Samsung PN58A550SF User manual

PN50A550S1F/PN58A550S1F
1-800-SAMSUNG (7267864)
Samsung Electronics America, Inc.
105 Challenger Road Ridgefield Park, NJ 07660-0511
Samsung Electronics Canada Inc., Customer Service
55 Standish Court Mississauga, Ontario L5R 4B2
Call center hours of operation (Mon-Sun 9AM-12AM EST).
To register this product please visit
www.samsung.com/global/register.
Rear & Side Panel Jacks
($-)).
1 POWER IN
7 ANT IN
# HEADPHONE
2 DIGITAL AUDIO OUT (OPTICAL)
8 COMPONENT IN 1, 2 / AV IN 1
3 AUDIO OUT (R/L)
9 EX-LINK
4 PC IN[PC]/[AUDIO]
0 HDMI IN 3
5 DVI IN (HDMI 2) (AUDIO-R/L)
! WISELINK
6 HDMI IN 1, 2
@ AV IN 2
Video Input Performance Comparison
/
/
Audio Output Performance Comparison
HDMI/DVI
Best
OPTICAL (Digital)
Best
PC/COMPONENT
Better
AUDIO (Analog)
Normal
S-VIDEO
Good
VIDEO
Normal
English - BN68-01363C-00Eng.indd 1
2008-02-13 오전 2:25:20
Remote Control Buttons
See “Remote Control” in the owner’s instructions for details.
1 POWER
Turns the TV on and off.
2 TV
Selects the TV mode directly.
3 NUMERIC BUTTONS
Press to change the channel.
4
Press to select additional channels
(digital and analog) being broadcast
by the same station. For example, to
select channel “54-3”, press “54”, then
press “
” and “3”.
5
MUTE
Press to temporarily cut off the sound.
^ ON/OFF
Press to backlight the buttons on the
remote.
This function is convenient for using at
night or when the room is dark.
(Using the remote control with the light
button set to On will reduce the battery
usage time.)
& PRE-CH
Tunes to the previous channel.
*
CH
Press to change channels.
( MENU
Displays the main on-screen menu.
6
VOL
Press to increase or decrease the
volume.
) W.LINK(WISELINK)
This function enables you to view and
play photo and music files from an
external device.
7 SOURCE
Press to display and select the
available video sources.
a RETURN
Returns to the previous menu.
8 CH LIST
Used to display Channel Lists on the
screen.
9 TOOLS
Use to quickly select frequently used
functions.
0 U
P▲ / DOWN▼ / LEFT◄ /
RIGHT► / ENTER
Use to select on-screen menu items
and change menu values.
! INFO
Press to display information on the TV
screen.
@ COLOR BUTTONS
Use these buttons in the Channel list
and WISELINK.
# CC
Controls the caption decoder.
$ E.MODE
Press to select the preset display and
sound modes for sports, cinema and
games.
b EXIT
Press to exit the menu.
c MTS
Press to choose stereo, mono or
Separate Audio Program (SAP
broadcast).
d DMA (Digital Media Adapter)
Use this when connecting a Samsung
DMA device through an HDMI interface
and switching to DMA mode.
For more information on the operating
procedures, refer to the user manual of
the DMA.
➢ This button is available when
“Anynet(HDMI-CEC)” is “On”. (see
page 87 of the owner's manual)
e P.SIZE
Picture size selection.
f FAV.CH
Press to switch to your favorite
channels.
% Use these buttons in the DMA,
WISELINK and Anynet+ modes.
(
: This remote can be used
to control recording on Samsung
recorders with the Anynet+ feature)
➢ The performance of the remote control may be affected by bright light.
➢ Using the remote control to set the light button to "On" will reduce the battery usage time.
English - BN68-01363C-00Eng.indd 2
2008-02-13 오전 2:25:23
Connecting a DVD Player or Cable Box / Satellite receiver (Set-Top Box)
Connecting to HDMI (High Definition Multimedia Interface)
DVD Player or Cable Box /
Satellite receiver (Set-Top Box)
TV Rear Panel
TV Side Panel
1
2
HDMI Cable (Not supplied)
Connect an HDMI Cable between
the HDMI IN (1, 2 or 3) jack on
the TV and the HDMI jack on the
DVD Player or Cable Box / Satellite
receiver (Set-Top Box).
Press the SOURCE button on the
remote control until you see the
Set-Top/Cable Box signal (see
“Viewing an External Signal Source”
on page ).
or
➢ Please make sure the HDMI source’s (Set-Top/Cable Box) power is on before selecting HDMI from the Source List on the TV.
What is HDMI?
• HDMI, or high-definition multimedia interface, is an interface that enables the transmission of digital audio and video signals using a single
cable.
• The difference between HDMI and DVI is that the HDMI device is smaller in size and has the HDCP (High Bandwidth Digital Copy
Protection) coding feature installed.
➢ Each DVD Player or Cable Box / Satellite receiver (Set-Top Box) has a different back panel configuration.
➢
The TV may not output sound and pictures may be displayed with abnormal color when DVD Player or Cable Box / Satellite receivers
supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI cable and there is no sound, connect
the HDMI cable to the HDMI IN 2 jack and the audio cables to the DVI IN (HDMI2) [R-AUDIO-L] jacks on the back of the TV. If this
happens, contact the company that provided the DVD Player or Cable Box / Satellite receiver to confirm the HDMI version, then request
an upgrade.
➢
HDMI cables that are not 1.3 may cause annoying flicker or no screen display.
Connecting to DVI (Digital Visual Interface)
DVD Player or Cable Box /
Satellite receiver (Set-Top Box)
TV Rear Panel
1
2
Audio Cable (Not supplied)
3
2
➢
HDMI/DVI Cable (Not supplied)
Connect a HDMI/DVI Cable or DVIHDMI Adapter between the HDMI
IN 2 jack on the TV and the DVI jack
on the DVD Player or Cable Box/
Satellite receiver (Set-Top Box).
Connect Audio Cables between the
DVI IN (HDMI 2) [R-AUDIO-L] jack
on the TV and the DVD Player or
Cable Box / Satellite receiver (SetTop Box).
Press the SOURCE button on the
remote control until you see the
Set-Top/Cable Box signal (see
“Viewing an External Signal Source”
on page ).
Each DVD Player or Cable Box /
Satellite receiver (Set-Top Box) has a
different back panel configuration.
➢
When connecting a DVD Player or
Cable Box / Satellite receiver (SetTop Box), match the color of the
connection terminal to the cable.
➢
When using an HDMI / DVI cable
connection, you must use the HDMI IN
2 jack.
Continued...
English - 3
BN68-01363C-00Eng.indd 3
2008-02-13 오전 2:25:28
Connecting to Y, PB, PR
DVD Player or Cable Box/
Satellite receiver (Set-Top Box)
1
TV Rear Panel
2
2
3
Audio Cable (Not supplied)
Component Cable (Not supplied)
Connect a Component Cable
between the COMPONENT IN (1 or
2) [Y, PB, PR] jacks on the TV and
the COMPONENT [Y, PB, PR] jacks
on the DVD Player or Cable Box /
Satellite receiver(Set-Top Box).
Connect Audio Cables between
the COMPONENT IN (1 or 2) [RAUDIO-L] jacks on the TV and the
AUDIO OUT jacks on the DVD
Player or Cable Box / Satellite
receiver (Set-Top Box).
Press the SOURCE button on the
remote control until you see the
Set-Top/Cable Box signal (see
“Viewing an External Signal Source”
on page ).
➢
Component video separates the video into Y (Luminance (brightness)), PB (Blue) and PR (Red) for enhanced video quality. Be
sure to match the component video and audio connections. For example, if connecting the video cable to COMPONENT IN,
connect the audio cable to COMPONENT IN also.
➢
➢
Each DVD Player or Cable Box / Satellite receiver (Set-Top Box) has a different back panel configuration.
When connecting a DVD Player or Cable Box / Satellite receiver (Set-Top Box), match the color of the connection terminal to the
cable.
Connecting a Camcorder
TV Side Panel
Camcorder
or
1
2
S-Video Cable(Not supplied)
Video Cable (Not supplied)
Audio Cable (Not supplied)
2
3
4
➢
Each Camcorder has a different back panel configuration.
➢
When connecting a Camcorder, match the color of the connection terminal to the cable.
Locate the A/V output jacks on the
camcorder.
Connect a Video Cable (or SVideo Cable) between the AV IN 2
[VIDEO] (or S-VIDEO) jack on the
TV and the VIDEO OUT jack on the
Camcorder.
Connect Audio Cables between the
AV IN 2 [L-AUDIO-R] jacks on the
TV and the AUDIO OUT jacks on
the Camcorder.
Press the SOURCE button on the
remote control until you see the
Camcorder signal (see “Viewing an
External Signal Source” on page
).
English - 4
BN68-01363C-00Eng.indd 4
2008-02-13 오전 2:25:31
Connecting a VCR
TV Rear Panel
TV Side Panel
1
VCR Rear Panel
2
2
Audio Cable
(Not supplied)
3
Video Cable (Not supplied)
Antenna Cable (Not supplied)
4
➢
➢
➢
➢
Unplug the cable or antenna from
the back of the TV.
Connect the cable or antenna to
the ANT IN terminal on the back of
the VCR.
Connect an Antenna Cable between
the ANT OUT terminal on the VCR
and the ANT IN terminal on the TV.
Connect a Video Cable between the
VIDEO OUT jack on the VCR and
the AV IN 1 [Y/VIDEO] or AV IN 2
[VIDEO] jack on the TV.
Connect Audio Cables between the
AUDIO OUT jacks on the VCR and
the AV IN 1 (or AV IN 2) [R-AUDIOL] jacks on the TV.
Press the SOURCE button on
the remote control until you see
the VCR signal (see “Viewing an
External Signal Source” on page
11).
If you have a “mono” (non-stereo) VCR, use a Y-connector (not supplied) to hook up to the right and left audio input jacks of the
TV. If your VCR is stereo, you must connect two cables.
Each VCR has a different back panel configuration.
When connecting a VCR, match the color of the connection terminal to the cable.
When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable (Yellow).
Connecting a S-Video
TV Side Panel
TV Rear Panel
1
VCR Rear Panel
2
3
2
4
S-Video Cable (Not supplied)
To begin, follow steps 1 in the
previous section to connect the
antenna or cable to your VCR and
your TV.
Connect an S-Video Cable between
the S-VIDEO OUT jack on the VCR
and the AV IN 2 [S-VIDEO] jack on
the TV.
Connect Audio Cables between the
AUDIO OUT jacks on the VCR and
the AV IN 2 [R-AUDIO-L] jacks on
the TV.
Press the SOURCE button on the
remote control until you see the VCR
signal (see “Viewing an External
Signal Source” on page ).
➢
An S-Video may be included with
your VCR. (If not, check your local
electronics store.)
➢
Each VCR has a different back panel
configuration.
➢
When connecting a VCR, match the
color of the connection terminal to the
cable.
Audio Cable (Not supplied)
English - 5
BN68-01363C-00Eng.indd 5
2008-02-13 오전 2:25:38
Connecting a Digital Audio System
TV Rear Panel
1
Digital Audio System
Connect an Optical Cable
between the DIGITAL AUDIO OUT
(OPTICAL) jacks on the TV and
the Digital Audio Input (OPTICAL)
jacks on the Digital Audio System.
When a Digital Audio System is
connected to the “DIGITAL AUDIO
OUT (OPTICAL)” jack:
Decrease the volume of the TV,
and adjust the volume level with the
system’s volume control.
➢ OPTICAL: converts the electric
signal into an optical light signal, and
transmits it through glass fibers.
Optical Cable (Not supplied)
➢
➢
➢
5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH.
Each Digital Audio System has a different back panel configuration.
When the receiver (home theater) is set to On, you can hear sound output from the TV’s Optical jack. When the TV is displaying
a DTV(air) signal, the TV will send out 5.1 channel sound to the Home theater receiver. When the source is a digital component
such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theater receiver. If you
want to hear 5.1 channel audio, connect the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD player or Cable/Satellite Box
directly to an Amplifier or Home Theater, not the TV.
Connecting an Amplifier / DVD Home Theater
TV Rear Panel
1
Amplifier / DVD Home Theater
Audio Cable (Not supplied)
Connect Audio Cables between the
AUDIO OUT [R-AUDIO-L] jacks on
the TV and AUDIO IN [L-AUDIO-R]
jacks on the Amplifier/DVD Home
Theater. When an audio amplifier
is connected to the AUDIO OUT
[R-AUDIO-L] jacks terminals :
Decrease the volume of the TV,
and adjust the volume level with the
Amplifier’s volume control.
➢
Each Amplifier / DVD Home
Theater has a different back panel
configuration.
➢
When connecting an Amplifier / DVD
Home Theater, match the color of the
connection terminal to the cable.
English - 6
BN68-01363C-00Eng.indd 6
2008-02-13 오전 2:25:43
Connecting a PC
Using the D-Sub Cable
Using the D-Sub Cable
1
2
TV Rear Panel
PC
Connect a D-Sub cable between the
PC IN [PC] jack on the TV and the
PC output jack on your computer.
Connect a PC Audio cable between
the PC IN [AUDIO] jack on the TV
and the Audio Out jack of the sound
card on your computer.
➢ When connecting a PC match the
color of the connection terminal to the
cable.
PC Audio Cable (Not supplied)
2
D-Sub Cable (Not supplied)
Using the HDMI/DVI Cable
TV Rear Panel
Using the HDMI/DVI Cable
1
PC
2
Connect a HDMI/DVI cable between
the [HDMI IN 2] jack on the TV
and the PC output jack on your
computer.
Connect a 3.5 mm Stereo plug to
2 RCA cable between the DVI IN
(HDMI IN 2) [R-AUDIO-L] jacks on
the TV and the Audio Out jack of the
sound card on your computer.
➢ When connecting a PC match the
2
3.5 mm Stereo plug to 2 RCA Cable (Not supplied)
color of the connection terminal to the
cable.
HDMI/DVI Cable (Not supplied)
➢
Each PC has a different back panel configuration.
➢
When using an HDMI/DVI cable connection, you must use the HDMI IN 2 terminal.
English - 7
BN68-01363C-00Eng.indd 7
2008-02-13 오전 2:25:49
Turning the TV On and Off
Press the POWER button on the remote control.
The TV will be turned on and you will be able to use its
features. You can also use the Power button on the front of
the TV
➢ If your TV isn’t turned on when the Power button is
pressed: Press the TV button to check if the TV mode
has been chosen.
Viewing the Menus and Displays
Your TV has a simple, easy-to-use menu system that appears
on the screen. This system makes it convenient and fast to
use the TV’s features.
The TV also displays the status of many features.
Memorizing the Channels
Selecting the Video Signal-source
Before your television can begin memorizing the available
channels, you must specify the type of signal source that is
connected to the TV(i.e., an air or a cable system).
1
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Channel, then
press the ENTER button.
2
Press the ENTER button to select Antenna.
Press the ▲ or ▼ button to select Air or Cable,
then press the ENTER button. Press the EXIT
button to exit.
Viewing the Menus
With the power on, press the MENU button.
The main menu appears on the screen. The menu’s
left side has icons: Picture, Sound, Channel,
Setup, Input, Application.
2
Press the ▲ or ▼ button to select one of the icons.
Then press the ENTER button to access the icon’s
sub-menu.from the menu.
Press the EXIT button to exit.
Channel
1
Antenna
: Air
Air
Cable
Auto Program
Channel List
Clear Scrambled Channel
Fine Tune
Signal Strength
➢ It takes about one minute until the on-screen menu
disappears.
Picture
Mode
: Standard
Cell Light
:7
Contrast
: 90
Brightness
: 45
Sharpness
: 50
Color
: 50
Tint (G/R)
: G50/R50
Storing Channels in Memory (Automatic Method)
1
2
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Channel, then
press the ENTER button.
Press the ▲ or ▼ button to select Auto Program,
then press the ENTER button.
Detailed Settings
Channel
Antenna
: Air Auto Program
►
Channel List
Clear Scrambled Channel
Fine Tune
Signal Strength
Displaying Status Information
Press the INFO button on the remote control.
The TV will display the channel, the type of sound, and the
status of certain picture and sound settings.
➢ The information window automatically disappears
after a few seconds. Press the INFO button once to
manually close the window.
Press the button to select an antenna connection,
then press the ENTER button.
➢ Air: Air antenna signal.
Cable: Cable antenna signal.
Auto: Air and Cable antenna signals.
Auto Program
TV #1
DTV Air
3
Sun, Sep 3 1:45 pm
Dolby Digital
13-1
M. Spillane’s Mike Hammer
480i 4:3 English
Select the antennas to memorize.
12:59 pm - 1:59 pm
Bonocrunch
Start
Air
Cable
Start
Auto
Start
Move
Enter
Return
Continued...
English - BN68-01363C-00Eng.indd 8
2008-02-13 오전 2:25:50
Picture Control
4
When selecting the Cable TV system:
Press the ENTER button to start the auto program.
Press the ▲, ▼, ◄, ► to select the correct analog
signal cable system source among STD, HRC, and
IRC, then press the ENTER button. If you have
Digital cable TV, select the cable system signal
source for both Analog and Digital.
➢ STD, HRC, and IRC identify various types of
cable TV systems. Contact your local cable
company to identify the type of cable system
that exists in your particular area. At this point
the signal source has been selected.
You can select the type of picture which best corresponds to your
viewing requirements.
Changing the Picture Standard
1
Picture
Auto Program
Select the cable system.
Analog
STD
HRC
IRC
Digital
STD
HRC
IRC
Move
Press the MENU button to display the menu.
Press the ENTER button to select Picture.
Press the ENTER button to select Mode.
Press the ▲ or ▼ button to select Dynamic,
Standard, or Movie, then press the ENTER button.
Enter
Return
Mode
: Dynamic
Cell Light
Contrast
: 7Standard
Movie
: 80
Brightness
: 45
Sharpness
: 50
Color
: 50
Tint (G/R)
: G50/R50
Detailed Settings
5
The TV begins memorizing all available stations.
If you want to stop Auto Programming, press the
ENTER button.
The Stop Auto Program? message will be
displayed. Select Yes by pressing the ◄ or ►
button, then press the ENTER button.
Picture Mode
• Dynamic: Select the picture for high-definition in a
bright room.
• Standard: Select the picture for the optimum display
in the normal environment.
• Movie: Select the picture for viewing movies in a
dark room.
Auto Program
Stop Auto Program?
Air 10
3%
Customizing the Picture Settings
No
Yes
Move
Enter
Return
● The TV must be connected to an antenna/cable
in order to receive digital TV signals. Even if a
particular channel is deleted from the memory,
you can always tune to that channel directly by
using the number buttons on the remote control.
1
2
To select the desired picture mode, follow the
“Changing the Picture Standard” instructions number
1.
Press the ▲ or ▼ button to select Cell Light,
Contrast, Brightness, Sharpness, Color, or Tint
(G/R), then press the ENTER button.
Viewing All Channels
Mode
:Standard
Picture
1
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Channel, then
press the ENTER button.
Brightness
: 45
2
Press the ▲ or ▼ button to select Channel List,
then press the ENTER button.
Press the ◄ button to select Added Channels.
Sharpness
: 50
Color
: 50
Tint (G/R)
: G50/R50
Press the ▲ or ▼ button to select All Channels,
then press the ENTER button. Shows all currently
available channels. Press the ▲ or ▼ button to
select a channel to view, then press the ENTER
button.
Detailed Settings
3
All Channels
Air
6-1 7
♥ SBS
Air
7-1 ♥ KBS D-2
9
9-1
10
10-1
11-1
19
22
Air
♥ KBS D-1
Air
♥ EBS DTV
♥ MBC DTV
Air
Air
■ Antenna ■ Zoom ■ Select
TOOLS
Cell Light
: 7
Contrast
: 95
►
Picture Options
Option ► Next Program
Continued...
English - BN68-01363C-00Eng.indd 9
2008-02-13 오전 2:25:51
To Select the Source
3
Press the ◄ or ► button to decrease or increase the
value of a particular item. Press the ENTER button.
Press the EXIT button to exit.
7
Move
Adjust
Enter
Press the MENU button.
Press the ▲ or ▼ button to select Input, then press
the ENTER button.
Input
Cell Light
1
Return
Source List
Edit Name
➢ • When you make changes to Cell Light,
Contrast, Brightness, Sharpness, Color, or
Tint (G/R) the OSD will be adjusted accordingly.
• When in PC mode, Tint(G/R), Sharpness and
Color are not available.
•Each adjusted setting will be stored separately
according to its input mode.
• Cell Light: Selects the brightness of PDP Cell Light.
• Contrast: Adjusts the contrast level of the picture.
• Brightness: Adjusts the brightness level of the
picture.
• Sharpness: Adjusts the edge definition of the
picture.
• Color: Adjusts color saturation of the picture.
• Tint(G/R): Adjusts the color tint of the picture by
compensating the red and green color
2
Press the ENTER button again to select Source
List. Press the ▲ or ▼ button to select a signal
source, then press the ENTER button.
TV
AV1
----
AV2
----
S-Video
----
Component1
----
Component2
----
PC
Refresh
---TOOLS
Option
➢ Available signal sources: TV, AV1, AV2,
S-Video, Component1, Component2, PC,
HDMI1, HDMI2/DVI, HDMI3, USB.
➢ You can choose only those external devices
that are connected to the TV.
In the Source List, connected inputs will be
highlighted and sorted to the top. Inputs that
are not connected will be sorted to the bottom.
➢ Using the Color buttons on the remote with the
Source list.
• Red (Refresh): Refreshes the connecting
external devices.
• TOOLS (Option): Displays the Edit Name and
Information menus.
English - 10
BN68-01363C-00Eng.indd 10
2008-02-13 오전 2:25:51
Troubleshooting
If the TV seems to have a problem, first try this list of possible problems and solutions.
If none of these troubleshooting tips apply, call your nearest Samsung service center.
Problem
Poor picture quality.
Possible Solution
No sound or sound is too low at
maximum volume.
- Try another channel.
- Adjust the antenna.
- Check all wire connections.
- Try another channel.
- Adjust the antenna.
- Try another channel.
- Press the SOURCE button.
- Make sure the TV is plugged in.
- Check the antenna connections.
- Make sure the MUTE button is off.
First, check the volume of units connected to your TV (digital broadcasting receiver,
DVD, cable broadcasting receiver, VCR, etc.). Then, adjust the TV volume accordingly.
Picture rolls vertically.
Check all connections.
The TV operates erratically.
Unplug the TV for 30 seconds, then try operating it again.
The TV won’t turn on.
Make sure the wall outlet is working.
Remote control malfunctions
- Replace the remote control batteries.
- Clean the upper edge of the remote control(transmission window).
- Check the battery terminals.
- Make sure the remote has batteries.
- Check that the “+” and “-” ends of the batteries are inserted correctly.
Please check the digital signal strength and input antenna.
Poor sound quality.
No picture or sound.
Digital broadcasting screen problem.
The image is too light or too dark.
The image is too large or too small.
The visual qualities of digital
channels vary.
Screen is black and power indicator
light blinks steadily.
Although the TV caption shows HD,
the visual quality is not satisfactory.
- Adjust the Brightness and Contrast.
- Adjust the Fine tuning.
Adjust the Size settings.
The visual qualities of digital channels may vary depending on the original production
method(analog or digital).
- If the original production method is digital: High visual quality.
- If the original production method is analog: The digital program displayed on the
screen is originally an analog program which has been converted to digital.
The visual quality is of an SD(Standard Definition) grade.
On your computer check; Power and Signal Cable.
The TV is using its power management system.
Move the computer’s mouse or press any key on the keyboard.
On your equipment check (STB, DVD, etc) ; Power and Signal Cable.
The TV is using its power management system.
Press the Source button on the panel or remote control.
Turn the TV off and on.
The HD(High Definition) caption that appears when switching channels or when
pressing the Information button on the remote control means the selected channel is
a digital channel. If the broadcasting station converts an analog signal into digital and
transmits the signal, the visual quality may not be perfect.
A distorted picture appears in the
corner of the screen.
If Just Scan is selected in some external devices, a distorted picture may appear in
the corner of the screen. This symptom is caused by external devices, not the TV.
A strange sound is heard.
This is caused by minor systems operation and is not a defect.
Pixels are visible on the screen.
There may be few bright or dark pixels on the screen. These pixels will have no impact
on the performance of the product.
The "Resets all settings to the
default values" message appears.
This appears when you press and hold the EXIT button for a while. The product
settings are reset to the factory defaults.
English - 11
BN68-01363C-00Eng.indd 11
2008-02-13 오전 2:25:52
Contact SAMSUNG WORLD-WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
Country
Customer Care Center 
Web Site
Address
Samsung Electronics Canada Inc., Customer Service 55
Standish Court Mississauga, Ontario L5R 4B2 Canada
CANADA
1-800-SAMSUNG (7267864)
www.samsung.com/ca
U.S.A
1-800-SAMSUNG (7267864)
www.samsung.com
Samsung Electronique Canada Inc., Service à la Clientèle
55 Standish Court Mississauga, Ontario L5R 4B2
Canada
Samsung Electronics America, Inc. 105 Challenger Road
Ridgefield Park, NJ 07660-0511
BN68-01363C-00
BN68-01363C-00Eng.indd 12
2008-02-13 오전 2:25:52