A&D UA-767F Instruction manual

Digital Blood Pressure Monitor
Model UA-767F
Instruction Manual
Original
Manuel d’instructions
Traduction
Manual de Instrucciones
Traducción
Manuale di Istruzioni
Traduzione
使用手冊
翻譯
1WMPD4002780E
Contents
Dear Customers.................................................................... 2
Preliminary Remarks ............................................................. 2
Precautions........................................................................... 2
Parts Identification................................................................ 4
Symbols................................................................................ 5
Operation Mode.................................................................... 7
Using the Monitor ................................................................. 9
Installing / Changing the Batteries ................................... 9
Connecting the Air Hose ................................................ 10
Connecting the AC Adapter............................................ 10
Adjusting the Built-in Clock ........................................... 11
Selecting the Correct Cuff Size ....................................... 12
Applying the Arm Cuff ................................................... 12
How to Take Accurate Measurements............................. 14
Measurement ................................................................. 14
After Measurement ........................................................ 14
Measurements .................................................................... 15
Normal Measurement..................................................... 15
Measurement with the Desired Systolic Pressure ............ 16
Notes for Accurate Measurement ................................... 16
Recalling the Memory Data ................................................. 17
What is an Irregular Heartbeat............................................. 19
%IHB .................................................................................. 19
Pressure Bar Indicator ......................................................... 20
WHO Classification Indicator ............................................... 20
About Blood Pressure.......................................................... 21
What is Blood Pressure? ................................................. 21
What is Hypertension and How is it Controlled?.............. 21
Why Measure Blood Pressure at Home?........................... 21
WHO Blood Pressure Classification ................................. 21
Blood Pressure Variations............................................... 21
Troubleshooting ................................................................. 22
Maintenance ....................................................................... 23
Technical Data .................................................................... 23
English 1
Dear Customers
Congratulations on purchasing a state-of-the-art A&D blood pressure
monitor, one of the most advanced monitors available today. Designed
for ease of use and accuracy, this monitor will facilitate your daily blood
pressure regimen.
We recommend that you read through this manual carefully before
using the device for the first time.
Preliminary Remarks
This device conforms to the European Directive 93/42 EEC for Medical
mark of conformity. (0123:
Products. This is made evident by the
The reference number to the involved notified body)
The device is designed for use on adults only, not newborns or infants.
Environment for use. The device is for use in the home healthcare
environment.
This device is designed to measure blood pressure and pulse rate of
people for diagnosis.
Precautions
Precision components are used in the construction of this device.
Extremes in temperature, humidity, direct sunlight, shock or dust should
be avoided.
Clean the device and cuff with a dry, soft cloth or a cloth dampened with
water and a neutral detergent. Never use alcohol, benzene, thinner or
other harsh chemicals to clean the device or cuff.
Avoid tightly folding the cuff or storing the hose tightly twisted for long
periods, as such treatment may shorten the life of the components.
Take care to avoid accidental strangulation of babies or infants with the
hose.
Do not twist the air hose during measurement. This may cause injury
due to continuous cuff pressure.
The device and cuff are not water resistant. Prevent rain, sweat and
water from soiling the device and cuff.
Measurements may be distorted if the device is used close to televisions,
microwave ovens, cellular telephones, X-ray or other devices with strong
electrical fields.
English 2
When reusing the device, confirm that the device is clean.
Used equipment, parts and batteries are not treated as ordinary
household waste, and must be disposed of according to the applicable
local regulations.
When the AC adapter is used, make sure that the AC adapter can be
readily removed from the electrical outlet when necessary.
Do not modify the device. It may cause accidents or damage to the device.
To measure blood pressure, the arm must be squeezed by the cuff hard
enough to temporarily stop blood flow through the artery. This may cause
pain, numbness or a temporary red mark to the arm. This condition will
appear especially when measurement is repeated successively. Any pain,
numbness, or red marks will disappear with time.
Measuring blood pressure too frequently may cause harm due to blood
flow interference. Check that the operation of the device does not result in
prolonged impairment of blood circulation, when using the device
repeatedly.
If you have had a mastectomy, please consult a doctor before using the
device.
Do not let children use the device by themselves and do not use the
device in a place within the reach of infants.
There are small parts that may cause a choking hazard if swallowed by
mistake by infants.
Contraindications
The following are precautions for proper use of the device.
Do not apply the cuff on an arm with another medical electrical
equipment attached. The equipment may not function properly.
People who have a severe circulatory deficit in the arm must consult a
doctor before using the device, to avoid medical problems.
Do not self-diagnose the measurement results and start treatment by
yourself. Always consult your doctor for evaluation of the results and
treatment.
Do not apply the cuff on an arm with an unhealed wound.
Do not apply the cuff on an arm receiving an intravenous drip or blood
transfusion. It may cause injury or accidents.
Do not use the device where flammable gases such as anesthetic gases
are present. It may cause an explosion.
Do not use the device in highly concentrated oxygen environments, such
as a high-pressure oxygen chamber or an oxygen tent. It may cause a
fire or explosion.
English 3
Parts Identification
Button
Button
SET Button
AC adapter plug
DC Jack
Air Connector Plug
START Button
Air Socket
Display
Air Hose
Proper Fit Range
Artery Position Mark
Index Mark
Arm Cuff
Battery Compartment
Battery Cover
1.5V Batteries
(R6P, LR6 or AA)
Display
Average
MEMORY
I.H.B. Symbol
(Irregular heartbeat symbol)
Systolic
Pressure
%IHB
Cuff Fit Error Symbol
Diastolic
Pressure
Movement Error Symbol
Heart Mark
WHO Classification Indicator
and Pressure Bar Indicator
Pulse Rate
Date &
Clock Display
Battery Indicator
AM / PM Mark
User
English 4
Symbols
Symbols that are printed on the device case
Symbols
Function / Meaning
Standby and Turn the device on.
SYS.
Systolic blood pressure in mmHg
DIA.
Diastolic blood pressure in mmHg
PUL.
Pulse per minute
Battery installation guide
Direct current
Type BF: Device, cuff and tubing are designed to provide
special protection against electrical shocks.
IP
SN
EC directive medical device label
EU-representative
Manufacturer
Date of manufacture
International protection symbol
Class II device
WEEE label
Serial number
Refer to instruction manual/booklet
Polarity of DC jack
Symbols that appear on the display
Symbols
Function / Meaning
Appears while measurement is in
progress. It blinks when the pulse is
detected.
Irregular Heartbeat symbol (I.H.B.)
Appears when an irregular heartbeat
is detected.
It may light when a very slight vibration
like shivering or shaking is detected.
Appears when a body or arm
movement is detected.
English 5
Recommended Action
Measurement is in
progress. Remain as
still as possible.
The reading may yield
an incorrect value. Take
another measurement.
Remain still during
measurement.
Symbols
Symbols
Function / Meaning
Appears during measurement when
the cuff is attached loosely
Recommended Action
The reading may yield an
incorrect value. Apply the
cuff correctly, and take
another measurement.
Detected rate of IHB in memory
Number of detected
IHBs in memory
x 100 [%]
%IHB =
Total number
User
Previous measurements stored in memory.
Average data
Full Battery
Low Battery
The battery power indicator during
measurement.
The battery is low when it blinks.
Unstable blood pressure due to
movement during measurement.
Replace all batteries with new
ones when the mark blinks.
Take another measurement.
Remain very still during
measurement.
The systolic and diastolic values are
within 10 mmHg of each other.
The pressure value did not increase Apply the cuff correctly,
during the inflation.
and take another
The cuff is not applied correctly.
measurement.
PUL. DISPLAY ERROR
AM
PM
The pulse is not detected correctly.
Remove the batteries and
press the START button,
Blood pressure monitor internal error and then install the batteries
again. If the error still
appears, contact the dealer.
Data taken between 4:00 and 9:59
Data taken between 18:00 and 1:59
English 6
Operation Mode
1. Normal Measurement
Press the START button. Blood pressure is measured and the data is
stored in memory. This device can store the last 60 measurements for each
of the four users in memory.
2. Recalling the Data
Press the
or
button to recall the data in
memory. The average of all measurements is
displayed, as indicated in the figure at the right.
Then, each time the
button is pressed, the
memory data is displayed as follows.
Most recent data (No.n, in the example, No.35)
Last data (No.1)
For details on recalling the data, refer to “Recalling
the Memory Data”.
3. Changing user for memory display
Press the SET button while a memory is displayed.
The user is changed, and the average of
measurement values for that user is displayed.
English 7
Operation Mode
4. Deleting Data Stored in Memory
In standby, press both the
and buttons. The
mark,
battery indicator and user mark will appear. When you
would like to delete the memory data of the currently
displayed user, press and hold both the
and buttons
until the illuminated
mark starts blinking.
5. Measurement with the Desired Systolic Pressure
Refer to page 16 for measurement with the desired systolic pressure.
6. User Selection
Press the SET button before measuring blood pressure to select a user
from 1 to 4.
In standby, press the SET button.
Each time the SET button is pressed, the user changes.
Press the START button to set to the currently
displayed user.
English 8
Using the Monitor
Installing / Changing the Batteries
1. Remove the battery cover.
2. Remove the used batteries and
insert new batteries into the battery
compartment as shown, taking
care that the polarities (+ and -) are
correct.
Use only R6P, LR6 or AA batteries.
3. Attach the battery cover.
Step 1
Step 3
Step 1
Step 2
CAUTION
Insert the batteries as shown in the battery compartment. If installed
incorrectly, the device will not work.
When
(LOW BATTERY mark) blinks on the display, replace all batteries
with new ones. Do not mix old and new batteries. It may shorten the battery
life, or cause the device to malfunction.
Replace the batteries two seconds or more after the device turns off.
If
(LOW BATTERY mark) appears even after the batteries are replaced,
make a blood pressure measurement. The device may then recognize the new
batteries.
(LOW BATTERY mark) does not appear when the batteries are drained.
The battery life varies with the ambient temperature and may be shorter at
low temperatures. Generally, four new LR6 batteries will last approximately
for one year when used twice for measurement each day.
Use the specified batteries only.
Remove the batteries if the device is not to be used for a long time.
The batteries may leak and cause a malfunction.
English 9
Using the Monitor
Air socket
Connecting the Air Hose
Insert the air connector plug into
the air socket firmly.
Air connector plug
Connecting the AC Adapter
Insert the AC adapter plug into the DC
jack.
Next, connect the AC adapter to an
electrical outlet.
DC jack
AC adapter plug
Use the specified AC adapter.
(Refer to page 24.)
When disconnecting the AC adapter from the electrical outlet, grasp
and pull the AC adapter body out of the outlet.
When disconnecting the AC adapter plug from the blood pressure
monitor, grasp and pull the AC adapter plug out of the monitor.
English 10
Using the Monitor
Adjusting the Built-in Clock
Press and hold
Adjust the clock prior to use.
1. Press and hold the SET button until the
year starts blinking.
or button.
2. Select the year using the
Press the SET button to set the current
year and move to month/day selection. The
date can be set anywhere between the years
2013 and 2059.
3. Select the month using the
or button.
Press the SET button to set the current
month and move to day selection.
4. Select the day using the
or button.
Press the SET button to set the current day
and move to hour/minute selection.
5. Select the hour using the
or button.
Press the SET button to set the current
hour and move to minute selection.
6. Select the minute using the
or button.
Press the START or SET button to turn the
device off.
Holding down the
or
button will
change the value continuously.
Note: After three minutes of non-operation, the
device will turn off automatically.
When the clock has not been
set, the clock display indicates
dashes as shown to the right.
English 11
or
Year
or
Month
or
Day
or
Hour
or
Minute
START
or
Turn off
Pressing the START
button will turn the
device off anytime.
Using the Monitor
Selecting the Correct Cuff Size
Using the correct cuff size is important for an accurate reading. If the cuff is
not the proper size, the reading may yield an incorrect blood pressure value.
The arm size is printed on each cuff.
The index
and proper fit range, on the cuff, tell you if you are applying the
correct cuff. (Refer to "Symbols that are printed on the cuff" on the next page)
If the index
points outside of the range, contact your local dealer to
purchase a replacement cuff.
The arm cuff is a consumable. If it becomes worn, purchase a new one.
Arm Size
Recommended Cuff Size
Catalog Number
31 cm to 45 cm
Large Adult Cuff
CUF-F-LA
22 cm to 42 cm
Wide Range Cuff
CUF-I
22 cm to 32 cm
Adult Cuff
CUF-F-A
Arm size: The circumference at the biceps.
Note:
Model UA-767F is not designed for using a small cuff.
Applying the Arm Cuff
1. Wrap the cuff around the upper arm,
about 1-2 cm above the inside of the
elbow, as shown.
Place the cuff directly against the
skin, as clothing may cause a faint
pulse, and result in a measurement
error.
Do not roll up shirtsleeve tightly.
Cuff
Air Hose
Artery position mark
2. Constriction of the upper arm,
caused by tightly rolling up a
shirtsleeve, may prevent accurate
readings.
3. Confirm that the index
within the proper fit range.
1-2 cm
Secure the fabric
fastener firmly.
points
Index
English 12
and proper fit range
Using the Monitor
Symbols that are printed on the cuff
Symbols
Function / Meaning
Recommended Action
Set the
mark on the
artery of the upper arm or
in line with the ring finger
on the inside of the arm.
Artery position mark
▲
REF
Index
Catalog number
Proper fit range for the adult cuff.
It's printed on the adult cuff.
Range to use the large adult cuff.
Over range printed on the adult cuff
and wide range cuff.
Proper fit range for the wide range cuff.
It's printed on the wide range cuff.
Proper fit range for the large adult cuff.
It's printed on the large adult cuff.
Under range printed on the adult cuff
and wide range cuff.
Range to use the adult cuff.
It's printed on the large adult cuff.
Use the large adult cuff
instead of the adult cuff or
wide range cuff.
Use the adult cuff instead
of the large adult cuff.
Lot number
Large adult cuff
Proper fit range
A
L
Wide range cuff
S
W
L
A
L
Adult cuff
S
English 13
Using the Monitor
How to Take Accurate Measurements
For the most accurate blood pressure measurement:
Sit comfortably on a chair. Rest your arm on the table. Do not cross your
legs. Keep your feet on the floor and straighten your back.
Relax for about five to ten minutes before measurement.
Place the center of the cuff at the same height as your heart.
Remain still and keep quiet during measurement.
Do not measure right after physical exercise or a bath. Rest for twenty or
thirty minutes before taking the measurement.
Try to measure your blood pressure at the same time every day.
Measurement
During measurement, it is normal for the cuff to feel very tight. (Do not be
alarmed).
After Measurement
After measurement, press the START button to turn the device off. After
one minute of non-operation, the device will turn off automatically.
Remove the cuff and record your data.
Note: Allow at least three minutes between measurements on the same person.
English 14
Measurements
Before measurement, read “Notes for Accurate Measurement” on the next page.
Normal Measurement
1.
Press the SET button to select a user from 1 to 4.
At heart level
Press
2.
START
Place the cuff on the arm (preferably the left arm).
Sit quietly during measurement.
All of the display
3. Press the START button.
segments displayed
All of the display segments are displayed.
Zero (0) is displayed blinking briefly.
The display changes, as indicated in the
figure at the right, as the measurement
Zero display
begins. The cuff starts to inflate. It is
Starts inflation
normal for the cuff to feel very tight. A
pressure bar indicator is displayed, on the
left edge of the display, during the inflation.
Note: If you wish to stop inflation at any time,
press the START button again.
Pressurizing
4. When inflation is complete, deflation starts
(heart mark) blinks,
automatically and
indicating that the measurement is in
progress. Once the pulse is detected, the
mark blinks with each pulse beat.
Note: If an appropriate pressure is not obtained, the
device starts to inflate again automatically.
To avoid re-inflation, see “Measurement
with the Desired Systolic Pressure” on
the next page.
Measurement
5. When the measurement is complete,
in progress
the systolic and diastolic pressure
readings and pulse rate are displayed.
The cuff exhausts the remaining air and
Systolic pressure
deflates completely.
Diastolic pressure
6. When not recording the measurement
WHO classification
or
button.
data, press the
Pulse rate
7. Press the START button to turn the device off.
After one minute of non-operation, the
Exhausts remaining
device will turn off automatically.
air automatically
Note: Allow at least three minutes between
measurements on the same person.
English 15
Measurements
Measurement with the Desired Systolic Pressure
Model UA-767F is designed to detect the pulse and to inflate the cuff to a
systolic pressure level automatically.
Use this method when re-inflation occurs repeatedly or when the results
are not displayed even if the pressure decreases to 20 mmHg or less.
1.
2.
3.
Place the cuff on the arm at heart level
(preferably the left arm).
At heart level
Press and hold the START button until a
number about 30 to 40 mmHg higher than
your expected systolic pressure appears.
Press and hold
the button
When the desired number is reached,
release the START button to start
measurement. Continue to measure
your blood pressure as described on the
previous page.
START
Release the button
at the desired
systolic pressure
Refer to the previous page
for measurement
Notes for Accurate Measurement
Sit down in a comfortable position. Place your arm on a table with your
palm facing upward and the cuff at the same level as your heart.
Relax for about five to ten minutes before taking a measurement. If you
are excited or depressed by emotional stress, the measurement will
reflect this stress as a higher (or lower) than normal blood pressure
reading and the pulse reading will usually be faster than normal.
An individual's blood pressure varies constantly, depending on what you
are doing and what you have eaten. What you drink can have a very
strong and rapid effect on your blood pressure.
This device bases its measurements on the heartbeat. If you have a very
weak or irregular heartbeat, the device may have difficulty determining
your blood pressure.
Should the device detect a condition that is abnormal, it will stop the
measurement and display an error symbol. Refer to page 6 for the
description of symbols.
This blood pressure monitor is intended for use by adults only. Consult
with your physician before using this device on a child. A child should not
use this device unattended.
English 16
Recalling the Memory Data
Note: This device stores the last 60 measurements for each of the four users
in memory.
1. Press the
or button.
Press or
The average of all measurements and
Average systolic
the number of data are displayed.
(If no data, “0” is displayed. Press the
Average diastolic
, or START button to turn the
Average pulse
device off.)
Average of
all the data
button (or the
2. Each time the
button to display the data in the
reverse order) is pressed, the memory
Systolic
data is displayed as follows.
Diastolic
Most recent data (No.n, in the
Pulse
example, No.35)
Three seconds after the data number
Most recent data
display, the measurement data is
displayed.
Last data (No.1)
Three seconds after the data number
display, the measurement data is
displayed.
3. After the last data is displayed, press
the
button to return the average
display of all measurements.
Systolic
Diastolic
Pulse
Last data (Oldest)
English 17
4. Press the SET button to display the
memory display after changing the
user number.
5. Press the START button to turn the
device off. After one minute of
non-operation, the device will turn off
automatically.
User 1
User 2
User 3
User 4
English 18
What is an Irregular Heartbeat
The UA-767F blood pressure monitor provides a blood pressure and
pulse rate measurement even when an irregular heartbeat occurs. An
irregular heartbeat is defined as a heartbeat that varies by 25% from the
average of all heartbeats during the blood pressure measurement. It is
important that you are relaxed, remain still and do not talk during
measurements.
Note: We recommend contacting your physician if you see this
indicator frequently.
%IHB
%IHB is displayed as frequency of IHB detected.
IHB can detect not only noises such as physical movement but also an
irregular heartbeat. Therefore, we recommend contacting your physician
if %IHB level is high.
Number of detected
IHBs in memory
x 100 [%]
%IHB =
Total number
Display of %IHB: %IHB is displayed when displaying average values.
(Refer to “2. Recalling the Data” in “Operation Mode”)
%IHB is not displayed when the memory number is
six or less.
Average value display
Level 0
%IHB=0~24
Level 1
%IHB=25~49
Level 2
%IHB=50~74
Not displayed
English 19
Level 3
%IHB=75~100
Pressure Bar Indicator
The indicator monitors the progress of pressure during measurement.
Pressurizing
Releasing air
Inflation in progress
Measurement in progress
Inflation complete
WHO Classification Indicator
Each segment of the bar indicator
corresponds to the WHO blood pressure
classification described on the next page.
WHO Classification Indicator
Severe hypertension
Moderate hypertension
Mild hypertension
High normal
Normal
Optimal
Example:
Moderate hypertension
Mild hypertension
: The indicator displays a segment, based
on the current data, corresponding to the
WHO classification.
High normal
English 20
About Blood Pressure
What is Blood Pressure?
Blood pressure is the force exerted by blood against the walls of the
arteries. Systolic pressure occurs when the heart contracts. Diastolic
pressure occurs when the heart expands. Blood pressure is measured in
millimeters of mercury (mmHg). One's natural blood pressure is
represented by the fundamental pressure, which is measured first thing in
the morning while one is still at rest and before eating.
What is Hypertension and How is it Controlled?
Hypertension, an abnormally high arterial blood pressure, if left
unattended, can cause many health problems including stroke and heart
attack. Hypertension can be controlled by altering lifestyle, avoiding
stress, and with medication under a doctor’s supervision.
To prevent hypertension or keep it under control:
Do not smoke
Exercise regularly
Reduce salt and fat intake
Have regular physical checkups
Maintain proper weight
Why Measure Blood Pressure at Home?
Blood pressure measured at a clinic or doctor's office may cause
apprehension and can produce an elevated reading, 25 to 30 mmHg higher
than that measured at home. Home measurement reduces the effects of
outside influences on blood pressure readings, supplements the doctor's
readings and provides a more accurate, complete blood pressure history.
WHO Blood Pressure Classification
Standards to assess high
blood pressure, without
regard to age, have been
established by the World
Health Organization (WHO),
as shown in the chart.
Blood Pressure Variations
An individual’s blood pressure
varies greatly on a daily and
seasonal basis. It may vary
by 30 to 50 mmHg due to various conditions during the day. In hypertensive
individuals, variations are even more pronounced. Normally, the blood
pressure rises while at work or play and falls to its lowest levels during sleep.
So, do not be overly concerned by the results of one measurement.
Take measurements at the same time every day using the procedure
English 21
described in this manual to get to know
your normal blood pressure. Regular
readings give a more comprehensive
blood pressure history. Be sure to note
the date and time when recording your
blood pressure. Consult your doctor to
interpret your blood pressure data.
Troubleshooting
Problem
Nothing
appears on the
display, even
when the power
is turned on.
The cuff does
not inflate.
Possible Reason
Batteries are drained.
Battery terminals are
not in the correct
position.
Battery voltage is too low.
(LOW BATTERY mark)
blinks. If the batteries are
drained completely, the
mark does not appear.
The cuff is not applied
properly.
You moved your arm or
body during measurement.
The device does
not measure.
The cuff position is not
Readings are
correct.
too high or too
low.
Recommended Action
Replace all batteries with new
ones.
Reinstall the batteries with
negative and positive terminals
matching those indicated on the
battery compartment.
Replace all batteries with new
ones.
Apply the cuff correctly.
Make sure you remain very still
and quiet during measurement.
Sit comfortably and still.
Place your arm on a table with your
palm facing upward and the cuff at
the same level as your heart.
If you have a very weak or
irregular heat beat, the device
may have difficulty in determining
your blood pressure.
The value is different
Refer to “Why Measure Blood
from that measured at a
Pressure at Home?”.
clinic or doctor’s office.
Other
Remove the batteries.
Place them back properly and
take another measurement.
Note: If the actions described above do not solve the problem, contact the
dealer. Do not attempt to open or repair this product, as any attempt to
do so will make your warranty invalid.
English 22
Maintenance
Do not open the device. It uses delicate electrical components and an
intricate air unit that could be damaged. If you cannot fix the problem using
the troubleshooting instructions, contact the authorized dealer in your area
or our customer service department. The A&D customer service will
provide technical information, spare parts and units to authorized dealers.
The device was designed and manufactured for a long service life.
However it is generally recommended to have the device inspected every
2 years, to ensure proper functioning and accuracy. Please contact the
authorized dealer in your area or A&D for maintenance.
Technical Data
Type
Measurement method
Measurement range
UA-767F
Oscillometric measurement
Pressure: 0 - 299 mmHg
Systolic pressure: 60 - 279 mmHg
Diastolic pressure: 40 - 200 mmHg
Pulse:
40 - 180 beats / minute
Measurement accuracy
Pressure: ±3 mmHg
Pulse:
±5%
Power supply
4 x 1.5V batteries (R6P, LR6 or AA) or
AC adapter (TB-233) (Not included)
Number of measurements
Approx. 700 times LR6 (alkaline batteries)
Approx. 200 times R6P (manganese batteries)
With pressure value 180 mmHg, room temperature
23 °C.
Classification
Internally powered ME equipment (Supplied by
batteries) / Class II (Supplied by adapter)
Continuous operation mode
Clinical test
According to ANSI / AAMI SP-10 1992
EMC
IEC 60601-1-2: 2007
Memory
Last 60 measurements for each of the four users
Operating conditions
+10 to +40 °C / 15 to 85 %RH / 800 to 1060 hPa
Transport / Storage conditions -20°C to +60°C / 10%RH to 95%RH
Dimensions
Approx. 140 [W] x 60 [H] x 105 [D] mm
Weight
Approx. 255 g, excluding the batteries
Ingress protection
Device:
IP21
English 23
Applied part
Cuff
Type BF
Useful life
Device:
Cuff:
5 years (when used six times a day)
2 years (when used six times a day)
Accessory AC adapter
The adapter is to connect the device to a power source at home. Please
contact your local A&D dealer for purchasing. The AC adapter is required to
be inspected or replaced periodically.
TB-233
TB-233C
Input: 100-240V
500mA
Output: 6V
139°C 2A
TB-233BF
Input: 240V
Output: 6V
500mA
139°C 2A
Accessories sold separately
Cuff
Catalog Number
Cuff Size
Arm Size
CUF-F-LA
Large adult cuff
31 cm to 45 cm
CUF-I
Wide range cuff
22 cm to 42 cm
CUF-F-A
Adult cuff
22 cm to 32 cm
Arm size: The circumference at the biceps.
AC adapter
Catalog Number
TB-233C
TB-233BF
Plug (Outlet type)
Type C
Type BF
Note: Specifications are subject to change without prior notice.
EMC table information is listed on our website:
http://www.aandd.jp/products/manual/medical/emc_acadapter_en.pdf
English 24
1-243 Asahi , Kitamoto-shi, Saitama 364-8585, JAPAN
Telephone: [81] (48) 593-1111
Fax: [81] (48) 593-1119
A&D INSTRUMENTS LIMITED
Unit 24/26 Blacklands Way, Abingdon Business Park, Abingdon, Oxfordshire OX14 1DY United Kingdom
Telephone: [44] (1235) 550420
Fax: [44] (1235) 550485
A&D ENGINEERING, INC.
1756 Automation Parkway, San Jose, California 95131, U.S.A.
Telephone: [1] (408) 263-5333
Fax: [1] (408)263-0119
A&D AUSTRALASIA PTY LTD
32 Dew Street, Thebarton, South Australia 5031, AUSTRALIA
Telephone: [61] (8) 8301-8100
Fax: [61] (8) 8352-7409