Electrolux E36GC75DSS Specifications

2 Finding Information
MAKE A RECORD FOR FUTURE USE
Brand_______________________________________________________________
Purchase Date______________________________________________________
Model Number______________________________________________________
Serial Number______________________________________________________
NOTE
The serial plate is located under the burner box.
QUESTIONS?
For toll-free telephone support in the U.S. and Canada:
1-877-4ELECTROLUX (1-877-435-3287)
For online support and internet product information:
www.electrolux.com
©2003 Electrolux Home Products, Inc.
Post Office Box 212378, Augusta, Georgia 30917, USA
All rights reserved. Printed in the USA
Finding Information
TABLE OF CONTENTS
Finding Information ........................................... 2
Make a Record for Future use .......................... 2
Questions? ........................................................ 2
Safety ................................................................... 4
Important Safety Instructions .............................. 4
Getting Start ........................................................ 7
Grounding Instructions ....................................... 7
Liquefied Petroleum (Propane)
Gas Conversion ................................................ 7
Surface Cooking ................................................. 8
Flame Size ........................................................ 8
Proper Burner Adjustments ................................ 8
Locations of the Burners .................................... 8
Placement of Burner Heads and Caps ............... 9
Placement of Burner Grates ............................... 9
Surface Cooking Utensils ................................. 10
Using the Griddle ............................................. 10
Using the Wok Stand ........................................ 11
Using the Simmer Plate .................................... 12
Setting Surface Controls ................................... 13
General Care & Cleaning .................................. 14
Care & Cleaning Table .................................... 14
Cleaning the Burner Grates, Burner Caps,
Burner Heads, Simmer plate and Griddle ........ 15
Cooktop Cleaning and Maintenance ................ 16
Cleaning Recommendations for the
Ceramic Glass Cooktop ................................... 16
Care & Cleaning of Stainless Steel ................... 17
Solutions to Common Problems ..................... 18
Surface Burner Do Not Light ........................... 18
Burner Flame Only Lights Half
Way Around Burner ........................................ 18
Burner Flame is Orange .................................. 18
Scratches or Abrasions on Ceramic
Glass Cooktop Surface .................................... 19
Metal Marks on Ceramic Glass
Cooktop Surface .............................................. 19
Brown Streaks and Specks on Ceramic Glass
Cooktop Surface .............................................. 19
Areas of Discoloration on Ceramic
Glass Cooktop Surface .................................... 19
Warranty Information ....................................... 20
3
4 Safety
IMPORTANT SAFETY INSTRUCTIONS
Please read all safety instructions before using your new Electrolux cooktop.
!
WARNING
To reduce the risk of fire, electrical shock, or injury when using your gas cooktop, follow basic
precautions including the following:
!
WARNING
If the information in this manual is not followed exactly, a fire or explosion may result
causing property damage, personal injury or death.
FOR YOUR SAFETY:
— Do not store or use gasoline or other flammable vapors and liquids in the vicinity
of this or any other appliance.
— WHAT TO DO IF YOU SMELL GAS:
• Do not try to light any appliance.
• Do not touch any electrical switch; do not use any phone in your building.
• Immediately call your gas supplier from a neighbor's phone. Follow the gas
supplier's instructions.
• If you cannot reach your gas supplier, call the fire department.
— Installation and service must be performed by a qualified installer, servicer or the
gas supplier.
• Remove all tape and packaging before using the Cooktop. Destroy the carton and plastic bags
after unpacking the cooktop. Never allow children to play with packaging material. Do not remove
the model/serial plate attached to the cooktop.
• Proper Installation-Be sure your appliance is properly installed and grounded by a qualified
technician in accordance with the National Fuel Gas Code ANSI Z223.1—latest edition in the
United States, or in Canada CAN/CGA B149.1, and CAN/CGA B149.2, and the National Electrical
Code ANSI/NFPA No. 70—latest edition in United States, or in Canada CSA Standard C22.1,
Canadian Electrical Code, Part 1, and local code requirements. Install and/or adjust only per
installation instructions provided in the literature package for this cooktop.
Ask your dealer to recommend a qualified technician and an authorized repair service. Know how to shut
off gas supply at the meter and disconnect the electrical power to the cooktop at the circuit breaker or
fuse box in case of an emergency.
• User servicing—Do not repair or replace any part of the appliance unless specifically recommended
in the manuals. All other servicing should be done only by a qualified technician, This may reduce the
risk of personal injury and damage to the cooktop.
• Never modify or alter the construction of a cooktop by removing panels, wire covers or any other
part of the product.
!
CAUTION
Do not store items of interest to children in the cabinets above the cooktop. Children climbing
on the cooktop to reach items could be seriously injured.
Safety
!
WARNING
• Stepping, leaning or sitting on this cooktop can result in serious injuries and also cause damage
to the cooktop. Do not allow children to climb or play around the cooktop.
• Never use your appliance for warming or heating the room.
• Storage on Appliance—Flammable materials should not be stored on the cooktop or near
surface units. This includes paper, plastic and cloth items, such as cookbooks, plasticware and
towels, as well as flammable liquids. Do not store explosives, such as aerosol cans, on or near
the cooktop. Flammable materials may explode and result in fire or property damage.
• Do Not Leave Children Alone—Children should not be left alone or unattended in the area where
appliance is in use. They should never be allowed to sit or stand on any part of the appliance.
• DO NOT TOUCH SURFACE BURNERS/UNIT, GRATES OR AREAS NEAR THESE BURNERS/UNIT.
Surface burners/unit may be hot even though flames are not visible/ unit is dark in color. Areas near
surface burners/unit may become hot enough to cause burns. During and after use, do not touch,
or let clothing or other flammable materials touch these areas until they have had sufficient time to
cool. Among these areas are the cooktop and surfaces facing the cooktop.
• Wear Proper Apparel—Loose-fitting or hanging garments should never be worn while using the
appliance. Do not let clothing or other flammable materials contact hot surfaces.
• Do Not Use Water or Flour on Grease Fires—Smother the fire with a pan lid, or use baking soda,
a dry chemical or foam-type extinguisher.
• When heating fat or grease, watch it closely. Fat or grease may catch fire if allowed to become too hot.
• Use Only Dry Potholders—Moist or damp potholders on hot surfaces may result in burns from
steam. Do not let potholders touch hot heating elements, the flame or burners. Do not use a towel
or other bulky cloth instead of a potholder.
• Do Not Heat Unopened Food Containers—Buildup of pressure may cause container to burst and
result in injury.
IMPORTANT SAFETY INSTRUCTIONS FOR USING YOUR COOKTOP
!
WARNING
Use Proper Flame Size—Adjust flame size so it does not extend beyond the edge of the utensil. The use
of undersized utensils will expose a portion of the burner flame to direct contact and may result in ignition of clothing.
Proper relationship of utensil to flame will also improve efficiency.
• Know which knob controls each surface burner/surface unit. Place a pan of food on the burner
before turning it on, and turn the burner off before removing the pan.
• Always turn knob to the full LITE position when igniting top burners. Visually check that burner has
lit. Then adjust the flame so it does not extend beyond the edge of the utensil.
• Use proper pan size. This cooktop can be equipped with one or more surface units of different sizes.
Select utensils having flat bottoms large enough to cover the surface unit. The use of
undersized utensils will expose a portion of the surface heating unit to direct contact and may result
in ignition of clothing. Proper relationship of utensil to the surface unit will also improve efficiency.
5
6 Safety
• Utensil Handles Should Be Turned Inward and Not Extend Over Adjacent Surface Burners/Unit
—To reduce the risk of burns, ignition of flammable materials, and spillage due to unintentional
contact with the utensil, the handle of the utensil should be positioned so that it is turned inward,
and does not extend over adjacent surface burners.
• Never Leave Surface Burners/Unit Unattended at High Heat Settings—Boilovers cause smoking
and greasy spillovers that may ignite, or a pan that has boiled dry may melt.
• Protective Liners—Do not use aluminum foil to line any part of the cooktop, use aluminum foil only
to cover food during cooking. Improper installation of these liners may result in risk of electric shock,
or fire.
• Glazed Cooking Utensils—Only certain types of glass, glass/ceramic, ceramic, earthenware, or
other glazed utensils are suitable for cooktop service without breaking due to the sudden change
in temperature. Check the manufacturer’s recommendations for cooktop use.
• Do not use Searing Grill on the cooktop. The Searing Grill is not designed for use on the cooktop.
Doing so may result in a fire.
!
WARNING
Do Not Use Stove Top Grills on Your Sealed Gas Burners—If you use a stove top grill on a sealed gas burner, it will cause
incomplete combustion and can result in exposure to carbon monoxide levels above allowable current standards. This can be
hazardous to your health.
Do Not Use Decorative Surface Burner/Unit Covers. If a burner/unit is accidentally turned on, the
decorative cover will become hot and possibly melt. You will not be able to see that the burner/unit
is on. Burns will occur if the hot covers are touched. Damage may also be done to the cooktop or
burners/unit because the covers may cause overheating. Air will blocked from the burner/unit and
cause combustion problems.
IMPORTANT INSTRUCTIONS FOR USING YOUR GLASS COOKTOP
• Do Not Operate or Clean a Broken Cooktop Glass.—If glass top should break, cleaning solutions
and spillovers may penetrate the broken cooktop and create a risk of electric shock. Contact a
qualified technician immediately.
• Clean Cooktop Glass with Caution.—If a wet sponge or cloth is used to wipe spills on a hot cooking
area, be careful to avoid a steam burn. Some cleaners can produce harmful fumes if applied to a
hot surface.
• Avoid Scratching the Cooktop Glass with Sharp Objects.
IMPORTANT SAFETY NOTICE
The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of California to
publish a list of substances known to the state to cause cancer, birth defects or other reproductive
harm, and requires businesses to warn customers of potential exposure to such substances.
NOTE
Save these important safety instructions for future reference.
Getting Start
7
GROUNDING INSTRUCTIONS
For personal safety, the cooktop must be properly grounded. For
maximum safety, the power cord must be plugged into an
electrical outlet that is correctly polarized and properly grounded.
DO NOT operate the cooktop using a 2-prong adapter or an
extension cord. If a 2-prong wall receptacle is the only available
outlet, it is the personal responsibility of the consumer to have it
replaced with a properly grounded 3-prong wall receptacle installed
by a qualified electrician.
See the INSTALLATION INSTRUCTIONS packaged with this
cooktop for complete installation and grounding instructions.
!
WARNING
This appliance is equipped with a 3-prong grounding plug for your protection
against shock hazard and should be plugged directly into a properly grounded
receptacle. DO NOT cut or remove the grounding prong from this plug.
Grounding
type wall
receptacle
Do not, under any
circumstances, cut,
remove, or bypass the
grounding prong.
Power supply cord with
3-prong grounding plug
Avoid fire hazard or electrical shock. DO NOT use an adapter plug, an
extension cord, or remove grounding prong from electrical power cord. Failure
to follow this warning can cause serious injury, fire or death.
LIQUEFIED PETROLEUM (PROPANE) GAS CONVERSION
This appliance can be used with Natural Gas and Propane Gas. It is shipped from the
factory for use with natural gas.
A kit for converting to LP gas is supplied with your cooktop. The kit is marked “FOR LP/
PROPANE GAS CONVERSION”. Follow the installation instructions which are inside the
envelope.
The conversion must be performed by a qualified service technician in accordance with the
kit instructions and all local codes and requirements. Failure to follow instructions could
result in serious injury or property damage. The qualified agency performing this work
assumes responsibility for the conversion.
!
WARNING
Severe shock, or damage to the cooktop may occur if the cooktop is not installed by a qualified installer or electrician.
!
CAUTION
Any additions, changes or conversions required in order for this appliance to satisfactorily meet the application
needs must be made by a qualified service technician in accordance with the manufacturer’s instructions and all
codes and requirements of the authority having jurisdiction. Failure to follow the instructions could result in
serious injury or property damage. The qualified agency performing this work assumes responsibility for the
conversion.
8 Surface Cooking
FLAME SIZE
For most cooking, start on the highest control setting and then turn to a lower one to
complete the process. Use the chart below as a guide for determining proper flame size for
various types of cooking. The size and type of utensil used and the amount of food being
cooked will influence the setting needed for cooking.
For deep fat frying, use a thermometer and adjust the surface control knob accordingly. If
the fat is too cool, the food will absorb the fat and be greasy. If the fat is too hot, the food
will brown so quickly that the center will be undercooked. Do not attempt to deep fat fry too
much food at once as the food will neither brown nor cook properly.
RIGHT
WRONG
*Flame Size
High Flame
Medium Flame
Low Flame
Type of Cooking
Start most foods; bring water to a boil; pan broiling
Maintain a slow boil; thicken sauces, gravies; steam
Keep foods cooking; poach; stew
*These settings are based on using medium-weight aluminum pans with
lids. Settings may vary when using other types of pans.
Never extend the flame beyond the outer edge of the utensil. A higher flame
simply wastes heat and energy, and increases your risk of being burned by the
flame.
PROPER BURNER ADJUSTMENTS
The color of the flame is the key to proper burner adjustment. A good flame is clear, blue
and hardly visible in a well-lighted room. Each cone of flame should be steady and sharply
defined. Adjust or clean burner if flame is yellow-orange. To clean burner, see instructions
under General Care & Cleaning.
LOCATIONS OF THE BURNERS
Your cooktop is equipped with 5 different sized burners.
The surface burners are located on the cooktop as follows (See Figure):
- a 5 000 BTU (natural gas) burner located at the right rear position;
- two 9 500 BTU (natural gas) burners located at the left and center rear
positions;
- a 12 000 BTU (natural gas) burner located at the left front position;
- a 14 000 BTU (natural gas) burner located at the center front position;
- and a 17 000 BTU (natural gas) burner located at the right front position.
Surface Cooking
9
PLACEMENT OF BURNER HEADS AND CAPS
Place burner head over each gas orifice, matching the head with the
orifice size. Be careful not to damage the electrode while placing
the head over the orifice. Make sure electrode fits correctly into slot in
burner head. Place a burner cap on each burner head, matching the cap
size to the head size. The cap for each burner has an inner locating ring
which centers the cap correctly on the burner head. Be sure that all the
burner caps and burner heads are correctly placed BEFORE using your
appliance.
Burner Cap
Make sure each burner cap is properly aligned and level.
Turn the burner on to determine if it will light. If the burner does not light,
contact a Service Center. Do not service the sealed burner yourself.
Burner
Head
Electrode
PLACEMENT OF BURNER GRATES
Place grates on the Ceramic Glass Cooktop. Be sure they
are right located inside the stainless steel frame.
ATTENTION: Do not slide the grates on the stainless steel
frame, doing so can damage the surface.
Gas
Opening
10 Surface Cooking
SURFACE COOKING UTENSILS
*GOOD
POOR
• Flat bottom and straight sides.
• Pan overhangs unit by more than
2.5 cm (1”).
• Tight fitting lids.
Pans should have flat bottoms.
Check for flatness by rotating a
ruler across the bottom. There
should be no gaps between the
pan and ruler.
* Specialty pans such as lobster pots, griddles and pressure
cookers may be used but must
conform to the above recommended cookware requirements.
• Weight of handle does not tilt pan.
Pan is well balanced.
• Pan sizes match the amount of
food to be prepared and the size of
burner.
• Made of material that conducts
heat well.
• Curved and warped pan bottoms.
• Heavy handle tilts pan.
• Flame extends beyond unit.
• Easy to clean.
Note: Always use a utensil for its intended purpose. Follow manufacturer's instructions.
Some utensils were not made to be used in the oven or on the cooktop.
USING THE GRIDDLE
Figure 2
Side with grooves
Figure 3
Flat Side
The griddle is intended for direct food cooking and can be used on both
sides (Figures 2 and 3). Do not use pans or other cookware on the griddle.
Doing so could damage the finish. With the grate in position over the
burner, set the griddle on top of the grate positioning the notches in the
griddle over the grate fingers(Figures 1 and 2).
Figure 1
!
CAUTION
Always place the griddle on the grate before to turn on the burner.
Always use potholders to remove the griddle from the grate. Allow the griddle to cool before removing. Do not
set hot griddle on surfaces that cannot withstand high heat; such as countertops.
Be sure the griddle is positioned correctly and stable before use to prevent hot spills and possible burns.
Surface Cooking
11
USING THE WOK STAND
The Wok Stand provided with your cooktop is designed to allow round-bottomed woks to be
used. It is recommended that you use a 14 inch diameter (35.5 cm) or less Wok. It is
recommended that you use the right front POWER burner with the wok stand for best
performance. If properly positioned, the Wok Stand will not slide off the grate.
!
CAUTION
Always use potholders to remove the wok stand from the grate. Allow the wok stand to cool before
removing. Do not set hot wok stand on surfaces that cannot withstand high heat; such as countertops.
Be sure the Wok Stand is positioned correctly and stable before use to prevent hot spills and
possible burns.
To Properly Position the Wok Stand:
With the grate in position over the burner, set the Wok Stand on top of the
grate positioning the notches in the Wok Stand over the cooktop grate fingers
(See Figure 1).
NOTE
The Wok cooking performance is best on the right front POWER burner position.
!
CAUTION
Be sure to ALWAYS use the Wok Stand if the stability of the wok is uncertain.
If cooking large amounts of liquid food without the Wok Stand, the wok may
tip and spill over causing burns.
Figure 1
Flat-bottom woks with large flat
bottoms may also be used on your
cooktop Surface Burner Grates
without the Wok Stand (See Figure
2). Insure the stability of the flatbottom wok before cooking without
the Wok Stand. If unstable, DO
NOT use the flat-bottom wok
without the Wok Stand.
Round-bottom woks (with a
support ring) should NOT be used
(See Figure 3). The supporting ring
was not designed for proper or
stable use on the Surface Burner
Grates.
Proper use of flat-bottom wok
on Surface Burner Grate
Figure 2
Improper use of round-bottom wok
on Surface Burner Grate
Figure 3
12 Surface Cooking
USING THE SIMMER PLATE
The simmer plate (Figure 1) is intended to diffuse lower temperature of the burner to help
cooking delicate aliment such as chocolate, milk, bechamel, etc... It can also be use for
cooking sauce during long period. With the grate in position over the burner, set the simmer
plate on top of the grate positioning the notches in the simmer plate over the grate fingers (See
Figure 2) and then place the utensil on the simmer plate.
Figure 1
!
Figure 2
CAUTION
Always place the simmer plate on the grate before to turn on the burner.
Always use potholders to remove the simmer plate from the grate. Allow the simmer plate to cool before
removing. Do not set hot simmer plate on surfaces that cannot withstand high heat; such as
countertops.
Be sure the simmer plate is positioned correctly and stable before use to prevent hot spills and
possible burns.
Surface Cooking
SETTING SURFACE CONTROLS
Your cooktop may be equipped with any combination of the following burners:
Simmer Burner: best used for simmering delicate sauces, etc.
Standard Burner: used for most all surface cooking needs.
Large Burner: best used when bringing large quantities of liquid to temperature and when
preparing larger quantities of food.
Regardless of size, always select a utensil that is suitable for the amount and type of food
being prepared. Select a burner and flame size appropriate to the pan. Never allow flames to
extend beyond the outer edge of the pan.
Your cooktop is also equipped with 270° rotation flame control valves. These valves provide
enhanced control of the burner flame. Each burner lights automatically from an electric
ignitor when its control knob is turned to the LITE position.
!
CAUTION
Do not place plastic items such as salt and pepper shakers, spoon holders or plastic wrappings on
top of the cooktop when it is in use. These items could melt or ignite. Potholders, towels or wood spoons
could catch fire if placed too close to a flame.
To operate the surface burner:
1. Place cooking utensil on burner.
2. Push in and turn the Surface Control knob to LITE. Note: All electronic
ignitors will click at the same time. However, only the burner you are turning
on will ignite.
3. Visually check that the burner has lit.
4. Turn the control knob to the desired flame size. The control knobs do not
have to be set at a particular mark. Use the guides and adjust the flame as
needed. DO NOT cook with the Surface Control knob in the LITE position.
(The electronic ignitor will continue to click if left in the LITE position,
causing premature wear.)
In the event of an electrical power outage, the surface burners can be lit
manually. To light a surface burner, hold a lit match to the burner head, then
slowly turn the Surface Control knob to LITE. Use caution when lighting surface
burners manually.
13
14 General Care & Cleaning
CARE & CLEANING TABLE
Surfaces
How to Clean
Painted and Plastic
Control Knobs
For general cleaning, use hot, soapy water and a cloth. For more difficult soils and
built-up grease, apply a liquid detergent directly onto the soil. Leave on soil for 30
to 60 minutes. Rinse with a damp cloth and dry. DO NOT use abrasive cleaners on
any of these materials; they can scratch.
Glass Surface
Before cleaning, turn all controls to OFF. Clean the glass as instructed in General
Care & Cleaning section under Cooktop Cleaning and Maintenance.
Porcelain Enamel
Burner Grates, Burner Caps,
Griddle, Simmer Plate, Wok
Stand
Clean burner grates in the dishwasher and dry upon removal. If soils are not
removed, follow the cooktop cleaning instructions below.
Surface Burners
Burner Head
The holes in the burners of your cooktop must be kept clean at all times for proper
ignition and a complete, even flame. Clean the burner holes routinely with a small
gauge wire or needle and especially after bad spillovers which could clog these
holes.
Gentle scouring with a soapy scouring pad will remove most spots. Rinse with a
1:1 solution of clean water and ammonia. If necessary, cover difficult spots with an
ammonia-soaked paper towel for 30 to 40 minutes. Rinse with clean water and a
damp cloth, then scrub with a soap-filled scouring pad. Rinse and wipe dry with a
clean cloth. Remove all cleaners or the porcelain may become damaged during
future heating. DO NOT use spray oven cleaners on the cooktop.
To remove, clean and replace sealed burner units; follow the instructions in General
Care & Cleaning section under Cleaning the Burner Grates, Burner Caps,
Burner Heads. For stubborn stains, scrub with soap and water or a mild abrasive
cleanser and damp cloth. Dry the burners thoroughly in a warm oven for 30 minutes.
Then replace them, making sure they are seated and level. DO NOT put burner units
in the dishwasher.
Stainless Steel,
Control Panel, Decorative
Trim,
Clean stainless steel with hot, soapy water and a dishcloth. Rinse with clean
water and a cloth. Do not use cleaners with high concentrations of
chlorides or chlorines. Do not use harsh scrubbing cleaners. Only use
kitchen cleaners that are especially made for cleaning stainless steel. Always
be sure to rinse the cleaners from the surface as bluish stains may occur
during heating that cannot be removed.
General Care & Cleaning
15
CLEANING THE BURNER GRATES, BURNER CAPS,
BURNER HEADS, SIMMER PLATE AND GRIDDLE
The Burner Grates, Burner Caps, Burner Heads, simmer plate
and griddle should be routinely cleaned. Keeping the burner
ports clean will prevent improper ignition and an uneven flame.
Refer to the following instructions:
Surface Burner Grate
To Remove and Replace the Surface Burner Grate,
Surface Burner Cap and Surface Burner Head - Remove
in the following order; (1st) Surface Burner Grate, (2nd) Surface
Burner Cap, (3rd) Surface Burner Head (See Figure 1).
Reverse the procedure above to replace the Surface Burner
Cap, Surface Burner Head and Surface Burner Grate. Do not
remove any burner parts from the cooktop until the
burner parts have completely cooled and are safe to
handle. Do not operate the surface burners without the
Surface Burner Caps, Surface Burner Heads and Surface
Burner Grates properly in place.
1st
Surface
Burner
2nd
Cap
Surface
Burner
3rd
Head
Electrode
To Clean the Burner Caps, Burner Heads, Burner Grates,
Orifice
Simmer Plate and Gridlle - Use a soap-filled scouring pad or
a mild abrasive cleaner to clean the surface burner caps and
Figure 1
surface burner heads. The Grates, Simmer Plates and Griddle
are designed to be Dishwasher safe for cleaning. The ports (or
slots) around the burner heads must be routinely cleaned. If residue still remains in these
ports, use a small-gauge wire or needle to clean the slots or holes being careful not to
damage the electrode. For proper flow of gas and ignition of the burner—DO NOT ALLOW
SPILLS, FOOD, CLEANING AGENTS OR ANY OTHER MATERIAL TO ENTER THE GAS
ORIFICE HOLDER OPENING. ALWAYS make sure that the surface burner cap, the surface
burner head and the surface burner grate are properly in place whenever a surface burner is
in use.
Surface Burner
Surface Burner
Surface Burner
Grate
Caps
Heads
THE COOKTOP IS NOT REMOVABLE. Do not attempt to remove or lift the cooktop.
!
CAUTION
- Use caution when replacing the burner head so the electrode is not damaged. A damaged
electrode may cause a delayed ignition or prevent the burner from igniting
- Any additions, changes or conversions required in order for this appliance to perform
satisfactorily must be made by a qualified service technician.
16 General Care & Cleaning
COOKTOP CLEANING AND MAINTENANCE
Consistent and proper cleaning is essential to maintaining your ceramic glass cooktop
Prior to using your cooktop for the first time, apply the recommended Cleaning Creme to the
ceramic surface. A sample of that cleaning creme is supplied with your appliance and you will
find it in store. Clean and buff with a paper towel. This will make cleaning easier when soiled
from cooking. The special cooktop cleaning cream leaves a protective finish on the glass to help
prevent scratches and abrasions.
Sliding aluminum or copper clad bottom pans on the cooktop glass can cause metal markings
on the cooktop surface. These marks should be removed immediately after the cooktop has
cooled using the cooktop cleaning cream. Metal marks can become permanent if not removed
prior to future use.
Cookware (cast iron, metal, ceramic or glass) with rough bottoms can mark or scratch the
cooktop surface. Do not slide anything metal or glass across the cooktop. Do not use your
cooktop as a cutting board or work surface in the kitchen. Do not cook foods directly on the
cooktop surface without a pan. Do not drop heavy or hard objects on the glass cooktop, they
may cause it to crack.
CLEANING RECOMMENDATIONS FOR THE CERAMIC GLASS
COOKTOP
!
CAUTION
Before cleaning the cooktop, be sure the controls are turned to OFF and the cooktop is COOL.
!
WARNING
DO NOT use a cooktop cleaner on a hot cooktop. The fumes can be hazardous to your health, and
can chemically damage the ceramic-glass surface.
For light to moderate soil:
Apply a few drops of Cleaning Creme directly to the cooktop. Use a
paper towel to clean the entire cooktop surface. Make sure the
cooktop is cleaned thoroughly, leaving no residue. Do not use the
towel you use to clean the cooktop for any other purpose.
For heavy, burned on soil:
First, clean the surface as described above. Then, if soils remain,
protec your hand with a potholder and carefully scrape soils with a
metal razor blade scraper, holding scraper at a 30 degree angle to the
surface. Remove loosened soils with cooktop cleaning cream and buff
surface clean.
General Care & Cleaning
CLEANING RECOMMENDATIONS FOR THE CERAMIC GLASS
COOKTOP (CONTINUED)
!
CAUTION
Damage to the ceramic glass cooktop may occur if you use scrub pad.
Plastic or foods with a high sugar content:
These types of soils need be removed immediately if spilled or melted onto the ceramic cooktop
surface. Permanent damage (such as pitting of the cooktop surface) may occur if not removed
immediately. After turning the surface elements OFF, use a razor blade scraper or a metal
spatula with a mitt and scrape the soil from the hot surface (as illustrated on previous page).
Allow the cooktop to cool, and use the same method for heavy or burned on soils.
Do not use the following on the ceramic glass cooktop:
• Do not use abrasive cleaners and scouring pads, such as metal
and some nylon pads. They may scratch the cooktop, making it
more difficult to clean.
• Do not use harsh cleaners, such as chlorine bleach, ammonia
or oven cleaners, as they may etch or discolor the cooktop.
• Do not use dirty sponges, cloths or paper towels, as they can
leave soil or lint on the cooktop which can burn and cause
discoloration.
Special Caution for Aluminum Foil and Aluminum Cooking Utensils
• Aluminum foil - Use of aluminum foil will damage the cooktop. Do not use thin aluminum
cooking utensils or allow foil to touch the ceramic cooktop under ANY circumstances.
• Aluminum utensils - The melting point of aluminum is much lower than that of other metals.
Care must be taken when aluminum pots or pans are used on the cooktop. If allowed to boil
dry, not only will the utensil be destroyed, but it may fuse to, break or mark the ceramic
glass surface,permanently damaging the cooktop surface.
CARE AND CLEANING OF STAINLESS STEEL
Special care and cleaning are required for maintaining the appearance of stainless parts.
Please refer to the table provided at the beginning of the General Care & Cleaning section
in this Use & Care Manual.
17
18 Solutions to Common Problems
IMPORTANT
Before calling for service, review this list. It may save you both time and expense. This
list includes common experiences that are not the result of defective workmanship or
material in your cooktop.
SURFACE BURNERS DO NOT LIGHT
• Surface Control knob has not been completely turned to LITE. Push in and turn the
Surface Control knob to LITE until burner ignites and then turn control knob to desired
flame size.
• Be sure gas supply valve is open.
• Burner ports are clogged. Clean burners. See Cleaning the Burner Grates, Burner
Caps,Burner Heads in General Care & Cleaning section. With the burner off, clean
ports with a small-gauge wire or needle.
• Power cord is disconnected from outlet (Electric Ignition Models only). Be sure cord is
securely plugged into the outlet.
• Electrical power outage (electric ignition models only). Burners can be lit manually.
See Setting Surface Controls in this Use and Care Guide.
BURNER FLAME ONLY LIGHTS HALF WAY AROUND BURNER
• Burner ports are clogged. With the burner off, clean ports by using a small-gauge wire
or needle.
• Moisture is present after cleaning. Lightly fan the flame and allow burner to operate
until flame is full. Dry the burners thoroughly following instructions in the General
Cleaning section.
BURNER FLAME IS ORANGE
• Dust particles in main line. Allow the burner to operate a few minutes until flame turns
blue.
• In coastal areas, a slightly orange flame is unavoidable due to salt air.
Solutions to Common Problems
SCRATCHES OR ABRASIONS ON CERAMIC GLASS
COOKTOP SURFACE
• Coarse particles (such as salt or sand) are between cooktop and utensil. Be sure
cooktop surface and bottom of utensils are clean before use. Small scratches do not
affect cooking and will become less visible with use.
• Cleaning materials not recommended for glass ceramic cooktop have been used. See
Ceramic-Glass Cooktop section in this Owner's Guide.
METAL MARKS ON CERAMIC GLASS COOKTOP SURFACE
• Sliding or scraping of metal utensils on cooktop surface. Do not slide metal utensils on
cooktop surface. Use a mildly abrasive cleanser to remove marks.
BROWN STREAKS AND SPECKS ON CERAMIC GLASS
COOKTOP SURFACE
• Boilovers have cooked onto surface. Use razor blade scraper to remove soil. See
instructions under General Care & Cleaning.
• Cleaning materials not recommended for ceramic-glass cooktop have been used. Use
recommended cleaners and cleaning method. See Ceramic-Glass Cooktop section in
this Owner's Guide.
AREAS OF DISCOLORATION ON CERAMIC GLASS
COOKTOP SURFACE
• Mineral deposits from water and food. Wet surface with water and sprinkle on a
cooktop cleaning creme. Scrub with a clean damp paper towel until the stain
disappears. Wipe remaining paste away, then apply a small amount of cooktop
cleaning creme and polish with a clean paper towel. Use cookware with clean, dry
bottoms. See Ceramic-Glass Cooktop section in this Owner's Guide.
19
20 Warranty Information
COOKTOP WARRANTY Your cooktop is protected by this warranty
In the U.S.A., your appliance is warranted by Electrolux Home Products North America, a division of White Consolidated Industries, Inc. We
authorize no person to change or add to any of our obligations under this warranty. Our obligations for service and parts under this warranty
must be performed by us or an authorized Electrolux Home Products North America servicer. In Canada, your appliance is warranted by
Electrolux Canada Corp.
WARRANTY PERIOD
FULL ONE-YEAR
WARRANTY
THROUGH OUR AUTHORIZED SERVICERS,
WE WILL:
One year from original Pay all costs for repairing or replacing any
purchase date
parts of this appliance which prove to be
defective in materials or workmanship.
THE CONSUMER WILL BE RESPONSIBLE FOR:
Costs of service calls that are listed under NORMAL
RESPONSIBILITIES OF THE CONSUMER. *
LIMITED 2 ND -5 TH Second through fifth
YEAR
years from original
WARRANTY
purchase date
(Glass Smoothtop,
Seal & Elements)
Provide a replacement for any defective
surface heating element, deteriorated
rubberized-silicone seal (upswept models
only), or glass smoothtop that craks due to
thermal breakage (not customer abuse).
Diagnostic and any transportation and labor costs which
are required because of service.
LIMITED
Time periods listed
WARRANTY
above.
(Applicable to the
State of Alaska)
All of the provisions of the full and limited
warranties above and the exclusions listed
below apply.
Costs of the technician’s travel to the home and any
costs for pick up and delivery of the appliance required
because of service.
*NORMAL
RESPONSIBILITIES
OF THE CONSUMER
EXCLUSIONS
IF YOU NEED
SERVICE
USA
1•800•944•9044
Electrolux Home Products
North America
P.O. Box 212378
Augusta, GA 30917
This warranty applies only to products in ordinary household use, and the consumer is responsible
for the items listed below:
1. Proper use of the appliance in accordance with instructions provided with the product.
2. Proper installation by an authorized servicer in accordance with instructions provided with the appliance and
in accordance with all local plumbing, electrical and/or gas codes.
3. Proper connection to a grounded power supply of sufficient voltage, replacement of blown fuses, repair of
loose connections or defects in house wiring.
4. Expenses for making the appliance accessible for servicing, such as removal of trim, cupboards, shelves,etc.,
which are not a part of the appliance when it was shipped from the factory.
5. Damages to finish after installation.
6. Replacement of light bulbs and/or fluorescent tubes (on models with these features).
This warranty does not cover the following:
1. CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND INCIDENTAL
EXPENSES RESULTING FROM ANY BREACH OF THIS WRITTEN OR ANY IMPLIED WARRANTY.
NOTE: Some states do not allow the exclusion or limitation of incidental or consequential damages, so this
limitation or exclusion may not apply to you.
2. Service calls which do not involve malfunction or defects in workmanship or material, or for appliances not
in ordinary household use. The consumer shall pay for such service calls.
3. Damages caused by services performed by servicers other than Electrolux Home Products North America
or its authorized servicers; use of parts other than genuine Electrolux Home Products parts; obtained from
persons other than such servicers; or external causes such as abuse, misuse, inadequate power supply or
acts of God.
4. Products with original serial numbers that have been removed or altered and cannot be readily determined.
Keep your bill of sale, delivery slip, or some other appropriate payment record. The date on the bill establishes
the warranty period should service be required. If service is performed, it is in your best interest to obtain and
keep all receipts. This written warranty gives you specific legal rights. You may also have other rights that vary
from state to state. Service under this warranty must be obtained by contacting Electrolux Home Products:
Canada
1•866•294•9911
Electrolux Home Products
North America
802, boul. L’Ange-Gardien
L’Assomption, Québec
J5W 1T6
This warranty only applies in the 50 states of the U.S.A., Puerto Rico, and Canada.
Product features or specifications as described or illustrated are subject to change
without notice. All warranties are made by Electrolux Home Products North
America, a division of White Consolidated Industries, Inc. In Canada, your appliance
is warranted by Electrolux Canada Corp.