Brocade Communications Systems NetIron CES Series Installation guide

53-1001834-01
May 28, 2010
Brocade NetIron CES 2000
and NetIron CER 2000
Hardware Installation Guide
Supported Release: Multi-Service IronWare R05.0.00
®
Copyright © 2006-2010 Brocade Communications Systems, Inc. All Rights Reserved.
Brocade, the B-wing symbol, BigIron, DCX, Fabric OS, FastIron, IronPoint, IronShield, IronView, IronWare, JetCore, NetIron,
SecureIron, ServerIron, StorageX, and TurboIron are registered trademarks, and DCFM, Extraordinary Networks, and SAN Health
are trademarks of Brocade Communications Systems, Inc., in the United States and/or in other countries. All other brands,
products, or service names are or may be trademarks or service marks of, and are used to identify, products or services of their
respective owners.
Notice: The information in this document is provided “AS IS,” without warranty of any kind, including, without limitation, any
implied warranty of merchantability, noninfringement or fitness for a particular purpose. Disclosure of information in this material
in no way grants a recipient any rights under Brocade's patents, copyrights, trade secrets or other intellectual property rights.
Brocade reserves the right to make changes to this document at any time, without notice, and assumes no responsibility for its
use.
The authors and Brocade Communications Systems, Inc. shall have no liability or responsibility to any person or entity with
respect to any loss, cost, liability, or damages arising from the information contained in this book or the computer programs that
accompany it.
Notice: The product described by this document may contain “open source” software covered by the GNU General Public License
or other open source license agreements. To find-out which open source software is included in Brocade products, view the
licensing terms applicable to the open source software, and obtain a copy of the programming source code, please visit http://
www.brocade.com/support/oscd.
Export of technical data contained in this document may require an export license from the United States Government.
Brocade Communications Systems, Incorporated
Corporate and Latin American Headquarters
Brocade Communications Systems, Inc.
1745 Technology Drive
San Jose, CA 95110
Tel: 1-408-333-8000
Fax: 1-408-333-8101
E-mail: info@brocade.com
Asia-Pacific Headquarters
Brocade Communications Systems China HK, Ltd.
No. 1 Guanghua Road
Chao Yang District
Units 2718 and 2818
Beijing 100020, China
Tel: +8610 6588 8888
Fax: +8610 6588 9999
E-mail: china-info@brocade.com
European Headquarters
Brocade Communications Switzerland Sàrl
Centre Swissair
Tour B - 4ème étage
29, Route de l'Aéroport
Case Postale 105
CH-1215 Genève 15
Switzerland
Tel: +41 22 799 5640
Fax: +41 22 799 5641
E-mail: emea-info@brocade.com
Asia-Pacific Headquarters
Brocade Communications Systems Co., Ltd. (Shenzhen WFOE)
Citic Plaza
No. 233 Tian He Road North
Unit 1308 – 13th Floor
Guangzhou, China
Tel: +8620 3891 2000
Fax: +8620 3891 2111
E-mail: china-info@brocade.com
Document History
Title
Publication number
Summary of changes
Date
Brocade NetIron CES 2000 and NetIron
CER 2000 Hardware Installation Guide
53-1001834-01
New release
May 28, 2010
Contents
About This Document
Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix
How this document is organized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix
Supported hardware and software . . . . . . . . . . . . . . . . . . . . . . . . . . . ix
What’s new in this document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x
Document conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x
Text formatting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x
Command syntax conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . x
Notes, cautions, and danger notices . . . . . . . . . . . . . . . . . . . . . . xi
Notice to the reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi
Related publications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi
Getting technical help or reporting errors . . . . . . . . . . . . . . . . . . . . .
Web access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
E-mail access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Telephone access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
xii
xii
xii
xii
Document feedback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii
Chapter 1
Product Overview
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Product overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Software features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Upgrade applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
iii
Hardware features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
NetIron CES 2024C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
NetIron CES 2024F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
NetIron CES 2048C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
NetIron CES 2048CX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
NetIron CES 2048F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
NetIron CES 2048FX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
NetIron CER 2024C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
NetIron CER 2024F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
NetIron CER 2048C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
NetIron CER 2048CX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
NetIron CER 2048F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
NetIron CER 2048FX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Control features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Network interfaces. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Power supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Cooling system and fans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Chapter 2
Installation
System unpacking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
General requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Summary of installation tasks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Installation precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Lifting precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Power precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Installation site preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Cabling infrastructure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Installation location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Redundant power supply installation . . . . . . . . . . . . . . . . . . . . . . . . 25
Installing an AC power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Installing a DC power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Device installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Installing the device on a desktop . . . . . . . . . . . . . . . . . . . . . . . 31
Installing the device in a rack . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
System power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Powering on the system. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Operation verification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Verifying proper operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Observing the power status LEDs. . . . . . . . . . . . . . . . . . . . . . . . 37
PC or terminal attachment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Attaching a PC or terminal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Chapter 3
Connecting a NetIron CES 2000 or NetIron CER 2000 Series Device
to a Network Device
Password assignment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
iv
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
IP address configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Support of sub-net masks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Assigning an IP address to a management interface . . . . . . . . 43
Assigning an IP address to an interface, virtual interface, or loopback
44
Enabling and disabling the interfaces . . . . . . . . . . . . . . . . . . . . 45
Management port function overview. . . . . . . . . . . . . . . . . . . . . . . . . 45
Device connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Chapter 4
Device Management Applications Familiarization
Management application overview . . . . . . . . . . . . . . . . . . . . . . . . . . 47
CLI Functionality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Online help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Command completion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Scroll control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Line editing commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Searching and filtering output from CLI commands . . . . . . . . . 49
Chapter 5
Hardware Maintenance
Hardware maintenance schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Power supply replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Installation precautions and warnings . . . . . . . . . . . . . . . . . . . . 56
Determining which power supply failed . . . . . . . . . . . . . . . . . . . 56
AC power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Power supplies for the NetIron CES and NetIron CER 2000 Series
devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Verifying proper operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
10-Gigabit Ethernet module installation or replacement. . . . . . . . . 68
Removing a 2 x10-Gigabit Ethernet module . . . . . . . . . . . . . . . 68
Installing a 2 x10-Gigabit Ethernet Module . . . . . . . . . . . . . . . . 69
Replacing the NetIron CES and the NetIron CER Series fan tray . . . 69
Fiber optic module replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Removing a fiber optic module . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Installing a new fiber optic module. . . . . . . . . . . . . . . . . . . . . . . 71
Cabling a fiber optic module . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Fiber optic connector cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
v
Chapter 6
Upgrading Software Images and Configuration Files
Software images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Images and procedures required . . . . . . . . . . . . . . . . . . . . . . . . 75
Description of the software images required. . . . . . . . . . . . . . . 76
Upgrade options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Displaying flash memory and version information . . . . . . . . . . 77
Backing up the current software images . . . . . . . . . . . . . . . . . . 79
Virtual interface module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Upgrading the device’s monitor and boot images . . . . . . . . . . . 80
Upgrading the device’s multi-service IronWare image . . . . . . . 81
Configuration files upload and download . . . . . . . . . . . . . . . . . . . . . 81
Replacing the startup configuration with the running configuration
82
Replacing the running configuration with the startup configuration
82
Copying a configuration file to or from a TFTP server . . . . . . . . 82
Making local copies of the startup configuration file . . . . . . . . 83
Dynamic configuration loading. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Usage considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Preparing the configuration file . . . . . . . . . . . . . . . . . . . . . . . . . 83
Loading the configuration information into the running-config 85
Save and load configuration information using SNMP. . . . . . . . . . . 85
Uploading and downloading configuration information using SNMP
85
Image and configuration files erasure. . . . . . . . . . . . . . . . . . . . . . . . 86
System reload sceduling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Reloading at a specific time . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Reloading after a specific amount of time. . . . . . . . . . . . . . . . . 87
Diagnostic error codes and remedies for TFTP transfers . . . . . . . . . 87
PREMIUM package upgrade. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Upgrade kit contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Hardware installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Appendix A
Regulatory Statements
U.S.A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Industry Canada statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Europe and Australia. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Germany. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Japan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Japan Denan power cord statement . . . . . . . . . . . . . . . . . . . . . . . . . 94
Power cords (Japan Denan) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Korea . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
China . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Russia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
vi
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
Appendix B
Caution and Danger Notices
Cautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Danger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101
Appendix C
Hardware Specifications
Hardware specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
Power supply frequency requirements . . . . . . . . . . . . . . . . . . .105
Power specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
Physical dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
Operating environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Storage environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
Cooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
Safety agency approvals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
Electromagnetic approvals . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
Port specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109
Console port pin assignments . . . . . . . . . . . . . . . . . . . . . . . . .109
Management port pin assignments . . . . . . . . . . . . . . . . . . . . .110
Power cords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
vii
viii
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
About This Document
Audience
This document is designed for system administrators with a working knowledge of Layer 2 and
Layer 3 switching and routing.
If you are using a Brocade Layer 3 Switch, you should be familiar with the following protocols if
applicable to your network – IP, RIP, OSPF, BGP, ISIS, IGMP, PIM, and VRRP.
How this document is organized
This document is organized to help you find the information that you want as quickly and easily as
possible.
The document contains the following components:
• Chapter 1, “Product Overview,” provides some basic information about the NetIron CES and
CER devices.
• Chapter 2, “Installation,” provides information about the physical setup of the NetIron devices.
• Chapter 3, “Connecting a NetIron CES 2000 or NetIron CER 2000 Series Device to a Network
Device,” provides information about setup and configuration of the devices.
• Chapter 4, “Device Management Applications Familiarization,” provides information about
using the command line interface (CLI) for device management.
• Chapter 5, “Hardware Maintenance,” provides information about replacing the
field-replaceable units of the devices.
• Chapter 6, “Upgrading Software Images and Configuration Files,” provides information about
software upgrades.
• Appendix A, “Regulatory Statements,” provides a listing of regulatory compliance statements
from several countries.
• Appendix B, “Caution and Danger Notices,” provides a listing of cautions and warnings in
several languages.
• Appendix C, “Hardware Specifications,” provides several tables of hardware specifications for
quick lookup.
Supported hardware and software
Although many different software and hardware configurations are tested and supported by
Brocade Communications Systems, Inc., documenting all possible configurations and scenarios is
beyond the scope of this document.
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
ix
The following hardware platforms are supported by this release of this guide:
• NetIron CES 2000 series
• NetIron CER 2000 Series
What’s new in this document
The following changes have been made since this document was last released:
• Information that was added:
• All information regarding the NetIron CER 2000 Series of routers
Document conventions
This section describes text formatting conventions and important notice formats used in this
document.
Text formatting
The narrative-text formatting conventions that are used are as follows:
bold text
Identifies command names
Identifies the names of user-manipulated GUI elements
Identifies keywords
Identifies text to enter at the GUI or CLI
italic text
Provides emphasis
Identifies variables
Identifies document titles
code text
Identifies CLI output
For readability, command names in the narrative portions of this guide are presented in bold: for
example, show version.
Command syntax conventions
Command syntax in this manual follows these conventions:
x
command and
parameters
Commands and parameters are printed in bold.
[]
Optional parameter.
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
variable
Variables are printed in italics enclosed in angled brackets < >.
...
Repeat the previous element, for example “member[;member...]”
|
Choose from one of the parameters.
Notes, cautions, and danger notices
The following notices and statements are used in this manual. They are listed below in order of
increasing severity of potential hazards.
NOTE
A note provides a tip, guidance, or advice, emphasizes important information, or provides a
reference to related information.
CAUTION
A Caution statement alerts you to situations that can be potentially hazardous to you or cause
damage to hardware, firmware, software, or data.
DANGER
A Danger statement indicates conditions or situations that can be potentially lethal or extremely
hazardous to you. Safety labels are also attached directly to products to warn of these conditions
or situations.
Notice to the reader
This document may contain references to the trademarks of the following corporations. These
trademarks are the properties of their respective companies and corporations.
These references are made for informational purposes only.
Corporation
Referenced Trademarks and Products
Phillips Screw Company, Inc.
Phillips
Related publications
The following Brocade documents supplement the information in this guide:
• Brocade MLXe and NetIron Family Configuration Guide.
• IronWare MIB Reference.
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
xi
NOTE
For the latest edition of these documents, which contain the most up-to-date information, see
Product Manuals at kp.foundrynet.com.
Getting technical help or reporting errors
Brocade is committed to ensuring that your investment in our products remains cost-effective. If
you need assistance, or find errors in the manuals, contact Brocade using one of the following
options:
Web access
Go to kp.foundrynet.com and log in to the Knowledge Portal (KP) to obtain more information about
a product, or to report documentation errors. To report errors, click on Cases > Create a New
Ticket. Make sure you specify the document title in the ticket description.
E-mail access
Send an e-mail to IPsupport@brocade.com
Telephone access
United States and Canada: 800-752-8061
International: +800-ATFIBREE (+800 28 34 27 33)
Refer to the Services & Support page on www.brocade.com for additional toll-free numbers that
may be available within your country.
Areas unable to access 800 numbers: +1-408-333-6061
Document feedback
Quality is our first concern at Brocade and we have made every effort to ensure the accuracy and
completeness of this document. However, if you find an error or an omission, or you think that a
topic needs further development, we want to hear from you. Forward your feedback to:
documentation@brocade.com
Provide the title and version number of the document and as much detail as possible about your
comment, including the topic heading and page number and your suggestions for improvement.
xii
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
Chapter
Product Overview
1
Introduction
Network planners today have to expand and extend the range of services offered further into the
edge of the network. This requires extending the intelligence and high-touch processing capabilities
to the network edge— whether in a metro network, a campus network or in a data center. The
challenge at the edge of the network is compounded by the need to flexibly define and easily
manage customer services in an intuitive manner. Whether deployed from a central office or from
remote hubs, space is an important constraint for such providers.
In order to meet these challenges, the NetIron Carrier Ethernet Switch (CES) 2000 Series and
NetIron Carrier Ethernet Router (CER) 2000 Series were purpose-built to offer flexible, secure and
advanced processing capabilities in a compact form factor. The NetIron CES 2000 and NetIron CER
2000 Series are compact 1 RU, multi-service edge or aggregation devices with a powerful set of
capabilities chosen to combine performance with rich functionality at the edge of the network. The
NetIron CES 2000 Series and NetIron CER 2000 Series devices offer network planners a rich set of
high-performance IPv4, Classic Layer 2, Provider Bridge (PB) and Provider Backbone Bridge (PBB)
functionalities in the same device. With these capabilities, a diverse set of applications ranging
from metro edge networks, ISPs, data centers, large enterprises, government networks, and
education or research can be addressed with the NetIron CES 2000 Series and NetIron CER 2000
Series.
This guide includes procedures for installing the hardware and configuring essential, basic
parameters such as permanent passwords and IP addresses. The basic software configuration
procedures show how to perform tasks using the CLI. This guide also includes instructions for
managing and maintaining the NetIron Carrier Ethernet Switch (CES) and NetIron Carrier Ethernet
Router (CER) hardware.
There are six flavors to the NetIron Carrier Ethernet Switch (CES) 2000 Series:
• NetIron CES 2024C — accommodates 24-port 10/100/1000 RJ45 model with 4 combination
100/1000 Hybrid Fiber (HF) ports and an optional field upgradeable 2x10G uplink slot
• NetIron CES 2024F — accommodates 24-port 100/1000 Hybrid Fiber (HF) model with 4
combination 10/100/1000 RJ45 ports and an optional field upgradeable 2x10G XFP uplink
slot
• NetIron CES 2048C — accommodates 48-port 10/100/1000 RJ45 model with 4 combination
100/1000 Hybrid Fiber (HF) ports
• NetIron CES 2048CX — accommodates 48-port 10/100/1000 RJ45 model with 2x10G XFP
uplink ports
• NetIron CES 2048F — accommodates 48-port 100/1000 Hybrid Fiber (HF) model
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
1
1
Product Overview
• NetIron CES 2048FX — accommodates 48-port 100/1000 Hybrid Fiber (HF) model with 2x10G
XFP uplink ports
FIGURE 1
NetIron CES 2024C
FIGURE 2
NetIron CES 2048CX
There are also six models in the NetIron Carrier Ethernet Router (CER) 2000 Series:
• NetIron CER 2024C — accommodates 24-port 10/100/1000 Copper RJ45 model with 4
combination 100/1000 Hybrid Fiber (HF) ports and an optional field upgradeable 2x10G
uplink slot
• NetIron CER 2024F — accommodates 24-port 100/1000 Hybrid Fiber (HF) model with 4
combination 10/100/1000 RJ45 ports and an optional field upgradeable 2x10G XFP uplink
slot
• NetIron CER 2048C — accommodates 48-port 10/100/1000 Copper RJ45 model with 4
combination 100/1000 Hybrid Fiber (HF) ports
• NetIron CER 2048F — accommodates 48-port 100/1000 Hybrid Fiber (HF) model
• NetIron CER 2048CX — accommodates 48-port 10/100/1000 RJ45 model with 2x10G XFP
uplink ports
• NetIron CER 2048FX — accommodates 48-port 100/1000 Hybrid Fiber (HF) model with 2x10G
XFP uplink ports
FIGURE 3
2
NetIron CER 2024C
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
Product overview
FIGURE 4
1
NetIron CER 2048CX
Product overview
The NetIron CES 2000 Series is a compact 1 RU, multi-service edge or aggregation switch with a
powerful set of capabilities that combine performance with rich functionality at the network edge.
The NetIron CES 2000 Series switch offers network planners a broad set of high performance IPv4,
Classic Layer 2, Provider Bridge (PB) and Provider Backbone Bridge (PBB) functionalities in the
same device. With these capabilities, the NetIron CES 2000 Series addresses a diverse set of
applications in metro edge networks, ISP networks, mobile backhaul networks, data centers, large
enterprises, government networks and education or research.
FIGURE 5
NetIron CES 2000 Series switch
The NetIron CER 2000 Series is a compact 1 RU, IP, MPLS, and multi-VRF enabled metro router
offering a broad set of capabilities including high performance IPv4 and IPv6 routing, Advanced
Layer 2, Multiprotocol Label Switching (MPLS), Provider Bridge (PB) and Provider Backbone Bridge
(PBB) functionalities in the same device. With these capabilities, the NetIron CER 2000 Series
addresses a diverse set of needs in service provider networks and enterprise applications, as well
as metro edge networks and small data centers.
FIGURE 6
NetIron CER 2000 Series router
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
3
1
Software features
Software features
Software features differ depending on the software package that is purchased with the device. The
BASE package on the NetIron CES 2000 devices support full Layer 2 Switching and base Layer 3
(RIP and static routes). The Metro Edge Premium (ME_PREM) package support full Layer 2
Switching, base Layer 3 (RIP and static routes), Provider Bridges (IEEE 802.1ad), Provider
Backbone Bridges (IEEE 802.1ah), OSPF, ISIS, and Connectivity Fault Management (IEEE 802.1ag)
and Service OAM. The Layer 3 Premium (L3_PREM) packages support full Layer 2 Switching, base
Layer 3 (RIP and static routes), and full Layer 3 including BGP, ISIS and OSPF.
The BASE package on the NetIron CER 2000 devices support full Layer 2 Switching and full Layer 3
(RIP, OSPF, ISIS, and BGP). It also includes virtual routing in non-MPLS environments via Multi-VRF.
The Advanced Services Premium (ADV_SVCS_PREM) package includes MPLS, Layer 2 VPNs using
VPLS and VLLs, Provider Bridges (IEEE 802.1ad), Provider Backbone Bridges (IEEE 802.1ah),
Connectivity Fault Management (IEEE 802.1ag) and Service OAM, along with Ethernet Service
Instance (ESI).
All NetIron CES and CER 2000 devices can be upgraded to premium packages.
Upgrade applications
You can convert (upgrade) your NetIron CES 2000 Series device. Converting your NetIron CES
2000 Series device allows you to run a software image that contains additional capabilities
available in premium packages.
To convert your NetIron CES and CER 2000 Series devices, you need an upgrade kit. The kit
includes a Dual Inline Package (DIP) key, Multi-Service IronWare software, upgrade instructions,
and other items. Alternatively, you can order an NetIron CES or CER 2000 Series device with the
premium software already installed. For more information, see “PREMIUM package upgrade” on
page 88.
TABLE 1
Upgrade kits
Brocade part number
Description
NI-CES-2024-MEU
Metro Edge Premium upgrade for NetIron CES 2000 Series 24-port models.
NI-CES-2024-L3U
L3 Premium upgrade for NetIron CES 2000 Series 24-port models.
NI-CES-2048-MEU
Metro Edge Premium upgrade for NetIron CES 2000 Series 48-port models.
NI-CES-2048-L3U
L3 Premium upgrade for NetIron CES 2000 Series 48-port models.
NI-CER-2024-ADVU
Advanced Services Premium License for NetIron CER 24-port models.
NI-CER-2048-ADVU
Advanced Services Premium License for NetIron CER 48-port models.
Hardware features
This section describes the physical characteristics of the Brocade NetIron CES and NetIron CER
2000 Series devices. For details about physical dimensions, power supply specifications, and
pinouts, refer to the “Hardware specifications” on page 105.
The following figures show the front panels of the NetIron various 2024 and 2048 devices.
4
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
1
Hardware features
NetIron CES 2024C
The NetIron CES 2024C switch has twenty-four 10/100/1000 MbE RJ45 ports plus four
combination 100/ 1000 MbE SFP ports, one module slot for an optional field upgradable 2-port 10
GbE XFP module, one DB9 serial management interface port labeled Console, one 10/100/1000
MbE RJ45 out-of-band management port, one resilient six-unit fan tray, and two AC power supply
bays for 1+1 redundancy with one 500 W AC power supply included.
FIGURE 7
NetIron CES 2024C device with the optional 2 ports of 10-G XFP uplink
1
1
3
5
7
9
11
13
15
17
19
21
23
2
4
6
8
10
12
14
16
18
20
22
24
2
1
Optional 10 GbE XFP ports
2
Four combination 100/1000 MbE SFP ports
3
Twenty-four 10/100/1000 MbE RJ45 ports
4
DB9 serial port
5
Out-of-band management RJ45 port
3
5
4
NetIron CES 2024F
The NetIron CES 2024F has twenty-four 100/1000 MbE SFP ports plus four combination
10/100/1000 MbE RJ45 ports, one module slot for an optional field upgradable 2-port 10 GbE
XFP module, one DB9 serial management interface port labeled Console, one 10/100/1000 MbE
RJ45 out-of-band management port, one resilient six-unit fan tray, and two AC power supply bays
for 1+1 redundancy with one 500 W AC power supply included.
FIGURE 8
NetIron CES 2024F device
2
1
1
Four combination 10/100/1000 MbE RJ45 ports
2
Twenty-four 100/1000 MbE SFP ports
3
DB9 serial port
4
Out-of-band management RJ45 port
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
1
3
5
7
9
11
13 15 17 19 21 23
2
4
6
8
10 12
14 16 18 20 22 24
2
3
4
5
1
Hardware features
NetIron CES 2048C
NetIron CES 2048C (Copper) switch has forty-eight 10/100/1000 MbE RJ45 ports plus four
combination 100/ 1000 MbE SFP ports, one DB9 serial management interface port labeled
Console, one 10/100/1000 MbE RJ45 out-of-band management port, one resilient six-unit fan
tray, and two AC power supply bays for 1+1 redundancy with one 500 W AC power supply included.
FIGURE 9
NetIron CES 2048C device
1
2
1
2
3
4
5
6
7
8
9 11 13 15 17 19 21 23
10 12 14 16 18 20 22 24
3
25 27 29 31 33 35
26 28 30 32 34 36
37 39 41 43 45 47
38 40 42 44 46 48
4
1
DB9 serial port
2
Out-of-band management RJ45 port
3
Four combination 100/1000 MbE SFP ports
4
Forty-eight 10/100/1000 MbE RJ45 ports
NetIron CES 2048CX
NetIron CES 2048CX (Copper) has forty-eight 10/100/1000 MbE RJ45 ports plus two 10 GbE XFP
ports, one DB9 serial management interface port labeled Console, one 10/100/1000 MbE RJ45
out-of-band management port, one resilient six-unit fan tray, and two AC power supply bays for 1+1
redundancy with one 500 W AC power supply included.
FIGURE 10
NetIron CES 2048CX device
1 3
2 4
1
6
2
5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47
6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48
3
4
1
10 GbE XFP ports
2
DB9 serial port
3
Out-of-band management RJ45 port
4
Forty-eight 10/100/1000 MbE RJ45 ports
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
Hardware features
1
NetIron CES 2048F
NetIron CES 2048F (Fiber) has forty-eight 100/1000 MbE SFP ports, one DB9 serial management
interface port labeled Console, one 10/100/1000 MbE RJ45 out-of-band management port, one
resilient six-unit fan tray, and two AC power supply bays for 1+1 redundancy with one 500 W AC
power supply included.
FIGURE 11
NetIron CES 2048F device
1
1
3
5
7
9
11
2
4
6
8
10 12
13 15 17 19 21 23
25 27 29 31 33 35
37 39 41 43 45 47
14 16 18 20 22 24 26 28 30 32 34 36
38 40 42 44 46 48
2
3
1
DB9 serial port
2
Out-of-band management RJ45 port
3
Forty eight 100/1000 MbE SFP ports
NetIron CES 2048FX
NetIron CES 2048FX (Fiber) switch has forty-eight 100/1000 MbE SFP ports plus two 10 GbE XFP
ports, one DB9 serial management interface port labeled Console, one 10/100/1000 MbE RJ45
out-of-band management port, one resilient six-unit fan tray, and two AC power supply bays for 1+1
redundancy with one 500 W AC power supply included.
FIGURE 12
1
NetIron CES 2048FX device
2
11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47
1
3
5
7
9
2
4
6
8
10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48
3
1
10 GbE XFP ports
2
DB9 serial port
3
Out-of-band management RJ45 port
4
Forty eight 100/1000 MbE SFP ports
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
4
7
1
Hardware features
NetIron CER 2024C
The NetIron CER 2024C router has twenty-four 10/100/1000 MbE RJ45 ports plus four
combination 100/ 1000 MbE SFP ports, one module slot for an optional field upgradable 2-port 10
GbE XFP module, one DB9 serial management interface port labeled Console, one 10/100/1000
MbE RJ45 out-of-band management port, one resilient six-unit fan tray, and two AC power supply
bays for 1+1 redundancy with one 500 W AC power supply included.
FIGURE 13
NetIron CER 2024C device with the optional 2 ports of 10-G XFP uplink
1
1
3
5
7
9
11
13
15
17
19
21
23
2
4
6
8
10
12
14
16
18
20
22
24
2
1
Optional 10 GbE XFP ports
2
Four combination 100/1000 MbE SFP ports
3
Twenty-four 10/100/1000 MbE RJ45 ports
4
DB9 serial port
5
Out-of-band management RJ45 port
3
5
4
NetIron CER 2024F
The NetIron CER 2024F has twenty-four 100/1000 MbE SFP ports plus four combination
10/100/1000 MbE RJ45 ports, one module slot for an optional field upgradable 2-port 10 GbE
XFP module, one DB9 serial management interface port labeled Console, one 10/100/1000 MbE
RJ45 out-of-band management port, one resilient six-unit fan tray, and two AC power supply bays
for 1+1 redundancy with one 500 W AC power supply included.
FIGURE 14
NetIron CER 2024F device
2
1
8
1
Four combination 10/100/1000 MbE RJ45 ports
2
Twenty-four 100/1000 MbE SFP ports
3
DB9 serial port
4
Out-of-band management RJ45 port
1
3
5
7
9
11
13 15 17 19 21 23
2
4
6
8
10 12
14 16 18 20 22 24
2
3
4
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
Hardware features
1
NetIron CER 2048C
NetIron CER 2048C (Copper) router has forty-eight 10/100/1000 MbE RJ45 ports plus four
combination 100/ 1000 MbE SFP ports, one DB9 serial management interface port labeled
Console, one 10/100/1000 MbE RJ45 out-of-band management port, one resilient six-unit fan
tray, and two AC power supply bays for 1+1 redundancy with one 500 W AC power supply included.
FIGURE 15
NetIron CER 2048C device
1
2
1
2
3
4
5
6
7
8
9 11 13 15 17 19 21 23
10 12 14 16 18 20 22 24
3
25 27 29 31 33 35
26 28 30 32 34 36
37 39 41 43 45 47
38 40 42 44 46 48
4
1
DB9 serial port
2
Out-of-band management RJ45 port
3
Four combination 100/1000 MbE SFP ports
4
Forty-eight 10/100/1000 MbE RJ45 ports
NetIron CER 2048CX
NetIron CER 2048CX (Copper) has forty-eight 10/100/1000 MbE RJ45 ports plus two 10 GbE XFP
ports, one DB9 serial management interface port labeled Console, one 10/100/1000 MbE RJ45
out-of-band management port, one resilient six-unit fan tray, and two AC power supply bays for 1+1
redundancy with one 500 W AC power supply included.
FIGURE 16
NetIron CER 2048CX device
1 3
2 4
1
2
5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47
6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48
3
1
10 GbE XFP ports
2
DB9 serial port
3
Out-of-band management RJ45 port
4
Forty-eight 10/100/1000 MbE RJ45 ports
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
4
9
1
Hardware features
NetIron CER 2048F
NetIron CER 2048F (Fiber) has forty-eight 100/1000 MbE SFP ports, one DB9 serial management
interface port labeled Console, one 10/100/1000 MbE RJ45 out-of-band management port, one
resilient six-unit fan tray, and two AC power supply bays for 1+1 redundancy with one 500 W AC
power supply included.
FIGURE 17
NetIron CER 2048F device
1
1
3
5
7
9
2
4
6
8
10 12
11
13 15 17 19 21 23
25 27 29 31 33 35
37 39 41 43 45 47
14 16 18 20 22 24 26 28 30 32 34 36
38 40 42 44 46 48
2
3
1
DB9 serial port
2
Out-of-band management RJ45 port
3
Forty eight 100/1000 MbE SFP ports
NetIron CER 2048FX
NetIron CER 2048FX (Fiber) router has forty-eight 100/1000 MbE SFP ports plus two 10 GbE XFP
ports, one DB9 serial management interface port labeled Console, one 10/100/1000 MbE RJ45
out-of-band management port, one resilient six-unit fan tray, and two AC power supply bays for 1+1
redundancy with one 500 W AC power supply included.
FIGURE 18
1
NetIron CER 2048FX device
2
11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47
1
3
5
7
9
2
4
6
8
10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48
4
3
1
10 GbE XFP ports
2
DB9 serial port
3
Out-of-band management RJ45 port
4
Forty eight 100/1000 MbE SFP ports
Control features
Each NetIron CES 2000 Series and NetIron CER 2000 Series front panel has a combination of the
following control features:
• Serial Management Interface (the port labeled Console)
10
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
Hardware features
•
•
•
•
1
10/100/1000 ports with RJ-45 copper connectors
100/1000 Hybrid Fiber (HF) ports
100/1000 ports with mini-GBIC slots for SFP MSA-compliant fiber transceivers
NetIron CES 2000 and NetIron CES 2000 devices optionally support two 10-Gigabit Ethernet
uplink ports for 10-Gigabit Small Form Factor Pluggable (XFP) MSA-compliant optical
transceivers
Serial Management Interface (console port)
The Serial Management Interface enables you to configure and manage the device using a
third-party terminal emulation application on a directly connected PC. A straight-through EIA/TIA
DB-9 serial cable (F) ships with the device. The serial management interface (the port labeled
Console) is located in the front panel.
LEDs for NetIron CES and CER ports
The ports on NetIron CES 2000 and NetIron CER 2000 devices provide status information using
the LEDs listed in Table 2 and Table 3.
TABLE 2
LEDs for NetIron CES and NetIron CER 10/100/1000 Mbps ports
LED
Position
State
Meaning
Bottom Left
(Beneath the port indicates the
status of the
top(odd) port).
On
Link is up.
Off
Link is down.
Blinking
Port is transmitting or receiving traffic
Bottom Right
(beneath the port
indicates the
status of the lower
(even) ports).
On
Link is up.
Off
Link is down.
Blinking
Port is transmitting or receiving traffic
10/100/1000 Port LEDs
Lnk/Act
Lnk/Act
TABLE 3
LEDs for the NetIron CES 2000 and NetIron CER 2000 Series 10-Gbps Ethernet ports
LED
Port
State
Meaning
Left hand port
On
The port is connected.
Off
No fiber port connection exists.
Blinking
Traffic is being transmitted and received on the
fiber port
On
The port is connected.
Off
No fiber port connection exists.
Blinking
Traffic is being transmitted and received on the
fiber port
10-Gbps Port LEDs
Top
Bottom
Right hand port
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
11
1
Hardware features
NetIron CES 2000 Series and NetIron CER 2000 Series network interfaces
This section describes the port types in the NetIron CES 2000 Series and NetIron CER 2000 Series.
10/100/1000 Mbps ports
The 10/100/1000 ports on the NetIron CES 2000 Series and NetIron CER 2000 Series use
auto-sensing and auto-negotiating to determine the speed (10 Mbps, 100 Mbps, or 1000 Mbps)
and duplex mode (full-duplex or half-duplex) of the port at the other end of the link and adjust port
speed accordingly.
Combination ports
On devices with combination (combo) ports, one port out of each pair of copper and fiber ports can
be active at a time. Combo ports are numbered 1-4. For example, you can use either copper port 2
or fiber port 2, but not both at the same time. You can use a combination of fiber and copper ports
or all copper or all fiber ports, as needed.
If you attach both the copper and fiber connectors for a port to the network, the fiber connectors
take precedence over the copper connectors. These ports support true media automatic detection,
meaning the device selects the fiber or copper connector based on link availability. If a fiber link
cannot be established, the device selects the copper media.
10-Gbps ports
The NetIron CES 2048CX, NetIron CES 2048FX, NetIron CER 2048CX, and the NetIron CER 2048FX
come with two 10-Gigabit Ethernet ports installed. A 24-port NetIron CES or NetIron CER has a slot
to accommodate a 2-port 10-Gigabit Ethernet module. If your 24-port device does not include a
10-GbE module, you can optionally install one. Refer to “10-Gigabit Ethernet module installation or
replacement” on page 68.
The 10-Gigabit Ethernet ports use 10-Gigabit Small Form Factor Pluggable (XFP) MSA-compliant
transceivers.
Supported optics
100/1000 Ethernet Ports
This Ethernet Interface module contains 24 or 48 physical ports, through which you can connect
your NetIron CES 2000 Series or NetIron CER 2000 Series device to other network devices at a
speed of 100 Mbps or 1 Gbps.
Into a physical port, you must insert a fiber-optic transceiver provided by Brocade. The
SFP-compliant fiber-optic modules provide an optical transceiver or physical medium-dependent
(PMD) interface for fiber that can be used with the LAN physical layer (PHY)
The following 100 Mbps and 1 GbE optical transceivers are available from Brocade:
TABLE 4
12
SFP-compliant transceivers for the 100/1000 Ethernet interface module
Part number
Description
E1MG-TX
SFP Copper, RJ-45 connector
E1MG-SX
1000Base-SX SFP optic, multi-mode fiber, LC connector
E1MTG-SX
1000Base-SX SFP optic, multi-mode fiber, MTRJ connector
E1MG-SX2-1310
1310 1000Base-SX SFP optic multi-mode fiber, LC connector and support for distances
up to 2km
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
Hardware features
TABLE 4
1
SFP-compliant transceivers for the 100/1000 Ethernet interface module (Continued)
Part number
Description
E1MG-LX
1000Base-LX SFP optic, single-mode fiber, LC connector
E1MG-LHA
1000Base-LHA SFP optic, single-mode fiber, LC connector
E1MG-LHB
1000Base-LHB SFP optic, single-mode fiber, LC connector, 150km Maximum Reach
E1MG-BXD
1000Base-BXD SFP optic single-mode fiber, 1490nm, LC connector.
This optic can only be connected to an E1MG-BXU
E1MG-CWDM80-1470
CWDM SFP optic, 80km, 1470nm, LC connector
E1MG-CWDM80-1490
CWDM SFP optic, 80Km, 1490nm, LC connector
E1MG-CWDM80-1510
CWDM SFP optic, 80Km, 1510nm, LC connector
E1MG-CWDM80-1530
CWDM SFP optic, 80Km, 1530nm, LC connector
E1MG-CWDM80-1550
CWDM SFP optic, 80Km, 1550nm, LC connector
E1MG-CWDM80-1570
CWDM SFP optic, 80Km, 1570nm, LC connector
E1MG-CWDM80-1590
CWDM SFP optic, 80Km, 1590nm, LC connector
E1MG-CWDM80-1610
CWDM SFP optic, 80Km, 1610nm, LC connector
E1MG-100FX
100Base-FX SFP optic multi-mode fiber, LC connector
E1MG-100BXU
100Base-BXU SFP optic single-mode fiber, 1310nm, LC connector.
This optic can only be connected to an E1MG-100BXD.
E1MG-100BXD
100Base-BXD SFP optic single-mode fiber, 1490nm, LC connector.
This optic can only be connected to an E1MG-100BXU.
E1MG-100FX-IR
100BaseFX-IR optic for SMF with LC connector. For distances up to 15nm.
E1MG-100FX-LR
100BaseFX-LR SFP optic for SMF with LC connector. For distances up to 40km.
10 Gigabit Ethernet ports
A 10 Gigabit Ethernet module contains two physical ports, through which you can connect your
NetIron CES 2000 Series router to other network devices at a speed of 10 Gigabits.
Into a physical port, you must insert a fiber-optic transceiver provided by Brocade. The
XFP-compliant fiber-optic modules provide an optical transceiver or physical medium-dependent
(PMD) interface for single or multi-mode fiber that can be used with the LAN physical layer (PHY).
The following 10 Gigabit optics are available from Brocade.
TABLE 5
XFP-compliant optics for the 10 GbE Ethernet interface module
Part number
Description
10G-XFP-SR
850nm serial pluggable XFP optic, target range 300m over multi-mode fiber
10G-XFP-LR
1310nm serial pluggable XFP optic for up to 10km over single-mode fiber
10G-XFP-ER
1550nm serial pluggable XFP optic for up to 40km over single-mode fiber
10G-XFP-ZR
1550nm serial pluggable XFP optic for up to 80km over single-mode fiber
10G-XFP-ZRD
10GBase-ZR DWDM, XFP optic, 80km, 1530.33 to 1561.42
10G-XFP-CX4
10-Base-CX4, XFP transceiver, 15km, CX connector
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
13
1
Hardware features
Port regions
Ports on the NetIron CES 2000 and NetIron CER 2000 Series devices are grouped into regions. For
a few features, such as port monitoring and unknown unicast configurations, you will need to know
the region to which a port belongs. However, for most features, a port’s region does not affect
configuration or operation of the feature. If a port’s region does affect configuration or operation of
a feature, it is noted and described in the appropriate feature section of this guide.
NetIron CES 2024 and NetIron CER 2024 devices with 24 ports:
• Ports 1 – 24
• Port 2/1 (optional 10-GbE uplink port)
• Port 2/2 (optional 10-GbE uplink port)
NetIron CES 2048 and NetIron CER 2048 devices with 48 ports:
• Ports 1/1 –1/24
• Ports 1/25 – 1/48
• Port 2/1 (10-GbE uplink port on NetIron CES 2048CX, NetIron CES 2048FX, NetIron CER
2048CX, and NetIron CER 2048FX models only)
• Port 2/2 (10-GbE uplink port on NetIron CES 2048CX, NetIron CES 2048FX, NetIron CER
2048CX, and NetIron CER 2048FX models only)
Network interfaces
The output of the show media command displays the type of media installed in the ports.
NetIron#show media
Port 1/1:
Type : Copper
Vendor:
Part# :
Port 1/2:
Type : Copper
Vendor:
Part# :
Port 1/3:
Type : Copper
Vendor:
Part# :
Port 1/4:
Type : Copper
Vendor:
Part# :
Port 1/5:
Type : Copper
Vendor:
Part# :
Port 1/6:
Type : Copper
Vendor:
Part# :
Port 1/7:
Type : Copper
Vendor:
Part# :
14
Unknown, Version:
Unknown, Serial#:
Unknown
Unknown
Unknown, Version:
Unknown, Serial#:
Unknown
Unknown
Unknown, Version:
Unknown, Serial#:
Unknown
Unknown
Unknown, Version:
Unknown, Serial#:
Unknown
Unknown
, Version:
Unknown, Serial#:
Unknown
Unknown
, Version:
Unknown, Serial#:
Unknown
Unknown
, Version:
Unknown, Serial#:
Unknown
Unknown
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
Hardware features
Port 1/8:
Type :
Vendor:
Part# :
Port 1/9:
Type :
Vendor:
Part# :
Port 1/10:
Type :
Vendor:
Part# :
Port 1/11:
Type :
Vendor:
Part# :
Port 1/12:
Type :
Vendor:
Part# :
Port 1/13:
Type :
Vendor:
Part# :
Port 1/14:
Type :
Vendor:
Part# :
Port 1/15:
Type :
Vendor:
Part# :
Port 1/16:
Type :
Vendor:
Part# :
Port 1/17:
Type :
Vendor:
Part# :
Port 1/18:
Type :
Vendor:
Part# :
Port 1/19:
Type :
Vendor:
Part# :
Port 1/20:
Type :
Vendor:
Part# :
Port 1/21:
Type :
Vendor:
Part# :
Port 1/22:
Type :
Vendor:
Part# :
1
Copper
, Version:
Unknown, Serial#:
Unknown
Unknown
, Version:
Unknown, Serial#:
Unknown
Unknown
, Version:
Unknown, Serial#:
Unknown
Unknown
, Version:
Unknown, Serial#:
Unknown
Unknown
, Version:
Unknown, Serial#:
Unknown
Unknown
, Version:
Unknown, Serial#:
Unknown
Unknown
, Version:
Unknown, Serial#:
Unknown
Unknown
, Version:
Unknown, Serial#:
Unknown
Unknown
, Version:
Unknown, Serial#:
Unknown
Unknown
, Version:
Unknown, Serial#:
Unknown
Unknown
, Version:
Unknown, Serial#:
Unknown
Unknown
, Version:
Unknown, Serial#:
Unknown
Unknown
, Version:
Unknown, Serial#:
Unknown
Unknown
, Version:
Unknown, Serial#:
Unknown
Unknown
, Version:
Unknown, Serial#:
Unknown
Unknown
Copper
Copper
Copper
Copper
Copper
Copper
Copper
Copper
Copper
Copper
Copper
Copper
Copper
Copper
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
15
1
Hardware features
Port 1/23:
Type : Copper
Vendor:
, Version:
Unknown
Part# :
Unknown, Serial#:
Unknown
Port 1/24:
Type : Copper
Vendor:
, Version:
Unknown
Part# :
Unknown, Serial#:
Unknown
Port 2/1:
Type : 10GBASE-SR/SW (XFP)
Vendor:
Brocade Communications, Version:
Part# :
FTLX8511D3-F1
, Serial#:
KCP02X8
Port 2/2:
Type : 10GBASE-SR/SW (XFP)
Vendor:
Brocade Communications, Version:
Part# :
TRF2000EN-LF251 , Serial#:
T07J23170
All show media done
00
02
Syntax: show media
Power supplies
Each NetIron CES 2000 and NetIron CER 2000 Series device comes with one alternating-current
(AC) power supply. All models have two power supply slots, enabling you to install a second power
supply for redundancy.
NOTE
Changes or modifications made to this device that are not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
The power supplies can be swapped in or out of the device while the device is running. You can
remove and insert a power supply without opening the chassis. The remaining supply provides
enough power for the entire system.
The following sections provide further details about the power supplies for the NetIron CES 2000
and NetIron CER 2000 Series of devices:
• Power status LEDs are listed in “Observing the power status LEDs” on page 38.
• Hardware specifications for the power supplies are listed in “Hardware specifications” on
page 105.
• “About redundant power supplies and power supply failure” on page 17
16
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
Hardware features
1
AC power supplies
Figure 19 shows a rear view of a NetIron CES 2000 device containing one AC power supply.
FIGURE 19
AC Power Supply
1
1
Power supply
2
Six cooling fans
2
DC power supplies
Figure 20 shows the NetIron CES Series DC power supply.
FIGURE 20
DC Power Supply
About redundant power supplies and power supply failure
A NetIron CES 2000 or NetIron CER 2000 device with redundant power supplies can maintain full
operation when one power supply fails. Power supply failure can be a failure of the supply itself or
the office power grid connected to the power supply.
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
17
1
Hardware features
Cooling system and fans
This section describes the fans in the NetIron CES 2000 and NetIron CER 2000 Series devices with
6 fans. Figure 21 shows the NetIron CES Series cooling fans.
FIGURE 21
Cooling Fans
1
1
Six cooling fans
The NetIron CES 2000 and NetIron CER 2000 Series device cooling fans use pull configuration to
move the air from the front to the back of the device.
The fans in the NetIron CES and NetIron CER 2000 Series devices include six four-speed fans that
operate at low speed, medium speed, medium-high speed, and high speed based on the ambient
temperature and configured or default temperature thresholds. All fans operate simultaneously at
the same speed. If a single fan fails within the assembly, the fan tray should be replaced. The fan
tray is hot swappable and the mean time to recover (MTTR) is one minute.
The system uses a default or configured temperature threshold associated with it to determine at
which speed the fan should operate. If desired, you can change the settings of the temperature
thresholds associated with fan speed devices.
18
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
Chapter
2
Installation
System unpacking
DANGER
The procedures in this manual are for qualified service personnel.
The Brocade systems ship with all of the following items. Please review the list below and verify the
contents. If any items are missing, please contact the place of purchase.
Package contents
The package contains the following:
• Brocade NetIron CES 2000 or NetIron CER 2000 Series device
• 115V AC power cable (for AC sourced devices)
• Warranty card
General requirements
To manage the system, you need the following items for serial connection to the router:
• A management station, such as a PC running a terminal emulation application.
• A straight-through EIA/TIA DB-9 serial cable (F/F). The serial cable can be ordered separately
from Brocade. If you prefer to build your own cable, refer to the pinout information in “Port
specifications” on page 109.
You use the serial connection to perform basic configuration tasks including assigning an IP
address and network mask to the system. This information is required for managing the system
using IronView Network Manager or using the CLI through Telnet.
DANGER
Do not use the handles on the power supply units to lift or carry a Brocade device.
Summary of installation tasks
Follow the steps listed below to install your NetIron CES 2000 or NetIron CER 2000 Series device.
Details for each of the steps highlighted below are provided in this chapter and in the following
chapter.
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
19
2
Installation precautions
TABLE 6
Summary of installation tasks
Task
number
Task
Where to find more information
1
Ensure that the physical environment that will host the device
has the proper cabling and ventilation.
“Installation site preparation” on
page 24
2
Optionally insert a second or redundant power supply. If you
need to install a power supply, it may be easier to install it
before mounting the device, although the power supplies are
“hot swappable”, and can be installed or removed after the
device is mounted and powered-on.
“Redundant power supply
installation” on page 25
4
Install the Brocade device in an equipment rack.
“Device installation” on page 31
5
Once the device is physically installed, plug the device into a
nearby power source that adheres to the regulatory
requirements outlined in this manual.
“System power” on page 36
6
Verify that the system LEDs are registering the proper LED
state after power-on of the system.
“Operation verification” on page 37
7
Attach a terminal or PC to the Brocade device. This will enable
you to configure the device through the Command Line
Interface (CLI).
“PC or terminal attachment” on
page 39
8
No default password is assigned to the CLI. For additional
access security, assign a password.
“Password assignment” on page 41
9
Before connecting to the device, you need to configure an
interface IP address to the subnet on which it will be located.
Initial IP address configuration is performed using the CLI with
a direct serial connection. Subsequent IP address
configuration can be performed using the command line
interface.
“IP address configuration” on
page 42
10
Once you power on the device and assign IP addresses, the
system is ready to accept network connections.
“Device connection” on page 45
13
Secure access to the device.
NetIron Configuration Guide
Installation precautions
Follow these precautions when installing the unit.
DANGER
Risk of explosion if battery is replaced by an incorrect type. Replace the battery only with the
same or equivalent type recommended by the manufacturer. Lithium battery is a long life battery
and it is very possible that you will never need to replace it. However, should you need to replace
it, do not dispose of the battery along with household waste. Contact your local waste disposal
agency for the address of the nearest battery deposit site.
20
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
Installation precautions
2
CAUTION
All fiber-optic interfaces use Class 1 lasers.
CAUTION
Do not install the device in an environment where the operating ambient temperature might
exceed 40 C (104 F).
CAUTION
Make sure the air flow around the front, sides, and back of the device is not restricted.
CAUTION
Never leave tools inside the chassis.
Lifting precautions
DANGER
Make sure the rack or cabinet housing the device is adequately secured to prevent it from
becoming unstable or falling over.
DANGER
Mount the devices you install in a rack or cabinet as low as possible. Place the heaviest device at
the bottom and progressively place lighter devices above.
Power precautions
CAUTION
Use a separate branch circuit for each AC power cord, which provides redundancy in case one of
the circuits fails.
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
21
2
Installation precautions
CAUTION
Ensure that the device does not overload the power circuits, wiring, and over-current protection.
To determine the possibility of overloading the supply circuits, add the ampere (amp) ratings of
all devices installed on the same circuit as the device. Compare this total with the rating limit for
the circuit. The maximum ampere ratings are usually printed on the devices near the input power
connectors.
CAUTION
Make sure you insert the power supply right-side up. It is possible to insert the supply upside
down, although the supply will not engage with the power backplane when upside down. The
power supply is right-side up when the manufacturer label is on the top.
CAUTION
Remove the power cord from a power supply before you install it in or remove it from the device.
Otherwise, the power supply or the device could be damaged as a result. (The device can be
running while a power supply is being installed or removed, but the power supply itself should not
be connected to a power source.)
22
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
Installation precautions
2
CAUTION
The power supply is designed exclusively for use with the NetIron CES or NetIron CER. The power
supply produces extensive power. Installing the power supply in a device other than the NetIron
CES and CER 2000 Series devices will cause extensive damage to your equipment.
DANGER
Disconnect the power cord from all power sources to completely remove power from the device.
DANGER
Make sure to choose the appropriate circuit device depending on the number of AC power
supplies installed in the chassis. The minimum current draw for the system is one AC power
supply.
DANGER
Power supplies are hot swappable. However, Brocade recommends that you disconnect the
power supply from AC power before installing or removing the supply. The device can be running
while a power supply is being installed or removed, but the power supply itself should not be
connected to a power source. Otherwise, you could be injured or the power supply or other parts
of the device could be damaged.
DANGER
Make sure that the power source circuits are properly grounded, then use the power cord
supplied with the device to connect it to the power source.
DANGER
If the installation requires a different power cord than the one supplied with the device, make
sure you use a power cord displaying the mark of the safety agency that defines the regulations
for power cords in your country. The mark is your assurance that the power cord can be used
safely with the device.
CAUTION
All devices with DC power supplies are intended for installation in restricted access areas only. A
restricted access area is where access can be gained only by service personnel through the use
of a special tool, lock and key, or other means of security, and is controlled by the authority
responsible for the location.
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
23
2
Installation site preparation
CAUTION
For the DC input circuit (DC power supply part number RPS9-DC), make sure there is a Listed 20
amp circuit breaker, minimum 48Vdc, double pole, on the input to the power supply. The input
wiring for connection to the product should be Listed copper wire, 12 AWG, marked VW-1, and
rated minimum 90 C.
CAUTION
For a DC system (DC power supply part number RPS9-DC), use a grounding wire of at least 6
American Wire Gauge (AWG). The 6 AWG wire should be attached to an agency-approved crimp
connector, crimped with the proper tool.
Installation site preparation
Cabling infrastructure
Ensure that the proper cabling is installed in the site. Refer to “Hardware specifications” on
page 105 or www.brocade.com for a summary of supported cabling types and their specifications.
DANGER
The intra-building ports of the equipment or subassembly is suitable for connection to
intra-building or unexposed wiring or cabling only. The intra-building ports of the equipment or
subassembly MUST NOT be metallically connected to interfaces that connect to the OSP or its
wiring. These interfaces are designed for use as intra-building interfaces only (Type 2 or Type 4
ports as described in GR-1089-CORE, Issue 4) and require isolation from the exposed OSP
cabling. The addition of Primary Protectors is not sufficient protection in order to connect these
interfaces metallically to OSP wiring.
Installation location
Before installing the device, plan its location and orientation relative to other devices and
equipment. Allow at least 3 in. of space at the front of the device for the twisted-pair, fiber-optic,
and power cabling. Also, allow a minimum of 3 in. of space between the sides and the back of the
device and walls or other obstructions.
A NetIron CES 2000 or NetIron CER 2000 is suitable for installation in Network
Telecommunications facilities and locations where the NEC (National Electric Code) apply.
The device must be installed in a restricted access location, either a Central Office or
customer-premises equipment location.
24
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
Redundant power supply installation
2
Redundant power supply installation
The NetIron CES 2000 or NetIron CER 2000 device ships with one alternating-current (AC) power
supply or direct-current (DC) power supply. All models have two power supply slots, enabling you to
install a second power supply for redundancy. If desired, you can install a second supply for
redundancy.
CAUTION
Changes or modifications made to this device that are not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
If you need to install a redundant power supply, it may be easier to install it before mounting the
device, although the power supplies are “hot swappable” and can be installed or removed after the
device is mounted and powered on.
This section provides the following procedures:
• Installing a redundant AC power supply – “Installing an AC power supply” on page 25
• Installing a redundant DC power supply – “Installing a DC power supply” on page 27
Installing an AC power supply
DANGER
Before beginning the installation, refer to the precautions in “Power precautions” on page 21.
Use the following procedures for AC power supplies in NetIron CES and CER 2000 Series devices.
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
25
2
Redundant power supply installation
Follow the procedure given below to install an AC power supply.
1. If necessary, remove the power supply locking screws located in the upper left and the bottom
right of the device (illustrated below).
FIGURE 22
Power supply installation
2
1
1
Power supply
2
Grounding terminals
2. If the empty power supply bay has a cover plate, remove the two screws near the edges of the
cover plate to unlock the plate, then remove the plate.
3. Remove the power supply from its packaging.
4. With one hand, hold the bar on the front panel of the power supply. With the other hand,
support the underside of the power supply, and insert the power supply into the empty power
supply slot. Press until the supply is completely in the slot, so that the connectors on the back
of the supply are fully engaged with the pins on the power backplane.
CAUTION
Make sure you insert the power supply right-side up. It is possible to insert the supply upside
down, although the supply will not engage with the power backplane when upside down. The
power supply is right-side up when the manufacturer label is on the top.
5. Secure the two screws near the edges of the supply to lock the supply in place.
6. Connect the power cord to the power supply.
7.
26
Connect the plug end of the power cord into an outlet.
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
Redundant power supply installation
2
CAUTION
For the NEBS compliant installation of a NetIron CES 2000 or NetIron CER 2000 Series devices
with AC and DC system use a ground wire of at least #6 American Wire Gauge (AWG). The ground
wire should have an agency-approved crimped connector (provided with the chassis) attached to
one end, with the other end grounded to either a common bonding network or an isolated
bonding network. The connector must be crimped with the proper tool, allowing it to be
connected to both ground screws on the enclosure. Before crimping the ground wire into the
provided ground lug, insure the bare copper wire has been cleaned and antioxidant is applied to
the bare wire.
CAUTION
To insure adequate bonding when attaching the provided Panduit LCD6-10AF two-hole ground
lug, a minimum of 20 PSI of torque is required to be applied to the mounting hardware used to
attach the ground lug. Use a star washer to ensure an NEBS compliant connection.
Installing a DC power supply
DANGER
Before beginning the installation, refer to the precautions in “Power precautions” on page 21.
Use the following procedures for DC power supplies in NetIron CES and CER 2000 Series devices.
Follow the steps given below to install an DC power supply.
1. If necessary, remove the power supply locking screws located in the upper left and the bottom
right of the device.
2. If the empty power supply bay has a cover plate, remove the two screws near the edges of the
cover plate to unlock the plate, then remove the plate.
3. Remove the DC power supply from its packaging (Figure 23).
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
27
2
Redundant power supply installation
FIGURE 23
The DC power supply
4. Insert the wires into the DC wiring assembly (Figure 24).
5. Use the wire tightening screws to secure the wires.
28
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
Redundant power supply installation
FIGURE 24
2
The DC wiring assembly
1
2
1
Wire tightening screws
2
Assembly screws
6. With one hand, hold the bar on the front panel of the power supply. With the other hand,
support the underside of the power supply, and insert the power supply into the empty power
supply slot. Press until the supply is completely in the slot, so that the connectors on the back
of the supply are fully engaged with the pins on the power backplane (Figure 22).
CAUTION
Make sure you insert the power supply right-side up. It is possible to insert the supply upside
down, although the supply will not engage with the power backplane when upside down. The
power supply is right-side up when the manufacturer label is on the top.
7.
Secure the two screws near the edges of the supply to lock the supply in place (Figure 25).
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
29
2
Redundant power supply installation
FIGURE 25
DC power supply screws
1
2
1
Chassis attachment screws
2
Assembly screws
8. Connect the wire to your DC power source, making sure to connect the -48V cable to the
negative terminal on the power supply and the 0V cable to the positive terminal as marked on
the power supply.
The equipment installation must meet NEC/CEC code requirements. Consult local authorities for
regulations.
DANGER
DC return shall be isolated from the chassis ground (DC-I) when connections to the power supply
are made.
CAUTION
For the NEBS compliant installation of a NetIron CES or NetIron CER 2000 Series devices with AC
and DC system use a ground wire of at least 6 American Wire Gauge (AWG). The ground wire
should have an agency-approved crimped connector (provided with the chassis) attached to one
end, with the other end grounded to either a common bonding network or an isolated bonding
network. The connector must be crimped with the proper tool, allowing it to be connected to both
ground screws on the enclosure. Before crimping the ground wire into the provided ground lug,
insure the bare copper wire has been cleaned and antioxidant is applied to the bare wire.
30
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
Device installation
2
CAUTION
To insure adequate bonding when attaching the provided Panduit LCD6-10AF two-hole ground
lug, a minimum of 20 PSI of torque is required to be applied to the mounting hardware used to
attach the ground lug. Use a star washer to ensure an NEBS compliant connection.
Device installation
You can install Brocade systems on a desktop, or in an equipment rack.
Installing the device on a desktop
Follow the steps for desktop installation.
1. Set the device on a flat desktop, table, or shelf. Make sure that adequate ventilation is
provided for the system – a 3-inch clearance is recommended on each side.
2. Go to “System power” on page 36.
Installing the device in a rack
For rack mount installation, Brocade recommends that you use the rack mount ears attached to
the unit. Each unit ships with rack ears attached to the front of the unit. You can mount the rack
ears in 4 different locations on the device.
NOTE
While attaching the chassis to the rack, star washers shall be used to provide better grounding of
the chassis to the rack. Additionally if any single hole grounding lugs are used star washers shall be
used as a means to prevent rotation of the lug.
Forward rack mount position
The NetIron CES and NetIron CER 2000 devices ship with the rack ears attached to the front of the
device as shown below.
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
31
2
Device installation
FIGURE 26
Front rack mount position
5 Inch offset rack mount position
FIGURE 27
32
5 Inch offset rack mount position
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
Device installation
2
Mid rack mount position
FIGURE 28
Mid rack mount position
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
33
2
Device installation
Reverse rack mount position
FIGURE 29
Reverse rack mount position
You will need the following tools for installation:
• #2 Phillips-head screwdriver
• Four #12-24 screws (or as specified by rack type) to mount the Brocade device to the rack
34
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
Device installation
2
Installation steps
1. Mount the device in the rack as illustrated in Figure 30.
FIGURE 30
Installing the NetIron CES or NetIron CER 2000 Series device in a rack
I
2. Using a 2-hole grounding lug and a minimum #6 AWG grounding wire, ground the chassis to
either a common bonding network or an isolated bonding network.
3. Proceed to “System power” on page 36.
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
35
2
System power
System power
After you complete the physical installation of the system, you can power on the system.
Powering on the system
1. Ensure that all power supplies are fully and properly inserted and no power supply slots are
uncovered.
CAUTION
Never leave tools inside the device.
2. Remove the power cord from the shipping package.
3. Attach the AC power cable to the AC connector on the rear panel.
4. Insert the power cable plug into a 115V/120V outlet.
NOTE
To turn the system off, simply unplug the power cords.
NOTE
The socket should be installed near the equipment and should be easily accessible.
NOTE
If the outlet is not rated 115/120V, stop and get the appropriate cable for the outlet.
DANGER
The intra-building ports of the equipment or subassembly is suitable for connection to
intra-building or unexposed wiring or cabling only. The intra-building ports of the equipment or
subassembly MUST NOT be metallically connected to interfaces that connect to the OSP or its
wiring. These interfaces are designed for use as intra-building interfaces only (Type 2 or Type 4
ports as described in GR-1089-CORE, Issue 4) and require isolation from the exposed OSP
cabling. The addition of Primary Protectors is not sufficient protection in order to connect these
interfaces metallically to OSP wiring.
DANGER
Before crimping the ground wire into the provided ground lug insure the bare copper wire has
been cleaned and antioxidant is applied to the bare wire.
DANGER
To insure adequate bonding when attaching the ground lug, a minimum of 20 PSI of torque is
required to be applied to the mounting hardware used to attach the ground lug.
36
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
Operation verification
2
Operation verification
After you have installed any redundant power supplies, verify that the device is working properly by
plugging it into a power source and verifying that it passes its self test.
If your device has more than one power supply installed, repeat this procedure for each power
supply.
Verifying proper operation
1. Connect the power cord supplied with the device to the power connector on the power supply
on the rear of the device.
2. Insert the other end into a properly grounded electrical outlet.
3. Verify that the LED for each power supply is a solid green.
4. Verify proper operation by observing the LEDs.
All the port LEDs should flash momentarily, usually in sequence, while the device performs
diagnostics. After the diagnostics are complete, the LEDs will be dark except for the ones that
are attached by cables to other devices. If the links on these cables are good and the
connected device is powered on, the link LEDs will light.
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
37
2
Operation verification
Observing the power status LEDs
Table 7 lists the LEDs that show power status for the NetIron CES and CER 2024 models. The
power supplies themselves do not have LEDs. The LEDs for the 2024 models are stacked on the
right side of the front panel, just below the console port, labeled P1, P2 , and Fn, top to bottom to
right.
TABLE 7
LEDs for power and fan status for the 2024 models
LED
Position
State
Meaning
Fan (labeled Fn)
Right side of front
panel
Green
The fan tray is powered on and is operating
normal.
Amber/Green
Blinking
The fan tray is not plugged in.
Amber
The fan tray is plugged in but one or more fans
are faulty.
Off
Power supply 1 is not installed or is not
providing power.
Amber
Power supply 1 is installed, but not connected
or a fault is detected.
Green blinking
Supply has input power, but AC output is not
enabled.
Green
Power supply 1 is installed and is functioning
normally.
Off
Power supply 2 is not installed or is not
providing power.
Amber
Power supply 2 is installed, but not connected
or a fault is detected.
Green blinking
Supply has input power, but AC output is not
enabled.
Green
Power supply 2 is installed and is functioning
normally.
AC PS1 (labeled P1)
AC PS2 (labeled P2)
Right side of front
panel
Right side of front
panel
Power Supplies DC - same indications for both DC power supplies
DC
Right side of front
panel
Off
Power supply is not installed or is not providing
power
Amber
Power supply is installed, but not connected or
a fault is detected.
Green blinking
Supply has input power, but DC output is not
enabled.
Green
Supply has DC power, is enabled, and has good
output.
Table 8 lists the LEDs that show power status for the NetIron CES and CER 2048 models. The
power supplies themselves do not have LEDs. The LEDs for the 2048CX, 2048F, and 2048FX
models are just below the management Ethernet port on the left side of the front panel, labeled
P1, P2 , and Fn, left to right. The LEDs for the 2048C are just below the console connector on the
left side of the front panel, labeled P1, P2 , and Fn, left to right.
38
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
PC or terminal attachment
TABLE 8
2
LEDs for power for the 2048 models
LED
Position
State
Meaning
Fan (labeled Fn)
Left side of front
panel
Green
The fan tray is powered on and is operating
normal.
Amber/Green
Blinking
The fan tray is not plugged in.
Amber
The fan tray is plugged in but one or more fans
are faulty.
Off
Power supply 1 is not installed or is not
providing power.
Amber
Power supply 1 is installed, but not connected
or a fault is detected.
Green blinking
Supply has input power, but AC output is not
enabled.
Green
Power supply 1 is installed and is functioning
normally.
Off
Power supply 2 is not installed or is not
providing power.
Amber
Power supply 2 is installed, but not connected
or a fault is detected.
Green blinking
Supply has input power, but AC output is not
enabled.
Green
Power supply 2 is installed and is functioning
normally.
PS1 (labeled P1)
PS2 (labeled P2)
Left side of front
panel
Left side of front
panel
Power Supplies DC - same indications for both DC power supplies
DC
Right side of front
panel
Off
Power supply is not installed or is not providing
power
Amber
Power supply is installed, but not connected or
a fault is detected.
Green blinking
Supply has input power, but DC output is not
enabled.
Green
Supply has DC power, is enabled, and has good
output.
The software regularly polls the hardware for power status information. You can display the status
information from any management session. In addition, the software automatically generates a
Syslog message and SNMP trap if a status change occurs.
PC or terminal attachment
To assign an IP address, you must have access to the Command Line Interface (CLI). The CLI is a
text-based interface that can be accessed through a direct serial connection to the device and
through Telnet connections.
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
39
2
PC or terminal attachment
You need to assign an IP address using the CLI. You can access the CLI by attaching a serial cable
to the Console port. After you assign an IP address, you can access the system through Telnet or
IronView Network Manager.
Attaching a PC or terminal
Follow the steps given below to attach a management station using the serial port.
1. Connect a PC or terminal to the serial port of the system using a straight-through cable. The
serial port has a male DB-9 connector.
NOTE
You need to run a terminal emulation program on the PC.
2. Open the terminal emulation program and set the session parameters as follows:
•
•
•
•
•
Baud: 9600 bps
Data bits: 8
Parity: None
Stop bits: 1
Flow control: None
When you establish the serial connection to the system, press Enter to display the CLI prompt in the
terminal emulation window. For example:
NetIron>
If you see this of these prompt, you are now connected to the system and can proceed to
“Password assignment” on page 41.
You can customize the prompt by changing the system name. For more information, refer to the
NetIron Configuration Guide.
If you do not see one of these prompts, follow the instructions given below.
1. Make sure the cable is securely connected to your PC and to the Brocade system.
2. Check the settings in your terminal emulation program. In addition to the session settings
listed above, make sure the terminal emulation session is running on the same serial port you
attached to the Brocade system.
The EIA/TIA 232 serial communication port serves as a connection point for management by a PC
or SNMP workstation.
40
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
Chapter
Connecting a NetIron CES 2000 or NetIron CER 2000
Series Device to a Network Device
3
Password assignment
DANGER
The procedures in this manual are for qualified service personnel.
By default, the NetIron CES and NetIron CER 2000 Series device’s CLI is not protected by
passwords. To secure CLI access, Brocade strongly recommends assigning passwords. (For
additional information on security, refer to Security Guide.)
The CLI contains the following access levels:
• Privileged EXEC – This level is also called the Enable level and can be secured by a password.
You can perform tasks such as manage files on the management module’s flash memory or a
PCMCIA flash card in the management module’s slots 1 or 2, save the system configuration to
flash memory, and clear caches at this level.
• CONFIG – The configuration level. This level lets you configure the system’s IP address and
configure routing features. To access the CONFIG mode, you must already be logged into the
Privileged level of the EXEC mode.
NOTE
You can assign passwords using the IronView Network Manager if an Enable password for a Super
User is already configured on the device.
You can set the following levels of Enable passwords:
• Super User – Allows complete read-and-write access to the system. This is generally for system
administrators and is the only password level that allows you to configure passwords.
NOTE
You must set a super user password before you can set other types of passwords.
• Port Configuration – Allows read-and-write access for specific ports but not for global
(system-wide) parameters.
• Read Only – Allows access to the Privileged EXEC mode and CONFIG mode but only with read
access.
Follow the steps given below to set passwords.
1. At the opening CLI prompt, enter the following command to change to the Privileged level of the
EXEC mode.
NetIron> enable
NetIron#
2. Access the CONFIG level of the CLI by entering the following command.
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
41
3
IP address configuration
NetIron# configure terminal
NetIron(config)#
3. Enter the following command to set the super-user password.
NetIron(config)# enable super-user-password <text>
NOTE
You must set the super-user password before you can set other types of passwords.
4. Enter the following commands to set the port configuration and read-only passwords.
NetIron(config)# enable port-config-password <text>
NetIron(config)# enable read-only-password <text>
NOTE
If you forget your super-user password, see the Release Notes.
Syntax: enable super-user-password | read-only-password | port-config-password <text>
Passwords can be up to 48 characters long.
IP address configuration
The NetIron CES and NetIron CER 2000 Series devices implement separate data and control
planes. This architecture affects how you assign IP addresses. Table 9 outlines the interfaces to
which you can assign IP addresses.
In this table, “in band” refers to an interface over which user packets are routed, while “out of
band” refers to an interface over which control packets related to system management are
forwarded.
TABLE 9
Assigning IP addresses
Interface
Associated physical port
Out of band/
In band
Management interface
Ethernet 10/100/1000 port on active
management module
Out of band
Any interface over which user packets are
routed
Any interface module port
In band
Any virtual interface over which user
packets are routed
Any interface port
In band
Loopback interface
–
In band
This section describes the following:
• NetIron CES and NetIron CER 2000 Series support of sub-net masks
• How to assign an IP address to a management interface
• How to assign an IP address to an interface or virtual interface over which user packets are
routed
42
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
IP address configuration
3
Support of sub-net masks
The NetIron CES and NetIron CER 2000 Series devices support both classical IP network masks
(Class A, B, and C sub-net masks, and so on) and Classless Interdomain Routing (CIDR) network
prefix masks.
The following sub-net masks are supported by the NetIron CES and NetIron CER 2000 Series:
• To enter a classical network mask, enter the mask in IP address format. For example, enter
“209.157.22.99 255.255.255.0” for an IP address with a Class-C sub-net mask.
• To enter a prefix number for a network mask, enter a forward slash (/) and the number of bits
in the mask immediately after the IP address. For example, enter “209.157.22.99/24” for an
IP address that has a network mask with 24 significant (“mask”) bits.
Assigning an IP address to a management interface
Instead of assigning a global IP address to the NetIron CES and NetIron CER 2000 Series device for
system management purposes, you now assign an IP address to the management interface. The IP
address is assigned to the active management module port. If the active management module
becomes unavailable and the redundant module becomes the active module, the IP address is
assigned to the new active management module port.
For example, to assign the IP address 10.0.1.1 to the management interface, do the following.
1. At the opening CLI prompt, enter enable.
NetIron> enable
2. Enter the following command at the Privileged EXEC level prompt (for example, NetIron#), then
press Enter. This command erases the factory test configuration if still present.
NetIron# erase startup-config
CAUTION
Use the erase startup-config command only for new systems. If you enter this command on a
system you have already configured, the command erases the configuration. If you accidentally
erase the configuration on a configured system, enter the write memory command to save the
running configuration to the startup-config file.
3. Access the configuration level of the CLI by entering the following command.
NetIron# configure terminal
NetIron(config)#
Privileged EXEC Level
Global CONFIG Level
4. Configure the IP address and mask for the management interface by entering the following
commands.
NetIron(config)# interface management 1
NetIron(config-if-mgmt-1)# ip address 10.0.1.1 255.255.255.0
Syntax: enable [<password>]
Syntax: configure terminal
Syntax: interface management 1
Syntax: [no] ip address <ip-addr> <ip-mask>
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
43
3
IP address configuration
or
Syntax: [no] ip address <ip-addr>/<mask-bits>
Assigning an IP address to an interface, virtual interface, or loopback
As you have done with other Brocade devices, you must assign an IP address to each interface and
virtual interface over which user packets are routed. You can also assign an IP address to a
loopback interface, which is generally used for testing and diagnostic purposes.
You must use the serial connection to assign the first IP address. For subsequent addresses, you
also can use the CLI through Telnet. You can use IronView Network Manager to assign IP addresses
to virtual routing interfaces only.
By default, you can configure up to 24 IP interfaces on each interface, virtual interface, and
loopback interface.
For example, to assign the IP address 192.22.3.44 and sub-net mask 255.255.255.0 to Ethernet
interface 1/1, do the following.
1. At the opening CLI prompt, enter enable.
NetIron> enable
2. Enter the following command at the Privileged EXEC level prompt, then press Enter. This
command erases the factory test configuration if still present.
NetIron# erase startup-config
CAUTION
Use the erase startup-config command only for new systems. If you enter this command on a
system you have already configured, the command erases the configuration. If you accidentally
erase the configuration on a configured system, enter the write memory command to save the
running configuration to the startup-config file.
3. Access the configuration level of the CLI by entering the following command.
NetIron# configure terminalPrivileged EXEC Level
NetIron(config)#
Global CONFIG Level
4. Configure the IP address and sub-net mask for Ethernet interface 1/1 by entering the following
commands.
NetIron(config)# interface ethernet 1/1
NetIron(config-if-e10000-1/1)# ip address 192.22.3.44 255.255.255.0
Syntax: enable [<password>]
Syntax: configure terminal
Syntax: [no] ip address <ip-addr> <ip-mask> [secondary]
or
Syntax: [no] ip address <ip-addr>/<mask-bits> [secondary]
Use the secondary parameter if you have already configured an IP address within the same sub-net
on the interface.
44
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
Management port function overview
3
Enabling and disabling the interfaces
By default, all NetIron CES and NetIron CER 2000 Series interfaces are disabled. To enable an
interface, you must enter the enable command at the appropriate interface configuration level of
the CLI. For example, to enable the management interface, enter the enable command at the
management interface configuration level of the CLI.
NetIron(config-if-mgmt-1)# enable
Syntax: enable
You can disable each of these interfaces using the disable command at the appropriate interface
configuration level of the CLI. For example, to disable the management port, enter the disable
command at the management interface configuration level of the CLI.
NetIron(config-if-mgmt-1)# disable
Syntax: disable
NOTE
For security reasons, by default, the telnet server is disabled on the NetIron CES and NetIron CER
2000. To enable the telnet server and allow access through telnet to the device from an external
host, execute the following.
NetIron(config)# telnet server
Management port function overview
You must be aware of how the NetIron CES and NetIron CER 2000 Series system’s management
port functions as described in the following:
• The management port allows you to configure, monitor, and manage the NetIron CES and
NetIron CER 2000 Series system only. As a result, this port has the same limited functionality
as an IP host port.
• You cannot enable and run routing protocols on the management port.
• The management port supports static routes and directly connected routes, which are
installed in the management module’s routing table. However, these routes are not installed in
the interface module’s routing table. Therefore, the interface modules are not aware of the
management port’s static or directly connected routes.
• If you configure the redistribution of directly connected or static routes for a particular routing
protocol, the routing protocol will redistribute directly connected or static routes associated
with the interface module ports but not those associated with the management port.
To display configuration information and statistics about the management port, you can enter the
show interface management 1 command at any CLI level.
Device connection
You can connect a NetIron CES and NetIron CER 2000 Series device to another Ethernet network
device. The NetIron CES and NetIron CER 2000 Series devices support connections to other
vendors’ as well as Brocade network devices.
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
45
3
Device connection
To connect a NetIron CES and NetIron CER 2000 Series device to another network device, you
must do the following:
• Install the fiber-optic modules if required
• Cable the modules with either copper cable or fiber optic cable as required
For information on installing fiber-optic modules see “Installing a new fiber optic module” on
page 71.
For information on cabling a fiber-optic module, see “Cabling a fiber optic module” on page 72.
For information on cleaning a fiber-optic module, see “Fiber optic connector cleaning” on page 72.
46
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
Chapter
Device Management Applications Familiarization
4
Management application overview
This chapter describes the different applications you can use to manage the NetIron CES and
NetIron CER 2000 Series devices. The NetIron CES and NetIron CER 2000 Series devices support
the same management applications as other Brocade devices.
As with other Brocade devices, you can manage a NetIron CES and NetIron CER 2000 Series device
using any of the following applications:
• Command Line Interface (CLI) – a text-based interface accessible directly from a PC or terminal
attached to the device’s serial (Console) port or 10BaseT/100BaseTX Ethernet (management)
port, or from a Telnet connection to the PC or terminal.
• IronView Network Manager – An optional SNMP-based standalone GUI application. For more
information see the IronWare MIB Reference.
The following section describes how to log on to these applications.
CLI Functionality
Once an IP address is assigned to the NetIron CES and NetIron CER 2000 Series device’s
management port, you can access the CLI through a PC or terminal attached to the device’s serial
(Console) port or 10BaseT/100BaseTX Ethernet (management) port, or from a Telnet or SSH
connection to the PC or terminal.
You can initiate a local Telnet, SSH or SNMP connection by specifying the management port’s IP
address.
The commands in the CLI are organized into the following levels:
• User EXEC – Lets you display information and perform basic tasks such as pings and
traceroutes.
• Privileged EXEC – Lets you use the same commands as those at the User EXEC level plus
configuration commands that do not require saving the changes to the system-config file.
• CONFIG – Lets you make configuration changes to the device. To save the changes across
software reloads and system resets, you need to save them to the system-config file. The
CONFIG level contains sub-levels for individual ports, for VLANs, for routing protocols, and other
configuration areas.
NOTE
By default, any user who can open a direct or Telnet connection to a NetIron CES and NetIron CER
2000 Series device can access all these CLI levels. To secure access, you can configure Enable
passwords or local user accounts, or you can configure the device to use a RADIUS or
TACACS/TACACS+ server for authentication. Refer to Security Guide.
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
47
4
CLI Functionality
Online help
To display a list of available commands or command options, enter “?” or press Tab. If you have not
entered part of a command at the command prompt, all the commands supported at the current
CLI level are listed. If you enter part of a command, then enter “?” or press Tab, the CLI lists the
options you can enter at this point in the command string.
If you enter an invalid command followed by ?, a message appears indicating the command was
unrecognized. For example.
NetIron (config)# rooter ip?
Unrecognized command
Command completion
The CLI supports command completion, so you do not need to enter the entire name of a command
or option. As long as you enter enough characters of the command or option name to avoid
ambiguity with other commands or options, the CLI understands what you are typing.
Scroll control
By default, the CLI uses a page mode to paginate displays that are longer than the number of rows
in your terminal emulation window. For example, if you display a list of all the commands at the
global CONFIG level but your terminal emulation window does not have enough rows to display
them all at once, the page mode stops the display and lists your choices for continuing the display.
Here is an example.
aaa
access-list
all-client
arp
banner
base-mac-addr
boot
some lines omitted for brevity...
default-vlan-id
enable
enable-acl-counter
end
exit
--More--, next page: Space, next line: Return key, quit: Control-c
The software provides the following scrolling options:
• Press the Space bar to display the next page (one screen at time).
• Press the Return or Enter key to display the next line (one line at a time).
• Press Ctrl-C cancel the display.
Line editing commands
The CLI supports the following line editing commands. To enter a line-editing command, use the
CTRL-key combination for the command by pressing and holding the CTRL key, then pressing the
letter associated with the command.
48
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
CLI Functionality
TABLE 10
4
CLI line editing commands
Ctrl-key combination
Description
Ctrl-A
Moves to the first character on the command line.
Ctrl-B
Moves the cursor back one character.
Ctrl-C
Escapes and terminates command prompts and ongoing tasks (such as
lengthy displays), and displays a fresh command prompt.
Ctrl-D
Deletes the character at the cursor.
Ctrl-E
Moves to the end of the current command line.
Ctrl-F
Moves the cursor forward one character.
Ctrl-K
Deletes all characters from the cursor to the end of the command line.
Ctrl-L; Ctrl-R
Repeats the current command line on a new line.
Ctrl-N
Enters the next command line in the history buffer.
Ctrl-P
Enters the previous command line in the history buffer.
Ctrl-U; Ctrl-X
Deletes all characters from the cursor to the beginning of the command
line.
Ctrl-W
Deletes the last word you typed.
Ctrl-Z
Moves from any CONFIG level of the CLI to the Privileged EXEC level; at the
Privileged EXEC level, moves to the User EXEC level.
For a complete list of CLI commands and syntax information for each command, refer to NetIron
Service Provider Configuration and Management Guide.
Searching and filtering output from CLI commands
You can filter CLI output from show commands and at the --More-- prompt. You can search for
individual characters, strings, or construct complex regular expressions to filter the output.
Searching and filtering output from show commands
You can filter output from show commands to display lines containing a specified string, lines that
do not contain a specified string, or output starting with a line containing a specified string. The
search string is a regular expression consisting of a single character or string of characters. You
can use special characters to construct complex regular expressions. Refer to “Using special
characters in regular expressions” on page 52 for information on special characters used with
regular expressions.
Displaying lines containing a specified string
The following command filters the output of the show interface command for port 3/1 so it displays
only lines containing the word “Internet”. This command can be used to display the IP address of
the interface.
NetIron # show interface e 3/1 | include Internet
Internet address is 192.168.1.11/24, MTU 1518 bytes, encapsulation ethernet
Syntax: <show-command> | include <regular-expression>
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
49
4
CLI Functionality
NOTE
The vertical bar (|) is part of the command.
Note that the regular expression specified as the search string is case sensitive. In the example
above, a search string of “Internet” would match the line containing the IP address, but a search
string of “Internet” would not.
Displaying lines that do not contain a specified string
The following command filters the output of the show who command so it displays only lines that
do not contain the word “closed”. This command can be used to display open connections to a
NetIron CES or NetIron CER 2000 Series device.
NetIron # show who | exclude closed
Console connections:
established
you are connecting to this session
2 seconds in idle
Telnet connections (inbound):
1
established, client ip address 192.168.9.37
27 seconds in idle
Telnet connection (outbound):
SSH connections:
Syntax: <show-command> | exclude <regular-expression>
Displaying lines starting with a specified string
The following command filters the output of the show who command so it displays output starting
with the first line that contains the word “SSH”. This command can be used to display information
about SSH connections to the NetIron CES or NetIron CER 2000 Series device.
NetIron # show who | begin SSH
SSH connections:
1
established, client ip address 192.168.9.210
7 seconds in idle
2
closed
3
closed
4
closed
5
closed
Syntax: <show-command> | begin <regular-expression>
Searching and filtering output at the --More-- prompt
The --More-- prompt displays when output extends beyond a single page. From this prompt, you
can press the Space bar to display the next page, the Return or Enter key to display the next line, or
Ctrl-C to cancel the display. In addition, you can search and filter output from this prompt. For
example.
50
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
CLI Functionality
4
NetIron # ?
append
attrib
boot
cd
chdir
clear
clock
configure
copy
cp
debug
delete
dir
dm
dot1x
erase
exit
fastboot
force-sync-standby
Append one file to another
Change file attribute
Boot system from bootp/tftp server/flash image
Change current working directory
Change current working directory
Clear table/statistics/keys
Set clock
Enter configuration mode
Copy between flash, tftp, config/code
Copy file commands
Enable debugging functions (see also 'undebug')
Delete file on flash
List files
test commands
802.1X
Erase image/configuration files from flash
Exit Privileged mode
Select fast-reload option
Sync active flash (pri/sec/mon/startup config/lp images)
to standby
format
Format PCMCIA card
hd
Hex dump
ipc
IPC commands
--More--, next page: Space, next line: Return key, quit: Control-c
At the --More-- prompt, you can press the forward slash key (/) and then enter a search string.
The device displays output starting from the first line that contains the search string, similar to the
begin option for show commands. For example.
--More--, next page: Space, next line: Return key, quit: Control-c
/telnet
The results of the search are displayed.
searching...
telnet
terminal
traceroute
undelete
whois
write
Telnet by name or IP address
Change terminal settings
TraceRoute to IP node
Recover deleted file
WHOIS lookup
Write running configuration to flash or terminal
To display lines containing only a specified search string (similar to the include option for show
commands) press the plus sign key (+) at the --More-- prompt and then enter the search string.
--More--, next page: Space, next line: Return key, quit: Control-c
+telnet
The filtered results are displayed.
filtering...
telnet
Telnet by name or IP address
To display lines that do not contain a specified search string (similar to the exclude option for show
commands) press the minus sign key (-) at the --More-- prompt and then enter the search string.
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
51
4
CLI Functionality
--More--, next page: Space, next line: Return key, quit: Control-c
-telnet
The filtered results are displayed.
filtering...
sync-standby
terminal
traceroute
undelete
whois
write
Sync active flash (pri/sec/mon/startup config/lp images)
to standby if different
Change terminal settings
TraceRoute to IP node
Recover deleted file
WHOIS lookup
Write running configuration to flash or terminal
As with the commands for filtering output from show commands, the search string is a regular
expression consisting of a single character or string of characters. You can use special characters
to construct complex regular expressions. See the next section for information on special
characters used with regular expressions.
Using special characters in regular expressions
You use a regular expression to specify a single character or multiple characters as a search string.
In addition, you can include special characters that influence the way the software matches the
output against the search string. These special characters are listed in the following table.
TABLE 11
Special characters for regular expressions
Character
Operation
.
The period matches on any single character, including a blank space.
For example, the following regular expression matches “aaz”, “abz”, “acz”, and so on, but not just
“az”:
a.z
*
The asterisk matches on zero or more sequential instances of a pattern.
For example, the following regular expression matches output that contains the string “abc”,
followed by zero or more Xs:
abcX*
+
The plus sign matches on one or more sequential instances of a pattern.
For example, the following regular expression matches output that contains "de", followed by a
sequence of “g”s, such as “deg”, “degg”, “deggg”, and so on:
deg+
?
The question mark matches on zero occurrences or one occurrence of a pattern.
For example, the following regular expression matches output that contains "dg" or "deg":
de?g
NOTE: Normally when you type a question mark, the CLI lists the commands or options at that CLI
level that begin with the character or string you entered. However, if you enter Ctrl-V and then
type a question mark, the question mark is inserted into the command line, allowing you to
use it as part of a regular expression.
^
52
A caret (when not used within brackets) matches on the beginning of an input string.
For example, the following regular expression matches output that begins with “deg”:
^deg
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
CLI Functionality
TABLE 11
4
Special characters for regular expressions (Continued)
Character
Operation
$
A dollar sign matches on the end of an input string.
For example, the following regular expression matches output that ends with “deg”:
deg$
_
An underscore matches on one or more of the following:
• , (comma)
• { (left curly brace)
• } (right curly brace)
• ( (left parenthesis)
• ) (right parenthesis)
• The beginning of the input string
• The end of the input string
• A blank space
For example, the following regular expression matches on “100” but not on “1002”, “2100”, and so
on:
_100_
[]
Square brackets enclose a range of single-character patterns.
For example, the following regular expression matches output that contains “1”, “2”, “3”, “4”, or “5”:
[1-5]
You can use the following expression symbols within the brackets. These symbols are allowed only
inside the brackets.
• ^ – The caret matches on any characters except the ones in the brackets. For example, the
following regular expression matches output that does not contain “1”, “2”, “3”, “4”, or “5”:
•
[^1-5]
- The hyphen separates the beginning and ending of a range of characters. A match occurs if
any of the characters within the range is present. See the example above.
|
A vertical bar separates two alternative values or sets of values. The output can match one or the
other value.
For example, the following regular expression matches output that contains either “abc” or “defg”:
abc|defg
()
Parentheses allow you to create complex expressions.
For example, the following complex expression matches on “abc”, “abcabc”, or “defg”, but not on
“abcdefgdefg”:
((abc)+)|((defg)?)
If you want to filter for a special character instead of using the special character as described in the
table above, enter “\” (backslash) in front of the character.
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
53
4
54
CLI Functionality
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
Chapter
Hardware Maintenance
5
Hardware maintenance schedule
DANGER
The procedures in this manual are for qualified service personnel.
The NetIron CES and NetIron CER 2000 Series device requires minimal maintenance for its
hardware components. Brocade recommends cleaning the fiber-optic connectors on a fiber-optic
port and the connected fiber cable each time you disconnect the cable.
Otherwise, you can install or replace the following hardware components as needed:
•
•
•
•
Copper and fiber optic modules
Power supplies
Fan tray
2 x10-Gigabit Ethernet module (only on the NetIron CES 2024C, NetIron CES 2024F, NetIron
CER 2024C, and NetIron CER 2024F models).
Power supply replacement
You can replace a power supply while the NetIron CES and NetIron CER 2000 Series device is
powered on and running. The power supplies are located in slots at the rear of the device.
This section provides information about the following topics:
• Installation precautions and warnings
• Determining which power supply has failed, if necessary.
• Replacing a power supply.
DANGER
Power supplies are hot swappable. However, Brocade recommends that you disconnect the
power supply from AC power before installing or removing the supply. The device can be running
while a power supply is being installed or removed, but the power supply itself should not be
connected to a power source. Otherwise, you could be injured or the power supply or other parts
of the device could be damaged.
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
55
5
Power supply replacement
Installation precautions and warnings
Follow these precautions when installing a power supply in the NetIron CES and NetIron CER 2000
Series device.
DANGER
Before beginning the installation, refer to the precautions in “Power precautions” on page 21.
CAUTION
Do not install the device in an environment where the operating ambient temperature might
exceed
40o C (104o F).
CAUTION
Never leave tools inside the chassis.
Determining which power supply failed
If you are replacing a power supply that has failed and you are not sure which supply has failed,
enter the following command at any CLI command prompt.
NetIron>show chassis
*** NetIron CES 2024C ***
---POWERS -----POWERS --Power 1 ( 3I50
- AC 504W): Installed (OK)
Power 2: not present
Total power budget for system = 504 W
--- FANS --Metro fan tray
Metro fan tray
Metro fan tray
Metro fan tray
Metro fan tray
Metro fan tray
(fan
(fan
(fan
(fan
(fan
(fan
1):
2):
3):
4):
5):
6):
Status
Status
Status
Status
Status
Status
=
=
=
=
=
=
OK,
OK,
OK,
OK,
OK,
OK,
Speed
Speed
Speed
Speed
Speed
Speed
=
=
=
=
=
=
MED
MED
MED
MED
MED
MED
(75%)
(75%)
(75%)
(75%)
(75%)
(75%)
--- TEMPERATURE READINGS --CPU: Ambience 35.50C Chip 39.68C
24X1G PPCR: Ambience 36.0C Chip 47.56C
2X10G PPCR: Ambience 37.50C Chip 43.31C
Fans are in auto mode. Temperature Monitoring Poll Period is 60 seconds
--- MISC INFO --Backplane EEPROM MAC Address:
NetIron>
56
0001.0040.7800
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
Power supply replacement
5
This command displays status information for the power supplies and the fans. The power supplies
are numbered from left to right. These numbers assume you are facing the front of the device, not
the rear.
If the display indicates “Installed (Failed)” for any of the slots, the power supply installed in that
particular slot has failed.
AC power supply
FIGURE 31
AC power supply
Power supplies for the NetIron CES and NetIron CER 2000 Series
devices
The NetIron CES and NetIron CER 2000 Series devices ship with one alternating-current (AC) power
supply or direct-current (DC) power supply. All models have two power supply slots, enabling you to
install a second power supply for redundancy. If desired, you can install a second supply for
redundancy.
If you need to install a redundant power supply, it may be easier to install it before mounting the
device, although the power supplies are “hot swappable” and can be installed or removed after the
device is mounted and powered on.
CAUTION
Changes or modifications made to this device that are not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
57
5
Power supply replacement
Removing the AC power supply
CAUTION
Do not use an electric screwdriver when installing or uninstalling power supplies.
Required tools
You will need the following tool to perform this procedure:
• #2 Phillips-head screwdriver
The following procedures are required when removing an AC power supplies from NetIron CES and
NetIron CER 2000 Series devices.
1. Unplug the power supply from the power source.
2. Disconnect the power cord from the power supply.
3. Unscrew the two power supply locking screws located at the top left and bottom right hand
corner of the power supply.
FIGURE 32
Power supply screw location
1
1
Power supply locking screws
4. Pull the power supply outward once the screws have been unscrewed. This will disconnect the
power supply from the backplane.
58
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
Power supply replacement
FIGURE 33
5
Removing the power supply from the device
5. Continue to pull the power supply until it is removed from the device.
6. Place the power supply in an anti-static bag for storage.
7.
Insert a new supply, or place and screw in a cover plate over the empty power supply. Refer to
“Installing the AC power supply” on page 59 for details.
Installing the AC power supply
Perform the following steps to install an AC power supply.
1. Remove the power supply or cover plate currently in the power supply bay you wish to install
the power supply in. Refer to “Removing the AC power supply” on page 58 for details.
2. Remove the new power supply from its packaging.
3. With one hand, support the underside of the power supply and insert the power supply into the
empty power supply slot. Press until the supply is completely in the slot, so that the connectors
on the back of the supply are fully engaged with the pins on the power backplane.
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
59
5
Power supply replacement
FIGURE 34
Power supply installation
2
1
CAUTION
Make sure you insert the power supply right-side up. It is possible to insert the supply upside
down, although the supply will not engage with the power backplane when upside down. The
power supply is right-side up when the manufacturer label is on the top.
4. Tighten the two power supply locking screws located at the top left and bottom right hand
corner of the power supply.
5. Connect the power cord to the power supply.
Removing the DC power supply
CAUTION
Do not use an electric screwdriver when installing or uninstalling power supplies.
Required tools
You will need the following tool to perform this procedure:
• #2 Phillips-head screwdriver
The following procedures are required when removing an DC power supplies from NetIron CES and
NetIron CER 2000 Series devices.
60
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
Power supply replacement
5
1. Remove the wires from your DC power source.
2. Unscrew the two assembly screws to unlock the DC wiring assembly (Figure 35) and remove
the adapter.
3. Loosen the wire tightening screws to remove the wires (Figure 36) from the DC wiring
assembly.
FIGURE 35
DC power supply screws
1
2
1
Chassis attachment screws
2
Assembly screws
4. Unscrew the chassis attachment screws to unlock the power supply itself (Figure 35).
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
61
5
Power supply replacement
FIGURE 36
The DC wiring assembly
1
2
1
Wire tightening screws
2
Assembly screws
5. Pull the power supply outward once the screws have been unscrewed. This will disconnect the
power supply from the backplane. Pull it completely free of the chassis.
6. Place the power supply in an anti-static bag for storage.
7.
Insert a new supply, or place and screw in a cover plate over the empty power supply. Refer to
“Installing a DC power supply” on page 62 for details.
Installing a DC power supply
DANGER
Before beginning the installation, refer to the precautions in “Power precautions” on page 21.
Use the following procedures for DC power supplies in NetIron CES and CER 2000 Series devices.
Follow the steps given below to install an DC power supply.
1. If necessary, remove the power supply locking screws located in the upper left and the bottom
right of the device.
2. If the empty power supply bay has a cover plate, remove the two screws near the edges of the
cover plate to unlock the plate, then remove the plate.
3. Remove the DC power supply from its packaging (Figure 37).
62
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
Power supply replacement
FIGURE 37
5
The DC power supply
4. Insert the wires into the DC wiring assembly (Figure 38).
5. Use the wire tightening screws to secure the wires.
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
63
5
Power supply replacement
FIGURE 38
The DC wiring assembly
1
2
1
Wire tightening screws
2
Assembly screws
6. With one hand, hold the bar on the front panel of the power supply. With the other hand,
support the underside of the power supply, and insert the power supply into the empty power
supply slot. Press until the supply is completely in the slot, so that the connectors on the back
of the supply are fully engaged with the pins on the power backplane (Figure 34).
CAUTION
Make sure you insert the power supply right-side up. It is possible to insert the supply upside
down, although the supply will not engage with the power backplane when upside down. The
power supply is right-side up when the manufacturer label is on the top.
7.
64
Secure the two screws near the edges of the supply to lock the supply in place (Figure 39).
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
Power supply replacement
FIGURE 39
5
DC power supply screws
1
2
1
Chassis attachment screws
2
Assembly screws
8. Connect the wire to your DC power source, making sure to connect the -48V cable to the
negative terminal on the power supply and the 0V cable to the positive terminal as marked on
the power supply.
The equipment installation must meet NEC/CEC code requirements. Consult local authorities for
regulations.
DANGER
DC return shall be isolated from the chassis ground (DC-I) when connections to the power supply
are made.
CAUTION
For the NEBS compliant installation of a NetIron CES or NetIron CER 2000 Series devices with AC
and DC system use a ground wire of at least 6 American Wire Gauge (AWG). The ground wire
should have an agency-approved crimped connector (provided with the chassis) attached to one
end, with the other end grounded to either a common bonding network or an isolated bonding
network. The connector must be crimped with the proper tool, allowing it to be connected to both
ground screws on the enclosure. Before crimping the ground wire into the provided ground lug,
insure the bare copper wire has been cleaned and antioxidant is applied to the bare wire.
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
65
5
Power supply replacement
CAUTION
To insure adequate bonding when attaching the provided Panduit LCD6-10AF two-hole ground
lug, a minimum of 20 PSI of torque is required to be applied to the mounting hardware used to
attach the ground lug. Use a star washer to ensure an NEBS compliant connection.
Verifying proper operation
To verify the proper operation of the power supply after power on, you can observe the LEDs on the
power supply.
After the NetIron CES or NetIron CER 2000 Series device powers on, you can observe the LEDs on
the front of the device to verify that it initialized successfully. There is a single LED on the power
supply which should be steady green when the power supply is receiving power and under normal
operation.Table 1 outlines the LEDs, the desired state of each LED, possible abnormal states of
each LED, and what to do if an LED indicates an abnormal state.
To verify proper operation, complete the following steps.
1. Verify that the power supply's LED is steady green on the back of the device.
2. Verify that the power supply was placed in power supply bay #1 and operational by observing a
steady green LED lighting up "P1" on the front of the device.
66
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
Power supply replacement
TABLE 12
5
LEDs for power and fans (located on front of device )
LED
State
Meaning
Fan (labeled Fn)
Green
The fan tray is powered on and is operating
normal.
Amber/Green
Blinking
The fan tray is not plugged in.
Amber
The fan tray is plugged in but one or more fans
are faulty.
Off
Power supply 1 is not installed or is not
providing power.
Amber
Power supply 1 is installed, but not connected
or a fault is detected.
Green
Power supply 1 is installed and is functioning
normally.
Off
Power supply 2 is not installed or is not
providing power.
Amber
Power supply 2 is installed, but not connected
or a fault is detected.
Green
Power supply 2 is installed and is functioning
normally.
AC PS1 (labeled P1)
AC PS2 (labeled P2)
Power Supplies DC - same indications for both DC power supplies
DC
Off
Power supply is not installed or is not providing
power
Amber
Power supply is installed, but not connected or
a fault is detected.
Green
Supply has DC power, is enabled, and has good
output.
The software regularly polls the hardware for power status information. You can display the status
information from any management session. In addition, the software automatically generates a
Syslog message and SNMP trap if a status change occurs.
Displaying the status of the power supplies
You can display the status of the power supplies by entering the show chassis command at any
level of the CLI. The display shows whether a power supply is installed in the specified power supply
slot and the status of the power supply. If you are not already attached to a terminal or a PC
running terminal emulation, see “PC or terminal attachment” on page 39
NetIron CES 2048CX>show chassis
*** NetIron CES 2048CX ***
---POWERS --Power 1 ( 3I50
- AC 504W): Installed (OK)
Power 2: not present
Total power budget for system = 504 W
--- FANS --Metro fan tray (fan 1): Status = OK, Speed = LOW (50%)
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
67
5
10-Gigabit Ethernet module installation or replacement
Metro
Metro
Metro
Metro
Metro
fan
fan
fan
fan
fan
tray
tray
tray
tray
tray
(fan
(fan
(fan
(fan
(fan
2):
3):
4):
5):
6):
Status
Status
Status
Status
Status
=
=
=
=
=
OK,
OK,
OK,
OK,
OK,
Speed
Speed
Speed
Speed
Speed
=
=
=
=
=
LOW
LOW
LOW
LOW
LOW
(50%)
(50%)
(50%)
(50%)
(50%)
--- TEMPERATURE READINGS --CPU: Board 32.50C Chip 41.6C
481XG PPCR1: Board 32.50C Chip 43.31C
481XG PPCR2: Board 29.50C Chip 41.93C
2X10G PPCR: Board 33.0C Chip 41.68C
Fans are in auto mode. Temperature Monitoring Poll Period is 60 seconds
Base MAC Address = 001b.ed39.0300
NetIron CES 2048CX>
Syntax: show chassis
10-Gigabit Ethernet module installation or replacement
The 2-port 10-Gigabit Ethernet modules may optionally be installed or replaced in the field on the
NetIron CES 2024C, NetIron CES 2024F, NetIron CER 2024C, and NetIron CER 2024F units. You
can order the NetIron CES and NetIron CER 2000 Series with a 2 x10-Gigabit module installed at
the factory, or you can upgrade your device later.
This section provides the steps for installing, removing, and replacing the 10-Gigabit Ethernet
module. You will need the following tools to perform these procedures:
• #2 Phillips-head screwdriver
• Electrostatic Discharge (ESD) kit
CAUTION
For safety reasons, the ESD wrist strap should contain a series 1 Meg ohm resistor
CAUTION
Do not use an electric screwdriver when installing or uninstalling 2x10G modules.
Removing a 2 x10-Gigabit Ethernet module
Follow the procedure given below while removing a 2 x10-Gigabit Ethernet module.
1. Power off the NetIron CES or NetIron CER 2000 Series device.
2. Use a #2 Phillips-head screwdriver to loosen the screws on the 2 x10-Gigabit module.
3. Remove the 2 x10-Gigabit module.
4. Place the 2 x10-Gigabit module in an anti-static bag for storage.
5. If you are removing the module without replacing it, install the blank faceplate in the front
panel.
68
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
Replacing the NetIron CES and the NetIron CER Series fan tray
5
Installing a 2 x10-Gigabit Ethernet Module
Follow these procedures when installing a 10-Gigabit Ethernet Module.
1. Power off the NetIron CES or NetIron CER 2000 Series device.
2. Use a #2 Phillips-head screwdriver to remove the blank faceplate or old module from the front
panel.
3. Install the 10-Gigabit module in the chassis.
4. Use a #2 Phillips-head screwdriver to fasten the screws on the 2 x10-Gigabit module. Affix the
screws loosely at first, then tighten them once you are sure the board is properly positioned.
Replacing the NetIron CES and the NetIron CER Series fan tray
The NetIron Series devices cooling fans use pull configuration to move the air from the front to the
back of the device.
The fans in the NetIron Series devices include six four-speed fans that operate at low speed,
medium speed, medium-high speed, and high speed based on the ambient temperature and
configured or default temperature thresholds. All fans operate simultaneously at the same speed.
If a single fan fails within the assembly, the fan tray should be replaced. The fan tray is hot
swappable.
The system uses a default or configured temperature threshold associated with it to determine at
which speed the fan should operate. If desired, you can change the settings of the temperature
thresholds associated with fan speed switches.
If a NetIron CES and the NetIron CER Series device remains operational during a fan tray
replacement, the procedure must be completed within 30 seconds.
NOTE
Fan trays are hot swappable. Hot swapping fan trays should be done within 30 seconds so the unit
will continue to function correctly without any fans. However, Brocade recommends that you
disconnect the power supply from AC or DC power before installing or removing the fan tray.
To replace the NetIron CES 2000 Series fan tray, follow these steps.
1. Power down and unplug the chassis.
2. Unscrew the two screws that secure the fan tray to the chassis.
FIGURE 40
Replacing the fan tray
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
69
5
Fiber optic module replacement
3. Slide the fan tray out
4. Slide the new fan tray in and tighten the screws to secure it to the chassis.
5. Plug the chassis back in and power up..
Fiber optic module replacement
You can remove an SFP or XFP from a port and replace it with a new one while the NetIron CES and
NetIron CER 2000 Series device is powered on and running.
This section provides information about the following tasks:
• Removing a fiber optic module
• Installing a new fiber optic module
• Cabling a fiber optic module
Removing a fiber optic module
You can remove a fiber SFP (also called a mini-GBIC) or an XFP from a port while the NetIron CES
and NetIron CER 2000 Series device is powered on and running.
Before removing a fiber optic module, have the following on hand:
• An ESD wrist strap with a plug for connection to the ESD connector on the device.
CAUTION
For safety reasons, the ESD wrist strap should contain a series 1 Meg ohm resistor.
70
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
Fiber optic module replacement
5
• The protective covering that you removed from the fiber optic module when you initially
installed the module.
Follow the steps given below to remove a fiber optic module from a Gigabit Ethernet or 10-Gigabit
Ethernet port.
1. Put on the ESD wrist strap and ground yourself by attaching the clip end to a metal surface
(such as an equipment rack).
2. Disconnect the fiber cable connector from the port connector.
3. Insert the protective covering into the port connectors.
4. Pull the fiber optic module out of the port by pulling the bail latch forward, away from the front
panel of the module. This unlocks the module from the front panel.
1
1
Bail latch
NOTE
The bail latch may be attached to either the top or the bottom of the mini-GBIC.
5. Grasping the bail latch, pull the fiber optic module out of the port.
6. Store the fiber optic module in a safe, static-free place or in an anti-static bag.
7.
Install a new fiber optic module in the port. For information about performing this task, refer to
“Installing a new fiber optic module” on page 71.
Installing a new fiber optic module
You must install a fiber optic module (SFP or XFP transceiver) in each Gigabit Ethernet and
10-Gigabit Ethernet fiber port you want to use.
You can install a new fiber optic module in a port while the NetIron CES and NetIron CER 2000
Series device is powered on and running.
Before installing one of these modules into the port, obtain an ESD wrist strap with a plug for
connection to a metal surface.
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
71
5
Fiber optic connector cleaning
CAUTION
All fiber-optic interfaces use Class 1 Lasers.
CAUTION
For safety reasons, the ESD wrist strap should contain a series 1 Meg ohm resistor.
Perform the following tasks to install a fiber optic module.
1. Put on the ESD wrist strap and ground yourself by attaching the clip end to a metal surface
(such as an equipment rack) to act as ground.
2. Remove the new module from its protective packaging.
3. Gently insert the fiber optic module into the port until the module clicks into place. The module
is keyed to prevent incorrect insertion.
Cabling a fiber optic module
Follow the steps given below to cable a fiber optic module
1. Remove the protective covering from the fiber-optic port connectors and store the covering for
future use.
2. Before cabling a fiber optic module, Brocade strongly recommends cleaning the cable
connectors and the port connectors. Refer to “Fiber optic connector cleaning” on page 72.
3. Gently insert the cable connectors (a tab on each connector should face upward) into the port
connectors until the tabs lock into place.
4. Observe the link and active LEDs to determine if the network connections are functioning
properly.
DANGER
The intra-building ports of the equipment or subassembly is suitable for connection to
intra-building or unexposed wiring or cabling only. The intra-building ports of the equipment or
subassembly MUST NOT be metallically connected to interfaces that connect to the OSP or its
wiring. These interfaces are designed for use as intra-building interfaces only (Type 2 or Type 4
ports as described in GR-1089-CORE, Issue 4) and require isolation from the exposed OSP
cabling. The addition of Primary Protectors is not sufficient protection in order to connect these
interfaces metallically to OSP wiring.
Fiber optic connector cleaning
To avoid problems with the connection between the fiber optic module (SFP (mini-GBIC) or XFP)
and the fiber cable connectors, Brocade strongly recommends cleaning both connectors each time
you disconnect and reconnect them. In particular, dust can accumulate in the connectors and
cause problems such as reducing the optic launch power.
72
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
Fiber optic connector cleaning
5
To clean the fiber cable connectors, Brocade recommends using the fiber-optic reel-type cleaner
that shipped with your NetIron CES and NetIron CER 2000 Series device. You can also purchase
this type of cleaner from the following web site.
http://www.fisfiber.com/
When not using an SFP or XFP connector, make sure to keep the protective covering on.
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
73
5
74
Fiber optic connector cleaning
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
Chapter
Upgrading Software Images and Configuration Files
6
Software images
The images required to operate a NetIron CES or NetIron CER 2000 Series device are described in
Table 13.
TABLE 13
Software image files
Device
Image type
Image name
NetIron CES or NetIron CER
2000 Series
Monitor
ceb<xxxxx>
NOTE: <xxxxx> is a variable that refers to
release-specific information. Specific contents
of this field are determined by release and are
available in the relevant release notes.
Boot
ceb<xxxxx>
NOTE: <xxxxx> is a variable that refers to
release-specific information. Specific contents
of this field are determined by release and are
available in the relevant release notes.
Multi-Service IronWare
ce<xxxxx>
NOTE: <xxxxx> is a variable that refers to
release-specific information. Specific contents
of this field are determined by release and are
available in the relevant release notes.
Images and procedures required
The software images required and the procedures for upgrading have been changed as described
in the following sections:
• “Description of the software images required” – This sub-section describes each of the images
required to operate a NetIron CES and NetIron CER 2000 Series device.
• “Upgrade options” – This sub-section describes the procedures required for your software
upgrade depending upon the version you are upgrading from or to. Links are provided to the
required procedures as required.
• “Displaying flash memory and version information” – This sub-section describes the
commands that allow you to determine the contents of the NetIron CES and NetIron CER 2000
Series device’s flash memory and how to read the output of those commands.
• “Backing up the current software images” - This sub-section describes the software backup
procedure.
• “Virtual interface module” - This sub-section describes how to open an rconsole session with
the virtual interface module.
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
75
6
Software images
• “Upgrading the device’s monitor and boot images” – This sub-section describes the
procedures required for upgrading the NetIron CES and NetIron CER 2000 Series devices
Monitor and Boot software images. The procedures described apply to all versions of the
software.
• “Upgrading the device’s multi-service IronWare image” – This sub-section describes the
procedures required for upgrading the NetIron CES and NetIron CER 2000 Series devices
Multi-Service IronWare software image. The procedures described apply to all versions of the
software.
Description of the software images required
The functionality within each of the software images required to operate the NetIron CES and
NetIron CER 2000 Series is described in Table 14. Because the functions that are most likely to
change are contained within the Multi-Service IronWare image, updates will usually only require
updating the Multi-Service IronWare image.
TABLE 14
Description of software images
Software image
Functions in
versions 03.8.00 and later
Image name
Boot Image
Bootstrap
ceb<xxxx>
Monitor Image
Image Handling
ceb<xxxx>
Memory Init
Multi-Service IronWare Image
Application
ce<xxxx>
OS
NOTE
The NetIron CES and NetIron CER 2000 Series uses the same file image for both the boot and
monitor images.
Upgrade options
When performing this upgrade, you will usually only need to upgrade Multi-Service IronWare image.
The Boot and Monitor images will only need to be upgraded as specifically directed in the relevant
release notes.
The steps for this upgrade includes the following.
1. Determine the versions of the software images currently installed and running on the device.
2. Upgrade the device’s Multi-Service IronWare image.
Use the procedures described in “Upgrading the device’s multi-service IronWare image” on
page 81.
3. Reboot the NetIron CES and NetIron CER 2000 Series device.
In most cases, this is all that will be required. If you are directed by the release notes to upgrade
the Monitor or Boot images, use the following procedure.
76
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
Software images
6
1. Upgrade the NetIron CES and NetIron CER 2000 Series device’s Monitor and Boot images.
Use the procedures described in “Upgrading the device’s monitor and boot images” on
page 80.
2. Reboot the NetIron CES and NetIron CER 2000 Series device.
Displaying flash memory and version information
Prior to upgrading the images on a NetIron CES and NetIron CER 2000 Series device, it is advisable
to check the versions already installed. This allow you to determine which versions need to be
upgraded. It is also useful to check the versions installed immediately after an upgrade has been
done to make sure that you have installed the versions required in your installation. The following
sections describe how to use the show flash and show version commands to display this
information.
Displaying flash information
You can display information concerning the contents of a NetIron CES and NetIron CER 2000
Series device using the show flash command as shown in the following.
NetIron#show flash
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Code Flash - Type MT28F256J3, Size 64 MB
o IronWare Image (Primary)
Version 5.0.0T183, Size 11615139 bytes, Check Sum 6ad4
Compiled on Apr 14 2010 at 21:20:54 labeled as ce05000
o IronWare Image (Secondary)
Version 5.0.0T183, Size 11615139 bytes, Check Sum 6ad4
Compiled on Apr 14 2010 at 21:20:54 labeled as ce05000
o Monitor Image
Version 5.0.0T185, Size 443103 bytes, Check Sum 47a0
Compiled on Apr 14 2010 at 18:41:28 labeled as ceb05000
o Startup Configuration
Size 702 bytes, Check Sum fcc8
Modified on 14:02:34 GMT+00 Thu Apr 15 2010
Boot Flash - Type AM29LV040B, Size 512 KB
o Boot Image
Version 5.0.0T185, Size 443103 bytes, Check Sum 47a0
Compiled on Apr 14 2010 at 18:41:28 labeled as ceb05000
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
NetIron>
TABLE 15
This field...
Code flash and boot flash information
Displays...
NetIron CES and NetIron CER 2000 Series device
Code Flash
The model number and size of the NetIron CES and NetIron CER 2000 Series
device’s code flash.
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
77
6
Software images
TABLE 15
Code flash and boot flash information (Continued)
This field...
Displays...
Multi-Service IronWare
Image (Primary or
Secondary)
Indicates the Multi-Service IronWare image installed in the primary or secondary
location in the NetIron CES and NetIron CER 2000 Series device’s code flash. The
image must be ce<xxxxx>. The actual image name depends on the version of
software you have running on your device.
The output displays the following information about the image:
• Version – “5.0.00Txxy” indicates the image version number. The “Txxy” is used
by Brocade for record keeping. The “xx” indicates the hardware type, while the
“y” indicates the image type.
• Size – The size, in bytes, of the image.
• Check sum – A unique ID for the image. If the contents of the image change,
the check sum changes also.
• Compilation date and time – The date and time that Brocade compiled the
image.
Monitor Image
The image must be ceb<xxxxx>. The output displays the following information about
the image:
• Version – “5.0.00Txxy” indicates the image version number. The “Txxy” is used
by Brocade for record keeping. The “xx” indicates the hardware type, while the
“y” indicates the image type.
• Size – The size, in bytes, of the image.
• Check sum – A unique ID for the image. If the contents of the image change,
the check sum changes also.
• Compilation date and time – The date and time that Brocade compiled the
image.
Startup Configuration
78
The output displays the following information about the startup configuration:
Size – Size, in bytes, of the startup configuration.
Check sum – A unique ID for the file. If the contents of the file change, the
check sum changes also.
• Modification date and time – Date and time that the startup configuration was
last saved.
•
•
Boot Flash
The model number and size of the device’s boot flash.
Boot Image
The image must be ceb<xxxxx>. The output displays the following information about
the image:
• Version – “5.0.00Txxy” indicates the image version number. The “Txxy” is used
by Brocade for record keeping. The “xx” indicates the hardware type, while the
“y” indicates the image type.
• Size – The size, in bytes, of the image.
• Check sum – A unique ID for the image. If the contents of the image change,
the check sum changes also.
• Compilation date and time – The date and time that Brocade compiled the
image.
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
Software images
6
Displaying version information
You can display version information for a NetIron CES and NetIron CER 2000 Series device using
the show version command.
NetIron#show version
System: NetIron CER (Serial #: SA24090183, Part #: Not Exist)
License: L3_PREM (LID: ucHJFOFGNI)
Boot
: Version 5.0.0T185 Copyright (c) 1996-2009 Brocade Communications
Systems, Inc.
Compiled on Apr 14 2010 at 18:41:28 labeled as ceb05000
(443103 bytes) from boot flash
Monitor : Version 5.0.0T185 Copyright (c) 1996-2009 Brocade Communications
Systems, Inc.
Compiled on Apr 14 2010 at 18:41:28 labeled as ceb05000
(443103 bytes) from code flash
IronWare : Version 5.0.0T183 Copyright (c) 1996-2009 Brocade Communications
Systems, Inc.
Compiled on Apr 14 2010 at 21:20:54 labeled as ce05000
(11615139 bytes) from Primary
CPLD Version: 0x00000010
Micro-Controller Version: 0x0000000d
800 MHz Power PC processor 8544 (version 8021/0022) 400 MHz bus
512 KB Boot Flash (AM29LV040B), 64 MB Code Flash (MT28F256J3)
2048 MB DRAM
System uptime is 3 hours 12 minutes 25 seconds
Syntax: show version
The highlighted lines in the output indicate the versions currently running boot, monitor and
Multi-Service IronWare images for the NetIron CES and NetIron CER 2000 Series devices. The
fields are described in Table 15 except for the following.
The System: line indicates the hardware (NetIron CES or NetIron CER) and the type of software
package enabled on the unit. The type of software package enabled on the system can be one of
the following:
• BASE: Indicates that the BASE software package is enabled on the unit.
• ME_PREM: Indicates that the ME_PREM premium package is enabled on the unit.
• L3_PREM: Indicates that the L3_PREM premium package is enabled on the unit.
For a detailed description of the features available in each type of software package, please refer
to the NetIron Configuration Guide.
Backing up the current software images
Before performing a software upgrade, Brocade recommends backing up the following current
software images in the device’s flash memory.
Syntax: cp <original-file-name> <backup-file-name>
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
79
6
Software images
Virtual interface module
The NetIron CES and NetIron CER 2000 Series devices feature a virtual interface module. These
commands open an rconsole session with the virtual interface module in virtual slot 1, enter the
Privileged EXEC level of the interface module's CLI, and make a backup copy of the monitor file.
Entering the two exit commands returns you to the Privileged EXEC level of the NetIron CES and
NetIron CER 2000 Series device’s CLI.
NetIron#rconsole 1
Remote connection to LP slot 1 established
Press CTRL-X or type 'exit' to disconnect it
LP-1>en
No password has been assigned yet...
LP-1#
#
Syntax: rconsole <slot-number>
The <slot-number> parameter specifies the chassis slot number of the virtual interface module to
which you want to open an rconsole session. For the NetIron CES and NetIron CER 2000 Series
device, this should always be 1.
Syntax: enable
Syntax: exit
Syntax: Ctrl-X"
Upgrading the device’s monitor and boot images
If you are upgrading, you should only upgrade the monitor and boot images as described in the
relevant release notes.
Perform the following steps to upgrade a device’s monitor and boot images.
1. Place the new monitor and boot images on a TFTP server to which the device has access.
2. Copy the new monitor and boot images to the device. Enter one of the following commands at
the Privileged EXEC level of the device’s CLI (example: NetIron#).
TABLE 16
Command syntax for upgrading monitor and boot images
on the NetIron CES and NetIron CER 2000 Series device
Command syntax
Description
copy tftp flash <ip-addr> <image-name> monitor
Copies the latest monitor image from the TFTP server to
flash.
copy tftp flash <ip-addr> <image-name> boot
Copies the latest boot image from the TFTP server to
flash.
For information about the image name to specify, refer to Table 13.
3. Verify that the new monitor and boot images have been successfully copied to flash or slot 1 or
2 by entering one of the following commands at the Privileged EXEC level of the CLI:
• show flash
• dir /<path-name>/
80
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
Configuration files upload and download
6
Check for the boot image, monitor image, and the date and time at which the new images were
built.
4. If you want to upgrade other software images, go to the appropriate upgrade section for
information. If you have completed upgrading the software images, you must reboot the
NetIron CES and NetIron CER 2000 Series device to complete the upgrade process.
Upgrading the device’s multi-service IronWare image
Perform the following steps to upgrade the NetIron CES and NetIron CER 2000 Series device’s
Multi-Service IronWare image (primary or secondary).
1. Copy the new Multi-Service IronWare image from the TFTP server to the code flash. To perform
this step, enter one of the following commands at the Privileged EXEC level of the CLI:
• copy tftp flash <ip-addr> <image-name> primary | secondary
For information about the image name to specify, refer to Table 13.
2. Verify that the new Multi-Service IronWare image has been successfully copied to the specified
destination by entering one of the following commands at the Privileged EXEC level of the CLI:
• show flash (if the destination was code flash)
• dir /<path-name>/
Check for the primary or secondary image and the date and time that it was placed in the
directory.
3. If you want to upgrade other software images, go to the appropriate upgrade section for
information. If you have completed upgrading the software images, you must reboot the device
to complete the upgrade process.
Configuration files upload and download
For easy configuration management, the device supports both the download and upload of
configuration files between the device and a TFTP server on the network.
You can upload either the startup configuration file or the running configuration to the TFTP server,
or code flash and use in booting the system:
• Startup configuration file – This file (startup-config) contains the configuration information
that is currently saved in the NetIron CES and NetIron CER 2000 Series device’s code flash. To
display this file, enter the show configuration command at any CLI prompt.
• Running configuration – This active configuration is in the system RAM but not yet saved to
code flash. These changes could represent a short-term requirement or general configuration
change. To display this configuration, enter the show running-config or write terminal
command at any CLI prompt.
Each device can have one startup configuration file and one running configuration. The startup
configuration file is shared by both flash modules. The running configuration resides in DRAM.
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
81
6
Configuration files upload and download
Replacing the startup configuration with the running configuration
After you make configuration changes to the active system, you can save those changes by writing
them to code flash. When you write configuration changes to code flash, you replace the startup
configuration with the running configuration.
To replace the startup configuration with the running configuration, enter the following command
at any Enable or CONFIG command prompt.
NetIron# write memory
Replacing the running configuration with the startup configuration
If you have not yet executed a write memory command to overwrite the startup configuration with
the running configuration and you want to back out of the changes you have made to the running
configuration and return to the startup configuration, complete the following steps.
1. Enter the following command at the Privileged EXEC level of the CLI.
NetIron# reload
When the system detects differences between the running and startup configurations, it
prompts you as follows.
Running Config data has been changed.
Do you want to continue
the reload without saving the running config? (enter 'y' or 'n'):
2. Enter y and press the Enter key
Copying a configuration file to or from a TFTP server
To copy the startup-config or running-config file to or from a TFTP server, use one of the following
methods. The commands must be entered at the Privileged EXEC level of the CLI.
NOTE
You can name the configuration file when you copy it to a TFTP server. However, when you copy
a configuration file from the server to a NetIron CES and NetIron CER 2000 Series device, the
file is always copied as “startup-config” or “running-config”, depending on which type of file
you saved to the server.
• copy startup-config tftp <tftp-ip-addr> <filename> – Use this command to upload a copy of
startup-config from the NetIron CES and NetIron CER 2000 Series device to a TFTP server.
• copy running-config tftp <tftp-ip-addr> <filename> – Use this command to upload a copy of
the running configuration from the NetIron CES and NetIron CER 2000 Series device to a TFTP
server.
• copy tftp startup-config <tftp-ip-addr> <filename> – Use this command to download a copy of
the startup-config from a TFTP server to a device.
• copy tftp running-config <tftp-ip-addr> <filename> [overwrite] – Use this command to
download the running configuration from the system’s runtime memory to a TFTP server. The
running configuration is then appended to the current configuration of a NetIron CES and
NetIron CER 2000 Series device.
82
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
Dynamic configuration loading
6
Making local copies of the startup configuration file
You can copy the startup-config file in code flash to a TFTP server or to a PCMCIA flash card
inserted in a NetIron CES and NetIron CER 2000 Series device’s slot 1.
For example, to make a backup copy of the startup-config file and save the backup file to a TFTP
server, enter a command such as the following at the Privileged EXEC level in the CLI.
NetIron# copy startup-config tftp 10.28.40.21 startup-config.bak
Syntax: copy startup-config tftp <ip-address> <dest-file-name>
The <ip-address> variable specifies the IP address of the TFTP server that you want to save the
startup configuration to.
The <dest-file-name> specifies the name of the file you copied to a new destination.
Dynamic configuration loading
You can load dynamic configuration commands (commands that do not require a reload to take
effect) from a file on a TFTP server into the device’s running-config. You can make configuration
changes off-line, then load the changes directly into the device’s running-config, without reloading
the software.
Usage considerations
Consider the following:
• Use this feature only to load configuration information that does not require a software reload
to take effect. For example, you cannot use this feature to change statically configured memory
(system-max command).
• Do not load port configuration information for secondary ports in a trunk group. Since all ports
in a trunk group use the port configuration settings of the primary port in the group, the
software cannot implement the changes to the secondary port.
Preparing the configuration file
A configuration file that you create must follow the same syntax rules as the startup-config file the
device creates.
Consider the following while preparing the configuration file:
• The configuration file is a script containing CLI configuration commands. The CLI reacts to
each command entered from the file in the same way the CLI reacts to the command if you
enter it. For example, if the command results in an error message or a change to the CLI
configuration level, the software responds by displaying the message or changing the CLI level.
• The software retains the running-config that is currently on the device, and changes the
running-config only by adding new commands from the configuration file. If the running config
already contains a command that is also in the configuration file you are loading, the CLI
rejects the new command as a duplicate and displays an error message. For example, if the
running-config already contains a command that configures ACL 1, the software rejects ACL 1
in the configuration file, and displays a message that ACL 1 is already configured.
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
83
6
Dynamic configuration loading
• The file can contain global CONFIG commands or configuration commands for interfaces,
routing protocols, and so on. You cannot enter User EXEC or Privileged EXEC commands.
• The default CLI configuration level in a configuration file is the global CONFIG level. Thus, the
first command in the file must be a global CONFIG command or !. The ! (exclamation point)
character means “return to the global CONFIG level”.
NOTE
You can enter text following ! as a comment. However, the ! is not a comment marker. It returns
the CLI to the global configuration level.
NOTE
The CLI changes to the global CONFIG level if you load the configuration as a startup-config file
instead of the running-config (using the copy tftp startup-config <ip-addr> <filename>
command or ncopy tftp <ip-addr> <from-name> startup-config command).
NOTE
If you copy-and-paste a configuration into a management session, the CLI ignores the ! instead
of changing the CLI to the global CONFIG level. As a result, you might get different results if you
copy-and-paste a configuration instead of loading the configuration using TFTP.
Make sure you enter each command at the correct CLI level. Since some commands have
identical forms at both the global CONFIG level and individual configuration levels, if the
response to the configuration file results in the CLI entering a configuration level you did not
intend, then you can get unexpected results.
For example, if a trunk group is active on the device, and the configuration file contains a
command to disable STP on one of the secondary ports in the trunk group, the CLI rejects the
commands to enter the interface configuration level for the port and moves on to the next
command in the file you are loading. If the next command is a spanning-tree command whose
syntax is valid at the global CONFIG level as well as the interface configuration level, then the
software applies the command globally. Here is an example.
The configuration file contains these commands.
interface ethernet1/2
no spanning-tree
The CLI responds like this.
NetIron(config)# interface ethernet 1/2
Error - cannot configure secondary ports of a trunk
NetIron(config)# no spanning-tree
NetIron(config)#
• If the file contains commands that must be entered in a specific order, the commands must
appear in the file in the required order. For example, if you want to use the file to replace an IP
address on an interface, you must first remove the old address using “no” in front of the ip
address command, then add the new address. Otherwise, the CLI displays an error message
and does not implement the command. Here is an example.
The configuration file contains these commands.
interface ethernet 1/1
ip address 10.10.10.1/24
The running-config already has a command to add an address to 1/1, so the CLI responds like
this.
84
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
Save and load configuration information using SNMP
6
NetIron(config)# interface ethernet 1/1
NetIron(config-if-e1000-1/1)# ip add 10.10.10.69/24
Error: can only assign one primary ip address per subnet
NetIron(config-if-e1000-1/1)#
To successfully replace the address, enter commands into the file as follows.
interface ethernet 1/1
no ip address 10.10.10.1/24
ip address 10.10.10.69/24
This time, the CLI accepts the command, and no error message is displayed.
NetIron(config)# interface ethernet 3/1
NetIron(config-if-e1000-1/1)# no ip add 10.10.10.1/24
NetIron(config-if-e1000-1/1)# ip add 10.10.10.69/24
NetIron-if-e1000-1/1)
• Always use the end command at the end of the file. The end command must appear on the last
line of the file, by itself.
Loading the configuration information into the running-config
You can load the configuration information from a TFTP server. To load the file from a TFTP server,
use either of the following commands:
• copy tftp running-config <ip-addr> <filename> [overwrite]
• ncopy tftp <ip-addr> <filename> running-config
Save and load configuration information using SNMP
You can use an SNMP management application such as Brocade's IronView Network Manager or
any third-party SNMP management application to save and load a NetIron CES and NetIron CER
2000 Series device’s configuration. To save and load configuration information using such an
SNMP management application, use the following procedure.
Uploading and downloading configuration information using SNMP
1. Enable the SNMP agent on the device using the following command from the global CONFIG
level of the CLI.
snmp-server
2. On the device, enter the following command from the global CONFIG level of the CLI.
no snmp-server pw-check
This command disables password checking for SNMP set requests. If a third-party SNMP
management application does not add a password to the password field when it sends SNMP
set requests to a Brocade device, by default the Brocade device rejects the request.
3. From a management station, send the following SNMP PDU to the agent.
SnmpSet (1.3.6.1.4.1.1191.1.1.2.1.5.0 = <TFTP IP address>
1.3.6.1.4.1.1991.1.1.2.1.8.0 = <config-file-name>
1.3.6.1.4.1.1991.1.1.2.1.9.0 = <command-integer>
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
85
6
Image and configuration files erasure
where:
<tftp-ip-addr> is the TFTP server’s IP address.
<config-file-name> is the configuration file name.
<command-integer> is one of the following:
20 – Upload the startup-config file from the Brocade device’s code flash to the TFTP server.
21 – Download a startup-config file from a TFTP server to the Brocade device’s code flash.
22 – Upload the running-config from the Brocade device’s code flash to the TFTP server.
23 – Download a configuration file from a TFTP server into the Brocade device’s
running-config.
30 – Download the config to DRAM from a TFTP server, clear the running-running config,
and overwrite with the new config.
NOTE
Command option 23 adds configuration information to the running-config on the device, and
does not replace commands. If you want to replace configuration information in the device,
use “no” forms of the configuration commands to remove the configuration information, then
use configuration commands to create the configuration information you want. Command
option 30 erases the entire running-config and replaces it with the new configuration file.
Image and configuration files erasure
To erase software images or configuration files, enter one of the following commands at the
Privileged EXEC level in the CLI:
• erase flash primary erases the image stored in primary flash of the system.
• erase flash secondary erases the image stored in secondary flash of the system.
• erase startup-config erases the configuration stored in the startup configuration file; however,
the running configuration remains intact until system reboot.
System reload sceduling
In addition to reloading the device manually, you can configure the system to reload itself at a
specific time or after a specific amount of time has passed.
NOTE
The scheduled reload feature requires the system clock. You can use a Simple Network Time
Protocol (SNTP) server to set the clock or you can set the device clock manually.
86
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
Diagnostic error codes and remedies for TFTP transfers
6
Reloading at a specific time
To schedule a system reload for a specific time, use one of the following methods.
To schedule a system reload from the primary flash module for 6:00:00 AM, January 19, 2006,
enter the following command at the Privileged EXEC level of the CLI.
NetIron# reload at 06:00:00 01-19-06
Syntax: reload at <hh:mm:ss> <mm-dd-yy> [primary | secondary]
<hh:mm:ss> is the hours, minutes, and seconds.
<mm-dd-yy> is the month, day, and year.
primary | secondary specifies whether the reload is to occur from the primary code flash module or
the secondary code flash module. The default is primary.
Reloading after a specific amount of time
To schedule a system reload to occur after a specific amount of time has passed on the system
clock, use one of the following methods.
To schedule a system reload from the secondary flash one day and 12 hours later, enter the
following command at the Privileged EXEC level of the CLI.
NetIron# reload after 01:12:00 secondary
Syntax: reload after <dd:hh:mm> [primary | secondary]
<dd:hh:mm> is the number of days, hours, and minutes.
primary | secondary specifies whether the reload is to occur from the primary code flash image or
the secondary code flash image.
Diagnostic error codes and remedies for TFTP transfers
If an error occurs with a TFTP transfer to or from a NetIron CES and NetIron CER 2000 Series
device, one of the error codes shown in Table 17 is displayed.
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
87
6
PREMIUM package upgrade
TABLE 17
.Error codes, messages, and remedies
Error code
Message
Explanation and action
1
Flash read preparation failed.
2
Flash read failed.
A flash error occurred during the download.
Retry the download. If it fails again, contact customer
support
3
Flash write preparation failed.
4
Flash write failed.
5
TFTP session timeout.
TFTP failed because of a time out.
Check IP connectivity and make sure the TFTP server is
running.
6
TFTP out of buffer space.
The file is larger than the amount of space on the device
or TFTP server.
If you are copying an image file to flash, first copy the
other image to your TFTP server, then delete it from flash.
(Use the erase flash... CLI command at the Privileged
EXEC level to erase the image in the flash.)
If you are copying a configuration file to flash, edit the file
to remove unneeded information, then try again.
7
TFTP busy, only one TFTP session can be
active.
Another TFTP transfer is active on another CLI session or
SNMP.
Wait, then retry the transfer.
8
File type check failed.
You accidentally attempted to copy the incorrect image
code into the system.Retry the transfer using the correct
image.
16
TFTP remote - general error.
17
TFTP remote - no such file.
The TFTP configuration has an error. The specific error
message describes the error.
Correct the error, then retry the transfer.
18
TFTP remote - access violation.
19
TFTP remote - disk full.
20
TFTP remote - illegal operation.
21
TFTP remote - unknown transfer ID.
22
TFTP remote - file already exists.
23
TFTP remote - no such user.
PREMIUM package upgrade
This section describes how to upgrade your NetIron CES and NetIron CER 2000 Series device to a
different PREMIUM software package.
If you have any questions about performing this upgrade, please refer to “Getting technical help or
reporting errors” on page xii for contact telephone numbers. You also can send email to
support@foundrynet.com.
88
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
PREMIUM package upgrade
TABLE 18
6
NetIron CES and NetIron CER 2000 Series upgrade part numbers
Upgrade Prom
Description
NI-CES2024-MEU
Metro Edge Premium upgrade for NetIron CES 2000 Series 24-port models
NI-CES2024-L3U
L3 Premium upgrade for NetIron CES 2000 Series 24-port models
NI-CES2048-MEU
Metro Edge Premium upgrade for NetIron CES 2000 Series 48-port models
NI-CES2048-L3U
L3 Premium upgrade for NetIron CES 2000 Series 48-port models
NI-CER-2024-ADVU
Advanced Services Premium License for NetIron CER 24-port models.
NI-CER-2048-ADVU
Advanced Services Premium License for NetIron CER 48-port models.
Upgrade kit contents
Before beginning the upgrade, please verify the package contents. If any items are missing from
the kit, contact your place of purchase. The upgrade kit contains the following:
• Electrostatic Discharge (ESD) protection kit
• Upgrade instructions
• Dual Inline Package (DIP) key (also called a PROM) that has eight pins. You should have one of
the part numbers listed in Table 18.
CAUTION
Do not use an electric screwdriver when upgrading the device to a premium package.
You need a #1 Phillips-head screwdriver and an ESD wrist strap to perform this procedure. You also
need a static-free work area.
Hardware installation
You need a Phillips-head screwdriver and an ESD wrist strap to perform this procedure. You also
need a static-free work area.
Follow the steps below to perform the upgrade.
DANGER
Disconnect the power cord from all power sources to completely remove power from the device.
1. Remove the power cables from the device.
2. If the device is mounted in an equipment rack, remove the device from the rack and place the
device in a static-free work area.
3. Put on the supplied ESD wrist strap and attach the clip end to a metal surface (such as an
equipment rack) to act as ground.
4. Remove the top cover from the device.
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
89
6
PREMIUM package upgrade
FIGURE 41
Top cover removal on NetIron CES and NetIron CER 2000 Series devices
The circular or semicircular indentation on the Dual Inline Package (DIP) key indicates the
position of lead pin 1. See Figure 42. If the DIP key has a circular indentation, it is aligned with
pin 1. The semicircular indentation on the DIP key is located on the same end as pin 1
FIGURE 42
1
Dip key setting
2
1
pin 1
2
semicircular indentation
Align the semicircular indentation on the DIP key with the semicircular cut-out on the DIP
socket. Refer to the appropriate illustration Figure 43 and Figure 44.
CAUTION
Make sure you insert the DIP key so that lead pin 1 goes into the correct hole as shown in the
appropriate illustration. If you accidentally insert the DIP key backwards, the device will not work
and may be damaged when you power it on.
90
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
PREMIUM package upgrade
6
CAUTION
Do not push too hard. If the DIP key does not readily go into the DIP socket, stop pushing and
verify that the lead pins are straightened and properly aligned over the holes, straighten any lead
pins that need straightening, then try again.
5. Insert the DIP key provided in this upgrade kit into the DIP socket on the motherboard.
FIGURE 43
DIP key insertion for NetIron CES 2024
4
3
1
2
1
EEPROM
2
socket
3
pin 1
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
91
6
PREMIUM package upgrade
FIGURE 44
DIP key insertion for NetIron CES 2048
.
3
3
A
B
1
1
2
2
A
CES/CER 2048F and 2048FX
B
CES/CER 2048C and 2048CX
1
EEPROM
1
EEPROM
2
socket
2
socket
3
pin 1
3
pin 1
NOTE
On the NetIron CES and CER 2048 models the locations for the DIP key sockets are different for the
copper (-C and -CX) variants and the fiber-optic (-F and -FX) variants.
6. Replace the cover as follows:
• Hold the cover on each side at the center and align the front of the cover with the end of
the serial interface on the front panel, so that the cover extends slightly past the front
panel of the chassis.
• Slide the cover backwards until it is fully flush with the top of the chassis and slides into
place.
• Re-insert the cover screws.
7.
If applicable, re-attach the rack mounting ears.
8. Reinstall the device in its equipment rack, if applicable.
9. Re-insert the power cables to power on the device.
There is no change required in the software image after upgrading the premium package, in order
to utilize the capabilities enabled by the premium software package.
92
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
Appendix
Regulatory Statements
A
U.S.A.
This equipment has been tested and found to comply with the limits for a Class A digital device
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
CAUTION
Changes or modifications made to this device which are not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
Industry Canada statement
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
Europe and Australia
This is a Class A product. In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.
Germany
Machine noise information regulation - 3. GPSGV, the highest sound pressure level value is 60.0
dB(A) in accordance with EN ISO 7779.
Maschinenlärminformations-Verordnung - 3. GPSGV, der höchste Schalldruckpegel beträgt 60.0
dB(A) gemäss EN ISO 7779.
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
93
A
Japan
Japan
The following statements apply to the NetIron CES and NetIron CER 2000 Series devices.
English translation of above statement
This is Class A product based on the standard of the Voluntary Control Council For Interference by
Information Technology Equipment (VCCI). If this equipment is used in a domestic environment,
radio disturbance may arise. When such trouble occurs, the user may be required to take corrective
actions.
Japan Denan power cord statement
English translation of above statement
ATTENTION: Never use the power cord packed with your equipment for other products.
94
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
Power cords (Japan Denan)
A
Power cords (Japan Denan)
English translation of above statement
ATTENTION: Never use the power cord packed with your equipment for other products.
Korea
The following statement applies to the NetIron CES and NetIron CER 2000 Series devices.
English translation of above statement
This apparatus has radio wave acceptability registration as a Class A device, so sellers or users
should be aware of this. If it is sold or purchased incorrectly, it should be exchanged with a home
apparatus (Class B).
China
The following statement applies to the NetIron CES and NetIron CER 2000 Series devices.
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
95
A
Russia
English translation of above statement
This is a class A product. In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures
Russia
The following statement applies to the NetIron CES and NetIron CER 2000 Series devices.
"C " -2--0560,
: 29 2009 . 29 2012 .
English translation of above statement
Certificate of Conformity in "Certification System in the field of telecommunications" #
ОС-2-СПД-0560, validity from the 29 of October 2009 to the 29 of October 2012.
96
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
Appendix
Caution and Danger Notices
B
The caution and danger notices that appear in this manual are listed below in English, German,
French, and Spanish.
Cautions
A caution calls your attention to a possible hazard that can damage equipment.
“Vorsicht” weist auf die Gefahr einer möglichen Beschädigung des Gerätes in.
Une mise en garde attire votre attention sur un risque possible d'endommagement de
l'équipement. Ci-dessous, vous trouverez les mises en garde utilisées dans ce manuel.
Un mensaje de precaución le advierte sobre un posible peligro que pueda dañar el equipo. Las
siguientes son precauciones utilizadas en este manual.
CAUTION
Remove the power cord from a power supply before you install it in or remove it from the
device. Otherwise, the power supply or the device could be damaged as a result. (The
device can be running while a power supply is being installed or removed, but the power
supply itself should not be connected to a power source.)
VORSICHT
Nehmen Sie vor dem Anschließen oder Abtrennen des Geräts das Stromkabel vom
Netzteil ab. Ansonsten könnten das Netzteil oder das Gerät beschädigt werden. (Das
Gerät kann während des Anschließens oder Annehmens des Netzteils laufen. Nur das
Netzteil sollte nicht an eine Stromquelle angeschlossen sein.)
MISE EN GARDE
Enlevez le cordon d'alimentation d'un bloc d'alimentation avant de l'installer ou de
l'enlever du dispositif. Sinon, le bloc d'alimentation ou le dispositif risque d'être
endommagé. (Le dispositif peut être en train de fonctionner lorsque vous installez ou
enlevez un bloc d'alimentation, mais le bloc d'alimentation lui-même ne doit pas être
connecté à une source d'alimentation.)
PRECAUCIÓN
Retire el cordón de corriente del suministro de corriente antes de instalarlo o retírarlo del
instrumento. De no hacerse así, el suministro de corriente o el instrumento podrían
resultar dañados. (El instrumento puede estar encendido mientras se instala o retira un
suministro de corriente, pero el suministro de corriente en sí no deberá conectado a la
corriente).
CAUTION
Do not install the device in an environment where the operating ambient temperature
might exceed 40° C (104° F).
VORSICHT
Das Gerät darf nicht in einer Umgebung mit einer Umgebungsbetriebstemperatur von über
40° C (104° F) installiert werden.
MISE EN GARDE
N'installez pas le dispositif dans un environnement où la température d'exploitation
ambiante risque de dépasser 40° C (104° F).
PRECAUCIÓN
No instale el instrumento en un entorno en el que la temperatura ambiente de operación
pueda exceder los 40°C (104°F).
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
97
B
98
Cautions
CAUTION
Make sure the air flow around the front, sides, and back of the device is not restricted.
VORSICHT
Stellen Sie sicher, dass an der Vorderseite, den Seiten und an der Rückseite der Luftstrom
nicht behindert wird.
MISE EN GARDE
Vérifiez que rien ne restreint la circulation d'air devant, derrière et sur les côtés du
dispositif et qu'elle peut se faire librement.
PRECAUCIÓN
Asegúrese de que el flujo de aire en las inmediaciones de las partes anterior, laterales y
posterior del instrumento no esté restringido.
CAUTION
Use a separate branch circuit for each AC power cord, which provides redundancy in case
one of the circuits fails.
VORSICHT
Es empfiehlt sich die Installation eines separaten Stromkreiszweiges für jede
Wechselstrom-Elektroschnur als Redundanz im Fall des Ausfalls eines Stromkreises.
MISE EN GARDE
Utilisez un circuit de dérivation différent pour chaque cordon d’alimentation C.A. Ainsi, il y
aura un circuit redondant en cas de panne d’un des circuits.
PRECAUCIÓN
Use un circuito derivado separado para cada cordón de alimentación de CA, con lo que se
proporcionará redundancia en caso de que uno de los circuitos falle.
CAUTION
Ensure that the device does not overload the power circuits, wiring, and over-current
protection. To determine the possibility of overloading the supply circuits, add the ampere
(amp) ratings of all devices installed on the same circuit as the device. Compare this total
with the rating limit for the circuit. The maximum ampere ratings are usually printed on the
devices near the input power connectors.
VORSICHT
Stromkreise, Verdrahtung und Überlastschutz dürfen nicht durch das Gerät überbelastet
werden. Addieren Sie die Nennstromleistung (in Ampere) aller Geräte, die am selben
Stromkreis wie das Gerät installiert sind. Somit können Sie feststellen, ob die Gefahr einer
Überbelastung der Versorgungsstromkreise vorliegt. Vergleichen Sie diese Summe mit der
Nennstromgrenze des Stromkreises. Die Höchstnennströme (in Ampere) stehen
normalerweise auf der Geräterückseite neben den Eingangsstromanschlüssen.
MISE EN GARDE
Assurez-vous que le dispositif ne risque pas de surcharger les circuits d'alimentation, le
câblage et la protection de surintensité. Pour déterminer le risque de surcharge des circuits
d'alimentation, additionnez l'intensité nominale (ampères) de tous les dispositifs installés
sur le même circuit que le dispositif en question. Comparez alors ce total avec la limite de
charge du circuit. L'intensité nominale maximum en ampères est généralement imprimée
sur chaque dispositif près des connecteurs d'entrée d'alimentation.
PRECAUCIÓN
Verifique que el instrumento no sobrecargue los circuitos de corriente, el cableado y la
protección para sobrecargas. Para determinar la posibilidad de sobrecarga en los circuitos
de suministros, añada las capacidades nominales de corriente (amp) de todos los
instrumentos instalados en el mismo circuito que el instrumento. Compare esta suma con el
límite nominal para el circuito. Las capacidades nominales de corriente máximas están
generalmente impresas en los instrumentos, cerca de los conectores de corriente de
entrada.
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
Cautions
B
CAUTION
Make sure you insert the power supply right-side up. It is possible to insert the supply upside
down, although the supply will not engage with the power backplane when upside down. The
power supply is right-side up when the power connector is on the left and the fan vent is on
the right.
VORSICHT
Sicher Sie sicher, dass Sie das Netzteil mit der richtigen Seite nach oben weisend
einstecken. Man kann die Karte auch umgekehrt einstecken. Allerdings rastet das
umgekehrte Netzteil nicht in die Netzstrom-Rückwandplatine ein. Die rechte Seite des
Netzteils weist nach oben, wenn sich der Stromanschlussstecker links und der
Ventilatorschlitz rechts befindet.
MISE EN GARDE
Assurez-vous d'insérer le bloc d'alimentation dans le bon sens. Il est possible de l'insérer " la
tête en bas ", mais le bloc d'alimentation ne s'enclenchera pas dans la face arrière
d'alimentation s'il est inséré à l'envers. Le bloc d'alimentation est dans le bon sens lorsque
le connecteur se trouve sur le côté gauche et le ventilateur sur la droite.
PRECAUCIÓN
Verifique que inserta el suministro de corriente con la cara correcta hacia arriba. Es posible
insertar el suministro hacia abajo, pese a que este no se conectará con el enchufe posterior
de esta forma. El suministro de potencia estará con la cara correcta hacia arriba cuando el
conector de corriente quede a la izquierda y la abertura del ventilador queda a la derecha.
CAUTION
For the DC input circuit, (DC power supply part number RPS9-DC), make sure there is a
20-amp circuit breaker, minimum -48VDC, double pole, on the input to the terminal block.
The input wiring for connection to the product should be Listed copper wire, 12 AWG,
marked VW-1, and rated 90 degrees Celsius.
VORSICHT
Für den Eingangs-Gleichstromkreis (Gleichstromnetzteile mit der Teilenr. RPS9-DC) muss
gewährleistet warden, dass ein 20 A-Leistungsschalter (min. -48VDC) am Eingang zur
Reihenklemme installiert wird. Beim Eingangsdraht für den Anschluss am Produkt muss es
sich um einen zulässigen Kupferdraht (12 AWG gekennzeichnet mit VW-1), der für
mindestens 90° C ausgelegt ist, handeln.
MISE EN GARDE
Pour le circuit d’alimentation C.C.(références du bloc d’alimentation C.C. RPS9-DC),
assurez-vous de la présence d’un 20 ampères, minimum –48 V C.C., double coupure, sur
l’entrée vers le bloc d’alimentation. Les câbles d’alimentation pour le produit doivent être
en fils de cuivre, 12 AWG (American Wire Gauge), marqués VW-1 et classés 90 degrés
Celsius.
PRECAUCIÓN
Para el circuito de entrada de CC (suministro de corriente continua con No. de referencia
RPS9-DC), verifique que haya un cortacircuitos para 20 amperios, mínimo de –48 VCC,
bipolar, en la entrada al bloque terminal. El cableado de entrada para la conexión al
producto deberá ser catalogado de cobre, 12 AWG, marcado VW-1, y nominal para 90
grados Celsius.
CAUTION
Never leave tools inside the chassis.
VORSICHT
Lassen Sie keine Werkzeuge im Chassis zurück.
MISE EN GARDE
Ne laissez jamais d'outils à l'intérieur du châssis.
PRECAUCIÓN
No deje nunca herramientas en el interior del chasis.
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
99
B
100
Cautions
CAUTION
Use the erase startup-config command only for new systems. If you enter this command on
a system you have already configured, the command erases the configuration. If you
accidentally do erase the configuration on a configured system, enter the write memory
command to save the running configuration to the startup-config file.
VORSICHT
Verwenden Sie den Befehl "Erase startup-config" (Löschen Startup-Konfig) nur für neue
Systeme. Wenn Sie diesen Befehl in ein bereits konfiguriertes System eingeben, löscht der
Befehl die Konfiguration. Falls Sie aus Versehen die Konfiguration eines bereits
konfigurierten Systems löschen, geben Sie den Befehl "Write Memory" (Speicher schreiben)
ein, um die laufende Konfiguration in der Startup-Konfig-Datei zu speichern.
MISE EN GARDE
N'utilisez la commande erase startup-config que pour les nouveaux systèmes. Si vous
entrez cette commande sur un système que vous avez déjà configuré, elle efface la
configuration. Si vous effacez la configuration par accident sur un système configuré, entrez
la commande write memory pour enregistrer la configuration actuelle dans le fichier
startup-config.
PRECAUCIÓN
Use el comando erase startup-config (borrar configuración de inicio) para sistemas nuevos
solamente. Si usted introduce este comando en un sistema que ya ha configurado, el
comando borrará la configuración. Si usted borra accidentalmente la configuración en un
sistema ya configurado, introduzca el comando write memory (escribir memoria) para
guardar la configuración en ejecución en el archivo startup-config.
CAUTION
If you do not install a module in a slot, you must keep the slot panel in place. If you run the
chassis with an uncovered slot, the system will overheat.
VORSICHT
Falls kein Modul im Steckplatz installiert wird, muss die Steckplatztafel angebracht werden.
Wenn ein Steckplatz nicht abgedeckt wird, läuft das System heiß.
MISE EN GARDE
Si vous n’installez pas de module dans un slot, vous devez laisser le panneau du slot en
place. Si vous faites fonctionner le châssis avec un slot découvert, le système surchauffera.
PRECAUCIÓN
Si no instala un módulo en la ranura, deberá mantener el panel de ranuras en su lugar. Si
pone en funcionamiento el chasis con una ranura descubierta, el sistema sufrirá
sobrecalentamiento.
CAUTION
Changes or modifications made to this device that are not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
VORSICHT
Falls dieses Gerät verändert oder modifiziert wird, ohne die ausdrückliche Genehmigung
der für die Einhaltung der Anforderungen verantwortlichen Partei einzuholen, kann dem
Benutzer der weitere Betrieb des Gerätes untersagt werden.
MISE EN GARDE
Les éventuelles modifications apportées à cet équipement sans avoir été expressément
approuvées par la partie responsable d'en évaluer la conformité sont susceptibles
d'annuler le droit de l'utilisateur à utiliser cet équipement.
PRECAUCIÓN
Si se realizan cambios o modificaciones en este dispositivo sin la autorización expresa de la
parte responsable del cumplimiento de las normas, la licencia del usuario para operar este
equipo puede quedar anulada.
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
Danger
B
CAUTION
Changes or modifications made to this device that are not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
VORSICHT
Falls dieses Gerät verändert oder modifiziert wird, ohne die ausdrückliche Genehmigung
der für die Einhaltung der Anforderungen verantwortlichen Partei einzuholen, kann dem
Benutzer der weitere Betrieb des Gerätes untersagt werden.
MISE EN GARDE
Les éventuelles modifications apportées à cet équipement sans avoir été expressément
approuvées par la partie responsable d'en évaluer la conformité sont susceptibles
d'annuler le droit de l'utilisateur à utiliser cet équipement.
PRECAUCIÓN
Si se realizan cambios o modificaciones en este dispositivo sin la autorización expresa de
la parte responsable del cumplimiento de las normas, la licencia del usuario para operar
este equipo puede quedar anulada.
Danger
A danger calls your attention to a possible hazard that can cause injury or death. The following are
the danger notices used in this manual.
"Gefahr" weist auf eine mögliche Gefährdung hin, die zu Verletzungen oder Tod führen können. Sie
finden die folgenden Warnhinweise in diesem Handbuch.
Un danger attire votre attention sur un risque possible de blessure ou de décès. Ci-dessous, vous
trouverez les dangers utilisés dans ce manuel.
Una advertencia le llama la atención sobre cualquier peligro posible que pueda ocasionar daños
personales o la muerte. A continuación se dan las advertencias utilizadas en este manual.
WARNING
The procedures in this manual are for qualified service personnel.
GEFAHR
Die Verfahren in diesem Handbuch sind nur für qualifiziertes Wartungspersonal gedacht.
DANGER
Les procédures décrites dans ce manuel doivent être effectuées par le personnel de
service qualifié uniquement.
PELIGRO
Los procedimientos de este manual se han hecho para personal de servicio cualificado.
WARNING
All fiber optic interfaces use Class 1 lasers.
GEFAHR
Alle Glasfaser-Schnittstellen verwenden Laser der Klasse 1.
DANGER
Toutes les interfaces en fibres optiques utilisent des lasers de classe 1.
PELIGRO
Todas las interfaces de fibra óptica utilizan láser de clase 1.
WARNING
Make sure the rack or cabinet housing the device is adequately secured to prevent it from
becoming unstable or falling over.
GEFAHR
Stellen Sie sicher, dass das Gestell oder der Schrank für die Unterbringung des Geräts auf
angemessene Weise gesichert ist, so dass das Gestell oder der Schrank nicht wackeln oder
umfallen kann.
DANGER
Vérifiez que le bâti ou le support abritant le dispositif est bien fixé afin qu'il ne devienne pas
instable ou qu'il ne risque pas de tomber.
PELIGRO
Verifique que el bastidor o armario que alberga el instrumento está asegurado
correctamente para evitar que pueda hacerse inestable o que caiga.
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
101
B
102
Danger
WARNING
Mount the devices you install in a rack or cabinet as low as possible. Place the heaviest
device at the bottom and progressively place lighter devices above.
GEFAHR
Montieren Sie die Geräte im Gestell oder Schrank so tief wie möglich. Platzieren Sie das
schwerste Gerät ganz unten, während leichtere Geräte je nach Gewicht (je schwerer desto
tiefer) darüber untergebracht werden.
DANGER
Montez les dispositifs que vous installez dans un bâti ou support aussi bas que possible.
Placez le dispositif le plus lourd en bas et le plus léger en haut, en plaçant tous les
dispositifs progressivement de bas en haut du plus lourd au plus léger.
PELIGRO
Monte los instrumentos que instale en un bastidor o armario lo más bajos posible. Ponga
el instrumento más pesado en la parte inferior y los instrumentos progresivamente más
livianos más arriba.
WARNING
Disconnect the power cord from all power sources to completely remove power from the
device.
GEFAHR
Ziehen Sie das Stromkabel aus allen Stromquellen, um sicherzustellen, dass dem Gerät
kein Strom zugeführt wird.
DANGER
Débranchez le cordon d'alimentation de toutes les sources d'alimentation pour couper
complètement l'alimentation du dispositif.
PELIGRO
Para desconectar completamente la corriente del instrumento, desconecte el cordón de
corriente de todas las fuentes de corriente.
WARNING
Make sure that the power source circuits are properly grounded, then use the power cord
supplied with the device to connect it to the power source.
GEFAHR
Stellen Sie sicher, dass die Stromkreise ordnungsgemäß geerdet sind. Benutzen Sie dann
das mit dem Gerät gelieferte Stromkabel, um es an die Srromquelle anzuschließen.
DANGER
Vérifiez que les circuits de sources d'alimentation sont bien mis à la terre, puis utilisez le
cordon d'alimentation fourni avec le dispositif pour le connecter à la source
d'alimentation.
PELIGRO
Verifique que circuitos de la fuente de corriente están conectados a tierra correctamente;
luego use el cordón de potencia suministrado con el instrumento para conectarlo a la
fuente de corriente.
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
Danger
B
WARNING
If the installation requires a different power cord than the one supplied with the device,
make sure you use a power cord displaying the mark of the safety agency that defines the
regulations for power cords in your country. The mark is your assurance that the power
cord can be used safely with the device.
GEFAHR
Falls für die Installation ein anderes Stromkabel erforderlich ist (wenn das mit dem Gerät
gelieferte Kabel nicht passt), müssen Sie sicherstellen, dass Sie ein Stromkabel mit dem
Siegel einer Sicherheitsbehörde verwenden, die für die Zertifizierung von Stromkabeln in
Ihrem Land zuständig ist. Das Siegel ist Ihre Garantie, dass das Stromkabel sicher mit
Ihrem Gerät verwendet werden kann.
DANGER
Si l'installation nécessite un cordon d'alimentation autre que celui fourni avec le dispositif,
assurez-vous d'utiliser un cordon d'alimentation portant la marque de l'organisation
responsable de la sécurité qui définit les normes et régulations pour les cordons
d'alimentation dans votre pays. Cette marque vous assure que vous pouvez utiliser le
cordon d'alimentation avec le dispositif en toute sécurité.
PELIGRO
Si la instalación requiere un cordón de corriente distinto al que se ha suministrado con el
instrumento, verifique que usa un cordón de corriente que venga con la marca de la
agencia de seguridad que defina las regulaciones para cordones de corriente en su país.
Esta marca será su garantía de que el cordón de corriente puede ser utilizado con
seguridad con el instrumento.
WARNING
Power supplies are hot swappable. However, Brocade recommends that you disconnect
the power supply from AC power before installing or removing the supply. The device can
be running while a power supply is being installed or removed, but the power supply itself
should not be connected to a power source. Otherwise, you could be injured or the power
supply or other parts of the device could be damaged.
GEFAHR
Netzteile können unter Strom stehend ausgetauscht werden. Allerdings empfiehlt
Brocade, dass Sie das Netzteil vom Netzstrom abtrennen, bevor Sie das Netzteil
anschließen oder abtrennen. Das Gerät kann während des Anschließens oder Abnehmens
des Netzteils laufen. Nur das Netzteil sollte nicht an eine Stromquelle angeschlossen sein.
Ansonsten können Sie verletzt oder das Netzteil bzw. andere Geräteteile beschädigt
werden.
DANGER
Les blocs d'alimentation peuvent être changés à chaud. Cependant, Brocade vous
conseille de débrancher le bloc d'alimentation de l'alimentation C.A. avant d'installer ou
d'enlever le bloc d'alimentation. Le dispositif peut être en cours de fonctionnement
pendant que vous installez ou enlevez un bloc d'alimentation, mais le bloc d'alimentation
lui-même ne doit pas être connecté à une source d'alimentation. Sinon, vous risquez
d'être blessé ou le bloc d'alimentation ou d'autres pièces du dispositif risquent d'être
endommagés.
PELIGRO
Los suministros de corriente pueden intercambiarse sin necesidad de ajustes. No
obstante, Brocade recomienda que desconecte el suministro de corriente de la toma de
corriente alterna antes de instalar o retirar el suministro. El instrumento puede estar
activado cuando se esté instalando o retirando un suministro de corriente, pero el
suministro de corriente en sí no deberá estar conectado a la fuente de corriente. De no
hacerlo así, podría sufrir daños personales o el suministro de corriente u otras piezas
podrían resultar dañadas.
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
103
B
104
Danger
WARNING
Before beginning the installation, refer to the precautions in“Power precautions” on
page 21.
GEFAHR
Vor der Installation siehe Vorsichtsmaßnahmen unter “Power precautions”
(Vorsichtsmaßnahmen in Bezug auf elektrische Ablagen) auf den Seiten 21.
DANGER
Avant de commencer l'installation, consultez les précautions décrites dans “Power
precautions” (Précautions quant à l'alimentation), pages 21.
PELIGRO
Antes de comenzar la instalación, consulte las precauciones en la sección “Power
precautions” (Precauciones sobre corriente) que se encuentra en las páginas 21.
WARNING
For safety reasons, the ESD wrist strap should contain a series 1 Meg ohm resistor.
GEFAHR
Aus Sicherheitsgründen sollte ein EGB-Armband zum Schutz von elektronischen
gefährdeten Bauelementen mit einem 1 Megaohm-Reihenwiderstand ausgestattet sein.
DANGER
Pour des raisons de sécurité, la dragonne ESD doit contenir une résistance de série 1
méga ohm.
PELIGRO
Por razones de seguridad, la correa de muñeca ESD deberá contener un resistor en serie
de 1 mega ohmio.
WARNING
Be careful not to accidently insert your fingers into the fan tray while removing it from the
chassis. The fan may still be spinning at a high speed.
GEFAHR
Die Finger dürfen nicht versehentlich in das Ventilatorblech gesteckt werden, wenn dieses
vom Gehäuse abgenommen wird. Der Ventilator kann sich unter Umständen noch mit
hoher Geschwindigkeit drehen.
DANGER
Faites attention de ne pas accidentellement insérer vos doigts dans le boîtier du
ventilateur lorsque vous l’enlevez du châssis. Il est possible que le ventilateur tourne
encore à grande vitesse.
PELIGRO
Procure no insertar los dedos accidentalmente en la bandeja del ventilador cuando esté
desmontando el chasis. El ventilador podría estar girando a gran velocidad.
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
Appendix
C
Hardware Specifications
Hardware specifications
This section contains the following hardware specifications for the NetIron CES 2000 and NetIron
CER 2000 Series devices:
•
•
•
•
•
“Power specifications”
“Physical dimensions”
“Operating environment”
“Storage environment”
“Safety agency approvals”
Power supply frequency requirements
The power supply frequency requirements for the NetIron CES 2000 and NetIron CER 2000 Series
are as follows:
• AC Input Rating: 100 -240V, 50/60 Hz, 6.0 A Max Per Power Supply
• AC Operating Voltage Range: 85 - 264V, 50/60 Hz
• DC Input Rating: -48V, 15.0 A Max Per Power Supply
• DC Operating Range: -40 to -60 V
Power specifications
This section contains the power specifications for the NetIron CES 2000 and NetIron CER 2000
Series devices.
Table 19 provides the minimum and maximum voltage and current ratings.
TABLE 19
NetIron CES 2000 and NetIron CER 2000 Series operating voltage and current
Power supply
Voltage
Current
AC
100-240 VAC
6A
DC
48 VDC
15 A
Table 20 provides the maximum power calculations.
TABLE 20
Maximum power calculations at 100-240 VAC
NetIron CES 2000 and NetIron CER 2000 Series
chassis
Amps
Watts
BTUs per hour
NetIron CES 2024C
1.45
120
410
NetIron CES 2024C with 2x10G uplink installed
2.30
170
580
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
105
C
Hardware specifications
TABLE 20
Maximum power calculations at 100-240 VAC (Continued)
NetIron CES 2000 and NetIron CER 2000 Series
chassis
Amps
Watts
BTUs per hour
NetIron CES 2024F
2.05
145
495
NetIron CES 2024C with 2x10F uplink installed
2.90
195
666
NetIron CES 2048C
2.05
205
700
NetIron CES 2048CX
2.55
255
870
NetIron CES 2048F
3.45
245
836
NetIron CES 2048FX
3.90
295
1007
NetIron CER 2024C
135
135
461
NetIron CER 2024C with 2x10G uplink installed
205
205
700
NetIron CER 2024F
160
165
546
NetIron CER 2024C with 2x10F uplink installed
230
230
785
NetIron CER 2048C
240
240
819
NetIron CER2048CX
305
310
1041
NetIron CER 2048F
280
295
956
NetIron CER 2048FX
350
365
1195
Physical dimensions
Table 21 provides the physical dimensions for the NetIron CES 2000 and NetIron CER 2000 Series
chassis.
TABLE 21
106
Physical dimensions of the NetIron CES 2000 and NetIron CER 2000 Series devices
NetIron CES 2000 and
NetIron CER 2000 Series
chassis
Height
Width
Depth
Weight (fully-loaded)
NetIron CES 2024C
1 RU
1.7 inches
4.4 cm
17.44 in
44.3 cm
17.64 in
44.8 cm
15.5
NetIron CES 2024C with
2x10G uplink installed
1 RU
1.7 inches
4.4 cm
17.44 in
44.3 cm
17.64 in
44.8 cm
17.5
NetIron CES 2024F
1 RU
1.7 inches
4.4 cm
17.44 in
44.3 cm
17.64 in
44.8 cm
15.5
NetIron CES 2024F with
2x10F uplink installed
1 RU
1.7 inches
4.4 cm
17.44 in
44.3 cm
17.64 in
44.8 cm
17.5
NetIron CES 2048C
1 RU
1.7 inches
4.4 cm
17.44 in
44.3 cm
17.25 in
43.9 cm
16.5
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
Hardware specifications
TABLE 21
C
Physical dimensions of the NetIron CES 2000 and NetIron CER 2000 Series devices
NetIron CES 2000 and
NetIron CER 2000 Series
chassis
Height
Width
Depth
Weight (fully-loaded)
NetIron CES 2048CX
1 RU
1.7 inches
4.4 cm
17.44 in
44.3 cm
17.25 in
43.9 cm
17.5
NetIron CES 2048F
1 RU
1.7 inches
4.4 cm
17.44 in
44.3 cm
17.25 in
43.9 cm
16.5
NetIron CES 2048FX
1 RU
1.7 inches
4.4 cm
17.44 in
44.3 cm
17.25 in
43.9 cm
17.5
NetIron CER 2024C
1 RU
1.7 inches
4.4 cm
17.44 in
44.3 cm
17.64 in
44.8 cm
15.5
NetIron CER 2024C with
2x10G uplink installed
1 RU
1.7 inches
4.4 cm
17.44 in
44.3 cm
17.64 in
44.8 cm
17.5
NetIron CER 2024F
1 RU
1.7 inches
4.4 cm
17.44 in
44.3 cm
17.64 in
44.8 cm
15.5
NetIron CER 2024F with
2x10F uplink installed
1 RU
1.7 inches
4.4 cm
17.44 in
44.3 cm
17.64 in
44.8 cm
17.5
NetIron CER 2048C
1 RU
1.7 inches
4.4 cm
17.44 in
44.3 cm
17.3 in
43.9 cm
16.5
NetIron CER 2048CX
1 RU
1.7 inches
4.4 cm
17.44 in
44.3 cm
17.3 in
43.9 cm
17.5
NetIron CER 2048F
1 RU
1.7 inches
4.4 cm
17.44 in
44.3 cm
17.3 in
43.9 cm
16.5
NetIron CER 2048FX
1 RU
1.7 inches
4.4 cm
17.44 in
44.3 cm
17.3 in
43.9 cm
17.5
Operating environment
Table 22 provides the operating environment specifications for the NetIron CES 2000 and NetIron
CER 2000 Series devices.
TABLE 22
NetIron CES 2000 and NetIron CER 2000 Series operating environment
Operating temperature
Relative humidity
Operating altitude
0C to 40C (32F to 104F)
5% to 90%, at 40C (104F),
non-condensing
10,000 ft (3,048 m)
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
107
C
Hardware specifications
Storage environment
Table 23 provides the storage environment specifications for the NetIron CES 2000 and NetIron
CER 2000 Series devices.
TABLE 23
NetIron CES 2000 and NetIron CER 2000 Series storage environment
Storage temperature




-25 C to 70 C (-13 F to 158 F)
Storage humidity
Storage altitude
95% maximum relative humidity,
non-condensing
15,000 ft (4,500 m) maximum
Cooling
The cooling fans cool the CPU, main memory, and voltage regulators. The fans use a pull
configuration to move the air from the front of the device to the back of the device.
• Total cooling capacity: 350 watts
• Total air flow: 267 LFM
• Fan operating noise:
• Based on ISO 7779
• < 60 dB-A
Safety agency approvals
• CAN/CSA-C22.2 No. 60950-1-03/UL60950-1 – First Edition, Safety of Information Technology
Equipment
• EN 60825-1 Safety of Laser Products – Part 1: Equipment Classification, Requirements and
User’s Guide
• EN 60825-2 Safety of Laser Products – Part 2: Safety of Optical Fibre Communications
Systems
• EN 60950-1:2001\IEC 60950-1 Safety of Information Technology Equipment
Electromagnetic approvals
•
•
•
•
•
•
•
•
•
108
FCC Part 15, Subpart B (Class A)
EN 55022 (CE mark) (Class A)
CISPR-22 (class A)
ICES-003 (Canada) (Class A)
AS/NZ 55022 (Australia) (Class A)
VCCI (Japan) (Class A)
EN 61000-3-2
EN 61000-3-3
EN 61000-6-3
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
Port specifications
C
Port specifications
This section provides pin assignments for the following ports:
• Device’s console port (serial connector)
• Device’s management port (RJ-45 unshielded twisted pair (UTP) connector)
DANGER
The intra-building ports of the equipment or subassembly is suitable for connection to
intra-building or unexposed wiring or cabling only. The intra-building ports of the equipment or
subassembly MUST NOT be metallically connected to interfaces that connect to the OSP or its
wiring. These interfaces are designed for use as intra-building interfaces only (Type 2 or Type 4
ports as described in GR-1089-CORE, Issue 4) and require isolation from the exposed OSP
cabling. The addition of Primary Protectors is not sufficient protection in order to connect these
interfaces metallically to OSP wiring.
Console port pin assignments
The console port is a standard male DB-9 connector, as shown in Figure 45.
FIGURE 45
Console port pin and signalling details
1
6
5
9
Pin number
Switch signal
1
Reserved
2
TXD (output)
3
RXD (input)
4
Reserved
5
GND
6
Reserved
7
CTS (input)
8
RTS (output)
9
Reserved
Most PC serial ports require a cable with a female DB-9 connector. However, terminal connections
will vary, requiring a cable with either a DB-9 or DB-25 connector, male or female.
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
109
C
Port specifications
Serial cable options between the NetIron CES 2000 and NetIron CER 2000 Series device and a PC
or terminal are shown in Figure 46.
NOTE
As indicated in Figure 45 and Figure 46, some of the wires should not be connected. If you do
connect the wires that are labeled “Reserved”, you might get unexpected results with some
terminals.
FIGURE 46
Console port pin assignments showing cable connection options to a terminal or PC
DB-9 to DB-9
Female Switch
Terminal or PC
DB-9 to DB-25
Female Switch
Terminal or PC
1
1
2
2
2
3
3
3
3
2
4
4
5
5
6
6
7
7
8
8
1
4
Reserved
Reserved
5
6
Reserved
7
8
9
Reserved
9
9
Reserved
Reserved
8
20
7
Reserved
6
4
5
Reserved
22
Management port pin assignments
The management port is an RJ-45 UTP connector. Table 24 describes the connector’s pin
assignments.
TABLE 24
110
Management port pin assignments
Pin number
MDI-X ports
1
TD+
2
TD-
3
RD+
4
Not used (10BaseT)
CMT (100BaseTX)
5
Not used (10BaseT)
CMT (100BaseTX)
6
RD-
7
Not used (10BaseT)
CMT (100BaseTX)
8
Not used (10BaseT)
CMT (100BaseTX)
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
C
Power cords
Power cords
The types of power cords provided with the NetIron CES 2000 and NetIron CER 2000 Series are
specific to the country where they are installed. To order a power cord, contact your NetIron CES
2000 and NetIron CER 2000 Series supplier.
TABLE 25
Power cord types (international)
Country
Plug style
NEMA 5-15P
125V only
USA, Canada,
Japan, other
locations
NEMA 5-20P
125V only
USA, Canada,
Mexico, other
locations
NEMA L6-20
USA, Canada,
Mexico, other
locations
CEE-7/7
“Schuko”
Continental
Europe
BS-1363A
various
locations
AS 3112
Australia/New
Zealand
Argentina
X
Australia
X
Austria
X
Bahrain
X
Belgium
Brazil
Chile
X
X
X
X
X
China, People’s
Rep.
Czech, Rep. of
IEC-60309
32A-6h, 230V~
X
X
Denmark
X
Egypt
X
England
X
Finland
X
France
X
Germany
X
Greece
X
Hong Kong
X
Hungary
X
India
Indonesia
X
X
Ireland, North
X
Ireland, South
X
Israel
X
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
111
C
Power cords
TABLE 25
Power cord types (international) (Continued)
Country
Plug style
NEMA 5-15P
125V only
USA, Canada,
Japan, other
locations
NEMA 5-20P
125V only
USA, Canada,
Mexico, other
locations
NEMA L6-20
USA, Canada,
Mexico, other
locations
CEE-7/7
“Schuko”
Continental
Europe
BS-1363A
various
locations
AS 3112
Australia/New
Zealand
Italy
Japan
X
X
X
X
Korea, South
X
Malaysia
Mexico
Alternate
X
X
Recommended
X
Monaco
X
Netherlands
X
New Zealand
X
Norway
X
Poland
X
Portugal
X
Puerto Rico
IEC-60309
32A-6h, 230V~
X
X
X
Russia
X
Saudi Arabia
X
Scotland
X
Singapore
X
South Africa
X
Spain
X
Sweden
X
Switzerland
X
Taiwan
X
X
X
Turkey
X
United Arab
Emirate
X
United Kingdom
X
United States
X
X
X
Venezuela
X
X
X
Yugoslavia
112
X
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
Power cords
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01
C
113
C
114
Power cords
Brocade NetIron CES 2000 and NetIron CER 2000 Hardware Installation Guide
53-1001834-01