DESIGN GUIDE
OVENS
|
C OOKTOPS
|
RANGES
|
R ANGETOPS
|
BBQ GRILLS
|
V E N T I L AT I O N
CONTENTS
Wolf Built-In Ovens
4
Wolf Electric Cooktops
9
Wolf Gas Cooktops
18
Wolf Integrated Modules
23
Wolf Microwave Ovens
34
Wolf Warming Drawers
40
Wolf Dual Fuel Ranges
44
Wolf Gas Ranges
51
Wolf Gas Rangetops
58
Wolf Gas BBQ Grills
62
Wolf Cooktop Ventilation
66
Wolf Pro Ventilation
76
Wolf Ventilation
Recommendations
86
Wolf Warranty
91
Features and specifications indicated
herein and on our website are subject
to change at any time without notice.
Check our website, wolfappliance.com
for the most up-to-date specifications.
IMPORTANT NOTE
As you follow these instructions, you
will notice warning and caution symbols.
This blocked information is important
for the safe and efficient installation of
Wolf equipment. There are two types of
potential hazards that may occur during
installation.
signals a situation where minor
injury or product damage may occur
if you do not follow instructions.
states a hazard that may cause
serious injury or death if precautions
are not followed.
WOLF ® is a registered trademark of Wolf Appliance Company, LLC
Another footnote we would like to
identify is IMPORTANT NOTE: This
highlights information that is especially
relevant to a problem-free installation.
WELCOME TO WOLF APPLIANCE
In this Design Guide, you’ll find all the necessary
information for specifying a Wolf oven, cooktop,
range, rangetop, BBQ grill or ventilation equipment into the next kitchen or home you design.
Each unit is handcrafted with the knowledge and
experience gleaned from being the premier
supplier of cooking equipment to professional
chefs and their restaurants for nearly 75 years.
Sub-Zero, a corporate companion and kitchen
soul mate, shares the identical values and pride
we take in providing the best cooking equipment.
A Wolf is beautiful and will complement any
design you use, whether it be contemporary or
traditional.
But that’s not why many customers turn to us.
We have a passion for cooking and it shows in
our work. Consumers appreciate the unique
features we have built in to our many different
models. You can refer to specifics as you page
through this guide.
The features are as numerous as the various
units you have to choose from. But one of the
more prominent highlights is the Wolf Dual
Convection System that is in all of our built-in
ovens and dual fuel ranges. It delivers even
temperature and airflow throughout the oven.
Its combination of fans and heating elements
operate either simultaneously or in sequence,
depending on which one of the eight different
cooking modes your client chooses.
In addition, our dual-stacked burners on the gas
cooktops and dual fuel ranges are all sealed and
offer you the capability of simmering foods.
Our electric cooktops are unique to the industry
with their capabilities of providing simmer on
all elements and the melt feature on one of the
elements. The triple element on the 36" (914)
cooktop can generate up to 2,700 watts for
those large pots that need fast boiling.
If you are looking for cooking performance,
but don’t want to shout it out in your kitchen
design, one of our new unframed electric
cooktops may be your choice. There’s no stainless steel trim, just the sophisticated black
ceramic glass top that can be mounted flush
with the top of the countertop or as a frameless
installation sitting on top of the countertop
surface.
The sizes, alternative tops, and selection of the
standard classic stainless steel and the premium
finishes of carbon or platinum stainless steel
make your decision-making process much more
fun for you and your clients. Now you can give
them exactly what they want without sacrificing
the quality they demand.
WOLF
WARRANTY
Wolf products are
covered by a two
and five year
residential warranty
(exclusions apply).
See warranty
details at the end
of this guide.
In all your applications you can depend on Wolf.
That reputation is even stronger because it is
backed by Sub-Zero. The combination of the two
is really greater than their sum.
Each Wolf unit is backed by the best warranty in
the business. Please refer to page 91 for details.
Review this Design Guide in greater detail
when you get a chance and keep it as a handy
reference. We are confident you will like what
you see.
The information and images in this guide are the copyright
property of Wolf Appliance Company, LLC, an affiliate of
Sub-Zero Freezer Company, Inc. Neither this book nor any
information or images contained herein may be copied or
used in whole or in part without the express written
permission of Wolf Appliance Company, LLC, an affiliate
of Sub-Zero Freezer Company, Inc.
©Wolf Appliance Company, LLC all rights reserved.
3
B U I LT- I N O V E N S
Model SO30F
Model SO30U
W O L F B U I LT- I N O V E N S
FEATURES
It’s hard to put into a few words the differences
you will see in the Wolf built-in ovens compared
to others on the market. Some of those differences are very dramatic, like the three finishes
offered. There is the standard classic stainless
steel along with two premium finishes offered
in platinum and carbon stainless steel.
Dual convection logic control system
The platinum look lets you have the beauty of
stainless steel without the sheen and reduces
the number of fingerprints, whereas the carbon
stainless steel is unlike any other black appliance
you have experienced.
Look closer and you will see two different door
styles offered—framed and unframed. The
framed is more traditional and lends itself nicely
with a professional rangetop, while the unframed
is sleek and contemporary in appearance.
Model SO36U
Did you notice that the control panel closes? It’s
an attractive feature and will enable you to hide
that control panel that many of us have labored
to make functional and tried to make beautiful.
Model DO30F
Inside, the beauty, design and functionality
continue. Brilliant halogen lights illuminate the
beautiful blue interior. As you open the oven
door, feel the smoothness of the door damper
system. Pull that bottom oven rack all the way
out and notice how it is nestled on the door
rails. With the dual convection fans, all models
offer eight different cooking modes.
Eight cooking modes
Rotating glass touch control panel
Cobalt blue porcelain oven interior
Three removable racks, six-level rack guide and
full-extension bottom rack—five-level rack guide
for 36" (914) oven
Large viewing triple-pane window
Dual interior halogen lighting
Hidden, dual-ribbon bake element
Recessed broil element
Temperature probe and receptacle
Proof feature and dehydration feature
(accessory required)
Self-clean, delayed start and sabbath feature
Door hinge with hydraulic damper assures
smooth opening and closing of the door
Factory-installed trim
CSA certified for US and Canada
This appliance is certified by
Star-K to meet strict religious
regulations in conjunction with
specific instructions found on
www.star-k.org.
B U I LT- I N O V E N F E AT U R E S
Model SO30F/S shown
Model DO30U
Electronics and
door cooling vents
Rotating electronic
control panel
Recessed broil
element
Oven door light
switch
Thermostat
Rating plate
location
COOKING MODES
Bake
Roast
Broil
Convection Bake
Convection Roast
Convection Broil
Three removable
racks
Probe receptacle
Hidden bake
element
Halogen lights
Bake Stone*
Door hinge with
hydraulic damper
Exhaust vent
Removable
six-level rack guide
4
Convection
Triple-pane window
Gasket
* Accessory required.
B U I LT- I N O V E N S
PLANNING INFORMATION
ELECTRICAL REQUIREMENTS
While you have many design options to consider
from a selection point of view, there are only
three different sizes to consider when planning
for your layout. You can choose either a 30"
(762) or 36" (914) single oven or a 30" (762)
double oven.
Single ovens require a separate, grounded 4-wire
240/208 V AC, 60 Hz, 30 amp service with its
own circuit breaker. Double ovens require a
separate, grounded 4-wire 240/208 V AC, 60 Hz,
50 amp service with its own circuit breaker.
For ease of installation, Wolf recommends using
33" (838) wide cabinets with 30" (762) ovens
and 39" (991) wide cabinets with the 36" (914)
oven. You will need a minimum 24" (610) of
usable cabinet depth. The cabinet must be able
to support 250 lbs (113 kg) for a single oven and
400 lbs (181 kg) for a double oven.
Wolf built-in ovens have a face trim on all four
sides and will overlap stiles and rails. The trim
overlaps 1/8" (3) on the bottom, 3/16" (5) on the
top and 3/4" (19) on each side.
IMPORTANT NOTE: Unless you are using
cabinets deeper than 24" (610), it is recommended that the electrical supply be placed in
an adjacent cabinet within reach of the conduit.
A 2" (51) diameter hole to route the conduit
through cabinetry will be required. Refer to the
Installation Specifications illustrations on the
following pages for location of the electrical
supply.
You must follow all National Electrical Code
regulations. In addition, be aware of local codes
and ordinances when installing your service.
Specifications on the following pages provide
overall dimensions, rough openings and installation specifics for the three different oven sizes.
We have minimized the information contained
in the illustrations, concentrating on the critical
information you must plan into your installation.
Built-In Ovens
30" (762) Single Oven – Framed
Classic Stainless
SO30F/S
30" (762) Single Oven – Unframed
Classic Stainless
SO30U/S
Platinum Stainless
SO30U/P
Carbon Stainless
SO30U/B
Wolf products are
covered by a two
and five year
residential warranty
(exclusions apply).
See warranty
details at the end
of this guide.
ACCESSORIES
Optional accessories
are available
through your Wolf
dealer. To obtain
local dealer
information, visit
the Locator section
of our website,
wolfappliance.com.
A Wolf single oven may be installed below an
electric or gas cooktop. Wolf built-in ovens are
designed and agency approved for installation
with Wolf cooktops only. Refer to the electric
and gas cooktops sections for additional
specifications. A built-in oven cannot be installed
below a Wolf rangetop.
MODEL OPTIONS
WOLF
WARRANTY
This appliance must be installed in accordance with
National Electrical Code regulations, as well as all
state, municipal and local codes. The correct
voltage, frequency and amperage must be supplied
to the appliance from a dedicated, grounded circuit
that is protected by a properly sized circuit breaker
or time delay fuse. The proper voltage, frequency
and amperage ratings are listed on the model / serial
rating plate.
36" (914) Single Oven – Unframed
Classic Stainless
SO36U/S
Platinum Stainless
SO36U/P
Carbon Stainless
SO36U/B
30" (762) Double Oven – Framed
Classic Stainless
DO30F/S
30" (762) Double Oven – Unframed
Classic Stainless
DO30U/S
Platinum Stainless
DO30U/P
Carbon Stainless
DO30U/B
ACCESSORIES
Contact your Wolf Dealer
Bake stone accessory, includes
stone, rack and peel
Additional oven racks
Two-piece broiler pan and
temperature probe
Dehydration racks with door stop
Stainless steel finishes.
Dimensions in parentheses are in
millimeters unless otherwise specified.
5
B U I LT- I N O V E N S
OVERALL DIMENSIONS
30" (762) Built-In Single Oven
S P E C I F I C AT I O N S
11/4"
TOP VIEW
RIGHT SIDE VIEW
30" (762) Built-In Single Oven
(32)
1 7/8"
(48)
Overall Width
29 7/8"
Overall Height
27 1/2" (699)
Overall Depth
24" (610)
Door Clearance
20 3/4"
POWER CORD
CHANNEL
(759)
24"
(662)
INSIDE
SIDE TRIM
(610)
(527)
16 1/2"
28 3/16"
(716)
(48)
29 7/8"
3"
(759)
(76)
24" (610)
BEHIND FRAME
OPEN OVEN DOOR
20 3/4"
(527)
16 3/8"
Interior Dimensions
(W x H x D)
x
x
(546 x 419 x 416)
Rec Cabinet Width
33" (838)
Min Cabinet Width
30" (762)
Min Cabinet Depth
24" (610)
Min Base Support
250 lbs (113 kg)
Opening Width
28 1/2" (724)
Opening Height
27 3/16" (691)
Electrical Supply
240/208 V AC, 60 Hz
30 amp dedicated circuit
Conduit
4' (1.2 m) flexible 4-wire
Electrical Rating
5.1 kW at 240 V
3.8 kW at 208 V
Total Amps
21
Shipping Weight
26 1/16"
(699)
1 7/8"
Oven Interior Capacity
Overall
4.5 cu ft (127 L)
Usable
3.4 cu ft (96 L)
21 1/2"
27 1/2"
Dimensions may vary to +
– 1/8" (3).
28"
(711)
I N S TA L L AT I O N S P E C I F I C AT I O N S
30" (762) Built-In Single Oven
Wall Application
33" (838)
RECOMMENDED CABINET WIDTH
30" min (762)
E
24" min (610)
OPENING DEPTH
27 3/16"
(691)
OPENING
HEIGHT
273 lbs (124 kg)
I N S TA L L AT I O N O P T I O N S
28 1/2" (724)
OPENING WIDTH
ELECTRICAL LOCATION
4"
WITHIN OPENING
(102)
APPLIES ONLY TO
CABINETS DEEPER
5" E
THAN 24" (610)
(127)
67" max
E
E
(1702)
The Wolf 30" (762) single oven may be
installed below a Wolf 30" (762) electric or
gas cooktop. Unless you are using cabinets
deeper than 24" (610), it is recommended
that the electrical supply be placed in the
base cabinet to the right of the oven within
reach of the conduit. The Wolf 30" (762)
single oven may also be installed below a
Wolf 36" (914) electric or gas cooktop.
The Wolf 30" (762) single oven may be
installed in combination with a Wolf
microwave and warming drawer. Refer to
page 37 for specifications.
A Wolf 30" (762) single oven may be installed
next to another 30" (762) single oven. You
must allow for a 2 1/2" (64) space between
the oven rough openings. Also, a separate
inner wall is required for each oven between
openings.
Undercounter Installation
33" (838)
RECOMMENDED CABINET WIDTH
30" min (762)
3 3/4" min (95)
27 3/16"
(691)
OPENING
HEIGHT
24" min (610)
OPENING DEPTH
I N S TA L L AT I O N
36" (914)
STANDARD
FLOOR TO
COUNTER
HEIGHT
5" E
ELECTRICAL
(127)
LOCATION WITHIN
4"
OPENING APPLIES
(102)
ONLY TO CABINETS
DEEPER THAN 24" (610)
E
28 1/2" (724)
OPENING WIDTH
4 3/4" min (121)
Refer to the installation
instructions shipped with
each Wolf product for
detailed specifications.
6
IMPORTANT NOTE: Unless you are using cabinets
deeper than 24" (610), it is recommended that the
electrical supply be placed in an adjacent cabinet within
reach of the conduit. Choose the location shown in the
illustrations that best suits your installation.
B U I LT- I N O V E N S
OVERALL DIMENSIONS
36" (914) Built-In Single Oven
RIGHT SIDE VIEW
11/4"
TOP VIEW
(32)
1 7/8"
24"
23" (584)
INSIDE
SIDE TRIM
(619)
(610)
1 7/8"
34 1/8"
(48)
(867)
35 5/8"
3"
24" (610)
(905)
(76)
BEHIND FRAME
36" (914) Built-In Single Oven
(48)
POWER CORD
CHANNEL
24 3/8"
S P E C I F I C AT I O N S
OPEN OVEN DOOR
Dimensions may vary to +
– 1/8" (3).
33 11/16"
(870)
I N S TA L L AT I O N S P E C I F I C AT I O N S
36" (914) Built-In Single Oven
Wall Application
39" (991)
RECOMMENDED CABINET WIDTH
36" min (914)
E
17 3/4"
(451)
Overall Width
35 5/8" (905)
Overall Height
24 3/8" (619)
Overall Depth
24" (610)
Door Clearance
17 3/4" (451)
Oven Interior Capacity
Overall
4.4 cu ft (125 L)
Usable
3.4 cu ft (96 L)
Interior Dimensions
(W x H x D)
26 1/2" x 13 1/4" x 16 3/8"
(673 x 337 x 416)
Rec Cabinet Width
39" (991)
Min Cabinet Width
36" (914)
Min Cabinet Depth
24" (610)
Min Base Support
250 lbs (113 kg)
Opening Width
34 1/2" (876)
Opening Height
24 1/16" (611)
Electrical Supply
240/208 V AC, 60 Hz
30 amp dedicated circuit
Conduit
3' (.9 m) flexible 4-wire
Electrical Rating
5.1 kW at 240 V
3.8 kW at 208 V
Total Amps
21
Shipping Weight
288 lbs (131 kg)
34 1/2" (876)
24" min (610)
OPENING DEPTH
24 1/16"
(611)
OPENING
HEIGHT
OPENING WIDTH
4"
ELECTRICAL LOCATION
(102)
WITHIN OPENING APPLIES
ONLY TO CABINETS
5" E
DEEPER THAN 24" (610)
(127)
67" max
E
E
(1702)
I N S TA L L AT I O N O P T I O N S
The Wolf 36" (914) single oven may be installed
below a Wolf 36" (914) electric or gas cooktop.
Unless you are using cabinets deeper than 24"
(610), it is recommended that the electrical
supply be placed in the base cabinet to the
right of the oven within reach of the conduit.
The 36" (914) single oven may also be installed
below a Wolf 30" (762) framed electric cooktop,
but not below a 30" (762) unframed electric
cooktop or 30" (762) gas cooktop. When a 36"
(914) oven is installed below a cooktop, it is
recommended that the rough opening for the
oven be 7 3/4" (197) from the floor to ease the
use of the oven door.
Undercounter Installation
39" (991)
RECOMMENDED CABINET WIDTH
36" min (914)
3 3/4" min (95)
24 1/16"
(611)
OPENING
HEIGHT
24" min (610)
OPENING DEPTH
36" (914)
STANDARD
FLOOR TO
COUNTER
HEIGHT
5" E
ELECTRICAL LOCATION
(127)
WITHIN OPENING APPLIES
4"
ONLY TO CABINETS
(102)
DEEPER THAN 24" (610)
34 1/2" (876)
OPENING WIDTH
7 3/4" (197) rec
4 3/4" (121) min
IMPORTANT NOTE: Unless you are using cabinets deeper
than 24" (610), it is recommended that the
electrical supply be placed in an adjacent cabinet within
reach of the conduit. Choose the location shown in the
illustrations that best suits your installation.
E
The Wolf 36" (914) single oven may be installed
above or below a Wolf warming drawer with
integrated drawer front. This installation may
also include a convection microwave with 36"
(914) trim. Refer to page 37 for specifications.
A Wolf 36" (914) single oven may be installed
directly above another 36" (914) oven. You must
allow enough space between the oven rough
openings to accommodate a base support for
the top oven. Each base cabinet support must
be able to support 250 lbs (113 kg).
A Wolf 36" (914) single oven may be installed
next to another 36" (914) oven. You must allow
for a 2 1/2" (64) space between the oven rough
openings. Also, a separate inner wall is required
for each oven between openings.
Dimensions in parentheses are in
millimeters unless otherwise specified.
7
B U I LT- I N O V E N S
OVERALL DIMENSIONS
30" (762) Built-In Double Oven
S P E C I F I C AT I O N S
11/4"
TOP VIEW
RIGHT SIDE VIEW
30" (762) Built-In Double Oven
(32)
1 7/8"
(48)
Overall Width
29 7/8"
Overall Height
50" (1270)
Overall Depth
24" (610)
Door Clearance
20 3/4"
POWER CORD
CHANNEL
(759)
24"
(610)
1 7/8"
(527)
16 1/2"
(716)
48 1/2"
(1270)
(1232)
INSIDE
SIDE TRIM
Oven Interior Capacity
Overall (per oven)
4.5 cu ft (127 L)
Usable (per oven)
3.4 cu ft (96 L)
21 1/2"
28 3/16"
(48)
50"
OPEN OVEN DOOR
16 3/8"
Interior Dimensions
(W x H x D)
x
x
(546 x 419 x 416) each
Rec Cabinet Width
33" (838)
Min Cabinet Width
30" (762)
Min Cabinet Depth
24" (610)
Min Base Support
400 lbs (181 kg)
Opening Width
28 1/2" (724)
Opening Height
49 5/8" (1260)
Electrical Supply
240/208 V AC, 60 Hz
50 amp dedicated circuit
Conduit
5' (1.5 m) flexible 4-wire
Electrical Rating
8.9 kW at 240 V
6.7 kW at 208 V
Total Amps
37
Shipping Weight
466 lbs (211 kg)
28"
29 7/8"
3"
(759)
(76)
(711)
24" (610)
BEHIND FRAME
Dimensions may vary to +
– 1/8" (3).
I N S TA L L AT I O N S P E C I F I C AT I O N S
30" (762) Built-In Double Oven
Wall Application
33" (838)
RECOMMENDED CABINET WIDTH
30" min (762)
E
I N S TA L L AT I O N
Refer to the installation
instructions shipped with
each Wolf product for
detailed specifications.
24" min (610)
OPENING DEPTH
49 5/8"
28 1/2" (724)
OPENING WIDTH
(1260)
OPENING
HEIGHT
67" max
(1702)
ELECTRICAL LOCATION
4"
WITHIN OPENING
(102)
APPLIES ONLY TO
CABINETS DEEPER
5" E
THAN 24" (610)
(127)
E
IMPORTANT NOTE: Unless you are using cabinets
deeper than 24" (610), it is recommended that the
electrical supply be placed in an adjacent cabinet within
reach of the conduit. Choose the location shown in the
illustrations that best suits your installation.
8
E
20 3/4"
(527)
WOLF ELECTRIC COOKTOPS
WOLF FRAMED ELECTRIC COOKTOPS
FEATURES
Behind the sophisticated, minimalist exterior,
beneath that perfectly smooth, subtly patterned
glass that cleverly reduces scratches, there is a
high-performance cooking tool.
Classic, platinum and carbon stainless steel trim
finishes—Model CT15E in classic stainless only
Easy-to-clean black ceramic glass surface is
resistant to scratching, staining, impact and
heat—translucent surface allows you to see the
glow of hot elements
The black ceramic glass top is beautifully
complemented by the classic stainless steel trim
finish, and for the 30" (762) and 36" (914)
cooktops, you can choose the premium finishes
of platinum or carbon stainless steel. The 15"
(381) cooktop is available only in the classic
stainless steel finish.
Illuminated electronic touch controls with
graduated control lighting
Model CT15E
15" (381) Framed
Electric Cooktop
True Simmer setting on all elements
Melt setting on one element
Multiple cooking elements with different zones
allow your customer a variety of different applications. The 36" (914) cooktop features a 12"
(305) diameter triple heating element—concentric
rings that give you exceptional control of
temperature for pans and pots of every size.
All of the heating elements offer True Simmer,
and with each cooktop there is one element that
enables you to set a temperature for melting.
Hot surface indicators on all elements
High frequency pulsation elements improve
cooking performance and control
Temperature limiter to ensure that safe
operating temperature of ceramic glass is never
exceeded
Model CT30E
30" (762) Framed
Electric Cooktop
Child safety lock key and universal off
CSA certified for US and Canada
Model CT36E
36" (914) Framed
Electric Cooktop
This appliance is certified by
Star-K to meet strict religious
regulations in conjunction with
specific instructions found on
www.star-k.org.
WOLF
WARRANTY
F R A M E D E L E C T R I C C O O K T O P F E AT U R E S
Model CT36E shown
Triple-zone
element
Illuminated electronic
touch controls
Dual-zone
element
MODEL OPTIONS
Framed Electric Cooktops
15" (381) Framed Electric Cooktop
Classic Trim
H
HIG
OFF
SIM
O
OF
F
ON
H
HIG
ON
OFF
ON
E2
ZON
CT15E/S
E2
ZON
ON
OFF
SIM
H
HIG
OFF
SIM
H
HIG
SIM
30" (762) Framed Electric Cooktop
Wolf products are
covered by a two
and five year
residential warranty
(exclusions apply).
See warranty
details at the end
of this guide.
H
HIG
ON
OFF
MELT
Child safety lock key
and universal off
Classic Trim
CT30E/S
Platinum Trim
CT30E/P
Carbon Trim
CT30E/B
36" (914) Framed Electric Cooktop
True Simmer
on all elements
Classic Trim
CT36E/S
Platinum Trim
CT36E/P
Carbon Trim
CT36E/B
Hot surface indicators
Stainless steel trim finishes.
Dimensions in parentheses are in
millimeters unless otherwise specified.
9
WOLF ELECTRIC COOKTOPS
ACCESSORIES
Optional accessories
are available
through your Wolf
dealer. To obtain
local dealer
information, visit
the Locator section
of our website,
wolfappliance.com.
I N S TA L L AT I O N
Refer to the installation instructions
shipped with each
Wolf product for
detailed specifications.
PLANNING INFORMATION
ELECTRICAL REQUIREMENTS
From a planning perspective, your selection
process is made easier by the three different
sizes you have to choose from. The 30" (762)
and 36" (914) framed electric cooktops are available in three trim finishes—classic, platinum and
carbon stainless steel. The 15" (381) cooktop is
available with classic stainless steel trim only.
The electrical requirements vary with the size
of the framed electric cooktop. Refer to the
specifications on the following pages for the
three different cooktop sizes. Locate electrical
supply within the shaded area shown in the
Installation Specifications illustration for your
model.
For ease of installation, Wolf recommends using
33" (838) cabinets with the 30" (762) cooktop
and 39" (991) cabinets with the 36" (914)
cooktop.
IMPORTANT NOTE: When an oven is installed
below the cooktop, unless you are using
cabinets deeper than 24" (610), it is recommended that the electrical supply be placed in
the base cabinet to the right of the oven. Refer
to pages 6–7 for additional specifications for
built-in ovens.
Specifications on the following pages provide
overall dimensions, countertop cut-out dimensions and installation specifics for the three
different sized cooktops. We have minimized
the information contained in the illustrations,
concentrating on the critical information you
must plan into your installation.
A Wolf single built-in oven may be installed
below these cooktops. Wolf framed electric
cooktops are designed and agency approved for
installation with Wolf built-in ovens only. Also,
be aware of the depth of the cooktop when
planning for this installation.
You must follow all National Electrical Code
regulations. In addition, be aware of local codes
and ordinances when installing your service.
These cooktops are intended for indoor use.
Multiple cooktops and/or integrated modules
can be installed side by side. Refer to the countertop cut-out dimensions on page 23 when
planning for this installation.
These cooktops can accommodate a Wolf
downdraft system, a cooktop or Pro ventilation
hood. When installing a ventilation hood, refer
to the specific requirements of the hood for the
minimum dimension to the countertop. Refer
to pages 66–90 for ventilation specifications.
ACCESSORIES
Contact your Wolf Dealer
Filler strip
Bracket supports for installation
of two integrated modules with
downdraft (Model CT15E)*
*Accessory not available for every
model.
10
This appliance must be installed in accordance with
National Electrical Code regulations, as well as all
state, municipal and local codes. The correct
voltage, frequency and amperage must be supplied
to the appliance from a dedicated, grounded circuit
that is protected by a properly sized circuit breaker
or time delay fuse. The proper voltage, frequency
and amperage ratings are listed on the model / serial
rating plate.
WOLF ELECTRIC COOKTOPS
OVERALL DIMENSIONS
15" (381) Framed Electric Cooktop
S P E C I F I C AT I O N S
15" (381) Framed Electric Cooktop
21"
(533)
OVERALL
DEPTH
15" (381)
OVERALL WIDTH
Overall Width
15" (381)
Overall Height
3 1/2" (89)
Overall Depth
21" (533)
Heating Elements
Two
Temperature Zones
Three
Max Element Power 750 W / 2200 W
(dual)
Max Element Power 1200 W
(single)
31/2" (89)
Dimensions may vary to +
– 1/8" (3).
Cabinet Depth
22 3/4" (578) min
Height Clearance
4" (102) min
Cut-Out Width*
13 3/8" (340)
Cut-Out Depth
19 1/4" (489)
Electrical Supply
240/208 V AC, 60 Hz
15 amp dedicated circuit
Conduit
4' (1.2 m) flexible 3-wire
Electrical Rating
3.4 kW at 240 V
2.6 kW at 208 V
Shipping Weight
30 lbs (14 kg)
I N S TA L L AT I O N S P E C I F I C AT I O N S
15" (381) Framed Electric Cooktop
*If the 15" (381) cooktop is to be used with
any combination of additional cooktop units or
modules with a filler strip, the cut-out width
increases to 14" (356).
33" (838)
RECOMMENDED
CABINET WIDTH
13" max
(330)
19 1/4" (489)
COOKTOP CUT-OUT
DEPTH
24" OR 30"*
(610 or 762)
TO COUNTERTOP
18"
(457)
2 1/2"min
(64)
2"**
18"
(457)
13 3/8" (340)
(51)
The outer diameter of the heating elements are
9" (229) and 6 1/2" (165).
2"**
CUT-OUT
WIDTH
(51)
4" (102)
36" (914)
STANDARD
FLOOR TO
COUNTERTOP
HEIGHT
E
15"
(381)
15"
(381)
NOTE: Application shown allows for installation of two 15" (381) modules side-by-side with 33" (838) recommended cabinet width. 18" (457)
recommended cabinet width for installation of single 15" (381) module. *Minimum 24" (610) from protected cabinet or 30" (762) from unprotected
cabinet to countertop. **Minimum clearance from side edge of cooktop cut-out to combustible surface up to 18" (457) above countertop.
13 3/8" (340)
Countertop Cut-Out Dimensions
COOKTOP
CUT-OUT
WIDTH
2 1/2"min
(64)
19 1/4" (489)
COOKTOP
CUT-OUT DEPTH
FRONT OF COUNTERTOP
Dimensions in parentheses are in
millimeters unless otherwise specified.
11
WOLF ELECTRIC COOKTOPS
OVERALL DIMENSIONS
30" (762) Framed Electric Cooktop
S P E C I F I C AT I O N S
30" (762) Framed Electric Cooktop
Overall Width
30" (762)
Overall Height
3 1/2" (89)
Overall Depth
21" (533)
Heating Elements
Four
Temperature Zones
Six
21"
(533)
OVERALL
DEPTH
30" (762)
OVERALL WIDTH
Max Element Power 750 W / 2200 W and
(two dual)
950 W / 1900 W
Max Element Power 1200 W and 1500 W
(two single)
Cabinet Width
33" (838) rec
Cabinet Depth
22 3/4" (578) min
Height Clearance
4" (102) min
Cut-Out Width*
28 3/8" (721)
Cut-Out Depth
19 1/4" (489)
Electrical Supply
240 V AC / 60 Hz / 40 amp
208 V AC / 60 Hz / 30 amp
Conduit
4' (1.2 m) flexible 3-wire
Electrical Rating
6.8 kW at 240 V
5.2 kW at 208 V
Shipping Weight
45 lbs (20 kg)
31/2" (89)
Dimensions may vary to +
– 1/8" (3).
I N S TA L L AT I O N S P E C I F I C AT I O N S
30" (762) Framed Electric Cooktop
*If the 30" (762) cooktop is to be used with
any combination of additional cooktop units or
modules with a filler strip, the cut-out width
increases to 29" (737).
33" (838)
RECOMMENDED
CABINET WIDTH
30" min (762)
28 3/8" (721)
13" max
The outer diameter of the heating elements are
9" (229), 8 1/2" (216), 7" (179) and 6 1/2" (165).
(330)
19 1/4" (489)
COOKTOP CUT-OUT
DEPTH
24" OR 30"*
(610 or 762)
TO COUNTERTOP
2 1/2" min
(64)
18"
(457)
18"
(457)
COOKTOP CUT-OUT WIDTH
2"**
2"**
(51)
(51)
4" (102)
3 1/2" (89)
I N S TA L L AT I O N O P T I O N S
3 3/4" min
24" min
A Wolf 30" (762) single oven may be installed
below the Wolf 30" (762) framed electric
cooktop. For this installation, unless you are
using cabinets deeper than 24" (610), it is
recommended that the electrical supply be
placed in the base cabinet to the right of the
oven. A Wolf 36" (914) single oven may also
be installed below the Wolf 30" (762) framed
electric cooktop. Refer to pages 6 and 7 for
additional specifications.
(610)
(95)
36"(914)
STANDARD
FLOOR TO
COUNTERTOP
HEIGHT
(254)
30-INCH OVEN OPENING
*Minimum 24" (610) from protected cabinet or 30" (762) from unprotected cabinet to countertop.
**Minimum clearance from side edge of cooktop cut-out to combustible surface up to 18" (457) above countertop.
Countertop Cut-Out Dimensions
28 3/8" (721)
COOKTOP CUT-OUT WIDTH
I N S TA L L AT I O N
Refer to the installation
instructions shipped with
each Wolf product for
detailed specifications.
E
10"
19 1/4" (489)
COOKTOP
CUT-OUT DEPTH
2 1/2" min
(64)
FRONT OF COUNTERTOP
12
WOLF ELECTRIC COOKTOPS
OVERALL DIMENSIONS
36" (914) Framed Electric Cooktop
S P E C I F I C AT I O N S
36" (914) Framed Electric Cooktop
21"
(533)
OVERALL
DEPTH
36" (914)
Overall Width
36" (914)
Overall Height
3 1/2" (89)
Overall Depth
21" (533)
Heating Elements
Five
Temperature Zones
Eight
Max Element Power 1050 W / 2200 W /
(triple)
2700 W
OVERALL WIDTH
Max Element Power 750 W / 2200 W
(dual)
31/2" (89)
Max Element Power 1200 W, 1500 W
(three single)
and 1800 W
Dimensions may vary to +
– 1/8" (3).
I N S TA L L AT I O N S P E C I F I C AT I O N S
36" (914) Framed Electric Cooktop
39" (991)
13" max
(330)
19 1/4" (489)
COOKTOP CUT-OUT
DEPTH
24" OR 30"*
(610 or 762)
TO COUNTERTOP
RECOMMENDED CABINET WIDTH
36" min (914)
18"
(457)
2 1/2"min
(64)
2"**
18"
(457)
34 3/8" (873)
COOKTOP CUT-OUT WIDTH
2"**
(51)
(51)
4" (102)
3 1/2" (89)
3 3/4" min (95)
24" min
(610)
36" (914)
STANDARD
FLOOR TO
COUNTERTOP
HEIGHT
Cabinet Width
39" (991) rec
Cabinet Depth
22 3/4" (578) min
Height Clearance
4" (102) min
Cut-Out Width*
34 3/8" (873)
Cut-Out Depth
19 1/4" (489)
Electrical Supply
240 V AC / 60 Hz / 50 amp
208 V AC / 60 Hz / 40 amp
Conduit
4' (1.2 m) flexible 3-wire
Electrical Rating
9.4 kW at 240 V
7.1 kW at 208 V
Shipping Weight
60 lbs (27 kg)
*If the 36" (914) cooktop is to be used with
any combination of additional cooktop units or
modules with a filler strip, the cut-out width
increases to 35" (889).
The outer diameter of the heating elements are
11 7/8" (302), 9 1/8" (232), 7 7/8" (200), 7 1/8" (181)
and 6 1/2" (165).
E
10"
(254)
36-INCH OVEN OPENING
I N S TA L L AT I O N O P T I O N S
A Wolf 36" (914) single oven may be installed
below the Wolf 36" (914) framed electric
cooktop. For this installation, unless you are
using cabinets deeper than 24" (610), it is
recommended that the electrical supply be
placed in the base cabinet to the right of the
oven. A Wolf 30" (762) single oven may also
be installed below the Wolf 36" (914) framed
electric cooktop. Refer to pages 6 and 7 for
additional specifications.
*Minimum 24" (610) from protected cabinet or 30" (762) from unprotected cabinet to countertop.
**Minimum clearance from side edge of cooktop cut-out to combustible surface up to 18" (457) above countertop.
Countertop Cut-Out Dimensions
34 3/8" (873)
COOKTOP CUT-OUT WIDTH
19 1/4" (489)
COOKTOP
CUT-OUT DEPTH
2 1/2"min
(64)
When a 36" (914) oven is installed below a
cooktop, it is recommended that the rough
opening for the oven be 7 3/4" (197) from the
floor to ease the use of the oven door.
FRONT OF COUNTERTOP
Dimensions in parentheses are in
millimeters unless otherwise specified.
13
WOLF ELECTRIC COOKTOPS
Model CT30EU
30" (762) Unframed
Electric Cooktop
Model CT36EU
36" (914) Unframed
Electric Cooktop
WOLF UNFRAMED ELECTRIC COOKTOPS
FEATURES
Behind the sophisticated, minimalist exterior,
beneath that perfectly smooth, subtly patterned
glass that cleverly reduces scratches, there is a
high-performance cooking tool.
Can be mounted flush with top of countertop
or as a frameless installation sitting on top of
the countertop surface
There’s no stainless steel trim, just the sophisticated black ceramic glass top, with subtly
patterned design. The 30" (762) and 36" (914)
unframed electric cooktops can be mounted
flush with the top of the countertop or as a
frameless installation sitting on top of the
countertop surface.
Multiple cooking elements with different zones
allow your customer a variety of different applications. The 36" (914) cooktop features a 12"
(305) diameter triple heating element—concentric
rings that give you exceptional control of
temperature for pans and pots of every size.
All of the heating elements offer True Simmer,
and with each cooktop there is one element that
enables you to set a temperature for melting.
Easy-to-clean black ceramic glass surface is
resistant to scratching, staining, impact and
heat—translucent surface allows you to see the
glow of hot elements
Illuminated electronic touch controls with
graduated control lighting
True Simmer setting on all elements
Melt setting on one element
Hot surface indicators on all elements
High frequency pulsation elements improve
cooking performance and control
Temperature limiter to ensure that safe operating
temperature of ceramic glass is never exceeded
Child safety lock key and universal off
CSA certified for US and Canada
Flush mount installations are intended for
granite, solid surface or stone countertop
surfaces only. Failure to use high heat
resistant surface will result in countertop
damage if hot cooking utensils are accidentally moved off the cooking surface.
WOLF
WARRANTY
This appliance is certified by
Star-K to meet strict religious
regulations in conjunction with
specific instructions found on
www.star-k.org.
U N F R A M E D E L E C T R I C C O O K T O P F E AT U R E S
Model CT36EU shown
Triple-zone
element
Illuminated electronic
touch controls
H
HIG
SIM
E2
ZON
ON
OFF
OFF
O
H
HIG
ON
SIM
H
HIG
H
HIG
OFF
SIM
ON
OFF
ON
E2
ZON
SIM
H
HIG
ON
OFF
MELT
Child safety lock key
and universal off
True Simmer
on all elements
Unframed edge
14
MODEL OPTIONS
Unframed Electric Cooktops
Dual-zone
element
OF
F
Wolf products are
covered by a two
and five year
residential warranty
(exclusions apply).
See warranty
details at the end
of this guide.
Hot surface
indicators
30" (762)
CT30EU
36" (914)
CT36EU
WOLF ELECTRIC COOKTOPS
PLANNING INFORMATION
ELECTRICAL REQUIREMENTS
Wolf recommends using 33" (838) cabinets
with the 30" (762) cooktop and 39" (991)
cabinets with the 36" (914) cooktop.
The electrical requirements vary with the size
of the unframed electric cooktop. Refer to the
specifications on the following pages for the
two different cooktop sizes. Locate electrical
supply within the shaded area shown in the
Installation Specifications illustration for your
model.
The Wolf 30" (762) and 36" (914) unframed
electric cooktops can be mounted flush with the
top of the countertop or as a frameless installation sitting on top of the countertop surface.
There’s no stainless steel trim, just the black
ceramic glass surface. In either installation the
cooktop cut-out dimensions are the same. If it is
to be mounted flush with the countertop, you
will need to provide a recessed area surrounding
the cooktop cut-out.
IMPORTANT NOTE: If the cooktop is to be
mounted flush with the countertop, fabrication
of the recessed area must take place before the
final countertop installation. A template of the
countertop cut-out will be provided with the
cooktop for fabrication purposes.
Specifications on the following pages provide
overall dimensions, countertop cut-out dimensions and installation specifics for the two
different sized cooktops. We have minimized
the information contained in the illustrations,
concentrating on the critical information you
must plan into your installation.
IMPORTANT NOTE: When an oven is installed
below the cooktop, unless you are using
cabinets deeper than 24" (610), it is recommended that the electrical supply be placed in
the base cabinet to the right of the oven. Refer
to pages 6–7 for additional specifications for
built-in ovens.
You must follow all National Electrical Code
regulations. In addition, be aware of local codes
and ordinances when installing your service.
ACCESSORIES
Optional accessories
are available
through your Wolf
dealer. To obtain
local dealer
information, visit
the Locator section
of our website,
wolfappliance.com.
These cooktops are intended for indoor use.
I N S TA L L AT I O N
Refer to the installation instructions
shipped with each
Wolf product for
detailed specifications.
A Wolf single built-in oven may be installed
below these cooktops. Wolf unframed electric
cooktops are designed and agency approved for
installation with Wolf built-in ovens only. Also,
be aware of the depth of the cooktop when
planning for this installation.
A Wolf cooktop or Pro ventilation hood is
recommended with these cooktops. When
installing a ventilation hood, refer to the specific
requirements of the hood for the minimum
dimension to the countertop. Refer to pages
66–86 for ventilation specifications.
IMPORTANT NOTE: A Wolf downdraft ventilation system cannot be used with the unframed
electric cooktops.
IMPORTANT NOTE: Unframed electric cooktops
are not designed to be installed in combination
with other cooktops or modules.
This appliance must be installed in accordance
with National Electrical Code regulations, as well
as all state, municipal and local codes. The
correct voltage, frequency and amperage must
be supplied to the appliance from a dedicated,
grounded circuit that is protected by a properly
sized circuit breaker or time delay fuse. The
proper voltage, frequency and amperage ratings
are listed on the model / serial rating plate.
Dimensions in parentheses are in
millimeters unless otherwise specified.
15
WOLF ELECTRIC COOKTOPS
OVERALL DIMENSIONS
30" (762) Unframed Electric Cooktop
S P E C I F I C AT I O N S
30" (762) Unframed Electric Cooktop
Overall Width
30" (762)
Overall Height
4" (102)
Overall Depth
21" (533)
Heating Elements
Four
Temperature Zones
Six
21"
(533)
OVERALL
DEPTH
30" (762)
OVERALL WIDTH
Max Element Power 750 W / 2200 W and
(two dual)
950 W / 1900 W
Max Element Power 1200 W and 1500 W
(two single)
Cabinet Width
33" (838) rec
Cabinet Depth
22 3/4" (578) min
Height Clearance
4" (102) min
Cut-Out Width
28 3/8" (721)
Cut-Out Depth
19 3/8" (492)
Electrical Supply
240 V AC / 60 Hz / 40 amp
208 V AC / 60 Hz / 30 amp
Conduit
4' (1.2 m) flexible 3-wire
Electrical Rating
6.8 kW at 240 V
5.2 kW at 208 V
Shipping Weight
45 lbs (20 kg)
4" (102)
Dimensions may vary to +
– 1/8" (3).
I N S TA L L AT I O N S P E C I F I C AT I O N S
30" (762) Unframed Electric Cooktop
I N S TA L L AT I O N O P T I O N S
13" max
(330)
The Wolf 30" (762) unframed electric cooktop
can be mounted flush with the top of the
countertop or as a frameless installation
sitting on top of the countertop surface. In
either installation the cooktop cut-out dimensions are the same. If mounted flush with
the countertop, a recessed area surrounding
the cooktop cut-out is required.
IMPORTANT NOTE: Flush mount installations
are intended for granite, solid surface or
stone countertop surfaces only. If the
cooktop is to be mounted flush with the
countertop, fabrication of the recessed area
must take place before the final countertop
installation. A template of the countertop
cut-out will be provided with the cooktop for
fabrication purposes.
A Wolf 30" (762) single oven may be installed
below the 30" (762) unframed electric
cooktop. For this installation, unless you are
using cabinets deeper than 24" (610), it is
recommended that the electrical supply
be placed in the base cabinet to the right of
the oven. Refer to page 6 for additional
specifications.
24" OR 30"*
(610 or 762)
TO COUNTERTOP
SEE COUNTERTOP
CUT-OUT BELOW
18"
(457)
2"**
33" (838)
RECOMMENDED
CABINET WIDTH
18"
(457)
SEE COUNTERTOP
CUT-OUT BELOW
2"**
(51)
(51)
4" (102)
4 " min (102)
3 1/2" (89)
24" min
36"(914)
STANDARD
FLOOR TO
COUNTERTOP
HEIGHT
(610)
E
10"
(254)
30-INCH OVEN OPENING
*Minimum 24" (610) from protected cabinet or 30" (762) from unprotected cabinet to countertop.
**Minimum clearance from side edge of cooktop cut-out to combustible surface up to 18" (457) above countertop.
Countertop Cut-Out Dimensions
1 5/16" (49)
RECESSED AREA FOR
FLUSH MOUNT INSTALLATION ONLY
RADIUS
30 1/8"* (765)
RECESSED AREA FOR
FLUSH MOUNT INSTALLATION ONLY
28 3/8" (721) COOKTOP
CUT-OUT WIDTH
COUNTERTOP
PROFILE
7/8"
(22) max
21 1/8"* (537)
RECESSED AREA
FOR FLUSH MOUNT
INSTALLATION ONLY
5/16"(24)
7/16" (11) RADIUS
19 3/8" (492)
COOKTOP
CUT-OUT DEPTH
1 9/16" (40)
FRONT OF COUNTERTOP
*Minimum dimension, but may be exceeded by up to 1/8" (3).
16
2 7/16" (62)
WOLF ELECTRIC COOKTOPS
OVERALL DIMENSIONS
36" (914) Unframed Electric Cooktop
S P E C I F I C AT I O N S
36" (914) Unframed Electric Cooktop
21"
(533)
OVERALL
DEPTH
36" (914)
OVERALL WIDTH
Overall Width
36" (914)
Overall Height
4" (102)
Overall Depth
21" (533)
Heating Elements
Five
Temperature Zones
Eight
Max Element Power 1050 W / 2200 W /
(triple)
2700 W
Max Element Power 750 W / 2200 W
(dual)
4" (102)
Max Element Power 1200 W, 1500 W
(three single)
and 1800 W
Dimensions may vary to +
– 1/8" (3).
I N S TA L L AT I O N S P E C I F I C AT I O N S
36" (914) Unframed Electric Cooktop
Cabinet Width
39" (991) rec
Cabinet Depth
22 3/4" (578) min
Height Clearance
4" (102) min
Cut-Out Width
34 3/8" (873)
Cut-Out Depth
19 3/8" (492)
Electrical Supply
240 V AC / 60 Hz / 50 amp
208 V AC / 60 Hz / 40 amp
Conduit
4' (1.2 m) flexible 3-wire
Electrical Rating
9.4 kW at 240 V
7.1 kW at 208 V
Shipping Weight
60 lbs (27 kg)
13" max
(330)
24" OR 30"*
(610 or 762)
TO COUNTERTOP
SEE COUNTERTOP
CUT-OUT BELOW
18"
(457)
4" min (102)
39" (991)
RECOMMENDED CABINET WIDTH
2"**
2"**
(51)
(51)
E
10"
36" (914)
STANDARD
FLOOR TO
COUNTERTOP
HEIGHT
(610)
(254)
36-INCH OVEN OPENING
IMPORTANT NOTE: Flush mount installations
are intended for granite, solid surface or
stone countertop surfaces only. If the
cooktop is to be mounted flush with the
countertop, fabrication of the recessed area
must take place before the final countertop
installation. A template of the countertop
cut-out will be provided with the cooktop for
fabrication purposes.
*Minimum 24" (610) from protected cabinet or 30" (762) from unprotected cabinet to countertop.
**Minimum clearance from side edge of cooktop cut-out to combustible surface up to 18" (457) above countertop.
Countertop Cut-Out Dimensions
1 5/16" (49)
RECESSED AREA FOR
FLUSH MOUNT INSTALLATION ONLY
RADIUS
36 1/8"* (918)
RECESSED AREA FOR
FLUSH MOUNT INSTALLATION ONLY
34 3/8" (873)
COOKTOP CUT-OUT WIDTH
COUNTERTOP
PROFILE
7/8"
(22) max
21 1/8"* (537)
RECESSED AREA
FOR FLUSH MOUNT
INSTALLATION ONLY
5/16"(24)
7/16" (11) RADIUS
19 3/8" (492)
COOKTOP
CUT-OUT DEPTH
1 9/16" (40)
FRONT OF COUNTERTOP
*Minimum dimension, but may be exceeded by up to 1/8" (3).
Dimensions in parentheses are in
millimeters unless otherwise specified.
I N S TA L L AT I O N O P T I O N S
The Wolf 36" (914) unframed electric cooktop
can be mounted flush with the top of the
countertop or as a frameless installation
sitting on top of the countertop surface. In
either installation the cooktop cut-out dimensions are the same. If mounted flush with
the countertop, a recessed area surrounding
the cooktop cut-out is required.
4" (102)
3 1/2" (89)
24" min
18"
(457)
SEE COUNTERTOP CUT-OUT BELOW
2 7/16" (62)
A Wolf 36" (914) single oven may be installed
below the 36" (914) unframed electric
cooktop. For this installation, unless you are
using cabinets deeper than 24" (610), it is
recommended that the electrical supply
be placed in the base cabinet to the right of
the oven. A Wolf 30" (762) single oven may
also be installed below the Wolf 36" (914)
unframed electric cooktop. Refer to pages
6 and 7 for additional specifications.
When a 36" (914) oven is installed below a
cooktop, it is recommended that the rough
opening for the oven be 7 3/4" (197) from the
floor to ease the use of the oven door.
17
WOLF GAS COOKTOPS
Model CT15G
15" (381)
Gas Cooktop
Model CT30G
30" (762)
Gas Cooktop
WOLF GAS COOKTOPS
FEATURES
New features make cooking a greater pleasure
than ever. For instance, at higher settings the
dual-stacked burner design uses its upper-level
burner for maximum heat transfer. Merely turn
down the illuminated knob and the lower-tier
burners deliver fine-tuning control and True
Simmer. You’ll see why we patented this
concept when you can have the slightest of
flame and enjoy a simmer with no boiling or
scorching. This is heat tailored for every cooking
vessel you’re using—from the largest stockpot to
the smallest melting pan.
Available in natural and LP gas
All gas cooktops are available in the classic
stainless steel finish, and for the 30" (762) and
36" (914) cooktops you can choose the premium
platinum stainless steel finish. The 15" (381) gas
cooktop is available only in the classic stainless
steel finish.
Small 9,200 Btu/hr (2.7 kW) burners with 300
Btu/hr (.1 kW) delivered at simmer
A more powerful 15,000 Btu/hr (4.4 kW) burner
is standard on the 30" (762) and 36" (914) gas
cooktops.
Model CT36G
36" (914)
Gas Cooktop
The dual-stacked sealed burners and deep
recess of the seamless drawn pan area make
clean up of any of those previously unsightly
spills a snap.
Stainless steel top construction, available in
classic and platinum stainless steel finishes—
Model CT15G available in classic finish only
Dual-stacked, sealed burners with automatic
reignition on all settings
Large 15,000 Btu/hr (4.4 kW) burner with
800 Btu/hr (.2 kW) delivered at simmer—Models
CT30G and CT36G only
Medium 12,000 Btu/hr (3.5 kW) burner with
800 Btu/hr (.2 kW) delivered at simmer
Individual spark ignition system
True Simmer setting on all burners
Illuminated control panel with two-tiered control
knobs
Low-profile, cast iron continuous burner grates
with matte porcelain finish
Seamless drawn burner pan
CSA certified for US and Canada
This appliance is certified by
Star-K to meet strict religious
regulations in conjunction with
specific instructions found on
www.star-k.org.
WOLF
WARRANTY
G A S C O O K T O P F E AT U R E S
Model CT36G shown
Wolf products are
covered by a two
and five year
residential warranty
(exclusions apply).
See warranty
details at the end
of this guide.
Small 9,200 Btu/hr
(2.7 kW) burners
MODEL OPTIONS
Gas Cooktops
Low-profile
continuous grates
Two-tiered
control knobs
15" (381) Gas Cooktop
Classic Stainless
CT15G/S
30" (762) Gas Cooktop
Illuminated
control panel
Classic Stainless
CT30G/S
Platinum Stainless
CT30G/P
36" (914) Gas Cooktop
Classic Stainless
CT36G/S
Platinum Stainless
CT36G/P
Medium 12,000 Btu/hr
(3.5 kW) burner
Natural gas models listed; for LP gas
add (-LP) to the model number.
Seamless
drawn burner pan
18
Large 15,000 Btu/hr
(4.4 kW) burner
WOLF GAS COOKTOPS
PLANNING INFORMATION
ELECTRICAL | GAS REQUIREMENTS
Wolf offers three sizes of gas cooktops to
choose from to address your clients‘ needs. The
30" (762) and 36" (914) cooktops are available in
classic and platinum stainless steel finish. The
15" (381) cooktop module comes in classic
stainless steel only.
The electric ignition system is a safe, convenient
and reliable manner to provide ignition for the
burners. However, you need to make provisions
for a separate 120 V AC, 60 Hz power supply.
The service should have its own 15 amp circuit
breaker, and a grounded 3-prong receptacle
should be located within the reach of the
6' (1.8 m) power cord.
Wolf recommends using 33" (838) cabinets with
the 30" (762) cooktop and 39" (991) cabinets
with the 36" (914) cooktop.
Specifications on the following pages provide
overall dimensions, countertop cut-out dimensions and installation specifics for the three
different sized cooktops. We have minimized
the information contained in the illustrations,
concentrating on the critical information you
must plan into your installation.
A Wolf single built-in oven may be installed
below these cooktops. Wolf gas cooktops are
designed and agency approved for installation
with Wolf built-in ovens only. Also, be aware of
the depth of the cooktop when planning for this
installation.
Multiple cooktops and/or integrated modules
can be installed side by side. Refer to the countertop cut-out dimensions on page 23 when
planning for this installation.
These cooktops can accommodate a Wolf
downdraft system, a cooktop or Pro ventilation
hood. When installing a ventilation hood, refer
to the specific requirements of the hood for the
minimum dimension to the countertop. Refer
to pages 66–90 for ventilation specifications.
IMPORTANT NOTE: A ground fault circuit
interrupter (GFCI) is not recommended and may
cause interruption of operation.
Wolf gas cooktops are designed to operate on
natural gas at 5" (127) WC (water column)
pressure or LP gas at 10" (254) WC pressure.
The maximum gas supply pressure to the regulator should never exceed 14" (356) WC, .5 psi
(3.5 kPa). They are supplied with a 1/2" NPT male
gas connection at the right rear corner on the
bottom of the cooktop. The male connector exits
the unit straight down, and you are supplied
with a regulator with two female connectors.
Locate electrical and gas supply within the
shaded area shown in the Installation Specifications illustration for your model.
IMPORTANT NOTE: When an oven is installed
below the cooktop, unless you are using
cabinets deeper than 24" (610), it is recommended that the electrical supply be placed in
the base cabinet to the right of the oven. Refer
to pages 6–7 for additional specifications for
built-in ovens.
When a gas cooktop is installed above cabinets,
the gas and electrical placement is not critical.
A grounded outlet needs to be placed within 4'
(1.2 m) of the right rear of the cooktop.
ACCESSORIES
Optional accessories
are available
through your Wolf
dealer. To obtain
local dealer
information, visit
the Locator section
of our website,
wolfappliance.com.
H I G H A LT I T U D E
Wolf gas cooktops
using natural gas
function up to an
altitude of 8,000'
(2438 m) without
any adjustment.
Natural gas installations from 8,000'
(2438 m) to 10,000'
(3048 m) need the
high altitude
conversion kit.
LP gas installations
will operate up to
10,000' (3048 m)
without adjustment.
You must follow all National Electrical Code and
gas regulations. In addition, be aware of local
codes and ordinances when installing your
services.
ACCESSORIES
Contact your Wolf Dealer
These cooktops are intended for indoor use.
One-piece wok and single burner
grate (Models CT30G and CT36G)*
Filler strip
High altitude conversion kit
Bracket supports for installation
of two integrated modules with
downdraft (Model CT15G)*
*Accessory not available for every
model.
Dimensions in parentheses are in
millimeters unless otherwise specified.
19
WOLF GAS COOKTOPS
OVERALL DIMENSIONS
15" (381) Gas Cooktop
S P E C I F I C AT I O N S
15" (381) Gas Cooktop
Natural Gas
Model CT15G
LP Gas
Model CT15G-LP
Overall Width
15" (381)
Overall Height
4" (102)
Overall Depth
21" (533)
Burner Rating
(1) 12,000 Btu/hr
(3.5 kW) with
800 Btu/hr (.2 kW)
delivered at simmer
(1) 9,200 Btu/hr
(2.7 kW) with
300 Btu/hr (.1 kW)
delivered at simmer
21"
(533)
OVERALL
DEPTH
15" (381)
OVERALL WIDTH
4" (102)
Dimensions may vary to +
– 1/8" (3).
Cabinet Depth
22 3/4"
Height Clearance
4" (102) min
Cut-Out Width
14" (356)
I N S TA L L AT I O N S P E C I F I C AT I O N S
Cut-Out Depth
19 1/4" (489)
15" (381) Gas Cooktop
Electrical Supply
120 V AC, 60 Hz
15 amp dedicated circuit
Power Cord
6' (1.8 m) 3-prong
Gas Rating
21,200 Btu/hr
(6.2 kW)
Shipping Weight
30 lbs (14 kg)
(578) min
Dimensions may vary to +
– 1/8" (3).
33" (838)
RECOMMENDED
CABINET WIDTH
24" OR 30"*
(610 or 762)
TO COUNTERTOP
2 1/2"**
(64)
I N S TA L L AT I O N O P T I O N S
19 1/4" (489)
COOKTOP CUT-OUT
DEPTH
2 1/2" min
(64)
18"
(457)
7"**
(178)
14" (356)
CUT-OUT
WIDTH
18"
(457)
7"**
(178)
4" (102)
For the 15" (381) gas cooktop, the gas
service may be supplied through the floor if
the cooktop is not installed above an oven.
Refer to the illustration for specifics on
placement of gas and electrical.
Refer to the installation
instructions shipped with
each Wolf product for
detailed specifications.
15"
(381)
15"
(381)
LOCATION OF GAS
SUPPLY MAY ALSO
EXTEND 5" ON FLOOR
FROM BACK WALL
I N S TA L L AT I O N
G
E
36" (914)
STANDARD
FLOOR TO
COUNTERTOP
HEIGHT
LOCATION OF GAS SUPPLY
MAY ALSO EXTEND 5" ON
FLOOR FROM BACK WALL
5"
15"
(127)
(381)
NOTE: Application shown allows for installation of two 15" (381) modules side-by-side with 33" (838) recommended cabinet width. 18" (457)
recommended cabinet width for installation of single 15" (381) module. *Minimum 24" (610) from protected cabinet or 30" (762) from unprotected
cabinet to countertop. **Minimum clearance from side and rear edge of cooktop cut-out to combustible surface up to 18" (457) above countertop.
14" (356)
COOKTOP
CUT-OUT
WIDTH
Countertop Cut-Out Dimensions
2 1/2" min
(64)
19 1/4" (489)
COOKTOP
CUT-OUT DEPTH
FRONT OF COUNTERTOP
20
WOLF GAS COOKTOPS
OVERALL DIMENSIONS
30" (762) Gas Cooktop
S P E C I F I C AT I O N S
30" (762) Gas Cooktop
21"
(533)
OVERALL
DEPTH
30" (762)
OVERALL WIDTH
Natural Gas
Model CT30G
LP Gas
Model CT30G-LP
Overall Width
30" (762)
Overall Height
4" (102)
Overall Depth
21" (533)
Burner Rating
(1) 15,000 Btu/hr
(4.4 kW) with
800 Btu/hr (.2 kW)
delivered at simmer
4" (102)
Dimensions may vary to +
– 1/8" (3).
(1) 12,000 Btu/hr
(3.5 kW) with
800 Btu/hr (.2 kW)
delivered at simmer
I N S TA L L AT I O N S P E C I F I C AT I O N S
(2) 9,200 Btu/hr
(2.7 kW) with
300 Btu/hr (.1 kW)
delivered at simmer
30" (762) Gas Cooktop
33" (838)
RECOMMENDED
CABINET WIDTH
30" min (762)
24" OR 30"*
(610 or 762)
TO COUNTERTOP
2 1/2"**
(64)
19 1/4" (489)
COOKTOP CUT-OUT
DEPTH
2 1/2" min
18"
(457)
(64)
9"**
18"
29" (737)
COOKTOP CUT-OUT WIDTH
(457)
(229)
3 1/2" (89)
(95)
36" (914)
STANDARD
FLOOR TO
COUNTERTOP
HEIGHT
22 3/4" (578) min
Height Clearance
4" (102) min
Cut-Out Width
29" (737)
Cut-Out Depth
19 1/4" (489)
Electrical Supply
120 V AC, 60 Hz
15 amp dedicated circuit
Power Cord
6' (1.8 m) 3-prong
Gas Rating
45,400 Btu/hr
(13.3 kW)
Shipping Weight
50 lbs (23 kg)
(229)
3 3/4" min
(610)
33" (838) rec
Cabinet Depth
9"**
Dimensions may vary to +
– 1/8" (3).
4" (102)
24" min
Cabinet Width
E
G
10"
(254)
I N S TA L L AT I O N O P T I O N S
30-INCH OVEN OPENING
*Minimum 24" (610) from protected cabinet or 30" (762) from unprotected cabinet to countertop.
**Minimum clearance from side and rear edge of cooktop cut-out to combustible surface up to 18" (457) above countertop.
A Wolf 30" (762) single oven may be installed
below the Wolf 30" (762) gas cooktop. For
this installation, unless you are using
cabinets deeper than 24" (610), it is recommended that the electrical and gas supply
be placed in the base cabinet to the right of
the oven. Refer to page 6 for additional
specifications.
29" (737)
COOKTOP CUT-OUT WIDTH
Countertop Cut-Out Dimensions
19 1/4" (489)
COOKTOP
CUT-OUT DEPTH
2 1/2" min
(64)
FRONT OF COUNTERTOP
Dimensions in parentheses are in
millimeters unless otherwise specified.
21
WOLF GAS COOKTOPS
OVERALL DIMENSIONS
36" (914) Gas Cooktop
S P E C I F I C AT I O N S
36" (914) Gas Cooktop
Natural Gas
Model CT36G
LP Gas
Model CT36G-LP
Overall Width
36" (914)
Overall Height
4" (102)
Overall Depth
21" (533)
Burner Rating
(1) 15,000 Btu/hr
(4.4 kW) with
800 Btu/hr (.2 kW)
delivered at simmer
Cabinet Width
36" (914)
OVERALL WIDTH
4" (102)
(1) 12,000 Btu/hr
(3.5 kW) with
800 Btu/hr (.2 kW)
delivered at simmer
Dimensions may vary to +
– 1/8" (3).
(3) 9,200 Btu/hr
(2.7 kW) with
300 Btu/hr (.1 kW)
delivered at simmer
I N S TA L L AT I O N S P E C I F I C AT I O N S
39" (991) rec
Cabinet Depth
22 3/4" (578) min
Height Clearance
4" (102) min
Cut-Out Width
35" (889)
Cut-Out Depth
19 1/4" (489)
Electrical Supply
120 V AC, 60 Hz
15 amp dedicated circuit
Power Cord
6' (1.8 m) 3-prong
Gas Rating
54,600 Btu/hr
(16.0 kW)
Shipping Weight
21"
(533)
OVERALL
DEPTH
67 lbs (30 kg)
36" (914) Gas Cooktop
39" (991)
RECOMMENDED CABINET WIDTH
36" min (914)
24" OR 30"*
(610 or 762)
TO COUNTERTOP
2 1/2"**
(64)
19 1/4" (489)
COOKTOP CUT-OUT
DEPTH
2 1/2" min
(64)
18"
(457)
9"**
18"
35" (889)
COOKTOP CUT-OUT WIDTH
(457)
9"**
(229)
(229)
4" (102)
3 1/2" (89)
I N S TA L L AT I O N O P T I O N S
3 3/4" min (95)
24" min
(610)
A Wolf 36" (914) single oven may be installed
below the Wolf 36" (914) gas cooktop. For
this installation, unless you are using cabinets
deeper than 24" (610), it is recommended that
the electrical and gas supply be placed in the
base cabinet to the right of the oven. A Wolf
30" (762) single oven may also be installed
below the Wolf 36" (914) gas cooktop. Refer
to pages 6 and 7 for additional specifications.
When a 36" (914) oven is installed below a
cooktop, it is recommended that the rough
opening for the oven be 7 3/4" (197) from the
floor to ease the use of the oven door.
I N S TA L L AT I O N
36" (914)
STANDARD
FLOOR TO
COUNTERTOP
HEIGHT
22
G
10"
(254)
36-INCH OVEN OPENING
*Minimum 24" (610) from protected cabinet or 30" (762) from unprotected cabinet to countertop.
**Minimum clearance from side and rear edge of cooktop cut-out to combustible surface up to 18" (457) above countertop.
35" (889)
COOKTOP CUT-OUT WIDTH
Countertop Cut-Out Dimensions
19 1/4" (489)
COOKTOP
CUT-OUT DEPTH
2 1/2" min
(64)
Refer to the installation
instructions shipped with
each Wolf product for
detailed specifications.
E
FRONT OF COUNTERTOP
WOLF INTEGRATED MODULES
WOLF INTEGRATED MODULES
With Wolf‘s integrated modules, you have the
ultimate in customization. You can create your
own design by mixing and matching the various
components within this system. And when you
couple these modules with other cooktops
within the Wolf inventory, you and your client
will truly understand freedom of choice.
IMPORTANT NOTE: Refer to specifications on
the following pages for specific installation
requirements and limitations for each integrated
module. Review specific installation instructions
for product to product capabilities. Additional
information is provided in the specifications pdf
files on our website, wolfappliance.com
Some modules integrate with their larger
counterparts, right down to their low-profile
grates, dual-stacked gas burners, deep spill pan
and illuminated controls. The two-element
electric and dual-stacked sealed burner gas
cooktop modules deliver the same performance
and appearance as the larger electric and gas
cooktops.
Refer to the following illustration for countertop
cut-out dimensions for the installation of
multiple cooktops and/or modules.
Some integrated modules can be installed
together or with a 30" (762) or 36" (914)
cooktop. When multiple cooktops and/or
modules are installed side by side, the cut-out
dimensions shown in the illustration below are
derived by adding 1 1/4" (32) additional space
for each additional unit, to give you your total
cut-out width.
IMPORTANT NOTE: Where multiple cooktops
and/or modules are installed side by side, each
unit must have its own separate recommended
electrical circuit. When multiple gas cooktops
and/or modules are installed next to one
another, they can receive their gas supply from a
common line. However, each unit must have its
own regulator installed between the mainline
and the cooktop or module.
NEW
Model CT15I/S
Induction Cooktop
Model CT15E/S
Electric Cooktop
Model IG15/S
Electric Grill
These integrated modules are intended for
indoor use.
Model IS15/S
Electric Steamer
C O U N T E R T O P C U T- O U T D I M E N S I O N S
I N T E G R AT E D M O D U L E S
Installation of Multiple Cooktops and/or Modules
15" (381) Width
593/4" (1518) FOUR MODULES WIDTH OR
591/2" (1511) 30" COOKTOP AND TWO MODULES OR
501/4" (1276) 36" COOKTOP AND ONE MODULE
441/2" (1130) THREE MODULES WIDTH OR
441/4" (1124) 30" COOKTOP AND ONE MODULE
291/4" (743)
TWO MODULES WIDTH
21/2"min
(64)
14"
191/4"
(356)
CUT-OUT
WIDTH
(489)
CUT-OUT
DEPTH
FRONT OF COUNTERTOP
IMPORTANT NOTE: When two or more modules are
installed together, an integrated module filler strip is
recommended. If a Model DD30 downdraft system is
also installed, an integrated module support for downdraft ventilation is required. Contact your Wolf dealer
for information on these accessory components.
Dimensions in parentheses are in
millimeters unless otherwise specified.
Induction Cooktop
CT15I/S
Electric Cooktop
CT15E/S
Electric Grill
IG15/S
Electric Steamer
IS15/S
Electric Fryer
IF15/S
Gas Cooktop
CT15G/S
Gas Multi-Function
Cooktop
IM15/S
All integrated modules are available in
the classic stainless steel finish.
IMPORTANT NOTE: Refer to specifications on the following pages for specific
installation requirements and limitations
for each integrated module. Specifications for Model CT15E/S are found on
page 11 and Model CT15G/S specifications are on page 20.
Model IF15/S
Electric Fryer
Model CT15G/S
Gas Cooktop
Model IM15/S
Gas Multi-Function
Cooktop
23
WOLF INTEGRATED MODULES
NEW
Model CT15I/S
Induction Cooktop
WOLF
WARRANTY
Wolf products are
covered by a two
and five year
residential warranty
(exclusions apply).
See warranty
details at the end
of this guide.
INDUCTION COOKTOP
FEATURES
While induction cooking is new to North
America, it has been used in Europe for decades
by professionals and homeowners demanding
the best in performance.
Integrated design allows for use with multiple
cooktop units
Cooking with this sleek 15-inch powerhouse is
simply the best way to cook. Electricity flows
through a coil to produce a magnetic field under
the sleek black ceramic top. When an iron or
magnetic stainless steel pan is placed on the
surface, the magnetic field creates a current in
the pan, exciting the molecules and heating the
pan and not the cooktop. That‘s why the
cooktop stays cool to the touch and the food
cooks efficiently.
In fact, this unit is so efficient that it outperforms gas and electric cooktops. There is no
wasted heat because energy is supplied directly
to the cooking vessel, so nearly 90 percent of
the energy gets used to cook.
You can keep sauces and chocolates melted at
50 watts of power, or with the touch of a finger,
activate the hi-power boost feature and boil
water in nearly half the time you normally do.
Easy-to-clean black ceramic glass surface is
resistant to scratching, staining, impact and heat
Induction elements heat cookware not the glass,
for a cooler and safer cooking surface
Cookware sensing—elements will not be
energized without an iron or magnetic stainless
steel pan on the cooktop surface
Illuminated electronic touch controls with
graduated control lighting
High-efficiency elements deliver power and
control
Hi-Power mode boosts power on rear element
to 2200 W maximum power output by diverting
power from front element
Simultaneous operation of both elements at
1800 W each
True Simmer setting on both elements
Melt setting on both elements
Temperature limiter to ensure that safe operating temperature of ceramic glass is never
exceeded
The Wolf induction cooktop has it all.
ACCESSORIES
Optional accessories
are available
through your Wolf
dealer. To obtain
local dealer
information, visit
the Locator section
of our website,
wolfappliance.com.
Classic stainless steel trim finish
Child safety lock key and universal off
CSA certified for US and Canada
I N D U C T I O N C O O K T O P F E AT U R E S
OVERALL DIMENSIONS
Model CT15I/S
Induction Cooktop
Two induction
elements
Illuminated electronic
touch controls
21"
(533)
OVERALL
DEPTH
Child safety lock key
and universal off
H
HIG
LT
ME
ON
OFF
WER
HI-PO
HIGH
ON
OFF
SIM
O
OFF
15" (381)
OVERALL WIDTH
2 1/2" (64)
Classic stainless
steel trim finish
True Simmer and melt
on both elements
ACCESSORIES
Contact your Wolf Dealer
Filler strip
Bracket supports for installation
of two integrated modules with
downdraft
24
WOLF INTEGRATED MODULES
PLANNING INFORMATION
ELECTRICAL REQUIREMENTS
The illustrations provide the overall dimensions
and finished cut-out dimensions that you need
to plan for in your installation. We have minimized the information contained in the illustrations, concentrating on the critical information
you must plan into your installation.
The Wolf induction cooktop requires a separate,
grounded 3-wire 240/208 V AC, 60 Hz, 20 amp
service with its own circuit breaker. Locate
electrical within the shaded area shown in the
illustration.
IMPORTANT NOTE: When multiple cooktops
and/or modules are installed side by side, refer
to page 23 for countertop cut-out dimensions.
You must follow all National Electrical Code
regulations. In addition, be aware of local codes
and ordinances when installing your service.
I N S TA L L AT I O N
This cooktop module can accommodate a Wolf
downdraft system, a cooktop or Pro ventilation
hood. When installing a ventilation hood, refer
to the specific requirements of the hood for the
minimum dimension to the countertop. Refer
to pages 66–90 for ventilation specifications.
Refer to the
installation
instructions shipped
with each Wolf
product for detailed
specifications.
I N S TA L L AT I O N S P E C I F I C AT I O N S
S P E C I F I C AT I O N S
Induction Cooktop
Induction Cooktop
Overall Width
15" (381)
Overall Height
2 1/2" (64)
Overall Depth
21" (533)
Heating Elements
Two
Max Element Power 1800 W
(front)
33" (838)
RECOMMENDED
CABINET WIDTH
24" OR 30"*
19 1/4" (489)
COOKTOP CUT-OUT
DEPTH
(610 or 762)
18"
TO COUNTERTOP (457)
2 1/2"min
(64)
2"**
(51)
18"
(457)
13 3/8" (340)
2"**
CUT-OUT
WIDTH
(51)
6"
(152)
36" (914)
STANDARD
FLOOR TO
COUNTER
HEIGHT
E
15"
Max Element Power 2200 W
(rear)
Cabinet Depth
22 3/4" (578) min
Height Clearance
6" (152) min
Cut-Out Width*
13 3/8" (340)
Cut-Out Depth
19 1/4" (489)
Electrical Supply
240/208 V AC, 60 Hz
20 amp dedicated circuit
Conduit
4' (1.2 m) flexible 3-wire
Electrical Rating
3.4 kW at 240 V
2.6 kW at 208 V
Shipping Weight
30 lbs (14 kg)
(381)
15"
(381)
NOTE: Application shown allows for installation of two 15" (381) modules side-by-side with 33" (838) recommended cabinet width. 18" (457)
recommended cabinet width for installation of single 15" (381) module. *Minimum 24" (610) from protected cabinet or 30" (762) from unprotected
cabinet to countertop. **Minimum clearance from side edge of cooktop cut-out to combustible surface up to 18" (457) above countertop.
13 3/8" (340)
Countertop Cut-Out Dimensions
COOKTOP
CUT-OUT
WIDTH
2 1/2"min
(64)
19 1/4" (489)
COOKTOP
CUT-OUT DEPTH
*If the induction cooktop is to be used with
any combination of additional cooktop units or
modules with a filler strip, the cut-out width
increases to 14" (356).
IMPORTANT NOTE: A minimum height clearance
of 6" (152) is required. If a shelf is installed
below the unit, a 1" (25) gap at the rear of the
cabinet shelf is necessary to allow for proper
ventilation. Failure to do so could result in
decreased performance or product damage.
Dimensions may vary to +
– 1/8" (3).
FRONT OF COUNTERTOP
Dimensions in parentheses are in
millimeters unless otherwise specified.
25
WOLF INTEGRATED MODULES
Model IG15/S
Electric Grill Module
WOLF
WARRANTY
Wolf products are
covered by a two
and five year
residential warranty
(exclusions apply).
See warranty
details at the end
of this guide.
ELECTRIC GRILL MODULE
FEATURES
Who says you have to sacrifice the fun of grilling
when the weather changes and you cannot take
advantage of the outdoors? With this grill
cooktop you can easily handle steaks and all
sorts of food without the hassle of lava rocks
or briquettes.
Integrated design allows for use with multiple
cooktop units
There are two individual heating elements—front
and back—on this module that enable you to
cook on one side while keeping other items at
serving temperature.
For ease of cleaning, there are dishwasher safe
porcelainized plates below two 1400-watt
heating elements that accumulate any unwanted
grease and drain it away.
The Wolf electric grill module is available in
classic stainless steel.
Stainless steel top construction with classic
stainless steel finish
Two 1400-watt, individually controlled heating
elements—front and back for even grilling
Illuminated electronic touch controls with
graduated control lighting
Low-profile, one-piece cast iron grilling grate
with matte porcelain finish
Black porcelain-coated grease deflection plates
Easy-to-clean, removable porcelain collection
pan
Independent digital timer
CSA certified for US and Canada
This appliance is certified by Star-K
to meet strict religious regulations in
conjunction with specific instructions
found on www.star-k.org.
ACCESSORIES
Optional accessories
are available
through your Wolf
dealer. To obtain
local dealer
information, visit
the Locator section
of our website,
wolfappliance.com.
E L E C T R I C G R I L L F E AT U R E S
OVERALL DIMENSIONS
Model IG15/S
Electric Grill Module
Low-profile one-piece
grilling grate
Two 1400-watt
heating elements
21"
(533)
OVERALL
DEPTH
Illuminated electronic
touch controls
15" (381)
OVERALL WIDTH
61/4"
(159)
Removable
collection pan
Graduated
control lighting
ACCESSORIES
Contact your Wolf Dealer
Filler strip
26
WOLF INTEGRATED MODULES
PLANNING INFORMATION
ELECTRICAL REQUIREMENTS
The illustrations provide the overall dimensions
and finished cut-out dimensions that you need
to plan for in your installation. We have minimized the information contained in the illustrations, concentrating on the critical information
you must plan into your installation.
The Wolf electric grill module requires a
separate, grounded 3-wire 240/208 V AC, 60 Hz,
15 amp service with its own circuit breaker.
Locate electrical within the shaded area shown
in the illustration.
IMPORTANT NOTE: When multiple cooktops
and/or modules are installed side by side, refer
to page 23 for countertop cut-out dimensions.
You must follow all National Electrical Code
regulations. In addition, be aware of local codes
and ordinances when installing your service.
I N S TA L L AT I O N
The grill module can accommodate a Wolf
cooktop or Pro ventilation hood. When installing
a ventilation hood, refer to the specific requirements of the hood for the minimum dimension
to the countertop. Refer to pages 66–90 for
ventilation specifications.
Refer to the
installation
instructions shipped
with each Wolf
product for detailed
specifications.
IMPORTANT NOTE: Wolf does not recommend
the use of downdraft ventilation with the electric
grill module.
I N S TA L L AT I O N S P E C I F I C AT I O N S
S P E C I F I C AT I O N S
Electric Grill Module
Electric Grill Module
33" (838)
RECOMMENDED
CABINET WIDTH
24" OR 30"*
19 1/4" (489)
COOKTOP CUT-OUT
DEPTH
(610 or 762)
TO COUNTERTOP
2 1/2" min
18"
(457)
(64)
7"**
(178)
18"
14" (356)
CUT-OUT
WIDTH
(457)
7"**
(178)
6 1/4"
(159)
36" (914)
STANDARD
FLOOR TO
COUNTER
HEIGHT
E
Overall Width
15" (381)
Overall Height
6 1/4" (159)
Overall Depth
21" (533)
Temperature Zones
Two
Heating Element
Zone (front)
1400 W
Heating Element
Zone (rear)
1400 W
Total Element Power 2800 W
Cabinet Depth
22 3/4" (578) min
Height Clearance
6 1/4" (159) min
Cut-Out Width
14" (356)
Cut-Out Depth
19 1/4" (489)
Electrical Supply
240/208 V AC, 60 Hz
15 amp dedicated circuit
Conduit
4' (1.2 m) flexible 3-wire
Electrical Rating
2.8 kW at 240 V
2.1 kW at 208 V
Shipping Weight
50 lbs (28 kg)
15"
(381)
15"
(381)
NOTE: Application shown allows for installation of two 15" (381) modules side-by-side with 33" (838) recommended cabinet width. 18" (457)
recommended cabinet width for installation of single 15" (381) module. *Minimum 24" (610) from protected cabinet or 30" (762) from unprotected
cabinet to countertop. **Minimum clearance from side edge of cooktop cut-out to combustible surface up to 18" (457) above countertop.
Dimensions may vary to +
– 1/8" (3).
14" (356)
COOKTOP
CUT-OUT
WIDTH
Countertop Cut-Out Dimensions
2 1/2" min
(64)
19 1/4" (489)
COOKTOP
CUT-OUT DEPTH
FRONT OF COUNTERTOP
Dimensions in parentheses are in
millimeters unless otherwise specified.
27
WOLF INTEGRATED MODULES
Model IS15/S
Electric Steamer
Module
WOLF
WARRANTY
Wolf products are
covered by a two
and five year
residential warranty
(exclusions apply).
See warranty
details at the end
of this guide.
ELECTRIC STEAMER MODULE
FEATURES
From a temperature of 140˚F (60˚C) to boil, you
can keep food hot for long periods of time or
defrost easily without drying out or losing flavor.
Integrated design allows for use with multiple
cooktop units
The beauty of this steamer module is accented
by the sculptured glass domed lid, which is
easily inverted for storage to keep a low profile.
The deep, large vessel with a two-gallon (7.6 L)
capacity can hold up to 14 cups of cooked
pasta. Includes one solid and one perforated
stackable insert pan.
The diversity of our electric steamer includes
slow cooking, double boiling, steaming eggs,
steaming custard, proofing bread dough,
warming food and melting chocolate as well
as steaming vegetables.
The Wolf electric steamer module is available
in classic stainless steel.
Stainless steel top construction with classic
stainless steel finish
Hidden 2600-watt heating element
Illuminated electronic touch controls with
graduated control lighting
Large two-gallon (7.6 L) maximum capacity tub—
10-cup capacity for steaming
Two stackable stainless steel steamer insert
pans—one solid and one perforated
Uses include steaming vegetables, eggs and
custard, double boiling, proofing bread dough,
warming food and melting chocolate
Can function as a slow cooker for 8–10 hours
Reversible domed glass lid for easy storage
Independent digital timer
This steamer module must be installed at
least 15" (381) away from a Wolf fryer
module, as contact between water and hot
oil may cause burns from steam and hot oil.
Digital temperature readout and preheat indicator
Electronic drain
CSA certified for US and Canada
ACCESSORIES
Optional accessories
are available
through your Wolf
dealer. To obtain
local dealer
information, visit
the Locator section
of our website,
wolfappliance.com.
This appliance is certified by Star-K
to meet strict religious regulations in
conjunction with specific instructions
found on www.star-k.org.
E L E C T R I C S T E A M E R F E AT U R E S
OVERALL DIMENSIONS
Model IS15/S
Electric Steamer Module
Reversible
domed glass lid
Hidden 2600-watt
heating element
21"
(533)
OVERALL
DEPTH
Illuminated electronic
touch controls
15" (381)
OVERALL WIDTH
Deep drawn pan
7 1/2"
131/2" (343)
(191)
TO DRAIN
OUTLET
Graduated
control lighting
ACCESSORIES
Contact your Wolf Dealer
Filler strip
28
WOLF INTEGRATED MODULES
PLANNING INFORMATION
The illustrations provide the overall dimensions
and finished cut-out dimensions that you need
to plan for in your installation.
The steamer module can accommodate a Wolf
cooktop or Pro ventilation hood. When installing
a ventilation hood, refer to the specific requirements of the hood for the minimum dimension
to the countertop. Refer to pages 66–90 for
ventilation specifications.
IMPORTANT NOTE: When multiple cooktops
and/or modules are installed side by side, refer
to page 23 for countertop cut-out dimensions.
IMPORTANT NOTE: Wolf does not recommend
the use of downdraft ventilation with the electric
steamer module.
For the drain connection, the 5/8" (16) outlet
from the valve will accept a drain hose that must
flow downward to and tie into an existing sink
drain. Or a separate drain with a freefall may be
installed. Following local building codes, your
plumber will dictate how to plumb the unit. As
a third option, the consumer will supply a heat
resistant bucket for drainage in the location of
the drain outlet. Refer to the illustration for
location of the drain outlet.
I N S TA L L AT I O N
ELECTRICAL REQUIREMENTS
Refer to the
installation
instructions shipped
with each Wolf
product for detailed
specifications.
The Wolf electric steamer module requires a
separate, grounded 3-wire 240/208 V AC, 60 Hz,
15 amp service with its own circuit breaker.
Locate electrical within the shaded area shown.
You must follow all National Electrical Code
regulations. In addition, be aware of local codes
and ordinances when installing your service.
I N S TA L L AT I O N S P E C I F I C AT I O N S
S P E C I F I C AT I O N S
Electric Steamer Module
Electric Steamer Module
33" (838)
RECOMMENDED
CABINET WIDTH
24" OR 30"*
19 1/4" (489)
COOKTOP CUT-OUT
DEPTH
(610 or 762)
TO COUNTERTOP
2 1/2" min
18"
14" (356)
(457)
(64)
7"**
(178)
12 3/8"
(314)
7 5/8"
(194)
DRAIN OUTLET
LOCATION
18"
7"**
(178)
12 3/8"
13 1/2"
(314)
(343)
6"
(152)
STANDARD
FLOOR TO
COUNTER
HEIGHT
E
15" (381)
Overall Height
13 1/2" (343)
Overall Depth
21" (533)
Heating Element
2600 W
Cabinet Depth
22 3/4" (578) min
Height Clearance
13 1/2" (343) min
Cut-Out Width
14" (356)
Cut-Out Depth
19 1/4" (489)
Electrical Supply
240/208 V AC, 60 Hz
15 amp dedicated circuit
Conduit
4' (1.2 m) flexible 3-wire
Electrical Rating
2.6 kW at 240 V
1.9 kW at 208 V
Shipping Weight
40 lbs (18 kg)
(457)
CUT-OUT
WIDTH
36" (914)
Overall Width
DRAIN
OUTLET
LOCATION
15"
(381)
Dimensions may vary to +
– 1/8" (3).
15"
(381)
NOTE: Application shown allows for installation of two 15" (381) modules side-by-side with 33" (838) recommended cabinet width. 18" (457)
recommended cabinet width for installation of single 15" (381) module. *Minimum 24" (610) from protected cabinet or 30" (762) from unprotected
cabinet to countertop. **Minimum clearance from side edge of cooktop cut-out to combustible surface up to 18" (457) above countertop.
14" (356)
COOKTOP
CUT-OUT
WIDTH
Countertop Cut-Out Dimensions
2 1/2" min
(64)
This steamer module must be
installed at least 15" (381) away
from a Wolf fryer module, as contact
between water and hot oil may
cause burns from steam and hot oil.
19 1/4" (489)
COOKTOP
CUT-OUT DEPTH
FRONT OF COUNTERTOP
Dimensions in parentheses are in
millimeters unless otherwise specified.
29
WOLF INTEGRATED MODULES
Model IF15/S
Electric Fryer Module
WOLF
WARRANTY
Wolf products are
covered by a two
and five year
residential warranty
(exclusions apply).
See warranty
details at the end
of this guide.
ACCESSORIES
Optional accessories
are available
through your Wolf
dealer. To obtain
local dealer
information, visit
the Locator section
of our website,
wolfappliance.com.
ELECTRIC FRYER MODULE
FEATURES
To round out your options for the ideal kitchen,
you can choose a fryer, and Wolf offers a great
option that the market has never seen. When
your client uses this module, they‘ll be able to
create dinner specialties never tried before.
Integrated design allows for use with multiple
cooktop units
The accurate temperature control will enable
your customer to seal in that great flavor of the
food without absorbing any unnecessary grease.
The fryer can handle a variety of goods at a
wide range of oil temperatures.
The Wolf fryer module is available in classic
stainless steel. In addition, there is a metal
storage lid to keep the grease area free from
particles falling into the fryer.
Stainless steel top construction with classic
stainless steel finish
Hidden 2600-watt heating element
Illuminated electronic touch controls with
graduated control lighting
Large 11/4 gallon (3.8 L) capacity tub
Three baskets included—one large and two small
side by side, each with wire basket hanger
Low-profile lid
Melt feature for shortening or lard
Independent digital timer
Digital temperature readout and preheat indicator
This fryer module must be installed at least
15" (381) away from any open flame
cooking device. The open flame may cause
ignition of oil.
Easy manual locking drain capability
Recommended for installation with any Wolf
framed electric cooktop or the Wolf electric grill
module
CSA certified for US and Canada
This fryer module must be installed at least
15" (381) away from a Wolf steamer
module, as contact between water and hot
oil may cause burns from steam and hot oil.
E L E C T R I C F R Y E R F E AT U R E S
OVERALL DIMENSIONS
Model IF15/S
Electric Fryer Module
Low-profile lid
Hidden 2600-watt
heating element
21"
(533)
OVERALL
DEPTH
Illuminated electronic
touch controls
15" (381)
OVERALL WIDTH
Graduated
control lighting
Deep drawn pan
7 1/2"
131/2" (343)
(191)
TO DRAIN
OUTLET
Digital temperature
readout
ACCESSORIES
Contact your Wolf Dealer
Filler strip
30
WOLF INTEGRATED MODULES
PLANNING INFORMATION
The illustrations provide the overall dimensions
and finished cut-out dimensions that you need
to plan for in your installation.
IMPORTANT NOTE: Wolf does not recommend
the use of downdraft ventilation with the electric
fryer module.
IMPORTANT NOTE: When multiple cooktops
and/or modules are installed side by side, refer
to page 23 for countertop cut-out dimensions.
ELECTRICAL REQUIREMENTS
The Wolf electric fryer module requires a
separate, grounded 3-wire 240/208 V AC, 60 Hz,
15 amp service with its own circuit breaker.
Locate electrical within the shaded area shown
in the illustration.
The electric fryer module must be installed in a
base cabinet with access to the bottom of the
unit to drain the oil through a manual valve. The
consumer must supply a heat resistant bucket
to accept the drained oil. Refer to the illustration
for location of the drain outlet.
You must follow all National Electrical Code
regulations. In addition, be aware of local codes
and ordinances when installing your service.
The fryer module can accommodate a Wolf
cooktop or Pro ventilation hood. When installing
a ventilation hood, refer to the specific requirements of the hood for the minimum dimension
to the countertop. Refer to pages 66–90 for
ventilation specifications.
I N S TA L L AT I O N S P E C I F I C AT I O N S
S P E C I F I C AT I O N S
Electric Fryer Module
Electric Fryer Module
33" (838)
RECOMMENDED
CABINET WIDTH
24" OR 30"*
19 1/4" (489)
COOKTOP CUT-OUT
DEPTH
(610 or 762)
TO COUNTERTOP
2 1/2" min
18"
14" (356)
(457)
(64)
7"**
7 5/8"
(194)
DRAIN OUTLET
LOCATION
36" (914)
STANDARD
FLOOR TO
COUNTER
HEIGHT
7"**
(178)
12 3/8"
13 1/2"
(314)
(343)
DRAIN OUTLET
LOCATION
6"
Overall Width
15" (381)
Overall Height
13 1/2" (343)
Overall Depth
21" (533)
Heating Element
2600 W
Cabinet Depth
22 3/4" (578) min
Height Clearance
13 1/2" (343) min
Cut-Out Width
14" (356)
Cut-Out Depth
19 1/4" (489)
Electrical Supply
240/208 V AC, 60 Hz
15 amp dedicated circuit
Conduit
4' (1.2 m) flexible 3-wire
Electrical Rating
2.6 kW at 240 V
1.9 kW at 208 V
Shipping Weight
30 lbs (14 kg)
(152)
E
Refer to the
installation
instructions shipped
with each Wolf
product for detailed
specifications.
(457)
CUT-OUT
WIDTH
(178)
12 3/8"
(314)
18"
I N S TA L L AT I O N
15"
(381)
Dimensions may vary to +
– 1/8" (3).
15"
(381)
NOTE: Application shown allows for installation of two 15" (381) modules side-by-side with 33" (838) recommended cabinet width. 18" (457)
recommended cabinet width for installation of single 15" (381) module. *Minimum 24" (610) from protected cabinet or 30" (762) from unprotected
cabinet to countertop. **Minimum clearance from side edge of cooktop cut-out to combustible surface up to 18" (457) above countertop.
NOTE: Fryer module must be installed in a base cabinet with access to manual valve at base of unit to drain oil into heat resistant receptacle.
14" (356)
COOKTOP
CUT-OUT
WIDTH
Countertop Cut-Out Dimensions
2 1/2" min
(64)
19 1/4" (489)
COOKTOP
CUT-OUT DEPTH
FRONT OF COUNTERTOP
Dimensions in parentheses are in
millimeters unless otherwise specified.
This fryer module must be installed
at least 15" (381) away from any
open flame cooking device. The open
flame may cause ignition of oil.
This fryer module must be installed
at least 15" (381) away from a Wolf
steamer module, as contact
between water and hot oil may
cause burns from steam and hot oil.
31
WOLF INTEGRATED MODULES
Model IM15/S
Gas Multi-Function
Cooktop
WOLF
WARRANTY
G A S M U LT I - F U N C T I O N C O O K T O P
FEATURES
It’s really a misnomer to describe this wonderful
cooktop module as a wok instrument because it
is much more than that. The large, low-profile
grate will fit in nicely with any Wolf gas cooktop.
Integrated design allows for use with multiple
cooktop units
For true wok cooking, the burner sculpts the gas
flame into a plume, focusing heat in the center
of the wok, then dispersing it outward for
precisely controlled cooking. The larger grate will
handle your wok perfectly, but also accommodate even your largest stockpots, Dutch ovens
and the like. The powerful burner exceeds
18,000 Btu/hr (5.3 kW).
The Wolf multi-function cooktop is available
in classic stainless steel.
Available in natural and LP gas
Stainless steel top construction with classic
stainless steel finish
High output 18,000 Btu/hr (5.3 kW) dual-stacked
sealed burner
Automatic electronic reignition system
Illuminated control panel
Individual spark ignition system
Two interchangeable cast iron burner grates
with matte porcelain finish—wok grate and lowprofile continuous grate
Deep drawn burner pan
Wolf products are
covered by a two
and five year
residential warranty
(exclusions apply).
See warranty
details at the end
of this guide.
CSA certified for US and Canada
ACCESSORIES
Optional accessories
are available
through your Wolf
dealer. To obtain
local dealer
information, visit
the Locator section
of our website,
wolfappliance.com.
G A S M U LT I - F U N C T I O N C O O K T O P F E AT U R E S
OVERALL DIMENSIONS
Model IM15/S
Gas Multi-Function Cooktop
High-output 18,000
Btu/hr (5.3 kW) burner
Wok grate
shown
21"
(533)
OVERALL
DEPTH
15" (381)
OVERALL WIDTH
Illuminated
control panel
Deep drawn pan
5" (127)
Continuous
control knob
ACCESSORIES
Contact your Wolf Dealer
Filler strip
High altitude conversion kit
Bracket supports for installation
of two integrated modules with
downdraft
32
WOLF INTEGRATED MODULES
PLANNING INFORMATION
The illustrations provide the overall dimensions
and finished cut-out dimensions that you need
to plan for in your installation.
The service should have its own 15 amp circuit
breaker, and a grounded 3-prong receptacle
should be located within reach of the power
cord. Locate electrical and gas supply within
the shaded area shown in the illustration.
IMPORTANT NOTE: When multiple cooktops
and/or modules are installed side by side, refer
to page 23 for countertop cut-out dimensions.
IMPORTANT NOTE: A ground fault circuit
interrupter (GFCI) is not recommended and may
cause interruption of operation.
This cooktop module can accommodate a Wolf
downdraft system, a cooktop or Pro ventilation
hood. When installing a ventilation hood, refer
to the specific requirements of the hood for the
minimum dimension to the countertop. Refer
to pages 66–90 for ventilation specifications.
The gas multi-function cooktop is designed to
operate on natural gas at 5" WC pressure or LP
gas at 10" (254) WC pressure. The maximum
gas supply pressure to the regulator should
never exceed 14" (356) WC, .5 psi (3.5 kPa). It is
supplied with a 1/2" NPT male gas connection at
the right rear corner of the module.
ELECTRICAL | GAS REQUIREMENTS
The electric ignition system is a safe, convenient
and reliable manner to provide ignition for the
burner. The Wolf gas multi-function cooktop
requires a separate 120 V AC, 60 Hz power supply.
You must follow all National Electrical Code and
gas regulations. In addition, be aware of local
codes and ordinances when installing your
services.
H I G H A LT I T U D E
The Wolf gas multifunction cooktop
functions up to 8,000'
(2438 m) in altitude
without any adjustment. If installation is
above 8,000' (2438
m), contact your Wolf
dealer.
I N S TA L L AT I O N S P E C I F I C AT I O N S
S P E C I F I C AT I O N S
Gas Multi-Function Cooktop
Gas Multi-Function Cooktop
33" (838)
RECOMMENDED
CABINET WIDTH
24" OR 30"*
2 1/2"**
(64)
19 1/4" (489)
COOKTOP CUT-OUT
DEPTH
(610 or 762)
TO COUNTERTOP
2 1/2" min
18"
(457)
(64)
7"**
(178)
14" (356)
CUT-OUT
WIDTH
18"
G
E
Model IM15/S
LP Gas
Model IM15/S-LP
Overall Width
15" (381)
Overall Height
5" (127)
Overall Depth
21" (533)
Burner Rating
18,000 Btu/hr
(5.3 kW)
Cabinet Depth
22 3/4" (578) min
Height Clearance
5" (127) min
Cut-Out Width
14" (356)
Cut-Out Depth
19 1/4" (489)
Electrical Supply
120 V AC, 60 Hz
15 amp dedicated circuit
Power Cord
6' (1.8 m) 3-prong
Gas Rating
18,000 Btu/hr
(5.3 kW)
Shipping Weight
30 lbs (14 kg)
(457)
7"**
(178)
5" (127)
36" (914)
STANDARD
FLOOR TO
COUNTERTOP
HEIGHT
Natural Gas
15"
(381)
15"
LOCATION OF GAS
SUPPLY MAY ALSO
EXTEND 5" ON FLOOR
FROM BACK WALL
(381)
LOCATION OF GAS SUPPLY
MAY ALSO EXTEND 5" ON
FLOOR FROM BACK WALL
5"
(127)
NOTE: Application shown allows for installation of two 15" (381) modules side-by-side with 33" (838) recommended cabinet width. 18" (457)
recommended cabinet width for installation of single 15" (381) module. *Minimum 24" (610) from protected cabinet or 30" (762) from unprotected
cabinet to countertop. **Minimum clearance from side and rear edge of cooktop cut-out to combustible surface up to 18" (457) above countertop.
14" (356)
COOKTOP
CUT-OUT
WIDTH
Countertop Cut-Out Dimensions
2 1/2" min
(64)
Dimensions may vary to +
– 1/8" (3).
I N S TA L L AT I O N
19 1/4" (489)
COOKTOP
CUT-OUT DEPTH
Refer to the installation
instructions shipped with
each Wolf product for
detailed specifications.
FRONT OF COUNTERTOP
Dimensions in parentheses are in
millimeters unless otherwise specified.
33
WOLF MICROWAVE OVENS
Model MWC24
Free-Standing
Model MWC24
with 30" (762) Trim
WOLF CONVECTION MICROWAVE
FEATURES
Taking the experience we’ve gained from our
microwave ovens and combining that with the
expertise of convection, Wolf has brought the
best of both cooking technologies together in
one unit.
Built-in or free-standing convection microwave
oven with 1.5 cu ft (43 L) capacity and 900
watts of power
This handsome unit comes with trim kits to
mount the unit above a 30" (762) or 36" (914)
Wolf oven and finish off your cooking tower in
a single look. The trim comes in three stainless
steel looks—classic, platinum and carbon.
Classic, platinum or carbon stainless steel trim
finishes
Aside from looking beautiful whether you use
it in conjunction with an oven or not, the unit
offers you all the performance you would expect
from Wolf—a cooking company with a heritage
of nearly 75 years in the kitchen.
Easy-to-operate control panel and programmable power options
30" (762) or 36" (914) trim kit allows microwave
to be built in to fit above a Wolf built-in oven
Sensor cooking
Slow cook mode for up to four hours
Interactive display—99 minutes, 99 seconds
Menu label and food guide
Multi-language—English, French and Spanish
Removable 15 3/8" (391) turntable and turntable
support
Model MWC24
with 36" (914) Trim
Oven door with window
Multiple rack baking
Safety door latches—oven will not operate
unless the door is closed
Oven light comes on when oven is operating or
door is open
Tight door seals with one-touch door open pad
Rear ventilation openings
C O N V E C T I O N M I C R O W AV E F E AT U R E S
Model MWC24
Door hinges
Oven light
Convection
air openings
Lighted digital
display
Oven door
with window
Auto-touch
control panel
Safety door
latches
One-touch
door open pad
Rating plate
location
34
Ventilation
openings (rear)
Turntable
Waveguide
cover
WOLF MICROWAVE OVENS
PLANNING INFORMATION
The Wolf convection microwave oven can be
used free-standing or with optional 30" (762)
or 36" (914) trim, or can be built in to fit above
a Wolf 30" (762) or 36" (914) single oven.
IMPORTANT NOTE: In all instances, where the
microwave oven is built in, you must use one of
Wolf‘s trim kits to ensure proper ventilation.
The Wolf convection microwave oven with
30" (762) or 36" (914) trim kit will overlap stiles
and rails. The trim overlaps for the 30" (762) and
36" (914) trim kits are 13/16" (21) on the bottom,
5/16" (8) on the top and 1 3/16" (30) on each side.
Refer to the installation instructions provided
with the trim kit for detailed specifications.
These instructions can also be found on the
Wolf website at wolfappliance.com.
When using the Wolf convection microwave
oven as a free-standing unit, allow 2" (51) of
airflow space on top, rear and both sides. A
minimum 20 1/8" (511) cabinet depth is required.
Specifications on the following pages provide
overall dimensions, rough openings and installation options for the convection microwave oven.
We have minimized the information contained in
the illustrations, concentrating on the critical
information you must plan into your installation.
The Wolf convection microwave oven with 30"
(762) trim kit may be installed in combination
with a 30" (762) single oven and 30" (762)
warming drawer with stainless steel drawer
front. With the 36" (914) trim kit, the convection
microwave may be installed in combination with
a 36" (914) single oven and warming drawer
with integrated drawer front. Refer to installation
options on the following pages.
WOLF
WARRANTY
ELECTRICAL REQUIREMENTS
The Wolf convection microwave oven requires
a separate, grounded 110/120 V AC, 60 Hz
power supply. The service should have its own
15 amp circuit breaker, and a grounded 3-prong
receptacle should be located within reach of the
power cord.
IMPORTANT NOTE: A ground fault circuit
interrupter (GFCI) is not recommended and may
cause interruption of operation.
You must follow all National Electrical Code
regulations. In addition, be aware of local codes
and ordinances when installing your service.
Wolf products are
covered by a two
and five year
residential warranty
(exclusions apply).
See warranty
details at the end
of this guide.
ACCESSORIES
Optional accessories
are available
through your Wolf
dealer. To obtain
local dealer
information, visit
the Locator section
of our website,
wolfappliance.com.
TRIM KIT OPTIONS
Convection Microwave
30" (762) Stainless Steel Trim
Classic Trim
MWCTRIM30/S
Platinum Trim
MWCTRIM30/P
Carbon Trim
MWCTRIM30/B
36" (914) Stainless Steel Trim
Classic Trim
MWCTRIM36/S
Platinum Trim
MWCTRIM36/P
Carbon Trim
MWCTRIM36/B
Optional trim kits are ordered and shipped
as sales accessories.
Dimensions in parentheses are in
millimeters unless otherwise specified.
35
WOLF MICROWAVE OVENS
OVERALL DIMENSIONS
Convection Microwave and Trim
S P E C I F I C AT I O N S
Convection Microwave (free-standing)
Overall Width
24 3/4" (629)
Overall Height
14 7/8" (378)
Overall Depth
20 1/8"
Interior Oven Cap
1.5 cu ft (43 L)
Interior Oven Dim
(W x H x D)
16 1/8" x 9 5/8" x 16 1/8"
(410 x 244 x 410)
Electrical Supply
120 V AC, 60 Hz
15 amp dedicated circuit
Power
900 W
24 3/4" (629)
FREE-STANDING
WIDTH
11/4" (32)
2 11/16"
11/4" (32)
(68)
(511)
29 7/8" (759)
30" (762) TRIM WIDTH
19 7/8"
14 7/8"
(505)
TRIM
HEIGHT
(378)
FREE-STANDING
HEIGHT
2 11/16"
35 5/8" (905)
36" (914) TRIM WIDTH
20 1/8" (511)
BEHIND FRAME
(68)
Power Requirement 1.6 kw
(with convection)
Power Cord
3 1/2' (1.1 m) 3-prong
I N S TA L L AT I O N S P E C I F I C AT I O N S
Shipping Weight
68 lbs (31 kg)
Convection Microwave with 30" (762) Trim
Wall Application
S P E C I F I C AT I O N S
Convection Microwave with 30" (762) Trim
Overall Width
29 7/8" (759)
Overall Height
19 7/8" (505)
20 1/8" min
18 11/16"
20 1/8" (511)
(511)
OPENING DEPTH
(475)
OPENING
HEIGHT
Overall Depth
Rec Cabinet Width
33" (838)
Min Cabinet Width
30" (762)
Min Base Support
125 lbs (57 kg)
Opening Width
27 1/2" (699)
Opening Height
18 11/16" (475)
Opening Depth
20 1/8" (511) min
27 1/2" (699)
OPENING WIDTH
4"
(102)
5"
E
(127)
24" min
1" min
(610)
(25)
28 1/2" (724)
27 3/16"
30-INCH OVEN
ROUGH OPENING
(691)
33" (838)
RECOMMENDED CABINET WIDTH
30" min (762)
S P E C I F I C AT I O N S
Convection Microwave with 36" (914) Trim
Overall Width
35 5/8" (905)
Overall Height
19 7/8" (505)
Overall Depth
20 1/8" (511)
NOTE: At installation, wood cleats must be added to the opening for the microwave trim.
Rec Cabinet Width
39" (991)
Undercounter Installation
Min Cabinet Width
36" (914)
Min Base Support
125 lbs (57 kg)
Opening Width
33 3/8" (854)
Opening Height
18 11/16" (475)
Opening Depth
20 1/8" (511) min
Dimensions may vary to +
– 1/8" (3).
IMPORTANT NOTE: At installation, wood
cleats (not included) must be added to the
microwave opening for the 30" (762) and
36" (914) trim. Refer to the installation
instructions provided with the trim kit for
detailed specifications.
20 1/8" min
(511)
OPENING DEPTH
18 11/16"
(475)
OPENING
HEIGHT
36" (914)
STANDARD
FLOOR TO
COUNTER
HEIGHT
27 1/2" (699)
OPENING WIDTH
4"
(102)
5"
(127)
RECOMMENDED CABINET WIDTH
30" min (762)
NOTE: At installation, wood cleats must be added to the opening for the microwave trim.
IMPORTANT NOTE: For installation of the convection
microwave with 36" (914) trim, add 6" (152) to the
overall width dimensions shown in the illustrations.
36
E
33" (838)
WOLF MICROWAVE OVENS
I N S TA L L AT I O N S P E C I F I C AT I O N S
Convection Microwave with 30" (762) Trim
Installation with single oven and warming drawer
I N S TA L L AT I O N O P T I O N S
33" (838)
RECOMMENDED CABINET WIDTH
30" min (762)
The Wolf convection microwave oven with
30" (762) trim kit may be installed in combination with a 30" (762) single oven and 30"
(762) warming drawer with stainless steel
drawer front. Refer to page 6 for installation
specifications for the 30" (762) single oven.
27 1/2" (699)
20 1/8"min
(511)
MICROWAVE
OPENING WIDTH
18 11/16"
(475)
4"
(102)
5"
E
(127)
1" min
(25)
24" min
(610)
27 3/16"
(691)
Refer to the installation instructions provided
with each microwave trim kit and warming
drawer front for detailed specifications.
These instructions can also be found on the
Wolf website, wolfappliance.com. Dimensions
will vary according to the specific installation.
28 1/2" (724)
30-INCH OVEN
OPENING WIDTH
2" (51) x 2" (51)
ANTI-TIP BLOCK
5"
9 1/4" (235)
(127)
2 3/8"
E
4"
(102)
(60)
28 1/2" (724)
WARMING DRAWER
OPENING WIDTH
23 1/2" min
(597)
NOTE: Refer to the built-in 30" (762) single oven specifications for electrical location.
NOTE: At installation, wood cleats must be added to the opening for the microwave trim.
I N S TA L L AT I O N S P E C I F I C AT I O N S
I N S TA L L AT I O N O P T I O N S
Convection Microwave with 36" (914) Trim
Installation with single oven and warming drawer
The Wolf convection microwave oven with
36" (914) trim kit may be installed in combination with a 36" (914) single oven and
warming drawer with integrated drawer
front. Refer to page 7 for installation specifications for the 36" (914) single oven.
39" (991)
RECOMMENDED CABINET WIDTH
36" min (914)
26" min (660)
CABINET DEPTH
20 1/8" min
18 11/16"
(511)
(475)
33 3/8" (854)
MICROWAVE
OPENING WIDTH
4"
(102)
5"
(127)
E
1" min
(25)
24" min
24 1/16"
(610)
(611)
34 1/2" (876 )
36-INCH OVEN
OPENING WIDTH
IMPORTANT NOTE: In all applications, a
minimum 26" (660) deep cabinet is required
for the warming drawer with integrated
drawer front.
2 3/8"
2" (51) x 2" (51)
ANTI-TIP BLOCK**
(60)
5"
25 1/2" min
10 3/8"*
(648)
(264)
4"
Keep in mind that the width of the custom
panel for the warming drawer with integrated drawer front will vary according to
the specific installation. The rough opening
width will remain 29 15/16" (760) whether
installed in combination with a 30" (762) or
36" (914) single oven and microwave.
E
(127)
(102)
29 15/16"* (760)
WARMING DRAWER
OPENING WIDTH
Refer to the installation instructions provided
with each microwave trim kit and warming
drawer front for detailed specifications.
These instructions can also be found on the
Wolf website, wolfappliance.com. Dimensions
will vary according to the specific installation.
_ 1/8" (3).
*Dimension may vary by +
**Refer to installation instructions provided with the integrated drawer front (WDFRONT/I) for accurate placement of the anti-tip block.
NOTE: Refer to the built-in 36" (914) single oven specifications for electrical location.
NOTE: The width of the custom panel for the warming drawer with integrated drawer front will vary according to the specific installation,
but the rough opening width will remain 29 15/16" (760).
NOTE: At installation, wood cleats must be added to the opening for the microwave trim.
Dimensions in parentheses are in
millimeters unless otherwise specified.
37
WOLF MICROWAVE OVENS
Model MW24
Free-Standing
Model MW24
with 30" (762) Trim
WOLF NON-CONVECTION MICROWAVE
FEATURES
What sort of microwave oven can you expect
from a cooking company? This is the only nonconvection microwave that deserves the Wolf
name.
Built-in or free-standing non-convection
microwave oven with 2.0 cu ft (56 L) capacity
and 1200 watts of power
It‘s fast—1200 watts on high. Roomy—a full 2.0
cu ft (56 L). And it is a true cooking instrument
with a vast range of advanced features including
sensor cooking controlled from an interactive
display.
Sensor cooking
The unit is black with optional trim available in
the classic stainless steel finish.
Warming feature
With the trim in place, the microwave oven is
identical in width to our 30" (762) oven, so it
can be easily mounted above the oven to offer
an attractive combination look.
Multi-language—English, French and Spanish
WOLF
WARRANTY
Wolf products are
covered by a two
and five year
residential warranty
(exclusions apply).
See warranty
details at the end
of this guide.
Classic stainless steel trim finish
Easy-to-operate control panel and programmable power options
Interactive display—99 minutes, 99 seconds
Menu label and food guide
Removable 16" (406) turntable and support
Safety door latches—oven will not operate
unless the door is closed
Oven light comes on when oven is operating or
door is open
Tight door seals with one-touch door open pad
Rear ventilation openings
N O N - C O N V E C T I O N M I C R O W AV E F E AT U R E S
Model MW24
Door seals and
sealing surfaces
Ventilation
openings (rear)
Oven light
ACCESSORIES
Optional accessories
are available
through your Wolf
dealer. To obtain
local dealer
information, visit
the Locator section
of our website,
wolfappliance.com.
Rating plate
Interactive
display
Safety door
latches
Control panel
Oven door
with window
One-touch
door open pad
Door hinges
Turntable
Waveguide
cover
OVERALL DIMENSIONS
TRIM OPTION
Non-Convection Microwave and Trim
Non-Convection Microwave
24" (610)
FREE-STANDING WIDTH
30" (762)
Stainless Steel Trim
2 11/16" (68)
Classic
18 1/4"
13 3/8"
(464)
TRIM
HEIGHT
(340)
FREE-STANDING
HEIGHT
2 11/16" (68)
11/4" (32) 11/4" (32)
29 7/8" (759)
30" (762) TRIM WIDTH
Dimensions may vary to +
– 1/8" (3).
38
19 1/8" (486)
BEHIND FRAME
MWTRIM30/S
The optional trim kit is
ordered and shipped as a
sales accessory.
WOLF MICROWAVE OVENS
PLANNING INFORMATION
ELECTRICAL REQUIREMENTS
The Wolf non-convection microwave oven can
be used free-standing or with optional 30" (762)
trim, or can be built in to fit above a Wolf 30"
(762) single oven and/or 30" (762) warming
drawer with stainless steel drawer front.
The Wolf microwave oven requires a separate,
grounded 120 V AC, 60 Hz power supply. The
service should have its own 15 amp circuit
breaker, and a grounded 3-prong receptacle
should be located within the reach of the power
cord.
IMPORTANT NOTE: In all instances, where the
microwave oven is built in, you must use the
trim kit to ensure proper ventilation.
The Wolf non-convection microwave oven with
30" (762) trim kit will overlap stiles and rails. The
trim overlaps 13/16" (21) on the bottom, 7/16" (11)
on the top and 1 3/16" (30) on each side.
IMPORTANT NOTE: A ground fault circuit
interrupter (GFCI) is not recommended and may
cause interruption of operation.
You must follow all National Electrical Code
regulations. In addition, be aware of local codes
and ordinances when installing your service.
In a free-standing application, allow 2" (51) of
airflow space on top, rear and both sides. A
minimum 20" (508) cabinet depth is required.
S P E C I F I C AT I O N S
I N S TA L L AT I O N S P E C I F I C AT I O N S
Non-Convection Microwave
Non-Convection Microwave with 30" (762) Trim
Wall Application
33" (838)
RECOMMENDED CABINET WIDTH
30" min (762)
20" min
17"
(508)
(432)
27 1/2" (699)
MICROWAVE
OPENING WIDTH
E
1" min
(25)
24" min
27 3/16"
28 1/2" (724)
(610)
(691)
30-INCH OVEN
OPENING WIDTH
2" (51) x 2" (51)
ANTI-TIP BLOCK
5"
9 1/4" (235)
(127)
2 3/8"
4"
(60)
(102)
E
28 1/2" (724)
WARMING DRAWER
OPENING WIDTH
23 1/2" min
(597)
Overall Width
(free-standing)
24" (610)
Overall Width
with 30" (762) trim
29 7/8" (759)
Overall Height
(free-standing)
13 3/8" (340)
Overall Height
with 30" (762) trim
18 1/4" (464)
Overall Depth
19 1/8" (486)
Interior Oven Cap
2.0 cu ft (57 L)
Interior Oven Dim
(W x H x D)
17 3/8" x 10 1/2" x 18 5/8"
(441 x 267 x 473)
Rec Cabinet Width
33" (838)
Min Cabinet Width
30" (762)
Min Base Support
125 lbs (57 kg)
Opening Width
27 1/2" (699)
Opening Height
17" (432)
Opening Depth
20" (508) min
Electrical Supply
120 V AC, 60 Hz
15 amp dedicated circuit
Power
1200 W
Power Cord
3' (.9 m) 3-prong
Shipping Weight
50 lbs (23 kg)
NOTE: Refer to the built-in 30" (762) single oven specifications for electrical location.
Undercounter Installation
I N S TA L L AT I O N O P T I O N S
20" min
(508)
OPENING DEPTH
17" (432)
OPENING
HEIGHT
36" (914)
STANDARD
FLOOR TO
COUNTER
HEIGHT
Dimensions in parentheses are in
millimeters unless otherwise specified.
27 1/2" (699)
OPENING WIDTH
E
33" (838)
RECOMMENDED CABINET WIDTH
30" min (762)
The Wolf non-convection microwave oven
may be installed in combination with a 30"
(762) single oven and 30" (762) warming
drawer with stainless steel drawer front.
Refer to page 6 for installation specifications
for the 30" (762) single oven.
Refer to the installation instructions provided
with the trim kit for detailed specifications.
These instructions can also be found on the
Wolf website, wolfappliance.com.
39
WOLF WARMING DRAWERS
Model WD30
with Stainless Steel
Drawer Front
Model WD30
with Integrated
Drawer Front
WOLF WARMING DRAWERS
FEATURES
Warming drawers have a clear mission in life—
to take good care of good food until it’s time for
you to eat. Our improved air control helps keep
moist foods moist and crisp foods crisp. In
addition, Wolf warming drawers are among the
most spacious on the market, so you will have
little problem storing items.
Stainless steel drawer front and handle available
in classic, platinum and carbon finishes
There are handy shelves for the inside, plus an
optional set of five stainless steel containers that
divide the drawer into sections, keeping different
dishes warm at the same time.
Preset and variable temperature control
Integrated drawer front allows for custom wood
panel application
450-watt heating element
Hidden electronic touch control panel
Preset automatic shut-off or drawer can be left
on indefinitely
Stainless steel interior
From a design perspective, you have four
choices for the drawer front. Electronic controls
are hidden regardless of your panel selection.
Choose from the classic stainless steel look or
the premium finishes of platinum or carbon
stainless steel. Also available is the integrated
drawer front, which allows for a custom wood
panel. Wolf offers optional decorative handles
for the integrated drawer front. Keep in mind,
there are significant changes to the installation
procedure if you plan on using the integrated
drawer front.
Rack for stacking food
Removable stainless steel drawer tub
Full-extension, ball bearing drawer glides
UL certified for US and Canada
This appliance is certified by Star-K
to meet strict religious regulations in
conjunction with specific instructions
found on www.star-k.org.
W A R M I N G D R A W E R F E AT U R E S
Model WD30
(stainless steel drawer front shown)
Moisture
selection control
Removable stainless
steel drawer tub
Rack for
stacking food
Galvanized
exterior
Stainless steel
interior
Stainless steel
drawer front—three
finishes available
40
Hidden electronic
control panel
Ball bearing
drawer glides
ACCESSORIES
Contact your Wolf Dealer
Five-piece container set—includes
five commercial pans with lids,
one large 14-quart pan, two
medium 6-quart pans and two
small 3-quart pans
WOLF WARMING DRAWERS
PLANNING INFORMATION
ELECTRICAL REQUIREMENTS
The Wolf 30" (762) warming drawer is shipped
without any decorative drawer front. You must
order one of three stainless steel drawer fronts
(handle included) in classic, platinum or carbon
finish or the integrated front (no handle) for a
custom wood application.
The Wolf warming drawer requires a separate,
grounded 120 V AC, 60 Hz power supply. The
service should have its own 15 or 20 amp circuit
breaker, and a grounded 3-prong receptacle
should be located within reach of the power
cord and flush with the back wall. Locate
electrical within the shaded area shown in the
installation illustrations on the following pages.
Specifications on the following pages provide
overall dimensions, rough openings and
installation options for the warming drawer with
stainless steel and integrated drawer fronts.
Note that there are significant differences to the
installation requirements for the integrated
drawer front.
An anti-tip block must be installed to prevent
the unit from tipping forward when the drawer
is opened.
IMPORTANT NOTE: A ground fault circuit
interrupter (GFCI) is not recommended and may
cause interruption of operation.
You must follow all National Electrical Code
regulations. In addition, be aware of local codes
and ordinances when installing your service.
The base platform for the warming drawer must
be able to support 175 lbs (79 kg). This platform
must be a minimum of 1" (25) above the toe kick
to allow for the 11/16" (17) overlap of the
warming drawer trim.
WOLF
WARRANTY
Wolf products are
covered by a two
and five year
residential warranty
(exclusions apply).
See warranty
details at the end
of this guide.
ACCESSORIES
A Wolf warming drawer may be installed below a
Wolf single or double oven, or an electric or gas
cooktop, provided the warming drawer is fully
enclosed, top and bottom. The Wolf warming
drawer may also be installed next to or above
another Wolf warming drawer. Dimensions will
vary according to the specific installation.
Optional accessories
are available
through your Wolf
dealer. To obtain
local dealer
information, visit
the Locator section
of our website,
wolfappliance.com.
OVERALL DIMENSIONS
FRONT PANEL OPTIONS
Warming Drawer
(stainless steel drawer front shown)
Warming Drawer
Model WD30
10 1/4"
9"
(260)
(229)
29 7/8" (759)
OVERALL WIDTH
23 1/16" (586)
BEHIND FRAME
Classic Stainless
WDFRONT/S
Platinum Stainless
WDFRONT/P
Carbon Stainless
WDFRONT/B
Integrated
WDFRONT/I
(accepts wood panel)
Optional drawer front panels are
ordered and shipped as sales
accessories. Stainless steel drawer
front panels include matching tubular
handle.
Dimensions in parentheses are in
millimeters unless otherwise specified.
41
WOLF WARMING DRAWERS
STAINLESS STEEL DRAWER FRONT
Wolf recommends using a 33" (838) wide
cabinet for the warming drawer with stainless
steel drawer front. A minimum 30" (762) wide
by 24" (610) deep cabinet is required.
I N S TA L L AT I O N
Refer to the installation
instructions shipped with
each Wolf product for
detailed specifications.
S P E C I F I C AT I O N S
Warming Drawer with
Stainless Steel Drawer Front
Overall Width
29 7/8" (759)
Overall Height
10 1/4" (340)
Overall Depth
(behind frame)
23 1/16" (586)
Rec Cabinet Width
33" (838)
Min Cabinet Width
30" (762)
Min Cabinet Depth
24" (610)
Min Base Support
175 lbs (79 kg)
Opening Width
28 1/2" (724)
Opening Height
9 1/4" (235)
Opening Depth
23 1/2" (597)
Electrical Supply
120 V AC, 60 Hz
15 or 20 amp circuit
Heating Element
450 W
Power Cord
3' (.9 m) 3-prong
Shipping Weight
75 lbs (34 kg)
I N S TA L L AT I O N S P E C I F I C AT I O N S
Warming Drawer with Stainless Steel Drawer Front
Installation below Built-In Oven
33" (838)
RECOMMENDED CABINET WIDTH
30" min (762)
24" min (610)
CABINET DEPTH
28 1/2" (724)
24" min
27 3/16"
(610)
(691)
30-INCH OVEN
ROUGH OPENING
2" (51) x 2" (51)
ANTI-TIP BLOCK
5"
9 1/4" (235)
OPENING
HEIGHT
2 3/8"
(60)
23 1/2" min (597)
OPENING DEPTH
4"
ALLOW FOR
11/16" (17)
OVERLAP ON
ALL SIDES
(127)
E
(102)
28 1/2" (724)
WARMING DRAWER
OPENING WIDTH
Dimensions may vary to +
– 1/8" (3).
I N S TA L L AT I O N O P T I O N S
Undercounter Installation
The Wolf warming drawer with stainless
steel drawer front may be installed above or
below a Wolf 30" (762) single or double oven,
or below an electric or gas cooktop, provided
the warming drawer is fully enclosed, top
and bottom, with a minimum base support of
175 lbs (79 kg). Refer to the cooktop and
oven sections for additional specifications. It
may also be installed next to or above
another Wolf warming drawer. Dimensions
will vary according to the specific installation.
The Wolf warming drawer with stainless
steel drawer front may be installed in
combination with a 30" (762) single oven and
microwave oven with 30" (762) trim. Refer to
the illustrations on pages 37 and 39.
Refer to the installation instructions provided
with the stainless steel drawer front for
detailed specifications. These instructions
can also be found on the Wolf website,
wolfappliance.com.
42
33"(838)
RECOMMENDED CABINET WIDTH
30"min (762)
2" (51) x 2" (51)
ANTI-TIP BLOCK
5"
9 1/4" (235)
OPENING
HEIGHT
23 1/2" min (597)
OPENING DEPTH
24" min (610)
CABINET DEPTH
2 3/8"
(60)
36"(914)
STANDARD
FLOOR TO
COUNTER
HEIGHT
4"
ALLOW FOR
11/16" (17)
OVERLAP ON
ALL SIDES
(127)
E
(102)
28 1/2" (724)
OPENING WIDTH
5" min (127)
BOTTOM
OF OPENING
TO FLOOR
WOLF WARMING DRAWERS
INTEGRATED DRAWER FRONT
IMPORTANT NOTE: A minimum 33" (838) wide
by 26" (660) deep cabinet is required for the
warming drawer with integrated drawer front.
The Wolf warming drawer with an integrated
drawer front can accommodate installations with
a 30" (762) or 36" (914) wide cooktop. It may
also be installed in combination with a 30" (762)
single or double oven or a 36" (914) single oven.
Dimensions will vary according to the specific
installation.
Keep in mind that the width of the custom panel
for the warming drawer with integrated drawer
front will vary according to the specific installation. The rough opening width will remain
29 15/16" (760) whether installed in combination
with a 30" (762) or 36" (914) cooktop or oven.
The decorative wood drawer front panel must
be a minimum of 1/2" (13) thick.
S P E C I F I C AT I O N S
I N S TA L L AT I O N S P E C I F I C AT I O N S
Warming Drawer with
Integrated Drawer Front
Warming Drawer with Integrated Drawer Front
Installation below Built-In Oven
26" min (660)
CABINET DEPTH
33" min (838)
CABINET WIDTH
28 1/2" (724)
24" min
27 3/16"
(610)
(691)
30-INCH OVEN
OPENING WIDTH
2" (51) x 2" (51)
ANTI-TIP BLOCK**
5"
10 3/8"*
(264)
OPENING
HEIGHT
2 3/8"
(60)
(127)
4"
E
(102)
29 15/16"* (760)
OPENING WIDTH
25 1/2" min (648)
OPENING DEPTH
Overall Width
29 7/8" (759)
Overall Height
10 1/4" (340)
Overall Depth
(behind frame)
23 1/16" (586)
Min Cabinet Width
33" (838)
Min Cabinet Depth
26" (660)
Min Base Support
175 lbs (79 kg)
Opening Width
29 15/16" (760)
Opening Height
10 3/8" (264)
Opening Depth
25 1/2" (648)
Electrical Supply
120 V AC, 60 Hz
15 or 20 amp circuit
Heating Element
450 W
Power Cord
3' (.9 m) 3-prong
Shipping Weight
75 lbs (34 kg)
Dimensions may vary to +
– 1/8" (3).
I N S TA L L AT I O N O P T I O N S
_ 1/8" (3).
*Dimension may vary by +
**Refer to installation instructions provided with the integrated drawer front (WDFRONT/I) for accurate placement of the anti-tip block.
Undercounter Installation
33" min (838)
CABINET WIDTH
2" (51) x 2" (51)
ANTI-TIP BLOCK**
5"
10 3/8"*
(264)
OPENING
HEIGHT
25 1/2" min (648)
OPENING DEPTH
+
_ 1/8"
(127)
2 3/8"
4"
(60)
(102)
36" (914)
STANDARD
FLOOR TO
COUNTER
HEIGHT
26" min (660)
CABINET DEPTH
*Dimension may vary by
IMPORTANT NOTE: A minimum 33" (838) wide
by 26" (660) deep cabinet is required for the
warming drawer with integrated drawer front.
29 15/16"* (760)
OPENING WIDTH
E
5 " min (127)
BOTTOM
OF OPENING
TO FLOOR
(3).
**Refer to installation instructions provided with the integrated drawer front (WDFRONT/I) for accurate placement of the anti-tip block.
Dimensions in parentheses are in
millimeters unless otherwise specified.
The Wolf warming drawer with integrated
drawer front may be installed above or below
any Wolf built-in oven, or below an electric
or gas cooktop, provided the warming drawer
is fully enclosed, top and bottom, with a
minimum base support of 175 lbs (79 kg).
Refer to the cooktop and oven sections for
additional specifications. It may also be
installed next to or above another Wolf
warming drawer. Dimensions will vary
according to the specific installation.
The Wolf warming drawer with integrated
drawer front may be installed in combination
with a 30" (762) or 36" (914) single oven and
microwave oven with 30" (762) or 36" (914)
trim. Refer to page 37. Dimensions will vary
according to the specific installation.
Refer to the installation instructions provided
with the integrated drawer front for detailed
specifications. These instructions can also be
found on the Wolf website, wolfappliance.com.
43
WOLF DUAL FUEL RANGES
WOLF DUAL FUEL RANGES
With Wolf‘s dual fuel ranges you have state-ofthe-art cooking expertise in any number of sizes
to meet the discriminating consumers‘ precise
needs. Patented features ensure this range
stands out from the rest in performance and
also beauty.
MODEL OPTIONS
Dual Fuel Ranges
DF304
DF366
DF486C
DF606DG
DF364C
DF486G
DF606F
DF364G
DF484CG
DF606CG
DF484DG
DF604CF
DF484F
DF604GF
This appliance is certified by
Star-K to meet strict religious
regulations in conjunction with
specific instructions found on
www.star-k.org.
Wolf dual fuel ranges come in 30" (762), 36"
(914), 48" (1219) and 60" (1524) widths.
Combined with the top configuration options,
the different configurations you can choose
from are numerous. Model numbers indicate the
top configurations: (C) charbroiler, (G) griddle,
(DG) double griddle and (F) French Top. All Wolf
dual fuel ranges come in the classic stainless
steel finish.
The electric oven(s) feature the Wolf exclusive
dual convection system that delivers even
temperature and airflow throughout. Its combination of convection fans and heating elements
give the user convenience and superior control
over eight different cooking modes. These
modes include bake, roast, broil, convection
bake, convection roast, convection broil,
convection and bake stone (with bake stone
accessory).
Advanced standard features such as dualstacked sealed burners, dual convection fans,
cobalt blue porcelain oven interior, pivoting
control panel, along with the Wolf exclusive
infrared charbroiler, infrared griddle and French
Top are all yours for the asking. The freedom to
customize your dual fuel range will make you
and your client look great.
COOKING MODES
Bake
Roast
Broil
Convection Bake
Convection Roast
Convection Broil
Convection
Bake Stone*
* Accessory required.
44
WOLF DUAL FUEL RANGES
FEATURES
Natural or LP gas rangetop with dual convection
electric oven(s)
Self-cleaning oven(s)
18" (457) oven on 48" (1219) range is single
convection
Coaxial temperature-displaying oven selector
knob
Optional infrared charbroiler, infrared griddle
and French Top configurations
Proof mode for 18" (457) oven on 48" (1219)
range
Classic stainless steel exterior finish with island
trim
Temperature probe feature
Cobalt blue porcelain oven interior
Distinctive red or black control knobs
Three removable oven racks, six-level rack guide
and full-extension bottom rack
Platinum bezels surround all knobs—chrome or
brass bezels optional
Hidden bake element and recessed broil element
in oven(s)
Dual-stacked sealed 15,000 Btu/hr (4.4 kW)
burners and one 9,200 Btu/hr (2.7 kW) burner,
all with simmer capabilities and automatic
reignition at all settings
Triple-pane oven door window(s) and dual
halogen lighting
Melt feature on 9,200 Btu/hr (2.7 kW) burner
Porcelain-coated cast iron continuous top grates
Spring/damper door system on oven door(s)
Adjustable stainless steel legs in front and
adjustable rear casters
WOLF
WARRANTY
Wolf products are
covered by a two
and five year
residential warranty
(exclusions apply).
See warranty
details at the end
of this guide.
CSA certified for US and Canada
Pivoting hidden touch control panel
ACCESSORIES
Eight cooking modes
D U A L F U E L R A N G E F E AT U R E S
Model DF484CG shown
Infrared griddle
(optional)
Infrared charbroiler
(optional)
Continuous cast
iron top grates
Stainless steel
island trim
Pivoting hidden
control panel
Dual-stacked
sealed burners
Control knobs with
platinum bezels
Optional accessories
are available
through your Wolf
dealer. To obtain
local dealer
information, visit
the Locator section
of our website,
wolfappliance.com.
ACCESSORIES
Contact your Wolf Dealer
5" (127) and 10" (254) classic
stainless steel risers
Griddle
indicator light
Coaxial oven
selector knob
Coaxial oven
selector knob
Stainless steel
exterior finish
Dual halogen
oven lighting
Single convection
oven—48" (1219)
range only
Spring/damper
door system
20" (508) classic stainless steel
riser with shelf
Red or black control knobs*
Bezel accent colors in chrome
or brass
Porcelain cast dual wok grate
Porcelain cast dual S-grates
Hardwood cutting board
Additional oven racks
Two-piece broiler pan and
temperature probe
Spring/damper
door system
Dehydration accessory
Adjustable front legs
and rear casters
Blue porcelain oven
interiors
Dual convection
oven
Bake stone accessory
High altitude conversion kit
* Red or black control knobs must
be ordered with the range.
Dimensions in parentheses are in
millimeters unless otherwise specified.
45
WOLF DUAL FUEL RANGES
PLANNING INFORMATION
ELECTRICAL | GAS REQUIREMENTS
Wolf dual fuel ranges come in 30" (762), 36"
(914), 48" (1219) and 60" (1524) widths. Specifications on the following pages provide overall
dimensions, finished rough opening dimensions
and installation specifics for each size of dual
fuel range. We have minimized the information
contained in the illustrations, concentrating on
the critical information you must plan into your
installation.
Specifications on the following pages provide
electrical and gas requirements for each size
of dual fuel range.
H I G H A LT I T U D E
Wolf dual fuel
ranges using natural
gas function up to an
altitude of 8,000'
(2438 m) without
any adjustment.
Natural gas and LP
gas installations
from 8,000' (2438 m)
to 11,000' (3353 m)
need the high
altitude kit. Contact
your Wolf dealer for
details.
IMPORTANT NOTE: Caution must be used in
planning the proper installation of the Wolf dual
fuel range to avoid fires or damage to adjacent
cabinetry or kitchen equipment. Please follow
the minimum clearances established in the
finished rough opening dimensions. Refer to
specifications on the following pages for your
model.
It is recommended that you use a Wolf Pro
ventilation hood with the Wolf dual fuel range.
Refer to pages 76–85 for Pro ventilation
specifications.
Locate electrical and gas supply within the
shaded area shown in the Installation Specifications illustration for your model.
Wolf dual fuel ranges are designed with a
terminal block on the rear of the range. The
terminal block allows for a 3-wire or 4-wire
installation. For a 4-wire installation, the ground
strap from the unit to the terminal block must be
cut. Two concentric knockouts on the base of
the unit are provided to allow a certified electrical contractor to wire the range directly to the
electrical supply. The terminal block will also
accept an appliance cord that is sized correctly
for the voltage and amperage of your range.
Wolf dual fuel ranges are designed to operate
on natural gas at 5" (127) WC (water column)
pressure or LP gas at 10" (254) WC pressure.
The maximum gas supply pressure to the regulator should never exceed 14" (356) WC, .5 psi
(3.5 kPa).
Wolf recommends the use of a 1/2" (13) I.D.
commercial-type flex hose; this is the minimum
size that may be used. All plumbing to the flex
hose must be 3/4" (19) minimum I.D. pipe.
I N S TA L L AT I O N
Refer to the installation instructions
shipped with each
Wolf product for
detailed specifications.
IMPORTANT NOTE: A separate external gas
shut-off valve must be located near the range
in an accessible location.
You must follow all National Electrical Code and
gas regulations. In addition, be aware of local
codes and ordinances when installing your
services.
B U R N E R R AT I N G
Dual Fuel Ranges
Surface Burners
15,000 Btu/hr
(4.4 kW) with
950 Btu/hr (.3 kW)
delivered at simmer
(1) 9,200 Btu/hr
(2.7 kW) with
325 Btu/hr (.1 kW)
delivered at simmer
Infrared Charbroiler
16,000 Btu/hr
(4.7 kW)
Infrared Griddle
18,000 Btu/hr
(5.3 kW)
Infrared Double
Griddle
(2) 18,000 Btu/hr
(5.3 kW)
French Top
15,000 Btu/hr
(4.4 kW)
Refer to the specific model requirements
for risers in non-island installations.
46
WOLF DUAL FUEL RANGES
OVERALL DIMENSIONS
30" (762) Dual Fuel Range
S P E C I F I C AT I O N S
29 1/2" (749)
OVERALL DEPTH
27 1/2" (699)
30" (762) Dual Fuel Range
(235)
56 7/8"
(1445)
WITH 20"
RISER
36 7/8"
35 7/8"
(937)
OVERALL
HEIGHT TO
COOKING
SURFACE
(911)
24 1/4"
46 7/8"
(616)
(1191)
WITH 10"
RISER
41 7/8"
(1064)
WITH 5"
RISER
29 7/8" (759)
OVERALL WIDTH
29 7/8" (759)
Overall Width
9 1/4"
47" (1194)
LEGS AND CASTERS ALLOW
21/8" (54) HEIGHT ADJUSTMENT
Overall Height
(to cooking surface) 36 7/8" (937)
29 1/2" (749)
Overall Depth
Oven Interior Capacity
Overall
4.5 cu ft (127 L)
Usable
3.4 cu ft (96 L)
Interior Dimensions
(W x H x D)
21 1/2" x 16 1/2" x 16 3/8"
(546 x 419 x 416)
Opening Width
30" (762)
Electrical Supply
240/208 V AC, 60 Hz
30 amp dedicated
circuit
Electrical Rating
5.2 kW at 240 V
4.5 kW at 208 V
Total Amps
21.7
Shipping Weight
325 lbs (147 kg)
Dimensions may vary to +
– 1/8" (3).
I N S TA L L AT I O N S P E C I F I C AT I O N S
MODEL OPTIONS
30" (762) Dual Fuel Range
30" (762) Dual Fuel Range
Four Surface
Burners
DF304
COMBUSTIBLE CONSTRUCTION
Natural gas model listed;
for LP gas add (-LP) to the
model number.
VENTILATION HOOD
13"max
(330)
30"min (762)
COUNTERTOP
TO COMBUSTIBLE
CONSTRUCTION
6"min
(152)
TO WALL
30"min (762) TO
36"max (914)
TO BOTTOM OF
VENTILATION HOOD
30" (762)
FINISHED ROUGH
OPENING WIDTH
10" (254)
81/2" LOCATION
(216)
OF GAS
SUPPLY
18"min (457)
TO COUNTERTOP
36"
(914)
31/4"
36 7/8"
(937) TO
COOKING
SURFACE
(83)
13"
LOCATION OF GAS AND
(330)
ELECTRICAL EXTENDS 3" (76) LOCATION OF
ON FLOOR FROM BACK WALL ELECTRICAL
Dimensions in parentheses are in
millimeters unless otherwise specified.
ISLAND INSTALLATIONS: 12" (305) MIN
CLEARANCE FROM BACK OF RANGE
TO COMBUSTIBLE CONSTRUCTION
47
WOLF DUAL FUEL RANGES
OVERALL DIMENSIONS
36" (914) Dual Fuel Ranges
S P E C I F I C AT I O N S
29 1/2" (749)
OVERALL DEPTH
27 1/2" (699)
36" (914) Dual Fuel Ranges
35 7/8" (911)
Overall Width
9 1/4"
(235)
Overall Height
(to cooking surface) 36 7/8" (937)
56 7/8"
(1445)
WITH 20"
RISER
29 1/2" (749)
Overall Depth
Oven Interior Capacity
Overall
5.3 cu ft (150 L)
Usable
4.2 cu ft (119 L)
Interior Dimensions
(W x H x D)
26 1/2" x 16 1/2" x 16 3/8"
(673 x 419 x 416)
Opening Width
36" (914)
Electrical Supply
240/208 V AC, 60 Hz
30 amp dedicated circuit
Electrical Rating
5.2 kW at 240 V
4.5 kW at 208 V
Total Amps
21.7
Shipping Weight
445–470 lbs
(202–213 kg)
36 7/8"
35 7/8"
(937)
OVERALL
HEIGHT TO
COOKING
SURFACE
(911)
24 1/4"
46 7/8"
(616)
(1191)
WITH 10"
RISER
41 7/8"
(1064)
WITH 5"
RISER
357/8" (911)
OVERALL WIDTH
47" (1194)
LEGS AND CASTERS ALLOW
21/8" (54) HEIGHT ADJUSTMENT
Dimensions may vary to +
– 1/8" (3).
MODEL OPTIONS
I N S TA L L AT I O N S P E C I F I C AT I O N S
36" (914) Dual Fuel Ranges
36" (914) Dual Fuel Ranges
Six Surface
Burners
DF366
COMBUSTIBLE CONSTRUCTION
Four Surface Burners
with Charbroiler
DF364C
with Griddle
DF364G
VENTILATION HOOD
Natural gas models listed;
for LP gas add (-LP) to the
model number.
IMPORTANT NOTE: A
minimum 10" (254) riser is
required when installing a
36" (914) dual fuel range
with a charbroiler or griddle
against a combustible
surface.
13"max
(330)
36"min (914)
COUNTERTOP
TO COMBUSTIBLE
CONSTRUCTION
44"min (1118)
FOR CHARBROILER
6"min
(152)
TO WALL
30"min (762) TO
36"max (914)
TO BOTTOM OF
VENTILATION HOOD
36" (914)
FINISHED ROUGH OPENING WIDTH
18"min (457)
TO COUNTERTOP
36"
(914)
I N S TA L L AT I O N
Refer to the installation
instructions shipped with
each Wolf product for
detailed specifications.
81/2"
(216)
LOCATION OF GAS AND
ELECTRICAL EXTENDS 3" (76)
ON FLOOR FROM BACK WALL
48
15" (381)
LOCATION
OF GAS
SUPPLY
19" (483)
LOCATION OF
ELECTRICAL
31/4"
36 7/8"
(937) TO
COOKING
SURFACE
(83)
ISLAND INSTALLATIONS: 12" (305) MIN
CLEARANCE FROM BACK OF RANGE
TO COMBUSTIBLE CONSTRUCTION
WOLF DUAL FUEL RANGES
OVERALL DIMENSIONS
48" (1219) Dual Fuel Ranges
S P E C I F I C AT I O N S
29 1/2" (749)
OVERALL DEPTH
27 1/2" (699)
48" (1219) Dual Fuel Ranges
(235)
56 7/8"
(1445)
WITH 20"
RISER
(616)
35 7/8"
(937)
OVERALL
HEIGHT TO
COOKING
SURFACE
(911)
29 1/2" (749)
Overall Depth
Interior Dimensions
(W x H x D)
41 7/8"
(1064)
WITH 5"
RISER
47 7/8" (1216)
OVERALL WIDTH
Overall Height
(to cooking surface) 36 7/8" (937)
Large Oven Interior Capacity
Overall
4.5 cu ft (127 L)
Usable
3.4 cu ft (96 L)
46 7/8"
(1191)
WITH 10"
RISER
24 1/4"
36 7/8"
47 7/8" (1216)
Overall Width
9 1/4"
21 1/2" x 16 1/2" x 16 3/8"
(546 x 419 x 416)
Small Oven Interior Capacity
Overall
2.5 cu ft (71 L)
Usable
1.8 cu ft (51 L)
Interior Dimensions
(W x H x D)
11 5/8" x 16 1/2" x 16 3/8"
(295 x 419 x 416)
Opening Width
48" (1219)
Electrical Supply
240/208 V AC, 60 Hz
50 amp dedicated
circuit
Electrical Rating
10.2 kW at 240 V
8.8 kW at 208 V
Total Amps
42.5
Shipping Weight
665–750 lbs
(302–340 kg)
47" (1194)
LEGS AND CASTERS ALLOW
21/8" (54) HEIGHT ADJUSTMENT
Dimensions may vary to +
– 1/8" (3).
I N S TA L L AT I O N S P E C I F I C AT I O N S
48" (1219) Dual Fuel Ranges
MODEL OPTIONS
COMBUSTIBLE CONSTRUCTION
48" (1219) Dual Fuel Ranges
Six Surface Burners
VENTILATION HOOD
13"max
(330)
with Charbroiler
DF486C
with Griddle
DF486G
Four Surface Burners
36"min (914)
COUNTERTOP
TO COMBUSTIBLE
CONSTRUCTION
30"min (762) TO
36"max (914)
44"min (1118)
FOR CHARBROILER
TO BOTTOM OF
VENTILATION HOOD
6"min
18"min (457)
TO COUNTERTOP
(152)
TO WALL
36"
(914)
10"
24" (610)
(254)
LOCATION
OF GAS
SUPPLY
31/4"
DF484CG
with Double
Griddle
DF484DG
with French Top
DF484F
Natural gas models listed;
for LP gas add (-LP) to the
model number.
48" (1219)
FINISHED ROUGH OPENING WIDTH
with Charbroiler
and Griddle
36 7/8"
(937) TO
COOKING
SURFACE
(83)
IMPORTANT NOTE: A
minimum 10" (254) riser is
required for all 48" (1219)
dual fuel range models
installed against a
combustible surface.
13"
LOCATION OF GAS AND
ELECTRICAL EXTENDS 3" (76)
ON FLOOR FROM BACK WALL
(330)
LOCATION OF
ELECTRICAL
Dimensions in parentheses are in
millimeters unless otherwise specified.
ISLAND INSTALLATIONS: 12" (305) MIN
CLEARANCE FROM BACK OF RANGE
TO COMBUSTIBLE CONSTRUCTION
49
WOLF DUAL FUEL RANGES
OVERALL DIMENSIONS
60" (1524) Dual Fuel Ranges
S P E C I F I C AT I O N S
29 1/2" (749)
OVERALL DEPTH
27 1/2" (699)
60" (1524) Dual Fuel Ranges
60 1/8" (1527)
Overall Width
9 1/4"
(235)
Overall Height
(to cooking surface) 36 7/8" (937)
56 7/8"
(1445)
WITH 20"
RISER
29 1/2" (749)
Overall Depth
Oven Interior Capacity
Overall (per oven)
4.5 cu ft (127 L)
Usable (per oven)
3.4 cu ft (96 L)
Interior Dimensions
(W x H x D)
21 1/2" x 16 1/2" x 16 3/8"
(546 x 419 x 416) each
Opening Width
60 1/4" (1530)
Electrical Supply
240/208 V AC, 60 Hz
50 amp dedicated
circuit
Electrical Rating
10.2 kW at 240 V
8.8 kW at 208 V
Total Amps
42.5
Shipping Weight
875–950 lbs
(397–431 kg)
36 7/8"
35 7/8"
(937)
OVERALL
HEIGHT TO
COOKING
SURFACE
(911)
24 1/4"
46 7/8"
(616)
(1191)
WITH 10"
RISER
41 7/8"
(1064)
WITH 5"
RISER
60 1/8" (1527)
OVERALL WIDTH
47" (1194)
LEGS AND CASTERS ALLOW
21/8" (54) HEIGHT ADJUSTMENT
Dimensions may vary to +
– 1/8" (3).
MODEL OPTIONS
I N S TA L L AT I O N S P E C I F I C AT I O N S
60" (1524) Dual Fuel Ranges
60" (1524) Dual Fuel Ranges
Six Surface Burners
with Double
Griddle
DF606DG
with French Top
DF606F
with Charbroiler
and Griddle
DF606CG
COMBUSTIBLE CONSTRUCTION
VENTILATION HOOD
Four Surface Burners
13"max
with Charbroiler
and French Top
DF604CF
with Griddle
and French Top
DF604GF
(330)
Natural gas models listed;
for LP gas add (-LP) to the
model number.
IMPORTANT NOTE: A
minimum 10" (254) riser is
required for all 60" (1524)
dual fuel range models
installed against a
combustible surface.
36"min (914)
COUNTERTOP
TO COMBUSTIBLE
CONSTRUCTION
30"min (762) TO
36"max (914)
44"min (1118)
FOR CHARBROILER
TO BOTTOM OF
VENTILATION HOOD
6"min
(152)
TO WALL
601/4" (1530)
FINISHED ROUGH OPENING WIDTH
18"min (457)
TO COUNTERTOP
36"
(914)
31"
(787)
10" (254)
LOCATION
OF GAS
SUPPLY
31/4"
36 7/8"
(937) TO
COOKING
SURFACE
(83)
13"
LOCATION OF GAS AND
ELECTRICAL EXTENDS 3" (76)
ON FLOOR FROM BACK WALL
50
(330)
LOCATION OF
ELECTRICAL
ISLAND INSTALLATIONS: 12" (305) MIN
CLEARANCE FROM BACK OF RANGE
TO COMBUSTIBLE CONSTRUCTION
WOLF GAS RANGES
WOLF GAS RANGES
If it looks as if it could be in a restaurant
kitchen, well, that’s natural. That’s precisely
where Wolf has spent the past seven decades,
perfecting the form, function and sheer durability of our stainless steel gas ranges.
Wolf gas ranges come in 30" (762), 36" (914),
48" (1219) and 60" (1524) widths, and
combined with the range top options, the
different configurations you can choose from
are numerous. Model numbers indicate the
range top features: (C) charbroiler, (G) griddle,
(DG) double griddle and (F) French Top.
Advanced standard features such as an
infrared oven broiler, convection baking, dual
burners, along with the Wolf exclusive infrared
charbroiler, infrared griddle and French Top
are all yours for the asking. The freedom to
customize your gas range will make you and
your client look great.
T O P C O N F I G U R AT I O N S
Gas Ranges
R304
R366
R488
R606DG
R364C
R486C
R606F
R364G
R486G
R606CG
R484CG
R604CF
R484DG
R604GF
All Wolf gas ranges come in the classic stainless steel finish and are shipped with the
distinctive red control knobs. Contact your
Wolf dealer for optional black knobs available
at no cost.
This appliance is certified by
Star-K to meet strict religious
regulations in conjunction with
specific instructions found on
www.star-k.org.
R484F
R482CF
Dimensions in parentheses are in
millimeters unless otherwise specified.
51
WOLF GAS RANGES
FEATURES
Natural or LP gas models
WOLF
WARRANTY
Wolf products are
covered by a two
and five year
residential warranty
(exclusions apply).
See warranty
details at the end
of this guide.
Fits standard 24" (610) deep cabinets with zero
clearance for easy installation
Large capacity convection oven(s) with infrared
broiler, porcelain interior, three adjustable racks,
lights and door window
Optional infrared charbroiler, infrared griddle and
French Top configurations
18" (457) oven with porcelain interior and two
adjustable racks on 48" (1219) range
Classic stainless steel exterior finish
Stainless steel drip tray on ball bearing slides
Dual brass burners with automatic reignition at
all settings, 500 Btu/hr (.1 kW) simmer to
16,000 Btu/hr (4.7 kW) high
Adjustable 3" (76) stainless steel legs in front
and rear casters
Full side panels and skirt
Porcelain-coated cast iron top grates
High altitude conversion kits available
Large red control knobs with four position
settings and chrome bezels—optional black
knobs available
CSA certified for US and Canada
G A S R A N G E F E AT U R E S
Model R484CG shown with 5" (127) riser
ACCESSORIES
Optional accessories
are available
through your Wolf
dealer. To obtain
local dealer
information, visit
the Locator section
of our website,
wolfappliance.com.
Porcelain-coated
cast iron top grates
Infrared charbroiler
(optional)
Infrared griddle
(optional)
5" (127) riser
(optional)
Large red
control knobs
Dual brass
burners
Oven light
switch
Burner drip pan
Stainless steel
exterior finish
Oven light switch
Full side panels
and skirt
Pull-out drip tray
18" (457) oven—
48" (1219) range
only
Convection fan
switch
Oven indicator
light
Large capacity
convection oven
ACCESSORIES
Contact your Wolf Dealer
5" (127) and 10" (254) classic
stainless steel risers
Porcelain-coated cast iron
wok grate
20" (508) classic stainless steel
riser with shelf
Porcelain-coated cast iron
S-grates
Classic stainless steel island trim
Hardwood cutting board
Black control knobs*
Additional oven racks
High altitude conversion kit
* Black control knobs are available
at no cost.
52
Griddle indicator
light
WOLF GAS RANGES
PLANNING INFORMATION
ELECTRICAL | GAS REQUIREMENTS
Wolf gas ranges come in 30" (762), 36" (914),
48" (1219) and 60" (1524) widths. Specifications
on the following pages provide overall dimensions, finished rough opening dimensions and
installation specifics for each size of gas range.
We have minimized the information contained
in the illustrations, concentrating on the critical
information you must plan into your installation.
The Wolf gas range requires a 110/120 V
electrical supply to operate the electronic ignition
system. The 6' (1.8 m) power supply cord
provided with the range is equipped with a
3-prong, grounded plug for protection against
shock hazard. The service should have its own
15 amp circuit breaker.
IMPORTANT NOTE: Caution must be used in
planning the proper installation of the Wolf gas
range to avoid fires or damage to adjacent
cabinetry or kitchen equipment. Please follow
the minimum clearances established in the
finished rough opening dimensions. Refer to
specifications on the following pages for your
model.
It is recommended that you use a Wolf Pro
ventilation hood with the Wolf gas range. Refer
to pages 76–85 for Pro ventilation specifications.
IMPORTANT NOTE: A ground fault circuit
interrupter (GFCI) is not recommended and may
cause interruption of operation.
Locate electrical and gas supply within the
shaded area shown in the Installation Specifications illustration for your model.
Wolf gas ranges are designed to operate on
natural gas at 5" (127) WC (water column)
pressure or LP gas at 10" (254) WC pressure.
The maximum gas supply pressure to the regulator should never exceed 14" (356) WC, .5 psi
(3.5 kPa).
H I G H A LT I T U D E
The Wolf gas range
functions up to
6,000' (1828 m) in
altitude without any
adjustment. If the
installation is above
6,000' (1828 m),
contact your Wolf
dealer.
Wolf recommends the use of a 1/2" (13) I.D.
commercial-type flex hose; this is the minimum
size that may be used. All plumbing to the flex
hose must be 3/4" (19) minimum I.D. pipe.
IMPORTANT NOTE: A separate external gas
shut-off valve must be located near the range
in an accessible location.
You must follow all National Electrical Code and
gas regulations. In addition, be aware of local
codes and ordinances when installing your
services.
B U R N E R R AT I N G
Gas Ranges
Surface Burners
16,000 Btu/hr
(4.7 kW) with
500 Btu/hr (.1 kW)
delivered at simmer
Infrared Charbroiler
16,000 Btu/hr
(4.7 kW)
Infrared Griddle
18,000 Btu/hr
(5.3 kW)
Infrared Double
Griddle
(2) 18,000 Btu/hr
(5.3 kW)
French Top
15,000 Btu/hr
(4.4 kW)
Oven Burner (Bake)
30,000 Btu/hr
(8.8 kW)
Infrared Oven Broiler 18,000 Btu/hr
(5.3 kW)
Refer to the specific model requirements
for risers in non-island installations.
Dimensions in parentheses are in
millimeters unless otherwise specified.
53
WOLF GAS RANGES
OVERALL DIMENSIONS
30" (762) Gas Range
S P E C I F I C AT I O N S
28 3/8" (721)
OVERALL DEPTH
27 1/4" (692)
30" (762) Gas Range
Overall Width
30" (762)
9 1/4"
(235)
Overall Height
(to cooking surface) 37" (940)
56 3/4"
(1441)
WITH 20"
RISER
28 3/8" (721)
Overall Depth
Oven Interior Capacity
Overall
3.9 cu ft (110 L)
Usable
3.4 cu ft (96 L)
46 3/4"
(1187)
WITH 10"
RISER
24 1/2" (622)
37" (940)
OVERALL
HEIGHT TO
COOKING
SURFACE
Oven Interior Dim
(W x H x D)
24" x 16 1/2" x 17"
(610 x 419 x 432)
Opening Width
30 1/4" (768)
Electrical Supply
110/120 V AC, 60 Hz
15 amp dedicated circuit
36"
41 3/4"
(914)
(1060)
WITH 5"
RISER
2 1/2"
(64)
Power Cord
6' (1.8 m) 3-prong
Shipping Weight
325 lbs (147 kg)
30" (762)
OVERALL WIDTH
25 1/4" (641)
43 3/8" (1102)
LEGS AND CASTERS ALLOW
1" (25) HEIGHT ADJUSTMENT
Dimensions may vary to +
– 1/8" (3).
MODEL OPTIONS
I N S TA L L AT I O N S P E C I F I C AT I O N S
30" (762) Gas Range
30" (762) Gas Range
Four Surface
Burners
R304
COMBUSTIBLE CONSTRUCTION
Natural gas model listed;
for LP gas add (-LP) to the
model number.
VENTILATION
HOOD
IMPORTANT NOTE: A
minimum 5" (127) riser is
required when installing a
30" (762) gas range against
a combustible surface.
13"max
(330)
CABINET
DEPTH
30"min (762)
COUNTERTOP
TO COMBUSTIBLE
CONSTRUCTION
30"(762) TO 36"(914)
6"min
COUNTERTOP
TO BOTTOM OF
VENTILATION HOOD
(152)
TO
COMBUSTIBLE
MATERIALS
18"min (457)
TO
COUNTERTOP
6"min
(152)
TO
COMBUSTIBLE
MATERIALS
COOKING
SURFACE
37"
301/4" (768)
FINISHED ROUGH
OPENING WIDTH
I N S TA L L AT I O N
10"
12"
(254)
(305)
8"
(203)
E
(940)
36"
(914)
2"
(51)
Refer to the installation
instructions shipped with
each Wolf product for
detailed specifications.
54
51/2"
(140)
G
12"
5"
(127) LOCATION OF GAS SUPPLY EXTENDS 3" (76) ON
FLOOR FROM BACK WALL
ISLAND INSTALLATIONS: 12" (305) MINIMUM CLEARANCE FROM BACK
OF RANGE TO COMBUSTIBLE REAR WALL ABOVE COUNTERTOP –
0" (0) TO NON-COMBUSTIBLE MATERIALS
(305)
3"
(76)
WOLF GAS RANGES
OVERALL DIMENSIONS
36" (914) Gas Ranges
S P E C I F I C AT I O N S
28 3/8" (721)
OVERALL DEPTH
27 1/4" (692)
36" (914) Gas Ranges
Overall Width
9 1/4"
(235)
56 3/4"
(1441)
WITH 20"
RISER
24 1/2" (622)
Oven Interior Capacity
Overall
4.9 cu ft (139 L)
Usable
4.3 cu ft (122 L)
46 3/4"
41 3/4"
(914)
(1060)
WITH 5"
RISER
Oven Interior Dim
(W x H x D)
30" x 16 1/2" x 17"
(762 x 419 x 432)
Opening Width
36 1/4" (921)
Electrical Supply
110/120 V AC, 60 Hz
15 amp dedicated circuit
Power Cord
6' (1.8 m) 3-prong
Shipping Weight
445–470 lbs
(202–213 kg)
2 1/2"
(64)
25 1/4" (641)
36" (914)
OVERALL WIDTH
28 3/8" (721)
Overall Depth
(1187)
WITH 10"
RISER
36"
37" (940)
OVERALL
HEIGHT TO
COOKING
SURFACE
36" (914)
Overall Height
(to cooking surface) 37" (940)
43 3/8" (1102)
LEGS AND CASTERS ALLOW
1" (25) HEIGHT ADJUSTMENT
Dimensions may vary to +
– 1/8" (3).
I N S TA L L AT I O N S P E C I F I C AT I O N S
MODEL OPTIONS
36" (914) Gas Ranges
36" (914) Gas Ranges
Six Surface
Burners
COMBUSTIBLE CONSTRUCTION
R366
Four Surface Burners
with Charbroiler
R364C
with Griddle
R364G
VENTILATION
HOOD
13"max
(330)
CABINET
DEPTH
30"min (762)
COUNTERTOP
TO COMBUSTIBLE
CONSTRUCTION
IMPORTANT NOTE: A
minimum 5" (127) riser is
required when installing a gas
range against a combustible
surface. A minimum 10" (254)
riser is required when
installing a gas range with a
charbroiler or griddle against
a combustible surface.
36"min (914) 30"(762) TO 36"(914)
6"min
(152)
TO
COMBUSTIBLE
MATERIALS
FOR
CHARBROILER
COUNTERTOP
TO BOTTOM OF
VENTILATION HOOD
18"min (457)
TO
COUNTERTOP
6"min
(152)
TO
COMBUSTIBLE
MATERIALS
COOKING
SURFACE
37"
361/4" (921)
FINISHED ROUGH OPENING WIDTH
10"
12"
(254)
(305)
8"
(203)
Natural gas models listed;
for LP gas add (-LP) to the
model number.
(940)
36"
(914)
E
2"
(51)
51/2"
(140)
G
12"
5"
(127) LOCATION OF GAS SUPPLY EXTENDS 3" (76) ON
FLOOR FROM BACK WALL
ISLAND INSTALLATIONS: 12" (305) MINIMUM CLEARANCE FROM BACK
OF RANGE TO COMBUSTIBLE REAR WALL ABOVE COUNTERTOP –
0" (0) TO NON-COMBUSTIBLE MATERIALS
(305)
Dimensions in parentheses are in
millimeters unless otherwise specified.
3"
(76)
55
WOLF GAS RANGES
OVERALL DIMENSIONS
48" (1219) Gas Ranges
S P E C I F I C AT I O N S
28 3/8" (721)
OVERALL DEPTH
27 1/4" (692)
48" (1219) Gas Ranges
Overall Width
48" (1219)
9 1/4"
(235)
Overall Height
(to cooking surface) 37" (940)
56 3/4"
(1441)
WITH 20"
RISER
28 3/8" (721)
Overall Depth
Large Oven Interior Capacity
Overall
3.9 cu ft (110 L)
Usable
3.4 cu ft (96 L)
Interior Dimensions
(W x H x D)
37" (940)
OVERALL
HEIGHT TO
COOKING
SURFACE
24" x 16 1/2" x 17"
(610 x 419 x 432)
Small Oven Interior Capacity
Overall
2.4 cu ft (68 L)
Usable
1.7 cu ft (48 L)
Interior Dimensions
(W x H x D)
13 1/2" x 16 1/2" x 17"
(343 x 419 x 432)
Opening Width
48 1/4" (1226)
Electrical Supply
110/120 V AC, 60 Hz
15 amp dedicated
circuit
Power Cord
6' (1.8 m) 3-prong
Shipping Weight
650–750 lbs
(295–340 kg)
46 3/4"
(1187)
WITH 10"
RISER
24 1/2" (622)
36"
41 3/4"
(914)
(1060)
WITH 5"
RISER
2 1/2"
(64)
25 1/4" (641)
48" (1219)
OVERALL WIDTH
43 3/8" (1102)
LEGS AND CASTERS ALLOW
1" (25) HEIGHT ADJUSTMENT
Dimensions may vary to +
– 1/8" (3).
I N S TA L L AT I O N S P E C I F I C AT I O N S
48" (1219) Gas Ranges
MODEL OPTIONS
48" (1219) Gas Ranges
COMBUSTIBLE CONSTRUCTION
Eight Surface
Burners
R488
Six Surface Burners
with Charbroiler
R486C
with Griddle
R486G
VENTILATION HOOD
13"max
(330)
CABINET
DEPTH
Four Surface Burners
with Charbroiler
and Griddle
30"min (762)
COUNTERTOP
TO COMBUSTIBLE
CONSTRUCTION
R484CG
with Double
Griddle
R484DG
with French Top
R484F
6"min
36"min (914)
(152)
TO
COMBUSTIBLE
MATERIALS
FOR CHARBROILER
30"(762) TO 36"(914)
COUNTERTOP TO
BOTTOM OF
VENTILATION HOOD
18"min (457)
TO
COUNTERTOP
6"min
(152)
TO
COMBUSTIBLE
MATERIALS
COOKING
SURFACE
Two Surface Burners
with Charbroiler
and French Top
R482CF
Natural gas models listed;
for LP gas add (-LP) to the
model number.
IMPORTANT NOTE: A
minimum 5" (127) riser is
required when installing a gas
range against a combustible
surface. A minimum 10" (254)
riser is required when
installing a gas range with a
charbroiler or griddle against
a combustible surface.
56
37"
481/4" (1226)
FINISHED ROUGH OPENING WIDTH
26"
12"
(660)
(305)
8"
(203)
(940)
36"
(914)
E
2"
(51)
51/2"
(140)
G
12"
(305)
ISLAND INSTALLATIONS: 12" (305) MINIMUM CLEARANCE FROM BACK
OF RANGE TO COMBUSTIBLE REAR WALL ABOVE COUNTERTOP –
0" (0) TO NON-COMBUSTIBLE MATERIALS
5"
(127) LOCATION OF GAS SUPPLY EXTENDS 3" (76) ON
FLOOR FROM BACK WALL
3"
(76)
WOLF GAS RANGES
OVERALL DIMENSIONS
60" (1524) Gas Ranges
S P E C I F I C AT I O N S
28 3/8" (721)
OVERALL DEPTH
27 1/4" (692)
60" (1524) Gas Ranges
Overall Width
9 1/4"
(235)
56 3/4"
(1441)
WITH 20"
RISER
24 1/2" (622)
37" (940)
OVERALL
HEIGHT TO
COOKING
SURFACE
36"
Overall Depth
(1060)
WITH 5"
RISER
Oven Interior Dim
(W x H x D)
24" x 16 1/2" x 17"
(610 x 419 x 432)
Opening Width
60 1/4" (1530)
Electrical Supply
110/120 V AC, 60 Hz
15 amp dedicated
circuit
Power Cord
6' (1.8 m) 3-prong
Shipping Weight
875–950 lbs
(397–431 kg)
2 1/2"
(64)
25 1/4" (641)
60" (1524)
OVERALL WIDTH
28 3/8" (721)
Oven Interior Capacity (per oven)
Overall
3.9 cu ft (110 L)
Usable
3.4 cu ft (96 L)
46 3/4"
(1187)
WITH 10"
RISER
41 3/4"
(914)
60" (1524)
Overall Height
(to cooking surface) 37" (940)
43 3/8" (1102)
LEGS AND CASTERS ALLOW
1" (25) HEIGHT ADJUSTMENT
Dimensions may vary to +
– 1/8" (3).
I N S TA L L AT I O N S P E C I F I C AT I O N S
MODEL OPTIONS
60" (1524) Gas Ranges
60" (1524) Gas Ranges
Six Surface Burners
COMBUSTIBLE CONSTRUCTION
with Double
Griddle
R606DG
with French Top
R606F
with Charbroiler
and Griddle
R606CG
VENTILATION HOOD
13"max
(330)
CABINET
DEPTH
6"min
(152)
TO
COMBUSTIBLE
MATERIALS
44"min (1118)
COUNTERTOP
TO COMBUSTIBLE
CONSTRUCTION
30"(762) TO 36"(914)
COUNTERTOP
TO BOTTOM OF
VENTILATION HOOD
18"min (457)
TO
COUNTERTOP
6"min
(152)
TO
COMBUSTIBLE
MATERIALS
10"
12"
(254)
(305)
8"
(203)
(940)
36"
(914)
2"
(51)
G
12"
(305)
5"
(127) LOCATION OF GAS SUPPLY EXTENDS 3" (76) ON
FLOOR FROM BACK WALL
R604CF
with Griddle
and French Top
R604GF
IMPORTANT NOTE: A
minimum 5" (127) riser is
required when installing a gas
range against a combustible
surface. A minimum 10" (254)
riser is required when
installing a gas range with a
charbroiler or griddle against
a combustible surface.
37"
E
51/2"
(140)
with Charbroiler
and French Top
Natural gas models listed;
for LP gas add (-LP) to the
model number.
COOKING
SURFACE
601/4" (1530)
FINISHED ROUGH OPENING WIDTH
Four Surface Burners
3"
(76)
ISLAND INSTALLATIONS: 12" (305) MINIMUM CLEARANCE FROM BACK
OF RANGE TO COMBUSTIBLE REAR WALL ABOVE COUNTERTOP –
0" (0) TO NON-COMBUSTIBLE MATERIALS
Dimensions in parentheses are in
millimeters unless otherwise specified.
57
WOLF GAS RANGETOPS
WOLF GAS RANGETOPS
If you want to offer a more professional look to
your client’s kitchen and still use a cooktop, look
to the rangetops from Wolf. They offer you that
commercial look but give you flexibility to use the
ovens in other locations in the kitchen. In fact,
the Wolf framed ovens would be a beautiful
complement to these cooking instruments.
T O P C O N F I G U R AT I O N S
Gas Rangetops
RT366
RT488
RT364C
RT486C
RT364G
RT362F
Wolf gas rangetops come in 36" (914) and 48"
(1219) widths. Combined with the top configuration options, the different configurations you can
choose from are numerous. Model numbers
indicate the top configurations: (C) charbroiler,
(G) griddle, (DG) double griddle and (F) French Top.
Choose from two, four, six or eight dual burners
or consider the Wolf exclusive infrared charbroiler,
infrared griddle or French Top for the ultimate in
restaurant cooking in the home.
RT486G
RT484CG
This appliance is certified by
Star-K to meet strict religious
regulations in conjunction with
specific instructions found on
www.star-k.org.
RT484DG
The dual burners can produce 16,000 Btu/hr
(4.7 kW) for professional cooking heat and turn
down to 500 Btu/hr (.1 kW) for those delicate
sauces.
All Wolf gas rangetops come in the classic
stainless steel finish and are shipped with the
distinctive red control knobs. Contact your Wolf
dealer for optional black knobs available at no
cost.
G A S R A N G E T O P F E AT U R E S
RT484F
Model RT484CG shown with island trim
Infrared charbroiler
(optional)
RT482CF
Infrared griddle
(optional)
Porcelain-coated
cast iron top grates
Low-profile
island trim
Dual brass
burners
Stainless steel
exterior finish
ACCESSORIES
Contact your Wolf Dealer
Pull-out drip tray
10 1/2" (267) classic stainless
steel riser
Standard or island trim in classic
stainless steel
Black control knobs*
Porcelain cast iron wok grate
Porcelain cast iron S-grates
Hardwood cutting board
High altitude conversion kit
58
* Black control knobs are available
at no cost.
Large red
control knobs
Griddle indicator
light
WOLF GAS RANGETOPS
FEATURES
PLANNING INFORMATION
Natural or LP gas models
Wolf gas rangetops come in 36" (914) and 48"
(1219) widths. Specifications on the following
pages provide overall dimensions, finished rough
opening dimensions and installation specifics for
each size of gas rangetop. We have minimized
the information contained in the illustrations,
concentrating on the critical information you
must plan into your installation.
Fits standard 24" (610) deep cabinets with zero
clearance for easy installation
Optional infrared charbroiler, infrared griddle
and French Top configurations
Classic stainless steel exterior finish
Dual brass burners with automatic reignition at
all settings, 500 Btu/hr (.1 kW) simmer to 16,000
Btu/hr (4.7 kW) high
Porcelain-coated cast iron top grates
Large red control knobs with four position
settings and chrome bezels—optional black
knobs available
Stainless steel drip tray on ball bearing slides
High altitude conversion kits available
CSA certified for US and Canada
IMPORTANT NOTE: Caution must be used in
planning the proper installation of the Wolf gas
rangetop to avoid fires or damage to adjacent
cabinetry or kitchen equipment. Follow the
minimum clearances established in the finished
rough opening dimensions. Refer to specifications on the following pages for your model.
It is recommended that you use a Wolf Pro
ventilation hood with the Wolf gas rangetop.
Refer to pages 76–85 for Pro ventilation
specifications.
ELECTRICAL | GAS REQUIREMENTS
The Wolf gas rangetop requires a 110/120 V
electrical supply to operate the electronic ignition
system. The 6' (1.8 m) power supply cord
provided with the range is equipped with a
3-prong, grounded plug for protection against
shock hazard. The service should have its own
15 amp circuit breaker.
WOLF
WARRANTY
Wolf products are
covered by a two
and five year
residential warranty
(exclusions apply).
See warranty
details at the end
of this guide.
ACCESSORIES
Optional accessories
are available
through your Wolf
dealer. To obtain
local dealer
information, visit
the Locator section
of our website,
wolfappliance.com.
IMPORTANT NOTE: A ground fault circuit
interrupter (GFCI) is not recommended and may
cause interruption of operation.
Locate electrical and gas supply within the
shaded area shown in the Installation Specifications illustration for your model.
B U R N E R R AT I N G
Gas Rangetops
Surface Burners
16,000 Btu/hr
(4.7 kW) with
500 Btu/hr (.1 kW)
delivered at simmer
Infrared Charbroiler
16,000 Btu/hr
(4.7 kW)
Infrared Griddle
18,000 Btu/hr
(5.3 kW)
Infrared Double
Griddle
(2) 18,000 Btu/hr
(5.3 kW)
French Top
15,000 Btu/hr
(4.4 kW)
Refer to the specific model requirements
for risers in non-island installations.
Dimensions in parentheses are in
millimeters unless otherwise specified.
Wolf gas rangetops are designed to operate on
natural gas at 5" (127) WC (water column)
pressure or LP gas at 10" (254) WC pressure.
The maximum gas supply pressure to the regulator should never exceed 14" (356) WC, .5 psi
(3.5 kPa).
H I G H A LT I T U D E
The Wolf gas
rangetop functions
up to 6,000' (1828
m) in altitude
without any adjustment. If the installation is above 6,000'
(1828 m), contact
your Wolf dealer.
Wolf recommends the use of a 1/2" (13) I.D.
commercial-type flex hose; this is the minimum
size that may be used. All plumbing to the flex
hose must be 3/4" (19) minimum I.D. pipe.
IMPORTANT NOTE: A separate external gas
shut-off valve must be located near the range
in an accessible location.
You must follow all National Electrical Code and
gas regulations. In addition, be aware of local
codes and ordinances when installing your
services.
59
WOLF GAS RANGETOPS
OVERALL DIMENSIONS
36" (914) Gas Rangetops
S P E C I F I C AT I O N S
36" (914) Gas Rangetops
Overall Width
27 1/4" (692)
OVERALL DEPTH
TO KNOBS
36" (914)
(44)
Overall Height
(to cooking surface) 10 1/2" (267)
2 3/4" (70)
20" (508)
27 1/4" (692)
Overall Depth
Opening Width
36 1/4" (921)
Electrical Supply
110/120 V AC, 60 Hz
15 amp dedicated
circuit
Power Cord
6' (1.8 m) 3-prong
Shipping Weight
190–220 lbs
(86–100 kg)
1 3/4"
10 1/2" (267)
OVERALL HEIGHT
TO COOKING
SURFACE
WITH
10 1/2"
RISER
9 1/ 2"
(241)
36" (914)
OVERALL WIDTH
24" (610)
Dimensions may vary to +
– 1/8" (3).
MODEL OPTIONS
I N S TA L L AT I O N S P E C I F I C AT I O N S
36" (914) Gas Rangetops
36" (914) Gas Rangetops
Six Surface
Burners
RT366
COMBUSTIBLE CONSTRUCTION
Four Surface Burners
with Charbroiler
RT364C
with Griddle
RT364G
VENTILATION
HOOD
Two Surface Burners
with French Top
13"max
(330)
CABINET
DEPTH
RT362F
30"min (762)
COUNTERTOP
TO COMBUSTIBLE
CONSTRUCTION
Natural gas models listed;
for LP gas add (-LP) to the
model number.
6"min
IMPORTANT NOTE: A riser
is required for all 36" (914)
models in non-island
applications installed against
a combustible surface.
I N S TA L L AT I O N
Refer to the installation
instructions shipped with
each Wolf product for
detailed specifications.
(152)
TO
COMBUSTIBLE
MATERIALS
36"min (914)
FOR
CHARBROILER
30"(762) TO 36"(914)
COUNTERTOP
TO BOTTOM OF
VENTILATION HOOD
(152)
TO
COMBUSTIBLE
MATERIALS
361/4" (921)
FINISHED ROUGH OPENING WIDTH
3/4" (19) PLATFORM
TOP VIEW
OF PLATFORM
1/2"
(13)
BACK WALL
3"(76)
E G
8" (203)
8" (203)
14"
2 3/4"
(70)
36"max
LOCATE ELECTRICAL
AND GAS SUPPLY
WITHIN SHADED AREA
THROUGH BOTTOM
OF PLATFORM
PENNINSULA INSTALLATIONS: NO SIDE WALL ABOVE COUNTERTOP
3/4" (19) PLATFORM
24" (610)
(356)
ISLAND INSTALLATIONS: 12" (305) MINIMUM CLEARANCE FROM BACK OF RANGETOP
TO COMBUSTIBLE MATERIALS – 0" (0) TO NON-COMBUSTIBLE MATERIALS –
NO SIDE WALL OR REAR WALL ABOVE COUNTERTOP
60
18"min (457)
TO
COUNTERTOP
6"min
(914)
WOLF GAS RANGETOPS
OVERALL DIMENSIONS
48" (1219) Gas Rangetops
S P E C I F I C AT I O N S
48" (1219) Gas Rangetops
27 1/4" (692)
OVERALL DEPTH
TO KNOBS
1 3/4"
Overall Width
(44)
2 3/4" (70)
10 1/2" (267)
OVERALL HEIGHT
TO COOKING
SURFACE
48" (1219)
Overall Height
(to cooking surface) 10 1/2" (267)
20" (508)
WITH
10 1/2"
RISER
9 1/2"
Overall Depth
27 1/4" (692)
Opening Width
48 1/4" (1226)
Electrical Supply
110/120 V AC, 60 Hz
15 amp dedicated
circuit
Power Cord
6' (1.8 m) 3-prong
Shipping Weight
220–280 lbs
(100–127 kg)
(241)
48" (1219)
24" (610)
OVERALL WIDTH
Dimensions may vary to +
– 1/8" (3).
I N S TA L L AT I O N S P E C I F I C AT I O N S
MODEL OPTIONS
48" (1219) Gas Rangetops
48" (1219) Gas Rangetops
Eight Surface
Burners
COMBUSTIBLE CONSTRUCTION
Six Surface Burners
VENTILATION HOOD
(330)
CABINET
DEPTH
30"min (762)
36"min (914)
FOR CHARBROILER
6"min
(152)
TO
COMBUSTIBLE
MATERIALS
with Charbroiler
RT486C
with Griddle
RT486G
Four Surface Burners
13"max
COUNTERTOP
TO COMBUSTIBLE
CONSTRUCTION
RT488
30"(762) TO 36"(914)
COUNTERTOP TO
BOTTOM OF
VENTILATION HOOD
6"min
18"min (457)
(152)
TO
COMBUSTIBLE
MATERIALS
TO
COUNTERTOP
with Charbroiler
and Griddle
RT484CG
with Double
Griddle
RT484DG
with French Top
RT484F
Two Surface Burners
with Charbroiler
and French Top
RT482CF
48 1/4" (1226)
FINISHED ROUGH OPENING WIDTH
3/4" (19) PLATFORM
TOP VIEW
OF PLATFORM
1/2"
3"
(13)
(76)
BACK WALL
E
G
16"
14"
(406)
(356)
2 3/4"
(70)
24" (610)
36"max
LOCATE ELECTRICAL AND
GAS SUPPLY WITHIN
SHADED AREA THROUGH
BOTTOM OF PLATFORM
16"
(406)
3/4" (19) PLATFORM
(914)
Natural gas models listed;
for LP gas add (-LP) to the
model number.
IMPORTANT NOTE: A riser
is required for all 48" (1219)
models in non-island
applications installed against
a combustible surface.
ISLAND INSTALLATIONS: 12" (305) MINIMUM CLEARANCE FROM BACK OF RANGETOP
TO COMBUSTIBLE MATERIALS – 0" (0) TO NON-COMBUSTIBLE MATERIALS –
NO SIDE WALL OR REAR WALL ABOVE COUNTERTOP
PENNINSULA INSTALLATIONS: NO SIDE WALL ABOVE COUNTERTOP
Dimensions in parentheses are in
millimeters unless otherwise specified.
61
WOLF GAS BBQ GRILLS
WOLF
WARRANTY
Two and five year
residential warranty,
along with a limited
lifetime warranty
on the BBQ body
and hood (exclusions
apply). See
warranty details
at the end of this
guide.
WOLF GAS BBQ GRILLS
FEATURES
Cooking to our way of thinking, is every bit as
much a performing art as music or theater. So
here is our logic. When the symphony or the
Shakespeare troupe moves outdoors for the
festival season, the venue is more casual than
usual, but the performance loses nothing in
terms of artistry. Why can’t cooking be the same
way? With Wolf they are.
Natural or LP gas units
Wolf gas BBQ grills are, like their kitchen counterparts, precision instruments.
Optional 16,000 Btu/hr (4.7 kW) step-up cast
iron side burners
Constructed of heavy-duty stainless steel, both
the 36" (914) and 48" (1219) models are available built-in or as a free-standing grill on a cart.
Model numbers followed by (BI) indicate a builtin unit, while (C) indicates that the grill is on a
free-standing cart. Features include a 115-volt
rotisserie, an infrared rear burner for precise,
consistent grilling, and optional side burners.
Cast iron porcelain-coated grill grates
Built-in (BI) or free-standing cart (C) models
Heavy-duty 18-gauge stainless steel construction with classic stainless steel exterior finish
Push-button, battery-powered ignition
Individually-controlled 10,000 Btu/hr (2.9 kW)
burners spaced five inches apart
New redesigned burner radiant plates
115-volt rotisserie motor and infrared rear
rotisserie burner
Two-piece stainless steel hood and handle
LP gas models include gas regulator, hose and
5-gallon (19 L) tank
Heavy-duty locking swivel casters on cart models
Optional insulated liner for built-in applications
Scraper and protective canvas cover included
T O P C O N F I G U R AT I O N S
G A S B B Q G R I L L F E AT U R E S
Gas BBQ Grills
Model BBQ362C shown
Stainless steel
exterior finish
BBQ242BI
BBQ242C
BBQ362BI
Infrared rotisserie
burner
Porcelain-coated
grill grates
Two-piece hood
and handle
Rotisserie motor
Step-up side
burners (optional)
BBQ362C
Gas control
knob
BBQ36BI
BBQ48BI
Pull-out drip tray
Fold down
plate shelf
Ignition button
BBQ36C
BBQ48C
48" (1219)
free-standing cart
(optional)
ACCESSORIES
Contact your Wolf Dealer
Black control knobs*
Insulating liner
62
* Black control knobs are available
at no cost.
WOLF GAS BBQ GRILLS
PLANNING INFORMATION
ELECTRICAL | GAS REQUIREMENTS
It goes without saying that the BBQ grill
mounted on the free-standing cart takes very
little planning from a design perspective.
However, there are provisions you need to take
into account when planning for a built-in
application.
The Wolf gas BBQ grill requires a 110/120 V
electrical supply to operate the rotisserie motor.
The 6' (1.8 m) power supply cord provided with
the grill is equipped with a 3-prong, grounded
plug for protection against shock hazard. The
service should have its own 15 amp circuit
breaker.
When choosing a permanent built-in location for
your Wolf gas BBQ grill, keep the gas lines as
short as possible. Allow for an adequate supply
of fresh air for proper combustion and ventilation. The BBQ grill should not be exposed to the
wind, but never locate the grill in an enclosed
area.
The Wolf gas BBQ grill is designed for easy
placement into a built-in enclosure. For a
combustible enclosure, use the Wolf-approved
insulated jacket and maintain minimum clearances to combustible surfaces. Built-in installations require a deck to support the BBQ grill.
The supporting deck should be level and strong
enough to support 400 lbs (181 kg).
Wolf gas BBQ grills come in 36" (914) and 48"
(1219) widths. Specifications on the following
pages provide overall dimensions, finished rough
opening dimensions and installation specifics for
each size of gas BBQ grill. We have minimized
the information contained in the illustrations,
concentrating on the critical information you
must plan into your installation.
IMPORTANT NOTE: The Wolf gas BBQ grill must
be specified natural or LP gas at the time of
order. The gas type cannot be converted.
IMPORTANT NOTE: A ground fault circuit
interrupter (GFCI) is not recommended and may
cause interruption of operation.
Locate electrical and gas supply within the
shaded area shown in the Installation Specifications illustration for your built-in model.
Wolf gas BBQ grills are designed to operate on
natural gas at 5" (127) WC (water column)
pressure or LP gas at 10" (254) WC pressure.
The maximum gas supply pressure to the regulator should never exceed 14" (356) WC, .5 psi
(3.5 kPa).
ACCESSORIES
Optional accessories
are available
through your Wolf
dealer. To obtain
local dealer
information, visit
the Locator section
of our website,
wolfappliance.com.
Wolf recommends the use of a 1/2" (13) I.D.
commercial-type flex hose; this is the minimum
size that may be used. All plumbing to the flex
hose must be 3/4" (19) minimum I.D. pipe.
IMPORTANT NOTE: A separate external gas
shut-off valve must be located near the range
in an accessible location.
You must follow all National Electrical Code and
gas regulations. In addition, be aware of local
codes and ordinances when installing your
services.
B U R N E R R AT I N G
Gas BBQ Grills
Grill Burners
(per burner)
10,000 Btu/hr
(2.9 kW)
Side Burners
(per burner)
(2) 16,000 Btu/hr
(4.7 kW)
Infrared Burner
8,000 Btu/hr*
(2.3 kW)
Infrared Burner
9,000 Btu/hr
(2.6 kW)
*Models BBQ242BI and BBQ242C only.
Dimensions in parentheses are in
millimeters unless otherwise specified.
63
WOLF GAS BBQ GRILLS
OVERALL DIMENSIONS
36" (914) Gas BBQ Grills
Model BBQ36C shown
S P E C I F I C AT I O N S
30" (762)
OVERALL DEPTH
3
30 /8" (771) WITH HOOD OPEN
36" (914) Gas BBQ Grills
Overall Width
36" (914)
Overall Height
(BI) Models
(C) Models
26" (660)
52 3/4" (1340)
Overall Depth
30" (762)
56 1/2"
Combustible Enclosure
38 1/4" (972)
27 3/4" (705)
Opening Width
Opening Depth
36 1/4" (921)
26 3/4" (679)
Electrical Supply
110/120 V AC, 60 Hz
15 amp dedicated
circuit
Power Cord
6' (1.8 m) 3-prong
Shipping Weight
340–460 lbs
(154–209 kg)
(660)
HEIGHT
OF GRILL
36 1/4" (921)
TO GRILLING
SURFACE
Non-Combustible Enclosure
Opening Width
Opening Depth
26"
(1435)
HEIGHT
WITH
52 3/4" HOOD
(1340) OPEN
OVERALL
HEIGHT
26 3/4"
(680)
HEIGHT
OF CART
6"
(152)
25 5/8" (651)
36" (914)
OVERALL WIDTH
Dimensions may vary to +
– 1/8" (3).
I N S TA L L AT I O N S P E C I F I C AT I O N S
MODEL OPTIONS
36" (914) Gas BBQ Grills
36" (914) Gas BBQ Grills – Built-In (BI) Models
Combustible Enclosure
Built-In Models
with Side Burners BBQ242BI
w/o Side Burners
BBQ36BI
18"
(457) min
38 1/4" (972)
ROUGH OPENING WIDTH
27 3/4" (705)
ROUGH OPENING
DEPTH
18"
(457) min
E
18"
(457) min
Free-Standing Cart Models
with Side Burners BBQ242C
w/o Side Burners
BBQ36C
10 1/2" (267)
LOCATE
ELECTRICAL
OUTLET FOR
ROTISSERIE
ON LEFT SIDE
Natural gas models listed;
for LP gas add (-LP) to the
model number.
ROUGH
OPENING
HEIGHT
ALLOW OPENING
FOR ACCESS
DOOR
10 1/2" (267)
3 1/8"
ROUGH
OPENING
HEIGHT
(79)
3 3/4" (95)
3 1/8"
(79)
CL
2" (51) DIAMETER OPENING
FOR GAS SUPPLY CONNECTION
(BACK WALL LOCATION OR
BOTTOM LOCATION)
2 7/8"
(73)
CL
2" (51) DIAMETER OPENING
FOR GAS SUPPLY CONNECTION
(BOTTOM LOCATION)
36 1/2"max
(927)
COMBUSTIBLE ENCLOSURE
I N S TA L L AT I O N
NOTE: Dimensions include insulated liner.
Refer to the installation
instructions shipped with
each Wolf product for
detailed specifications.
Non-Combustible Enclosure
6"
(152)
min
36 1/4" (921)
ROUGH OPENING WIDTH
6"
26 3/4" (680)
ROUGH OPENING
DEPTH
(152)
min
E
LOCATE
ELECTRICAL
OUTLET FOR
ROTISSERIE
ON LEFT SIDE
9 1/2" (242)
ROUGH
OPENING HEIGHT
ALLOW OPENING
FOR ACCESS
DOOR
ROUGH
OPENING HEIGHT
(54)
(70)
2 1/8"
(54)
CL
2" (51) DIAMETER OPENING
FOR GAS SUPPLY CONNECTION
(BACK WALL LOCATION OR
BOTTOM LOCATION)
NON-COMBUSTIBLE ENCLOSURE
64
9 1/2" (242)
2 1/8"
2 3/4"
3"
(76)
min
36 1/2"max
(927)
1 7/8"
(48)
CL
2" (51) DIAMETER OPENING
FOR GAS SUPPLY CONNECTION
(BOTTOM LOCATION)
WOLF GAS BBQ GRILLS
OVERALL DIMENSIONS
48" (1219) Gas BBQ Grills
Model BBQ362C shown
S P E C I F I C AT I O N S
30" (762)
OVERALL DEPTH
48" (1219) Gas BBQ Grills
30 3/8" (771) WITH HOOD OPEN
36" (914)
56 1/2"
26"
(1435)
HEIGHT
WITH
52 3/4" HOOD
(1340) OPEN
OVERALL
HEIGHT
(660)
HEIGHT
OF GRILL
Overall Width
48" (1219)
Overall Height
(BI) Models
(C) Models
26" (660)
52 3/4" (1340)
Overall Depth
30" (762)
Combustible Enclosure
Opening Width
Opening Depth
36 1/4" (921)
TO GRILLING
SURFACE
Non-Combustible Enclosure
26 3/4"
(680)
HEIGHT
OF CART
6"
Opening Width
Opening Depth
48 1/4" (1226)
26 3/4" (679)
Electrical Supply
110/120 V AC, 60 Hz
15 amp dedicated
circuit
Power Cord
6' (1.8 m) 3-prong
Shipping Weight
525–560 lbs
(238–254 kg)
(152)
25 5/8" (651)
48" (1219)
OVERALL WIDTH
50 1/4" (1276)
27 3/4" (705)
Dimensions may vary to +
– 1/8" (3).
I N S TA L L AT I O N S P E C I F I C AT I O N S
MODEL OPTIONS
48" (1219) Gas BBQ Grills – Built-In (BI) Models
Combustible Enclosure
48" (1219) Gas BBQ Grills
Built-In Models
18"
(457) min
50 1/4" (1276)
ROUGH OPENING WIDTH
27 3/4" (705)
ROUGH OPENING
DEPTH
18"
(457) min
E
with Side Burners BBQ362BI
18"
(457) min
w/o Side Burners
BBQ48BI
Free-Standing Cart Models
10 1/2" (267)
LOCATE
ELECTRICAL
OUTLET FOR
ROTISSERIE
ON LEFT SIDE
10 1/2" (267)
3 1/8"
ROUGH
OPENING
HEIGHT
(79)
3 3/4" (95)
ALLOW OPENING
FOR ACCESS
DOOR
3 1/8"
(79)
CL
2" (51) DIAMETER OPENING
FOR GAS SUPPLY CONNECTION
(BACK WALL LOCATION OR
BOTTOM LOCATION)
with Side Burners BBQ362C
ROUGH
OPENING
HEIGHT
w/o Side Burners
2 7/ 8"
(73)
CL
2" (51) DIAMETER OPENING
FOR GAS SUPPLY CONNECTION
(BOTTOM LOCATION)
36 1/2"max
(927)
BBQ48C
Natural gas models listed;
for LP gas add (-LP) to the
model number.
COMBUSTIBLE ENCLOSURE
NOTE: Dimensions include insulated liner.
Non-Combustible Enclosure
6"
(152)
min
6"
48 1/4" (1226)
ROUGH OPENING WIDTH
26 3/4" (680)
ROUGH OPENING
DEPTH
(152)
min
E
LOCATE
ELECTRICAL
OUTLET FOR
ROTISSERIE
ON LEFT SIDE
9 1/2" (242)
ROUGH
OPENING HEIGHT
ALLOW OPENING
FOR ACCESS
DOOR
9 1/2" (242)
2 1/8"
2 3/4"
ROUGH
OPENING HEIGHT
(54)
(70)
2 1/8"
(54)
CL
2" (51) DIAMETER OPENING
FOR GAS SUPPLY CONNECTION
(BACK WALL LOCATION OR
BOTTOM LOCATION)
3"
(76)
min
36 1/2"max
(927)
1 7/8"
(48)
CL
2" (51) DIAMETER OPENING
FOR GAS SUPPLY CONNECTION
(BOTTOM LOCATION)
NON-COMBUSTIBLE ENCLOSURE
Dimensions in parentheses are in
millimeters unless otherwise specified.
65
WOLF COOKTOP VENTILATION
Model CTWH30
WOLF COOKTOP VENTILATION HOODS
FEATURES
Powerful multi-speed blowers draw odors and
smoke into the five-layer mesh filter. Filters
remove easily for cleaning. The sculpted classic
stainless steel shape not only provides the
power you expect from Wolf, but also the beauty
you have come to appreciate as well.
Classic stainless steel finish
Wolf chimney-style cooktop wall and island
hoods are recommended for use with Wolf
electric and gas cooktops and integrated
modules. For Wolf dual fuel ranges, gas ranges
and rangetops a Pro ventilation hood is
recommended.
Three-speed blower control
Internal or remote blower options
Front-mounted controls with LED indicator
Heavy-duty stainless steel seamless
construction
Variable-speed blowers
Filter clean timer lets you know when the filter
needs cleaning
Delay-off feature automatically turns unit off
Sealed halogen lighting with three settings
Stainless steel filter cover with dishwasher safe
aluminum mesh filter
Model CTWH36
Heat sentry feature automatically turns unit on
when heat is sensed and automatically adjusts
blower speed
Transition with back draft damper included
Fits 8' (2.4 m) to 9' (2.7 m) ceilings—flue
extension to accommodate 10' (3 m) ceilings
is available
Model IH4227
UL listed to US and Canadian safety standards
WOLF
WARRANTY
C O O K T O P V E N T I L AT I O N H O O D F E AT U R E S
Model CTWH36 shown
Wolf products are
covered by a two
and five year
residential warranty
(exclusions apply).
See warranty
details at the end
of this guide.
Classic stainless
steel finish
Seamless
construction
Telescopic chimney
flue extension
Transition with
backdraft damper
Aluminum
mesh filter
Front-mounted
controls
Rating plate
location
Three-speed
blower control
MODEL OPTIONS
Cooktop Ventilation Hoods
Halogen lighting
LED indicators
Wall Hoods
66
30" (762) Width
CTWH30
36" (914) Width
CTWH36
Island Hood
IH4227
WOLF COOKTOP VENTILATION
PLANNING INFORMATION
ELECTRICAL REQUIREMENTS
Chimney-style cooktop wall hoods are 21" (533)
deep and come in 30" (762) and 36" (914)
widths. The island hood is 42" (1067) wide by
27" (686) deep.
Wolf cooktop wall and island hoods require a
separate, grounded 120 V, 60 Hz power supply.
The service should have its own 15 amp circuit
breaker. Placement of the electrical supply is not
critical, as long as you provide a minimum of 12"
(305) of 120 V AC power cable for the wall hood
and 6' (1.8 m) for the island hood.
IMPORTANT NOTE: Wolf cooktop wall and
island hoods are recommended for use with
Wolf electric and gas cooktops along with integrated modules, and should be at least as wide
as the cooking surface. A Pro ventilation hood
must be used with Wolf dual fuel ranges, gas
ranges and rangetops. Refer to pages 76–85 for
Pro ventilation specifications.
Wolf cooktop wall and island hoods come with
a telescopic chimney flue extension that allows
you to reach a ceiling height of 8' (2.4 m) to 9'
(2.7 m) with a finished look. A flue extension to
accommodate 10' (3 m) ceilings is available.
Locate electrical within the shaded area shown
in the Installation Specifications illustration for
your model.
IMPORTANT NOTE: A ground fault circuit
interrupter (GFCI) is not recommended and may
cause interruption of operation.
You must follow all National Electrical Code
regulations. In addition, be aware of local codes
and ordinances when installing your service.
ACCESSORIES
Optional accessories
are available
through your Wolf
dealer. To obtain
local dealer
information, visit
the Locator section
of our website,
wolfappliance.com.
Specifications on the following pages provide
overall dimensions, blower and ducting considerations, and installation specifics for cooktop
wall and island hoods. We have minimized the
information contained in the illustrations,
concentrating on the critical information you
must plan into your installation. Also refer to
the cooktop ventilation recommendations on
page 86.
Installation of the cooktop wall or island hood
should be 24" (610) to 30" (762) from the
bottom of the hood to the countertop.
ACCESSORIES
Contact your Wolf Dealer
Flue extension to accommodate
10' (3 m) ceilings
30" (762) and 36" (914) wall
shields*
*Wall hoods only.
Dimensions in parentheses are in
millimeters unless otherwise specified.
67
WOLF COOKTOP VENTILATION
OVERALL DIMENSIONS
Cooktop Wall Hoods
Model CTWH30
S P E C I F I C AT I O N S
Model CTWH30
18"
12"
(457)
(305)
4 1/2" min
Overall Width
30" (762)
Overall Height
(excluding chimney)
6 7/ 8"
Overall Height
(including chimney)
30 1/2" (775)
Maximum Height
(full extension)
48 1/2" (1232)
Overall Depth
21" (533)
Bottom of Hood
to Countertop
24" (610) to 30" (762)
Duct Size
8" (203) Round
Discharge
Vertical
Blower Options*
450 CFM Internal
600, 900, 1200 or
1500 CFM Remote
(114)
(175)
30 1/2" TO 48 1/2"
19 1/8"
(775 – 1232)
OVERALL HEIGHT
(486)
6"
(152)
6 7/8"
(175)
30" (762)
OVERALL WIDTH
21" (533)
OVERALL DEPTH
1 9/16"
(40)
Model CTWH36
18"
12"
(457)
(305)
4 5/16" min
(110)
Electrical Supply
110 / 120 V AC, 60 Hz
15 amp dedicated circuit
Shipping Weight
(shell only)
85 lbs (39 kg)
32 11/16" TO 50 7/8"
19 1/8"
(830 – 1292)
OVERALL HEIGHT
(486)
8 11/16"
(221)
*Refer to the cooktop ventilation
recommendations on page 86.
9 1/4"
(235)
35 7/16" (900)
OVERALL WIDTH
21" (533)
OVERALL DEPTH
1 9/16"
(40)
S P E C I F I C AT I O N S
Model CTWH36
I N S TA L L AT I O N S P E C I F I C AT I O N S
Cooktop Wall Hoods
Overall Width
35 7/16" (900)
Overall Height
9 1/4" (235)
(excluding chimney)
Overall Height
(including chimney)
32 11/16" (830)
Maximum Height
(full extension)
50 7/8" (1292)
Overall Depth
21" (533)
Bottom of Hood
to Countertop
24" (610) to 30" (762)
Duct Size
8" (203) Round
Discharge
Vertical
481/2" OR 507/8"
301/2" OR 3211/16"
(1232 or 1292)
MAXIMUM
HEIGHT OF HOOD
6"
(152)
4"(102)
30" OR 357/16"
21"
(533)
Blower Options*
600 or 900 CFM Internal
600, 900, 1200 or
1500 CFM Remote
Electrical Supply
110 / 120 V AC, 60 Hz
15 amp dedicated circuit
Shipping Weight
(shell only)
100 lbs (45 kg)
(775 or 830)
MINIMUM
HEIGHT OF HOOD
E
(762 or 900)
8' TO 9'
24" TO 30"*
(2.4 m – 2.7 m)
FLOOR TO
CEILING HEIGHT
(610 – 762)
TO
COUNTERTOP
*Refer to the cooktop ventilation
recommendations on page 86.
68
*8' (2.4 m) ceilings will not allow for a 30" (762) maximum height above the countertop. Based on a 36" (914) high countertop, an 8' (2.4 m) ceiling
will allow for a maximum height above the countertop of 29 1/2" (749) for Model CTWH30 and 27 5/16" (694) for Model CTWH36.
WOLF COOKTOP VENTILATION
OVERALL DIMENSIONS
Cooktop Island Hood
S P E C I F I C AT I O N S
18"
12"
(457)
(305)
Model IH4227
5" min
(127)
33 9/16" TO 47 1/16"
19 5/16"
(853 - 1195)
OVERALL HEIGHT
(491)
Overall Width
9 1/4"
(235)
42" (1067)
OVERALL WIDTH
27" (686)
1 9/16"
OVERALL DEPTH
(40)
42" (1067)
Overall Height
9 1/4" (235)
(excluding chimney)
I N S TA L L AT I O N S P E C I F I C AT I O N S
Overall Height
(including chimney)
33 9/16" (853)
Maximum Height
(full extension)
47 1/16" (1195)
Overall Depth
27" (686)
Bottom of Hood
to Countertop
24" (610) to 30" (762)
Duct Size
8" (203) Round
Discharge
Vertical
Blower Options*
600 or 900 CFM Internal
600, 900, 1200 or
1500 CFM Remote
Electrical Supply
110 / 120 V AC, 60 Hz
15 amp dedicated circuit
Shipping Weight
(shell only)
110 lbs (50 kg)
Cooktop Island Hood
*Refer to the cooktop ventilation
recommendations on page 86.
471/16" (1195)
MAXIMUM
HEIGHT OF HOOD
339/16" (853)
MINIMUM
HEIGHT OF HOOD
I N S TA L L AT I O N
27" (686)
42" (1067)
8' TO 9'
(2.4 m – 2.7 m)
FLOOR TO
CEILING HEIGHT
24" TO 30"
(610 – 762)
TO
COUNTERTOP
LOCATION OF ELECTRICAL
ON CEILING THROUGH
TOP OF HOOD
Refer to the installation instructions
shipped with each
Wolf product for
detailed specifications.
*8' (2.4 m) ceilings will not allow for a 30" (762) maximum height above the countertop. Based on a 36" (914) high countertop, an 8' (2.4 m) ceiling
will allow for a maximum height above the countertop of 26 7/16" (672).
Dimensions in parentheses are in
millimeters unless otherwise specified.
69
WOLF COOKTOP VENTILATION
BLOWER CONSIDERATIONS
DUCTING CONSIDERATIONS
Wolf cooktop wall and island hoods are shipped
without the blower assembly. Internal or remote
blower assemblies are available. For wall hoods,
the remote blower can be mounted on the roof
or an exterior wall. For island hoods, the remote
blower will be mounted on the roof.
IMPORTANT NOTE: All Wolf ventilation hoods
must be vented to the outside. Use only metal
ductwork.
The blower will vary in size and is dictated by
the cooking surface, the volume of air that needs
to be moved and the length of the duct run. A
straight, short duct run with a limited number of
elbows and transitions will allow the ventilation
hood to perform most efficiently.
A remote mounted blower will minimize the
amount of blower noise, but will not eliminate
the noise completely. All remote blowers will
require a transition to a 10" (254) duct.
Wolf cooktop wall and island hoods have an 8"
(203) round vertical discharge. Ducting can run
through the roof, external wall or eave. Ducting
through an eave requires an internal blower.
Refer to the illustrations below.
Wolf cooktop wall and island hoods will operate
most efficiently when ductwork does not exceed
50' (15 m) in length.
Local building codes may require the use of
make-up air. Consult your local HVAC professional for specific requirements in your area.
Refer to the cooktop ventilation recommendations on page 86.
IMPORTANT NOTE: Install these ventilation
hoods only with a Wolf blower.
D U C T I N G C O N S I D E R AT I O N S
Cooktop Wall Hoods
Cooktop Island Hood
DUCTWORK INSTALLATION
THROUGH ROOF
DUCTWORK INSTALLATION
THROUGH ROOF
ROOF CAP OR REMOTE BLOWER –
TRANSITION FROM 8" (203) TO 10" (254) DUCT
REQUIRED FOR REMOTE BLOWER
ROOF CAP OR REMOTE BLOWER –
TRANSITION FROM 8" (203) TO 10" (254) DUCT
REQUIRED FOR REMOTE BLOWER
8" (203) ROUND DUCT
8" (203) ROUND DUCT
WALL CAP
OR REMOTE BLOWER
CHIMNEY FLUE EXTENSION
TELESCOPIC CHIMNEY FLUE
8" (203) ROUND ELBOW
8" (203) ROUND
ELBOW
CHIMNEY FLUE EXTENSION
DUCTWORK INSTALLATION
THROUGH WALL
8" (203) ROUND ELBOW
8" (203) ROUND DUCT
EAVE VENT
TELESCOPIC CHIMNEY FLUE
8" (203) ROUND
VERTICAL
DISCHARGE
8" (203) ROUND DUCT
8" (203) ROUND
VERTICAL DISCHARGE
6 7/8" (175) OR 91/4" (235)
COOKTOP
WALL HOOD
91/4" (235)
COOKTOP
ISLAND HOOD
24" TO 30"
(686)
21"
24" TO 30"
(610–762)
COUNTERTOP
TO BOTTOM OF
VENTILATION HOOD
70
(535)
27"
(610–762)
COUNTERTOP
TO BOTTOM OF
VENTILATION HOOD
DUCTWORK
INSTALLATION
THROUGH
EAVE –
INTERNAL
BLOWER ONLY
WOLF COOKTOP VENTILATION
WOLF DOWNDRAFT SYSTEMS
FEATURES
The cooktop downdraft unit rises from the
countertop to whisk away odors and smoke into
the easy-to-clean, five-layer mesh filter. The
control module and top cover are available in the
exclusive premium finishes of platinum or
carbon stainless steel, or the standard classic
stainless steel for ease in matching your
cooktop.
Classic, platinum or carbon stainless steel
finishes available on control module and top
cover—Model DD45 available in classic stainless
steel finish only
Wolf downdraft systems come in 30" (762),
36" (914) and 45" (1143) widths and are recommended for use with Wolf framed electric
cooktops, gas cooktops and integrated modules.
Filter clean timer lets you know when the filter
needs cleaning
IMPORTANT NOTE: Wolf downdraft ventilation
systems cannot be used with unframed electric
cooktops and are not recommended for use with
the electric grill, steamer and fryer modules.
Stainless steel filter cover with dishwasher safe
aluminum mesh filter
A Pro ventilation hood must be used with Wolf
dual fuel ranges, gas ranges and rangetops.
Refer to pages 76–85 for Pro ventilation
specifications.
Model DD30
Remote-mounted control module
Internal and remote blower options
Three-speed blower control
Model DD36
Delay-off feature automatically turns unit off
after five minutes, chimney remains up
Model DD45
LED indicators
9-inch (229) chimney elevation
Downdraft control kit, available as a sales
accessory for Models DD30 and DD36 (included
with Model DD45)—includes control module, top
cover, mounting brackets, DIN connector and
mounting hardware
UL listed to US and Canadian safety standards
D O W N D R A F T S Y S T E M F E AT U R E S
MODEL OPTIONS
Model DD36 shown
Downdraft Systems
9" (229) chimney
elevation
Top cover
Three-speed
blower control
WOLF
WARRANTY
(I) Models
500 CFM internal blower included
30" (762) Width
DD30I
36" (914) Width
DD36I
45" (1143) Width
DD45I
Wolf products are
covered by a two
and five year
residential warranty
(exclusions apply).
See warranty
details at the end
of this guide.
(R) Models
Remote blower required
Remote-mounted
control module
Aluminum mesh
filters
Stainless steel
filter covers
Rating plate
location
30" (762) Width
DD30R
36" (914) Width
DD36R
45" (1143) Width
DD45R
CONTROL KIT OPTIONS
Contact your Wolf Dealer
Model DD30I / DD30R
Classic
DD30CONTROL/S
ACCESSORIES
Platinum
DD30CONTROL/P
Contact your Wolf Dealer
Carbon
DD30CONTROL/B
Model DD36I / DD36R
Bracket supports for installation
of two integrated modules with
30" (762) downdraft
Dimensions in parentheses are in
millimeters unless otherwise specified.
Classic
DD36CONTROL/S
Platinum
DD36CONTROL/P
Carbon
DD36CONTROL/B
Control module and top cover have the
stainless steel finish. Control kits also
include mounting brackets, DIN connector
and hardware and are ordered and
shipped as sales accessories for Models
DD30 and DD36. Control kit components
are included with Model DD45.
71
WOLF COOKTOP VENTILATION
PLANNING INFORMATION
Wolf downdraft ventilation systems are available
in 30" (762), 36" (914) and 45" (1143) widths.
The downdraft should be at least as wide as the
cooking surface.
Specifications on the following pages provide
overall dimensions, blower and ducting considerations, and installation specifics for downdraft
ventilation systems. Also refer to the cooktop
ventilation recommendations on page 86.
Downdraft Model DD30 will fit most 30" (762)
wide cabinets, Model DD36 will fit most
36" (914) wide cabinets and Model DD45 will fit
most 45 1/2" (1156) wide cabinets. It is recommended that oversized cabinets be used for
easier installation. Cabinet backs may need to be
removed.
V E N T I L AT I O N
I N S TA L L AT I O N
Refer to the
installation
instructions shipped
with each Wolf
product for detailed
specifications.
If a downdraft system is installed in combination
with two integrated modules, an integrated
module support for downdraft ventilation is
required. Contact your Wolf Dealer for module
support information.
IMPORTANT NOTE: To install a downdraft
system and a Wolf cooktop, you must allow for
a minimum 25 1/8" (638) flat counter space from
front to back. A countertop with a raised lip
and/or backsplash may not allow enough space
for proper installation. 2 3/8" (60) of flat countertop is required behind the cooktop and 1 3/4" (44)
is necessary between the back edge of the
cooktop and inside of cabinet back.
IMPORTANT NOTE: This appliance must be
used with a Wolf-approved control module and
top cover.
The remote-mounted control module is available
as a sales accessory for Models DD30 and DD36
and is included with Model DD45. Installation of
the control module must be within 10' (3 m) of
the downdraft assembly and a minimum of 4"
(102) from the outer edge of cooktop element or
burner. You will be required to drill three holes
and connect the downdraft to the control
module with the provided wire.
OVERALL DIMENSIONS
Downdraft Systems
Models DD30I / DD30R
Models DD36I / DD36R
45 1/2"
36"
30"
(762)
(230)
9 1/16"
26 1/4"
(667)
1 1/2" (38)
DEPTH OF
DOWNDRAFT CHIMNEY
72
(60)
(60)
(60)
9 1/16"
2 3/8"
(1156)
2 3/8"
(914)
2 3/8"
Models DD45I / DD45R
(230)
32 1/4"
(819)
1 1/2" (38)
DEPTH OF
DOWNDRAFT CHIMNEY
9 1/16"
(230)
41 1/4"
(1048)
1 1/2" (38)
DEPTH OF
DOWNDRAFT CHIMNEY
WOLF COOKTOP VENTILATION
I N S TA L L AT I O N S P E C I F I C AT I O N S
Downdraft Systems
S P E C I F I C AT I O N S
Models DD30I / DD30R
25 1/8" min (638)
OF FLAT COUNTERTOP*
1 3/4" min (44)
BACK EDGE
OF COOKTOP
TO INSIDE OF
CABINET BACK*
5/8"
(16)
2 1/2" min
19 1/4" (489)
(64)
WITH NO
RAISED LIP*
COOKTOP CUT-OUT
DEPTH
.344"
2 3/8" (60)
2 1/8" (54)
7 11/16"
(197)
3 1/4"
(83)
29 5/16"
(745)
COUNTERTOP
TO BOTTOM OF
AIR BOX
3 5/8"
36"
(92)
5"
18"
(127)
(457)
(914)
Overall Width
30" (762)
Overall Height
(above countertop)
9 1/16" (230)
Overall Depth
2 3/8" (60)
Duct Size (DD30I)
3 1/4" (83) x 10" (254)
Duct Size (DD30R)
3 1/4" (83) x 14" (356)
Discharge
Adjustable
Blower (DD30I)
500 CFM Internal
Blower Options*
(DD30R)
900, 1200 or 1500 CFM
Remote
Electrical Supply
110 / 120 V AC, 60 Hz
15 amp dedicated circuit
Power Cord
2 1/2' (.8 m) 3-prong
Shipping Weight
75 lbs (34 kg)
S P E C I F I C AT I O N S
7 1/8"
Models DD36I / DD36R
(181)
24" min (610)
CABINET DEPTH
*AREAS OF POTENTIAL INTERFERENCE
2 3/4" (70)
27" (686)
FOR MODEL DD30
33" (838)
25 1/8" min
FOR MODEL DD36
(638)
FLAT
COUNTERTOP
SPACE
42" (1067)
FOR MODEL DD45
19 1/4"
(489)
COOKTOP CUT-OUT
WIDTH
Overall Width
36" (914)
Overall Height
(above countertop)
9 1/16" (230)
Overall Depth
2 3/8" (60)
Duct Size (DD36I)
3 1/4" (83) x 10" (254)
Duct Size (DD36R)
3 1/4" (83) x 14" (356)
Discharge
Adjustable
Blower (DD36I)
500 CFM Internal
Blower Options*
(DD36R)
900, 1200 or 1500 CFM
Remote
Electrical Supply
110 / 120 V AC, 60 Hz
15 amp dedicated circuit
Power Cord
2 1/2' (.8 m) 3-prong
Shipping Weight
80 lbs (36 kg)
2 1/2" min (64)
COUNTERTOP TOP VIEW
S P E C I F I C AT I O N S
Models DD45I / DD45R
Dimensions in parentheses are in
millimeters unless otherwise specified.
Overall Width
45 1/2" (1156)
Overall Height
(above countertop)
9 1/16" (230)
Overall Depth
2 3/8" (60)
Duct Size (DD45I)
3 1/4" (83) x 10" (254)
Duct Size (DD45R)
3 1/4" (83) x 14" (356)
Discharge
Adjustable
Blower (DD45I)
500 CFM Internal
Blower Options*
(DD45R)
900, 1200 or 1500 CFM
Remote
Electrical Supply
110 / 120 V AC, 60 Hz
15 amp dedicated circuit
Power Cord
2 1/2' (.8 m) 3-prong
Shipping Weight
85 lbs (39 kg)
*Refer to the cooktop ventilation
recommendations on page 86.
73
WOLF COOKTOP VENTILATION
ELECTRICAL REQUIREMENTS
BLOWER CONSIDERATIONS
Wolf downdraft ventilation systems require a
separate, grounded 120 V, 60 Hz power supply.
The service should have its own 15 amp circuit
breaker, and a grounded 3-prong receptacle
should be located within the reach of the 2'
(.6 m) power cord. The specific location of the
outlet is not critical, as long as it is within reach
of the power cord that is located mid-way, top
and bottom, on the right side of the downdraft.
Except for Models DD30I, DD36I and DD45I,
which include a 500 cfm internal blower, Wolf
downdrafts are shipped without the blower
assembly. Remote blower assemblies are available. The blower will vary in size and is dictated
by the cooking surface, the volume of air that
needs to be moved and the length of the duct
run. A straight, short duct run with a limited
number of elbows and transitions will allow the
ventilation hood to perform most efficiently.
IMPORTANT NOTE: If Model DD30 is to be
installed in a 30" (762) wide cabinet, Model
DD36 in a 36" (914) wide cabinet or Model DD45
in a 45 1/2" (1156) wide cabinet, the electrical
outlet cannot be located on the back wall of the
cabinet. The outlet may be placed in adjacent
cabinetry.
Locate electrical within the shaded area shown
in the Installation Specifications illustrations.
IMPORTANT NOTE: A ground fault circuit
interrupter (GFCI) is not recommended and may
cause interruption of operation.
You must follow all National Electrical Code
regulations. In addition, be aware of local codes
and ordinances when installing your service.
Wolf downdraft ventilation systems are designed
for use with 31/4" (83) x 10" (254) ductwork for
Models DD30I, DD36I and DD45I, and 31/4" (83)
x 14" (356) ductwork for Models DD30R, DD36R
and DD45R. Each can be transitioned to 8" (203)
or 10" (254) round ductwork.
A remote-mounted blower will minimize the
amount of blower noise, but will not eliminate
the noise completely.
IMPORTANT NOTE: Install this downdraft
system only with a Wolf blower.
Refer to the cooktop ventilation recommendations on page 86.
I N S TA L L AT I O N S P E C I F I C AT I O N S
Location of Electrical Supply
4" min (102)
24 " min (610)
CABINET DEPTH
3 1/2" (89)
E
10" (254)
30" min (762)
FOR MODEL DD30
36" min (914)
FOR MODEL DD36
4 5 1/2" min (1156)
FOR MODEL DD45
74
E
OPTIONAL
ELECTRICAL
LOCATION IN
ADJACENT RIGHT
SIDE CABINET
IMPORTANT NOTE:
Certain installations
may require that the
electrical supply be
placed in an adjacent
cabinet within reach of
the power cord.
Choose the location
shown in the illustration that best suits
your installation.
WOLF COOKTOP VENTILATION
DUCTING CONSIDERATIONS
Wolf downdraft systems have an adjustable
discharge that will allow you to negotiate
ducting around floor joists and other obstacles.
Three different discharge locations are available
with side-to-side adjustment for accurate alignment of ductwork. Refer to the illustration below
for discharge location and adjustment.
Choose the ducting option that allows the
shortest length of ductwork and a minimum
number of elbows and transitions. Refer to the
illustration below for ducting options.
IMPORTANT NOTE: All Wolf ventilation products
must be vented to the outside. Use only metal
ductwork.
I N S TA L L AT I O N
For best performance, 10" (254) round ductwork
is recommended. The downdraft will operate
most efficiently when ductwork does not exceed
40' (12 m) in length.
Refer to the
installation
instructions shipped
with each Wolf
product for detailed
specifications.
D I S C H A R G E L O C AT I O N
DUCTING OPTIONS
Downdraft Systems
Downdraft Systems
163/8" (416)
INTERNAL BLOWER
211/2" (546)
CENTERLINE OF COUNTERTOP CUTOUT
REMOTE BLOWER
10"
ROUND
CL
REMOTE
BLOWER
RIGHT
DISCHARGE
LOCATION
221/8" (562)
INTERNAL BLOWER
19" (483)
REMOTE BLOWER
LEFT
DISCHARGE
LOCATION
51/2" (140)
INTERNAL BLOWER
41/4" (108)
WALL CAP
REMOTE BLOWER
DISCHARGE CUTOUT
DIMENSIONS:
101/4" (260) x 31/2" (89)
12" MIN
TO
GROUND
INTERNAL BLOWER
INTERNAL BLOWER
INSTALLATION THROUGH WALL
141/4" (362) x 31/2" (89)
REMOTE BLOWER
ROOF MOUNT INSTALLATION
REMOTE BLOWER
CENTERLINE OF COUNTERTOP CUTOUT
REMOTE
BLOWER
CL
ADJUSTMENT:
10"
ROUND
1" (25) - 7" (178)
INTERNAL BLOWER
21/2" MAX (165)
REMOTE BLOWER
ADJUSTMENT:
51/2" (140)
5" MAX (127)
REMOTE BLOWER
BOTTOM
DISCHARGE
LOCATION
INTERNAL BLOWER
41/4" (108)
12" MIN
TO
GROUND
12" MIN
TO
GROUND
REMOTE BLOWER
NOTE: Measurements are to centerline of duct cutouts
Dimensions in parentheses are in
millimeters unless otherwise specified.
INTERNAL BLOWER
INSTALLATION THROUGH WALL
REMOTE BLOWER
INSTALLATION THROUGH WALL
75
WOLF PRO VENTILATION
WOLF PRO VENTILATION HOODS
MODEL OPTIONS
Pro Ventilation Hoods
Low-Profile Wall Hood
Low-Profile Wall Hood
(R) Rail Option
24" (610) Wall Hood
Pro Low-Profile Wall Hoods
30" (762) Width
W302210I*
36" (914) Width
W362210
W362210I*
42" (1067) Width
W422210
48" (1219) Width
W482210
Pro 24" (610) Deep Wall Hoods
30" (762) Width
W302418
36" (914) Width
W362418
42" (1067) Width
W422418
48" (1219) Width
W482418
54" (1372) Width
W542418
60" (1524) Width
W602418
66" (1676) Width
W662418
Pro 27" (610) Deep Wall Hoods
24" (610) Wall Hood
(R) Rail Option
30" (762) Width
W302718
36" (914) Width
W362718
42" (1067) Width
W422718
48" (1219) Width
W482718
54" (1372) Width
W542718
60" (1524) Width
W602718
66" (1676) Width
W662718
Pro Island Hoods
27" (686) Wall Hood
36" (914) Width
I363418
42" (1067) Width
I423418
54" (1372) Width
I543418
66" (1676) Width
I663418
*(I) Models include 600 CFM internal blower.
27" (686) Wall Hood
(R) Rail Option
Island Hood
Island Hood
(R) Rail Option
76
Models without decorative rail(s) listed; for
hoods with rail(s) add (R) to the model number.
IMPORTANT NOTE: The low-profile wall hoods
cannot be used with dual fuel ranges, gas
ranges and rangetops with a charbroiler or
griddle. The 24" (610) deep wall hoods are not
recommended for use with dual fuel ranges, gas
ranges and rangetops with a charbroiler or
griddle.
Wolf Pro wall and island hoods provide the
ultimate in ventilation. With standard elements
like heat sentry and dual-setting halogen lighting,
Wolf elevates the need for ventilation to an
enjoyable perk.
The deepest of the Wolf Pro wall hoods, the
27" (686) model provides an additional exclusive
feature—heat lamps. Hosting your dream dinner
party and the warming drawer is already filled?
Not a problem. Turn on your heat lamps and
relax.
Pro wall and island hoods are recommended for
use with all Wolf cooking appliances with the
the following exceptions. The low-profile wall
hoods cannot be used with dual fuel ranges,
gas ranges and rangetops with a charbroiler or
griddle. The 24" (610) deep wall hoods are not
recommended for use with dual fuel ranges,
gas ranges and rangetops with a charbroiler
or griddle.
All Pro wall and island hoods are available in
classic stainless steel. Rail option hoods (R)
come with a classic stainless steel decorative rail
and stand-offs. Optional platinum and brass rails
to match the dual fuel range bezels are available
as sales accessories.
WOLF PRO VENTILATION
FEATURES
Low-profile, 24" (610), 27" (686) deep wall
ventilation hoods in a variety of widths with
classic stainless steel finish
Continually welded seams, hemmed edges and
sides, and hand-finished craftsmanship
Island ventilation hoods in a variety of widths
with classic stainless steel finish
Infinite-speed blower control
Rail option wall hoods (R) come with a classic
stainless steel decorative rail and stand-offs—
optional platinum or brass rail available to
match dual fuel range bezels
Rail option island hoods (R) come with classic
stainless steel decorative rails and stand-offs for
both sides of the hood—optional platinum or
brass rails available to match dual fuel range
bezels
Recessed easy-access controls
Heat sentry feature automatically turns unit on
when heat is sensed and automatically adjusts
blower speed
Halogen lighting with two settings
Heat lamps on 27" (686) deep wall hoods—
two R40 250-watt maximum bulbs required
(bulbs not included)
Removable, easy-to-clean restaurant-grade
stainless steel baffle filters and grease cups
Internal or remote blower options
Transition with backdraft damper included
Heavy-duty 16-gauge brushed stainless steel
construction
UL listed to US and Canadian safety standards
WOLF
WARRANTY
Wolf products are
covered by a two
and five year
residential warranty
(exclusions apply).
See warranty
details at the end
of this guide.
UL approved for covered outdoor applications
Stainless steel enclosed liner
P R O V E N T I L AT I O N H O O D F E AT U R E S
Model W482718R shown
Hand-finished
craftsmanship
Classic stainless
steel finish
Decorative rail –
(R) models
Backdraft
damper
Stainless steel
baffle filters
Recessed easyaccess controls
Welded seams
and hemmed edges
Halogen lighting
Infinite-speed
blower control
ACCESSORIES
Contact your Wolf Dealer
Platinum or brass decorative rails
and stand-offs*
6" (152) and 12" (305) classic
stainless steel duct covers
38" (965) high classic stainless
steel backsplash
38" (965) high classic stainless
steel backsplash with warming
rack
Dimensions in parentheses are in
millimeters unless otherwise specified.
*Accessory not available for every
model.
77
WOLF PRO VENTILATION
ACCESSORIES
Optional accessories
are available
through your Wolf
dealer. To obtain
local dealer
information, visit
the Locator section
of our website,
wolfappliance.com.
PLANNING INFORMATION
ELECTRICAL REQUIREMENTS
Pro low-profile wall hoods are available in 30"
(762), 36" (914), 42" (1067) and 48" (1219)
widths. (I) models include a 600 cfm internal
blower. These hoods cannot be used with dual
fuel ranges, gas ranges and rangetops with a
charbroiler or griddle.
Wolf Pro wall and island hoods require a
separate, grounded 120 V, 60 Hz power supply.
The service should have its own 15 amp circuit
breaker. Placement of the electrical supply is not
critical, as long as you provide a minimum of 6'
(1.8 m) of 120 V AC power cable. Note that for
some wall hoods, placement of the electrical
supply will differ between vertical and horizontal
discharge locations. Refer to pages 83–85 for
blower and ducting considerations to determine
discharge location.
Pro 24" (610) deep wall hoods are available in
30" (762), 36" (914), 42" (1067), 48" (1219),
54" (1372), 60" (1524) and 66" (1676) widths.
These hoods are not recommended for use with
dual fuel ranges, gas ranges and rangetops with
a charbroiler or griddle.
Pro 27" (686) deep wall hoods are available in
30" (762), 36" (914), 42" (1067), 48" (1219), 54"
(1372), 60" (1524) and 66" (1676) widths.
Pro island hoods are available in 36" (914), 42"
(1067), 54" (1372) and 66" (1676) widths.
Specifications on the following pages provide
overall dimensions, blower and ducting considerations, and installation specifics for Pro wall and
island hoods. We have minimized the information contained in the illustrations, concentrating
on the critical information you must plan into
your installation. Also refer to the Pro ventilation
recommendations on pages 87–90.
The overall dimensions illustrations include the
optional rail dimensions. Overall width, height
and depth dimensions will remain the same if a
decorative rail is not to be used.
Pro wall hoods should be at least as wide as
the cooking surface; an overlap of 3" (76) on
either side is recommended. Island hoods should
always be larger than the cooking surface by a
minimum of 3" (76) on each side.
Installation of all Pro wall and island hoods
should be 30" (762) to 36" (914) from the
bottom of the hood to the countertop.
Optional classic stainless steel duct covers are
available in heights of 6" (152) and 12" (305) for
all Pro wall and island hoods.
78
Locate electrical within the shaded area shown
in the Installation Specifications illustration for
your model.
IMPORTANT NOTE: A ground fault circuit
interrupter (GFCI) is not recommended and may
cause interruption of operation.
You must follow all National Electrical Code
regulations. In addition, be aware of local codes
and ordinances when installing your service.
WOLF PRO VENTILATION
OVERALL DIMENSIONS
S P E C I F I C AT I O N S
Pro Low-Profile Wall Hoods
Pro Low-Profile Wall Hoods
12"
(305)
4"(102)
3/4" (19)
DIAMETER
OF RAIL
10"(254)
OVERALL
HEIGHT
22" (559)
OVERALL DEPTH
OVERALL WIDTH
2"
(51)
Pro 24" (610) Deep Wall Hoods
12"
(305)
3/4" (19)
DIAMETER
OF RAIL
18"(457)
OVERALL
HEIGHT
4"(102)
30" (762)
36" (914)
36" (914)
42" (1067)
48" (1219)
Overall Height
10" (254)
Overall Depth
22" (559) excluding rail
Bottom of Hood
to Countertop
30" (762) to 36" (914)
Duct Size
8" (203) Round
Discharge
Vertical or Horizontal
Internal Blower**
600 CFM
Remote Blowers**
600 or 900 CFM
Electrical Supply
110 / 120 V AC, 60 Hz
15 amp dedicated circuit
Shipping Weight
(shell only)
39–55 lbs (18–25 kg)
2"
24" (610)
OVERALL DEPTH
OVERALL WIDTH
Overall Width
W302210I*
W362210
W362210I*
W422210
W482210
(51)
*Models W302210I and W362210I include
a 600 CFM internal blower and are vertical
discharge only.
Pro 27" (686) Deep Wall Hoods
12"
(305)
**Blower options vary with the size of hood
and cooking surface. Refer to the Pro ventilation
recommendations on pages 87–90.
3/4" (19)
DIAMETER
OF RAIL
18"(457)
OVERALL
HEIGHT
4"(102)
S P E C I F I C AT I O N S
Pro 24" (610) Deep Wall Hoods
27" (686)
OVERALL DEPTH
OVERALL WIDTH
2"
(51)
Pro Island Hoods
TOP WIDTH
13"
SUBTRACT 18" (457) FROM OVERALL WIDTH
(330)
3/4" (19)
DIAMETER
OF RAIL
18" (457)
OVERALL
HEIGHT
4"(102)
OVERALL WIDTH
2"
34" (864)
2"
(51)
OVERALL DEPTH
(51)
Overall Width
W302418
W362418
W422418
W482418
W542418
W602418
W662418
30" (762)
36" (914)
42" (1067)
48" (1219)
54" (1372)
60" (1524)
66" (1676)
Overall Height
18" (457)
Overall Depth
24" (610) excluding rail
Bottom of Hood
to Countertop
30" (762) to 36" (914)
Duct Size
10" (254) Round
Discharge
Vertical or Horizontal
Internal Blowers*
600, 900 or 1200 CFM
Remote Blowers*
600, 900, 1200 or
1500 CFM
Electrical Supply
110 / 120 V AC, 60 Hz
15 amp dedicated circuit
Shipping Weight
(shell only)
67–126 lbs (30–57 kg)
Dimensions may vary to +
– 1/8" (3).
*Blower options vary with the size of hood
and cooking surface. Refer to the Pro ventilation
recommendations on pages 87–90.
Dimensions in parentheses are in
millimeters unless otherwise specified.
NOTE: The 900 CFM internal blower is vertical
discharge only.
79
WOLF PRO VENTILATION
I N S TA L L AT I O N S P E C I F I C AT I O N S
Pro Wall Hoods
S P E C I F I C AT I O N S
Pro 27" (686) Deep Wall Hoods
LOCATION OF
ELECTRICAL FOR
6"
VERTICAL DISCHARGE (152)
Overall Width
W302718
W362718
W422718
W482718
W542718
W602718
W662718
30" (762)
36" (914)
42" (1067)
48" (1219)
54" (1372)
60" (1524)
66" (1676)
Overall Height
18" (457)
Overall Depth
27" (686) excluding rail
E
6"
(152)
LOCATION OF
ELECTRICAL FOR
HORIZONTAL DISCHARGE
5"
(127)
30" (762) to 36" (914)
Duct Size
10" (254) Round
Discharge
Vertical
Internal Blowers*
600, 900 or 1200 CFM
Remote Blowers*
600, 900, 1200 or
1500 CFM
Electrical Supply
110 / 120 V AC, 60 Hz
15 amp dedicated
circuit
Shipping Weight
(shell only)
69–128 lbs (31–58 kg)
*Blower options vary with the size of hood
and cooking surface. Refer to the Pro ventilation
recommendations on pages 87–90.
(127)
10" (254)
18" (457)
HEIGHT
OF HOOD
WIDTH OF HOOD
30" TO 36"
(762–914)
TO COUNTERTOP
Bottom of Hood
to Countertop
E
5"
30" TO 36"
(762–914)
TO COUNTERTOP
22" (559)
24" (610)
27" (686)
DEPTH OF HOOD
I N S TA L L AT I O N S P E C I F I C AT I O N S
Pro Island Hoods
LOCATION OF ELECTRICAL SUPPLY
CENTERED THROUGH TOP OF HOOD
S P E C I F I C AT I O N S
Pro Island Hoods
18" (457)
HEIGHT
OF HOOD
Overall Width
I363418
I423418
I543418
I663418
36" (914)
42" (1067)
54" (1372)
66" (1676)
Overall Height
18" (457)
Overall Depth
34" (864) excluding rails
Bottom of Hood
to Countertop
30" (762) to 36" (914)
Duct Size
10" (254) Round
Discharge
Vertical
Internal Blower*
1200 CFM
Remote Blowers*
900, 1200 or 1500 CFM
Electrical Supply
110 / 120 V AC, 60 Hz
15 amp dedicated
circuit
Shipping Weight
(shell only)
95–168 lbs (43–76 kg)
*Blower options vary with the size of hood
and cooking surface. Refer to the Pro ventilation
recommendations on pages 87–90.
30" TO 36"
(762–914)
TO COUNTERTOP
I N S TA L L AT I O N
Refer to the installation
instructions shipped with
each Wolf product for
detailed specifications.
80
34" (864)
DEPTH OF HOOD
WIDTH OF HOOD
30" TO 36"
(762–914)
TO COUNTERTOP
WOLF PRO VENTILATION
WOLF PRO HOOD LINERS
PLANNING INFORMATION
Wolf Pro hood liners allow you to incorporate
superior ventilation within your kitchen design.
Whether you prefer French country or modernist,
the Pro hood liners take care of the interior
design, with true superior ventilation. All you
have to do is decide what it will look like.
Pro hood liners are available to accommodate
30" (762), 36" (914), 42" (1067), 48" (1219),
54" (1372) and 60" (1524) wide hoods. (I)
models include a 600 cfm internal blower.
Sometimes referred to as power packs, these
liners bring all of the controls, lighting and
convenience of our new ventilation line for those
applications with a custom exterior treatment.
Wolf Pro hood liners are recommended for use
with all Wolf cooking appliances except dual
fuel ranges, gas ranges and rangetops with a
charbroiler or griddle. They are available to
accommodate 30" (762), 36" (914), 42" (1067),
48" (1219), 54" (1372) and 60" (1524) wide
hoods.
The ventilation hood should be at least as wide
as the cooking surface. It is recommended that
the hood overlap the cooking surface by 3" (76)
on either side.
Pro Hood Liner
Installation of all Pro hood liners should be
30" (762) to 36" (914) from the bottom of the
decorative hood to the countertop.
ACCESSORIES
The specifications provide overall dimensions
and installation specifics for Pro hood liners.
Refer to pages 83–85 for blower and ducting
considerations and pages 87–90 for Pro
ventilation recommendations.
Optional accessories
are available
through your Wolf
dealer. To obtain
local dealer
information, visit
the Locator section
of our website,
wolfappliance.com.
ELECTRICAL REQUIREMENTS
FEATURES
Stainless steel enclosed liner with seamed
construction
Internal or remote blower options
Recessed easy-access controls
Infinite-speed blower control
Heat sentry feature automatically turns unit on
when heat is sensed and automatically adjusts
blower speed
Halogen lighting with two settings
Removable, easy-to-clean restaurant-grade
stainless steel baffle filters
Transition with backdraft damper included
Wolf Pro hood liners require a separate,
grounded 120 V, 60 Hz power supply. The service
should have its own 15 amp circuit breaker.
Placement of the electrical supply is not critical,
as long as you provide a minimum of 6' (1.8 m)
of 120 V AC power cable.
Locate electrical within the shaded area shown
in the Installation Specifications illustration.
IMPORTANT NOTE: A ground fault circuit
interrupter (GFCI) is not recommended and may
cause interruption of operation.
You must follow all National Electrical Code
regulations. In addition, be aware of local codes
and ordinances when installing your service.
MODEL OPTIONS
Pro Hood Liners
For 30" (762) Hood
L282212I*
ACCESSORIES
For 36" (914) Hood
L342212
Contact your Wolf Dealer
For 42" (1067) Hood
L402212
For 48" (1219) Hood
L462212
For 54" (1372) Hood
L522212
For 60" (1524) Hood
L582212
38" (965) high classic stainless
steel backsplash
38" (965) high classic stainless
steel backsplash with warming
rack
*(I) Model includes 600 CFM internal blower.
Dimensions in parentheses are in
millimeters unless otherwise specified.
81
WOLF PRO VENTILATION
OVERALL DIMENSIONS
S P E C I F I C AT I O N S
Model L282212I
Pro Hood Liners
22 3/8" (568)
Overall Width
L282212I
L342212
L402212
L462212
L522212
L582212
3"
3"
12"
28 3/8" (721)
34 3/8" (873)
40 3/8" (1026)
46 3/8" (1178)
52 3/8" (1330)
58 3/8" (1483)
(76)
(76)
(305)
Overall Height
12" (305)
28 3/8" (721)
OVERALL WIDTH
Overall Depth
22 1/2" (572)
Bottom of Hood
to Countertop
30" (762) to 36" (914)
Duct Size
Discharge
Blower Options*
Electrical Supply
Shipping Weight
(shell only)
8" (203) and 10" (254)
Round
Vertical
12" (305)
OVERALL
HEIGHT
4"(102)
22 1/2" (572)
OVERALL DEPTH
Pro Hood Liners (except Model L282212I)
TOP WIDTH
SUBTRACT 6" (152) FROM OVERALL WIDTH
3"
22 3/8"
3"
(76)
(568)
(76)
1"(25)
12"
(305)
1200 CFM Internal
900, 1200 or 1500 CFM
Remote
12" (305)
OVERALL
HEIGHT
110 / 120 V AC, 60 Hz
15 amp dedicated
circuit
4"(102)
22 1/2" (572)
OVERALL DEPTH
OVERALL WIDTH
39–65 lbs (18–29 kg)
Dimensions may vary to +
– 1/8" (3).
*Blower options vary with the size of hood and
cooking surface. Refer to the Pro ventilation
recommendations on pages 87–90.
I N S TA L L AT I O N S P E C I F I C AT I O N S
Pro Hood Liners
D E C O R AT I V E H O O D
LOCATION OF ELECTRICAL
The height of the liner does not have to be
the same as the height of the decorative
hood and is generally shorter.
The top depth of the liner, which is 12"
(305) standard, must be less than the
interior depth of the decorative hood.
Measure the interior depth of the hood at
the top height of the liner to make sure
the liner will fit inside the decorative hood.
The hood liner comes standard with a 4"
(102) lower reveal. Be sure to include this
dimension in your decorative hood selection.
Always use the interior measurements
of the decorative hood and measure in
multiple places. Use the smallest dimensions to verify hood liner specifications.
82
6"
(152)
A decorative hood can be created out of
wood, plaster, tile or metal. The shape of
the decorative hood is not critical. The only
place where the liner and outside cover
must meet is at the bottom edge of the
metal liner. The decorative hood and liner
must fit at the bottom edge in both width
and depth.
DECORATIVE HOOD
HOOD LINER
E
5"
(127)
DECORATIVE HOOD
12" (305)
HEIGHT OF LINER
HOOD LINER
WIDTH OF LINER
30" TO 36"
(762–914)
TO COUNTERTOP
30" TO 36"
(762–914)
TO COUNTERTOP
221/2" (572)
DEPTH OF LINER
WOLF PRO VENTILATION
BLOWER CONSIDERATIONS
Wall hood Models W302210I and W362210I
come with internal blowers. All other Pro wall
and island hoods are shipped without the blower
assembly. Internal or remote blower assemblies
are available. For Pro wall and island hoods, the
remote blower can be mounted on the roof or an
exterior wall.
Hood liner Model L282212I comes with an
internal blower. All other Pro hood liners are
shipped without the blower assembly. Internal
or remote blower assemblies are available. For
Pro hood liners, the remote blower can be
mounted on the roof or exterior wall.
A straight, short duct run with a limited number
of elbows and transitions will allow the ventilation hood to perform most efficiently. The
Pro wall and island hoods will operate most
efficiently when ductwork does not exceed 50'
(15 m) in length.
A remote mounted blower will minimize the
amount of blower noise, but will not eliminate
the noise completely.
IMPORTANT NOTE: Install this ventilation hood
or hood liner only with a Wolf blower.
Refer to the Pro ventilation recommendations on
pages 87–90.
The blower assemblies are quite varied, and
depending on the amount of air you want to
move and the length of the duct run, you have
many options.
Refer to the illustrations below for ducting
considerations for the Pro low-profile and 24"
(610) deep wall hoods.
D U C T I N G C O N S I D E R AT I O N S
Pro Low-Profile Wall Hoods
Pro 24" (610) Deep Wall Hoods
DUCTWORK INSTALLATION
THROUGH ROOF
DUCTWORK INSTALLATION
THROUGH ROOF
ROOF CAP OR REMOTE BLOWER –
TRANSITION FROM 8" (203) TO 10" (254) DUCT
REQUIRED FOR REMOTE BLOWER
ROOF CAP OR REMOTE BLOWER
8" ROUND DUCT
10" ROUND DUCT
TRANSITION
22 1/4"W x 9"D TO 10" ROUND
10"H (INCLUDING FLANGES)
SOFIT OR CABINET
OR DUCT COVER
10" (254)
HEIGHT OF HOOD
TRANSITION
17 3/4"W x 4 1/4"D TO 8" ROUND
9 3/8"H (INCLUDING FLANGES)
SOFIT OR CABINET
OR DUCT COVER
VERTICAL DISCHARGE
18" (457)
HEIGHT OF HOOD
VERTICAL DISCHARGE
WALL HOOD
WALL CAP
OR REMOTE BLOWER
WALL HOOD
REMOTE BLOWER
22" (559)
DEPTH OF HOOD
30" TO 36"
(762–914)
COUNTERTOP
TO BOTTOM OF
VENTILATION HOOD
DISCHARGE COLLAR
DUCTWORK INSTALLATION
THROUGH WALL
24" (610)
DEPTH OF HOOD
DISCHARGE COLLAR
30" TO 36"
HORIZONTAL
DISCHARGE*
(762–914)
COUNTERTOP
TO BOTTOM OF
VENTILATION HOOD
36" (914)
STANDARD
FLOOR TO
COUNTERTOP
HEIGHT
*HORIZONTAL DISCHARGE APPLICABLE ON LOW-PROFILE WALL HOODS
(EXCLUDING W302210I AND W362210I) USING A REMOTE BLOWER. LOW-PROFILE
WALL HOODS WITH AN INTERNAL BLOWER MUST USE VERTICAL DISCHARGE.
Dimensions in parentheses are in
millimeters unless otherwise specified.
DUCTWORK INSTALLATION
THROUGH WALL
HORIZONTAL
DISCHARGE*
36" (914)
STANDARD
FLOOR TO
COUNTERTOP
HEIGHT
*HORIZONTAL DISCHARGE IS APPLICABLE ON 24" (610) DEEP WALL HOODS
USED WITH WBLOWER-60INT, WBLOWER-120INT OR ANY WOLF REMOTE BLOWER.
WBLOWER-90INT IS NOT FOR USE IN HORIZONTAL DISCHARGE APPLICATIONS.
83
WOLF PRO VENTILATION
DUCTING CONSIDERATIONS
IMPORTANT NOTE: All Wolf ventilation hoods
must be vented to the outside. Use only metal
ductwork.
I N S TA L L AT I O N
Refer to the
installation
instructions shipped
with each Wolf
product for detailed
specifications.
Wolf Pro low-profile and 24" (610) deep wall
hoods have an adjustable discharge location that
can run vertically or horizontally. Horizontal
discharge is applicable on Pro low-profile wall
hoods (excluding Models W302210I and
W362210I) using a remote blower. Horizontal
discharge applicable on Pro 24" (610) hoods
used with WBLOWER-60INT or WBLOWER120INT or any remote blower. WBLOWER-90INT
is not for use in horizontal discharge applications
In a horizontal discharge application, additional
framework may be needed to accommodate
the remote blower. Consult your local HVAC
professional for specific requirements in this
application.
All Wolf Pro 27" (686) deep wall hoods and Pro
island hoods have a vertical discharge location.
Wolf Pro hood liners also have a vertical
discharge location.
Refer to the illustrations below and on the
following page for ducting considerations for the
Pro 27" (686) deep wall hoods, island hoods and
hood liners.
D U C T I N G C O N S I D E R AT I O N S
Pro 27" (686) Deep Wall Hoods
Pro Island Hoods
DUCTWORK INSTALLATION
THROUGH ROOF
DUCTWORK INSTALLATION
THROUGH ROOF
ROOF CAP OR REMOTE BLOWER
ROOF CAP OR REMOTE BLOWER
10" ROUND DUCT
10" ROUND DUCT
TRANSITION
22 1/4"W x 9"D TO 10" ROUND
10"H (INCLUDING FLANGES)
SOFIT OR CABINET
OR DUCT COVER
TRANSITION
141/8"W x 9"D TO 10" ROUND
11"H (INCLUDING FLANGES)
SOFIT, CABINET OR
DUCT COVER
VERTICAL
DISCHARGE
VERTICAL DISCHARGE
18" (457)
HEIGHT OF HOOD
WALL HOOD
27" (686)
DEPTH OF HOOD
ISLAND HOOD
34" (864)
DEPTH OF HOOD
30" TO 36"
30" TO 36"
(762–914)
COUNTERTOP
TO BOTTOM OF
VENTILATION HOOD
(762–914)
COUNTERTOP
TO BOTTOM OF
VENTILATION HOOD
36" (914)
STANDARD
FLOOR TO
COUNTERTOP
HEIGHT
36" (914)
STANDARD
FLOOR TO
COUNTERTOP
HEIGHT
VERTICAL DISCHARGE ONLY FOR 27" (686) DEEP WALL HOODS.
84
18" (457)
HEIGHT OF HOOD
VERTICAL DISCHARGE ONLY FOR ISLAND HOODS.
WOLF PRO VENTILATION
DUCTING CONSIDERATIONS
REMOTE BLOWERS
Pro wall and island hoods and hood liners will
operate most efficiently when ductwork does
not exceed 50' (15 m) in length.
With a few exceptions where internal blowers
are included, Wolf ventilation hoods and downdrafts are shipped without the blower assembly.
Wolf internal and remote blowers are available as
sales accessories through your Wolf dealer.
Local building codes may require the use of
make-up air. Consult your local HVAC professional for specific requirements in your area.
Refer to the Pro ventilation recommendations
on pages 87–90.
Remote blowers can be mounted on the roof or
in some cases, on an exterior wall. Refer to the
illustrations below for dimensions. Installation
instructions shipped with each Wolf ventilation
product provide detailed specifications. These
instructions can also be found on the Wolf
website at wolfappliance.com.
Wolf remote blower Models BLOWER-60REM,
BLOWER-90REM, BLOWER-120REM and
BLOWER-150REM are for use with Wolf cooktop
hoods, downdraft systems and Pro ventilation
hoods and hood liners. Refer to pages 86–90 for
ventilation recommendations.
ACCESSORIES
Optional accessories
are available
through your Wolf
dealer. To obtain
local dealer
information, visit
the Locator section
of our website,
wolfappliance.com.
D U C T I N G C O N S I D E R AT I O N S
Pro Hood Liners
20 3/4"
(527)
28 1/4"
(718)
DUCTWORK INSTALLATION
THROUGH ROOF
10" (254)
Diameter
15 1/2"
24 1/2"
(394)
(622)
ROOF CAP OR REMOTE BLOWER –
TRANSITION FROM 8" (203) TO 10" (254) DUCT
REQUIRED FOR REMOTE BLOWER
8" ROUND DUCT (L282212I)
10" ROUND DUCT (ALL OTHER LINERS)
14"
(356)
TRANSITION
17 3/4"W x 4 1/4"D TO 8" ROUND
9 3/8"H (L282212I)
22 1/4"W x 9"D TO 10" ROUND
10"H (ALL OTHER LINERS)
DIMENSIONS INCLUDE FLANGES
SOFIT OR CABINET
OR DUCT COVER
DECORATIVE HOOD
4 3/4"
24 3/4"
BLOWER-60REM
and BLOWER-90REM
(121)
(629)
VERTICAL DISCHARGE
18" (457)
12" (305)
HOOD LINER
HEIGHT OF LINER
10"
(254)
29 1/2"
(749)
221/2" (572)
DEPTH OF LINER
30" TO 36"
10" (254)
Diameter
14 3/4"
29 1/2"
(375)
(749)
(762–914)
COUNTERTOP
TO BOTTOM OF
DECORATIVE HOOD
10 1/8"
(257)
36" (914)
STANDARD
FLOOR TO
COUNTERTOP
HEIGHT
7 1/4"
22"
BLOWER-120REM
(559)
(184)
21" (533)
10"
(254)
29 1/2"
(749)
10" (254)
Diameter
14 3/4"
29 1/2"
(375)
(749)
VERTICAL DISCHARGE ONLY FOR VENTILATION HOOD LINERS.
10 3/8"
(264)
BLOWER-150REM
Dimensions in parentheses are in
millimeters unless otherwise specified.
25"
7 1/4"
(635)
(184)
85
WOLF VENTILATION RECOMMENDATIONS
COOKTOP VENTILATION CFM RECOMMENDATIONS
Cooktop Hoods and Downdrafts
CTWH30
CTWH36
IH4227
DD30
DD36
DD45
Pro Hoods
Model CT15E
215*
215*
215*
Model CT30E
450
600
600
215*
150*
215*
500
350
Model CT30EU
450
600
600
600
Model CT36E
600
600
Model CT36EU
600
600
CTWH30
CTWH36
IH4227
DD30
Model CT15G
215*
215*
215*
Model CT30G
450
600
600
600
600
CTWH30
CTWH36
IH4227
DD30
Model CT15I
215*
215*
215*
215*
Model IG15
215*
215*
215*
215*
Model IS15
215*
215*
215*
215*
Model IF15
215*
215*
215*
Model IM15
215*
215*
215*
Electric Cooktops
600
500
600
600
CFM
Recommendations
are based on total
Btu/hr output. Wolf
recommends 1 CFM
per 100 Btu/hr
(.03 kW). Additional
CFM may be required
for charbroilers,
griddles and long
duct runs.
DD36
DD45
Pro Hoods
215*
150*
215*
500
350
600
Gas Cooktops
Model CT36G
500
DD36
600
DD45
Pro Hoods
150*
215*
Modules
215*
215*
150*
215*
*Use these requirements to determine total CFM when installing multiple cooktops.
CFM recommendations are based on total Btu/hr output. Wolf recommends 1 CFM per 100 Btu/hr (.03 kW).
Additional CFM may be required for long duct runs.
COOKTOP VENTILATION BLOWER OPTIONS
Cooktop Ventilation Hoods
Blower Description
Blower Number
Cooktop Hood Models
450 CFM Internal
CTBLOWER-45INT (801643)
CTWH30
600 CFM Internal
CTBLOWER-60INT (801644)
CTWH36 / IH4227
900 CFM Internal
CTBLOWER-90INT (801645)
CTWH36 / IH4227
600 CFM Remote
BLOWER-60REM (801640)
CTWH30 / CTWH36 / IH4227
900 CFM Remote
BLOWER-90REM (801641)
CTWH30 / CTWH36 / IH4227
1200 CFM Remote
BLOWER-120REM (801642)
CTWH30 / CTWH36 / IH4227
1500 CFM Remote
BLOWER-150REM (804701)
CTWH30 / CTWH36 / IH4227
Adjustable discharge with 8" (203) round duct for wall hoods, vertical discharge for island hood. Transition is not
required for internal blowers; remote blowers require TRANS-8-10. Backdraft damper included with all hoods.
Downdraft Systems
Blower Description
Blower Number
Downdraft Models
500 CFM Internal
Included with (I) Models
DD30I / DD36I / DD45I
900 CFM Remote
BLOWER-90REM (801641)
DD30R / DD36R / DD45R
1200 CFM Remote
BLOWER-120REM (801642)
DD30R / DD36R / DD45R
BLOWER-150REM (804701)
DD30R / DD36R / DD45R
1500 CFM Remote
3 1/ 4"
Adjustable discharge.
(83) x 10" (254) duct for internal blower, no transition required. 3 1/4" (83) x 14" (254) duct
for remote blowers, TRANS-14-10 required.
Blower configurations are for reference only. Please refer to minimum CFM recommendations for your specific cooking
product. Always consult a qualified HVAC Engineer for specific applications.
86
WOLF VENTILATION RECOMMENDATIONS
PRO VENTILATION CFM RECOMMENDATIONS
Pro Wall Hoods
Low-Profile
DF304 / R304
W302210I W362210(I) W422210 W482210
600
600
DF366 / R366 / RT366
900
900
DF364 / R364 / RT364
900
900
RT362
900
900
DF484 / R484 / RT484
900
R482 / RT482
900
NOTE: Do not use Pro low-profile wall hoods with Wolf dual fuel range, gas range or gas rangetop models with a
charbroiler or griddle.
24" (610) Deep
DF304 / R304
W302418 W362418 W422418 W482418 W542418 W602418 W662418
600
600
DF366 / R366 / RT366
900
900
DF364 / R364 / RT364
900
900
RT362
900
900
R488 / RT488
1100
1100
DF486 / R486 / RT486
1100
1100
DF484 / R484 / RT484
1100
1100
R482 / RT482
1100
1100
DF606 / R606
1500
1500
DF604 / R604
1500
1500
HVAC
Blower configurations
are for reference
only. Please refer to
minimum CFM recommendations for your
specific cooktop or
module. Always
consult a qualified
HVAC Engineer for
specific applications.
NOTE: Pro 24" (610) deep wall hoods are not recommended for use with Wolf dual fuel range, gas range or gas
rangetop models with a charbroiler or griddle.
27" (686) Deep
DF304 / R304
W302718 W362718 W422718 W482718 W542718 W602718 W662718
600
600
DF366 / R366 / RT366
900
900
DF364 / R364 / RT364
900
900
RT362
900
900
R488 / RT488
1100
1100
DF486 / R486 / RT486
1100
1100
DF484 / R484 / RT484
1100
1100
R482 / RT482
1100
1100
DF606 / R606
1500
1500
DF604 / R604
1500
1500
Model numbers for dual fuel ranges, gas ranges and rangetops indicate width and number of surface burners.
Features such as a charbroiler, griddle and/or French Top will vary.
CFM recommendations are based on total Btu/hr output. Wolf recommends 1 CFM per 100 Btu/hr (.03 kW).
Additional CFM may be required for long duct runs.
Dimensions in parentheses are in
millimeters unless otherwise specified.
87
WOLF VENTILATION RECOMMENDATIONS
PRO VENTILATION CFM RECOMMENDATIONS
Pro Island Hoods
DF304 / R304
CFM
Recommendations
are based on total
Btu/hr output. Wolf
recommends 1 CFM
per 100 Btu/hr
(.03 kW). Additional
CFM may be required
for charbroilers,
griddles and long
duct runs.
I363418
I423418
600
600
DF366 / R366 / RT366
900
DF364 / R364 / RT364
900
RT362
900
I543418
R488 / RT488
1100
DF486 / R486 / RT486
1100
DF484 / R484 / RT484
900
R482 / RT482
900
I663418
DF606 / R606
1500
DF604 / R604
1500
Pro Hood Liners
L282212I
L342212
L402212
DF366 / R366 / RT366
900
900
DF364 / R364 / RT364
900
900
RT362
900
900
DF304 / R304
L462212
L522212
L582212
600
R488 / RT488
1100
1100
DF486 / R486 / RT486
1100
1100
DF484 / R484 / RT484
900
900
R482 / RT482
900
900
DF606 / R606
1500
DF604 / R604
1500
Model numbers for dual fuel ranges, gas ranges and rangetops indicate width and number of surface burners.
Features such as a charbroiler, griddle and/or French Top will vary.
CFM recommendations are based on total Btu/hr output. Wolf recommends 1 CFM per 100 Btu/hr (.03 kW).
Additional CFM may be required for long duct runs.
88
WOLF VENTILATION RECOMMENDATIONS
PRO VENTILATION BLOWER OPTIONS
Pro Low-Profile Wall Hoods
Blower Description
Blower Number
Wall Hood Models
600 CFM Internal*
Included with (I) Models
W302210I / W362210I
600 CFM Internal*
WBLOWER-60INT (807614)
W362210 / W422210
600 CFM Remote
BLOWER-60REM (801640)
W362210 / W422210 / W482210
900 CFM Remote
BLOWER-90REM (801641)
W362210 / W422210 / W482210
*Vertical discharge with 8" (203) round duct. Remote blowers are adjustable discharge with 8" (203) round duct.
NOTE: Do not use Pro low-profile wall hoods with Wolf range or rangetop models with a charbroiler or griddle.
Pro 24" (610) Deep Wall Hoods
Blower Description
Blower Number
Wall Hood Models
600 CFM Internal
WBLOWER-60INT (807614)
W302418 / W362418 / W422418
900 CFM Internal*
WBLOWER-90INT (805086)
W302418 / W362418 / W422418
1200 CFM Internal
WBLOWER-120INT (804702)
W482418 / W542418 / W602418 / W662418
600 CFM Remote
BLOWER-60REM (801640)
W302418
900 CFM Remote
BLOWER-90REM (801641)
1200 CFM Remote
BLOWER-120REM (801642)
W302418 / W362418 / W422418 / W482418 / W542418
All 24" (610) Deep Wall Hoods
1500 CFM Remote
BLOWER-150REM (804701)
All 24" (610) Deep Wall Hoods
HVAC
Blower configurations
are for reference
only. Please refer to
minimum CFM recommendations for your
specific cooktop or
module. Always
consult a qualified
HVAC Engineer for
specific applications.
*Vertical discharge with 10" (254) round duct. All other blowers are adjustable discharge with 10" (254) round duct.
NOTE: Pro 24" (610) deep wall hoods are not recommended for use with Wolf range or rangetop models with a
charbroiler or griddle.
Pro 27" (686) Deep Wall Hoods
Blower Description
Blower Number
Wall Hood Models
600 CFM Internal
WBLOWER-60INT (807614)
W302718 / W362718 / W422718
900 CFM Internal
WBLOWER-90INT (805086)
W302718 / W362718 / W422718
1200 CFM Internal
WBLOWER-120INT (804702)
W482718 / W542718 / W602718 / W662718
600 CFM Remote
BLOWER-60REM (801640)
W302718
900 CFM Remote
BLOWER-90REM (801641)
1200 CFM Remote
BLOWER-120REM (801642)
W302718 / W362718 / W422718 / W482718 / W542718
All 27" (686) Deep Wall Hoods
1500 CFM Remote
BLOWER-150REM (804701)
All 27" (686) Deep Wall Hoods
Vertical discharge with 10" (254) round duct.
Wall hood models without decorative rail(s) listed; blower options are the same for (R) models. Transition with backdraft damper included with all wall hoods. Blower configurations are for reference only. Please refer to minimum CFM
recommendations for your specific cooking product. Always consult a qualified HVAC Engineer for specific applications.
Dimensions in parentheses are in
millimeters unless otherwise specified.
89
WOLF VENTILATION RECOMMENDATIONS
PRO VENTILATION BLOWER OPTIONS
Pro Island Hoods
Blower Description
1200 CFM Internal
Blower Number
Island Hood Models
IBLOWER-120INT (804703)
All Island Hoods
900 CFM Remote
BLOWER-90REM (801641)
I363418 / I423418 / I543418
1200 CFM Remote
BLOWER-120REM (801642)
All Island Hoods
1500 CFM Remote
BLOWER-150REM (804701)
All Island Hoods
Vertical discharge with 10" (254) round duct. Models without decorative rail(s) listed; blower options are the same for
(R) models.
HVAC
Blower configurations
are for reference
only. Please refer to
minimum CFM recommendations for your
specific cooktop or
module. Always
consult a qualified
HVAC Engineer for
specific applications.
Pro Hood Liners
Blower Description
Blower Number
600 CFM Internal*
Included with (I) Model
L282212I
LBLOWER-120INT (805087)
All Hood Liners (except L282212I)
1200 CFM Internal
Hood Liner Models
900 CFM Remote
BLOWER-90REM (801641)
All Hood Liners (except L282212I)
1200 CFM Remote
BLOWER-120REM (801642)
All Hood Liners (except L282212I)
1500 CFM Remote
BLOWER-150REM (804701)
All Hood Liners (except L282212I)
*Vertical discharge with 8" (203) round duct. All other blowers are vertical discharge with 10" (254) round duct.
Transition with backdraft damper included with island hoods and hood liners.
Blower configurations are for reference only. Please refer to minimum CFM recommendations for your specific cooking
product. Always consult a qualified HVAC Engineer for specific applications.
90
Dimensions in parentheses are in
millimeters unless otherwise specified.
WOLF APPLIANCE PRODUCTS
LIMITED WARRANTY
RESIDENTIAL USE ONLY
FULL TWO YEAR WARRANTY*
For two years from the date of original installation, your Wolf Appliance product warranty covers all
parts and labor to repair or replace any part of the product that proves to be defective in materials
or workmanship. All service provided by Wolf Appliance Company under the above warranty must
be performed by a Wolf Appliance authorized service center, unless otherwise specified by Wolf
Appliance Company. Service will be provided in the home during normal business hours.
LIMITED THIRD THROUGH FIFTH YEAR WARRANTY
From the third through fifth year from the date of original installation, Wolf Appliance Company will
repair or replace the following parts that prove to be defective in materials or workmanship. Labor to
remove and replace defective parts is not covered. Wolf Appliance Company recommends that you
use a Wolf Appliance authorized service center to perform such service.
Gas Burners (excluding appearance), Electric Heating Elements, Blower Motors (vent hoods),
Electronic Control Boards, Magnetron Tubes and Induction Generators
LIMITED LIFETIME WARRANTY
For the life of the product, Wolf Appliance Company will repair or replace any BBQ body or BBQ hood
that rusts through due to defective material or workmanship. Labor to remove and replace defective
parts is not covered. Wolf Appliance Company recommends that you use a Wolf Appliance authorized service center to perform such service.
TERMS APPLICABLE TO EACH WARRANTY
The warranty applies only to products installed for normal residential use. The warranty applies only
to products installed in any one of the fifty states of the United States, the District of Columbia or
the ten provinces of Canada. This warranty does not cover any parts or labor to correct any defect
caused by negligence, accident or improper use, maintenance, installation, service or repair.
THE REMEDIES DESCRIBED ABOVE FOR EACH WARRANTY ARE THE ONLY ONES THAT WOLF
APPLIANCE COMPANY, LLC WILL PROVIDE, EITHER UNDER THIS WARRANTY OR UNDER ANY
WARRANTY ARISING BY OPERATION OF LAW. WOLF APPLIANCE COMPANY, LLC WILL NOT BE
RESPONSIBLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING FROM THE
BREACH OF THIS WARRANTY OR ANY OTHER WARRANTY, WHETHER EXPRESS, IMPLIED OR
STATUTORY.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and
you may also have other legal rights that vary from state to state.
To receive parts and/or service and the name of the Wolf Appliance authorized service center
nearest you, contact Wolf Appliance Company, LLC, P. O. Box 44848, Madison, Wisconsin 53744;
check the Locator section of our website, wolfappliance.com, or call 800-332-9513.
* Stainless Steel (classic, platinum and carbon) doors, panels and product frames are covered by a
limited 60 day parts and labor warranty for cosmetic defects.
91
W O L F A P P L I A N C E C O M PA N Y, L L C
808255
1 / 2006
P. O. B OX 4 4 8 4 8
MADISON, WI 53744
800-332-9513
W O L FA P P L I A N C E . C O M