Cisco Catalyst 3560 Series Switches Data Sheet

Data Sheet
Cisco Catalyst 3560 Series Switches
Ready to Replace an Old Switch?
Consider next-generation Catalyst 3850 Series Switches which support BYOD/mobility and offer a
variety of performance, security, and operational enhancements versus previous models. Compare
now.
●
Identify obsolete or end-of-support switches with our FREE cloud-based service.
●
Get trade-in discounts when you buy new switches.
© 2009 Cisco Systems, Inc. All rights reserv ed. This doc ument is Cisco Public Inf ormation.
Page 1 of 23
Data Sheet
Cisco Catalyst 3560 Series Switches
Product Overview
The Cisco ® Catalyst® 3560 Series is a line of fixed-configuration, enterprise-class switches that
include IEEE 802.3af and Cisco prestandard Power over Ethernet (PoE) functionality in Fast
Ethernet and Gigabit Ethernet configurations. The Cis co Catalyst 3560 is an ideal access layer
switch for small enterprise LAN access or branch-office environments, combining both 10/100/1000
and PoE configurations for maximum productivity and investment protection while enabling the
deployment of new applications such as IP telephony, wireless access, video surveillance, building
management systems, and remote video kiosks. Customers can deploy networkwide intelligent
services-such as advanced quality of service (QoS), rate limiting, access control lists (AC Ls),
multicast management, and high-performance IP routing-while maintaining the simplicity of
traditional LAN switching. Available for the Cisco Catalyst 3560 Series at no charge, the Cisco
Network Assistant is a centralized management application that si mplifies the administration tasks
for Cisco switches, routers, and wireless access points. Cisco Network Assistant provides
configuration wizards that greatly simplify the implementation of converged networks and intelligent
network services.
The Cisco Catalyst 3560 is part of a larger and more scalable family of Cisco Catalyst switches that
includes the Cisco Catalyst 3560-E Series switches, the Cisco Catalyst 3750 and 3750-E Series
switches with Cisco StackWise ™ technology, and the Cisco Catalyst 4500 and Catalyst 6500
®
modular switches. United by Cisco IOS Software, the entire family offers industry-leading
availability, integrated security, optimized delivery, and manageability.
Configurations
The Cisco Catalyst 3560 Series comprises the following switch es (refer to Figure 1):
Figure 1.
●
Cisco Catalyst 3560 Sw itches
Cisco Catalyst 3560-8PC: 8 Ethernet 10/100 ports with PoE and 1 dual-purpose
10/100/1000 and SFP port; compact form factor with no fan
●
Cisco Catalyst 3560-12PC: 12 Ethernet 10/100 ports with PoE and 1 dual-purpose
10/100/1000 and SFP port; compact form factor with no fan
●
Cisco Catalyst 3560-24TS: 24 Ethernet 10/100 ports and 2 Small Form -Factor Pluggable
(SFP)-based Gigabit Ethernet ports; 1 rack unit (RU)
●
Cisco Catalyst 3560-48TS: 48 Ethernet 10/100 ports and 4 SFP-based Gigabit Ethernet
ports; 1RU
© 2009 Cisco Systems, Inc. All rights reserv ed. This document is Cisco Public Inf ormation.
Page 2 of 23
Data Sheet
●
Cisco Catalyst 3560-24PS: 24 Ethernet 10/100 ports with PoE and 2 SFP-based Gigabit
Ethernet ports; 1 RU
●
Cisco Catalyst 3560-48PS: 48 Ethernet 10/100 ports with PoE and 4 SFP-based Gigabit
Ethernet ports; 1RU
●
Cisco Catalyst 3560G-24TS: 24 Ethernet 10/100/1000 ports and 4 SFP-based Gigabit
Ethernet ports; 1RU
●
Cisco Catalyst 3560G-48TS: 48 Ethernet 10/100/1000 ports and 4 SFP-based Gigabit
Ethernet ports; 1RU
●
Cisco Catalyst 3560G-24PS: 24 Ethernet 10/100/1000 ports with PoE and 4 SFP-based
Gigabit Ethernet ports; 1RU
●
Cisco Catalyst 3560G-48PS: 48 Ethernet 10/100/1000 ports with PoE and 4 SFP-based
Gigabit Ethernet ports; 1RU
The Cisco Catalyst 3560 Series can be purchased with the IP Base or IP Services licenses pre installed. The IP Base license offers advanced QoS, rate limiting, ACLs, and basic static and
Routing Information Protocol (RIP) routing functions. The IP Services license provides a richer set
of enterprise-class features, including advanced hardware-based IPv6 unicast and IPv6 Multicast
routing as well as policy-based routing (PBR). The IP Services license upgrades Cisco Catalyst
3560 Series switches to include IPv6 routing support. Upgrade licenses are available to upgrade a
switch from the IP Base license to the IP Services license.
The SFP-based GE ports accommodate a range of SFP transceivers, including the Cisco
1000BASE-T, 1000BASE-SX, 1000BASE-LX, 1000BASE-ZX, and CWDM SFP transceivers. These
ports also support the Cisco Catalyst 3560 SFP Interconnect Cable for establishing a low -cost
Gigabit Ethernet point-to-point connection.
Power over Ethernet
The Cisco Catalyst 3560 Series can provide a lower total cost of ownership (TCO) for deployments
that incorporate Cisco IP phones, Cisco Aironet® wireless LAN (WLAN) access points, or any IEEE
802.3af-compliant end device. PoE removes the need for wall power to each PoE-enabled device
and eliminates the cost for additional electrical cabling that would otherwise be necessary in IP
phone and WLAN deployments. The Cisco Catalyst 3560 8 -port PoE and 24-port PoE
configurations can support 8 and 24 simultaneous full-powered PoE ports at 15.4W for maximum
powered-device support. The Cisco Catalyst 3560 12-port PoE can support 8 ports at 15.4W or 12
ports at 10W or any combination in between. Taking advantage of Cisco Catalyst Intelligent Power
Management, the 48-port PoE configurations can deliver the necessary power to support 24 ports
at 15.4W, 48 ports at 7.7W, or any combination in between. Maximum power availability for a
converged voice and data network is attainable when a Cisco Catalyst 3560 switch is co mbined
with the Cisco RPS 2300 Redundant Power System for transparent protection against internal
power supply failures and an uninterruptible power supply (UPS) system to safeguard against
power outages.
Gigabit Ethernet
At speeds of 1000 Mbps, Gigabit Ethernet provides the bandwidth to meet new and evolving
network demands, alleviate bottlenecks, and boost performance while increasing the return on
existing infrastructure investments. Today's workers are placing higher demands on networks,
running multiple, concurrent applications. For example, a worker joins a team conference call
through an IP videoconference, sends a 10-MB spreadsheet to meeting participants, broadcasts
© 2009 Cisco Systems, Inc. All rights reserv ed. This document is Cisco Public Inf ormation.
Page 3 of 23
Data Sheet
the latest marketing video for the team to evaluate, and queries the customer-relationshipmanagement database for the latest real-time feedback. Meanwhile, a multigigabyte system
backup starts in the background and the latest virus updates are delivered to the client. The Cisco
Catalyst 3560 provides a means to intelligently scale the ne twork beyond 100 Mbps over existing
Category 5 copper cabling and simultaneously support PoE for maximum productivity and
investment protection.
Intelligence in the Network
Networks of today are evolving to address four new developments at the network edge :
●
Increase in desktop computing power
●
Introduction of bandwidth-intensive applications
●
Expansion of highly sensitive data on the network
●
Presence of multiple device types, such as IP phones, WLAN access points, and IP video
cameras
These new demands are contending for resources with many existing mission-critical applications.
As a result, IT professionals must view the edge of the network as critical to effectively manage the
delivery of information and applications.
As companies increasingly rely on networks as the strategic business infrastructure, it is more
important than ever to help ensure their high availability, security, scalability, and control. By adding
Cisco intelligent functions for LAN access, customers can now deploy networkwide intelligent
services that consistently address these requirements from the desktop to the core and through the
WAN.
With Cisco Catalyst Intelligent Ethernet switches, Cisco Systems ® helps enable companies to
realize the full benefits of adding intelligent services into their networks. Deployment of capabilities
that make the network infrastructure highly available to accommodate time -critical needs, scalable
to accommodate growth, secure enough to protect confidential information, and capable of
differentiating and controlling traffic flows is critical to further optimizing network operations.
Cisco EnergyWise Technology
Cisco EnergyWise is an innovative architecture, added to the Cisco Catalyst 3560 switches,
promoting companywide sustainability by reducing energy cons umption across an entire corporate
infrastructure and affecting more than 50 percent of global greenhouse gas emissions created by
worldwide building infrastructure, a much greater effect than the 2 percent generated by the IT
industry. Cisco EnergyWise enables companies to measure the power consumption of network
infrastructure and network-attached devices and manage power consumption with specific policies,
reducing power consumption to realize increased cost savings, potentially affecting any powered
device.
EnergyWise encompasses a highly intelligent network based approach to communicate messages
that measure and control energy between network devices and endpoints. The network discovers
Cisco EnergyWise manageable devices, monitors their power consumption, and takes action
based on business rules to reduce power consumption. EnergyWise uses a unique domain -naming
system to query and summarize information from large sets of devices, making it simpler than
traditional network management capabilities. Cisco EnergyWise’s management interfaces allow
facilities and network management applications to communicate with endpoints and each other
© 2009 Cisco Systems, Inc. All rights reserv ed. This document is Cisco Public Inf ormation.
Page 4 of 23
Data Sheet
using the network as a unifying fabric. The management interface uses standard SNMP or SSL to
integrate Cisco and third-party management systems.
Cisco EnergyWise extends the network as a platform for power control plane for gathering,
managing, and reducing power consumption of all devices, resulting in companywide optimized
power delivery and reduced energy costs.
Enhanced Security
With the wide range of security features that the Cisco Catalyst 3560 Series offers, businesses can
protect important information, keep unauthorized people off the network, guard privacy, and
maintain uninterrupted operation.
Cisco Identity Based Networking Services (IBNS) provides authentication, access control, and
security policy administration to secure network connectivity and resources. Cisco IBNS in the
Cisco Catalyst 3560 Series prevents unauthorized access and helps ensure that users get only
their designated privileges. It provides the ability to dynamically administer granular levels of
network access. Using the 802.1x standard and the Cisco Access Control Server (ACS), users can
be assigned a VLAN or an ACL upon authentication, regardle ss of where they connect to the
network. This setup allows IT departments to enable strong security policies without compromising
user mobility-and with minimal administrative overhead.
To guard against denial-of-service and other attacks, ACLs can be used to restrict access to
sensitive portions of the network by denying packets based on source and destination MAC
addresses, IP addresses, or TCP/UDP ports. ACL lookups are done in hardware, so forwarding
performance is not compromised when implementing ACL-based security.
Port security can be used to limit access on an Ethernet port based on the MAC address of the
device to which it is connected. It also can be used to limit the total number of devices plugged into
a switch port, thereby protecting the switch from a MAC flooding attack as well as reducing the
risks of rogue wireless access points or hubs.
With Dynamic Host Configuration Protocol (DHCP) snooping, DHCP spoofing can be thwarted by
allowing only DHCP requests (but not responses) from untrusted us er-facing ports. Additionally, the
DHCP Interface Tracker (Option 82) helps enable granular control over IP address assignment by
augmenting a host IP address request with the switch port ID. Building further on the DHCP
snooping capabilities, IP address s poofing can be thwarted using Dynamic ARP Inspection and IP
Source Guard.
The MAC Address Notification feature can be used to monitor the network and track users by
sending an alert to a management station so that network administrators know when and where
users entered the network. The Private VLAN feature isolates ports on a switch, helping ensure
that traffic travels directly from the entry point to the aggregation device through a virtual path and
cannot be directed to another port.
Secure Shell (SSH) Protocol Version 2, Kerberos, and Simple Network Management Protocol
Version 3 (SNMPv3) encrypt administrative and network-management information, protecting the
network from tampering or eavesdropping. TACACS+ or RADIUS authentication enables
centralized access control of switches and restricts unauthorized users from altering the
configurations. Alternatively, a local username and password database can be configured on the
switch itself. Fifteen levels of authorization on the switch console and two levels on the Web-based
© 2009 Cisco Systems, Inc. All rights reserv ed. This document is Cisco Public Inf ormation.
Page 5 of 23
Data Sheet
management interface provide the ability to give different levels of configuration capabilities to
different administrators.
Availability and Scalability
The Cisco Catalyst 3560 Series is equipped with a robust set of features that allow for network
scalability and higher availability through IP routing as well as a complete suite of Spanning Tree
Protocol enhancements aimed to maximize availability in a Layer 2 network.
The Cisco Catalyst 3560 switches deliver high-performance, hardware-based IP routing. The Cisco
Express Forwarding-based routing architecture allows for increased scalability and performance.
This architecture allows for very high-speed lookups while also helping ensure the stability and
scalability necessary to meet the needs of future requirements. In addition to dynamic IP unicast
routing, the Cisco Catalyst 3560 Series is perfectly equipped for networks requiring multicast
support. Protocol Independent Multicast (PIM) and Internet Group Management Protocol (IGMP)
snooping in hardware make the Cisco Catalyst 3560 Series switches ideal for intensive multicast
environments.
Implementing routed uplinks to the core improves network availability by enabling faster failover
protection and simplifying the Spanning Tree Protocol algorithm by terminating all Spanning Tree
Protocol instances at the aggregator switch. If one of the uplinks fails, quicker failover to the
redundant uplink can be achieved with a scalable routing protocol such as Open Shortest Path First
(OSPF) or Enhanced Interior Gateway Routing Protocol (EIGRP) rather than relying on standard
Spanning Tree Protocol convergence. Redirection of a packet after a link failure using a routing
protocol results in faster failover than a solution that uses Layer 2 spanning-tree enhancements.
Additionally, routed uplinks allow better bandwidth use by implementing equal cost routing (ECR)
on the uplinks to perform load balancing. Routed uplinks optimize the utility of uplinks out of the
LAN Access by eliminating unnecessary broadcast data flows into the network backbone.
The Cisco Catalyst 3560 also offers dramatic bandwidth savings as a wiring -closet switch in a
multicast environment. Using routed uplinks to the network core eliminates the requirement to
transmit multiple streams of the same multicast from the upstream content servers to LAN access
switches. For example, if three users are assigned to three separate VLANs and they all want to
view multicast ABC, then three streams of multicast ABC must be transmitted from the upstre am
router to the wiring-closet switch-assuming the wiring-closet switch is not capable of routed uplinks.
Deploying IP routing to the core with Cisco Catalyst 3560 switches allows users to create a
scalable, multicast-rich network. The Cisco IP Services license offers IPv6 routing , including
support for simultaneous IPv4 and IPv6 forwarding. IPv6 protocol support includes OSPFv3, and
EIGRPv6. IPv6 management and MLD Snooping are supported on all Cisco Catalyst 3560
software images.
Enhancements to the standard Spanning Tree Protocol, such as Per-VLAN Spanning Tree Plus
(PVST+), Uplink Fast, and PortFast, maximize network uptime. PVST+ allows for Layer 2 load
sharing on redundant links to efficiently use the extra capacity inherent in a redundant design.
Uplink Fast, PortFast, and BackboneFast all greatly reduce the standard 30 - to 60-second
Spanning Tree Protocol convergence time. Loop guard and bridge -protocol-data-unit (BPDU) guard
provide Spanning Tree Protocol loop avoidance.
© 2009 Cisco Systems, Inc. All rights reserv ed. This document is Cisco Public Inf ormation.
Page 6 of 23
Data Sheet
Advanced QoS
The Cisco Catalyst 3560 offers superior multilayer, granular QoS features to help ensure that
network traffic is classified and prioritized, and that congestion is avoided in the best possible
manner. Configuration of QoS is greatly simplified through automatic QoS (Auto QoS), a feature
that detects Cisco IP phones and automatically configures the switch for the appropriate
classification and egress queuing. This optimizes traffic prioritization and network availability
without the challenge of a complex configuration.
The Cisco Catalyst 3560 can classify, reclassify, police, mark, queue, and schedule incoming
packets, and can queue and schedule packets at egress. Packet classification allows the network
elements to discriminate between various traffic flows and enforce po licies based on Layer 2 and
Layer 3 QoS fields.
To implement QoS, the Cisco Catalyst 3560 Series Switch first identifies traffic flows or packet
groups, and classifies or reclassifies these groups using the Differentiated Services Code Point
(DSCP) field or the 802.1p Class of Service (CoS) field. Classification and reclassification can be
based on criteria as specific as the source or destination IP address, source or destination MAC
address, or the Layer 4 TCP or UDP port. At the ingress, the Cisco Catalyst 3560 also polices to
determine whether a packet is in or out of profile, marks to change the classification label, passes
through or drops out of profile packets, and queues packets based on classification. Control - and
data-plane ACLs are supported on all ports to help ensure proper treatment on a per-packet basis.
The Cisco Catalyst 3560 supports four egress queues per port, allowing the network administrator
to be more discriminating and specific in assigning priorities for the various applications on the
LAN. At egress, the switch performs scheduling and congestion control. Scheduling is an algorithm
or process that determines the order in which the queues are processed. The Cisco Catalyst 3560
Series Switch supports shaped round robin (SRR) and strict priority queuing. The SRR algorithm
helps ensure differential prioritization.
These QoS features allow network administrators to prioritize mission-critical and bandwidthintensive traffic, such as enterprise resource planning (ERP) (Oracle, etc.), voice (IP telephony
traffic), and computer-aided design (CAD) or computer-aided manufacturing (CAM) over less -timesensitive applications such as FTP or e-mail. For example, it would be highly undesirable to have a
large file download destined to one port on a wiring-closet switch and have quality implications
such as increased latency in voice traffic destined to another port on this switch. This condition is
avoided by making sure that voice traffic is properly classified and prioritized throughout the
network. Other applications, such as Web browsing, can be treated as low priority and handled on
a best-effort basis.
The Cisco Catalyst 3560 Series can perform rate limiting through its support of the Cisco
Committed Information Rate (CIR) function. Through CIR, bandwidth can be guaranteed in
increments as low as 8 kbps. Bandwidth can be allocated based on several criteria, including MAC
source address, MAC destination address, IP source address, IP destination address, and TCP or
UDP port number. Bandwidth allocation is essential when network environments require servicelevel agreements or when it is necessary for the network manager to control the bandwidth given to
certain users.
© 2009 Cisco Systems, Inc. All rights reserv ed. This document is Cisco Public Inf ormation.
Page 7 of 23
Data Sheet
Management
The new Cisco Express Setup feature simplifies the initial configurati on of a switch. Users now
have the option to set up the switch through a Web browser, eliminating the need for more complex
terminal-emulation programs and knowledge of the command-line interface (CLI). Cisco Express
Setup reduces the cost of deployment by helping less-skilled personnel quickly and simply set up
switches.
Cisco Network Assistant is a PC-based network-management application optimized for LANs of
small and medium-sized businesses with up to 250 users. Cisco Network Assistant offers
centralized management of Cisco switches, routers, and WLAN access points. It supports a wide
range of Cisco Catalyst intelligent switches from Cisco Catalyst 2950 through Cisco Catalyst 4506.
Through a user-friendly GUI, users can configure and manage a wide array of switch functions and
start the device manager of Cisco routers and Cisco wireless access points. A few mouse clicks
enable the Cisco recommended security, availability, and QoS features without the need to consult
a detailed design guide. The Security wizard automatically restricts unauthorized access to servers
with sensitive data. Smartports and wizards save hours of time for network administrators,
eliminate human errors, and help ensure that the configuration of the switch is optimized for these
applications. Available at no cost, Cisco Network Assistant can be downloaded from Cisco.com.
In addition to the Cisco Network Assistant, the Cisco Catalyst 3560 Series switches provide for
extensive management using SNMP network-management platforms such as CiscoWorks LAN
Management Solution (LMS). LMS is a suite of powerful management tools that simplify the
configuration, administration, monitoring, and troubleshooting of Cisco networks. It integrates these
capabilities into a world-class solution for improving the accuracy and efficiency of your operations
staff, while increasing the overall availability of your network. LMS supports over 400 different
device types providing:
●
Network discovery, topology views, end-station tracking, and VLAN management
●
Real-time network fault analysis with easy-to-deploy device specific best-practice templates
●
Hardware and software inventory management, centralized configuration tools, and syslog
monitoring
●
Network response time and availability monitoring and tracking
●
Real-time device, link, and port traffic management, analysis, and reporting
Cisco Catalyst 3560 SFP Interconnect Cable
The Cisco Catalyst 3560 SFP Interconnect Cable (see Figure 2) provides for a low -cost point-topoint Gigabit Ethernet connection between Cisco Catalyst 3560 switches. The 50cm cable is an
alternative to using SFP transceivers when interconnecting Cisco Catalyst 3560 switches through
their SFP ports over a short distance.
© 2009 Cisco Systems, Inc. All rights reserv ed. This document is Cisco Public Inf ormation.
Page 8 of 23
Data Sheet
Figure 2.
Cisco Catalyst 3560 SFP Interconnect Cable
Table 1 gives the features and benefits of the Cisco Catalyst 3560 Series. Table 2 gives the
hardware specifications, and Table 3 gives the power specifications. Table 4 lists the management
and standards support, and Table 5 provides the safety and compliance information.
Table 1.
Features and Benefits of Cisco Catalyst 3560 Series
Feature
Ease of Use and Deployment
Benefit
● Cisco Express Setup simplif ies initial conf iguration with a Web browser, eliminating the
need f or more complex terminal emulation programs and CLI knowledge.
● IEEE 802.3af and Cisco prestandard PoE support comes with automatic discov ery to
detect a Cisco prestandard or IEEE 802.3af endpoint and prov ide the necessary power
without any user conf iguration.
● DHCP autoconf iguration of multiple switches through a boot serv er eases switch
deploy ment.
● Automatic QoS (Auto QoS) simplif ies QoS conf iguration in v oice-ov er-IP (VoIP)
networks by issuing interf ace and global switch commands to detect Cisco IP phones,
classif y traffic, and enable egress queue conf iguration.
● Autosensing on each 10/100 port detects the speed of the attached dev ice and
automatically conf igures the port f or 10- or 100-Mbps operation, easing switch
deploy ment in mixed 10- and 100-Mbps env ironments.
● Autonegotiating on all ports automatically selects half - or f ull-duplex transmission mode
to optimize bandwidth.
● Dy namic Trunking Protocol (DTP) helps enable dy namic trunk conf iguration across all
switch ports.
● Port Aggregation Protocol (PAgP) automates the creation of Cisco Fast EtherChannel ®
groups or Gigabit EtherChannel groups to link to another switch, router, or serv er.
● Link Aggregation Control Protocol (LACP) allows the creation of Ethernet channeling
with dev ices that conf orm to IEEE 802.3ad. This f eature is similar to Cisco
EtherChannel technology and PAgP.
● DHCP Serv er enables a conv enient deploy ment option f or the assignment of IP
addresses in networks that do not hav e a dedicated DHCP serv er.
● DHCP Relay allows a DHCP relay agent to broadcast DHCP requests to the network
DHCP serv er.
● IEEE 802.3z-compliant 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-ZX, 1000BASET, and coarse wav elength-div ision multiplexing (CWDM) phy sical interf ace support
through a f ield-replaceable SFP module prov ides unprecedented f lexibility in switch
deploy ment.
● Support f or the Cisco Cataly st 3560 SFP Interconnect Cable f acilitates a low-cost,
point-to-point gigabit connection between Cisco Cataly st 3560 Series switches.
● The def ault conf iguration stored in Flash memory helps ensure that the switch can be
quickly connected to the network and can pass traf f ic with minimal user interv ention.
● Automatic medium-dependent interf ace crossov er (Auto-MDIX) automatically adjusts
transmit and receiv e pairs if an incorrect cable ty pe (crossov er or straight -through) is
installed on a 10/100 port.
● Time Domain Ref lectometry (TDR) to diagnose and resolv e cabling problems on
copper Ethernet 10/100/1000 ports.
Cisco EnergyWise
● Cisco Energy Wise f or greenhouse gas emissions and operational cost optimization by
measuring, reporting, and reducing energy consumption across the entire corporate
inf rastructure, well bey ond the scope of IT.
© 2009 Cisco Systems, Inc. All rights reserv ed. This document is Cisco Public Inf ormation.
Page 9 of 23
Data Sheet
Availability and Scalability
Superior Redundancy for
Fault Backup
● Cisco Uplink Fast and BackboneFast technologies help ensure quick f ailov er recov ery,
enhancing ov erall network stability and reliability .
● IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) prov ides rapid spanning-tree
conv ergence independent of spanning-tree timers and the benef it of distributed
processing.
● Per-VLAN Rapid Spanning Tree Plus (PVRST+) allows rapid spanning-tree
reconv ergence on a per-VLAN spanning-tree basis, without requiring the
implementation of spanning-tree instances.
● Cisco Hot Standby Router Protocol (HSRP) is supported to create redundant, f ail-saf e
routing topologies.
● Command-switch redundancy enabled in Cisco Network Assistant sof tware allows
designation of a backup command switch that takes ov er cluster-management
f unctions if the primary command switch f ails.
● Unidirectional Link Detection Protocol (UDLD) and Aggressiv e UDLD allow
unidirectional links to be detected and disabled to av oid problems such as spanningtree loops.
● Switch port autorecov ery (errdisable) automatically attempts to reenable a link that is
disabled because of a network error.
● Cisco RPS 2300 support prov ides superior internal power-source redundancy , resulting
in improv ed f ault tolerance and network uptime.
● Equal cost routing (ECR) prov ides load balancing and redundancy .
● Bandwidth aggregation up to 8 Gbps through Cisco Gigabit EtherChannel technology
and up to 800 Mbps through Cisco Fast EtherChannel technology enhances f ault
tolerance and of f ers higher-speed aggregated bandwidth between switches and to
routers and indiv idual serv ers.
High-Performance IP Routing
● Cisco Express Forwarding hardware routing architecture deliv ers extremely highperf ormance IP routing.
● Basic IP unicast routing protocols (static, RIPv 1, RIPv2 and RIPng) are supported f or
small-network routing applications.
● Adv anced IP unicast routing protocols (OSPF, Interior Gateway Routing Protocol
[IGRP], EIGRP, Border Gateway Protocol Version 4 [BGPv 4] and IS-ISv 4) are
supported f or load balancing and constructing scalable LANs. The IP Serv ices license
is required.
● IPv 6 routing capability (OSPFv 3, EIGRPv 6) is support. IP Serv ices license is required.
● Policy -Based Routing (PBR) allows superior control by enabling f low redirection
regardless of the routing protocol conf igured.
● Inter-VLAN IP routing prov ides f or f ull Lay er 3 routing between two or more VLANs.
● Protocol Independent Multicast (PIM) f or IP Multicast routing is supported, including
PIM sparse mode (PIM-SM), PIM dense mode (PIM-DM), and PIM sparse-dense
mode. The IP Serv ices license is required.
● Fallback bridging f orwards non-IP traf f ic between two or more VLANs.
Integrated Cisco IOS Software
Features for Bandwidth
Optimization
● Per-port broadcast, multicast, and unicast storm control prev ents f aulty end stations
f rom degrading ov erall sy stems performance.
● IEEE 802.1d Spanning Tree Protocol support f or redundant backbone connections and
loop-f ree networks simplif ies network conf iguration and improv es f ault tolerance.
● PVST+ allows f or Lay er 2 load sharing on redundant links to ef f iciently use the extra
capacity inherent in a redundant design.
● IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) allows a spanning-tree instance
per VLAN, enabling Lay er 2 load sharing on redundant links.
● ECR prov ides load balancing and redundancy .
● VPN routing/f orwarding (VRF)-Lite enables a serv ice prov ider to support two or more
VPNs, with ov erlapping IP addresses.
● Local Proxy Address Resolution Protocol (ARP) works in conjunction with Priv ate
VLAN Edge to minimize broadcasts and maximize av ailable bandwidth.
● VLAN1 minimization allows VLAN1 to be disabled on any indiv idual VLAN trunk link.
● VLAN Trunking Protocol (VTP) pruning limits bandwidth consumption on VTP trunks by
f looding broadcast traf f ic only on trunk links required to reach the destination dev ices.
● Internet Group Management Protocol v 3 (IGMP) Snooping f or IPv 4 and IPv 6 MLD v 1
and v 2 Snooping prov ide f ast client joins and leav es of multicast streams and limits
bandwidth-intensiv e v ideo traf f ic to only the requestors.
● IGMP f iltering prov ides multicast authentication by f iltering out nonsubscribers and
limits the number of concurrent multicast streams av ailable per port.
● Multicast VLAN registration (MVR) continuously sends multicast streams in a multicast
VLAN while isolating the streams f rom subscriber VLANs f or bandwidth and security
reasons.
© 2009 Cisco Systems, Inc. All rights reserv ed. This document is Cisco Public Inf ormation.
Page 10 of 23
Data Sheet
QoS and Control
Advanced QoS
● Standard 802.1p CoS and DSCP f ield classif ication are prov ided, using marking and
reclassif ication on a per-packet basis by source and destination IP address, source and
destination MAC address, or Lay er 4 TCP or UDP port number.
● Cisco control- and data-plane QoS ACLs on all ports help ensure proper marking on a
per-packet basis.
● Four egress queues per port enable dif f erentiated management of up to f our traf f ic
ty pes.
● SRR scheduling helps ensure dif f erential prioritization of packet f lows by intelligently
serv icing the ingress and egress queues.
● Weighted tail drop (WTD) prov ides congestion av oidance at the ingress and egress
queues bef ore a disruption occurs.
● Strict priority queuing guarantees that the highest-priority packets are serv iced ahead
of all other traf f ic.
● There is no perf ormance penalty f or highly granular QoS f unctions.
Granular Rate Limiting
● The Cisco Committed Inf ormation Rate (CIR) f unction guarantees bandwidth in
increments as low as 8 kbps.
● Rate limiting is prov ided based on source and destination IP address, source and
destination MAC address, Lay er 4 TCP and UDP inf ormation, or any combination of
these f ields, using QoS ACLs (IP ACLs or MAC ACLs), clas s maps, and policy maps.
● Asy nchronous data f lows upstream and downstream f rom the end station or on the
uplink are easily managed using ingress policing and egress shaping.
● Up to 64 aggregate or indiv idual policers are av ailable per Fast Ethernet or Gigabit
Ethernet port.
Security
Networkwide Security
Features
● IEEE 802.1x allows dy namic, port-based security , prov iding user authentication.
● IEEE 802.1x with VLAN assignment allows a dy namic VLAN assignment f or a specif ic
user regardless of where the user is connected.
● IEEE 802.1x with v oice VLAN permits an IP phone to access the v oice VLAN
irrespectiv e of the authorized or unauthorized state of the port.
● IEEE 802.1x and port security are prov ided to authenticate the port and manage
network access f or all MAC addresses, including those of the client.
● IEEE 802.1x with an ACL assignment allows f or specif ic identity -based security policies
regardless of where the user is connected.
● IEEE 802.1x with Guest VLAN allows guests without 802.1x clients to hav e limited
network access on the guest VLAN.
● Web authentication f or non-802.1x clients allows non-802.1x clients to use an SSLbased browser f or authentication.
● Multi-Domain Authentication allows an IP phone and a PC to authenticate on the same
switch port while placing them on appropriate Voice and Data VLAN.
● MAC Auth By pass (MAB) f or v oice allows third-party IP phones without an 802.1x
supplicant to get authenticated using their MAC address.
● Cisco security VLAN ACLs (VACLs) on all VLANs prev ent unauthorized data f lows f rom
being bridged within VLANs.
● Cisco standard and extended IP security router ACLs (RACLs) def ine security policies
on routed interf aces f or control- and data-plane traf f ic.
● Port-based ACLs (PACLs) f or Lay er 2 interf aces allow application of securit y policies
on indiv idual switch ports.
● Unicast MAC f iltering prev ents the f orwarding of any ty pe of packet with a matching
MAC address.
● Unknown unicast and multicast port blocking allows tight control by f iltering packets
that the switch has not already learned how to f orward.
● SSHv 2, Kerberos, and SNMPv 3 prov ide network security by encry pting administrator
traf f ic during Telnet and SNMP sessions. SSHv 2, Kerberos, and the cry ptographic
v ersion of SNMPv 3 require a special cry ptographic sof tware image because of U.S.
export restrictions.
● Priv ate VLAN Edge prov ides security and isolation between switch ports, helping
ensure that users cannot snoop on other users' traf f ic.
● Priv ate VLANs restrict traf f ic between hosts in a common segment by segregating
traf f ic at Lay er 2, turning a broadcast segment into a nonbroadcast multi-access-like
segment.
● Bidirectional data support on the Switched Port Analy zer (SPAN) port allows the Cisco
Secure Intrusion Detection Sy stem (IDS) to take action when an intruder is detected.
● TACACS+ and RADIUS authentication enable centralized control of the switch and
restrict unauthorized users f rom altering the conf iguration.
● MAC address notif ication allows administrators to be notif ied of users added to or
remov ed f rom the network.
● Dy namic ARP Inspection (DAI) helps ensure user integrity by prev enting malicious
users f rom exploiting the insecure nature of the ARP protocol.
© 2009 Cisco Systems, Inc. All rights reserv ed. This document is Cisco Public Inf ormation.
Page 11 of 23
Data Sheet
● DHCP snooping allows administrators to help ensure consistent mapping of IP to MAC
addresses. This can be used to prev ent attacks that attempt to poison the DHCP
binding database, and to rate limit the amount of DHCP traf f ic that enters a switch port.
● IP source guard prev ents a malicious user f rom spoof ing or taking ov er another user's
IP address by creating a binding table between the client's IP and MAC address, port,
and VLAN.
● DHCP Interf ace Tracker (Option 82) augments a host IP address request with the
switch port ID.
● Port security secures the access to an access or trunk port based on MAC address.
● Af ter a specif ic timef rame, the aging f eature remov es the MAC address f rom the switch
to allow another dev ice to connect to the same port.
● Trusted Boundary prov ides the ability to trust the QoS priority settings if an IP phone is
present and to disable the trust setting if the IP phone is remov ed, thereby prev enting a
malicious user f rom ov erriding prioritization policies in the network.
● Multilev el security on console access prev ents unauthorized users f rom altering the
switch conf iguration.
● The user-selectable address-learning mode simplif ies conf iguration and enhances
security .
● BPDU Guard shuts down Spanning Tree Protocol PortFast -enabled interf aces when
BPDUs are receiv ed to av oid accidental topology loops.
● Spanning-Tree Root Guard (STRG) prev ents edge dev ices not in the network
administrator's control f rom becoming Spanning Tree Protocol root nodes.
● IGMP f iltering prov ides multicast authentication by f iltering out nonsubscribers and
limits the number of concurrent multicast streams av ailable per port.
● Dy namic VLAN assignment is supported through implementation of VLAN Membership
Policy Serv er (VMPS) client f unctions to prov ide f lexibility in assigning ports to VLANs.
Dy namic VLAN helps enable the f ast assignment of IP addresses.
● Cisco Network Assistant sof tware security wizards ease the deploy ment of security
f eatures f or restricting user access to a serv er as well as to a portion of or the entire
network.
● Two thousand access control entries (ACEs) are supported.
Manageability
Superior Manageability
● Cisco IOS CLI support prov ides a common user interf ace and command set with all
Cisco routers and Cisco Cataly st desktop switches.
● Cisco Discov ery Protocol v ersion 2 (CDPv 2) allows the Cisco Cataly st 3560 Series
Switch to negotiate a more granular power setting when connecting to a Cis co powered
dev ice, such as IP phones or access points, than what is prov ided by IEEE
classif ication.
● The PoE MIB prov ides proactiv e v isibility into power usage and allows customers to set
dif f erent power lev el thresholds.
● Switching Database Manager templates f or access, routing, and VLAN deploy ment
scenarios allow the administrator to easily maximize memory allocation to the desired
f eatures based on deploy ment-specif ic requirements.
● Generic On-Line Diagnostic (GOLD) checks the health of hardware components and
v erif ies proper operation of the system data and control plane at run time and boot time.
● VLAN trunks can be created f rom any port, using either standards -based 802.1Q
tagging or the Cisco Inter-Switch Link (ISL) VLAN architecture.
● Up to 1024 VLANs and up to 128 spanning-tree instances per switch are supported.
● Four thousand VLAN IDs are supported.
● Voice VLAN simplif ies telephony installations by keeping v oice traf f ic on a separate
VLAN f or easier administration and troubleshooting.
● Cisco VTP supports dy namic VLANs and dy namic trunk conf iguration across all
switches.
● IGMPv 3 snooping prov ides f ast client joins and leav es of multicast streams and limits
bandwidth-intensiv e v ideo traf f ic to only the requestors.
● Remote SPAN (RSPAN) allows administrators to remotely monitor ports in a Lay er 2
switch network f rom any other switch in the same network.
● For enhanced traf f ic management, monitoring, and analy sis, the Embedded Remote
Monitoring (RMON) sof tware agent supports f our RMON groups (history , statistics,
alarms, and ev ents).
● Lay er 2 traceroute eases troubleshooting by identif y ing the phy sical path that a packet
takes f rom source to destination.
● All nine RMON groups are supported through a SPAN port, which permits traf f ic
monitoring of a single port, a group of ports f rom a single network analy zer or RMON
probe.
● Domain Name Sy stem (DNS) prov ides IP address resolution with user-def ined dev ice
names.
● Triv ial File Transf er Protocol (TFTP) reduces the cost of administering sof tware
upgrades by downloading f rom a centralized location.
● Network Timing Protocol (NTP) prov ides an accurate and consistent timestamp to all
intranet switches.
© 2009 Cisco Systems, Inc. All rights reserv ed. This document is Cisco Public Inf ormation.
Page 12 of 23
Data Sheet
● Multif unction LEDs per port f or port status; half -duplex and f ull-duplex mode; and
10BASE-T, 100BASE-TX, and 1000BASE-T indication as well as switch-lev el status
LEDs f or sy stem, redundant power supply , and bandwidth use prov ide a
comprehensiv e and conv enient v isual management sy stem.
Cisco Network
Assistant Software
● Cisco Network Assistant is a f ree, Windows-based application that simplif ies the
administration of networks of up to 250 users. It supports a wide range of Cisco
Cataly st intelligent switches f rom Cisco Cataly st 2950 through Cisco Cataly st 4506.
With Cisco Network Assistant, users can manage Cisco Cataly st switches plus launch
the dev ice managers of Cisco integrated serv ices routers (ISRs) and Cisco Aironet
WLAN access points.
● The easy -to-use graphical interf ace prov ides both a topology map and f ront -panel v iew
of the switch.
● Cisco AVVID (Architecture f or Voice, Video and Integrated Data) wizards need just a
f ew user inputs to automatically conf igure the switch to optimally handle dif f erent ty pes
of traf fic: voice, video, multicast, and high-priority data.
● A security wizard is prov ided to restrict unauthorized access to applications, serv ers,
and networks.
● Upgrading the Cisco IOS Sof tware on Cisco Cataly st switches is a simple matter of
pointing and clicking, with one-click upgrades.
● Cisco Network Assistant supports multilay er f eature conf igurations such as routing
protocols, ACLs, and QoS parameters.
● Multidev ice and multiport conf iguration capabilities allow administrators to sav e time by
conf iguring f eatures across multiple switches and ports simultaneously .
● The user-personalized interf ace allows modif ication of polling interv als, table v iews,
and other settings.
● Alarm notif ication prov ides automated e-mail notif ication of network errors and alarm
thresholds.
Cisco Express Setup
● Cisco Express Setup simplif ies initial conf iguration of a switch through a Web browser,
eliminating the need f or more complex terminal emulation programs and CLI
knowledge.
● The Web interf ace helps less-skilled personnel quickly and simply set up switches,
thereby reducing the cost of deploy ment.
CiscoWorks Support
● CiscoWorks network-management sof tware prov ides management capabilities on a
per-port and per-switch basis, prov iding a common management interf ace f or Cisco
routers, switches, and hubs.
● SNMP v 1, v 2c, and v 3 and Telnet interf ace support deliv ers comprehensiv e in-band
management, and a CLI-based management console prov ides detailed out-of -band
management.
● Cisco Discov ery Protocol Versions 1 and 2 help enable a CiscoWorks network management station f or automatic switch discov ery .
● The CiscoWorks LAN Management Solution supports the Cisco Cataly st 3560 Series.
Table 2.
Cisco Catalyst 3560 Series Sw itch Hardware
Description
Performance
Specification
● 32 Gbps f orwarding bandwidth
● Forwarding rate based on 64-by te packets:
● 38.7 Mpps (Cisco Cataly st 3560G-48TS, Cataly st 3560G-48PS, Cataly st 3560G-24TS,
and Cataly st 3560G-24PS);
● 13.1 Mpps (Cisco Cataly st 3560-48TS and Cataly st 3560-48PS);
● 6.5 Mpps (Cisco Cataly st 3560-24TS and Cataly st 3560-24PS);
● 3.2 Mpps (Cisco Cataly st 3560-12PC)
● 2.7 Mpps (Cisco Cataly st 3560-8PC)
● 128 MB DRAM
● 32 MB Flash memory (Cisco Cataly st 3560G-24TS, Cataly st 3560G-24PS, Cataly st
3560G-48TS, Cataly st 3560G-48PS, Cataly st 3560-24TS, Cataly st 3560-48TS, and
Cataly st 3560-8PC);
● 16-MB Flash memory (Cisco Cataly st 3560-48PS and Cataly st 3560-24PS)
● Conf igurable up to 12,000 MAC addresses
● Conf igurable up to 11,000 unicast routes
● Conf igurable up to 1000 IGMP groups and multicast routes
● Conf igurable maximum transmission unit (MTU) of up to 9000 by tes, with a maximum
Ethernet f rame size of 9018 by tes (Jumbo f rames), f or bridging on Gigabit Ethernet
ports, and up to 1546 by tes f or bridging of Multiprotocol Label Switching (MPLS)
tagged f rames on 10/100 ports
Connectors and Cabling
● 10BASE-T ports: RJ-45 connectors, two-pair Category 3, 4, or 5 unshielded twistedpair (UTP) cabling
● 10BASE-T PoE ports: RJ-45 connectors, two-pair Category 3, 4, or 5 UTP cabling
power pins 1,2 (negativ e) and 3,6 (positiv e)
© 2009 Cisco Systems, Inc. All rights reserv ed. This document is Cisco Public Inf ormation.
Page 13 of 23
Data Sheet
● 100BASE-TX ports: RJ-45 connectors, two-pair Category 5 UTP cabling
● 100BASE-TX PoE ports: RJ-45 connectors, two-pair Category 5 UTP cabling, power on
pins 1,2 (negativ e) and 3,6 (positiv e)
● 1000BASE-T ports: RJ-45 connectors, f our-pair Category 5 UTP cabling
● 1000BASE-T SFP-based ports: RJ-45 connectors, f our-pair Category 5 UTP cabling
● 1000BASE-SX, -LX/LH, -ZX, and CWDM SFP-based ports: LC f iber connectors
(single/multimode f iber)
● Cisco Cataly st 3560 SFP Interconnect Cable: two-pair shielded cabling, 50 cm
● Management console port: RJ-45-to-DB-9 cable f or PC connections; f or terminal
connections, use RJ-45-to-DB-25 f emale data-terminal-equipment (DTE) adaptor (can
be ordered separately f rom Cisco; part number ACS-DSBUASY N=)
Power Connectors
● Customers can prov ide power to a switch by using either the internal power supply or
the Cisco RPS 2300. The connectors are located at the back of the switch.
Note: The Cisco Cataly st 3560-8PC and Cataly st 3560-12PC do not hav e an RPS port.
● Internal-Power-Supply Connector
● The internal power supply is an autoranging unit.
● The internal power supply supports input v oltages between 100 and 240 VAC.
● Use the supplied AC power cord to connect the AC power connector to an AC power
outlet.
● Cisco RPS Connector
● The connector of f ers connection f or an optional Cisco RPS 2300 that uses AC input
and supplies DC output to the switch.
● The connector supports up to six external network dev ices and prov ides power to two
f ailed dev ices at a time.
● The connector automatically senses when the internal power supply of a connected
dev ice f ails and prov ides power to the f ailed dev ice, prev enting loss of network traf f ic.
● Only the Cisco RPS 2300 (model PWR-RPS2300) should be attached to the
redundant-power-supply receptacle.
Indicators
● Per-port status LEDs: Link integrity , disabled, activ ity, speed, full-duplex indications,
PoE applied, PoE error, and PoE disabled indications
● Sy stem-status LEDs: Sy stem, RPS, link status, link duplex, link speed, and PoE
indications
Dimensions
(H x W x D)
● Cisco Cataly st 3560-8PC: 1.73 x 10.6 x 9.1 in. (4.4 x 27 x 23 cm)
● Cisco Cataly st 3560-12PC: 1.73 x 10.6 x 9.1 in. (4.4 x 27 x 23 cm)
● Cisco Cataly st 3560-24TS: 1.73 x 17.5 x 11.8 in. (4.4 x 44.5 x 30 cm)
● Cisco Cataly st 3560-48TS: 1.73 x 17.5 x 11.8 in. (4.4 x 44.5 x 30 cm)
● Cisco Cataly st 3560-24PS: 1.73 x 17.5 x 11.8 in. (4.4 x 44.5 x 30 cm)
● Cisco Cataly st 3560-48PS: 1.73 x 17.5 x 14.9 in. (4.4 x 44.5 x 37.8 cm)
● Cisco Cataly st 3560G-24TS: 1.73 x 17.5 x 14.9 in. (4.4 x 44.5 x 37.8 cm)
● Cisco Cataly st 3560G-48TS: 1.73 x 17.5 x 16.1 in. (4.4 x 44.5 x 40.9 cm)
● Cisco Cataly st 3560G-24PS: 1.73 x 17.5 x 14.9 in. (4.4 x 44.5 x 37.8 cm)
● Cisco Cataly st 3560G-48PS: 1.73 x 17.5 x 16.1 in. (4.4 x 44.5 x 40.9 cm)
Weight
● Cisco Cataly st 3560-8PC: 5 lb (2.3 kg)
● Cisco Cataly st 3560-12PC: 5 lb (2.3 kg)
● Cisco Cataly st 3560-24TS: 8.5 lb (3.9 kg)
● Cisco Cataly st 3560-48TS: 9.1 lb (4.1 kg)
● Cisco Cataly st 3560-24PS: 11.3 lb (5.1 kg)
● Cisco Cataly st 3560-48PS: 13.2 lb (6.0 kg)
● Cisco Cataly st 3560G-24TS: 12 lb (5.4 kg)
● Cisco Cataly st 3560G-24PS: 13.5 lb (6.1 kg)
● Cisco Cataly st 3560G-48TS: 14.0 lb (6.4 kg)
● Cisco Cataly st 3560G-48PS: 15.5 lb (7.0 kg)
Environmental Ranges
● Operating temperature: 32 to 113ºF (0 to 45ºC)
● Storage temperature: -13 to 158ºF (-25 to 70ºC)
● Operating relativ e humidity : 10 to 85% (noncondensing)
● Operating altitude: Up to 10,000 f t (3049m)
● Storage altitude: Up to 15,000 f t (4573m)
Acoustic Noise
● ISO 7779: By stander position operating to an ambient temperature of 25°C
● Cisco Cataly st 3560-8PC: 0 dBa (no f an)
● Cisco Cataly st 3560-12PC: 0 dBa (no f an)
● Cisco Cataly st 3560-24TS: 42 dBa
● Cisco Cataly st 3560-48TS: 42 dBa
● Cisco Cataly st 3560-24PS: 42 dBa
© 2009 Cisco Systems, Inc. All rights reserv ed. This document is Cisco Public Inf ormation.
Page 14 of 23
Data Sheet
● Cisco Cataly st 3560-48PS: 42 dBa
● Cisco Cataly st 3560G-24TS: 42 dBa
● Cisco Cataly st 3560G-48TS: 48 dBa
● Cisco Cataly st 3560G-24PS: 38-44 dBa
● Cisco Cataly st 3560G-48PS: 52-58 dBa
Mean Time Between Failure
(MTBF)
● Cisco Cataly st 3560-8PC: 367,586 hours
● Cisco Cataly st 3560-12PC: 406,470 hours
● Cisco Cataly st 3560-24TS: 326,100 hours
● Cisco Cataly st 3560-48TS: 280,900 hours
● Cisco Cataly st 3560-24PS: 224,100 hours
● Cisco Cataly st 3560-48PS: 173,500 hours
● Cisco Cataly st 3560G-24TS: 230,700 hours
● Cisco Cataly st 3560G-24PS: 186,300 hours
● Cisco Cataly st 3560G-48TS: 173,400 hours
● Cisco Cataly st 3560G-48PS: 147,000 hours
Table 3.
Pow er Specifications for Cisco Catalyst 3560 Series Sw itch
Description
Power Supply Rated
Maximum
Specification
● 204W (Cisco Cataly st 3560-8PC, Cataly st 3560-12PC)
● Dissipated power: 80W, 273 BTUs per hour
● PoE: 124W
● 45W (Cisco Cataly st 3560-24TS)
● 485W (Cisco Cataly st 3560-24PS)
● Dissipated power: 115W, 393 BTUs per hour
● PoE: 370W
● 65W (Cisco Cataly st 3560-48TS)
● 530W (Cisco Cataly st 3560-48PS)
● Dissipated power: 160W, 546 BTUs per hour
● PoE: 370W
● 100W (Cisco Cataly st 3560G-24TS)
● 540W (Cisco Cataly st 3560G-24PS)
● Dissipated power: 170W, 534 BTUs per hour
● PoE: 370W
● 160W (Cisco Cataly st 3560G-48TS)
● 590W (Cisco Cataly st 3560G-48PS)
● Dissipated power: 220W, 690 BTUs per hour
● PoE: 370W
Measured 100%
Throughput Power
Consumption
Measured 5%
Throughput Power
Consumption
Cisco Catalyst 3560 Series
Switch Power
Total Output BTU
3560-8PC
19W
64 BTU/hour
3560-12PC
22W
73 BTU/hour
3560-24TS
27W
89 BTU/hour
3560-48TS
45W
153 BTU/hour
3560-24PS
43W
144 BTU/hour
3560-48PS
86W
293 BTU/hour
3560G-24TS
74W
249 BTU/hour
3560G-24PS
96W
325 BTU/hour
3560G-48TS
124W
422 BTU/hour
3560G-48PS
130W
443 BTU/hour
Cisco Catalyst 3560 Series
Switch Power
Total Output BTU
3560-8PC
18W
60 BTU/hour
3560-12PC
20W
68 BTU/hour
3560-24TS
24W
82 BTU/hour
3560-48TS
41W
138 BTU/hour
3560-24PS
40W
134 BTU/hour
© 2009 Cisco Systems, Inc. All rights reserv ed. This document is Cisco Public Inf ormation.
Page 15 of 23
Data Sheet
3560-48PS
72W
245 BTU/hour
3560G-24TS
66W
225 BTU/hour
3560G-24PS
86W
293 BTU/hour
3560G-48TS
113W
386 BTU/hour
3560G-48PS
123W
418 BTU/hour
Measured 100%
Throughput Power
Consumption
Cisco Catalyst 3560 Series
Switch Power
PoE Power
Total Output BTU
3560-8PC
145W
124W
70 BTU/hour
(with maximum
possible PoE loads)
3560-12PC
145W
124W
72 BTU/hour
3560-24PS
449W
370W
267 BTU/hour
3560-48PS
483W
370W
383 BTU/hour
3560G-24PS
496W
370W
429 BTU/ hour
3560G-48PS
534W
370W
559 BTU/hour
Measured 5%
Throughput Power
Consumption
Cisco Catalyst 3560 Series
Switch Power
PoE Power
Total Output BTU
3560-8PC
82W
62W
69 BTU/hour
(with 50% PoE loads)
3560-12PC
86W
63W
76 BTU/hour
3560-24PS
247W
188W
197 BTU/hour
3560-48PS
275W
184W
311 BTU/hour
3560G-24PS
287W
186W
345 BTU/ hour
3560G-48PS
328W
189
474 BTU/hour
AC Input Voltage and
Current
● 100-240 VAC (autoranging), 2.5-1.3A, 50-60 Hz (Cisco Cataly st 3560-8PC)
● 100-240 VAC (autoranging), 2.5-1.3A, 50-60 Hz (Cisco Cataly st 3560-12PC)
● 100-240 VAC (autoranging), 450-190mA, 50-60 Hz (Cisco Cataly st 3560-24TS)
● 100-240 VAC (autoranging), 650-270mA, 50-60 Hz (Cisco Cataly st 3560-48TS)
● 100-240 VAC (autoranging), 5.5-2.8A, 50-60 Hz (Cisco Cataly st 3560-24PS and Cataly st
3560-48PS)
● 100-240 VAC (autoranging), 3.0-1.5A, 50-60Hz (Cisco Cataly st 3560G-24TS and Cataly st
3560G-48TS)
● 100-240 VAC (autoranging), 8.0-4.0A, 50-60Hz (Cisco Cataly st 3560G-24PS and Cataly st
3560G-48PS)
Power Rating
● Cisco Cataly st 3560-8PC: 0.2 kVA
● Cisco Cataly st 3560-12PC: 0.2 kVA
● Cisco Cataly st 3560-24TS: 0.075 kVA
● Cisco Cataly st 3560-48TS: 0.110 kVA
● Cisco Cataly st 3560-24PS: 0.485 kVA
● Cisco Cataly st 3560-48PS: 0.530 kVA
● Cisco Cataly st 3560G-24TS: 0.10 kVA
● Cisco Cataly st 3560G-48TS: 0.16 kVA
● Cisco Cataly st 3560G-24PS: 0.52 kVA
● Cisco Cataly st 3560G-48PS: 0.56 kVA
DC Input Voltages
(RPS Input)
● +12V at 5A (Cisco Cataly st 3560-24TS and Cataly st 3560-48TS); 7.5A (Cisco Cataly st 356024PS and Cataly st 3560-48PS); 10.5A (Cisco Cataly st 3560G-24TS); 17.5A (Cisco Cataly st
3560G-48TS); 14A (Cisco Cataly st 3560G-24PS and Cataly st 3560G-48PS)
● -48V at 7.8A (PoE switches)
PoE
● Maximum power supplied per port: 15.4W
● Total power dedicated to PoE: 370W
● Total power dedicated to PoE: 124W (Cisco Cataly st 3560-8PC, Cataly st 3560-12PC)
Note:
Disclaimer: All power consumption numbers were measured under controlled laboratory conditions
and are provided as an estimate.
The wattage rating on the power supply does not represent actual power draw. It indicates the
maximum power draw possible by the power supply. This rating can be used for facility capacity
© 2009 Cisco Systems, Inc. All rights reserv ed. This document is Cisco Public Inf ormation.
Page 16 of 23
Data Sheet
planning. For PoE switches, cooling requirements are smaller than the actual power consumption
as a significant portion of PoE loads are dissipated in the endpoints.
Non-PoE Power Consumption
100 Percent Throughput Switch Power Consumption
The numbers indicate the power consumed by a typical switch under normal conditions. Normal
conditions signify a temperature of 25 degrees Celsius, atmospheric pressure in the range of 860 to
1060 mbar, and relative humidity from 30 to 75 percent. Typically such power draws are only seen
when encountering a 100 percent traffic load made up entirely of 64 -byte packets on the switch and
the uplinks.
5 Percent Throughput Switch Power Consumption
The numbers indicate the power consumed by a typical switch under normal conditions. Normal
conditions signify a temperature of 25 degrees Celsius, atmospheric pressure in the range of 860 to
1060 mbar, and relative humidity from 30 to 75 percent. The numbers below indicate a 5 percent
traffic load on the switch and its uplinks.
PoE Power Consumption
100 Percent Throughput Switch Power Consumption (no PoE loads)
The numbers indicate the power consumed by a typical switch under normal conditions. Normal
conditions signify a temperature of 25 degrees Celsius, atmospheric pressure in the range of 860 to
1060 mbar, and relative humidity from 30 to 75 percent. Typically such power draws are only seen
when encountering a 100 percent traffic load made up entirely of 64 -byte packets with no PoE
loads on the switch and uplinks.
Measured 5 Percent Throughput Switch Power Consumption (no PoE loads)
The numbers indicate the power consumed by a typical switch und er normal conditions. Normal
conditions signify a temperature of 25 degrees Celsius, atmospheric pressure in the range of 860 to
1060 mbar and relative humidity from 30 to 75 percent. The numbers below indicate a 5 percent
traffic load on the switch and its uplinks
100 Percent Throughput Switch Power Consumption (with maximum PoE loads)
The numbers indicate the power consumed by a typical system (the switch and the corresponding
PoE loads) under normal conditions. Normal conditions signify a temperature of 25 degrees
Celsius, atmospheric pressure in the range of 860 to 1060 mbar and relative humidity from 30 to 75
percent. Typically this power draw is realized when a switch is running 100 percent traffic load of 64
byte sized packets on all its ports and uplinks and also drawing 100 percent PoE load .
5 Percent Throughput Switch Power Consumption (with 50 percent PoE loads).
The numbers indicate the power consumed by a typical system (the switch and the corresponding
PoE loads) under normal conditions. Normal conditions signify a temperature of 25 degrees
Celsius, atmospheric pressure in the range of 860 to 1060 mbar and relative humidity from 30 to 75
percent. The numbers below indicate a 5 percent traffic load and 50 percent PoE load on the switch
and its uplinks.
© 2009 Cisco Systems, Inc. All rights reserv ed. This document is Cisco Public Inf ormation.
Page 17 of 23
Data Sheet
Table 4.
Management and Standards Support for Cisco Catalyst 3560 Series Sw itch
Description
Specification
Management
Standards
● BRIDGE-MIB
● CISCO-VTP-MIB
● CISCO-CDP-MIB
● ENTITY -MIB
● CISCO-CLUSTER-MIB
● CISCO-CONFIG-MAN-MIB
● ETHERLIKE-MIB
● IF-MIB
● CISCO-ENTITY -FRU-CONTROL-MIB
● IGMP-MIB
● CISCO-ENVMON-MIB
● CISCO-FLASH-MIB
● IPMROUTE-MIB
● OLD-CISCO-CHASSIS-MIB
● CISCO-FTP-CLIENT-MIB
● OLD-CISCO-FLASH-MIB
● CISCO-HSRP-MIB
● CISCO-HSRP-EXT-MIB
● OLD-CISCO-INTERFACES-MIB
● OLD-CISCO-IP-MIB
● CISCO-IGMP-FILTER-MIB
● OLD-CISCO-SY S-MIB
● CISCO-IMAGE-MIB
● CISCO-IP-STAT-MIB
● OLD-CISCO-TCP-MIB
● OLD-CISCO-TS-MIB
● CISCO-L2L3-INTERFACE-CONFIG-MIB
● OSPF-MIB (RFC 1253)
● CISCO-MAC-NOTIFICATION-MIB
● CISCO-MEMORY -POOL-MIB
● PIM-MIB
● RFC1213-MIB
● CISCO-PAGP-MIB
● RFC1253-MIB
● CISCO-PING-MIB
● CISCO-PROCESS-MIB
● RMON-MIB
● RMON2-MIB
● CISCO-RTTMON-MIB
● SNMP-FRAMEWORK-MIB
● CISCO-STP-EXTENSIONS-MIB
● CISCO-SY SLOG-MIB
● SNMP-MPD-MIB
● SNMP-NOTIFICATION-MIB
● CISCO-TCP-MIB
● SNMP-TARGET-MIB
● CISCO-VLAN-IFTABLERELATIONSHIP-MIB
● SNMPv 2-MIB
● TCP-MIB
● CISCO-VLAN-MEMBERSHIP-MIB
● UDP-MIB
● IEEE 802.1s
● 1000BASE-X (SFP)
● IEEE 802.1w
● 1000BASE-SX
● IEEE 802.1x
● IEEE 802.3ad
● 1000BASE-LX/LH
● 1000BASE-ZX
● IEEE 802.3af
● 1000BASE-CWDM SFP 1470 nm
● IEEE 802.3x f ull duplex on 10BASE-T,
100BASE-TX, and 1000BASE-T ports
● 1000BASE-CWDM SFP 1490 nm
● 1000BASE-CWDM SFP 1510 nm
● IEEE 802.1D Spanning Tree Protocol
● IEEE 802.1p CoS Prioritization
● IEEE 802.1Q VLAN
● IEEE 802.3 10BASE-T specif ication
Table 5.
● 1000BASE-CWDM SFP 1530 nm
● 1000BASE-CWDM SFP 1550 nm
● 1000BASE-CWDM SFP 1570 nm
● 1000BASE-CWDM SFP 1590 nm
● IEEE 802.3u 100BASE-TX specif ication
● IEEE 802.3ab 1000BASE-T specif ication
● 1000BASE-CWDM SFP 1610 nm
● RMON I and II standards
● IEEE 802.3z 1000BASE-X specif ication
● SNMPv 1, SNMPv 2c, and SNMPv 3
Safety and Compliance
Description
Safety Certifications
Specification
● UL 60950-1, First Edition
● CUL to CAN/CSA 22.2 No. 60950-1, First Edition
● TUV/GS to EN 60950-1, First Edition
● CB to IEC 60950-1 with all country dev iations
● AS/NZS 60950-1, First Edition
● NOM (through partners and distributors)
● CE Marking
Electromagnetic Emissions
Certifications
● FCC Part 15 Class A
● EN 55022 Class A (CISPR22)
● EN 55024 (CISPR24)
● AS/NZS CISPR22 Class A
● CE
● CNS 13438 Class A
© 2009 Cisco Systems, Inc. All rights reserv ed. This document is Cisco Public Inf ormation.
Page 18 of 23
Data Sheet
● MIC
● GOST
● China EMC Certif ications
Telco
Common Language Equipment Identif ier (CLEI) code
Warranty
Limited lif etime warranty
Cisco Services for Access Switching
Cisco and our partners can help you create a robust, dependable Cisco Access Switching solution.
The Cisco lifecycle approach to services defines the requisite activities at each phase of the
solution lifecycle. Assessments help align your solution to busine ss goals and gauge readiness to
support new technology. Effective planning and design expedite solution adoption. Award -winning
technical support increases operational efficiency, and optimization improves performance,
resiliency, stability, and predictability and prepares your network and teams for change. For more
information, visit http://www.cisco.com/go/services.
Table 6.
Cisco Services and Support Programs
Service and Support
Features
Benefits
Advanced Services
● Cisco Total Implementation
Solutions (TIS), av ailable direct f rom
Cisco
● Project management
● Supplements existing staf f
● Cisco Packaged TIS, av ailable
through resellers
● Cisco SMARTnet ® and SMARTnet
Onsite support, av ailable direct f rom
Cisco
● Cisco Packaged SMARTnet support
program, av ailable through resellers
● Site surv ey , configuration, and
deploy ment
● Helps ensure that f unctions meet
needs
● Installation, text, and cutov er
● Mitigates risk
● Training
● Major mov es, adds, and changes
● Helps enable proactiv e or expedited
issue resolution
● Design rev iew and product staging
● Lowers TCO by taking adv antage of
Cisco expertise and knowledge
● Minimizes network downtime
● Access to sof tware updates 24
hours
● Web access to technical repositories
● Telephone support through the
Cisco Technical Assistance Center
(TAC)
● Adv ance Replacement of hardware
parts
Ordering Information
Table 7 gives ordering information for the Cisco Catalyst 3560 Series switches.
Table 7.
Ordering Information for Cisco Catalyst 3560 Series Sw itches
Part Numbers
WS-C3560-8PC-S
Description
● 8 Ethernet 10/100 ports and 1 dual-purpose 10/100/1000 and SFP port
● Compact f orm-f actor with no f an
● Enterprise-class intelligent serv ices deliv ered to the network edge
● IEEE 802.3af and Cisco prestandard Power ov er Ethernet
● IP Base sof tware f eature set (IPB)
WS-C3560-12PC-S
● 12 Ethernet 10/100 ports and 1 dual-purpose 10/100/1000 and SFP port
● Compact f orm-f actor with no f an
● Enterprise-class intelligent serv ices deliv ered to the network edge
● IEEE 802.3af and Cisco prestandard Power ov er Ethernet
● IP Base sof tware f eature set (IPB)
WS-C3560-24TS-S
● 24 Ethernet 10/100 ports and 2 SFP-based Gigabit Ethernet ports
● 1RU f ixed-conf iguration, multilay er switch
● Enterprise-class intelligent serv ices deliv ered to the network edge
● IP Base sof tware f eature set (IPB)
WS-C3560-24TS-E
● 24 Ethernet 10/100 ports and 2 SFP-based Gigabit Ethernet ports
● RU f ixed-conf iguration, multilay er switch
© 2009 Cisco Systems, Inc. All rights reserv ed. This document is Cisco Public Inf ormation.
Page 19 of 23
Data Sheet
● Enterprise-class intelligent serv ices deliv ered to the network edge
● IP Serv ices sof tware f eature set (IPS)
● Prov ides f ull IPv 6 dy namic routing
WS-C3560-48TS-S
● 48 Ethernet 10/100 ports and 4 SFP-based Gigabit Ethernet ports
● 1RU f ixed-conf iguration, multilay er switch
● Enterprise-class intelligent serv ices deliv ered to the network edge
● IP Base sof tware f eature set (IPB)
WS-C3560-48TS-E
● 48 Ethernet 10/100 ports and 4 SFP-based Gigabit Ethernet ports
● 1RU f ixed-conf iguration, multilay er switch
● Enterprise-class intelligent serv ices deliv ered to the network edge
● IP Serv ices sof tware f eature set (IPS)
● Prov ides f ull IPv 6 dy namic routing
WS-C3560-24PS-S
● 24 Ethernet 10/100 ports and 2 SFP-based Gigabit Ethernet ports
● 1RU f ixed-conf iguration, multilay er switch
● Enterprise-class intelligent serv ices deliv ered to the network edge
● IEEE 802.3af and Cisco prestandard Power ov er Ethernet
● IP Base sof tware f eature set (IPB)
WS-C3560-24PS-E
● 24 Ethernet 10/100 ports and 2 SFP-based Gigabit Ethernet ports
● 1RU f ixed-conf iguration, multilay er switch
● Enterprise-class intelligent serv ices deliv ered to the network edge
● IEEE 802.3af and Cisco prestandard Power ov er Ethernet
● IP Serv ices sof tware f eature set (IPS)
● Prov ides f ull IPv 6 dy namic routing
WS-C3560-48PS-S
● 48 Ethernet 10/100 ports and 4 SFP-based Gigabit Ethernet ports
● 1RU f ixed-conf iguration, multilay er switch
● Enterprise-class intelligent serv ices deliv ered to the network edge
● IEEE 802.3af and Cisco prestandard Power ov er Ethernet
● IP Base sof tware f eature set (IPB)
WS-C3560-48PS-E
● 48 Ethernet 10/100 ports and 4 SFP-based Gigabit Ethernet ports
● 1RU f ixed-conf iguration, multilay er switch
● Enterprise-class intelligent serv ices deliv ered to the network edge
● IEEE 802.3af and Cisco prestandard Power ov er Ethernet
● IP Serv ices sof tware f eature set (IPS)
● Prov ides f ull IPv 6 dy namic routing
WS-C3560G-24TS-S
● 24 Ethernet 10/100/1000 ports and 4 SFP-based Gigabit Ethernet ports
● 1RU f ixed-conf iguration, multilay er switch
● Enterprise-class intelligent serv ices deliv ered to the network edge
● IP Base sof tware f eature set (IPB)
WS-C3560G-24TS-E
● 24 Ethernet 10/100/1000 ports and 4 SFP-based Gigabit Ethernet ports
● 1RU f ixed-conf iguration, multilay er switch
● Enterprise-class intelligent serv ices deliv ered to the network edge
● IP Serv ices sof tware f eature set (IPS)
● Prov ides f ull IPv 6 dy namic routing
WS-C3560G-48TS-S
● 48 Ethernet 10/100/1000 ports and 4 SFP-based Gigabit Ethernet ports
● 1RU f ixed-conf iguration, multilay er switch
● Enterprise-class intelligent serv ices deliv ered to the network edge
● IP Base sof tware f eature set (IPB)
WS-C3560G-48TS-E
● 48 Ethernet 10/100/1000 ports and 4 SFP-based Gigabit Ethernet ports
● 1RU f ixed-conf iguration, multilay er switch
● Enterprise-class intelligent serv ices deliv ered to the network edge
● IP Serv ices sof tware f eature set (IPS)
● Prov ides f ull IPv 6 dy namic routing
WS-C3560G-24PS-S
● 24 Ethernet 10/100/1000 ports and 4 SFP-based Gigabit Ethernet ports
● 1RU f ixed-conf iguration, multilay er switch
● Enterprise-class intelligent serv ices deliv ered to the network edge
● IEEE 802.3af and Cisco prestandard
● IP Base sof tware f eature set (IPB)
© 2009 Cisco Systems, Inc. All rights reserv ed. This document is Cisco Public Inf ormation.
Page 20 of 23
Data Sheet
WS-C3560G-24PS-E
● 24 Ethernet 10/100/1000 ports and 4 SFP-based Gigabit Ethernet ports
● 1RU f ixed-conf iguration, multilay er switch
● Enterprise-class intelligent serv ices deliv ered to the network edge
● IEEE 802.3af and Cisco prestandard Power ov er Ethernet
● IP Serv ices sof tware f eature set (IPS)
● Prov ides f ull IPv 6 dy namic routing
WS-C3560G-48PS-S
● 48 Ethernet 10/100/1000 ports and 4 SFP-based Gigabit Ethernet ports
● 1RU f ixed-conf iguration, multilay er switch
● Enterprise-class intelligent serv ices deliv ered to the network edge
● IEEE 802.3af and Cisco prestandard Power ov er Ethernet
● IP Base sof tware f eature set (IPB)
WS-C3560G-48PS-E
● 48 Ethernet 10/100/1000 ports and 4 SFP-based Gigabit Ethernet ports
● 1RU f ixed-conf iguration, multilay er switch
● Enterprise-class intelligent serv ices deliv ered to the network edge
● IEEE 802.3af and Cisco prestandard Power ov er Ethernet
● IP Serv ices sof tware f eature set (IPS)
● Prov ides f ull IPv 6 dy namic routing
CD-3560G-EMI=
● IP Serv ices License (f ormerly EMI) upgrade kit f or IP Base v ersions of the Cisco
Cataly st 3560G-24TS, Cataly st 3560G-24PS, Cataly st 3560G-48TS and Cataly st
3560G-48PS
● Adv anced IPv 6 routing
CD-3560-EMI=
● IP Serv ices License (f ormerly EMI) upgrade kit f or IP Base v ersions of the Cisco
Cataly st 3560-24PS, Cataly st 3560-48PS, Cataly st 3560-24TS, Cataly st 3560-48TS,
and Cataly st 3560-8PC
● Adv anced IPv 6 routing
PWR-RPS2300
Cisco RPS 2300 with one connector cable
RCKMNT-1RU=
Spare rack-mount kit f or the Cisco Cataly st 3560
RCKMNT-REC-1RU=
1RU recessed rack-mount kit f or the Cisco Cataly st 3560
RCKMNT-19-CMPCT=
Rack-mount kit f or the Cisco Cataly st 3560-8PC and Cataly st 3560-12PC compact
switches
CBLGRD-C3560-8PC=
Cable guard f or the Cisco Cataly st 3560-8PC compact switch
CBLGRD-C3560-12PC=
Cable guard f or the Cisco Cataly st 3560-12PC compact switch
GLC-LH-SM=
1000BASE-LX/LH SFP transceiv er module f or MMF and SMF, 1300-nm wav elength
GLC-SX-MM=
1000BASE-SX SFP transceiv er module f or MMF, 850-nm wav elength
GLC-ZX-SM=
1000BASE-ZX SFP transceiv er module f or SMF, 1550-nm wav elength
GLC-T=
1000BASE-T SFP transceiv er module f or Category 5 copper wire
Not supported on the Cisco Cataly st 3560-8PC compact switch
GLC-BX-D=
1000BASE-BX10 SFP transceiv er module f or single strand SMF, 1490-nm TX / 1310-nm
RX wav elength
GLC-BX-U=
1000BASE-BX10 SFP transceiv er module f or single strand SMF, 1310-nm TX / 1490-nm
RX wav elength
GLC-GE-100FX=
● 100BASE-FX SFP transceiv er module f or Gigabit Ethernet ports, 1310 nm wav elength,
2 km ov er MMF
● Not supported on the Cisco Cataly st 3560-8PC and Cataly st 3560-12PC compact
switches
GLC-FE-100FX=
● 100BASE-FX SFP transceiv er module f or 100-Mb ports, 1310 nm wav elength, 2 km
ov er MMF
● Only supported on the Cisco Cataly st 3560-8PC and Cataly st 3560-12PC compact
switches
GLC-FE-100LX=
● 100BASE-FX SFP transceiv er module f or 100-Mb ports, 1310 nm wav elength, 10 km
ov er SMF
● Only supported on the Cisco Cataly st 3560-8PC and Cataly st 3560-12PC compact
switches
GLC-FE-100BX-D=
● 100BASE-BX10-D SFP transceiv er module f or 100-Mb ports, 1550 nm TX /1310 nm
RX wav elength, 10 km ov er single-strand SMF
● Only supported on the Cisco Cataly st 3560-8PC and Cataly st 3560-12PC compact
switches
© 2009 Cisco Systems, Inc. All rights reserv ed. This document is Cisco Public Inf ormation.
Page 21 of 23
Data Sheet
● 100BASE-BX10-U SFP transceiv er module f or 100-Mb ports, 1310 nm TX/1550 nm RX
wav elength, 10 km ov er single-strand SMF
GLC-FE-100BX-U=
● Only supported on the Cisco Cataly st 3560-8PC and Cataly st 3560-12PC compact
switches
CWDM-SFP-1470=
Cisco CWDM SFP 1470 nm; Gigabit Ethernet and 1G/2G FC (gray )
CWDM-SFP-1490=
Cisco CWDM SFP, 1490 nm; Gigabit Ethernet and 1G/2G FC (v iolet)
CWDM-SFP-1510=
Cisco CWDM SFP, 1510 nm; Gigabit Ethernet and 1G/2G FC (blue)
CWDM-SFP-1530=
Cisco CWDM SFP, 1530 nm; Gigabit Ethernet and 1G/2G FC (green)
CWDM-SFP-1550=
Cisco CWDM SFP, 1550 nm; Gigabit Ethernet and 1G/2G FC (y ellow)
CWDM-SFP-1570=
Cisco CWDM SFP, 1570 nm; Gigabit Ethernet and 1G/2G FC (orange)
CWDM-SFP-1590=
Cisco CWDM SFP, 1590 nm; Gigabit Ethernet and 1G/2G FC (red)
DWDM-SFP-3033=
DWDM SFP 1530.33 nm SFP (100 GHz ITU grid)
DWDM-SFP-3112=
DWDM SFP 1531.12 nm SFP (100 GHz ITU grid)
DWDM-SFP-3190=
DWDM SFP 1531.90 nm SFP (100 GHz ITU grid)
DWDM-SFP-3268=
DWDM SFP 1532.68 nm SFP (100 GHz ITU grid)
DWDM-SFP-3425=
DWDM SFP 1534.25 nm SFP (100 GHz ITU grid)
DWDM-SFP-3504=
DWDM SFP 1535.04 nm SFP (100 GHz ITU grid)
DWDM-SFP-3582=
DWDM SFP 1535.82 nm SFP (100 GHz ITU grid)
DWDM-SFP-3661=
DWDM SFP 1536.61 nm SFP (100 GHz ITU grid)
DWDM-SFP-3819=
DWDM SFP 1538.19 nm SFP (100 GHz ITU grid)
DWDM-SFP-3898=
DWDM SFP 1538.98 nm SFP (100 GHz ITU grid)
DWDM-SFP-3977=
DWDM SFP 1539.77 nm SFP (100 GHz ITU grid)
DWDM-SFP-4056=
DWDM SFP 1540.56 nm SFP (100 GHz ITU grid)
DWDM-SFP-4214=
DWDM SFP 1542.14 nm SFP (100 GHz ITU grid)
DWDM-SFP-4294=
DWDM SFP 1542.94 nm SFP (100 GHz ITU grid)
DWDM-SFP-4373=
DWDM SFP 1543.73 nm SFP (100 GHz ITU grid)
DWDM-SFP-4453=
DWDM SFP 1544.53 nm SFP (100 GHz ITU grid)
CWDM-SFP-1610=
Cisco CWDM SFP, 1610 nm; Gigabit Ethernet and 1G/2G FC (brown)
CAB-SFP-50CM=
Cisco Cataly st 3560 SFP Interconnect Cable (50 dcm)
CAB-SM-LCSC-1M
1m-f iber single-mode LC-to-SC connectors
CAB-SM-LCSC-5M
5m-f iber single-mode LC-to-SC connectors
For more information about Cisco products, contact:
●
United States and Canada: (toll free) 800 553-NETS (6387)
●
Europe: 32 2 778 4242
●
Australia: 612 9935 4107
●
Other: 408 526-7209
World Wide Web URL: http://www.cisco.com
© 2009 Cisco Systems, Inc. All rights reserv ed. This document is Cisco Public Inf ormation.
Page 22 of 23
Data Sheet
Printed in USA
© 2009 Cisco Systems, Inc. All rights reserv ed. This document is Cisco Public Inf ormation.
C78-379068-08
08/09
Page 23 of 23