zone 2),
the SCALANCE W788-xPRO/RR or W74x-1PRO/RR product
must be installed in an enclosure. To comply with
EN 50021, this enclosure must meet the requirements of
at least IP 54 in compliance with EN 60529.
When used under hazardous conditions (Zone 2),
the SCALANCE W788-xPRO/RR or W74x-1PRO/RR product
must be installed in an enclosure. To comply with
EN 50021, this enclosure must meet the requirements of
at least IP 54 in compliance with EN 60529.
Width of enclosure without antenna
200 mm
200 mm
Height of enclosure without antenna
158 mm
158 mm
Depth of enclosure without antenna
79 mm
79 mm
Net weight
1.7 kg
1.7 kg
Mounting type wall mounting
Yes
Yes
2.41 … 2.48 GHz
2.41 … 2.48 GHz
4.9 … 5.8 GHz
4.9 … 5.8 GHz
Design, dimensions and weight
Wireless frequencies
Radio frequency
• for WLAN in 2.4 GHz
frequency band
• for WLAN in 5 GHz
frequency band
1)
Wireless approval in the USA
Siemens IK PI · 2015
6/19
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Access Points IEEE 802.11n
SCALANCE W788 RJ45 for use in control cabinet
■ Technical specifications (continued)
Article No.
6GK5788-1FC00-0AA0
6GK5788-1FC00-0AB01)
6GK5788-2FC00-0AA0
6GK5788-2FC00-0AB01)
Product-type designation
SCALANCE W788-1 RJ45
SCALANCE W788-2 RJ45
Product function
• Access Point Mode
• Client Mode
Yes
Yes
Yes
Yes
Number of SSIDs
8
16
Product function
• iPCF Access Point
• iPCF client
• iPCF-MC Access Point
• iPCF-MC client
Yes
Yes
in preparation
in preparation
Yes
Yes
in preparation
in preparation
1
2
Number of manageable IP addresses 8
in client
8
Product properties, functions,
components general
Number of iPCF-capable radio
modules
Product functions management,
configuration
6
Product function
• CLI
• web-based management
• MIB support
• TRAPs via email
• Configuration with STEP 7
• configuration with STEP 7
in the TIA Portal
• operation with IWLAN controller
• operation with Enterasys WLAN
controller
• forced roaming with IWLAN
• WDS
Yes
Yes
Yes
Yes
in preparation
in preparation
Yes
Yes
Yes
Yes
in preparation
in preparation
No
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Identification & maintenance function
• I&M0 - device-specific information Yes
• I&M1 – higher level designation/
Yes
location designation
Yes
Yes
Protocol is supported
• Address Resolution Protocol (ARP)
• ICMP
• Telnet
• HTTP
• HTTPS
• TFTP
• SNMP v1
• SNMP v2
• SNMP v3
• DCP
• LLDP
Product functions Diagnosis
Product function
• PROFINET IO diagnosis
• localization via Aeroscout
• SysLog
in preparation
in preparation
Yes
in preparation
in preparation
Yes
Yes
Yes
Product function
• DHCP client
Yes
• in Client Mode DHCP server via LAN No
Yes
No
Product functions VLAN
Product function function VLAN
with IWLAN
Product functions DHCP
1)
Wireless approval in the USA
6/20
Siemens IK PI · 2015
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Access Points IEEE 802.11n
SCALANCE W788 RJ45 for use in control cabinet
■ Technical specifications (continued)
Article No.
6GK5788-1FC00-0AA0
6GK5788-1FC00-0AB01)
6GK5788-2FC00-0AA0
6GK5788-2FC00-0AB01)
Product-type designation
SCALANCE W788-1 RJ45
SCALANCE W788-2 RJ45
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
EN 60079-15:2005, EN 60079-0:2006,
II 3 G Ex nA II T4 KEMA 07 ATEX 0145X
UL 60950-1 CSA C22.2 No. 60950-1
EN 60079-15:2005, EN 60079-0:2006,
II 3 G Ex nA II T4 KEMA 07 ATEX 0145X
UL 60950-1 CSA C22.2 No. 60950-1
Yes
Yes
Yes
No
No
Yes
Yes
Yes
No
No
No
No
No
Yes
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
You will find the current list of countries at:
www.siemens.com/wireless-approvals
You will find the current list of countries at:
www.siemens.com/wireless-approvals
Product functions Redundancy
Protocol is supported STP/RSTP
Product functions Security
Product function
• ACL - MAC-based
• Management security,
ACL-IP based
• IEEE 802.1x (radius)
• NAT/NAPT
• access protection
according to IEEE802.11i
• WPA/WPA2
• TKIP/AES
Protocol is supported SSH
Product functions Time
Protocol is supported
• SNTP
• SIMATIC Time
Standards, specifications,
approvals
Standard
• for hazardous zone
• for safety of CSA and UL
Verification of suitability
• CE mark
• EC declaration of conformity
• C-Tick
• CCC
• Railway application
in accordance with EN 50155
• e1 approval
• E1 approval
• NEMA4X
• Power-over-Ethernet
according IEEE802.3at for type 1
and IEEE802.3af
• Power-over-Ethernet
according to IEEE802.3at for type 2
Standard for wireless communication
• IEEE 802.11a
• IEEE 802.11b
• IEEE 802.11e
• IEEE 802.11g
• IEEE 802.11h
• IEEE 802.11i
• IEEE 802.11n
Wireless approval
6
Accessories
Accessories
1)
24 V DC screw terminal and screw terminal for digital input 24 V DC screw terminal and screw terminal for digital input
and output included in the scope of delivery
and output included in the scope of delivery
Wireless approval in the USA
Siemens IK PI · 2015
6/21
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Access Points IEEE 802.11n
SCALANCE W788 RJ45 for use in control cabinet
■ Ordering data
Article No.
Article No.
SCALANCE W788 RJ45 access points
Accessories
IWLAN access points with
built-in wireless interfaces; wireless
networks IEEE 802.11a/b/g/h/n
at 2.4/5 GHz up to 450 Mbps;
WPA2/AES; Power over Ethernet
(PoE), IP30 degree of protection
(-20 °C to +60 °C);
scope of supply:
Mounting hardware,
4-pin screw terminal for 24 V DC;
4-pin screw terminal
for digital input and output;
manual on CD-ROM;
German/English
KEY-PLUG W780 iFeatures
C-PLUG
DIN rail mounting adapter
6GK5788-1FC00-0AA0
6GK5788-1FC00-0AB0
SCALANCE W788-2 RJ45
IWLAN dual access point with two
integrated wireless interfaces
• National approvals for operation
outside the USA
• National approvals for operation
within the USA1)
6GK1900-0AB00
Swap medium for simple replacement of devices in the event of a
fault; for storing configuration data;
can be used in SIMATIC NET
products with PLUG compartment
SCALANCE W788-1 RJ45
IWLAN access point with one
integrated wireless interface
• National approvals for operation
outside the USA
• National approvals for operation
within the USA1)
6GK5907-8PA00
Swap medium for enabling
additional iFeatures, for simple
device replacement if a fault occurs
and for storage of configuration
data;
Can be used in SCALANCE W
access points with PLUG compartment
6GK5798-8ML00-0AB3
DIN rail mounting adapter for
SCALANCE W788 M12 and
SCALANCE W788 RJ45;
screw fixing for mounting on a
35 mm DIN rail to EN 50 022;
scope of supply: 3 units per pack
IE FC RJ45 Plug 4 x 2
6GK5788-2FC00-0AA0
6GK5788-2FC00-0AB0
6
RJ45 plug-in connector for Industrial Ethernet (10/100/1 000 Mbps)
with a rugged metal enclosure and
integrated insulation displacement
contacts for connecting Industrial
Ethernet FC installation cables;
180° cable outlet;
for network components and
CPs/CPUs with Industrial Ethernet
interface
• 1 pack = 1 unit
• 1 pack = 10 units
• 1 pack = 50 units
6GK1901-1BB11-2AA0
6GK1901-1BB11-2AB0
6GK1901-1BB11-2AE0
IE FC Standard Cable GP 4x2
6XV1878-2A
8-core, shielded TP installation
cable for connection to IE FC RJ45
Plug 4x2 and IE M12 Plug PRO 4x2;
PROFINET-compliant;
with UL approval;
sold by the meter;
max. length 1 000 m,
minimum order 20 m
IE FC Stripping Tool
6GK1901-1GA00
Preadjusted stripping tool
for fast stripping of Industrial
Ethernet FC cables
Antennas and miscellaneous
IWLAN accessories
1)
See Industrial Wireless LAN/
accessories
Please note national approvals under
http://www.siemens.com/wireless-approvals
■ More information
Selection tools:
Wireless approvals:
To assist in selecting Industrial Ethernet components, the TIA
Selection Tool is available at:
http://www.siemens.com/tia-selection-tool
Current approvals can be found on the Internet at:
http://www.siemens.com/wireless-approvals
6/22
Siemens IK PI · 2015
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Access Points IEEE 802.11n
SCALANCE W788 M12 for indoor use
• Particularly suitable for industrial applications without
control cabinets
■ Design
• Rugged aluminum enclosure, shock and vibration-proof,
for high mechanical requirements
• High IP65 degree of protection against dust and water jets
• For use at ambient temperatures from -20 °C to +60 °C
• 3 x N-Connect sockets for the connection of directly
mountable and remote antennas (6 x N-Connect sockets for
the variants with two wireless modules)
• Antenna placement optimized for the 3x3 MIMO technology;
the antennas do not interfere with each other when they are
mounted directly on the device
• Suitable for 2.4 GHz and 5 GHz
• 1 x M12 connection for 10/100/1 000 Mbit/s with Power-overEthernet according to IEEE 802.3at
• 1 x M12 socket for power supply (24 V DC)
• 1 x PLUG compartment (KEY-PLUG/C-PLUG)
• Function LEDs for optical signaling of faults/errors and
operating statuses
• Mounting: Wall, S7-1500 mounting rail, S7-300 mounting rail,
or on 35 mm standard mounting rail
3x N-Connect (female) connections for antennas
6
3x N-Connect
(female)
connections
for antennas
PLUG slot
24 V DC
connection
M12 connection
(Gigabit)
n†prXW††ZWY][
■ Overview
Design and interfaces of the SCALANCE W788-2 M12 access points
Product versions
SCALANCE W788-1 M12
• A radio card is permanently installed; functional scope can be
expanded by using a KEY-PLUG W780 iFeatures
SCALANCE W788-2 M12
• Two radio cards are permanently installed; functional scope
can be expanded by using a KEY-PLUG W780 iFeatures
Siemens IK PI · 2015
6/23
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Access Points IEEE 802.11n
SCALANCE W788 M12 for indoor use
■ Function
The devices can be installed at the location that is most favorable for the wireless link. The enclosure and the connectors are
resistant to high levels of shock and vibration because all the
connectors are screwed. SCALANCE W788 M12 with degree of
protection IP65 are ideally suited for environments with widely
varying temperatures and where protection against dust and
water play an important role. To achieve optimal coverage for
special applications, the complete range of SCALANCE W
antennas is available.
SCALANCE W788-2 M12 access points can also be operated as
client modules. As an alternative, the SCALANCE W748-1 M12
client modules also available with degree of protection IP65 for
this mode.
S7-400
Radio cell 1
Radio cell 2
Industrial Ethernet
Field PG/
Notebook
Access Point
SCALANCE
W788-2 M12
Client Module
SCALANCE
W748-1 M12
PC
SIMATIC HMI
SCALANCE
X208
S7-300
Client Module
SCALANCE
W748-1 M12
SIMATIC HMI
PC
SCALANCE
X208
S7-300
PC
SCALANCE
X208
SIMATIC HMI
S7-300
Automated Guided Vehicle System (AGVS)
Roaming devices (e.g. Field PG and mobile controller) in a wireless network with two access points
6/24
Siemens IK PI · 2015
SIMATIC HMI
G_IK10_XX_30282
6
Client Module
SCALANCE
W748-1 M12
Access Point
SCALANCE
W788-2 M12
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Access Points IEEE 802.11n
SCALANCE W788 M12 for indoor use
■ Technical specifications
Article No.
6GK5788-1GD00-0AA0
6GK5788-1GD00-0AB01)
6GK5788-2GD00-0AA0
6GK5788-2GD00-0AB01)
Product-type designation
SCALANCE W788-1 M12
SCALANCE W788-2 M12
450 Mbit/s
10 … 1 000 Mbit/s
-
450 Mbit/s
10 … 1 000 Mbit/s
-
1
1
1
1
1
1
M12 interface (8-pole, A-coded)
M12 interface (8-pole, A-coded)
Transmission rate
Transmission rate
• with W-LAN maximum
• with Industrial Ethernet
• note
Interfaces
Number of electrical connections
• for network components
and terminal equipment
• for power supply
• for redundant power supply
Design of electrical connection
• for network components
and terminal equipment
• for power supply
M12 interface (4-pole, A-coded)
M12 interface (4-pole, A-coded)
Number of optical interfaces
for optical waveguide at 100 Mbit/s
-
-
Design of optical interface
for optical waveguide at 100 Mbit/s
-
-
design of the removable storage
C-PLUG
Yes
Yes
Number of radio cards permanently
installed
1
2
Number of internal antennas
-
-
Number of electrical connections
for external antenna(s)
3
6
Design of the electrical connection
for external antenna(s)
N-Connect (socket)
N-Connect (socket)
Product property external antenna
can be mounted directly on device
Yes
Yes
DC
DC
19.2 V
19.2 V
28.8 V
28.8 V
48 V
48 V
50 V
50 V
Interfaces wireless
6
Supply voltage,
current consumption, power loss
Type of supply voltage
Supply voltage
• 1 from M12 Power Connector
(A-coded) for redundant power
supply
• 2 from M12 Power Connector
(A-coded) for redundant power
supply
• from Power-over-Ethernet
according IEEE802.3at for type 1
and IEEE802.3af
• from Power-over-Ethernet
according IEEE802.3at for type 2
Current consumed
• at 24 V with DC typical
0.45 A
• with Power-over-Ethernet
0.22 A
according to IEEE802.3at for type 1
and IEEE802.3af typical
• with Power-over-Ethernet
according to IEEE802.3at
for type 2 typical
Effective power loss
• at 24V for DC typical
• with Power-over-Ethernet
according to IEEE802.3at
for type 1 and IEEE802.3af typical
• with Power-over-Ethernet
according to IEEE802.3at
for type 2 typical
1)
0.63 A
0.22 A
0.3 A
10.7 W
-
15 W
10.7 W
-
15 W
Wireless approval in the USA
Siemens IK PI · 2015
6/25
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Access Points IEEE 802.11n
SCALANCE W788 M12 for indoor use
■ Technical specifications (continued)
Article No.
6GK5788-1GD00-0AA0
6GK5788-1GD00-0AB01)
6GK5788-2GD00-0AA0
6GK5788-2GD00-0AB01)
Product-type designation
SCALANCE W788-1 M12
SCALANCE W788-2 M12
-20 … +60 °C
-40 … +70 °C
-40 … +70 °C
-20 … +60 °C
-40 … +70 °C
-40 … +70 °C
Relative humidity at 25 °C without
condensation during operating
maximum
90 %
90 %
Protection class IP
IP65
IP65
Ambient condition for (standard)
operation mode
When used under hazardous conditions (Zone 2),
the SCALANCE W788-xPRO/RR or W74x-1PRO/RR product
must be installed in an enclosure. To comply with
EN 50021, this enclosure must meet the requirements of
at least IP 54 in compliance with EN 60529.
When used under hazardous conditions (Zone 2),
the SCALANCE W788-xPRO/RR or W74x-1PRO/RR product
must be installed in an enclosure. To comply with
EN 50021, this enclosure must meet the requirements of
at least IP 54 in compliance with EN 60529.
Width of enclosure without antenna
200 mm
200 mm
Height of enclosure without antenna
176 mm
176 mm
Depth of enclosure without antenna
79 mm
79 mm
Net weight
1.7 kg
1.7 kg
Mounting type wall mounting
Yes
Yes
2.41 … 2.48 GHz
2.41 … 2.48 GHz
4.9 … 5.8 GHz
4.9 … 5.8 GHz
Product function
• Access Point Mode
• Client Mode
Yes
Yes
Yes
Yes
Number of SSIDs
8
16
Product function
• iPCF Access Point
• iPCF client
• iPCF-MC Access Point
• iPCF-MC client
Yes
Yes
in preparation
in preparation
Yes
Yes
in preparation
in preparation
1
2
Permitted ambient conditions
Ambient temperature
• during operating
• during storage
• during transport
Design, dimensions and weight
Wireless frequencies
6
Radio frequency
• for WLAN in 2.4 GHz
frequency band
• for WLAN in 5 GHz
frequency band
Product properties, functions,
components general
Number of iPCF-capable
radio modules
1)
Wireless approval in the USA
6/26
Siemens IK PI · 2015
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Access Points IEEE 802.11n
SCALANCE W788 M12 for indoor use
■ Technical specifications (continued)
Article No.
6GK5788-1GD00-0AA0
6GK5788-1GD00-0AB01)
6GK5788-2GD00-0AA0
6GK5788-2GD00-0AB01)
Product-type designation
SCALANCE W788-1 M12
SCALANCE W788-2 M12
Product functions management,
configuration
Number of manageable IP addresses 8
in client
Product function
• CLI
• web-based management
• MIB support
• TRAPs via email
• Configuration with STEP 7
• configuration with STEP 7
in the TIA Portal
• operation with IWLAN controller
• operation with Enterasys WLAN
controller
• forced roaming with IWLAN
• WDS
8
Yes
Yes
Yes
Yes
in preparation
in preparation
Yes
Yes
Yes
Yes
in preparation
in preparation
No
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Identification & maintenance function
• I&M0 - device-specific information Yes
Yes
• I&M1 – higher level designation/
location designation
Yes
Yes
Protocol is supported
• Address Resolution Protocol (ARP)
• ICMP
• Telnet
• HTTP
• HTTPS
• TFTP
• SNMP v1
• SNMP v2
• SNMP v3
• DCP
• LLDP
6
Product functions Diagnosis
Product function
• PROFINET IO diagnosis
• localization via Aeroscout
• SysLog
in preparation
in preparation
Yes
in preparation
in preparation
Yes
Yes
Yes
Yes
No
Yes
No
Yes
Yes
Product functions VLAN
Product function function VLAN with
IWLAN
Product functions DHCP
Product function
• DHCP client
• in Client Mode DHCP server
via LAN
Product functions Redundancy
Protocol is supported STP/RSTP
1)
Wireless approval in the USA
Siemens IK PI · 2015
6/27
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Access Points IEEE 802.11n
SCALANCE W788 M12 for indoor use
■ Technical specifications (continued)
Article No.
6GK5788-1GD00-0AA0
6GK5788-1GD00-0AB01)
6GK5788-2GD00-0AA0
6GK5788-2GD00-0AB01)
Product-type designation
SCALANCE W788-1 M12
SCALANCE W788-2 M12
Yes
Yes
Yes
No
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
EN 60079-15:2005, EN 60079-0:2006,
II 3 G Ex nA II T4 KEMA 07 ATEX 0145X
UL 60950-1 CSA C22.2 No. 60950-1
EN 60079-15:2005, EN 60079-0:2006,
II 3 G Ex nA II T4 KEMA 07 ATEX 0145X
UL 60950-1 CSA C22.2 No. 60950-1
Yes
Yes
Yes
No
No
Yes
Yes
Yes
No
No
No
No
Yes
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
You will find the current list of countries at:
www.siemens.com/wireless-approvals
You will find the current list of countries at:
www.siemens.com/wireless-approvals
-
-
Product functions Security
Product function
• ACL - MAC-based
• Management security,
ACL-IP based
• IEEE 802.1x (radius)
• NAT/NAPT
• access protection
according to IEEE802.11i
• WPA/WPA2
• TKIP/AES
Protocol is supported SSH
Product functions Time
Protocol is supported
• SNTP
• SIMATIC Time
Standards, specifications,
approvals
Standard
• for hazardous zone
• for safety of CSA and UL
6
Verification of suitability
• CE mark
• EC declaration of conformity
• C-Tick
• CCC
• Railway application in accordance
with EN 50155
• e1 approval
• E1 approval
• NEMA4X
• Power-over-Ethernet
according IEEE802.3at for type 1
and IEEE802.3af
• Power-over-Ethernet
according to IEEE802.3at for type 2
Standard for wireless communication
• IEEE 802.11a
• IEEE 802.11b
• IEEE 802.11e
• IEEE 802.11g
• IEEE 802.11h
• IEEE 802.11i
• IEEE 802.11n
Wireless approval
Accessories
Accessories
1)
Wireless approval in the USA
6/28
Siemens IK PI · 2015
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Access Points IEEE 802.11n
SCALANCE W788 M12 for indoor use
■ Ordering data
Article No.
Article No.
SCALANCE W788 M12 access points
Accessories
IWLAN access points
with built-in wireless interfaces;
wireless networks
IEEE 802.11a/b/g/h/n at 2.4/5 GHz
up to 450 Mbit/s;
WPA2/AES;
Power over Ethernet (PoE),
IP65 degree of protection
(-20 °C to +60 °C);
scope of delivery:
Mounting hardware;
manual on CD-ROM,
German/English
KEY-PLUG W780 iFeatures
C-PLUG
DIN rail mounting adapter
6GK5788-1GD00-0AA0
6GK5788-1GD00-0AB0
SCALANCE W788-2 M12
IWLAN dual access point with two
integrated wireless interfaces
• National approvals for operation
outside the USA
• National approvals for operation
within the USA 1)
6GK1900-0AB00
Swap medium for simple replacement of devices in the event of a
fault; for storing configuration data;
can be used in SIMATIC NET
products with PLUG compartment
SCALANCE W788-1 M12
IWLAN access point with one
integrated wireless interface
• National approvals for operation
outside the USA
• National approvals for operation
within the USA 1)
6GK5907-8PA00
Swap medium for enabling additional iFeatures, for simple device
replacement if a fault occurs and for
storage of configuration data;
Can be used in SCALANCE W
access points with PLUG compartment
6GK5798-8ML00-0AB3
DIN rail mounting adapter for
SCALANCE W788 M12 and
SCALANCE W788 RJ45;
screw fixing for mounting on a
35 mm DIN rail to EN 50 022;
scope of supply: 3 units per pack
IE FC M12 Plug PRO 4 x 2
6GK5788-2GD00-0AA0
6GK5788-2GD00-0AB0
M12 plug-in connector suitable
for on-site assembly (X-coded,
IP65/IP67), metal enclosure,
insulation displacement fast connection method, for SCALANCE W
• 1 unit
• 8 units
6GK1901-0DB30-6AA0
6GK1901-0DB30-6AA8
IE FC Standard Cable GP 4 x 2
6XV1878-2A
6
8-core, shielded TP installation
cable for connection to
IE FC RJ45 Plug 4 x 2 and
IE M12 Plug PRO 4 x 2;
PROFINET-compatible;
with UL approval;
sold by the meter;
max. length 1 000 m,
minimum order quantity 20 m
IE FC Stripping Tool
6GK1901-1GA00
Preadjusted stripping tool for fast
stripping of the Industrial Ethernet
FC cables
Power M12 Cable Connector PRO
6GK1907-0DC10-6AA3
Terminal socket for connection of
SCALANCE W700 for 24 V DC
supply voltage; 4-pole, A-coded,
with assembly instructions, 3 units
Power Cable 2 x 0.75
6XV1812-8A
Connecting cable for Power M12
Cable Connector PRO,
sold by the meter
Antennas and miscellaneous
IWLAN accessories
1)
See Industrial Wireless LAN/
accessories
Please note national approvals under
http://www.siemens.com/wireless-approvals
■ More information
Selection tools:
Wireless approvals:
To assist in selecting Industrial Ethernet components, the TIA
Selection Tool is available at:
http://www.siemens.com/tia-selection-tool
Current approvals can be found on the Internet at:
http://www.siemens.com/wireless-approvals
Siemens IK PI · 2015
6/29
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Access Points IEEE 802.11n
SCALANCE W788 M12 EEC for enhanced environmental conditions
■ Overview
■ Design
• Suitable for use in the industry and automation area,
but especially in the railroad environment
• Rugged aluminum enclosure, shock and vibration-proof,
for high mechanical requirements
• Special coating of the printed circuit boards (conformal
coating)
• Resistant to condensation
• Railway approval in accordance with EN 50155 and
NEMA TS2
• High IP65 degree of protection against dust and water jets
• For use at ambient temperatures from -40 °C to +70 °C
• 6 x N-Connect sockets for the connection of direct mountable
and remote antennas
• Antenna placement optimized for the 3x3 MIMO technology;
the antennas do not interfere with each other when they are
mounted directly on the device
• Suitable for 2.4 GHz and 5 GHz
• 1 x M12 connection for 10/100/1 000 Mbit/s with Power-overEthernet according to IEEE 802.3at
• 1 x M12 socket for power supply (24 V DC)
• 1 x C-PLUG compartment (KEY-PLUG/C-PLUG)
• Function LEDs for optical signaling of faults/errors and
operating statuses
• Mounting: Wall, S7-1500 mounting rail, S7-300 mounting rail,
or on 35 mm standard mounting rail
6
3x N-Connect
(female)
connections
for antennas
PLUG slot
24 V DC
connection
M12 connection
(Gigabit)
n†prXW††ZWY][
3x N-Connect (female) connections for antennas
Design and interfaces of the SCALANCE W788-2 M12 EEC
access points
Product version
SCALANCE W788-2 M12 EEC
• Two radio cards are permanently installed; functional scope
can be expanded by using a KEY-PLUG W780 iFeatures
6/30
Siemens IK PI · 2015
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Access Points IEEE 802.11n
SCALANCE W788 M12 EEC for enhanced environmental conditions
■ Function
The SCALANCE W788 M12 EEC (Extended Environmental
Conditions) are designed for use in railway applications. The devices satisfy EN 50155, the approval for railway applications,
and can thus be used for rail traffic. The devices also have an
extended temperature range from -40 °C to +70 °C. Combined
with the railway-approved antennas, which are connected via
the N-Connect antenna connections (female), these products
can establish a reliable IWLAN wireless infrastructure outdoors.
The devices can be installed at the location that is most
favorable for the wireless link. The enclosure and the connectors
are resistant to high levels of shock and vibration because all the
connectors are screwed. Thanks to Conformal Coating and IP65
degree of protection, SCALANCE W788 M12 EEC is ideally
suited for environments with widely varying temperatures and
where protection against dust and water play an important role.
To achieve optimal coverage for special applications, the
complete range of SCALANCE W antennas is available. Some
antennas even have railway certification.
SCALANCE W788-2 M12 EEC access points can also be
operated as client modules.
ANT 795-6MN
SCALANCE
W788-2 M12 EEC
ANT793-8DJ
ANT793-8DJ
ANT793-8DJ
ANT 795-6MN
Industrial Ethernet
(Trainside)
SCALANCE
W788-2 M12
EEC
Tunnel
SCALANCE
W788-2 M12
EEC
SCALANCE
XR324-12M TS
with M12 module
SCALANCE
W788-2 M12
EEC
SCALANCE W788-2 M12 EEC
Industrial Ethernet
(Trainside)
Tunnel
Communication
Server
Trainguard
Train Control
SCALANCE
X308-2M TS
SCALANCE
XR552-12M
Tunnel
6
Industrial Ethernet (Trackside)
Infotainment
Server
Workstations
Content
Workstation
G_IK10_XX_30307
ANT793-8DJ
Data transmission on trains using the SCALANCE W788 M12 EEC access points with railway certification
Provided that a delay (several 100 ms) caused by roaming in
accordance with IEEE 802.11 is tolerated by all communication
stations when switching the radio cells, the communication
continues uninterrupted.
For real-time requirements, the SCALANCE W788 M12 EEC
can be equipped with KEY-PLUG functionality for activating
iFeatures.
Siemens IK PI · 2015
6/31
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Access Points IEEE 802.11n
SCALANCE W788 M12 EEC for enhanced environmental conditions
■ Technical specifications
Article No.
6GK5788-2GD00-0TA0
6GK5788-2GD00-0TB01)
Product-type designation
SCALANCE W788-2 M12 EEC
450 Mbit/s
10 … 1 000 Mbit/s
-
Interfaces
Number of electrical connections
• for network components
and terminal equipment
• for power supply
• for redundant power supply
Design of the electrical connection
• for network components
and terminal equipment
• for power supply
1
1
1
Product-type designation
SCALANCE W788-2 M12 EEC
Ambient temperature
• during operating
• during storage
• during transport
90 %
Protection class IP
IP65
Ambient condition for (standard)
operation mode
When used under hazardous
conditions (Zone 2),
the SCALANCE W788-xPRO/RR or
W74x-1PRO/RR product must be
installed in an enclosure. To comply
with EN 50021, this enclosure must
meet the requirements of at least
IP54 in compliance with EN 60529.
M12 interface (4-pole, A-coded)
Number of optical interfaces
for optical waveguide at 100 Mbit/s
-
Design of optical interface
for optical waveguide at 100 Mbit/s
-
Design of the removable storage
C-PLUG
Yes
Design, dimensions and weight
Width of enclosure without antenna
200 mm
Height of enclosure without antenna
176 mm
Depth of enclosure without antenna
79 mm
Net weight
1.7 kg
Mounting type wall mounting
Yes
Number of radio cards permanently
installed
2
Number of internal antennas
-
Number of electrical connections
for external antenna(s)
6
Design of the electrical connection
for external antenna(s)
N-Connect (socket)
Radio frequency
• for WLAN in 2.4 GHz
frequency band
• for WLAN in 5 GHz
frequency band
Product property external antenna
can be mounted directly on device
Yes
Product properties, functions,
components general
Wireless frequencies
Supply voltage,
current consumption, power loss
Type of supply voltage
Supply voltage
• 1 from M12 Power Connector
(A-coded) for redundant power
supply
• 2 from M12 Power Connector
(A-coded) for redundant power
supply
• from Power-over-Ethernet
according IEEE802.3at for type 1
and IEEE802.3af
• from Power-over-Ethernet
according IEEE802.3at for type 2
DC
19.2 V
28.8 V
48 V
50 V
Current consumed
• at 24 V with DC typical
0.63 A
• with Power-over-Ethernet
0.22 A
according to IEEE802.3at for type 1
and IEEE802.3af typical
• with Power-over-Ethernet according 0.3 A
to IEEE802.3at for type 2 typical
Effective power loss
• at 24V for DC typical
15 W
• with Power-over-Ethernet
10.7 W
according to IEEE802.3at for type 1
and IEEE802.3af typical
• with Power-over-Ethernet according 15 W
to IEEE802.3at for type 2 typical
6/32
Siemens IK PI · 2015
-20 … +60 °C
-40 … +70 °C
-40 … +70 °C
Relative humidity at 25 °C without
condensation during operating
maximum
M12 interface (8-pole, X-coded), PoE
Interfaces wireless
6
6GK5788-2GD00-0TA0
6GK5788-2GD00-0TB01)
Permitted ambient conditions
Transmission rate
Transmission rate
• with W-LAN maximum
• with Industrial Ethernet
• note
Article No.
2.41 … 2.48 GHz
4.9 … 5.8 GHz
Product function
• Access Point Mode
• Client Mode
Yes
Yes
Number of SSIDs
16
Product function
• iPCF Access Point
• iPCF client
• iPCF-MC Access Point
• iPCF-MC client
Yes
Yes
in preparation
in preparation
Number of iPCF-capable radio
modules
0
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Access Points IEEE 802.11n
SCALANCE W788 M12 EEC for enhanced environmental conditions
■ Technical specifications (continued)
Article No.
6GK5788-2GD00-0TA0
6GK5788-2GD00-0TB01)
Product-type designation
SCALANCE W788-2 M12 EEC
Product functions management,
configuration
Number of manageable
IP addresses in client
Product function
• CLI
• web-based management
• MIB support
• TRAPs via email
• Configuration with STEP 7
• configuration with STEP 7
in the TIA Portal
• operation with IWLAN controller
• operation with Enterasys WLAN
controller
• forced roaming with IWLAN
• WDS
Protocol is supported
• Address Resolution Protocol (ARP)
• ICMP
• Telnet
• HTTP
• HTTPS
• TFTP
• SNMP v1
• SNMP v2
• SNMP v3
• DCP
• LLDP
8
Yes
Yes
Yes
Yes
in preparation
in preparation
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
in preparation
in preparation
Yes
SCALANCE W788-2 M12 EEC
Product function
• ACL - MAC-based
• Management security,
ACL-IP based
• IEEE 802.1x (radius)
• NAT/NAPT
• access protection
according to IEEE802.11i
• WPA/WPA2
• TKIP/AES
Protocol is supported
• SNTP
• SIMATIC Time
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Standards, specifications,
approvals
Standard
• for hazardous zone
• for safety of CSA and UL
Verification of suitability
• CE mark
• EC declaration of conformity
• C-Tick
• CCC
• Railway application
in accordance with EN 50155
• e1 approval
• E1 approval
• NEMA4X
• Power-over-Ethernet
according IEEE802.3at for type 1
and IEEE802.3af
• Power-over-Ethernet
according to IEEE802.3at for type 2
Yes
Yes
No
Wireless approval
Product functions DHCP
Yes
Product functions Time
Standard for wireless communication
• IEEE 802.11a
• IEEE 802.11b
• IEEE 802.11e
• IEEE 802.11g
• IEEE 802.11h
• IEEE 802.11i
• IEEE 802.11n
Product functions VLAN
Product function
• DHCP client
• in Client Mode DHCP server
via LAN
Product-type designation
Protocol is supported SSH
No
No
Product functions Diagnosis
Product function function VLAN
with IWLAN
6GK5788-2GD00-0TA0
6GK5788-2GD00-0TB01)
Product functions Security
Identification & maintenance function
• I&M0 - device-specific information Yes
Yes
• I&M1 – higher level designation/
location designation
Product function
• PROFINET IO diagnosis
• localization via Aeroscout
• SysLog
Article No.
UL 60950-1 CSA C22.2 No. 60950-1
Yes
Yes
Yes
Yes
6
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
You will find the current list
of countries at:
www.siemens.com/wireless-approvals
Product functions Redundancy
Protocol is supported STP/RSTP
Yes
1)
Wireless approval in the USA
Siemens IK PI · 2015
6/33
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Access Points IEEE 802.11n
SCALANCE W788 M12 EEC for enhanced environmental conditions
■ Ordering data
Article No.
SCALANCE W788 M12 EEC access points
IE FC M12 Plug PRO 4 x 2
IWLAN access points
with built-in wireless interfaces;
wireless networks
IEEE 802.11a/b/g/h/n at 2.4/5 GHz
up to 450 Mbit/s;
railway approval in accordance
with EN 50155 / NEMA TS2;
conformal coating;
WPA2/AES; Power over Ethernet
(PoE), IP65 degree of protection;
scope of supply:
Mounting hardware; manual
on CD-ROM,
German/English
M12 plug-in connector suitable
for on-site assembly (X-coded,
IP65/IP67), metal enclosure,
insulation displacement fast connection method, for SCALANCE W
• 1 unit
• 8 units
6GK1901-0DB30-6AA0
6GK1901-0DB30-6AA8
IE FC Standard Cable GP 4 x 2
6XV1878-2A
SCALANCE W788-2 M12 EEC
IWLAN dual access point with two
integrated wireless interfaces
• National approvals for operation
outside the USA
• National approvals for operation
within the USA 1)
6GK5788-2GD00-0TA0
KEY-PLUG W780 iFeatures
6GK5907-8PA00
Power M12 Cable Connector PRO
6GK1901-1GA00
6GK1907-0DC10-6AA3
Terminal socket for connection of
SCALANCE W700 for 24 V DC
supply voltage;
4-pole, A-coded, with assembly
instructions, 3 units
Power Cable 2 x 0.75
6GK1900-0AB00
Swap medium for simple replacement of devices in the event
of a fault;
for storing configuration data;
can be used in SIMATIC NET products with PLUG compartment
DIN rail mounting adapter
IE FC Stripping Tool
Preadjusted stripping tool for fast
stripping of the Industrial Ethernet
FC cables
Swap medium for enabling additional iFeatures, for simple device
replacement if a fault occurs and for
storage of configuration data;
Can be used in SCALANCE W
access points with PLUG compartment
C-PLUG
8-core, shielded TP installation
cable for connection to
IE FC RJ45 Plug 4 x 2 and
IE M12 Plug PRO 4 x 2;
PROFINET-compatible;
with UL approval;
sold by the meter;
max. length 1 000 m,
minimum order quantity 20 m
6GK5788-2GD00-0TB0
Accessories
6
Article No.
6XV1812-8A
Connecting cable for Power M12
Cable Connector PRO,
sold by the meter
Antennas and miscellaneous
IWLAN accessories
See Industrial Wireless LAN/
accessories
6GK5798-8ML00-0AB3
DIN rail mounting adapter for
SCALANCE W788 M12 and
SCALANCE W788 RJ45;
screw fixing for mounting on a
35 mm DIN rail to EN 50 022;
scope of supply: 3 units per pack
1)
Please note national approvals under
http://www.siemens.com/wireless-approvals
■ More information
Selection tools:
Wireless approvals:
To assist in selecting Industrial Ethernet components, the TIA
Selection Tool is available at:
http://www.siemens.com/tia-selection-tool
Current approvals can be found on the Internet at:
http://www.siemens.com/wireless-approvals
6/34
Siemens IK PI · 2015
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Access Points IEEE 802.11n
SCALANCE W786 RJ45 for outdoor use
• Particularly well-suited to applications with high climatic
requirements when installed outdoors and in areas accessible
to the public
■ Design
• Rugged, impact-resistant plastic enclosure, shock and
vibration-proof for demanding mechanical requirements
• High IP65 degree of protection against dust and water jets
• For use at ambient temperatures from -40 °C to +60 °C
• Resistant to condensation
• Resistant to UV radiation and saltwater spray
• Design for use outdoors
• 3 x R-SMA sockets for the connection of remote antennas
(6 x R-SMA sockets or six internal antennas for the variants
with two wireless modules)
• Suitable for 2.4 GHz and 5 GHz
• 1 x RJ45 connector for 10/100/1 000 Mbit/s and Power-overEthernet according to IEEE 802.3at
• 1 x 24 V DC connector, optional operation with 12 to 24 V DC
or 100 to 240 V AC with power supply that can be integrated
in the device
• 1 x PLUG compartment (KEY-PLUG/C-PLUG)
• Function LEDs for optical signaling of faults/errors and
operating statuses
• Resistant to destruction through connections within the device
• Mounting: Wall or, with optional mounting set, on S7 mounting
rail, 35 mm standard mounting rail, or on a pole
Infeed of 24 V DC or
with power supplies
100-240 V AC or
12-24 V DC (redundant)
6
RJ45 connection
(Gigabit)
6 x antenna
connections
R-SMA
(female)
depending
on variant
PLUG
slot
Reset button
Internal antennas
depending on variant
n†prXW††ZWX]_
■ Overview
Design and interfaces of the SCALANCE W786 access points
Product versions
SCALANCE W786-1 RJ45
• A radio card is permanently installed; functional scope can be
expanded by using a KEY-PLUG W780 iFeatures
SCALANCE W786-2 RJ45
• Two radio cards are permanently installed; functional scope
can be expanded by using a KEY-PLUG W780 iFeatures
SCALANCE W786-2IA RJ45
• Two radio cards are permanently installed in the device;
six internal antennas; functional scope can be expanded by
using a KEY-PLUG W780 iFeatures
Siemens IK PI · 2015
6/35
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Access Points IEEE 802.11n
SCALANCE W786 RJ45 for outdoor use
■ Function
In the case of access points with two wireless modules, one
module implements communication of the access points with
each other. The radio link for the stations, e.g. a mobile crane
system, is established by the second wireless module. Wireless
coverage of larger areas can therefore be provided with the
same device.
In the case of SCALANCE W786, this only concerns access
points which can, however, be configured as client modules
through Web-based management. Then, depending on the
selected variant, a maximum of one radio module will be available as a client.
Antenna
ANT793-8DJ
Antenna
ANT793-6DG
SCALANCE
W786-1 RJ45
SCALANCE
W786-1 RJ45
Radio cell
Use of the SCALANCE W786 product line in areas subject to demanding climatic requirements
6/36
Siemens IK PI · 2015
n†prXW††ZWY_^
6
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Access Points IEEE 802.11n
SCALANCE W786 RJ45 for outdoor use
■ Technical specifications
Article No.
6GK5786-1FC00-0AA0
6GK5786-1FC00-0AB01)
6GK5786-2HC00-0AA0
6GK5786-2HC00-0AB01)
6GK5786-2FC00-0AA0
6GK5786-2FC00-0AB01)
Product-type designation
SCALANCE W786-1 RJ45
SCALANCE W786-2IA RJ45
SCALANCE W786-2 RJ45
450 Mbit/s
10 … 1 000 Mbit/s
-
450 Mbit/s
10 … 1 000 Mbit/s
-
450 Mbit/s
10 … 1 000 Mbit/s
-
1
1
1
1
1
1
1
1
1
RJ45 socket
RJ45 socket
RJ45 socket
2-pole connector (24 V DC)
or optionally available power supply
adapter (4-pole 24 V DC or
3-pole 110 to 230 V AC)
2-pole connector (24 V DC)
or optionally available power supply
adapter (4-pole 24 V DC or
3-pole 110 to 230 V AC)
2-pole connector (24 V DC)
or optionally available power supply
adapter (4-pole 24 V DC or
3-pole 110 to 230 V AC)
Number of optical interfaces
for optical waveguide at 100 Mbit/s
-
-
-
Design of optical interface
for optical waveguide at 100 Mbit/s
-
-
-
Number of optical interfaces
for optical waveguide at 1 000 Mbit/s
-
-
Design of optical interface
for optical waveguide at 1 000 Mbit/s
-
-
Yes
Yes
Yes
Number of radio cards permanently
installed
1
2
2
Number of internal antennas
-
6
-
Number of electrical connections
for external antenna(s)
3
-
6
Design of the electrical connection
for external antenna(s)
R-SMA (socket)
-
R-SMA (socket)
Product property external antenna
can be mounted directly on device
No
-
No
Transmission rate
Transmission rate
• with W-LAN maximum
• with Industrial Ethernet
• note
Interfaces
Number of electrical connections
• for network components
and terminal equipment
• for power supply
• for redundant power supply
Design of electrical connection
• for network components
and terminal equipment
• for power supply
design of the removable storage
C-PLUG
6
Interfaces wireless
1)
Wireless approval in the USA
Siemens IK PI · 2015
6/37
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Access Points IEEE 802.11n
SCALANCE W786 RJ45 for outdoor use
■ Technical specifications (continued)
Article No.
6GK5786-1FC00-0AA0
6GK5786-1FC00-0AB01)
6GK5786-2HC00-0AA0
6GK5786-2HC00-0AB01)
6GK5786-2FC00-0AA0
6GK5786-2FC00-0AB01)
Product-type designation
SCALANCE W786-1 RJ45
SCALANCE W786-2IA RJ45
SCALANCE W786-2 RJ45
DC
DC
DC
19.2 V
28.8 V
48 V
19.2 V
28.8 V
48 V
19.2 V
28.8 V
48 V
50 V
50 V
50 V
100 … 240 V
12 … 24 V
100 … 240 V
12 … 24 V
100 … 240 V
12 … 24 V
0.45 A
0.05 A
0.22 A
0.63 A
0.07 A
0.22 A
0.63 A
0.07 A
0.22 A
-
-
-
10.7 W
10.7 W
10.7 W
15 W
15 W
15 W
15 W
15 W
10.7 W
-
-
-
-40 … +60 °C
-40 … +85 °C
-40 … +85 °C
-40 … +60 °C
-40 … +85 °C
-40 … +85 °C
-40 … +60 °C
-40 … +85 °C
-40 … +85 °C
Relative humidity at 25 °C without
condensation during operating
maximum
100 %
100 %
100 %
Protection class IP
IP65
IP65
IP65
Ambient condition for (standard)
operation mode
When using the power supply
100 to 240 V AC,
an operating temperature of
-40 °C to +60 °C is permissible
When using the power supply
100 to 240 V AC,
an operating temperature of
-40 °C to +60 °C is permissible
When using the power supply
100 to 240 V AC,
an operating temperature of
-40 °C to +60 °C is permissible
Width of enclosure without antenna
251 mm
251 mm
251 mm
Height of enclosure without antenna
251 mm
251 mm
251 mm
Depth of enclosure without antenna
72 mm
72 mm
72 mm
Net weight
2.24 kg
2.24 kg
2.24 kg
Mounting type wall mounting
Yes
Yes
Yes
Mounting type
For mast mounting,
35 mm DIN rail mounting and S7-300
rail mounting, an additional support
plate is required
For mast mounting,
35 mm DIN rail mounting and S7-300
rail mounting, an additional support
plate is required
For mast mounting,
35 mm DIN rail mounting and S7-300
rail mounting, an additional support
plate is required
2.41 … 2.48 GHz
2.41 … 2.48 GHz
2.41 … 2.48 GHz
4.9 … 5.8 GHz
4.9 … 5.8 GHz
4.9 … 5.8 GHz
Supply voltage,
current consumption, power loss
Type of supply voltage
Supply voltage
• 1 from terminal block
• 2 from terminal block
• from Power-over-Ethernet
according IEEE802.3at for type 1
and IEEE802.3af
• from Power-over-Ethernet
according IEEE802.3at for type 2
• from optional integratable
power supply
- with AC
- with DC
Current consumed
• at 24 V with DC typical
• at 230 V with AC typical
• with Power-over-Ethernet
according to IEEE802.3at for type 1
and IEEE802.3af typical
• with Power-over-Ethernet
according to IEEE802.3at
for type 2 typical
6
Effective power loss
• at 24V for DC typical
• at 230 V with AC typical
• with Power-over-Ethernet
according to IEEE802.3at for type 1
and IEEE802.3af typical
• with Power-over-Ethernet
according to IEEE802.3at
for type 2 typical
Permitted ambient conditions
Ambient temperature
• during operating
• during storage
• during transport
Design, dimensions and weight
Wireless frequencies
Radio frequency
• for WLAN in 2.4 GHz
frequency band
• for WLAN in 5 GHz
frequency band
1)
Wireless approval in the USA
6/38
Siemens IK PI · 2015
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Access Points IEEE 802.11n
SCALANCE W786 RJ45 for outdoor use
■ Technical specifications (continued)
Article No.
6GK5786-1FC00-0AA0
6GK5786-1FC00-0AB01)
6GK5786-2HC00-0AA0
6GK5786-2HC00-0AB01)
6GK5786-2FC00-0AA0
6GK5786-2FC00-0AB01)
Product-type designation
SCALANCE W786-1 RJ45
SCALANCE W786-2IA RJ45
SCALANCE W786-2 RJ45
Product function
• Access Point Mode
• Client Mode
Yes
Yes
Yes
Yes
Yes
Yes
Number of SSIDs
8
16
16
Product function
• iPCF Access Point
• iPCF client
• iPCF-MC Access Point
• iPCF-MC client
Yes
Yes
in preparation
in preparation
Yes
Yes
in preparation
in preparation
Yes
Yes
in preparation
in preparation
1
2
2
Number of manageable IP addresses 8
in client
8
8
Yes
Yes
Yes
Yes
in preparation
in preparation
Yes
Yes
Yes
Yes
in preparation
in preparation
Yes
Yes
Yes
Yes
in preparation
in preparation
No
No
No
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Identification & maintenance function
• I&M0 - device-specific information Yes
• I&M1 – higher level designation/
Yes
location designation
Yes
Yes
Yes
Yes
in preparation
in preparation
Yes
in preparation
in preparation
Yes
in preparation
in preparation
Yes
Yes
Yes
Yes
Yes
No
Yes
No
Yes
No
Product properties, functions,
components general
Number of iPCF-capable radio
modules
Product functions management,
configuration
Product function
• CLI
• web-based management
• MIB support
• TRAPs via email
• Configuration with STEP 7
• configuration with STEP 7
in the TIA Portal
• operation with IWLAN controller
• operation with Enterasys WLAN
controller
• forced roaming with IWLAN
• WDS
Protocol is supported
• Address Resolution Protocol (ARP)
• ICMP
• Telnet
• HTTP
• HTTPS
• TFTP
• SNMP v1
• SNMP v2
• SNMP v3
• DCP
• LLDP
6
Product functions Diagnosis
Product function
• PROFINET IO diagnosis
• localization via Aeroscout
• SysLog
Product functions VLAN
Product function function VLAN
with IWLAN
Product functions DHCP
Product function
• DHCP client
• in Client Mode DHCP server
via LAN
1)
Wireless approval in the USA
Siemens IK PI · 2015
6/39
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Access Points IEEE 802.11n
SCALANCE W786 RJ45 for outdoor use
■ Technical specifications (continued)
Article No.
6GK5786-1FC00-0AA0
6GK5786-1FC00-0AB01)
6GK5786-2HC00-0AA0
6GK5786-2HC00-0AB01)
6GK5786-2FC00-0AA0
6GK5786-2FC00-0AB01)
Product-type designation
SCALANCE W786-1 RJ45
SCALANCE W786-2IA RJ45
SCALANCE W786-2 RJ45
Yes
Yes
Yes
-
Yes
Yes
Yes
No
Yes
Yes
No
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
EN 60079-15:2005, EN 60079-0:2006,
II 3 G Ex nA II T4 KEMA 07 ATEX 0145X
UL 60950-1 CSA C22.2 No. 60950-1
-
EN 60079-15:2005, EN 60079-0:2006,
II 3 G Ex nA II T4 KEMA 07 ATEX 0145X
UL 60950-1 CSA C22.2 No. 60950-1
-
EN 60079-15:2005, EN 60079-0:2006,
II 3 G Ex nA II T4 KEMA 07 ATEX 0145X
UL 60950-1 CSA C22.2 No. 60950-1
-
Yes
Yes
Yes
No
No
Yes
Yes
Yes
No
No
Yes
Yes
Yes
No
No
No
No
Yes
Yes
No
No
Yes
Yes
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Product functions Redundancy
Protocol is supported STP/RSTP
Product functions Security
Product function
• ACL - MAC-based
• Management security,
ACL-IP based
• IEEE 802.1x (radius)
• NAT/NAPT
• access protection
according to IEEE802.11i
• WPA/WPA2
• TKIP/AES
Protocol is supported SSH
Product functions Time
Protocol is supported
• SNTP
• SIMATIC Time
Standards, specifications,
approvals
6
Standard
• for EMC from FM
• for hazardous zone
• for safety of CSA and UL
• for hazardous area of CSA and UL
Verification of suitability
• CE mark
• EC declaration of conformity
• C-Tick
• CCC
• Railway application in accordance
with EN 50155
• e1 approval
• E1 approval
• NEMA4X
• Power-over-Ethernet
according IEEE802.3at for type 1
and IEEE802.3af
• Power-over-Ethernet
according to IEEE802.3at for type 2
Standard for wireless communication
• IEEE 802.11a
• IEEE 802.11b
• IEEE 802.11e
• IEEE 802.11g
• IEEE 802.11h
• IEEE 802.11i
• IEEE 802.11n
Wireless approval
You will find the current list
You will find the current list
You will find the current list
of countries at:
of countries at:
of countries at:
www.siemens.com/wireless-approvals www.siemens.com/wireless-approvals www.siemens.com/wireless-approvals
Accessories
Accessories
1)
24 V DC screw terminal included in
scope of delivery
Wireless approval in the USA
6/40
Siemens IK PI · 2015
24 V DC screw terminal included in
scope of delivery
24 V DC screw terminal included in
scope of delivery
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Access Points IEEE 802.11n
SCALANCE W786 RJ45 for outdoor use
■ Ordering data
Article No.
Article No.
SCALANCE W786 access points
Accessories
IWLAN access points with
built-in wireless interfaces;
wireless networks
IEEE 802.11a/b/g/h/n at 2.4/5 GHz
up to 450 Mbps;
WPA2/AES;
Power over Ethernet (PoE),
IP65 degree of protection
(-40 °C to +60 °C);
scope of delivery:
Mounting hardware,
2-pin screw terminal for 24 V DC;
manual on CD-ROM;
German/English
KEY-PLUG W780 iFeatures
C-PLUG
Power supply PS791-2DC
6GK5786-1FC00-0AA0
6GK5786-1FC00-0AB0
Power supply PS791-2AC
6GK5786-2FC00-0AA0
6GK5791-2AC00-0AA0
110 V AC to 230 V AC power supply
for installation in the
SCALANCE W786 products;
operating instructions
in German/English
MS1 mounting set
6GK5798-8MG00-0AA0
Mounting set for fixing
SCALANCE W786 products to
an S7-300 mounting rail or a 35 mm
standard DIN rail
6
IE FC RJ45 Plug 4 x 2
6GK5786-2FC00-0AB0
SCALANCE W786-2IA RJ45
IWLAN access points with two
integrated wireless interfaces and
RJ45 connection
• Six internal antennas
- National approvals for operation
outside the USA
- National approvals for operation
within the USA 1)
6GK5791-2DC00-0AA0
24 V DC power supply for installation
in SCALANCE W786 products;
operating instructions
in German/English
SCALANCE W786-2 RJ45
IWLAN access points with two
integrated wireless interfaces and
RJ45 connection
• Six connections for external
antennas
- National approvals for operation
outside the USA
- National approvals for operation
within the USA 1)
6GK1900-0AB00
Swap medium for simple replacement
of devices in the event of a fault;
for storing configuration data;
can be used in SIMATIC NET products with PLUG compartment
SCALANCE W786-1 RJ45
IWLAN access points with one
integrated wireless interface and
RJ45 connector
• Connections for three external
antennas
- National approvals for operation
outside the USA
- National approvals for operation
within the USA 1)
6GK5907-8PA00
Swap medium for enabling additional
iFeatures, for simple device
replacement if a fault occurs and for
storage of configuration data;
Can be used in SCALANCE W access
points with PLUG compartment
6GK5786-2HC00-0AA0
6GK5786-2HC00-0AB0
RJ45 plug connector for Industrial
Ethernet (10/100/1 000 Mbit/s)
with a sturdy metal enclosure and
integrated insulation displacement
contacts for connecting Industrial
Ethernet FC installation cables;
180° cable outlet;
for network components and
CPs/CPUs with Industrial Ethernet
interface
• 1 pack = 1 unit
• 1 pack = 10 units
• 1 pack = 50 units
6GK1901-1BB11-2AA0
6GK1901-1BB11-2AB0
6GK1901-1BB11-2AE0
IE FC Standard Cable GP 4 x 2
6XV1878-2A
8-core, shielded TP installation cable
for connection to IE FC RJ45 Plug
4 x 2 and IE M12 Plug PRO 4 x 2;
PROFINET-compatible;
with UL approval;
sold by the meter;
max. length 1 000 m,
minimum order quantity 20 m
IE FC Stripping Tool
6GK1901-1GA00
Preadjusted stripping tool
for fast stripping of the Industrial
Ethernet FC cables
Antennas and miscellaneous
IWLAN accessories
1)
See Industrial Wireless LAN/
accessories
Please note national approvals under
http://www.siemens.com/wireless-approvals
■ More information
Selection tools:
Wireless approvals:
To assist in selecting Industrial Ethernet components, the TIA
Selection Tool is available at:
http://www.siemens.com/tia-selection-tool
Current approvals can be found on the Internet at:
http://www.siemens.com/wireless-approvals
Siemens IK PI · 2015
6/41
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Access Points IEEE 802.11n
SCALANCE W786 SFP for outdoor use
■ Overview
■ Design
• Particularly well-suited to applications with high climatic
requirements when installed outdoors and in areas accessible
to the public
• Rugged, impact-resistant plastic enclosure, shock and
vibration-proof for demanding mechanical requirements
• Two slots for SFP plug-in transceivers (optical 2-port switch)
• High IP65 degree of protection against dust and water jets
• For use at ambient temperatures from -40 °C to +60 °C
(depending on the SFP plug-in transceiver used)
• Resistant to condensation
• Resistant to UV radiation and saltwater spray
• Design for use outdoors
• 6 x R-SMA sockets for the connection of remote antennas
• 1 x 24 V DC connector, optional operation with 12 to 24 V DC
or 100 to 240 V AC with power supply that can be integrated
in the device
• 1 x PLUG compartment (KEY-PLUG/C-PLUG)
• Function LEDs for optical signaling of faults/errors and
operating statuses
• Mounting: Wall or, with optional mounting set, on S7 mounting
rail, 35 mm standard mounting rail, or on a pole
Infeed of 24 V DC or
with power supplies
100-240 V AC or
12-24 V DC (redundant)
6
2 SFP slots with
integrated 2-port
switch
6 x connections for
antennas R-SMA
(female)
PLUG
slot
n†prXW††ZWZW_
Reset button
Design and interfaces of the SCALANCE W786-2 SFP access points
Product versions
SCALANCE W786-2 SFP
• Two wireless cards permanently installed in the device; can be
expanded to establish wireless connections with KEY-PLUG
W780 iFeatures
6/42
Siemens IK PI · 2015
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Access Points IEEE 802.11n
SCALANCE W786 SFP for outdoor use
■ Function
In the case of access points with two wireless modules, one
module implements communication of the access points with
each other. The radio link for the stations, e.g. a mobile crane
system, is established by the second wireless module. Wireless
coverage of larger areas can therefore be provided with the
same device.
If the minimum length of standard Ethernet cables is insufficient
due to the large distance of the access points from the wired
network, SCALANCE W786-2 SFP with SFP plug-in transceivers
can be used. Depending on the optical plug-in transceivers
used, ranges of up to 70 km can then be achieved.
In the case of SCALANCE W786, this only concerns access
points which can, however, be configured as client modules
through Web-based management. Then, depending on the
selected variant, a maximum of one radio module will be available as a client.
Antenna
ANT793-8DJ
Antenna
ANT793-6DG
SCALANCE
W786-1 RJ45
SCALANCE
W786-2 SFP
Radio cell
n†prXW††ZWZZ`
6
Use of the SCALANCE W786-2 SFP product line in areas subject to demanding climatic requirements
Siemens IK PI · 2015
6/43
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Access Points IEEE 802.11n
SCALANCE W786 SFP for outdoor use
■ Technical specifications
Article No.
6GK5786-2FE00-0AA0
Article No.
6GK5786-2FE00-0AA0
Product-type designation
SCALANCE W786-2 SFP
Product-type designation
SCALANCE W786-2 SFP
450 Mbit/s
1 000 Mbit/s
-
Current consumed
• at 24 V with DC typical
• at 230 V with AC typical
• with Power-over-Ethernet according
to IEEE802.3at for type 1 and
IEEE802.3af typical
• with Power-over-Ethernet according
to IEEE802.3at for type 2 typical
Transmission rate
Transfer rate
• with W-LAN maximum
• with Industrial Ethernet
• note
Interfaces
Number of electrical connections
• for network components
and terminal equipment
• for power supply
• for redundant power supply
Design of the electrical connection
• for network components
and terminal equipment
• for power supply
6
1
0
2-pole connector (24 V DC) or optionally available power supply adapter
(4-pole 24 V DC or 3-pole 110 to 230
V AC)
Number of optical interfaces
for optical waveguide at 100 Mbit/s
2
Design of optical interface
for optical waveguide at 100 Mbit/s
SFP slot
2
Number of optical interfaces
for optical waveguide at 1 000 Mbit/s
SFP slot
Design of optical interface
for optical waveguide at 1 000 Mbit/s
design of the removable storage
C-PLUG
Number of internal antennas
2
6
Design of the electrical connection
for external antenna(s)
R-SMA (socket)
Product property external antenna
can be mounted directly on device
No
Siemens IK PI · 2015
-40 … +60 °C
-40 … +85 °C
-40 … +85 °C
100 %
Relative humidity at 25 °C without
condensation during operating maximum
Protection class IP
IP65
Ambient condition for (standard)
operation mode
When using the power supply 100 to
240 V AC, an operating temperature
of -40 °C to +60 °C is permissible
Width of enclosure without antenna
251 mm
Height of enclosure without antenna
251 mm
Depth of enclosure without antenna
72 mm
Net weight
2.24 kg
Mounting type wall mounting
Yes
Mounting type
For mast mounting, 35 mm DIN rail
mounting and S7-300 rail mounting,
an additional support plate is
required
DC
19.2 V
28.8 V
-
-
100 … 240 V
12 … 24 V
Radio frequency
• for WLAN in 2.4 GHz
frequency band
• for WLAN in 5 GHz
frequency band
2.41 … 2.48 GHz
4.9 … 5.8 GHz
Product properties, functions,
components general
Product function
• Access Point Mode
• Client Mode
Yes
Yes
Number of SSIDs
16
Product function
• iPCF Access Point
• iPCF client
• iPCF-MC Access Point
• iPCF-MC client
Yes
Yes
in preparation
in preparation
Number of iPCF-capable radio
modules
6/44
-
Wireless frequencies
Supply voltage,
current consumption, power loss
Supply voltage
• 1 from terminal block
• 2 from terminal block
• from Power-over-Ethernet
according IEEE802.3at for type 1
and IEEE802.3af
• from Power-over-Ethernet
according IEEE802.3at for type 2
• from optional integratable power
supply
- with AC
- with DC
-
Design, dimensions and weight
Number of electrical connections
for external antenna(s)
Type of supply voltage
-
Permitted ambient conditions
Ambient temperature
• during operating
• during storage
• during transport
Yes
Interfaces wireless
Number of radio cards permanently
installed
Effective power loss
• at 24V for DC typical
• at 230 V with AC typical
• with Power-over-Ethernet according
to IEEE802.3at for type 1 and
IEEE802.3af typical
• with Power-over-Ethernet according
to IEEE802.3at for type 2 typical
-
2
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Access Points IEEE 802.11n
SCALANCE W786 SFP for outdoor use
■ Technical specifications (continued)
Article No.
6GK5786-2FE00-0AA0
Product-type designation
SCALANCE W786-2 SFP
Product functions management,
configuration
Protocol is supported
• Address Resolution Protocol (ARP)
• ICMP
• Telnet
• HTTP
• HTTPS
• TFTP
• SNMP v1
• SNMP v2
• SNMP v3
• DCP
• LLDP
Yes
Yes
Yes
Yes
in preparation
in preparation
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Identification & maintenance function
• I&M0 - device-specific information Yes
• I&M1 – higher level designation/lo- Yes
cation designation
Product functions Diagnosis
Product function
• PROFINET IO diagnosis
• localization via Aeroscout
• SysLog
Product-type designation
SCALANCE W786-2 SFP
Protocol is supported
• SNTP
• SIMATIC Time
Yes
Yes
Standards, specifications,
approvals
Standard
• for hazardous zone
• for safety of CSA and UL
Verification of suitability
• CE mark
• EC declaration of conformity
• C-Tick
• CCC
• Railway application
in accordance with EN 50155
• e1 approval
• E1 approval
• NEMA4X
• Power-over-Ethernet
according IEEE802.3at for type 1
and IEEE802.3af
• Power-over-Ethernet
according to IEEE802.3at for type 2
Standard for wireless communication
• IEEE 802.11a
• IEEE 802.11b
• IEEE 802.11e
• IEEE 802.11g
• IEEE 802.11h
• IEEE 802.11i
• IEEE 802.11n
Wireless approval
in preparation
in preparation
Yes
EN 60079-15:2005,
EN 60079-0:2006, II 3 G Ex nA II T4
KEMA 07 ATEX 0145X
UL 60950-1 CSA C22.2 No. 60950-1
Yes
Yes
Yes
No
No
Yes
No
No
6
Yes
Yes
Yes
Yes
Yes
Yes
Yes
You will find the current list
of countries at:
www.siemens.com/wireless-approvals
Accessories
Accessories
Product functions VLAN
Product function function VLAN
with IWLAN
6GK5786-2FE00-0AA0
Product functions Time
Number of manageable IP addresses 8
in client
Product function
• CLI
• web-based management
• MIB support
• TRAPs via email
• Configuration with STEP 7
• configuration with STEP 7 in the TIA
Portal
• operation with IWLAN controller
• operation with Enterasys WLAN
controller
• forced roaming with IWLAN
• WDS
Article No.
24 V DC screw terminal included in
scope of delivery
Yes
Product functions DHCP
Product function
• DHCP client
• in Client Mode DHCP server
via LAN
Yes
No
Product functions Redundancy
Protocol is supported STP/RSTP
Yes
Product functions Security
Product function
• ACL - MAC-based
• Management security,
ACL-IP based
• IEEE 802.1x (radius)
• NAT/NAPT
• access protection
according to IEEE802.11i
• WPA/WPA2
• TKIP/AES
Protocol is supported SSH
Yes
Yes
No
Yes
Yes
Yes
Yes
Siemens IK PI · 2015
6/45
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Access Points IEEE 802.11n
SCALANCE W786 SFP for outdoor use
■ Ordering data
Article No.
SCALANCE W786 access points
Selection tools:
IWLAN access points
with built-in wireless interfaces;
wireless networks
IEEE 802.11a/b/g/h/n at 2.4/5 GHz
up to 450 Mbit/s; WPA2/AES;
Power over Ethernet (PoE),
IP65 degree of protection
(-40 °C to +60 °C);
scope of delivery:
Mounting hardware, 2-pin screw
terminal for 24 V DC;
manual on CD-ROM;
German/English
To assist in selecting Industrial Ethernet components, the TIA
Selection Tool is available at:
http://www.siemens.com/tia-selection-tool
Wireless approvals:
Current approvals can be found on the Internet at:
http://www.siemens.com/wireless-approvals
SCALANCE W786-2 SFP
IWLAN access points with two
integrated wireless interfaces and
RJ45 connection
• Six external antennas
- National approvals
for operation outside the USA
- National approvals
for operation within the USA 1)
6GK5786-2FE00-0AA0
6GK5786-2FE00-0AB0
Accessories
KEY-PLUG W780 iFeatures
6
■ More information
6GK5907-8PA00
Swap medium for enabling
additional iFeatures,
for simple device replacement if a
fault occurs and for storage of
configuration data;
Can be used in SCALANCE W
access points with PLUG compartment
C-PLUG
6GK1900-0AB00
Swap medium for simple replacement of devices in the event of a
fault; for storing configuration data;
can be used in SIMATIC NET
products with PLUG compartment
Power supply PS791-2DC
6GK5791-2DC00-0AA0
24 V DC power supply for installation in SCALANCE W786 products;
operating instructions
in German/English
Power supply PS791-2AC
6GK5791-2AC00-0AA0
110 V AC to 230 V AC power supply
for installation in the
SCALANCE W786 products;
operating instructions
in German/English
MS1 mounting set
6GK5798-8MG00-0AA0
Mounting set for fixing
SCALANCE W786 products onto an
S7-300 mounting rail or a
35 mm standard DIN rail
Antennas and miscellaneous
IWLAN accessories
See Industrial Wireless LAN/
accessories
SFP plug-in transceiver
SFP992-1
Gigabit, multimode, 750 m
6GK5992-1AL00-8AA0
SFP992-1LD
Gigabit, singlemode, 10 km
6GK5992-1AM00-8AA0
SFP992-1LH
Gigabit, singlemode, 40 km
6GK5992-1AN00-8AA0
SFP992-1LH+
Gigabit, singlemode, 70 km
6GK5992-1AP00-8AA0
Fiber-optic cables
see Glass fiber-optic cables
1)
Please note national approvals under
http://www.siemens.com/wireless-approvals
6/46
Siemens IK PI · 2015
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Access Points IEEE 802.11n
SCALANCE W774 RJ45 for use in control cabinet
• Access points in SIMATIC design suitable for applications
where the device is to be mounted in the control cabinet
■ Design
• Low-profile, compact aluminum enclosure, shock and
vibration-proof for high mechanical requirements
• Implementation of simple and cost-effective wireless machine
networking
• Support of the 2.4 and 5 GHz frequency band
• IP30 protection
• For use at ambient temperatures from -20 °C to +60 °C
• 2 x R-SMA sockets for the connection of direct mountable and
remote antennas
• Antenna placement optimized for the 2x2 MIMO technology;
the antennas do not interfere with each other when they are
mounted directly on the device
• 2 x RJ45 connector for 10/100 Mbit/s, of which one connector
has Power-over-Ethernet compliant with IEEE 802.3at
• 2 x 24 V DC connection for redundant energy supply
• 1 x PLUG compartment for KEY-PLUG/C-PLUG
• Function LEDs for optical signaling of faults/errors and
operating statuses
• Mounting: Wall, S7-1500 mounting rail, S7-300 mounting rail,
or on 35 mm standard mounting rail
• SIMATIC design matches existing components in the control
cabinet (e.g. S7-1500, …)
PLUG slot and
reset button
24 V DC connection
2x antenna connections
R-SMA (female)
2x RJ45 connection
10/100 Mbit/s with
integrated 2 port
switch;
1 port supports PoE
IEEE 802.3at
6
n†prXW††ZWZZY
■ Overview
Design and interfaces of the SCALANCE W774 RJ45 access points
Product versions
SCALANCE W774-1 RJ45
• A radio card is permanently installed; functional scope can be
expanded by using a KEY-PLUG W780 iFeatures
Siemens IK PI · 2015
6/47
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Access Points IEEE 802.11n
SCALANCE W774 RJ45 for use in control cabinet
■ Function
Radio cell
RCoax Cable
Access Point
SCALANCE W774-1 RJ45
+ KEY-PLUG W780 iFeatures
Antenna
ANT792-4DN
6
Integration of an automated guided vehicle system using iPCF with SCALANCE W774-1 RJ45 and KEY-PLUG W780 iFeatures
6/48
Siemens IK PI · 2015
G_IK10_XX_30171
Hanger 5
Hanger 4
Hanger 3
Hanger 2
Hanger 1
Client Module SCALANCE W734-1 RJ45
+ KEY-PLUG W740 iFeatures
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Access Points IEEE 802.11n
SCALANCE W774 RJ45 for use in control cabinet
■ Technical specifications
Article No.
6GK5774-1FX00-0AA0
6GK5774-1FX00-0AB01)
Product-type designation
SCALANCE W774-1 RJ45
300 Mbit/s
10 … 100 Mbit/s
-
Interfaces
Number of electrical connections
• for network components
and terminal equipment
• for power supply
• for redundant power supply
Design of the electrical connection
• for network components
and terminal equipment
• for power supply
2
1
1
RJ45 socket
4-pole screw terminal, PoE
Number of optical interfaces
for optical waveguide at 100 Mbit/s
-
Design of optical interface
for optical waveguide at 100 Mbit/s
-
design of the removable storage
C-PLUG
Yes
Interfaces wireless
Number of radio cards permanently
installed
1
Number of internal antennas
-
Number of electrical connections for
external antenna(s)
2
Yes
Signal-Inputs/outputs
Number of digital inputs
-
Number of digital outputs
-
Design of electrical connection
at the digital inputs/outputs
-
Signal range
• at digital input
• at the digital output
Product-type designation
SCALANCE W774-1 RJ45
Type of supply voltage
Supply voltage
• 1 from terminal block
• 2 from terminal block
• from Power-over-Ethernet
according IEEE802.3at for type 1
and IEEE802.3af
• from Power-over-Ethernet
according IEEE802.3at for type 2
DC
19.2 V
28.8 V
48 V
-
Current consumed
• at 24 V with DC typical
0.25 A
• with Power-over-Ethernet
0.125 A
according to IEEE802.3at for type 1
and IEEE802.3af typical
• with Power-over-Ethernet according to IEEE802.3at for type 2 typical
Effective power loss
• at 24V for DC typical
6W
6W
• with Power-over-Ethernet
according to IEEE802.3at for type 1
and IEEE802.3af typical
• with Power-over-Ethernet according to IEEE802.3at for type 2 typical
6
Permitted ambient conditions
Design of the electrical connection for R-SMA (socket)
external antenna(s)
Product property external antenna
can be mounted directly on device
6GK5774-1FX00-0AA0
6GK5774-1FX00-0AB01)
Supply voltage,
current consumption, power loss
Transmission rate
Transmission rate
• with W-LAN maximum
• with Industrial Ethernet
• note
Article No.
-
Ambient temperature
• during operating
• during storage
• during transport
-20 … +60 °C
-40 … +85 °C
-40 … +85 °C
Relative humidity at 25 °C without
condensation during operating
maximum
97 %
Protection class IP
IP30
Ambient condition for (standard)
operation mode
When used under hazardous
conditions (Zone 2), the SCALANCE
W774-1 RJ45 or W734-1 RJ45 product must be installed in an enclosure.
To comply with EN 50021, this
enclosure must meet the requirements of at least IP54 in compliance
with EN 60529.
Design, dimensions and weight
Width of enclosure without antenna
26 mm
Height of enclosure without antenna
147 mm
Depth of enclosure without antenna
127 mm
Net weight
0.52 kg
Mounting type wall mounting
Yes
Mounting type
Wall mounting only if flat mounted
Wireless frequencies
Radio frequency
• for WLAN in 2.4 GHz
frequency band
• for WLAN in 5 GHz
frequency band
2.41 … 2.48 GHz
4.9 … 5.8 GHz
Siemens IK PI · 2015
6/49
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Access Points IEEE 802.11n
SCALANCE W774 RJ45 for use in control cabinet
■ Technical specifications (continued)
Article No.
6GK5774-1FX00-0AA0
6GK5774-1FX00-0AB01)
Product-type designation
SCALANCE W774-1 RJ45
Product properties, functions,
components general
Yes
Yes
Number of SSIDs
4
Number of iPCF-capable radio
modules
in preparation
in preparation
in preparation
1
Product functions management,
configuration
Number of manageable IP addresses 8
in client
6
Product function
• CLI
• web-based management
• MIB support
• TRAPs via email
• Configuration with STEP 7
• configuration with STEP 7
in the TIA Portal
• operation with IWLAN controller
• operation with Enterasys WLAN
controller
• forced roaming with IWLAN
• WDS
Protocol is supported
• Address Resolution Protocol (ARP)
• ICMP
• Telnet
• HTTP
• HTTPS
• TFTP
• SNMP v1
• SNMP v2
• SNMP v3
• DCP
• LLDP
Yes
Yes
Yes
Yes
in preparation
in preparation
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Identification & maintenance function
• I&M0 - device-specific information Yes
• I&M1 – higher level designation/
Yes
location designation
Product functions Diagnosis
Product function
• PROFINET IO diagnosis
• localization via Aeroscout
• SysLog
in preparation
in preparation
Yes
Product functions VLAN
Product function function VLAN
with IWLAN
6GK5774-1FX00-0AA0
6GK5774-1FX00-0AB01)
Product-type designation
SCALANCE W774-1 RJ45
Product functions DHCP
Product function
• Access Point Mode
• Client Mode
Product function
• iPCF Access Point
• iPCF client
• iPCF-MC Access Point
• iPCF-MC client
Article No.
Product function
• DHCP client
Yes
• in Client Mode DHCP server via LAN No
Product functions Redundancy
Protocol is supported STP/RSTP
-
Product functions Security
Product function
• ACL - MAC-based
• Management security, ACL-IP based
• IEEE 802.1x (radius)
• NAT/NAPT
• access protection
according to IEEE802.11i
• WPA/WPA2
• TKIP/AES
Protocol is supported SSH
No
Yes
Yes
No
Yes
Yes
Yes
Yes
Product functions Time
Protocol is supported
• SNTP
• SIMATIC Time
Yes
Yes
Standards, specifications,
approvals
Standard
• for EMC from FM
• for hazardous zone
• for safety of CSA and UL
• for hazardous area of CSA and UL
Verification of suitability
• CE mark
• EC declaration of conformity
• C-Tick
• CCC
• Railway application in accordance
with EN 50155
• e1 approval
• E1 approval
• NEMA4X
• Power-over-Ethernet
according IEEE802.3at for type 1
and IEEE802.3af
• Power-over-Ethernet
according to IEEE802.3at for type 2
Standard for wireless communication
• IEEE 802.11a
• IEEE 802.11b
• IEEE 802.11e
• IEEE 802.11g
• IEEE 802.11h
• IEEE 802.11i
• IEEE 802.11n
Wireless approval
Yes
in preparation
Yes
Yes
Yes
-
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
You will find the current list
of countries at:
www.siemens.com/wireless-approvals
Accessories
Accessories
1)
6/50
Siemens IK PI · 2015
Wireless approval in the USA
24 V DC screw terminal included
in scope of delivery
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Access Points IEEE 802.11n
SCALANCE W774 RJ45 for use in control cabinet
■ Ordering data
Article No.
■ More information
SCALANCE W774 access points
Selection tools:
IWLAN access points with built-in
wireless interface for establishing
wireless connections with iFeatures;
wireless networks
IEEE 802.11a/b/g/h/n at 2.4/5 GHz
up to 300 Mbit/s; WPA2/AES;
integrated 2-port switch;
Power over Ethernet (PoE),
IP30 degree of protection
(-20 °C to +60 °C);
scope of delivery:
Mounting hardware,
4-pin screw terminal for 24V DC;
manual on CD-ROM;
German/English
To assist in selecting Industrial Ethernet components, the TIA
Selection Tool is available at:
http://www.siemens.com/tia-selection-tool
Wireless approvals:
Current approvals can be found on the Internet at:
http://www.siemens.com/wireless-approvals
SCALANCE W774-1 RJ45
IWLAN Access Point with one
built-in wireless interface
• National approvals
for operation outside the USA
• National approvals
for operation within the USA 1)
6GK5774-1FX00-0AA0
6GK5774-1FX00-0AB0
Accessories
KEY-PLUG W780 iFeatures
6GK5907-8PA00
Swap medium for enabling additional iFeatures, for simple device
replacement if a fault occurs and for
storage of configuration data;
can be used in SCALANCE W
access points with PLUG compartment
C-PLUG
6
6GK1900-0AB00
Swap medium for simple replacement of devices if a fault occurs;
for storing configuration data;
can be used in SIMATIC NET products with PLUG compartment
IE FC RJ45 Plug 180 2 x 2
RJ45 plug connector for Industrial
Ethernet with a rugged metal enclosure and integrated insulationdisplacement contacts for connecting Industrial Ethernet FC
installation cables;
with a 180° cable outlet;
for network components
and CPs/CPUs with Industrial
Ethernet interface
• 1 pack = 1 unit
• 1 pack = 10 units
• 1 pack = 50 units
6GK1901-1BB10-2AA0
6GK1901-1BB10-2AB0
6GK1901-1BB10-2AE0
IE FC Standard Cable GP 2 x 2
6XV1840-2AH10
4-core, shielded TP installation
cable for connection to IE FC outlet
RJ45 plug / IE FC RJ45 plug;
PROFINET-compliant;
with UL approval;
sold by the meter;
max. quantity 1 000 m,
minimum order 20 m
IE FC Stripping Tool
6GK1901-1GA00
Preadjusted stripping tool
for fast stripping of the Industrial
Ethernet FC cables
Antennas and miscellaneous
IWLAN accessories
1)
See Industrial Wireless
LAN/accessories
Please note national approvals under
http://www.siemens.com/wireless-approvals
Siemens IK PI · 2015
6/51
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Access Points IEEE 802.11n
SCALANCE W774 M12 EEC for enhanced environmental conditions
■ Design
• Suitable for use in industrial and automation applications
in general, but especially in railway applications where the
device is to be mounted in the control cabinet
• Low-profile, compact aluminum enclosure, shock and
vibration-proof for high mechanical requirements
• Special coating of the printed circuit boards (conformal
coating)
• Resistant to condensation
• Railroad approval in accordance with EN 50155
• IP30 degree of protection
• For use at ambient temperatures from -20 °C to +60 °C
• Support of the 2.4 and 5 GHz frequency band
• 2 x R-SMA sockets for the connection of direct mountable and
remote antennas
• Antenna placement optimized for the 2x2 MIMO technology;
the antennas do not interfere with each other when they are
mounted directly on the device
• 2 x M12 connection for 10/100 Mbit/s, of which one
connection with Power-over-Ethernet according to
IEEE 802.3at
• 1 x M12 socket for power supply (24 V DC)
• 1 x PLUG compartment (KEY-PLUG/C-PLUG)
• Function LEDs for optical signaling of faults/errors and
operating statuses
• Mounting: Wall, S7-1500 mounting rail, S7-300 mounting rail,
or on 35 mm standard mounting rail
PLUG slot and
reset button
6
24 V DC connection
2x antenna connections
R-SMA (female)
2x M12 connection
10/100 Mbit/s with
integrated 2 port
switch;
1 port supports PoE
IEEE 802.3at
n†prXW††ZWZ[\
■ Overview
Design and interfaces of the SCALANCE W774 M12 EEC access points
Product version
SCALANCE W774-1 M12 EEC
• A radio card is permanently installed; functional scope can be
expanded by using a KEY-PLUG W780 iFeatures
6/52
Siemens IK PI · 2015
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Access Points IEEE 802.11n
SCALANCE W774 M12 EEC for enhanced environmental conditions
■ Function
The SCALANCE W774 M12 EEC (Extended Environmental
Conditions) are designed for use in railway applications.
The devices satisfy EN 50155, the approval for railway applications, and can thus be used for rail traffic. Combined with the
antennas approved for railway applications, which are connected via R-SMA antenna connectors (female), these products
can set up a reliable IWLAN wireless infrastructure.
The devices can be installed at the location that is most
favorable for the wireless link. The enclosure and the connectors
are resistant to high levels of shock and vibration because all
the connectors are screwed or locked. The SCALANCE W774
M12 EEC is well suited to environments in which a compact
design plays a large role. Through its coated printed-circuit
Tablet,
smartphone or
laptop
boards (Conformal Coating), the module is resistant to condensation caused by use in environments with large temperature
variations.
SCALANCE W774-1 M12 EEC access points can also be
operated as client modules.
Provided that a delay (several 100 ms) caused by roaming in
accordance with IEEE 802.11 is tolerated by all communication
stations when switching the radio cells, the communication
continues uninterrupted.
For real-time requirements, the SCALANCE W774-1 M12 EEC
can be equipped with KEY-PLUG functionality for activating
iFeatures.
ANT 795-6MN
SCALANCE W774-1
M12 EEC
Industrial Ethernet
G_IK10_XX_30338
Passenger
Data transfer in trains with SCALANCE W774-1 M12 EEC
Siemens IK PI · 2015
6/53
6
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Access Points IEEE 802.11n
SCALANCE W774 M12 EEC for enhanced environmental conditions
■ Technical specifications
Article No.
6GK5774-1FY00-0TA0
6GK5774-1FY00-0TB01)
Article No.
6GK5774-1FY00-0TA0
6GK5774-1FY00-0TB01)
Product-type designation
SCALANCE W774-1 M12 EEC
Product-type designation
SCALANCE W774-1 M12 EEC
300 Mbit/s
10 … 100 Mbit/s
-
Effective power loss
• at 24V for DC typical
• with Power-over-Ethernet
according to IEEE802.3at for type 1
and IEEE802.3af typical
• with Power-over-Ethernet
according to IEEE802.3at
for type 2 typical
Transmission rate
Transmission rate
• with W-LAN maximum
• with Industrial Ethernet
• note
Interfaces
Number of electrical connections
• for network components
and terminal equipment
• for power supply
• for redundant power supply
Design of electrical connection
• for network components
and terminal equipment
• for power supply
2
Permitted ambient conditions
1
1
Ambient temperature
• during operating
• during storage
• during transport
M12 interface (4-pole, D-coded),
PoE
M12 interface (4-pole, A-coded)
Relative humidity at 25 °C without
condensation during operating
maximum
Number of optical interfaces
for optical waveguide at 100 Mbit/s
-
Protection class IP
Design of optical interface
for optical waveguide at 100 Mbit/s
-
Ambient condition for (standard)
operation mode
design of the removable storage
C-PLUG
Yes
Interfaces wireless
6
Number of radio cards permanently
installed
1
Number of internal antennas
Number of electrical connections
for external antenna(s)
26 mm
147 mm
2
Depth of enclosure without antenna
127 mm
Yes
Signal-Inputs/outputs
-
Number of digital outputs
-
Design of electrical connection
at the digital inputs/outputs
-
Mounting type wall mounting
Yes
Mounting type
Wall mounting only if flat mounted
Radio frequency
• for WLAN in 2.4 GHz
frequency band
• for WLAN in 5 GHz
frequency band
2.41 … 2.48 GHz
4.9 … 5.8 GHz
Product properties, functions,
components general
-
Product function
• Access Point Mode
• Client Mode
Yes
Yes
Number of SSIDs
4
19.2 V
28.8 V
48 V
Product function
• iPCF Access Point
• iPCF client
• iPCF-MC Access Point
• iPCF-MC client
in preparation
in preparation
in preparation
-
Number of iPCF-capable radio
modules
Supply voltage,
current consumption, power loss
DC
Current consumed
• at 24 V with DC typical
• with Power-over-Ethernet
according to IEEE802.3at for type 1
and IEEE802.3af typical
• with Power-over-Ethernet
according to IEEE802.3at
for type 2 typical
Siemens IK PI · 2015
Net weight
Wireless frequencies
Number of digital inputs
6/54
Design, dimensions and weight
Height of enclosure without antenna
Product property external antenna
can be mounted directly on device
Supply voltage
• 1 from terminal block
• 2 from terminal block
• from Power-over-Ethernet
according IEEE802.3at for type 1
and IEEE802.3af
• from Power-over-Ethernet
according IEEE802.3at for type 2
When used under hazardous
conditions (Zone 2), the SCALANCE
W774-1 M12 EEC product must be
installed in an enclosure. To comply
with EN 50021, this enclosure must
meet the requirements of at least IP54
in compliance with EN 60529.
-
R-SMA (socket)
Type of supply voltage
100 %
Width of enclosure without antenna
Design of the electrical connection
for external antenna(s)
Signal range
• at digital input
• at the digital output
-20 ... +60 °C
-40 ... +85 °C
-40 ... +85 °C
1
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Access Points IEEE 802.11n
SCALANCE W774 M12 EEC for enhanced environmental conditions
■ Technical specifications (continued)
Article No.
6GK5774-1FY00-0TA0
6GK5774-1FY00-0TB01)
Product-type designation
SCALANCE W774-1 M12 EEC
Number of manageable IP addresses 8
in client
Protocol is supported
• Address Resolution Protocol (ARP)
• ICMP
• Telnet
• HTTP
• HTTPS
• TFTP
• SNMP v1
• SNMP v2
• SNMP v3
• DCP
• LLDP
Yes
Yes
Yes
Yes
in preparation
in preparation
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Identification & maintenance function
• I&M0 - device-specific information Yes
Yes
• I&M1 – higher level designation/
location designation
Product functions Diagnosis
Product function
• PROFINET IO diagnosis
• localization via Aeroscout
• SysLog
Product-type designation
SCALANCE W774-1 M12 EEC
Protocol is supported
• SNTP
• SIMATIC Time
Yes
Yes
Standards, specifications,
approvals
Standard
• for EMC from FM
• for hazardous zone
• for safety of CSA and UL
• for hazardous area of CSA and UL
Verification of suitability
• CE mark
• EC declaration of conformity
• C-Tick
• CCC
• Railway application in accordance
with EN 50155
• e1 approval
• E1 approval
• NEMA4X
• Power-over-Ethernet
according IEEE802.3at for type 1
and IEEE802.3af
• Power-over-Ethernet
according to IEEE802.3at for type 2
Standard for wireless communication
• IEEE 802.11a
• IEEE 802.11b
• IEEE 802.11e
• IEEE 802.11g
• IEEE 802.11h
• IEEE 802.11i
• IEEE 802.11n
Wireless approval
in preparation
in preparation
Yes
in preparation
in preparation
in preparation
Yes
Yes
Yes
in preparation
Yes
Yes
6
Yes
Yes
Yes
Yes
Yes
Yes
Yes
You will find the current list
of countries at:
www.siemens.com/wireless-approvals
Accessories
Accessories
Product functions VLAN
Product function function VLAN
with IWLAN
6GK5774-1FY00-0TA0
6GK5774-1FY00-0TB01)
Product functions Time
Product functions management,
configuration
Product function
• CLI
• web-based management
• MIB support
• TRAPs via email
• Configuration with STEP 7
• configuration with STEP 7
in the TIA Portal
• operation with IWLAN controller
• operation with Enterasys WLAN
controller
• forced roaming with IWLAN
• WDS
Article No.
-
Yes
Product functions DHCP
Product function
• DHCP client
• in Client Mode DHCP server
via LAN
Yes
No
Product functions Redundancy
Protocol is supported STP/RSTP
Yes
Product functions Security
Product function
• ACL - MAC-based
• Management security,
ACL-IP based
• IEEE 802.1x (radius)
• NAT/NAPT
• access protection
according to IEEE802.11i
• WPA/WPA2
• TKIP/AES
Protocol is supported SSH
No
Yes
Yes
No
Yes
Yes
Yes
Yes
1)
Wireless approval in the USA
Siemens IK PI · 2015
6/55
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Access Points IEEE 802.11n
SCALANCE W774 M12 EEC for enhanced environmental conditions
■ Ordering data
Article No.
SCALANCE W774 M12 EEC Access Points
Selection tools:
IWLAN Access Points
with built-in wireless interface;
wireless networks
IEEE 802.11a/b/g/h/n at 2.4/5 GHz
up to 300 Mbit/s;
railway approval in accordance
with EN 50155;
conformal coating;
WPA2/AES;
Power over Ethernet (PoE),
IP20 degree of protection;
scope of delivery:
Mounting hardware;
manual on CD-ROM,
German/English
To assist in selecting Industrial Ethernet components, the TIA
Selection Tool is available at:
http://www.siemens.com/tia-selection-tool
Wireless approvals:
Current approvals can be found on the Internet at:
http://www.siemens.com/wireless-approvals
SCALANCE W774-1 M12 EEC
IWLAN Access Point with one
integrated wireless interface
• National approvals
for operation outside the USA
• National approvals
for operation within the USA 1)
6GK5774-1FY00-0TA0
6GK5774-1FY00-0TB0
Accessories
KEY-PLUG W780 iFeatures
6
■ More information
6GK5907-8PA00
Swap medium for enabling
additional iFeatures, for simple
device replacement if a fault occurs
and for storage of configuration
data;
Can be used in SCALANCE W
access points with PLUG compartment
C-PLUG
6GK1900-0AB00
Swap medium for simple replacement of devices in the event of a fault;
for storing configuration data;
can be used in SIMATIC NET
products with PLUG compartment
IE FC M12 Plug PRO 2 x 2
M12 plug-in connector (D-coded,
IP65/IP67) that can be assembled in
the field, metal enclosure,
FastConnect connection method,
for SCALANCE W774-1 M12 EEC
• 1 unit
• 8 units
IE FC Standard Cable GP 2 x 2 /
Type A
6GK1901-0DB20-6AA0
6GK1901-0DB30-6AA8
6XV1840-2AH10
4-core, shielded TP installation
cable for connection to IE
FC Outlet RJ45/ IE FC RJ45 Plug;
PROFINET-compatible;
with UL approval;
sold by the meter;
max. length 1 000 m,
minimum order 20 m
IE FC Stripping Tool
6GK1901-1GA00
Preadjusted stripping tool
for fast stripping of the Industrial
Ethernet FC cables
Power M12 Cable Connector PRO
6GK1907-0DC10-6AA3
Terminal socket for connection of
SCALANCE W700 for 24 V DC
supply voltage; 4-pole, A-coded,
with assembly instructions, 3 units
Power Cable 2 x 0.75
6XV1812-8A
Connecting cable for Power M12
Cable Connector PRO,
sold by the meter
Antennas and miscellaneous
IWLAN accessories
1)
See Industrial Wireless LAN/
accessories
Please note national approvals under
http://www.siemens.com/wireless-approvals
6/56
Siemens IK PI · 2015
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Access Points IEEE 802.11n
SCALANCE W761 RJ45 for the Control Cabinet
■ Overview
■ Design
• Compact design for space-saving installation in control
cabinets or boxes on a standard mounting rail
• Implementation of simple and cost-effective wireless machine
networking
• Support of the 2.4 and 5 GHz frequency band
• Degree of protection IP20
• For use at ambient temperatures from 0 °C to +55 °C
• 1 x R-SMA socket for the connection of a remote antenna
• 1 x RJ45 port for 10/100 Mbit/s
• 1 x 24 V DC connection
• Function LEDs for optical signaling of faults/errors and
operating statuses
• SIMATIC design matches existing components in the control
cabinet (e.g. ET 200SP, etc.)
• Low-cost Access Point, suitable for applications where the
device is to be mounted in the control cabinet
24 V DC connection
(rear)
6
Reset button
RJ45 connection for
10/100 Mbit/s (front)
n†prXW††ZWZZX
1 x antenna connection
R-SMA (female)
Design and interfaces of the SCALANCE W761 RJ45 access points
Product versions
SCALANCE W761-1 RJ45
• A wireless card permanently installed in the device
Siemens IK PI · 2015
6/57
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Access Points IEEE 802.11n
SCALANCE W761 RJ45 for the Control Cabinet
■ Integration
Antenna
ANT793-4MN
Antenna
ANT793-4MN
IWLAN RCoax
radiating cable
Antenna
ANT793-4MN
Storage retrieval
machine
SCALANCE
W721-1 RJ45
and ET 200SP
IWLAN RCoax
radiating cable
Storage retrieval
machine
SCALANCE
W721-1 RJ45
and ET 200SP
IWLAN RCoax
radiating cable
Control cabinet
6
Central control unit
SIMATIC ET 200S with
SCALANCE W761-1 RJ45
and SCALANCE XB005
Storage retrieval
machine
SCALANCE
W721-1 RJ45
and ET 200SP
IWLAN RCoax
radiating cable
Antenna
cable
Antenna
cable
Antenna
cable
SCALANCE
W761-1 RJ45
SCALANCE
W761-1 RJ45
SCALANCE
W761-1 RJ45
Industrial Ethernet/PROFINET
Storage and retrieval machines in high-bay warehouses automated with SCALANCE W721-1 RJ45, W761-1 RJ45 and RCoax
6/58
Siemens IK PI · 2015
G_IK10_XX_30334
Storage retrieval
machine
SCALANCE
W721-1 RJ45
and ET 200SP
Antenna
cable
Antenna
ANT793-4MN
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Access Points IEEE 802.11n
SCALANCE W761 RJ45 for the Control Cabinet
■ Technical specifications
Article no.
6GK5761-1FC00-0AA0
6GK5761-1FC00-0AB01)
Product-type designation
SCALANCE W761-1 RJ45
150 Mbit/s
10 … 100 Mbit/s
Interfaces
Number of electrical connections
• for network components and
terminal equipment
• for power supply
• for redundant power supply
Design of electrical connection
• for network components and
terminal equipment
• for power supply
Number of optical interfaces for
optical waveguide at 100 Mbit/s
1
1
0
SCALANCE W761-1 RJ45
Ambient temperature
• during operating
• during storage
• during transport
95 %
Protection class IP
IP20
Ambient condition for (standard)
operation mode
When used under hazardous
conditions (Zone 2), the SCALANCE
W761-1 RJ45 or W72x-1 RJ45
product must be installed in an
enclosure. To comply with EN 50021,
this enclosure must meet the requirements of at least IP54 in compliance
with EN 60529.
-
No
1
0 … 55 °C
-40 … +85 °C
-40 … +85 °C
Relative humidity at 25 °C without
condensation during operating
maximum
3-pole screw terminal
Interfaces wireless
Number of radio cards permanently
installed
Product-type designation
RJ45 socket
Design of optical interface for optical waveguide at 100 Mbit/s
design of the removable storage
C-PLUG
6GK5761-1FC00-0AA0
6GK5761-1FC00-0AB01)
Permitted ambient conditions
Transmission rate
Transmission rate
• with W-LAN maximum
• for Industrial Ethernet
Article no.
Design, dimensions and weight
Width of enclosure without antenna
50 mm
Height of enclosure without antenna
114 mm
Depth of enclosure without antenna
74 mm
Net weight
0.13 kg
Mounting type wall mounting
No
Number of internal antennas
-
Wireless frequencies
Number of electrical connections for
external antenna(s)
1
Radio frequency
• for WLAN in 2.4 GHz frequency
2.41 … 2.48 GHz
band
• for WLAN in 5 GHz frequency band 4.9 … 5.8 GHz
Design of the electrical connection for R-SMA (socket)
external antenna(s)
Product property external antenna
can be mounted directly on device
Yes
Supply voltage, current
consumption, power loss
Type of supply voltage
Supply voltage
• 1 from terminal block
• 2 from terminal block
• from Power-over-Ethernet according
IEEE802.3at for type 1 and
IEEE802.3af
• from Power-over-Ethernet according
IEEE802.3at for type 2
DC
19.2 V
28.8 V
-
-
6
Product properties, functions,
components general
Product function
• Access Point Mode
• Client Mode
Yes
Yes
Number of SSIDs
1
Product function
• iPCF Access Point
• iPCF client
• iPCF-MC Access Point
• iPCF-MC client
No
No
No
No
Number of iPCF-capable radio
modules
0
Current consumed
• at 24 V with DC typical
0.15 A
• with Power-over-Ethernet according to IEEE802.3at for type 1 and
IEEE802.3af typical
• with Power-over-Ethernet according to IEEE802.3at for type 2 typical
Effective power loss
• at 24V for DC typical
3.6 W
• with Power-over-Ethernet according to IEEE802.3at for type 1 and
IEEE802.3af typical
• with Power-over-Ethernet according to IEEE802.3at for type 2 typical
Siemens IK PI · 2015
6/59
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Access Points IEEE 802.11n
SCALANCE W761 RJ45 for the Control Cabinet
■ Technical specifications (continued)
Article no.
6GK5761-1FC00-0AA0
6GK5761-1FC00-0AB01)
Product-type designation
SCALANCE W761-1 RJ45
Product functions management,
configuration
6
Protocol is supported
• Address Resolution Protocol (ARP)
• ICMP
• Telnet
• HTTP
• HTTPS
• TFTP
• SNMP v1
• SNMP v2
• SNMP v3
• DCP
• LLDP
Yes
Yes
Yes
Yes
in preparation
in preparation
Product-type designation
SCALANCE W761-1 RJ45
Product function
• ACL - MAC-based
• Management security,
ACL-IP based
• IEEE 802.1x (radius)
• NAT/NAPT
• access protection
according to IEEE802.11i
• WPA/WPA2
• TKIP/AES
Protocol is supported SSH
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Identification & maintenance function
• I&M0 - device-specific information Yes
Yes
• I&M1 – higher level designation/
location designation
Product functions Diagnosis
Product function
• PROFINET IO diagnosis
• localization via Aeroscout
• SysLog
6GK5761-1FC00-0AA0
6GK5761-1FC00-0AB01)
Product functions Security
Number of manageable IP addresses 4
in client
Product function
• CLI
• web-based management
• MIB support
• TRAPs via email
• Configuration with STEP 7
• configuration with STEP 7
in the TIA Portal
• operation with IWLAN controller
• operation with Enterasys WLAN
controller
• forced roaming with IWLAN
• WDS
Article no.
in preparation
No
Yes
Protocol is supported
• SNTP
• SIMATIC Time
Standard
• for EMC from FM
• for hazardous zone
• for safety of CSA and UL
• for hazardous area of CSA and UL
Verification of suitability
• CE mark
• EC declaration of conformity
• C-Tick
• CCC
• Railway application in accordance
with EN 50155
• e1 approval
• E1 approval
• NEMA4X
• Power-over-Ethernet according
IEEE802.3at for type 1 and
IEEE802.3af
• Power-over-Ethernet according to
IEEE802.3at for type 2
Product functions Redundancy
Wireless approval
Product functions DHCP
Protocol is supported STP/RSTP
Yes
Yes
Yes
Yes
Yes
Standards, specifications,
approvals
Product function
• DHCP client
Yes
• in Client Mode DHCP server via LAN No
Yes
Yes
No
Yes
Product functions Time
Standard for wireless communication
• IEEE 802.11a
• IEEE 802.11b
• IEEE 802.11e
• IEEE 802.11g
• IEEE 802.11h
• IEEE 802.11i
• IEEE 802.11n
Product functions VLAN
Product function function VLAN with
IWLAN
No
Yes
-
in preparation
Yes
Yes
Yes
-
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
You will find the current list
of countries at:
www.siemens.com/wireless-approvals
Accessories
Accessories
1)
6/60
Siemens IK PI · 2015
Wireless approval in the USA
24 V DC screw terminal included in
scope of delivery
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Access Points IEEE 802.11n
SCALANCE W761 RJ45 for the Control Cabinet
■ Ordering data
Article No.
■ More information
SCALANCE W761 Access Points
Selection tools:
IWLAN Access Point with
built-in wireless interface;
wireless networks
IEEE 802.11a/b/g/h/n at 2.4/5 GHz
up to 150 Mbit/s;
WPA2/AES;
IP20 degree of protection
(0 °C to +55 °C);
scope of delivery:
Mounting hardware, 3-pin screw
terminal for 24V DC;
manual on CD-ROM;
German/English
To assist in selecting Industrial Ethernet components, the TIA
Selection Tool is available at:
http://www.siemens.com/tia-selection-tool
Wireless approvals:
Current approvals can be found on the Internet at:
http://www.siemens.com/wireless-approvals
SCALANCE W761-1 RJ45
IWLAN Access Point with one built-in
wireless interface
• National approvals
for operation outside the USA
• National approvals
for operation within the USA 1)
6GK5761-1FC00-0AA0
6GK5761-1FC00-0AB0
Accessories
IE FC RJ45 Plug 180 2 x 2
RJ45 plug connector for Industrial
Ethernet with a rugged metal
enclosure and integrated insulationdisplacement contacts for
connecting Industrial Ethernet FC
installation cables;
with a 180° cable outlet;
for network components
and CPs/CPUs with Industrial
Ethernet interface
• 1 pack = 1 unit
• 1 pack = 10 units
• 1 pack = 50 units
6GK1901-1BB10-2AA0
6GK1901-1BB10-2AB0
6GK1901-1BB10-2AE0
IE FC Standard Cable GP 2 x 2
6XV1840-2AH10
6
4-core, shielded TP installation cable
for connection to IE FC outlet RJ45
plug / IE FC RJ45 plug;
PROFINET-compliant;
with UL approval;
sold by the meter;
max. quantity 1 000 m,
minimum order 20 m
IE FC stripping tool
6GK1901-1GA00
Preadjusted stripping tool
for fast stripping of the Industrial
Ethernet FC cables
Antennas and miscellaneous
IWLAN accessories
1)
See Industrial Wireless LAN/
accessories
Please note national approvals under
http://www.siemens.com/wireless-approvals
Siemens IK PI · 2015
6/61
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Controller and Controller Access Points IEEE 802.11n
Overview
■ Overview
■ Benefits
The network infrastructures in the industrial and office areas are
coming ever-closer together. This applies also in the area of
wireless communication, causing a constant increase in the
number of access points and WLAN clients to be managed.
If such networks are established with a large number of standalone access points, with each one having to be configured
separately, this results in huge costs for initial configuration and
operation.
6
Central wireless LAN controllers enable low-cost, user-friendly
and secure operation of large WLAN infrastructures here.
Management of the WLAN clients connected to such WLANs is
significantly simplified thanks to their division into user groups
with different security policies.
The SCALANCE WLC711 IWLAN Controller is a device for
centralized management (configuration, diagnostics, firmware
updates, access control, security settings, coordination) of a
wireless LAN in the industrial environment.
• Fast establishment of a new WLAN or expansion of an existing
WLAN with the help of the SCALANCE W786C and
SCALANCE W788C controller-based access points
• Parallel operation of different services (e.g. communication
between programmable controllers, Internet access,
Voice-over-IP telephony and video transmission) on the same
controller-based WLAN infrastructure without requiring
additional SSIDs for this purpose.
• Seamless transition between production WLAN and corporate
WLAN
• Simplified commissioning as well as increased reliability and
security thanks to the central management functions of the
IWLAN controller in comparison to a WLAN comprising standalone access points that have to be configured individually
6/62
Siemens IK PI · 2015
• Reduced commissioning overhead and operation of larger
IWLAN installations (up to 48 access points or 96 access
points in redundant mode) thanks to configuring from a central
location
• Investment protection thanks to seamless integration into
existing IWLAN installations or into an existing corporate
WLAN
• Saving on redundant infrastructures (e.g. separate network for
Internet access and voice transmission) thanks to multiple use
of the same infrastructure for different services
• Avoidance of a single point of failure thanks to optional parallel
operation of two controllers; the WLAN remains functional
even if the controller(s) fail(s)
• Increased reliability when operating the IWLAN through
complete, coordinated portfolio of IWLAN Controller
SCALANCE WLC711, industrial access points and
SCALANCE W client modules, as well as the suitable accessories (antennas, connecting cables, power supplies)
• Flexible configuration of networks thanks to the use of an
integrated wireless mesh solution
• Dynamic Radio Management supports the optimal alignment
of the entire WLAN network
• In the controller-based WLAN, the bandwidth or the
assignment of the access points can be automatically
influenced by the IWLAN Controller SCALANCE WLC711
depending on the requirements. This ensures optimal
utilization of the WLAN by the IWLAN client modules.
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Controller and Controller Access Points IEEE 802.11n
Overview
■ Application
Office network
Plant network
Seamless roaming between office- and plant networks
WLAN
telephone
SCALANCE
WLC711
IWLAN Controller
S7-300 with
CP 343-1
Enterasys
AP3705
(IEEE
802.11a/b/g)
Smartphone
Industrial Ethernet
Network
management
Enterasys
AP3710i
(IEEE
802.11a/b/g/n)
SCALANCE
W786C-2 RJ45
(IEEE 802.11a/b/g/n)
IP telephone
SCALANCE
W788C
(IEEE 802.11a/b/g/n)
Router
Database
SCALANCE
W748-1 RJ45
Laptop
Enterasys Wireless Controller
S7-300 with CP 343-1
G_IK10_XX_30175
Ethernet
IP telephone
system
Company-wide WLAN based on Extreme Networks (Enterasys) Wireless Controller and SCALANCE WLC711 IWLAN controller
The SCALANCE WLC711 IWLAN controller is the optimum solution for IWLAN installations with up to 48 access points (in redundant mode even up to 96 access points). By using SCALANCE
W access points and client modules, different applications in the
industrial environment or a comparable environment can communicate via a centrally managed IWLAN. SCALANCE W access points for controller operation are available for use both
outdoors and for cabinet-free use in an industrial environment
(e.g. on the shop floor).
The SCALANCE WLC711 IWLAN controller can be integrated in
the corporate WLAN and allows the implementation of a WLAN
throughout the office, outdoor and industrial areas. This allows
use of mobile WLAN phones, laptops, smart phones and tablets
in the same wireless network, while complying with security
policies for different user groups, and guaranteeing defined
quality of service (QoS) for different devices.
Siemens IK PI · 2015
6/63
6
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Controller and Controller Access Points IEEE 802.11n
Overview
■ Application (continued)
Application examples
With the SCALANCE WLC711 IWLAN controller, the benefits of a
controller solution, long-familiar in corporate networks, now also
become available for typical industrial and industry-related
applications:
2 x SCALANCE WLC711 in redundancy mode,
each licensed for up to 48 access points
(tunnel 1 and tunnel 2)
• Plant-wide wireless infrastructures in factory automation and
process automation, e.g. for mobile operator control or
logistics applications
• Industry-related applications, e.g. container terminals,
road or underground rail tunnels, where IWLAN is required for
transmitting visualization, video, and voice data
Industrial Ethernet
2
1
16
...
SCALANCE
W786C
SCALANCE XR324-12M
1
SCALANCE
W788C
2
16
SCALANCE XR324-12M
6
SCALANCE
W786C
...
1
2
32
...
SCALANCE XR552-12M
SCALANCE
W786C
SCALANCE
W788C
SCALANCE
W786C
SCALANCE XR552-12M
2
32
...
2 x SCALANCE WLC711 in redundancy mode,
each licensed for up to 48 access points
(tunnel 3 and tunnel 4)
SCALANCE WLC711 IWLAN controller in redundancy mode
6/64
Siemens IK PI · 2015
Industrial Ethernet
G_IK10_XX_30274
1
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Controller and Controller Access Points IEEE 802.11n
Overview
■ Function
Fundamental principles of the controller-based Industrial
Wireless LAN
The SCALANCE WLC711 IWLAN controller enables centralized
management of an Industrial Wireless LAN. It automatically
detects new access points, establishes a connection to them,
and manages and coordinates access points and clients.
Thanks to the Layer 3 architecture, access points located in
different Layer 2 subnets can also be managed. This function
allows wireless expansion of an existing Ethernet network without having to make changes to the existing network topology.
■ More information
Supplementary WLAN solutions for office environments can be
found on the Internet at:
http://www.extremenetworks.com
With the IWLAN controller, the IWLAN wireless infrastructure can
be divided into logical, service-based networks (Virtual Network
Services). Different services, security requirements and access
criteria can thus be reliably managed, and different user groups
such as administrators, commissioning engineers, or visitors
can use the same wireless network.
In the same way, different applications such as Voice-over-IP
(VoIP), video and Internet access can use the same infrastructure. The result is optimal capacity utilization of the IWLAN
network.
If applications with high reliability and availability requirements
are to communicate wirelessly, either two IWLAN controllers can
be operated redundantly or the access points can be set up
redundantly (overlapping of the radio links due to two wireless
cards in the device).
In applications where cable connections are not possible or are
only possible with difficulty, the controller-based access points
can be reliably integrated into the network even without a cable
connection. Thanks to the mesh algorithms, the access points
can resume communication in the event of a network error.
6
The controller-based access points of the SCALANCE W780C
series can only be used with the SCALANCE WLC711 IWLAN
controller and can only be configured using this IWLAN controller.
The IWLAN controller connects, manages and coordinates all
access point and clients such that the WLAN environment
appears like several IP subnets with central management.
The individual connections are additionally managed here, and
the stations can therefore move securely and reliably throughout
the entire radio network.
Diagnostics and management functions
As well as centralized management and wireless network configuration, the SCALANCE WLC711 IWLAN controller also offers
error recording, wireless network monitoring, and documentation of network statistics.
Siemens IK PI · 2015
6/65
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Controller and Controller Access Points IEEE 802.11n
SCALANCE WLC711 industrial wireless LAN controller
■ Overview
• Support for up to 48 access points in standard operation
• Support for up to 96 access points in redundant mode with
two IWLAN controllers
• Supplied with license for 16 access points; expandable with
license for 48 access points in standard mode
• Simultaneous support for up to 512 WLAN clients
• Support for up to 8 VNS segments
• Automatic detection of new access points
• Support for the SCALANCE W780C controller-based access
points (IEEE 802.11a/b/g/n)
■ Application
Container terminal
Automation control center
Industrial Ethernet
SCALANCE
W786C-2 RJ45
6
SCALANCE
W786C-2 RJ45
ANT795-6MT
SCALANCE
XR324-12M
IWLAN Controller
SCALANCE WLC711
AGV
ANT795-6MT
SCALANCE
W748-1 RJ45
AGV
ANT795-6MT
ANT795-6MT
W748-1
RJ45
W748-1
RJ45
SCALANCE
W786C-2 RJ45
AGV
AGV
SCALANCE
W786C-2 RJ45
Container ship
AGV = Automated Guided Vehicle
Controller-based IWLAN for applications with a large number of access points, e.g. in a container terminal
6/66
Siemens IK PI · 2015
G_IK10_XX_30273
SCALANCE
W748-1 RJ45
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Controller and Controller Access Points IEEE 802.11n
SCALANCE WLC711 industrial wireless LAN controller
■ Design
• 24 DC power supply
• Enclosure in the design of the SIMATIC Microbox IPC, in
degree or protection IP20 for installation in the control cabinet
• Two 10/100/1 000 Mbit/s electrical RJ45 ports
• DIN rail and wall mounting possible
• Ambient temperature in operation 5 °C to 40 °C
Product versions
SCALANCE WLC711 IWLAN controller
• IWLAN controller licensed for the connection of up to 16
SCALANCE W780C controller-based access points
License key WLC-700
• Capacity upgrade for SCALANCE WLC711 for supporting up
to 16 SCALANCE W780C controller-based access points for a
total of up to 48 controller-based access points.
■ Technical specifications
Article No.
6GK5711-0XC00-1AA0
6GK5711-0XC00-1AB01)
6GK5711-0XC00-1AD02)
Article No.
6GK5711-0XC00-1AA0
6GK5711-0XC00-1AB01)
6GK5711-0XC00-1AD02)
SCALANCE WLC711 (RoW)
Product-type designation
SCALANCE WLC711 (RoW)
Product-type designation
Product description
Supports SCALANCE W786C,
W788C, W786-2HPW access points
Design, dimensions and weight
Acceptability for application
Basic license for 16 access points
pre-installed, expandable with
1 capacity upgrade license key
WLC-700
Transmission rate
Transmission rate with Industrial
Ethernet
10 … 1 000 Mbit/s
Interfaces
Number of electrical connections
• for network components and
terminal equipment
• for power supply
Design of electrical connection
• for network components and
terminal equipment
• for power supply
2
1
RJ45 socket
2-pole screw terminal
Type of supply voltage
DC
Supply voltage 1 from terminal block
24 V
Consumed current at 24 V with DC
typical
4A
Active power loss at 24V for DC
typical
20 W
Permitted ambient conditions
5 … 40 °C
-40 … +60 °C
-40 … +60 °C
Relative humidity at 25 °C without
condensation during operating
maximum
95 %
Protection class IP
IP20
Ambient condition for (standard)
operation mode
-
1)
Wireless approval in the USA
2)
Wireless approval in the JAPAN
262 mm
Height
142 mm
Depth
47 mm
Net weight
2 kg
Mounting type
• 35 mm DIN rail mounting
• wall mounting
Yes
Mounting type
Supply voltage, current
consumption, power loss
Ambient temperature
• during operating
• during storage
• during transport
Width
Wall mounting using the supplied
mounting brackets
Product functions management,
configuration
Product function
• CLI
• web-based management
• MIB support
• WDS
Yes
Yes
Yes
Yes
Protocol is supported
• Address Resolution Protocol (ARP)
• ICMP
• Telnet
• HTTP
• HTTPS
• TFTP
• SNMP v1
• SNMP v2
• SNMP v3
• DCP
• LLDP
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
Product functions Diagnosis
Product function SysLog
Yes
Product functions VLAN
Product function function VLAN
with IWLAN
Yes
Product functions DHCP
Product function
• DHCP client
• in Client Mode DHCP server
via LAN
No
-
Siemens IK PI · 2015
6/67
6
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Controller and Controller Access Points IEEE 802.11n
SCALANCE WLC711 industrial wireless LAN controller
■ Technical specifications (continued)
Article No.
6GK5711-0XC00-1AA0
6GK5711-0XC00-1AB01)
6GK5711-0XC00-1AD02)
Product-type designation
SCALANCE WLC711 (RoW)
Product functions Security
Product function
• ACL - MAC-based
• Management security,
ACL-IP based
• IEEE 802.1x (radius)
• NAT/NAPT
• access protection
according to IEEE802.11i
• WPA/WPA2
• TKIP/AES
Protocol is supported SSH
Yes
No
Yes
Yes
Yes
Yes
Yes
No
No
Product functions IWLAN controller
6
Number of supported access points
• in standard mode with one IWLAN 32
controller
• in redundancy mode with two IWLAN 64
controllers
Number of supported WLAN clients
per IWLAN controller
512
Number of VNS segments per IWLAN 8
controller
Product function
• of the IWLAN controller
•
•
•
•
•
•
•
•
If delivered with basic license,
16 access points can operated in
standard mode and 32 access points
can operate in redundant mode.
A capacity upgrade permits
32 access points in standard mode
and 64 access points in redundant
mode.
Yes
Pre-standard (CAPWAP)
Yes
integrated VLAN-VNS
auto-detection of new access points Yes
Yes
CDR/RADIUS accounting
Dynamic Radio Management
Yes
Yes
VoIP QoS mapping
(DSCP/TCP-on-WMM)
VoIP roaming between IP subnets
Yes
Yes
VoIP roaming between several
IWLAN controllers
Load distribution function
DRM (Dynamic Radio/ RF Management), Packet Fairness, Flexible
Client Access (Airtime Fairness),
Load Balancing, Band-Steering
Backup function
for IWLAN controller
Redundancy mode with two IWLAN
controllers (with capacity upgrade for
both controllers, both controllers can
be operated with 32 access points
each. If one controller fails, the
remaining controller can handle
64 access points.)
Switching function
Traffic bridged at controller/traffic
bridged locally at wireless access
point
Design of interface
for public network access
Internal captive portal
(web redirection)
1)
Wireless approval in the USA
2)
Wireless approval in the JAPAN
6/68
Siemens IK PI · 2015
6GK5711-0XC00-1AA0
6GK5711-0XC00-1AB01)
6GK5711-0XC00-1AD02)
Product-type designation
SCALANCE WLC711 (RoW)
Standards, specifications,
approvals
Product functions Time
Protocol is supported
• NTP
• SNTP
• SIMATIC Time
Article No.
Standard
• for EMC from FM
• for hazardous zone
• for safety of CSA and UL
• for hazardous area of CSA and UL
Verification of suitability
• CE mark
• EC declaration of conformity
• C-Tick
• CCC
• Railway application in accordance
with EN 50155
• e1 approval
• E1 approval
• NEMA4X
• Power-over-Ethernet according
IEEE802.3at for type 1 and
IEEE802.3af
• Power-over-Ethernet according to
IEEE802.3at for type 2
Standard for wireless communication
• IEEE 802.11a
• IEEE 802.11b
• IEEE 802.11e
• IEEE 802.11g
• IEEE 802.11h
• IEEE 802.11i
• IEEE 802.11n
Wireless approval
UL 60950-1 CSA C22.2 No. 60950-1,
UL 508 CAN/CSA C22.2 No. 142
Yes
Yes
Yes
No
No
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
You will find the current list
of countries at:
www.siemens.com/wireless-approvals
Accessories
Accessories
24 V DC screw terminal and
2 mounting brackets included in the
scope of delivery
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Controller and Controller Access Points IEEE 802.11n
SCALANCE WLC711 industrial wireless LAN controller
■ Ordering data
Article No.
Selection tools:
SCALANCE WLC711 IWLAN
controller
IWLAN controller licensed for the
connection of up to 16 SCALANCE
W78xC controller-based access
points
• National approvals
for operation outside
North America, Canada,
and Japan (RoW)
• National approvals
for operation in North America,
including Canada (NAM)1)
• National approvals
for operation in Japan (JP)1)
License key WLC700
Capacity upgrade for
SCALANCE WLC711 for support of
up to 48 SCALANCE W78xC
controller-based access points
■ More information
To assist in selecting Industrial Ethernet components, the TIA
Selection Tool is available at:
http://www.siemens.com/tia-selection-tool
Wireless approvals:
6GK5711-0XC00-1AA0
Current approvals can be found on the Internet at:
http://www.siemens.com/wireless-approvals
6GK5711-0XC00-1AB0
6GK5711-0XC00-1AD0
6GK5907-1SB00
Accessories
IE TP Cord RJ45/RJ45
TP cable 4 x 2
with 2 RJ45 connectors
• 0.5 m
•1m
•2m
•6m
• 10 m
6XV1870-3QE50
6XV1870-3QH10
6XV1870-3QH20
6XV1870-3QH60
6XV1870-3QN10
LOGO!Power 24 V/4 A
6EP1332-1SH52
6
Stabilized power supply;
Input: 100 … 240 V AC,
output: 24 V DC/4 A
1)
Please note national approvals under
http://www.siemens.com/wireless-approvals
Siemens IK PI · 2015
6/69
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Controller and Controller Access Points IEEE 802.11n
SCALANCE W788 RJ45 controller access points for use in control cabinet
■ Overview
■ Design
• Rugged aluminum enclosure, shock and vibration-proof, for
high mechanical requirements
• Dust protection with IP30 degree of protection
• For use at ambient temperatures from -20 °C to +60 °C
• 6 x R-SMA sockets for the connection of direct mountable and
remote antennas
• Antenna placement optimized for the 3x3 MIMO technology;
the antennas do not interfere with each other when they are
mounted directly on the device
• Suitable for 2.4 GHz and 5 GHz
• 1 x RJ45 connector for 10/100/1 000 Mbit/s with Power-overEthernet according to IEEE 802.3at
• 2 x 24 V DC connection for redundant energy supply
• Function LEDs for optical signaling of faults and operating
states
• Mounting: Wall, S7-1500 mounting rail, S7-300 mounting rail,
or on 35 mm standard mounting rail
• SCALANCE W788C-2 RJ45 controller-based access points
can only be operated on the SCALANCE WLC711 IWLAN
Controller
• Suitable for applications where the access point is to be
mounted in the control cabinet
3x R-SMA (female) antenna connections
3x R-SMA
(female)
antenna
connections
24 V DC
connection
RJ45 connection
(Gigabit)
Design and interfaces of the SCALANCE W788C-2 RJ45 controllerbased access points
Product versions
SCALANCE W788C-2 RJ45 (controller-based)
• Two wireless cards permanently installed in the device
6/70
Siemens IK PI · 2015
n†prXW††ZWZ[W
6
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Controller and Controller Access Points IEEE 802.11n
SCALANCE W788 RJ45 controller access points for use in control cabinet
■ Technical specifications
Article No.
6GK5788-2FC00-1AA0
Article No.
6GK5788-2FC00-1AA0
Product-type designation
SCALANCE W788C-2 RJ45
Product-type designation
SCALANCE W788C-2 RJ45
Transmission rate
Transmission rate
• with W-LAN maximum
• with Industrial Ethernet
• note
Supply voltage,
current consumption, power loss
450 Mbit/s
10 … 1 000 Mbit/s
-
Interfaces
Number of electrical connections
• for network components
and terminal equipment
• for power supply
• for redundant power supply
Design of electrical connection
• for network components
and terminal equipment
• for power supply
1
1
1
RJ45 socket
4-pole screw terminal, PoE
Number of optical interfaces
for optical waveguide at 100 Mbit/s
-
Design of optical interface
for optical waveguide at 100 Mbit/s
-
Design of the removable storage
C-PLUG
No
Interfaces wireless
Type of supply voltage
Supply voltage
• 1 from terminal block
• 2 from terminal block
• from Power-over-Ethernet
according IEEE802.3at for type 1
and IEEE802.3af
• from Power-over-Ethernet
according IEEE802.3at for type 2
DC
19.2 V
28.8 V
48 V
50 V
Current consumed
• at 24 V with DC typical
0.63 A
0.22 A
• with Power-over-Ethernet
according to IEEE802.3at for type 1
and IEEE802.3af typical
• with Power-over-Ethernet
0.3 A
according to IEEE802.3at
for type 2 typical
Effective power loss
• at 24V for DC typical
15 W
10.7 W
• with Power-over-Ethernet
according to IEEE802.3at for type 1
and IEEE802.3af typical
• with Power-over-Ethernet
15 W
according to IEEE802.3at
for type 2 typical
Number of radio cards permanently
installed
2
Number of internal antennas
-
Permitted ambient conditions
Number of electrical connections
for external antenna(s)
6
Design of the electrical connection
for external antenna(s)
N-Connect (socket)
Ambient temperature
• during operating
• during storage
• during transport
Product property external antenna
can be mounted directly on device
Yes
6
-20 … +60 °C
-40 … +70 °C
-40 … +70 °C
Relative humidity at 25 °C without
condensation during operating
maximum
90 %
Protection class IP
IP30
Ambient condition for (standard)
operation mode
When used under hazardous
conditions (Zone 2),
the SCALANCE W788-xPRO/RR or
W74x-1PRO/RR product must be
installed in an enclosure. To comply
with EN 50021, this enclosure must
meet the requirements of at least IP54
in compliance with EN 60529.
Siemens IK PI · 2015
6/71
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Controller and Controller Access Points IEEE 802.11n
SCALANCE W788 RJ45 controller access points for use in control cabinet
■ Technical specifications (continued)
Article No.
6GK5788-2FC00-1AA0
Article No.
6GK5788-2FC00-1AA0
Product-type designation
SCALANCE W788C-2 RJ45
Product-type designation
SCALANCE W788C-2 RJ45
Design, dimensions and weight
Width of enclosure without antenna
200 mm
Height of enclosure without antenna
158 mm
Depth of enclosure without antenna
79 mm
Net weight
1.7 kg
Mounting type wall mounting
Yes
Wireless frequencies
Radio frequency
• for WLAN in 2.4 GHz
frequency band
• for WLAN in 5 GHz
frequency band
2.41 … 2.48 GHz
4.9 … 5.8 GHz
Product function
• Access Point Mode
• Client Mode
Yes
No
Number of SSIDs
16
Product functions management,
configuration
6
Standard
• for EMC from FM
• for hazardous zone
• for safety of CSA and UL
Product properties, functions,
components general
Product function
• operation with IWLAN controller
• operation with Enterasys
WLAN controller
Standards, specifications,
approvals
Yes
Yes
Verification of suitability
• CE mark
• EC declaration of conformity
• C-Tick
• CCC
• Railway application in accordance
with EN 50155
• e1 approval
• E1 approval
• NEMA4X
• Power-over-Ethernet according
IEEE802.3at for type 1 and
IEEE802.3af
• Power-over-Ethernet according to
IEEE802.3at for type 2
Standard for wireless communication
• IEEE 802.11a
• IEEE 802.11b
• IEEE 802.11g
• IEEE 802.11h
• IEEE 802.11n
Wireless approval
FM 3611: Class I, Division 2,
Groups A,B,C,D, T4 / Class 1, Zone 2,
Group IIC, T4
EN 60079-15:2005,
EN 60079-0:2006, II 3 G Ex nA II T4
KEMA 07 ATEX 0145X
UL 60950-1 CSA C22.2 No. 60950-1
Yes
Yes
Yes
No
No
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
You will find the current list
of countries at:
www.siemens.com/wireless-approvals
Accessories
Accessories
6/72
Siemens IK PI · 2015
24 V DC screw terminal and screw
terminal for digital input and output
included in the scope of delivery
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Controller and Controller Access Points IEEE 802.11n
SCALANCE W788 RJ45 controller access points for use in control cabinet
■ Ordering data
Article No.
■ More information
SCALANCE W788C RJ45 Controller access points
Selection tools:
IWLAN access points for operating
with the SCALANCE WLC
IWLAN Controller;
with two built-in wireless interfaces;
wireless networks
IEEE 802.11a/b/g/h/n at 2.4/5 GHz
up to 450 Mbit/s; WPA2/AES;
Power over Ethernet (PoE),
IP30 degree of protection
(-20 °C to +60 °C);
scope of delivery:
Mounting hardware;
manual on CD-ROM,
German/English
• SCALANCE W788C-2 RJ45
with R-SMA female connections
for six external antennas
To assist in selecting Industrial Ethernet components, the TIA
Selection Tool is available at:
http://www.siemens.com/tia-selection-tool
Wireless approvals:
Current approvals can be found on the Internet at:
http://www.siemens.com/wireless-approvals
6GK5788-2FC00-1AA0
Accessories
DIN rail mounting adapter
6GK5798-8ML00-0AB3
DIN rail mounting adapter for
SCALANCE W788 M12 and
SCALANCE W788 RJ45;
screw fixing for mounting on a
35 mm DIN rail to EN 50 022;
scope of supply: 3 units per pack
IE FC RJ45 Plug 4 x 2
RJ45 plug connector for Industrial
Ethernet (10/100/1 000 Mbit/s)
with a sturdy metal enclosure and
integrated insulation displacement
contacts for connecting Industrial
Ethernet FC installation cables;
180° cable outlet;
for network components
and CPs/CPUs with Industrial
Ethernet interface
• 1 pack = 1 unit
• 1 pack = 10 units
• 1 pack = 50 units
6GK1901-1BB11-2AA0
6GK1901-1BB11-2AB0
6GK1901-1BB11-2AE0
IE FC Standard Cable GP 4 x 2
6XV1878-2A
6
8-core, shielded TP installation
cable for connection
to IE FC RJ45 Plug 4 x 2 and
IE M12 Plug PRO 4 x 2;
PROFINET-compatible;
with UL approval;
sold by the meter;
max. length 1 000 m,
minimum order quantity 20 m
IE FC Stripping Tool
6GK1901-1GA00
Preadjusted stripping tool
for fast stripping of the Industrial
Ethernet FC cables
Antennas and miscellaneous
IWLAN accessories
See Industrial Wireless LAN/
accessories
Siemens IK PI · 2015
6/73
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Controller and Controller Access Points IEEE 802.11n
SCALANCE W788C M12 controller access points for indoor use
■ Overview
■ Design
• Rugged aluminum enclosure, shock and vibration-proof,
for high mechanical requirements
• High IP65 degree of protection against dust and water jets
• For use at ambient temperatures from -20 °C to +60 °C
• 6 x N-Connect sockets for the connection of direct mountable
and remote antennas
• Antenna placement optimized for the 3x3 MIMO technology;
the antennas do not interfere with each other when they are
mounted directly on the device
• Suitable for 2.4 GHz and 5 GHz
• 1 x M12 connection for 10/100/1 000 Mbit/s with Power-overEthernet according to IEEE 802.3at
• 1 x M12 socket for power supply (24 V DC)
• Function LEDs for optical signaling of faults and operating
states
• Mounting: Wall, S7-1500 mounting rail, S7-300 mounting rail,
or on 35 mm standard mounting rail
• SCALANCE W788C-2 M12 controller-based access points
can only be operated on the SCALANCE WLC IWLAN
Controller
• Particularly suitable for industrial applications without control
cabinets
3x N-Connect (female) connections for antennas
3x N-Connect
(female)
connections
for antennas
24 V DC
connection
M12 connection
(Gigabit)
n†prXW††ZWZ[X
6
Design and interfaces of the SCALANCE W788C-2 M12 controller-based
access points
Product versions
SCALANCE W788C-2 M12 (controller-based)
• Two wireless cards permanently installed in the device
6/74
Siemens IK PI · 2015
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Controller and Controller Access Points IEEE 802.11n
SCALANCE W788C M12 controller access points for indoor use
■ Technical specifications
Article No.
6GK5788-2GD00-1AA0
Article No.
6GK5788-2GD00-1AA0
Product-type designation
SCALANCE W788C-2 M12
Product-type designation
SCALANCE W788C-2 M12
Transmission rate
Transmission rate
• with W-LAN maximum
• with Industrial Ethernet
• note
Supply voltage,
current consumption, power loss
450 Mbit/s
10 … 1 000 Mbit/s
-
Interfaces
Number of electrical connections
• for network components and
terminal equipment
• for power supply
• for redundant power supply
Design of electrical connection
• for network components and
terminal equipment
• for power supply
1
1
1
M12 interface (8-pole, X-coded) PoE
M12 interface (4-pole, A-coded) PoE
Number of optical interfaces
for optical waveguide at 100 Mbit/s
-
Design of optical interface
for optical waveguide at 100 Mbit/s
-
design of the removable storage
C-PLUG
No
Interfaces wireless
Type of supply voltage
Supply voltage
• 1 from M12 Power Connector (Acoded) for redundant power supply
• 2 from M12 Power Connector (Acoded) for redundant power supply
• from Power-over-Ethernet according
IEEE802.3at for type 1 and
IEEE802.3af
• from Power-over-Ethernet according
IEEE802.3at for type 2
DC
19.2 V
28.8 V
48 V
50 V
Current consumed
• at 24 V with DC typical
0.63 A
• with Power-over-Ethernet according 0.22 A
to IEEE802.3at for type 1 and
IEEE802.3af typical
• with Power-over-Ethernet according 0.3 A
to IEEE802.3at for type 2 typical
Effective power loss
• at 24V for DC typical
15 W
• with Power-over-Ethernet according 10.7 W
to IEEE802.3at for type 1 and
IEEE802.3af typical
• with Power-over-Ethernet according 15 W
to IEEE802.3at for type 2 typical
Number of radio cards permanently
installed
2
Number of internal antennas
-
Permitted ambient conditions
Number of electrical connections
for external antenna(s)
6
Design of the electrical connection
for external antenna(s)
N-Connect (socket)
Ambient temperature
• during operating
• during storage
• during transport
Product property external antenna
can be mounted directly on device
Yes
6
-20 … +60 °C
-40 … +70 °C
-40 … +70 °C
Relative humidity at 25 °C without
condensation during operating
maximum
90 %
Protection class IP
IP65
Ambient condition for (standard)
operation mode
When used under hazardous
conditions (Zone 2), the
SCALANCE W788-xPRO/RR or
W74x-1PRO/RR product must be
installed in an enclosure. To comply
with EN 50021, this enclosure must
meet the requirements of at least IP54
in compliance with EN 60529.
Siemens IK PI · 2015
6/75
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Controller and Controller Access Points IEEE 802.11n
SCALANCE W788C M12 controller access points for indoor use
■ Technical specifications (continued)
Article No.
6GK5788-2GD00-1AA0
Article No.
6GK5788-2GD00-1AA0
Product-type designation
SCALANCE W788C-2 M12
Product-type designation
SCALANCE W788C-2 M12
Design, dimensions and weight
Width of enclosure without antenna
200 mm
Height of enclosure without antenna
176 mm
Depth of enclosure without antenna
79 mm
Net weight
1.7 kg
Mounting type wall mounting
Yes
Wireless frequencies
Radio frequency
• for WLAN in 2.4 GHz
frequency band
• for WLAN in 5 GHz
frequency band
2.41 … 2.48 GHz
4.9 … 5.8 GHz
Product properties, functions,
components general
Product function
• Access Point Mode
• Client Mode
Yes
No
Number of SSIDs
16
Product functions management,
configuration
6
Product function
• operation with IWLAN controller
• operation with Enterasys WLAN
controller
Yes
Yes
Standards, specifications,
approvals
Standard
• for hazardous zone
• for safety of CSA and UL
Verification of suitability
• CE mark
• EC declaration of conformity
• C-Tick
• Railway application
in accordance with EN 50155
• e1 approval
• E1 approval
• NEMA4X
• Power-over-Ethernet
according IEEE802.3at for type 1
and IEEE802.3af
• Power-over-Ethernet
• according to IEEE802.3at for type 2
Standard for wireless communication
• IEEE 802.11a
• IEEE 802.11b
• IEEE 802.11g
• IEEE 802.11h
• IEEE 802.11n
Wireless approval
EN 60079-15:2005, EN 600790:2006, II 3 G Ex nA II T4 KEMA 07
ATEX 0145X
UL 60950-1 CSA C22.2 No. 60950-1
Yes
Yes
Yes
No
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
You will find the current list
of countries at:
www.siemens.com/wireless-approvals
Accessories
Accessories
6/76
Siemens IK PI · 2015
-
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Controller and Controller Access Points IEEE 802.11n
SCALANCE W788C M12 controller access points for indoor use
■ Ordering data
Article No.
■ More information
SCALANCE W788C M12 Controller Access Points
Selection tools:
IWLAN access points
for operating with the
SCALANCE WLC IWLAN Controller;
with two built-in wireless interfaces;
wireless networks
IEEE 802.11a/b/g/h/n at 2.4/5 GHz
up to 450 Mbit/s;
WPA2/AES;
Power over Ethernet (PoE),
IP65 degree of protection
(-20 °C to +60 °C);
scope of delivery:
Mounting hardware; manual
on CD-ROM,
German/English
• SCALANCE W788C-2 M12
with N-Connect female connections for six external antennas
To assist in selecting Industrial Ethernet components, the TIA
Selection Tool is available at:
http://www.siemens.com/tia-selection-tool
Wireless approvals:
Current approvals can be found on the Internet at:
http://www.siemens.com/wireless-approvals
6GK5788-2GD00-1AA0
Accessories
IE FC M12 Plug PRO 4 x 2
M12 plug-in connector suitable
for on-site assembly (X-coded,
IP65/IP67), metal enclosure,
insulation/displacement fast connection method, for SCALANCE W
• 1 unit
• 8 units
6GK1901-0DB30-6AA0
6GK1901-0DB30-6AA8
DIN rail mounting adapter
6GK5798-8ML00-0AB3
DIN rail mounting adapter for
SCALANCE W788 M12 and
SCALANCE W788 RJ45;
screw fixing for mounting on a
35 mm DIN rail to EN 50 022;
scope of supply: 3 units per pack
IE FC Standard Cable GP 4 x 2
6
6XV1878-2A
8-core, shielded TP installation
cable for connection to
IE FC RJ45 Plug 4 x 2 and
IE M12 Plug PRO 4 x 2;
PROFINET-compatible;
with UL approval;
sold by the meter;
max. length 1 000 m,
minimum order quantity 20 m
IE FC Flexible Cable GP 4 x 2
6XV1878-2B
8-core, shielded TP installation
cable for connection to
IE FC RJ45 Plug 4 x 2 and
IE M12 Plug PRO 4 x 2
for occasional movement;
PROFINET-compliant;
with UL approval;
sold by the meter;
max. length 1 000 m,
minimum order 20 m
IE FC Stripping Tool
6GK1901-1GA00
Preadjusted stripping tool for fast
stripping of the Industrial Ethernet
FC cables
Power M12 Cable Connector PRO
6GK1907-0DC10-6AA3
Terminal socket for connection of
SCALANCE W700 for 24 V DC
supply voltage;
4-pole, A-coded,
with assembly instructions, 3 units
Power Cable 2 x 0.75
6XV1812-8A
Connecting cable for Power M12
Cable Connector PRO,
sold by the meter
Antennas and miscellaneous
IWLAN accessories
See Industrial Wireless LAN/
accessories
Siemens IK PI · 2015
6/77
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Controller and Controller Access Points IEEE 802.11n
SCALANCE W788C M12 EEC for enhanced environmental conditions
■ Overview
■ Design
• SCALANCE W788C-2 M12 controller-based access points
can only be operated on the SCALANCE WLC711 IWLAN
Controller
• Suitable for use in the industry and automation area, but
especially in the rail transport environment
• Rugged aluminum enclosure, shock and vibration-proof,
for high mechanical requirements
• Special coating of the printed circuit boards (conformal
coating)
• Resistant to condensation
• Railroad approval in accordance with EN 50155
• High IP65 degree of protection against dust and water jets
• For use at ambient temperatures from -40 °C to +70 °C
• 6 x N-Connect sockets for the connection of direct mountable
and remote antennas
• Antenna placement optimized for the 3x3 MIMO technology;
the antennas do not interfere with each other when they are
mounted directly on the device
• 1 x M12 connection for 10/100/1 000 Mbit/s with Power-overEthernet according to IEEE 802.3at
• 1 x M12 socket for power supply (24 V DC)
• Function LEDs for optical signaling of faults/errors and
operating statuses
• Mounting: Wall, S7-1500 mounting rail, S7-300 mounting rail,
or on 35 mm standard mounting rail
3x N-Connect (female) connections for antennas
3x N-Connect
(female)
connections
for antennas
24 V DC
connection
M12 connection
(Gigabit)
n†prXW††ZWZ[X
6
Design and interfaces of the SCALANCE W788C-2 M12 EEC controllerbased access points
Product version
SCALANCE W788C-2 M12 EEC (controller-based)
• Two wireless cards permanently installed in the device;
six connections for external antennas
6/78
Siemens IK PI · 2015
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Controller and Controller Access Points IEEE 802.11n
SCALANCE W788C M12 EEC for enhanced environmental conditions
■ Integration
ANT 795-6MN
SCALANCE
W788C-2 M12 EEC
ANT793-8DJ
ANT793-8DJ
ANT793-8DJ
ANT 795-6MN
Industrial Ethernet
(Trainside)
SCALANCE
W788C-2
M12 EEC
Tunnel
SCALANCE
XR324-12M TS
with M12 module
SCALANCE
W788C-2 M12
EEC
SCALANCE
W788C-2
M12 EEC
SCALANCE W788C-2 M12 EEC
Industrial Ethernet
(Trainside)
Tunnel
Communication
Server
Trainguard
Train Control
SCALANCE
X308-2M TS
Tunnel
Industrial Ethernet (Trackside)
SCALANCE
XR552-12M
Infotainment
Server
Workstations
Content
Workstation
WLAN
Controller
G_IK10_XX_30330
ANT793-8DJ
Data transfer on trains using SCALANCE Controller-based access points
Siemens IK PI · 2015
6/79
6
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Controller and Controller Access Points IEEE 802.11n
SCALANCE W788C M12 EEC for enhanced environmental conditions
■ Technical specifications
Article No.
6GK5788-2GD00-1TA0
Article No.
6GK5788-2GD00-1TA0
Product-type designation
SCALANCE W788C-2 M12 EEC
Product-type designation
SCALANCE W788C-2 M12 EEC
Transmission rate
Transmission rate
• with W-LAN maximum
• with Industrial Ethernet
• note
Supply voltage, current consumption, power loss
450 Mbit/s
10 … 1 000 Mbit/s
-
Interfaces
Number of electrical connections
• for network components
and terminal equipment
• for power supply
• for redundant power supply
Design of the electrical connection
• for network components and
terminal equipment
• for power supply
1
1
1
M12 interface (8-pole, X-coded) PoE
M12 interface (4-pole, A-coded)
Number of optical interfaces
for optical waveguide at 100 Mbit/s
-
Design of optical interface
for optical waveguide at 100 Mbit/s
-
Design of the removable storage
C-PLUG
No
Interfaces wireless
6
Number of radio cards permanently
installed
2
Number of internal antennas
-
Number of electrical connections
for external antenna(s)
6
Design of the electrical connection
for external antenna(s)
N-Connect (socket)
Product property external antenna
can be mounted directly on device
Yes
6/80
Siemens IK PI · 2015
Type of supply voltage
Supply voltage
• 1 from M12 Power Connector
(A-coded) for redundant power
supply
• 2 from M12 Power Connector
(A-coded) for redundant power
supply
• from Power-over-Ethernet
according IEEE802.3at for type 1
and IEEE802.3af
• from Power-over-Ethernet
according IEEE802.3at for type 2
DC
19.2 V
28.8 V
48 V
50 V
Current consumed
• at 24 V with DC typical
0.63 A
0.22 A
• with Power-over-Ethernet
according to IEEE802.3at for type 1
and IEEE802.3af typical
• with Power-over-Ethernet
0.3 A
according to IEEE802.3at
for type 2 typical
Effective power loss
• at 24V for DC typical
15 W
10.7 W
• with Power-over-Ethernet
according to IEEE802.3at for type 1
and IEEE802.3af typical
• with Power-over-Ethernet
15 W
according to IEEE802.3at
for type 2 typical
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Controller and Controller Access Points IEEE 802.11n
SCALANCE W788C M12 EEC for enhanced environmental conditions
■ Technical specifications (continued)
Article No.
6GK5788-2GD00-1TA0
Article No.
6GK5788-2GD00-1TA0
Product-type designation
SCALANCE W788C-2 M12 EEC
Product-type designation
SCALANCE W788C-2 M12 EEC
Permitted ambient conditions
Ambient temperature
• during operating
• during storage
• during transport
-20 … +60 °C
-40 … +70 °C
-40 … +70 °C
Relative humidity at 25 °C without
condensation during operating
maximum
90 %
Protection class IP
IP65
Ambient condition for (standard)
operation mode
When used under hazardous conditions (Zone 2), the SCALANCE W788xPRO/RR or W74x-1PRO/RR product
must be installed in an enclosure. To
comply with EN 50021, this enclosure
must meet the requirements of at
least IP 54 in compliance with EN
60529.
Design, dimensions and weight
Width of enclosure without antenna
Height of enclosure without antenna
Depth of enclosure without antenna
200 mm
176 mm
79 mm
Net weight
1.7 kg
Mounting type wall mounting
Yes
Wireless frequencies
Radio frequency
• for WLAN in 2.4 GHz
frequency band
• for WLAN in 5 GHz
frequency band
2.41 … 2.48 GHz
Product functions management,
configuration
• operation with IWLAN controller
• operation with Enterasys WLAN
controller
Standards, specifications,
approvals
Standard
• for EMC from FM
• for hazardous zone
• for safety of CSA and UL
Verification of suitability
• CE mark
• EC declaration of conformity
• C-Tick
• CCC
• Railway application in accordance
with EN 50155
• e1 approval
• E1 approval
• NEMA4X
• Power-over-Ethernet according
IEEE802.3at for type 1 and
IEEE802.3af
• Power-over-Ethernet according to
IEEE802.3at for type 2
Product function
• Access Point Mode
• Client Mode
Yes
No
Standard for wireless communication
• IEEE 802.11a
• IEEE 802.11b
• IEEE 802.11e
• IEEE 802.11g
• IEEE 802.11h
• IEEE 802.11i
• IEEE 802.11n
Number of SSIDs
16
Wireless approval
4.9 … 5.8 GHz
Product properties, functions,
components general
Yes
Yes
FM 3611: Class I, Division 2,
Groups A,B,C,D, T4 / Class 1, Zone 2,
Group IIC, T4
UL 60950-1 CSA C22.2 No. 60950-1
Yes
Yes
Yes
Yes
No
No
No
Yes
Yes
6
Yes
Yes
Yes
Yes
Yes
Yes
Yes
You will find the current list
of countries at:
www.siemens.com/wireless-approvals
Accessories
Accessories
-
Siemens IK PI · 2015
6/81
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Controller and Controller Access Points IEEE 802.11n
SCALANCE W788C M12 EEC for enhanced environmental conditions
■ Ordering data
Article No.
SCALANCE W788C M12 EEC Controller Access Points
Selection tools:
IWLAN access points
for operation with the
SCALANCE WLC IWLAN controller;
with built-in wireless interfaces;
wireless networks
IEEE 802.11a/b/g/h/n at 2.4/5 GHz
up to 450 Mbit/s;
railroad approval in accordance
with EN 50155;
conformal coating;
WPA2/AES;
Power over Ethernet (PoE),
IP65 degree of protection;
scope of supply:
Mounting hardware; manual
on CD-ROM, German/English
• SCALANCE W788C-2 M12 EEC
with N-Connect female connections for six external antennas
To assist in selecting Industrial Ethernet components, the TIA
Selection Tool is available at:
http://www.siemens.com/tia-selection-tool
Wireless approvals:
Current approvals can be found on the Internet at:
http://www.siemens.com/wireless-approvals
6GK5788-2GD00-1TA0
Accessories
IE FC M12 Plug PRO 4 x 2
6
■ More information
M12 plug-in connector suitable
for on-site assembly (X-coded,
IP65/IP67), metal enclosure,
insulation displacement fast connection method, for SCALANCE W
• 1 unit
• 2 units
6GK1901-0DB30-6AA0
6GK1901-0DB30-6AA8
DIN rail mounting adapter
6GK5798-8ML00-0AB3
DIN rail mounting adapter for
SCALANCE W788 M12 and
SCALANCE W788 RJ45;
screw fixing for mounting on a
35 mm DIN rail to EN 50 022;
scope of supply: 3 units per pack
IE FC standard cable GP 4 x 2
6XV1878-2A
8-core, shielded TP installation
cable for connection to
IE FC RJ45 Plug 4 x 2 and
IE M12 Plug PRO 4 x 2;
PROFINET-compliant;
with UL approval;
sold by the meter;
max. length 1 000 m,
minimum order quantity 20 m
IE FC flexible cable GP 4 x 2
6XV1878-2B
8-core, shielded TP installation
cable for connection to
IE FC RJ45 Plug 4 x 2 and
IE M12 Plug PRO 4 x 2 for occasional movement;
PROFINET-compliant;
with UL approval;
sold by the meter;
max. length 1 000 m,
minimum order 20 m
IE FC Stripping Tool
6GK1901-1GA00
Preadjusted stripping tool for fast
stripping of the Industrial Ethernet
FC cables
Power M12 cable connector PRO
6GK1907-0DC10-6AA3
Terminal socket for connection of
SCALANCE W700 for 24 V DC
supply voltage;
4-pole, A-coded,
with assembly instructions, 3 units
Power Cable 2 x 0.75
6XV1812-8A
Connecting cable for Power M12
cable connector PRO,
sold by the meter
Antennas and miscellaneous
IWLAN accessories
6/82
Siemens IK PI · 2015
See Industrial Wireless LAN/
accessories
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Controller and Controller Access Points IEEE 802.11n
SCALANCE W786 RJ45 controller access points for outdoor use
• SCALANCE W786C-2 controller-based access points can
only be operated on the SCALANCE WLC IWLAN Controller
• Particularly well-suited to applications with demanding
climatic requirements when installed outdoors and in areas
accessible to the public
■ Design
• Rugged, impact-resistant plastic enclosure, shock and
vibration-proof for demanding mechanical requirements
• High IP65 degree of protection against dust and water jets
• For use at ambient temperatures from -40 °C to +60 °C
• Resistant to condensation
• Resistant to UV radiation and saltwater spray
• Design for use outdoors
• 6 x R-SMA sockets for the connection of remote antennas
• Suitable for 2.4 GHz and 5 GHz
• 1 x RJ45 connector for 10/100/1 000 Mbit/s and Power-overEthernet according to IEEE 802.3at
• 1 x 24 V DC connector, optional operation with 12 to 24 V DC
or 100 to 240 V AC with power supply that can be integrated
in the device
• Function LEDs for optical signaling of faults and operating
states
• Mounting: Wall or, with optional mounting set, on S7 mounting
rail, 35 mm standard mounting rail, or on a pole
Infeed of 24 V DC or
with power supplies
100-240 V AC or
12-24 V DC (redundant)
RJ45 connection
(Gigabit)
6 x antenna
connections
R-SMA
(female)
depending
on variant
6
n†prXW††ZWZ[Y
■ Overview
Internal antennas
depending on variant
Design and interfaces of the SCALANCE W786C-2 controller-based
access points
Product versions
SCALANCE W786C-2 RJ45 (controller-based)
• Two wireless cards permanently installed in the device;
six connections for external antennas
SCALANCE W786C-2IA RJ45 (controller-based)
• Two wireless cards permanently installed in the device;
six internal antennas
Siemens IK PI · 2015
6/83
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Controller and Controller Access Points IEEE 802.11n
SCALANCE W786 RJ45 controller access points for outdoor use
■ Technical specifications
Article No.
6GK5786-2HC00-1AA0
6GK5 786-2FC00-1AA0
Product-type designation
SCALANCE W786C-2IA RJ45
SCALANCE W786C-2 RJ45
450 Mbit/s
10 … 1 000 Mbit/s
-
450 Mbit/s
10 … 1 000 Mbit/s
-
1
1
1
1
1
1
RJ45 socket
RJ45 socket
Transmission rate
Transmission rate
• with W-LAN maximum
• with Industrial Ethernet
• note
Interfaces
Number of electrical connections
• for network components
and terminal equipment
• for power supply
• for redundant power supply
Design of electrical connection
• for network components
and terminal equipment
• for power supply
6
2-pole connector (24 V DC) or optionally available power
2-pole connector (24 V DC) or optionally available power
supply adapter (4-pole 24 V DC or 3-pole 110 to 230 V AC) supply adapter (4-pole 24 V DC or 3-pole 110 to 230 V AC)
Number of optical interfaces
for optical waveguide at 100 Mbit/s
-
-
Design of optical interface
for optical waveguide at 100 Mbit/s
-
-
Number of optical interfaces
for optical waveguide at 1 000 Mbit/s
-
Design of optical interface
for optical waveguide at 1 000 Mbit/s
-
No
No
Number of radio cards permanently
installed
2
2
Number of internal antennas
6
-
Number of electrical connections
for external antenna(s)
-
6
Design of the electrical connection
for external antenna(s)
-
R-SMA (socket)
Product property external antenna
can be mounted directly on device
-
No
DC
DC
19.2 V
28.8 V
48 V
19.2 V
28.8 V
48 V
50 V
50 V
100 … 240 V
12 … 24 V
100 … 240 V
12 … 24 V
0.63 A
0.07 A
0.22 A
0.63 A
0.07 A
0.22 A
-
-
Design of the removable storage
C-PLUG
Interfaces wireless
Supply voltage,
current consumption, power loss
Type of supply voltage
Supply voltage
• 1 from terminal block
• 2 from terminal block
• from Power-over-Ethernet
according IEEE802.3at for type 1
and IEEE802.3af
• from Power-over-Ethernet
according IEEE802.3at for type 2
• from optional integratable power
supply
- with AC
- with DC
Current consumed
• at 24 V with DC typical
• at 230 V with AC typical
• with Power-over-Ethernet
according to IEEE802.3at for type 1
and IEEE802.3af typical
• with Power-over-Ethernet
according to IEEE802.3at for type 2
typical
6/84
Siemens IK PI · 2015
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Controller and Controller Access Points IEEE 802.11n
SCALANCE W786 RJ45 controller access points for outdoor use
■ Technical specifications (continued)
Article No.
6GK5786-2HC00-1AA0
6GK5 786-2FC00-1AA0
Product-type designation
SCALANCE W786C-2IA RJ45
SCALANCE W786C-2 RJ45
15 W
15 W
15 W
15 W
15 W
10.7 W
-
-
-40 … +60 °C
-40 … +85 °C
-40 … +85 °C
-40 … +60 °C
-40 … +85 °C
-40 … +85 °C
Relative humidity at 25 °C without
condensation during operating
maximum
100 %
100 %
Protection class IP
IP65
IP65
Ambient condition for (standard)
operation mode
When using the power supply 100 to 240 V AC,
an operating temperature of -40 °C to +60 °C
is permissible
When using the power supply 100 to 240 V AC,
an operating temperature of -40 °C to +60 °C
is permissible
Width of enclosure without antenna
251 mm
251 mm
Height of enclosure without antenna
251 mm
251 mm
Depth of enclosure without antenna
72 mm
72 mm
Net weight
2.24 kg
2.24 kg
Mounting type wall mounting
Yes
Yes
Mounting type
For mast mounting, 35 mm DIN rail mounting and S7-300
rail mounting, an additional support plate is required
For mast mounting, 35 mm DIN rail mounting and S7-300
rail mounting, an additional support plate is required
2.41 … 2.48 GHz
2.41 … 2.48 GHz
4.9 … 5.8 GHz
4.9 … 5.8 GHz
Product function
• Access Point Mode
• Client Mode
Yes
No
Yes
No
Number of SSIDs
16
16
Yes
Yes
Yes
Yes
Effective power loss
• at 24V for DC typical
• at 230 V with AC typical
• with Power-over-Ethernet
according to IEEE802.3at for type 1
and IEEE802.3af typical
• with Power-over-Ethernet
according to IEEE802.3at for type 2
typical
Permitted ambient conditions
Ambient temperature
• during operating
• during storage
• during transport
Design, dimensions and weight
6
Wireless frequencies
Radio frequency
• for WLAN in 2.4 GHz
frequency band
• for WLAN in 5 GHz
frequency band
Product properties, functions,
components general
Product functions management,
configuration
Product function
• operation with IWLAN controller
• operation with Enterasys WLAN
controller
Siemens IK PI · 2015
6/85
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Controller and Controller Access Points IEEE 802.11n
SCALANCE W786 RJ45 controller access points for outdoor use
■ Technical specifications (continued)
Article No.
6GK5786-2HC00-1AA0
6GK5 786-2FC00-1AA0
Product-type designation
SCALANCE W786C-2IA RJ45
SCALANCE W786C-2 RJ45
EN 60079-15:2005, EN 60079-0:2006, II 3 G Ex nA II T4
KEMA 07 ATEX 0145X
UL 60950-1 CSA C22.2 No. 60950-1
EN 60079-15:2005, EN 60079-0:2006, II 3 G Ex nA II T4
KEMA 07 ATEX 0145X
UL 60950-1 CSA C22.2 No. 60950-1
Yes
Yes
Yes
No
No
Yes
Yes
Yes
No
No
No
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
You will find the current list of countries at:
www.siemens.com/wireless-approvals
You will find the current list of countries at:
www.siemens.com/wireless-approvals
24 V DC screw terminal included in scope of delivery
24 V DC screw terminal included in scope of delivery
Standards, specifications,
approvals
Standard
• for hazardous zone
• for safety of CSA and UL
Verification of suitability
• CE mark
• EC declaration of conformity
• C-Tick
• CCC
• Railway application
in accordance with EN 50155
• e1 approval
• E1 approval
• NEMA4X
• Power-over-Ethernet according
IEEE802.3at for type 1 and
IEEE802.3af
• Power-over-Ethernet according to
IEEE802.3at for type 2
6
Standard for wireless communication
• IEEE 802.11a
• IEEE 802.11b
• IEEE 802.11g
• IEEE 802.11h
• IEEE 802.11n
Wireless approval
Accessories
Accessories
6/86
Siemens IK PI · 2015
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Controller and Controller Access Points IEEE 802.11n
SCALANCE W786 RJ45 controller access points for outdoor use
■ Ordering data
Article No.
■ More information
SCALANCE W786C Controller access points
Selection tools:
IWLAN access points
for operating with the
SCALANCE WLC IWLAN Controller;
with two built-in wireless interfaces;
wireless networks
IEEE 802.11a/b/g/h/n at 2.4/5 GHz
up to 450 Mbit/s;
WPA2/AES;
Power over Ethernet (PoE),
IP65 degree of protection
(-40 °C to +60 °C);
scope of delivery:
Mounting hardware,
2-pin screw terminal for 24 V DC;
manual on CD-ROM;
German/English
• SCALANCE W786C-2IA RJ45
with six internal antennas
• SCALANCE W786C-2 RJ45
with R-SMA female connections
for six external antennas
To assist in selecting Industrial Ethernet components, the TIA
Selection Tool is available at:
http://www.siemens.com/tia-selection-tool
Wireless approvals:
Current approvals can be found on the Internet at:
http://www.siemens.com/wireless-approvals
6GK5786-2HC00-1AA0
6GK5786-2FC00-1AA0
Accessories
Power supply PS791-2DC
6GK5791-2DC00-0AA0
12 to 24 V DC power supply for
installation in SCALANCE W786C-2
products;
operating instructions
in German/English
Power supply PS791-2AC
6GK5791-2AC00-0AA0
6
110 to 230 V DC power supply for
installation in SCALANCE W786C-2
products;
operating instructions
in German/English
MS1 mounting set
6GK5798-8MG00-0AA0
Mounting set for fixing the
SCALANCE W786C-2 products
onto an S7-300 mounting rail or a
35 mm standard mounting rail
IE FC RJ-45 Plug 4 x 2
RJ45 plug connector for Industrial
Ethernet (10/100/1 000 Mbit/s) with
a rugged metal enclosure and
integrated insulation displacement
contacts for connecting Industrial
Ethernet FC installation cables;
180° cable outlet;
for network components
and CPs/CPUs with Industrial
Ethernet interface
• 1 pack = 1 unit
• 1 pack = 10 units
• 1 pack = 50 units
6GK1901-1BB11-2AA0
6GK1901-1BB11-2AB0
6GK1901-1BB11-2AE0
IE FC Standard Cable GP 4 x 2
6XV1878-2A
8-core, shielded TP installation
cable for connection to
IE FC RJ45 Plug 4 x 2 and
IE M12 Plug PRO 4 x 2;
PROFINET-compatible;
with UL approval;
sold by the meter;
max. length 1 000 m,
minimum order quantity 20 m
IE FC Stripping Tool
6GK1901-1GA00
Preadjusted stripping tool
for fast stripping of the Industrial
Ethernet FC cables
Antennas and miscellaneous
IWLAN accessories
See Industrial Wireless LAN/
accessories
Siemens IK PI · 2015
6/87
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Controller and Controller Access Points IEEE 802.11n
SCALANCE W786C SFP controller access points for outdoor use
■ Overview
■ Design
• Rugged, impact-resistant plastic enclosure, shock and
vibration-proof for demanding mechanical requirements
• Two slots for SFP plug-in transceivers (optical 2-port switch)
• High IP65 degree of protection against dust and water jets
• For use at ambient temperatures from -40 °C to +60 °C
(depending on the SFP plug-in transceiver used)
• Resistant to condensation
• Resistant to UV radiation and saltwater spray
• Design for use outdoors
• 6 x R-SMA sockets for the connection of remote antennas
• 1 x 24 V DC connector, optional operation with 12 to 24 V DC
or 100 to 240 V AC with power supply that can be integrated
in the device
• Function LEDs for optical signaling of faults/errors and
operating statuses
• Mounting: Wall or, with optional mounting set, on S7 mounting
rail, 35 mm standard mounting rail, or on a pole
• SCALANCE W786C-2 SFP controller-based access points
can only be operated on the SCALANCE WLC711 IWLAN
Controller
• Particularly well-suited to applications with demanding
climatic requirements when installed outdoors and in areas
accessible to the public
Infeed of 24 V DC or
with power supplies
100-240 V AC or
12-24 V DC (redundant)
2 SFP slots with
integrated 2-port
switch
6 x connections
for antennas R-SMA
(female)
n†prXW††ZWZ[Z
6
Design and interfaces of the SCALANCE W786C-2 controller-based
access points
Product versions
SCALANCE W786C-2 SFP (controller-based)
• Two wireless cards permanently installed in the device;
six connections for external antennas
6/88
Siemens IK PI · 2015
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Controller and Controller Access Points IEEE 802.11n
SCALANCE W786C SFP controller access points for outdoor use
■ Technical specifications
Article No.
6GK5786-2FE00-1AA0
Article No.
6GK5786-2FE00-1AA0
Product-type designation
SCALANCE W786C-2 SFP
Product-type designation
SCALANCE W786C-2 SFP
Transmission rate
Transfer rate
• with W-LAN maximum
• with Industrial Ethernet
• note
Supply voltage,
current consumption, power loss
450 Mbit/s
1 000 Mbit/s
-
Interfaces
Number of electrical connections
• for network components
and terminal equipment
• for power supply
• for redundant power supply
Design of the electrical connection
• for network components
and terminal equipment
• for power supply
1
0
2-pole connector (24 V DC)
or optionally available power supply
adapter (4-pole 24 V DC or 3-pole
110 to 230 V AC)
Number of optical interfaces for
optical waveguide at 100 Mbit/s
2
Design of optical interface for
optical waveguide at 100 Mbit/s
SFP slot
Number of optical interfaces for
optical waveguide at 1000 Mbit/s
2
Design of optical interface for
optical waveguide at 1000 Mbit/s
SFP slot
Design of the removable storage
C-PLUG
No
Interfaces wireless
Number of radio cards permanently
installed
2
Number of internal antennas
-
Number of electrical connections for
external antenna(s)
6
Type of supply voltage
Supply voltage
• 1 from terminal block
• 2 from terminal block
• from Power-over-Ethernet
according IEEE802.3at for type 1
and IEEE802.3af
• from Power-over-Ethernet
according IEEE802.3at for type 2
• from optional integratable power
supply
- with AC
- with DC
Current consumed
• at 24 V with DC typical
• at 230 V with AC typical
• with Power-over-Ethernet
according to IEEE802.3at for type 1
and IEEE802.3af typical
• with Power-over-Ethernet
according to IEEE802.3at for type 2
typical
Effective power loss
• at 24V for DC typical
• at 230 V with AC typical
• with Power-over-Ethernet
according to IEEE802.3at for type 1
and IEEE802.3af typical
• with Power-over-Ethernet
according to IEEE802.3at for type 2
typical
DC
19.2 V
28.8 V
-
-
100 … 240 V
12 … 24 V
-
-
-
6
-
Design of the electrical connection for R-SMA (socket)
external antenna(s)
Product property external antenna
can be mounted directly on device
No
Siemens IK PI · 2015
6/89
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Controller and Controller Access Points IEEE 802.11n
SCALANCE W786C SFP controller access points for outdoor use
■ Technical specifications (continued)
Article No.
6GK5786-2FE00-1AA0
Article No.
6GK5786-2FE00-1AA0
Product-type designation
SCALANCE W786C-2 SFP
Product-type designation
SCALANCE W786C-2 SFP
Permitted ambient conditions
Ambient temperature
• during operating
• during storage
• during transport
Standards, specifications,
approvals
-40 … +60 °C
-40 … +85 °C
-40 … +85 °C
Standard
• for EMC from FM
Relative humidity at 25 °C without
condensation during operating
maximum
100 %
• for hazardous zone
Protection class IP
IP65
• for safety of CSA and UL
Ambient condition for (standard)
operation mode
When using the power supply
100 to 240 V AC, an operating
temperature of -40 °C to +60 °C
is permissible
Verification of suitability
• CE mark
• EC declaration of conformity
• C-Tick
• CCC
• Railway application in accordance
with EN 50155
• e1 approval
• E1 approval
• NEMA4X
• Power-over-Ethernet according
IEEE802.3at for type 1 and
IEEE802.3af
• Power-over-Ethernet according to
IEEE802.3at for type 2
Design, dimensions and weight
Width of enclosure without antenna
Height of enclosure without antenna
Depth of enclosure without antenna
251 mm
251 mm
72 mm
Net weight
2.24 kg
Mounting type wall mounting
Yes
Mounting type
For mast mounting, 35 mm DIN rail
mounting and S7-300 rail mounting,
an additional support plate is
required
Wireless frequencies
6
Radio frequency
• for WLAN in 2.4 GHz
frequency band
• for WLAN in 5 GHz
frequency band
2.41 … 2.48 GHz
4.9 … 5.8 GHz
Wireless approval
Product properties, functions,
components general
Product function
• Access Point Mode
• Client Mode
Yes
No
Number of SSIDs
16
Product functions management,
configuration
Product function
• operation with IWLAN controller
• operation with Enterasys WLAN
controller
6/90
Siemens IK PI · 2015
Standard for wireless communication
• IEEE 802.11a
• IEEE 802.11b
• IEEE 802.11g
• IEEE 802.11h
• IEEE 802.11n
Yes
Yes
FM 3611: Class I, Division 2,
Groups A,B,C,D, T4 / Class 1, Zone 2,
Group IIC, T4
EN 60079-15:2005, EN 600790:2006, II 3 G Ex nA II T4 KEMA 07
ATEX 0145X
UL 60950-1 CSA C22.2 No. 60950-1
Yes
Yes
Yes
No
No
No
Yes
No
No
Yes
Yes
Yes
Yes
Yes
You will find the current list
of countries at:
www.siemens.com/wireless-approvals
Accessories
Accessories
24 V DC screw terminal included in
scope of delivery
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Controller and Controller Access Points IEEE 802.11n
SCALANCE W786C SFP controller access points for outdoor use
■ Ordering data
Article No.
■ More information
SCALANCE W786C-2 SFP controller access points
Selection tools:
IWLAN access points
for operating with the
SCALANCE WLC IWLAN Controller;
with two built-in wireless interfaces
and one integral 2-port switch
(SFP slots);
wireless networks
IEEE 802.11a/b/g/h/n at 2.4/5 GHz
up to 450 Mbit/s; WPA2/AES;
IP65 degree of protection
(-40 °C to +60 °C);
scope of delivery:
Mounting hardware,
2-pin screw terminal for 24 V DC;
manual on CD-ROM;
German/English
• SCALANCE W786C-2 SFP
with six internal antennas
To assist in selecting Industrial Ethernet components, the TIA
Selection Tool is available at:
http://www.siemens.com/tia-selection-tool
Wireless approvals:
Current approvals can be found on the Internet at:
http://www.siemens.com/wireless-approvals
6GK5786-2FE00-1AA0
Accessories
Power supply PS791-2DC
6GK5791-2DC00-0AA0
12 to 24 V DC power supply for
installation in SCALANCE W786C-2
products;
operating instructions
in German/English
Power supply PS791-2AC
6GK5791-2AC00-0AA0
110 to 230 V DC power supply for
installation in SCALANCE W786C-2
products;
operating instructions
in German/English
MS1 mounting set
6
6GK5798-8MG00-0AA0
Mounting set for fixing the
SCALANCE W786C-2 products
onto an S7-300 mounting rail or a
35 mm standard mounting rail
Antennas and miscellaneous
IWLAN accessories
See Industrial Wireless LAN/
accessories
SFP plug-in transceiver
SFP992-1
6GK5992-1AL00-8AA0
Gigabit, multimode, 750 m
SFP992-1LD
6GK5992-1AM00-8AA0
Gigabit, singlemode, 10 km
SFP992-1LH
6GK5992-1AN00-8AA0
Gigabit, singlemode, 40 km
SFP992-1LH+
6GK5992-1AP00-8AA0
Gigabit, singlemode, 70 km
Fiber-optic cables
See glass fiber-optic cables
Siemens IK PI · 2015
6/91
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Client Modules IEEE 802.11n
Overview
■ Overview
6
■ Benefits
The client modules from the SCALANCE W700 product lines are
optimal for integrating Industrial Ethernet stations into Industrial
Wireless LANs (IWLANs) for 2.4 GHz and 5 GHz.
• High data rates (up to 450 Mbit/s in connection with Channel
Bonding) as per IEEE802.11n
• Reliable wireless link by using of MIMO technology (Multiple
Input, Multiple Output). For this, SCALANCE W Client Modules
use up to three streams for simultaneous sending and
receiving.
• SCALANCE W700 Client Modules are suitable for any application: for installation indoors without a control cabinet and for
installation in a control cabinet
• Reliable thanks to a rugged enclosure, protected from water
and dust (up to IP65), resistant to shock, vibration and electromagnetic fields
• Demanding applications with real-time and redundancy
requirements, such as PROFINET with PROFIsafe
• Conformant to standards through supporting IEEE802.11;
expanded software functions especially for use where
increased reliability is required, e.g. cyclic real-time data
traffic and very high-speed roaming (iPCF, iPCF-MC)
• Configuration support by means of wizards and online help;
easy management via Web server and SNMP
• Configuration and diagnostics using Web based
Management, Command Line Interface, and SNMP. Devices
and networks can be configured using STEP 7 (TIA Portal).
For cyclic monitoring, diagnostics and documentation
(reporting) in network mode, the SINEMA Server software is
recommended.
• Enabling of further functions using the KEY-PLUG swap
medium (iPCF, iPCF-MC)
• Fast replacement of devices if a fault occurs thanks to use of
optional KEY-PLUG/C-PLUG (Configuration Plug) swap
medium
6/92
Siemens IK PI · 2015
• Predictable data traffic (deterministic response) and defined
response times on the wireless link
• Reliable wireless link, e.g. by using MIMO technology and
monitoring the wireless link
• Cost savings due to one single wireless network both for
process-critical data and for non-critical communication
• Future-proof because all products are compatible with the
internationally recognized WLAN standard IEEE 802.11,
suitable for license-free 2.4 GHz and 5 GHz frequency bands
(ISM bands)
• Implementation of data-intensive applications such as video
streaming
• Reduced operating costs, because there is no wear and tear
on rotating and moving plant sections
• Cost-effective connection to devices which are remote,
difficult to access or installed in hostile environments
• Investment protection because flexible feature expansions
(iFeatures) are possible by using the KEY-PLUG
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Client Modules IEEE 802.11n
Overview
■ Application
The client modules of the SCALANCE W700 product line are
designed for indoor and outdoor industrial applications as well
as for low-cost integration in control cabinets or mobile machines. They provide a reliable wireless link with fast handover
from one access point to the next (roaming). This allows processes to be monitored and loss of production due to machine
downtimes to be avoided. Industrial Wireless LAN (IWLAN) can
also be used in time-critical applications in factory automation
(PROFINET IO) or for safety-related signals (PROFIsafe).
SCALANCE W products are silicone-free and can therefore
also be used in paint shops. The client modules with high IP65
degree of protection and extended temperature range from
-20 to +60 °C are especially suitable for industrial applications.
The client modules are especially suitable for use in automated
guided vehicle systems or suspended monorails.
When using the RCoax cable (radiating cable), operation is
particularly reliable in conveyor systems and all track applications (e.g. storage and retrieval systems, suspended monorail).
Application examples:
• Automated guided vehicle systems and suspended
monorails;
prevents wear and offers high flexibility for traffic routing
thanks to the wireless transfer of data to the vehicles. It is also
possible to transfer PROFIsafe via IWLAN.
• Cranes;
high flexibility due to access to data communication with the
moving unit independent of the location
• Tunnel application;
reliable wireless link since the devices can handle multiple
path propagation better by using the MIMO technology
• Communication with moving stations (e.g. mobile controls and
devices), container logistics, storage and retrieval machines,
conveyor systems, conveyor belts, rotating machines, trucks
• Wireless coupling of communication segments and bridging
of large distances for fast commissioning and cost-effective
networks in applications where cable routing would be
extremely expensive (e.g. on public roads, rivers, lakes, train
lines)
■ Function
SCALANCE W700 client modules make it possible for a node
with an Industrial Ethernet interface (e.g. a controller) to move
seamlessly and with no wear and tear in an Industrial Wireless
LAN RF field. The node logs on in the RF field via the client module and can exchange information with the entire data network.
If the client module moves, for example, on an automated
guided vehicle system, it is automatically and transparently
handed over from one access point to the next (roaming).
This is possible over distances of up to 30 m indoors (approx.
100 m outdoors). Additional directional antennas can be used
outdoors to achieve ranges of several thousand meters.
Apart from a reliable wireless link, a major feature of the
SCALANCE W700 client modules is their support of IT mechanisms:
• IEEE 802.11a/b/g/n for different frequency ranges
• IEEE802.11e for wireless multimedia (WMM)
• IEEE802.11i for security
• Sending the log entries of the SCALANCE W devices to a
Syslog server
• Modern security mechanisms (e.g. network security such as
IEEE 802.1x, RADIUS, EAP mechanisms)
Security
A high degree of data security is achieved by means of the
WPA2/IEEE 802.11i mechanisms. These define modern procedures that control a regular exchange of the complete 128-bit
key as well as performing the access check (authentication) of
a node. The Advanced Encryption Standard (AES) is available
for data encryption.
On top of this, access to the devices (HTTPS) is encrypted and
a secure logon (SSH) is possible. If a security concept in combination with SCALANCE S is required, the security requirements
can be increased using Virtual Private Networks (VPN).
Functional scope
Depending on the product version, the SCALANCE W700 client
modules can manage the wireless connection for up to eight
connected devices with Ethernet interface. It is possible for
mobile units with a small Ethernet network (up to eight devices)
to be linked into an IWLAN RF field.
Siemens IK PI · 2015
6/93
6
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Client Modules IEEE 802.11n
Overview
■ Function (continued)
iFeatures (only in conjunction with KEY-PLUG or
SCALANCE W722-1 RJ45))
iPCF (industrial Point Coordination Function):
The iPCF mode is a good choice for applications with requirements for real-time and predictable response times (deterministic response), even when mobile nodes are roaming from
one access point to the next. This ensures that wireless
PROFINET IO is supported and that safety-related signals,
e.g. emergency stop, can be linked into the RF field.
The iPCF mechanism expands the IEEE 802.11 standard and
must be available on both the client module and the access
point. In an RF field in which iPCF is used, no IEEE 802.11-compliant nodes can be operated.
iPCF is recommended for applications where wireless network
nodes move along predefined paths (e.g. suspended monorail).
RCoax radiating cables or directional antennas must be used for
this purpose.
RCoax Cable Segment 1
Client Module
SCALANCE
W722-1 RJ45
Panel PC
WinAC
Client Module
SCALANCE
W722-1 RJ45
Panel PC
Client Module
SCALANCE
W722-1 RJ45
Access Point
SCALANCE
W784-1RR in
the cabinet
Panel PC
WinAC
WinAC
IWLAN RCoax Cable
IWLAN RCoax Cable
6
G_IK10_XX_30172
Access Point
SCALANCE
W784-1RR in
the cabinet
RCoax Cable Segment 2
Linking in an automated guided vehicle system using iPCF with the SCALANCE W722-1 RJ45
iPCF-MC (iPCF Management Channel) 1):
iPCF-MC is available as a further development of iPCF.
This mode should be used if IWLAN stations that also support
iPCF-MC move freely about in the coverage area (especially
when using omni-directional antennas) and are to exchange
data deterministically. This functionality can only be achieved in
connection with access points with two wireless interfaces and
the KEY PLUG.
Note:
These iFeatures cannot be used in parallel.
1)
Available soon
6/94
Siemens IK PI · 2015
Diagnostics and management
• Web-based (HTTP/HTTPS) management tool for configuration
and diagnostics using a standard browser
• LEDs for signaling operating status and fault/error states
• Signaling of faults by means of SNMP trap or e-mail to a
network management tool
• Configuration and diagnostics using Web based
Management, Command Line Interface, and SNMP. Devices
and networks can be configured using STEP 7 (TIA Portal).
For cyclic monitoring, diagnostics and documentation
(reporting) in network mode, the SINEMA Server software is
recommended.
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Client Modules IEEE 802.11n
SCALANCE W748 RJ45 for use in control cabinet
• Suitable for applications where the client module is to be
mounted in the control cabinet
■ Design
• Rugged aluminum enclosure, shock and vibration-proof,
for high mechanical requirements
• Dust protection with IP30 degree of protection
• For use at ambient temperatures from -20 °C to +60 °C
• 3 x R-SMA sockets for the connection of directly mountable
and remote antennas (6 x R-SMA sockets for the variants with
two wireless modules)
• Antenna placement optimized for the 3x3 MIMO technology;
the antennas do not interfere with each other when they are
mounted directly on the device
• 1 x RJ45 connector for 10/100/1 000 Mbit/s with Power-overEthernet according to IEEE 802.3at
• 2 x 24 V DC connection for redundant energy supply
• 1 x PLUG compartment for KEY-PLUG/C-PLUG
• Function LEDs for optical signaling of faults/errors and
operating statuses
• Digital input for feeding in a signal from a sensor, for example,
to an SNMP-based network management system
• Digital output for converting a command received over SNMP
into a signal and switching a hardware function
• Mounting: Wall, S7-1500 mounting rail, S7-300 mounting rail,
or on 35 mm standard mounting rail
3x R-SMA (female) antenna connections
6
PLUG
slot
Terminal block for
digital input/output
24 V DC
connection
RJ45 connection
(Gigabit)
*B,.B;;B
■ Overview
Design and interfaces of the SCALANCE W748-1 RJ45 client modules
Product versions
SCALANCE W748-1 RJ45
• A radio card is permanently installed; functional scope can be
expanded by using a KEY-PLUG W780 iFeatures
Siemens IK PI · 2015
6/95
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Client Modules IEEE 802.11n
SCALANCE W748 RJ45 for use in control cabinet
■ Function
S7-400
Radio cell 1
Radio cell 2
Industrial Ethernet
Field PG/
Notebook
Access Point
SCALANCE
W788-2 M12
PC
6
Client Module
SCALANCE
W748-1 RJ45
SIMATIC HMI
SCALANCE
X208
S7-300
SCALANCE
X208
Client Module
SCALANCE
W748-1 RJ45
SIMATIC HMI
PC
S7-300
The controllers log on via the Ethernet client modules W748-1
RJ45 in the RF field and can move around freely there. This, for
example, makes it possible to operate an automated guided
vehicle system.
6/96
Siemens IK PI · 2015
SIMATIC HMI
PC
SCALANCE
X208
Automated Guided Vehicle System (AGVS)
Mobile controls in an automated guided vehicle system
SIMATIC HMI
S7-300
G_IK10_XX_30347
Client Module
SCALANCE
W748-1 RJ45
Access Point
SCALANCE
W788-2 M12
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Client Modules IEEE 802.11n
SCALANCE W748 RJ45 for use in control cabinet
■ Technical specifications
Article No.
6GK5748-1FC00-0AA0
6GK5748-1FC00-0AB01)
Article No.
6GK5748-1FC00-0AA0
6GK5748-1FC00-0AB01)
Product-type designation
SCALANCE W748-1 RJ45
Product-type designation
SCALANCE W748-1 RJ45
450 Mbit/s
10 … 1 000 Mbit/s
-
Effective power loss
• at 24V for DC typical
10.7 W
10.7 W
• with Power-over-Ethernet
according to IEEE802.3at for type 1
and IEEE802.3af typical
• with Power-over-Ethernet
10.7 W
according to IEEE802.3at for type 2
typical
Transmission rate
Transmission rate
• with W-LAN maximum
• with Industrial Ethernet
• note
Interfaces
Number of electrical connections
• for network components
• and terminal equipment
• for power supply
• for redundant power supply
Design of electrical connection
• for network components
and terminal equipment
• for power supply
Design of the removable storage
C-PLUG
1
Permitted ambient conditions
1
1
Ambient temperature
• during operating
• during storage
• during transport
RJ45 socket
4-pole screw terminal, PoE
90 %
Relative humidity at 25 °C without
condensation during operating maximum
Yes
Protection class IP
IP30
Ambient condition for (standard)
operation mode
When used under hazardous
conditions (Zone 2),
the product must be installed in an
enclosure. To comply with EN 50021,
this enclosure must meet the requirements of at least IP54 in compliance
with EN 60529.
Interfaces wireless
Number of radio cards permanently
installed
1
Number of internal antennas
-
Number of electrical connections
for external antenna(s)
3
Design of the electrical connection
for external antenna(s)
R-SMA (socket)
Product property external antenna
can be mounted directly on device
Yes
Signal-Inputs/outputs
Number of digital inputs
Number of digital outputs
Design of electrical connection
at the digital inputs/outputs
Signal range
• at digital input
• at the digital output
1
1
4-pole screw terminal
24 V DC, safety extra-low voltage
24 V DC /1 A
Supply voltage, current consumption, power loss
Type of supply voltage
Supply voltage
• 1 from terminal block
• 2 from terminal block
• from Power-over-Ethernet according
IEEE802.3at for type 1 and
IEEE802.3af
• from Power-over-Ethernet according
IEEE802.3at for type 2
Design, dimensions and weight
Width of enclosure without antenna
200 mm
Height of enclosure without antenna
158 mm
Depth of enclosure without antenna
79 mm
Net weight
1.7 kg
Mounting type wall mounting
Yes
Mounting type
S7-300 rail mounting
6
Wireless frequencies
Radio frequency
• for WLAN in 2.4 GHz
frequency band
• for WLAN in 5 GHz
frequency band
2.41 … 2.48 GHz
4.9 … 5.8 GHz
Product properties, functions,
components general
DC
19.2 V
28.8 V
48 V
50 V
Current consumed
• at 24 V with DC typical
0.45 A
• with Power-over-Ethernet according 0.22 A
to IEEE802.3at for type 1 and
IEEE802.3af typical
• with Power-over-Ethernet according 0.21 A
to IEEE802.3at for type 2 typical
1)
-20 … +60 °C
-40 … +70 °C
-40 … +70 °C
Product function
• Access Point Mode
• Client Mode
No
Yes
Number of SSIDs
-
Product function
• iPCF Access Point
• iPCF client
• iPCF-MC Access Point
• iPCF-MC client
Yes
in preparation
Number of iPCF-capable radio
modules
1
Wireless approval in the USA
Siemens IK PI · 2015
6/97
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Client Modules IEEE 802.11n
SCALANCE W748 RJ45 for use in control cabinet
■ Technical specifications (continued)
Article No.
6GK5748-1FC00-0AA0
6GK5748-1FC00-0AB01)
Product-type designation
SCALANCE W748-1 RJ45
Product functions management,
configuration
6
Protocol is supported
• Address Resolution Protocol (ARP)
• ICMP
• Telnet
• HTTP
• HTTPS
• TFTP
• SNMP v1
• SNMP v2
• SNMP v3
• DCP
• LLDP
Yes
Yes
Yes
Yes
in preparation
in preparation
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Identification & maintenance function
• I&M0 - device-specific information Yes
• I&M1 – higher level designation/lo- Yes
cation designation
Product functions Diagnosis
Product function
• PROFINET IO diagnosis
• localization via Aeroscout
• SysLog
in preparation
Yes
Product functions VLAN
Product function function VLAN with
IWLAN
6GK5748-1FC00-0AA0
6GK5748-1FC00-0AB01)
Product-type designation
SCALANCE W748-1 RJ45
Product functions Security
Number of manageable IP addresses 8
in client
Product function
• CLI
• web-based management
• MIB support
• TRAPs via email
• Configuration with STEP 7
• configuration with STEP 7
in the TIA Portal
• operation with IWLAN controller
• operation with Enterasys WLAN
controller
• forced roaming with IWLAN
• WDS
Article No.
No
Product functions DHCP
Product function
• DHCP client
Yes
• in Client Mode DHCP server via LAN No
Product function
• ACL - MAC-based
• Management security, ACL-IP based
• IEEE 802.1x (radius)
• NAT/NAPT
• access protection according to
IEEE802.11i
• WPA/WPA2
• TKIP/AES
Protocol is supported SSH
-
Protocol is supported
• SNTP
• SIMATIC Time
Wireless approval in the USA
6/98
Siemens IK PI · 2015
Yes
Yes
Yes
Standards, specifications, approvals
Standard
• for hazardous zone
• for safety of CSA and UL
Verification of suitability
• CE mark
• EC declaration of conformity
• C-Tick
• CCC
• Railway application in accordance
with EN 50155
• e1 approval
• E1 approval
• NEMA4X
• Power-over-Ethernet according
IEEE802.3at for type 1 and
IEEE802.3af
• Power-over-Ethernet according to
IEEE802.3at for type 2
Standard for wireless communication
• IEEE 802.11a
• IEEE 802.11b
• IEEE 802.11e
• IEEE 802.11g
• IEEE 802.11h
• IEEE 802.11i
• IEEE 802.11n
Wireless approval
EN 60079-15:2005, EN 600790:2006, II 3 G Ex nA II T4 KEMA 07
ATEX 0145X
UL 60950-1 CSA C22.2 No. 60950-1
Yes
Yes
Yes
No
No
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
You will find the current list
of countries at:
www.siemens.com/wireless-approvals
Accessories
Accessories
1)
Yes
Yes
Product functions Time
Product functions Redundancy
Protocol is supported STP/RSTP
Yes
Yes
No
Yes
24 V DC screw terminal and screw
terminal for digital input and output
included in the scope of delivery
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Client Modules IEEE 802.11n
SCALANCE W748 RJ45 for use in control cabinet
■ Ordering data
Article No.
Article No.
SCALANCE W748 client modules
Accessories
IWLAN Ethernet client modules
with built-in wireless interface;
wireless networks
IEEE 802.11a/b/g/h/n
at 2.4/5 GHz up to 450 Mbps;
WPA2/AES;
Power over Ethernet (PoE),
IP30 degree of protection
(-20 °C to +60 °C);
scope of supply:
Mounting hardware,
4-pin screw terminal for 24 V DC;
4-pin screw terminal for digital input
and output;
manual on CD-ROM;
German/English
KEY-PLUG W740 iFeatures
C-PLUG
6GK1900-0AB00
Swap medium for simple replacement of devices if a fault occurs;
for storing configuration data;
can be used in SIMATIC NET products with PLUG compartment
DIN rail mounting adapter
SCALANCE W748-1 RJ45
For managing the wireless connection of up to eight linked devices
with Industrial Ethernet connection;
degree of protection IP30
• National approvals
for operation outside the USA
• National approvals
for operation within the USA1)
6GK5907-4PA00
Swap medium for enabling
additional iFeatures, for simple
device replacement if a fault occurs
and for storage of configuration data;
Can be used in SCALANCE W client
modules with PLUG compartment
6GK5748-1FC00-0AA0
6GK5798-8ML00-0AB3
DIN rail mounting adapter for
SCALANCE W788 M12 and
SCALANCE W788 RJ45;
screw fixing for mounting on a
35 mm DIN rail to EN 50 022;
scope of supply: 3 units per pack
IE FC RJ45 Plug 4 x 2
6GK5748-1FC00-0AB0
RJ45 plug-in connector for Industrial
Ethernet (10/100/1 000 Mbps)
with a rugged metal enclosure and
integrated insulation displacement
contacts for connecting Industrial
Ethernet FC installation cables;
180° cable outlet;
for network components and
CPs/CPUs with Industrial Ethernet
interface
• 1 pack = 1 unit
• 1 pack = 10 units
• 1 pack = 50 units
6GK1901-1BB11-2AA0
6GK1901-1BB11-2AB0
6GK1901-1BB11-2AE0
IE FC Standard Cable GP 4 x 2
6XV1878-2A
6
8-core, shielded TP installation cable
for connection to IE FC RJ45 Plug
4 x 2 and IE M12 Plug PRO 4 x 2;
PROFINET-compliant;
with UL approval;
sold by the meter;
max. length 1 000 m,
minimum order quantity 20 m
IE FC Stripping Tool
6GK1901-1GA00
Preadjusted stripping tool
for fast stripping of Industrial
Ethernet FC cables
Antennas and miscellaneous
IWLAN accessories
1)
See Industrial Wireless LAN/
accessories
Please note national approvals under
http://www.siemens.com/wireless-approvals
■ More information
Selection tools:
Wireless approvals:
To assist in selecting Industrial Ethernet components, the TIA
Selection Tool is available at:
http://www.siemens.com/tia-selection-tool
Current approvals can be found on the Internet at:
http://www.siemens.com/wireless-approvals
Siemens IK PI · 2015
6/99
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Client Modules IEEE 802.11n
SCALANCE W748 M12 for indoor use
■ Overview
■ Design
• Particularly suitable for industrial applications without control
cabinets
• Rugged aluminum enclosure, shock and vibration-proof,
for high mechanical requirements
• High IP65 degree of protection against dust and water jets
• For use at ambient temperatures from -20 °C to +60 °C
• 3 x N-Connect sockets for the connection of directly
mountable and remote antennas (6 x N-Connect sockets for
the variants with two wireless modules)
• Antenna placement optimized for the 3x3 MIMO technology;
the antennas do not interfere with each other when they are
mounted directly on the device
• 1 x M12 connection for 10/100/1 000 Mbit/s with Power-overEthernet according to IEEE 802.3at
• 1 x M12 socket for power supply (24 V DC)
• 1 x PLUG slot (for KEY-PLUG/C-PLUG)
• Function LEDs for optical signaling of faults/errors and
operating statuses
• Mounting: Wall, S7-1500 mounting rail, S7-300 mounting rail,
or on 35 mm standard mounting rail
3x N-Connect (female) connections for antennas
24 V DC
connection
PLUG slot
M12 connection
(Gigabit)
n†prXW††ZWY_\
6
Design and interfaces of the SCALANCE W748-1 M12 client modules
Product versions
SCALANCE W748-1 M12
• A radio card is permanently installed;
functional scope can be expanded by using a KEY-PLUG
W780 iFeatures
6/100
Siemens IK PI · 2015
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Client Modules IEEE 802.11n
SCALANCE W748 M12 for indoor use
■ Function
S7-400
Radio cell 1
Radio cell 2
Industrial Ethernet
Field PG/
Notebook
Access Point
SCALANCE
W788-2 M12
Client Module
SCALANCE
W748-1 M12
PC
SCALANCE
X208
SIMATIC HMI
S7-300
Client Module
SCALANCE
W748-1 M12
SIMATIC HMI
PC
SCALANCE
X208
SIMATIC HMI
S7-300
SIMATIC HMI
PC
SCALANCE
X208
S7-300
G_IK10_XX_30282
Client Module
SCALANCE
W748-1 M12
Access Point
SCALANCE
W788-2 M12
Automated Guided Vehicle System (AGVS)
Mobile controls in an automated guided vehicle system
The controllers log on in the RF field via the Ethernet client
modules W748-1 M12, which are mounted directly on the
vehicle, and can move around freely within this field. This, for
example, makes it possible to operate an automated guided
vehicle system.
Siemens IK PI · 2015
6/101
6
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Client Modules IEEE 802.11n
SCALANCE W748 M12 for indoor use
■ Technical specifications
Article No.
6GK5748-1GD00-0AA0
6GK5748-1GD00-0AB01)
Product-type designation
SCALANCE W748-1 M12
450 Mbit/s
10 … 1 000 Mbit/s
-
Interfaces
Number of electrical connections
• for network components
and terminal equipment
• for power supply
• for redundant power supply
Design of electrical connection
• for network components
and terminal equipment
• for power supply
1
1
1
SCALANCE W748-1 M12
Ambient temperature
• during operating
• during storage
• during transport
-
Design of optical interface
for optical waveguide at 100 Mbit/s
Yes
-20 … +60 °C
-40 … +70 °C
-40 … +70 °C
Relative humidity at 25 °C without
condensation during operating
maximum
100 %
Protection class IP
IP65
Ambient condition for (standard)
operation mode
When used under hazardous
conditions (Zone 2),
the product must be installed in an
enclosure. To comply with EN 50021,
this enclosure must meet the requirements of at least IP54 in compliance
with EN 60529.
M12 interface (4-pole, A-coded), PoE
Interfaces wireless
6
Product-type designation
M12 interface (8-pole, A-coded), PoE
Number of optical interfaces
for optical waveguide at 100 Mbit/s
Design of the removable storage
C-PLUG
6GK5748-1GD00-0AA0
6GK5748-1GD00-0AB01)
Permitted ambient conditions
Transmission rate
Transmission rate
• with W-LAN maximum
• with Industrial Ethernet
• note
Article No.
Design, dimensions and weight
Width of enclosure without antenna
200 mm
Height of enclosure without antenna
176 mm
Depth of enclosure without antenna
79 mm
Net weight
1.7 kg
Mounting type wall mounting
Yes
Mounting type
S7-300 rail mounting
Number of radio cards permanently
installed
1
Number of internal antennas
-
Number of electrical connections
for external antenna(s)
3
Design of the electrical connection
for external antenna(s)
N-Connect (socket)
Radio frequency
• for WLAN in 2.4 GHz frequency
2.41 … 2.48 GHz
band
• for WLAN in 5 GHz frequency band 4.9 … 5.8 GHz
Product property external antenna
can be mounted directly on device
Yes
Product properties, functions,
components general
Wireless frequencies
Supply voltage,
current consumption, power loss
Type of supply voltage
Supply voltage
• 1 from M12 Power Connector (Acoded) for redundant power supply
• 2 from M12 Power Connector (Acoded) for redundant power supply
• from Power-over-Ethernet according
IEEE802.3at for type 1 and
IEEE802.3af
• from Power-over-Ethernet according
IEEE802.3at for type 2
DC
19.2 V
28.8 V
48 V
Active power loss
• at 24V for DC typical
10.7 W
• with Power-over-Ethernet according 10.7 W
to IEEE802.3at for type 1 and
IEEE802.3af typical
• with Power-over-Ethernet according 10.7 W
to IEEE802.3at for type 2 typical
Wireless approval in the USA
6/102
Siemens IK PI · 2015
No
Yes
Number of SSIDs
1
Product function
• iPCF Access Point
• iPCF client
• iPCF-MC Access Point
• iPCF-MC client
Yes
in preparation
Number of iPCF-capable radio
modules
50 V
Current consumed
• at 24 V with DC typical
0.45 A
• with Power-over-Ethernet according 0.22 A
to IEEE802.3at for type 1 and
IEEE802.3af typical
• with Power-over-Ethernet according 0.21 A
to IEEE802.3at for type 2 typical
1)
Product function
• Access Point Mode
• Client Mode
1
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Client Modules IEEE 802.11n
SCALANCE W748 M12 for indoor use
■ Technical specifications (continued)
Article No.
6GK5748-1GD00-0AA0
6GK5748-1GD00-0AB01)
Product-type designation
SCALANCE W748-1 M12
Product functions management,
configuration
Protocol is supported
• Address Resolution Protocol (ARP)
• ICMP
• Telnet
• HTTP
• HTTPS
• TFTP
• SNMP v1
• SNMP v2
• SNMP v3
• DCP
• LLDP
Yes
Yes
Yes
Yes
in preparation
in preparation
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Identification & maintenance function
• I&M0 - device-specific information Yes
Yes
• I&M1 – higher level designation/
location designation
Product functions Diagnosis
Product function
• PROFINET IO diagnosis
• localization via Aeroscout
• SysLog
Product-type designation
SCALANCE W748-1 M12
Protocol is supported
• SNTP
• SIMATIC Time
Yes
Yes
Standards, specifications,
approvals
Standard
• for hazardous zone
• for safety of CSA and UL
Verification of suitability
• CE mark
• EC declaration of conformity
• C-Tick
• CCC
• Railway application in accordance
with EN 50155
• e1 approval
• E1 approval
• NEMA4X
• Power-over-Ethernet according
IEEE802.3at for type 1 and
IEEE802.3af
• Power-over-Ethernet according to
IEEE802.3at for type 2
Standard for wireless communication
• IEEE 802.11a
• IEEE 802.11b
• IEEE 802.11e
• IEEE 802.11g
• IEEE 802.11h
• IEEE 802.11i
• IEEE 802.11n
Wireless approval
in preparation
Yes
EN 60079-15:2005, EN 600790:2006, II 3 G Ex nA II T4 KEMA 07
ATEX 0145X
UL 60950-1 CSA C22.2 No. 60950-1
Yes
Yes
Yes
No
No
No
No
No
Yes
Yes
6
Yes
Yes
Yes
Yes
Yes
Yes
Yes
You will find the current list
of countries at:
www.siemens.com/wireless-approvals
Accessories
Accessories
Product functions VLAN
Product function function VLAN with
IWLAN
6GK5748-1GD00-0AA0
6GK5748-1GD00-0AB01)
Product functions Time
Number of manageable IP addresses 8
in client
Product function
• CLI
• web-based management
• MIB support
• TRAPs via email
• Configuration with STEP 7
• configuration with STEP 7
in the TIA Portal
• operation with IWLAN controller
• operation with Enterasys WLAN
controller
• forced roaming with IWLAN
• WDS
Article No.
-
No
Product functions DHCP
Product function
• DHCP client
• in Client Mode DHCP server
via LAN
Yes
No
Product functions Redundancy
Protocol is supported STP/RSTP
-
Product functions Security
Product function
• ACL - MAC-based
• Management security, ACL-IP based
• IEEE 802.1x (radius)
• NAT/NAPT
• access protection according to
IEEE802.11i
• WPA/WPA2
• TKIP/AES
Protocol is supported SSH
1)
Yes
Yes
No
Yes
Yes
Yes
Yes
Wireless approval in the USA
Siemens IK PI · 2015
6/103
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Client Modules IEEE 802.11n
SCALANCE W748 M12 for indoor use
■ Ordering data
Article No.
Article No.
SCALANCE W748 client modules
Accessories
IWLAN Ethernet client modules
with built-in wireless interface;
wireless networks
IEEE 802.11a/b/g/h/n at 2.4/5 GHz
up to 450 Mbps;
WPA2/AES;
Power over Ethernet (PoE),
IP65 degree of protection
(-20 °C to +60 °C);
scope of supply:
Mounting hardware;
manual on CD-ROM,
German/English
KEY-PLUG W740 iFeatures
C-PLUG
6GK1900-0AB00
Swap medium for simple replacement of devices in the event of a
fault; for storing configuration data;
can be used in SIMATIC NET
products with PLUG compartment
SCALANCE W748-1 M12
For managing the wireless
connection of up to eight linked
devices with Industrial Ethernet
connection
• National approvals
for operation outside the USA
• National approvals
• for operation within the USA 1)
6GK5907-4PA00
Swap medium for enabling
additional iFeatures, for simple
device replacement if a fault occurs
and for storage of configuration data;
Can be used in SCALANCE W client
modules with PLUG compartment
DIN rail mounting adapter
6GK5748-1GD00-0AA0
6GK5748-1GD00-0AB0
6GK5798-8ML00-0AB3
DIN rail mounting adapter
for SCALANCE W788 M12 and
SCALANCE W788 RJ45;
screw fixing for mounting on a
35 mm DIN rail to EN 50 022;
scope of supply: 3 units per pack
IE FC M12 Plug PRO 4 x 2
6
M12 plug-in connector suitable
for on-site assembly
(X-coded, IP65/IP67),
metal enclosure,
insulation displacement fast connection method, for SCALANCE W
• 1 unit
• 8 units
6GK1901-0DB30-6AA0
6GK1901-0DB30-6AA8
IE FC Standard Cable GP 4 x 2
6XV1878-2A
8-core, shielded TP installation cable
for connection to IE FC RJ45 Plug
4 x 2 and IE M12 Plug PRO 4 x 2;
PROFINET-compliant;
with UL approval;
sold by the meter;
max. length 1 000 m,
minimum order quantity 20 m
IE FC Stripping Tool
6GK1901-1GA00
Preadjusted stripping tool
for fast stripping of the Industrial
Ethernet FC cables
Power M12 Cable Connector PRO
6GK1 907-0DC10-6AA3
Terminal socket for connection
of SCALANCE W700 for 24 V DC
supply voltage;
4-pole, A-coded,
with assembly instructions, 3 units
Power Cable 2 x 0.75
6XV1 812-8A
Connecting cable for Power M12
Cable Connector PRO,
sold by the meter
Antennas and miscellaneous
IWLAN accessories
1)
See Industrial Wireless LAN/
accessories
Please note national approvals under
http://www.siemens.com/wireless-approvals
■ More information
Selection tools:
Wireless approvals:
To assist in selecting Industrial Ethernet components, the TIA
Selection Tool is available at:
http://www.siemens.com/tia-selection-tool
Current approvals can be found on the Internet at:
http://www.siemens.com/wireless-approvals
6/104
Siemens IK PI · 2015
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Client Modules IEEE 802.11n
SCALANCE W734 RJ45 for use in control cabinet
■ Overview
• Client modules in SIMATIC design suitable for applications
where the device is to be mounted in the control cabinet
■ Design
• Low-profile, compact aluminum enclosure, shock and
vibration-proof for high mechanical requirements
• Implementation of simple and cost-effective wireless machine
networking
• Support of the 2.4 and 5 GHz frequency band
• IP30 degree of protection
• For use at ambient temperatures from -20 °C to +60 °C
• 2 x R-SMA sockets for the connection of direct mountable and
remote antennas
• Antenna placement optimized for the 2x2 MIMO technology;
the antennas do not interfere with each other when they are
mounted directly on the device
• 2 x RJ45 connector for 10/100 Mbit/s, of which one connector
has Power-over-Ethernet compliant with IEEE 802.3at
• 2 x 24 V DC connection for redundant energy supply
• 1 x PLUG compartment for KEY-PLUG/C-PLUG
• Function LEDs for optical signaling of faults/errors and
operating statuses
• Mounting: Wall, S7-1500 mounting rail, S7-300 mounting rail,
or on 35 mm standard mounting rail
• SIMATIC design matches existing components in the control
cabinet (e.g. ET 200MP, etc.)
PLUG slot and
reset button
2x antenna connections
R-SMA (female)
6
24 V DC connection
2x RJ45 connection
10/100 Mbit/s with
integrated 2 port
switch;
1 port supports PoE
IEEE 802.3at
n†prXW††ZWZZY
SIMATIC ET 200MP station with SCALANCE W734 RJ45
Design and interfaces of the SCALANCE W734 RJ45 client modules
Product versions
SCALANCE W734-1 RJ45
• A radio card is permanently installed; functional scope can be
expanded by using a KEY-PLUG W740 iFeatures
Siemens IK PI · 2015
6/105
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Client Modules IEEE 802.11n
SCALANCE W734 RJ45 for use in control cabinet
■ Function
Radio cell
RCoax Cable
Access Point
SCALANCE W774-1 RJ45
+ KEY-PLUG W780 iFeatures
Antenna
ANT792-4DN
6
Use of the SCALANCE W734-1 RJ45 in a suspended monorail
6/106
Siemens IK PI · 2015
G_IK10_XX_30171
Hanger 5
Hanger 4
Hanger 3
Hanger 2
Hanger 1
Client Module SCALANCE W734-1 RJ45
+ KEY-PLUG W740 iFeatures
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Client Modules IEEE 802.11n
SCALANCE W734 RJ45 for use in control cabinet
■ Technical specifications
Article No.
6GK5734-1FX00-0AA0
6GK5734-1FX00-0AB01)
Product-type designation
SCALANCE W734-1 RJ45
300 Mbit/s
10 … 100 Mbit/s
-
Interfaces
Number of electrical connections
• for network components
and terminal equipment
• for power supply
• for redundant power supply
Design of the electrical connection
• for network components
and terminal equipment
• for power supply
6GK5734-1FX00-0AA0
6GK5734-1FX00-0AB01)
Product-type designation
SCALANCE W734-1 RJ45
Permitted ambient conditions
Transmission rate
Transmission rate
• with W-LAN maximum
• with Industrial Ethernet
• note
Article No.
2
1
1
Ambient temperature
• during operating
• during storage
• during transport
97 %
Relative humidity at 25 °C without
condensation during operating maximum
Protection class IP
IP30
Ambient condition for (standard)
operation mode
When used under hazardous
conditions (Zone 2), the SCALANCE
W774-1 RJ45 or W734-1 RJ45 product must be installed in an enclosure.
To comply with EN 50021, this
enclosure must meet the requirements of at least IP5 in compliance
with EN 60529.
RJ45 socket
4-pole screw terminal, PoE
Number of optical interfaces
for optical waveguide at 100 Mbit/s
-
Design of optical interface
for optical waveguide at 100 Mbit/s
-
Design of the removable storage
C-PLUG
Yes
Design, dimensions and weight
Interfaces wireless
Width of enclosure without antenna
26 mm
Height of enclosure without antenna
147 mm
Depth of enclosure without antenna
127 mm
Net weight
0.52 kg
Mounting type wall mounting
Yes
Mounting type
Wall mounting only if flat mounted
Number of radio cards permanently
installed
1
Number of internal antennas
-
Wireless frequencies
Number of electrical connections for
external antenna(s)
2
Radio frequency
• for WLAN in 2.4 GHz
frequency band
• for WLAN in 5 GHz
frequency band
Design of the electrical connection for R-SMA (socket)
external antenna(s)
Product property external antenna
can be mounted directly on device
Yes
Supply voltage
• 1 from terminal block
• 2 from terminal block
• from Power-over-Ethernet according
IEEE802.3at for type 1 and
IEEE802.3af
• from Power-over-Ethernet according
IEEE802.3at for type 2
2.41 … 2.48 GHz
4.9 … 5.8 GHz
Product properties, functions, components general
Supply voltage, current consumption, power loss
Type of supply voltage
-20 … +60 °C
-40 … +85 °C
-40 … +85 °C
DC
19.2 V
28.8 V
48 V
-
Current consumed
• at 24 V with DC typical
0.25 A
• with Power-over-Ethernet according 0.125 A
to IEEE802.3at for type 1 and
IEEE802.3af typical
• with Power-over-Ethernet according to IEEE802.3at for type 2 typical
Product function
• Access Point Mode
• Client Mode
No
Yes
Number of SSIDs
-
Product function
• iPCF Access Point
• iPCF client
• iPCF-MC Access Point
• iPCF-MC client
Yes
Yes
Number of iPCF-capable radio
modules
1
Effective power loss
• at 24V for DC typical
6W
• with Power-over-Ethernet according 6 W
to IEEE802.3at for type 1 and
IEEE802.3af typical
• with Power-over-Ethernet according to IEEE802.3at for type 2 typical
1)
Wireless approval in the USA
Siemens IK PI · 2015
6/107
6
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Client Modules IEEE 802.11n
SCALANCE W734 RJ45 for use in control cabinet
■ Technical specifications (continued)
Article No.
6GK5734-1FX00-0AA0
6GK5734-1FX00-0AB01)
Product-type designation
SCALANCE W734-1 RJ45
Product functions management,
configuration
6
Protocol is supported
• Address Resolution Protocol (ARP)
• ICMP
• Telnet
• HTTP
• HTTPS
• TFTP
• SNMP v1
• SNMP v2
• SNMP v3
• DCP
• LLDP
Yes
Yes
Yes
Yes
in preparation
in preparation
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Product functions Diagnosis
in preparation
No
Yes
Product function
• ACL - MAC-based
• Management security,
ACL-IP based
• IEEE 802.1x (radius)
• NAT/NAPT
• access protection according to
IEEE802.11i
• WPA/WPA2
• TKIP/AES
No
Yes
Yes
No
Yes
Yes
Yes
Yes
Product functions Time
Protocol is supported
• SNTP
• SIMATIC Time
Yes
Yes
Standards, specifications,
approvals
Standard
• for hazardous zone
• for safety of CSA and UL
Verification of suitability
• CE mark
• EC declaration of conformity
• C-Tick
• CCC
• Railway application in accordance
with EN 50155
• e1 approval
• E1 approval
• NEMA4X
• Power-over-Ethernet according
IEEE802.3at for type 1 and
IEEE802.3af
• Power-over-Ethernet according to
IEEE802.3at for type 2
No
Yes
No
Wireless approval
Product functions DHCP
Product function
• DHCP client
• in Client Mode DHCP server
via LAN
SCALANCE W734-1 RJ45
Standard for wireless communication
• IEEE 802.11a
• IEEE 802.11b
• IEEE 802.11e
• IEEE 802.11g
• IEEE 802.11h
• IEEE 802.11i
• IEEE 802.11n
Product functions VLAN
Product function function VLAN with
IWLAN
Product-type designation
Protocol is supported SSH
-
Identification & maintenance function
• I&M0 - device-specific information Yes
• I&M1 – higher level designation/lo- Yes
cation designation
Product function
• PROFINET IO diagnosis
• localization via Aeroscout
• SysLog
6GK5734-1FX00-0AA0
6GK5734-1FX00-0AB01)
Product functions Security
Number of manageable IP addresses 8
in client
Product function
• CLI
• web-based management
• MIB support
• TRAPs via email
• Configuration with STEP 7
• configuration with STEP 7
in the TIA Portal
• operation with IWLAN controller
• operation with Enterasys WLAN
controller
• forced roaming with IWLAN
• WDS
Article No.
in preparation
Yes
Yes
Yes
-
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
You will find the current list
of countries at:
www.siemens.com/wireless-approvals
Accessories
Accessories
1)
Wireless approval in the USA
6/108
Siemens IK PI · 2015
24 V DC screw terminal included
in scope of delivery
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Client Modules IEEE 802.11n
SCALANCE W734 RJ45 for use in control cabinet
■ Ordering data
Article No.
■ More information
SCALANCE W734 Client Modules
Selection tools:
IWLAN Ethernet client modules
with built-in wireless interface;
wireless networks
IEEE 802.11a/b/g/h/n at 2.4/5 GHz
up to 300 Mbit/s;
WPA2/AES;
integrated 2-port switch;
Power over Ethernet (PoE),
IP30 degree of protection
(-20 °C to +60 °C);
scope of delivery:
Mounting hardware,
4-pin screw terminal for 24V DC;
manual on CD-ROM;
German/English
To assist in selecting Industrial Ethernet components, the TIA
Selection Tool is available at:
http://www.siemens.com/tia-selection-tool
Wireless approvals:
Current approvals can be found on the Internet at:
http://www.siemens.com/wireless-approvals
SCALANCE W734-1 RJ45
for managing the wireless connection of up to eight linked devices
with Industrial Ethernet connection
• National approvals
for operation outside the USA
• National approvals
for operation within the USA 1)
6GK5734-1FX00-0AA0
6GK5734-1FX00-0AB0
Accessories
KEY-PLUG W740 iFeatures
6GK5907-4PA00
Swap medium for enabling additional iFeatures, for simple device
replacement if a fault occurs and for
storage of configuration data;
can be used in SCALANCE W client
modules with PLUG compartment
C-PLUG
6
6GK1900-0AB00
Swap medium for simple replacement of devices if a fault occurs;
for storing configuration data;
can be used in SIMATIC NET
products with PLUG compartment
IE FC RJ45 Plug 180 2 x 2
RJ45 plug connector for
Industrial Ethernet with a rugged
metal enclosure and integrated
insulation-displacement contacts
for connecting Industrial Ethernet
FC installation cables;
with a 180° cable outlet;
for network components and
CPs/CPUs with Industrial Ethernet
interface
• 1 pack = 1 unit
• 1 pack = 10 units
• 1 pack = 50 units
6GK1901-1BB10-2AA0
6GK1901-1BB10-2AB0
6GK1901-1BB10-2AE0
IE FC Standard Cable GP 2 x 2
6XV1840-2AH10
4-core, shielded TP installation
cable for connection to IE FC outlet
RJ45 plug / IE FC RJ45 plug;
PROFINET-compliant;
with UL approval
Sold by the meter
max. quantity 1 000 m
minimum order 20 m
IE FC Stripping Tool
6GK1901-1GA00
Preadjusted stripping tool
for fast stripping of the Industrial
Ethernet FC cables
Antennas and miscellaneous
IWLAN accessories
1)
See Industrial Wireless
LAN/accessories
Please note national approvals under
http://www.siemens.com/wireless approvals
Siemens IK PI · 2015
6/109
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Client Modules IEEE 802.11n
SCALANCE W722 RJ45 for use in control cabinet
■ Overview
■ Design
• Compact design for space-saving installation in control
cabinets or boxes on a standard mounting rail
• Implementation of simple and cost-effective wireless machine
networking
• Support of the 2.4 and 5 GHz frequency band
• Degree of protection IP20
• For use at ambient temperatures from 0 °C to +55 °C
• 1 x R-SMA socket for the connection of a remote antenna
• 1 x RJ45 port for 10/100 Mbit/s
• 1 x 24 V DC connection
• Function LEDs for optical signaling of faults/errors and
operating statuses
• SIMATIC design matches existing components in the control
cabinet (e.g. ET 200SP, etc.)
• Low-cost Client Module, suitable for applications where the
device is to be mounted in the control cabinet
• Equipped with iFeatures
1 x antenna connection
R-SMA (female)
24 V DC connection
(rear)
Reset button
RJ45 connection for
10/100 Mbit/s (front)
n†prXW††ZWZZX
6
Design and interfaces of the SCALANCE W722 RJ45 client modules
Product versions
SCALANCE W722-1 RJ45
• A wireless card permanently installed in the device;
suitable for establishing wireless connections with iFeatures
SIMATIC ET 200SP station with SCALANCE W722 RJ45
6/110
Siemens IK PI · 2015
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Client Modules IEEE 802.11n
SCALANCE W722 RJ45 for use in control cabinet
■ Function
RCoax Cable Segment 1
Client Module
SCALANCE
W722-1 RJ45
Panel PC
Client Module
SCALANCE
W722-1 RJ45
Panel PC
WinAC
Client Module
SCALANCE
W722-1 RJ45
Access Point
SCALANCE
W784-1RR in
the cabinet
Panel PC
WinAC
WinAC
IWLAN RCoax Cable
IWLAN RCoax Cable
G_IK10_XX_30172
Access Point
SCALANCE
W784-1RR in
the cabinet
RCoax Cable Segment 2
Integration of an automated guided vehicle system using iPCF with the SCALANCE W722-1 RJ45
■ Technical specifications
Article No.
6GK5722-1FC00-0AA0
6GK5722-1FC00-0AB01)
Article No.
6GK5722-1FC00-0AA0
6GK5722-1FC00-0AB01)
Product-type designation
SCALANCE W722-1 RJ45
Product-type designation
SCALANCE W722-1 RJ45
Transmission rate
Transmission rate
• with W-LAN maximum
• with Industrial Ethernet
• note
Supply voltage,
current consumption, power loss
150 Mbit/s
10 … 100 Mbit/s
-
Interfaces
Number of electrical connections
• for network components
and terminal equipment
• for power supply
• for redundant power supply
Design of the electrical connection
• for network components
and terminal equipment
• for power supply
1
1
0
RJ45 socket
3-pole screw terminal
Number of optical interfaces
for optical waveguide at 100 Mbit/s
-
Design of optical interface
for optical waveguide at 100 Mbit/s
-
Design of the removable storage
C-PLUG
No
Interfaces wireless
Number of radio cards permanently
installed
1
Number of internal antennas
-
Number of electrical connections
for external antenna(s)
1
Design of the electrical connection
for external antenna(s)
R-SMA (socket)
Product property external antenna
can be mounted directly on device
Yes
1)
6
Type of supply voltage
Supply voltage
• 1 from terminal block
• 2 from terminal block
• from Power-over-Ethernet
according IEEE802.3at for type 1
and IEEE802.3af
• from Power-over-Ethernet
according IEEE802.3at for type 2
DC
19.2 V
28.8 V
-
-
Current consumed
• at 24 V with DC typical
0.15 A
• with Power-over-Ethernet
according to IEEE802.3at for type 1
and IEEE802.3af typical
• with Power-over-Ethernet
according to IEEE802.3at for type 2
typical
Effective power loss
• at 24V for DC typical
3.6 W
• with Power-over-Ethernet
according to IEEE802.3at for type 1
and IEEE802.3af typical
• with Power-over-Ethernet
according to IEEE802.3at for type 2
typical
Wireless approval in the USA
Siemens IK PI · 2015
6/111
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Client Modules IEEE 802.11n
SCALANCE W722 RJ45 for use in control cabinet
■ Technical specifications (continued)
Article No.
6GK5722-1FC00-0AA0
6GK5722-1FC00-0AB01)
Product-type designation
SCALANCE W722-1 RJ45
Permitted ambient conditions
Ambient temperature
• during operating
• during storage
• during transport
0 … 55 °C
-40 … +85 °C
-40 … +85 °C
Protection class IP
IP20
Ambient condition for (standard)
operation mode
When used under hazardous
conditions (Zone 2), the SCALANCE
W761-1 RJ45 or W72x-1 RJ45 product must be installed in an enclosure.
To comply with EN 50021, this
enclosure must meet the requirements of at least IP54 in compliance
with EN 60529.
Design, dimensions and weight
Width of enclosure without antenna
50 mm
Height of enclosure without antenna
114 mm
Depth of enclosure without antenna
74 mm
Net weight
0.13 kg
Mounting type wall mounting
No
Wireless frequencies
Radio frequency
• for WLAN in 2.4 GHz frequency
2.41 … 2.48 GHz
band
• for WLAN in 5 GHz frequency band 4.9 … 5.8 GHz
Product properties, functions, components general
Product function
• Access Point Mode
• Client Mode
No
Yes
Number of SSIDs
-
Product function
• iPCF Access Point
• iPCF client
• iPCF-MC Access Point
• iPCF-MC client
Yes
Yes
Number of iPCF-capable radio modules
6GK5722-1FC00-0AA0
6GK5722-1FC00-0AB01)
Product-type designation
SCALANCE W722-1 RJ45
Product functions management,
configuration
Relative humidity at 25 °C without
95 %
condensation during operating maximum
6
Article No.
1
Number of manageable IP addresses 4
in client
Product function
• CLI
• web-based management
• MIB support
• TRAPs via email
• Configuration with STEP 7
• configuration with STEP 7
in the TIA Portal
• operation with IWLAN controller
• operation with Enterasys WLAN
controller
• forced roaming with IWLAN
• WDS
Protocol is supported
• Address Resolution Protocol (ARP)
• ICMP
• Telnet
• HTTP
• HTTPS
• TFTP
• SNMP v1
• SNMP v2
• SNMP v3
• DCP
• LLDP
Yes
Yes
Yes
Yes
in preparation
in preparation
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Identification & maintenance function
• I&M0 - device-specific information Yes
Yes
• I&M1 – higher level designation/
location designation
Product functions Diagnosis
Product function
• PROFINET IO diagnosis
• Link Check
• connection monitoring IP-Alive
• localization via Aeroscout
• SysLog
No
No
No
No
Yes
Product functions VLAN
Product function function VLAN with
IWLAN
No
Product functions DHCP
Product function
• DHCP client
Yes
• in Client Mode DHCP server via LAN No
6/112
Siemens IK PI · 2015
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Client Modules IEEE 802.11n
SCALANCE W722 RJ45 for use in control cabinet
■ Technical specifications (continued)
Article No.
6GK5722-1FC00-0AA0
6GK5722-1FC00-0AB01)
Product-type designation
SCALANCE W722-1 RJ45
Product functions Security
Product function
• ACL - MAC-based
• Management security,
ACL-IP based
• IEEE 802.1x (radius)
• NAT/NAPT
• access protection according to
IEEE802.11i
• WPA/WPA2
• TKIP/AES
Protocol is supported SSH
No
Yes
Yes
No
Yes
Yes
Yes
Yes
Verification of suitability
• CE mark
• EC declaration of conformity
• C-Tick
• CCC
• Railway application in accordance
with EN 50155
• e1 approval
• E1 approval
• NEMA4X
• Power-over-Ethernet according
IEEE802.3at for type 1 and
IEEE802.3af
• Power-over-Ethernet according to
IEEE802.3at for type 2
Standard for wireless communication
• IEEE 802.11a
• IEEE 802.11b
• IEEE 802.11e
• IEEE 802.11g
• IEEE 802.11h
• IEEE 802.11i
• IEEE 802.11n
Wireless approval
IWLAN Ethernet Client Modules
with iFeatures support and built-in
wireless interface; wireless networks
IEEE 802.11a/b/g/h/n at 2.4/5 GHz
up to 150 Mbit/s; WPA2/AES;
IP20 degree of protection
(0 °C to +55 °C);
scope of delivery:
Mounting hardware,
3-pin screw terminal for 24V DC;
manual on CD-ROM;
German/English
for administration of the wireless
connection with iFeatures from
a connected device with Industrial
Ethernet connection
• National approvals
for operation outside the USA
• National approvals
for operation within the USA 1)
6GK5722-1FC00-0AA0
6GK5722-1FC00-0AB0
Accessories
Standards, specifications,
approvals
Standard
• for hazardous zone
• for safety of CSA and UL
SCALANCE W722 Client Modules
SCALANCE W722-1 RJ45
Yes
Yes
Product functions Time
Protocol is supported
• SNTP
• SIMATIC Time
■ Ordering data
IE FC RJ45 Plug 180 2 x 2
in preparation
Yes
Yes
Yes
-
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
RJ45 plug connector for Industrial
Ethernet with a rugged metal
enclosure and integrated insulationdisplacement contacts for connecting
Industrial Ethernet FC installation
cables;
with a 180° cable outlet;
for network components and
CPs/CPUs with Industrial Ethernet
interface
• 1 pack = 1 unit
6GK1901-1BB10-2AA0
6GK1901-1BB10-2AB0
• 1 pack = 10 units
• 1 pack = 50 units
6GK1901-1BB10-2AE0
IE FC Standard Cable GP 2 x 2
6
6XV1840-2AH10
4-core, shielded TP installation cable
for connection to IE FC outlet RJ45
plug / IE FC RJ45 plug;
PROFINET-compliant;
with UL approval
Sold by the meter
max. quantity 1 000 m
minimum order 20 m
IE FC Stripping Tool
6GK1901-1GA00
Preadjusted stripping tool
for fast stripping of the Industrial
Ethernet FC cables
Antennas and miscellaneous
IWLAN accessories
See Industrial Wireless LAN/
accessories
You will find the current list
of countries at:
www.siemens.com/wireless-approvals
Accessories
Accessories
1)
Wireless approval in the USA
24 V DC screw terminal included
in scope of delivery
1)
Please note national approvals under
http://www.siemens.com/wireless-approvals
■ More information
Selection tools:
To assist in selecting Industrial Ethernet components, the TIA
Selection Tool is available at:
http://www.siemens.com/tia-selection-tool
Wireless approvals:
Current approvals can be found on the Internet at:
http://www.siemens.com/wireless-approvals
Siemens IK PI · 2015
6/113
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Client Modules IEEE 802.11n
SCALANCE W721 RJ45 for use in control cabinet
■ Overview
■ Design
• Compact design for space-saving installation in control
cabinets or boxes on a standard mounting rail
• Implementation of simple and cost-effective wireless machine
networking
• Support of the 2.4 and 5 GHz frequency band
• Degree of protection IP20
• For use at ambient temperatures from 0 °C to +55 °C
• 1 x R-SMA socket for the connection of a remote antenna
• 1 x RJ45 port for 10/100 Mbit/s
• 1 x 24 V DC connection
• Function LEDs for optical signaling of faults/errors and
operating statuses
• SIMATIC design matches existing components in the control
cabinet (e.g. ET 200SP, etc.)
• Low-cost Client Module, suitable for applications where the
device is to be mounted in the control cabinet
1 x antenna connection
R-SMA (female)
24 V DC connection
(rear)
Reset button
RJ45 connection for
10/100 Mbit/s (front)
Design and interfaces of the SCALANCE W721 RJ45 client modules
Product versions
SCALANCE W721-1 RJ45
• A wireless card permanently installed in the device;
6/114
Siemens IK PI · 2015
n†prXW††ZWZZX
6
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Client Modules IEEE 802.11n
SCALANCE W721 RJ45 for use in control cabinet
■ Integration
Antenna
ANT793-4MN
Antenna
ANT793-4MN
IWLAN RCoax
radiating cable
Antenna
ANT793-4MN
Storage retrieval
machine
SCALANCE
W721-1 RJ45
and ET 200SP
IWLAN RCoax
radiating cable
Storage retrieval
machine
SCALANCE
W721-1 RJ45
and ET 200SP
IWLAN RCoax
radiating cable
Control cabinet
Central control unit
SIMATIC ET 200S with
SCALANCE W761-1 RJ45
and SCALANCE XB005
Storage retrieval
machine
SCALANCE
W721-1 RJ45
and ET 200SP
IWLAN RCoax
radiating cable
Antenna
cable
Antenna
cable
Antenna
cable
SCALANCE
W761-1 RJ45
SCALANCE
W761-1 RJ45
SCALANCE
W761-1 RJ45
Industrial Ethernet/PROFINET
G_IK10_XX_30334
Storage retrieval
machine
SCALANCE
W721-1 RJ45
and ET 200SP
Antenna
cable
Antenna
ANT793-4MN
Storage and retrieval systems in high-bay warehouses automated with SCALANCE W721-1 RJ45, W761-1 RJ45 and RCoax
■ Technical specifications
Article No.
6GK5721-1FC00-0AA0
6GK5721-1FC00-0AB01)
Product-type designation
SCALANCE W721-1 RJ45
Transmission rate
Transmission rate
• with W-LAN maximum
• with Industrial Ethernet
• note
Design of the electrical connection
• for network components
and terminal equipment
• for power supply
150 Mbit/s
10 … 100 Mbit/s
-
1
1
0
Product-type designation
SCALANCE W721-1 RJ45
Number of radio cards permanently
installed
1
Number of internal antennas
-
Number of electrical connections
for external antenna(s)
1
Design of the electrical connection
for external antenna(s)
R-SMA (socket)
Product property external antenna
can be mounted directly on device
Yes
RJ45 socket
3-pole screw terminal
Number of optical interfaces
for optical waveguide at 100 Mbit/s
-
Design of optical interface
for optical waveguide at 100 Mbit/s
-
Design of the removable storage
C-PLUG
No
1)
6GK5721-1FC00-0AA0
6GK5721-1FC00-0AB01)
Interfaces wireless
Interfaces
Number of electrical connections
• for network components
and terminal equipment
• for power supply
• for redundant power supply
Article No.
Wireless approval in the USA
Siemens IK PI · 2015
6/115
6
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Client Modules IEEE 802.11n
SCALANCE W721 RJ45 for use in control cabinet
■ Technical specifications (continued)
Article No.
6GK5721-1FC00-0AA0
6GK5721-1FC00-0AB01)
Product-type designation
SCALANCE W721-1 RJ45
Supply voltage,
current consumption, power loss
Type of supply voltage
Supply voltage
• 1 from terminal block
• 2 from terminal block
• from Power-over-Ethernet
according IEEE802.3at for type 1
and IEEE802.3af
• from Power-over-Ethernet
according IEEE802.3at for type 2
DC
19.2 V
28.8 V
-
-
Effective power loss
• at 24V for DC typical
3.6 W
• with Power-over-Ethernet
according to IEEE802.3at for type 1
and IEEE802.3af typical
• with Power-over-Ethernet
according to IEEE802.3at for type 2
typical
Permitted ambient conditions
Ambient temperature
• during operating
• during storage
• during transport
6GK5721-1FC00-0AA0
6GK5721-1FC00-0AB01)
Product-type designation
SCALANCE W721-1 RJ45
Product properties, functions,
components general
Current consumed
• at 24 V with DC typical
0.15 A
• with Power-over-Ethernet
according to IEEE802.3at for type 1
and IEEE802.3af typical
• with Power-over-Ethernet
according to IEEE802.3at for type 2
typical
6
Article No.
0 … 55 °C
-40 … +85 °C
-40 … +85 °C
Relative humidity at 25 °C without
condensation during operating
maximum
95 %
Protection class IP
IP20
Ambient condition for (standard)
operation mode
When used under hazardous
conditions (Zone 2), the SCALANCE
W761-1 RJ45 or W72x-1 RJ45 product must be installed in an enclosure.
To comply with EN 50021, this
enclosure must meet the requirements of at least IP54 in compliance
with EN 60529.
Design, dimensions and weight
Width of enclosure without antenna
50 mm
Height of enclosure without antenna
114 mm
Depth of enclosure without antenna
74 mm
Net weight
0.13 kg
Mounting type wall mounting
No
Wireless frequencies
Radio frequency
• for WLAN in 2.4 GHz frequency
2.41 … 2.48 GHz
band
• for WLAN in 5 GHz frequency band 4.9 … 5.8 GHz
Product function
• Access Point Mode
• Client Mode
No
Yes
Number of SSIDs
-
Product function
• iPCF Access Point
• iPCF client
• iPCF-MC Access Point
• iPCF-MC client
-
Number of iPCF-capable radio
modules
-
Product functions management,
configuration
Number of manageable IP addresses 4
in client
Product function
• CLI
• web-based management
• MIB support
• TRAPs via email
• Configuration with STEP 7
• configuration with STEP 7
in the TIA Portal
• operation with IWLAN controller
• operation with Enterasys WLAN
controller
• forced roaming with IWLAN
• WDS
Protocol is supported
• Address Resolution Protocol (ARP)
• ICMP
• Telnet
• HTTP
• HTTPS
• TFTP
• SNMP v1
• SNMP v2
• SNMP v3
• DCP
• LLDP
Yes
Yes
Yes
Yes
in preparation
in preparation
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Identification & maintenance function
• I&M0 - device-specific information Yes
• I&M1 – higher level designation/
Yes
location designation
Product functions Diagnosis
Product function
• PROFINET IO diagnosis
• localization via Aeroscout
• SysLog
No
No
Yes
Product functions VLAN
Product function function VLAN with
IWLAN
No
Product functions DHCP
Product function
• DHCP client
• in Client Mode DHCP server
via LAN
6/116
Siemens IK PI · 2015
Yes
No
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Client Modules IEEE 802.11n
SCALANCE W721 RJ45 for use in control cabinet
■ Technical specifications (continued)
Article No.
6GK5721-1FC00-0AA0
6GK5721-1FC00-0AB01)
Product-type designation
SCALANCE W721-1 RJ45
Product functions Security
Product function
• ACL - MAC-based
• Management security,
ACL-IP based
• IEEE 802.1x (radius)
• NAT/NAPT
• access protection
according to IEEE802.11i
• WPA/WPA2
• TKIP/AES
Protocol is supported SSH
No
Yes
Yes
No
Yes
Yes
Yes
Yes
Product functions Time
Protocol is supported
• SNTP
• SIMATIC Time
Yes
Yes
Standards, specifications,
approvals
Standard
• for hazardous zone
• for safety of CSA and UL
Verification of suitability
• CE mark
• EC declaration of conformity
• C-Tick
• CCC
• Railway application
in accordance with EN 50155
• e1 approval
• E1 approval
• NEMA4X
• Power-over-Ethernet
according IEEE802.3at for type 1
and IEEE802.3af
• Power-over-Ethernet
according to IEEE802.3at for type 2
Standard for wireless communication
• IEEE 802.11a
• IEEE 802.11b
• IEEE 802.11e
• IEEE 802.11g
• IEEE 802.11h
• IEEE 802.11i
• IEEE 802.11n
Wireless approval
in preparation
Yes
Yes
Yes
-
No
No
Article No.
SCALANCE W721 Client Modules
IWLAN Ethernet Client Modules with
built-in wireless interface; wireless
networks IEEE 802.11a/b/g/h/n at
2.4/5 GHz up to 150 Mbit/s;
WPA2/AES; IP20 degree of protection
(0 °C to +55 °C);
scope of delivery: Mounting
hardware, 3-pin screw terminal for
24V DC; manual on CD-ROM;
German/English
SCALANCE W721-1 RJ45
For administration of the wireless
connection from a connected device
with Industrial Ethernet connection
• National approvals for operation
outside the USA
• National approvals for operation
within the USA 1)
6GK5721-1FC00-0AA0
6GK5721-1FC00-0AB0
Accessories
IE FC RJ45 Plug 180 2 x 2
RJ45 plug connector for Industrial
Ethernet with a rugged metal
enclosure and integrated insulationdisplacement contacts for connecting Industrial Ethernet FC installation
cables; with a 180° cable outlet; for
network components and CPs/CPUs
with Industrial Ethernet interface
• 1 pack = 1 unit
• 1 pack = 10 units
• 1 pack = 50 units
6GK1901-1BB10-2AA0
6GK1901-1BB10-2AB0
6GK1901-1BB10-2AE0
IE FC Standard Cable GP 2 x 2
6XV1840-2AH10
6
4-core, shielded TP installation cable
for connection to IE FC outlet RJ45
plug / IE FC RJ45 plug;
PROFINET-compliant;
with UL approval;
sold by the meter; max. quantity
1 000 m, minimum order 20 m
IE FC Stripping Tool
6GK1901-1GA00
Preadjusted stripping tool for fast
stripping of the Industrial Ethernet FC
cables
Yes
Yes
Yes
Yes
Yes
Yes
Yes
You will find the current list
of countries at:
www.siemens.com/wireless-approvals
Accessories
Accessories
■ Ordering data
24 V DC screw terminal included
in scope of delivery
Antennas and miscellaneous
IWLAN accessories
1)
See Industrial Wireless LAN/
accessories
Please note national approvals under
http://www.siemens.com/wireless-approvals
■ More information
Selection tools:
To assist in selecting Industrial Ethernet components, the TIA
Selection Tool is available at:
http://www.siemens.com/tia-selection-tool
Wireless approvals:
Current approvals can be found on the Internet at:
http://www.siemens.com/wireless-approvals
1)
Wireless approval in the USA
Siemens IK PI · 2015
6/117
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Accessories
IWLAN antennas
■ Overview
■ Benefits
• Investment protection thanks to compliance with the globally
recognized standard IEEE 802.11 and – depending on the
version – suitability for 2.4 GHz and/or 5 GHz
• Cost-effective connection to devices in remote, difficult-toaccess, or hostile environments
• Establishment of a reliable IWLAN wireless infrastructure
through the use of remote antennas, even if the access points
and client modules are installed in the cabinet, for example
■ Application
6
Remote antennas increase the reliability of wireless links by
optimizing the receiving and emission of signals.
• Use in Industrial Wireless LAN (IWLAN) and WLAN in
accordance with IEEE 802.11 at 2.4 GHz and 5 GHz with
transmission rates of up to 450 Mbit/s
• Coordinated range of antennas for the most diverse applications both indoors and outdoors
• Antennas with two (dual-slant) or three (MIMO) connections
for increased data throughput and increased reliability of the
wireless connection thanks to selective use of multiple path
propagation
• Suitable for use in hazardous areas (Zone 2); no special
approvals necessary
Separate antennas optimize the transmission and receiving
conditions and support the use of IWLAN products in a number
of industrial applications.
With sector antennas, for example, conveyor lines or corridors
can be specifically covered with radio links, or strongly
directional antennas can be used to implement point-to-point
connections over distances of up to several 1 000 meters.
Alternatively, an omnidirectional antenna concentrates the radio
field around the antenna in the shape of a disc, which enhances
the quality of the connection.
Antennas with two or three connections enable transmission of
the two to three streams usual with IEEE 802.11n, using just one
antenna. They are available both with omnidirectional and
directional characteristics.
Application examples:
Omnidirectional antennas
• Coverage of an area which has at its center a pole for
mounting the antenna
• Installation of the antenna on the roof in the case of automated
guided vehicle systems for reliable data exchange with the
vehicles
• Wide-area coverage of a production cell or robot station
Sector antennas
• Selective coverage of warehouse/high-bay warehouse aisles
with the help of a wide-angle antenna prevents interference
with neighboring wireless fields
Directional antennas
• Communication between buildings over long distances with
the help of an antenna with narrow opening angle and high
gain
6/118
Siemens IK PI · 2015
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Accessories
IWLAN antennas
●
●
ANT795-4MC
●
ANT795-4MD
●
ANT795-6MN
●
●
5
●
SCALANCE
W760/W720
●
SCALANCE
W770/W730
ANT795-4MA
2.4
SCALANCE
W780/W740
●
ANT792-8DN
●
ANT793-8DP
●
ANT793-8DJ
●
ANT793-8DK
●
RCoax
radiating
cables
2.4 GHz
●
●
●
ANT792-4DN
●
●
●
RCoax
radiating
cables
5 GHz
●
●
●
ANT793-4MN
●
●
●
Antennas
●
Frequency
range (GHz)
●
Type of antenna
SCALANCE
W760/W720
ANT792-6MN
directional
SCALANCE
W770/W730
2,4
2.4
and
und
5
SCALANCE
W780/W740
omnidirektional
omnidirectional
2,4
2.4
Antennen
Antennas
Frequency
Frequenz
(GHz) (GHz)
range
Antennenart
Type
of antenna
■ Design
2.4
Sektor
Sector
2,4
2.4
and
und
5
ANT793-6MN
●
●
ANT795-6DC
●
●
ANT793-6DG
●
●
ANT793-6DT
●
●
5
6
G_IK10_XX_30317
5
●
RCoax
ANT795-6MT
5
Omnidirectional and sector antennas
IWLAN directional antennas and RCoax radiating cable
Siemens IK PI · 2015
6/119
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Accessories
IWLAN antennas
■ Function
Separate antennas are used to optimize the radio field for the
application. In industrial applications, this permits a reliable
radio link.
Antennas with multiple connections
(dual or MIMO antennas)
Antennas with two connections combine two individual
antennas, at 90° to each other, in a single antenna enclosure.
With these antennas, two data streams can be transferred
simultaneously thanks to the two different polarization levels.
Depending on the alignment of the polarization levels, these
antennas are referred to as dual-slant (rotated through +/-45°)
or vertical-horizontal.
Antennas with three connections contain three individual emitters that can be combined in a single enclosure, either on different polarization levels (0°, +/-45°) or at a suitable distance from
each other. The MIMO antennas can transmit or receive three
data streams simultaneously using multiple path propagation.
Transmission of several data streams results in increased data
throughput and simultaneously a more reliable data transfer.
Directional effect
The suitable antenna is selected first by means of the wireless
field characteristic. A distinction is made between omnidirectional antennas and directional antennas.
Omnidirectional antennas
G_IK10_XX_30027
Horizontal
opening
angle
With omnidirectional antennas, the radio field is emitted in every
direction surrounding the antenna (horizontal opening angle:
360°), but it weakens as the distance increases. There is a
concentration in the vertical direction which creates passive
amplification of the radio field. Many omnidirectional antennas
have extremely weak radiation directly below the antenna due to
their type of construction. This property can be seen in the
associated antenna diagram.
ANT795-4Mx
With these omnidirectional antennas, the radio field is concentrated at 2.4 GHz and 5 GHz in the vertical plane of the antenna.
All antennas of this type have an opening angle of 30° in the
vertical direction and an antenna gain of 3/5 dBi. They are
directly mounted on the R-SMA or N connector of the
SCALANCE W enclosure.
Siemens IK PI · 2015
The ANT795-4MA antenna features an additional joint, an
R-SMA connector, and degree of protection IP30. It is therefore
optimally suitable for the SCALANCE W788 RJ45, W770 and
W760 Access Points and the SCALANCE W748 RJ45, W730 and
W720 Client Modules.
ANT792-6MN, ANT793-6MN
With these omnidirectional antennas, the radio field is concentrated at 2.4 GHz (ANT792-6MN) and 5 GHz (ANT793-6MN) in
the vertical plane of the antenna. The antennas have a gain of
6 dBi and 5 dBi respectively.
N-Connect is used as the connection plug and can be connected to SCALANCE W over an antenna connection cable from
the range of IWLAN cabling. Both antennas are supplied with a
mounting aid (metal bracket) that supports wall or mast mounting. The antennas are therefore ideally suited, for example, to
providing radio coverage for a place that has a mast at its center
on which they can be mounted.
ANT795-6MN, antenna mounting tool for ANT795-6MN
N-Connect is used as connection plug. The antenna can be
connected to SCALANCE W over an antenna connection cable
from the IWLAN cabling systems range. The antenna characteristic is such that good transmission properties also exist directly
above and below the antenna. It is designed for mounting on a
control cabinet or roof, but it can also be mounted under a roof,
so it is suitable, for example, for the mobile units of an automated
guided vehicle system. If it needs to be installed on a ceiling
under a roof, the optional antenna mounting tool for
ANT795-6MN is used.
Omnidirectional antenna
6/120
The ANT795-4MC and ANT 795-4MD antennas can be rotated
around only one axis, they have N-Connect connectors and
degree of protection IP65 and are used with the SCALANCE
W788 M12 Access Points and the SCALANCE W748 M12 Client
Modules.
With this omnidirectional antenna, the radio field is concentrated
at 2.4 GHz and 5 GHz in the vertical plane of the antenna. The
antenna has a gain of 6 dBi and 8 dBi respectively.
6
Vertical
opening
angle
ANT795-4MA, ANT795-4MC and ANT795-4MD
ANT795-6MT
This antenna is an omnidirectional MIMO antenna with three
QMA connections. The wireless field is concentrated at 2.4 GHz
and 5 GHz in the vertical plane of the antenna. The antenna has
a gain of 6 dBi.
The antenna characteristic is such that good transmission
properties also exist directly above and below the antenna. It is
designed for mounting on a roof or (together with the supplied
mounting bracket) under a ceiling, and it is thus suitable, for
example, for the mobile units of automated guided vehicle
systems.
The ANT795-6MT is connected to the SCALANCE W-780/W740
Access Points via QMA/N-Connect male/female IWLAN adapter
cables and the IWLAN flexible antenna connection cables in the
relevant length and connector version.
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Accessories
IWLAN antennas
■ Function (continued)
ANT792-8DN, ANT793-8DP, ANT 793-8DJ and ANT793-8DK
Directional antennas
These strongly directional antennas enable genuine amplification of the radio field. The radio field is concentrated in a narrow
cone due to the narrow opening angle. High passive gains and
long ranges are therefore achieved.
Due to the high passive gain, the antennas are ideally suited to
bridging large distances.
The ANT792-8DN antenna is suitable for the 2.4 GHz frequency
band and has an antenna gain of 14 dBi.
Vertical
opening angle
ANT793-8DP is an antenna with a high gain (13.5 dBi) in a
compact enclosure. It is suitable for the frequency band from 4.9
to 5.35 GHz and therefore preferably for applications in Japan.
G_IK10_XX_30028
Horizontal
opening angle
ANT793-8DJ (18 dBi) and ANT793-8DK (23 dBi) are strongly
directional antennas with vertical-horizontal polarization. They
each have two N-Connect connections.
Antenna for SCALANCE W-700
Directional antenna
4
2
2,4 GHz
4
medium gain
3
5 GHz
6
high gain
8
very high
gain
5
2,4 + 5 GHz
–
D
D
Directivity
–
x
directional
antenna
omnidiM rectional
antenna
G_IK10_XX_30288
The radio field can be aligned at 2.4 GHz and 5 GHz using these
sector antennas. Each has an antenna gain of 9 dBi.
2
Gain
ANT795-6DC, ANT793-6DG and ANT793-6DT
ANT79
Frequency
With directional antennas, the radio field is emitted both in the
horizontal and vertical plane in the range of the opening angle.
It is concentrated in these areas and generates passive
amplification. Based on the opening angle, directional antennas
are divided into sector or wide-angle antennas (opening angle >
approx. 30°) and strongly directional antennas.
Directional antennas are ideally suited to wall or mast mounting.
The supplied mounting aid is used for a targeted adjustment.
N-Connect is generally used as connection plug. The antenna
can be connected to SCALANCE W over an antenna connection
cable from the IWLAN cabling systems range.
The antenna name indicates the properties of the IWLAN antennas
Thanks to their characteristics, they are suitable, for example, for
providing wireless coverage for an area in front of a wall.
The ANT795-6DC antenna is suitable for both frequency bands
2.4 and 5 GHz. It has an N-Connect connection. Together with a
SCALANCE W780 or W770, two or three antennas of this type
can also be used for covering multiple sectors.
ANT793-6DG is a dual-slant antenna with two N-Connect connections for the 5 GHz frequency band.
ANT793-6DT is a MIMO antenna with three QMA connections for
the 5 GHz band.
The ANT795-6DT is connected to the SCALANCE W-780/W740
Access Points via QMA/N-Connect male/female IWLAN adapter
cables and the IWLAN flexible antenna connection cables in the
relevant length and connector version.
Siemens IK PI · 2015
6/121
6
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Accessories
IWLAN antennas
■ Function (continued)
Antennas especially for use with RCoax radiating cables
ANT792-4DN
These antennas have been specially developed for use with the
RCoax radiating cable. They are preferably used in environments in which nodes move within limited areas or exclusively
along predefined paths. Typical applications are suspended
monorails or high-bay racking systems where the antenna is
within the near field of the radiating cable.
The radio field is aligned at 2.4 GHz for this antenna. The antenna has a gain of 4 dBi. The polarization of the antenna is
circular, i.e. the receive path of the signals of both polarizations
is amplified equally well. Signal strength fluctuations are weaker
at 2.4 GHz.
ANT793-4MN
With this omni-directional antenna, the radio field is concentrated at 5 GHz in the vertical plane of the antenna. The antenna
has a gain of 6 dBi at 5.2 GHz and 5 dBi at 5.7 GHz. The polarization of the antenna is vertical (5/8 characteristic). N-Connect
is used as connection plug. The antenna can be connected to
SCALANCE W by means of an antenna connection cable from
the IWLAN cabling systems range.
N-Connect is used as connection plug. The antenna can be
connected to SCALANCE W by means of an antenna connection
cable from the IWLAN cabling systems range.
■ Integration
SCALANCE W774-1RJ45 with detached antenna (frontal)
SCALANCE W774-1RJ45 with detached antenna (lateral)
Antenne ANT793-6DG
6GK5 793-6DG00-0AA0
IWLAN RCoax Antenna
N-Connect/N-Connect
Female/Female
Panel Feedthrough
6GK5 798-2PP00-2AA6
Antenne ANT795-6MN
6GK5 795-6MN10-0AA6
IWLAN RCoax
N-Connect/N-Connect
Male/Male Flexible
Connection Cable
1m = 6XV1875-5AH10
IWLAN RCoax Antenna
N-Connect/N-Connect
Female/Female
Panel Feedthrough
6GK5 798-2PP00-2AA6
IWLAN RCoax N-Connect/R-SMA
Male/Male Flexible Connection Cable
1m = 6XV1 875-5CH10
5m = 6XV1 875-5CH50
IWLAN RCoax N-Connect/R-SMA
Male/Male Flexible Connection Cable
1m = 6XV1 875-5CH10
5m = 6XV1 875-5CH50
SCALANCE W774-1 RJ45
6GK5 774-1FX00-0AA0 (RoW)
6GK5 774-1FX00-0AB0 (USA)
SCALANCE W774-1 RJ45
6GK5 774-1FX00-0AA0 (RoW)
6GK5 774-1FX00-0AB0 (USA)
G_IK10_XX_30316
6
IWLAN RCoax
N-Connect/N-Connect
Male/Male Flexible
Connection Cable
1m = 6XV1875-5AH10
Antenne ANT795-6MN
6GK5 795-6MN10-0AA6
Control cabinet
W774-1 RJ45 with remote antennas
6/122
Siemens IK PI · 2015
Control cabinet
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Accessories
IWLAN antennas
■ Integration (continued)
Antenna ANT793-6MN connected to SCALANCE W761-1 RJ45 (frontal)
MIMO antenna ANT795-6MT connected to SCALANCE W788-2 M12
with N-Connect ports
Antenne ANT793-6MN
6GK5 793-6MN00-0AA6
IWLAN Antenna
ANT795-6MT
6GK5 795-6MT00-0AA0
IWLAN RCoax Antenna
N-Connect/N-Connect
Female/Female
Panel Feedthrough
6GK5 798-2PP00-2AA6
QMA/N-Connect
Male/Female
Flexible Connection Cable
6XV1 875-5JH10
(Scope of delivery: 3 items)
IWLAN RCoax
N-Connect/N-Connect
Male/Male Flexible
Connection Cable
1m = 6XV1875-5AH10
IWLAN RCoax N-Connect/R-SMA
Male/Male Flexible Connection Cable
1m = 6XV1 875-5CH10
5m = 6XV1 875-5CH50
Lightning protector
6GK5 798-2LP10-2AA6
(Scope of delivery: 1 items)
G_IK10_XX_30314
SCALANCE W761-1 RJ45
6GK5761-1FC00-0AA0 (RoW)
6GK5761-1FC00-0AB0 (USA)
IWLAN N-Connect/
N-Connect Male/Male
Flexible Connection Cable
2 m = 6XV1 875-5AH20
(Scope of delivery: 1 items)
Control cabinet
SCALANCE W788-2 M12
6GK5 788-2GD00-0AA0
G_IK10_XX_30315
6
SCALANCE W761-1 RJ45 and SCALANCE W788-2 M12 with remote antennas
Siemens IK PI · 2015
6/123
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Accessories
IWLAN antennas
■ Integration (continued)
Dual Slant antenna ANT793-6DG connected to
SCALANCE W788-2 RJ45 with R-SMA ports
Dual Slant antenna ANT793-6DG connected to
SCALANCE W788-2 M12 with N-Connect ports
IWLAN Antenna
ANT793-6DG
6GK5 793-6DG00-0AA0
IWLAN N-Connect/N-Connect
Male/Male
Flexible Connection Cable
1 m = 6XV1 875-5AH10
IWLAN N-Connect / R-SMA
Male/Male
Flexible Connection Cable
5 m = 6XV1 875-5CH50
IWLAN Antenna
ANT793-6DG
6GK5 793-6DG00-0AA0
IWLAN N-Connect/N-Connect
Male/Male
Flexible Connection Cable
1 m = 6XV1 875-5AH10
Lightning protector
6GK5 798-2LP10-2AA6
Lightning protector
6GK5 798-2LP10-2AA6
IWLAN N-Connect/
N-Connect
Female/Female
Panel Feedthrough
6GK5 798-2PP00-2AA6
IWLAN N-Connect/
N-Connect
Female/Female
Panel Feedthrough
6GK5 798-2PP00-2AA6
Resistance
6GK5 795-1TR10-0AA6
IWLAN N-Connect / N-Connect
Male/Male
Flexible Connection Cable
5 m = 6XV1 875-5AH50
Resistance
6GK5 795-1TN00-1AA0
IWLAN N-Connect/
R-SMA Male/Male
Flexible Connection Cable
0,3 m = 6XV1 875-5CE30
SCALANCE W788-2 RJ45
6GK5 788-2FC00-0AA0
SCALANCE W788-2 M12
6GK5 788-2GD00-0AA0
SCALANCE W788-1 RJ45 access points with dual slant antenna and SCALANCE W788-1 M12 with N-Connect connection
All antennas can be used with an N-Connect female connector.
6/124
Siemens IK PI · 2015
G_IK10_XX_30272
6
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Accessories
IWLAN antennas
■ Technical specifications
Article No.
6GK5795-4MC00-0AA3
6GK5795-4MD00-0AA3
6GK5795-4MA00-0AA3
Product-type designation
Antenna ANT795-4MC
Antenna ANT795-4MD
Antenna ANT795-4MA
2.4 … 2.4835 GHz
2.4 … 2.4835 GHz
2.4 … 2.4835 GHz
5.15 … 5.35 GHz
5.15 … 5.35 GHz
5.15 … 5.35 GHz
5.725 … 5.85 GHz
5.725 … 5.85 GHz
5.725 … 5.85 GHz
Impedance
50 
50 
50 
Polarization
linear vertical
linear vertical
linear vertical
Radiation characteristic
omnidirectional
omnidirectional
omnidirectional
Antenna gain compared to spherical
radiator with linear radiation
-
-
-
Antenna gain compared to spherical
radiator with circular radiation
-
-
-
Antenna gain compared to spherical
radiator of the WLAN antenna in the
2.4 GHz frequency band
3 dB
3 dB
3 dB
Antenna gain compared to spherical
radiator of the WLAN antenna in the
5 GHz frequency band
5 dB
5 dB
5 dB
2
2
360°
-
360°
-
360°
-
360°
-
360°
-
360°
-
Opening angle Note
-
-
-
Number of electrical connections of
antenna
1
1
1
Design of electrical connection of
antenna
N connector
N connector
R-SMA connector
Angle of inclination downward
maximum
0°
0°
0°
Crosstalk attenuation between the
antenna connections
-
-
-
Front-to-back ratio
-
-
-
Transmit power maximum
-
-
-
Transmit power Note
-
-
-
Range with clear line of sight without
disturbance
-
-
-
Range Note
-
-
-
Ambient temperature
• during operating
• during storage
• during transport
• during installation
-20 … +65 °C
-20 … +65 °C
-20 … +65 °C
-
-20 … +65 °C
-20 … +65 °C
-20 … +65 °C
-
-20 … +65 °C
-20 … +65 °C
-20 … +65 °C
-
Protection class IP
IP65
IP65
IP30
Wind load maximum
-
-
-
Wind load Note
-
-
-
Wireless frequencies
Radio frequency
• for WLAN
in 2.4 GHz frequency band
• for WLAN
in 5 GHz frequency band 1
• for WLAN
in 5 GHz frequency band 2
Electrical data
Standing wave ratio VSWR maximum 2
Beam angle of antenna
• in the 2.4 GHz frequency band
- horizontal
- vertical
• in the 5 GHz frequency band
- horizontal
- vertical
6
Permitted ambient conditions
Siemens IK PI · 2015
6/125
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Accessories
IWLAN antennas
■ Technical specifications (continued)
Article No.
6GK5795-4MC00-0AA3
6GK5795-4MD00-0AA3
6GK5795-4MA00-0AA3
Product-type designation
Antenna ANT795-4MC
Antenna ANT795-4MD
Antenna ANT795-4MA
Width
Height
Depth
Diameter
35 mm
160 mm
13 mm
-
35 mm
160 mm
13 mm
-
35 mm
160 mm
13 mm
-
Net weight
26 g
26 g
26 g
Mounting type
• mast mounting
• wall mounting
• roof mounting
Mounting type/ directly on the device
No
No
No
Yes
No
No
No
Yes
No
No
No
Yes
Product feature silicon-free
Yes
Yes
Yes
Material of outer shell
Polycarbonate
Polycarbonate
Polycarbonate
Standard for hazardous zone
-
-
-
Verification of suitability
• RoHS conformity
• Railway application
in accordance with EN 50124-1
• Railway application
in accordance with EN 50155
• fire protection
in accordance with EN 45545-2
• UL approval
- note
-
-
-
-
-
-
-
-
-
-
-
-
Wireless approval
Current national approvals can be
Current national approvals can be
Current national approvals can be
found on the Internet under
found on the Internet under
found on the Internet under
www.siemens.com/wireless-approvals www.siemens.com/wireless-approvals www.siemens.com/wireless-approvals
Article No.
6GK5792-6MN00-0AA6
6GK5793-6MN00-0AA6
6GK5795-6MN10-0AA6
6GK5795-6MT00-0AA0
Product-type designation
Antenna ANT792-6MN
Antenna ANT793-6MN
Antenna ANT795-6MN
Antenna ANT795-6MT
2.4 … 2.5 GHz
-
2.4 … 2.7 GHz
2.4 … 2.69 GHz
-
5.15 … 5.875 GHz
3.4 … 3.7 GHz
5.15 … 5.35 GHz
-
-
4.9 … 5.935 GHz
5.47 … 5.935 GHz
Impedance
50 
50 
50 
50 
Polarization
linear vertical
linear vertical
linear vertical
3 ports: linear vertical
Radiation characteristic
omnidirectional
omnidirectional
omnidirectional
omnidirectional
Antenna gain compared to spherical
radiator with linear radiation
-
-
-
-
Antenna gain compared to spherical
radiator with circular radiation
-
-
-
-
Antenna gain compared to spherical
radiator of the WLAN antenna in the
2.4 GHz frequency band
6 dB
-
6 dB
5 dB
Antenna gain compared to spherical
radiator of the WLAN antenna in the
5 GHz frequency band
-
5 dB
8 dB
7 dB
1.5
1.8
1.5
Design, dimensions and weight
Product properties, functions,
components general
Standards, specifications,
approvals
6
Wireless frequencies
Radio frequency
• for WLAN
in 2.4 GHz frequency band
• for WLAN
in 5 GHz frequency band 1
• for WLAN
in 5 GHz frequency band 2
Electrical data
Standing wave ratio VSWR maximum 1.8
6/126
Siemens IK PI · 2015
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Accessories
IWLAN antennas
■ Technical specifications (continued)
Article No.
6GK5792-6MN00-0AA6
6GK5793-6MN00-0AA6
6GK5795-6MN10-0AA6
6GK5795-6MT00-0AA0
Product-type designation
Antenna ANT792-6MN
Antenna ANT793-6MN
Antenna ANT795-6MN
Antenna ANT795-6MT
360°
30°
-
360°
-
360°
-
-
360°
25°
150°
-
360°
-
-
-
Note the antenna diagram
regarding horizontal beam
angle
-
Angle of inclination downward
maximum
0°
0°
0°
0°
Crosstalk attenuation between the
antenna connections
-
-
-
20 dB
Front-to-back ratio
-
-
-
-
Transmit power maximum
25 W
6W
75 W
10 W
Transmit power Note
-
at 25° ambient temperature
at 25° ambient temperature
at 25° ambient temperature
Range with clear line of sight
without disturbance
200 m
200 m
200 m
-
Range Note
Note: The range can be considerably less, depending on
spatial factors, the wireless
standard used, the data rate,
and the antennas at the other
end
Note: The range can be considerably less, depending on
spatial factors, the wireless
standard used, the data rate,
and the antennas at the other
end
Note: The range can be con- siderably less, depending on
spatial factors, the wireless
standard used, the data rate,
and the antennas at the other
end
Ambient temperature
• during operating
• during storage
• during transport
• during installation
-40 … +80 °C
-40 … +80 °C
-40 … +80 °C
-
-45 … +70 °C
-45 … +70 °C
-45 … +70 °C
-
-40 … +80 °C
-40 … +80 °C
-40 … +80 °C
-
-40 … +85 °C
-40 … +85 °C
-40 … +85 °C
-
Protection class IP
IP65
IP65
IP65
IP65
Wind load maximum
3N
3.9 N
10 N
-
Wind load Note
at 160 km/h
at 160 km/h
at 160 km/h
-
Width
Height
Depth
Diameter
50 mm
40 mm
370 mm
-
16 mm
160 mm
16 mm
-
86 mm
43 mm
86 mm
-
282 mm
32 mm
92 mm
-
Net weight
300 g
300 g
300 g
320 g
Mounting type
• mast mounting
• wall mounting
• roof mounting
Mounting type/ directly on the device
Yes
Yes
No
No
Yes
Yes
No
No
No
Yes
Yes
No
No
Yes
Yes
No
Product feature silicon-free
Yes
Yes
Yes
Yes
Material of outer shell
Glass fiber
Polypropylene
Polycarbonate
Polycarbonate
Beam angle of antenna
• in the 2.4 GHz frequency band
- horizontal
- vertical
• in the 5 GHz frequency band
- horizontal
- vertical
Opening angle Note
Number of electrical connections
of antenna
Design of electrical connection
of antenna
6
Permitted ambient conditions
Design, dimensions and weight
Product properties, functions,
components general
Siemens IK PI · 2015
6/127
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Accessories
IWLAN antennas
■ Technical specifications (continued)
Article No.
6GK5792-6MN00-0AA6
6GK5793-6MN00-0AA6
6GK5795-6MN10-0AA6
6GK5795-6MT00-0AA0
Product-type designation
Antenna ANT792-6MN
Antenna ANT793-6MN
Antenna ANT795-6MN
Antenna ANT795-6MT
Standard for hazardous zone
-
-
-
-
Verification of suitability
-
-
-
• RoHS conformity
• Railway application
in accordance with EN 50124-1
• Railway application
in accordance with EN 50155
• fire protection
in accordance with EN 45545-2
• UL approval
- note
Yes
-
Yes
-
Railway application
in accordance with
NF-F-16-101, NF-F-16-102
Yes
Yes
-
-
Yes
-
-
-
-
-
-
-
-
-
Wireless approval
Current national approvals
can be found on the Internet
under www.siemens.com/
wireless-approvals
Current national approvals
can be found on the Internet
under www.siemens.com/
wireless-approvals
Current national approvals
can be found on the Internet
under www.siemens.com/
wireless-approvals
Current national approvals
can be found on the Internet
under www.siemens.com/
wireless-approvals
Article No.
6GK5795-6DC00-0AA0
6GK5793-6DG00-0AA0
6GK5793-6DT00-0AA0
Product-type designation
Antenna ANT795-6DC
Antenna ANT793-6DG
Antenna ANT793-6DT
2.4 … 2.5 GHz
-
-
5.15 … 5.875 GHz
5.15 … 5.875 GHz
5.15 … 5.875 GHz
-
-
-
Impedance
50 
50 
50 
Polarization
linear vertical
dual linear +/- 45° slant
3 ports: vertical, +/- 45° slant
Radiation characteristic
directional
directional
directional
Antenna gain compared to spherical
radiator with linear radiation
-
-
-
Antenna gain compared to spherical
radiator with circular radiation
-
-
-
Antenna gain compared to spherical
radiator of the WLAN antenna in the
2.4 GHz frequency band
9 dB
-
-
Antenna gain compared to spherical
radiator of the WLAN antenna
in the 5 GHz frequency band
9 dB
9 dB
8 dB
Standing wave ratio VSWR maximum 2
2
1.7
Beam angle of antenna
• in the 2.4 GHz frequency band
Standards, specifications,
approvals
Yes
-
Wireless frequencies
6
Radio frequency
• for WLAN
in 2.4 GHz frequency band
• for WLAN
in 5 GHz frequency band 1
• for WLAN
in 5 GHz frequency band 2
Electrical data
75 … 55°
-
-
Beam angle of antenna in the 5 GHz
frequency band horizontal
55°
70°
65°
Beam angle of antenna in the 5 GHz
frequency band vertical
55°
60°
65°
Opening angle Note
-
-
-
Number of electrical connections
of antenna
1
2
3
Design of electrical connection
of antenna
N connector
N connector
QMA connector
Angle of inclination downward max.
0°
0°
0°
Crosstalk attenuation between the
antenna connections
25 dB
20 dB
17 dB
Front-to-back ratio
15 dB
20 dB
-
Transmit power maximum
10 W
10 W
2W
Transmit power Note
at 25° ambient temperature
at 25° ambient temperature
at 25° ambient temperature
Range with clear line of sight without
disturbance
-
-
-
Range Note
-
-
-
6/128
Siemens IK PI · 2015
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Accessories
IWLAN antennas
■ Technical specifications (continued)
Article No.
6GK5795-6DC00-0AA0
6GK5793-6DG00-0AA0
6GK5793-6DT00-0AA0
Product-type designation
Antenna ANT795-6DC
Antenna ANT793-6DG
Antenna ANT793-6DT
Ambient temperature
• during operating
• during storage
• during transport
• during installation
-40 … +80 °C
-40 … +80 °C
-40 … +80 °C
-
-40 … +80 °C
-40 … +80 °C
-40 … +80 °C
-
-40 … +85 °C
-40 … +85 °C
-40 … +85 °C
-
Protection class IP
IP67
IP67
IP67
Wind load maximum
15 N
15 N
15 N
Wind load Note
at 160 km/h
frontal at 160 km/h
frontal at 160 km/h
Width
Height
Depth
Diameter
80 mm
101 mm
35 mm
-
80 mm
101 mm
35 mm
-
80 mm
101 mm
35 mm
-
Net weight
110 g
110 g
270 g
Mounting type
• mast mounting
• wall mounting
• roof mounting
Mounting type/ directly on the device
Yes
Yes
No
No
Yes
Yes
No
No
Yes
Yes
No
No
Product feature silicon-free
-
-
-
Material of outer shell
Lexan EXL 9330
Lexan EXL 9330
Lexan EXL 9330
Standard for hazardous zone
-
-
-
Verification of suitability
• RoHS conformity
• Railway application
in accordance with EN 50124-1
• Railway application
in accordance with EN 50155
• fire protection
in accordance with EN 45545-2
• UL approval
- note
Yes
-
Yes
-
Yes
-
-
Yes
-
-
Yes
-
-
-
UL94-V0, UL746C F1
Wireless approval
Current national approvals can be
Current national approvals can be
Current national approvals can be
found on the Internet under
found on the Internet under
found on the Internet under
www.siemens.com/wireless-approvals www.siemens.com/wireless-approvals www.siemens.com/wireless-approvals
Permitted ambient conditions
Design, dimensions and weight
Product properties, functions,
components general
6
Standards, specifications,
approvals
Siemens IK PI · 2015
6/129
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Accessories
IWLAN antennas
■ Technical specifications (continued)
Article No.
6GK5792-8DN00-0AA6
6GK5793-8DJ00-0AA0
6GK5793-8DK00-0AA0
6GK5793-8DP00-0AA0
Product-type designation
Antenna ANT792-8DN
Antenna ANT793-6DJ
Antenna ANT793-6DK
Antenna ANT793-8DP
2.4 … 2.7 GHz
-
-
-
-
5.25 … 5.875 GHz
5.15 … 5.875 GHz
4.9 … 5.35 GHz
-
-
-
-
Impedance
50 
50 
50 
50 
Polarization
linear vertical
dual linear vertical-horizontal dual linear vertical-horizontal linear vertical
Radiation characteristic
directional
directional
directional
directional
Antenna gain compared to spherical
radiator with linear radiation
-
-
-
-
Antenna gain compared to spherical
radiator with circular radiation
-
-
-
-
Antenna gain compared to spherical
radiator of the WLAN antenna in the
2.4 GHz frequency band
14 dB
-
-
-
Antenna gain compared to spherical
radiator of the WLAN antenna in the
5 GHz frequency band
-
18 dB
23 dB
13.5 dB
1.7
1.7
1.5
35°
30°
-
-
-
-
17°
17°
9°
9°
40°
35°
Opening angle Note
-
-
-
-
Number of electrical connections of
antenna
1
2
2
1
Design of electrical connection of
antenna
N connector
N connector
N connector
N connector
Angle of inclination downward
maximum
0°
0°
0°
0°
Crosstalk attenuation between the
antenna connections
-
30 dB
40 dB
-
Front-to-back ratio
20 dB
30 dB
35 dB
20 dB
Transmit power
• maximum
• Note
75 W
at 25° ambient temperature
6W
at 25° ambient temperature
6W
at 25° ambient temperature
10 W
at 25° ambient temperature
Range with clear line of sight without
disturbance
1 000 m
-
-
-
Range Note
Note:
The range can be considerably less, depending on
spatial factors, the wireless
standard used, the data rate,
and the antennas at the other
end
-
-
Ambient temperature
• during operating
• during storage
• during transport
• during installation
-40 … +80 °C
-40 … +80 °C
-40 … +80 °C
-
-45 … +70 °C
-45 … +70 °C
-45 … +70 °C
-
-45 … +70 °C
-45 … +70 °C
-45 … +70 °C
-
-40 … +80 °C
-40 … +80 °C
-40 … +80 °C
-
Protection class IP
IP23
IP67
IP67
IP67
Wind load maximum
57 N
104 N
389 N
15 N
Wind load Note
at 160 km/h
frontal at 220 km/h
frontal at 220 km/h
frontal at 160 km/h
Wireless frequencies
Radio frequency
• for WLAN
in 2.4 GHz frequency band
• for WLAN
in 5 GHz frequency band 1
• for WLAN
in 5 GHz frequency band 2
Electrical data
Standing wave ratio VSWR maximum 1.5
6
Beam angle of antenna
• in the 2.4 GHz frequency band
- horizontal
- vertical
• in the 5 GHz frequency band
- horizontal
- vertical
Permitted ambient conditions
6/130
Siemens IK PI · 2015
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Accessories
IWLAN antennas
■ Technical specifications (continued)
Article No.
6GK5792-8DN00-0AA6
6GK5793-8DJ00-0AA0
6GK5793-8DK00-0AA0
6GK5793-8DP00-0AA0
Product-type designation
Antenna ANT792-8DN
Antenna ANT793-6DJ
Antenna ANT793-6DK
Antenna ANT793-8DP
Width
Height
Depth
Diameter
200 mm
200 mm
43 mm
-
190 mm
190 mm
30.5 mm
-
371 mm
371 mm
40 mm
-
80 mm
101 mm
35 mm
-
Net weight
500 g
700 g
2.5 kg
110 g
Mounting type
• mast mounting
• wall mounting
• roof mounting
Mounting type/ directly on the device
Yes
Yes
No
No
Yes
Yes
No
No
Yes
Yes
No
No
Yes
Yes
No
No
Product feature silicon-free
Yes
-
-
-
Material of outer shell
ASA
Polycarbonate / aluminum
Polycarbonate
Lexan EXL 9330
Standard for hazardous zone
-
-
-
-
Verification of suitability
• RoHS conformity
• Railway application
in accordance with EN 50124-1
• Railway application
• in accordance with EN 50155
• fire protection
• in accordance with EN 45545-2
• UL approval
- note
Yes
-
Yes
-
Yes
-
Yes
-
-
-
-
-
-
-
-
-
-
-
-
UL94-V0
Wireless approval
Current national approvals
can be found on the Internet
under www.siemens.com/
wireless-approvals
Current national approvals
can be found on the Internet
under www.siemens.com/
wireless-approvals
Current national approvals
can be found on the Internet
under www.siemens.com/
wireless-approvals
Current national approvals
can be found on the Internet
under www.siemens.com/
wireless-approvals
Article No.
6GK5792-4DN00-0AA6
6GK5793-4MN00-0AA6
Product-type designation
RCoax antenna ANT792-4DN
RCoax antenna ANT793-4MN
2.4 … 2.4835 GHz
-
-
5.15 … 5.85 GHz
-
-
Impedance
50 
50 
Polarization
circular, clockwise
vertical (lambda 5/8 characteristic)
Radiation characteristic
directional
omnidirectional
Antenna gain compared to spherical
radiator with linear radiation
-
-
Antenna gain compared to spherical
radiator with circular radiation
-
-
Antenna gain compared to spherical
radiator of the WLAN antenna
in the 2.4 GHz frequency band
4 dB
-
Antenna gain compared to spherical
radiator of the WLAN antenna
in the 5 GHz frequency band
-
6 dB
Design, dimensions and weight
Product properties, functions,
components general
Standards, specifications,
approvals
6
Wireless frequencies
Radio frequency
• for WLAN
in 2.4 GHz frequency band
• for WLAN
in 5 GHz frequency band 1
• for WLAN
• in 5 GHz frequency band 2
Electrical data
Standing wave ratio VSWR maximum 1.8
2
Siemens IK PI · 2015
6/131
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Accessories
IWLAN antennas
■ Technical specifications (continued)
Article No.
6GK5792-4DN00-0AA6
6GK5793-4MN00-0AA6
Product-type designation
RCoax antenna ANT792-4DN
RCoax antenna ANT793-4MN
90°
-
-
-
360°
40°
Opening angle Note
-
-
Number of electrical connections
of antenna
1
1
Design of electrical connection
of antenna
N connector
N connector
Angle of inclination downward
maximum
0°
0°
Crosstalk attenuation between the
antenna connections
-
-
Front-to-back ratio
2.5 dB
-
Transmit power maximum
1W
1W
Transmit power Note
-
-
Range with clear line of sight without
disturbance
-
-
Range Note
-
-
Ambient temperature
• during operating
• during storage
• during transport
• during installation
-40 … +70 °C
-40 … +70 °C
-40 … +70 °C
-
-40 … +70 °C
-40 … +70 °C
-40 … +70 °C
-
Protection class IP
IP65
IP65
Wind load maximum
-
-
Wind load Note
-
-
Width
Height
Depth
78.7 mm
-
78.7 mm
-
Diameter
30 mm
30 mm
Net weight
114 g
65 g
Product feature silicon-free
Yes
Yes
Material of outer shell
Polycarbonate
Polycarbonate
Standard for hazardous zone
-
-
Verification of suitability
• RoHS conformity
• Railway application
in accordance with EN 50124-1
• Railway application
in accordance with EN 50155
• fire protection
in accordance with EN 45545-2
• UL approval
- note
-
-
-
Yes
-
Yes
-
UL94-V1
Wireless approval
Current national approvals can be found on the Internet
under www.siemens.com/wireless-approvals
Current national approvals can be found on the Internet
under www.siemens.com/wireless-approvals
Beam angle of antenna
• in the 2.4 GHz frequency band
- horizontal
- vertical
• in the 5 GHz frequency band
- horizontal
- vertical
Permitted ambient conditions
6
Design, dimensions and weight
Product properties, functions,
components general
Standards, specifications,
approvals
6/132
Siemens IK PI · 2015
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Accessories
IWLAN antennas
■ Ordering data
Article No.
Article No.
Antennas with omnidirectional characteristics;
Directional antennas;
National approvals,
compact instructions on paper,
German/English
including mounting hardware
for wall or mast mounting
For mounting directly onto
SCALANCE W
Antenna gain incl. connector 3/5 dBi,
2.4/5 GHz;
• ANT795-4MC antenna;
IP65 (-20 to +65 °C),
straight connection,
N-Connect male,
scope of delivery: 1 antenna
• ANT795-4MD antenna;
IP65 (-20 to +65 °C),
connection with fixed 90° angle,
N-Connect male,
scope of delivery: 1 antenna
• ANT795-4MA antenna;
IP30 (-20 to +65 °C);
radial rotation possible
• with additional joint; R-SMA male
Scope of delivery: 1 antenna
Wall or mast mounting
• ANT792-6MN antenna
Antenna gain incl. N-Connect
connector 6 dBi, 2.4 GHz;
IP65 (-40 to +80°C),
with terminating resistor
1 x TI795-1R;
incl. mounting hardware
• ANT793-6MN antenna
Antenna gain incl. N-Connect
connector 5 dBi,
5 GHz; IP65 (-45 to +70 °C),
with terminating resistor
1 x TI795-1R;
• incl. mounting hardware
For mounting on a roof
• ANT795-6MN antenna
Antenna gain incl. N-Connect
connector 6/8 dBi, 2.4/5 GHz;
IP65 (-40 to +80 °C),
with terminating resistor
1 x TI795-1R
• ANT795-6MT antenna
MIMO antenna with 3 QMA sockets,
antenna gain 6 dBi, 2.4/5 GHz;
(-40 to +85 °C),
incl. mounting bracket
• Antenna mounting tool
(ANT795-6MN)
Mounting aid for installing ANT7956MN below a roof
6GK5795-4MC00-0AA3
6GK5795-4MD00-0AA3
6GK5 795-4MA00-0AA3
6GK5792-6MN00-0AA6
6GK5793-6MN00-0AA6
6GK5795-6MN10-0AA6
6GK5795-6MT00-0AA0
6GK5795-6MN01-0AA6
Sector antennas
• ANT795-6DC antenna
Antenna gain
incl. N-Connect connector 9/9 dBi,
2.4/5 GHz, -40 to +80 °C
• ANT793-6DG antenna
Dual-slant; antenna gain
• incl. two N-Connect connectors
9 dBi, 5 GHz, -40 to +80 °C
• ANT793-6DT antenna
MIMO antenna with 3 QMA sockets;
antenna gain 9 dBi, 5 GHz,
-40 to +85 °C
Strongly directional antennas
• ANT793-8DN antenna
Antenna gain 13.5 dBi
incl. N-Connect connector, 4.9 GHz,
-40 to +85 °C, preferably for use in
Japan
• ANT792-8DN antenna
Antenna gain incl. N-Connect
connector 14 dBi, 2.4 GHz;
-40 to +80 °C;
with terminating resistor
1 x TI795-1R
• ANT793-8DJ antenna
Vertically-horizontally polarized
antenna;
antenna gain incl. two N-Connect
connectors 18 dBi, 5 GHz;
-45 to +70 °C
• ANT793-8DK antenna
Vertically-horizontally polarized
antenna;
antenna gain incl. two N-Connect
connectors 23 dBi, 5 GHz;
-45 to +70 °C
6GK5795-6DC00-0AA0
6GK5793-6DG00-0AA0
6GK5793-6DT00-0AA0
6GK5793-8DP00-0AA0
6GK5792-8DN00-0AA6
6GK5793-8DJ00-0AA0
6
6GK5793-8DK00-0AA0
Antennas for RCoax systems
• ANT792-4DN antenna
Circularly polarized RCoax helix
antenna for RCoax systems;
N-Connect female connection;
antenna gain at 2.4 GHz 4 dBi
6GK5792-4DN00-0AA6
• ANT793-4MN antenna
Vertically polarized RCoax 5/8
antenna for RCoax systems;
N-Connect female connection;
antenna gain at 5.2 GHz/5.7 GHz
6/5 dBi
6GK5793-4MN00-0AA6
■ More information
Selection tools:
Cabling range:
To assist in the selection of industrial Ethernet components,
the TIA Selection Tool is available at:
http://www.siemens.com/tia-selection-tool
You can order components supplementary to the SIMATIC NET
cabling range from your local contact. Technical advice on this
subject is available from:
J. Hertlein
I IA SC CI PRM 4
Phone +49 (911) 750-4465
E-mail: juergen.hertlein@siemens.com
Siemens IK PI · 2015
6/133
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Accessories
IWLAN RCoax cables
■ Overview
■ Design
The RCoax cables were specially designed for the frequency
band around 2.4 GHz or 5 GHz respectively.
Cable jacket
Dielectric
6
■ Benefits
• Reliable coverage in areas problematic for radio
• Avoidance of greater than desired WLAN expansion by means
of defined emission of the radio waves
• Cost savings thanks to direct substitution of sliding contacts,
trailing cables, and data light barriers
• Highly flexible laying
6/134
Siemens IK PI · 2015
Wave propagation
Inner
conductor
Outer conductor
with opening
G_IK10_XX_30114
The RCoax cables are radiating cables that function as special
antennas for the SCALANCE W Access Points in environments
with complex radio coverage. Its design means that a defined,
cone-shaped radio field is generated along the RCoax cable.
The radiating cables are therefore perfectly suitable for use in all
types of applications with track-bound vehicles.
• Rugged coaxial cable which can be easily installed
• Two cables for use in the frequency bands 2.4 GHz and 5 GHz
• Connection as external antenna to SCALANCE W700 Access
Points
• Connection of mobile nodes via SCALANCE W700 Client
Modules using an antenna aligned to the RCoax
• Suitable for use in hazardous areas (Zone 2); no special
approvals necessary
Openings are present in the outer conductor of the coaxial cable
which permit the penetration and emission of radio waves. A
defined radio field is then developed around the RCoax cables.
Longitudinal damping and extraction loss are in a balanced
relationship, which permits a long segment length of RCoax
cable per SCALANCE W700 Access Point and an appropriate
distance from the mobile station (SCALANCE W700) to the
RCoax cable.
Coordinated accessories are available for assembly:
• IWLAN RCoax cable clip 1/2"
• IWLAN RCoax spacer 85 mm
• IWLAN RCoax threaded washer M6
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Accessories
IWLAN RCoax cables
■ Application
• Areas with demanding conditions for wireless coverage (e.g.
in tunnels, channels and elevator shafts) where "unlimited"
mobility is not of decisive importance, but where a mechanically wear-free and thus maintenance-free solution is required
to ensure reliable data transmission: this is made possible by
the defined radio field along the RCoax cable.
• The RCoax cables offer a wear-free and reliable wireless link,
particularly for conveyor systems and all types of rail-mounted
vehicle (suspended monorails, AGV systems).
Application examples
•
•
•
•
•
•
•
•
Suspended monorail
Automated guided vehicle systems (AGVS)
Cranes
Stacker cranes
Transfer lines
Tool-changing trolleys
Tunnels
Lifts
Antenna
ANT793-4MN
Antenna
ANT793-4MN
IWLAN RCoax
radiating cable
Antenna
ANT793-4MN
Storage retrieval
machine
SCALANCE
W721-1 RJ45
and ET 200SP
Storage retrieval
machine
SCALANCE
W721-1 RJ45
and ET 200SP
IWLAN RCoax
radiating cable
Control cabinet
Antenna
cable
Antenna
ANT793-4MN
Central control unit
SIMATIC ET 200S with
SCALANCE W761-1 RJ45
and SCALANCE XB005
Storage retrieval
machine
SCALANCE
W721-1 RJ45
and ET 200SP
6
IWLAN RCoax
radiating cable
Antenna
cable
Antenna
cable
Antenna
cable
SCALANCE
W761-1 RJ45
SCALANCE
W761-1 RJ45
SCALANCE
W761-1 RJ45
Industrial Ethernet/PROFINET
G_IK10_XX_30334
Storage retrieval
machine
SCALANCE
W721-1 RJ45
and ET 200SP
IWLAN RCoax
radiating cable
Storage and retrieval systems in high-bay warehouses automated with SCALANCE W721-1 RJ45, W761-1 RJ45 and RCoax
Siemens IK PI · 2015
6/135
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Accessories
IWLAN RCoax cables
■ Integration
IWLAN RCoax N-Connect
Female N-Connector
6GK5 798-0CN00-0AA0
IWLAN RCoax Cable
2,4 GHz = 6XV1 875-2A
5 GHz = 6XV1 875-2D
Access Point SCALANCE W788-1 M12
IWLAN RCoax N-Connect
Female N-Connector
6GK5 798-0CN00-0AA0
IWLAN RCoax N-Connect
Male Termination Impedance 50 Ohm
6GK5 795-1TN00-1AA0
Client Module SCALANCE W722-1 RJ45
IWLAN RCoax N-Connect
Male/Male Flexible Connection Cable
1 m = 6XV1875-5AH10
5 m = 6XV1875-5AH50
IWLAN
Termination impedance TI795-1N
6GK5795-1TN00-1AA0
IWLAN Antenna
ANT792-4DN / ANT793-4MN
2 GHz = 6GK5 792-4DN00-0AA6
5 GHz = 6GK5 793-4MN00-0AA6
IWLAN RCoax N-Connect/R-SMA
Male/Male Flexible Connection Cable
1 m = 6XV1875-5CH10
5 m = 6XV1875-5CH50
n†prXW††ZWZ[[
6
Connection example for an IWLAN RCoax system with connection to Industrial Ethernet
6/136
Siemens IK PI · 2015
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Accessories
IWLAN RCoax cables
■ Technical specifications
Article No.
6XV1875-2A
6XV1875-2D
Product-type designation
IWLAN RCoax Cable 2 GHz
IWLAN RCoax Cable 5 GHz
Suitability for installation
Suspended monorails, cranes, stacker cranes, or similar
Suspended monorails, cranes, stacker cranes, or similar
2.4 … 2.485 GHz
-
-
5.15 … 5.85 GHz
-
-
50 
50 
0.15 dB/m
-
0.17 dB/m
-
-
0.23 dB/m
-
0.24 dB/m
-
0.24 dB/m
-
0.27 dB/m
Damping ratio per length note
-
-
Coupling attenuation
• at 2.4 GHz at 20 °C
• at 5.15 GHz at 20 °C
• at 5.85 GHz at 20 °C
• note
35 dB
c(50) for distance of 10 cm between antenna and cable
42 dB
40 dB
c(50) for distance of 10 cm between antenna and cable
Capacitance per length
76 pF/m
76 pF/m
DC resistance per length
• of inner conductor at 20 °C
• of coaxial outer conductor at 20 °C
Relative speed
1.48 /km
2.8 /km
88 %
1.48 /km
2.8 /km
88 %
Outer diameter
• of the inner conductor
• of dielectric
• of the cable sheath
4.8 mm
12.4 mm
15.5 mm
4.8 mm
12.4 mm
15.5 mm
Thickness of the cable sheath
1.3 mm
1.3 mm
Halogen-free polyolefine AM3
Copper clad aluminum
Polyethylene foam
Overlapping copper foil with the slot groups bonded to
cable jacket
Halogen-free polyolefine AM3
Copper clad aluminum
Polyethylene foam
Overlapping copper foil with the slot groups bonded to
cable jacket
pastel turquoise
pastel turquoise
200 mm
200 mm
-
-
Number of bending cycles
• Note
1
-
1
-
Traction stress maximum
1 100 N
1 100 N
Weight per length
0.232 kg/m
0.232 kg/m
Mounting distance recommended
0.5 m
0.5 m
Wireless frequencies
Radio frequency
• for WLAN
in 2.4 GHz frequency band
• for WLAN
in 5 GHz frequency band 1
• for WLAN
in 5 GHz frequency band 2
Electrical data
Impedance
Damping ratio per length
• at 2.4 GHz
- with cable mounted 10 mm
above concrete at 20 °C
- with cable mounted 15 mm
above the aluminum rail at 20 °C
• at 5.15 GHz
- with cable mounted 10 mm
above concrete at 20 °C
- with cable mounted 15 mm
above the aluminum rail at 20 °C
• at 5.85 GHz
- with cable mounted 10 mm
above concrete at 20 °C
- with cable mounted 15 mm
above the aluminum rail at 20 °C
6
Mechanical data
Material
• of the cable sheath
• of inner conductor
• of dielectric
• of coaxial outer conductor
Color of the cable sheath
Bending radius
• with single bend minimum
permissible
• with multiple bends minimum
permissible
Siemens IK PI · 2015
6/137
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Accessories
IWLAN RCoax cables
■ Technical specifications (continued)
Article No.
6XV1875-2A
6XV1875-2D
Product-type designation
IWLAN RCoax Cable 2 GHz
IWLAN RCoax Cable 5 GHz
Ambient temperature
• during operating
• during storage
• during installation
-40 … +85 °C
-70 … +85 °C
-25 … +60 °C
-40 … +85 °C
-70 … +85 °C
-25 … +60 °C
Protection class IP
-
-
-
-
Yes
-
Yes
-
Current national approvals can be found on the Internet
under www.siemens.com/wireless-approvals
Current national approvals can be found on the Internet
under www.siemens.com/wireless-approvals
IEC 60754-2
IEC 60754-2
IEC 60332-1 and IEC 60332-3 Cat. C
IEC 60332-1 and IEC 60332-3 Cat. C
IEC 61034
IEC 61034
Permitted ambient conditions
Product properties, functions,
components general
Product feature silicon-free
Standards, specifications,
approvals
Verification of suitability
• RoHS conformity
• UL approval
- note
Wireless approval
Standard
• for behavior in fire:
corrosive gas emission
• for behavior in fire:
smoke emission
• for behavior in fire:
flame resistance
6
■ Ordering data
Article No.
IWLAN RCoax cables
Radiating cable for complex radio
environments as special antenna
for SCALANCE W Access Points;
for extended temperature range
(-40 °C to + 85 °C);
sold by the meter
minimum order quantity 20 m
• 2.4 GHz
• 5 GHz
RCoax N-Connect male/male
Coupler
IWLAN RCoax cable clip 1/2"
6XV1875-2A
6XV1875-2D
6GK1901-1PH00
Stripping tool for fast stripping of
RCoax cable on site
RCoax N-Connect female
N-connector
6GK5798-0CP00-1AA0
RF coupling for connecting an
RCoax antenna to an RCoax cable;
two N-Connect male connectors
Accessories
IWLAN RCoax N-Connect
stripping tool
Article No.
6GK5798-0CN00-0AA0
Plug connector for assembly
on site;
connection unit of RCoax cable for
connection of further components,
N-female connection.
Cable holder for RCoax cable
• 10 items
• 100 items
6GK5798-8MB00-0AC1
6GK5798-8MB00-0AM1
IWLAN RCoax
threaded washer M6
Threaded washer M6 for RCoax
cable clip 1/2", for assembly with
M6 threaded bolts
• 10 items
• 100 items
6GK5798-8MC00-0AC1
6GK5798-8MC00-0AM1
IWLAN RCoax spacer 85 mm
Spacer 85 mm for RCoax cable clip
1/2"
• 10 items
• 100 items
6GK5798-8MD00-0AC1
6GK5798-8MD00-0AM1
■ More information
Selection tools:
Wireless approvals:
To assist in selecting Industrial Ethernet components, the TIA
Selection Tool is available at:
http://www.siemens.com/tia-selection-tool
Current approvals can be found on the Internet at:
http://www.siemens.com/wireless-approvals
6/138
Siemens IK PI · 2015
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Accessories
IWLAN cabling technology
■ Overview
■ Application
RCoax/antenna connecting cables
• The flexible IWLAN RCoax/antenna connecting cables are
required for connecting RCoax segments or antennas with
active devices.
• The cables offer low attenuation so that the quality of the radio
signal is only reduced to a minimal extent.
• All antenna cables are flame-resistant, chemical-resistant and
silicone-free.
Terminating resistors
• Terminating resistors are required for wireless termination of
unused antenna connections at the access points and clients.
• RCoax segments must be terminated at the end with a terminating resistor.
A comprehensive, coordinated range of coaxial accessories is
offered for flexible combination and installation of the individual
IWLAN components indoors and outdoors.
This range encompasses connecting cables as well as diverse
connectors, lightning protection elements, a power splitter and
an attenuator.
■ Benefits
• Flexible use thanks to extensive, coordinated range
• Operation also outdoors with extended temperature range
and protection against water and dust thanks to degree of
protection IP65
• Components are suitable for use with SCALANCE W700
including national approvals
Lightning protection elements
• When separate antennas are used outdoors, there is a risk of
lightning strikes.
• A lightning protector can be used to prevent damage.
Cabinet feedthroughs
Together with the antenna connecting cables, the cabinet
feedthroughs enable simple connection of remote antennas to
the active components located in the control cabinet/box.
Attenuator
The 10 dB attenuator is always used when the transmitted power
has to be reduced both in the send and receive directions. Typical application areas include short RCoax segments or directional wireless links, which are to be limited in extent.
Power splitter
• With the help of the power splitter, the transmission power of
an access point is divided between two RCoax or antenna
segments.
• This enables wireless coverage in two areas using just one
access point.
Product versions
RCoax/antenna connecting cables
• Pre-assembled cable lengths (0.3 m to 10 m)
• Different connector types and combinations (N-Connect,
R-SMA, SMA, QMA)
Terminating resistors
• TI795-1R: Terminating resistor 50 ohms for R-SMA antenna
sockets
• TI795-1N: Terminating resistor 50 ohms for N-Connect
antenna sockets or RCoax segments
Lightning protection elements
• LP798-2N: Maintenance-free lightning protection element for
N-Connect connections
- Quarter-wave system (lambda-quarter) for the frequency
range 2 to 6 GHz
- Represents a short-circuit for DC voltages so that all types of
overvoltage can be reliably diverted
- Not suitable for DC infeed via the antenna cable
• LP798-1N: Lightning protection element for N-Connect
connections
- With gas discharge arrester for the frequency range 0 to
6 GHz for N-Connect connections
- Suitable for DC infeed via the antenna cable
Cabinet feedthroughs
• N-Connect female/SMA female with fastening flange for panel
thicknesses up to 5.5 mm
• N-Connect female/N-Connect female without flange for panel
thicknesses up to 4.5 mm
- Can also be used to connect two antenna connecting cables
Siemens IK PI · 2015
6/139
6
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Accessories
IWLAN cabling technology
■ Technical specifications
Article No.
6XV1875-5AH10
6XV1875-5AH20
6XV1875-5AH50
6XV1875-5AN10
Product-type designation
IWLAN RCoax/Antenna
Connection Cable
N-Connect Male/ Male
IWLAN RCoax/Antenna
Connection Cable
N-Connect Male/ Male
IWLAN RCoax/Antenna
Connection Cable
N-Connect Male/ Male
IWLAN RCoax/Antenna
Connection Cable
N-Connect Male/ Male
Acceptability for application
Flexible connecting cable for
connecting an antenna or
RCoax cable to an access
point/client
Flexible connecting cable for
connecting an antenna or
RCoax cable to an access
point/client
Flexible connecting cable for
connecting an antenna or
RCoax cable to an access
point/client
Flexible connecting cable for
connecting an antenna or
RCoax cable to an access
point/client
Cable length
1m
2m
5m
10 m
Number of electrical connections
2
2
2
2
Design of the electrical connection
N-Connect/N-Connect
male/male
N-Connect/N-Connect
male/male
N-Connect/N-Connect
male/male
N-Connect/N-Connect
male/male
Transmission frequency
0 … 6 GHz
0 … 6 GHz
0 … 6 GHz
0 … 6 GHz
Attenuation per length
• at 2.4 GHz typical
• at 5.2 GHz typical
• at 5.85 GHz typical
0.53 dB/m
0.83 dB/m
0.89 dB/m
0.53 dB/m
0.83 dB/m
0.89 dB/m
0.53 dB/m
0.83 dB/m
0.89 dB/m
0.53 dB/m
0.83 dB/m
0.89 dB/m
Return loss minimum
23 dB
23 dB
23 dB
23 dB
Impedance Nominal value
50 
50 
50 
50 
Capacity per length at 1 kHz
82 pF/m
82 pF/m
82 pF/m
82 pF/m
Relative speed
82 %
82 %
82 %
82 %
Braided shield made
of tin-plated copper wires
Braided shield made
of tin-plated copper wires
Braided shield made
of tin-plated copper wires
Braided shield made
of tin-plated copper wires
1.4 mm
3.8 mm
6.3 mm
1.4 mm
3.8 mm
6.3 mm
1.4 mm
3.8 mm
6.3 mm
1.4 mm
3.8 mm
6.3 mm
Symmetrical tolerance of outer
diameter of cable sheath
0.2 mm
0.2 mm
0.2 mm
0.2 mm
Thickness of the cable sheath
0.76 mm
0.76 mm
0.76 mm
0.76 mm
Material
• of inner conductor
• of dielectric
• of the cable sheath
Cu
polyethylene foam
FRNC
Cu
polyethylene foam
FRNC
Cu
polyethylene foam
FRNC
Cu
polyethylene foam
FRNC
Color of the cable sheath
Pastel turquoise
Pastel turquoise
Pastel turquoise
Pastel turquoise
32 mm
32 mm
32 mm
32 mm
45 mm
45 mm
45 mm
45 mm
Traction stress maximum
80 N
80 N
80 N
80 N
Weight per length
75 kg/km
75 kg/km
75 kg/km
75 kg/km
Ambient temperature
• during operating
• during storage
• during transport
• during installation
-40 … +80 °C
-40 … +80 °C
-40 … +80 °C
-25 … +80 °C
-40 … +80 °C
-40 … +80 °C
-40 … +80 °C
-25 … +80 °C
-40 … +80 °C
-40 … +80 °C
-40 … +80 °C
-25 … +80 °C
-40 … +80 °C
-40 … +80 °C
-40 … +80 °C
-25 … +80 °C
Protection class IP
IP68
IP68
IP68
IP68
Protection class IP note
when plugged in
when plugged in
when plugged in
when plugged in
Burning behaviour
UL 1685 (Vertical tray) and
UL 1581, Sec. 1090 (H)
UL 1685 (Vertical tray) and
UL 1581, Sec. 1090 (H)
UL 1685 (Vertical tray) and
UL 1581, Sec. 1090 (H)
UL 1685 (Vertical tray) and
UL 1581, Sec. 1090 (H)
Chemical resistance to mineral oil
Conditional resistance
Conditional resistance
Conditional resistance
Conditional resistance
Radiological resistance to
UV radiation
Resistant
Resistant
Resistant
Resistant
Electrical data
Mechanical data
Design of shield
6
Outer diameter
• of the inner conductor
• of dielectric
• of the cable sheath
Bending radius
• with single bend minimum
permissible
• with multiple bends minimum
permissible
Permitted ambient conditions
6/140
Siemens IK PI · 2015
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Accessories
IWLAN cabling technology
■ Technical specifications (continued)
Article No.
6XV1875-5AH10
6XV1875-5AH20
6XV1875-5AH50
6XV1875-5AN10
Product-type designation
IWLAN RCoax/Antenna
Connection Cable
N-Connect Male/ Male
IWLAN RCoax/Antenna
Connection Cable
N-Connect Male/ Male
IWLAN RCoax/Antenna
Connection Cable
N-Connect Male/ Male
IWLAN RCoax/Antenna
Connection Cable
N-Connect Male/ Male
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Verification of suitability
• UL-registration
• RoHS conformity
Yes
Yes
Yes
Yes
Article No.
6XV1875-5CE30
6XV1875-5CH10
6XV1875-5CH20
6XV1875-5CH50
6XV1875-5CN10
Product-type designation
IWLAN RCoax/
Antenna Connection
Cable N-Connect
RSMA Male/Male
IWLAN RCoax/
Antenna Connection
Cable N-Connect/
RSMA Male/ Male
IWLAN RCoax/
Antenna Connection
Cable N-Connect/
RSMA Male/ Male
IWLAN RCoax/
Antenna Connection
Cable N-Connect/
RSMA Male/ Male
IWLAN RCoax/
Antenna Connection
Cable N-Connect/
RSMA Male/ Male
Acceptability for application
Flexible connecting
cable for connecting
an antenna or RCoax
cable to an access
point/client
Flexible connecting
cable for connecting
an antenna or RCoax
cable to an access
point/client
Flexible connecting
cable for connecting
an antenna or RCoax
cable to an access
point/client
Flexible connecting
cable for connecting
an antenna or RCoax
cable to an access
point/client
Flexible connecting
cable for connecting
an antenna or RCoax
cable to an access
point/client
Cable length
0.3 m
1m
2m
5m
10 m
Number of electrical connections
2
2
2
2
2
Design of the electrical connection
N-Connect/RSMA
male/male
N-Connect/RSMA
male/male
N-Connect/RSMA
male/male
N-Connect/RSMA
male/male
N-Connect/RSMA
male/male
Transmission frequency
0 … 6 GHz
0 … 6 GHz
0 … 6GHz
0 … 6 GHz
0 … 6 GHz
Attenuation per length
• at 2.4 GHz typical
• at 5.2 GHz typical
• at 5.85 GHz typical
0.53 dB/m
0.83 dB/m
0.89 dB/m
0.53 dB/m
0.83 dB/m
0.89 dB/m
0.53 dB/m
0.83 dB/m
0.89 dB/m
0.53 dB/m
0.83 dB/m
0.89 dB/m
0.53 dB/m
0.83 dB/m
0.89 dB/m
Return loss minimum
23 dB
23 dB
23 dB
23 dB
23 dB
Impedance Nominal value
50 
50 
50 
50 
50 
Capacity per length at 1 kHz
82 pF/m
82 pF/m
82 pF/m
82 pF/m
82 pF/m
Relative speed
82 %
82 %
82 %
82 %
82 %
Braided shield made
of tin-plated copper
wires
Braided shield made
of tin-plated copper
wires
Braided shield made
of tin-plated copper
wires
Braided shield made
of tin-plated copper
wires
Braided shield made
of tin-plated copper
wires
1.4 mm
3.8 mm
6.3 mm
1.4 mm
3.8 mm
6.3 mm
1.4 mm
3.8 mm
6.3 mm
1.4 mm
3.8 mm
6.3 mm
1.4 mm
3.8 mm
6.3 mm
Symmetrical tolerance of outer
diameter of cable sheath
0.2 mm
0.2 mm
0.2 mm
0.2 mm
0.2 mm
Thickness of the cable sheath
0.76 mm
0.76 mm
0.76 mm
0.76 mm
0.76 mm
Material
• of inner conductor
• of dielectric
• of the cable sheath
Cu
polyethylene foam
FRNC
Cu
polyethylene foam
FRNC
Cu
polyethylene foam
FRNC
Cu
polyethylene foam
FRNC
Cu
polyethylene foam
FRNC
Color of the cable sheath
Pastel turquoise
Pastel turquoise
Pastel turquoise
Pastel turquoise
Pastel turquoise
Product properties, functions,
components general
Product feature
• halogen-free
• silicon-free
Standards, specifications,
approvals
Electrical data
Mechanical data
Design of shield
Outer diameter
• of the inner conductor
• of dielectric
• of the cable sheath
Siemens IK PI · 2015
6/141
6
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Accessories
IWLAN cabling technology
■ Technical specifications (continued)
Article No.
6XV1875-5CE30
6XV1875-5CH10
6XV1875-5CH20
6XV1875-5CH50
6XV1875-5CN10
Product-type designation
IWLAN RCoax/
Antenna Connection
Cable N-Connect
RSMA Male/Male
IWLAN RCoax/
Antenna Connection
Cable N-Connect/
RSMA Male/ Male
IWLAN RCoax/
Antenna Connection
Cable N-Connect/
RSMA Male/ Male
IWLAN RCoax/
Antenna Connection
Cable N-Connect/
RSMA Male/ Male
IWLAN RCoax/
Antenna Connection
Cable N-Connect/
RSMA Male/ Male
32 mm
32 mm
32 mm
32 mm
32 mm
45 mm
45 mm
45 mm
45 mm
45 mm
Traction stress maximum
80 N
80 N
80 N
80 N
80 N
Weight per length
75 kg/km
75 kg/km
75 kg/km
75 kg/km
75 kg/km
Ambient temperature
• during operating
• during storage
• during transport
• during installation
-40 … +80 °C
-40 … +80 °C
-40 … +80 °C
-25 … +80 °C
-40 … +80 °C
-40 … +80 °C
-40 … +80 °C
-25 … +80 °C
-40 … +80 °C
-40 … +80 °C
-40 … +80 °C
-25 … +80 °C
-40 … +80 °C
-40 … +80 °C
-40 … +80 °C
-25 … +80 °C
-40 … +80 °C
-40 … +80 °C
-40 … +80 °C
-25 … +80 °C
Protection class IP
IP68
IP68
IP68
IP68
IP68
Protection class IP note
when plugged in
when plugged in
when plugged in
when plugged in
when plugged in
Burning behaviour
UL 1685 (Vertical tray) UL 1685 (Vertical tray) UL 1685 (Vertical tray) UL 1685 (Vertical tray) UL 1685 (Vertical tray)
and UL 1581,
and UL 1581,
and UL 1581,
and UL 1581,
and UL 1581,
Sec. 1090 (H)
Sec. 1090 (H)
Sec. 1090 (H)
Sec. 1090 (H)
Sec. 1090 (H)
Chemical resistance to mineral oil
Conditional resistance Conditional resistance Conditional resistance Conditional resistance Conditional resistance
Radiological resistance to UV
radiation
Resistant
Resistant
Resistant
Resistant
Resistant
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Verification of suitability
• UL-registration
• RoHS conformity
Yes
Yes
Yes
Yes
Yes
Article No.
6XV1875-5DE30
6XV1875-5DH20
6XV1875-5JH10
Product-type designation
IWLAN RCoax/Antenna Connection
Cable RSMA/SMA Male/ Male
IWLAN RCoax/Antenna Connection
Cable RSMA/SMA Male/ Male
IWLAN Cable QMA / N-Connect
Male/Female
Acceptability for application
Flexible connecting cable for connect- Flexible connecting cable for connect- Adapter cable for connecting an
ing a cabinet bushing with SMA
ing a cabinet bushing with SMA
antenna with QMA connection to the
connection to an access point/client
connection to an access point/client
flexible connecting cables
Cable length
0.3 m
2m
1m
Number of electrical connections
2
2
2
Design of the electrical connection
RSMA/ SMA male/male
RSMA/ SMA male/male
QMA/N-Connect male/female
Transmission frequency
0 … 6 GHz
0 … 6 GHz
0 … 6 GHz
Attenuation per length
• at 2.4 GHz typical
• at 5.2 GHz typical
• at 5.85 GHz typical
0.53 dB/m
0.83 dB/m
0.89 dB/m
0.53 dB/m
0.83 dB/m
0.89 dB/m
0.53 dB/m
0.83 dB/m
0.89 dB/m
Return loss minimum
23 dB
23 dB
23 dB
Impedance Nominal value
50 
50 
50 
Capacity per length at 1 kHz
82 pF/m
82 pF/m
82 pF/m
Relative speed
82 %
82 %
82 %
Bending radius
• with single bend minimum
permissible
• with multiple bends minimum
permissible
Permitted ambient conditions
6
Product properties, functions,
components general
Product feature
• halogen-free
• silicon-free
Standards, specifications,
approvals
Electrical data
6/142
Siemens IK PI · 2015
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Accessories
IWLAN cabling technology
■ Technical specifications (continued)
Article No.
6XV1875-5DE30
6XV1875-5DH20
6XV1875-5JH10
Product-type designation
IWLAN RCoax/Antenna Connection
Cable RSMA/SMA Male/ Male
IWLAN RCoax/Antenna Connection
Cable RSMA/SMA Male/ Male
IWLAN Cable QMA / N-Connect
Male/Female
Braided shield made of tin-plated
copper wires
Braided shield made of tin-plated
copper wires
Braided shield made of tin-plated
copper wires
1.4 mm
3.8 mm
6.3 mm
1.4 mm
3.8 mm
6.3 mm
1.4 mm
3.8 mm
6.3 mm
Symmetrical tolerance of outer
diameter of cable sheath
0.2 mm
0.2 mm
0.2 mm
Thickness of the cable sheath
0.76 mm
0.76 mm
0.76 mm
Material
• of inner conductor
• of dielectric
• of the cable sheath
Cu
polyethylene foam
FRNC
Cu
polyethylene foam
FRNC
Cu
polyethylene foam
FRNC
Color of the cable sheath
Pastel turquoise
Pastel turquoise
Pastel turquoise
32 mm
32 mm
32 mm
45 mm
45 mm
45 mm
Traction stress maximum
80 N
80 N
80 N
Weight per length
75 kg/km
75 kg/km
75 kg/km
Ambient temperature
• during operating
• during storage
• during transport
• during installation
-40 … +80 °C
-40 … +80 °C
-40 … +80 °C
-25 … +80 °C
-40 … +80 °C
-40 … +80 °C
-40 … +80 °C
-25 … +80 °C
-40 … +80 °C
-40 … +80 °C
-40 … +80 °C
-25 … +80 °C
Protection class IP
IP68
IP68
IP67
Protection class IP note
when plugged in
when plugged in
when plugged in
Burning behaviour
UL 1685 (Vertical tray) and UL 1581,
Sec. 1090 (H)
UL 1685 (Vertical tray) and UL 1581,
Sec. 1090 (H)
UL 1685 (Vertical tray) and UL 1581,
Sec. 1090 (H)
Chemical resistance to mineral oil
Conditional resistance
Conditional resistance
Conditional resistance
Radiological resistance to UV
radiation
Resistant
Resistant
Resistant
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Mechanical data
Design of shield
Outer diameter
• of the inner conductor
• of dielectric
• of the cable sheath
Bending radius
• with single bend minimum
permissible
• with multiple bends minimum
permissible
Permitted ambient conditions
6
Product properties, functions,
components general
Product feature
• halogen-free
• silicon-free
Standards, specifications,
approvals
Verification of suitability
• UL-registration
• RoHS conformity
Siemens IK PI · 2015
6/143
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Accessories
IWLAN cabling technology
■ Technical specifications (continued)
Article No.
6GK5795-1TN00-1AA0
Product-type designation
IWLAN termination imped- IWLAN termination imped- IWLAN attenuator
ance TI795-1N N-Connect ance TI795-1R RSMA
N-Connect
Male
Male
Male/Female
6GK5795-1TR10-0AA6
6GK5798-0AP00-4CA0
6GK5798-0SN00-0EA0
IWLAN Power Splitter
N-Connect
Female
Type of supply voltage
-
-
-
-
Supply voltage for DC
-
-
-
-
Consumed current maximum
-
-
-
-
Active power loss maximum
-
-
-
-
Number of electrical connections
1
1
2
3
Design of the electrical connection
N-Connect male
R-SMA male
N-Connect male/
N-Connect female
N-Connect female
Transmission frequency
0 … 6 GHz
0 … 6 GHz
0 … 6 GHz
2 400 … 6 GHz
Impedance
50 
50 
50 
50 
Return loss minimum
25 dB
25 dB
-
24 dB
Insertion loss maximum
-
-
10 dB
3.05 dB
-40 … +70 °C
-40 … +70 °C
-40 … +70 °C
-40 … +70 °C
-40 … +70 °C
-40 … +70 °C
-40 … +70 °C
-40 … +70 °C
-40 … +70 °C
-25 … +110 °C
-25 … +110 °C
-25 … +110 °C
IP 65
IP 65
-
IP 67
Design
-
-
-
-
Width
Height
Depth
Diameter
Length
21 mm
34.5 mm
9 mm
15 mm
21 mm
45.7 mm
71.4 mm
34 mm
131.4 mm
Net weight
45 g
5g
64 g
937 g
Installation
-
-
-
-
Version of the swap medium
• C-PLUG
• KEY-PLUG
-
-
-
-
Supply voltage,
current consumption, power loss
Electrical data
Permitted ambient conditions
Ambient temperature
• during operating
• during storage
• during transport
6
Relative humidity at 25 °C without
condensation during operating
maximum
Protection class IP
Design, dimensions and weight
6/144
Siemens IK PI · 2015
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Accessories
IWLAN cabling technology
■ Technical specifications (continued)
Article No.
6GK5798-2LP00-2AA6
6GK5798-2LP10-2AA6
Product-type designation
Lightning Protector LP798-1N
Lightning Protector LP798-2N
50 
50 
Design of the plug-in connection
female / female
female / female
Ambient temperature
• during operating
• during storage
• during transport
-40 … +85 °C
-40 … +85 °C
-40 … +85 °C
-40 … +85 °C
-40 … +85 °C
-40 … +85 °C
Protection class IP
IP67
IP68
Width
Height
Depth
Diameter
54.8 mm
22.8 mm
89.6 mm
29 mm
Net weight
50 g
80 g
Article No.
6GK5798-0PT00-2AA0
6GK5798-2PP00-2AA6
6GK5798-0CP00-1AA0
Product-type designation
IWLAN panel feedthrough
N-Connect/SMA Female/
Female
IWLAN panel feedthrough
N-Connect/N-Connect
Female/Female
IWLAN coupler N-Connect- IWLAN angled adapter
Male/Male
RSMA/RSMA
male/female
Number of electrical connections
2
2
2
2
Design of the electrical connection
N-Connect female/
SMA female
N-Connect female/
N-Connect female
N-Connect male/
N-Connect male
R-SMA male /
R-SMA female
Transmission frequency
0 … 6 GHz
0 … 11 000 MHz
0 … 6 GHz
0 … 6 GHz
Electrical data
Impedance
Mechanical data
Design, dimensions and weight
6GK5798-1CS00-4AA0
Electrical data
Impedance
50 
50 
50 
50 
Return loss minimum
-
-
0.1 dB
-
Insertion loss maximum
-
-
-
-
-40 … +70 °C
-40 … +70 °C
-40 … +70 °C
-30 … +100 °C
-30 … +100 °C
-30 … +100 °C
-40 … +70 °C
-40 … +70 °C
-40 … +70 °C
-
6
Permitted ambient conditions
Ambient temperature
• during operating
• during storage
• during transport
-
Relative humidity at 25 °C without
condensation during operating
maximum
-
IP 68
-
-
Design
-
-
-
-
Width
Height
Depth
Diameter
Length
25.4 mm
25.4 mm
31.3 mm
20.7 mm
38 mm
20.8 mm
36.4 mm
17 mm
15 mm
-
Net weight
35 g
55 g
60 g
-
Installation
for wall thickness max.
5.5 mm
for wall thickness max.
4.5 mm
-
-
Protection class IP
Design, dimensions and weight
Siemens IK PI · 2015
6/145
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Accessories
IWLAN cabling technology
■ Ordering data
Article No.
IWLAN RCoax/antenna
N-Connect/R-SMA
Male/male flexible connection
cable
Flexible connecting cable for connecting an RCoax cable or antenna
to a SCALANCE W-700 access
point with R-SMA connections;
pre-assembled with two
connections, N-Connect male and
R-SMA male
• 0.3 m
•1m
•2m
•5m
• 10 m
IWLAN RCoax/antenna RSMA
male termination impedance
TI795-1R
6
6XV1875-5CE30
6XV1875-5CH10
6XV1875-5CH20
6XV1875-5CH50
6XV1875-5CN10
IWLAN RCoax/antenna
N-Connect male termination
impedance TI795-1N
Terminating resistor for RCoax
cable and open wireless interfaces
on SCALANCE W-700 devices with
N-Connect connections,
impedance 50 ohms,
N-male connection;
IP65 (-40 to +70 °C)
6/146
Siemens IK PI · 2015
6GK5798-2LP00-2AA6
Lightning protector
with N/N female/female connection,
IP67 (-40 to +85 °C),
frequency range: 0 to 6 GHz
6GK5798-2LP10-2AA6
Lightning protector
with N/N female/female connection,
IP68 (-40 to +85 °C),
Quarter Wave technology,
frequency range: 2 to 6 GHz
IWLAN RCoax/antenna
N-Connect female power splitter
6XV1875-5AH10
6XV1875-5AH20
6XV1875-5AH50
6XV1875-5AN10
6GK5798-0SN00-0EA0
2-way cable splitter,
Y-element for splitting the RCoax
cable or for using two antennas on
one wireless interface
IWLAN RCoax/antenna
N-Connect male/male coupler
6GK5798-0CP00-1AA0
HF coupling for connecting two
RCoax cables;
two N-Connect male connectors
IWLAN angled adapter RSMA/
RSMA male/female
6XV1875-5JH10
IWLAN RCoax/antenna
R-SMA/SMA male/male
Flexible connection cable
Flexible cable for connecting an
active device to components with
RSMA and SMA connections,
e.g. cabinet bushing;
pre-assembled with two R-SMA
male to SMA male connectors
• 0.3 m
•2m
Lightning protector LP798-1N
Lightning protector LP798-2N
IWLAN RCoax/antenna QMA/
N-Connect male/female
Flexible connection cable
Adapter cable for connecting a
MIMO antenna with QMA connections to the flexible connecting
cables;
assembled with two connections
QMA male and N-Connect female;
scope of delivery: 3 units
•1m
6GK5795-1TR10-0AA6
Terminating resistor for
open wireless interfaces on
SCALANCE W-700 devices with
RSMA connections,
impedance 50 ohms,
RSMA male connection;
IP65 (-40 to +70 °C);
3 units
IWLAN RCoax/antenna
N-Connect male/male
Flexible connection cable
Flexible connecting cable for connecting an RCoax cable or antenna
to a SCALANCE W-700 access
point with N-Connect connections;
pre-assembled with two N-Connect
male connections
•1m
•2m
•5m
• 10 m
Article No.
6GK5798-1CS00-4AA0
HF angled adapter 90 for
connecting antennas or antenna
connection cables to devices with
an RSMA connector
IWLAN RCoax/antenna
N-Connect male/female
attenuator
Attenuator with N-Connect male/
N-Connect female connectors
• 10 dB
6XV1875-5DE30
6XV1875-5DH20
6GK5795-1TN00-1AA0
IWLAN RCoax/antenna
N-Connect/SMA
female/female
panel bushing
6GK5798-0AP00-4CA0
6GK5798-0PT00-2AA0
Cabinet bushing with fastening
flange for wall thicknesses
up to 5.5 mm, SMA female and
N-Connect female connections
IWLAN RCoax/antenna
N-Connect/N-Connect
female/female
panel bushing
Cabinet bushing for wall
thicknesses up to 4.5 mm,
two N-Connect female connections
6GK5798-2PP00-2AA6
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Accessories
IWLAN cabling technology
■ More information
Selection tools:
Cabling range:
To assist in selecting Industrial Ethernet components, the
TIA Selection Tool is available at:
http://www.siemens.com/tia-selection-tool
You can order components supplementary to the SIMATIC NET
cabling range from your local contact. Technical advice on this
subject is available from:
J. Hertlein
I IA SC CI PRM 4
Phone +49 (911) 750-4465
E-mail: juergen.hertlein@siemens.com
6
Siemens IK PI · 2015
6/147
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Accessories
KEY-PLUG W700
■ Overview
■ Application
The KEY-PLUG stores the configuration data of a SCALANCE W
component. In addition, the iFeatures are enabled.
In addition to this, if there is a fault on a module, the module can
be replaced simply and quickly without needing to reconfigure
the replacement device and without specially trained personnel.
If a device needs to be replaced, the KEY-PLUG is simply removed from the failed component and plugged into the replacement device. The replacement device installed in the network
now starts up automatically with the same device configuration
as the failed device.
■ Design
The KEY-PLUG has degree of protection IP20. The degree of
protection of IP65 components is ensured by the design of the
target device. The KEY-PLUG is inserted in the PLUG compartment of the SCALANCE W component.
■ Mode of operation
• Swap medium with which iFeatures are enabled
• If a fault occurs, it allows fast and simple device replacement
of SCALANCE W components without a PG
• Can be used in all SCALANCE W700 IEEE 802.11n products
with a PLUG compartment
• For the automatic backup of configuration data
6
■ Benefits
• Fast and simple replacement of SCALANCE W components
without reconfiguration of the spare part.
• The device can be replaced without the need for specially
trained personnel or a programming device or PC.
• The downtimes of network segments and connected Industrial
Ethernet nodes can therefore be minimized if a fault occurs.
6/148
Siemens IK PI · 2015
During startup, the device automatically backs up the configuration data on a KEY-PLUG (as-supplied from the factory) plugged
into a SCALANCE W component. Changes to the configuration
during operation are also saved on the KEY-PLUG without any
additional operator intervention being necessary.
During startup, an unconfigured device automatically loads the
configuration data from an inserted KEY-PLUG that has been
written to provided the data was written by a compatible device
type.
Diagnostics
Incorrect use of the KEY-PLUG, such as inserting a KEY-PLUG
containing the configuration of a different device group or
general malfunctions of the KEY-PLUG are indicated by
diagnostics mechanisms of the host device (LEDs, SNMP,
Web based Management, etc.).
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Accessories
KEY-PLUG W700
■ Integration
Supported products
IWLAN client modules
• SCALANCE W740
• SCALANCE W730
IWLAN access points
• SCALANCE W780
• SCALANCE W780 EEC
• SCALANCE W770
• SCALANCE W770 EEC
Device type
iPCF
AP mode
iPCF
Client mode
iPCF-MC
AP mode
iPCF-MC
Client mode
SCALANCE W730
W740/W780
W740/W780
SCALANCE W740
W740/W780
W740/W780
SCALANCE W770
W780
W740/W780
SCALANCE W780
W780
W740/W780
1)
W780 1)
iREF
AP mode
W740/W780
W780
W740/W780
W780
only if a dual access point is used
Which KEY-PLUG do I use for which device?
• W780 = KEY-PLUG W780 iFeatures
• W740 = KEY-PLUG W740 iFeatures
■ Technical specifications
■ Ordering data
KEY-PLUG
KEY-PLUG W780 iFeatures
Power supply
via terminal device
Power loss
0.015 mW
Installation
Can be plugged into C-PLUG slot
Constructional design
• Dimensions (W x H x D) in mm
• Approx. weight
24.3 x 17 x 8.1
5g
Swap medium for enabling
additional iFeatures, for simple
device replacement if a fault
occurs, and for storing
configuration data.
Can be used in SCALANCE W
access points with a PLUG
compartment
Memory capacity
256 MB
KEY-PLUG W740 iFeatures
Degree of protection
IP20
Swap medium for enabling
additional iFeatures, for simple
device replacement if a fault
occurs, and for storing
configuration data.
Can be used in SCALANCE W
client modules with a PLUG
compartment
Article No.
6GK5907-8PA00
6
6GK5907-4PA00
Siemens IK PI · 2015
6/149
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Accessories
Power Supply PS791-2DC and PS791-2AC
■ Overview
■ Benefits
• The PS791-2DC and PS791-2AC power supply adapters are
designed specially for the SCALANCE W786 access points
and are integrated direct into these
• Global application due to wide input voltage range
• High reliability as power supply is short-circuit proof, secure
against no-load operation and is able to bridge short breaks
in the mains power
• When the power supply adapter and Power-over-Ethernet
(PoE) are used, redundant power supply of the access points
can be achieved
■ Design
PS791-2DC power supply adapter
• DC/DC power supply unit for input voltages from 12 to 24 V DC
and an output voltage of 18 V DC for all SCALANCE W786
devices
6
PS791-2AC power supply adapter
• AC/DC power supply unit for input voltages from
100 to 240 V AC and an output voltage of 18 V DC for all
SCALANCE W786 devices
•
•
•
•
6/150
Siemens IK PI · 2015
Integral power supply adapter for SCALANCE W786
Fan-free design
Operating temperatures from -40 °C to +60 °C
Resistant to condensation
© Siemens AG 2014
Industrial Wireless Communication
IWLAN – Accessories
Power Supply PS791-2DC and PS791-2AC
■ Technical specifications
Article No.
6GK5791-2DC00-0AA0
6GK5791-2AC00-0AA0
Product type designation
Power supply PS791-2DC
Power supply PS791-2AC
Interfaces
• Infeed: 4-pin screw terminal for DC Power
• Infeed: 3-pin screw terminal for AC Power
• Output voltage: 4-pin connector
• Output voltage: 4-pin connector
Input voltage
12 ... 24 V DC
(min. 9 V DC, max. 32 V DC) safety extra-low voltage
(SELV)
100 ... 240 V AC, 45 ... 65 Hz
Output voltage
18 V DC
18 V DC
Output power
14.4 W
14.4 W
Mains buffering
–
> 20 ms
Permissible ambient conditions
• Operating temperature
-40 °C ... +70 °C
-40 °C ... +60 °C
Approvals
EMC:
EN 61000-6-2:2005,
EN 61000-6-3:2007
EMC:
EN 61000-6-2:2005,
EN 61000-6-3:2007
Safety regulations
EN 60950, UL 60950-1
EN 60950, UL 60950-1
Protection class
VDE 0805, VDE 0100
VDE 0805, VDE 0100
Degree of protection
IP65
IP65
Dimensions (W x H x D) in mm
133 x 45 x 30 mm
133 x 45 x 30 mm
Assembly
Installation in SCALANCE W786 and
HiPath Wireless Outdoor Access Points
Installation in SCALANCE W786 and
HiPath Wireless Outdoor Access Points
Weight
223 g
209 g
■ Ordering data
Power supply PS791-2DC
6
Article No.
6GK5791-2DC00-0AA0
24 V DC power supply for
installation in SCALANCE W-786
products;
operating instructions
in German/English
Power supply PS791-2AC
6GK5791-2AC00-0AA0
110 V AC to 230 V AC power supply
for installation in the
SCALANCE W-786 products;
operating instructions
German/English
Siemens IK PI · 2015
6/151
© Siemens AG 2014
Industrial Wireless Communication
Wireless Devices
SIMATIC Mobile Panel 277(F) IWLAN
■ Overview
SIMATIC Mobile Panel 277(F) IWLAN
■ Function
6
• Input/output fields
for displaying and changing of process values.
• Function keys
are used for directly triggering functions and actions. Up to
16 functions can be configured simultaneously on function
keys. The function keys can also be used directly as
PROFINET IO. The function keys can also be reconfigured
as system keys. A frequently used function such as
"Acknowledge alarm" can thus be assigned to a function key.
• Auxiliary operator controls
such as handwheels, key switches and illuminated
pushbuttons can be assigned with a variable or as a direct
actuation via PROFINET IO (direct keys).
• Buttons
are used for direct triggering of functions and actions. Up to
16 functions can be configured simultaneously on buttons.
• Graphics
can be used as symbols instead of text for "labeling" function
keys or buttons. They can also be used as full-screen
background images.
In the configuration software, a comprehensive library is
available containing graphics and a wide variety of objects.
All editors with an OLE interface can be used as graphics
editors (such as PaintShop, Designer or CorelDraw).
• Vector graphics;
simple geometric basic forms (e.g. lines, circles and
rectangles) can be created directly in the configuration
software.
• Text fields
for labeling function keys, process displays, and process
values in any font size.
• Trend views and bars
are used for the graphic display of dynamic values.
• Display selection from the controller
permits operator prompting from the controller.
• Presentation of HTML documents with MS Pocket Internet
Explorer.
6/152
Siemens IK PI · 2015
• Visual Basic Script, flexibility thanks to the implementation of
new functions including linking to variables (comparison
operations, loops, etc.).
• Language switching
16 online languages, 32 configuration languages incl. Asiatic
and Cyrillic character sets
- Language-dependent texts and graphics
• User administration (security)
- User-oriented access protection according to requirements
of specific sectors
- Authentication with user name and password
- User-group-specific rights
• Signaling system
- Discrete and analog alarms (edge alarms) as well as the
ALARM_S message frame procedure for SIMATIC S7
- Freely definable message classes (e.g. status/fault
messages) for definition of acknowledgment response and
display of alarm events
• Message buffer
- Non-volatile, maintenance-free and battery-free message
buffer. The messages remain stored when the mobile panel
has the battery removed as well
• Recipe management
- With additional data storage
(on optional MultiMedia Card/SD Card)
- Online/offline processing on the panel
- Storage of recipe data in standard Windows format (CSV)
- External processing using standard tools such as Excel and
Access is possible
• Help texts
for process images, messages and variables.
• Arithmetic functions
• Limit value monitoring
for reliable process control of inputs and outputs.
• Indicator light
for machine and plant status indication.
• Scheduler
for cyclic function processing.
• Dynamic positioning of objects and dynamic showing/hiding
of objects
• Permanent window and template concept
- Creation of screen templates
• Simple maintenance and configuration thanks to:
- Backup and restore of the project, operating system,
recipe data records and firmware on the optional standard
Multimedia Card/SD Card
- Backup and restoration of configuration, operating system,
recipe data sets and firmware on a PC using ProSave
- Project transfer/return transfer via PROFINET/WLAN
- Automatic transfer detection
- Individual brightness setting
- Project simulation directly on the configuration computer
• WinCC flexible options
- Sm@rtService for remote operator control and monitoring of
SIMATIC HMI systems based on TCP/IP networks
- Sm@rtAccess for communication between HMI systems
based on TCP/IP networks. Remote access to recipe data
records, passwords and HMI system-specific information,
and much more. (Mobile Panel 277F IWLAN as server: View
only)
- OPC server: Communication with applications (e.g. MES,
ERP, or applications in the office sector) from various
manufacturers (see HMI software/runtime software
SIMATIC WinCC flexible/WinCC flexible RT options)
- Audit
© Siemens AG 2014
Industrial Wireless Communication
Wireless Devices
SIMATIC Mobile Panel 277(F) IWLAN
■ Function (continued)
Configuration
Configuration is carried out with the SIMATIC WinCC flexible
Standard or Advanced configuration software (see
SIMATIC WinCC flexible HMI software/engineering software).
SIMATIC WinCC flexible is the logical further development of the
field-proven ProTool family. Projects generated using ProTool
can be easily migrated to WinCC flexible. If WinCC flexible is
started directly from SIMATIC Manager, data in STEP 7 can be
accessed directly when the panel is configured. Duplicated data
input and data management is, therefore, avoided.
IWLAN infrastructure
The required IWLAN infrastructure is set up using the
SCALANCE W-700 IWLAN Access Points, preferably with the
SCALANCE W-700 variant that has two wireless cards built into
the device (Dual Access Point) and KEY-PLUG W700 iFeatures
which supports the application options of the Mobile Panel
277(F) IWLAN.
The iPCF-MC functionality (rapid roaming = fast, uninterrupted
switchover between multiple access points) is only available
with panels in version V2 or higher.
The Access Point provides an Industrial Ethernet interface for
connection to the wired network.
In addition to a reliable radio link, the SCALANCE W-700 Access
Points stand out due to their optimum support of standardized
IT mechanisms:
• IEEE 802.11b/ g/ a/ h for different frequency ranges
• IEEE 802.11e for multimedia, wireless multimedia (WMM) 1)
• IEEE 802.11i for security 1)
• Construction of redundant networks with the Rapid Spanning
Tree Protocol (RSTP)
• Virtual networks (VLAN) to logically separate, for example,
different user groups
• Sending the log entries of the SCALANCE W devices to a
Syslog server
Onlythe wireless approvals printed on the Mobile Panel are
binding. The RF approvals planned for all SIMATIC products can
be viewed at http://www.siemens.com/wireless-approvals.
■ Integration
The SIMATIC Mobile Panel 277(F) IWLAN communicates via
the WLAN Standard IEEE 802.11 a(b/g) via PROFINET. The
Mobile Panel 277F IWLAN devices also support PROFIsafe
communication.
There are five device variants with V2:
For mobile operation and monitoring via WLAN:
• Mobile Panel 277 IWLAN V2
• Mobile Panel 277 IWLAN V2 with handwheel, key switch and
illuminated pushbuttons
As fail-safe device for safety-oriented operation as well:
• Mobile Panel 277F IWLAN V2 with acknowledgement button
and emergency stop button
• Mobile Panel 277F IWLAN V2 with acknowledgement button,
emergency stop button, handwheel, key switch and illuminated pushbuttons
• Mobile Panel 277F IWLAN RFID Tag (for V2 only)
For the versions Mobile Panel 277F IWLAN (PROFIsafe), the
following system prerequisites apply:
• The Mobile Panel must be connected as a safe device
(PROFIsafe, Distributed Safety)
• Use of a SIMATIC F-CPU
SIMATIC Mobile Panel
277 IWLAN
When using
transponders
When using
Profinet IO
277F IWLAN
(fail-safe)
Not supported by Mobile Panel Wireless
–
277F IWLAN
(RFID Tag)
(fail-safe)

SIMATIC F-CPU
(Distributed
Safety)
!
–

–
–
–
!
!
!

6
–
 = Recommended
!
1)
Only WLAN
utilization (HMI)
5 GHz
frequency band
(IEEE 802.11a)
= Requirement
– = Not required
The Mobile Panel 277(F) IWLAN can be connected to:
• SIMATIC S7-200/300/400 (one F-CPU required for integrating
the Mobile Panel 277F IWLAN and SIMOTION (Mobile Panel
277 IWLAN V2 or higher, or Mobile Panel 277F IWLAN V2 or
higher (WinCC flexible 2008 SP3 or higher))
Note:
Further information can be found under "System interfaces".
The Function Manuals "Fail-Safe Operation of the
Mobile Panel 277F IWLAN" are available for downloading
in English, German, and Japanese.
http://support.automation.siemens.com/WW/view/en/31255853
Siemens IK PI · 2015
6/153
© Siemens AG 2014
Industrial Wireless Communication
Wireless Devices
SIMATIC Mobile Panel 277(F) IWLAN
■ Technical specifications
6AV6645-0DD01-0AX1 6AV6645-0DE01-0AX1 6AV6645-0EB01-0AX1 6AV6645-0EC01-0AX1 6AV6645-0EF01-0AX1
With integrated
enabling- and
emergency-stop
button
With integrated
enabling- and
emergency-stop
button, handwheel,
key switch and two illuminated pushbuttons
RFID with integrated
enabling- and
emergency-stop
button, handwheel,
key switch and two illuminated pushbuttons
Display
Size
7.5"
7.5"
7.5"
7.5"
7.5"
Display type
TFT, 65536 colors
TFT, 65536 colors
TFT, 65536 colors
TFT, 65536 colors
TFT, 65536 colors
Resolution (pixels)
• Resolution (WxH in pixel)
640 x 480
640 x 480
640 x 480
640 x 480
640 x 480
Backlighting
• MTBF backlighting (at 25 °C)
50 000 h
50 000 h
50 000 h
50 000 h
50 000 h
Control elements
Operating options
Keys and Touch
Keys and Touch
Keys and Touch
Keys and Touch
Keys and Touch
Function keys, programmable
18 function keys,
18 with LEDs
18 function keys,
18 with LEDs
18 function keys,
18 with LEDs
18 function keys, 18
with LEDs
18 function keys,
18 with LEDs
Connection for
mouse/keyboard/barcode reader
USB / USB / USB
USB / USB / USB
USB / USB / USB
USB / USB / USB
USB / USB / USB
Analog, resistive
Analog, resistive
Analog, resistive
Analog, resistive
Analog, resistive
No
No
Yes
Yes
Yes
Touch operation
• Touch screen
6
With handwheel key
switch and two illuminated pushbutton
Special operator controls
• Stop button
• Emergency stop button
(forced blocking)
• Acknowledgement button
• Key-operated switch
• Illuminated pushbutton
• Handwheel
No
No
No
No
No
Yes
Yes
Yes
Yes
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Supply voltage
Supply voltage
DC
DC
DC
DC
DC
Via charging station
Yes
Yes
Yes
Yes
Yes
Via table power supply
Yes
Yes
Yes
Yes
Yes
Processor
Processor
ARM, 520 MHz
ARM, 520 MHz
ARM, 520 MHz
ARM, 520 MHz
ARM, 520 MHz
Memory
Type
Flash / RAM
Flash / RAM
Flash / RAM
Flash / RAM
Flash / RAM
6 MB usable memory
for user data
6 MB usable memory
for user data
6 MB usable memory
for user data
6 MB usable memory
for user data
6 MB usable memory
for user data
7.2 V
5 100 mA·h
500
4h
4h
Yes
Yes
Yes
7.2 V
5 100 mA·h
500
4h
4h
Yes
Yes
Yes
7.2 V
5 100 mA·h
500
4h
4h
Yes
Yes
Yes
7.2 V
5 100 mA·h
500
4h
4h
Yes
Yes
Yes
7.2 V
5 100 mA·h
500
4h
4h
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Usable memory for user data
Battery
Main battery
• Rated voltage
• Capacity
• Number of loading cycles, min
• Charging time, typ.
• Operating time, typ.
• Display for battery capacity
• Energy-saving mode
• Battery replacement during
operation
Type of output
Status LEDs
LED for safe
LED for communication
Yes
Yes
Yes
Yes
Yes
LED for battery
Yes
Yes
Yes
Yes
Yes
Vibrations
Yes
Yes
Yes
Yes
Yes
Hardware clock,
battery backup,
synchronizable
Yes
Yes
Yes
Hardware clock,
battery backup,
synchronizable
Yes
Yes
Yes
Hardware clock,
battery backup,
synchronizable
Yes
Yes
Yes
Hardware clock,
battery backup,
synchronizable
Yes
Yes
Yes
Hardware clock,
battery backup,
synchronizable
Yes
Yes
Yes
Time of day
Clock
• Type
• Hardware clock (real-time clock)
• Battery-backed
• Synchronizable
6/154
Siemens IK PI · 2015
© Siemens AG 2014
Industrial Wireless Communication
Wireless Devices
SIMATIC Mobile Panel 277(F) IWLAN
■ Technical specifications (continued)
6AV6645-0DD01-0AX1 6AV6645-0DE01-0AX1 6AV6645-0EB01-0AX1 6AV6645-0EC01-0AX1 6AV6645-0EF01-0AX1
With handwheel key
switch and two illuminated pushbutton
With integrated
enabling- and
emergency-stop
button
With integrated
enabling- and
emergency-stop
button, handwheel,
key switch and two illuminated pushbuttons
RFID with integrated
enabling- and
emergency-stop
button, handwheel,
key switch and two illuminated pushbuttons
Interfaces
Interfaces
1 x Ethernet (RJ45)
1 x Ethernet (RJ45)
1 x Ethernet (RJ45)
1 x Ethernet (RJ45)
1 x Ethernet (RJ45)
Number of USB interfaces
1
1
1
1
1
USB port
1 x USB
1 x USB
1 x USB
1 x USB
1 x USB
Multi Media Card slot
1 MMC/SD card slot
1 MMC/SD card slot
1 MMC/SD card slot
1 MMC/SD card slot
1 MMC/SD card slot
Industrial Ethernet
• Industrial Ethernet interface
1 x Ethernet (RJ45)
1 x Ethernet (RJ45)
1 x Ethernet (RJ45)
1 x Ethernet (RJ45)
1 x Ethernet (RJ45)
WLAN
• Wireless LAN
• Supports rapid roaming
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Protocols
PROFINET
Yes
Yes
Yes
Yes
Yes
Supports protocol for PROFINET IO
Yes
Yes
Yes
Yes
Yes
Supports protocol for PROFIsafe
No
No
Yes
Yes
Yes
Yes;
The product is
designed for use in
industrial environments. When used in
residential areas, the
emission of radio interference according to
limit class B of
EN 55011 must be
ensured. For further
information refer to the
user documentation
Yes;
The product is
designed for use in
industrial environments. When used in
residential areas, the
emission of radio interference according to
limit class B of
EN 55011 must be
ensured. For further
information refer to the
user documentation
Yes;
The product is
designed for use in
industrial environments. When used in
residential areas, the
emission of radio interference according to
limit class B of
EN 55011 must be
ensured. For further
information refer to the
user documentation
Yes;
The product is
designed for use in
industrial environments. When used in
residential areas, the
emission of radio interference according to
limit class B of
EN 55011 must be
ensured. For further
information refer to the
user documentation
Yes;
The product is
designed for use in
industrial environments. When used in
residential areas, the
emission of radio interference according to
limit class B of
EN 55011 must be
ensured. For further
information refer to the
user documentation
Degree and class of protection
IP65 enclosure
Yes
Yes
Yes
Yes
Yes
Standards, approvals, certificates
Certifications
CE, cULus, C-TICK
CE, cULus, C-TICK
CE, cULus, C-TICK
CE, cULus, C-TICK
CE, cULus, C-TICK
CE mark
Yes
Yes
Yes
Yes
Yes
cULus
Yes
Yes
Yes
Yes
Yes
RCM (former C-TICK)
Yes
Yes
Yes
Yes
Yes
TÜV safety certification
Yes
Yes
Yes
Highest safety class achievable in
safety mode
• Performance level
according to EN ISO 13849-1:2008
• SIL according to IEC 61508:2010
e
e
e
SIL 3
SIL 3
SIL 3
EMC
Emission of radio interference
acc. to EN 55 011
• Emission of radio interferences
acc. to EN 55 011 (limit class A)
Ambient conditions
Drop height
1.2 m
1.2 m
1.2 m
1.2 m
1.2 m
Operating temperature
• Operation
0 °C to +40 °C
0 °C to +40 °C
0 °C to +40 °C
0 °C to +40 °C
0 °C to +40 °C
Storage/transport temperature
• Transport, storage
-20 °C to +60 °C
-20 °C to +60 °C
-20 °C to +60 °C
-20 °C to +60 °C
-20 °C to +60 °C
Relative humidity
• max. relative humidity
80 %
80 %
80 %
80 %
80 %
Operating systems
Operating system
Windows CE
Windows CE
Windows CE
Windows CE
Windows CE
16
16
16
16
16
Languages
Online languages
• Number of online/runtime
languages
Siemens IK PI · 2015
6/155
6
© Siemens AG 2014
Industrial Wireless Communication
Wireless Devices
SIMATIC Mobile Panel 277(F) IWLAN
■ Technical specifications (continued)
6AV6645-0DD01-0AX1 6AV6645-0DE01-0AX1 6AV6645-0EB01-0AX1 6AV6645-0EC01-0AX1 6AV6645-0EF01-0AX1
With integrated
enabling- and
emergency-stop
button
With integrated
enabling- and
emergency-stop
button, handwheel,
key switch and two illuminated pushbuttons
RFID with integrated
enabling- and
emergency-stop
button, handwheel,
key switch and two illuminated pushbuttons
Functionality under WinCC
(TIA Portal)
Libraries
Yes
Yes
Yes
Yes
Yes
Task planner
Yes
Yes
Yes
Yes
Yes
Message system
• Number of messages
• Bit messages
• Analog messages
4 000
Yes
Yes
4 000
Yes
Yes
4 000
Yes
Yes
4 000
Yes
Yes
4 000
Yes
Yes
300
500
1 000
64 KB integrated
Flash, expandable
300
500
1 000
64 KB integrated
Flash, expandable
300
500
1 000
64 KB integrated
Flash, expandable
300
500
1 000
64 KB integrated
Flash, expandable
300
500
1 000
64 KB integrated
Flash, expandable
Variables
• Number of variables per device
• Limit values
• Multiplexing
2 048
Yes
Yes
2 048
Yes
Yes
2 048
Yes
Yes
2 048
Yes
Yes
2 048
Yes
Yes
Images
• Number of configurable images
500
500
500
500
500
10 000 text elements
Bit maps, icons,
vector graphics
10 000 text elements
Bit maps, icons,
vector graphics
10 000 text elements
Bit maps, icons,
vector graphics
10 000 text elements
Bit maps, icons,
vector graphics
10 000 text elements
Bit maps, icons,
vector graphics
With SIMATIC S7
Diagrams, bar graphs,
sliders, analog display, invisible buttons
With SIMATIC S7
Diagrams, bar graphs,
sliders, analog display, invisible buttons
With SIMATIC S7
Diagrams, bar graphs,
sliders, analog display, invisible buttons
With SIMATIC S7
Diagrams, bar graphs,
sliders, analog display, invisible buttons
With SIMATIC S7
Diagrams, bar graphs,
sliders, analog display, invisible buttons
500
400
500
400
500
400
500
400
500
400
20
20
20
20
20
20
20
20
20
20
10 000
10 000
10 000
10 000
10 000
50
32
Yes
50
32
Yes
50
32
Yes
50
32
Yes
50
32
Yes
Alarms, report
(shift report),
PROFINET
Alarms, report
(shift report),
PROFINET
Alarms, report
(shift report),
PROFINET
Alarms, report
(shift report),
PROFINET
Alarms, report
(shift report),
PROFINET
USB, Ethernet,
automatic transfer
recognition
Yes
USB, Ethernet,
automatic transfer
recognition
Yes
USB, Ethernet,
automatic transfer
recognition
Yes
USB, Ethernet,
automatic transfer
recognition
Yes
USB, Ethernet,
automatic transfer
recognition
Yes
Recipe administration
• Number of recipes
• Data records per recipe
• Entries per data record
• Recipe memory
6
With handwheel key
switch and two illuminated pushbutton
Image objects
• Text objects
• Graphics object
Complex image objects
• Status/control
• dynamic objects
Lists
• Number of text lists per project
• Number of graphics lists
per project
Archiving
• Number of archives per device
• Number of measuring points
per project
• Number of entries per archive
Security
• Number of user groups
• Number of user rights
• Password export/import
Logging through printer
• Recording/Printing
Transfer (upload/download)
• Transfer of configuration
• Wireless LAN
6/156
Siemens IK PI · 2015
© Siemens AG 2014
Industrial Wireless Communication
Wireless Devices
SIMATIC Mobile Panel 277(F) IWLAN
■ Technical specifications (continued)
6AV6645-0DD01-0AX1 6AV6645-0DE01-0AX1 6AV6645-0EB01-0AX1 6AV6645-0EC01-0AX1 6AV6645-0EF01-0AX1
Process coupling
• Connection to controller
• S7-1200
• S7-1500
• Zones
- Number of zones per project,
max.
- Number of transponders
for zones per project, max.
• Effective range
- Number of effective ranges
per project, max.
- Number of transponders
for effective ranges per project,
max.
• Transponder
- Number of transponders
per project, max.
- Adjustable distance range
- Adjustable distance, min.
- Adjustable distance, max.
With handwheel key
switch and two illuminated pushbutton
With integrated
enabling- and
emergency-stop
button
With integrated
enabling- and
emergency-stop
button, handwheel,
key switch and two illuminated pushbuttons
RFID with integrated
enabling- and
emergency-stop
button, handwheel,
key switch and two illuminated pushbuttons
S7-200, S7- 300/400
see section on
"System interfaces"
Yes
Yes
Yes
254
S7-200, S7- 300/400
see section on
"System interfaces"
Yes
Yes
Yes
254
S7-200, S7- 300/400
see section on
"System interfaces"
No
No; Available soon
Yes
254
S7-200, S7- 300/400
see section on
"System interfaces"
No
No; Available soon
Yes
254
S7-200, S7- 300/400
see section on
"System interfaces"
No
No; Available soon
255
255
255
255
Yes
127
Yes
127
127
127
Yes
127
Yes
256
Yes
256
Yes
256
Yes
256
Yes
2m
8m
Yes
2m
8m
Yes
2m
8m
Yes
2m
8m
I/O/Options
I/O devices
• Multi Media Card
Barcode reader
Yes
Barcode reader
Yes
Barcode reader
Yes
Barcode reader
Yes
Barcode reader
Yes
Mechanics/material
Type of housing (front)
Plastic
Plastic
Plastic
Plastic
Plastic
Dia 290 mm /
D 103 mm
Dia 290 mm /
D 103 mm
Dia 290 mm /
D 103 mm
Dia 290 mm /
D 103 mm
Dia 290 mm /
D 103 mm
2.2 kg
2.2 kg
2.2 kg
2.2 kg
2.2 kg
Dimensions
Housing diameter/depth (mm)
Weights
Weight (without packaging)
6AV6645-0FD01-0AX1 6AV6645-0FE01-0AX1 6AV6645-0GB01-0AX1 6AV6645-0GC01-0AX1 6AV6645-0GF01-0AX1
USA version
USA version
With handwheel key
switch and two illuminated pushbutton
USA version
With integrated
enabling- and
emergency-stop
button
USA version
With integrated
enabling- and
emergency-stop
button, handwheel,
key switch and two illuminated pushbuttons
USA version
RFID with integrated
enabling- and
emergency-stop
button, handwheel,
key switch and two illuminated pushbuttons
Display
Size
7.5"
7.5"
7.5"
7.5"
7.5"
Display type
TFT, 65536 colors
TFT, 65536 colors
TFT, 65536 colors
TFT, 65536 colors
TFT, 65536 colors
Resolution (pixels)
• Resolution (WxH in pixel)
640 x 480
640 x 480
640 x 480
640 x 480
640 x 480
Backlighting
• MTBF backlighting (at 25 °C)
50 000 h
50 000 h
50 000 h
50 000 h
50 000 h
Control elements
Operating options
Keys and Touch
Keys and Touch
Keys and Touch
Keys and Touch
Keys and Touch
Function keys, programmable
18 function keys,
18 with LEDs
18 function keys,
18 with LEDs
18 function keys,
18 with LEDs
18 function keys,
18 with LEDs
18 function keys,
18 with LEDs
Connection for
mouse/keyboard/barcode reader
USB / USB / USB
USB / USB / USB
USB / USB / USB
USB / USB / USB
USB / USB / USB
Analog, resistive
Analog, resistive
Analog, resistive
Analog, resistive
Analog, resistive
Touch operation
• Touch screen
Siemens IK PI · 2015
6/157
6
© Siemens AG 2014
Industrial Wireless Communication
Wireless Devices
SIMATIC Mobile Panel 277(F) IWLAN
■ Technical specifications (continued)
6AV6645-0FD01-0AX1 6AV6645-0FE01-0AX1 6AV6645-0GB01-0AX1 6AV6645-0GC01-0AX1 6AV6645-0GF01-0AX1
Special operator controls
• Stop button
• Emergency stop button (forced
blocking)
• Acknowledgement button
• Key-operated switch
• Illuminated pushbutton
• Handwheel
USA version
With handwheel key
switch and two illuminated pushbutton
No
No
USA version
With integrated
enabling- and
emergency-stop
button
USA version
With integrated
enabling- and
emergency-stop
button, handwheel,
key switch and two illuminated pushbuttons
USA version
RFID with integrated
enabling- and
emergency-stop
button, handwheel,
key switch and two illuminated pushbuttons
Yes
Yes
Yes
No
No
No
No
No
Yes
Yes
Yes
Yes
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Supply voltage
Supply voltage
DC
DC
DC
DC
DC
Via charging station
Yes
Yes
Yes
Yes
Yes
Via table power supply
Yes
Yes
Yes
Yes
Yes
Processor
Processor
ARM, 520 MHz
ARM, 520 MHz
ARM, 520 MHz
ARM, 520 MHz
ARM, 520 MHz
Memory
Type
Flash / RAM
Flash / RAM
Flash / RAM
Flash / RAM
Flash / RAM
6 MB usable memory
for user data
6 MB usable memory
for user data
6 MB usable memory
for user data
6 MB usable memory
for user data
6 MB usable memory
for user data
7.2 V
5 100 mA·h
500
4h
4h
Yes
Yes
Yes
7.2 V
5 100 mA·h
500
4h
4h
Yes
Yes
Yes
7.2 V
5 100 mA·h
500
4h
4h
Yes
Yes
Yes
7.2 V
5 100 mA·h
500
4h
4h
Yes
Yes
Yes
7.2 V
5 100 mA·h
500
4h
4h
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Usable memory for user data
6
USA version
Battery
Main battery
• Rated voltage
• Capacity
• Number of loading cycles, min
• Charging time, typ.
• Operating time, typ.
• Display for battery capacity
• Energy-saving mode
• Battery replacement during
operation
Type of output
Status LEDs
LED for safe
LED for communication
Yes
Yes
Yes
Yes
Yes
LED for battery
Yes
Yes
Yes
Yes
Yes
Vibrations
Yes
Yes
Yes
Yes
Yes
• Hardware clock (real-time clock)
• Battery-backed
Hardware clock,
battery backup,
synchronizable
Yes
Yes
Hardware clock,
battery backup,
synchronizable
Yes
Yes
Hardware clock,
battery backup,
synchronizable
Yes
Yes
Hardware clock,
battery backup,
synchronizable
Yes
Yes
• Synchronizable
Yes
Yes
Yes
Yes
Hardware clock,
battery backup,
synchronizable
Yes
Yes;
Via bypass battery
Yes
Interfaces
Interfaces
1 x Ethernet (RJ45)
1 x Ethernet (RJ45)
1 x Ethernet (RJ45)
1 x Ethernet (RJ45)
1 x Ethernet (RJ45)
Number of USB interfaces
1
1
1
1
1
USB port
1 x USB
1 x USB
1 x USB
1 x USB
1 x USB
Multi Media Card slot
1 MMC/SD card slot
1 MMC/SD card slot
1 MMC/SD card slot
1 MMC/SD card slot
1 MMC/SD card slot
Industrial Ethernet
• Industrial Ethernet interface
1 x Ethernet (RJ45)
1 x Ethernet (RJ45)
1 x Ethernet (RJ45)
1 x Ethernet (RJ45)
1 x Ethernet (RJ45)
WLAN
• Wireless LAN
• Supports rapid roaming
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Protocols
PROFINET
Yes
Yes
Yes
Yes
Yes
Supports protocol for PROFINET IO
Yes
Yes
Yes
Yes
Yes
Supports protocol for PROFIsafe
No
No
Yes
Yes
Yes
Time of day
Clock
• Type
6/158
Siemens IK PI · 2015
© Siemens AG 2014
Industrial Wireless Communication
Wireless Devices
SIMATIC Mobile Panel 277(F) IWLAN
■ Technical specifications (continued)
6AV6645-0FD01-0AX1 6AV6645-0FE01-0AX1 6AV6645-0GB01-0AX1 6AV6645-0GC01-0AX1 6AV6645-0GF01-0AX1
USA version
USA version
With handwheel key
switch and two illuminated pushbutton
USA version
With integrated
enabling- and
emergency-stop
button
USA version
With integrated
enabling- and
emergency-stop
button, handwheel,
key switch and two illuminated pushbuttons
USA version
RFID with integrated
enabling- and
emergency-stop
button, handwheel,
key switch and two illuminated pushbuttons
EMC
Emission of radio interference acc. to
EN 55 011
• Emission of radio interferences acc. Yes;
to EN 55 011 (limit class A)
The product is
designed for use in
industrial environments. When used in
residential areas, the
emission of radio interference according to
limit class B of
EN 55011 must be
ensured. For further
information refer to the
user documentation
Yes;
The product is
designed for use in
industrial environments. When used in
residential areas, the
emission of radio interference according to
limit class B of
EN 55011 must be
ensured. For further
information refer to the
user documentation
Yes;
The product is
designed for use in
industrial environments. When used in
residential areas, the
emission of radio interference according to
limit class B of
EN 55011 must be
ensured. For further
information refer to the
user documentation
Yes;
The product is
designed for use in
industrial environments. When used in
residential areas, the
emission of radio interference according to
limit class B of
EN 55011 must be
ensured. For further
information refer to the
user documentation
Yes;
The product is
designed for use in
industrial environments. When used in
residential areas, the
emission of radio interference according to
limit class B of
EN 55011 must be
ensured. For further
information refer to the
user documentation
Degree and class of protection
IP65 enclosure
Yes
Yes
Yes
Yes
Yes
Standards, approvals, certificates
Certifications
CE, cULus, C-TICK
CE, cULus, C-TICK
CE, cULus, C-TICK
CE, cULus, C-TICK
CE, cULus, C-TICK
CE mark
Yes
Yes
Yes
Yes
Yes
cULus
Yes
Yes
Yes
Yes
Yes
RCM (former C-TICK)
Yes
Yes
Yes
Yes
Yes
TÜV safety certification
Yes
Yes
Yes
Highest safety class achievable in
safety mode
• Performance level
according to EN ISO 13849-1:2008
• SIL according to IEC 61508:2010
e
e
e
SIL 3
SIL 3
SIL 3
6
Ambient conditions
Drop height
1.2 m
1.2 m
1.2 m
1.2 m
1.2 m
Operating temperature
• Operation
0 °C to +40 °C
0 °C to +40 °C
0 °C to +40 °C
0 °C to +40 °C
0 °C to +40 °C
Storage/transport temperature
• Transport, storage
-20 °C to +60 °C
-20 °C to +60 °C
-20 °C to +60 °C
-20 °C to +60 °C
-20 °C to +60 °C
Relative humidity
• max. relative humidity
80 %
80 %
80 %
80 %
80 %
Operating systems
Operating system
Windows CE
Windows CE
Windows CE
Windows CE
Windows CE
16
16
16
16
16
Functionality under WinCC
(TIA Portal)
Libraries
Yes
Yes
Yes
Yes
Yes
Task planner
Yes
Yes
Yes
Yes
Yes
Message system
• Number of messages
• Bit messages
• Analog messages
4 000
Yes
Yes
4 000
Yes
Yes
4 000
Yes
Yes
4 000
Yes
Yes
4 000
Yes
Yes
300
500
1 000
64 KB integrated
Flash, expandable
300
500
1 000
64 KB integrated
Flash, expandable
300
500
1 000
64 KB integrated
Flash, expandable
300
500
1 000
64 KB integrated
Flash, expandable
300
500
1 000
64 KB integrated
Flash, expandable
2 048
Yes
Yes
2 048
Yes
Yes
2 048
Yes
Yes
2 048
Yes
Yes
2 048
Yes
Yes
Languages
Online languages
• Number of online/runtime
languages
Recipe administration
• Number of recipes
• Data records per recipe
• Entries per data record
• Recipe memory
Variables
• Number of variables per device
• Limit values
• Multiplexing
Siemens IK PI · 2015
6/159
© Siemens AG 2014
Industrial Wireless Communication
Wireless Devices
SIMATIC Mobile Panel 277(F) IWLAN
■ Technical specifications (continued)
6AV6645-0FD01-0AX1 6AV6645-0FE01-0AX1 6AV6645-0GB01-0AX1 6AV6645-0GC01-0AX1 6AV6645-0GF01-0AX1
Images
• Number of configurable images
Image objects
• Text objects
• Graphics object
Complex image objects
• Status/control
• dynamic objects
USA version
USA version
With handwheel key
switch and two illuminated pushbutton
USA version
With integrated
enabling- and
emergency-stop
button
USA version
With integrated
enabling- and
emergency-stop
button, handwheel,
key switch and two illuminated pushbuttons
USA version
RFID with integrated
enabling- and
emergency-stop
button, handwheel,
key switch and two illuminated pushbuttons
500
500
500
500
500
10 000 text elements
Bit maps, icons,
vector graphics
10 000 text elements
Bit maps, icons,
vector graphics
10 000 text elements
Bit maps, icons,
vector graphics
10 000 text elements
Bit maps, icons,
vector graphics
10 000 text elements
Bit maps, icons,
vector graphics
With SIMATIC S7
Diagrams, bar graphs,
sliders, analog display, invisible buttons
With SIMATIC S7
Diagrams, bar graphs,
sliders, analog display, invisible buttons
With SIMATIC S7
Diagrams, bar graphs,
sliders, analog display, invisible buttons
With SIMATIC S7
Diagrams, bar graphs,
sliders, analog display, invisible buttons
With SIMATIC S7
Diagrams, bar graphs,
sliders, analog display, invisible buttons
500
400
500
400
500
400
500
400
20
20
20
20
20
20
20
20
20
20
10 000
10 000
10 000
10 000
10 000
50
32
Yes
50
32
Yes
50
32
Yes
50
32
Yes
50
32
Yes
Alarms, report (shift
report), PROFINET
Alarms, report (shift
report), PROFINET
Alarms, report (shift
report), PROFINET
Alarms, report (shift
report), PROFINET
Alarms, report (shift
report), PROFINET
USB, Ethernet, automatic transfer recognition
Yes
USB, Ethernet, automatic transfer recognition
Yes
USB, Ethernet, automatic transfer recognition
Yes
USB, Ethernet, automatic transfer recognition
Yes
USB, Ethernet, automatic transfer recognition
Yes
S7-200, S7- 300/400
see section on
"System interfaces"
Yes
Yes
Yes
254
255
S7-200, S7- 300/400
see section on
"System interfaces"
No
No; Available soon
Yes
254
255
S7-200, S7- 300/400
see section on
"System interfaces"
No
No; Available soon
Yes
254
255
S7-200, S7- 300/400
see section on
"System interfaces"
No
No; Available soon
Yes
127
Yes
127
Yes
127
127
127
Yes
256
Yes
256
Yes
256
Yes
2m
8m
Yes
2m
8m
Yes
2m
8m
Lists
• Number of text lists per project
500
• Number of graphics lists per project 400
Archiving
• Number of archives per device
• Number of measuring points
per project
• Number of entries per archive
6
Security
• Number of user groups
• Number of user rights
• Password export/import
Logging through printer
• Recording/Printing
Transfer (upload/download)
• Transfer of configuration
• Wireless LAN
Process coupling
• Connection to controller
•
•
•
•
•
S7-200, S7- 300/400
see section on
"System interfaces"
Yes
S7-1200
S7-1500
Yes
Zones
Yes
- Number of zones per project, max. 254
- Number of transponders
255
for zones per project, max.
Effective range
- Number of effective ranges
per project, max.
- Number of transponders for
effective ranges per project, max.
Transponder
Yes
- Number of transponders
256
per project, max.
- Adjustable distance range
Yes
- Adjustable distance, min.
2m
- Adjustable distance, max.
8m
I/O/Options
I/O devices
• Multi Media Card
Barcode reader
Yes
Barcode reader
Yes
Barcode reader
Yes
Barcode reader
Yes
Barcode reader
Yes
Mechanics/material
Type of housing (front)
Plastic
Plastic
Plastic
Plastic
Plastic
Dia 290 mm /
D 103 mm
Dia 290 mm /
D 103 mm
Dia 290 mm /
D 103 mm
Dia 290 mm /
D 103 mm
Dia 290 mm /
D 103 mm
2.2 kg
2.2 kg
2.2 kg
2.2 kg
2.2 kg
Dimensions
Housing diameter/depth (mm)
Weights
Weight (without packaging)
6/160
Siemens IK PI · 2015
© Siemens AG 2014
Industrial Wireless Communication
Wireless Devices
SIMATIC Mobile Panel 277(F) IWLAN
■ Ordering data
SIMATIC Mobile Panel 277 IWLAN
V2 (RoW version 1))
• Communication via WLAN
(PROFINET)
• Communication via WLAN
(PROFINET)
with integrated handwheel,
key-operated switch and two
illuminated pushbuttons
SIMATIC Mobile Panel 277F
IWLAN V2 PROFIsafe
(RoW version 1))
• Communication via WLAN
(PROFINET)
with acknowledgement button and
emergency stop button
• Communication via WLAN
(PROFINET)
with acknowledgement button and
emergency stop button with integrated handwheel, key-operated
switch, and two illuminated pushbuttons
• RFID tag version: Communication
via WLAN (PROFINET) with
acknowledgement button and
emergency stop button with
integrated handwheel,
key-operated switch, and two
illuminated pushbuttons
SIMATIC Mobile Panel 277
IWLAN V2 (USA version)
• Communication via WLAN
(PROFINET)
• Communication via WLAN
(PROFINET)
with integrated handwheel,
key-operated switch and two
illuminated pushbuttons
SIMATIC Mobile Panel 277F
IWLAN V2 PROFIsafe
(USA version)
• with acknowledgement button and
emergency stop button
• with acknowledgement button and
emergency stop button with
integrated handwheel,
key-operated switch, and two
illuminated pushbuttons
• with acknowledgement button and
emergency stop button with
integrated handwheel,
key-operated switch, and two
illuminated pushbuttons
(tag version)
Article No.
Article No.
Accessories
6AV6645-0DD01-0AX1
6AV6645-0DE01-0AX1
See HMI accessories
Note: Please order the table-top
power supply or charging station as
well. Required for charging the battery.
Documentation (to be ordered separately)
You can find the manuals for the
Mobile Panels on the Internet at:
1)
6AV6645-0EB01-0AX1
6AV6645-0EC01-0AX1
http://support.automation.siemens.com/WW/view/en/11599011/
133300
RoW version:
"Rest of World" version: Version for worldwide sales except in the U.S.
Note:
The Function Manuals "Fail-Safe Operation of the
Mobile Panel 277F IWLAN V1" are available for downloading
in English, German, and Japanese.
http://support.automation.siemens.com/WW/view/en/31255853
6AV6645-0EF01-0AX1
6
6AV6645-0FD01-0AX1
6AV6645-0FE01-0AX1
6AV6645-0GB01-0AX1
6AV6645-0GC01-0AX1
6AV6645-0GF01-0AX1
Starter kit
SIMATIC Mobile Panel 277(F)
IWLAN (RoW version1))
for
• Mobile Panel 277 IWLAN V2
• Mobile Panel 277F IWLAN V2
6AV6651-5GA01-0AA1
6AV6651-5HA01-0AA1
■ More information
Additional information is available in the Internet under:
http://www.siemens.com/simatic-mobile-panels
Note:
Do you need a specific modification or addition to the products
described here? Then take a look under "Customer-specific
products". There, you will find information on ordering additional
and standard industry products as well as possibilities for
customer-specific modifications and adjustments.
Siemens IK PI · 2015
6/161
© Siemens AG 2014
Industrial Wireless Communication
WirelessHART
General
■ Overview
HART (Highway Addressable Remote Transducer) is the
protocol for bus-addressed field devices. It is not a fieldbus,
but a version of the digital field communication that contains
many of the functionalities of fieldbuses.
WirelessHART is the wireless HART communication to fieldbuses in the process industry. The HART Communication
Foundation (HCF) specified WirelessHART and published it as
part of the HART standard V7.1. The radio transmission is based
on the wireless communications standard IEEE 802.15.4.
High availability is achieved by means of the meshed network
architecture (each field device is simultaneously a repeater) with
redundant communication paths and constantly changing
frequency channels (channel hopping). 128-bit encryption in
conjunction with authentication and validation of each data
packet ensures secure data transfer and prevents unauthorized
access to the field devices.
SITRANS
MDS
OS
Industrial Ethernet
Controller without
HART support
SITRANS
AW200
4 –20 mA
IEEE 802.11
As a basic principle, a WirelessHART network consists of
WirelessHART field devices and a WirelessHART gateway that
receives the data from the field devices and forwards it to the
automation system.
4 –20 mA
Wireless
HART
Industrial
Ethernet
4 –20 mA
IE/WSNPA LINK
Wireless communication with WirelessHART
6/162
Siemens IK PI · 2015
PROFIBUS
6
G_IK10_XX_30348
Remote I/O station
w/o HART support
© Siemens AG 2014
Industrial Wireless Communication
WirelessHART
SITRANS P280 for gauge and absolute pressure
■ Overview
■ Application
The SITRANS P280 is a WirelessHART field device for measuring
absolute and gauge pressure.
The measuring ranges for absolute and gauge pressure
measurements are 0 to 1.6, 10, 50, 200 and 320 bar (0 to 23,
145, 725, 2900 and 4641 psi).
The sensor is integrated into the transmitter casing.
On the wireless communication side, the transmitter supports
the WirelessHART standard. For initial commissioning in
particular, a HART modem can be connected to the transmitter.
You can alternatively opt for simple and easy local operation
using the pushbuttons w/o any additional handset devices.
It can be used in all industries and applications in non-explosive
areas.
■ Design
SITRANS P280 for flexible and cost-effective applications in
pressure monitoring
• Supports the WirelessHART standard (HART V 7.1)
• Very high security level for wireless data transmission
• Built-in local user interface (LUI) with 3-button operation
• Optimum display and readability using graphics display
(104 x 80 pixels) with integrated background illumination
• Stand-by (deep sleep phase) can be activated and deactivated on the device with a push of a button
• Battery power supply
• Battery service live up to 5 years
• Extend battery service life with HART modem interface which
can be shut off
• Optimized power consumption through new design, and
increase in battery service life
• Simple configuration thanks to SIMATIC PDM
• Device meets IP65 degree of protection
• Can be used for absolute and gauge pressure measurements
■ Benefits
The SITRANS P280 is a pressure transmitter that features
Wireless HART as the standard communication interface.
Also available is a wired interface to connect a HART modem:
• Flexible pressure measurements
• Save costs on writing for difficult installation conditions.
Wireless technology offers cost advantages in cases where
extensive wiring cots would normally apply.
• It enables additional hitherto unfeasible measuring points,
particularly for monitoring purposes.
• Easy installation on moveable equipment parts
• Enables cost-effective temporary measurements, for example
for process optimizations.
• Optimum addition to wired communication and expansion of
solution options for system solutions in process automation
The SITRANS P280 has a robust aluminum enclosure and is
suitable for outside use. It conforms with the IP65 safety class.
The operating temperature range is -40 to +80 °C (-40 to
+176 °F). Power supply is provided through an integrated
battery, which is available as an accessory. The device is only
approved for operation with this battery.
The aerial features a rotatable joint which can be used for
directional alignment. Wireless signals can thus be optimally
received and transmitted.
A special highlight is the option for direct operation on the
device. The operating strategy used in this case seamlessly
integrates into the strategy of all new Siemens field devices.
Using the device's control buttons, it is easy to turn the HART
modem interface of the device on and off. The device can be put
to passive status and reactivated at any time. This helps to extend the service life of the battery.
The SITRANS P280 transmitter features a ceramic measuring
cell for gauge and absolute pressure measurements.
■ Function
The SITRANS P280 can integrate itself into a WirelessHART
network. It can be parameterized and operated through this
network. Measured process values are transported via the network to the SIEMENS IE/WSN-PA link.
Field device data received by the IE/WSN-PA LINK is transmitted
to the connected systems, for example the process control system SIMATIC PCS 7. For an introduction to the mode of operation
of WirelessHART, please see the FI 01 catalogue, section 9 or
http://www.siemens.com/wirelesshart.
Detailed information on IE/WSN-PA can be found in the FI 01
catalogue, section 8 or http://www.siemens.com/wirelesshart.
Siemens IK PI · 2015
6/163
6
© Siemens AG 2014
Industrial Wireless Communication
WirelessHART
SITRANS P280 for gauge and absolute pressure
■ Integration
■ Configuration
Connecting to SIMATIC PCS 7
The integration of field devices in SIMATIC PCS 7 and other
process control systems can now be done seamlessly and costeffectively with wireless technology, especially in situations
where high wiring costs may be expected. Of particular interest
are measuring points which are to be added and for which no
MSR wiring is available.
Siemens WirelessHART devices are designed for optimum
compatibility with products in the SCALANC W range.
Where larger distances between the IW/WSN-PA LINK and
control systems need to be overcome, this connection can also
be implemented on a wireless and cost-effective basis using the
products of the SCALANCE W family.
ES
OS
MS
Industrial Ethernet
SITRANS
AW210
SIMATIC
system
SITRANS
AW200
6
SIMATIC ET 200
with HART support
IE/WSNPA LINK
SITRANS
AW210
SITRANS SITRANS
P280
TF280
DP/PA
LINK
PROFIBUS
Wireless
HART
PROFIBUS PA
Integration of a meshed network in SIMATIC PCS7
6/164
Siemens IK PI · 2015
Configuration of the SITRANS P280 may be carried out as
follows:
• Initial start-up for the SITRANS P280 with SIMATIC PDM is
generally carried out via a HART modem or the integrated
local user interface, since the network ID and Join key must be
set up on the device before it can be accepted and integrated
into the WirelessHART network.
• Once it is integrated into the network, the device can be
conveniently operated with the WirelessHART network, the
onsite HART modem or via the local user interface.
© Siemens AG 2014
Industrial Wireless Communication
WirelessHART
SITRANS P280 for gauge and absolute pressure
■ Technical specifications
SITRANS P280 WirelessHART Pressure Transmitter
SITRANS P280 WirelessHART Pressure Transmitter
Mode of operation
Design
Measuring principle
piezo-resistive
Measured variable
Gauge and absolute pressure
Gauge pressure input
Measuring range
Overload limit/Burst pressure
0 ... 1.6 bar (0 ... 23 psi)
4 bar (58 psi)
0 ... 10 bar (0 ... 145 psi)
20 bar (290 psi)
0 ... 50 bar (0 ... 725 psi)
100 bar (1 450 psi)
0 ... 200 bar (0 ... 2900 psi)
400 bar (5 801 psi)
0 ... 320 bar (0 ... 4641 psi)
640 bar (9 282 psi)
Units
mbar, bar, m4H2O, i4H2O, atm, Torr,
gcm², kgcm², Pa, kPa, MPa, psi,
mmHG, mmH2O, ftH2O, inHG, inH2O
Enclosure material
low-copper die-cast aluminum,
GD-AISi12 (Fe)
Shock resistance
in accordance with
DIN EN 60068-2-29 / 03.95
Resistance to vibration
in accordance with
EN 60068-2-6/ 12.07
Weight
• without battery
• With battery
1.5 kg (3.31 lb)
1.6 kg (3.53 lb)
Dimensions (W x H x D)
See Dimensional drawing
Process connection
• G½B male thread to EN 837-1
• ½-14 NPT
Sensor break
Is recognized
Displays and controls
Absolute pressure input
Measuring range
Overload limit/Burst pressure
0 ... 1.6 bar a (0 ... 23 psi a)
4 bar a (58 psi a)
0 ... 10 bar a (0 ... 145 psi a)
20 bar a (290 psi a)
Display (with illumination)
• Size of display
• Number of digits
• Number of spaces after comma
0 ... 50 bar a (0 ... 725 psi a)
100 bar a (1450 psi a)
Setting options
0 ... 200 bar a (0 ... 2900 psi a)
400 bar a (5801 psi a)
0 ... 320 bar a (0 ... 4641 psi a)
640 bar a (9282 psi a)
Auxiliary power
Units
mbar, bar, m4H2O, i4H2O, atm, Torr,
gcm², kgcm², Pa, kPa, MPa, psi,
mmHG, mmH2O, ftH2O, inHG, inH2O
Battery
Output
Output signal
2.4 GHz Wireless signal with TSMP
(Time Synchronized Mesh Protocol)
Measuring accuracy
According to IEC 60770-1
Error in measurement at
limit setting including hysteresis
and reproducibility
typically 0.17 % of span,
max. 0.25 % of sensor span
Long-term stability
max. ± 0.25 % of sensor/year span
Influence of ambient temperature
max. ± 0.2 %/10 K of sensor span
Ambient conditions
• Ambient temperature
• Storage temperature
• Relative humidity
-40 ... +80 °C (-40 ... +176 °F)
(in ambient temperatures
below -20 °C (-4 °F) and
above +70 °C (158 °F),
readability of the display is limited.)
-40 ... +85 °C (-40 ... +185 °F)
< 95 %
Climatic class
4K4H in accordance with
EN 60721-3-4(stationary use at locations not protected against weather)
Degree of protection
IP65/NEMA 4
Permissible medium temperature
-40 ... 85 °C (-40 ... +185 °F)
• on site with 3 buttons
• with SIMATIC PDM
or HART Communicator
3.6 V DC
Communication
Radio
WirelessHART V7.1 conforming
Transmission frequency band
2.4 GHz (ISM-Band)
Transmission range under reference
conditions
Up to 250 m (line of sight)
in outside areas
Up to 50 m (greatly dependent on
obstacles) in inside areas
Communication interfaces
Rated conditions
104 x 80 pixels
adjustable
adjustable
• HART communication with HART
modem
• WirelessHART
Certificates and approvals
Wireless communication approvals
R&TTE, FCC
General product safety
CSAUS/C, CE, UL
Classification according to pressure
equipment directive (PED 97/23/EC)
Gases: Fluid group 1
Liquids: Fluid group 1;
meets requirements as per Section 3,
Subsection 3 (good engineering
practice)
Siemens IK PI · 2015
6/165
6
© Siemens AG 2014
Industrial Wireless Communication
WirelessHART
SITRANS P280 for gauge and absolute pressure
■ Ordering data
Article No.
Article No.
Configuration
SITRANS P280 WirelessHART
pressure transmitter
(Required battery not included
with delivery, see accessories)
Further designs
7MP1120 - 7 7 7 7 7 - 7 7 7 0
0
Measuring span
Gauge pressure
• Measuring point description
max. 16 digits entered
in plain text
Y15: ....................
Y15
• Measuring point message
max. 27 characters entered in
plain text:
Y16: ....................
Y16
• 0 ... 1.6 bar (0 ... 23 psi)
D
• 0 ... 10 bar (0 ... 145 psi)
E
• 0 ... 50 bar (0 ... 725 psi)
F
• 0 ... 200 bar (0 ... 2900 psi)
G
Lithium battery
for SITRANS TF280/P280
7MP1990-0AA00
• 0 ... 320 bar (0 ... 4641 psi)
H
Mounting bracket, steel
7MF4997-1AC
Mounting bracket, stainless steel
7MF4997-1AJ
Cover, die-cast aluminum,
without window
7MF4997-1BB
Cover, die-cast aluminum,
with window
7MF4997-1BE
IE/WSN-PA LINK
with integral,
non-detachable antenna
6GK1411-6CA40-0AA0
IE/WSN-PA LINK
6GK1411-6CA40-0BA0
HART modem with USB interface
7MF4997-1DB
SIMATIC PDM
see Catalog FI 01, Chap. 8
Accessories
Absolute pressure
• 0 ... 1.6 bar a (0 ... 3 psia)
M
• 0 ... 10 bar a (0 ... 145 psia)
N
• 0 ... 50 bar a (0 ... 725 psia)
P
• 0 ... 200 bar a (0 ... 2900 psia)
Q
• 0 ... 320 bar a (0 ... 4641 psia)
R
Wetted parts
6
Order code
Stainless steel tag plate
Measuring cell filling
Dry measuring cell
Please add "-Z" to Article No.
and specify Order code(s) and
plain text.
K
Ceramic
Display
Display, visible
1
Enclosure
Die-cast aluminum
1
Process connection
G½ as per EN 837-1
0
½-14 NPT
1
Explosion protection
A
Without
Antenna
Variable, attached to device
6/166
Siemens IK PI · 2015
A
© Siemens AG 2014
Industrial Wireless Communication
WirelessHART
SITRANS TF280, WirelessHART
■ Overview
■ Application
The SITRANS TF280 is a WirelessHART field device for
measuring temperature with a Pt100 sensor.
This sensor can be installed directly on the field device, or connected at an offset with a cable connection. On the wireless
communication side, the transmitter supports the WirelessHART
standard. A HART modem can be connected to the transmitter
particularly for initial parameterization.
It can be used in all industries and applications in non-explosive
areas.
■ Design
The SITRANS TF280 has a robust aluminum enclosure and is
suitable for outside use. It conforms with the IP65 safety class.
The operating temperature range is -40 to +80 °C (-40 to
+176 °F). Power supply is provided through an integrated
battery, which is available as an accessory. The device is only
approved for operation with this battery.
SITRANS TF280 for flexible and cost-effective temperature
measurements
• Supports the WirelessHART standard (HART V 7.1)
• Very high security level for wireless data transmission
• Built-in local user interface (LUI) with 3-button operation
• Optimum display and readability using graphics display
(104 x 80 pixels) with integrated background lighting
• Stand-by (deep sleep phase) on device can be turned on and
off with a push of a button
• Battery power supply
• Battery service live up to 5 years
• Extend battery service life with HART modem interface which
can be shut off
• Optimized power consumption through new design, and
increase in battery service life
• Simple configuration thanks to SIMATIC PDM
• Housing meets IP65 degree of protection
• Supports all Pt100 sensors as per IEC 751/DIN EN 60751
■ Benefits
The SITRANS TF280 is a temperature transmitter that features
Wireless HART as the standard communication interface.
Also available is a wired interface to connect a HART modem:
• Flexible temperature measurement
• Save costs on writing for difficult installation conditions.
Wireless technology offers cost advantages in cases where
extensive wiring cots would normally apply.
• It enables additional hitherto unfeasible measuring points,
particularly for monitoring purposes
• Easy installation also on moveable equipment parts
• Enables cost-effective temporary measurements, for example
for process optimizations.
• Optimum addition to wired communication and expansion of
solution options for system solutions in process automation
The aerial features a rotatable joint which can be used for
directional alignment. Wireless signals can thus be optimally
received and transmitted.
A special highlight is the option for direct operation on the
device. The operating strategy used in this case seamlessly
integrates into the strategy of all new SIEMENS field devices.
Using the device's control buttons, it is easy to turn the HART
modem interface of the device on and off. The device can be put
to passive status and reactivated at any time. This helps to
extend the service life of the battery.
The SITRANS TF280 transmitter features a cable gland or a
Pt100 sensor including protective piping.
■ Function
The SITRANS TF280 can integrate itself into a WirelessHART
network. It can be parameterized and operated through this
network. Measured process values are transported via the network to the SIEMENS IE/WSN-PA LINK.
Field device data received by the IE/WSN-PA LINK is transmitted
to the connected systems, for example the process control system SIMATIC PCS 7. For an introduction to the mode of operation
of WirelessHART, please see the FI 01 catalog chapter 8 or at
http://www.siemens.com/wirelesshart.
Detailed information on IE/WSN-PA LINK can be found
in the FI 01 catalog chapter 8 or at
http://www.siemens.com/wirelesshart.
Siemens IK PI · 2015
6/167
6
© Siemens AG 2014
Industrial Wireless Communication
WirelessHART
SITRANS TF280, WirelessHART
■ Integration
■ Technical specifications
Connecting to SIMATIC PCS 7
The integration of field devices in SIMATIC PCS 7 and other
process control systems can now be done seamlessly and costeffectively with wireless technology, especially in situations
where high wiring costs may be expected. Of particular interest
are measuring points which are to be added and for which no
MSR wiring is available.
Where larger distances between the IW/WSN-PA LINK and
control systems need to be overcome, this connection can also
be implemented on a wireless and cost-effective basis using the
products of the SCALANCE W family.
The Siemens WirelessHART devices are designed for optimum
compatibility with products of the SCALANCE W family.
ES
OS
MS
The SITRANS TF280 can be mechanically installed in two ways:
• direct at the measuring point with a M20x1.5 thread
Connection to other threads can be done via the adapter.
• offset from Pt100 sensor, which is connected to the transmitter
via a cable
The details in the table below relate to the transmitter without
taking into account a connected sensor, unless otherwise
specified.
SITRANS TF280 WirelessHART temperature transmitter
Input
Sensor
• Sensor type
• Connection
• Measuring range
Cable length SITRANS TF280 and
Pt100 sensor element
Pt100 as per IEC 751/EN 607511)
Two, three or four-wire system
-200 ... +850 °C (-328 ... +1560 °F)
3m
Measuring accuracy2)
Industrial Ethernet
SITRANS
AW210
SIMATIC
system
SITRANS
AW200
Accuracy
< 0.4 % of the measured value
Long-term drift
< 0.035 % of the measuring range
in first year
Temperature drift
max. ±0.01 °C/10 K
Conditions of use
6
SIMATIC ET 200
with HART support
Wireless
HART
Ambient temperature
-40 ... +80 °C (-40 ... +176 °F)
Storage temperature
-40 ... +85 ° C (-40 ... +185 °F)
Relative humidity
< 95%
Climatic class
4K4H in accordance with
EN 60721-3-4
(stationary use at locations not
protected against weather)
Degree of protection
IP65/NEMA 4
IE/WSNPA LINK
80 °C (176 °F)
Max. permissible temperature at
transmitter for directly mounted Pt100
SITRANS SITRANS
P280
TF280
PROFIBUS
SITRANS
AW210
DP/PA
LINK
PROFIBUS PA
Integration of a meshed network into SIMATIC PCS 7
■ Configuration
Configuration of the SITRANS TF280 transmitter may be carried
out as follows:
• Initial start-up for the SITRANS TF280 with SIMATIC PDM is
generally carried out via a HART modem or the integrated
local user interface, since the network ID and join key must be
set up on the device before it can be accepted and integrated
into the WirelessHART network.
• Once it is integrated into the network, the device can be
conveniently operated with the WirelessHART network, the
onsite HART modem or via the local user interface.
6/168
Siemens IK PI · 2015
Design
Enclosure
Die-cast aluminum
Shock resistance
in accordance with
DIN EN 60068-2-29 / 03.95
Resistance to vibration
DIN EN 60068-2-6/12.07
Weight
• without battery
• With battery
1.5 kg (3.3 lb)
1.6 kg (3.5 lb)
Dimensions (W x H x D)
See “Catalog FI 01“
Thread for cable gland/sensor
connection
M20x1.5
other threads via adapter
Cable between transmitter and
sensor element
 3 m for two-, three- or four-wire
connections
Cable resistance < 1 
(setting range in m 0...9999)
Sensor break
Is recognized
© Siemens AG 2014
Industrial Wireless Communication
WirelessHART
SITRANS TF280, WirelessHART
■ Technical specifications (continued)
■ Ordering data
SITRANS TF280 WirelessHART temperature transmitter
Configuration
Displays and controls
SITRANS TF280 WirelessHART
Temperature transmitter
(Required battery not included with
delivery, see accessories)
Display (with illumination)
• Size of display
• Number of digits
• Number of spaces after comma
Setting options
104 x 80 pixels
adjustable
adjustable
Connections/cable entry
Cable gland M20x1.5 1)
C
Sensor pipe with Pt100, G½"
male thread,
pre-mounted and connected
D
3.6 V DC
Display
Communication
Digital display, visible
Wireless standard
WirelessHART V7.1 conforming
Enclosure
Transmission frequency band
2.4 GHz (ISM-Band)
Die-cast aluminum
Range under reference conditions)
Up to 250 m (line of sight)
in outside areas
Explosion protection
Up to 50 m (greatly dependent on
obstacles) in inside areas
Not included
• HART communication with
HART modem
• WirelessHART
Variable, attached to device
Communication interfaces
7MP1110 - 0 A 7 7 7 - 0 7 7 0
• on site with 3 buttons
• with SIMATIC PDM
or HART Communicator
Auxiliary power
Battery
Article No.
Certificates and approvals
Wireless communication approvals
R&TTE, FCC
Pressure equipment directive
This device does not fall under the
pressure equipment directive.
1)
Preassembled Pt100: Class A (maximum MES: 0.15 + 0.002*|t| °C)
2)
Error calculation:
• Probable overall error = Ö(MES2 + AET2 + LTD2 + ATE2)
• Maximum overall error = MES + AET + LTD + ATE
• |t|: Absolute total of the measured temperature
• MES: Measuring error of the sensor
• AET: Measuring error of the transmitter (A/D conversion)
• LTD: Long-term drift
• ATE: Drift via ambient temperature
1
1
A
Antenna
A
Further designs
Please add "-Z" to Article No.
and specify Order code(s) and
plain text.
Order code
• Measuring point number (TAG No.)
max. 16 digits entered
in plain text
Y15: ....................
Y15
• Measuring point message
max. 27 characters entered in
plain text:
Y16: ....................
Y16
6
Accessories
Lithium battery
for SITRANS TF280/P280
7MP1990-0AA00
Mounting bracket, steel
7MF4997-1AC
Mounting bracket, stainless steel
7MF4997-1AJ
Cover, die-cast aluminum,
without window
7MF4997-1BB
Cover, die-cast aluminum,
with window
7MF4997-1BE
Thread adapter M20x1.5
(male thread) on ½-14 NP
(female thread)
7MP1990-0BA00
Thread adapter M20x1.5
(male thread) on G½B
(female thread)
7MP1990-0BB00
IE/WSN-PA LINK
with integral,
non-detachable antenna
6GK1411-6CA40-0AA0
IE/WSN-PA LINK
N connector for connection of
external antennas
6GK1411-6CA40-0BA0
HART modem with USB interface
7MF4997-1DB
1)
Please order sensor separately.
Siemens IK PI · 2015
6/169
© Siemens AG 2014
Industrial Wireless Communication
WirelessHART
SITRANS AW200 WirelessHART adapter
■ Overview
■ Benefits
• High quality and service life
• Save on wiring costs in difficult installation conditions (e.g. for
moveable components) and for temporary installations.
• Subsequent integration of an installed field device with a
HART interface into maintenance and diagnostic systems if
the control system does not feature the required communication mechanisms. See page 9/3.
• Proven HART devices can continue to be used for wireless
communication without any limitations.
• Field devices with a 4 ... 20 mA interface (without HART) can
also be connected.
• Intelligent energy management to achieve the best possible
service life for the installed battery unit
• Optimum addition to wired communication and expansion of
solution options for system solutions in process automation
• Burst mode and event notification configuration for the
adapter and connected field devices.
SITRANS AW200 WirelessHART Adapter
The SITRANS AW200 WirelessHART adapter is a batterypowered communication component, which integrates HART
and 4 ... 20 mA field devices into a WirelessHART network.
On the wireless communication side, the adapter supports the
WirelessHART standard. HART and 4 ... 20 mA field devices are
connected on the field device side.
6
The SITRANS AW200 WirelessHART adapter
• support the WirelessHART standard (HART V 7.1)
• features a very high degree of security for wireless data
transmission
• integrates one 4 ... 20 mA field device or up to four HART field
devices (in multidrop mode) into a WirelessHART network
• features intelligent energy management for the power supply
of connected field devices
• can be easily parameterized using SIMATIC PDM
6/170
Siemens IK PI · 2015
■ Application
The WirelessHART adapter can be used in a number of different
applications:
• Access to installed basis
Diagnostic information is obtained from existing wired HART
devices thanks to the permanent electrical connection of a
WirelessHART adapter, and is sent to system-based asset
management software such as SITRANS MDS.
• Status monitoring of system
Wireless devices are mounted at critical points in the system,
which are not usually connected to the control room due to
difficult accessibility or extensive costs for wiring. Better data
flow and diagnostics increase plant reliability, transparency
and safety.
• Process optimization
Temporary installation of a 4 ... 20mA or standard HART
device together with a SITRANS AW200 WirelessHART
adapter allows easier, flexible monitoring and plant optimization at lower costs.
• Process monitoring
Measured values, for example from tanks or silos, are transmitted to a higher-level system at regular intervals, together
with the device and battery status.
© Siemens AG 2014
Industrial Wireless Communication
WirelessHART
SITRANS AW200 WirelessHART adapter
■ Design
■ Function
SITRANS AW200 WirelessHART Adapter consists of
• An enclosure with a fitted aerial
• Electronics
• A high-performance lithium battery unit
ES
OS
MS
Industrial Ethernet
SIMATIC
system
4
3
2
SITRANS
AW200
1
SIMATIC ET 200
with HART support
Wireless
HART
IE/WSNPA LINK
6
5
1
2
3
4
5
6
LED
Push button
Plug to connect battery
Battery compartment
Terminals 1 to 6
Terminal tag for HART modem
SITRANS AW200 Wireless-HART Adapter, assembly
The enclosure can be opened by loosening 4 screws. This
enables you to access the electronics and battery unit. The
battery unit is removed without the use of tools, since it is
connected to the housing with clips.
On the back of the enclosure is the connector with a fixing nut
onto which various different replaceable connecting pieces can
be screwed to mount the adapter straight onto a field device.
On the base of the enclosure is an optional cable inlet which can
be used for a cable gland. Up to 2 cables can be inserted for offset adapter installation.
SITRANS SITRANS
P280
TF280
PROFIBUS
DP/PA
LINK
6
PROFIBUS PA
SITRANS AW200 WirelessHART Adapter. functional diagram
Measured values and diagnostic information of connected field
devices with HART communication are transmitted via a wired
connection to the WirelessHART adapter. The adapter transmits
this information in the form of wireless signals to the IE/WSN-PA
link, the Siemens WirelessHART gateway. From here, the information is available to the network of the system.
If a field device with a 4 ... 20 mA output signal is connected to
the adapter, only the measured value will be transmitted.
Following configuration and integration into a WirelessHART network, each WirelessHART adapter is able to recognize its neighbors. It notes the strength of the wireless signal, synchronizes itself, receives network information and then establishes
connections to its neighbors in the wireless network. A WirelessHART network organizes itself. Manual settings for organization are not required.
Two and four-wire field devices can be connected to a WirelessHART adapter. In the case of a connected two-wire field device, voltage can be supplied by the adapter. Where multiple
two-wire field devices are connected (multi drop operation), the
adapter must be connected to an external power supply.
The WirelessHART adapter may also be connected in parallel to
an already existing installation which consists of a power supply
and a HART field device.
Siemens IK PI · 2015
6/171
© Siemens AG 2014
Industrial Wireless Communication
WirelessHART
SITRANS AW200 WirelessHART adapter
■ Function (continued)
Interface
Connection
■ Technical specifications
Function
Input
1
Power supply for the field device
Input
2
HART/4 ... 20 mA
3
External supply/Dimensions
4
High-resistance HART connection
5, 7
High-resistance HART connection
6, 8
Mass, high-resistance connection
Point-to-Point connection to a
4 ... 20 mA field device or
up to four HART field devices with
external power supply which are integrated using the multidrop method
Communication
HART communication using
multidrop method, 4 ... 20 mA power
signal with Point-to-Point connection
Protocol
HART V7 (compatible with previous
HART versions)
Transfer rate
1200 bits/s using HART multidrop
method
Terminal block with 6 screw connection clamps
Parameterization
SITRANS AW200 configured via HART. Configuration can be
carried out using a handheld communicator or, more conveniently, with a HART modem and the SIMATIC PDM configuration
software.
Initial startup of the adapter is usually carried out via
SIMATIC PDM and a HART modem or a handheld communicator. During initial startup, the network ID and join key are set in
the adapter. These parameters are used to integrate the adapter
into an existing WirelessHART network.
Following integration into the network, the adapter and
HART devices connected can be conveniently operated via
the WirelessHART network or with the local HART modem.
Siemens HART field devices for the adapter
6
HART and 4…20mA field devices can be connected to the
SITRANS AW200 WirelessHART adapter. Depending on the
electrical data of the field devices, they can receive their
power supply from the WirelessHART adapter or will require
an external power supply.
See http://www.siemens.com/automation/service&support for
FAQ with the latest information on connectivity for Siemens field
devices.
Note:
Siemens has only approved the Siemens HART field devices
listed there for the adapter, and will only provide technical support for these devices.
Based on HART specifications, it is generally possible to connect devices that are not listed, however with the following limitations:
• All warranties and liability will be excluded
• No technical support
Output
Communication
WirelessHART V7
Transfer rate
Nominal 250 kBits/s
Transmission frequency band
2.4 GHZ (ISM band)
Range (under reference conditions)
Outside areas up to 250 m,
within buildings up to 50 m
RF signal strength
Can be configured:
0 dBm and 10 dBm
Output signals
• WirelessHART Adapter
• 4 ... 20 mA field device
• HART field device
Max. measuring error
(4 ... 20 mA circuit)
0.125 % re: measuring range
Effect of ambient temperature
(4 ... 20 mA circuit)
5 µA/0°K
Rated conditions
Location
Outside/Inside
Ambient conditions
• Ambient temperature
-40 ... +80 °C (-40 ... +176 °F)
• Relative humidity
• Resistance to vibration
• Shock resistance
Electromagnetic compatibility
Siemens IK PI · 2015
Measured voltage and up to three
other variables may be selected from
the following: adapter temperature,
battery voltage, energy consumed,
expected battery service life
Scaled or linearized process values
up to four process variables, can be
configured via PDM or gateway
Measuring accuracy
(as per reference conditions
IEC 61298-2)
• Storage temperature
6/172
Point-to-Point connection to a HART
field device or
The capacity of the battery
decreases rapidly if ambient
temperature falls flow -30 °C.
-40 ... +85 °C (-40 ... +185 °F)
without batteries
< 21 °C with batteries
Max 90 % at 25 °C (non-condensating)
20  f  2000 Hz: 0.01 g²/Hz as per
IEC 68-2-64
15 g, 11 ms as per IEC 68-2-27
As per EN 61326, EN 301 489-1/17
and NAMUR NE 21
© Siemens AG 2014
Industrial Wireless Communication
WirelessHART
SITRANS AW200 WirelessHART adapter
■ Technical specifications (continued)
■ Ordering data
Configuration
Design
0.5 kg without battery, 0.75 kg with
battery
Enclosure
• Material
• Cable entry
SITRANS AW200
adapter for Wireless HART
Communication
Polyester (PBT FR)
2x M20x1.5
WirelessHART adapter AW200
with 4 ... 20 mA- or HART interface
Degree of protection
IP65, IP66; NEMA 4
Weight
Without battery
Aerial
Omnidirectional dipolar aerial,
vertical rotation
Power supply
Mounting adapter
M20x1.5 on M20x1.5, M20x1.5 on
G½, M20x1.5 on ½ - 14 NPT,
M20x1.5 on ¾ - 14 NPT
Certificates and approvals1)
Auxiliary power
Battery
Battery powered
A
A
Polyester
19 AH at 20 °C
Lithium battery
for SITRANS AW200
Service life
5 ... 7 years, depending on update
rate, connected field device and
ambient conditions
Thread adapter for direct mounting
of the adapter to a field device
8 ... 23 V DC
4 … 20mA (in accordance with
NAMUR Recommendation NE 43)
I  3.6 mA or I  21 mA
Short-circuit proof,
activated at voltages > 25 mA
0
Accessories
5 V DC ... 7.2 V DC
Voltage supply for one or more field
devices (in multidrop mode)
• Power
• Current
1
Enclosure
Lithium thionylchlorid high-performance battery unit
Capacity
• Fault current (not with multidrop)
• Protection
7MP3112 - 7 7 7 7 0 - 0 A A 0
Without
Power supply
Field device voltage supply (not in
multidrop mode)
• No-load voltage
• Current
Article No.
7MP3990-0AA00
• M20 thread adapter
7MP3990-0BA00
• Thread adapter G½
7MP3990-0BB00
• Thread adapter ½" - 14 NPT
7MP3990-0BC00
• Thread adapter ¾" - 14 NPT
7MP3990-0BD00
Mounting bracket for attaching to
wall/pipe, material: stainless steel
SS304, including cable gland
7MP3990-0CA00
6
< 30 V direct current
< 25 mA
Certificates and approvals
Wireless communication approvals
ETSI (R&TTE)
FCC Part 15.247 for wireless
applications in the 2.4 GHz
transmission frequency band
EN 300 328
1)
Additional approvals in process
Note:
Circuit diagrams and dimensional drawings can be found in
Catalog FI 01.
Siemens IK PI · 2015
6/173
© Siemens AG 2014
Industrial Wireless Communication
WirelessHART
SITRANS AW210 WirelessHART adapter
■ Overview
■ Application
SITRANS AW210 WirelessHART adapter
The WirelessHART adapter SITRANS AW210 is a communication component which can integrate a wide range of field
devices into a WirelessHART network. On the wireless communication side, the adapter supports the WirelessHART standard.
HART and 4 to 20 mA field devices are connected on the field
device side.
6
The WirelessHART adapter SITRANS AW210
• Supports the WirelessHART standard (HART V 7.1)
• Features an extremely high degree of security for wireless
data transmission.
• Integrates a 4 to 20 mA field device into a WirelessHART
network
• Integrates up to eight HART field devices (in multidrop mode)
into a WirelessHART network
• Can be powered with the 4 to 20 mA loop or an external power
supply
• Power management can be activated to minimize energy
consumption
• Easy to configure with SIMATIC PDM, AMS, Handheld 475.
The WirelessHART adapter can be used in a number of different
applications:
• Access to installed basis
Diagnostic information is obtained from existing wired HART
devices thanks to the permanent electrical connection of a
WirelessHART adapter and power from the 4 to 20 mA loop.
This information is sent to central system-based asset
management software such as SITRANS MDS.
• Status monitoring of the plant
Wireless devices are mounted at critical points in the plant
which are not usually connected to the control room due to
difficult access or high wiring costs. Better data flow and
diagnostics increase plant reliability, transparency and safety.
• Process optimization
Temporary installation of a 4 to 20mA or standard HART
device together with a SITRANS AW210 WirelessHART
adapter allows easier, flexible monitoring and plant optimization at lower costs. SITRANS AW210 can also be usefully
used where there is already an external power supply, or one
is needed anyway.
• Process monitoring
Measured values, for example from tanks or silos, are transmitted to a higher-level system at regular intervals together
with the device status. SITRANS AW210 is particularly easy to
use with 4-wire devices, as they have an external power
supply.
■ Design
SITRANS AW210 WirelessHART Adapter consists of:
• An enclosure with a fitted aerial
• Electronics
2
1
3
■ Benefits
•
•
•
•
•
•
•
•
•
"Intrinsically safe" or "Explosion proof"
High quality and service life
Extremely rugged enclosure
No additional cabling required with loop power supply
Subsequent integration of an installed field device with HART
interface into maintenance and diagnostic systems if the
control system does not feature the required communication
mechanisms
Proven HART devices can continue to be used for wireless
communication without any limitations
Field devices with a 4 to 20 mA interface (without HART) can
also be connected
Ideal addition to wired communication and to the range of
system solutions in process automation
Burst mode and event notification configuration for the
adapter and connected field devices
6/174
Siemens IK PI · 2015
1 Ground connection
2 Enclosure with potted aerial
3 ½" NPT screw connection
SITRANS AW210 Wireless-HART Adapter, assembly
The enclosure contains the potted electronics and the wireless
module. The aerial is fitted at the top in the enclosure.
On the base of the enclosure is the connector with a ½" NPT female thread. Six cables run from this connector to connect the
adapter.
© Siemens AG 2014
Industrial Wireless Communication
WirelessHART
SITRANS AW210 WirelessHART adapter
■ Function
Parameter assignment
ES
OS
SITRANS AW210 is configured via HART. Configuration can be
carried out using handheld communicator 475 or, more conveniently, with a HART modem and the SIMATIC PDM configuration
software.
MS
Industrial Ethernet
SITRANS
AW210
SIMATIC
system
SITRANS
AW200
SIMATIC ET 200
with HART support
Wireless
HART
Initial startup of the adapter is usually carried out via
SIMATIC PDM and a HART modem or a handheld communicator. During initial startup, the network ID and join key are set in
the adapter. These parameters are used to integrate the adapter
into an existing WirelessHART network.
Following integration into the network, the adapter and
HART devices connected can be conveniently operated via
the WirelessHART network or locally, as detailed above.
Siemens HART field devices for the adapter
In principle, all HART devices certified by the
HART Communication Foundation (HCF) can be operated
with the SITRANS AW210 WirelessHART adapter.
See http://www.siemens.com/automation/service&support
for FAQ with the latest information on connectivity for Siemens
field devices.
IE/WSNPA LINK
Note:
SITRANS SITRANS
P280
TF280
PROFIBUS
SITRANS
AW210
DP/PA
LINK
PROFIBUS PA
SITRANS AW210 WirelessHART Adapter, functional diagram
Siemens has only approved the Siemens HART field devices
listed there for the adapter, and will only provide technical
support for these devices.
Based on HART specifications, it is generally possible to
connect devices that are not listed, however with the following
restrictions:
• All warranties and liability will be excluded
• No technical support
The measured values and diagnostic information from the
connected field devices with HART communication are transmitted to the WirelessHART adapter over wired connections.
The adapter transmits this information as wireless signals to the
IE/WSN-PA link, the Siemens WirelessHART gateway. The
measured values, all parameters and diagnostic information
about the plant network can be accessed from this gateway.
If a field device with a 4 to 20 mA output signal is connected to
the adapter, the current will be converted to a digital measured
value and transmitted on the basis of a measuring range
specified in SITRANS AW210.
Following configuration and integration into a WirelessHART
network, each WirelessHART adapter is able to recognize its
neighbors. It notes the strength of the wireless signal, synchronizes itself, receives network information and then establishes
connections to its neighbors in the wireless network.
A WirelessHART network organizes itself. Manual settings for
organization are not required.
Two-wire and four-wire field devices can be connected to a
WirelessHART adapter. Either up to 2 or up to 8 HART field
devices can be connected to the adapter, depending on the
selected product version. The adapter either has an external
voltage supply or is loop-powered. The WirelessHART adapter
can therefore also be connected in parallel to an existing installation consisting of a voltage supply and a HART field device.
Siemens IK PI · 2015
6/175
6
© Siemens AG 2014
Industrial Wireless Communication
WirelessHART
SITRANS AW210 WirelessHART adapter
■ Technical specifications
Input
Update time for output signals
Point-to-point connection to a HART
field device or
Point-to-point connection to a
4 ... 20 mA field device or
Up to eight HART field devices with
an external voltage supply integrated
using multidrop
Communication
Protocol
Measuring accuracy
• HART communication with multidrop, as primary or secondary
HART master (can be specified)
• 4 ... 20 mA current signal with a
point-to-point connection scaling in
user-defined measuring range in
SITRANS AW210
- Linear
- User-defined scaling with
up to 32 points
Max. measuring error
(4 ... 20 mA circuit)
HART V7
(compatible with previous HART
versions)
• Storage temperature
-40 ... +85 °C (-40 ... +185 °F)
In hazardous areas
up to 75 °C (167 °F)
-40 ... +85 °C (-40 ... +185 °F)
Electromagnetic compatibility
To EN 301 489-17 and EN 300 328-1
Output
Transmission frequency band
1 % of measuring range,
40 … 85 °C (104 … 185 °F)
Rated conditions
Location
Ambient conditions
• Ambient temperature
WirelessHART V7
Weight
2.4 … 2.4835 GHz (ISM band),
16-channel frequency hopping
spread spectrum
Enclosure
• Material
Range (under reference conditions)
Outside up to 235 m (771.00 ft)
RF signal strength
10 dBm
Output signals
• WirelessHART adapter
• HART Cmd 3
Measured current and up to 4 other
dynamic variables (measured
values, derived values) or device
variables
• HART Cmd 9
Up to 8 dynamic variables with
status
• HART Cmd 48
Additional status information
• 4 ... 20 mA field device
Scaled or linearized process values
• HART field device
• HART Cmd 3
Measured current and up to 4 other
dynamic variables (measured
values, derived values) or device
variables
• HART Cmd 9
Up to 8 dynamic variables with
status
• HART Cmd 48
Additional status information
6/176
The possible settings are:
• 1, 2, 4, 8, 16, 32 s
• 1, 2, 5, 10, 30, 60 min
(times also depend on the gateway)
Outside/inside
Design
Communication
6
You can set the update times
separately for the adapter and the
connected devices.
Siemens IK PI · 2015
0.46 kg (1.01 lb)
• Cable entry
Enclosure:
Aluminum alloy, RoHS-compliant
polyurethane corrosion-resistant
coating
Cap:
Resin
½" NPT female thread
Degree of protection
IP68
Aerial
Potted in enclosure
Auxiliary power
Power supply
Loop power 1 … DC 2.5 V,
can be set by user
in 0.5 V DC increments
Loop-powered, operating current
DC 3.2 … 25 mA operating current;
overvoltage, surge and reverse
polarity protection
Certificates and approvals
Wireless communication approvals
• CE (R&TTE, EMC)
• FCC Part 15.247 for wireless
applications in the 2.4 GHz transmission frequency band
• IC
© Siemens AG 2014
Industrial Wireless Communication
WirelessHART
SITRANS AW210 WirelessHART adapter
■ Technical specifications (continued)
Explosion protection
■ Ordering data
Configuration
Intrinsic safe "i" gases and vapors
II 1G Ex ia IIC T*; IP68
T* = T5 for Ta = -40 ... +85 °C
T* = T6 for Ta = -40 ... +75 °C
SITRANS AW210
Adapter for WirelessHART
Communication
Intrinsic safe dust
II 1 D Ex iaD 20 IP68 T95C;
Ta = -40 ... +85 °C
Non-sparking (zone 2)
II 3 G Ex nA nC IIC T* Gc; IP68
T* = T5 for Ta = -40 ... +85 °C
T* = T6 for Ta = -40 ... +75 °C
WirelessHART-Adapter AW210
with 4 ... 20 mAor HART-interface
Explosion protection to FM for US
Intrinsic safe, Non-sparking
Explosion protection to FM for CA
Intrinsic safe, Non-sparking
Article No.
IS/I,II,III/1/ABCDEFG/
T5 Ta = -40 ... +85 °C,
T6 Ta = -40 ... +75 °C
NI/I/2/ABCD/
T5 Ta = -40 ... +85 °C,
T6 Ta = -40 ... +75 °C
S/II,III/2/EFG/
T5 Ta = -40 ... +85 °C,
T6 Ta = -40 ... +75 °C
I/0/AEx ia/IIC/
T5 Ta = -40 ... +85 °C
T6 Ta = -40 ... +75 °C;
20/AEx iaD/T95°C;
Ta = -40 ... 85°C
I/2/AEx nA nC/IIC/
T5 Ta = -40 ... +85 °C,
T6 Ta = -40 ... +75 °C; IP68
7MP3111 - 7 7 7 7 0 - 0 A A 0
• 2 devices
1
• 8 devices
2
Auxiliary power
Loop powered or 24 VDC (external)
A
Certificates and approvals
Intrinsically safe gas, vapors and
dust (ATEX), Intrinsic Safe (FM)
B
Explosionproof gas, vapour and
dust (ATEX), Explosionproof (FM)
C
Enclosure
Aluminum
0
IS/I,II,III/1/ABCDEFG/
T5 Ta = -40 ... +85 °C
T6 Ta = -40 ... +75 °C;
NI/I/2/ABCD/
T5 Ta = -40 ... +85 °C
T6 Ta = -40 ... +75 °C;
S/II,III/2/EFG/
T5 Ta = -40 ... +85 °C
T6 Ta = -40 ... +75 °C;
I/0/Ex ia/IIC/
T5 Ta = -40 ... +85 °C
T6 Ta = -40 ... +75 °C;
I/2/Ex nA nC/IIC/
T5 Ta = -40 ... +85 °C
T6 Ta = -40 ... +75 °C
II/1/EFG Ta = -40 ... +85°C; IP68
Flameproof gases and vapors
II 2 G Ex d IIC T* Gb; IP68
T* = T5 for Ta = -40 ... +85 °C
T* = T6 for Ta = -40 ... +75 °C
Protection by enclosure dust
II 2 D Ex tb IIIC T95°C
Ta = -40 ... +85°C; IP68
6
XP/I/1/ABCD
Explosion protection to FM for US
Explosionproof, flameproof, gas, dust I/1 AEx d IIC T5, T6 Gb
DIP/II,III/1/EFG
21/AEx tb IIIC T95°C
T5 Ta = -40 ... +85°C,
T6 Ta = -40 ... +75°C
Type 6P, IP68
XP/I/1/ABCD
Explosion protection to FM for CA
Explosionproof, flameproof, gas, dust I/1 Ex d IIC T5, T6 Gb
DIP/II,III/1/EFG
T5 Ta = -40 ... +85°C,
T6 Ta = -40 ... +75°C
Note:
Circuit diagrams and dimensional drawings can be found in
Catalog FI 01.
Siemens IK PI · 2015
6/177
© Siemens AG 2014
Industrial Wireless Communication
WirelessHART
IE/WSN-PA LINK
■ Overview
■ Application
The IE/WSN-PA LINK connects wireless HART field devices by
radio to the Ethernet. On the radio side, the IE/WSN-PA LINK
supports the WirelessHART standard and on the Ethernet side
the TCP/IP and Modbus TCP communication.
The IE/WSN-PA LINK thus enables wireless diagnostics,
maintenance and process monitoring.
Monitoring
WirelessHART is particularly suitable for use in plant sections
that are to be included in monitoring, but which do not have any
existing MSR cabling, e.g. external tank stores or other installations where high cabling costs are anticipated. Data for the
visualization can be retrieved from the IE/WSN-PA link via
Industrial Ethernet or Modbus TCP.
ES
Note:
A general introduction to WirelessHART and information
on the WirelessHART adapter and the WirelessHART field
devices can be found in Catalog FI 01 or on the Internet at
http://www.siemens.com/wirelesshart
MS
Industrial Ethernet
SIMATIC
system
SITRANS
AW200
SIMATIC ET 200
with HART support
Wireless
HART
IE/WSNPA LINK
■ Benefits
DP/PA
LINK
• Extended possible solutions for connecting process industry
field devices by means of alternative or supplementary
WirelessHART communication
• Reliable data transmission using intermeshed network
technology; the self-organizing network with alternative paths
enables radio obstacles to be bypassed
• Reduction of cabling costs under difficult installation conditions, e.g. if the field devices are located on inaccessible plant
components or are only required temporarily
• To improve process monitoring and for maintenance tasks,
sensors can be retrofitted
• Existing transmitters can be integrated wirelessly into maintenance and diagnostics systems by means of WirelessHART
adapters
• Without additional software, restricted monitoring is possible
via web services and the integrated web server of the
IE/WSN-PA LINK.
6/178
Siemens IK PI · 2015
SITRANS SITRANS
P280
TF280
PROFIBUS
6
• The IE/WSN-PA LINK is a network transition for the connection
of WirelessHART field devices (HART V7.1) to Industrial
Ethernet, as an alternative or supplement to the wired
connection.
• Connection of up to 100 WirelessHART devices
• Approved for operation in hazardous areas in Zone 2
• Open TCP/IP communication and Modbus TCP via the
Ethernet interface
• Can be used with HART-OPC servers of the HART Communication Foundation
OS
PROFIBUS PA
Monitoring of process states via WirelessHART
© Siemens AG 2014
Industrial Wireless Communication
WirelessHART
IE/WSN-PA LINK
■ Application (continued)
■ Design
Retrofitting for diagnostics and maintenance
For this application, wireless adapters are looped into the
4-20 mA interface or screwed directly onto the HART device.
The acyclic HART message frames are transmitted by radio
between IE/WSN-PA LINK and a wireless adapter. Without
affecting the operation of the plant, the wireless adapter
modulates the acyclic HART message frames to the 4-20 mA
interface or extracts them from the 4-20 mA interface.
The IE/WSN-PA LINK collects the data of all wireless adapters
and transfers it via Industrial Ethernet to the diagnostics and
maintenance station.
If greater distances between the IE/WSN-PA LINK and the
monitoring station are to be spanned without cabling, this can be
implemented by means of Industrial Wireless LAN with the
access points and client modules of the SCALANCE W family.
SITRANS
MDS
• 2 x 10/100/1 000 Mbit/s RJ45 ports, electrical (no integral
switch; interfaces can be used, for example, for continuous
connection to the plant network as well as the temporary
connection of a PC)
• 1 x screw terminal for connection to Modbus RTU via RS485
• 1 x screw terminal for the 24 V DC connection
• Rugged metal enclosure with IP65 protection for use
outdoors, also in hazardous zone 2
• Mounting: wall or mast mounting (vertical);
U-bolts for mast mounting are included in the scope of
delivery.
Product versions
• With integral, non-detachable antenna
• Redundancy function and with N connector for connection of
an external antenna
■ Function
OS
WirelessHART
The IE/WSN-PA LINK establishes on the radio side an intermeshed wireless sensor network for communication with wireless field devices (e.g. transmitters). The data from the wireless
field devices is received by the IE/WSN-PA LINK and transmitted
via Industrial Ethernet to the connected systems. The supported
wireless network is an open wireless network specified by the
HART Communication Foundation (HCF) in accordance with the
WirelessHART (HART V7.1) standard.
Industrial Ethernet
Controller without
HART support
SITRANS
AW200
4 –20 mA
On the field device side, the IE/WSN-PA LINK requires field
devices that support WirelessHART (HART). Existing field devices can be integrated by means of wireless adapters into the
WirelessHART communication. To this end, the adapters are
looped into the 4-20 mA interface. In addition, as many as four
standard HART field devices with external power supply can be
connected to the adapter in multidrop mode. Individually connected devices can be operated with the battery of the adapter.
IEEE 802.11
4 –20 mA
Wireless
HART
The adapter wirelessly transmits all data and process values of
the connected devices. The advantage of this solution is that
tried and tested devices can continue to be used.
Industrial
Ethernet
Remote I/O station
w/o HART support
Retrofitting of plants for diagnostics and maintenance
G_IK10_XX_30348
IE/WSNPA LINK
PROFIBUS
4 –20 mA
Industrial Ethernet
Via the Ethernet interface the IE/WSN-PA LINK supports the use
of the HART OPC server and the Modbus TCP protocol.
Configuration
The configuration is web-based, without additional software, and
performed from the PC. By means of the web user interface it is
also possible to display the device states and measured values
of the WirelessHART devices.
Siemens IK PI · 2015
6/179
6
© Siemens AG 2014
Industrial Wireless Communication
WirelessHART
IE/WSN-PA LINK
■ Function (continued)
For increased availability requirements, the link can be used redundantly. The redundancy function is only available for the device variant with a connection for an external antenna.
Two links are connected to the same Ethernet subnet via a
switch to provide the redundancy. The two links are connected
to each other via an Ethernet cable (management coupling).
One of the two links is configured as the active device. It carries
out the communication between the control center and the
WirelessHART wireless network under normal conditions. The
second link is configured identically. It is used as a standby
device. In a redundancy scenario, the standby device becomes
the active device.
SITRANS
P280
Control center
SITRANS
P280
P2
WirelessHart
SITRANS
TF280
SITRANS
TF280
SITRANS
AW200
6
SITRANS
TF280
IE/WSN-PA
LINK
P1
P2
IE/WSN-PA
LINK
P1
SCALANCE
X208
WirelessHART – Wireless connection
Industrial Ethernet
SITRANS
AW200
Management – Coupling between redundant
gateways
G_IK10_XX_30298
Increased availability of WirelessHART application
due to redundancy mode
WirelessHART network operated with a redundant gateway
■ Integration
Integration into automation systems
Integration in PCS 7
The IE/WSN-PA LINK can be integrated into automation systems
via Ethernet or Modbus TCP. Communication modules
(CP 343-1 or CP 443-1) are required to connect the
IE/WSN-PA LINK to SIMATIC S7-300/400. Function blocks
and technical support can be found at:
www.siemens.com/simatic-net/ik-info
For integration of the IE/WSN-PA LINK into PCS 7 you can obtain
function blocks and technical support at:
www.siemens.com/simatic-net/ik-info
6/180
Siemens IK PI · 2015
© Siemens AG 2014
Industrial Wireless Communication
WirelessHART
IE/WSN-PA LINK
■ Technical specifications
Article No.
6GK1411-6CA40-0AA0
6GK1411-6CA40-0BA0
Product-type designation
IE/WSN-PA LINK
IE/WSN-PA LINK
Transfer rate
• at the interface 1
• at the interface 2
• at interface 3
10 … 100 Mbit/s
10 … 100 Mbit/s
9.6 … 57.6 kbit/s
10 … 100 Mbit/s
10 … 100 Mbit/s
9.6 … 57.6 kbit/s
1
1
1
1
1
1
1
1
RJ 45 port
RJ 45 port
RJ 45 port
RJ 45 port
2-pole terminal strip
2-pole terminal strip
3-pole terminal strip
3-pole terminal strip
Number of radio cards permanently
installed
1
1
Number of internal antennas
1
0
Number of electrical connections
for external antenna(s)
0
1
Design of the electrical connection
for external antenna(s)
-
N-Connector
Type of voltage supply
DC
DC
Supply voltage external
• minimum
• maximum
24 V
20 V
28 V
24 V
20 V
28 V
Consumed current from external
supply voltage at 24 V with DC
maximum
0.5 A
0.5 A
Active power loss maximum
12 W
12 W
-40 … +70 °C
-40 … +85 °C
-40 … +85 °C
-40 … +70 °C
-40 … +85 °C
-40 … +85 °C
Relative humidity at 25 °C without
condensation during operating
maximum
90 %
90 %
Protection class IP
IP 65
IP 65
Width of the housing
229 mm
229 mm
Height of the enclosure
• without antenna
• with antenna
306 mm
354 mm
306 mm
354 mm
Depth of the housing
89 mm
89 mm
Net weight
4.54 kg
4.54 kg
Mounting type
• wall mounting
• mast mounting
Yes
Yes
Yes
Yes
Mounting type
Material for mast mounting included in scope of delivery
Material for mast mounting included in scope of delivery
Interfaces
Number of electrical connections
• at interface 1 in accordance
with Industrial Ethernet
• at interface 2 in accordance
with Industrial Ethernet
• at interface 3 in accordance
with RS 485
• for power supply
Design of electrical connection
• at interface 1 in accordance
with Industrial Ethernet
• at interface 2 in accordance
with Industrial Ethernet
• at interface 3 in accordance
with RS 485
• for power supply
Interfaces wireless
6
Supply voltage,
current consumption, power loss
Permitted ambient conditions
Ambient temperature
• during operating
• during storage
• during transport
Design, dimensions and weight
Siemens IK PI · 2015
6/181
© Siemens AG 2014
Industrial Wireless Communication
WirelessHART
IE/WSN-PA LINK
■ Technical specifications (continued)
Article No.
6GK1411-6CA40-0AA0
6GK1411-6CA40-0BA0
Product-type designation
IE/WSN-PA LINK
IE/WSN-PA LINK
2.4 GHz
2.5 GHz
2.4 GHz
2.5 GHz
100
100
10 s
10 s
5s
5s
Transmission link between two
devices for WirelessHART network
• maximum
• note
100 m
Values may vary in the case of radio obstacles
100 m
Values may vary in the case of radio obstacles
Protocol is supported HARD
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Product function
• Password protection - multi-level
• WirelessHART Join Key
• ACL - MAC-based
• WirelessHART Network ID
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Protocol is supported SSL
Yes
Yes
Principle of encryption
AES 128 bit
AES 128 bit
Yes
Yes
Wireless frequencies
Radio frequency for WirelessHART
in 2.4 GHz frequency band
• initial value
• end value
Performance data WirelessHART
Number of WirelessHART devices
can be operated
Network latency
• for 100 field devicesfor
WirelessHART network maximum
• for 50 field devices for
WirelessHART network maximum
Product properties, functions,
components general
6
Protocol is supported
• Address Resolution Protocol (ARP)
• HTTP
• HTTPS
• Modbus TCP
• Modbus TCP secure
• Modbus RTU
Product functions management,
configuration
Product function
• web-based management
• DHCP client
Product functions Diagnosis
Product function
• Web-based diagnostics
• WirelessHART diagnostics
via Modbus
Product functions Redundancy
Product function device redundancy
Product functions Security
Product functions Time
Protocol is supported NTP
6/182
Siemens IK PI · 2015
© Siemens AG 2014
Industrial Wireless Communication
WirelessHART
IE/WSN-PA LINK
■ Technical specifications (continued)
Article No.
6GK1411-6CA40-0AA0
6GK1411-6CA40-0BA0
Product-type designation
IE/WSN-PA LINK
IE/WSN-PA LINK
HART V 7.1
HART V 7.1
Standards, specifications,
approvals
Standard for WirelessHART
Standard for wireless communication Yes
IEEE 802.15.4
Verification of suitability
• CE mark
• concerning CSA
Yes
• regarding NEMA
Yes
CSA Division 2 & Dust Ignition-proof for Class I, Division 2,
Groups A, B, C, and D. Dust Ignition-proof for Class II,
Groups E, F, and G / Suitable for Class III Hazardous
Locations. / Install per Siemens drawing A5E02467236A.
Temperature Code: T4 (-40°C < Ta < 60°C) CSA Enclosure
Type 4X
FM Division 2, Non-Incendive for Class I, Division 2, Groups
A, B, C, and D. Dust Ignition-proof for Class II, III, Division
1, Groups E, F, and G / Indoor and outdoor locations /
NEMA Type 4X Temperature Code: T4 (-40°C < Ta < 60°C)
ATEX type n, see note: certificate number:
Baseefa10ATEX0044X, ATEX marking: Ex II 3 G,
Ex nA nL IIC T4 (-40°C <= Ta <= 60°C), rated voltage: 28 V,
ATEX dust ignition-proof: certificate number:
Baseefa10ATEX0045X, ATEX marking:
II 3D, Ex tD A22 IP66 T135 (-40°C <= Ta <= 60°C),
rated voltage: 28 V. Note on type n: conditions for safe
handling during installation. The device does not pass the
500 V insulation test in accordance with paragraph 6.8.1 of
EN 60079-15:2005. This must be taken into account when
the device is mounted
IECEx type n, see note: certificate number:
IECEx BAS 10.0014X, Ex nA nL IIC T4 (-40°C <= Ta <=
60°C), rated voltage: 28 V, IECEx dust ignition-proof,
see note: certificate number: IECEx BAS 10.0015X,
Ex tD A22 IP66 T135 (-40°C <= Ta <= 60°C),
rated voltage: 28 V. Note on type n: conditions for safe
handling during installation. The device does not pass the
500 V insulation test in accordance with paragraph 6.8.1 of
EN 60079-15:2005. This must be taken into account when
the device is mounted.
-
Yes
CSA Division 2 & Dust Ignition-proof for Class I, Division 2,
Groups A, B, C, and D. Dust Ignition-proof for Class II,
Groups E, F, and G / Suitable for Class III Hazardous
Locations. / Install per Siemens drawing A5E02467236A.
Temperature Code: T4 (-40°C < Ta < 60°C) CSA Enclosure
Type 4X
FM Division 2, Non-Incendive for Class I, Division 2, Groups
A, B, C, and D. Dust Ignition-proof for Class II, III, Division
1, Groups E, F, and G / Indoor and outdoor locations /
NEMA Type 4X Temperature Code: T4 (-40°C < Ta < 60°C)
ATEX type n, see note: certificate number:
Baseefa10ATEX0044X, ATEX marking: Ex II 3 G,
Ex nA nL IIC T4 (-40°C <= Ta <= 60°C), rated voltage: 28 V,
ATEX dust ignition-proof: certificate number:
Baseefa10ATEX0045X, ATEX marking:
II 3D, Ex tD A22 IP66 T135 (-40°C <= Ta <= 60°C),
rated voltage: 28 V. Note on type n: conditions for safe
handling during installation. The device does not pass the
500 V insulation test in accordance with paragraph 6.8.1 of
EN 60079-15:2005. This must be taken into account when
the device is mounted.
IECEx type n, see note: certificate number:
IECEx BAS 10.0014X, Ex nA nL IIC T4 (-40°C <= Ta <=
60°C), rated voltage: 28 V, IECEx dust ignition-proof,
see note: certificate number: IECEx BAS 10.0015X,
Ex tD A22 IP66 T135 (-40°C <= Ta <= 60°C),
rated voltage: 28 V. Note on type n: conditions for safe
handling during installation. The device does not pass the
500 V insulation test in accordance with paragraph 6.8.1 of
EN 60079-15:2005. This must be taken into account when
the device is mounted.
-
Wireless approval
FCC and IC approval
IC approval
• concerning FM
• concerning ATEX
• regarding IECEx
Siemens IK PI · 2015
6/183
6
© Siemens AG 2014
Industrial Wireless Communication
WirelessHART
IE/WSN-PA LINK
■ Ordering data
Article No.
IE/WSN-PA LINK
Accessories
Gateway between WirelessHART
and Industrial Ethernet;
transmission frequency: 2.4 GHz
• With integral,
non-detachable antenna
• N connector for connection
of external antennas
IE FC M12 Plug PRO
6GK1411-6CA40-0AA0
6GK1411-6CA40-0BA0
Antennas
Wall or mast-mounting
• Antenna ANT792-6MN
Antenna gain including
N-Connect connector 6 dBi,
2.4 GHz
Roof mounting
• ANT795-6MN antenna
Antenna gain
incl. N-Connect connector
6/8 dBi, 2.4/5 GHz
• Antenna mounting tool
(ANT795-6MN)
Mounting tool for installation of
ANT795-6MN under a roof
M12 plug-in connector suitable
for on-site assembly (D-coded,
IP65/IP67), metal housing,
FastConnect connection system,
for connecting HARTING adapter
cables to the Industrial Ethernet
• 1 unit
IE FC TP Standard Cable GP 2 x 2
(Type A)
Antennas with omni-directional
characteristics;
country permits,
compact instructions (hard copy),
German/English
6GK5792-6MN00-0AA6
6XV1840-2AH10
4-core, shielded TP installation
cable for connection to IE
FC Outlet RJ45/IE FC RJ45 Plug;
PROFINET-compatible;
with UL approval;
sold by the meter;
max. length 1 000 m,
minimum order quantity 20 m
IE FC Stripping Tool
6GK5795-6MN00-0AA6
6GK1901-0DB20-6AA0
6GK1901-1GA00
Preadjusted stripping tool
for fast stripping of the Industrial
Ethernet FC cables
Network components for IWLAN
see "Industrial Wireless
Communication"
21036836420
Lightning protector
with N/N female/female connector,
IP65 (-40 to +100 °C)
HARTING adapter cable 1)
M12 female NPT 1/2 thread to
RJ45 11cm, (minimum order
quantity: 10);
The adapter is provided for
easy connection of the link to the
Industrial Ethernet;
Antenna cables
SITOP compact 24 V/ 0.6 A
6EP1331-5BA00
IWLAN N-Connect male/male
flexible connection cable
1-phase power supply
with wide-range input
85 – 264 V AC/110 – 300 V DC,
stabilized output voltage 24 V,
rated output current value 0.6 A,
slim design
LP798-1N Lightning Protector
6
Article No.
6GK5795-6MN01-0AA6
6GK5798-2LP00-2AA6
Flexible connecting cable
for connecting an external antenna;
assembled with two N-Connect
male connectors
•1m
•2m
•5m
• 10 m
6XV1875-5AH10
6XV1875-5AH20
6XV1875-5AH50
6XV1875-5AN10
HF coupling
6GK5798-0CP00-1AA0
Not included in the scope of
delivery of the IE/WSN-PA link;
You can find ordering information
on the Internet at:
http://www.harting.com/en/contact/
N-Connect male/male connector
for connecting the LP798-1N
lightning protector
1)
■ More information
Current approvals can be found on the Internet at:
http://support.automation.siemens.com/WW/view/en/46374734
6/184
Siemens IK PI · 2015
When using the Harting adapter cable for the Ethernet connection,
the requirements for intrinsic safety approval are not applicable.
When used in an application relevant to intrinsic safety guidelines,
it requires acceptance by the appropriate approval agency.