advertisement
Application Note
Compiling and Running the TSP100 Series JavaPOS Sample
Introduction
This application note shows how to compile and run the JavaPOS sample provided on the TSP100 Installation CD. These directions were written using a TSP100ECO but are applicable for all models listed below.
Supported Printers: TSP100ECO, TSP100USB, TSP100PUSB, TSP100LAN, TSP100GT
Supported Interfaces: USB, PoweredUSB, Ethernet
Supported Environments: Windows 7 (32/64-bit), Windows Vista (32/64-bit), Windows XP
Star Tools Needed: futurePRNT Configuration Utility 5.2 or higher found on the Installation CD
Table of Contents
I. futurePRNT and Printer Installation
Page 1
II. Assigning a JavaPOS Device Name
Page 2
III. Running the JavaPOS Sample
……………………………………………………………….. Page 11
I. futurePRNT and Printer Installation
If these have not been installed on the system, it is necessary to install them using the Installation CD that shipped in the box with the TSP100 at this point in time. If the CD was misplaced, the contents can be downloaded again for free from the
Star Global Support Site .
For detailed installation instructions on futurePRNT and TSP100 installation, choose the printer’s connection interface below to open the relevant FAQ:
USB / PoweredUSB
Ethernet
04/2012, V1.0
Page 1
Application Note
II. Assigning a JavaPOS Device Name
1. Click the Windows Start button and navigate All Programs > StarMicronics > Star TSP100 > Configuration Utility.
2. Click “Star Line Mode” and then OK.
3. Click “JavaPOS” in the left menu bar.
04/2012, V1.0
Page 2
Application Note
4. Click “Create JavaPOS XML Registry File”.
5. Browse to the location of the JavaPOSExamples folder installed during futurePRNT’s installation. Then click “Save”.
Important : If the OS is 64-bit, be sure to not save the XML file in the 32-bit folder and likewise. This mismatch can result in print job failure when running the sample.
64-bit default location: C:\Program Files\StarMicronics\TSP100\Software\20110922\JavaPOSExamples
32-bit default location: C:\Program Files (x86)\StarMicronics\TSP100\Software\20110922\JavaPOSExamples
04/2012, V1.0
Page 3
Application Note
6. Click “Load JavaPOS XML Registry File”.
7. Browse to the location the XML file was saved in step 5. Highlight it and click “Open”.
04/2012, V1.0
Page 4
Application Note
8. Click the “Add New” button in the POSPrinter section.
9. Enter a new JavaPOS device name if desired and click “OK”.
10. Highlight the newly created device and click “Configure”.
04/2012, V1.0
Page 5
Application Note
11. Ensure “Do Checked Block Printing” is checked and click “Accept”.
12. Click “Apply Changes” in the lower right hand corner.
13. Highlight the device name and click “Check Health”.
14. The TSP100 prints a test page and the above message appears indicating the printer has successfully been set up as a
JavaPOS device.
04/2012, V1.0
Page 6
Application Note
III. Running the JavaPOS Sample
1. Browse to the location where the JavaPOS XML file was created in the JavaPOSExamples folder. Again, ensure the file’s location is located in the 64-bit Program Files directory if the OS is 64-bit, and likewise for a 32-bit OS. Right click the
“jpos.xml” file and click Edit.
2. Find the line that contains
JposEntry logicalName=
. Highlight the logical name between the quotation marks and copy.
3. Close the file.
04/2012, V1.0
Page 7
Application Note
4. In the JavaPOSExamples folder, open the “StarReceiptTest.java” folder.
5. Search for the words “printer.open”. Highlight “default” between the quotation marks and delete it.
04/2012, V1.0
Page 8
Application Note
6. In place of “default”, paste the logical name copied from the jpos.xml file. This must match exactly, unless communication cannot occur between the sample program and printer. If the logical device name changes or another printer model is added, this name needs to be modified in the sample program each time.
7. Open the Windows command prompt.
8. Change to the directory of the JavaPOSExamples folder.
9. Input “javac -classpath jpos113-controls.jar;jcl.jar StarReceiptTest.java” to compile the program.
(Received an error regarding javac? Check out IV Troubleshooting for a possible fix.)
04/2012, V1.0
Page 9
Application Note
10. Input “java -classpath .;starjavapos.jar;stario.jar;jpos113-controls.jar;jcl.jar;xercesimpl.jar;xml-apis.jar StarReceiptTest” to execute the program.
The TSP100 prints a sample receipt and the above screen confirms successful output.
Congratulations! You have successfully added the TSP100 as a JavaPOS device and ran the sample program.
04/2012, V1.0
Page 10
Application Note
IV. Troubleshooting
Issue: “Javac is not recognized as an internal or external command, operable program or batch file."
If this message occurs when attempting to compile the sample program from the command prompt, there are two things to check:
1. Ensure the latest version of JRE is installed. http://www.oracle.com/technetwork/java/javase/downloads/index.html
2. Ensure the location of the JDK bin file has been added to the System Variables.
3. Start Menu > Right click Computer > Select Properties
4. Click “Advanced system settings”.
04/2012, V1.0
Page 11
Application Note
5. Click the Advanced tab and then “Environment Variables”.
04/2012, V1.0
Page 12
Application Note
6. Highlight “Path” and click “Edit”.
7. Add the location of the JDK bin folder at the end of the list followed by a semicolon.
Important : Be sure to add the location to the end of the list only. Do not delete anything.
8. Click OK and then close the System Properties windows.
9. Compile from the command prompt once again.
04/2012, V1.0
Page 13
Application Note
Issue: “The device communications channel could not be opened."
If the above message occurs when running the sample program, confirm these points:
successfully configured as a JavaPOS device. If the test fails, check printer connection cables and ensure the printer is listed in the Devices and Printers (or Printers and Faxes) folder.
program was run from the 32-bit directory on a 64-bit machine.
04/2012, V1.0
Page 14
Star Micronics is a global leader in the manufacturing of small printers. We apply over 50 years of knowhow and innovation to provide elite printing solutions that are rich in stellar reliability and industry-respected features. Offering a diverse line of Thermal, Hybrid, Mobile, Kiosk and Impact Dot Matrix printers, we are obsessed with exceeding the demands of our valued customers every day.
We have a long history of implementations into Retail, Point of Sale, Hospitality, Restaurants and Kitchens, Kiosks and
Digital Signage, Gaming and Lottery, ATMs, Ticketing,
Labeling, Salons and Spas, Banking and Credit Unions,
Medical, Law Enforcement, Payment Processing, and more!
High Quality POS Receipts, Interactive Coupons with Triggers,
Logo Printing for Branding, Advanced Drivers for Windows,
Mac and Linux, Complete SDK Packages, Android, iOS,
Blackberry Printing Support, OPOS, JavaPOS, POS for .NET,
Eco-Friendly Paper and Power Savings with Reporting Utility,
ENERGY STAR, MSR Reading, futurePRNT, StarPRNT… How can Star help you fulfill the needs of your application?
Don’t just settle on hardware that won’t work as hard as you do. Demand everything from your printer. Demand a Star!
Star Micronics Worldwide
Star Micronics Co., Ltd.
536 Nanatsushinya
Shimizu-ku, Shizuoka 424-0066
Japan
+81-54-347-2163 http://www.star-m.jp/eng/index.htm
Star Micronics America, Inc.
1150 King Georges Post Road
Edison, NJ 08837
USA
1-800-782-7636
+1-732-623-5500 http://www.starmicronics.com
Star Micronics EMEA
Star House
Peregrine Business Park, Gomm Road
High Wycombe, Buckinghamshire HP13 7DL
UK
+44-(0)-1494-471111 http://www.star-emea.com
Star Micronics Southeast Asia Co., Ltd.
Room 2902C. 29th Fl. United Center Bldg.
323 Silom Road, Silom Bangrak, Bangkok 10500
Thailand
+66-2-631-1161 x 2 http://www.starmicronics.co.th/
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement