Epson DM-D500 User`s manual

EPSON Advanced Printer
DM-D Printer Driver
User’s Manual
Revision B
Seiko Epson Corporation
Notes
(1) Reproduction of this documentation by any means in part or in whole is prohibited.
(2) Contents of this documentation are subject to change without notice.
(3) Epson will not be responsible for any consequences resulting from the use of any information in this documentation.
(4) Comments and notification of any mistakes in this documentation are gratefully accepted.
Trademarks
Microsoft, Windows 95, Windows 98, Windows NT, Windows 2000, Windows XP, Visual Basic and Visual C++ are trademarks
and registered trademarks of Microsoft Corporation, USA.
Epson and ESC/POS are registered trademarks of Seiko Epson Corporation.
All other company names and trademarks mentioned in this documentation are the property of their respective owners.
Contents
1.
INTRODUCTION................................................................................................................................................................................3
2.
OPERATING ENVIRONMENT .....................................................................................................................................................3
2.1.
Operating Systems ............................................................................................................................................................................ 3
2.2.
Computer............................................................................................................................................................................................ 3
2.3.
DM-D customer display................................................................................................................................................................... 4
3.
INSTALLATION..................................................................................................................................................................................5
3.1.
Installation Package .......................................................................................................................................................................... 5
3.2.
Installation Steps ............................................................................................................................................................................... 7
3.2.1.
ADM_301aE_with_TM.exe......................................................................................................................................................... 7
3.2.2.
ADM_301aE_without_TM.exe .................................................................................................................................................... 9
4.
PRINTER SETTINGS ......................................................................................................................................................................10
5.
PRINTER FONTS ..............................................................................................................................................................................10
6.
SPECIAL FUNCTIONS ...................................................................................................................................................................10
6.1.
Special Function for DM-D10x/20x, DM-D120 Printer Driver ............................................................................................. 10
6.2.
Special Function for DM-D50x Printer Driver.......................................................................................................................... 11
6.3.
Cautions on Use of Special Functions......................................................................................................................................... 11
7.
NOTE.....................................................................................................................................................................................................12
8.
APPENDIX A: PRINTER DRIVER SPECIFICATION.........................................................................................................13
8.1.
DM-D10x/20x, DM-D110/210 Printer Driver........................................................................................................................... 13
8.2.
DM-D50x Printer Driver................................................................................................................................................................ 14
9.
8.2.1.
DM-D500Graphic Driver.......................................................................................................................................................... 14
8.2.2.
DM-D500 42x8 Driver.............................................................................................................................................................. 14
8.2.3.
DM-D500 32x4 Driver.............................................................................................................................................................. 15
8.2.4.
DM-D500 32x3 Driver.............................................................................................................................................................. 15
8.2.5.
DM-D500 32x2 Driver.............................................................................................................................................................. 16
8.2.6.
DM-D500 20x2 Driver.............................................................................................................................................................. 16
APPENDIX B : POINT SIZE OF THE PRINTER FONT ......................................................................................................17
9.1.
10.
Printer Driver for DM -D ................................................................................................................................................................ 17
APPENDIX C: SUPPORT FUNCTIONS LIST BY CONTROL FONTS..........................................................................18
1. Introduction
This driver is a Windows Printer Drivers for the EPSON DM-D customer display. Through the use of this driver, it is possible
to display from a Windows application.
This manual explains the items necessary when handling this driver. Please be sure to read this manual before using this
driver in order to utilize the functions of this driver fully and use it correctly.
2. Operating Environment
2.1. Operating Systems
The driver operation has been verified with the following operating systems.
• Microsoft Windows NT4.0 SP6a English
• Microsoft Windows 2000 SP4 English
• Microsoft Windows XP SP1 English
• Microsoft Windows XP Embedded
This driver is not supported by Windows 95/98.
The EPSON DM -D120 printer driver cannot be used with Windows NT 4.0.
2.2. Computer
This software supports the following computer on which the above operating systems are run.
• AT Compatible Machines
TITLE
Revision
EPSON Advanced Printer Driver
DM-D Printer Driver User’s Manual
No
NEXT
B
4
SHEET
3
2.3. DM-D customer display
This software is compatible with the DM-D customer display shown in the table below.
Please install the printer driver that is appropriate for your use.
Also, for details of the paper sizes and names of printer fonts, etc. Supported by each driver, see Appendix A.
DM-D Customer display
Printing paper
Driver name
DM-D10X/20X(*1)
Customer Display
EPSON DM -D10X/20X
DM-D110/210
Customer Display
EPSON DM -D110/210
DM-D120
Customer Display
EPSON DM -D120
DM-D50X
Customer Display (Graphic mode)
EPSON DM -D50X Graphics
Customer Display (Text mode)
EPSON DM -D50X 42x8
EPSON DM -D50X 32x4
EPSON DM -D50X 32x3
EPSON DM -D50X 32x2
EPSON DM -D50X 20x2
(*1) DM-D202 is not supported.
[Caution]
• Concerning the printer driver for the DM-D50x, please install and use the respective drivers that meet your specific needs,
such as graphic status display, the size of display characters required, etc.
TITLE
Revision
EPSON Advanced Printer Driver
DM-D Printer Driver User’s Manual
No
NEXT
B
5
SHEET
4
3.Installation
3.1.Installation Package
There are two packages for installing the driver. To install the driver, choose the appropriate package based on your connecting
method for the PC and a DM-D and the version of the EPSON Advanced Printer Driver used with the TM printer.
Determine the version of the EPSON Advanced Printer Driver for the TM printer by the selected port name from the Ports tab of
the Properties of the TM printer driver to which the DM -D is connected.
When the port is ESDPRTxxx, then the version is Ver3.xx or later
When the port is other than ESDPRTxxx, then the version is Ver2.xx
1. Stand alone connection: Use ADM_301aE_without_TM.exe for the installation. With EPSON IR-700, a stand alone
connection is used. However, perform the installation described in 3.2.1 Installing on Windows 2000/XP (1).
PC
DM-D
TITLE
Revision
EPSON Advanced Printer Driver
DM-D Printer Driver User’s Manual
No
NEXT
B
6
SHEET
5
2. Pass through connection: Use the appropriate driver version depending on the printer driver of the TM printer to be
connected.
Ver3.xx or later: Use ADM_301aE_with_TM.exe for the installation
Ver2.xx: Use ADM_301aE_without_TM.exe for the installation.
PC
DM-D
TM Printer
3. Y connection: Use the appropriate driver version depending on the printer driver of the TM printer to be connected. A Y
connection is also used when using EPSON IR-3x0 and EPSON SR-600 in the TM/DM mode or DRW/DM-D mode.
Ver3.xx or later: Use ADM_301aE_with_TM.exe for the installation
Ver2.xx: Use ADM_301aE_without_TM.exe for the installation.
PC
DM-D
TM Printer
PC
TM Printer
DM-D
4. Connection to a UB-U: Use the appropriate driver version depending on the printer driver of the TM printer to be
connected.
Ver3.xx or later: Use ADM_301aE_with_TM.exe for the installation
Ver2.xx: Use ADM_301aE_without_TM.exe for the installation
PC
UB-U
TM Printer
DM-D
TITLE
Revision
EPSON Advanced Printer Driver
DM-D Printer Driver User’s Manual
No
NEXT
B
7
SHEET
6
3.2.Installation Steps
3.2.1.ADM_301aE_with_TM.exe
Installing on Windows NT4.0
1. When you execute the ADM_301aE_with_TM.exe file, the files are extracted. follow the Setup Wizard.
2. Click on the Start button, and then click on Settings Printers.
3. Double click on the Add Printer icon.
4. Select My Computer, and then click Next.
5. Select the port(s) that you want to use for the printer, and then click on Next.
6. Click the Have Disk button.
7. Type in the pathname which is specified at 1. (Default: C:\ EPSON Advanced Printer
Driver\ADM_301E_with_TM\WinNT40). Then click on OK.
8. Select the printer driver you wish to install, and then click on the Next button.
9. Type in the printer name you wish to use for this printer, and then click on Next.
10. Select whether you wish to allow the printer to be shared by other computers. Then click on Next.
11. Select whether or not to print a test page, and then click on Finish,.
12. If a dialog such as requested RASDD.DLL appears while installation is in progress, insert your Windows NT 4.0 installation
disk and click on OK.
13. When installation is finished, an icon with the name of the newly installed printer driver will appear in the Printers
14. When you use DM-D10x,20x driver in WindowsNT4.0, please set up the print processor as follows.
15. When you execute the Dpp104e.exe in specified at 1. (Default: C:\ EPSON Advanced
PrinterDriver\DMD210_for_APD2E\ winNT40), the print processor is installed.
16. Select a printer driver icon in the printer window and click a [Properties]. Properties dialog is shown.
17. Display a [General] tag sheet and click a [Print Processor] button. Print Processor dialog is shown.
18. Select a DMPROCES in the lis t box of print processor.
19. Click a [OK] button.
20. If you can not print correct using test page, please make sure the setting of following points are as same as the setting of
connected device.
- Is the port you are connecting correctly? (ESDPRTxxx,)
- Particularly in the case of a serial connection, are the communications conditions set correctly?
Installing on Windows 2000/XP (1)
When connecting a DM-D customer display to COM4 of EPSON IR-700, use this procedure for installation. In all other cases,
refer to Installing on Windows2000/XP (2).
1. Before installing the DM-D printer driver, it is first necessary to install the EPSON Advanced Printer Driver Ver3 for the TM
printer. Even if you are not using a TM printer, first install the EPSON Advanced Printer Driver Ver3 for any TM printer. In this
case, always install it with the appropriate serial driver. Refer to the EPSON Advanced Printer Driver Ver3 installation manual
for details.
2. Execute ADM_301a E_with_TM.exe, and expand the file according to the instructions displayed.
3. Click Start, and click Settings -> Printers.
4. Double click the Add Printer icon.
5. The Add Printer Wizard appears.
6. Select Local printer, and clear the Automatically detect and install my Plug and Play printer check box. Click Next.
7. Select Create a new port, and select EPSON TM/BA/EU Printer Port Ver3 for Type. Click Next.
8. The Add Port dialog box appears. Select an unused number for Port Name, select Serial and COM4 for Port Type, and click
OK.
9. Click Have Dis k.
10. Enter a path for expanding the file specified in 2. After entering a path, click OK.
Example) Default: C:\ EPSON Advanced Printer Driver\ADM_301E_with_TM\Win2kXP
TITLE
Revision
EPSON Advanced Printer Driver
DM-D Printer Driver User’s Manual
No
NEXT
B
8
SHEET
7
11. Select the printer driver to install and click Next.
12. Enter the printer name and click Next.
13. Set whether to share the printer with another printer and click Next.
14. After selecting whether to print a test page, click Next.
15. After checking the printer settings, click Finish.
16. The Digital Signature Not Found dialog box appears. Click Yes. Although the digital signature is not acquired, normal
operation has been confirmed.
17. When installation finishes, the icon of the installed printer driver appears in the printer window.
18. Select the icon of the printer driver in the printer window, and click Properties to display the printer driver Properties dialog
box.
19. Click the Advanced tab of the printer driver Properties dialog box, and click Print Processor to display the Print Processor
dialog box.
20. You can select a print processor in the Print processor list box. Here, select DMPROCES.
21. After finishing the settings, click OK.
22. Clear the Enable advanced printing features check box in the Advanced tab of the printer driver Properties dialog box, and
click OK.
23. Restart the computer.
After restarting the computer, if the test page is not printed correctly, check that the following settings are the same as the settings
of the DM-D customer display.
- The connected port (ESDPRTxxx) is set to COM4.
- The COM4 communication speed, flow control and so on are set to the same as those of the DM-D customer display.
Installing on Windows 2000/XP (2)
1. When you execute the ADM_301aE_with_TM.exe file, the files are extracted. follow the Setup Wizard.
2. Click on the Start button, and then click on Settings Printers.
3. Double click on the Add Printer icon.
4. Select My Computer, and then click Next.
5. Select the port(s) that you want to use for the printer, and then click on Next.
6. Click the Have Disk button.
7. Type in the pathname which is specified at 1. (Default: C:\ EPSON Advanced Printer
Driver\ADM_301E_with_TM\Win2kXP). Then click on OK.
8. Select the printer driver you wish to install, and then click on the Next button.
9. Type in the printer name you wish to use for this printer, and then click on Next.
10. Select whether you wish to allow the printer to be shared by other computers. Then click on Next.
11. Select whether or not to print a test page, and then click on Finish,.
12. The warning will appear. The warning in dictates that the digital signature approved by Microsoft was not obtained; however
this does not affect the system operation, which has been confirmed by EPSON. Click the [Continue Anyway] button.
13. When installation is finished, an icon with the name of the newly installed printer driver will appear in the Printers
14. Select a printer driver icon in the printer window and click a [Properties]. Properties dialog is shown.
15. Display a [General] tag sheet and click a [Print Processor] button. Print Processor dialog is shown.
16. Select a DMPROCES in the list box of print processor.
17. Click a [OK] button.
18. If you can not print correct using test page, please make sure the setting of following points are as same as the setting of
connected device.
- Is the port you are connecting correctly? (ESDPRTxxx)
- Particularly in the case of a serial connection, are the communications conditions set correctly?
TITLE
Revision
EPSON Advanced Printer Driver
DM-D Printer Driver User’s Manual
No
NEXT
B
9
SHEET
8
3.2.2.ADM_301aE_without_TM.exe
Installing on Windows NT4.0
1. When you execute the ADM_301aE_without_TM.exe file, the files are extracted. follow the Setup Wizard.
2. Click on the Start button, and then click on Settings Printers.
3. Double click on the Add Printer icon.
4. Select My Computer, and then click Next.
5. Select the port(s) that you want to use for the printer, and then click on Next.
6. Click the Have Disk button.
7. Type in the pathname which is specified at 1. (Default: C:\ EPSON Advanced Printer
Driver\ADM_301E_without_TM\WinNT40). Then click on OK.
8. Select the printer driver you wish to install, and then click on the Next button.
9. Type in the printer name you wish to use for this printer, and then click on Next.
10. Select whether you wish to allow the printer to be shared by other computers. Then click on Next.
11. Select whether or not to print a test page, and then click on Finish,.
12. If a dialog such as requested RASDD.DLL appears while installation is in progress, insert your Windows NT 4.0 installation
disk and click on OK.
13. When installation is finished, an icon with the name of the newly installed printer driver will appear in the Printers
14. When you use DM-D10x,20x driver in WindowsNT4.0, please set up the print processor as follows.
15. When you execute the Dpp104e.exe in specified at 1. (Default: C:\ EPSON Advanced
PrinterDriver\DMD210_for_APD2E\ winNT40), the print processor is installed.
16. Select a printer driver icon in the printer window and click a [Properties]. Properties dialog is shown.
17. Display a [General] tag sheet and click a [Print Processor] button. Print Processor dialog is shown.
18. Select a DMPROCES in the list box of print processor.
19. Click a [OK] button.
20. If you can not print correct using test page, please make sure the setting of following points are as same as the setting of
connected device.
- Is the port you are connecting correctly? (COMx)
- Particularly in the case of a serial connection, are the communications conditions set correctly?
Installing on Windows 2000/XP
1. When you execute the ADM_301aE_without_TM.exe file, the files are extracted. follow the Setup Wizard.
2. Click on the Start button, and then click on Settings Printers.
3. Double click on the Add Printer icon.
4. Select My Computer, and then click Next.
5. Select the port(s) that you want to use for the printer, and then click on Next.
6. Click the Have Disk button.
7. Type in the pathname which is specified at 1. (Default: C:\ EPSON Advanced Printer
Driver\ADM_301E_without_TM\Win2kXP). Then click on OK.
8. Select the printer driver you wish to install, and then click on the Next button.
9. Type in the printer name you wish to use for this printer, and then click on Next.
10. Select whether you wish to allow the printer to be shared by other computers. Then click on Next.
11. Select whether or not to print a test page, and then click on Finish,.
12. The warning will appear. The warning in dictates that the digital signature approved by Microsoft was not obtained; however
this does not affect the system operation, which has been confirmed by EPSON. Click the [Continue Anyway] button.
13. When installation is finished, an icon with the name of the newly installed printer driver will appear in the Printers
14. Select a printer driver icon in the printer window and click a [Properties]. Properties dialog is shown.
15. Display a [General] tag sheet and click a [Print Processor] button. Print Processor dialog is shown.
16. Select a DMPROCES in the list box of print processor.
17. Click a [OK] button.
18. If you can not print correct using test page, please make sure the setting of following points are as same as the setting of
connected device.
- Is the port you are connecting correctly? (COMx)
- Particularly in the case of a serial connection, are the communications conditions set correctly?
TITLE
Revision
EPSON Advanced Printer Driver
DM-D Printer Driver User’s Manual
No
NEXT
B
10
SHEET
9
4.Printer Settings
For the paper size, the graphics printing resolution and the print quality paper sizes that can be specified in each driver, see
Appendix A.
5.Printer Fonts
For the printer fonts that can be specified by each driver, see Appendix A. Also, for the point sizes that can be specified for
each printer font, see Appendix B.
6.Special Functions
Using this driver, the inherent functions of the DM-D customer display can be executed.
In order to actually use these functions, an exclusive printer font called “control” is provided. If the “control” font is specified
and the characters in the following table are input, then printing performed, the corresponding function is executed.
6.1.Special Function for DM-D10x/20x, DM-D120 Printer Driver
Character
Special Function
a
Clear screen (CLR)
b
Clear 1st line (CAN for 1st Line)
c
Clear 2nd line (CAN for 2nd Line)
d
Screen is always lighting
e
Screen is blinking at 10x50msec intervals
f
Screen is blinking at 20x50msec intervals.
G
Screen is blinking at 40x50msec intervals
h
Screen is blinking at 60x50msec intervals.
I
Put out light with saving displayed contents.
J
Set and display a counter time. (US T h m)
k
Display a counter. (US U)
l
Enable reversed character (US r n)
m
Disable reversed character (US r n)
n
Define macro process (US :)
o
Do macro process (US ^ n m, n=5 m=60)
TITLE
Revision
EPSON Advanced Printer Driver
DM-D Printer Driver User’s Manual
No
NEXT
B
11
SHEET
10
6.2. Special Function for DM-D50x Printer Driver
Character
Special Function
a
Clear screen (CLR)
d
Screen is always lighting
e
Screen is blinking at 10x50msec intervals
f
Screen is blinking at 20x50msec intervals.
g
Screen is blinking at 40x50msec intervals
h
Screen is blinking at 60x50msec intervals.
i
Put out light with saving displayed contents.
j
Set and display a counter time. (US T h m)
k
Display a counter. (US U)
l
Enable reversed character (US r n)
m
Disable reversed character (US r n)
n
Define macro process (US :)
o
Do macro process (US ^ n m, n=5 m=60)
p
Clear 1st line (CAN for 1st Line)
q
Clear 2nd line (CAN for 2nd Line)
r
Clear 3rd line (CAN for 3rd Line)
s
Clear 4th line (CAN for 4th Line)
t
Clear 5th line (CAN for 5th Line)
u
Clear 6th line (CAN for 6th Line)
v
Clear 7th line (CAN for 7th Line)
w
Clear 8th line (CAN for 8th Line)
G
NV bit image No. 1 is printed in the Normal mode.
H
NV bit image No. 2 is printed in the Normal mode.
I
NV bit image No. 3 is printed in the Normal mode.
J
NV bit image No. 4 is printed in the Normal mode.
K
NV bit image No. 5 is printed in the Normal mode.
[
NV bit image No. 1 is printed in the Double Height Double Width mode.
]
NV bit image No. 2 is printed in the Double Height Double Width mode.
^
NV bit image No. 3 is printed in the Double Height Double Width mode.
_
NV bit image No. 4 is printed in the Double Height Double Width mode.
`
NV bit image No. 5 is printed in the Double Height Double Width mode.
Caution: “j” and “k” are supported with only EPSON DM-D50x 20x2.
6.3. Cautions on Use of Special Functions
• Depending on the printer, there are some functions that are not supported. For the special functions that can be specified
by each driver, see Appendix A.
• Printing of characters in the “control” font is not executed. However, if characters which a function does not set are
specified, those characters are displayed.
TITLE
Revision
EPSON Advanced Printer Driver
DM-D Printer Driver User’s Manual
No
NEXT
B
12
SHEET
11
7. Note
1)
If this driver is used with serial connections in Windows NT 4.0 or Windows2000/XP, it may be impossible to print
normally with some combinations of personal computer and printer. In this case, it will be possible to print normally by
disabling FIFO in the Windows NT 4.0,Windows2000,WindowsXP COM port detailed settings.
2)
Even if strike through, italics and other attributes are specified for characters printed using printer fonts, they are
disregarded.
3)
Driver EPSON DM-D10X/20X doesn't support DM-D202. Also, If TM printer doesn't work if it is connected with
DM-D202.
4)
If any of Customer display DM -D101, 105 or 205 is used independently without connecting to TM Printer, it may not
displayed correctly. If so, please connect the connect terminal of Customer Display's Printer with the loop-back connector
which is shorted between TxD-RxD and DTR-DSR and RTS-CTS.
5)
Though sometimes the paper size displayed in property is not contained in the paper sizes that are listed in Appendix A of
this manual, please use a paper size that is described in User's manual.
6) Separator page in the printer’s “Properties” dialog is not supported.
7) The DM-D driver cannot display underlines.
8) With Windows2000/ XP, “Set detailed printing function enabled” that can be specified in a driver property cannot be used.
9) With Windows XP, if multiple users log in on one PC, printing will not perform correctly.
10) When using the printer driver for the DM-D customer display included in ADM_301a E_with_TM.exe connected to the
UB-U, there is a delay of about 5 seconds between printing separate documents.
TITLE
Revision
EPSON Advanced Printer Driver
DM-D Printer Driver User’s Manual
No
NEXT
B
13
SHEET
12
8. Appendix A: Printer Driver Specification
8.1.DM-D10x/20x, DM-D110/210 Printer Driver
Specification
Driver name
EPSON DM -D10X/20X
EPSON DM -D110/210
EPSON DM -D120
Supported Printer
DM-D 1st Line
font name
DM-D 2nd Line
Supported printer
control
font name for
special function
Supported
72 x 72
resolution
Supported paper
DM-D display size
size
35.2 x 16mm (100 x 45dot)
Supported paper
DM-D 2line mode
source
Supported print
Brightness 20%
Quality
Brightness 40%
Brightness 60%
Brightness 100% (default)
TITLE
Remarks
Version1.03
DM Page:16(WPC1252)
Refer to 10. Appendix C: Support functions
list by control fonts
Graphic data is not displayed.
Revision
EPSON Advanced Printer Driver
DM-D Printer Driver User’s Manual
No
NEXT
B
14
SHEET
13
8.2.DM-D50x Printer Driver
8.2.1. DM-D500Graphic Driver
Driver name
Supported Printer
font name
Supported printer
font name for
special function
Supported
resolution
Supported paper
size
Supported paper
source
Supported print
Quality
Specification
EPSON DM -D50X Graphics
DM-D FontA
DM-D FontB
control
Remarks
Version1.02
DM Page:16(WPC1252)
Refer to 10. Appendix C: Support functions
list by control fonts
72 x 72
DM-D50x display
90.3 x 22.5mm (256 x 64dot)
DM-D Graphics mode
Brightness 20%
Brightness 40%
Brightness 60%
Brightness 100% (default)
8.2.2. DM-D500 42x8 Driver
Specification
Driver name
EPSON DM -D50X 42x8
Supported Printer
DM-D 1st Line
font name
DM-D 2nd Line
DM-D 3rd Line
DM-D 4th Line
DM-D 5th Line
DM-D 6th Line
DM-D 7th Line
DM-D 8th Line
Supported printer
control
font name for
special function
Supported
72 x 72
resolution
Supported paper
DM-D50x display
size
90.3 x 22.5mm (256 x 64dot)
Supported paper
DM-D 42x8 mode
source
Supported print
Brightness 20%
Quality
Brightness 40%
Brightness 60%
Brightness 100% (default)
TITLE
Remarks
Version1.03
DM Page:16(WPC1252)
Refer to 10. Appendix C: Support functions
list by control fonts
Graphic data is not displayed.
Revision
EPSON Advanced Printer Driver
DM-D Printer Driver User’s Manual
No
NEXT
B
15
SHEET
14
8.2.3. DM-D500 32x4 Driver
Specification
Driver name
EPSON DM -D50X 32x4
Supported Printer
DM-D 1st Line
font name
DM-D 2nd Line
DM-D 3rd Line
DM-D 4th Line
Supported printer
control
font name for
special function
Supported
72 x 72
resolution
Supported paper
DM-D50x display
size
90.3 x 22.5mm (256 x 64dot)
Supported paper
DM-D 32x4 mode
source
Supported print
Brightness 20%
Quality
Brightness 40%
Brightness 60%
Brightness 100% (default)
Remarks
Version1.03
DM Page:16(WPC1252)
Refer to 10. Appendix C: Support functions
list by control fonts
Graphic data is not displayed.
8.2.4. DM-D500 32x3 Driver
Specification
Driver name
EPSON DM -D50X 32x3
Supported Printer
DM-D 1st Line
font name
DM-D 2nd Line
DM-D 3rd Line
Supported printer
control
font name for
special function
Supported
72 x 72
resolution
Supported paper
DM-D50x 2Lines display
size
56.4 x 22.5mm (160 x 64dot)
Supported paper
DM-D 32x3 mode
source
Supported print
Brightness 20%
Quality
Brightness 40%
Brightness 60%
Brightness 100% (default)
TITLE
Remarks
Version1.03
DM Page:16(WPC1252)
Refer to 10. Appendix C: Support functions
list by control fonts
Graphic data is not displayed.
Revision
EPSON Advanced Printer Driver
DM-D Printer Driver User’s Manual
No
NEXT
B
16
SHEET
15
8.2.5. DM-D500 32x2 Driver
Specification
Driver name
EPSON DM -D50X 32x2
Supported Printer
DM-D 1st Line
font name
DM-D 2nd Line
Supported printer
control
font name for
special function
Supported
72 x 72
resolution
Supported paper
DM-D display size
size
90.3 x 22.5mm (256 x 64dot)
Supported paper
DM-D 32x2 mode
source
Supported print
Brightness 20%
Quality
Brightness 40%
Brightness 60%
Brightness 100% (default)
Remarks
Version1.03
DM Page:16(WPC1252)
Refer to 10. Appendix C: Support functions
list by control fonts
Graphic data is not displayed.
8.2.6. DM-D500 20x2 Driver
Specification
Driver name
EPSON DM -D50X 20x2
Supported Printer
DM-D 1st Line
font name
DM-D 2nd Line
Supported printer
control
font name for
special function
Supported
72 x 72
resolution
Supported paper
size
Supported paper
source
Supported print
Quality
Remarks
Version1.03
DM Page:16(WPC1252)
Refer to 10. Appendix C: Support functions
list by control fonts
Graphic data is not displayed.
DM-D display size
90.3 x 22.5mm (256 x 64dot)
DM-D 20 x 2 mode
Brightness 20%
Brightness 40%
Brightness 60%
Brightness 100% (default)
TITLE
Revision
EPSON Advanced Printer Driver
DM-D Printer Driver User’s Manual
No
NEXT
B
17
SHEET
16
9. Appendix B: Point size of the printer font
9.1. Printer Driver for DM-D
Driver
D10X/20X
DD50X
D110/210
Graphics
D50X Text
D120
Font
14 Point
32x4mode
42x8mode
32x3mode
32x2mode
20x2mode
13 Point
5 Point
13 Point
13 Point
13 Point
control
7 Point
DM-D 1st Line
7 Point
13 Point
5 Point
13 Point
13 Point
13 Point
DM-D 2nd Line
7 Point
13 Point
5 Point
13 Point
13 Point
13 Point
DM-D 3rd Line
13 Point
5 Point
13 Point
DM-D 4th Line
13 Point
5 Point
DM-D 5th Line
5 Point
DM-D 6th Line
5 Point
DM-D 7th Line
5 Point
DM-D 8th Line
5 Point
DM-D FontA
13 Point
DM-D FontB
5 Point
TITLE
Revision
EPSON Advanced Printer Driver
DM-D Printer Driver User’s Manual
No
NEXT
B
18
SHEET
17
10.Appendix C: Support functions list by control fonts
DM-D10X/20X
DM-D50X
DM-D50X
DM-D50X
DM-D50X
DM-D50X
DM-D50x
DM-D110/210
Graphic
Text 32x4
Text 42x8
Text 32x3
Text 32x2
Text 20x2
DM-D120
a
yes
yes
yes
yes
yes
yes
yes
b
yes
-
-
-
-
-
-
c
yes
-
-
-
-
-
-
d
yes
yes
yes
yes
yes
yes
yes
e
yes
yes
yes
yes
yes
yes
yes
f
yes
yes
yes
yes
yes
yes
yes
g
yes
yes
yes
yes
yes
yes
yes
h
yes
yes
yes
yes
yes
yes
yes
i
yes
yes
yes
yes
yes
yes
yes
j
yes
-
-
-
-
-
yes
k
yes
-
-
-
-
-
yes
l
yes
yes
yes
yes
yes
yes
yes
m
yes
yes
yes
yes
yes
yes
yes
n
yes
yes
yes
yes
yes
yes
yes
o
yes
yes
yes
yes
yes
yes
yes
p
-
-
yes
yes
yes
yes
yes
q
-
-
yes
yes
yes
yes
yes
r
-
-
yes
yes
yes
-
-
s
-
-
yes
yes
-
-
-
t
-
-
-
yes
-
-
-
u
-
-
-
yes
-
-
-
v
-
-
-
yes
-
-
-
w
-
-
-
yes
-
-
-
G
-
yes
-
-
-
-
-
H
-
yes
-
-
-
-
-
I
-
yes
-
-
-
-
-
J
-
yes
-
-
-
-
-
K
-
yes
-
-
-
-
-
[
-
yes
-
-
-
-
-
]
-
yes
-
-
-
-
-
^
-
yes
-
-
-
-
-
_
-
yes
-
-
-
-
-
`
-
yes
-
-
-
-
-
TITLE
Revision
EPSON Advanced Printer Driver
DM-D Printer Driver User’s Manual
No
NEXT
B
19
SHEET
18