Roadmate The Personal Motorcycle Navigator User manual

Magellan®
Maestro™ 4040
User Manual
Magellan Navigation, Inc. 960 Overland Court, San Dimas, CA 91773
IMPORTANT SAFETY WARNINGS
The Magellan Maestro is a vehicle-navigation aid designed to assist you in arriving to your selected destinations. When using
the Magellan Maestro, these safety rules must be followed to prevent accidents that can result in injury or death to yourself
or others:
•
•
•
•
•
•
•
•
California and Minnesota law prohibits mounting any item to your windshield. Please check with your state or local law
enforcement for applicable regulations regarding windshield mounting. Go to www.magellanGPS.com for alternate
mounting solutions. An adhesive disk is supplied with the Magellan RoadMate for use as an alternate mounting solution
to the dashboard.
When driving, the need to view the display is minimal. Voice prompts will guide you to your destination. The driver
should enter data or program the Magellan Maestro only when the vehicle is stopped. Only a vehicle passenger should
enter data or program the Magellan Maestro while the vehicle is moving.
It is your responsibility to comply with all traffic laws.
Every attempt is made to ensure that the database is accurate. However, roadways, points of interest (POIs), and
business and service locations may change over time. The database does not include, analyze, process, consider, or
reflect any of the following: legal restrictions (such as vehicular type, weight, height, width, load and speed restrictions);
road slope or grade; bridge height, width, weight, or other limits; population density; neighborhood quality or safety;
availability or proximity of law enforcement, emergency rescue, medical, or other assistance; construction work zones or
hazards; road or lane closures; road, traffic, or traffic facilities’ safety or condition; weather conditions; pavement
characteristics or conditions; special events; traffic congestion. It is your responsibility to disregard any unsafe,
hazardous, or illegal route suggestions.
Keep the Magellan Maestro safe from extreme temperature conditions. For example, do not leave it exposed to direct
sunlight for an extended period of time.
Take care when mounting the Magellan Maestro in your vehicle, whether using the windshield mount or other mount or
accessories, that it does not obstruct the driver's view of the road, interfere with the operation of the vehicle's safety
devices such as air bags, or present a hazard to occupants of the vehicle should the Magellan Maestro be dislodged
while driving. You assume the risks associated with damage to your vehicle or vehicle occupants as the result of your
choices in mounting the Magellan Maestro.
Laws in some states prohibit wearing stereo headphones while operating a motor vehicle. Please contact your state’s
Department of Motor Vehicles for information.
The battery in the Magellan Maestro is rechargeable and should not be removed. In the event it should need to be
replaced, please contact Magellan Technical Support.
About Charging the Magellan Maestro
•
•
•
•
•
Use only the AC adapter approved for your Magellan Maestro. Use of another type of AC adapter can result in
malfunction and/or possible fire hazard due to battery over heating.
Use only the car charger approved for / supplied with your Magellan Maestro. Use of another type of car charger will
result in malfunction and/or damage to the receiver.
The Magellan Maestro is intended to be supplied with a LISTED Power Unit marked with "LPS", "Limited Power Source"
and output rated + 5 V dc / 2.0 A".
Use the USB cable approved for / supplied with your Magellan Maestro.
For safety reasons, the battery in your Magellan Maestro will stop charging when the ambient temperature is less than
32°F (0°C) or more than 113°F (45°C)
i
IMPORTANT SAFETY WARNINGS
About the AC Adapter
•
•
•
•
•
Do not use the adapter in a high moisture environment. Never touch the adapter when your hands or feet are wet.
Allow adequate ventilation around the adapter when using it to operate the device or charging the battery. Do not cover
the AC adapter with paper or other objects that will reduce cooling. Do not use the AC adapter while it is inside a
carrying case.
Connect the adapter to a proper power source. The voltage and grounding requirements are found on the product case
and/or packaging.
Do not use the adapter if the cord becomes damaged.
Do not attempt to service the Magellan Maestro. There are no serviceable parts inside. Replace the Magellan Maestro if
it is damaged or exposed to excess moisture.
About the Battery
•
•
Do not attempt to replace the battery. Please contact Magellan Technical Support for issues related to the battery.
Use the charger approved for your Magellan Maestro.
ii
IMPORTANT SAFETY WARNINGS
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one of the following measures:
•
•
•
•
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate this equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must
follow the specific operating instructions for satisfying RF exposure compliance.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
In order to maintain compliance with FCC regulations, shielded cables must be used with this equipment. Operation with
non-approved equipment or unshielded cables is likely to result in interference to radio and TV reception. The user is
cautioned that changes and modifications made to the equipment without the approval of manufacturer could void the user's
authority to operate this equipment.
The Magellan Maestro must be installed and operated at a distance no closer then 8 inches (20 cm) from the user.
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numerique de la classe B respecte toutes les exigences du Reglement sur le materiel brouilleur du Canada.
iii
IMPORTANT SAFETY WARNINGS
IC statement
Operation is subject to the following two conditions:
1.
2.
This device may not cause interference and
This device must accept any interference, including interference that may cause undesired operation of the
device.
IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. End users must follow
the specific operating instructions for satisfying RF exposure compliance.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
© 2007 Magellan Navigation, Inc. All rights reserved. The Magellan Logo, Magellan, Maestro, Turn it on and go, TrueView,
QuickSpell, SmartDetour, and SmartVolume are trademarks of Magellan Navigation, Inc. No part of this user manual may be
reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, for
any purpose other than the purchaser’s personal use, without the prior written permission of Magellan Navigation, Inc.
631449-01 A
iv
Table of Contents
Magellan Maestro 4040 ..........................................................................................................1
Front View ............................................................................................................. 2
Side Views ............................................................................................................. 2
Back View ............................................................................................................. 2
Installation Instructions ...........................................................................................................3
Selecting the Location ............................................................................................ 3
Cleaning the Area ................................................................................................... 3
Applying the Adhesive Disk ..................................................................................... 3
Attach the Cradle ................................................................................................... 3
Attach the Adjustable Mount ................................................................................... 4
Secure the Mount to the Windshield or Adhesive Disk ................................................ 4
Adjust the Mount for Optimum Viewing .................................................................... 4
Connecting Power .................................................................................................. 4
Security ................................................................................................................ 4
Fundamentals ..........................................................................................................................5
Powering on the Magellan Maestro ........................................................................... 5
Turning the Magellan Maestro On ........................................................................ 5
Turning the Magellan Maestro Off ....................................................................... 5
Selecting Auto-Power Shutdown Time .................................................................. 5
Volume 5
Changing the Volume from the Map Screen. ......................................................... 5
Changing the Volume from User Options .............................................................. 6
Brightness 6
Accessing the Brightness Control ........................................................................ 6
The Main Menu ...................................................................................................... 6
Accessing the Main Menu ................................................................................... 6
.Main Menu - Page 1 ......................................................................................................7
.Main Menu - Page 2 ......................................................................................................8
The Keypad ........................................................................................................... 9
Keypad Overview ............................................................................................................9
Special Keys ..................................................................................................... 9
Selecting From List .........................................................................................................9
QuickSpell™ ................................................................................................................ 10
Notes on Entering Data .................................................................................................10
Map Screen .......................................................................................................................... 11
Accessing the Map Screen ................................................................................ 13
Table of Contents
Magellan Maestro 4040
1
2D Mode ......................................................................................................................13
Setting the Map Modes (2D or 3D) .................................................................... 13
Panning on the Map ......................................................................................... 13
Saving a Position While Panning ....................................................................... 13
Routing to a Panned Position ............................................................................ 14
Current Location Screen ....................................................................................... 14
Accessing the Current Location Screen .............................................................. 14
Saving Your Current Location to Your Address Book ............................................ 14
Maneuver List Screen ........................................................................................... 15
Accessing the Maneuver List ............................................................................. 15
Excluding a Maneuver ...................................................................................... 15
GPS Status Screen ............................................................................................... 16
Accessing the GPS Status Screen ..................................................................... 16
Zoom Levels ........................................................................................................ 16
Setting Zoom Levels ........................................................................................ 16
Volume ................................................................................................................ 16
Changing the Volume from the Map Screen. ....................................................... 16
Home Address ....................................................................................................................... 17
Creating a Home Address ................................................................................. 17
Creating a Route to the Home Address ............................................................... 17
Changing the Home Address ............................................................................. 17
Accessing the Home Address from the Address Book .......................................... 18
Enter Address 19
Entering an Address ............................................................................................. 19
Creating a Route to a New Address .................................................................... 19
My Addresses ....................................................................................................... 21
Accessing the My Addresses Menu .................................................................... 21
Previous Destinations ................................................................................................... 21
Routing to a Previous Destination ...................................................................... 21
Saving a Previous Destination to Your Address Book ............................................ 22
Deleting a Previous Destination ......................................................................... 22
Address Book ...............................................................................................................22
Accessing an Address in Your Address Book ....................................................... 22
Routing to an Address in Your Address Book ...................................................... 23
Editing an Address in Your Address Book. .......................................................... 23
Deleting an Address in Your Address Book. ........................................................ 23
Favorites ......................................................................................................................23
Accessing an Address from Favorites ................................................................. 23
Table of Contents
Magellan Maestro 4040
2
Routing to an Address from Your Favorites List ................................................... 24
Editing an Address from Your Favorites List ....................................................... 24
Deleting an Address from Your Favorites List ...................................................... 24
Creating a New Entry .................................................................................................... 24
Creating a New Entry to You Address Book by Selecting on the Map ..................... 24
Creating a New Entry to You Address Book by Entering an Address ....................... 25
Creating a New Entry to You Address Book from a POI ........................................ 25
Creating a New Entry to You Address Book from by Intersections .......................... 26
Intersection ......................................................................................................... 26
Creating a Route to Two Intersecting Streets ...................................................... 26
Points of Interest (POI) .......................................................................................................... 27
Categories and Subcategories ................................................................................ 27
Creating a Route to a POI by Category ............................................................... 27
Creating a Route to a POI by Name ................................................................... 28
Enhanced POIs .................................................................................................... 28
Loading a POI File ........................................................................................... 28
Selecting Categories for Display on the Map ....................................................... 29
Setting Alarms ................................................................................................ 29
Setting Alarm Parameters ................................................................................. 30
Routing to an Enhanced POI ............................................................................. 30
Saving an Enhanced POI to Your Address Book .................................................. 31
.......................................................................................................................... 31
AAA TourBook® ................................................................................................... 31
AAA TourBook® .................................................................................................................... 32
Overview .............................................................................................................. 32
AAA TourBook® ................................................................................................... 32
Accessing the AAA TourBook® .......................................................................... 32
AAA TourBook® Information ................................................................................. 33
Getting AAA TourBook® Information ................................................................. 33
Routing To the Selected POI ............................................................................. 33
Show Your Card & Save® ...................................................................................... 34
Getting Show Your Card & Save® Information ..................................................... 34
Routing to the Selected POI ............................................................................. 34
Approved Automotive Repairs ................................................................................ 35
Getting Approved Automotive Repair Information ................................................ 35
Routing to the Selected Automotive Facility ....................................................... 35
AAA Branch Offices .............................................................................................. 36
Getting AAA Branch Office Information .............................................................. 36
Routing to the Selected AAA Branch Office ........................................................ 36
Table of Contents
Magellan Maestro 4040
3
Campgrounds ....................................................................................................... 37
Getting Campground Information ...................................................................... 37
Routing To the Selected Campground ................................................................ 37
Travelling on a Route ............................................................................................................ 38
Map Screen ......................................................................................................... 38
Split-Screen .................................................................................................................. 38
Maneuver List ...............................................................................................................38
You Have Arrived .......................................................................................................... 39
Types of Routes ................................................................................................... 39
Route Method ...................................................................................................... 39
Special Routing Functions .................................................................................... 40
Routing to a POI Near an Approaching Freeway Exit ............................................ 40
Cancelling a Route .......................................................................................... 40
Detouring off a Route ....................................................................................... 40
Changing the Route Method ............................................................................. 41
Overview .............................................................................................................. 42
The AAA Roadside Assistance Screen ..................................................................... 42
Accessing AAA Roadside Assistance .................................................................. 42
Entering Your AAA Membership Number ............................................................ 42
Trip Planner .......................................................................................................................... 43
Creating a Trip ................................................................................................ 43
Starting a Trip ................................................................................................. 44
Editing a Trip .................................................................................................. 45
Deleting a Trip ................................................................................................ 45
Renaming a Trip .............................................................................................. 46
Exit POIs 47
Routing to a POI Near an Approaching Freeway Exit ............................................ 47
.......................................................................................................................... 47
Bluetooth .............................................................................................................................. 48
Introduction ......................................................................................................... 48
Accessing the Bluetooth Main Menu .................................................................. 48
Pair Mode ........................................................................................................... 48
Pairing a Phone to the Magellan Maestro ........................................................... 48
Establish Connection ............................................................................................ 49
Establishing a Bluetooth Connection ................................................................. 49
Place a call .......................................................................................................... 49
Placing a Call .................................................................................................. 49
Table of Contents
Magellan Maestro 4040
4
Placing a Call Using the Address Book ............................................................... 50
Placing a Call Using Call History ....................................................................... 50
Placing a Call Using Redial .............................................................................. 50
Failed Call .................................................................................................................... 50
Call Connected ..................................................................................................... 51
Incoming call ....................................................................................................... 51
Answering an Incoming Call .............................................................................. 51
User Options ......................................................................................................................... 52
Setting Map Region ......................................................................................... 52
Accessing System Settings ............................................................................... 52
Checking Battery Life ....................................................................................... 52
Adjusting the Volume ....................................................................................... 53
Adjusting the Display Brightness ....................................................................... 53
Setting Auto Power Off Time ............................................................................. 53
Selecting Language ......................................................................................... 54
Setting Time Zone ........................................................................................... 54
Selecting Units of Measure ............................................................................... 55
Displaying Contact Us Information .................................................................... 55
Displaying Product Information ......................................................................... 55
Performing Diagnostics .................................................................................... 56
Accessing the Trip Computer ............................................................................ 56
Selecting POIs to be Displayed on the Map ........................................................ 57
Deleting Addresses from the Address Book (Global) ............................................ 57
Setting the Map in 3D or 2D Mode .................................................................... 57
Setting the Map Display to Heading Up or North Up ........................................... 58
Setting Split Screen (TrueView™) Options ......................................................... 58
Setting Auto Night Map Display ........................................................................ 58
Setting Detour Options ..................................................................................... 59
Using the Simulator ......................................................................................... 59
Setting Tone Options ....................................................................................... 60
Setting Navigation Instructions ......................................................................... 60
Viewing Technical GPS Information ................................................................... 60
Setting the GPS Position .................................................................................. 61
Backing Up and Restoring Data ........................................................................ 61
Backing Up Data ............................................................................................. 61
Restoring Data ................................................................................................ 61
Viewing Map Information .................................................................................. 62
Appendix A - POI Categories / Subcategories .........................................................................A-1
Table of Contents
Magellan Maestro 4040
5
Magellan Maestro 4040
The Magellan Maestro 4040 is a vehicle navigation product that utilizes GPS signals from satellites to
calculate your precise location and compute details about its travel. Knowing its position and
movement, it can then overlay this information on detailed maps provided by NAVTEQ® to provide a
visual representation of your location.
With the Magellan Maestro 4040 you can:
•
Store your home address and quickly get routing details to your home.
•
Create and save addresses in your address book that can be accessed at any time and get
routing information to that address.
•
Route to an address that you enter using the keypad and Magellan’s QuickSpell feature for
easy, errorless entry.
•
Route to any point of interest (POI) that has been preloaded into your Magellan Maestro.
(Custom POIs can also be created and uploaded using the POI Manager software supplied
on the included CD-ROM.)
•
Route to a POI that appears on the map while traveling simply by tapping on the POI icon.
•
Route to an intersection by selecting the streets.
•
Use the AAA TourBook® to select a destination and get routing details to travel by. The
AAA TourBook® also includes ratings, discount information for AAA members, hours of
operation, information about the POI and other valuable facts,
•
AAA Roadside Assistance for quick and easy access to information about your location to
assist in getting AAA services to your location.
•
A trip planner to create a trip with multiple destinations. Handy for business people who
need routing information to many destinations.
•
An exit POI tool that provides you with a list of gas stations, restaurants, hotels and auto
repair shops located nearby exits you are approaching that you can route to while traveling
on a freeway.
•
Options that provide means to customize your Magellan Maestro to meet your needs.
The interface for the Magellan Maestro is easy and simple to follow once you understand the basics.
You may never need to refer to this manual but if you do we have tried to present it in a form that you
can access the function you are trying to complete and follow the steps provided.
The Magellan Maestro has a built-in battery so in most cases you will be able to follow these
instructions while reading them on your computer screen without plugging it in to AC power. You
should note that while indoors you may not get any satellite signals so your location information would
not be updated. However, the power of the SiRFstarIII™ chipset installed in the Magellan Maestro
will get satellite signals in some very rough locations so you may notice the Magellan Maestro
computing a position, even indoors.
This document is set up to be printed on 8.5” x 11” (letter) paper should you desire a printed version
for your reference.
Magellan Maestro 4040
1
Front View
A
Microphone
A
4.3
”D
isp
lay
Side Views
A
B
C
D
A
SD/MMC card slot
B
Power on/off
C
USB connector
D
Reset
E
Headphone Jack (3.5mm mini jack)
F
Power input from cigarette lighter
adapter or AC power adapter (+5
VDC / 2A).
E
F
Back View
A
Speaker
A
Magellan Maestro 4040
2
Installation Instructions
Installation of the Magellan Maestro is simple and easy. The hardest part will be picking the best
location.
Selecting the Location
A few tips on selecting the proper location.
•
Mount the Magellan Maestro in a place where it can be easily seen and will not interfere
with your view of the road.
•
The Magellan Maestro should be mounted in such a way that the antenna, (located in the
top of the receiver), has an unobstructed view of the sky through the windshield.
•
Select whether it will be mounted using the adjustable mount to the windshield or the
supplied adhesive disk. Be sure to check your local and regional laws before mounting to
the windshield. Some states, like California and Minnesota, have laws restricting the
mounting of any device on the windshield.
•
If planning to use the adhesive disk, a smooth surface on the dash board will need to be
selected. Do not attach the adhesive disk to the windshield.
•
Make sure that the Magellan Maestro or any cabling will not be disturbed in the event that
the airbags are deployed.
Cleaning the Area
Use the alcohol pad that came with the Magellan Maestro to clean the area on the windshield or dash
that has been selected for mounting the Magellan Maestro.
Applying the Adhesive Disk
(Skip if mounting directly to the windshield.) Remove the protective tape from the back of the
adhesive disk. Apply the disk with the adhesive side towards the dash. Maintain pressure on the disk
for 5 minutes to allow it to set in place. Allow the disk 24 hours to cure before continuing.
Attach the Cradle
Line up the two mounting tabs on the cradle with
the mounting slots on the bottom of the Magellan
Maestro. Press the back of the cradle until it
snaps in place with the back of the receiver.
Please note that the mounting bracket supplied with the Magellan Maestro may be different then the one shown in this
document.
Installation
3
Attach the Adjustable Mount
Line up the two tabs on the adjustable mount with
the holes on the back of the cradle. Once the
adjustable mount is flush with the cradle, push the
cradle and receiver assembly down until they lock
in place with the adjustable mount.
Secure the Mount to the Windshield or Adhesive Disk
Make sure that the lever at the base of the adjustable mount is in the up position. Place the base of
the mount firmly over the area of the windshield to be used or the adhesive disk. Push the lever at
the base of the mount all the way down until it snaps in place. Carefully let go of the assembly,
making sure that it is securely mounted.
Adjust the Mount for Optimum Viewing
Loosen the adjustment locking knobs and position the Magellan Maestro for optimum viewing. Once
set, tighten the locking knobs. (Never attempt to adjust the mount while driving.)
Connecting Power
Plug the end of the cigarette lighter adapter into a
12 VDC cigarette lighter receptacle in the vehicle.
Connect the other end to the Magellan Maestro as
shown. There is a wire catch on the side of the
cradle to run the power cable through to prevent it
from disconnecting. If there is power at the
receptacle, the Magellan Maestro will power on.
(Note: some vehicles apply power to the cigarette
lighter receptacle only when the ignition is on.)
Security
It is recommended that the Magellan Maestro is not left in plain view while unattended for reasons of
theft. The easiest method for removing the Magellan Maestro once the mount is in place is to unsnap
it from the cradle by pressing on the tab at the top of the cradle.
Installation
4
Fundamentals
Powering on the Magellan Maestro
The On/Off button is the silver button located on the left side of the Magellan Maestro as shown in the
Overview chapter.
Turning the Magellan Maestro On
1.
Press and hold the On/Off button for 1-2 seconds.
2.
Read the Warnings and tap OK.
Turning the Magellan Maestro Off
1.
Press and hold the On/Off button for 1-2 seconds.
Selecting Auto-Power Shutdown Time
The Magellan Maestro can be set up to shut down automatically using the time durations you can
select. The receiver will turn off after the selected duration has passed when; A) the position hasn’t
changed and B) the touchscreen hasn’t been pressed.
1.
Access the Main Menu.
2.
Tap the Next arrow to access the Main Menu Page 2.
3.
Tap User Options.
4.
Tap System Settings.
5.
Tap Power.
6.
Select Auto-Power Off time; Never, 10 Minutes, 20 Minutes or 30 Minutes.
7.
Tap Save.
8.
Tap the Back arrow to return to the Main Menu.
Volume
There arre two ways to access the volume controls; one
is tapping the speaker icon on the Map screen and the
other is through User Options.
Changing the Volume from the Map Screen.
1.
Tap the speaker icon
.
2.
Tap on the Mute button to mute the volume or
tap inside the volume adjust bar below the
Mute button to change the volume levels.
3.
Tap
.
If you have the volume muted the speaker icon is displayed with a line through it indicating it is
muted. To unmute, tap the speaker icon again.
Fundamentals
5
Changing the Volume from User Options
1.
Access the Main Menu.
2.
Tap the Next arrow to access the Main Menu Page 2.
3.
Tap User Options.
4.
Tap System Settings.
5.
Tap Volume.
6.
Tap on the Mute button to mute the volume or tap inside the volume adjust bar below the
Mute button to change the volume levels.
7.
Tap
.
Brightness
Accessing the Brightness Control
1.
Access the Main Menu.
2.
Tap the Next arrow to access the Main Menu
Page 2.
3.
Tap User Options.
4.
Tap System Settings.
5.
Tap Brightness.
6.
Tap inside the brightness adjust bar to set the desired brightness.
7.
Tap
.
On the Brightness screen there is a checkbox for “On-battery dimming (75%)” When checked, the
Magellan Maestro will dim to 75% of the brightness when operating exclusively on battery power.
This prolongs the battery life between charges. It can be turned off by tapping on the checkbox.
The Main Menu
The Main Menu screen is the center for all the available functions for the Magellan Maestro. The
Main Menu consists of two pages with large, easy to access icons.
Accessing the Main Menu
From the Map screen tap the Menu button.
From the other screens, tap the Back button.
Fundamentals
6
.Main Menu - Page 1
Show Map: Displays the map with your current position (if computing a position from the GPS
signals) indicated by the blue triangle. See the Map Screen chapter for details.
Enter Address: Displays Enter Address menu. Addresses can be entered by first entering the city, zip
code, or by selecting a city from a list of cities you have already used as destinations. Also provides
access to your address book (my addresses) or to create a route to an intersection. See the chapter on
Routing to an Address for details.
Points of Interest: Displays the Search Points of Interest menu. Search for POIs by entering the
name or by selecting from a list of available categories. The AAA TourBook™ is also accessed from
the Search Points of Interest menu. Additionally, POIs that have been created and installed using the
POI Manager software (found on the CD-ROM) can be accessed from this menu. For more
information on the Search Points of Interest menu, see the Points of Interest chapter.
Home: If you have created a Home address, press the Home button for quick access for routing to
your home. If a Home address has not been created, a prompt is displayed to do so. See the Home
Button chapter for more information.
AAA Roadside Assistance: Displays the AAA Roadside Assistance screen. For more information on
the AAA Roadside Assistance screen, see the chapter on AAA Roadside Assistance.
Bluetooth: Displays the Bluetooth Main Menu screen. For more information on connecting to a
mobile phone, see the chapter on Bluetooth.
Fundamentals
7
.Main Menu - Page 2
Trip Planner: Opens the Trip Planner menu where you can create, edit, delete, rename or activate a
trip.
Exit POI’s: (Accessible only while on a freeway.) Provides a listing of restaurants, gas stations, auto
repair shops or hotels near approaching freeway exits. You can select one of the POIs presented and
create a route to it.
User Options: Accesses the User Options menu. This menu can be used to access functions used to
customize the Magellan Maestro to your personal needs.
Home: If you have created a Home address, press the Home button for quick access for routing to
your home. If a Home address has not been created, a prompt is displayed to do so. See the Home
Button chapter for more information.
AAA Roadside Assistance: Displays the AAA Roadside Assistance screen. For more information on
the AAA Roadside Assistance screen, see the chapter on AAA Roadside Assistance.
Bluetooth: Displays the Bluetooth Main Menu screen. For more information on connecting to a
mobile phone, see the chapter on Bluetooth.
Fundamentals
8
The Keypad
Understanding the keypad while entering an address is an important part of using your Magellan
Maestro. The keypad is the most common means of entering data into the Magellan Maestro, and
with such key features as QuickSpell, makes entering data quick and easy.
Keypad Overview
Special Keys
Alphabetic Keypad
Numeric Keypad
Symbols Keypad
Spacebar
Backspace
Accept
Cancel
Selecting From List
After tapping “OK” to accept your input you may get a
list of items found in the database. The sample here
shows the result of tapping “OK” after entering “LOS
A”. Use the scroll bar to move up and down the list and
tap on the desired item in the list to continue.
Fundamentals
9
QuickSpell™
QuickSpell uses the information in the database to limit the keys that can be pressed to present only
those which can access information in the database.
For example, if you are looking for Los Angeles. As you
‘type’ in the name Los Angeles, only keys that can spell
a city in the database are shown. In the screen to the
right, ‘LOS “ has been entered. Keys that would not
continue to spell a city in the database are grayed out..
This is done to enable the city and street names to be
entered quickly and without any errors due to typos.
Notes on Entering Data
If you are having trouble getting the results you expected here are a few useful tips.
•
Make sure that you have spelled the name correctly. If you are unsure of the spelling, just
enter a few characters and tap “OK”. A long list of names will be displayed but you can
step through the list and probably be able to find the correct spelling.
•
Check for apostrophes. If searching a for Lowe’s Home Improvent Center you need to
enter the apostrophe. Entering ‘LOWES’ without the apostrophe will not display what you
are searching for.
•
When entering a street name you can use the street prefix (N. E. W. S. etc.) to narrow the
search. For example to find N. Main St. you could enter “N. Main” or “N Main”.
•
The more characters you enter, the smaller the list of POIs found will be.
Fundamentals
10
Map Screen
The most commonly used screen will be the Map screen. Whether on a route or just travelling around
town, chances are the Map screen will be displayed. There are two unique modes that the Map
screen can be displayed in; normal and routing.
In normal mode, your position is shown on the map along with the time and your speed. As you
travel, your position will be updated, giving you a clear view of your position and surrounding streets.
A
B
K
C
J
D
I
E
F
G
H
Map Screen - Normal Mode
A
Street name currently on.
B
Direction indicator. Tap to view the Current Location screen where you can save your
position into your Address Book.
C
Zoom out
D
POI icon. Sample shown here is for a gas station. Tap on the POI icon to create a route to
that POI. Note: If there are multiple POIs in the same area, a list of those POIs will be
displayed. Tap on the name in the list to access the routing function.
E
Current position icon
F
Time of day
G
Main Menu button. Tap to display the Main Menu.
H
Current speed of travel
I
Volume control. Tap to display the Volume Setting screen where the loudness can be
adjusted or muted. (If the volume has been muted, tapping this button unmutes the volume
without displaying the Volume Setting screen.)
J
Zoom in
K
Satellite Status. All four bars in green in optimal. Tap to display the GPS Status screen.
Map Screen
11
In routing mode additional information is displayed providing detailed information about the route
you’ve selected.
A
B
N
C
M
D
L
E
K
J
F
G
H
I
Map Screen - Routing Mode
A
Street name currently on.
B
Direction indicator. Tap to view the Current Location screen where you can save your
position into your Address Book.
C
Zoom out
D
POI icon. Sample shown here is for a gas station. Tap on the POI icon to create a route to
that POI. Note: If there are multiple POIs in the same area, a list of those POIs will be
displayed. Tap on the name in the list to access the routing function.
E
Current position icon
F
Next maneuver icon. Tap on the icon to display the Maneuver List screen.
G
Distance to next maneuver. Tap to repeat the last voice command.
H
Main Menu button. Tap to go to the Main Menu screen. Note that the Main Menu screen is
different when there is an active route. See the chapter on Routing for details.
I
Tap to toggle between distance remaining to reach destination and approximately how long
it will take to arrive at the destination.
J
Street name for the next maneuver
K
Graphical representation of the route
L
Volume control. Tap to display the Volume Setting screen where the loudness can be
adjusted or muted. (If the volume has been muted, tapping this button unmutes the volume
without displaying the Volume Setting screen.)
M
Zoom in
N
Satellite Status. All four bars in green in optimal. Tap to display the GPS Status screen.
Map Screen
12
Accessing the Map Screen
1.
On the Main Menu, tap Show Map.
2D Mode
The map is normally displayed in 3D mode but you
can set the map to 2D mode if so desired. Choose
the mode that is best suited for you.
In 2D mode, you can pan across the map looking for
a location to route to or save in your address book.
Setting the Map Modes (2D or 3D)
1.
From the Map screen, tap MENU.
2.
Tap the Next arrow to access page 2 of the
Main Menu.
3.
Tap User Options.
4.
Tap Map Options.
5.
Tap 3D Map or 2D Map.
6.
Tap Save.
Map Screen in 2D Mode
Panning on the Map
1.
While viewing the Map screen in 2D mode, slide your finger or stylus across the map.
2.
The location icon changes to
. (The circle is the crosshairs for a position and the red
arrow points to your current location.
3.
To exit panning, tap
and the map is returned to your current position.
Saving a Position While Panning
1.
Pan the map until the icon crosshairs are over the location you want to save to your address
book. (Must be a position that is does not have a POI icon displayed.)
2.
Tap in the center of the icon circle. (If nothing happens then you are not zoomed in enough.
Tap the zoom in icon and try again.)
3.
On the Route To This Address? screen, tap
4.
Edit Information:
Tap
on the Edit Name line to create a name for this location.
Tap on any of the three (work, home, mobile) phone buttons to enter a phone number.
Tap
on the Edit Information line to add additional information. (Up to 35
characters can be entered.)
5.
If you want to tag this location as one of your favorites, tap on the “Favorite” check box.
Map Screen
.
13
6.
When the details for this address are acceptable, tap
7.
If you want to now route to this address tap
8.
Tap
.
or if you are done tap
.
to exit panning and return the icon to your current position.
Routing to a Panned Position
1.
Pan the map until the icon crosshairs are over the location you want to route to.
2.
Tap in the center of the icon circle. (If nothing happens then you are not zoomed in enough.
Tap the zoom in icon and try again.)
3.
On the Route To This Address? screen, tap
4.
Select the routing method desired and tap the Calculate Route
,
button.
Current Location Screen
This screen is accessed from the Map screen whether
you are on a route or just normal driving.
The Current Location screen displays approximate
address information, the next and previous cross
streets, as well as your latitude/longitude. To the
right is a compass point in your direction of travel,
calculated elevation, and speed. The bottom bar
displays the current time and date.
Accessing the Current Location Screen
1.
From the Map screen, tap the direction icon in the upper left corner.
Saving Your Current Location to Your Address Book
1.
Access the Current Location screen.
2.
Tap
3.
Edit Information:
Tap
on the Edit Name line to
create a name for this location.
Tap on any of the three (work, home,
mobile) phone buttons to enter a phone
number.
Tap
on the Edit Information line
to add additional information. (Up to 35
characters can be entered.)
Saving Current Location
4.
If you want to tag this location as one of your favorites, tap on the “Favorite” check box.
5.
When the details for this address are acceptable, tap
Map Screen
.
14
Maneuver List Screen
This screen is accessed from the Map screen and
only when routing. (Note: The Maneuver List screen
is not available until you begin moving on the route.)
Each line in the maneuver list provides details about
the maneuver in the order that they are to be made,
with the next maneuver at the top.
The bottom bar of the Maneuver List indicates the
distance and time to the next maneuver as well as
the total distance computed for the route.
The Maneuver List can be modified if you want to
exclude one of the maneuvers should you want to
avoid travelling one of the streets listed. Instructions
to exclude one of the maneuvers is described in this
chapter.
Maneuver List
The maneuver highlighted indicates that you
will be instructed to make a right turn in 0.5
miles on N. Marengo Ave.
Accessing the Maneuver List
1.
Tap the maneuver icon in the lower left corner of the Map screen. This icon is displayed only
while on an active route.
Excluding a Maneuver
This is used to modify the route to possibly avoid routing on a particular street.
1.
Access the Maneuver List.
2.
Tap on the item in the list with the street
you want to try and avoid.
3.
Confirm the exclusion by tapping on
. (Tap the back arrow to cancel.)
4.
The Magellan Maestro recalculates the
route and displays the Maneuver List with
the newly computed maneuvers.
In this example, Exit-45/Santa Ana/CA-57 is
to be excluded from the route.
The Maneuver List displays the new route.
Map Screen
15
GPS Status Screen
1.
The GPS Status screen is also accessed
from the Map screen and displays the
status of the GPS satellites in a graphical
format. (More technical information on the
GPS status can be found in under the User
Options menu: Main Menu Page 2 > User
Options > GPS Options > GPS Status.)
Green bars indicate that the Magellan Maestro is
using these satellites to compute the position; orange
bars indicate that the Magellan Maestro is trying to
lock on to the satellite signal; and no bar shown
indicates a satellite that is not being tracked. The
longer the bars, the better the signal.
GPS Status Screen
Accessing the GPS Status Screen
1.
From the Map screen, tap the GPS Signal Strength icon in the upper right corner.
Tap on the back arrow to return to the Map screen.
Zoom Levels
There are 23 zoom levels in the Magellan Maestro, ranging from 100 feet to 1200 miles. Select the
zoom level that best suits your needs.
Setting Zoom Levels
1.
While viewing the Map screen, tap on the
(zoom in) or
(zoom out).
Volume
The volume can be adjusted or muted from the Map screen. (The volume can also be adjusted from
User Options > System Settings > Volume.)
Changing the Volume from the Map Screen.
1.
Tap the speaker icon
.
2.
Tap on the Mute button to mute the volume or tap inside the volume adjust bar below the
Mute button to change the volume levels.
3.
Tap
.
If you have the volume muted the speaker icon is displayed with a line through it indicating it is
muted. To unmute, tap the speaker icon again.
Map Screen
16
Home Address
Your home address can be entered and saved in the Magellan Maestro for quick and easy access when
you need to create a route home.
Creating a Home Address
These instructions only apply if you have never entered a home address or if it has been deleted.
1.
Tap the Home Address icon
on the Main Menu screen.
2.
Confirm “Do you want to enter your HOME address?” Tap Yes.
3.
Follow the prompts to enter the address to be used as your HOME address.
4.
When the Address screen is displayed, edit the
information and top SAVE to continue.
5.
The HOME address is saved in your address book
and you are returned to the Main Menu screen.
Creating a Route to the Home Address
1.
Tap the Home Address icon
on the Main Menu screen.
2.
Tap Route.
3.
Select the Route Method desired and tap the
orange Calculate Route button.
Changing the Home Address
1.
Tap the Home Address icon
2.
Tap Change.
3.
Confirm “Do you want to replace the HOME address with a new address?” Tap Yes.
4.
Follow the prompts to enter the address to be used as your new HOME address.
Home Address
on the Main Menu screen.
17
5.
When the Address screen is displayed, edit the
information and top SAVE to continue.
6.
The new HOME address is saved in your address
book and you are returned to the Main Menu
screen.
Accessing the Home Address from the Address Book
1.
From the Main Menu, tap the Enter Address icon.
2.
Tap the my addresses icon.
3.
Tap Address Book.
4.
Tap List All.
5.
The list of addresses in your address book are
displayed with the home icon on the line of your
HOME address.
6.
Tap on the home item in the list to create a route,
edit or delete the HOME address.
Home Address
18
Enter Address
The Enter Address function is used to create a route from a newly entered address, an address in your
address book or to an intersection of two streets.
Entering an Address
While creating an address the first step is to indicate what city the address is in. This can be done by
inputting the name of the city, entering the zip code for the city or by selecting a city that has been
previously used.
Creating a Route to a New Address
1.
From the Main Menu, tap the Enter Address icon.
2.
Select the method to enter the city: Enter City, Enter Zip Code, or Previous City.
Enter City:
Use the keypad with QuickSpell to enter the
first few characters of the city name. Tap
OK or continue entering letters until the
display automatically switches to the list of
cities found.
Tap on the desired city in the list.
List of Cities
Enter Zip Code:
Use the keypad the zip code for the city.
Tap OK when the zip code is complete.
Tap on the desired city in the list.
Cities with the Zip Code Entered
Previous City:
Tap on the desired city in the list.
List of Cities Previously Used
Enter Address
19
3.
With the city selected, the keypad will be displayed asking for the street name. Use the
keypad with QuickSpell to enter the street name. Enter the first few characters of the street
name and tap OK or continue entering characters until the list of streets is displayed. You
can use street prefixes (N, E, W, S, etc.) if desired.
Samples the city Pasadena, California:
Entering “ALLE” results in:
Entering “N A” or “N. A” results in:
Enter Address
However, typing in “NOR” can give some
unexpected results if you are trying to type
in the word “NORTH ALLEN”.:
Entering “NOR”
To resolve this, use the back arrow from the
street list and continue typing in the word
NORTH. Now all streets beginning with
“North” as well as streets with the north
prefix are displayed.
Entering “NORTH”
20
4.
Use the scroll bars to the right if necessary to view the name of the street desired. Tap on
the street name to continue.
5.
Use the keypad to enter the street number
for the address. Note in the top left corner
is the range of acceptable street numbers.
6.
Tap Done when the address is complete.
7.
Select the desired route method and tap the
orange Calculate Route button to begin
routing.
My Addresses
My Addresses is where you store addresses that you want to keep as future destinations as well as
access addresses that you have gone to recently that may not be in your address book. The address
book can hold up to 200 addresses (50 of those being marked as favorites).
Accessing the My Addresses Menu
1.
From the Main Menu, tap the Enter Address icon.
2.
Tap on the my addresses icon.
3.
The My Addresses Menu is displayed.
Previous Destinations
Routing to a Previous Destination
1.
From the Main Menu, tap the Enter Address icon.
2.
Tap on the my addresses icon.
3.
Tap on Previous Destinations.
4.
Select the destination from the list of previous destinations.
5.
Tap on Route.
6.
Select the Route Method and tap the orange Calculate Route button.
Enter Address
21
Saving a Previous Destination to Your Address Book
1.
From the Main Menu, tap the Enter Address icon.
2.
Tap on the my addresses icon.
3.
Tap on Previous Destinations.
4.
Select the destination from the list of previous destinations.
5.
Tap on Edit.
6.
Apply any edits you want to make to this destination before saving.
7.
Check Favorite if you want this addresses store in your address book as a Favorite.
8.
Tap Save to store the address.
9.
The Previous Destination screen is displayed. Tap Route to route to this destination or the
Back arrow to return to the list of previous destinations.
Deleting a Previous Destination
1.
From the Main Menu, tap the Enter Address icon.
2.
Tap on the my addresses icon.
3.
Tap on Previous Destinations.
4.
Select the destination from the list of previous destinations.
5.
Tap on Delete.
6.
Confirm Deletion. Tap Yes.
7.
The Enter Address Menu will be displayed.
It is possible to delete all of the destinations in the Previous Destination List by accessing User
Options > Address Book Options > Clear Previous.
Address Book
Accessing an Address in Your Address Book
1.
From the Main Menu, tap the Enter Address icon.
2.
Tap on the my addresses icon.
3.
Tap on Address Book
Enter Address
22
4.
Tap List All to view the entire contents of your address book or tap on Search Address Book
to search for entries by searching on the name.
5.
From the list of addresses found, tap on the address record desired.
Routing to an Address in Your Address Book
1.
Access the address record from your address book as described in Accessing an Address in
Your Address Book.
2.
Tap on Route.
3.
Select the Route Method and tap on the orange Calculate Route button to continue.
Editing an Address in Your Address Book.
1.
Access the address record from your address book as described in Accessing an Address in
Your Address Book.
2.
Tap on Edit.
3.
Use the Edit Address Book screen to modify the name, information or phone numbers. The
street address cannot be changed.
4.
Tap Save when done.
Deleting an Address in Your Address Book.
1.
Access the address record from your address book as described in Accessing an Address in
Your Address Book.
2.
Tap on Delete.
3.
Confirm deletion. Tap Yes.
4.
You are returned to the list of addresses in your address book. If the list is now empty, you
are returned to the previous screen.
Favorites
Favorite addresses operate the same as other addresses in your address book. Addresses in your
address book can be marked as favorites to speed up the search for commonly used addresses.
Accessing an Address from Favorites
1.
From the Main Menu, tap the Enter Address icon.
2.
Tap on the my addresses icon.
3.
Tap on Favorites
4.
From the list of addresses found, tap on the address record desired.
Enter Address
23
Routing to an Address from Your Favorites List
1.
Access the address record from your Favoites as described in Accessing an Address from
Favorites.
2.
Tap on Route.
3.
Select the Route Method and tap on the orange Calculate Route button to continue.
Editing an Address from Your Favorites List
1.
Access the address record from your Favoites as described in Accessing an Address from
Favorites.
2.
Tap on Edit.
3.
Use the Edit Address Book screen to modify the name, information or phone numbers. The
street address cannot be changed.
4.
Tap Save when done.
Deleting an Address from Your Favorites List
1.
Access the address record from your Favoites as described in Accessing an Address from
Favorites.
2.
Tap on Delete.
3.
Confirm deletion. Tap Yes.
Creating a New Entry
This is used to create a new address and save it in your address book. You can create an entry by
selecting it on the map, entering the address, selecting an address from the list of POIs or choosing a
street intersection.
Creating a New Entry to You Address Book by Selecting on the Map
1.
From the Main Menu, tap the Enter Address icon.
2.
Tap on the my addresses icon.
3.
Tap on Create New Entry.
4.
Tap on Select on Map.
5.
The Map screen is displayed in 2D mode. Use your finger or stylus to pan around the map.
When the crosshair icon is over the location you want to add to your address book, tap in the
center of the crosshairs. (Note: you may need to zoom into a lower zoom level if the edit
Address Book screen is not displayed.)
6.
Edit the name, information and phone numbers for the location you selected on the map.
Tap the Favorites checkbox if you want this saved as a favorite address.
7.
Tap Save.
Enter Address
24
Creating a New Entry to You Address Book by Entering an Address
1.
From the Main Menu, tap the Enter Address icon.
2.
Tap on the my addresses icon.
3.
Tap on Create New Entry.
4.
Tap on Enter Address.
5.
Enter the address following the prompts. Detail on address entry can be found in this
chapter in the Entering an Address section,
6.
Edit the name, information and phone numbers for the location you selected on the map.
Tap the Favorites checkbox if you want this saved as a favorite address.
7.
Tap Save.
Creating a New Entry to You Address Book from a POI
1.
From the Main Menu, tap the Enter Address icon.
2.
Tap on the my addresses icon.
3.
Tap on Create New Entry.
4.
Tap on POIs.
5.
Select the category from the list of POI categories.
6.
If a subcategory list is displayed, select ALL Subcategories or one from the list.
7.
Select search criteria:
Near Current Position Displays POIs in the category selected nearest to your current
position. If no POIs are within a 100 mile radius, the search is empty and an alert
displayed.
Near City: Enter a city name using the keypad (no QuickSpell) and select the city center
desired from the resulting list. This will display POIs in the category selected nearest to the
city center selected.(
Near Address: Enter an address using the standard address entry function. This will display
POIs in the category selected nearest to the address entered.
8.
Tap on the POI name desired from the list. Use the Prev and Next buttons to scroll up and
down the list.(
9.
Edit the name, information and phone numbers for the POI selected. Tap the Favorites
checkbox if you want this saved as a favorite address.
10. Tap Save.
Enter Address
25
Creating a New Entry to You Address Book from by Intersections
1.
From the Main Menu, tap the Enter Address icon.
2.
Tap on the my addresses icon.
3.
Tap on Create New Entry.
4.
Tap on Intersection.
5.
Select the city that the intersection is located in by entering the city name, entering the zip
code or selecting from the previous cities list.
6.
Search for the first street by spelling out the street name following the guidelines presented
in Entering an Address. Tap on the street from the list of streets.
7.
Search for the second street the same as in step 6. However, the Magellan Maestro uses
QuickSpell to allow you to select only streets that intersect with the street selected in step
6. Tap on the intersecting street from the list of streets.
8.
Edit the name, information and phone numbers for the POI selected. Tap the Favorites
checkbox if you want this saved as a favorite address.
9.
Tap Save.
Intersection
Creating a Route to Two Intersecting Streets
1.
From the Main Menu, tap the Enter Address icon.
2.
Tap on the intersection icon.
3.
Select the city that the intersection is located in by entering the city name, entering the zip
code or selecting from the previous cities list.
4.
Search for the first street by spelling out the street name following the guidelines presented
in Entering an Address. Tap on the street from the list of streets.
5.
Search for the second street the same as in step 6. However, the Magellan Maestro uses
QuickSpell to allow you to select only streets that intersect with the street selected in step
6. Tap on the intersecting street from the list of streets.
6.
Select the Route Method and tap on the orange Calculate Route button.
Enter Address
26
Points of Interest (POI)
The Magellan Maestro has POIs preloaded that can be used as a destination for a route. Selecting a
restaurant or finding an ATM nearby is at your fingertips.
Categories and Subcategories
POIs are categorized into unique categories from gas stations to wineries. Most, but not all categories
are further organized into subcategories. Restaurants have, for example, 54 subcategories that
provide a way to search for restaurants serving Chinese food, or fast food, and even Swiss food.
Creating a Route to a POI by Category
1.
From the Main Menu, tap the Enter Address icon.
2.
Select Search by Category.
3.
Use the scroll bars to view the categories
and tap on the desired category name.
Category List
4.
If a subcategory is displayed, use the the
scroll bars to view the subcategories and
tap on the desired subcategory name.
Select ALL SUBCATEGORIES if you are
unsure what subcategory best suits your
needs.
5.
Select the search criteria: Near Current
Position, Near City (requires entering a city
name) or Near Address (requires entering
an address).
6.
The top portion of the display shows
detailed information about the highlighted
POI in the list. The arrow and distance
indicates the direction and distance in a
straight line from your current position to
the POI.
Use the Prev and Next buttons to step up
and down the list of POIs found. Tap on the
POI name to continue.
7.
Select the route method and tap on the
orange Calculate Route button to begin.
Points of Interest
Shopping Sub Category List
Department Stores Near Current Position
27
Creating a Route to a POI by Name
1.
From the Main Menu, tap the Enter Address icon.
2.
Select Search by Name.
3.
Spell the name of the POI to be used as the
destination. You need not enter the full
name, but the more characters you enter,
the easier it will be to find the exact POI
you are searching for.
4.
Select the search criteria: Near Current
Position, Near City (requires entering a city
name) or Near Address (requires entering
an address).
Sample Search by Name Input
5.
The top portion of the display shows
detailed information about the highlighted
POI in the list. The arrow and distance
indicates the direction and distance in a
straight line from your current position to
the POI.
Not that searching by name will show all
POIs that meet the name criteria,
regardless of category. In the sample
shown here, there are home improvement
Search Result for LOWE Near Position
centers (Lowe’s) and parks (Lowell Brandt
Park).
Use the Prev and Next buttons to step up and down the list of POIs found. Tap on the POI
name to continue.
6.
Select the route method and tap on the orange Calculate Route button to begin.
Enhanced POIs
Enhanced POIs are points of interest that are user-created using the POI Manager software found on
the CD-ROM. After loading a POI file to an SD / MMC card and loading it in the Magellan Maestro,
you can route to those POIs quickly.
Loading a POI File
1.
Save a POI file created with the POI Manager to an SD/MMC card and install the card in the
SD/MMC slot on the left side of the Magellan Maestro.
2.
From the Main Menu, tap the Enter Address icon.
3.
Select Enhanced.
4.
Select My POI.
Points of Interest
28
5.
Select Change My POI File.
6.
Select Select a POI File.
7.
Select the POI file to be loaded from the list
of available POI files by tapping on the file
name.
POI File List
Selecting Categories for Display on the Map
A POI file must be loaded (see Loading a POI File) for this function to operate.
1.
From the Main Menu, tap the Enter Address icon.
2.
Select Enhanced.
3.
Select My POI.
4.
Select Change My POI FIle.
5.
Select Display Categories.
6.
Use the checkbox to the left of the category
name to select or deselect the category.
(Checked means this category will have its
icon displayed on the map.)
Tap Mark All to check all categories or Clear
All to uncheck all categories.
7.
Tap Save when done.
Enhanced POI Category List
Setting Alarms
A POI file must be loaded (see Loading a POI File) for this function to operate.An enhanced POI can
have an alarm that will alert you when you are in range set by “Alert Parameters.” Note that all
POIs in the categories selected will have their alarms set to on. A POI file must be loaded (see
Loading a POI File) for this function to operate.
1.
From the Main Menu, tap the Enter Address icon.
2.
Select Enhanced.
3.
Select My POI.
Points of Interest
29
4.
Select Change My POI FIle.
5.
Select Set Alarms.
6.
Use the checkbox to the left of the category name to select or deselect the category.
(Checked means this category will have its alarms turned on.)
Tap Mark All to check all categories or Clear All to uncheck all categories.
7.
Tap Save when done.
Setting Alarm Parameters
An enhanced POI can have an alarm that will alert you when you are in range set by “Alert
Parameters.” Note that all POIs in the categories selected will have their alarms set to on. A POI
file must be loaded (see Loading a POI File) for this function to operate.
1.
From the Main Menu, tap the Enter Address icon.
2.
Select Enhanced.
3.
Select My POI.
4.
Select Change My POI FIle.
5.
Select Set Alarms.
6.
Select the category from the category list whose alarm parameters are to be changed.
7.
Set the detection angle, the first warning and the last warning by tapping on the button with
the current setting.
8.
Use the keypad to enter in new values and tap OK.
9.
Tap Save when done.
Routing to an Enhanced POI
A POI file must be loaded (see Loading a POI File) for this function to operate.
1.
From the Main Menu, tap the Enter Address icon.
2.
Select Enhanced.
3.
Select My POI.
4.
Select Select Category.
5.
Select the category containing the POI you want to route to from the category list.
6.
Select Nearest (near your current position) or Spell POI Name (requires entering the POI
name).
7.
Select the POI to be routed to from the “Select POI” list.
Points of Interest
30
8.
Tap Route.
9.
Select the routing method desired and tap the orange Calculate Route button to continue.
Saving an Enhanced POI to Your Address Book
A POI file must be loaded (see Loading a POI File) for this function to operate.
1.
From the Main Menu, tap the Enter Address icon.
2.
Select Enhanced.
3.
Select My POI.
4.
Select Select Category.
5.
Select the category containing the POI you want to route to from the category list.
6.
Select Nearest (near your current position) or Spell POI Name (requires entering the POI
name).
7.
Select the POI to be routed to from the “Select POI” list.
8.
Tap Save.
9.
Edit the POI information and tap Save.
10. The Route To This POI screen is displayed again. Tap on Route to create a route or Cancel to
quit.
AAA TourBook®
The AAA TourBook® is a special feature of the Magellan Maestro that gives users access to a special
set of POIs from the AAA TourBook®. Please see the chapter on the AAA TourBook® for complete
details.
Points of Interest
31
AAA TourBook®
Overview
AAA TourBook® travel information can help make your trip safe, easy and hassle-free. As a AAA
member, Magellan Maestro offers you the exclusive advantage of discount listings wherever your AAA
membership card is accepted.
AAA TourBook®
The first step is to select the AAA TourBook® Menu. From this menu, you can access information
and directions for the following.
•
AAA Approved/Diamond Rated accommodations and restaurants, and AAA recommended
destinations, attactions and events.
•
Businesses that participate in the AAA Show Your Card & Save® program.
•
AAA-approved auto repair facilities.
•
AAA branch offices.
•
AAA-rated campgrounds.
Accessing the AAA TourBook®
1
From the Main Menu, tap Points of Interest.
2
Tap the AAA TourBook® button.
3
The AAA TourBook® Menu is displayed as
shown here.
AAA TourBook® Menu
Canadian TourBook® Guides and Roadside Assistance is provided by the Canadian Automobile
Association (CAA), an affiliate of AAA.
AAA TourBook®
32
AAA TourBook® Information
Search the AAA TourBook® for information on accommodations, restaurants, destinations, attractions
and events. Once selected, use the Route button to tell the Magellan Maestro to navigate you to that
point of interest.
Getting AAA TourBook® Information
1
Access the AAA TourBook® Menu.
2
Tap on AAA TourBook® Information.
3
Tap on Accommodations, Restaurants,
Destinations, Attractions, or Events.
4
Select the search criteria: Near Current
Position, Near City, Near Address, or Spell
Name. Follow the instructions for entering
the information needed.
5
AAA TourBook® Information Menu
Use the
and
to scroll
®
through the list of AAA TourBook entries.
The information at the top of the display
provides you with:
• an arrow indicating the direction of
the POI,
• the distance (as the crow flies) to the
POI,
• the address,
• AAA’s rating for the highlighted POI, and
• the phone number.
6
Sample Restaurant List
Tap on the POI in the list to get more
information.
The tabs along the top spotlight the
information that has been recorded for this
location. Description, Hours of Operation,
Parking/Credit Cards are just a few of the
tabs that may be presented. The arrows to
the right of the tabs help you step though
the tabs that cannot fit on the display.
Additional Information
Routing To the Selected POI
1
Once the POI has been selected and the additional information is displayed (as described
above), tap the
2
button.
Select the method you want the route to be calculated and press the calculate route button
to begin. (For more information on routing methods see the Route chapter of this manual.)
AAA TourBook®
33
Show Your Card & Save®
Search for businesses that offer discounts for AAA members with the Show Your Card & Save®
program. Once selected, use the Route button to tell the Magellan Maestro to navigate you to that
point of interest.
Getting Show Your Card & Save® Information
1
Access the AAA TourBook® Menu.
2
Tap on Show Your Card & Save®.
3
Tap on Accommodations/Travel,
Restaurants, Attractions, Automotive,
Shopping or Healthcare.
4
Select the search criteria: Near Current
Position, Near City, Near Address, or Spell
Name. Follow the instructions for entering
the information needed.
5
Show Your Card & Save Menu
Use the
and
to scroll
through the list of AAA Show Your Card &
Save® entries.
The information at the top of the display
provides you with:
• an arrow indicating the direction of
the POI,
• the distance (as the crow flies) to the
POI,
Sample Attraction List
• the address,
• SAVE icon indicating that this is a Show Your Card & Save® business, and
• the phone number.
6
Tap on the POI in the list to get more
information.
The tabs along the top spotlight the
information that has been recorded for this
location. Method of Business, Offer Type,
and Service Description are just a few of
the tabs that may be presented. The arrows
to the right of the tabs help you step though
the tabs that cannot fit on the display.
Additional Information
Routing to the Selected POI
1
Once the POI has been selected and the additional information is displayed (as described
above), tap the
2
button.
Select the method you want the route to be calculated and press the calculate route button
to begin. (For more information on routing methods, see the Route chapter of this manual.)
AAA TourBook®
34
Approved Automotive Repairs
Search for AAA-approved automotive repair facilities for detailed information on hours of operation as
well as services offered. Once selected, the Magellan Maestro can provide you with routing
instructions.
Getting Approved Automotive Repair Information
1
Access the AAA TourBook® Menu.
2
Tap on Approved Automotive Repair.
3
Select the search criteria: Near Current Position, Near City, Near Address, or Spell Name.
Follow the instructions for entering the information needed.
4
Use the
and
to scroll
through the list of AAA-approved
automotive repair facilities.
The information at the top of the display
provides you with:
• an arrow indicating the direction of
the automotive facility,
• the distance (as the crow flies) to the
automotive facility,
• the address, and
• the phone number.
5
Sample Approved Auto Repair List
Tap on a automotive facility in the list to get
more information.
The tabs along the top spotlight the
information that has been recorded for this
location. Hours of Operation and Services
Offered tabs may be presented. The arrows
to the right of the tabs help you step though
the tabs that cannot fit on the display.
Routing to the Selected Automotive Facility
1
Additional Automotive Repair Information
Once the automotive facility has been
selected and the additional information is displayed (as described above), tap the
button.
2
Select the method you want the route to be calculated and press the calculate route button
to begin. (For more information on routing methods see the Route chapter of this manual.)
AAA TourBook®
35
AAA Branch Offices
Search for AAA branch offices with information on hours of operation and services offered. Once
selected, use the Route button to tell the Magellan Maestro to navigate you to that AAA branch office.
Getting AAA Branch Office Information
1
Access the AAA TourBook® Menu.
2
Tap on AAA Branch Offices.
3
Select the search criteria: Near Current Position, Near City, Near Address, or Spell Name.
Follow the instructions for entering the information needed.
4
Use the
and
to scroll
through the list of AAA branch offices.
The information at the top of the display
provides you with:
• an arrow indicating the direction of
the branch office,
• the distance (as the crow flies) to the
AAA branch office,
• the address, and
• the phone number.
5
Sample Branch Office List
Tap on the AAA branch office in the list to
get more information.
The tabs along the top spotlight the
information that has been recorded for this
location. Hours of Operation and Services
Offered can be viewed by tapping the
appropriate tab.
Routing to the Selected AAA Branch Office
1
Once the branch office has been selected
and the additional information is displayed
(as described above), tap the
2
Additional AAA Branch Office Information
button.
Select the method you want the route to be calculated and press the calculate route button
to begin. (For more information on routing methods see the Route chapter of this manual.)
AAA TourBook®
36
Campgrounds
Search for campgrounds that have been rated by AAA. Once selected, use the Route button to tell the
Magellan Maestro to navigate there.
Getting Campground Information
1
Access the AAA TourBook® Menu.
2
Tap on Campgrounds.
3
Select the search criteria: Near Current Position, Near City, Near Address, or Spell Name.
Follow the instructions for entering the information needed.
4
Use the
and
to scroll
through the list of campgrounds.
The information at the top of the display
provides you with:
• an arrow indicating the direction of
the campground,
• the distance (as the crow flies) to the
campground,
Sample Restaurant List
• the address,
• AAA’s rating and Show Your Card &
Save® icon if applicable, for the highlighted campground, and
• the phone number.
5
Tap on the campground in the list to get
more information.
The tabs along the top spotlight the
information that has been recorded for this
location. Facility/Sites, Activities/Services,
and Terms/Restrictions information is
accessible by tapping on the tab. The
arrows to the right of the tabs help you step
though the tabs that cannot fit on the
display.
Additional Information
Routing To the Selected Campground
1
Once the campground has been selected and the additional information is displayed (as
described above), tap the
2
button.
Select the method you want the route to be calculated and press the calculate route button
to begin. (For more information on routing methods see the Route chapter of this manual.)
AAA TourBook®
37
Travelling on a Route
Map Screen
When a route has been calculated it will be displayed
on the Map screen in green with blue arrows
indicating direction of travel. The top of the screen
displays the name of the street you are on. The
bottom provides information about the next
maneuver needed.
The sample to the right shows that the next
maneuver will be to merge in 0.1 miles on CA-57 S.
The total distance to your destination is 3.4 miles.
As the route progresses, voice alerts will be used to
prompt you of upcoming maneuvers. If you miss a
prompt, or want it repeated, tap on the ‘next
maneuver in xxx mi.” data field.
Map Screen with Route Shown
There is also a bell that will alert you where the maneuver is to be performed. (This tone can be
changed in User Options > Tone Options.)
Split-Screen
As a maneuver is approached, the Magellan Maestro
displays a split-screen alerting you of the upcoming
maneuver. This screen will close automatically as the
maneuver gets closer or you can tap ESC to close this
screen and return to the Map screen. (This screen
can be set to not display in User Options > Map
Options.)
Split-Screen
Maneuver List
The Maneuver List displays all of the maneuvers
needed to be made to complete the route and arrive
at the destination. To view the Maneuver List, tap on
the maneuver icon in the bottom left corner of the
Map screen. (The Maneuver List is described in
detail in the Map chapter of this manual.)
Maneuver List
Travelling on a Route
38
You Have Arrived
Finally, the Magellan Maestro will provide a visual
alert when you have arrived at the destination. Tap
the Back arrow to return to the Map screen. (The
Magellan Maestro will automatically return to the
Map screen after a fixed time if you do not tap the
Back arrow.)
You Have Arrived.
Types of Routes
There are a wide variety of ways to create a route and each of them are discussed in the chapter that
they are associated with. Some of the more common methods and the chapter they are described
are:
•
A route to a new address (Street Address)
•
A route to an address in your address book (Street Address)
•
A route to a street intersection (Street Address)
•
A route to a POI preloaded in the Magellan Maestro (Points of Interest)
•
A route to a POI found in the AAA TourBook® (AAA TourBook®)
•
A trip (a route with multiple destinations) (Trip Planner)
•
A route to your home address (Home Address)
Route Method
Regardless of which route type has been created, the
Magellan Maestro needs to know how the route is to
be calculated. Routes can be calculated by Fastest
Time, Shortest Distance, Least Use of Freeways or
Most Use of Freeways. To select the route method,
tap on the radio button for the desired method.
The Magellan Maestro can be set to avoid toll roads
as much as possible by tapping on the Avoid Toll
Roads checkbox.
The View on Map
button displays the Map
screen with the destination shown. Tap on ESC to
return to the Route Method screen.
Route Method
When the route method has been selected and you are ready to begin calculating
the route, tap on the Route Calculate button.
Route Calculate button
Travelling on a Route
39
Special Routing Functions
When a route is active, the Main Menu functions are changed to support special routing functions.
Routing to a POI Near an Approaching Freeway Exit
Note: This function is available only while on a freeway. Also, when you create a route to a POI near
an exit, the original route will be canceled. You will need to reset the original route when you are
ready to continue.
1.
From the Map screen, tap MENU.
2.
Tap the Exit POIs icon.
3.
Tap on the POI icon (restaurant, gas station,
auto repair or hotel) for the exit required.
4.
A list of POIs in the category selected that
are near the exit chosen will be displayed.
5.
Tap on the POI in the list that you want
routing directions to.
6.
Select the Route Method and tap the
orange Calculating Route button.
Exit POI List
Cancelling a Route
1.
From the Map screen, tap MENU.
2.
Tap the Cancel Route icon.
3.
Confirm cancelling of the route. Tap Yes.
Detouring off a Route
1.
From the Map screen, tap MENU.
2.
Tap the Detour icon.
3.
Select the distance to avoid (3 mi., 5 mi., 10 mi. or Custom) that will be used to calculate
the route will then put you back on the orginal route.
4.
Tap Route.
5.
The detour will be calculated using the same routing method used to create the route.
Travelling on a Route
40
Changing the Route Method
If you travel off the computed route, the Magellan Maestro will automatically re-calculate the
routing information to get you to your original destination using the routing method you selected
when creating the route. However, if you want to change the routing method (while on or off the
route), you will need to use the re-route function.
1.
From the Map screen, tap MENU.
2.
Tap the Reroute icon.
3.
Select the desired routing method and tap the orange Calculate Route button.
Travelling on a Route
41
AAA Roadside Assistance
Overview
This screen contains all of the information you will need to provide AAA Roadside Assistance
emergency services to your pinpoint location and speed up your service. AAA members will
appreciate having the AAA toll-free number and their AAA membership number at their fingertips.
The AAA Roadside Assistance Screen
AAA National
Roadside Assistance
Toll-Free Phone
Number
AAA Enrollment Phone
Number with special
benefits for Magellan
Maestro owners.
Current street or
highway.
Current city.
Next and previous exit or
intersection for your
current location.
Your AAA
Membership Number
for easy reference.
Latitude and longitude
to help emergency
services know your
exact location.
To receive AAA Roadside Assistance you need to have a AAA membership in your possession. If you are not a AAA member, use the
Membership Enrollment Number to sign up.
Accessing AAA Roadside Assistance
1
From the Main Menu, tap on the tow truck
icon.
Tap on the tow truck to access Roadside
Assistance.
Entering Your AAA Membership Number
1
Access the Roadside Assistance screen.
2
Tap on
3
Use the keyboard to enter your AAA membership number. Tap
AAA Roadside Assistance
.
when done.
42
Trip Planner
The Trip Planner is used to create a route with multiple destinations. In this document we refer to a
route with multiple destinations as a “Trip”.
Creating a Trip
1.
From page 2 of the Main Menu, tap the Trip Planner icon.
2.
Select New from the Trip Planner Menu.
3.
Use the keypad to enter in a name for this
trip.
4.
Tap OK.
Enter a Trip Name
5.
Begin by adding the first destination in the
trip. Tap Add.
6.
Select the method to be used to find or
create the destination icon: Enter Address,
Address Book, POIs, or Intersection.
7.
Follow the instructions for the method
chosen to select the destination.
See the chapters on Enter Address and POI
for help in selecting destinations.
8.
Tap add to begin
When the destination is found the Add
Address to Trip screen is displayed. Tap
Save.
Tap Save to Add the Address
Trip Planner
43
9.
The list of trip destinations is displayed.
First Destination Added
10. Tap on the destination name to bring up the
menu.
11. Repeat steps 5 though 9 until the trip is
complete with all desired destinations.
Tap on Sears, Roebuck to open menu.
12. Tap Save.
Saving completed trip.
Starting a Trip
1.
From page 2 of the Main Menu, tap the Trip Planner icon.
2.
Select Guide Me from the Trip Planner Menu.
3.
Select the trip to be used from the stored trips list.
Trip Planner
44
4.
Tap on the destination in the list to be used
to as the first destination in the trip.
In the example shown, tapping on ‘Sears,
Roebuck’ (first destination in the list) would
activate a trip that be from your current
position to Sears, Roebuck, then Bank Of
America, then Claremont, CA and finally
Home Depot.
Tapping on the destination in Claremont,
CA would activate a trip that goes from your
current position to Claremont and then
Home Depot.
5.
Select first destination.
Select the routing method to be used and tap the orange Calculate Route button.
Editing a Trip
1.
From page 2 of the Main Menu, tap the Trip Planner icon.
2.
Select Edit from the Trip Planner Menu.
3.
Select the trip to be edited from the stored trips list.
4.
Tap on the destination to be edited. You
can:
Add a destination following the one
selected.
Move the destination up in the list.
Move the destination down in the list.
Delete the destination from the trip.
5.
When the trip has been edited, tap Save.
Edit Trip
Deleting a Trip
1.
From page 2 of the Main Menu, tap the Trip Planner icon.
2.
Select Delete, Rename from the Trip Planner Menu.
3.
Tap Delete.
4.
Select the trip to be deleted from the stored trips list.
5.
Confirm the deletion of the trip. Tap Yes.
Trip Planner
45
Renaming a Trip
1.
From page 2 of the Main Menu, tap the Trip Planner icon.
2.
Select Delete, Rename from the Trip Planner Menu.
3.
Tap Rename.
4.
Select the trip to be renamed from the stored trips list.
5.
Use the keypad to edit the name of the trip.
6.
Tap OK.
Trip Planner
46
Exit POIs
The Exit POI function provides a way of accessing commonly used POIs that are near an exit you are
approaching while travelling on a freeway. Exit POIs include restaurants, gas stations, auto repair
shops and hotels. Exit POIs can be accessed while on a route or just driving, as long as you are on a
freeway.
Routing to a POI Near an Approaching Freeway Exit
Note: This function is available only while on a freeway. Also, when you create a route to a POI near
an exit, the original route will be canceled if you are travelling on a route. You will need to reset the
original route when you are ready to continue.
1.
From the Map screen, tap MENU.
2.
Tap the Exit POIs icon.
3.
Tap on the POI icon (restaurant, gas station,
auto repair or hotel) for the exit required.
4.
A list of POIs in the category selected that
are near the exit chosen will be displayed.
5.
Tap on the POI in the list that you want
routing directions.
6.
Select the Route Method and tap the
orange Calculating Route button.
Exit POI List
Exit POIs
47
Bluetooth
Introduction
The Bluetooth function of the Magellan Maestro allows you to use the Magellan Maestro as a handsfree device for a Bluetooth enabled mobile phone. You can answer and dial your phone by using the
Magelan Maestro touchscreen..
Accessing the Bluetooth Main Menu
1.
From the Main Menu screen, tap
:
Bluetooth Main Menu
Pair Mode
If this is the first time the feature is used and no mobile phone is paired or connected, the system will
automatically switch “Pair Mode” and will wait for you to pair your mobile phone.
To pair a new phone or if the automatic pairing at first use was cancelled, you must pair the phone
with the Magellan Maestro before the Bluetooth function can be used.
Pairing a Phone to the Magellan Maestro
1.
Access the Bluetooth Main Menu.
2.
Tap on the Pair with a Device icon.
3.
The pairing search screen is displayed.
Pairing will fail if the process cannot be
finished within 1 minute.
4.
To pair your mobile phone, please consult
the user manual for your mobile phone.
During the pairing process on your moblie
phone you will be asked to input a passkey.
You can input any combination of numbers
but 1111 is suggested.
Bluetooth
Pairing Search
48
5.
A passkey input window will pop up on your
Magellan Maestro. You need to input the
same numbers as you input to your mobile
phone to this pop up window.
Passkey Request screen
Establish Connection
Once paired you will still need to establish connection with the mobile phone if the message “No
paired phone connected” appears at the bottom of the Bluetooth Main Menu screen.
If your mobile phone doesn’t support “Hands-free” service and just supports the “Headset” service,
you needn’t connect. If you dial a number out from your mobile phone or incoming call the “Headset”
service shall be connected automatically. The main interface shall show up with a status message "xx
connected, partial function supported only",
Establishing a Bluetooth Connection
1.
Access the Bluetooth Main Menu.
2.
Tap the Search for Devices icon.
3.
The Searching for devices screen will appear. Once a device is found it will return to the
Bluetooth Main Menu with a message at the bottom of the screen indicated that a device is
connected.
Place a call
Placing a Call
1.
Access the Bluetooth Main Menu.
2.
Tap the Call icon.
•
You can input 13 characters: “0~9”, *
and # with the buttons in the keypads.
Input “+” by pressing * for about 1
second.
•
You can tap
to delete the phone
number you have input. Press the button
for about half a second and the entire row
will be deleted.
•
Bluetooth
Once you have input the phone number you want to dial, tap
Call screen
to place the call.
49
Placing a Call Using the Address Book
1.
Access the Bluetooth Main Menu.
2.
Tap the Call icon.
3.
Select the search criteria; List All or Search Address Book.
4.
After searching or listing your entire address book, select the address from the list shown.
5.
If there is a phone number recorded for the address the “w:” (work), “h:” (home) or “m:”
(mobile) will appear as a button. Tap the desired button and the call will be initiated.
Placing a Call Using Call History
The “Call History” window displays a list of Incoming / Outgoing / Missed. calls.
1.
Access the Bluetooth Main Menu.
2.
Tap the Call History icon.
3.
Select the type of calls to be displayed.
Incoming Calls
Outgoing Calls
Missed Calls
Call screen
4.
Tap
Tap
to call back.
to delete a record selected. Tap
to delete all records on the page.
Placing a Call Using Redial
1.
Access the Bluetooth Main Menu.
2.
Tap the Redial icon.
Failed Call
If a call fails due to network trouble or other unknown reasons, the “Dialing Failed” window will pop
up:
• Tap
to redial.
• Tap
to cancel dial.
Bluetooth
50
Call Connected
If a call connects, the “Connected” window shall pop
up:
• Tap
to display a keypad to input the
extension after connected.
• Tap
to transfer the call to your mobile
phone.
• Tap
to turn off the microphone in the
Connected screen
Magellan Maestro.
• Tap
to hang up the call.
Incoming call
Answering an Incoming Call
1.
When there is an incoming call, the
“Incoming Call” window will pop up:
Tap
to pick up the incoming call.
Tap
to mute the incoming call ring.
Tap
to reject the incoming call.
Incoming Call
Bluetooth
51
User Options
Use User Options to customize the Magellan Maestro to better suit your needs from a GPS navigator.
Tapping the Back arrow from any of the User Option screens will cancel the changes.
Setting Map Region
If other map regions are available, either by having be preloaded or purchased as an accessory, the
proper map region must be selected for your area.
1.
From page 2 of the Main Menu, tap User Options.
2.
Tap Region.
3.
Select an available region from the list.
Accessing System Settings
Commonly used settings are found in the System Settings section of User Options.
1.
From page 2 of the Main Menu, tap User Options.
2.
Tap System Settings.
System Settings Menu
Checking Battery Life
1.
From page 2 of the Main Menu, tap User Options.
2.
Tap System Settings.
3.
The battery life indicator is found at the
bottom of the screen. All green indicated
full battery life.
Battery Life Indicator
User Options
52
Adjusting the Volume
Volume can also be adjusted by tapping on the speaker icon on the Map screen.
1.
From page 2 of the Main Menu, tap User Options.
2.
Tap System Settings.
3.
Tap Volume.
4.
Tap along the adjustment bar to increase or
decrease the speaker volume.
5.
Tap Mute to turn the speaker off. Tap Mute
again to turn the speaker back on.
6.
Tap Save.
Volume Setting
Adjusting the Display Brightness
1.
From page 2 of the Main Menu, tap User Options.
2.
Tap System Settings.
3.
Tap Brightness.
4.
Tap along the adjustment bar to increase or
decrease the display brightness.
5.
Tap On-battery dimming (75%) to set it on
or off. (Checked is on.) Checking it on will
save battery life while operating the
Magellan Maestro without external power.
6.
Tap Save.
Brightness Setting
Setting Auto Power Off Time
The auto power setting will define the time that the Magellan Maestro will automatically turn off if it
hasn’t moved or the touchscreen accessed.
1.
User Options
From page 2 of the Main Menu, tap User Options.
53
2.
Tap System Settings.
3.
Tap Power.
4.
Select Never, 10 Minutes, 20 Minutes or
30 Minutes.
5.
Tap Save.
Auto Power Settings
Selecting Language
The Magellan Maestro can be operated using English, French or Spanish as the language for
displayed text and voice commands.
1.
From page 2 of the Main Menu, tap User Options.
2.
Tap System Settings.
3.
Tap Language.
4.
Select English (US), Français, or Español.
5.
Confirm language. Tap Yes.
6.
Tap Save.
Setting Time Zone
1.
From page 2 of the Main Menu, tap User Options.
2.
Tap System Settings.
3.
Tap Time Zone.
4.
Use the “-” and “+” buttons to set through
the time zones until the time zone for your
area is displayed.
5.
Check Daylight Savings if daylight savings
is in effect for your time zone. (Daylight
savings is not automatically adjusted.)
6.
Tap Save.
Time Zone Settings
User Options
54
Selecting Units of Measure
1.
From page 2 of the Main Menu, tap User Options.
2.
Tap System Settings.
3.
Tap Units of Measure.
4.
Select Miles/Feet or Kilometers/Meters.
5.
Tap Save.
Displaying Contact Us Information
1.
From page 2 of the Main Menu, tap User Options.
2.
Tap System Settings.
3.
Tap
4.
Tap Contact Us.
5.
Tap Back arrow.
.
Contact Us Information
Displaying Product Information
1.
From page 2 of the Main Menu, tap User Options.
2.
Tap System Settings.
3.
Tap Next.
4.
Tap Product Information.
Product Information, Page 1
User Options
55
5.
Tap Next to view additional product
information.
Tap Prev to return to page 1.
6.
Tap the Back arrow to exit.
Product Information, Page 2
Performing Diagnostics
1.
From page 2 of the Main Menu, tap User Options.
2.
Tap System Settings.
3.
Tap Next.
4.
Tap Diagnostics.
5.
Tap Audio Test, Touchscreen Test or Video Test.
6.
When done, tap the Back arrow to exit.
Accessing the Trip Computer
The trip computer records your average speed, the time in hours of the trip, the time in hours that
you were driving, and the distance of the trip. This information can be saved to a file for easy
access when the information is needed.
1.
From page 2 of the Main Menu, tap User Options.
2.
Tap Trip Computer.
3.
Select the Current Trip or a Saved Trip from
the list.
4.
Select Stop to stop recording information.
Select Reset to set all the information to
zero. Select Reset when you are starting a
trip or route that you want to record details
for.
Current Trip Computer
Select Save to store the trip computer
information to a file. You will be prompted
to enter a name for the file. Input a name and tap OK.
5.
User Options
Tap the Back arrow to exit.
56
Selecting POIs to be Displayed on the Map
In some areas the map can be cluttered with POIs making it difficult to find what you are looking
for. Use POI Selection to set what categories of icons will be shown and which ones will be hidden.
1.
From page 2 of the Main Menu, tap User Options.
2.
Tap POI Selection.
3.
Tap on the POI category in the list to toggle
its display setting on or off. (Checked POIs
will be displayed.
Tap Mark All to check all POI categories.
Tap Clear All to uncheck all POI categories.
4.
Tap Save to save changes and exit.
POI Selection Screen
Deleting Addresses from the Address Book (Global)
The chapter on addresses discusses how to delete individual addresses from the address book.
Address Book Options provides a way of globally deleting addresses from the address book.
1.
From page 2 of the Main Menu, tap User Options.
2.
Tap Address Book Options.
3.
Tap Clear Addresses to delete all of the addresses in your Address Book.
Tap Clear Favorites to delete only those addresses marked as Favorites from your Address
Book.
Tap Clear Previous to delete previous destinations from the Address Book.
4.
Tap the Back arrow to exit.
Setting the Map in 3D or 2D Mode
See the chapter on Maps for information regarding 3D and 2D modes of the map.
1.
From page 2 of the Main Menu, tap User Options.
2.
Tap Map Options.
3.
Select 3D Map or 2D Map.
4.
Tap Save to record the changes and exit.
User Options
57
Setting the Map Display to Heading Up or North Up
The map can be displayed with the top of the display in the direction of your heading or North.
1.
From page 2 of the Main Menu, tap User Options.
2.
Tap Map Options.
3.
Select Heading Up or North Up.
4.
Tap Save to record the changes and exit.
Setting Split Screen (TrueView™) Options
As you approach a maneuver, the display changes to the split screen mode. Under Map Options you
can turn off the split screen or set it to be just the TrueView portion of the split screen.
1.
From page 2 of the Main Menu, tap User Options.
2.
Tap Map Options.
3.
Tap Auto TrueView to turn set it to on or off. (Checked is on and the TrueView image will be
displayed.)
4.
Tap Split TrueView to set the TrueView display to split or single view. (Checked sets split
screen on.)
TrueView Split Screen
5.
TrueView Single Screen
Tap Save to record the changes and exit.
Setting Auto Night Map Display
Normally the map is displayed in the pastel colors for daytime use and a black background for
nighttime use. Unchecking the Auto Night Mode will keep the map display using the pastel colors.
1.
From page 2 of the Main Menu, tap User Options.
2.
Tap Map Options.
3.
Tap on Auto Night Mode. (Checked indicates that the map will automatically change to
night colors; unchecked and the map will always use the day colors.) Note: If the screen has
already switched to night colors, unchecking the box will not cause the display to go to the
User Options
58
day colors. The switch to day colors will occur the following morning and then stay in day
colors.)
4.
Tap Save to record the changes and exit.
Setting Detour Options
Normally the map is displayed in the pastel colors for daytime use and a black background for
nighttime use. Unchecking the Auto Night Mode will keep the map display using the pastel colors.
1.
From page 2 of the Main Menu, tap User Options.
2.
Tap Detour Options.
3.
Select the default for the distance to be
used to detour around traffic problems
while routing.
Set the alert timer. (Enter the time from
the keypad.)
Check Enable automatic detour on or off.
(Checked is on and the Magellan Maestro
will automatically offer detour routing when
it computes you are stuck in slow or
stopped traffic situations.)
4.
Detour Options Screen
Tap Save to record the changes and exit.
Using the Simulator
When turned on, the simulator will offer the option of simulating movement on a route. Useful for
learning about the Magellan Maestro while not driving.
1.
From page 2 of the Main Menu, tap User Options.
2.
Tap Simulator Mode.
3.
Tap Propose simulator mode when
calculating route. When checked, the
Magellan Maestro will ask if you want the
route simulated when it is created.
Simulation mode will ignore actual
movement and should only be used for
training purposes.
Tap on the speed factor desired.
Tap <<1mi or 1m>> to set the route forward
or backwards 1 mile.
Simulator Mode Screen
Tap Restart to begin the route you are currently simulating back to the beginning.
Tap Stop to end simulating the current route you are simulating.
User Options
59
(The Simulate button is presently not active.)
4.
Tap Back arrow to record the changes and exit.
Setting Tone Options
Provides a way of selecting the tone used to announce arrival at a maneuver or destination.
1.
From page 2 of the Main Menu, tap User Options.
2.
Tap Tone Options.
3.
Select Bell, Chime or Beep.
4.
Tap Save to record the changes and exit.
Setting Navigation Instructions
Set which instructions will be announced using text-to-speech.
1.
From page 2 of the Main Menu, tap User Options.
2.
Tap Navigation Instruction.
3.
Tap Announce street name to check or uncheck. When checked, street names will be
announced using text-to-speech.
Tap Announce exit ramp name to check or uncheck. When checked, exit ramp names will be
announced using text-to-speech
4.
Tap Save to record the changes and exit.
Viewing Technical GPS Information
This screen provides technical information about the satellites being used to compute the GPS
position.
1.
From page 2 of the Main Menu, tap User Options.
2.
Tap GPS Options.
3.
Tap GPS Status.
PRN: pseudo random number that
identifies the satellite
AZ: Azimuth of the satellite
EL: Satellite elevation
SNR: Satellite signal-to-noise ratio
TTFF: Time to First Fix (in seconds)
4.
Tap Back arrow to exit.
User Options
60
Setting the GPS Position
Setting a GPS position is useful if you are not getting satellite information quickly because the
Magellan Maestro has travelled over 500 miles while turned off. Setting the GPS position will allow
the Magellan Maestro to compute which satellites are available and calculate the position quicker.
1.
From page 2 of the Main Menu, tap User Options.
2.
Tap GPS Options.
3.
Tap Set GPS Position.
4.
Follow the prompts to enter the address where you currently are.
5.
Tap Done when finished entering the address.
Backing Up and Restoring Data
Backup and restore provides a way of storing the address book and other data to a SD/MMC card.
When the data has been backed up, it can be restored at any time. Please note that when you
restore from backed up data, address book and other data will be replaced with the data. The
Magellan Maestro cannot append backed up data to your existing data.
Backing Up Data
1.
From page 2 of the Main Menu, tap User Options.
2.
Insert a SD or MMC card with available space into the SD slot of the Magellan Maestro.
Note that backing up data will overwrite any back up files on the SD or MMC card.
3.
Tap Backup and Restore.
4.
Tap Backup.
5.
Confirm backup. Tap Yes.
6.
Operation successful! Tap OK.
7.
Tap Back arrow to exit.
Restoring Data
1.
From page 2 of the Main Menu, tap User Options.
2.
Insert a SD or MMC card with available space into the SD slot of the Magellan Maestro.
Note that backing up data will overwrite any back up files on the SD or MMC card.
3.
Tap Backup and Restore.
4.
Tap Restore.
5.
Confirm restore. Tap Yes.
User Options
61
6.
Operation successful! Tap OK.
7.
Tap Back arrow to exit.
Viewing Map Information
1.
From page 2 of the Main Menu, tap User Options.
2.
Tap Map Information.
3.
Tap Back arrow to exit.
Map Information Screen
User Options
62
Appendix A - POI Categories / Subcategories
Icon
Category
Subcategories
Gas Stations
Restaurants
American Food
African Food
Australian Food
Austrian Food
Balkan Food
Barbecue/Southern
Belgian Food
Bistro
Bohemian Food
Brewpub
British Isles Food
Cajun/Caribbean Food
Californian Food
Canadian Food
Chinese Food
Continental Food
Dutch Food
East European Food
Fast Food
Filipino Food
French Food
German Food
Greek Food
Grill
Hawaiian/Polynesian Food
Hungarian Food
Indian Food
Indonesian/Malaysian Food
International Food
Italian Food
Japanese Food
Jewish/Kosher Food
Korean Food
Latin American Food
Maltese Food
Mexican Food
Middle Eastern Food
Others
Polish Food
Portuguese Food
Russian Food
Sandwich
Scandinavian Food
Seafood
South American Food
Southeast Asian Food
Southwestern Food
Spanish Food
Steak House
Surinamese Food
Swiss Food
Thai Food
Turkish Food
Vegetarian
Vietnamese Food
Coffee
Appendix A
POI Categories
A-1
Shopping
Book Store
Clothing Store
Department Store
Discount Store
Entertainment Electronic
Flowers & Jewelry
Furniture Store
Record, CD Video
Shoe Store
Specialty Clothing Store
Specialty Store
Shopping Malls
Sporting Goods
Womens Apparel
Video & Gaming Rental
Men’s Apparel
Airports
Bank/ATMs
Convention Center
Education
Entertainment
Cinema
Performing Arts
Golf
Golf Course
Golf Practice Range
Grocery Store
Grocery Store
Convenience Store
Wine & Liquor
Specialty Food Store
Health Services
Dentist
Hospital/Polyclinic
Medical Service
Optical
Pharmacy
Home Improvement
Garden Center
Floor & Carpet
Hardware Store
Home Center
Home Specialty Store
Glass & Window
Lumber
Major Appliance
Paint
Hotels
Appendix A
POI Categories
A-2
Marina
Nightlife
Parking
Public Buildings
Civic/Community Center
City Hall
Court House
Library
Police Station
Post Office
Car Rental
Rest Area
Sports & Recreation
Bowling Alley
Race Track
Recreation Center
Sporting & Instructional
Tourist Attraction
Amusement Park
Historical Monument
Museum
Tourist Attraction
Tourist Information
Transportation
Border Crossing
Bus Station
Commuter Rail Station
Ferry Terminal
Park & Ride
Train Station
Sports Activities
Sports Complex
Park/Recreation Area
Health Club
Winery
Other Services
Appendix A
Cleaning & Laundry
Hair & Beauty
Tailor & Alteration
Veterinarian
POI Categories
A-3