AcuRite 02038 Instruction manual

Instruction Manual
Weather Station
model 02038 / 02041
CONTENTS
Unpacking Instructions............ 2
Package Contents................... 2
Product Registration................ 2
Features & Benefits: Sensor...... 2
Features & Benefits: Display..... 3
Setup..................................... 5
Sensor Setup.......................... 5
Display Setup......................... 6
Intelli-Time® Clock................... 7
Set the Time, Date & Units....... 7
Backlight Settings.................... 7
Placement Guidelines.............. 8
Using the Weather Station....... 9
Troubleshooting.....................10
Care & Maintenance..............12
Calibration............................12
Replace Intelli-Time® battery...13
Specifications.........................14
FCC Information....................14
Customer Support..................15
Warranty..............................15
Questions? Contact Customer Support at
(877) 221-1252 or visit www.AcuRite.com.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
Congratulations on your new AcuRite product. To ensure the best
possible product performance, please read this manual in its entirety
and retain it for future reference.
Unpacking Instructions
Remove the protective film that is applied to the LCD screen prior to using this
product. Locate the tab and peel off to remove.
Package Contents
1. Display unit
2. Outdoor sensor
3. Power adapter
4. Instruction Manual
IMPORTANT
PRODUCT MUST BE REGISTERED
TO RECEIVE WARRANTY SERVICE
PRODUCT REGISTRATION
Register online
to receive 1 year
warranty protection
www.AcuRite.com
Features & Benefits
OUTDOOR SENSOR
1
1. Integrated Hanger
2
For easy placement.
5
3
►Register a Product
2. Wireless Signal Indicator
Flashes when data is being sent to the
display unit.
3. Battery Compartment
4. A-B-C Switch
ID code that must match display’s A-B-C
switch to ensure units synchronize.
4
5. Battery Compartment Cover
2
Features & Benefits
21
22
20
19 18
17 16
1
15
2
14
3
13
4
12
11
10
5
6 7
8
DISPLAY UNIT
9
10.Low/High Humidity Records
1. Outdoor Sensor Signal Strength
2. Current Outdoor Temperature
Lowest and highest indoor
humidity recorded since midnight.
Arrow icon indicates the direction the
temperature is trending.
11. Humidity Level Indicator
Lowest and highest outdoor
temperature recorded since midnight.
12.Current Indoor Humidity
Arrow icon indicates the direction
the humidity is trending.
13.Low/High Temperature Records
Lowest and highest outdoor humidity
recorded since midnight.
14. Current Indoor Temperature
Indicates a high, low or ideal indoor
humidity level.
3. Low/High Temperature Records
Arrow icon indicates the direction
the humidity is trending.
4. Current Outdoor Humidity
Lowest and highest indoor
temperature recorded since midnight.
5. Low/High Humidity Records
Arrow icon indicates the direction the
temperature is trending.
6. Learning Mode Icon
isappears after weather forecast
D
self-calibration is complete.
Auto Pressure Mode
15.Date
16.SET Icon
17. Display Low Battery Indicator
18.Intelli-Time® Clock
Manual Pressure Mode
19.12 to 24 Hour Weather Forecast
7. Auto or Manual Pressure Mode
Indicates pressure mode preference.
Pressure will self-calibrate over a 14
day Learning Mode.
Automatically updates itself for
Daylight Saving Time.
Indicates raw pressure value, no
adjustment for sea level (can be
calibrated).
Self-Calibrating Forecasting pulls data
from the outdoor sensor to generate
your personal forecast.
8. Moon Phase
9. Barometric Pressure
20.AUTO DIM Indicator
21. Sensor Low Battery Indicator
22.Momentary Backlight Button
Arrow icon indicates the direction
the pressure is trending.
3
Features & Benefits
10
1
2
9
3
8
4
5
6
7
BACK OF DISPLAY UNIT
5. Battery Compartment
6. Reset Button
1. All-Time Records Button
Press to access all-time high
and low records.
Full reset to factory defaults.
7. Battery Compartment Cover
2.“
“ Button
8. Plug-in for Power Adapter
3.“
“ Button
9. A-B-C Switch
ID code that must match sensor’s A-B-C
For setup preferences.
For setup preferences.
4.“
switch to ensure units synchronize.
“ Button
10.Integrated Hang Hole
For setup preferences.
4
For easy wall mounting.
SETUP
Sensor Setup
1 Set the A-B-C Switch
conditions. Cold temperatures
can cause alkaline batteries
to function improperly. Use
lithium batteries in the sensor for
temperatures below -4ºF / -20ºC.
The A-B-C switch is located inside
the battery compartment. It can
be set to A, B or C. However,
you must select the same letter
choices for both the sensor and
the display unit in order for the
units to synchronize.
1. S
lide off the battery
compartment cover. Take
note of the A-B-C switch
setting inside the battery
compartment for display unit
setup.
2 Install or Replace Batteries
AcuRite recommends high quality
alkaline or lithium batteries in
the outdoor sensor for the best
product performance. Heavy
duty or rechargeable batteries
are not recommended.
2. Insert 2 x AA batteries into
the battery compartment, as
shown. F
ollow the polarity
(+/-) diagram in the battery
compartment.
The sensor requires lithium
batteries in low temperature
3. R
eplace the battery cover.
1
A-B-C Switch
set to match
display unit
ABC
2
Install Batteries
2 AA batteries
5
Display Unit Setup
1 Set the A-B-C Switch
compartment cover.
L ocate the A-B-C switch inside
the battery compartment. Set
the A-B-C switch to A, B or C.
You must select the same letter
choices for both the display unit
and the sensor in order for the
units to synchronize.
2. Insert 3 x AA alkaline batteries
into the battery compartment,
as shown. Follow the polarity
(+/–) diagram in the battery
compartment.
3. Replace the battery cover.
3 Plug in Power Adapter
2 Install or Replace Backup
Batteries (optional)
For the best performance, plug
in the power adapter as the main
power source for this product.
1. R
emove the battery
1
A
B
C
A-B-C Switch
set to match
sensor
3
Plug in Power Adapter
2
Install Batteries
3 AA batteries
IMPORTANT: Batteries
are a backup power
source to preserve records
in the event of a power
outage. Power adapter
is recommended as the
primary power source to
enjoy the full functionality
of this product.
PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE
WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.
BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to be
used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of used
batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in fire,
as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT recharge
non-rechargeable batteries. DO NOT short-circuit the supply terminals.
6
Intelli-Time® Clock
Intelli-Time products are pre-programmed with the correct time and date.
Intelli-Time technology instructs the time and date to set themselves. All you
need to do is select your Time Zone and Daylight Saving Time preferences. The
clock will then automatically set itself and change for Daylight Saving Time.
Set the Time, Date & Units
Press the “
” button, located on the back of the display unit, to enter SET
MODE. Once in set mode, the preference you are currently setting will blink on
the display.
To adjust the currently selected (flashing) item, press and release the “
“ “ buttons (press and HOLD to fast adjust).
“ or
To save your adjustments, press and release the “
” button again to adjust
the next preference. The preference set order is as follows:
TIME ZONE ( PST MST CST EST AST HAST AKST)
DST (Daylight Saving Time ON or OFF)*
CLOCK HOUR
CLOCK MINUTE
CALENDAR MONTH
CALENDAR DATE
CALENDAR YEAR
TEMPERATURE UNITS (ºF or ºC)
PRESSURE UNITS (inHg or hPa)
*If you live in an area that observes DST, DST should be set to ON, even if it is
not currently Daylight Saving Time.
You will automatically exit SET MODE if no buttons are pressed for 10 seconds.
” button.
Enter setup mode at any time by pressing the “
Display Backlight Settings
This weather station’s color display features three different lighting settings:
High (100%) brightness, Medium (60%) brightness and Low (30%) brightness
Using battery power alone, the backlight is available momentarily for 10
seconds by pressing the “BACKLIGHT” button.
When display is powered with the power adapter, backlight remains on at
100% brightness. Press “BACKLIGHT” button once to dim to 60% brightness;
press again to dim to 30%, press a 3rd time to enter “AUTO DIM” mode.
“AUTO DIM” will appear to the left of the time.
AUTO DIM MODE: Automatically adjusts display brightness based on time of day & year.
MARCH 11- NOVEMBER 4
6:00 a.m. - 9:00 p.m. = 100% brightness
9:01 p.m. - 5:59 a.m.= 30% brightness
NOVEMBER 5 - MARCH 10 7:30 a.m. - 7:00 p.m.= 100% brightness
7:01 p.m. - 7:29 a.m. = 30% brightness
7
Placement for Maximum Accuracy
AcuRite sensors are sensitive to surrounding environmental conditions. Proper
placement of both the display unit and outdoor sensor are critical to the
accuracy and performance of this product.
Display Unit Placement
Place the display unit in a dry area free of dirt and dust. Display
unit stands upright for tabletop use or is wall-mountable.
Outdoor Sensor Placement
Sensor must be placed outside to observe outdoor conditions.
Sensor is water resistant and is designed for general outdoor
use, however, to extend its life place the sensor in an area
protected from direct weather elements.
Hang the sensor using the integrated hang holes or hanger, or
by using string (not included) to hang it from a suitable location,
like a well covered tree branch. The best location is 4 to 8 feet
above the ground with permanent shade and plenty of fresh air
to circulate around the sensor.
Important Placement Guidelines
•To ensure accurate temperature measurement, place units out of direct sunlight and away from any heat sources or vents.
•Display unit and outdoor sensor must be within 330 ft (100 m) of each other.
•To maximize wireless range, place units away from large metallic items, thick walls, metal surfaces, or other objects that may limit wireless communication.
•To prevent wireless interference, place both units at least 3 ft (.9 m) away from electronic devices (TV, computer, microwave, radio, etc.).
TV
AT
LEAST
3
(.91 m)
APART
(330 feet maximum)
(100 meters)
Setup is Complete
The sensor will now synchronize with the display unit. It may take a few
minutes for synchronization to complete. Please refer to the troubleshooting
section of this manual if anything appears to be functioning improperly.
8
OPERATION
Using the Weather Station
Learning Mode
Self-Calibrating Forecasting uses a unique algorithm to analyze changes in
pressure over a time period (called Learning Mode) to determine your altitude.
After 14 days, the Learning Mode icon disappears from the display screen. At
this point, the self-calibrated pressure is tuned in to your location and the unit is
ready for superior weather prediction.
Weather Forecast
AcuRite’s patented Self-Calibrating Forecasting provides your personal forecast
of weather conditions for the next 12 to 24 hours by collecting data from
the sensor in your backyard. It generates a forecast with pinpoint accuracy personalized for your exact location.
RAIN/SNOW
MIX LIKELY
SNOW
LIKELY
LIGHT RAIN
LIKELY
CLOUDY
PARTLY
CLOUDY
SUNNY
(windy)
(Lightning=Stormy)
View the complete list of icons at www.AcuRite.com/acurite-icons
Barometric Pressure
Subtle variations in barometric pressure greatly affect the weather. This
weather station displays the current pressure with an arrow icon to indicate the
direction the pressure is trending (FALLING, STEADY, or RISING).
Moon Phase
Track the phases of the moon, conveyed through simple lunar phase icons:
NEW
WAXING
CRESCENT
FULL
1ST
QUARTER
3RD
QUARTER
WANING
CRESCENT
High & Low Records
Today’s high and low records are displayed for indoor and outdoor
temperature and humidity. Today’s records automatically clear at 12:00am
midnight every day.
To manually clear all of today’s LOW recorded values, press and hold the
“ ” button for 2 seconds. Dashes display to confirm you have cleared the
9
LOW records.
To manually clear all of today’s HIGH recorded values, press and hold the
“ ” button for 2 seconds. Dashes display to confirm you have cleared the
HIGH records.
Press the “ ” button to cycle through the all-time high and low recorded
values (one record is shown at a time) for outdoor and indoor temperature and
humidity. Located in the top right corner of the screen, a date and time stamp
are shown for when each value was recorded. You will automatically exit
all-time records if no buttons are pressed for 5 seconds.
To manually clear an all-time LOW record, press and hold the “ ” button
for 2 seconds while viewing the record you wish to clear. Dashes display to
confirm you have cleared the record.
To manually clear an all-time HIGH record, press and hold the “ ” button
for 2 seconds while viewing the record you wish to clear. Dashes display to
confirm you have cleared the record.
Troubleshooting
No outdoor sensor
reception
no bars
If the wireless signal indicator shows no bars:
•R
elocate the display unit and/or the outdoor sensor.
The units must be within 330 ft (100 m) of each other.
•M
ake sure both units are placed at least 3 feet (.9m)
away from electronics that may interfere with the
wireless communication (such as TVs, microwaves,
computers, etc).
•U
se standard alkaline batteries (or lithium batteries in
sensor when temperature is below -4ºF/-20ºC). Do not
use heavy duty or rechargeable batteries. NOTE: It
may take up to 20 minutes for display unit and sensor
to synchronize after batteries are replaced.
Display screen
not working
•C
heck that the batteries are installed correctly.
Batteries may need to be replaced.
•R
eset display by pressing the RESET button, located
on the back of the display unit. Date and time will
need to be entered after a reset.
Outdoor
t emperature
is flashing or
showing dashes
Flashing of the outdoor temperature is generally an
indication of wireless interference.
1. B
ring both the sensor and display unit indoors and
remove at least one battery from each.
2. Make sure the A-B-C switch on both units match.
3. Reinstall the battery in the outdoor sensor.
4. Reinstall the battery in the display unit.
5. L et the units sit within a couple feet of each other
for about 20 minutes to gain a strong connection.
10
Inaccurate forecast
•W
eather Forecast icon predicts conditions for the next
12 to 24 hours, not current conditions.
•H
as Learning Mode icon disappeared from the
display unit? Learning Mode must complete before
forecast and pressure will be accurate.
•A
llow unit to run continuously for 33 days. Battery
removal or resetting the display unit will restart
Learning Mode. After 14 days, forecast should be
fairly accurate, however Learning Mode calibrates for
a total of 33 days.
Inaccurate
temperature
or humidity
•M
ake sure both the display unit and sensor are
placed out of direct sunlight and away from any heat
sources or vents (see page 8).
•M
ake sure both units are positioned away from
moisture sources (see page 8).
The unit lost power
or batteries were
changed and the
time is not correct
• The
Intelli-Time battery needs to be replaced
(see page 13). Once the new battery is installed,
time and date will need to be set manually.
If your AcuRite product does not operate properly after trying
the troubleshooting steps, visit www.AcuRite.com or call
(877) 221-1252 for assistance.
11
Care & Maintenance
Display Unit Care
Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep
away from dust, dirt and moisture. Clean ventilation ports regularly with a
gentle puff of air.
Outdoor Sensor Care
Clean with a soft damp cloth. Do not use caustic cleaners or abrasives.
Calibration
The indoor / outdoor temperature and humidity readings, and barometric
pressure can be calibrated on the display unit to improve accuracy. Calibration
can improve accuracy when sensor placement or environmental factors impact
the data accuracy.
1. To access calibration mode, press AND HOLD the “
buttons simultaneously for at least 5 seconds.
”, “
”, and “
”
2. To adjust the currently selected (flashing) item, press and release the “
“
or “ “ buttons to calibrate the data value higher or lower from the actual
reading.
3. To save your adjustments, press and release the “
” button to adjust the
next preference. The “ ” icon will remain illuminated next to calibrated
values.
The preference set order is as follows:
OUTDOOR TEMPERATURE
OUTDOOR HUMIDITY
INDOOR TEMPERATURE
INDOOR HUMIDITY
BAROMETRIC PRESSURE (must be set to MANUAL mode to calibrate)*
*To change from AUTO to MANUAL pressure mode and vice versa, press
AND HOLD the “ ” button for at least 10 seconds. The display indicates
the current pressure mode selected,“AUTO” or “MANUAL”.
After 20 seconds of inactivity, the display will save the adjustments and exit
calibration mode. Note: Calibrations will be erased if the display is reset or if
batteries are removed and the power adapter is unplugged.
12
Replace Intelli-Time Battery
Intelli-Time technology is
powered by a pre-installed
coin-cell battery that stores
the time and date settings.
The battery has a shelf life of
several years. To replace the
Intelli-Time battery:
CR2032
3V
1. Locate the coin cell battery
compartment door on the
back of the display unit.
Unscrew and remove the
compartment cover.
2. Insert 1 x CR2032 coin
cell battery into the battery
compartment, as shown. Install battery with “+” positive terminal facing
OUT.
3. Screw in the battery cover.
13
Specifications
TEMPERATURE RANGE
Outdoor: -40ºF to 158ºF; -40ºC to 70ºC
Indoor: 32ºF to 122ºF; 0ºC to 50ºC
HUMIDITY RANGE
Outdoor: 1% - 99% RH (relative humidity)
Indoor: 16% - 98% RH
WIRELESS RANGE
330 ft / 100 m depending on home construction materials
OPERATING FREQUENCY 433 MHz
POWER
Display: 5v power adapter
3 x AA alkaline batteries (optional)
Sensor: 2 x AA alkaline or lithium batteries
DATA REPORTING
Outdoor Data: 16 second updates
Indoor Data: 60 second updates
FCC Information
This device complies with part 15 of FCC rules. Operation is subject to the following two conditions:
1- This device may NOT cause harmful interference, and
2- This device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment.
Such modifications could void the user authority to operate the equipment.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation of the device.
14
Customer Support
AcuRite customer support is committed to providing you with best-inclass service. For assistance, please have the model number of this
product available and contact us in any of the following ways:
(877) 221-1252
info@chaney-inst.com
24/7 support at www.AcuRite.com
► Installation
Videos
► Register
your Product
► Instruction
Manuals
► Support
User Forum
► Replacement
Parts
► Submit
IMPORTANT
Feedback & Ideas
PRODUCT MUST BE REGISTERED
TO RECEIVE WARRANTY SERVICE
PRODUCT REGISTRATION
Register online
to receive 1 year
warranty protection
www.AcuRite.com
Limited One Year Warranty
►Register a Product
At AcuRite, we proudly uphold our commitment
to quality technology. Chaney Instrument Co.
warrants that all products it manufactures to
be of good material and workmanship, and to
be free of defects when properly installed and
operated for a period of one year from the date
of purchase.
warranty will not be breached, and Chaney will give no credit
for products it manufactures which have received normal wear
and tear, been damaged (including by acts of nature), tampered,
abused, improperly installed, damaged in shipping, or repaired
or altered by others than authorized representatives of Chaney.
The above-described warranty is expressly in lieu of all other
warranties, express or implied, and all other warranties are
hereby expressly disclaimed, including without limitation the
implied warranty of merchantability and the implied warranty
of fitness for a particular purpose. Chaney expressly disclaims
We recommend that you visit us at
liability for special, consequential or incidental damages,
www.AcuRite.com for the fastest way to register all
whether arising in tort or by contract from any breach of this
your product. However, product registration
warranty. Some states do not allow the exclusion or limitation
of incidental or consequential damages, so the above limitation
does not eliminate the need to retain your
or exclusion may not apply to you. Chaney further disclaims all
original proof of purchase in order to obtain
liability from personal injury relating to its products to the extent
warranty benefits.
permitted by law. By acceptance of any of Chaney’s products,
Chaney Instrument Co. warrants that all products it manufactures the purchaser assumes all liability for the consequences arising
from their use or misuse. No person, firm or corporation is
to be of good material and workmanship, and to be free of
authorized to assume for Chaney any other liability in connection
defects when properly installed and operated for a period of
with the sale of its products. Furthermore, no person, firm or
one year from the date of purchase. Remedy for breach of this
corporation is authorized to modify or waive the terms of this
warranty is limited to repair or replacement of the defective
paragraph, and the preceding paragraph, unless done in writing
item(s). Any product which, under normal use and service, is
and signed by a duly authorized agent of Chaney. This warranty
proven to breach the warranty contained herein within ONE
gives you specific legal rights, and you may also have other
YEAR from date of sale will, upon examination by Chaney,
rights which vary from state to state.
and at its sole option, be repaired or replaced by Chaney.
Transportation costs and charges for returned goods shall
For in-warranty claims:Chaney Instrument Co.
be paid for by the purchaser. Chaney hereby disclaims all
965 Wells St., Lake Geneva, WI 53147
responsibility for such transportation costs and charges. This
15
Weather
Stations
Temperature
& Humidity
Weather
Alert Radio
Kitchen
Thermometers
& Timers
Clocks
It’s more than accurate, it’s
AcuRite offers an extensive assortment of precision instruments,
designed to provide you with information you can depend on to
Plan your day with confidence™.
www.AcuRite.com
Printed in China
02041 INST 030714
©Chaney Instrument Co. All rights reserved. AcuRite is a registered trademark of
the Chaney Instrument Co., Lake Geneva, WI 53147. All other trademarks and copyrights are the property of their respective owners. AcuRite uses patented technology.
Visit www.AcuRite.com/patents for details.