Clarion DXZ538R Owner`s manual

Owner’s manual / Mode d’emploi
Bedienungsanleitung / Istruzioni per l’uso
Gebruiksaanwijzing / Manual de instrucciones
Bruksanvisning / Manual de instruções
RDS-EON FM / MW / LW RADIO CD COMBINATION WITH
DVD / MD / CD CHANGER / DAB / TV CONTROL
•
COMBINÉ RADIO RDS-EON FM / PO / GO ET LECTEUR
CD A CHANGEUR CD / DVD / MD ET COMMANDE DAB /
TÉLÉVISEUR
•
RDS-EON-UKW/MW/LW-RADIO-CD-KOMBINATION MIT
DVD/MD/CD-WECHSLER-/DAB/TV-STEUERUNG
•
CLETTORE CD CON RDS-EON, RADIO MF, AM E OL, IN
COMBINAZIONE CON SCAMBIATORE DVD, MD E CD,
SISTEMA DAB E COMANDO TV
•
RDS-EON FM/MW/LW RADIO CD COMBINATIE MET DVD/
MD/CD-WISSELAAR/DAB/TV BEDIENING
•
COMBINACIÓN DE RADIO DE RDS-EON FM / MW / LW Y
REPRODUCTOR DE DISCOS CD CON CAMBIADOR DE
DISCOS DVD / MD / CD, DAB Y TELEVISOR
•
KOMBINERAD RDS-EON FM/MV/LV-RADIO OCH CDSPELARE MED DVD/MD/CD-VÄXLARE OCH DAB/TVKONTROLL
•
CONJUNTO CD-RADIO RDS-EON FM/MW/LW COM
CONTROLO DE CARREGADOR DVD/MD/CD E DE DAB/TV
Clarion Co., Ltd.
2002/12 (A·D)
All Rights Reserved. Copyright © 2002: Clarion Co., Ltd.
Printed in China / Imprimé en Chine / Gedruckt in China / Stampato in Cina
Gedrukt in China / Impreso en China / Tryckt i Kina / Impresso na China
PE-2553E
280-7885-00
Thank you for purchasing this Clarion product.
∗ Please read this owner’s manual in its entirety before operating this equipment.
∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment).
∗ Check the contents of the enclosed warranty card and keep it carefully with this manual.
∗ This manual includes the operating procedures of the CD changer, MD changer, DVD changer,
DAB and TV tuner connected via the CeNET cable. The CD changer, MD changer, DVD changer
and TV tuner have their own manuals, but no explanations for operating them are described.
CAUTIONS:
This appliance contains a laser system and
is classified as a “CLASS 1 LASER
PRODUCT”. To use this model properly,
read this Owner’s Manual carefully and keep
this manual for your future reference. In
case of any trouble with this player, please
contact your nearest “AUTHORIZED service
station”. To prevent direct exposure to the
laser beam, do not try to open the enclosure.
OBS!
Apparaten innehåller laserkomponenten
som avger laserstrålning överstigande
gränsen för laserklass 1.
R
High-Tech High-Touch
VAROITUS
Suojakoteloa si saa avata. Laite sisältää
laserdiodin, joka lähettää näkymätöntä
silmille vaarallista lasersäteilyä.
» DICHIARAZIONE DI CONFORMITA’ «
(D.M. 28 agosto 1995, no548)
Io, Fabbricante / Mandatario nell’UE
!CAUTION
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED IN THE OWNER’S
MANUAL MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.
ADVARSEL.
Denne mærking er anbragt udvendigt på
apparatet og indikerer, at apparatet arbejder
med laserstråler af klasse 1, hvilket betyder,
at der anvendes laserstråler af svageste
klasse, og at man ikke på apparatets
yderside kan blive udsat for utilladelig
kraftig stråling.
APPARATET BØR KUN ÅBNES AF
FAGFOLK MED SÆRLIGT KENDSKAB TIL
APPARATER MED LASERSTRÅLER!
Indvendigt i apparatet er anbragt den her
gengivne advarselsmækning, som advarer
imod at foretage sådanne indgreb i
apparatet, at man kan komme til at udsaætte
sig for laserstråling.
2
DXZ538R
MODEL
Clarion Europa GmbH
Hessenring 19-21
64546 Mörfelden-Walldorf
Dichiaro che il prodotto
Autoradio
DXZ538R
è conforme alle disposizioni contenute nel suddetto
decreto relativamente alla prevenzione e l’eleminazione
dei disturbi radioelettrici provocati dai ricevitori di
radiodiffusione sonora e televisiva.
Io, Fabbricante / Mandatario nell’UE
Data
Clarion Europa GmbH
Hessenring 19-21
64546 Mörfelden-Walldorf
DXZ538R
281
Contents
Display Items
: Mute indication
: Enter indication
: Manual indication
Preset channel indication (1 to 6)
Disc number indication (1 to 12)
Stereo indication
: Disc indication
: Scan indication
: Repeat indication
: Random indication
: DAB indication
: Alternative frequency indication
: Regional indication
: Traffic announcement indication
: Traffic programme indication
: Programme type indication
: Information indication
: MAGNA BASS EXTEND indication
LCD Screen
In extreme cold, the screen movement may slow down and the screen may darken, but this is normal.
The screen will recover when it returns to normal temperature.
DXZ538R
or
Do not play heart-shaped, octagonal, or other
specially shaped compact discs.
Some CDs recorded in CD-R/CD-RW mode
may not be usable.
Handling
• Compared to ordinary music CDs, CD-R and
CD-RW discs are both easily affected by high
temperature and humidity and some of CD-R
and CD-RW discs may not be played.
Therefore, do not leave them for a long time in
the car.
• New discs may have some roughness around
the edges. If such discs are used, the player
may not work or the sound may skip. Use a
ball-point pen or the like to remove any roughness from the edge of the disc.
Ball-point pen
• Do not use commercially available CD protection sheets or discs equipped with stabilizers,
etc. These may damage the disc or cause
breakdown of the internal mechanism.
Storage
• Do not expose compact discs to direct sunlight or any heat source.
• Do not expose compact discs to excess humidity or dust.
• Do not expose compact discs to direct heat
from heaters.
Cleaning
• To remove fingermarks and dust, use a soft
cloth and wipe in a straight line from the center of the compact disc to the circumference.
• Do not use any solvents, such as commercially available cleaners, anti-static spray, or
thinner to clean compact discs.
• After using special compact disc cleaner, let
the compact disc dry off well before playing it.
Roughness
1. PRECAUTIONS
1. This unit is applicable for on-road 4 wheel
vehicle purpose only. Use for tractor, fork
truck, bulldozer, off road vehicle, 2 or 3 wheel
motor bicycle, marine boat or other special
purpose vehicle is not appropriate.
2. When the inside of the car is very cold and
the player is used soon after switching on the
heater moisture may form on the disc or the
optical parts of the player and proper playback may not be possible. If moisture forms
on the disc, wipe it off with a soft cloth. If
moisture forms on the optical parts of the
player, do not use the player for about one
hour. The condensation will disappear naturally allowing normal operation.
3. Driving on extremely bumpy roads which
cause severe vibration may cause the sound
to skip.
INFORMATION FOR USERS:.
CHANGES OR MODIFICATIONS TO THIS
PRODUCT NOT APPROVED BY THE MANUFACTURER WILL VOID THE WARRANTY.
8
Use only compact discs bearing the
mark.
Flip Down Panel
This unit uses a flip-down structure that makes
possible large-size displays.
CAUTION
When opening and closing the FLIP DOWN
PANEL, be careful not to catch your fingers.
They could be injured.
1. Always use this unit with the FLIP DOWN
PANEL closed.
2. Do not force operations or use this device
abnormally when opening or closing the FLIP
DOWN PANEL.
3. Do not use the FLIP DOWN PANEL as a tray
to place objects on when it is open.
4. When closing the FLIP DOWN PANEL, do
not press the [OPEN] button.
5. Strong impacts to the operating or display
section can cause damage or deformation.
6. If the FLIP DOWN PANEL does not open
fully, gently open it with your hand.
DXZ538R
3
• Never stick labels on the surface of the compact disc or mark the surface with a pencil or
pen.
• Never play a compact disc with any cellophane tape or other glue on it or with peeling
off marks. If you try to play such a compact
disc, you may not be able to get it back out of
the CD player or it may damage the CD
player.
• Do not use compact discs that have large
scratches, are misshapen, cracked, etc. Use
of such discs may cause misoperation or
damage.
• To remove a compact disc from its storage
case, press down on the center of the case
and lift the disc out, holding it carefully by the
edges.
Be sure to unfold and read the next page. / Veuillez déplier et vous référer à la page suivante.
Bitte ausbreiten und die nächste Seite lesen. / Assicurarsi di aprire e leggere la pagina successiva.
Volgende pagina uitvouwen en doorlezen a.u.b. / Cerciórese de desplegar y de leer la página siguiente.
Glöm inte att vika ut och läsa nästa sida. / Não deixe de abrir e ler a próxima página.
DXZ538R
4
English
Operation status indication
Titles, PS names, PTYs, CT (clock), etc.
are displays.
1. PRECAUTIONS .............................................................................................................................. 3
Flip Down Panel .............................................................................................................................. 3
Handling Compact Discs ................................................................................................................. 4
2. CONTROLS .................................................................................................................................... 5
3. NOMENCLATURE .......................................................................................................................... 6
Names of the Buttons and Their Functions ..................................................................................... 6
Major Button Operations When External Equipment is Connected to This Unit .............................. 7
Display Items ................................................................................................................................... 8
LCD Screen ..................................................................................................................................... 8
4. DCP ................................................................................................................................................. 9
5. REMOTE CONTROL (Optional) ................................................................................................... 10
Inserting the Batteries .................................................................................................................... 10
Functions of Remote Control Unit Buttons ..................................................................................... 11
6. OPERATIONS ............................................................................................................................... 12
Basic Operations ........................................................................................................................... 12
Radio Operations ........................................................................................................................... 14
RDS Operations ............................................................................................................................ 16
CD Operations ............................................................................................................................... 19
Operations Common to Each Mode .............................................................................................. 21
7. OPERATIONS OF ACCESSORIES .............................................................................................. 24
CD/MD Changer Operations ......................................................................................................... 24
TV Operations ............................................................................................................................... 26
Digital Radio/DAB Operations ....................................................................................................... 27
8. IN CASE OF DIFFICULTY ............................................................................................................ 31
9. ERROR DISPLAYS ....................................................................................................................... 32
10. SPECIFICATIONS ....................................................................................................................... 276
English
English
Z-Enhancer Plus indication
Handling Compact Discs
Note:
• Be sure to read this chapter referring to the front diagrams of chapter “2. CONTROLS” on page 5 (unfold).
Français Deutsch
Names of the Buttons and Their Functions
Main unit / Appareil principal / Hauptgerät / Apparecchio principale
Hoofdtoestel / Unidad principal / Huvudenhet / Unidade principal
[ROTARY]
[OPEN]
[OPEN] button
[RDM] button
• Deeply push in [OPEN] button to unlock the
flip down panel.
• Perform random play while in the CD mode.
[RPT] button
[FNC]
[A-M]
[BND]
[Z+]
[TA]
[COLOR]
Italiano
[
Nederlands Español Svenska Português
[
], [
]
[AF]
]
[DIRECT]
[DN]
[SCN]
[D]
[UP]
[T]
[P/A]
[RPT]
• Use the button to set the TA (Traffic Announcement) standby mode.
[COLOR] button
• Button’s color change to multicolor.
[AF] button
With the FLIP DOWN PANEL opened / Ouvrez le PANNEAU RABATTABLE
ÖFFNUNG DER KLAPPSCHALTTAFEL / Apertura del PANNELLO APRIBILE
Met het NEERKLAPBARE PANEEL geopend / Apertura del PANEL ABATIBLE
DEN NEDFÄLLBARA PANELEN öppen / Abrindo o PAINEL RECLINÁVEL
[
]
• Press the button to turn on or off the AF (Alternative Frequency) function.
• When the button is pressed and held,
Regional function can select ON or OFF.
[D] button
[CD SLOT]
• Switch the display indication (Main display,
Sub display, Clock display).
[T] button
• Use the button to input a title in the CD
mode.
• Press and hold the button for 1 second or
longer to enter the adjust mode.
[P/A] button
• Perform preset scan while in the radio mode.
When the button is pressed and held, auto
store is performed.
Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.
Remarque: Veuillez déplier cette page et vous référer aux schémas quand vous lisez chaque chapitre.
Hinweis: Bitte diese Seite ausfalten und beim Lesen der einzelnen Kapitel die Frontdiagramme beachten.
Nota: Assicurarsi di aprire questa pagina e fare riferimento a questi diagrammi quando si legge ciascun capitolo.
Opmerking: Vouw deze pagina uit en zie tevens de afbeeldingen van het voorpaneel tijdens het doorlezen van de volgende hoofdstukken.
Nota: Cuando lea los capítulos, despliegue esta página y consulte los diagramas.
Observera: Vik ut denna sida för att kunna se figurerna över bilstereons framsida medan du läser de olika kapitlen.
Nota: Certifique-se de abrir esta página e consulte os diagramas frontais conforme realiza a leitura de cada capítulo.
DXZ538R
[UP], [DN] buttons
• Select the disc.
[DIRECT] buttons
[P/A] button
• Perform preset scan while in the TV mode.
When the button is pressed and held, auto
store is performed. (This function is only TV
tuner.)
[T] button
[
• Use the button to input a title in the CD
changer mode.
• Use the button to scroll the title during CD-text
play or MD changer play in the MD changer
mode.
• Use the button to set the PTY (Programme
Type) standby mode or PTY items in the DAB
mode.
• Switch the TV picture mode or VTR (external)
picture mode.
• Select a station while in the radio mode or
select a track when listening to a CD. These
buttons are used to make various settings.
• Press and hold the button for 1 second or
longer to switch the fast-forward/fastbackward.
[UP], [DN] buttons
[TA] button
• Select the disc.
• Use the button to set the TA (Traffic Announcement) standby mode in the DAB
mode. (This function is only DAB tuner.)
[BND] button
[RPT] button
[a], [d] buttons
• Switch the band, or seek tuning or manual
tuning while in the radio mode.
• Play a first track while in the CD mode.
• Perform repeat play. When this button is
pressed and held, disc repeat play is performed.
• Select a station.
[A-M] button
• Move the next disc in increasing order.
• Use the button to switch to the audio mode
(bass/treble, balance/fader Z-Enhancer Plus,
Magna Bass Extended adjustment)
[SCN] button
[SCN] button
[TA] button
[D] button
∗ For details, see the section “TV operations” or “DAB operations”.
[
• Adjust the volume by turning the knob clockwise or counterclockwise.
• Use the knob to perform various settings.
• Use the button to select one of the 4 types of
sound characteristics already stored in
memory.
∗ For details, see the section “CD/MD
changer operations”. For the DVD
changer, refer to the Owner’s Manual provided with the DVD changer.
● When the TV/DAB is connected
• Perform scan play for 10 seconds of each
track while in the CD mode.
• Repeat play while in the CD mode.
[Z+] button
● When the CD/MD/DVD changer
is connected
• When the button is pressed and held,
switches the disc titles or track titles while in
the MD changer mode.
• When the button is pressed and held,
switches the user titles or track titles, etc.
while in the CD changer mode.
[ROTARY] knob
[RDM]
5
Major Button Operations When External Equipment is
Connected to This Unit
3. NOMENCLATURE
] button
• Use the button to set the PTY (Programme
Type) standby mode or PTY items.
• Play or pause a CD while in the CD mode.
[a], [d] buttons
[FNC] button
• Press the button to turn on the power.
Press and hold the button for 1second or
longer to turn off the power.
• Switch the operation mode among the Radio
mode, etc.
[Q] button
• Eject a CD when it is loaded into the unit.
[RDM] button
• Perform random play. Also perform disc random play when the button is pressed and
held.
[BND] button
[AF] button
• Press the button to turn on or off the AF (Alternative Frequency) function in the DAB
mode. (This function is only DAB tuner.)
] button
[DIRECT] buttons
• Store a station into memory or recall it directly.
[BND] button
• Switch the band.
• When the button is pressed and held, switch
seek tuning or manual mode.
• Perform scan play for 10 seconds of each
track. Disc scan play is performed when the
button is pressed and held.
[
] button
• Play or pause a CD, MD or DVD.
[a], [d] buttons
• Select a track when listening to a disc.
• Press and hold the button for 1 second or
longer to switch the fast-forward/fastbackward.
[CD SLOT]
• CD insertion slot.
• Store a station into memory or recall it directly while in the radio mode.
6
DXZ538R
DXZ538R
7
English
English
2.
English
CONTROLS / LES COMMANDES / REGLER / CONTROLLI
REGELAARS / CONTROLES / KONTROLLER / CONTROLOS
The control panel can be detached to prevent
theft. When detaching the control panel, store it
in the DCP (DETACHABLE CONTROL PANEL)
case to prevent scratches.
We recommend taking the DCP with you when
leaving the car.
Removing the DCP
1. Press the [FNC] button for 1 second or
longer to turn off the power.
2. Deeply push in [OPEN] button to unlock the
flip down panel.
English
4. DCP
CAUTION
Be sure to close the HOLD FLAP for safety
when removing the DCP.
Attaching the DCP
1. Insert the right side of the DCP into the main
unit.
2. Insert the left side of the DCP into the main
unit.
2.
∗ If the flip down panel does not open fully, gently open it with your hand.
[OPEN] button
DCP
1.
CAUTION
DCP
3. Pull the DCP toward you and remove it.
DCP
4. Close the HOLD FLAP.
• The DCP can easily be damaged by
shocks. After removing it, be careful not to
drop it or subject it to strong shocks.
• If the FLIP DOWN PANEL is kept open, the
DCP may drop due to vibration of the car.
This results in damage to the DCP. So
close the FLIP DOWN PANEL or remove
the DCP to store into the case.
• The connector connecting the source unit
and the DCP is an extremely important
part. Be careful not to damage it by pressing on it with fingernails, screwdrivers, etc.
Note:
• If the DCP is dirty, wipe off the dirt with a soft, dry
cloth only.
HOLD FLAP
DXZ538R
9
English
5. REMOTE CONTROL (Optional)
Receiver for remote control unit
Operating range: 30˚ in all directions
If you buy the RCB-130 sold
separately, you can enjoy the use of
the Remote Control function.
Signal transmitter
Remote control unit
[FUNC]
[
[
],[
]
]
[ ],[ ]
[BAND]
[TA]
[MUTE]
[DISP]
[PS/AS]
[PTY]
[AF]
Inserting the Batteries
1. Turn the remote control unit over, then slide the
rear cover in the direction of the arrow.
2. Insert the AA (SUM-3, IECR-6/1.5V) batteries
that came with the remote control unit facing in
the directions shown in the figure, then close the
rear cover.
Notes:
Using batteries improperly can cause them to
explode. Take note of the following points:
• When replacing batteries, replace both batteries
with new ones.
• Do not short-circuit, disassemble or heat batteries.
• Do not dispose of batteries into fire or flames.
• Dispose of spent batteries properly.
10
DXZ538R
AA (SUM-3, IECR-6/1.5V)
Batteries
Rear cover
Rear side
Mode
Radio (RDS)
CD/MD changer
DVD changer
CD
Button
TV
[FUNC]
Switches among radio, DAB, CD, CD/MD changer, DVD changer and TV.
[BAND]
Switches reception
band.
Plays the first track.
Top play.
Moves the next disc
in increasing order.
Switches reception
band.
[
],[
]
Increases and decreases volume (in all modes).
[
],[
]
Moves preset
channels up and
down.
Moves tracks up and down.
When pressed and held for 1 second or
longer:
Fast-forward/fast-backward.
Moves preset
channels up and
down.
No function.
Switches between playback and pause.
No function.
[
]
[MUTE]
[TA]
[DISP]
English
Functions of Remote Control Unit Buttons
Turns mute on and off.
TA on and off.
Switches among main display, sub display, clock (CT) display.
[PS/AS]
Preset scan.
When pressed and
held for 2 seconds or
longer: Auto store.
Scan play.
Scan play.
When pressed and
held for 1 second or
longer: Disc scan
play.
Preset scan.
When pressed and
held for 2 seconds or
longer: Auto store.
[AF]
AF function on and
off.
When pressed and
held for 1 second or
longer: REG function
on and off
Repeat play.
Repeat play.
When pressed and
held for 1 second or
longer: Disc repeat
play.
No function.
PTY standby mode
on and off.
Random play.
Random play.
When pressed and
held for 1 second or
longer: Disc random
play.
Switches between TV
and VTR.
[PTY]
∗ Some of the corresponding buttons on the main unit and remote control unit have different functions.
DXZ538R
11
English
6. OPERATIONS
Basic Operations
Note:Be sure to read this chapter referring to the front diagrams of
chapter “2. CONTROLS” on page 5 (unfold).
CAUTION
Be sure to lower the volume before switching off the unit power or the ignition key. The
unit remembers its last volume setting. If
you switch the power off with the volume up,
when you switch the power back on, the
sudden loud volume may hurt your hearing
and damage the unit.
∗ The volume level is from 0 (minimum) to 33 (maximum).
Switching the display
Press the [D] button to select the desired display.
Each time you press the [D] button, the display
switches in the following order:
Main display
Turning on/off the power
Note:
• Be careful about using this unit for a long time
without running the engine. If you drain the car’s
battery too far, you may not be able to start the
engine and this can reduce the service life of the
battery.
1. Press the [FNC] button.
2. The illumination and display on the unit light
up. The unit automatically remembers its last
operation mode and will automatically switch
to display that mode.
3. Press and hold the [FNC] button for 1 second
or longer to turn off the power for the unit.
Note:
• System check
The first time this unit is turned on after the wire
connections are completed, it must be checked
what equipment is connected. When the power is
turned on, “SYSTEM” and “PUSH PWR” appear
in the display alternately, so press the [FNC] button. The system check starts within the unit.
When the system check is complete, press the
[FNC] button again.
Selecting a mode
1. Press the [FNC] button to change the operation mode.
2. Each time you press the [FNC] button, the operation mode changes in the following order:
Radio mode ➜ DAB mode ➜ CD mode ➜
CD changer mode ➜ MD changer mode ➜
DVD changer mode ➜ TV mode ➜ Radio
mode...
∗ External equipment not connected with
CeNET is not displayed.
Adjusting the volume
Turning the [ROTARY] knob clockwise increases the volume; turning it counterclockwise
decreases the volume.
12
DXZ538R
Sub display
Clock (CT) display
Main display
∗ Once selected, the preferred display becomes
the display default. When a function adjustment such as volume is made, the screen will
momentarily switch to that function’s display,
then revert back to the preferred display several seconds after the adjustment.
∗ For information on how to enter a title, refer to
the subsection “Entering titles” in section
“Operations Common to Each Mode”.
∗ When CT data is not received, “CT––:––” appears in the display.
Setting the Z-Enhancer Plus
This unit are provided with 4 types of sound tone effects stored in memory. Select the one you prefer.
∗ The factory default setting is “Z+ OFF”.
Each time you press the [Z+] button, the tone effect changes in the following order:
“Z+ OFF” ➜ “B-BOOST” ➜ “IMPACT” ➜
“EXCITE” ➜ “CUSTOM” ➜ “Z+ OFF” ...
• B-BOOST
: bass emphasized
• IMPACT
: bass and treble emphasized
Basic Operations
• CUSTOM
• Z+ OFF
: bass and treble emphasized mid de-emphasized
: user custom
: no sound effect
Adjusting the Subwoofer
∗ The factory default setting is “S-VOL 0”
When you select one of the mode (LPF 50, LPF
80, LPF 120).
1. Press the [A-M] button, “S-VOL 0” appears in
the display.
2. Turn the [ROTARY] knob to select from –6 to
+6.
3. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Adjusting the tone
Press the [A-M] button and select the item to
adjust. Each time you press the [A-M] button,
the item changes as following order:
●When “B-BOOST” is set
“S-VOL 0” ➜ “B-BOOST” ➜ “BAL 0” ➜
“FAD 0” ➜ Last function mode.
●When “IMPACT” is set
“S-VOL 0” ➜ “IMPACT” ➜ “BAL 0” ➜ “FAD
0” ➜ Last function mode.
●When “EXCITE” is set
“S-VOL 0” ➜ “EXCITE” ➜ “BAL 0” ➜ “FAD
0” ➜ Last function mode.
●When “CUSTOM” is set
“S-VOL 0” ➜ “BASS” ➜ “TREBLE” ➜
“BAL 0” ➜ “FAD 0” ➜ Last function mode.
●When “Z+ OFF” is set
“S-VOL 0” ➜ “BAL 0” ➜ “FAD 0” ➜ Last
function mode.
Note:
• As subwoofer is effective, “S-VOL 0” can be
selected.
Adjusting the bass (Gain,
Frequency, Q-curve)
This adjustment can be performed when the ZEnhancer Plus is set to “CUSTOM”.
1. Press the [A-M] button and select “BASS”.
2. Turning the [ROTARY] knob clockwise emphasizes the bass; turning it counterclockwise attenuates the bass.
∗ The factory default setting is “B<G 0>”. (Adjustment range: –6 to +6)
3. Press the [d] or [a] button to select “B<F
60>”.
Turninng the [ROTARY] knob clockwise or
counterclockwise to select the frequency.
∗ The factory default setting is “B<F 60>”.(Adjustment 60/100/200 Hz)
4. Press the [d] or [a] button to select “B<Q 1>”.
Turninng the [ROTARY] knob clockwise or
counterclockwise to select the Q-curve.
∗ The factory default setting is “B<Q 1>”.(Adjustment 1/1.25/1.5/2)
5. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Adjusting the treble (Gain,
Frequency)
This adjustment can be performed when the ZEnhancer Plus is set to “CUSTOM”.
1. Press the [A-M] button and select “TREBLE”.
2. Turning the [ROTARY] knob clockwise emphasizes the treble; turning it counterclockwise attenuates the treble.
∗ The factory default setting is “T<G 0>”. (Adjustment range: –6 to +6)
3. Press the [d] or [a] button to select “T<F
10>”.
Turninng the [ROTARY] knob clockwise or
counterclockwise to select the frequency.
∗ The factory default setting is “T<F 10>”.(Adjustment 10 kHz/15 kHz)
4. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Adjusting the balance
1. Press the [A-M] button and select “BAL 0”.
2. Turning the [ROTARY] knob clockwise emphasizes the sound from the right speaker;
turning it counterclockwise emphasizes the
sound from the left speaker.
∗ The factory default setting is “BAL 0”. (Adjustment range: L13 to R13)
3. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Adjusting the fader
1. Press the [A-M] button and select “FAD 0”.
2. Turning the [ROTARY] knob clockwise emphasizes the sound from the front speakers;
turning it counterclockwise emphasizes the
sound from the rear speakers.
DXZ538R
13
English
• EXCITE
Basic Operations
English
∗ The factory default setting is “FAD 0”. (Adjustment range: F12 to R12)
3. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Adjusting the Z-Enhancer Plus
1. Press the [Z+] button and select the Z-Enhancer Plus mode to adjust.
2. Press the [A-M] button and turning the [ROTARY] knob clockwise adjusts in the + direction; tuning it counterclockwise adjusts in the
– direction.
●When “B-BOOST 0” is selected, you can
adjust the bass in the range of –3 to 3.
●When “IMPACT 0” is selected, you can
adjust the bass and treble in the range of
–3 to 3.
●When “EXCITE 0” is selected, you can adjust the bass and treble in the range of –3
to 3.
∗ When Z-Enhancer Plus is selected, press and
hold the [Z+] button for 2 seconds or longer to
change to the “CUSTOM” mode.
Bass/treble characteristics become flat and the
indication “Z+FLAT” is shown in the display.
Press the [Z+] button again to change to the
“Z+ OFF” mode.
Adjusting MAGNA BASS EXTEND
The MAGNA BASS EXTEND does not adjust
the low sound area like the normal sound
adjustment function, but emphasizes the deep
bass sound area to provide you with a dynamic
sound.
1. Press and hold the [A-M] button for 1 second
or longer to turn on the MAGNA BASS
EXTEND effect. “M-B EX” lights in the display.
2. Press and hold the [A-M] button for 1 second or
longer to turn off the MAGNA BASS EXTEND
effect. “M-B EX” goes off from the display.
∗ The factory default setting is off.
CT (Clock Time) function
The CT function receives CT data sent from a
RDS station and displays the time. Press the [D]
button to switch to the CT display.
∗ If a CT data is not being received, “CT––:––” appears in the display.
Note:
• CT data is not transmitted in some countries and
by some broadcast stations. Also, in some areas,
the CT may not display accurately.
14
DXZ538R
Radio Operations
Listening to the radio
1. Press the [FNC] button and select the radio
mode. The frequency or PS appears in the
display.
∗ PS: Programme service name
2. Press the [BND] button and select the radio
band. Each time the button is pressed, the radio reception band changes in the following
order:
FM1 ➜ FM2 ➜ FM3 ➜ AM (MW/LW) ➜ FM1...
3. Press the [a] or [d] button to tune in the
desired station.
Tuning
There are 3 types of tuning mode available, seek
tuning, manual tuning and preset tuning.
Seek tuning
There are 2 types of seek tuning: DX SEEK and
LOCAL SEEK.
DX SEEK can automatically tune in to receivable broadcast stations; LOCAL SEEK can tune
in to only broadcast stations with a good reception sensitivity.
1. Press the [BND] button and select the desired band (FM or AM (MW, LW)).
2. Tune into a station.
∗ If “MANU” is lit in the display, press and hold
the [BND] button for 1 second or longer.
“MANU” in the display goes off and seek tuning is now available.
∗ If “TA” is lit in the display, TP stations are automatically sought.
●DX SEEK
Press the [a] or [d] button to automatically
seek a station.
When the [d] button is pressed, the station is
sought in the direction of higher frequencies; if
the [a] button is pressed, the station is sought
in the direction of lower frequencies.
∗ When seek tuning starts, “DX” appears in the display.
●LOCAL SEEK
If you press and hold the [a] or [d] button for
1 second or longer, local seek tuning is carried
out. Broadcast stations with good reception sensitivity are selected.
∗ When local seeking starts, “LO” appears in the display.
Radio Operations
Auto store
There are 2 ways available: Quick tuning and
step tuning.
When you are in the step tuning mode, the frequency changes one step at a time. In the quick
tuning mode, you can quickly tune the desired
frequency.
1. Press the [BND] button and select the desired band (FM or AM (MW/LW)).
Auto store is a function for storing up to 6 stations that are automatically tuned in sequentially. If 6 receivable stations cannot be received,
a previously stored station remains
unoverwritten at the memory position.
1. Press the [BND] button and select the desired band (FM or AM (MW/LW)).
2. Press and hold the [P/A] button for 2 seconds or longer. The stations with good reception are stored automatically to the preset
channels.
∗ If “MANU” is not lit in the display, press and
hold the [BND] button for 1 second or longer.
“MANU” is lit in the display and manual tuning
is now available.
2. Tune into a station.
●Quick tuning:
Press and hold the [a] or [d] button for 1
second or longer to tune in a station.
●Step tuning:
Press the [a] or [d] button to manually
tune in a station.
Recalling a preset station
A total of 24 preset positions (6-FM1, 6-FM2, 6FM3, 6-AM) exist to store individual radio stations in memory. Pressing the corresponding
[DIRECT] button recalls the stored radio frequency automatically.
1. Press the [BND] button and select the desired band (FM or AM (MW/LW)).
2. Press the corresponding [DIRECT] button to
recall the stored station.
∗ If auto store is performed in the FM bands, the
stations are stored in FM3 even if FM1 or FM2
was chosen for storing stations.
Preset scan
Preset scan receives the stations stored in preset memory in order. This function is useful
when searching for a desired station in memory.
1. Press the [P/A] button.
2. When a desired station is tuned in, press the
[P/A] button again to continue receiving that
station.
Note:
• Be careful not to press and hold the [P/A] button
for 2 seconds or longer, otherwise the auto store
function is engaged and the unit starts storing
stations.
∗ Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store that station
into preset memory.
Manual memory
1. Select the desired station with seek tuning,
manual tuning or preset tuning.
2. Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store the current
station into preset memory.
DXZ538R
15
English
Manual tuning
RDS Operations
English
RDS (Radio Data System)
This unit has a built-in RDS decoder system that
supports broadcast stations transmitting RDS data.
This system can display the name of the broadcast station being received (PS) and can automatically switch to the broadcast station with the
best reception as you move long distances (AF
switching).
Also, if a traffic announcement or programme
type is broadcast from an RDS station, no matter
what mode you are in, this broadcast is received.
Additionally, if EON information is received, this
information enables automatic switching of other
preset stations on the same network and interruption of the station being received with traffic
information from other stations (TP). This function is not available in some areas.
When using the RDS function, always set the
radio to FM mode.
• AF
: Alternative Frequency
• PS
: Programme Service Name
• PTY : Programme Type
• EON : Enhanced Other Network
• TP
: Traffic Programme
∗ RDS interrupt does not function during AM radio
reception.
∗ When set receives RDS signal, and can read PS
data, PS appears in the display.
AF function
The AF function switches to a different frequency on the same network in order to maintain optimum reception.
∗ The factory default setting is “ON”.
●Switching OFF the AF function
Press the [AF] button. “AF” in the display goes
off and the AF function turns off.
●Switching ON the AF function
Press the [AF] button. “AF” in the display lights
and the AF function turns on.
∗ If the reception of the current broadcast station deteriorates, “SEARCH” appears in the display and
the radio searches for the same programme on
another frequency.
●AF function between RDS and DAB
When the same programme is broadcast by
both RDS and DAB, and this function is ON, the
unit switches to receiving the broadcast with the
better reception automatically.
∗ This function only operates when the DAH913 or
DAH9500z DAB unit, sold separately, is connected.
∗ This factory default setting is “ON”.
16
DXZ538R
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button to select “LINK
ACT”.
3. Turn the [ROTARY] knob clockwise for “ON”
or counterclockwise for “OFF”.
● ON:
AF switching between DAB and RDS enabled.
● OFF:
AF switching between DAB and RDS disabled.
4. Press the [T] button to return to the previous
mode.
REG (Regional programme) function
When the REG function is ON, the optimum regional station can be received. When this function is OFF, if the regional station area switches
as you drive, a regional station for that region is
received.
∗ The factory default setting is “OFF”.
Notes:
• This function is disabled when a national station
such as BBC R2 is being received.
• The REG function ON/OFF setting is valid when
the AF function is ON.
●Switching the REG function ON
Press and hold the [AF] button for 1 second or
longer.
“REG” in the display lights and the REG function
turns on.
●Switching the REG function OFF
Press and hold the [AF] button for 1 second or
longer.
“REG” in the display goes off and the REG function turns off.
Manually tuning a regional station
in the same network
1. This function is valid when the AF function is
ON and the REG function is OFF.
Note:
• This function can be used when a regional broadcast of the same network is received.
2. Press any one of the [DIRECT] buttons to
call out the regional station.
3. If the reception condition of the called out
station is bad, press the [DIRECT] button of
the same number. The unit receives a local
station on the same network.
RDS Operations
∗ This function can only be used when “TP” is lit in
the display. When “TP” is lit, this means that the
RDS broadcast station being received has traffic
announcement programmes.
●Setting the TA standby mode
If you press the [TA] button when only “TP” is lit
in the display, “TP” and “TA” light in the display
and the unit is set into the TA standby mode until
a traffic announcement is broadcast. When a
traffic announcement broadcast starts, “TRA
INFO” appears in the display. If you press the
[TA] button while a traffic announcement
broadcast is being received, the traffic announcement broadcast reception is cancelled and the
unit goes into the TA standby mode.
●Cancelling the TA standby mode
As “TP” and “TA” lit in the display, press the [TA]
button. The “TA” in the display goes off and the
TA standby mode is cancelled.
∗ If “TP” is not lit, pressing the [TA] button searches
for a TP station.
●Searching for a TP station
When “TP” is not lit, if you press the [TA] button,
“TA” in the display lights and the unit automatically receives a TP station.
Note:
• If a TP station is not received, the unit continues
the search operation. Pressing [TA] button again
goes off “TA” in the display and stops TP station
searching.
Auto store function for TP stations
You can automatically store up to 6 TP stations into
preset memory. If the number of TP can be received
less than 6, broadcast stations already stored in
memory and left without being overwritten.
As “TA” lit in the display, press and hold the [P/
A] button for 2 seconds or longer. The TP stations with the good reception sensitivity are
stored into preset memory.
∗ Even if you select FM1 or FM2, a TP station is stored
into memory for FM3.
PTY
This function enables you to listen to a broadcast of the selected programme type even if the
unit is on a function mode other than radio.
∗ Some countries do not yet have PTY broadcast.
∗ In the TA standby mode, a TP station has priority
over a PTY broadcast station.
●Setting the PTY standby mode
When you press the [
] button, “PTY” lights in
the display and the PTY standby mode is turned
on. When the selected PTY broadcast starts, the
PTY item name appears in the display.
●Cancelling the PTY standby mode
When you press and hold the [
] button for 2
second or longer, “PTY” goes off in the display
and PTY standby mode is cancelled.
●Cancelling a PTY interrupt broadcast
Press the [
] button during the PTY interrupt
broadcast, the PTY interrupt is cancelled and
the unit returns to PTY standby mode.
Selecting PTY
1. When you press the [
] button, the unit
goes into PTY select mode.
2. Press any one of the [DIRECT] buttons. Alternatively, turn the [ROTARY] knob clockwise or counterclockwise to select the desired PTY.
∗ Below are the factory default settings stored
for the [DIRECT] buttons.
Preset
number
PTY item
ENGLISH
Contents
1
NEWS
News
2
INFO
Information
3
POP M
Pop Music
4
SPORT
Sport
5
CLASSICS Serious Classical Music
6
EASY M
Easy Listening Music
3. The PTY select mode is cancelled automatically 7 seconds after a PTY is selected.
PTY seek
1. When you press the [
] button, the PTY
select mode is turned on.
2. Select PTY.
3. Press the [a] or [d] button. If you press
the [d] button, the unit seeks a PTY broadcast moving up the frequencies; if you press
the [a] button, it seeks moving down the
frequencies.
∗ If no station with the selected PTY broadcast
can be received, the unit returns to the
previous mode.
DXZ538R
17
English
TA (Traffic Announcement)
In the TA standby mode, when a traffic announcement broadcast starts, the traffic announcement
broadcast is received as top priority regardless of
the function mode so you can listen to it. Traffic
programme (TP) automatic tuning is also possible.
RDS Operations
English
PTY preset memory
1. When you press the [
] button, the PTY
select mode is turned on.
2. Turn the [ROTARY] knob clockwise or counterclockwise to select the desired PTY.
The 29 types of PTY below can be selected.
3. If you press and hold any one of the [DIRECT] buttons for 2 seconds or longer, the
selected PTY is stored into that preset
channel memory.
PTY item
ENGLISH
GERMAN
SWEDISH
FRENCH
NEWS
NACHRICH
NYHETER
INFOS
News
AFFAIRS
AKTUELL
AKTUELLT
MAGAZINE
Today’s events
INFO
SERVICE
INFO
SERVICES
Information
SPORT
SPORT
SPORT
SPORT
Sports
EDUCATE
BILDUNG
UTBILDN
EDUCATIF
Education
DRAMA
HöR+LIT
TEATER
FICTION
Drama
CULTURE
KULTUR
KULTUR
CULTURE
Culture
SCIENCE
WISSEN
VETENSKP
SCIENCES
Science
VARIED
UNTERH
UNDERH
DIVERS
Variety
POP M
POP
POP
M POP
Pop music
ROCK M
ROCK
ROCK
M ROCK
Rock music
EASY M
U-MUSIK
LäTTLYSS
CHANSONS
Easy music
LIGHT M
L-MUSIK
L KLASS
M CL LëG
Light music
CLASSICS
E- MUSIK
KLASSISK
CLASSIQ
Classics
OTHER M
- - MUSIK
öVRIG M
AUTRE M
Other music
WEATHER
WETTER
VäDER
MëTëO
Weather
FINANCE
WIRTSCH
EKONOMI
ECONOMIE
Finance
CHILDREN
KINDER
FöR BARN
ENFANTS
For children
SOCIAL
SOZIALES
SOCIALT
SOCIëTë
Social
RELIGION
RELIGION
ANDLIGT
RELIGION
Religion
PHONE IN
ANRUF
TELEFON
FORUM
Phone in
TRAVEL
REISE
RESOR
VOYAGES
Travel
LEISURE
FREIZEIT
FRITID
LOISIRS
Leisure
JAZZ
JAZZ
JAZZ
JAZZ
Jazz
COUNTRY
COUNTRY
COUNTRY
COUNTRY
Country
NATION M
LANDES M
NATION M
CH PAYS
Nation music
OLDIES
OLDIES
OLDIES
RëTRO
Oldies
FOLK M
FOLKLORE
FOLKM
FOLKLORE
Folk music
DOCUMENT
FEATURE
DOKUMENT
DOCUMENT
Documentaries
18
DXZ538R
Contents
CD Operations
Emergency broadcast
Loading a CD
If an emergency broadcast is received, all the
function mode operations are stopped.
“ALARM” appears in the display and the emergency broadcast can be heard.
●Cancelling an emergency broadcast
If you press the [AF] button, emergency broadcast reception is cancelled.
1. Press the [OPEN] button to access the CD
SLOT behind the FLIP DOWN PANEL.
2. Insert a CD into the centre of the CD SLOT
with the label side facing up. The CD plays
automatically after loading.
Notes:
• Never insert foreign objects into the CD SLOT.
• If the CD is not inserted easily, there may be another CD in the mechanism or the unit may require service.
or
mark and
• Discs not bearing the
CD-ROMs cannot be played by this unit.
• Some CDs recorded in CD-R/CD-RW mode may
not be usable.
Loading 8 cm compact discs
Switching the PTY display language
You can select one of 4 languages (English,
German, Swedish or French) for the PTY displayed in the display.
∗ The factory default setting is “ENGLISH”.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button and select
“LANGUAGE”.
∗ No adapter is required to play an 8 cm CD.
∗ Insert the 8 cm CD into the centre of the insertion
slot.
3. Close the FLIP DOWN PANEL.
] button
3. Press the [
4. Turn the [ROTARY] knob clockwise or counterclockwise to select the desired language.
5. Press the [
] button
6. Press the [T] button to return to the previous
mode.
Volume setting of TA, emergency
broadcast (ALARM) and PTY
The volume for TA, ALARM and PTY interrupts
can be set during TA, ALARM or PTY interrupt.
∗ The factory default setting is “15”.
During a TA, ALARM or PTY interrupt, turn the
[ROTARY] knob clockwise or counterclockwise
to set the volume to the desired level (0 to 33).
∗ When the TA, ALARM or PTY interrupt ends, the
volume returns to the level it had before the interrupt.
CAUTION
Be careful not to catch your hand or fingers
while closing the FLIP DOWN PANEL.
Notes:
• If the FLIP DOWN PANEL does not open fully,
gently open with your hand.
• After loading a CD, always close the FLIP DOWN
PANEL.
Listening to a CD already inserted
Press the [FNC] button to select the CD mode.
Play starts automatically. If no CD is loaded in
the unit, “NO DISC” appears in the display.
Pausing play
1. Press the [
] button to pause play.
“PAUSE” appears in the display.
2. To resume CD play, press the [
again.
] button
DXZ538R
19
English
RDS oprations
CD Operations
English
Displaying CD titles
Fast-forward/fast-backward
This unit can display title data for CD-text CDs
and user titles input with this unit.
1. Press the [D] button to display the title.
2. Each time you press and hold the [D] button
for 1 second or longer, the title display
changes in the following order:
User title (disc) ➜ CD-text title (disc) ➜ Artist
name ➜ CD-text title (track) ➜ User title
(disc)...
Note:
• If the CD playing is not a CD-text CD or no user
title has been input, “NO TITLE” appears in the
display.
●Fast-forward
Press and hold the [d] button for 1 second or
longer.
●Fast-backward
Press and hold the [a] button for 1 second or
longer.
Top function
The top function resets the CD player to the first
track of the disc. Press the [BND] button to play
the first track (track No. 1) on the disc.
Scan play
Ejecting a CD
1. Press the [OPEN] button to open the FLIP
DOWN PANEL.
2. Press the [Q] to eject the CD. Take it out
from the ejected position.
3. Close the FLIP DOWN PANEL.
CAUTION
Be careful not to catch your hand or fingers
while closing the FLIP DOWN PANEL.
Notes:
• If the FLIP DOWN PANEL does not open fully,
gently open with your hand.
• After taking out the CD, be sure to close the FLIP
DOWN PANEL.
∗ If a CD (12 cm) is left in the ejected position for 15
seconds, the CD is automatically reloaded (Auto
reload).
∗ 8 cm CDs are not auto reloaded. Be sure to remove it when ejected.
Note:
• If you force a CD into before auto reloading, this
can damage the CD.
The scan play locates and plays the first 10 seconds of each track on a disc automatically. This
function continues on the disc until it is cancelled.
∗ The scan play is useful when you want to select a
desired track.
1. Press the [SCN] button to start scan play.
“SCN” lights in the display.
2. To cancel the scan play, press the [SCN] button again. “SCN” goes off from the display
and the current track continues to play.
Repeat play
The repeat play continuously plays the current
track. This function continues automatically until
it is cancelled.
1. Press the [RPT] button. “RPT” lights in the
display and the current track is repeated.
2. To cancel the repeat play, press the [RPT]
button again. “RPT” goes off from the display
and normal play resumes.
Random play
Selecting a track
●Track-up
1. Press the [d] button to move ahead to the
beginning of the next track.
2. Each time you press the [d] button, the
track advances ahead to the beginning of the
next track.
●Track-down
1. Press the [a] button to move back to the
beginning of the current track.
2. Press the [a] button twice to move to the
beginning of the previous track.
20
DXZ538R
The random play selects and plays individual
tracks on a disc in no particular order. This function continues automatically until it is cancelled.
1. Press the [RDM] button. “RDM” lights in the
display, an individual track is selected randomly and play begins.
2. To cancel the random play, press the [RDM]
button again. “RDM” goes off and normal
play resumes.
Operations Common to Each Mode
You can set the dimmer control “ON” or “OFF”.
∗ The factory default setting is “ON”.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button to select “DIMMER”.
3. Turn the [ROTARY] knob clockwise or counterclockwise and select “ON” or “OFF”.
4. Press the [T] button to return to the previous
mode.
Setting the car speaker output for
the cellular phone (Optional TEL002)
∗ The factory default setting is “RIGHT”.
∗ To output the telephone calls, set the cellular phone
interrupt to ON.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button to select “TEL-SP”.
3. Turn the [ROTARY] knob clockwise to select
“RIGHT” or counterclockwise to select “LEFT”.
● RIGHT:
Telephone calls can be heard on the front
right speaker connected to this unit.
● LEFT:
Telephone calls can be heard on the front left
speaker connected to this unit.
4. Press the [T] button to return to the previous
mode.
Cellular phone interrupt setting
If you connect this unit and your cellular phone
with a separately sold unit (TEL-002), you can listen to your telephone calls on your car speakers.
∗ The factory default setting is “OFF”.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button to select “TELSW”.
3. Turn the [ROTARY] knob clockwise or counterclockwise to select the setting. Each time
you turn the [ROTARY] knob, the setting
changes in the following order:
OFF ➜ ON ➜ MUTE ➜ OFF...
● OFF:
This unit continues normal operation even
when the cellular phone is used.
Note:
• If connecting a hands-free kit, please ensure the
setting is ON to receive the telephone audio
through the system.
● ON:
You can listen to your telephone calls from
the speakers connected to this unit.
∗ When listening to your calls on your car
speakers, you can adjust the volume by turning the [ROTARY] knob.
● MUTE:
The sound from this unit is muted during
telephone calls.
4. Press the [T] button to return to the previous
mode.
Turning the screen saver function
on or off
This unit is provided with the screen saver function which allows you to show various kinds of
patterns and characters in the Operation Status
indication area of the display in a random order.
You can turn on and off this function.
If the button operation is performed with the
screen saver function on, the operation display
corresponding to the button operation is shown
for about 30 seconds and the display returns to
the screen saver display.
∗ The factory default setting is “SS”.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button and select
“SCRN SVR”.
3. Press the [
] button and turn the
[ROTARY] knob clockwise or counterclockwise to select the setting. Each time you turn
the [ROTARY] knob, the setting changes in
the following order:
OFF ➜ SS ➜ MESSAGE.
4. Press the [
] button to store the setting.
5. Press the [T] button to return to the previous
mode.
∗ The following illustration presents one of the
patterns which are shown when the screen
saver function is turned on.
DXZ538R
21
English
Dimmer control
Operations Common to Each Mode
English
Entering titles
Setting the method for title scroll
Titles up to 8 characters long can be stored in
memory and displayed for CD, CD changer and
TV stations. The number of titles that can be entered for each mode are as follows.
Set how to scroll in CD-TEXT or MD.
Mode
CD mode
TV mode
Number of titles
50 titles
20 titles
CD changer mode
CDC655z connected
CDC655Tz connected
CDC1255z connected
Number of titles
60 titles
100 titles
50 titles
1. Press the [FNC] button to select the mode
you want to enter a title (CD, CD changer or
TV).
2. Select and play a CD in the CD changer or
tune in to a TV station for which you want to
enter the title.
3. Press the [D] button and display the sub.
4. Press the [T] button.
5. Press the [a] or [d] button to move the
cursor.
6. Press the [D] button to select a character.
Each time you press the [D] button, the character changes in the following order:
Capital letters ➜ Numbers ➜ Symbols ➜
Umlaut ➜ Capital letters...
7. Turn the [ROTARY] knob to select the desired character.
8. Repeat steps 5 to 7 to enter up to 8 characters for the title.
9. Press and hold the [
] button for 2 seconds or longer to store the title into memory
and cancel title input mode.
Clearing titles
1. Select and play a CD in the CD changer or
tune in to a TV station for which you want to
clear the title.
2. Press the [D] button and display the sub.
3. Press the [T] button and switch the display to
the title input display.
4. Press the [BND] button.
5. Press and hold the [
] button for 2 second or longer to clear the title and cancel title
input mode.
22
DXZ538R
∗ The factory default setting is “ON”.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button and select
“SCROLL”.
3. Turn the [ROTARY] knob clockwise or counterclockwise and select “ON” or “OFF”.
● ON:
To scroll automatically.
● OFF:
To scroll just 1 time when the title was
changed or the title key was pressed.
4. Press the [T] button to return to the previous
mode.
AUX function
This system has an external input jack so you
can listen to sounds and music from external
devices when connected to this unit.
Selecting the CONTRAST mode
∗ The factory default setting is “5”.
1. Press and hold the button [T] for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button to select
“CONTRAST”.
3. Turn the [ROTARY] knob to select from 1-8.
4. Press the [T] button to return to the previous
mode.
Setting LOW PASS FILTER
∗ The factory default setting is “LPF 120”.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button and select “SW
LPF”.
3. Turn the [ROTARY] knob clockwise or counterclockwise to select the setting. Each time
you turn the [ROTARY] knob, the setting
changes in the following order:
REAR ➜ LPF 50 ➜ LPF 80 ➜ LPF 120
4. Press the [T] button to return to the previous
mode.
Operations Common to Each Mode
Setting the button illumination
Message up to 30 characters long can be stored
in memory and displayed for any mode.
Press the [COLOR] button to select a color
type. Each time you press the [COLOR] button,
the type changes in the following order:
CLR SCAN ➜ RED ➜ MANDARIN ➜ ORANGE ➜ AMBER ➜ YELLOW ➜ Y-GREEN ➜
LIME ➜ GREEN ➜ D-GREEN ➜ USER ➜ CLR
SCAN…
●Setting CLR SCAN mode
As selecting “CLR SCAN”, the color automatically changes in the following order:
RED ➜ MANDARIN ➜ ORANGE ➜ AMBER ➜
YELLOW ➜ Y-GREEN ➜ LIME ➜ GREEN ➜
D-GREEN ➜ RED…
∗ The factory default setting is “WELCOME TO
CLARION”.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button and select
“INPUT”.
3. Press the [
] button.
4. Press the [a] or [d] button to move the
cursor.
5. Press the [D] button to select a character.
Each time you press the [D] button, the
character changes in the following orders:
Capital letters ➜ Numbers ➜ Symbols ➜
Umlaut ➜ Capital letters…
6. Turn the [ROTARY] knob to select the
desired character.
7. Repeat step 4 to 6 to enter up to 30
characters for message.
8. Press and hold the [
] button for 2
seconds or longer to store the message in
memory and cancel input message.
9. Press the [T] button to return to the previous
mode.
∗ The factory default setting is “CLR SCAN”.
∗ During change the color’s name is not appear.
∗ After 3 second the color changes to the other.
●Setting USER mode
The factory default setting is “R>8 G>3”.
As selecting “USER”, press and hold the
[COLOR] button 1 second or longer “R>8 G>3”
appears in the display.
1. Press the [a] or [d] button to move the
cursor.
2. Turn the [ROTARY] knob to select from 0 to
8.
3. Press and hold the [
] button for 2
seconds or longer to store the color in
memory and cancel setting mode.
DXZ538R
23
English
Entering MESSAGE INFORMATION
English
7. OPERATIONS OF ACCESSORIES
CD/MD Changer Operations
CD/MD changer functions
When an optional CD/MD changer is connected
through the CeNET cable, this unit controls all
CD/MD changer functions. This unit can control
a total of 2 changers.
Press the [FNC] button and select the CD(MD)
changer mode to start play. If 2 CD(MD) changers are connected, press the [FNC] button to select the CD(MD) changer for play.
∗ If “NO MAG” appears in the display, insert the magazine into the CD changer. “DISC CHK” appears in
the display while the player loads (checks) the
magazine.
∗ If “NO DISC” appears in the display, eject the magazine and insert discs into each slot. Then, reinsert
the magazine back into the CD changer.
∗ If “NO DISC” appears in the display, load MDs into
the MD changer.
Note:
• Some CDs recorded in CD-R/CD-RW mode may
not be usable.
CAUTION
CD-ROM discs cannot be played from every
CD changer, it’s depended on the model.
Pausing play
1. Press the [
] button to pause play.
“PAUSE” appears in the display.
2. To resume play, press the [
] button again.
Displaying CD titles
This unit can display title data for CD-text CDs
and user titles input with this unit.
∗ Title data for CD-text CDs can be displayed with
this unit only when it is connected to CDC655Tz.
●When connected to CDC655z or CDC1255z.
Press the [D] button to display the title.
●When connected to CDC655Tz
1. Press the [D] button to display the title.
2. Each time you press and hold the [D] button
for 1 second or longer, the title display
changes in the following order:
User title (disc) ➜ CD-text title (disc) ➜ Artist
name ➜ CD-text title (track) ➜ User title
(disc)…
24
DXZ538R
Notes:
• If the CD playing is not a CD-text CD or no user
title has been input, “NO TITLE” appears in the
display.
• If a CD-text CD is not input its disc title or a track
title, “NO TITLE” appears in the display.
Switching disc titles and track titles
(MD)
This unit can display disc titles and track titles
already entered on MDs.
∗ Titles cannot be entered for MDs with this unit.
1. Press [D] button to display the title. The disc
title or track title is displayed.
2. Each time you press and hold the [D] button
for 1 second or longer, the display toggles
between the disc title and the track title.
Note:
• If an MD is not input its disc title or a track title,
“NO TITLE” appears in the display.
Procedure to scroll a title
Set “SCROLL” to “ON” or “OFF”.
(The factory default setting is “ON”. Refer to the
subsection “Turning the screen saver function
on or off” in section “Operation common to
each mode”.)
●When set to “ON”
The title is automatically kept scrolling.
●When set to “OFF”
Press the [T] button to scroll the title.
Selecting a CD
[DN] or [UP] button correspond to a disc load in
the magazine.
Press the [DN] or [UP] button to select the
desired disc.
∗ If a CD is not loaded in a slot of magazine, “NO
DISC” appears in the display.
Selecting a MD
[DN] or [UP] button correspond to a MD load in
the MD changer. Press the [DN] or [UP] button
to select the desired disc.
∗ If a MD is not loaded in a slot of MD changer, “NO
DISC” appears in the display.
CD/MD Changer Operations
Repeat play
Repeat play continuously plays the current
track. This function continues automatically until
it is cancelled.
1. Press the [RPT] button. “RPT” lights in the
display and the current track is repeated.
2. To cancel repeat play, press the [RPT] button
again. “RPT” goes off from the display and
normal play resumes.
Fast-forward/fast-backward
●Fast-forward
Press and hold the [d] button for 1 second or
longer.
●Fast-backward
Press and hold the [a] button for 1 second or
longer.
Scan play
Scan play locates and plays the first 10 seconds
of each track on a disc automatically. This function continues on the disc until it is cancelled.
Disc repeat play
After all the tracks on the current disc have
been played, disc repeat play automatically replays the current disc over from the first track.
This function continues automatically until it is
cancelled.
1. Press and hold the [RPT] button for 1 second
or longer. “DISC” and “RPT” light in the display and disc repeat play starts.
2. To cancel disc repeat play, press and hold
the [RPT] button again. “DISC” and “RPT” go
off from the display and normal play resumes
on the current track.
Random play
1. Press the [SCN] button to start track scanning. “SCN” lights in the display.
2. To cancel the scan play, press the [SCN] button again. “SCN” goes off from the display
and the current track continues to play.
Random play selects and plays individual tracks
on the disc in no particular order. This function
continues automatically until it is cancelled.
1. Press the [RDM] button. “RDM” lights in the
display and random play begins.
2. To cancel random play, press the [RDM] button again. “RDM” goes off from the display
and normal play resumes.
Disc scan play
Disc random play
Disc scan play locates and plays the first 10
seconds of the first track on each disc in the
currently selected CD (MD) changer. This
function continues automatically until it is
cancelled.
The disc random play selects and plays individual tracks or discs automatically in no particular order. This function continues automatically until it is cancelled.
1. Press and hold the [RDM] button for 1
second or longer. “DISC” and “RDM” light in
the display and disc random play starts.
2. To cancel disc random play, press and hold
the [RDM] button again. “DISC” and “RDM”
go off from the display and normal play resumes from the current track.
∗ The scan play is useful when you want to select a
desired track.
∗ Disc scan play is useful when you want to select a
desired CD (MD).
1. Press and hold the [SCN] button for 1 second or longer. “DISC” and “SCN” light in the
display and disc scan play starts.
2. To cancel disc scan play, press the [SCN]
button again. “DISC” and “SCN” go off from
the display and the current track continues to
play.
DXZ538R
25
English
Selecting a track
●Track-up
1. Press the [d] button to move ahead to the
beginning of the next track.
2. Each time you press the [d] button, the
track advances ahead to the beginning of the
next track.
●Track-down
1. Press the [a] button to move back to the
beginning of the current track.
2. Press the [a] button twice to move to the
beginning of the previous track.
TV Operations
English
TV tuner functions
Manual tuning
When an optional TV tuner is connected through
the CeNET cable, this unit controls all TV tuner
functions. To watch TV requires a TV tuner and
monitor.
There are 2 ways available: Quick tuning and
step tuning.
When you are in the step tuning mode, the frequency changes one step at a time. In the quick
tuning mode, you can quickly tune the desired
frequency.
1. Press the [BND] button and select the desired band (TV1 or TV2).
Watching a TV
1. Press the [FNC] button and select the TV
mode.
2. Press the [BND] button to select the desired
TV band (TV1 or TV2). Each time the button
is pressed, the input selection toggles between TV1 and TV2.
3. Press the [a] or [d] button to tune in the
desired TV station.
Watching a video
The TV tuner has a VTR input terminal to which
1 external device can be connected. Connect a
12 V video cassette player (VCP) or video cassette recorder (VCR) to the TV tuner input terminal.
1. Press the [
] button to select VTR.
2. To return to the TV broadcast, press the
[
] button.
Tuning
There are 3 types of tuning mode available,
Seek tuning, manual tuning and preset tuning.
Seek tuning
1. Press the [BND] button and select the desired TV band (TV1 or TV2).
∗ If “MANU” is lit in the display, press and hold
the [BND] button for 1 second or longer.
“MANU” in the display goes off and seek tuning is now available.
2. Press the [a] or [d] button to automatically seek a station. Press the [d] button to
automatically tune up the frequency band to
the next available TV station; press the [a]
button to automatically tune down.
∗ If “MANU” is not lit in the display, press and
hold the [BND] button for 1 second or longer.
“MANU” lights in the display and manual tuning is now available.
2. Tune into a station.
●Quick tuning:
Press and hold the [a] or [d] button for 1
second or longer to tune in a station.
●Step tuning:
Press the [a] or [d] button to manually
tune in a station.
Recalling a preset station
A total of 12 TV stations can be stored (6-TV1
and 6-TV2). This allows you to select your favorite TV stations and store them in memory for
later recall.
1. Press the [BND] button and select the desired TV band (TV1 or TV2).
2. To recall a stored TV station, press the desired [DIRECT] button to select that station.
∗ Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store the current
station into preset memory.
Manual memory
1. Select the desired station with seek tuning,
manual tuning or preset tuning.
2. Press and hold one of [DIRECT] buttons for
2 seconds or longer to store the current station into preset memory.
Auto store
Auto store selects 6 TV stations automatically
and stores each one into preset memory.
If there are not 6 stations with good reception,
stations previously stored in memory remain
and only the strong stations are stored into
memory.
1. Press the [BND] button and select the desired TV band (TV1 or TV2).
26
DXZ538R
Digital Radio / DAB Operations
2. Press and hold the [P/A] button for 2 seconds or longer. The stations with good reception are stored automatically to the preset
channels.
DAB control function
When a CeNET cable is used to connect a DAB
(DAH913 or DAH9500z) (sold separetely), all
functions can be operated.
Preset scan
Listening to the DAB station
Preset scan allows the user to view each preset
position before it automatically advances to the
next preset. This function is useful for searching
for a desired TV station in memory.
1. Press the [P/A] button.
2. When the desired station is found, press the
[P/A] button again to remain tuned to that
station.
Note:
• Do not press and hold the [P/A] button for 2 seconds or longer. Doing so will trigger the auto store
function and start storing stations into memory.
1. Press the [FNC] button to select the DAB
mode.
2. When the unit receives a DAB station, the
display changes in the following order:
Frequency channel ➜ service label
Setting the TV area
When you select the TV area (TV reception
area), the TV tuner area setting changes.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button to select “TV
AREA”.
3. Press the [
] button.
4. Turn the [ROTARY] knob clockwise or counterclockwise to select the reception area.
5. Press the [
] button.
6. Press the [T] button to return to the previous
mode.
Switching displays
Press the [D] button to select the desired
display.
Each time you press the [D] button, the display
switches in the following order:
Main display
Sub display
Clock (CT) display
Setting the TV diver
You can change the reception setting for the TV
antenna connected to the TV tuner.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection display.
2. Press the [a] or [d] button to select “TV
DIVER”.
3. Turn the [ROTARY] knob clockwise to set to
“ON” or counterclockwise to set to “OFF”.
● ON:
Sets reception emphasizing the visual.
● OFF:
Sets the diver setting to OFF.
4. Press the [T] button to return to the previous
mode.
Main display
Note:
• The display shown in the normal reception mode
and the preset reception mode is the same when
a DAB station is received.
3. When the unit does not receive a DAB station, the display changes in the following order:
–Normal reception mode–
DXZ538R
27
English
TV Operations
Digital Radio / DAB Operations
English
–Preset reception mode–
Notes:
• The number of programmes and broadcasting
times depend on the DAB stations.
• When the strength of DAB signals is weak, audio
output is muted.
Seek tuning
1. Press the [FNC] button to select the DAB mode.
2. Press and hold the [a] or [d] button for 1
second or longer.
∗ “SEARCH” appears in the display.
3. “DAB” lights up in the display when the main
unit receives a DAB station.
* The main unit stops the seek tuning when it
cannot find a DAB station. The display returns
to the previous mode.
Manual tuning
1. Press the [FNC] button to select the DAB
mode.
2. Press and hold the [BND] button for 1
second or longer. “MANU” lights up in the
display.
3. Press the [a] or [d] button to select a station.
∗ If no operation is performed for more than 7
seconds, manual tuning is cancelled and the
display returns to the previous mode.
Switching programmes
1. Press the [FNC] button to receive a DAB station.
2. Press the [a] or [d] button to switch
programmes in the DAB station.
Note:
• The programme name may be the same depending on DAB programmes.
28
DXZ538R
Programme scan
This function scans through each receivable
programme in a DAB station being received for
10 seconds sequentially. This is useful when
you want to search for a desired programme.
1. Press the [FNC] button to receive a DAB station.
2. Perform the following operation depending
on the connected model.
Press the [P/A] button. “S-SCAN” lights up
and the unit starts scanning each
programme for 10 seconds sequentially.
Each time the main unit scans, the
programme name is shown in the display.
3. To stop programme scan when a desired
programme is tuned in.
Press the [P/A] button.
Manual memory
The main unit has a manual memory function
for DAB programmes. Up to 18 programmes (6
programmes each) can be preset in the preset
buttons.
[M1], [M2] and [M3]
1. Press the [FNC] button to select the DAB
mode.
2. Press the [BND] button to select any one
shown above.
3. Press the [a] or [d] button to select a desired programme.
4. Press and hold one of the [DIRECT] buttons
(1 to 6) for 2 seconds or longer to store the
programme.
Note:
• The interrupt programme (PTY or INFO) cannot
be written into a manual memory.
Recalling a preset programme
1. Press the [FNC] button to select the DAB mode.
2. Press the [BND] button. Each time you press
the [BND] button, the display changes in the
following order:
[M1] ➜ [M2] ➜ [M3] ➜ [M1]...
3. Press one of the [DIRECT] buttons to recall a
preset programme.
Note:
• Press and hold the [DIRECT] button for 2 seconds or longer to store the programme currently
being received. (Manual memory)
Digital Radio / DAB Operations
The AF function switches to a different frequency on the same network in order to maintain optimum reception.
∗ The factory default setting is “ON”
∗ If the reception of the current broadcast station deteriorates, “SEARCH” appears in the display and
the radio searches for the same programme on
another frequency.
∗ For details on “AF function”, refer to the section
“RDS operation” of each owner’s manual.
●Switching OFF the AF function
●Switching ON the AF function
●AF function between RDS and DAB
When the same programme is broadcast by
both RDS and DAB, and this function is ON, the
main unit switches to receiving the broadcast
with the better reception automatically.
TA (Traffic Announcement)
In the TA standby mode, when a traffic announcement broadcast starts, the traffic announcement
broadcast is received as top priority regardless of
the function mode. Traffic programme (TP) automatic tuning is also possible.
∗ This function can only be used when “TP” is lit in
the display. When “TP” is lit, this means that the
DAB or RDS broadcast station being received has
traffic announcement programmes.
∗ For details on “TA”, refer to the section “RDS operation” of each owner’s manual.
●Setting the TA standby mode
●Cancelling the TA standby mode
●Searching for a TP station
Notes:
• If a TP station is not received, the main unit stops
the search operation.
• “TP” may be lit in the display when a TP broadcast is transmitted from an RDS station. In this
case, press the [TA] button to perform TP seek
tuning. Press the [TA] button again to return to
the previous mode.
INFO (Announcement)
In the INFO standby mode, when the selected
announcement programme starts, the main unit
switches to the selected announcement
programme automatically.
●Setting the INFO standby mode
If you press and hold the [TA] button for 1 second or longer, “INFO” lights in the display and
the main unit is set into the INFO standby mode
until the selected announcement is broadcast.
When the selected announcement broadcast
starts, the announcement item appears in the
display. If you press and hold the [TA] button for
1 second or longer while the selected announcement broadcast is being received, the
selected announcement broadcast reception is
cancelled and the main unit goes into the INFO
standby mode.
●Cancelling INFO standby mode
To cancel the INFO standby mode, press and
hold the [TA] button for 1 second or longer.
●Information select
This is a function for selecting INFORMATION
ON or OFF in the Information interrupt mode.
You can set ON up to 6 information items.
You can select any of the 6 items below:
INFORMATION item
ENGLISH
Contents
TRAVEL
Transport flash
WARNING
Warning / Service
NEWS
News flash
WEATHER
Area weather flash
EVENT
Event announcement
SPECIAL
Special event
1. Perform the following operation depending
on the connected model.
Press and hold the [T] button for 1 second
or longer.
2. Press the [a] or [d] button to select “INFO
SEL”, then press the [
] button to enter
“INFO SEL” mode.
3. Press the [a] or [d] button to select an information item. You can select any of 6
items:
TRAVEL ➜ WARNING ➜ NEWS ➜
WEATHER ➜ EVENT ➜ SPECIAL ➜
TRAVEL ➜ ...
4. Perform the following operation depending
on the connected model.
Turn the [ROTARY] knob clockwise or
counterclock wise to set the information item
for ON or OFF.
5. Press the [T] button to return to the previous
display.
DXZ538R
29
English
AF function
Digital Radio / DAB Operations
English
PTY
This function enables you to listen to the selected programme type, irrespective of the function mode.
∗ One common PTY can be selected for DAB or RDS.
∗ Of DAB PTY and RDS PTY, the PTY which is received earlier takes priority over the other.
∗ PTY broadcasts are not yet available in all countries.
∗ In the INFO standby mode, INFO stations have priority over PTY stations.
∗ In the TA standby mode, TP stations have priority
over PTY stations.
∗ For details on “PTY”, refer to the section “RDS operation” of each owner’s manual.
●Setting the PTY standby mode
●Cancelling the PTY standby mode
●Cancelling a PTY interrupt broadcast
●Selecting PTY
●PTY seek
●PTY preset memory
Emergency broadcast
When an emergency broadcast is received, all
the function mode operations are stopped.
“ALARM” appears in the display and the emergency broadcast can be heard.
∗ For details on “Emergency broadcast”, refer to the
section “RDS operation” of each owner’s manual.
●Cancelling an emergency broadcast
Switching the PTY and INFO display
language
You can select one of 4 languages (English,
German, Swedish or French) for the PTY and
INFO shown in the display.
∗ The factory default setting is “ENGLISH”.
∗ For details on “Switching the PTY display language”, refer to the section “RDS operation” of
each owner’s manual.
30
DXZ538R
Volume setting of TA, INFO,
emergency broadcast (ALARM) and
PTY
The volume for TA, INFO, ALARM and PTY interrupts can be set during TA, INFO, ALARM
and PTY interrupt. Perform the following operation depending on the connected model.
∗ The factory default setting is “15”.
During a TA, INFO, ALARM or PTY interrupt,
turn the [ROTARY] knob clockwise or counterclockwise to set the volume to a desired level (0
to 33).
∗ When the TA, INFO, ALARM or PTY interrupt ends,
the volume returns to the level it had before the
interrupt.
Problem
Power does not turn
on.
(No sound is produced.)
Cause
Measure
Fuse is blown.
Replace with a fuse of the same amperage. If
the fuse blows again, consult your store of
purchase.
Incorrect wiring.
Consult your store of purchase.
Power antenna lead is shor- 1. Turn the unit off.
ted to ground or excessive
2. Remove all wires attached to the power
current is required for reantenna lead. Check each wire for a possible
mote-on the amplifiers or
short to ground using an ohm meter.
power antenna.
3. Turn the unit back on.
4. Reconnect each amplifier remote wire to the
power antenna lead one by one. If the
amplifiers turn off before all wires are
attached, use an external relay to provide
remote-on voltage (excessive current
required).
Nothing happens
when buttons are
pressed.
The microprocessor has
malfunctioned due to noise,
etc.
Turn off the power, then
press the [OPEN] button
and remove the DCP.
Press the reset button for
about 2 seconds with a
thin rod.
DCP or main unit connectors are dirty.
Wipe the dirt off with a soft cloth moistened with
cleaning alcohol.
Compact disc cannot
be loaded.
Another compact disc is already loaded.
Eject the compact disc before loading the new
one.
Sound skips or is noisy.
Compact disc is dirty.
Clean the compact disc with a soft cloth.
Compact disc is heavily
scratched or warped.
Replace with a compact disc with no scratches.
General
No sound output
when operating the
unit with amplifiers or
power antenna attached.
Display is not accurate.
CD
English
8. IN CASE OF DIFFICULTY
Sound is bad directly
after power is turned
on.
Reset button
Water droplets may form on Let dry for about 1 hour with the power on.
the internal lens when the
car is parked in a humid
place.
DXZ538R
31
If an error occurs, one of the following displays is displayed.
Take the measures described below to eliminate the problem.
Cause
Measure
ERROR 2
A CD is caught inside the CD deck and is
not ejected.
This is a failure of CD deck’s mechanism
and consult your store of purchase.
ERROR 3
A CD cannot be played due to scratches,
etc.
Replace with a non-scratched,
non-warped-disc.
ERROR 6
A CD is loaded upside-down inside the
CD deck and does not play.
Eject the disc then reload it properly.
ERROR 2
A CD inside the CD changer is not
loaded.
This is a failure of CD changer’s
mechanism and consult your store of
purchase.
ERROR 3
A CD inside the CD changer cannot be
played due to scratches, etc.
Replace with a non-scratched, nonwarped disc.
ERROR 6
A CD inside the CD changer cannot be
played because it is loaded upside-down.
Eject the disc then reload it properly.
ERROR H
Displayed when the temperature in the
MD changer is too high and playback has
been stopped automatically.
Lower the surrounding temperature and
wait for a while to cool off MD changer.
ERROR 2
An MD inside the MD changer is not
loaded.
This is a failure of MD changer’s
mechanism and consult your store of
purchase.
ERROR 3
An MD inside the MD changer cannot be
played due to scratches, etc.
Replace with a non-scratched, nonwarped disc.
ERROR 6
An MD inside the MD changer cannot be
played because it is loaded upside-down.
Eject the disc then reload it properly.
Displayed when a non-recorded MD is
loaded in the MD changer.
Load a pre-recorded MD in the MD
changer.
CD changer
CD
Error Display
MD changer
English
9. ERROR DISPLAYS
32
DXZ538R
Cause
Measure
ERROR 2
A DISC inside the DVD changer cannot be
played.
This is a failure of DVD mechanism and consult your store of purchase.
ERROR 3
A DISC cannot be played due to scratches,
etc.
Retry or replace with a non-scratched, nonwarped-disc.
ERROR 6
A DISC inside the DVD changer cannot be
played because it is loaded upside-down.
Eject the disc then reload it properly
ERROR P
Parental level error.
Set the correct Parental level.
ERROR R
Region code error.
Eject the disc and replace correct region
code disc.
If an error display other than the ones described above appears, press the reset button. If the problem
persists, turn off the power and consult your store of purchase.
DXZ538R
33
English
DVD changer
Error Display
English
10. SPECIFICATIONS
Français
Radio section
General
Tuning System: PLL synthesizer tuner
Receiving Frequencies:
FM : 87.5 to 108 MHz (0.05 MHz steps)
MW : 531 to 1602 kHz (9 kHz steps)
LW : 153 to 279 kHz (3 kHz steps)
Output Power: 4 ✕ 27 W (DIN 45324, +B=14.4V)
Power Supply Voltage:
14.4 V DC (10.8 to 15.6 V allowable),
negative ground
Power Consumption: Less than 15 A
Speaker Impedance: 4 Ω (4 to 8 Ω allowable)
Auto Antenna Rated Current: 500 mA or less
Weight:
Main unit: 1.3 kg
Dimensions:
Main unit :
178 (W) ✕ 50 (H) ✕ 157 (D) mm
CD player section
System: Compact disc digital audio system
Frequency Response: 10 Hz to 20 kHz (± 1 dB)
Signal to Noise Ratio: 100 dB (1 kHz) IHF-A
Dynamic Range: 95 dB (1 kHz)
Distortion: 0.01%
Note:
• Specifications and design are subject to change without notice for further improvement.
10. CARACTÉRISTIQUES TECHNIQUES
Section radio
Données générales
Système de syntonisation: Tuner à synthétiseur PLL
Fréquences de réception:
FM : 87,5 à 108 MHz (pas de 0,05 MHz)
PO : 531 à 1602 kHz (pas de 9 kHz)
GO : 153 à 279 kHz (pas de 3 kHz)
Puissance de sortie:
4 ✕ 27 W (DIN 45324, +B = 14,4 V)
Tension d’alimentation:
14,4 V CC (10,8 V à 15,6 V admissible),
masse négative
Consommation: Inférieure à 15 A
Impédance de haut-parleurs:
4 Ω (4 Ω à 8 W admissible)
Courant nominal d’antenne automatique:
500 mA ou moins
Poids:
Appareil principal: 1,3 kg
Dimensions:
Appareil principal:
178 (L) ✕ 50 (H) ✕ 157 (P) mm
Section lecteur de CD
Système:
Système audionumérique de disque compact
Réponse en fréquence: 10 Hz à 20 kHz (± 1 dB)
Rapport signal/bruit: 100 dB (1 kHz) IHF-A
Plage dynamique: 95 dB (1 kHz)
Distorsion: 0,01%
Remarque:
• La conception et les caractéristiques techniques sont sujettes à modification sans préavis pour des raisons
d’amélioration.
276
DXZ538R