Clarke PIONEER 220 Technical data

COMPRESSORS
OTHER COMPRESSORS
Compressors
code
list
TOLPED15500 £344.95
Tradeline
price
£239.36
Clarke Shhh...Air An ultra quiet
compressor emitting just 40 db at 1 m.
Suitable for powering the SATAjet 20 B and
SATAgraph airbrushes. Output 2.15 cfm with
a 9 litre receiver. 8 bar [115psi] maximum
working pressure. 240V. These compressors
have a 50% duty cycle and are suited to the
studio or model shop but not heavy duty use.
For oil see .
à
PIONEER RANGE
Fini Pioneer 265M This Fini
compressor with a 2 hp motor delivers 7.6
cfm [15 m3/h] making it ideal for the
freelance scenic artist needing a
compressor which is easy to transport in
the boot of a car. It takes a 9 mm
BestSATA-type hose which will push-fit direct
Seller.
to the compressor’s connector. If you
need to use 8 mm bore hoses see the
Pioneer Convertor on page 1.68.
Air Receiver: 9.5 L. Maximum Working Pressure: 10 Bar
[145 psi]. 230 V, 8 A. Dims [LWH]: 395 x 320 x 630 mm.
dB[A] 76. Wt: 22 kg. o Supplied with a panel that protects a pressure switch
and pressure regulator, including pressure gauge and universal quick
coupler for 9 mm hoses.
Fini Pioneer Compressor 265M
code
list
price
Tradeline
FIN265M
n/a
£269.00
9 mm bore hose [10 m]
SATAMIM1030
£82.40
£77.74
Clarke Shhh...Air 3/9
Shhh...Air 3/9
code
TOL803
list
£529.40
Tradeline
price
£395.00
COMPRESSOR OIL
Compressor Oil Treat
a
them to some TLC. They do
need oil! You’d be surprised
how many compressors we find
c
with empty sumps. We
b
recommend oil “a” for the Fini Pioneer compressor and oil
“b” for the Clarke Pioneer and Raider compressors. The
Shhh...Air compressor uses synthetic oil.
Compressor Oil
code
a For Pioneer 265/Big Pioneer FIN6102250000
b For Raider & Pioneer 220 CLA3050810
c For Shhh....Air
CLA3050795
1L
code
£9.33
—
£7.95 CLA3050802
£12.95
—
5L
—
£21.37
—
Fini Big Pioneer Fitted with a
powerful 3 hp 230 V motor delivering 10
cfm [17 m3/h]. The large 20 L receiving
tank is suited for small workshops or for
paint frame use. This compressor is still
very compact and portable although it is
a bit of a heavy lift to get into a car. A 9
mm SATA-type hose will push fit directly
to the compressor’s connector. If you
need to use 8 mm bore hoses see the
Pioneer Convertor [page 1.68].
Air Receiver: 20 L. Maximum Working Pressure: 10 Bar
[145 psi], controlled by a fully automatic pressure switch. 230/240 V, 9.5 A. Dims [LWH]: 470
x 490 x 720 mm. dB [A] 80, Wt: 33.5 kg. o Supplied with a pressure switch, a
safety valve, drain valve, pressure regulator, including pressure gauge
and universal quick-coupler for 9 mm hoses.
Tradeline
Big Pioneer Compressor 312M
code
list
price
FIN312MB
n/a
£390.00
9 mm bore hose [10 m]
SATAMIM1030 £82.40
£77.74
Flints, Queens Row, London, SE17 2PX
1
Clarke Raider 15/500
15/500
SECTION
Clarke Raider 15/500 A
powerful British-made portable V-twin
compressor delivering 14.5 cfm with a 50
L tank. Ideal for use with air tools and most
spray equipment. Supplied with a moulded
13 A 3-pin plug to BS1363/A. Fuse rating: 13
A. 230 V single-phase 3 hp motor.
Maximum working pressure: 8 bar. Weight:
42 kg. Fitted with regulator and gauge. For oil see .
NOTE 3 hp motors can run on a 13 A plug so long as they are not run on an extension lead.
à
The compressors that Flints stocks are mainly used by scenic artists to
power their spray guns or by technicians requiring air for nailers and
staple guns. Most of the ones we list are easily portable so that they can
be lifted into the boot of a car for work in a variety of locations.
Consideration should be given to the air output from the compressor.
Almost any compressor will achieve the pressure needed but it is the
volume of air which is important. The popular SATAJet 1000 B RP spray
gun will use around 7.1 cfm at full tilt whereas the SATAminijet 3000 B
HVLP uses around 4 cfm. As scenic work normally involves stop/start
spraying they will operate satisfactorily from small portable compressors
giving upwards of 7 cfm. Be careful though, because some HVLP guns use
large quantities of air [the SATAjet 4000 HVLP uses 15.2 cfm] and really
require large fixed-installation compressors [please phone for details of
larger units]. Flints has spent a lot of time looking at the compressor
market and has not found it possible to source a truly rugged unit that
can still be easily transported in the boot of a car. The compressors we
list will not withstand continuous use at full pelt. They should, however,
provide reasonable service for the freelance painter for two or three years
so long as they are treated with a little care and given some oil from time
to time. Choose a unit with some spare capacity to ensure a good service
life and please spare a moment to read the instructions!
T: 020 7703 9786
F: 020 7708 4189
www.flints.co.uk
1.67
AIR HOSES AND FITTINGS
8 mm BORE HOSES 1/4” BSP THREADS
SECTION
1
9 mm BORE HOSES [FOR SATA] 1/4” BSP THREADS
The wide bore and special design of the quick release fittings will allow
a far greater air flow to the gun. In a simple experiment using a
conventional 8 mm hose and one of these 9 mm hoses connected to a
“Y” fitting it was found that the 9 mm hose delivered almost twice
the volume of air. Using these lightweight and very flexible hoses may
help to solve the struggle to find a small portable compressor that
delivers enough air volume to your spray gun. By the way, if you are
using 9 mm bore hoses on Clarke compressors, don’t tighten them up
too hard but use some PTFE tape to make the threads seal. If you
tighten them, the air will not flow!
8 mm Bore Air Hose High pressure [300 psi] round rubber
hoses with 1/4” BSP swivel nut fittings. If you are using HVLP spray
equipment you may consider upgrading to 9 mm hoses which are listed
on the previous column.
8 mm Bore Air Hose
10 m
15 m
30 m
Worm drive hose clips
price
£11.45
£17.20
£29.90
£0.51
[11 - 16 mm]
8 mm BORE AIR HOSE FITTINGS 1/4” BSP THREADS
1/4” Hose Fittings for 8 mm Bore Air Hose
9 mm Bore Air Hose A good quality very
Endless fun and confusion! As a bit of a guide, this is what you would
need if you want to couple a compressor with 1/4” male thread to a
spray gun using quick release fittings. Mount a “snap female body”
onto the compressor, put a “snap male adapter” into one end of the
hose. The hose will now snap onto the compressor. Put a “snap male
body” onto the other end of the hose and a “snap female adapter”
onto the gun. The gun will now snap onto the hose. Easy peasy! To
simplify things just order the top four listed below.
flexible and lightweight 10 m hose with quick
release couplings on each end. Plugs straight into
the Fini Pioneer 265M Compressor [page 1.67].
9 mm Bore Hose
10 m
code
SATAMIM1030
Tradeline
price
£77.74
list
£82.40
9 mm Quick Fitting Female Female quick
release to suit most compressors. [1/4”BSP].
Female Compressor End
code
SATA13599
price
£13.00
9 mm Quick Fitting Male Male quick
release to suit most hoses. [1/4”BSP].
Male Compressor End
code
SATA13623
price
£13.50
Compressor to gun snap connectors
1.68
code
TOL822H
TOL823H
TOL820H
GEN051
Fittings
Snap female body
à
code
TOL842
price
£3.58
à
Snap male adapter
TOL831
£1.25
à
Snap male body
TOL841
£3.58
à
Snap female adapter TOL832
£1.25
Snap hose adapter
TOL833
£1.25
1
/4” hose adapter
TOL824
£0.95
Tail 1/4” nut
TOL844
£0.95
Hose joint
TOL843
£1.25
Gun End Quick Fitting Quick release to suit
most guns. [1/4”BSP Thread].
Female Male See also the SATA Turbo Nozzle on page 1.72
Gun End Fitting
code
Female (most common)
SATA13656
Male
SATA53942
price
£5.84
£6.70
Y Connectors Available either
complete with snap fittings ready to
take standard 8 mm bore air hoses
[when fitted with snap adapters] or as a plain
fitting with female 1/4” BSP threads on all outlets.
Swivel for Spray Guns A very useful
attachment for the SATA guns, the swivel allows the
hose to move freely without kinking.
Swivel for Spray Guns
For all SATAjet guns (non-digital topcoat guns)
For all digital guns, SATAminijet, 1000 & 100 series
code
SATA19745
SATA16162
price
£27.00
£26.50
Nipple Male BSP Useful to convert
a female fitting to a male one or to convert
a 1/2” wall outlet to 1/4” BSP thread.
Tapered threads.
code
price
TOL103014
£1.20
TOL103016
£2.40
Nipple Male
1/4” to 1/4”
1/4” to 1/2”
PIONEER CONVERTOR
Push-fit converter This adaptor will
allow 8 mm hoses with standard push fittings to
be fitted to the Pioneer 265M and Big Pioneer compressors.
Push-Fit Converter
code
price
TOL845K
£9.30
Flints, Queens Row, London, SE17 2PX
Type
Y Connector with fittings
Y Connector plain
code
TOL8Y
TOL103301
price
£11.95
£3.00
6 mm BORE HOSES 1/4” BSP THREADS
6 mm Coiled Air Hose Useful for
running small spray guns when the air outlets
are ceiling-mounted. 6 mm bore with 1/4” BSP
screw connectors on each end. Max working pressure 150 psi [10.5 bar].
6 mm Coiled Air Hose
7.5 m
code
TOL3110458
price
£5.40
P.T.F.E. TAPE
P.T.F.E. Tape Used to lubricate and seal air hose joints.
P.T.F.E. Tape
T: 020 7703 9786
code
TAP077
F: 020 7708 4189
small roll
£0.80
www.flints.co.uk
SATA SPRAY EQUIPMENT
HVLP and RP?
SATAjet 4000 B & SATAjet 4000 B DIGITAL
Choose
this for the
ultimate finish.
SATAjet 4000 B RP The
SATAjet 4000 B is setting the
standards. Featuring state-of-the-art
technology, this spray gun has been
optimised with the passion for
precision so typical of SATA, as well as
undergoing intensive practical tests.
The result: a soft spray pattern which
is second to none, perfect ergonomics
and outstanding atomisation for
excellent finishes. You should choose
this gun if you are seeking the ultimate
fine finish but for most scenic work you
may want to consider the SATAjet 100
or the versatile SATAjet 1000 series.
Have
4 15% lighter, just 491 g
you tried the
4 Improved handling
RPS system? See
4 Higher precision
page 1.71.
4 50% noise level reduction
4 Allows a uniform and perfectly-shaped spray fan
4 Improved setup functions
4 Smoother spray action
TECHNICAL DATA Inlet Pressure: 2-2.2 bar [29-31.9 psi]. Air Consumption: 285 NI/min [10.1
cfm]. Spray Distance: 170 – 210 mm [7 – 8 inches]. o Supplied with 0.6 L PVC cup.
Satajet 4000 B RP
1.3 mm Standard
1.3 mm Digital
Spare Cup
code
list
SATA166769 £488.00
SATA166579 £543.00
SATA27243
Flints, Queens Row, London, SE17 2PX
Tradeline
each
£390.40
£434.40
£47.00
SATAjet 1000 B RP This is a
universal gun with a wide range of
set-ups from 0.8 mm right through to a
staggering 5 mm! Flints stocks the 1.6
mm, a real all-rounder, the 2 mm and 2.5
mm for coverage of larger areas with a
bit more texture, and the massive 4 mm
set-up for large splatter and heavy
texture effects [especially when
pressurised! – see page 1.72]. Chosen by
the Royal Opera House, National Theatre
and leading scenic artists as their
preferred gun for splattering large
cloths. The SATAjet 1000 range not only
has a wide variety of set-ups but also
has some useful accessories such as
nozzle extensions for spraying floor cloths [see page 1.71].
TECHNICAL DATA Inlet Pressure: 1.5-2 bar [21.8-29.00 psi]. Air Consumption: 275 NI/min [7.1
cfm]. Spray Distance: 180-230 mm [7– 9 inches]. o Supplied with 0.6 L PVC cup.
4 Amazing splatter effects when used at low pressure
4 Fine atomisation when used at recommended pressure
4 Optimum finish results in all fields of application
4 Robust, long-lasting and easy to clean
4 Suitable for waterborne paints and corrosion resistant
4 Easy clean surface 4 Compact and lightweight
4 VOC-compliant 4 Wide range of nozzle sizes: 0.8 – 5.0 mm!
4 Extensive range of accessories, such as extensions and
pressurised cups, etc
4 Great value for a gun of this quality
SATAjet 1000 B RP [normally held in stock]
Gun with 4.0 mm set-up
Gun with 2.5 mm set-up
Gun with 2.0 mm set-up
Gun with 1.6 mm set-up
code
SATA154161
SATA151209
SATA149328
SATA149310
list
£328.00
£305.00
£305.00
£305.00
Tradeline
price
£262.40
£244.00
£244.00
£244.00
SATAjet 1000 B RP [available to order]
Gun with 0.8 mm set-up
Gun with 1.0 mm set-up
Gun with 1.3 mm set-up
Gun with 1.8 mm set-up
Gun with 3.0 mm set-up
code
SATA151183
SATA151191
SATA149302
SATA150391
SATA151217
list
£305.00
£305.00
£305.00
£305.00
£305.00
Tradeline
price
£244.00
£244.00
£244.00
£244.00
£244.00
SATAjet 1000 B RP Nozzle Sets
0.8 mm set-up only
1.0 mm set-up only
1.3 mm set-up only
1.6 mm set-up only
1.8 mm set-up only
2.0 mm set-up only
2.5 mm set-up only
3.0 mm set-up only
4.0 mm set-up only
5.0 mm set-up only
code
SATA151316
SATA151324
SATA149161
SATA149179
SATA150417
SATA149187
SATA151332
SATA151340
SATA154187
SATA154195
price
£107.30
£107.30
£107.30
£107.30
£107.30
£107.30
£107.30
£107.30
£132.70
£132.70
PLEASE NOTE SATAjet 1000 B RP set-ups and nozzle sets may need to be
ordered in from Germany therefore please allow 7 days for delivery.
T: 020 7703 9786
For special storage boxes for your lovely new
gun see page 1.73
F: 020 7708 4189
www.flints.co.uk
1
The old-style high-pressure guns have been phased out for health and
environmental reasons. The old type of gun, such as the DeVilbiss GFG,
would often put as much as 65% of the paint material into the atmosphere
rather than onto your canvas. Not only is this a considerable health risk
but it is a waste of expensive scenic paint.
HVLP stands for High Volume Low Pressure. A spray gun with this
specification will place at least 65% of your paint where you want it, on
the canvas, and not in the air. These guns tend to have a slightly different
feel to high-pressure guns and they generally require very high volumes
of air. Except for the small SATAminiJet 3000, HVLP guns are more suited
to paintshops which have large fixed compressors. SATA HVLP guns have
a green ring around their air cap.
RP stands for Reduced Pressure. Guns to this specification also comply
with the latest regulations but provide a more similar feel to the old
high-pressure guns. They require less air volume and so are more suitable
for the freelance scenic artist using a small portable compressor. SATA
RP guns have a blue ring around their air cap.
When using these high-specification guns it is advised, although not
crucial, to use 9 mm bore hoses. These hoses will deliver almost twice
the volume of air than the more common 8 mm bore hoses.
SATAjet 1000 B RP
SECTION
Flints stocks SATA spray equipment specially selected to suit the
scenic artist. With more than 100 years dedicated to providing
high-tech spray equipment to over 85 countries, SATA provides a
uniform standard of quality which is recognised in the industry as
superior. By purchasing SATA equipment you can expect the very best.
1.69
SECTION
1
SATAjet 100 B F RP
SATAminijet 4400 B RP PVC SPRAY GUN
SATAjet 100 B F RP This is a really
excellent reduced-pressure gun at a fantastic
price. When operated at around 0.5 bar with the
material flow set to high it produces an
excellent large splatter effect. These effects
need lots of paint so please ensure your paint
is diluted enough to flow really freely and make
sure the breather in the air cap is clear to avoid
Great
any suction. When operating at the
price for a
recommended pressure of 1.5 – 2 bar the gun
superb gun!
provides a controlled spray pattern and rapid
even coverage. The air consumption matches the small portable
compressors typically used by freelance scenic artists. For scenic work
this is an excellent choice of gun. TECHNICAL DATA Inlet Pressure: 1.5 – 2 bar
[21.8-29psi]. Air Consumption: 290 Nl/min – 245 Nl/min [7.1 cfm]. Spray Distance: 180 – 230
mm [7 – 9 inches]. Nozzle Size can be increased to 2.5 mm see SATAjet 100 BP below.
SATAjet 100 B F RP Standard Set-up Choose this
1.70
version for maximum versatility. Nozzle size
selling gun.
SATAjet 100 B F RP Standard Set-up
code
Gun 1.6 mm nozzle & 0.6 L cup
SATA145193
Gun 1.6 mm nozzle & 0.75 L ali cup SATA146134
Spare 0.6 L cup
SATA27243
1.6 mm. Our biggest
Tradeline
list
price
£249.00 £199.20
£250.00 £200.00
£47.00
SATAjet 100 B F RP Scenic Set-up Extra large 2 mm
nozzle for very high material flow rates.
SATAjet 100 B F RP Scenic Set-up
code
Gun 2 mm nozzle & 0.6 L cup
SATA145219
Gun 2 mm nozzle & 0.75 L ali cup SATA147421
Spare 0.6 L cup
SATA27243
Tradeline
list
price
£249.00 £199.20
£250.00 £200.00
£47.00
SATAjet 100 B P for FILLERS AND GESSO
For
fillers and
splatters.
SATAjet 100 B P Any waterborne and
solvent-based material available on the
market can be sprayed without restrictions
using this spray gun which was designed for
spraying polyester fillers. The huge 2.5 mm
nozzle enables fantastic splattering effects to
be performed at speed but the gun will also
cope with applying layers of Idenden Spraycote
and, of course, spray fillers. This gun is not
fitted with an air micrometer, flow should be
regulated at the compressor.
4 A specialist gun for spraying fillers and gesso
4 Correct atomisation for fillers etc. Very controlled application
4 Capable of large splatter effects when used at low pressure
TECHNICAL DATA Inlet Pressure: 2 bar [29psi]. Air Consumption: 245 Nl/min [8.7 cfm]. Spray
Distance: 180 – 230 mm [7 – 9 inches].
Tradeline
SATAjet 100 B P
code
list
price
Gun 2.5 mm nozzle & 0.6 L cup
SATA145185
£249.00 £199.20
Gun 2.5 mm nozzle & 0.75 L ali cup SATA146217
£250.00 £200.00
Spare set up [also fits 100 B F RP] SATA145284P
£93.20
SATAminijet 4400 B RP PVC
This is the latest version of the very popular
Minijet style of gun. This MiniJet 4400 is
slightly larger than the old 3000 version but
still compact and light in weight. With its
ergonomic handle shape, this is possibly the
most comfortable spray gun available. It is
often chosen because of its suitability for
Take
detailed work but soon the user finds that it
spots up to
is a very versatile gun for general work, too.
.9L directly!
This new version is even more versatile with
the ability to produce a much wider spray pattern whilst still being
able to focus down to lines just a pencil thickness wide! Furthermore,
the 3000 model was restricted to small size cups [unless an adapter
was purchased] but this version will take all QCC quick cup connectors
including the RPS system. We have chosen to stock this RP version of
this gun which is more suited to scenic work. The air consumption of
7.1 cfm is based on the highest pressure setting, generally the air
consumption will be much lower.
TECHNICAL DATA Inlet Pressure: 0.5 - 2.5 bar [7 – 36 psi]. Air Consumption 200 Nl/min – 245
Nl/min [7.1 cfm] at 2.5 bar. Spray Distance: 120 – 190 mm. Wt: 293 g.
SATAminijet 4400 B RP [1.2 mm set-up] code
list
Gun 1.2 mm SR nozzle & .125 L cup SATA198226 £261.00
Spare QC cup 0.125 L
SATA197541
Larger 0.6 L cup
SATA27243
Spares for SATAminijet 3000 B HVLP
code
RPS adapter for cups to 0.9 L
SATA135798
Tradeline
price
£208.80
£44.60
£47.00
price
£35.90
SATAjet 20 B AIRBRUSH
SATAjet 20 B Airbrush This
air brush is designed for fine detail and
artwork. Ideally suited for modelmaking and
stencilling. Most airbrushes are held like
pens and can be awkward to handle but this
SATA airbrush has the conventional grip that
most scenic artists are familiar with. It will
also cope with paints that small airbrushes
cannot handle. Air Consumption: 1.4 cfm.
This gun will operate using the very quiet
Shhhh..Air compressor listed on page 1.67.
Supplied with 65 cc gravity cup plus 25 cc
plug-in glass cup and 3 spare glass cups. Air
Take
Pressure: 1 bar [14.5psi]. Tip: Please pull in the
a look at Ben Johnson’s
trigger prior to screwing on the air cap or the
amazing paintings at
hard needle will wear away the softer air cap.
SATAjet 20 B Choose the 0.5 mm www.benjohnsonartist.com
version for the finest model work or the 1 mm
version for modelmaking and stencilling.
SATAjet 20 B
Gun 0.5 mm nozzle & 0.6 L cup
Gun 1 mm nozzle & 0.6 L cup
Spare 1 mm set up
code
list
SATA86207 £295.00
SATA86223 £295.00
SATA61523
Tradeline
price
£265.77
£265.77
£67.30
Problems splattering?
Spray gun designers go to huge lengths to provide perfect paint atomisation, so to get a splatter effect we need to break all the rules! Set the air pressure
very low, say 0.5 bar, and set the material flow very high. The gun should splatter merrily away. However, it will need to use a large quantity of paint so it
is crucial that:
a) The breather hole on the air cap is not blocked or partially blocked to create suction. If in doubt take the cap off the lid.
b) The paint is sufficiently diluted to flow easily through the gun. It should be really sloppy.
c) If you want to splatter thick textured materials such as Crystalgel or Gesso then it is best to pressurise the pot [page 1.72]. Happy splattering!
Flints, Queens Row, London, SE17 2PX
T: 020 7703 9786
F: 020 7708 4189
www.flints.co.uk
SATAgraph 3
SATAgraph 3 An airbrush suited for
SATA 1 L Alloy Cup Quick change cup for any SATA gun with
or without QCC.
1 L Alloy Cup
code
SATA96685
price
£50.00
SATA Cleaning Set Complete with 2 cleaning brushes and 12
SATAgraph 3
SATAgraph 3 without hose
3 m PVC hose and fittings
code
list
SATA134569 £253.00
SATA32987
Tradeline
price
£227.93
£40.40
cleaning needles.
Cleaning Set
code
SATA64030
price
£29.20
Air Micrometer with Gauge This
useful compact micrometer and gauge can be
attached directly to the gun. Air pressure may
drop over the length of the hose so readings
taken from the compressor can be inaccurate.
This gauge allows the painter to make fine
pressure adjustments without having to go to the compressor. Ideal
for setting up scenic effects. Can also be used on other makes of gun.
SATA Air Micrometer with Gauge
When purchased alone
When purchased with a gun – save 15%
code
price
SATA27771
£68.70
SATA27771+Gun £58.40
ADAM 2 Digital Micrometer This is
an upgrade of the ADAM Digital Micrometer.
4 Weighs just 49 g – lighter than ADAM model
4 User can replace battery easily and quickly
4 Imminent battery exchange indicated on the
display
4 Lifetime of battery is now up to 30% higher
4 EX-proof and ATEX approved
4 With extra docking stations the display can be
.....quickly moved from gun to gun
SATA ADAM 2 Digital Micrometer
ADAM 2 display only [needs docking station]
ADAM 2 including docking station
ADAM 2 inc. docking station for SATAminijet
ADAM 2 docking station only
ADAM 2 docking station only for SATAminijet
ADAM 2 battery kit
code
SATA160689
SATA160846
SATA160879
SATA160788
SATA160861
SATA160739
price
£148.60
£181.90
£181.90
£60.10
£60.10
£27.70
SATA ACCESSORIES
Universal Spray Gun and Hose
Holder A well thought through device that
will hold any SATA spray gun with or without its
cup and also provides a home for the hose, too.
Universal Gun Holder code
price
SATA192195
£41.30
SATA Gravity Cup Filters Gravity
cup filters to fit all the SATA guns except the
small SATAminijet 3000 B HVLP and SATAjet 20
which should have their paint filtered before
pouring into the cup. Packs of 10. For more paint
filters and strainers see page 1.65.
SATA Gravity Cup Filters
code
price
SATA Gravity Cup Filters [pk 10]
SATA3988
£17.30
Flints, Queens Row, London, SE17 2PX
1
SATA RPS RAPID PREPARATION SYSTEM
SATA AIR GAUGES
SECTION
the finest graphic work. Nozzle Size: 0.25.
Gravity Flow Cup: 2.5 ml. Inlet pressure
variable. Air consumption just 0.4 cfm
[approx 10 Nl/min] allowing the use of a
small Shhh...Air compressor. In order to
couple up to a compressor you will need to
purchase the 3 m long PVC hose which is
complete with all the fittings.
SATA Silicone-free Grease High-performance grease for
spray guns. Acid-free. 100 g tube. An essential accessory.
Silicone-free Grease
tube
code
price
100 g
SATA48173
£9.20
SATA RPS Rapid
Preparation system
One cup with four functions
4 Mixing 4 Painting
4 Refilling 4 Storing
A true all-rounder. The clear graduated RPS cup stands on the
bench and mixing takes place directly into the cup. No need to use
an extra paint kettle. The cup will then fit directly to any SATA gun
with the QCC connection or standard cup thread [although the
An
SATAMinijet will require the listed adapter]. The very low weight
ingenious time
helps the ergonomics. When changing colour, simply remove the
saving device!
cup and attach the airtight seal. The paint can be stored in the
cup ready for its next use. Attach a new RPS cup and carry on
spraying. Once the job is complete the used cups can be stacked inside
each other and disposed of without having to waste time and solvents
cleaning. Cups are also available in .9 L size to dramatically increase
the guns capacity. Adapters are available so this system can be to used
with other makes of gun – please phone for details. Tip: If you are
spraying a ceiling just bend the RPS cup forwards and it will enable
you to spray upwards! You can even bend them sidewards! Brilliant.
SATA RPS Rapid Preparation System
code
price
0.6 L RPS with plug in sieve
SATA125070 £2.45
0.9 L RPS with plug in sieve
SATA118489 £2.79
Adapter for Minijet 2, 3, 4 or 3000 SATA135798 £35.90
price
qty break
57+ £1.43
40+ £1.63
EXTENSIONS FOR SPRAYING BOXES AND FLOORS
SATA Extension A 200 mm long
extension with a 1.6 mm nozzle to fit SATA
1000 B RP Guns. Ideal for spraying inside
boxes, lockers etc or to prevent backache
when spraying floor cloths. Also a 200 mm right-angle extension
ideal for homesick submariners.
SATA Extension
code
list Tradeline
price
Straight 200 mm extension 1.6 mm
SATA154211 £248.10 £231.87
Right-angle 200 mm extension 1.6 mm SATA154294 £382.30 £357.29
Save
backache when
spraying floors!
HEAVY DUTY SPRING
Heavy Duty Spring If you are using your gun with
a BVD Pressurised Cup you may find that it dribbles a bit
even when the fluid control is off. This can be easily solved
by fitting a heavy-duty spring. These springs are already
fitted to 4 mm and 5 mm set-ups. Fits all guns except the
SATAminijet and SATAjet B 20.
Heavy Duty Spring
code
price
SATA4648
£7.90
T: 020 7703 9786
F: 020 7708 4189
www.flints.co.uk
1.71
OTHER SPRAY EQUIPMENT
SECTION
1
PRESSURE POTS & AGITATORS
My
favourite
toy.
SATA BVD Pressurised Cup Add
Pro Spray Gun An economical and serviceable
this cup to your SATA gun to enable it to spray
viscous materials. It easily copes with Rosco
Crystalgel and Weave Filler. It is ideal for large
splatter effects using viscous paints on vertical
surfaces when diluted paint would tend to run.
Use it to apply texture to built pieces. For large
jobs see the 24 L pot below. Use it with a SATA
4000, SATA 3000, SATA 1000 or SATA 100 guns.
4 Transforms your existing gun into a brand
new.tool for amazing textural effects
4 Brilliant and repeatable control
4 Watch our video on YouTube
gun suited to those who can’t warrant the extra
expenditure on the SATA guns. [1.4 mm nozzle].
1.72
code
SATA25775
price
£27.54
PSC Spray Gun Suited for smaller compressors
and cheaper than a week’s hire! Don’t expect the quality
of finish you would get with a SATA gun.
PSC Spray Gun
Tradeline
list
price
£244.20 £220.00
SATA 24 Litre Pressure
Pot in Stainless Steel We
have selected this pressure pot for
projects which require large quantities
of paint or viscous material to be
sprayed. It can be used to prime large
cloths or to spray materials such as
Rosco CrystalGel and Weave Filler 1047
and to add texture effects to cloths or
A
scenery. It can also spray any viscous
real time
paints to obtain heavy splattering
saver.
effects on vertical surfaces without
fear of the material running. This pot is suitable for water- or
oil-based materials and can be fitted to allow two guns to be operated
at the same time. If you are spraying materials which tend to settle,
the pot can be fitted with an automatic or manual agitator. These
pots are fitted with dual regulators for fine control of both air and
material pressure.
4 Dramatic time saving
4 Super fast spraying at unbelievable speeds
4 Ability to spray large quantities of many viscous materials
4 Two operators can work at the same time
4 Perfect control to obtain repeatable and even results
4 Ability to spray materials which would normally have to be hand
applied
Sata 24 L Pressure Pot
code
24 L Pressure pot
SATA177725
Surcharge for allowing second painter
SATA181990
6 m material & compressed air line supply sets SATA77834
10 m material & compressed air line supply sets SATA77842
15 m material & compressed air line supply sets SATA77859
[NOTE you will require 2 hose sets for twin gun set-up]
SATAjet 1000K Spray gun [2.5mm nozzle set]
SATA153486
[NOTE you will require 2 guns for twin gun set-up]
code
TOL811
code
TOL810
price
£19.95
AIR TEXTURE GUNS [HOPPER GUNS]
Please refer to Heavy Duty Springs on previous page.
Pressurised Cup
Pro Spray Gun
Tradeline
list
price
£1695.00 £1525.65
£251.90
£226.73
£206.80
£274.10
£335.60
Tradeline
£359.00 £287.20
Air Texture Gun
For frequent users
Graco Air Texture Gun For
frequent users. Double-handle design
provides maximum support and control for
ceiling, wall and floor applications. Sprays
textures such as Rosco Foamcoat and most
gravity-fed materials.
4 5.7 L hopper
4 Air spray trigger gun
4 Four nozzles [4, 6, 8 and 12 mm]
code
price
TOL245924
£128.00
Clarke Air Texture Gun For one-off
Air Texture Gun
For one-off jobs
jobs. High capacity unit for textured finishes. 7.8
L tough plastic hopper. 4 nozzles and 5 spray
patterns give 20 combinations. 450 offset
connector for spraying ceilings. Includes
instruction booklet with a truly alarming picture
of their hand model.
code
price
CLA5091120
£49.50
BLOW NOZZLES
Blow Nozzles Valuable tools in any
workshop for clearing away dust prior to
glueing or painting. Unlike vacuum
cleaners, blow guns can get ingrained dust
out of shakes and screwholes preventing
SATA Turbo Nozzle paint contamination. Useful for cleaning
machines and motors. Choose between: The handy pocket-sized SATA
Turbo Blow Nozzle with rubberised protection – just clip it onto the 9
mm air hose, twist the front part to adjust the air flow and blow off.
Fits 9 mm quick fittings. Alternatively, use the Long Nozzle Gun to get
into nooks and crannies. 1⁄4” BSP male thread connection.
Blow Nozzles
code
price
SATA Turbo nozzle
SATA133306
£23.20
Long nose gun
TOL825
£4.95
GRIT GUNS
SATA Grit-blasting Grit-blasting gun
Agitator Should the material that you are spraying be prone to
settle during the job it is possible to agitate the material in the
pressure pot either by hand or automatically with the air supply.
SATA Agitator
Compressed air agitator
Hand agitator for 24 L pot
Tradeline
code
list
price
SATA16477 £533.60 £480.28
SATA3525
£160.40
Flints, Queens Row, London, SE17 2PX
for small jobs complete with blasting tube with
6 mm carbide insert, material cup to hold around
1 L, and male 1/4” thread air connection.
TECHNICAL DATA Lifetime approx 500 hours. Wt: 0.8 kg. Material
grain size: 0.1 – 0.6 mm. Operating Pressure: 5 – 10 bar [73 – 150psi].
Grit-blasting Gun
code
price
SATA17335
£209.90
T: 020 7703 9786
F: 020 7708 4189
www.flints.co.uk
HAND SPRAYERS
AIRLESS SPRAY EQUIPMENT
Airless Spray Equipment
Spray
paint & textures
fast!
Kingfisher
Hand-held Mister Strong hand sprayers with a wide range of
applications such as applying flameproofing. We stock the popular and
economical Kingfisher 2 pint version and the extra robust Hozelock
Spraymist Sprayer.
code
SAFS4000
SAFHOZ4122
price
£4.25
£20.83
Hudson 2 Gallon [8 L] PumpLess
Sprayer Excellent value larger capacity sprayer
4 High quality finish
4 Virtually no overspray
4 Also for hire [page 4.06]
with a highly efficient pump which pressurises with
fewer strokes. So when they say “PumpLess” they
mean you pump fewer strokes rather than a
pumpless sprayer with no pump at all which would
be clever.
4 Our most popular big sprayer
Airless Spray Machine
M2300 [110 V]
M2900 [110 V]
Transformer for 240 V supply
[Twin outlet]
Hudson PumpLess Sprayer
8 L capacity
Mylands Airless Paint
White Emulsion
code
HUD27912
price
£35.88
Hudson Suprema Bak Pak
Sprayer Ideal for fireproofing large
areas.
4 Tough one-piece blow-moulded tank that
is translucent for viewing the liquid level
4 Large easy-fill opening
4 Corrosion resistant piston pump
4 Roto-valve on/off control rotates
360° for up or down spraying with no
bending or wrist twisting
Hudson Bak Pak Sprayer
15 L capacity
code
HUD63184
price
£69.99
Professional X-Pert Sprayer
Built for the finest performance and ease
of use, extra rugged and dependable. Heavy
gauge stainless steel, 390 mm brass pump
with locking T handles, built-in pressure
gauge and pressure relief valve, in-line
strainer, Kem Oil hose and more. Makes a
first class paint sprayer. Widely used in
America for painting large cloths. Can also
be used to power spray guns.
Professional X-Pert Sprayer
11.4 L capacity [rec. refill 9.5 L]
code
HUD93793
For cleaning, use Mylands Spray Gun Cleaner [page 1.46].
Flints, Queens Row, London, SE17 2PX
price
£298.95
4 Very quick and efficient
4 Other versions available
code
list
PATM2300110V
PATM2900110V
TOLCM10002
£84.73
code
MYL040
Tradeline
price
£1,250.00
£1,595.00
£65.00
10 L
£41.98
DUSTING TOOLS
Dustin-Mizer A handcranked dust blower ideal for
applying Fuller’s Earth or
walnut dust to set dressings.
Fllints also hires dusters [page 4.09].
Dustin-Mizer
code
Dustin-Mizer (excluding deflector) PATDM1085
Deflector (to direct upwards)
PATDM1094
price
£49.95
£7.90
Hudson Dusting Tool For
applying Fuller’s Earth or walnut
dust to set dressings or for talcing
the backs of cut cloths so they don’t stick together when flaked.
Dusting Tool 454 g capacity
code
price
HUD96766
£18.33
STORAGE
Special Spray
Gun Storage
To keep your spray
equipment organised
we can make these
foam inserts which
will neatly fit your
SATA spray gun and can be used with the
Festool Systainer System. The larger box is perfect for storing hoses,
spare fittings etc. These boxes simply clip together and can be carried
as one. When ordering please specify the version of spray gun to be
stored in the box.
Tradeline
Storage Box and Foam Insert
code
price
Spray Gun Box [SYS 2 TL] no foam insert
FES497564
£37.53
Spray Equipment Box [SYS4]
FES497566
£43.69
Foam insert for SYS 2 TL box cut to fit gun
FHS400
£25.00
T: 020 7703 9786
F: 020 7708 4189
www.flints.co.uk
1
Hand-held Mister
Kingfisher Economy [1.5 L]
Hozelock Spraymist Sprayer [1.25 L]
SECTION
Hozelock
For extremely rapid spraying of large
areas nothing compares with airless
equipment. Choose the M2300 unit
for rapid priming of large cloths,
spraying interiors of theatres or
warehouses. Choose the M2900 unit
for spraying Flints Mud, Flintex,
Idenden Brushcote and Spraycote.
TECHNICAL DATA M2300 110 V unit delivers 3,300
psi with a maximum tip size of 23 thou. Max Flow
Rate 2 L/min. Wt: 32 kg. M2900 110 V unit
delivers 3,300 psi with a maximum tip size of 29
thou. Max Flow Rate: 3.3 L/min. Wt: 43 kg.
o Both supplied with 15 m hose, gun
and tip.
1.73