Seiko TM-T90 Product manual

EPSON OPOS ADK MANUAL
APPLICATION DEVELOPMENT
GUIDE
POSPrinter (TM-T90)
Version 2.61
Feb. 2008
Notes
(1) Reproduction of any part of this documentation by any means is prohibited.
(2) The contents of this documentation are subject to change without notice.
(3) Comments and notification of any mistakes in this documentation are gratefully
accepted.
(4) This software cannot be used with other equipment that the specified.
(5) EPSON will not be responsible for any consequences resulting from the use of any
information in this documentation.
Trademarks
Microsoft®, Windows®, Windows Vista™, Visual Basic® and Visual C++® are trademarks
or registered trademarks of Microsoft Corporation in the United States and/or other
countries.
EPSON® and ESC/POS® are registered trademarks of SEIKO EPSON CORPORATION.
Other product and company names used herein are for identification purposes only and
may be trademarks or registered trademarks of their respective companies.
Copyright © 2000-2008 SEIKO EPSON CORPORATION
Version 2.61
Feb. 2008
Contents
SECTION 1. INTRODUCTION ......................................................................................1
SECTION 2. DETAILS ON SETTINGS .........................................................................2
2.1 References of Firmware Versions ..............................................................................2
2.2 Settings of DIP Switches ............................................................................................2
2.3 Port Information..........................................................................................................4
2.4 Device Settings ............................................................................................................6
2.4.1 Usable Device Specific Settings ..........................................................................6
2.4.2 Paper Type Setting...............................................................................................7
2.4.3 Paper Width Setting.............................................................................................7
SECTION 3. FUNCTION DETAILS ..............................................................................8
3.1 Property Set Values and Default Values ..................................................................8
3.1.1 Capability Set Values...........................................................................................8
3.1.2 List Properties ....................................................................................................10
3.1.3 Width and Height Properties ............................................................................11
3.1.4 Common Property Strings .................................................................................12
3.1.5 PageMode Print Properties ...............................................................................12
3.2 Methods......................................................................................................................13
3.3 Escape Sequences......................................................................................................14
3.4 Printable Barcode Type ............................................................................................15
3.5 Power Condition Reports..........................................................................................15
3.6 Synchronous Processing ...........................................................................................15
3.7 Printing Positions .....................................................................................................16
3.8 Electronic Logo Function (NVRAM)........................................................................16
3.9 Printable Bitmap Types and Sizes ..........................................................................17
3.10 Color Bitmap Printing ............................................................................................17
3.11 Maintenance Counter .............................................................................................18
3.12 Automatic Recovery Function ................................................................................18
3.13 Output without Flow Control on the USB/Ethernet Interfaces..........................18
SECTION 4. WARNINGS .............................................................................................19
iii
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T90)
Version 2.61
Feb. 2008
Section 1. Introduction
This manual describes the method of use and related items, as well as machine-specific
precautions, when the EPSON TM-T90 Series POS Printers are used with the EPSON
OPOS ADK program.
This manual applies to the following devices.
Device List
Serial
Parallel
USB
Ethernet
TM-T90
TM-T90M
TM-T90P
TM-T90PM
TM-T90U
TM-T90MU
TM-T90E
TM-T90ME
Before reading the manual, see the following explanation about the characteristic of the
TM-T90 models.
Station: Receipt (Line Thermal 180 dpi X 180 dpi)
2-Color Printing
Throughout the manual, the various model names will be referred to as TM-T90.
Compatibility mode
The compatibility mode for upward compatibility was added in OPOS Ver2.60.
For the details of the compatibility mode, please refer to “EPSON OPOS ADK MANUAL
APPLICATION DEVELOPMENT GUIDE Compatibility Mode”.
1
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T90)
Version 2.61
Feb. 2008
Section 2. Details on Settings
This section describes connection configurations and how to make the settings for the
TM-T90 printers.
2.1 References of Firmware Versions
Refer to the release notes (Relnote.txt).
2.2 Settings of DIP Switches
Confirm that the following settings have been made correctly.
1) Serial port
DIP-SW1
No.
DIP-SW2
Setting
No.
1
OFF
Settable
2
ON
Settable
3
OFF
Fixed at OFF
4
OFF
Fixed at OFF
5
OFF
Settable
6
OFF
Settable
7
ON
Settable
8
OFF
Settable
1
Setting
OFF
Fixed at OFF
Set DIP-SW1-1 (Power button function).
If this DIP Switch is ON, the power button is disabled.
Set DIP-SW1-2 (Interface condition selection).
If this DIP Switch is ON, communications settings are set via DIP Switches. If the
DIP Switch is OFF, Memory Switches are used.
Set DIP-SW1-3 (Handshake) to DTR/DSR.
Set DIP-SW1-4 (Bit length) to 8 bits.
Set DIP-SW1-5 to DIP-SW1-8 accordance with the port information.
The described set values are the default values. For the details, refer to the
product manual of the POSPrinter. Also, if these settings are changed, make
sure to change the port information using the SetupPOS utility.
2
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T90)
Version 2.61
Feb. 2008
Do not change the current settings of DIP-SW2-1.
2) Parallel Port
DIP-SW1
No.
DIP-SW2
Setting
No.
1
OFF
Settable
2
OFF
Fixed at OFF
3
OFF
Fixed at OFF
4
OFF
Fixed at OFF
5
OFF
Fixed at OFF
6
OFF
Fixed at OFF
7
OFF
Fixed at OFF
8
OFF
Fixed at OFF
1
Setting
OFF
Fixed at OFF
Set DIP-SW1-1 (Power button function).
If this DIP Switch is ON, the power button is disabled.
Do not change the current settings of DIP-SW2-1.
Make other settings in accordance with the settings described above.
3) USB Port
DIP-SW1
No.
DIP-SW2
Setting
No.
1
OFF
Settable
2
OFF
Fixed at OFF
3
OFF
Fixed at OFF
4
OFF
Fixed at OFF
5
OFF
Fixed at OFF
6
OFF
Fixed at OFF
7
OFF
Fixed at OFF
8
OFF
Fixed at OFF
1
Setting
OFF
Set DIP-SW1-1 (Power button function).
If this DIP Switch is ON, the power button is disabled.
Do not change the current settings of DIP-SW2-1.
3
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T90)
Fixed at OFF
Version 2.61
Feb. 2008
Make other settings in accordance with the settings described above.
4) Ethernet Port
DIP-SW1
DIP-SW2
No.
Setting
1
OFF
Settable
2
OFF
Fixed at OFF
3
OFF
Fixed at OFF
4
OFF
Fixed at OFF
5
OFF
Fixed at OFF
6
OFF
Fixed at OFF
7
OFF
Fixed at OFF
8
OFF
Fixed at OFF
No.
Setting
1
OFF
Fixed at OFF
Set DIP-SW1-1 (Power button function).
If this DIP Switch is ON, the power button is disabled.
Do not change the current settings of DIP-SW2-1.
Make other settings in accordance with the settings described above.
2.3 Port Information
1) Port information when serial port is used
The port information that can be set with the SetupPOS utility is as follows.
Item
Setting range
2400,4800,9600,19200,38400 *1,
Baud rate [bps]
57600 *1,115200 *1
*1
Bit length [bit]
8
Parity
NONE, ODD, EVEN
Stop bit [bit]
1
Handshake
DTR/DSR
Output buffer length [byte]
32 to 1024
Output interval time [ms]
0 to 9999
These Baud rate require setting via Memory Switch.
4
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T90)
Version 2.61
Feb. 2008
The default settings are as shown in the following table.
Item
Setting range
Baud rate [bps]
19200
Bit length [bit]
8
Parity
NONE
Stop bit [bit]
1
Handshake
DTR/DSR
Output buffer length [byte]
1024
Output interval time [ms]
2500
2) Port information when using parallel port
The port information that can be set with the SetupPOS utility is as follows.
Item
Setting range
Output buffer length [byte]
32 to 1024
Output interval time [ms]
0 to 9999
The default settings are as shown in the following table.
Item
Setting range
Output buffer length [byte]
1024
Output interval time [ms]
2500
3) Port information when using USB port
The port information that can be set with the SetupPOS utility is as follows.
Item
Setting range
Output interval time [ms]
0 to 9999
The default setting is as shown in the following table.
Item
Setting range
Output interval time [ms]
2500
5
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T90)
Version 2.61
Feb. 2008
4) Port information when using Ethernet port
The port information that can be set with the SetupPOS utility is as follows.
Item
Setting range
Output buffer length [byte]
32 to 1024
Output interval time [ms]
0 to 9999
The default settings are as shown in the following table.
Item
Setting range
Output buffer length [byte]
1024
Output interval time [ms]
2500
2.4 Device Settings
The following explanation is about the settings for TM-T90.
2.4.1 Usable Device Specific Settings
For the TM-T90, the following device specific settings are settable by the
SetupPOS utility. For the detail, please refer to the Section 2 of “EPSON OPOS
ADK MANUAL APPLICATION DEVELOPMENT GUIDE POSPrinter (TM
Series)”.
Tab
General
Settings
Disable panel buttons
Assume print complete when data output finishes
Ignore firmware version check
Homogenize Error Codes
Output complete timeout
Paper
Paper Type
Paper Width [mm]: LineWidth [dot]: LineCharsList
Bitmap
TMFlogo...
Color Bitmap
Method
Brightness
Primary
Secondary
6
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T90)
Version 2.61
Status Log
Feb. 2008
ERROR
OFFLINE
Log file name (include full path)
Maximum file size [KB]
Default Value
*1
*1
Multilingual font
Available only for the Multilingual character model.
2.4.2 Paper Type Setting
The TM-T90 models support the following paper type. After adding the TM-T90
by the SetupPOS utility, open the “Device Specific Settings” dialog box. In the
“Paper” tab the paper type could be selected..
The settable paper types are as follows:
Normal
2-Color Thermal
The default paper type is set to Normal.
2.4.3 Paper Width Setting
The TM-T90 models support the following paper width. After adding the TM-T90
by the SetupPOS utility, open the “Device Specific Settings” dialog box. In the
“Paper” tab the paper width could be selected..
The settable paper widths are as follows:
79.5 mm [512 dots]
59.5 mm [384 dots]
57.5 mm [360 dots]
The default paper width is set to 79.5 mm.
7
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T90)
Version 2.61
Feb. 2008
Section 3. Function Details
This section describes the functions of the TM-T90 printers in details. Supplementary
explanation of the parts not described in detail in the "UPOS" is also given here.
3.1 Property Set Values and Default Values
The following explanation is about the property set values and the default values.
3.1.1 Capability Set Values
The following values are the Capability set values.
Capability Name
Set Value
CapTransaction
CapCoverSensor
CapConcurrentRecSlp
CapConcurrentJrnSlp
CapConcurrentJrnRec
CapConcurrentPageMode
CapCharacterSet
CapMapCharacterSet
CapJrnUnderline
CapJrnNearEndSensor
CapJrnItalic
CapJrnEmptySensor
CapJrnDwideDhigh
CapJrnDwide
CapJrnDhigh
CapJrnColor
CapJrnCartridgeSensor
CapJrnBold
CapJrn2Color
CapJrnPresent
CapRecPageMode
CapRecUnderline
CapRecStamp
CapRecRotate180
CapRecRight90
CapRecPapercut
CapRecNearEndSensor
TRUE
TRUE
FALSE
FALSE
FALSE
FALSE
PTR_CCS_ASCII *1
FALSE
FALSE
FALSE
FALSE
FALSE
FALSE
FALSE
FALSE
0
0
FALSE
FALSE
FALSE
TRUE
TRUE
FALSE
TRUE
TRUE
TRUE
TRUE
8
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T90)
Version 2.61
CapRecMarkFeed
CapRecLeft90
CapRecItalic
CapRecEmptySensor
CapRecDwideDhigh
CapRecDwide
CapRecDhigh
CapRecColor
Feb. 2008
0
TRUE
FALSE
TRUE
TRUE
TRUE
TRUE
PTR_COLOR_PRIMARY
PTR_COLOR_CUSTOM1 *2
0
TRUE
TRUE
TRUE
TRUE *2
TRUE
FALSE
FALSE
FALSE
FALSE
FALSE
FALSE
FALSE
FALSE
FALSE
FALSE
0
0
FALSE
FALSE
FALSE
FALSE
FALSE
FALSE
FALSE
FALSE
CapRecCartridgeSensor
CapRecBold
CapRecBitmap
CapRecBarCode
CapRec2Color
CapRecPresent
CapSlpUnderline
CapSlpRotate180
CapSlpRight90
CapSlpNearEndSensor
CapSlpLeft90
CapSlpItalic
CapSlpEmptySensor
CapSlpDwideDhigh
CapSlpDwide
CapSlpDhigh
CapSlpColor
CapSlpCartridgeSensor
CapSlpBothSidesPrint
CapSlpBold
CapSlpBitmap
CapSlpBarCode
CapSlp2Color
CapSlpFullslip
CapSlpPresent
CapSlpPageMode
*1
If Multilingual character model, “PTR_CCS_KANJI” is set.
*2
Accordance with the selected paper in the SetupPOS utility, the set value will differ.
When selecting Normal Paper (Default), two colors print cannot be executed.
9
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T90)
Version 2.61
Feb. 2008
3.1.2 List Properties
The List Properties are explained in the following.
List Property
Settings
CharacterSetList
"255,437,850,852,858,860,863,865,866,998,999,
1252" *1
JrnLineCharsList
“”
RecLineCharsList
“42,56”
(When 79.5 mm is set)
RecLineCharsList
“32,42”
(When 59.5 mm is set)
RecLineCharsList
“30,40”
(When 57.5 mm is set)
SlpLineCharsList
“”
RecBarCodeRotationList
“0,R90, L90, 180”
RecBitmapRotationList
“0,R90, L90, 180”
SlpBarCodeRotationList
“”
SlpBitmapRotationList
“”
FontTypefaceList
“”
*1
If Multilingual character model, “936” or “950” is added to the list.
10
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T90)
Version 2.61
Feb. 2008
3.1.3 Width and Height Properties
The width and height properties are explained in the following.
Settings
Property
Default
Maximum
Minimum
Value
value [dot]
value [dot]
RecLineSpacing
30
127
24 *1
JrnLineSpacing
X
X
X
SlpLineSpacing
X
X
X
SlpLineHeight [dot]
X
RecLineHeight [dot]
24,17
JrnLineHeight [dot]
X
SlpLineWidth [dot]
X
RecLineWidth [dot]
512
(When 79.5 mm is set)
RecLineWidth [dot]
384
(When 59.5 mm is set)
RecLineWidth [dot]
360
(When 57.5 mm is set)
JrnLineWidth [dot]
X
RecSidewaysMaxLines
17 *3
RecSidewaysMaxChars
138 *4
(When Font A is selected)
184 *4
RecSidewaysMaxChars
(When Font B is selected)
RecLinesToPaperCut
5 *2
SlpSidewaysMaxLines
X
SlpSidewaysMaxChars
X
SlpMaxLines
X
X: No settings
*1
In the case of a line thermal station, the Line Spacing setting is identical with the height
of the characters which means that it can be set at up to 17 when Font B is selected.
*2
It can be changed by the settings of the RecLineSpacing or the character height.
*3
It can be changed by the settings of the RecLineSpacing or the RecLineHeight.
The value differs accordance with the selected paper width.
*4
It can be changed by the settings of the font width, or the selected paper type.
11
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T90)
Version 2.61
Feb. 2008
3.1.4 Common Property Strings
The Device information properties are described below.
I/F
S
DeviceName
DeviceDescription
TM-T90
TM-T90M
TM-T90P
TM-T90PM
TM-T90U
TM-T90MU
TM-T90E
TM-T90ME
P
U
E
EPSON TM-T90 POS Printer
EPSON TM-T90M POS Printer
EPSON TM-T90P POS Printer
EPSON TM-T90PM POS Printer
EPSON TM-T90U POS Printer
EPSON TM-T90MU POS Printer
EPSON TM-T90E POS Printer
EPSON TM-T90ME POS Printer
I/F indicate the connected interface.
The following is the list of the four connecting interfaces.
S: Serial
P: Parallel
U: USB
E: Ethernet
3.1.5 PageMode Print Properties
The Device information properties are described below.
Property
Station *2
Journal
Receipt
Slip
PageModeArea
-
-
PageModeDescriptor *1
-
(monochrome)
(80.0mm)“512”, “831”
(60.0mm)“384”, “831”
(58.0mm)“384”, “831”
(2-color)
(80.0mm)“512”, “415”
(60.0mm)“384”, “415”
(58.0mm)“360”, “415”
BM/BC/BMR/BCR
*1
-
Following setting values are used for the PageModeDescriptor property.
BM
: Bitmap printing is available.
BC
: Barcode printing is available.
BMR : Rotated printing of bitmap is available.
BCR : Rotated printing of barcode is available.
*2
If the Station’s CapRecPageMode property value is FALSE, the PageModeArea property
shall have ” ” and the PageModeDescriptor property shall have ”0” respectively as a
setting value.
12
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T90)
Version 2.61
Feb. 2008
3.2 Methods
The following explanation is about supported/unsupported Methods, and the
detailed information.
Method
Supported/Unsupported
Compatibility with the
PageMode printing
PrintNormal
PrintTwoNormal
PrintImmediate
PrintBarCode
PrintBitmap
PrintMemoryBitmap
CutPaper
O
X
O
O
O
O
O (1~100: One point remains
uncut / Full cut *1)
X
X
O
O
O
O
O
X
X
X
X
O
O
O
X
O *2
O *3
O *4
O *4
X
MarkFeed
ChangePrintSide
ValidateData
TransactionPrint
SetLogo
SetBitmap
RotatePrint
EndRemoval
BeginRemoval
EndInsertion
BeginInsertion
ClearPrintArea
PageModePrint
X
X
O
O
O
O
X
X
X
X
X
O
O
O: Supported
X: Unsupported
*1
*2
Full cut (completely cut) is possible as a dealer option.
If the specified Station is ready to print, the printing data shall not be stored in the
PageMode printing buffer but, instead, go straight to printing. If the Station is not
ready to print, an error is returned.
*3
If other than “LEFT” is specified for the printing position of barcode, the printing shall
be done, regardless of the PageModeHorizontalPosition property setting, based on the
PageModePrintArea property setting in the horizontal direction.
*4
If other than “LEFT” is specified for the printing position of bitmap, the printing shall
be done, regardless of the PageModeHorizontalPosition property setting, based on the
PageModePrintArea property setting in the horizontal direction.
13
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T90)
Version 2.61
Feb. 2008
3.3 Escape Sequences
The following figure is about supported/unsupported Escape Sequences.
Escape Sequence
Receipt
Compatibility with the
PageMode printing
#P
#fP
#sP
sL
#B
tL
bL
#R
#lF
#uF
#rF Maximum [inch]
#E
#fT
bC
!bC
#uC
iC
!iC
#rC
rvC
!rvC
#sC
#fC
tbC
!tbC
tpC
!tpC
1C
2C
3C
4C
#hC
#vC
cA
rA
lA
N
0~100
0~100
X
X
O
O
O
O
0~9999
0~ approx. 50 cm
X
0~65535
X
O
O
1~2
X
X
1~2 *1
O
O
X
X
X
X
X
X
O
O
O
O
1~8
1~8
O
O
O
O
O : Supported
X : Unsupported
14
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T90)
X
X
X
X
O
O
O
O
O
O
X
X
X
O
O
O
X
X
O
O
O
X
X
X
X
X
X
O
O
O
O
O
O
O *2
O *2
O
O
Version 2.61
Feb. 2008
Numbers: Settable range
*1 When selected paper is Normal Paper, its settable range is 1.
*2 Regardless of the PageModeHorizontalPosition property setting, center or right adjust
what is to be printed based on the PageModePrintArea property setting in the horizontal
direction.
3.4 Printable Barcode Type
The TM-T90 models allow the following barcode types.
Code 128
Code 128 Parsed
Code 93
Codabar
ITF
Code 39
JAN 13 (EAN 13)
JAN 8 (EAN 8)
UPC-E
UPC-A
PDF 417
For the PDF 417 type, the maximum height is limited to 831 dots for 2-color
thermal paper, 1662 dots for normal thermal paper.
3.5 Power Condition Reports
The TM-T90 models support Power Condition Reports as follows.
Powered on reporting: Supported
Powered off reporting: Supported
3.6 Synchronous Processing
The TM-T90 models support the Process ID for the Synchronous Processing.
15
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T90)
Version 2.61
Feb. 2008
3.7 Printing Positions
The TM-T90 models support the function for setting printing position.
Function
Receipt
Left margin
Printing Position
O
O
O: Supported
X : Unsupported
When the left margin setting function is supported, it is possible to specify the
horizontal printing position of the bitmap or barcode by dots unit.
When the printing position settings are supported, it is possible to specify the
horizontal printing position of the text, bitmap, or the barcode to the left, center, or
the right side of the paper.
3.8 Electronic Logo Function (NVRAM)
The TM-T90 models feature a function for electronic logo. To use the electronic
logo function (NVRAM), start “TMFlogo utility” from the “Device Specific Settings”
of SetupPOS utility, and register image files (BMP style) at the function in
advance.
For the details of the registration, please refer to the “Help” of
“TMFlogo utility” and/or “EPSON OPOS ADK MANUAL User’s Manual TMFlogo
Utility”.
To print the registered image file, please use the following DirectIO.
PTR_DI_FLASH_BITMAP
PTR_DI_FLASH_BITMAP2
For the details of the printing, please refer to the Section 4 of “EPSON OPOS
ADK APPLICATION DEVELOPMENT GUIDE POSPrinter (TM Series)”. The
available NVRAM size for the TM-T90 is 393216 bytes.
16
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T90)
Version 2.61
Feb. 2008
3.9 Printable Bitmap Types and Sizes
The TM-T90 models support the following bitmap commands. For the detail,
please refer to the Section 3 of “EPSON OPOS ADK MANUAL APPLICATION
DEVELOPMENT GUIDE POSPrinter (TM Series)”. The allowance ranges for
bitmaps are as follows.
Bitmap command type
Download bitmap
Allowance range
x (x x 8 dots)
y (y x 8 dots)
xy
1~2040
1~384
Receipt:
<= 98304
Raster bitmap
1~1024
1~4095
Color bitmap
1~1024
(TM^T90)
1~415
(TM^T90M)
1~369
Even if meet with the limitation described above, a bitmap that extend the
paper width cannot be printed.
When a height of the raster bitmap expands the value described above, the
SO (Service Object) will automatically separates the bitmap data into
multiple bitmaps, then print the multiple bitmaps data as one connected
bitmap.
3.10 Color Bitmap Printing
The TM-T90 models support color bitmap printing.
If a 16-color or a 256-color bitmap file is supplied, the image may be printed
using 2 colors. If the original file is a 2-color bitmap, it will be printed in
monochrome. The halftone method may be set using the “Device Specific
Settings” dialog box.
To print an image using 2 colors, 2-color thermal paper must be selected in the
“Device Specific Settings” dialog box and 2-color thermal receipt paper must be
supplied in the printer.
17
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T90)
Version 2.61
Feb. 2008
3.11 Maintenance Counter
The TM-T90 models feature a maintenance counter function for retaining an
operation log of the printer. The following chart shows the available maintenance
counters for the TM-T90.
Counter number
Counter
Unit
Max. Value
Hexadecimal
14
Counter
Type
Paper feed in number of
Lines
143,165,576
Resettable
Times
4,294,967,295
Resettable
Times
4,294,967,295
Resettable
lines: Roll paper
15
Number of head
energizations: Roll paper
32
Number of auto-cutter
operations
46
Uptime of product
Hours
71,582,788
Resettable
94
Number of paper feed
Lines
143,165,576
Cumulative
Times
4,294,967,295
Cumulative
Times
4,294,967,295
Cumulative
Hours
71,582,788
Cumulative
lines: Roll paper
95
Number of head
energizations: Roll paper
B2
Number of auto-cutter
operations
C6
Uptime of product
3.12 Automatic Recovery Function
The TM-T90 models feature a function for automatic recovery when the power is
turned on again after an interruption of power. Recovery processing is performed
automatically when the printer’s power is turned on again after an interruption.
The recovery processing restores the printer to the condition it was in before the
power was turned off.
3.13 Output without Flow Control on the USB/Ethernet Interfaces
The TM-T90 models support outputting without flow control on the USB/Ethernet
interfaces.
18
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T90)
Version 2.61
Feb. 2008
Section 4. Warnings
This section describes precautions in use of TM-T90.
•
If 2-color thermal paper is selected from the “Device Specific settings” dialog box,
2-color thermal receipt paper must be used in the printer.
•
When parallel I/F is used with Windows 2000, Windows XP or Windows Vista,
please set Busy Condition of Memory SW1-3 to "ON" (Buffer full).
19
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T90)