call: 800-356-5844 LAB.GRUPPEN E-SERIES

COMMERCIAL AMPLIFIERS / MIXER AMPLIFIERS
LAB.GRUPPEN E-SERIES POWER AMPLIFIERS
Designed for ease of installation, these EnergyStar™ 2.1-compliant power amplifiers provide sonic performance and high
power density in a single rack space. They feature a patented
IDEEA output stage based on Class ‘D’ topology and new Rail
Sensing Limiter (RSL) that optimizes output for various load
conditions. Asymmetric loading allows “mixing and matching” of loads with varying impedances for maximum system
t h bl per channel),
h
l) Ph
i tterminals,
i l andd signal-based
ig l b d auto-power-off/-power-on.
t
ff/
efficiency. Other notable features are 50Hz high-pass filter (switchable
Phoenix
Comprehensive circuit protection and fault indication also included.
ITEM
(ST/CH) 2Ω
4Ω
8Ω
16Ω
PRICE
E4:2...............................................200W ......................... 200W .....................................100W .........................................50W.............................................................................................. CALL
E8:2...............................................400W ......................... 400W .....................................200W .......................................100W.............................................................................................. CALL
E12:2.............................................600W ......................... 600W .....................................300W .......................................150W.............................................................................................. CALL
PEAVEY ARCHITECTURAL
UMA™ SERIES MIXER/
AMPLIFIERS All models
include one module port (for any single-space MMA™ Series mixer modules). Has
rear panel level control for modules, 1 balanced mic/telephone input (for paging), 1
balanced mic/line input, 2 balanced line inputs, a non-mutable balanced output, a 4Ω
direct output, and 8Ω , 70V, and 100V transformer-balanced power outputs. Each unit
also operates using up to 5 input channels total. Rack ears are included for optional
mounting. Also sports a priority/muting system with internal signal override, external
switch closure capability, and threshold control.
ITEM
DESCRIPTION
PRICE
UMA352..................... 35W mixer/amp ........................................................................... 355.81
UMA752..................... 75W mixer/amp ........................................................................... 439.11
UMA1502................... 150W mixer/amp ......................................................................... 638.00
PEAVEY ARCHITECTURAL MMA SERIES MODULAR 9-CHANNEL MIXER/
AMPS All models include 8 module ports configurable for use with plug-in mixer
modules, a dedicated program input (Channel 9), SPS™ speaker protection circuitry, bass and treble controls, 2 independent mute buses, a selectable low-cut
filter, and external volume control capability. All models can handle 70V, 25V, 8Ω,
and 4Ω loads. The MMA™ 8752 and MMA™ 81502 can also handle 100V export
loads. Includes rack ears for optional rackmouting (2RU).
ITEM
DESCRIPTION
PRICE
MMA8752 .......75W RMS, 120V 9-channel mixer/amp ................................................... 474.81
MMA81502 .....150W RMS, 120/240V 9-channel mixer/amp .......................................... 534.31
MMA Series Plug-In Mixer Modules (all single-space except PEQM)
AUX-2 .............Line level input module with RCA/screw terminal connector .................... 44.63
AUX-SR...........Line level input module w/ext. remote control, screw terminal connector. 49.73
BTM-S ............Transformer-balanced line level input module ......................................... 81.92
MPE-S3 ..........Mic preamp module with screw terminal connector, phantom power ....... 44.75
MPT-S2 ..........Transformer-balanced mic/line input module
with screw terminal connector, phantom power, EQ ................................. 67.42
MPT-X2 ..........Mic preamp module with transformer-balanced input,
24 VDC phantom power ............................................................................ 54.80
OPM ...............Output module with Euro-style input connector........................................ 54.80
PEQM .............2-space, 3-band parametric EQ module with +/-15dB boost/cut,
4 octave band freq. sweep, 120 dB dynamic range, 2 reconfigurable
inputs & outputs, RCA line in/thru, Euro-style input ................................ 54.80
SEM ................Signal enhancement preamp module with vocal clarity enhancement,
bass filter, RCA in & out ........................................................................... 54.80
TMP-AUTO ......Transformer mic preamp with balanced mic level input,
adjustable gate threshold, selectable phantom power and phase inversion,
Euro-style input ........................................................................................ 67.42
TPM-S2 ..........Telephone paging mic preamp module with transformer-balanced
input, preamp gain & low cut filter, Euro-style input ............................... 67.42
Visit fullcompass.com today!
BEHRINGER EUROCOM MA SERIES MIXER-AMPLIFIERS These products
integrate extensive signal routing, high-efficiency electronics and low-noise design
into an aesthetically appealing design. All models offer priority muting, dedicated
paging input, remote control as well as record and Zone 2 outputs. MA6000M and
MA6018 add 2-band EQ per input, direct outputs, and automatic mixing as well as the
ability to link multiple units for easy system expansion. The MA400M and MA6000M
are mixers only, ideal for installations where amplification is already available.
ITEM
DESCRIPTION
PRICE
MA4008 ..................... Mixer/amplifier, 50W, 8 inputs, 70V and 4Ω .............................. 473.99
MA4000M .................. Mixer only, 8 inputs ..................................................................... 338.99
MA6018 ..................... Mixer/amplifier, 180W, 12 inputs, 70V and 4Ω .......................... 764.99
MA6000M .................. Mixer only, 12 inputs ................................................................... 560.99
BEHRINGER EUROCOM SN SERIES MIXER-AMPLIFIERS These powerful yet
compact mixer-amplifiers offer a wealth of features including Class ‘D’ design and
DC/thermal overload protection. All models offer EQ, voice-activated program muting, 3 mic inputs, terminal strip output and up to 85% energy efficiency courtesy of
the quiet and efficient switch-mode power supply. The SN2204, SN2208, SN2404 and
SN2408 feature extra I/O options, phantom power, as well as the ability to operate
70V/100V and 4Ω loads simultaneously.
ITEM
DESCRIPTION
PRICE
SN2104 ..................... Mixer-amplifier, 40W .......................................................................CALL
SN2108 ..................... As above, with 80W ..................................................................... 237.99
SN2204 ..................... Dual mixer-amp, XLR/TRS connectors, 40W ....................................CALL
SN2208 ..................... As above, with 80W .........................................................................CALL
SN2404 ..................... Dual mixer-amp, XLR/TRS connectors,
paging input, preamp out, 40W ......................................................CALL
SN2408 ..................... As above, with 80W ..................................................................... 372.99
For expert advice - call: 800-356-5844
M-F: 9:00-5:30 Central
139
140
COMMERCIAL AMPLIFIERS / MIXER AMPLIFIERS
ATLAS SOUND TSD SERIES
POWER AMPLIFIERS TSD “Time
Saving Device” power amplifiers feature rear-panel balanced Phoenix-style
connectors, front panel gain control,
peak/signal/power LEDs, and removable
knobs – which allows for easy installaTSD-PA122G
tion of the included front panel security
cover. Models TSD-PA122G and TSD-PA252G are stereo, and provide 12W/channel at
4Ω (24W bridged mono at 8Ω) and 25W/channel at 4Ω (50W bridged mono at 8Ω)
respectively, as well as providing unbalanced RCA inputs. Model TSD-PA10VG is mono
and will drive up to (8) 25/70/100V speakers (tapped @ 1W ea.), while the mono TSDPA20VG will drive up to (16) 25/70/100V speakers.
EV PA SERIES AMPLIFIERS These compact rackmount power amps are designed
for public address and paging/background music with 3-pin Phoenix-style balanced
inputs. All models can be bridged in multi-channel models.
ITEM
CHANNELS
8Ω
4Ω
100V
70V
PRICE
PA2450L................. 2 ............. 200W ..............450W ............... N/A................ N/A ........... 662.00
PA4150L................. 4 ............... 75W ..............150W ............... N/A................ N/A ........... 774.00
PA2400T................. 2 ............. 200W ..............400W ............400W............. 400W ......... 1008.00
PA2250T................. 2 ............. 125W ..............250W ............250W............. 250W ........... 795.00
PA1250T................. 1 .................N/A .................N/A ............250W............. 250W ........... 584.00
ITEM
DESCRIPTION
(ST/CH) 4Ω
8Ω BRIDGED
PRICE
TSD-PA122G.........Stereo power amplifier ................12W ......................24W .................. 170.50
TSD-PA252G.........Stereo power amplifier ................25W ......................50W .................. 215.50
TSD-PA10VG.........10W, 25/70/100V mono power amplifier ........................................... 120.50
TSD-PA20VG.........20W, 25/70/100V mono power amplifier ........................................... 181.50
ATLAS SOUND AA SERIES MIXER
AMPLIFIERS This line is designed for
commercial audio applications. The AA35 is
a 3-input mixer amp for distributed paging and background music (BGM) systems,
and where music on hold (MOH) paging is
required. The AA35 has 1 mic in with phantom
power on a phoenix connector, 2 stereo line
AA35
inputs, and dual line outputs. A dipswitch
selectable matrix allows the creation of a zone 2 mix from any or all of the input
sources for MOH applications. 25V, 70.7V and 8Ω outputs are provided. The AA60
is a 60W version of the AA35. The AA120 is a 120W mixer amp with 6 input channels
(5-mic/line with phantom, and 1 stereo aux input). It also has a unique bridge in/out
feature to combine multiple amps in ballroom applications without need for external
relays and preamp out/power amp in for patching external processors. The AA240
shares the same preamp section as the AA120 but has 240W of power. The AA120M
shares the bridge I/O, and VCA features of the AA120 but has 4 mic inputs, 1 stereo
line (BGM) input, and room for one optional module card input. It has input trim
control on each channel, and a separate zone 2/3 matrix per channel. VCA control is
assignable to Ch5 BGM input or main mix bus.
ITEM
DESCRIPTION
PRICE
AA35.......................... 35W 3-input mixer amp .............................................................. 223.50
AA60.......................... 60W 3-input mixer amp .............................................................. 314.50
AA120........................ 120W 6-input mixer amp ............................................................ 516.50
AA240........................ 240W 6-input mixer amp ............................................................ 728.50
AA120M ..................... 120W 6-input mixer amp with module input............................... 569.50
AAIT600..................... 600Ω isolation input transformer for AA series ............................ 40.58
AARMK2-0 ................. Optional rack kit for AA120, AA240 or AA120M ............................. 27.41
AARMK2-5 ................. Optional rack kit for AA35 ............................................................. 31.41
AAVCC5 ..................... 5-piece security cover kit for all AA series amps ............................ 6.86
AASMG....................... Optional sound masking module for AA120M only ........................ 97.50
AAML ......................... Optional mic/line input module with VCA for AA120M only ........... 66.50
AATG.......................... Optional tone/chime module for AA120M only ............................... 70.50
CP700
ATLAS SOUND POWER AMPS
The PA601 is for distributed background music systems where music
on hold or advanced mix functionality
is not required. It features 60W of
power at 4Ω or 70.7V in a compact
PA601
package with rear mounted RCA I/O. A unique loudness contour control provides the right amount of
low frequency enhancement for low level listening
environments. The CP400 and CP700 are dual-channel, professional grade power amps for demanding
contractor applications. Both feature esoteric-grade
torioidal output transformers and separate power supplies drive the 2 independent
channels to ensure maximum channel separation and low distortion. Inputs are XLR
and terminal blocks.
ITEM
DESCRIPTION
PRICE
PA601 ....................... 60W @ 70.7C, 60W @ 4Ω (direct coupled mode) ...................... 299.50
CP400 ....................... 200W @ 70.7V, 240W/channel @ 4Ω (direct coupled mode) ..... 602.50
CP700 ....................... 350W @ 70.7V, 400W/channel @ 4Ω (direct coupled mode) ..... 728.50
Follow us!
NEW!
INTER-M AMERICAS INC.
MA-U SERIES
MIXER-AMPLIFIERS
These mixer/amplifiers are ideal
for a variety of applications including education, fitness, retail and hospitality. All
models include a digital portable media player that plays MP3/WMA/WAV audio files,
distributed to up to 5 speaker zones, either independently or all zones simultaneously.
The switch mode power supply guarantees that these Class 'D' amps deliver high output with low power consumption while the 5-band EQ and VCA remote master volume
ensure audio quality. Other features include front panel Chime & Siren with external
trigger, external mute and telephone paging input, front panel USB connector for flash
drives, 10-segment LED meter and front-panel 1/8" jack for auxiliary sound sources.
ITEM
DESCRIPTION
PRICE
MA-206USB ............... 60W @ 4Ω, LOW-Z, 100V, 70V 6-input mixer/amplifier ............. 481.75
MA-212USB ............... 120W @ 4Ω, LOW-Z, 100V, 70V 6-input mixer/amplifier ........... 526.56
MA-224USB ............... 240W @ 4Ω, LOW-Z, 100V, 70V 6-input mixer/amplifier .......... 566.88
NEW!
INTER-M AMERICAS INC
6300 SERIES COMMERCIAL POWER AMPLIFIERS These rugged and reliable
3RU amps are flexible and powerful enough for almost any installed sound application,
such as sound reinforcement, background music or paging. The onboard 400Hz high
pass filter and rear panel -12dB gain trim pot protect both the amplifier and the speakers from equipment-damaging transients, while the front-panel LED meter allows for
visual tracking of output levels. These extremely reliable amps offer a comprehensive
thermal/electrical protection circuit and also feature thermistor-protected output and
quiet multi-stage fans. All models operate at either 4/8Ω or 70/100V, and offer a 95dB
signal-to-noise ratio and less than 1% THD.
ITEM
DESCRIPTION
PRICE
PA-6312 .................... 120W, 4/8Ω or 70/100V power amplifier .................................... 429.50
PA-6324 .................... As above, 240W version .............................................................. 481.75
PA-6336 .................... As above, 360W version .............................................................. 535.50
PA-6348 .................... As above, 480W version .............................................................. 680.13
NEXKON RA1060 DIGITAL
MIXING P.A. AMPLIFIER This
compact mixing amp has frontpanel volume control for each
of 3 aux/line inputs, located on
rear of unit. Mic input and gain
controls for both mic channels (2nd mic input on back), as well as master volume,
treble and bass controls are also located on the front. Also features rock, pop, classic, jazz and normal effects, with LED indicators for each on front.
ITEM
DESCRIPTION
PRICE
RA1060 ..................... Digital mixing PA amp ................................................................ 130.90
Our Sales Pros will provide you with the solutions you need.
142
COMMERCIAL AMPLIFIERS / MIXER AMPLIFIERS
CC SERIES
NEW!
MIXER AMPLIFIERS
Each model offers different features, allowing you to
choose the model best suited
to your application. These
40-watt
rack-mountable
amplifiers are half the width
of conventional audio equipment, allowing two CC-Series amplifiers to be placed
side-by-side. They are ideal for installations with limited setup space because they
can fit easily in custom equipment racks, lecterns, compact bookshelf audio systems, etc. Features on all models include: Individual volume controls for each input,
priority muting, individual phantom power for MIC inputs, bass/treble controls, REC
output as well as peak, signal, and power indicators All are compatible with 70V,
25V, 4-ohm, and 8-ohm speaker systems. The CC4041 has two inputs; one balanced
XLR mic/line and one RCA L/R input. The CC4041 has four intputs; three balanced
XLR mic/line and one RCA L/R input. The CC4052 has 5 inputs: three balanced XLR
mic/line, one RCA L/R input and one TEL input. The CC4052m has 6 inputs: three
balanced XLR mic/line, one RCA L/R input, one TEL input, a USB input and SD card
slot for media MP3/WMA files.
ITEM
DESCRIPTION
PRICE
CC4021 ..................... 40W, 2-input mixer amp ............................................................. 153.78
CC4041 ..................... 40W, 4-input mixer amp ............................................................. 170.87
CC4052 ..................... 40W, 5-input mixer amp ............................................................. 205.04
CC4052M .................. 40W, 6-input mixer amp with media player ................................ 239.21
180MA
CROWN COMMERCIAL AUDIO AMPS Provide both 4Ω or 8Ω
and constant-voltage outputs (70V and 100V) for use in a wide range
of commercial applications. Easily configured for a range of uses such
as paging, background music, security, and evacuation instructions. Features include
balanced Phoenix-type mic/line inputs, screw-terminal speaker outputs, 4-tone generator, and priority muting.
ITEM
DESCRIPTION
PRICE
Mixer Amplifiers
135MA ....................... 3 inputs into one channel 35W @ 8Ω amplifier ......................... 179.00
160MA ....................... 4 inputs into one channel 60W @ 8Ω amplifier ......................... 289.00
180MA ....................... 4 inputs into one channel 80W @ 4Ω amplifier ......................... 459.00
280MA ....................... 8 inputs into two channel 80W @ 4Ω amplifier ......................... 679.00
1160MA ..................... 4 inputs into one 160W @ 4Ω amplifier..................................... 599.00
Power Amplifier Only versions (without mixer capability)
180A.......................... Single-channel 80W @ 4Ω amplifier.......................................... 369.00
280A.......................... Dual-channel 80W @ 4Ω amplifier ............................................ 499.00
1160A........................ Single-channel 160W @ 4Ω amplifier........................................ 499.00
Mixer Only models, (no power amplifier sections)
14M ........................... 4-input, 1-output mixer with priority muting, Phoenix inputs ..... 339.00
28M ........................... 8-input, 2-output mixer with priority muting, Phoenix inputs ..... 459.00
NEW!
BOGEN GOLD SEAL SERIES 70V MIXER/AMP Features 6 microphone inputs,
2 auxiliary inputs and 1 telephone paging input. XLR connectors are provided for
mics 1-4; RCA jacks are provided for AUX; screw terminals for mics 5 and 6 and
the telephone input. Output taps include: 8Ω, 25V, 25VCT, 70V and 100V, as well as
direct 4Ω, 600Ω out (with accessory transformer), tape out, preamp out/power
amp in, and booster out. They feature the Aphex Aural Exciter (a dual-function
equalizer), phantom power for mics, precedence circuitry, automatic muting on
telephone page, variable muting, vox sensitivity, automatic level control, remote
volume control and low cut filter.
ITEM
DESCRIPTION
PRICE
GS35 ......................... 35W ............................................................................................. 334.36
GS60 ......................... 60W ............................................................................................. 409.96
GS100 ....................... 100W ........................................................................................... 467.28
GS150 ....................... 150W ........................................................................................... 538.02
GS250 ....................... 250W ........................................................................................... 709.20
GSRPK/RK60 ............. 19" rack panel kit (all models)...................................................... 35.56
GSTRC ....................... Tamper resistant cover.................................................................. 30.45
WMT1A ...................... Telephone line matching transformer ........................................... 31.23
BOGEN CLASSIC SERIES The Classic models offer balanced low impedance
mic inputs, a built-in telephone input, a mic precedence circuit and thermal and
electrical circuit breakers for protection from excessive heat and shorted outputs/
overloads. UL and CSA listed.
ITEM
DESCRIPTION
PRICE
C10 ........................... 2 inputs (2 mic or 1 mic/1 aux), 10W ......................................... 160.29
C20 ........................... 2 inputs (2 mic or 1 mic/1aux), 20W........................................... 195.58
C35 ........................... 3 inputs (2 mic/1 aux or 475.861 1 mic/2 aux), 35W.................. 271.11
C60 ........................... 3 inputs (2 mic/1 aux or mic/2 aux), 60W ................................... 352.39
C100 ......................... 3 inputs (2 mic/1 aux or 1 mic/2 aux), 100W.............................. 406.61
Accessory Rack Kit
RPK50 ....................... For C100C, C60C, C35C ................................................................ 43.03
RPK35B ..................... For C20C, C10C ............................................................................. 68.93
Follow us!
JBL CSMA SERIES
MIXER-AMPLIFIERS
These are highly efficient, fanless 1RU
mixer-amplifiers. Available in single
channel and two channel models with four or eight inputs, respectively. The front
panel features volume controls with an illuminated ring for each channel, master
volume adjustment, adjustable bass and treble controls and a power switch. The CSMA
series can drive 8Ω and 4Ω loads and can be used with 70V and 100V distributed audio
systems. In addition to balanced mic/line inputs, unbalanced RCA inputs and speaker
connections, all units include RJ45 connectors for use with JBL CSR-V in-wall volume
controls. All models feature a universal power supply which enables the ability to
accept AC voltages from 100 to 240 VAC, 50/60Hz.
ITEM
DESCRIPTION
PRICE
CSMA-180 ................. 80W, single-channel 4-input mixer-amplifier ............................. 449.00
CSMA-1120 ............... 120W, single-channel 4-input mixer-amplifier ........................... 599.00
CSMA-240 ................. 40W, two-channel 8-input mixer-amplifier ................................. 519.00
CSMA-280 ................. 80W, two-channel 8-input mixer-amplifier ................................. 649.00
CSMA-2120 ............... 120W, two-channel 8-input mixer-amplifier ............................... 739.00
ROLLS CORPORATION MA66 2-ZONE MIXER/AMPLIFIER
This 1RU, 2-zone mixer/amplifier is easy enough for anyone to use, but flexible
enough to fill almost any installation requirement. Seven inputs on (4) RCA, (2) XLR,
(1) 1/8" and 2 zones plus main output ensure there’s plenty of available I/O. This unit
also includes individually switchable phantom power on the two XLR mic inputs, zoneassignable “talk-over” circuit with adjustable ducking release and rear panel phoenix
connectors for remote control. The cool-running Class ‘D’ power amp provides 20W
of output power per zone.
ITEM
DESCRIPTION
PRICE
MA66 ......................... 40W 2-zone mixer/amplifier ........................................................ 277.20
Shop anytime. Buy online. Go to fullcompass.com
COMMERCIAL AMPLIFIERS / MIXER AMPLIFIERS
QSC CMX SERIES
POWER AMPS All models
drive low-impedance loads
down to 2 ohms and have barrier strip, XLR and 1/4" TRS inputs, Speakon™ and terminal block outputs. Other features include recessed and detented 1dB gain controls
with security covers, as well as recessed rear DIP switches. All models can drive 70V
and 100V (CMX300VA is 70V only) systems in bridged mono mode while the 800 and 200
models can drive them in stereo mode (70V only on the 800). The amp section features
Class “AB” and Class “H” architecture, and all models also feature a high-current
toroidal transformer. All models offer DC current protection systems and automatic
current limiting to prevent damage from shorted inputs. All are 2RU tall, except for
the CMX2000VA (3RU tall).
MODEL
8Ω/ST
4Ω/ST
70V/ST DRCT DRIVE 70V DRCT DRIVE/BRGD MONO PRICE
CMX300VA......185W.......... 280W ................. N/A.............................600W...................... 567.00
CMX500VA......260W.......... 400W ................. N/A.............................1200W.................... 716.00
CMX800VA......450W.......... 650W ................. 400W .........................2000W.................... 979.00
CMX2000VA....1050W........ 1600W ............... 2500W .......................5000W.................. 2059.00
QSC ISA SERIES
Available in either low
impedance versions and
25/70/100V versions. Housed ISA450
ISA450 REAR
in a rugged 3-space rackmount chassis, features rear
controls, XLR and Euroblock
inputs and barrier strip for
outputs, selectable high pass
filters and variable speed fan.
The “TI” versions will drive both 4Ω/8Ω loads and high voltage distributed systems
on the same channel simultaneously.
ITEM
8Ω
4Ω
2Ω
70V
PRICE
ISA280 ........................ 185W .................280W.................. 430W ................................... 474.00
ISA300TI ..................... 185W .................280W.................. 430W ...............300W ........... 633.00
ISA450 ........................ 260W .................425W.................. 700W ................................... 574.00
ISA500TI ..................... 260W .................425W.................. 700W ...............500W ........... 731.00
ISA750 ........................ 450W .................650W................ 1200W ................................... 781.00
ISA800TI ..................... 450W .................650W................ 1200W ...............800W ........... 953.00
ISA1350 ...................... 800W ...............1300W................ 2000W .............1500W ......... 1475.00
ROLLS PA202 STEREO 20W/
CHANNEL AMP This lightweight
and compact Class ‘D’ amp has 20W per channel stereo @ 4Ω, and 40W when in
bridge/mono mode @ 8Ω. The Class ‘D’ low-heat design enables it to be mounted
in very tight applications. Works great in ceilings with projectors, or anywhere small
and heat free amplification is required. Has an all-metal chassis and bottom mounts
are provided for permanent installations. It has an included 24VDC IEC laptop-type
external power supply.
ITEM
DESCRIPTION
PRICE
PA202 ....................... Stereo 20W/channel Class ‘D’ amp ............................................. 168.75
RADIO DESIGN LABS
EZ-MXA20 MIXER AMP A stereo
mixer amplifier with (1) XLR mic
input and (2) RCA line inputs. The
front panel has level controls for
each channel as well as bass and
treble controls. It is rated at 10W RMS per channel at with an 8Ω load. Other features include phantom power and switchable speaker impedance (4Ω or 8Ω). The
optional TX-70A interface allows the EZ-MXA20 to be used with 70V systems, while the
TX-J2 can be used to sum stereo output to a single mono channel.
ITEM
DESCRIPTION
PRICE
EZ-MXA20 ................. Mixer/amp, 3-channel, 2x10W ..................................................... 222.56
TX70A ........................ Speaker level input interface ...................................................... 230.76
TXJ2........................... Unbalanced input transformer ...................................................... 56.69
RADIO DESIGN LABS
HD-MA35/35U,
HD-PA35/35U,
HD-RE35U STEREO POWER AMPS All
models feature master volume with remote
adjustment capability, selectable output
impedance, balanced inputs and amplified
outputs on terminal blocks, unbalanced
input and output via RCA jacks, an analog
compressor/ limiter for increased audio
fidelity, and more. HD-MA35U, PA35U, and
RA35U all use an adjustable automatic sleep mode to conserve energy (HD-PA35A
offers manual standby mode); HD-MA35, MA35U, and RA35U also feature manual/
automatic vocal priority ducking. RA35U supports remote control (sold separately)
via RJ45 jack. All models include power supply.
ITEM
DESCRIPTION
PRICE
HD-PA35 ................... 1-input, 35W, low impedance output .......................................... 206.12
HD-PA35A ................. As above, for 25V/70V/100V systems .......................................... 222.56
HD-PA35UA ............... As HD-PA35A, with sleep mode ................................................... 230.76
HD-MA35A ................. 3-input, 35W(zone 1)/2W(zone 2), ducking/muting ..................... 272.63
HD-MA35UA............... 4-input, 35W(zone 1)/4W(zone 2), sleep mode, ducking/muting . 336.41
HD-RA35U ................. 4-input, 35W(zone 1)/4W(zone 2), sleep mode, ducking/muting,
remote controllable ..................................................................... 324.36
HD-RA35UA ............... As above, for 70V/100V systems ................................................. 336.41
DS-RC3M................... Remote audio mixing control with mute function........................ 139.01
RADIO DESIGN LABS EZ-PA20 AND
TX-PA40D STEREO POWER AMPS
EZ-PA40D offers 10W RMS per channel into
8Ω, and 8W RMS per channel into 4Ω. Features
include switch-selectable load impedance,
switch-selectable stereo/mono mode, and integral overload limiter with LED. TX-PA40D offers 20W
RMS per channel into 8Ω (40W total), and 15W RMS per
channel into 4Ω (30W total). Features include switchselectable stereo/mono operation, compressor/limiter,
LED to indicate audio compression threshold, thermal
and short-circuit protection. Includes power cord.
ITEM
DESCRIPTION
PRICE
EZ-PA20 .................... 20W stereo audio power amp with power supply......................... 127.14
TX-PA40D .................. 40W stereo audio power amp with power supply......................... 217.92
PA50B
STEWART AUDIO HALF-RACK AMPS
The AV50-2 has RCA inputs and will accept unbalanced signals (1/4" TRS). The AV25-2
offers RS232 control over volume, as well as music and fire alarm muting. The PA
amps are convection-cooled and provide clean power at a great price. With high
speed switching power supplies, ultra-efficient circuitry and balanced inputs.
AV-50-2
Visit fullcompass.com today!
ITEM
DESCRIPTION
PRICE
AV-25-2..................... Power amp, 25W @ 8Ω/35W @ 4Ω, pole-mountable ................ 179.00
AV-50-2..................... Power amp, 25W @ 8Ω/50W @ 4Ω, pole-mountable ................ 279.00
PA50B ....................... Power amp, 25W @ 8Ω/50W @ 4Ω ........................................... 339.00
RMK50....................... Rackmount kit for AV series, 1RU.................................................. 22.50
AV-POLE .................... AV Series pole mount .................................................................... 14.50
RMK-70-D ................. Rackmount kit for DA series, 2RU ................................................. 30.00
RMK-70-S.................. Rackmount kit for DA series, 1RU ................................................. 22.50
RMK100..................... Rackmount kit for PA series .......................................................... 22.50
For expert advice - call: 800-356-5844
M-F: 9:00-5:30 Central
143
144
COMMERCIAL AMPLIFIERS / MIXER AMPLIFIERS
BG220CU
TOA LINE INPUT AMPS
These are for background music
and general announcement
and ideal for use in bars, retail
stores, and banquet rooms. The
BG220CU REAR
BG-200 series are 3-input mixer
amps and are equipped with
MOH out, permitting 2-channel
broadcast when used in conjunction with the optional BA-200
series power amps. LINE 2/3
outputs equipped with RCA pin
jacks. Removable terminal blocks and rear-mounted DIP switches for fast and easy
installation/setup. Auto Mute sensing control for setting mute activation threshold
and manual mute function. The BA-200 series offers remote master volume control
by using an external volume control, and RCA line input jacks.
ITEM
DESCRIPTION
PRICE
BG220CU........Mixer/amp, 20W, mic/line in, 2 line in, MOH/ZONE 2 out, black, 2RU ........CALL
BG235CU........Mixer/amp, 35W, mic/line in, 2 line in, MOH/ZONE 2 out, black, 2RU ........CALL
BA235CU ........Power amp, 35W, line in, remote volume, black, 2RU .................................CALL
BA260CU ........Power amp, 60W, line in, remote volume, black, 2RU .................................CALL
A724
A724 REAR
TOA 700 SERIES MIXER/AMPS Features include 6-mic/line inputs, 2 auxiliary
line inputs and a 900 Series module port. Speaker outputs consist of 70.7V, 25V and
4Ω. An auxiliary line output can be used for recording or connection to an external
booster amplifier. An Auto-Mute function provides voice-activated priority override
and channel switching. Other features include channel and master volume controls,
bass/treble, processor insert jacks and output level meter. Master volume and
power on/off can also be controlled remotely. Short-circuit and thermal protection
circuitry ensures extended operation. 5-year warranty.
ITEM
DESCRIPTION
PRICE
A706.......................... 60W .................................................................................................CALL
A712.......................... 120W ...............................................................................................CALL
A724.......................... 240W ...............................................................................................CALL
MB25B ...................... Rackmount kit .................................................................................CALL
YA920........................ Volume control security knob ..........................................................CALL
DA250FH
A9060DHM2CU
TOA 9000M2 SERIES MODULAR DIGITAL MATRIX MIXERS/ AMPLIFIERS
These mixer amplifiers provide an all-in-one solution, combining a mixer with DSP
and a 10-band parametric EQ, compressor, 4 priority levels of ducking, power amplification, auto-mixing, 8 module ports, and control options for phone paging and
noise-sensing. Optional modules can be added to maximum of 8 input x 8 outputs.
They accept the same modules used in the original 9000 series as well as some
new modules unique to the M2 series. The 9000M2 series adds new remote-control
functionality, an enhanced GUI interface and improved serial communication.
Programming software is included and the series has a 5-year manufacturer’s warranty.
ITEM
DESCRIPTION/OUTPUTS
PRICE
A9060SM2CU .......(1) 60W @ 25/70V output, 4Ω/8Ω, (1) line level output built in .........CALL
A9120SM2CU .......(1) 120W @ 25/70V output, 4Ω/8Ω, (1) line level output built-in.......CALL
A9240SHM2CU .....(1) 240W @ 70V, (1) line level output built-in .....................................CALL
A9060DHM2CU .....(2) 60W @ 70V output, 300Ω preamp out ...........................................CALL
A9120DHM2CU .....(2) 120W @ 70V output, 300Ω preamp out .........................................CALL
M9000M2CU.........Digital matrix mixer only (no amp)........................................................CALL
D001T...................Dual-mic/line input module with DSP ...................................................CALL
D001R ..................Dual-line input RCA ..............................................................................CALL
T001T ...................Dual-line output expansion model with DSP .........................................CALL
ZP001T.................Telephone DTMF zone paging module ...................................................CALL
C001T...................Input/output control expansion module.................................................CALL
AN001T.................Ambient noise control module ...............................................................CALL
AN9001 ................Ceiling mic for ambient noise control ...................................................CALL
ZM9001 ................Remote switch panel.............................................................................CALL
ZM9002 ................Remote volume switch panel ................................................................CALL
ZM9003 ................Zone manager .......................................................................................CALL
SS9001.................4-zone speaker selector ........................................................................CALL
RC001T ................RS485 control module ...........................................................................CALL
AD246 ..................Power supply for RC001T ......................................................................CALL
ZM9011 ................4 assignable buttons with LED indicators ............................................CALL
ZM9012 ................Assignable volume controller with LED indicators ................................CALL
ZM9013 ................8 assignable buttons with LED indicators ............................................CALL
ZM9014 ................4 assignable buttons + assignable volume control
both with indicators ..............................................................................CALL
BG2120
DA250FH REAR
TOA DA SERIES AMPS Engineered with independent power supplies for each
channel and Class ‘D’ technology, these amplifiers operate at 85% efficiency and
consume almost 1/3 less power than conventional analog amplifiers. A compact,
lightweight (14.6 lbs.) 1RU design and ultra-low heat dissipation allow racking up to
5 units without open space between units. Other features include recessed stepped
attenuators for precise gain calibration, removable dust filters for easy maintenance,
and optional isolation transformer. Input connections are provided via detachable
Euro style terminal block (electrically balanced), and outputs are provided on screw
terminals (M4) that accept 14-22 AWG wire.
MODEL
(PER CH)
8Ω
4Ω
70V
PRICE
DA250FCU ................. 4-channel amp .............170W ............ 250W ............N/A .................CALL
DA250FHCU............... 4-channel amp ................ N/A ................N/A ........ 250W ................CALL
DA500FHLCU ............. 4-channel amp .............550W ................N/A ........ 500W ................CALL
DA550FCU ................. 4-channel amp .............370W ............ 550W ............N/A ................CALL
DA250DCU................. 2-channel amp .............170W ............ 250W ............N/A .................CALL
DA250DHCU .............. 2-channel amp ................ N/A ................N/A ........ 250W .................CALL
Follow us!
BG2120 REAR
TOA BG-2000 SERIES MIXER/AMPS The new BG-2000 Series Mixer/Amplifier
is a total redesign of BG-1000 Series. They feature a newly-engineered chassis,
removable euro-block connectors, assignable MOH/Second Zone source assignment
and access to mute priority and other settings via rear panel DIP switches. A module
slot accepts optional 900 Series plug-in modules for custom system configurations.
A variety of useful muting modes include an Auto-Mute function for voice-activated
paging override of the BGM channels without interrupting the MOH output. Inputs
include Mic, Line 1/Telephone (euro-block), line 2 and line 3 (RCA and euro-block).
Outputs include transformer-isolated 25V and 70V; 4Ω, music-on-hold and line out
(euro-block). UL and cUL listed. 5-year warranty. Optional rackmount available.
ITEM
DESCRIPTION
PRICE
BG2035 ..................... 35W mixer/amp ...............................................................................CALL
BG2060 ..................... 60W mixer/amp ...............................................................................CALL
BG2120 ..................... 120W mixer/amp .............................................................................CALL
MB1000..................... Rackmount for BG series .................................................................CALL
Para asistencia en Español llame al 800-356-5844 x1164 y x1178
COMMERCIAL AMPLIFIERS / MIXER AMPLIFIERS
XMV4280
TOA 900 SERIES COMMERCIAL AMPLIFIERS
The most complete and versatile amplifier line available. All models are modular
and require optional input modules to determine the functionality of each input.
There are 35 different input modules available. All models will operate at either 70V
or 25V, or low impedance. Modules not included.
XMV4280 REAR
A912MK2
A912MK2 REAR
TOA A900 SERIES MIXER AMPS These modular mixer/amplifiers are engineered
for high performance with wide frequency response, very low noise and distortion, and
excellent output regulation. Pre-Out/Power-In jacks allow connection of external signal
processing between the mixer and amplifier sections. Come with 8 input module ports,
2 mute circuits, tone controls, remote master level capability, insert point. Please
consult input modules listing for list of available modules.
ITEM
DESCRIPTION
PRICE
A903MK2UL ............... 30W mixer amp, 25V/70V/4Ω .........................................................CALL
A906MK2UL ............... 60W mixer amp, 25V/70V/8Ω .........................................................CALL
A912MK2UL ............... 120W mixer amp, 25V/70V/8Ω .......................................................CALL
M900MK2UL .............. Mixer, no amplifier ..........................................................................CALL
MB25B ...................... Rackmount kit .................................................................................CALL
YAMAHA XMV SERIES POWER AMPLIFERS These amps combine Class ‘D’
efficiency with flexible I/O connectivity for use in a wide range of environments. All
feature the new Double Power Mode, which doubles the output power of selected
channels, and they can operate in both high-impedance (4Ω/8Ω) and low-impedance
(70V/100V) modes simultaneously, reducing the need for additional equipment.
All provide networking compatibility for easy setup and integration; XMV4140 and
XMV4280 use YDIF protocol and XMV4280-D and XMV4140-D use Dante protocol.
ITEM
4Ω/8Ω
100V/70V
DOUBLE POWER MODE 4Ω/8Ω
PRICE
XMV4280 .............4x280W ............4x250W ..........................2x560W ................. COMING SOON!
XMV4140 .............4x140W ............4x125W ..........................2x280W ................. COMING SOON!
XMV4280-D .........4x280W ............4x250W ..........................2x560W ................. COMING SOON!
XMV4140-D .........4x140W ............4x125W ..........................2x280W ................. COMING SOON!
TOA INPUT MODULES These modules allow maximum design
flexibility. Most are available in a variety of terminal configurations
including XLR, RCA, screw and phone jack. Popular versions are
listed below, call for others.
ITEM
DESCRIPTION
PRICE
B01ST........................ Balanced line-in, screw...................................................................CALL
B41S ......................... Phone paging/mute module ............................................................CALL
L01F .......................... Line matching transformer..............................................................CALL
L01S .......................... 600Ω balanced line, screw .............................................................CALL
L11S .......................... 600Ω balanced line with muting, screw.........................................CALL
L41S .......................... 600Ω balanced line with signal activated muting, screw ..............CALL
M01F ......................... Mic input, FXLR ...............................................................................CALL
M01S ......................... Mic input, screw ..............................................................................CALL
M11S ......................... Mic input with muting, screw..........................................................CALL
M21S ......................... Microphone preamp module ............................................................CALL
M51F ......................... Mic preamp with gate .....................................................................CALL
M61F ......................... Mic preamp with compressor ..........................................................CALL
S04ST ........................ Switch selectable tone ....................................................................CALL
S20S.......................... 3-minute digital message/tone with USB .......................................CALL
T01ST ........................ 600Ω balanced line output, screw .................................................CALL
U01R ......................... Unbalanced line-in, RCA .................................................................CALL
U01ST........................ Unbalanced line-in, screw...............................................................CALL
U03R ......................... Stereo RCA input with HP/LP filters.................................................CALL
U11R ......................... Unbalanced line-in, muting, RCA ....................................................CALL
U11ST........................ Aux preamp module.........................................................................CALL
U14R ......................... Dual input priority with AGC............................................................CALL
U21S ......................... Aux input module ............................................................................CALL
V01S.......................... Remote VCA master volume ............................................................CALL
P912MK2
YAMAHA XH200 POWER AMP FOR 70V/100V SYSTEMS A 2-channel highimpedance power amplifier 200W/24Ω @70V, 200W/48Ω @100V. Current switching
allows for a compact and lightweight design in a 2RU. Highly precise dB display
detented attenuators, dedicated to each channel, are located on the front panel.
Equipped with XLR and Euroblock inputs and barrier strip terminal outputs, monitor/
remote terminals and a subsonic filter.
ITEM
DESCRIPTION
PRICE
XH200 ....................... 70V amplifier (200W) .................................................................. 685.67
CA1
CA1 REAR
P912MK2 REAR
CV1
TOA P-900 SERIES POWER AMPS These are modular single-channel power
amplifiers for paging, background/foreground music distribution and music/messaging-on-hold. All feature one 900 Series input module slot for custom system
configuration. All include 25V, 70V and 8Ω transformer-isolated speaker outputs with
screw terminal connector and protective cover plate, and a 5-year warranty. Please
consult input modules listing for list of available modules.
ITEM
DESCRIPTION
PRICE
P906MK2UL............... 60W power amplifier, 2RU ...............................................................CALL
P912MK2UL............... 120W power amplifier, 2RU .............................................................CALL
P924MK2UL............... 240W power amplifier, 3RU .............................................................CALL
MB25B ...................... Rackmount kit for P906/P912 .........................................................CALL
MB35B ...................... Rackmount kit for P924 ..................................................................CALL
Visit fullcompass.com today!
YORKVILLE COLISEUM
INSTALLATION AMPS
CA1T
The CA1/CA1T mixer amps
have 6 inputs, 3 on XLR/1/4" combo jacks with user selectable phantom power. There
are also 2 attenuated RCA unbalanced inputs and a telephone interface. Capable of
driving a 4Ω speaker load or 4 separate 70V speaker systems (1 “system” per zone),
these amps deliver 180W (mono) and include a pre-amp output. The CA1T model
adds a built-in AM-FM tuner. The CV1 speaker volume control allows remote volume
control of individual channels.
ITEM
DESCRIPTION
PRICE
CA1 ................70V installation mixing amplifier, 180W, 4Ω and 70V outputs.............. 299.00
CA1T...............70V installation mixing amplifier with AM-FM tuner .............................. 399.00
CV1 ................9-position, 70V in-wall speaker volume control for up to 35W/channel ... 40.00
For expert advice - call: 800-356-5844
M-F: 9:00-5:30 Central
145