Allied Telesis HR7778/00 Datasheet

Datasheet | Network Interface Cards
AT-2451FTX
PCI 32-bit Fast Ethernet Fiber Network Interface Card
AT-2451FTX
10Mbps Ethernet dual fiber
and copper 100TX interface card
Choice and Flexibility
Allied Telesis’ AT-2451FTX is the answer for
those fiber interface cards that support Wakeon-LAN (WoL) for either PCI 2.1 or PCI 2.2
systems but not both. Allied Telesis’ NICs
support WoL through the PCI 2.2 bus and
support PCI 2.1 WoL via external cables.
Resistant to signal degradation, snooping, and
interference, the AT-2451FTX is the ideal
solution for networks requiring protection from
electrical interference and hackers.The small
footprint—together with the low-profile option
of the AT-2451FTX—make these products a
perfect choice for PCs equipped with small
desktop solutions.
Advanced Manageability
Key Features
Allied Telesis’ AT-2451FTX features a full-line of
card assistant software:
Management Software
• AT-Setup reduces Window Driver installation to
a mouse click.This Windows program guides
users through driver installation, updates, and
problem corrections.
• Link aggregation
• AT-Stat is an advanced Windows application
that reports network conditions and
performance such as hardware resources,
network statistics, and configuration.
• The VLAN protocol driver allows network
administrators to configure their VLAN network
fabric at the PC instead of the switch, enabling
transparent movement of systems between
switches.
• TCP/IP checksum off-loading improves CPU
use by verifying TCP/IP traffic checksums at the
interface card rather than at the host processor,
improving overall system performance for
slower PCs.
• Packet prioritization enables Windows
applications with Class of Service capabilities to
prioritize out-bound packet streams to these
NICs, a useful feature for video streaming and
VoIP where interruptions are unacceptable.
• The AT-2451FTX’s onboard Managed Boot
Agent (MBA) provides a wide set of industrystandard boot protocols, including PXE,
NetWare NCP/IPX, IBM’s RPL, traditional
DHCP, and BOOTP, supporting both BBS (BIOS
Boot Specification) and non-BBS compliant PCs.
It also includes an extensive set of utilities for
boot ROM configuration, as well as access to
pre-OS and network boot image files.
• Offering a wide range of connector choices—
ST or SC—these cards meet the requirements
of most fiber installations.
Allied Telesis
• VLAN support
• Failover
Advance Properties
• PCI 2.2 compliant
• Wake-on-LAN (WoL)
• Secured transmissions
• Advanced installation utility
• Advanced diagnostics
• Remote boot (PXE 2.1)
• TCP/IP checksum off-loading
• Priority queuing
• Driver support for popular operating systems
including Sun Solaris
• Available with SC or ST fiber connections
• Compliant with the Trade Agreement Act
• Microsoft certified drivers
• RoHS compliant
• Low-profile and standard height brackets
included
• IPv6
• Also can be used in PCI-x bus
www.alliedtelesis.com
AT-2451FTX | 32-bit PCI Fast Ethernet Fiber Network Interface Card
Specifications
Management Features
WMI
ACPI 2.0/wOI
PXE 2.1 Boot ROM
Connectors
SC
ST
Optical receive sensitivity (max)
Transmit optical power (min/max)
Bus Type
PCI 2.2
Environmental
Operating temperature
Storage temperature
Relative humidity
Ethernet Standards
IEEE 802.1p
Quality of Service
IEEE 802.1Q
VLANs
IEEE 802.2
LLC
IEEE 802.3ac
MAC
IEEE 802.3
10 Ethernet
IEEE 802.3u
Fast Ethernet
Drivers
Supported
Windows 2008
Vista
Vista 64-bit
Windows XP
Windows XP 64-bit
Windows 2003
Windows 2003 64-bit
Windows 2000
NDIS2
NetWare 6.x
Linux 2.4
Linux 2.6
Available
Windows NT 4
Solaris x86
Solaris Sparc 32-bit
Solaris Sparc 64-bit
NetWare 5.x
Compliance
RoHS
UL
FCC/EN55022 Class B
TUV
EN55024
CE
C-TICK
VCCI
Power
Power consumption
Signaling voltage
Ordering Information
-34.4dBm
-18.8/-13.8dBm
Specifications
0°C to 50°C
-25°C to 70°C
5% to 90% non-condensing
4.86 Watts (max)
3.3/5V
Status Indicators
10
ON
10Mbps link up
Green Full-duplex mode
Yellow Half-duplex mode
Blink
Activity
OFF
10Mbps link down
100
ON
Green
Yellow
Blink
OFF
AT-2451FTX/AA-xxx
10Mbps Fast Ethernet dual fiber and copper interface
card
Where AA =
ST or SC
Where xxx =
001 for single pack
020 for 20-pack
901 for single pack,
compliant with Trade Agreements Act
920 for 20-pack,
compliant with Trade Agreements Act
Ships with low profile bracket attached to interface card.
Standard bracket is included in packaging.
100Mbps link up
Full-duplex mode
Half-duplex mode
Activity
100Mbps link down
Physical Characteristics
Dimensions
16.8cm x 6.5cm
(W x H)
(6.7”) x (2.6”)
Ships with low profile bracket attached to interface card.
Standard bracket is included in packaging.
Network Type
10/100TX, 10FL
Network Controller
AMD AM79C976
USA Headquarters | 19800 North Creek Parkway | Suite 100 | Bothell | WA 98011 | USA | T: +1 800 424 4284 | F: +1 425 481 3895
European Headquarters | Via Motta 24 | 6830 Chiasso | Switzerland | T: +41 91 69769.00 | F: +41 91 69769.11
Asia-Pacific Headquarters | 11 Tai Seng Link | Singapore | 534182 | T: +65 6383 3832 | F: +65 6383 3830
www.alliedtelesis.com
© 2008 Allied Telesis Inc. All rights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners.
617-00540 Rev. H