o & Mo
di
re
Au
Endstufen
21
DAP
Au
di
o & Mo
Amplifiers
re
DAP Elements Series Palladium
These completely redesigned Palladium amplifiers will bring “good looks” into your gear
rack! Inspired by the retro-look found in tube-amps and 19” rackgear, this Palladium Vintage
offers sufficient power packed in a very stylish housing for a really competitve price! The
whole series contains not less than 7 models, each within its own power and price range.
Die Palladium-Verstärker präsentieren sich in einem komplett neuen Design und sorgen für einen
stilvollen “Retro”-Look. Palladium-Vintage bietet leistungsstarke Power, die in einem modernen Gehäuse
verpackt ist. Das Preis-Leistungsverhältnis ist exzellent! Die ganze Serie enthält nicht weniger als 7 Modelle,
jedes in einer eigenen Leistungs- und Preiskategorie.
Mainfeatures:
• Tough “roadproof” housing
• 19” rackmountable
• True stereo power for DJ
Features:
• roadtaugliches Gehäuse
• 19”-Einbaumaß
• Stereo-Power für DJs
ORDERCODE
D4131
ORDERCODE
D4133
ORDERCODE
D4134
ORDERCODE
D4135
ORDERCODE
D4136
ORDERCODE
D4137
2x 300 Watt RMS - 8 Ω
2x 450 Watt RMS - 4 Ω
900 Watt RMS - 8 Ω
2x 400 Watt RMS - 8 Ω
2x 600 Watt RMS - 4 Ω
1200 Watt RMS - 8 Ω
2x 525 Watt RMS - 8 Ω
2x 800 Watt RMS - 4 Ω
1600 Watt RMS - 8 Ω
2x 750 Watt RMS - 8 Ω
2x 1025 Watt RMS - 4 Ω
2050 Watt RMS - 8 Ω
Freq. resp.:
20 Hz -20KHz: + 0.1 /
- 3 dB (1W / 8 Ω)
THD into 4Ω, 1 KHz: <0.05% @200W
SMPER IMD:
<0.01% @100W, into
(60Hz & 7 Khz)
Slew Rate:
40V/ µs
Damping Factor:
300:1,1 KHz@8Ω
Input CMRR (@1Khz): >60dB
Voltage Gain:
50x standard
Input Sens. (@8Ω): 0.775V for rated power
Input Impedance:
20KΩ, balanced
10KΩ, unbalanced
Hum and Noise:
-103dB
Crosstalk:
<60dB
20 Hz -20KHz: + 0.1 /
- 3 dB (1W / 8 Ω)
<0.05% @250W
<0.01% @160W, into
(60Hz & 7 Khz)
40V/ µs
300:1,1 KHz@8Ω
>60dB
50x standard
0.775V for rated power
20KΩ, balanced
10KΩ, unbalanced
-103dB
<60dB
20 Hz -20KHz: + 0.1 /
- 3 dB (1W / 8 Ω)
<0.05% @350W
<0.01% @250W, into
(60Hz & 7 Khz)
40V/ µs
300:1,1 KHz@8Ω
>60dB
50x standard
0.775V for rated power
20KΩ, balanced
10KΩ, unbalanced
-103dB
<60dB
20 Hz -20KHz: + 0.1 /
- 3 dB (1W / 8 Ω)
<0.05% @450W
<0.01% @300W,
into (60Hz & 7 Khz)
40V/ µs
300:1,1 KHz@8Ω
>60dB
61x standard
0.775V for rated power
20KΩ, balanced
10KΩ, unbalanced
-103dB
<60dB
20 Hz -20KHz: + 0.1 /
- 3 dB (1W / 8 Ω)
<0.05% @600W
<0.01% @400W,
into (60Hz & 7 Khz)
40V/ µs
350:1,1 KHz@8Ω
>60dB
70x standard
0.775V for rated power
20KΩ, balanced
10KΩ, unbalanced
-103dB
<60dB
20 Hz -20KHz: + 0.1 /
- 3 dB (1W / 8 Ω)
<0.05% @800W
<0.01% @525W,
into (60Hz & 7 Khz)
50V/ µs
400:1,1 KHz@8Ω
>60dB
80x standard
0.775V for rated power
20KΩ, balanced
10KΩ, unbalanced
-103dB
<60dB
20 Hz -20KHz: + 0.1 /
- 3 dB (1W / 8 Ω)
<0.05% @1025W
<0.01% @750W,
into (60Hz & 7 Khz)
60V/ µs
500:1,1 KHz@8Ω
>60dB
91x standard
0.775V for rated power
20KΩ, balanced
10KΩ, unbalanced
-103dB
<60dB
Connectors (per ch.):
Female XLR (pin 2+),
TRS (tip +), 5-way Output
binding post
Power Supply:
230 V / 50-60 Hz
Max. Curr. Draw 220V: 5 A
Cooling:
2 variable speed DC fans
Controls:
2 front attenuators, rear panel
signal ground lift jumper
Female XLR (pin 2+),
TRS (tip +), 5-way Output
binding post
230 V / 50-60 Hz
6A
2 variable speed DC fans
2 front attenuators, rear panel
signal ground lift jumper
Female XLR (pin 2+),
TRS (tip +), 5-way Output
binding post
230 V / 50-60 Hz
7A
2 variable speed DC fans
2 front attenuators, rear panel
signal ground lift jumper
Female XLR (pin 2+),
TRS (tip +), 5-way Output
binding post
230 V / 50-60 Hz
8A
2 variable speed DC fans
2 front attenuators, rear panel
signal ground lift jumper
Female XLR (pin 2+),
TRS (tip +), 5-way Output
binding post
230 V / 50-60 Hz
8A
2 variable speed DC fans
2 front attenuators, rear panel
signal ground lift jumper
Female XLR (pin 2+),
TRS (tip +), 5-way Output
binding post
230 V / 50-60 Hz
12 A
2 variable speed DC fans
2 front attenuators, rear panel
signal ground lift jumper
Female XLR (pin 2+),
TRS (tip +), 5-way Output
binding post
230 V / 50-60 Hz
15 A
2 variable speed DC fans
2 front attenuators, rear panel
signal ground lift jumper
Indicators (per ch.):
PROTECT LED, CLIP LED,
SIGNAL LED, POWER LED
Temperature, DC, sub / ultea,
sonic short cicuit, IGM, output
483x400x 89 mm
22 Kg
20 Kg
PROTECT LED, CLIP LED,
SIGNAL LED, POWER LED
Temperature, DC, sub / ultea,
sonic short cicuit, IGM, output
483x400x 89 mm
24 Kg
22 Kg
PROTECT LED, CLIP LED,
SIGNAL LED, POWER LED
Temperature, DC, sub / ultea,
sonic short cicuit, IGM, output
483x400x 89 mm
26 Kg
24 Kg
PROTECT LED, CLIP LED,
SIGNAL LED, POWER LED
Temperature, DC, sub / ultea,
sonic short cicuit, IGM, output
483x400x 89 mm
28 Kg
26 Kg
PROTECT LED, CLIP LED,
SIGNAL LED, POWER LED
Temperature, DC, sub / ultea,
sonic short cicuit, IGM, output
483x400x 89 mm
30 Kg
28 Kg
PROTECT LED, CLIP LED,
SIGNAL LED, POWER LED
Temperature, DC, sub / ultea,
sonic short cicuit, IGM, output
483x400x 89 mm
32 Kg
30 Kg
2x 100 Watt RMS - 8 Ω
2x 200 Watt RMS - 4 Ω
400 Watt RMS - 8 Ω
PROTECT LED, CLIP LED,
SIGNAL LED, POWER LED
Protection:
Temperature, DC, sub / ultea,
sonic short cicuit, IGM, output
Dimensions (LxWxH): 483x400x 89 mm
Gross Weight:
20 Kg
Net Weight:
18 Kg
76
D4132
2x 250 Watt RMS - 8 Ω
2x 350 Watt RMS - 4 Ω
700 Watt RMS - 8 Ω
Bridged mode:
DAP
ORDERCODE
2x 160 Watt RMS - 8 Ω
2x 250 Watt RMS - 4 Ω
500 Watt RMS - 8 Ω
Stereo mode:
Gear
Amplifiers
Amplifiers
di
o & Mo
re
Au
DAP P-400 Vintage
ORDERCODE
D4131
DAP P-700 Vintage
ORDERCODE
D4133
DAP P-1200 Vintage
ORDERCODE
D4135
Stereo Power Amplifier
DAP P-500 Vintage
ORDERCODE
D4132
Stereo Power Amplifier
Stereo Power Amplifier
DAP P-900 Vintage
ORDERCODE
DAP P-1600 Vintage
ORDERCODE
D4134
Stereo Power Amplifier
Stereo Power Amplifier
Stereo Power Amplifier
D4136
DAP P-2000 Vintage
ORDERCODE
D4137
Stereo Power Amplifier
Amplifiers
Gear
77
DAP
Au
di
re
DAP Cesium 200
Compact Power Amplifier
o & Mo
Amplifiers
ORDERCODE:
D4160
A further member of the DAP Audio-family is the Cesium range. Two versions are available,
Cesium 200 and Cesium 300. They are both in a roadproof, impact resistant 19” rackmountable housing with a stylish Alu-Look. The Cesium range might surprise you because it offers
excellent quality for a nice price! The Cesium 200 is a powerful unit with protection against
overheat, short circuits, intellectual clip limiter, limit and softstart. This DAP Audio amplifier
is easy to handle and perfect for heavy duty operations such as DJ’s, fixed installations and
live-gigs.
Ein weiteres Mitglied der DAP Audio-Familie ist die Cesium-Serie. Es gibt zwei Versionen: Cesium 200
und Cesium 300. Beide sind “roadgetestet” und haben ein modernes Alu-Gehäuse im 19”-Einbaumaß.
Die Cesium-Serie wird Sie überraschen weil sie exzellente Qualität zu einem fairen Preis bietet. Der Cesium
200 ist ein Power-Verstärker mit einem Schutz gegen Überhitzung und Kurzschlüsse. Er verfügt über einen
Intellectual-Clip-Limiter, Limit und Softstart. Dieser neue DAP-Audio-Verstärker ist einfach zu bedienen und
perfekt geeignet für DJs, feste Installationen und Live-Gigs.
Technical Information
8 Ω Stereo Power:
4 Ω Stereo Power:
70W
105W
Freq. Resp. (+0/ 0.3,1W/8 Ω): 20Hz-20KHz,
-3dB@100KHz
THD+N:
<0.05%
Slew Rate:
40V/µs
DAMPING Factor:
>200
S/N Ratio:
>95dB
Input sensitivity:
0.775V, 1V, 1.4V
Input imped.(bal/unbal.): 20KΩ / 10KΩ
Protection:
overheat, short circuits, DC,
limit and softstart, Output Relay-Zero Current Switch,
Intellectual Clip Limiter.
Voltage:
AC 240V-50Hz (CE)
Crosstalk:
>80dB
Gross Weight:
Dimensions:
13.9 Kg
483x490x44.5mm (LxWxH)
1
HE
DAP Cesium 300
Compact Power Amplifier
ORDERCODE:
D4161
The Cesium 300 is the “big brother” of Cesium 200. This amplifier has a roadproof, impact
resistant 19” rackmountable housing with a stylish a Alu-Look and offers an excellent price
quality balance! The Cesium 300 has 150W-power and is easy to handle. Perfect for heavy
duty operations such as DJ’s, fixed installations and live-gigs. Brilliant sound!
Der neue Cesium 300 ist der “große Bruder” des Cesium 200. Dieser Verstärker hat ein roadgetestetes
modernes Alu-Gehäuse im 19”-Einbaumaß und bietet ein hervorragendes Preis-Leistungsverhältnis. Der
Cesium 300 verfügt über 150W Power und ist leicht zu bedienen. Ideal geeignet für DJs, feste Installationen
und Live-Gigs. Brillanter Sound!
1
HE
78
DAP
Gear
19
INCH
Technical Information
8 Ω Stereo Power:
4 Ω Stereo Power:
100W
150W
Freq. Resp. (+0/ 0.3,1W/8 Ω): 20Hz-20KHz,
-3dB@100KHz
THD+N:
<0.05%
Slew Rate:
40V/µs
DAMPING Factor:
>200
S/N Ratio:
>95dB
Input sensitivity:
0.775V, 1V, 1.4V
Input imped.(bal/unbal.): 20KΩ / 10KΩ
19
INCH
Amplifiers
Protection:
overheat, short circuits, DC,
limit and softstart, Output Relay-Zero Current Switch,
Intellectual Clip Limiter.
Voltage:
AC 240V-50Hz (CE)
Crosstalk:
>80dB
Gross Weight:
Dimensions:
14.3 Kg
483x490x44.5mm (LxWxH)
Amplifiers
di
o & Mo
re
Au
DAP Vision
For the most demanding user and for high power outputs, DAP Audio has the Vision
amplifier range. This serie of 3 models delivers high power and stabililty in any circumstance
and for every venue. Their rough design, uses state of the art components and makes them
true powerhorses.
DAP VISION-1600
ORDERCODE
Für anspruchsvollste Anwender und für High-Power-Outputs hat DAP eine neue Verstärker-Serie
entwickelt: Vision. Diese brandneue Produktreihe, die drei Modelle umfaßt, liefert High-Power und Stabilität
unter jeden Umständen und bei allen Gelegenheiten. Das Design macht die neuen Vision-Verstärker zu
einem echten Blickfang. Absolute Power-Kisten!
D4151
2
High Power Stereo Amplifier
HE
Technical Information
8W Stereo power:
4W Stereo power:
520Wx2
780Wx2
Freq. Response:
THD+N:
Hum and noise:
Slew rate:
Damping Factor:
Input Sensitivity:
Input imp.(bal/unb.):
Protect:
20Hz-20KHz, -3dB@100KHz
<0.03%
103dB
30V/ µs
400:1
0.775V, 1V, 1.4V
20 KΩ /10 KΩ
Limit, DC, short circuit, overheat,
over load, softstart
2 fans, from rear to front
585mm x 580mm x 160mm
(LxWxH)
27 Kg
Cooling:
Packing dim.:
Gross Weight:
DAP VISION-2400
ORDERCODE
3
D4152
High Power Stereo Amplifier
HE
19
INCH
19
INCH
Technical Information
8W Stereo power:
4W Stereo power:
800Wx2
1200Wx2
Freq. Response:
THD+N:
Hum and noise:
Slew rate:
Damping Factor:
Input Sensitivity:
Input imp.(bal/unb.):
Protect:
over load, softstart
Cooling:
Packing dim.:
20Hz-20KHz, -3dB@100KHz
<0.03%
105dB
40V/ µs
300:1
0.775V, 1V, 1.4V
20 KΩ /10 KΩ
Limit, DC, short circuit, overheat,
Gross Weight:
2 fans, from rear to front
660mm x 590mm x 230mm
(LxWxH)
44 Kg
DAP VISION-3500
ORDERCODE
D4153
High Power Stereo Amplifier
3
HE
19
INCH
Technical Information
8W Stereo power:
4W Stereo power:
1000Wx2
1500Wx2
Freq. Response:
THD+N:
Hum and noise:
Slew rate:
Damping Factor:
Input Sensitivity:
Input imp.(bal/unb.):
Protect:
over load, softstart
Cooling:
Packing dim.:
20Hz-20KHz, -3dB@100KHz
<0.03%
105dB
44V/ µs
300:1
0.775V, 1V, 1.4V
20 KΩ /10 KΩ
Limit, DC, short circuit, overheat,
Gross Weight:
2 fans, from rear to front
660mm x 590mm x 230mm
(LxWxH)
47 Kg
Amplifiers
Gear
79
DAP
Au
di
o & Mo
Amplifiers
re
DAP Xtreme
The DAP Xtreme Power amplifiers have been developed with several different protection systems to serve as true workhorses for a wide range of applications and have been
manufactured with a 3 U. rugged steel chassis with a thick anodized aluminium from a PC.
Each amplifier can set the Gain, Limiter, Equalizer, Delay and the crossover depending on the
circumstances. The result is a pure clean sound, minimal distortion and with a clear different
advantage when comparing prices.
DAP Xtreme-700
DSP Controlled Stereo Power Amplifier
Die DAP-Xtreme-Power-Verstärker wurden mit einem 3-HE-Stahlchassis hergestellt. Jeder Verstärker
kann Gain, Limiter, Equalizer, Delay und Crossover je nach unterschiedlichen Anforderungen einstellen. Das
Ergebnis ist ein Verstärker mit einem verzerrungsfreien, klaren Sound und auffälligem Preisvorteil.
Interface-print, cable, and software included!
Interface-Print, Kabel und Software enthalten!
ORDERCODE:
D4170
Technical Information
8 Ω, 1 KHz, 0. 1%THD:
4 Ω, 1 KHz, 0. 1%THD:
2 Ω, 1 KHz, 0. 1%THD:
Bridge 8 Ω:
Bridge 4 Ω:
Input sensitivity:
Freq. resp.:
430 Watt
750 Watt
900 Watt
1500 Watt
1800 Watt
1.1 V
20 Hz-2-KHz,
+0, -1dB.
AT 1 Watt
THD (Below rated power, 1KHz): <0.05%
Slew rate:
>40V/µs
Damping factor (8 Ω):
>300
SN Rated (A weighed):
100 dB
IND SMPET@100W:
<0,05%
Dimensions:
19 inch x 47 x 13,6cm
Mounting depth:
47 cm
Weight:
24,16 kg
Extreme
Software
Parametric
Equalizer
Gain
Limiter
Set 5 definable
frequencies for left
and right channel
19,7 Hz-20Khz.
Set gain for left
and right channel
-60dB/+6dB.
Set Limit for left
and right channel;
-60 dB/0 dB.
Set hold time ms
Set Rms time Cst
dB/sec.
\Set decay dB/sec.
PEQ
Gain
Crossover
Delay
Set crossover
slope for left and
right channel.
6 dB/oct.
12 dB/oct.
14 dB/oct.
18 dB/oct.
Set delay for left
and right channel.
Limit
Delay
Xover
80
DAP
Gear
Amplifiers
Amplifiers
di
o & Mo
re
Au
DAP Xtreme-900
DSP Controlled Stereo Power Amplifier
DAP Xtreme-1300
DSP Controlled Stereo Power Amplifier
Interface-print, cable, and software included!
Inklusive Interface-Print, Kabel und Software!
Interface-print, cable, and software included!
Inklusive Interface-Print, Kabel und Software!
ORDERCODE:
D4171
ORDERCODE:
D4172
Technical Information
8 Ω, 1 KHz, 0. 1%THD:
4 Ω, 1 KHz, 0. 1%THD:
2 Ω, 1 KHz, 0. 1%THD:
Bridge 8 Ω:
Bridge 4 Ω:
Input sensitivity:
Freq. resp.:
520 Watt
870 Watt
1200 Watt
1800 Watt
2250 Watt
1.1 V
20 Hz-2-KHz, +0, -1dB.
AT 1 Watt
THD (Below rated power, 1KHz): <0.05%
Slew rate:
>40V/µs
Damping factor (8 Ω): >300
SN Rated (A weighed): 100 dB
IND SMPET@100W:
<0,05%
Dimensions:
19 inch x 47 x 13,6cm
Mounting depth:
47 cm
Weight:
24,98
Technical Information
8 Ω, 1 KHz, 0. 1%THD:
4 Ω, 1 KHz, 0. 1%THD:
2 Ω, 1 KHz, 0. 1%THD:
Bridge 8 Ω:
Bridge 4 Ω:
720 Watt
1050 Watt
1680 Watt
2200 Watt
2750 Watt
Input sensitivity:
Freq. resp.:
1.1 V
20 Hz-2-KHz, +0, -1dB.
AT 1 Watt
THD (Below rated power, 1KHz): <0.05%
Slew rate:
>40V/µs
Damping factor (8 Ω): >300
SN Rated (A weighed): 100 dB
IND SMPET@100W:
<0,05%
Dimensions:
19 inch x 47 x 13,6cm
Mounting depth:
47 cm
Weight:
25,46
DAP Xtreme-2000
DSP Controlled Stereo Power Amplifier
Interface-print, cable, and software included!
Inklusive Interface-Print, Kabel und Software!
ORDERCODE:
D4173
Technical Information
8 Ω, 1 KHz, 0. 1%THD:
4 Ω, 1 KHz, 0. 1%THD:
2 Ω, 1 KHz, 0. 1%THD:
Bridge 8 Ω:
Bridge 4 Ω:
1020 Watt
1520 Watt
2000 Watt
2800 Watt
3000 Watt
Input sensitivity:
Freq. resp.:
1.1 V
20 Hz-2-KHz, +0, -1dB.
AT 1 Watt
THD (Below rated power, 1KHz): <0.05%
Slew rate:
>40V/µs
Damping factor (8 Ω): >300
SN Rated (A weighed): 100 dB
IND SMPET@100W:
<0,05%
Dimensions:
19 inch x 47 x 13,6cm
Mounting depth:
47 cm
Weight:
30,10
DAP Xtreme-2400
DSP Controlled Stereo Power Amplifier
Interface-print, cable, and software included!
Inklusive Interface-Print, Kabel und Software!
Amplifiers
ORDERCODE:
D4174
Technical Information
8 Ω, 1 KHz, 0. 1%THD:
4 Ω, 1 KHz, 0. 1%THD:
2 Ω, 1 KHz, 0. 1%THD:
Bridge 8 Ω:
Bridge 4 Ω:
Input sensitivity:
Freq. resp.:
1250 Watt
1760 Watt
2500 Watt
3240 Watt
3800 Watt
1.1 V
20 Hz-2-KHz, +0, -1dB.
AT 1 Watt
THD (Below rated power, 1KHz): <0.05%
Slew rate:
>40V/µs
Damping factor (8 Ω): >300
SN Rated (A weighed): 100 dB
IND SMPET@100W:
<0,05%
Dimensions:
19 inch x 47 x 13,6cm
Mounting depth:
47 cm
Weight:
30,7
Gear
81
DAP
Au
di
o & Mo
Amplifiers
re
DAP Vintage Digital Power Series
The DAP Vintage Amps are digital Class-D high power amplifiers with PWM technology.
This device has a superior efficiency (90%), fidelity of signal, reliability and an extremely
high Freq. resp.. Furthermore, the DPA Vintage is equipped with a complete safety package
against temperature, overload, short circuit, equivalent voltage at the output and fast cut off if
there is a power failure. Two radial fans with high efficient air circulation front-to-rear provide
highest thermic stability. Even the changing of the dustfilter is very easy - you just have to
take off the front grille. You can see the operating mode for Signal, Limit and Protection on
a 4-character LED display per channel. The solid 19” metal housing of the DPA series is
equipped with an aluminium front panel, therefore it is light weight and compact. The device
has small dimensions and an excellent power/weight balance because there are no built-in
heavy transformers. On the rear panel, there are symmetrical electronic signal inputs via two
XLR- and two Jack input sockets and two outputs with locked speaker sockets. The DPA
amps are very reliable workstations, they are safe and have superior audio qualities. They are
suitable for compact- and multi purpose sound, rental, disco and live events.
Die DAP Vintage-Amps sind digitale Class-D Hochleistungs-Endstufen mit Schaltnetzteil-Technologie.
Sie zeichnen sich durch einen besonders hohen Wirkungsgrad (90%), Impulsfestigkeit, große Zuverlässigkeit und einen extrem hohen Frequenzgang aus. Außerdem ist ein komplettes Schutzschaltungs-Paket
gegen Überhitzung, Überladung, Kurzschluss, Gleichspannung am Ausgang und Schnellabschaltung bei
Netzausfall vorhanden. Zwei Radiallüfter mit hocheffizienter Luftzirkulation von vorne nach hinten sorgen für
optimale thermische Stabilität. Sogar das Austauschen der Staubfilter ist durch die abnehmbaren Frontgitter
kinderleicht geworden. Der Betriebsmodus für Signal, Limit und Protect wird pro Kanal über ein 4-stelliges
LED-Display angezeigt. Die stabilen 19” Metallgehäuse der DPA-Serie mit einem Einbaumaß von nur einer
Höheneinheit, die mit einer Aluminium-Frontplatte ausgestattet sind, sind leicht und kompakt. Da keine
schweren Transformatoren mehr eingebaut wurden, wird enorm viel Platz gespart und ein ausgezeichnetes Leistungs-Gewichtsverhältnis erreicht. Auf der Rückseite befinden sich elektronisch symmetrische
Signal-Eingänge über zwei XLR- und zwei Klinke-Einbaubuchsen und zwei Ausgänge über verriegelbare
Speaker-Buchsen. Kurz gesagt: Die DPA- Endstufen sind besonders zuverlässige Workstations mit höchster
Betriebssicherheit und überragenden Audio-Qualitäten. Sie sind geeignet für Kompakt- und MehrzweckBeschallung, Verleiher, Discos und Live-Veranstaltungen.
DAP DPA-1200 Vintage
Digital Stereo Poweramplifier
ORDERCODE:
D4180
1
HE
Technical Information
Power Output (RMS):
Stereo 4 Ωs 2 x 600 W
Stereo 8 Ωs 2 x 350 W
Freq. resp.:
Signal-to-Noise Ratio:
Total Harmonic Distortion:
Damping Factor:
Voltage Gain:
Slew Rate:
Crosstalk:
Input Sensitivity:
Input Impedance:
Input Connectors:
5 Hz - 30 kHz
>105 dB
0.1 %
>500
32 dB
40 V/msec.
>70 dB
1.1 V
10 kΩ
2 x XLR + 2J x
Jack mounting socket
2 x Speakon (stereo)
Output Connectors:
82
DAP
Gear
Protection:
Cooling:
Controls:
Indicators:
Construction:
Power Supply:
Power Consumption:
Built-in Dimension:
Total Dimension:
Weight:
Amplifiers
Overheat, overload, shortcircuit, DC, soft-start
2 radial fans, front-to-rear
Power switch, input
attenuators
Signal, Clip, Protect, 4-fold
LED-meter
Steel chassis, aluminium
front-panel
230 V AC, 50-60 Hz ~
1950 W
491 x 482 x 44mm
527 x 482 x 44mm
8,8 kg
(power/weight-relation: 60 W/kg)
19
INCH
Amplifiers
di
o & Mo
re
Au
DAP DPA-2400 Vintage
Digital Stereo Poweramplifier
ORDERCODE:
D4181
1
HE
19
INCH
Technical Information
Power Output (RMS):
Stereo 4 Ωs 2 x 1200 W
Stereo 8 Ωs 2 x 650 W
Freq. resp.:
Signal-to-Noise Ratio:
Total Harmonic Distortion:
Damping Factor:
Voltage Gain:
Slew Rate:
Crosstalk:
Input Sensitivity:
Input Impedance:
Input Connectors:
5 Hz - 30 kHz
>105 dB
0.1 %
>500
32 dB
40 V/msec.
>70 dB
1.1 V
10 kΩ
2 x XLR + 2J x
Jack mounting socket
2 x Speakon (stereo)
Output Connectors:
DAP DPA-3400 Vintage
Digital Stereo Poweramplifier
Protection:
Cooling:
Controls:
Indicators:
Construction:
Power Supply:
Power Consumption:
Built-in Dimension:
Total Dimension:
Weight:
Overheat, overload, shortcircuit, DC, soft-start
2 radial fans, front-to-rear
Power switch, input attenuators
Signal, Clip, Protect, 4-fold
LED-meter
Steel chassis, aluminium
front-panel
230 V AC, 50-60 Hz ~
3450 W
491 x 482 x 44mm
527 x 482 x 44mm
9,2 kg (Power/weight-relation: 120 W/kg)
ORDERCODE:
D4182
1
HE
19
INCH
Technical Information
Power Output (RMS):
Stereo 4 Ωs 2 x 1700 W
Stereo 8 Ωs 2 x 1000 W
Freq. resp.:
Signal-to-Noise Ratio:
Total Harmonic Distortion:
Damping Factor:
Voltage Gain:
Slew Rate:
Crosstalk:
Input Sensitivity:
Input Impedance:
Input Connectors:
5 Hz - 30 kHz
>105 dB
0.1 %
>500
32 dB
40 V/msec.
>70 dB
1.1 V
10 kΩs
2 x XLR/Jack mounting
socket
2 x Speakon (stereo)
Output Connectors:
Protection:
Cooling:
Controls:
Indicators:
Construction:
Power Supply:
Power Consump.:
Built-in Dimension:
Total Dimension:
Weight:
Amplifiers
Overheat, overload, short-circuit, DC,
soft-start
2 radial fans, front-to-rear
Power switch, input
attenuators
Signal, Clip, Protect, 4-fold
LED-meter
Steel chassis, aluminium
front-panel
230 V AC, 50-60 Hz ~
4600 W
491 x 482 x 44mm
527 x 482 x 44mm
9,5 kg
(power/weight-relation: 300 W/kg)
Gear
83
DAP