Outdoor Equipment - Alaska Industrial Hardware

Outdoor Equipment
OUTDOOR
EQUIPMENT
Page 500
Page 505
Page 507
Page 509
Page 512
Page 519
Page 520
Page 526
Page 528
ALASKA INDUSTRIAL
HARDWARE, INC.
ORDER ONLINE TODAY — SHIPS OUT TOMORROW!
www.
.com
AIH Order Desk
(907) 276-7201
1-800-478-7201
499
Outdoor Equipment
Chainsaws
Chainsaws
Model 555
X-TORQ® 4.3 HP engine produces high
torque at low RPMs with reduced fuel consumption and exhaust emissions. Air Injection™ system removes dirt and contaminants, extending filter life and saw performance.
Mfg.
Order
Cyl. Engine Bar
No.
No.
Disp. cc HP Lgth. In.
966 45 19-08 HUS55524
59.8
Chainsaws
Model 450
4.3
24
Chainsaw with powerful X-Torq® engine has
air injection centrifugal air cleaning system
that removes larger dust and debris particles
before reaching air filter. X-Torq® engine
technology reduces fuel consumption up to
20% and emissions up to 60%. Easy to start
combined start/stop switch, Smart Start®
and fuel pump make saw very easy to start.
LowVib system is designed to reduce vibration levels to operator, which lessens fatigue.
Mfg.
Order
Cyl. Engine Bar
No.
No.
Disp. cc HP Lgth. In.
966 90 67-38 HUS45018
Chainsaws
Model 240
Model 460
50.2
3.2
X-Torq® delivers lower fuel consumption and
reduced exhaust emission levels. Centrifugal
air system removes majority of debris before reaching air filter. Combined choke/stop
control. LowVib® to reduce vibrations levels.
Side chain tensioner.
Mfg.
No.
952 80 21-54 HUS240
Order
No.
965 03 12-24 HUS46024
Cyl. Engine
Bar
Disp. cc HP Lgth. In.
60.3
3.7
24
Order
No.
The Poulan Wild Thing is powered by a 2.0
cu. in., 40cc 2-cycle gas engine with SuperClean™ filter. Vertical cylinder design with
dual-counterweight crankshaft, gear-driven
automatic oiler, inertia chain brake, and fullwrap handle . Primer bulb allows easier starting. Includes carrying case.
Mfg.
No.
45.7
2.8
Order
No.
952802036 PLNP4018WT
Cyl. Engine Bar
Disp. cc HP Lgth. In.
966 95 53-38 HUS44518
16
Model P4018WT
Has Air Purge feature, which removes air
from carburetor and fuel system for easy
starting. Air Injection centrifugal air cleaning
system removes larger dust and debris particles before reaching the air filter, resulting in
reduced air filter cleanings and improved engine life. X-Torq® engine delivers lower fuel
consumption and reduced exhaust emission
levels. Easy combined start/stop switch and
fuel pump makes the saw very easy to start.
Side-mounted chain tensioner makes easier
access to the chain-tensioning device.
Mfg.
No.
Chainsaws
455 Rancher
2
Chainsaws
Model 445
Mfg.
No.
38.2
18
Chainsaws
X-TORQ 3.7 HP engine produces high torque
at low RPMs with reduced fuel consumption
and exhaust emissions. Air Injection™ system removes dirt and contaminants, extending filter life and saw performance. Designed
with side-access chain tensioning and comfort-grip handles. 24" bar length.
Order Cyl. Disp. Engine Bar
No.
cc
HP Lgth. In.
Bar
Lgth. In.
Chain
Type
18
91VJ
Chainsaws
Model P3416
18.
Chainsaws
Model 435
X-TORQ 3.4 HP engine produces high torque
at low RPMs with reduced fuel consumption
and exhaust emissions. Air Injection™ system removes dirt and contaminants, extending filter life and saw performance. Features
purge bulbs, decompression valve and combined choke/stop control for easy starting.
Mfg.
No.
Order
No.
965 03 02-98 HUS45520
500
Cyl. Engine
Bar
Disp. cc HP Lgth. In.
55.5
GHD Order Desk
(907) 279-6691
1-800-478-4393
3.4
20
Gas powered. Low Vib® system isolates
handle from engine to reduce vibration. Air
filtration removes majority of particles before
air reaches filter.
Mfg.
No.
Order
No.
Cyl. Engine Bar
Disp. cc HP Lgth. In.
965 16 75-01 HUS43516
40.9
ORDER ONLINE TODAY — SHIPS OUT TOMORROW!
www.ghdalaska.com
2.2
16
2.1 cu. in. engine features automatic chain
oiler, primer bulb for easy starting and SuperClean™ air filter system that helps provide
long air filter life, reduced fuel consumption
and increased power. Reduced kickback bar
and chain for safer operation. For light cutting jobs around the yard, with a cutting capacity of 32 in. diameter.
Mfg. No.
Order No. Engine Size Bar Lgth. In.
952802027
PLNP3416
2192 VIKING DRIVE
ANCHORAGE, AK 99501
2.1 cu. in./34cc
16
GENERAL HARDWARE
DISTRUBUTORS
Outdoor Equipment
2-Cycle Oils
Chainsaw Accessories
Fuel & Oil Tank Caps/Nuts
Chainsaws
Model P3314
HUS21283
HUS21281
Vertical cylinder design. Features dual-counterweight crankshaft, gear-driven automatic
oiler, inertia chain brake and full-wrap handle.
2.0 cu. in., 33cc engine with SuperClean™
filter. Primer bulb allows easier starting.
Mfg.
No.
Order
No.
Bar
Lgth. In.
Chain
Type
952802026
PLNP3314
14
91VJP
Electric Chainsaws
Model 400E
HUS21281: For models 340, 345, 350, 351,
353 and 346XP.
HUS21280: For models 51, 55, 55 Rancher,
136 and 141.
HUS21279: For models 338XPT, 340, 345,
350, 351, 353, 346XP, 357XP, 359, 365,
372XP, 385XP, 395XP, 3120XP, 455 Rancher, 570, and 575XP.
HUS21283: Fits all Husqvarna chainsaws
except Electric 316. Four nuts per package.
Mfg.No.
Order No.
Desc.
531 30 03-54
HUS21281
Bar and chain oil tank cap
531 30 03-55
HUS21280
531 30 03-56
HUS21279
531 30 03-82
HUS21283
XP Premium two-cycle engine oil meets high
performance engine requirements. Reduces
carbon build-up and prevents ring sticking.
Mfg. No.
Order No.
610 00 01-35
610 00 01-36
610 00 01-37
Bar and chain oil tank cap
2-Cycle
For use in all 2-cycle engines.
Smokeless formula. Measuring
cap assures proper mixture.
Mfg. No.
952-030207
3/8" chain pitch. Full wrap handle, inertiaactivated chain brake, and automatic oiler
to keep user safe. For additional safety,
the 400E is double insulated to help protect
against electric shock and can be plugged
into any standard 120-volt electrical outlet.
Mfg. No.
Order No.
PLN400E
Engine HP Bar Lgth. In.
4
18
2.6 Oz.
6.4 Oz.
12.8 Oz.
Engine Oils
Fuel tank cap
Replacement chainsaw nuts
Bar & Chain Oils
952801955
Size
HUS20100
HUS20101
HUS20102
Order No.
PLN04180
Size Oz.
16
Engine Oils
2-Cycle — Synthetic
Uses special tacking agents to keep oil on
bar and chain. Red cold-weather formula.
Mfg. No.
Order No.
Size
610 00 00-14
610 00 01-58
HUS20003
HUS20106
1 Qt.
1 Gal.
Electric Chainsaws
14"
Mfg.
No.
Order
No.
Size
Oz.
952-030227
PLN02309
19.6
Bar & Chain Oils
Grease Guns
Disposable
Features inline motor with ball bearing construction for smooth operation, chain brake
with trigger-mounted micro switch, directdrive transfer and visible oil level window.
Ergonomically designed rubberized grip
handles help reduce fatigue. Includes chain,
guide bar, chain cover and universal wrench.
15A @ 115V.
Mfg.
No.
Order
No.
UC3530A MAKUC3530A
Chain
Lgth.
Speed FPM In.
2600
19-3/8
ALASKA INDUSTRIAL
HARDWARE, INC.
Wt.
Lbs.
11
PLN04178
PLN04083
Provides protection for bars, chains and
sprockets.
Mfg. No.
952030203
952-030130
Order No.
PLN04178
PLN04083
Size
1 Qt.
1 Gal.
For delivering measured amounts of lubricant. Preloaded with factory-specified
grease.
Mfg. No.
26365
Order No.
Desc.
ORE26365
Disposable grease gun
ORDER ONLINE TODAY — SHIPS OUT TOMORROW!
www.
.com
AIH Order Desk
(907) 276-7201
1-800-478-7201
501
Outdoor Equipment
Chainsaw Chains & Bars
WHY IT IS IMPORTANT TO HAVE
A SHARP SAW CHAIN.
When the cutters on saw chain are sharpened to the correct angles, the cutters do the
work. When the angles are not correct,you
do the work by forcing the chain to cut.
This causes chain wear and eventual chain
breakage. The bar can also be damaged by
forcing a dull or damaged chain to cut. Forcing chain to cut leads to unsafe working conditions which can result in injury to yourself
or bystanders.
McCulloch® Models: Mac 110, Mac 120, Mac
130, Mac160S, Mac 3200, Mac 3210, Mac 3214,
Mac3216, Mac 3516, Mac 3816, Mac 3818AV.
Poulan® Models: PLN1514, PLN3516F.
Mfg.
No.
S49
Order
No.
Drive
Link Ct.
ORES49
49
Guide Bar
Lgth. In.
12/14
Homelite® Models: EL 12, EL 14.
McCulloch® Models: Eager Beaver 12ES, Eager
Beaver 14ES, Eager Beaver 16ES, Eager Beaver
250-14, Eager Beaver 300S-16.
Stihl® Models: 9, 10, 11, 12, 15, 17, 18, 19, 20,
21, 23, E10, E14, MS170, MS180C, MS180G,
MS191T, MS200T, MS210, MS210C.
Showing file in file holder, resting on
cutter top plate and depth gauge
Mfg.
No.
S50
Chain Codes
D
H
S
L
Chain Types:
72V
33SL
91VG
35SL
Pitch:
3/8"
.325"
3/8"
.325"
Gauge:
.050"
.050"
.050"
.063"
File Size:
7/32"
5/32"
5/32"
5/32"
ID Link
Yes
Yes
Yes
Yes
ATTENTION:
The OREGON® chain shown in this selector chart is low-kickback chain. It meets the
reduced kickback performance requirements
of ANSI B175.1 when tested on a representative sample of chainsaws. These chains
significantly reduce the hazard of chainsaw
kickback while maintaining high cutting performance. All cutting chain can kick back,
which may result in severe personal injury to the saw operator or bystanders.
Operate your saw safely. Read your saw
operator’s manual, OREGON® chain maintenance booklet and follow all instructions.
Order
No.
Drive
Link Ct.
ORES50
50
Guide Bar
Lgth. In.
14
Husqvarna® Models: 36*, 41*, 136*, 137*, 141*,
142*, 235E, 240E, 250PS, 334T, 338XPT.
* - Requires a 3/8" low profile sprocket.
Poulan® Models: 220, 225, 230, 260, 400E,
2000, 2050, 2150, 2175, 2375, 3314 Woodshark,
3416, 3516, 3516AVX, 21000, Micro 25 XXV Series, S25, Woodshark, Woodsman 2000.
Mfg.
No.
S52
27856
Order
No.
ORES52
ORE27856
Drive Guide Bar
Link Ct. Lgth. In.
52
52
14
14
Desc.
Chain
Bar/Chain
combo
Homelite® Models: 180 Series, 240, 240CC,
240SL, Bandit, EL 16, Electric 200, Little Red,
LX16C, Super 2, Super 2CC, VI Super 2, XEL-14
Electric, XL, XL 2, XL-10, XL-14, XL-16, XL-12,
XL2CC.
Husqvarna® Models: 32, 38.
Mfg.
No.
S53
Order
No.
ORES53
Drive Guide Bar
Link Ct. Lgth. In.
53
14
Homelite® Models: 190, 200, 240, 180 Series,
245, Super 2, Super 2CC, VI Super 2, Xel-14, XELElectric, XL, Xl 2, XL-10, XL-14, XL-16, XL2CC.
Mfg.
No.
Order No.
S59
ORES59
Drive Guide Bar
Link Ct. Lgth. In.
59
16
Stil® Models: 009, 009L, 011, 012, 015, 017,
018, 019, 020, 021, 023, E10, E14, E140, MS170,
MS171, MS180, MS181, MS191T, MS192,
MS200, MS200T, MS210, MS210C, MS211,
MS230, MSE140, MSE180.
502
GHD Order Desk
(907) 279-6691
1-800-478-4393
Mfg.
No.
Order
No.
Drive
Link Ct.
Guide Bar
Lgth. In.
S55
ORES55
55
16
ORDER ONLINE TODAY — SHIPS OUT TOMORROW!
www.ghdalaska.com
Homelite® Models: EL12EL, 14EL16, 3300,
3314, 3316, 3318, 3350, 3550, 3800, 3850,
20AV, 23AV, PS33, Ranger, UT10514, UT43100,
UT10516, UT43120, UT10517.
Husqvarna® Models: 34, 35, 37, 235E, 335,
334T, 340E, 350E, 353 NASCAR, 445E, 23, 36,
136, 137, 141, 142, 243, EL 16, EL316.
Poulan®/Poulan Pro® Models: 180, 190, 200,
205, 210, 220, 221, 222, 225, 235, 236, 240, 250,
255*, 260, 262, 400E, 1220, 1420, 1425, 1630,
1625, 1634, 1775, 1800, 1838, 1900, 1950, 1975,
2000, 2025, 2050, 2055, 2075, 2100, 2150, 215,
2160, 2175, 2200, 2250, 2300, 2350, 2375, 2400,
2450, 2500, 2550, 2555, 2600, 3314, 3316, 3416,
3516, 3816, 3818, 4018.
Drive Guide
Link
Bar
Ct. Lgth. In.
Mfg.
No.
Order
No.
S56
27857
ORES56
ORE27857
56
56
16
16
Desc.
Chain
Bar/Chain
combo
Homelite® Models: 330, 350, 360, 410, 450, 460,
540, 550, 650, 750, 922, 923, 925, C Series, Super XL, Super XLAO, XL 12, XL 76.
Husqvarna® Models: 55 Rancher, 61, 162, 257,
261, 262, 268, 272, 357XP, 357XPG, 359, 362XP,
365, 371, 385XP, 395XP, 395XPG, 395XPW, 455
Rancher, 460, 570, 575XP.
Poulan® Models: 203, 245, 306, 360, 361, 375,
395, 400, 415, 425, 445, 450, 475, 505, 3400,
3700, 3800, 3900, 4000, 4400, 4900, 5200, 5400,
5500, 6700.
Stihl® Models: 024, 026, 028, 029, 030, 031,
032, 034, 034WB, 036, 038, 039, E15, E20,
E180C, MS260, MS290, MS310, MS341, MS360,
MS361, MS390, MSE220.
Mfg.
No.
Order
No.
Drive Guide Bar
Link Ct. Lgth. In.
D60
ORED60
27853 ORE27853
60
60
16
16
Desc.
Chain
Bar/Chain
combo
Stil® Models: 24, 26,026P, 28, 29, 30, 31, 32, 34,
36, MS260, MS270, MS280, MS310.
Mfg.
No.
Order
No.
Drive
Link Ct.
Guide Bar
Lgth. In.
L67
OREL67
67
16
Husqvarna® Models: 36*, 41*, 136*, 137*,
141*, 142*, 235E, 240E, 250PS, 334T, 335XPT,
338XPT, T435.
* - Requires a 3/8" low profile sprocket.
Poulan® Models: 2175, 2300, 2375, WildThing.
Mfg.
No.
Order
No.
S62
ORES62
39272 ORE39272
Drive Guide Bar
Link Ct. Lgth. In.
62
62
18
18
Desc.
Chain
Bar/Chain
combo
Homelite® Models: Super XLAO, XL 12.
McCulloch® Models: Eager BEaver 3.4, Eager
Beaver 3.7, Mac 10-10, Pro Mac 5700, Pro Mac
610, Pro Mac 700.
Poulan® Models: 203, 245, 306, 360, 361, 375,
395, 400, 450, 3400, 3700, 3800, 3900, 4000,
4400, 4900, 5200, 5400, 5500, 6700.
Stihl® Models: 034, 036, 038, 039, MS 360 MS
361, MS 390, MS 440, MS 460, MS 660, MSE
220.
Mfg.
No.
Order
No.
Drive Link
Ct.
Guide Bar
Lgth. In.
D66
ORED66
66
18
2192 VIKING DRIVE
ANCHORAGE, AK 99501
GENERAL HARDWARE
DISTRUBUTORS
Outdoor Equipment
Stihl® Models: 24, 26, 28, 29, 30, 31, 32, 34, 36,
026P, MS260, MS270, MS280, MS310.
Mfg.
No.
L74
Order
No.
Drive
Link Ct.
OREL74
Guide Bar
Lgth. In.
74
18
Chainsaw Chains & Bars
Homelite® Models: Super XL, Super XLAO, XL
12.
McCulloch® Models: Mac 1-10, Mac 10-10, Mac
3-10, Mac 4-10, Mac 5-10, Pro Mac 610, Super
Pro 80.
Poulan® Models: 203, 245, 306, 330, 360, 361,
365, 375, 380, 395, 400, 450, 3350, 3400, 3450,
3500 3600, 3650, 3700, 3750, 3800, 3900, 4000,
4200, 4400, 4900, 5200, 5400, 5500, 6700, 6900,
7700, 8500.
Mfg.
No.
D70
27852
Order
No.
Drive Guide Bar
Link Ct. Lgth. In.
ORED70
ORE27852
70
70
20
20
Desc.
Chain
Bar/Chain
combo
Husqvarna® Models: 55 Rancher, 61, 65, 257,
261, 262, 266, 268, 272, 357XP, 359, 365, 371,
385XP, 395XP, 395XPG, 395XPW, 455 Rancher,
460, 570, 575XP.
Stihl® Models: 024, 026, 026P, 028, 029, 031,
032, 034, 036, MS341, MS360, MS361, MS390,
MS440, MS460, MS660, MS260, MS290, MS310,
MSE220.
Mfg.
No.
D72
Order
No.
Drive
Link Ct.
ORED72
Guide Bar
Lgth. In.
72
20
Homelite® Models: Super 240.
Poulan® Models: 285, 295, 305, 310, 315, 335,
336, 2700, 2750, 2775, 2800, 2900, 3000, 3050,
3100, 3300, 3065A, 4620, 4620AV, 4620AVX,
Predator.
Mfg.
No.
H78
Order
No.
OREH78
Drive Guide Bar
Link Ct. Lgth. In.
37977 OER37977
78
20
78
20
Desc.
Chain
Bar/Chain
combo
Stihl® Models: 24, 26, 28, 29, 30, 31, 32, 34, 36,
026P, MS260, MS270, MS280, MS310.
Mfg.
No.
Order
No.
L81
OREL81
105671 ORE105671
Drive Guide Bar
Link Ct. Lgth. In.
81
81
20
20
Desc.
Chain
Bar/Chain
combo
Safety Headgear
Replacement
Lumberjack™
Chains
Bars
Models: 136, 137, 141, 142, 235e, 240e, 316e.
Mfg.
No.
Order
No.
531 30-04-46 HUS21908
531 30 04-45 HUS21919
56
–
16
16
Chain
Bar
Models: 41, 45, 49, 51, 55, 340, 345, 346 XP,
350, 351, 353, 435, 440, 440e, 445, 450, 450e.
Mfg.
No.
Order
No.
Models: 137, 142.
Order
No.
3MS90564
23
66
–
16
16
Chain
Bar
Chainsaw Chaps
Drive Guide Bar
Link Ct. Lgth. In. Desc.
531 30 81-47 HUS50407
531 30 81-50 HUS50408
56
–
16
16
Chain
Bar
Models: 41, 45, 49, 51, 55, 340, 345, 346 XP,
350, 351, 353, 435, 440, 440e, 450, 450e.
Mfg.
No.
Order
No.
Drive Guide Bar
Link Ct. Lgth. In. Desc.
531 30 04-39 HUS21910
531 30 04-38 HUS21921
72
–
18
18
Chain
Bar
Models: 55 Rancher, 455 Rancher, 257, 261, 262
XP, 357 XP, 359, 460, 460 Rancher.
Mfg.
No.
Order
No.
Drive Guide Bar
Link Ct. Lgth. In. Desc.
531 30 04-41 HUS21912
531 30 04-40 HUS21923
72
–
18
18
Constructed from durable nylon material;
jams chainsaw on contact. Features oil- and
water-resistant outer layer, quick-release
buckles and adjustable waistband. UL approved.
Mfg. No.
531 30 95-64/65
Chain
Bar
Order No.
Waist Adjust. In.
HUS20822
30 – 48
Screnches
Models: 346 XP, 350, 351, 353, 450.
Mfg.
No.
Order
No.
Drive Guide Bar
Link Ct. Lgth. In. Desc.
531 30 96-80 HUS50544
508-92-61-80 HUS21924
80
–
20
20
Chain
Bar
Models: 288 XP, 298, 357 XP, 359, 362 XP, 365,
371, 372 XP, 380, 385 XP, 394 XP, 390 XP, 395
XP, 2100, 2101, 3120 XP, 455 Rancher, 460, 460
Rancher, 570, 575 XP, 576 XP.
Mfg.
No.
Order
No.
84
–
24
24
Mfg. No.
Order No.
531 30 03-85
Desc.
HUS21284
Chainsaw scrench
Order
No.
Drive Guide Bar
Link Ct. Lgth. In. Desc.
531 30 06-24 HUS21934
531 30 74-46 HUS21373
84
–
24
24
Chainsaw Tools
Chain
Bar
Models: 257, 261, 262 XP, 266, 268, 272, 281,
285, 288 XP, 298, 357 XP, 359, 362 XP, 365,
371, 372 XP, 380, 385 XP, 394 XP, 395 XP, 455
Rancher, 460, 460 Rancher, 570, 575 XP, 576 XP,
100, 2101, 3120 XP.
Mfg.
No.
Fits all Husqvarna chainsaws. 2-in-1 tool for
bar removal and chain tensioning. Features
two socket sizes on the barrel and a flat
screwdriver blade on the shank.
Drive Guide Bar
Link Ct. Lgth. In. Desc.
531 30 05-56 HUS21917
531 30 05-89 HUS21929
ALASKA INDUSTRIAL
HARDWARE, INC.
90564
Drive Guide Bar
Link Ct. Lgth. In. Desc.
531 30 04-37 HUS21909
531 30 04-36 HUS21920
Mfg.
No.
Designed for logging and chainsaw operations. Features sealed visor to prevent sawdust from falling between screen and hat.
Includes hard hat, metal mesh visor and capmounted hearing protectors.
Mfg. No.
Order No.
NRR Rating dB
Drive Guide Bar
Link Ct. Lgth. In. Desc.
Chain
Bar
Scrench
Features two socket sizes on barrel, flat
screwdriver blade on shank.
Mfg.
Order
Barrel
Socket
No.
No.
Size In.
Sizes mm
512959
ORE512959
ORDER ONLINE TODAY — SHIPS OUT TOMORROW!
www.
.com
2
AIH Order Desk
(907) 276-7201
1-800-478-7201
13, 19
503
Outdoor Equipment
Chainsaw Scabbards
Chainsaw Sharpening Stones
Chainsaw Sharpeners
Electric
Precision ground for quick, easy sharpening.
Two stones per package.
Covers bar and chain; protects against damage. Impact-resistant plastic construction.
Mfg. No.
Order No.
For Saw Lgth. In.
501 83 44-11
HUS22027
18 – 22
Chainsaw Bar Covers
Saw Saver™
Plastic construction. Protects chain and bar
from damage.
Mfg. No.
Order No.
For Bar Lgth. In.
29675
ORE29675
20
Saw Wedges
Mfg. No.
453
454
455
Order
No.
RPM
Arbor
Dia. In.
Wheel
Dim. In.
ECSS
GLO00105
4200
7/8
4-1/4 x 1/8
Mfg. No.
ECSS-GW
Accessories
Order No.
GLO00106
Dia. In.
DRM453
DRM454
DRM455
5/32
3/16
7/32
Chainsaw Sharpeners
Mounts to bench, wall or vise. 120V, 60 Hz.
Mfg.
No.
Order No.
Sure Sharp®
Desc.
Replacement griding wheel
Provides accurate sharpening of chains.
Calibrated adjustments.
Mfg. No.
Order No.
Desc.
23820
ORE23820
Chainsaw sharpener
Chainsaw Files
Chainsaw Sharpener Kits
Consistent tooth height removes metal
quickly and smoothly. Carded. 2 per pack.
Mfg. No.
23577
23727
23575
For controlling direction of tree fall. Prevents
saw from binding in cut.
Note: Not for splitting.
Mfg. No.
Order No.
Desc.
23565
ORE23565
Saw wedge
Size In.
ORE23577
ORE23727
ORE23575
5/32
3/16
7/32
Chainsaw Files
Series CSK. Sharpening kit. Threaded
shank for use in standard and specialty
sharpening devices. Plugs into cigarette
lighter or battery terminals.
Mfg.No.
11002/CSK
Chainsaw Cases
Order No.
Order No.
EZL11002
Includes File Size In.
5/32, 3/16, 7/32
Chainsaw Sharpeners
With Guide
Guide holds file and indicates sharpening
angle. File installs with spring clips. Carded.
Mfg. No.
Order No.
Size In.
25894
25896
25892
ORE25894
ORE25896
ORE25892
5/32
3/16
7/32
Chainsaw Files
Straight Tang
Series CSG. Diamond file with precision
guide. For use in most sharpening devices
including household drills. 1/8" shank.
High-impact plastic.
Mfg. No.
Order No.
100 00 01-07 HUS50152
504
Fits
Model 136, 141, 340, 345,
350, 346XP, 351, 51, 55, 55
Rancher, 257, 261, 362XP,
357XP, 359
GHD Order Desk
(907) 279-6691
1-800-478-4393
Mfg. No.
70052/CSG 5/32
70032/CSG 3/16
70072/CSG 7/32
Order No.
EZL70052
EZL70032
EZL70072
Size In. Pkg. Qty.
ORDER ONLINE TODAY — SHIPS OUT TOMORROW!
www.ghdalaska.com
5/32
3/16
7/32
1
1
1
Round, spiral-cut shaft. Straight tang. Spiral
cut removes material while filing.
Mfg. No.
02145N
2192 VIKING DRIVE
ANCHORAGE, AK 99501
Order No.
NIC02145
Lgth. In.
6
Dia. In.
5/32
GENERAL HARDWARE
DISTRUBUTORS
Outdoor Equipment
Brush Cutters
Gas-Powered Trimmers
323R
Trimmer Lines
Super Blue™
Brush cutter powered by a 33cc 2-cycle engine with the SureFire™ starting system. 8"
weed blade cuts debris up to 1" thick. Features a J handle and straight/ split shaft.
Mfg.
Order
Cut
Engine Line
No.
No.
Path In.
cc
Dia. In.
Compact design with adjustable handlebar
and anti-vibration system for reduced fatigue.
Mfg.No.
Order No. Engine cc
968 76 72-14
HUS323R
HP
24.5
1.2
dBA
952 711 951 PLNPP333
17
33
.095
Gas-Powered Trimmers
FeatherLite XT®
90
Long-lasting rounded blue line.
Mfg.
Order
Dia.
No.
No.
In.
Trimmers
Gas-Powered — 128L
Lightweight design features tool-less adjustable handle and Smart Start® recoil starting
system with always-on switch and air purge.
Mfg.
No.
Order
No.
Engine
cc
HP
Line
Dia. In.
952 71 19-46
HUS128L
28
1.1
.095
Lightweight. Features Quick-Snap® spool for
fast replacement. Curved 45" shaft. 7.3 lbs.
Mfg.
Order
Cut
Engine Line
No.
No.
Path In.
cc
Dia. In.
952-711930 PLNP1500
17
25
.065
Clamshell Package
ORE36896
.065
ORE36897
.080
ORE36898
.095
1/2 lb. Donut Package
ORE36901
.065
ORE36902
.080
ORE36903
.095
1 lb. Donut Package
ORE37584
.065
ORE37585
.080
ORE37595
.095
ORE37598
.105
36896
36897
36898
36901
36902
36903
37584
37585
37595
37598
Electric Trimmers
Trimmers
Features 3.75 Amp engine and straight shaft.
Backpack Blowers
Gas-Powered Blowers
28
1.1
Order No.
HUS130BT
CFM
430
Mfg.No.
Order No.
WE-EL-15TNE
PLNRTE115C
Cut Width In.
12
For cutting small trees. Compatible with series 323, 324, 326, 232, 235, 343 and 395
trimmers.
Mfg.
No.
Order
No.
Blade
Dia. In.
No.
Teeth
508 90 45-01
HUSMAXI
8
26
Brush Trimmer Blades
Featherlite®
Lightweight blower ideal for homeowner and
professional use to work and maintain large
areas. Features trigger throttle, air purge for
easy start and high air blowing capacity.
Mfg. No.
Db
69.3
ALASKA INDUSTRIAL
HARDWARE, INC.
600
400
260
235
.080
25.4 cc
965 10 22-04
300
200
130
Woodcutting
Lightweight trimmer with ergonomic curved
shaft. Features Smart Start® engine, auto return stop switch for easier starting, air purge
and E-TECH® II exhaust emissions reducer.
Comes with easy loading T-25 bump trimmer
head. Handle adjustment can be completed
without tools.
Mfg.
Order
Engine
Line
No.
No.
cc
HP Dia. In.
HUS128C
50
50
40
Trimmer Blades
Gas-Powered — 128C
952 71 19-47
Lgth.
Ft.
Wt. Lbs.
18
Two-speed control. Reduced vibration handle. Total weight 7 lbs.
Air
Mfg.
Order Engine
Speed
No.
No.
cc CFM MPH dB
952-711486 PLNFL1500
18
300
150
68
Note: Not for use with curved drive shaft.
Mfg. No.
Order No.
Dia. In.
RPM
02325
PLN02325
8
11,500
ORDER ONLINE TODAY — SHIPS OUT TOMORROW!
www.
.com
AIH Order Desk
(907) 276-7201
1-800-478-7201
505
Outdoor Equipment
Gas-Powered String Trimmers
Brush Cutters
Wheeled
Trimmer Heads
Bump & Feed
Features three stainless-steel blades for cutting tall grass, large weeds, small saplings
and bushes. Use with commercial-grade
trimmers 25cc or larger.
Mfg. No.
4680
Order No.
Desc.
GGR4680
Extra heavy-duty brush cutter
Fits most straight shaft gas trimmers. No
tools needed to install.
Mfg. No.
Brush Cutter Blades
3630
Order No.
For Line Dia. In.
GGR3630
.095 – .105
Offers 625 ft.-lbs. of torque and has a 190cc
4-cycle gas powered engine. 12" rear plastic
tires. Push drive system with a rotating trimmer line. Uses .155-diameter trimmer line.
Mfg.
Order
Cutting
Cutting
No.
No.
Width In.
Ht. In.
961 73 00-01
Trimmer Heads
HUS625HWT
22
1.6 – 3
Precut Trimmer Lines
T35
Contains three stainless steel replacement
blades
Mfg. No. Order No.
4690
GGR4690
Desc.
Replacement blades for No. 4650
Trimmer Lines
Lightweight head holds up to 28 ft. of trimmer
line. Split spool design prevents tangling and
welding. Fits trimmers up to 35 cc.
Mfg. No.
Order No.
Desc.
537 38 81-01
4-Line System
T35 trimmer heads
HUS21276
Replacement precut trimmer line fits models
PPB300E, PP325, and WT3100 walk behind
trimmers. 12 per package.
Trimmer Lines
Weedeater® — Tap-N-Go
Mfg. No.
952-711635
5600
Order No.
Desc.
GGR5600
4-line trimmer
Trimmer Lines
Replacement
PLN711635
Size In. Dia. x Lgth.
.115 X 18
Trimmer Lines
Weedeater®
Fits 99% of gas-powered weed trimmers. No
tools needed for installation. Four fixed lines,
no tangles or spool loading.
Mfg. No.
Order No.
.065" diameter line packaged on spool.
Mfg.
Order Lgth.
For Trimmer
No.
No.
Ft.
Series
952-701663
PLN02204
30
SG, TE, XT & RT
Trimmer Lines
Replacement pre-cut line designed for Grass Gator Load n’
Cut trimmer head.
Mfg. No.
8020
506
Order No.
GGR8020
For Trimmer
No. 8010 head
GHD Order Desk
(907) 279-6691
1-800-478-4393
Pkg. Qty.
20
For XT®600 series trimmers.
Order
Line
Mfg.
No.
No.
Dia. In
952-711551
PLN02252
ORDER ONLINE TODAY — SHIPS OUT TOMORROW!
www.ghdalaska.com
.080
Line
Lgth. In.
240
6-sided design for use with WT600 and
625HWT wheeled trimmer.
Mfg. No.
952-711577
2192 VIKING DRIVE
ANCHORAGE, AK 99501
Order No.
PLN02323
Dia.In.
.155
Lgth.In.
21.5
GENERAL HARDWARE
DISTRUBUTORS
Outdoor Equipment
Lawnmowers
Self-propelled
Post Hole Diggers
Earth Augers
Dig-EZ
Two Person
Designed with 3-in-1 mowing deck for sidedischarge, bagging or mulching. Features
5.5 HP Kohler® engine, AutoWalk variable drive
system and 2.5 bushel dustless rear bagger.
Electric start
Mfg. No.
Order No.
HP Blade Dia. In.
961 43 00-61 HUSXT722FE
5.5
21
3.8HP Tecumseh engine. Solid steel, heattreated alloy gears. 3" heavy duty contrifugal
clutch.
Mfg. No.
Lawnmowers
9800B
Self-propelled
Order No.
RPM
ESK9800
121
Tempered blades are pointed for maximum
soil penetration with less effort. Fiberglass
handle provides ultimate core strength with
stopper to prevents knuckle collision.
Mfg.No.
Order No.
Desc.
1715100
AMS17151
Dig-EZ post hole digger
Earth Auger Power-heads
Earthquake®
Honda GCV 160-Series easy-start autochoke engine. Front wheel drive for optimum
traction and high rear wheel for greater maneuverability. Convenient bagger and computer aided deck design with 3-in-1 blade.
Dual trigger and auto walk. 4-position height
adjustment.
Mfg.
Order
Engine
Cut
No.
No.
CC
Width In.
961-45-00-06
HUSHU700F
160
22
Post Hole Diggers
2-cycle Viper® engine, anti-vibration foamgrip handlebars, easy grip fingertip throttle
control, see-through gas tank for monitoring,
quick start primer and steel muffler guard.
Mfg.
No.
Order
No.
Engine
cc
Gear
Ratio
RPM
E43
ESKE43
43
30:1
250
4-ft. fiberglass handle with vinyl grip. Sharpened carbon steel blades.
Mfg.
Order
Handle
Point
No.
No.
Color
Spread In.
Atlas
DG-100FG
SEYDG100FG
Yellow
6
Red
6.25
Red
7.25
Hercules
DG-11FG
SEYDG11FG
Perfection
DG-12FG
SEYDG12FG
Earth Auger Drills
Lawnmower Blades
Universal
Post Hole Diggers
Homeowners’
Holes spaces 2-5/16" center to center.
Mfg. No.
490-100-0053
536055
536056
Order No.
ORE94199
ORE536055
ORE536056
Lgth. In. Width. In.
20
21
22
2
2
2
Power Rake Blades
De-Thatcher
Mfg. No.
Order No.
Size In.
EA6F
ESKE6
6
EA8F
ESKE8
8
EA10F
ESKE10
10
Square-cut hardwood handle. Sharpened
carbon steel blades. Orange head.
Mfg.
No.
Order
No.
Lgth.
Ft.
Point
Spread In.
DG-75
SEYDG75
4
5
Loosens and removes dead grass and allows
new seed to root. Adapts to most mowers.
Mfg. No.
370-019
Mfg. No.
370-011
Order No.
ORE14158
Dim. In. W x L
2-1/4 x 16
Power Rake Springs
Order No.
ORE370011
Desc.
Replacement springs
ALASKA INDUSTRIAL
HARDWARE, INC.
ORDER ONLINE TODAY — SHIPS OUT TOMORROW!
www.
.com
AIH Order Desk
(907) 276-7201
1-800-478-7201
507
Outdoor Equipment
Campers’ Axes
Axes
Sub-Zero
Axes
Boys’
Nylon-vinyl grip. Includes sheath.
Mfg.
No.
Order
No.
Edge
Lgth. In.
OAL
In.
E44A
ESTE44A
4
16
Camping Axes
VHN30101
Hickory handle.
Mfg.
No.
Order
No.
Handle
Lgth. In.
Head
Wt. Lbs.
1188700
AMS11887
28
2-1/4
VHN32201
Axes
Michigan pattern design with white hickory
handle. Features hollow ground blade for
deep cuts and easy release. 3-1/2-lb. head
weight. 36" length.
Michigan
Nylon-vinyl grip. Includes sheath.
Mfg.
No.
Order
No.
Edge
Lgth. In.
OAL
In.
E45A
ESTE45A
4
26
AMS11882
Mfg. No.
Order No.
Desc.
301-01/ZSB3 1/2
VHN30101
Single bit
322-01/ZDB3 1/2
VHN32201
Double bit
Axes
Sportsman’s
AMS11886
Axe Sheaths
Features 36" hickory handle and 3-1/2 lb.
head.
Leather grip. Includes sheath.
Mfg.
No.
Order
No.
Edge
Lgth. In.
OAL
In.
E14A
ESTE14A
2-3/4
12
Mfg. No.
Order No.
Desc.
1188200
AMS11882
Single bit
1188600
AMS11886
Double bit
Single Bit
Single Bit Axes
Axes
Sportsman’s
Features forged-steel axe head for maximum
strength and 36" fiberglass handle
Nylon-vinyl grip. Includes sheath.
Mfg.
No.
E24A
Order
No.
Edge
Lgth. In.
ESTE24A
3-1/4
OAL
In.
Mfg. No.
Order No.
Wt.Lbs.
1127200
AMS11272
3.5
Desc.
MGN01001
Standard axe sheath
Axe/Saw Sets
Gator
Single bit. Hickory handle.
Mfg.
No.
Order
No.
Handle
Lgth. In.
Head
Wt. Lbs.
1188000
AMS11880
14
1-1/4
(907) 279-6691
1-800-478-4393
Order No.
1001
Camping Axe Sheaths
Axes
GHD Order Desk
Mfg .No.
14
Camping/Hunters’
508
Fits most standard 4-1/2-lb. axes and blades
up to 8". Heavy duty snap closures. Rivet reinforced leather construction.
Features forged steel axe with textured polyamide grip. Saw fits inside axe handle. Includes nylon sheath.
Mfg.No.
Order No.
Desc.
22-41420
GER41420
Axe/saw set
ORDER ONLINE TODAY — SHIPS OUT TOMORROW!
www.ghdalaska.com
Fits most standard 1/4 lb. axes. Heavy duty
snap closure. 2" belt slot. Leather construction.
Mfg. No.
Order No.
Desc.
420
MGN00420
Camping axe sheath
2192 VIKING DRIVE
ANCHORAGE, AK 99501
GENERAL HARDWARE
DISTRUBUTORS
Outdoor Equipment
Wood Splitting Tools
Order No.
E3-FF4
ESTE3FF4
Honda Engine
Lickety Splitter™
Fireside Friend® Splitting Tool is forged in
one piece. Features nylon-vinyl grip.
Mfg. No.
Log Splitters
Wood-Splitting Mauls
Fireside Friend®
Edge Lgth. In. OAL In.
2-3/8
Steel construction.
Mfg.
No.
1131500
14
Order
No.
Head
Wt. Lbs.
OAL
In.
AMS11315
12
34
Wood-Splitting Wedges
Torpedo™
Durable forged steel wedge for
efficient wood splitting with each
strike by projecting force in four
directions.
Wood Splitters
Mfg.
No.
Sledge Eye
Order
No.
2414200 AMS24142
Wt.
Lbs.
Lgth.
In.
4
7
For splitting or towing in horizontal or vertical
position. Features built-in log cradle, hydraulic cylinder for maximum splitting force, autoreturn valve and 2-stage hydraulic pump.
Designed for safety with shielded wedge and
channel beam. Measures 78" L x 42" H (horizontal). Maximum log length 26".
Mfg.
Order
Splitting
Beam
No.
No.
HP Force Tons Size In.
S401622PH SPC401227
Mfg.
No.
5.5
22
6x6
Log Catchers
Order
No.
Desc.
40141600 SPC401416 Log catcher for 22 – 35 ton splitters
Wood-Splitting Wedges
AMS11896
Square Head
Log Splitters
12 Ton — Gas
AMS11903
Features 36" handle, handle guard to prevent
slipping or loosening and 7/8" x 2-1/2" eye.
Mfg.
No.
Order
No.
Head
Wt. Lbs.
Handle
Type
1189600
AMS11896
6
FiberPro®
1190300
AMS11903
8
Hickory
Wood Splitters
Mfg.
No.
Order
No.
Net
Wt. Lbs.
Head
Size In.
Lgth.
In.
1132400
AMS11324
4
1-5/8
8-1/4
1132600
AMS11326
5
1-3/4
9-1/4
1132900
AMS11329
6
1-7/8
9-1/2
EPA approved OHV gasoline engine. Adjustable beam splits at two different heights.
Features 10" heavy duty tires (off-road only)
and tandem pin style hitches for towing behind ATV or tractor.
Mfg
Order
Split Force Log Cap.
No.
No.
Tons
Lgth. In. HP
Peavy/Cant Hooks
Sledge Eye
LSG12
Dual
GLOLSG12
12
21
6.5
Log Splitters
5 Ton —
­ Electric
AMS11894
AMS11898
Features 36" handle and 1" x 1-3/8" eye.
Forged steel axe head for maximum strength.
Mfg.
No.
Order
No.
Head
Wt. Lbs.
Handle
Type
1189400
AMS11894
6
Hickory
1189800
AMS11898
8
Fiber Pro®
ALASKA INDUSTRIAL
HARDWARE, INC.
Lightweight aluminum construction. Features
anti-slip cant teeth and a retractable peavy
point. Includes a log jack. Use for rolling logs,
positioning log ends and use the log jack for
cutting raised logs.
Mfg. No.
DUAL W/JACK
Order No.
WDC55832
Desc.
Peavy/Cant hook
with log jack
Electric motor. Two handed operation keeps
hands clear of action while operating, allowing for consistent and safe cutting every time.
Mfg.
Order Split. Force Log Cap. In.
No.
No.
Tons
L x Dia.
HP
LS5TL GLOLS5TL
ORDER ONLINE TODAY — SHIPS OUT TOMORROW!
www.
.com
5
20 x 10
AIH Order Desk
(907) 276-7201
1-800-478-7201
2
509
Outdoor Equipment
Broadcast Spreaders
Heavy Duty
Firewood Carts
Haul-It™ — Wood Mover
Heavy duty coated steel frame.
Stainless
steel
gears, axle, agitator shaft and
linkage. Rust/corrosion proof hopper. Flow regulator on handle. Up
to 17,500 sq. ft.
of coverage. 13"
pneumatic tires.
Heavy duty tubular steel
construction. Durable DuPont™ powder coated steel
is engineered to be long
lasting. Slim design featuring easy tilt pivot point to
enable movement with minimal user effort. Pneumatic
tires easily roll over rough
terrain.
Mfg. No.
Order No.
90490
SHL90490
Dim. In. W x H
24 x 42
Mfg. No.
Order No.
Cap. Lbs.
LG9550
HBCLG9550
100
Lumber Racks
Durable
metal
construction composed of high
grade
powder
coated steel. Features adjustable
length to accommodate
varied
loads. Requires
two 2 x 4's (sold
separately).
Order No.
90459
SHL90459
Dim. In. W x H
Hand-Held
SHL90404
SHL90402
SHL90402
1/5
2/5
Mfg. No.
RHS1
Order No.
30-360
510
GHD Order Desk
(907) 279-6691
1-800-478-4393
16
Timber Carriers
Mfg.
No.
Order
No.
Lgth.
Ft.
Dia.
In.
09051
DIX09051
4.5
2-1/2
Cant Hooks
214
Seeder/Spreaders
Features
nylon
bag hopper with
zippered
top,
heavy-duty
contoured base,
crank
handle,
spring
loaded
shut-off,
and
adjustable
shoulder
strap.
Integrated shaker
agitator provides
even material feeding to distribution plate.
Corrosion and tear resistant.
Mfg. No.
Order No.
Spread Width Ft.
2750
EWY2700A
8 to 12
46-3/5 x 50 x 15-1/2
46-3/5 x 96 x 15-1/2
Drop Spreaders
Duckbill hook, hardwood handle and extension toe ring.
Mfg.
No.
Order
No.
Lgth.
Ft.
Dia.
In.
06250
DIX06250
4-1/2
2-1/2
Log Jacks
Dixie
For canting or jacking logs. Hardwood handle.
Mfg. No.
Order No.
Desc.
06238
Ev-n-Spred™
DIX06238
Log jack
Peavies
Steel fixtures used to
hold 2x4’s together for
storage racks, shelving, workbenches, and
stands. Protects firewood from pests and
decay. Adjustable and
can be built to any
length.
Order No.
Pkg. Qty.
SEY30360
Lgth. Ft.
DIX10042
Cap. Cu. In.
HBCCRHS1
Stack-It Brackets
Mfg. No.
Order No.
14 x 43
All steel frame rack with black powder coat
finish keeps wood off ground eliminating
bugs, mold growth, and rotting.
SHL90404: Can also store 4 – 8 tires.
SHL90402: Waterproof cover adjusts to fit
split wood up to 24" in length, and slides up
and down to fit height of wood stack.
Mfg.
Order
Cord
Dim. In.
No.
No.
Storage
LxWxH
90404
90402
Mfg. No.
10042
Hardwood handle.
Rotary broadcast style
seeder/spreader holds
1000 sq. ft. of fertilizer
or seed. Constructed
of heavy duty poly material. Adjustable control knob.
Firewood Storage Racks
SHL90404
1-1/2" handle diameter. Anodized finish.
Seeder/Spreaders
Firewood Brackets
Mfg. No.
Pike Poles
Anodized Aluminum
4
Rustproof
hopper
holds up to 60 lbs. of
fertilizer. Rate control
on handle enables
precise adjustment. 8"
poly wheels. Fully assembled.
Mfg.
No.
7350SU
Order
No.
EWY7350SU
Cap.
Cu. In.
1770
ORDER ONLINE TODAY — SHIPS OUT TOMORROW!
www.ghdalaska.com
Spread
Width In.
20
Solid Socket
Duckbill hook and hardwood handle. Tubular
steel socket and driven pick.
Mfg. No.
00250
2192 VIKING DRIVE
ANCHORAGE, AK 99501
Order No.
Lgth. Ft.
Dia. In.
DIX00250
4-1/2
2-1/2
GENERAL HARDWARE
DISTRUBUTORS
Outdoor Equipment
Folding Saws
Skidding Tongs
Machetes
Removable fine
tooth and coarse
blades.
Nylon
handle. Includes
nylon
sheath.
14-1/2" overall
length.
McMachete
Mfg. No.
Order No.
46036
Blade Lgth. In.
GER46036
6-1/4
Blue painted tongs on ring only.
Note: Not for overhead lifting.
Mfg.
No.
Order
No.
Dia.
In.
40225
DIX40225
1
Open. In.
Max. Min.
25
4
Hookaroons
Solid steel construction. Features offset saw
blade on backside, and overmolded rubber
handle for comfort grip. Includes clamshell
nylon sheath.
Mfg. No.
Order No.
Blade Lgth. In.
MCMACHETE
MEY36016
18
Features cam-lever blade tension control
system. 21" length.
Mfg. No.
Order No.
Desc.
Machetes
Pro Series
1.5" Dixie standard blade. Hickory handle.
Mfg. No.
12220
Order No.
DIX12220
Bow Saws
1909900
2250800
Handle Lgth. In.
AMS19099
AMS22508
Bow Saw
Replacement blade
36
Bow Saws
Draw Knives
Straight
For use in woodworking applications. Features high carbon spring steel blade and
kiln-dried ash handles with lacquer finish.
Resharpenable.
Mfg. No.
49941
49931
49951
Order No.
DIX49941
DIX49931
DIX49951
Mfg. No.
Order No.
Lgth. In.
Wt. Lbs.
MCMACHAXE
MEY00805
12
2.16
Features plated tubular steel frame. 30"
length. Includes blade cover.
Mfg. No.
Order No.
Desc.
1909700
2251000
AMS19097
AMS22510
Bow saw
Replacement blade
Blade Lgth. In.
8
10
13
Folding Saw/Pruner Sets
Bow/Hack Saws
Stripping Tools
In-Shaves
Bowsaw/hacksaw combination comes with
hacksaw high-speed steel blade for cutting
metal and plastic and bowsaw blade for cutting wood and general yard work. 6" throat
depth. Includes safety blade guard.
Mfg. No.
Order No.
Blade Lgth. In.
For log stripping, fence posts and craft
projects. Features high carbon spring steel
blade and kiln-dried ash handles with lacquer
finish. Resharpenable.
Mfg. No.
49961
Order No.
DIX49961
Blade Lgth. In.
ALASKA INDUSTRIAL
HARDWARE, INC.
5
Features no-slip rubber grip handles. Saw
blade length of 6-1/2" and overall length of
15". Push button release on saw and blade
made from stainless steel. Pruner has overall
length of 8-1/2". Includes nylon sheath.
Mfg. No.
Order No.
Desc.
31-000426
GER11625
Saw and pruner combo
80799
NIC80799
Bowsaw Blades
Bowhack
Mfg. No.
80814
ORDER ONLINE TODAY — SHIPS OUT TOMORROW!
www.
12
.com
Order No.
NIC80814
AIH Order Desk
(907) 276-7201
1-800-478-7201
Lgth. In.
12
511
Outdoor Equipment
Premium Water Hoses
Flexzilla™
Extreme all-weather flexibility from -40° —
150°. Kink and abrasion resistant. Anodized
aircraft aluminum male and female fitting.
Rugged bend restrictors, no memory so it
lays flat.
Mfg. No.
HFZW5850YW34
HFZW5875YW34
Garden Hoses
Garden Hoses
Order No.
Lgth. Ft.
LEG58050
LEG58075
50
75
Hot Water Hoses
Professional-Duty
Soft & Supple®
Formula Z7® — All Weather
Five-ply rubber/vinyl kink-resistant construction. Abrasion resistant soft cover. SEALTITE® leakproof coupling.
5/8" inner diameter. Five-ply rubber/vinyl reinforced. Kink-resistant.
Mfg. No.
SNSS58025
SNSS58050
SNSS58075
SNSS58100
SNSS34050
SNSS34075
Order No.
Lgth. Ft.
5/8" ID
SWASS5825
SWASS5850
SWASS5875
SWASS58100
3/4" ID
SWASS3450
SWASS3475
25
50
75
100
Mfg. No.
Order No.
Lgth. Ft.
SNWG58050
SNZ758075
SWAZ75850
SWAZ75875
50
75
Garden Hoses
Fairlawn®
50
75
Hoses
Commercial-Duty
Reinforced hose withstands hot water up
to 200°F. 5/8" inner diameter. Heavy duty,
crushproof brass couplings.
Mfg. No.
SNCHW58025
SNCHW58050
Order No.
Lgth. Ft.
SWAHW5825
SWAHW5850
25
50
Garden Hoses
Rubber — Heavy Duty
Three-ply, knit reinforced construction. For
light-duty use. 5/8" ID.
Reinforced rubber construction. Handles hot
water up to 400°F. 500 PSI capacity. 3/4"
inner diameter. Cover resists oil, chemicals
and abrasion. Heavy duty crushproof brass
couplings.
Mfg. No.
Order No.
Lgth. Ft.
SNCCD34050
SWACD3450
50
Mfg. No.
Order No.
Lgth. Ft.
SNFA58025
SNFA58050
SNFA58075
SNFA58100
SWAFA5825
SWAFA5850
SWAFA5875
SWAFA58100
25
50
75
100
Reinforced Garden Hoses
Medallion
Watering Hoses
American Pride®
5/8" diameter kink-resistant, professional
grade reinforced construction. For hot water
up to 160°F. SEAL-TITE® leakproof coupling.
Mfg.No.
Order No.
Lgth. Ft.
SNCPM58025
SNCPM58050
SNCPM58075
SNCPM58100
512
SWAPM5825
SWAPM5850
SWAPM5875
SWAPM58100
GHD Order Desk
(907) 279-6691
1-800-478-4393
25
50
75
100
Heavy duty five-ply rubber/vinyl construction.
Dual PVC tube. Abrasion-resistant cover.
Crushproof machined brass couplings.
Features 3-ply design with nylon spiral reinforcing. Stays flexible in cold temperatures
and durable in hot temperatures. Solid brass
full flow coupling.
Mfg.No.
Order No.
Lgth. Ft.
Mfg. No.
Order No.
SNCG34050
SWACG3450
50
SNME12050
SWAME1250
ORDER ONLINE TODAY — SHIPS OUT TOMORROW!
www.ghdalaska.com
2192 VIKING DRIVE
ANCHORAGE, AK 99501
I.D. In. Lgth. Ft.
1/2
50
GENERAL HARDWARE
DISTRUBUTORS
Outdoor Equipment
Hose Reel Garden Hoses
Watering Hoses
Hoses
All-Weather
Earth Friendly
Marine/Camper
Drinking water safe. 1/2" inner diameter. For
use on boats and RVs. Non-marring nylon
couplings.
Mfg. No.
Order No.
Lgth. Ft.
ELMRV12025
SWAMC1225
25
ELMRV12050
SWAMC1250
50
Durable, weather-resistant construction.
Holes spaced evenly along hose for thorough sprinkling.
Mfg. No.
Order No.
SNTEC050
Lgth. Ft.
SWA3TEC50
50
Four-ply, knit-reinforced construction for durability, long life and medium flexibility. Kinkresistant, easy coiling and uncoiling. Ideal for
hose reels. Five-year warranty.
Mfg. No.
Order No.
Lgth. Ft.
ID In.
SNHR58150
SWAHR58150
150
5/8
Hose Reel Carts
Reinforced Hoses
Features vinyl reinforcement and brass ends.
Mfg. No.
Order No.
I.D. In.
Lgth. Ft.
SN58R015
SWA58737
5/8
15
Irrigation Hoses
Wall Mount — Hose Butler
For use in home, farm and commercial applications. Features lightweight 1-1/2" steel
frame construction with pneumatic tires, all
brass/galvanized fixtures, powder coat finish,
90° brass swivel and non-slip handle grip. Includes 5-ft. inlet hose.
For hose storage in gardening or landscaping applications. 14 Ga. steel construction
with powder coat finish. Features 5-ft. radius
and key slot mounting holes.
Mfg. No.
Ultra Earth Quencher®
Hose Racks
4-Wheel
871-MI
Order No.
Hose Cap.
LIB87101
Up to 250' of 5/8" hose
Mfg. No.
Order No.
Hose Cap. Ft.
LIB69598
75
598
Hose Reels
Multi-Purpose
For drip irrigation; water seeps through pores
in hose. Uses 70% less water than standard
watering techniques. PVC construction for
easy cleaning and fungus resistance. For
above-ground or buried applications. 5/8" ID.
Mfg. No.
Order No.
Lgth. Ft.
SNUER050
SWAUER50
50
ALASKA INDUSTRIAL
HARDWARE, INC.
13 Ga. steel construction with all brass/galvanized fixtures and powder coat finish. Includes 5-ft. inlet hose.
Mfg. No.
703-1 COLOR LBL
Order No.
LIB69703
Hose Cap.
Up to 200 ft. of 5/8" hose
ORDER ONLINE TODAY — SHIPS OUT TOMORROW!
www.
.com
AIH Order Desk
(907) 276-7201
1-800-478-7201
513
Outdoor Equipment
Impulse Sprinklers
Rotating Sprinklers
Rainpulse®
Automatic Sprinkler Kits
Pulsating
SunMate®
Features metal spike
base with series connection, impact-resistant plastic head and
built-in automatic water
shut-off. Provides circular spray pattern up to
85 ft.in diameter
Converts hose faucet to 4-station sprinkler
system. No digging required.
Mfg. No.
Order No.
Desc.
58872N
ORB58872N
Automatic sprinkler kit
Mfg. No.
Order No.
Pkg. Qty.
50201
NEL80555
1
Impulse Sprinklers
Spike
Tripod Sprinklers
Impact resistant, rust-proof polymer sled
base. Provides full or partial coverage. Patented impulse arm saves water by eliminating back and side splash. Diffuser screw
allows easy fingertip adjustment of water
stream for even coverage.
Mfg. No.
Order No.
Coverage Sq. Ft.
993PKDG
GIL49933
3200
Adjustable — SunMate®
Sprinklers
Oscillating
Constructed of metal tripod with brass impact
head. Features adjustable weighted legs and
goose neck hose attachment.
Mfg.
No.
Order
No.
Sprinkler
Rad. Ft.
Ht.
In.
58308D
ORB58308
20 – 40
25 – 48
High impact, rust resistant poly and stainless
steel construction on impulse head provides
full or partial coverage. Patented impulse
arm saves water by eliminating back and
side splash. Diffuser screw for easy fingertip
adjustment of water stream for even coverage. Poly spike base.
Mfg.
No.
993NS
Order
No.
GIL09932
Coverage Ft. Dia.
@ 30 PSI
@ 60 PSI
86
112
Timer oscillating sprinkler waters up to 3,000
sq. ft. Dial selects up to 4 hours of watering
or 1/2" of water on lawn. Multi-position flip action dial for a variety of settings.
Mfg. No.
Order No.
Coverage Sq. Ft.
7900PP
GIL10930
3,000
Rotating Sprinklers
Pulsating
Traveling Sprinklers
Oscillating Sprinklers
Raintrain®
Follows hose pattern. Rustproof cast-iron
model tractor. Travels up to 200-ft. Twospeed transmission with automatic shut-off.
Adjustable spray arms.
Mfg. No.
Order No.
Max. Coverage Sq. Ft.
1865
NEL81865
13,500
514
GHD Order Desk
(907) 279-6691
1-800-478-4393
Water saving design. Impact resistant, rustproof polymer sled base. Provides full or partial coverage. Patented impulse arm saves
water by eliminating back and side splash.
Diffuser screw allows easy fingertip adjustment of water stream for even coverage.
Polymer and stainless steel construction.
Mfg. No.
193SPB
Order No.
GIL10993
ORDER ONLINE TODAY — SHIPS OUT TOMORROW!
www.ghdalaska.com
Coverage Sq. Ft.
15 precision spray jets on molded spray tube
provide even coverage. Extra-wide base for
added stability.
Mfg. No.
7800PS
Order No.
Coverage Sq. Ft.
GIL28830
3000
5800
2192 VIKING DRIVE
ANCHORAGE, AK 99501
GENERAL HARDWARE
DISTRUBUTORS
Outdoor Equipment
Pistol Grip Nozzles
Pistol Grip Nozzles
Pistol Grip Nozzles
Adjustable spray pattern. Hold-open button
for continuous spray. Molded grip with handle
loop for easy storage.
Metal handle and body. Curved design to fit
hand. Built-in flow control. Lock-open for extended watering. Adjustable flow or patterns
including shower, full, soaker, center, cone,
stream, mist and flat.
Solid Metal
Metalized/full size nozzle features all brass
valve stem with permanent adjusting nut,
hold-open clip, stainless steel spring, and
lifetime “duck” packing seal.
Mfg. No.
573
Order No.
Desc.
GIL00573
Solid metal pistol grip nozzle
Adjustable
Mfg. No.
223
Order No.
Desc.
GIL13223
Adjustable pistol grip nozzle
Front Lever
Mfg. No.
417
Order No.
No. Spray Patterns
GIL00417
8
Pistol Nozzles
Pistol Grip Nozzles
Adjustable Tip
Poly — Threaded
Nozzle Sets
3-Pc. — SunMate®
Male hose threaded front for attaching accessories. Impact resistant, rustproof, full
size, polymer body. Hold-open clip for continuous spraying.
Mfg. No.
474
Order No.
Desc.
GIL00474
Poly pistol grip nozzle
All metal body and handle. Curved design to
fit hand. Built-in flow control. Lock-open for
extended watering. Adjustable tip controls
spray.
Mfg. No.
423
Pistol Grip Nozzles
Order No.
Desc.
GIL00423
Pistol nozzle
High-impact metal and brass construction.
Features soft-dial turret guard, comfort grip
and spray adjustment from fine mist to heavy
stream.
Commercial Grade
Pistol Grip Nozzles
Male hose threaded front for attaching accessories. Heavy duty, full size, die-cast zinc
body. Solid brass valve stem with permanent
adjusting nut.
Hold-open button for continuous spraying.
Molded grip for cushioned comfort. Handle
loop for easy storage.
Mfg. No.
572TFR
Order No.
Desc.
GIL05721
Insulated pistol grip nozzle
ALASKA INDUSTRIAL
HARDWARE, INC.
Adjustable
Mfg. No.
1227
Order No.
No. Spray Patterns
GIL13227
8
Mfg. No.
Order No.
Desc.
58594
ORB58594
3-Pc. nozzle set
ORDER ONLINE TODAY — SHIPS OUT TOMORROW!
www.
.com
AIH Order Desk
(907) 276-7201
1-800-478-7201
515
Outdoor Equipment
Sweeper Nozzles
Spray Nozzles
Mechanical Watering Timers
Firemen’s Style
Hose nozzle provides tough-cleaning sharp
stream, rinsing full flow and cone spray patterns.
Mfg. No.
06BJ
Order No.
Desc.
GIL00061
Solid brass
Adjustable Spray Nozzles
Solid Brass
For maximum cleaning power with medium
to high water pressure. Constructed of zinc,
aluminum, glass-filled nylon and brass.
Twist-on design with adjustable spray pattern
and comfort grip.
Adjustable sprays include fine spray, needle
stream and heavy rinse. Fast three turns
from close to open.
Mfg. No.
528T
Order No.
GIL12528
Mfg. No.
50170
Order No.
Desc.
NEL80595
Firemen’s style twist nozzle
GIL00428
Desc.
GIL32930
Mechanical timer
Hose Shut-Off Valves
Fire Nozzles
Twist
Zinc shut-off valve controls water flow and
saves water and time.
Two O-ring seals for leakproof operation.
Impact resistant, rustproof polymer construction. Adjustable sprays include fine, needle
stream and heavy rinse.
428
Order No.
Desc.
Adjustable Poly
Order No.
Mfg. No.
9301
Solid brass
Spray Nozzles
Mfg. No.
Continuous watering up to 120 minutes.
Manual on/off control. Works with water pressure ranging from 15 – 120 PSI.
Mfg. No.
05V
Order No.
Desc.
GIL00003
Shut-off valve
Desc.
Adjustable spray nozzle
Hose Y-Adapters
Heavy duty construction for use with hot or
cold water. Use 5/8" or larger hose for best
performance. Adjustable spray styles: cone,
sharp stream and full action.
Spray Nozzles
Mfg. No.
Industrial — High Flow
4TW
Order No.
Desc.
GIL10401
Fire nozzle
Metal Shut-Off Valve
Watering Wands
Multi-Pattern
Insulated die-cast metal body with reinforced
brass stem and metal shut-off handle.
Mfg. No.
Order No.
50503
NEL50503
516
GHD Order Desk
(907) 279-6691
1-800-478-4393
Max. PSI
350
Shower sprinkler watering wand features
durable, rustproof polymer construction on
sprinkler head and hand grip. Built-in flow
control.
Mfg. No.
317R
Order No.
Lgth. In.
GIL00317
32
ORDER ONLINE TODAY — SHIPS OUT TOMORROW!
www.ghdalaska.com
Twin shut-off valves control water flow for
two hoses. Longer legs prevent hose kinks
at faucet. Cap type valve handle resists
breakage. Full ball and retainer rings reduce
leakage, even at low water pressure. Rugged metal construction. Withstands hot water
temperatures up to 160°F.
Mfg. No.
15
2192 VIKING DRIVE
ANCHORAGE, AK 99501
Order No.
Desc.
GIL00015
Hot water Y-adapter
GENERAL HARDWARE
DISTRUBUTORS
Outdoor Equipment
Hose Y-Adapters
Polymer Shut-Off Valve
Twin shut-off valves control water flow for
two hoses. Longer legs prevent hose kinks at
faucet. Cap type valve handle resists breakage. Full ball and retainer rings reduce leakage, even at low water pressure. Durable,
rustproof polymer construction.
Warning: Not recommended for hot water
use.
Mfg. No.
17
Order No.
Desc.
GIL00017
Cold water Y-adapter
Faucet Connector Sets
Full Flow Hose Adapters
Quick Connect
Poly
Easily attaches to nozzle or sprinkler for
quick connection to hose. Includes two male
hose end adapters.
Mfg. No.
Order No.
Desc.
29QMFF
GIL12529
Male ends
Full flow quick connectors provide 45% more
water flow. Durable, rustproof polymer construction. Includes one female connector and
one male adapter.
Mfg. No.
Order No.
Desc.
39QFF
GIL12239
Faucet connector set
Compression Hose Ends
Quick Connects
GIL00259
GIL00260
5/8" plastic compression hose end.
Heavy-duty solid brass construction with
comfortable rubber grips. Flow through design.
Brass Manifolds
SunMate®
Order No.
Desc.
09QC
Mfg. No.
GIL00009
Male & female set
09QCM
GIL00091
Male
Mfg. No.
58CPF
58CPM
Order No.
GIL00259
GIL00260
Hose End Type
Female
Male
Polymer Hose End Sets
Quick Connect
Garden Hose Connector
Starter Kits
Quick Connect
Easily connects hose to sprinkler, nozzle, or
other hose end accessories. Includes one female hose end connector with shut-off and
two male hose end adapters. Durable and
rustproof.
For use with one to four sprinkler hose faucet
valves or multiple hose connections. Features four hose outlets with shut-offs, leakfree ball valve, mounting brace and standard
male threaded swivel connection.
Mfg. No.
Order No.
Connection Size In.
62010
ORB62010
3/4
Mfg. No.
Order No.
29AQ
GIL08293
Desc.
Hose end connector
Plastic Hose Ends
Quick Connector Set
Hose Adapters
Features brass swivel coupling. Prevents
hose kinking and twisting, saving wear and
tear on hoses and accessories.
Mfg. No.
FX1C
Order No.
Desc.
GIL01082
Kink-free adapter
ALASKA INDUSTRIAL
HARDWARE, INC.
Provides quick and easy connections to
faucet, hose, and hose end accessories. Includes one female hose end connector with
automatic water shut-off, two male hose end
adapters, one male faucet adapter and one
female faucet connector. Impact-resistant,
rustproof polymer construction.
Mfg. No.
2939Q
Order No.
Desc.
GIL08295
Quick connector kit
Easily connects hose to sprinkler, nozzle or
other hose end accessories. Includes one
female hose end connector with shut-off and
two male hose end adapters.
Mfg. No.
29Q
Order No.
GIL08290
ORDER ONLINE TODAY — SHIPS OUT TOMORROW!
www.
.com
Desc.
Quick connector shut off
AIH Order Desk
(907) 276-7201
1-800-478-7201
517
Outdoor Equipment
Hose Menders
Hose Ends
Female Hose End
1534M/50453
NEL80654
1558F/50451
NEL80653
1558M/50450
NEL80652
3/4
Male
5/8
Female
5/8
Male
Washers
Filter
GIL00164
For watertight seal. Filter screen removes
dirt, sand and debris.
Mfg. No.
Full flow plastic hose end quick connector set
includes one female hose end connector with
shut-off and two male hose end adapters.
Mfg. No.
29QFF
Order No.
Desc.
GIL12229
Full flow hose end
GIL00165
GIL00166
02FW
Zinc menders and brass couplers. Stainless
steel screws.
Mfg. No.
01MZ
01FZ
01HMZ
Order No.
Pkg. Qty.
GIL00002
3
Washers
Rubber
Order No.
Desc.
GIL00164
GIL00165
GIL00166
5/8 & 3/4 Male
5/8 & 3/4 Female
5/8 & 3/4 Hose Mender
Plastic Hose Ends
Hose Repair Clamps
For watertight seal. Resists hardening and
cracking.
Brass
Mfg. No.
01ORS
Order No.
Pkg. Qty.
GIL00010
6
GIL00001
Washers
Vinyl
NEL80655 NEL80654
GIL00011
For watertight seal.
Mfg. No.
O1RW
NEL80653
GIL00012
Repairs rubber or plastic hose. Premium nylon construction with stainless steel screws.
Mfg. No.
Order No.
Dim. In.
01HM
GIL00001
5/8 & 3/4 Hose mender
01M
GIL00011
5/8 & 3/4 Male
01F
GIL00012
5/8 & 3/4 Female
518
GHD Order Desk
(907) 279-6691
1-800-478-4393
Order No.
Pkg. Qty.
GIL00018
10
NEL80652
For garden hose repairs. Stainless steel
worm gear hose clamp with machined brass
coupling and shank.
NEL80655 & NEL80653: Features brass
swivel coupling. Includes washer.
Mfg. No.
Order No.
1534F/50454
NEL80655
Hose Size In. Desc.
ORDER ONLINE TODAY — SHIPS OUT TOMORROW!
www.ghdalaska.com
3/4
Female
2192 VIKING DRIVE
ANCHORAGE, AK 99501
GENERAL HARDWARE
DISTRUBUTORS
Outdoor Equipment
Stainless Steel Sprayers
1749
Order
No.
Wand
Lgth. In.
Cap.
Gal.
CHA1749
18
3
Pro Series
Premier
For fertilizers, weed killers, pesticides and other professional
applications. Features longlasting stainless steel tank with
wide opening for easy filling
and cleaning and wide base to
resist tipping. Rinses clean for
multi-use. 42" reinforced hose.
Curved brass wand with cone
nozzle adjustable from mist to
stream. “Lock-on” function for
continuous spraying. Pump-action pressurizing. Includes carrying strap.
Mfg.
No.
Poly Sprayers
Metal Sprayers
Features funnel-top tank for
easy filling, 42" reinforced
hose, “lock-on” function for
continuous spraying, and Teflon® seals and gaskets.
Pump-action
pressurizing.
Brass cone nozzle adjusts
from fine mist to coarse
stream. Wide-base metal tank
prevents tipping. Includes carrying strap. Lifetime warranty.
Mfg. Order
Wand Cap.
No.
No.
Lgth. In. Gal.
1380
CHA1380
18
Features SureSpray™ anti-clog
filter, comfort grip handle, and
brass nozzle. 4" wide mouth
opening for easy filling. Clear reinforced hose is engineered for
use with herbicides, pesticides,
and fertilizers. Viton chemical
resistant seals and gaskets.
3
Mfg. No.
Order No.
Cap. Gal.
26021
26031
CHA26021
CHA26031
2
3
Poly Sprayers
Sprayers
Chemical Resistant
Concrete Sprayers
Industrial — Xtreme™
For use with high concentrations
of acetone, naphtha, xylene, toluene and other chemicals. Features lined steel tank, brass spray
nozzle and quick-release handle,
nylon reinforced vinyl hose, and
built-in wand holder. Wide mouth
allows easy filling and cleaning.
Mfg. No.
Order No.
Cap. Gal.
19049
CHA19049
3.5
Industrial Sprayers
Acid staining sprayer features wide mouth
opening for easy filling/cleaning. Includes
curved crush resistant brass extension, Viton chemical resistant seals and gaskets,
adjustable brass cone nozzle, and flexible all
weather hose.
Mfg.
Order
Cap.
Extension
No.
No.
Gal.
Lgth. In.
22230
CHA02223
1949
Cap.
Gal.
Wand
Lgth. In.
CHA1949
3.5
24
Replacement Parts
Mfg. No.
Order No.
Desc.
6-5797
CHA65797
Nozzle
6-7704
CHA67704
Extension
6-6062
CHA66062
Shut-Off
6-6091
CHA66091
Hose
ALASKA INDUSTRIAL
HARDWARE, INC.
Order No.
Cap. Gal.
CHA2001
1
Hand Sprayers
24
Designed for household
and cleaning applications. Features adjustable poly cone nozzle,
lightweight translucent
poly tank, easy-grip handle and sprayer pump.
Premier
Lightweight, rugged polyethylene
construction.
Wide mouth design for
convenient
filling
and
cleaning, anti-clog filter
in tank. Features include:
reinforced hose, adjustable cone nozzle, “lockon” function for continuous
spraying, Teflon®-coated
seals and gaskets, and
built-in pressure release
valve. Lifetime warranty.
Sprayers
Order
No.
Mfg. No.
20010
Poly Sprayers
Tri-Poxy®-lined steel tank
prevents corrosion and other
physical damage. Brass shutoff features “lock-on” and
quick release. Nylon braid
hose with vinyl core and
curved brass wand. Brass fan
spray nozzle 0.05 GPM/95°C
VOC Compliant.
Mfg.
No.
1
Light-duty for gardening and multi-purpose
use. Features 12" poly wand with 28" nylonreinforced hose. Nozzle adjusts from mist to
stream. May be used with or without wand.
Cleanable shut-off with built-in wrench. Intank anti-clog filter. Green color. 1-year warranty.
Mfg.
No.
21220
Order
No.
CHA2122
21230 CHA21230
* Extendable.
Wand
Lgth. In.
Hose
Lgth. In.
Cap.
Gal.
12
42
18
42
Mfg. No.
Cap. Oz.
CHA1002
48
Sprayer Accessories
Repair Kits
Mfg. No. Order No.
2
6-1925
6-1945
6-4566
CHA61925
CHA61945
CHA64566
3
6-4627
CHA64627
ORDER ONLINE TODAY — SHIPS OUT TOMORROW!
www.
Order No.
1002
.com
For Use With
Sprayer 3614, 6400
Spraryer 2122, 2123
4-position nozzle; fits all sprayers
1352, 1449, 1831, 1941, 1949,
1979, 1999, 19049, and 4163
AIH Order Desk
(907) 276-7201
1-800-478-7201
519
Outdoor Equipment
Round Point Shovels
Kodiak® — Long Handle
Features heavy-duty contractor-grade fiberglass handle, serrated blade and soft cushioned grip.
Mfg.
Order
Blade
Handle
No.
No.
Dim. In.
Lgth. In.
1558300
AMS15583
8-3/4 x 11-3/4
Round Point Shovels
D-Handle Shovels
Round point shovel features forward-turned
step, #2 blade and shaped fiberglass handle.
AMS15644
Powerstep™ — Fiberglass Handle
48
Square Point Shovels
Mfg.
No.
Order
No.
163034500
AMS03908
Kodiak® — Long Handle
Classic
Blade Dim. In. Hangle
WxH
Lgth. In.
8-3/4 x 11-1/2
47
Square Point Shovels
Kodiak®
Features contractor-grade fiberglass handle.
Dual durameter grip inside poly sleeve provides barrier between handle and grip. Cushioned outer grip for comfort and control.
Mfg.
Order
Blade
Handle
No.
No.
Dim. In.
Lgth. In.
1550500
AMS15505
9-3/4 x 11-1/2
48
D-Handle Shovels
Kodiak®
AMS15645
Steel and wood construction. D-grip provides
strength and durability. Forward-turned step
allows secure foot placement. Limited 10year warranty.
Steel head with wood handle.
AMS13035: Closed back design prevents
dirt buildup.
Mfg.
No.
Order
No.
1309500
1303500
AMS13095
AMS13035
Head Dim. In. Handle
WxL
Lgth. In.
9-3/4 x 11-1/2
9-3/4 x 11-5/8
Mfg.
No.
Excavator™
AMS01112
AMS15386
Order
No.
Desc.
Blade
Dim. In.
SFGDR/01111 AMS01111 Round Point 8-3/4 x 11-3/4
SFGDS
AMS01112 Square Point 9-3/4 x 11-1/2
Round Point Shovels
Viper
AMS15644
Round
9-1/2 x 12
AMS15645
Square
10 x 12
Garden Spades
Classic — D-Handle
Steel and wood construction. D-grip provides
strength and durability. Forward-turned step
allows secure foot placement. Limited 10year warranty.
AMS15895
Tempered steel blade for maximum strength.
Large step for easy digging. Ergonomic grip
designed for efficient lifting.
AMS15895: Features a D-handle.
Mfg. No.
Order No.
Handle Lgth. In.
1589500
1538600
AMS15895
AMS15386
20
48
520
GHD Order Desk
(907) 279-6691
1-800-478-4393
Blade Dim. In.
AMS15646
6-7/8 x 12
Round Point Shovels
Eagle — Long Handle
Durable, lightweight fiberglass handle with
hanger hole in top cap. Steel collar provides
added strength at handle/socket connection.
Tempered steel blade with rolled shoulder.
AMS47033
9-3/4 x 11-1/2
5-3/4 x 16
Order No.
15646
Kodiak®
Features cushioned fiberglass handle with
ergonomic D-shaped grip. Steel collar reinforces handle/socket connection. 30" handle
length.
Mfg.
Order
Blade
No.
No.
Size In.
Desc.
AMS15777
AMS47033
Mfg. No.
Round Point Shovels
AMS15777
1577700
47033
Blade
Dim. In.
15645
48
47
Features 30" fiberglass D-handle with cushioned grip. Large steel collar provides extra
strength.
Mfg.
No.
Point
15644
Round Point Shovels
AMS01111
Order
No.
Square point
Drain spade
Steel head with wood handle.
AMS13039: Closed back design prevents
dirt buildup.
Mfg.
No.
Order
No.
Head
Dim. In.
WxL
1309800
1303900
AMS13098
AMS13039
8-3/4 x 11-3/4
8-3/4 x 11-1/2
ORDER ONLINE TODAY — SHIPS OUT TOMORROW!
www.ghdalaska.com
Handle
Lgth. In.
48
47
Mfg.
No.
Order
No.
Blade
Dim. In.
Handle
Lgth. In.
1348500
AMS13485
8-1/4 x 11
46
2192 VIKING DRIVE
ANCHORAGE, AK 99501
GENERAL HARDWARE
DISTRUBUTORS
Outdoor Equipment
Edging Tools
Shovels
Groundbreakers® — EdgeAll™
Long Handle
Shovels
Classic — Long Handle
Solid steel construction with 53" handle and
cushioned grip for two-hand use. Suitable for
edging, trenching, digging, prying and scraping tasks. Square, flat blade provides striking
power, creates straight edges for trenching.
SEY12017
AMS15641
SEY12018
Features rear rolled step, #2 head size, 9"
square socket and contoured hardwood handle. 42".
AMS15642
48" sturdy, stained North American ash handle for long life. High carbon tempered steel
blade for durability. Forward-turned step allows secure foot placement on shovel head.
Limited 10-year warranty.
Mfg.
Order
Blade
No.
No.
Point
Dim. In.
15641
AMS15641
Round
9-1/2 x 12
1564200
AMS15642
Square
10 x 12
Mfg. No.
Order No.
Desc.
SV-LR90
SEY12017
Round point
SV-LS91
SEY12018
Square point
AMS13483
9 x 10-1/2
OAL
In.
869-08/EA8
VHN86908
61
Heat-treated steel blade and seal-coated
wood handle. Unique blade design is ideal for
trench clean out. 4" blade made of tempered
steel for maximum strength is designed for
digging a narrow trench. North American
ash handle for strength and durability. Used
to clear trenches, spillways, and ditches.
Mfg.
No.
Order
No.
Head
Dim. In.
WxL
Handle
Lgth. In.
1556600
AMS15566
4 x 12
47
12
1575500
AMS15755
Drain Spades
2560B
Order No.
Length In.
No. Teeth
QCR2560
54
10
Forward-turned step allows secure foot
placement on shovel head. Steel and wood
construction. D-grip provides durability and
strength. Limited 10-year warranty.
1564700
Order No.
Blade Dim. In.
AMS15647
5-3/4 x 14
48
Shingle Removers
Mfg. No.
Shovels
Mfg. No.
6-1/4 x 12
Ergonomic design for versatility and ease of
use with reduced worker fatigue. Steel construction with notched point edge and nail
puller.
Classic — D-Handle
46
AMS13300
8
Steel blade with wood handle. Notchedpoint blade. Designed for removing shingles.
Heavy duty fulcrum welded to back for leverage.
Mfg.
Order
Dim. In.
Handle
No.
No.
WxL
Lgth. In.
Agricultural Shovels
Ditch Master
Tough Built™
Blade
Wt.
Width In. Lbs.
Roofers’ Spades
Eagle — Long Handle
1348300
Order
No.
Kodiak®
Square Point Shovels
Contractor-grade fiberglass handle. Dual
durameter grip inside poly sleeve provides
barrier between handle and grip. Cushioned
outer grip for comfort and control. Steel collar provides added strength at handle/socket
connection. Tempered steel blade with rolled
shoulder.
Mfg.
Order
Blade
Handle
No.
No.
Dim. In.
Lgth. In.
Mfg.
No.
Shovels
Spades
AMS13301
Kodiak® — Ditch Master
Features 47" long fiberglass handle, steel
collar, and dual durometer grip with poly
sleeve inside and cushioned grip outside.
Round point steel blade. Contractor-grade
fiberglass handle with cushioned grip.
Plastic construction. 14" width. Non-sparking,
corrosion resistant. USDA/FDA approved.
Mfg. No.
Order No.
Color
REM6982B
SEA6982B
Blue
REM6982R
SEA6982R
Red
SEA6982W
White
Mfg.
No.
Order
No.
Desc.
Blade
Dim. In.
1330000
AMS13300
Round point
8.75 x 11.75
Mfg.
No.
Order
No.
Blade
Dim. In.
Handle
Lgth. In.
1330100
AMS13301
Square point
9.75 x 11.5
1552000
AMS15520
4 x 12
47
REM6982W
ALASKA INDUSTRIAL
HARDWARE, INC.
ORDER ONLINE TODAY — SHIPS OUT TOMORROW!
www.
.com
AIH Order Desk
(907) 276-7201
1-800-478-7201
521
Outdoor Equipment
Geological Picks
Mini Tillers
Groundbreakers®
xScoop Shovels
Poly Blade
GRT80030
GRT80080
Poly #12, heavy duty grain scoop with premium ash handle.
Mfg.
Order
Blade Dim.
Handle
No.
No.
In.
Lgth. In.
GPG12DU
GPG12LU
GRT80030
GRT80080
14-1/2 x 18-1/2
14-1/2 x 18-1/2
30-1/4
48
For light maintenance work. Tine end can
be used for shallow digging to clear gardens
or camping areas. Mattock end smooths
excavated areas and chops through roots.
Designed for one-handed use with minimal
fatigue.
Mfg.
No.
Order
No.
GP100 ESTGP100
3
4-1/2
4
25
14
Rock Picks
Blade
Tine
Wt.
Width In. Lgth. In. Lbs.
862-03/MTG VHN86203
Scoop Shovels
Pick features all steel construction and head
with pointed edge and chisel edge. Includes
durable powder coated finish and textured
vinyl grip for added comfort.
Mfg.
Order
Head
Overall
Head
No.
No.
Wt. Lbs. Lgth. In. Lgth. In.
1.8
Mini Planters
Aluminum Blade — Long Handle
Groundbreakers®
Pointed tip.
Mfg. No.
E3-22P
#12 grain scoop with aluminum blade, natural finish and long premium ash handle.
Mfg.
Order
Blade
Handle
No.
No.
Dim. In.
Lgth. In.
GAG10LU
GRT80079
13-3/8 x 18-1/4
Head Wt. Oz. Lgth. In.
22
13
Gold Pans
Plastic
For planting bulbs, plants, bushes and annuals. Features pick end for breaking up soil
and planter end for creating holes. Ergonomic design with cushion grip.
Stinger®
Mfg.
No.
Order
No.
Planter
Pick
Wt.
Width In. Lgth. In. Lbs.
864-03/MPLG VHN86403
Features heavy-duty fiberglass handle with
cushioned D-grip for maximum comfort. Aluminum alloy blade gives strength and balance.
Mfg.
Order
Blade
Handle
No.
No.
Dim. In.
Lgth. In.
AMS16719
ESTE322P
48
Scoop Shovels
1671900
Order No.
15-1/4 x 19
3
4-3/8
1.9
Plastic gold pans are rust proof, chemical resistant and lightweight. Black.
Mfg. No.
Mattock Picks
Groundbreakers® Handy Series
BP-12
BP-14
Order No.
Dia. In.
ESTBP12
ESTBP14
12
14
Trenchers
Groundbreakers®
29
Scoop Shovels
Aluminum
Alloy blade with wood handle. Cushioned Dshaped grip. 27" handle length.
Mfg. No.
1670900
1681400
522
Order No.
AMS16709
AMS16814
Head Dim. In. W x L
GHD Order Desk
(907) 279-6691
1-800-478-4393
14-3/4 x 18
15-3/4 x 20
For installing lawn irrigation systems, landscape lighting, stone pavers and other light
construction applications. 2-lb. head for
breaking up hardened soil. Use mattock end
for clearing, edging and root chopping.
Mfg.
No.
Order
No.
851-01/HMP VHN85101
Pick
Mattock Lgth. Handle
Width In. In. Lgth. In.
2-1/4
ORDER ONLINE TODAY — SHIPS OUT TOMORROW!
www.ghdalaska.com
4-1/2
26
Features 4.5-lb. head with pick end for loosening hardened soil, mattock end for digging
and trenching. Curved hickory handle requires less bending for shallow digging.
Mfg.
Order Mattock Pick
Handle
No.
No.
Width In. Lgth. In. Lgth. In.
856-01/TR VHN85601
2192 VIKING DRIVE
ANCHORAGE, AK 99501
3
7
36
GENERAL HARDWARE
DISTRUBUTORS
Outdoor Equipment
Landscaping Axes
Axe Handles
Manure Forks
Fiberglass
For use with single bit 3- to 5-lb. tools.
Features hickory handle.
Mfg.
No.
1188800
Order
No.
Head
Wt. Lbs.
Handle
Lgth. In.
AMS11888
3.75
36
Mfg. No.
Order No.
2063700
AMS20089
Lgth. In.
36
Features 5-tine design with 48" wood handle.
Epoxy Kits
Mattock Heads
Designed for installation
of fiberglass or wooden
tool handles. Can be used
for sledge and other hammers, axes and splitting
mauls For installation of
fiberglass or wooden tool
handles.
AMS11354
Mfg. No.
Order No.
3010600
AMS30106
Desc.
FiberPro® handle epoxy kit
Mfg.
No.
Order
No.
Tine
Lgth. In.
Tine
Dim. In.
163033700
AMS03798
12
12 x 8-3/4
Manure Forks
Forged steel head with five oval tines. Bent
pattern.
Mfg.
No.
Order
No.
Tine
Head
Handle
Lgth. In. Width In. Lgth. In.
18233
AMS18233
12
8-3/4
48
Digging Forks
5 lbs. 6" eye.
Mfg. No.
Order No.
1135400
1136500
AMS11354
AMS11365
Classic
Tampers
AMS11365
Desc.
Structron tamper with 8" x 8"
cast iron head. Fiberglass handle. Compacts loose soil, sand,
and stone.
Mfg.
Order
Handle
No.
No.
Lgth. In.
Cutter
Pick
Clay Pick Heads
TP-8FG
SEYTP8FG
44
Hardwood handle with steel and wood Dgrip. Forged steel head with 8" ferrule. Limited 10-year warranty.
Mfg.
No.
Order
No.
Tine
Lgth. In.
Head
Width In.
163034100
AMS16304
9-1/2
6
Potato Hooks
6" eye.
Mfg. No.
Order No.
1137800
1138700
AMS11378
AMS11387
Wt. Lbs.
Box/Hay Hooks
5
6
Constructed of bright
finish round steel.
Round hardwood handle.
Pick Handles
36" length. Fits 5 – 7-lb. heads with 6" eye.
Mfg. No.
Order No.
2027400
AMS20274
Desc.
FiberPro® with handle guard
Mfg. No.
1
Order No.
Lgth. In. Hook Dia. In.
OSB1
8
Forged steel 4-tine head with 5" ferrule.
Wood handle.
Mfg.
No.
Order
No.
1804300
AMS18043
7/16
Head Dim. In. Handle
WxL
Lgth. In.
6-1/2 x 6-1/4
54
Cultivators
Classic
Digging Tool Handles
Boning Hooks
Pick & Mattock
Hardwood handle with forged steel head.
Limited 10-year warranty.
For 5-lb. and heavier picks or mattocks eye
3" x 2". No. 6 eye.
Mfg. No.
68362
Order No.
VHN68362
Lgth. In.
ALASKA INDUSTRIAL
HARDWARE, INC.
36
Mfg. No.
09153/S194H
Order No.
SEA09153
Dim. In. L x Dia.
5-1/2 x 1/4
Mfg.
No.
Order
No.
No.
Tines
Handle
Lgth. In.
163034000
AMS03799
4
48
ORDER ONLINE TODAY — SHIPS OUT TOMORROW!
www.
.com
AIH Order Desk
(907) 276-7201
1-800-478-7201
523
Outdoor Equipment
Chipper/Shredders
Bow Rakes
Tow-Behind
Asphalt Rakes
Classic
Jackson® J-450™
Welded construction with 48" hardwood handle. Limited 10-year warranty.
Mfg.
Order
Head
No.
No.
No.
Width In.
Tines
Light pattern. Features forged steel head,
chrome steel ferrule, 1/2" shank and 60" long
handle.
Mfg.
Order
Head
No.
No.
No.
Width In.
Teeth
18494
AMS18494
14
14
1887100
Garden Rakes
Eagle
CS13
Order No.
HP
Chipping Cap. In.
GLOCS13
13
3-1/2
14
Lawn Rakes
Eagle
4-stroke OHV gasoline engine. Either pull by
hand or tow-behind a lawn tractor or ATV.
Mfg. No.
15.5
AMS18871
Welded bow. Wood handle.
Mfg.
Order
Head
No.
No.
Width In.
1881600
Garden Rakes
AMS18816
Handle
Lgth. In.
14
54
1926000
Thatching Rakes
Pony®
Polypropylene construction.
Mfg.
Order
Head
No.
No.
Width In.
Lawn-Groom
®
AMS19260
22
Handle
Lgth. In.
48
Rakes
Kodiak® — Steel
One-piece forged steel bow. Wood handle.
Mfg.
No.
Order
No.
Head
Width In.
Handle
Lgth. In.
1886300
AMS18863
16-3/4
60
Head adjusts up or down to suit height of
user.
Mfg.
Order
Head
Handle
No.
No.
Width In.
Lgth. In.
1914000
AMS19140
15
54
1935900
Landscape Rakes
Garden Rakes
Features 22 flexible one-piece steel tines.
Heavy-duty bolted construction.
Mfg.
Order
Head
Handle
No.
No.
Width In.
Lgth. In.
14
14
Aluminum construction with round-tipped
teeth to prevent gouging of lawn. Fully assembled.
Mfg. No.
Order No.
Head Width In.
61024A
61036A
Bow Rakes
524
GHD Order Desk
(907) 279-6691
1-800-478-4393
14
24
36
1935000
14
AMS18805
15-1/2
ORDER ONLINE TODAY — SHIPS OUT TOMORROW!
www.ghdalaska.com
22
48
Eagle
Chrome-plated steel ferrule. Forged steel
head with 14 teeth.
Mfg.
Order
Head
Handle
No.
No.
Width In.
Lgth. In.
1880500
AMS19350
Rakes
Pony®
Welded construction. 53" lightweight fiberglass handle.
Mfg.
Order
Head
No.
No.
No.
Width In.
Tines
AMS18880
AMS61024A
AMS61036A
Poly head with replaceable flat steel tines.
Flexible coil spring.
Mfg.
Order
Head
Handle
No.
No.
Width In.
Lgth. In.
Road Rakes
Eagle
188800
54
Poly/Steel
Features one-piece forged steel head and
60" seal-coated white ash handle.
Mfg.
Order
Head
No.
No.
No.
Width In.
Tines
AMS18867
22
Lawn Rakes
Jackson® J-250™
1886700
AMS19359
66
Spring-braced design. 22 tines.
Mfg.
Order
Head
No.
No.
Width In.
1932800
2192 VIKING DRIVE
ANCHORAGE, AK 99501
AMS19328
22
Handle
Lgth. In.
48
GENERAL HARDWARE
DISTRUBUTORS
Outdoor Equipment
Lawn Rakes
Tree Trimmers
Industrial Hoes
Greensweeper®
True Cut
Pony — Mortar Mixer
®
Features fiberglass pole, TFE-coated blade
and compound-action head with double pulleys. Cushion handle grip.
Mfg.
Order
Blade Cutting
Pole
No.
No.
Lgth. In. Cap. In. Lgth. Ft.
Perforated blade with wood handle.
Polypropylene construction.
Mfg.
Order
Head
No.
No.
Width In.
1920000
1923000
AMS19200
AMS19230
Handle
Lgth. In.
24
30
48
48
Mfg.
No.
Order
No.
Head Dim. In.
WxL
Handle
Lgth. In.
1866700
AMS18667
9x6
66
2328530 AMS23285
14
1-1/4
12
Pruners
Garden Hoes
Kodiak®
Ashpalt Lutes
Heavy Duty
Forged steel shank-pattern head. Wood
handle.
Lightweight, rugged, magnesium asphalt lute
with strength and spring of steel and one
third lighter than aluminum. Bar is joined to
the handle with heavy duty casting that creates a ridgid connection.1-1/4" x 6'9" handle.
Mfg. No.
Order No.
Width In.
307-LS
367-LS
427-LS
SUR307LS
SUR367LS
SUR427LS
Mfg.
No.
Order
No.
Head Dim. In.
WxL
Handle
Lgth. In.
1849000
AMS18490
6-1/4 x 4-1/4
52
Garden Hoes
30
36
42
AMS23431
8
5/8
Pruners
Back Yard Pro™ anvil pruner with vinyl grips.
Mfg.
Order
Lgth.
Cutting
No.
No.
In.
Cap. In.
AMS18501
23052-00
AMS23052
7-1/2
1/2
Pruners
AMS18599
Surfa Slick
36-LS
2343130
Eagle
Asphalt Lute Bars
Mfg. No.
Forged bypass pruner with grips.
Mfg.
Order
Lgth.
Cutting
No.
No.
In.
Cap. In.
AMS18501: Welded blade with wood handle.
AMS18599: Fiberglass handle.
Order No.
Width In.
SUR36LS
36
Mfg.
No.
Order
No.
Blade
Size In.
Handle
Lgth. In.
1850100
1859900
AMS18501
AMS18599
6-1/2 x 3-1/2
6-1/2 x 4
48
47
Lute Bar Holder Sets
Professional large, forged bypass pruner
features forged high carbon steel blades,
forged handles with textured comfort grips,
internal spring, and patent pending Total
Control Ring.
Mfg.
Order
Lgth.
Cutting
No.
No.
In.
Cap. In.
Grass/Weed Cutters
Surfa Slick
2353400
AMS23534
8
1
Pruners
Mfg. No.
125-LH
Order No.
SUR125LH
Long Handle
For Lute Bar Size In.
1-1/4
AMS19450
Surfa Slick
1945000
Mfg. No.
725-L
Order No.
SUR725L
Dia. In.
1-1/4
ALASKA INDUSTRIAL
HARDWARE, INC.
AMS19426
Serrated double-edge blade. Heavy duty
steel straps.
Mfg.
Order
Head Dim. In. Handle
No.
No.
WxD
Lgth. In.
Asphalt Lute Poles
Lgth. In.
81
1942600
Weed Cutter
AMS19450
14 x 2-/12
Grass Whip
AMS19426
9-1/4 x 1-1/2
30
38
Professional heavy-duty forged bypass lopper features forged high carbon steel blades,
steel handles, and tri-lobe shaped grips for
comfort and control.
Mfg.
Order
Lgth.
Cutting
No.
No.
In.
Cap. In.
23542-00
AMS23542
ORDER ONLINE TODAY — SHIPS OUT TOMORROW!
www.
.com
34
AIH Order Desk
(907) 276-7201
1-800-478-7201
3
525
Outdoor Equipment
Contractor Wheelbarrows
Utility Carts
Big Wheel
Garden Cultivators
Hand-Held
Features polypropylene and TPE grip with
gel insert, stainless steel head, and convenient hand-up hole. Used to loosen packed
soil and to rake and smooth soil in beds and
planters.
Mfg. No.
1984800
Order No.
OAL In.
AMS19848
11-1/2
Garden Weeders
For construction or commercial applications.
Constructed from structural foam; will not
dent, rust, chip or peel. Seamless pan design
resists cracking and leaking. Holds up to 7.5
cu. ft.
Carts
Mfg.
Order
Dim. In.
Cap.
No.
No.
LxWxH
Lbs.
FG564200BLA
Hand-Held
RUB5642
57-1/2 x 32-3/4
x 28-1/4
Features heavy gauge seamless steel tray,
front braces, H-brace, leg stabilizers and
steel cross strips. 16" wheel assembly with
flat-free tire. Steel tray braces provide extra
support when pouring heavy loads.
Mfg. No.
Order No.
Cap. Cu. Ft.
404066
JAK404066
6
Wheelbarrows
300
Accessories
Mfg. No.
Order No.
Desc.
M1564200
RUBM15642
Replacement wheel
Features polypropylene and TPE grip with
gel insert, stainless steel head, and a convenient hang-up hole. Used for weeding and
small root removal.
Mfg. No.
Order No.
OAL In.
19848900
AMS19849
14
Contractor Wheelbarrows
Super Heavy Duty
Heavy duty, corrosion-resistant poly tray.
Steel front tray braces, cross strips, leg stabilizers and H-brace. 16" wheel assembly with
pneumatic 2-ply tire.
Garden Trowels
Hand-Held
Mfg. No.
Order No.
Cap. Cu. Ft.
234066
JAK234066
5-3/4
Wheelbarrows
Features polypropylene and TPE grip with
gel insert, stainless steel head, and a convenient hang-up hole. Used for planting,
transplating, weeding, moving, and smoothing soil.
Mfg. No.
Order No.
OAL In.
1984600
AMS19846
13-1/2
Grass Shears
Features heavy duty steel tray and professional grade steel undercarriages. Patented
leg stabilizers make wheelbarrow 40% more
tip resistant. 16" flat free knobby tires with
ball bearing and 60" heavy duty steel handles.
Mfg. No.
Order No.
Cap. Cu. Ft.
M6SFFKB
JAK01935
6
Contractor Wheelbarrows
True Cut
Heavy gauge seamless steel tray with heavy
duty steel braces, H-brace, cross strips and
legs shoes. 16" wheel assembly with pneumatic 2-ply tire.
Mfg. No.
Order No.
Cap. Cu. Ft.
22U4066
JAK22U4066
6
Wheelbarrow Handles
Heat-treated carbon steel blades are bevelground and feature non-stick TFE coating.
Soft vinyl grips.
Features corrosion-proof poly tray with steel
front braces, cross braces and shoes. 16"
wheel assemblies with 2-ply tires.
Mfg. No.
Order No.
Desc.
23439
Mfg. No.
Order No.
Cap. Cu. Ft.
AMS23028
Grass shears
BP10/244066
JAK244066
10
526
GHD Order Desk
(907) 279-6691
1-800-478-4393
ORDER ONLINE TODAY — SHIPS OUT TOMORROW!
www.ghdalaska.com
5-ft. long, 1-7/16" x 1-3/4". Grip shaped end.
Unbored.
Mfg. No.
79202
2192 VIKING DRIVE
ANCHORAGE, AK 99501
Order No.
VHN79202
Desc.
Clear waterproof finish
GENERAL HARDWARE
DISTRUBUTORS
Outdoor Equipment
Wheelbarrows
Single Wheel
Tire Tubes
Tires
Wheelbarrow
Flat-Free
Features heavy duty forged steel undercarriage with unique extra braces for enhanced
stability. Includes ball bearing wheel with
grease fittings and custom powder coated
steel for maximum durability.
SCESRLJ1T:
32" wide tray easily fits
through gates and stall doors, and is designed to virtually eliminate spills.
Mfg. No.
Order No.
Cap. Cu. Ft..
SR7-1T
SRLJ-1T
SCESR71T
SCESRLJ1T
FAU009709
Pre-treated with Slime® tire sealant compound to help prevent leaks. Lasts up to two
years.
Mfg.
Order
Tube
Fits Tire
No.
No.
Size In.
Size
7
10
30010
30011
30012
Wheelbarrows
Double Wheel
FAU44499
Features heavy duty forged steel undercarriage with unique extra braces for enhanced
stability. Double wheel model moves larger
loads with stability and less effort. Includes
ball bearing wheels with grease fittings and
custom powder coated steel for maximum
durability.
Mfg. No.
Order No.
SRLJ-2K
SCESRLJ2K
Cap. Cu. Ft..
10
SLM00096
SLM00094
SLM00095
4
6
8
4.00/3.5-4"
4.10/3.50 – 6"
4.80/4.00 – 8"
Tubeless Tires
Polyurethane foam construction eliminates
flats while providing the bounce and loadhandling features of conventional air-filled
tires. Features dense, non-marking outer
skin for abrasion and chemical resistance.
Pneumatic
FAU009709: Ribbed tread. For wheelbarrows, welders and utility carts. Capacity exceeds 500 lbs.
FAU44499: Sawtooth tread. For hand trucks,
pressure washers, walk-behind blowers and
generators. 300-lb. capacity.
Mfg.
No.
Order
No.
I84-16-4.80/4.0 FAU009709
009706 I84-10
FAU44499
Tire
Size
4.80/4.00
– 8"
4.10/3.50
– 4"
Dia. Width
In.
In.
16
4
10.5
3
Fits most 8" wheelbarrow rims. Rubber construction with ribbed tread pattern.
Mfg.
Order
Dia.
Tire
No.
No.
In.
Size
20002
8
MRT20002
Wheelbarrow Liners
4.80/4.00 – 8"
Inner tubes
Wheelbarrow Tires
Durable, lightweight design fits most 6 cubic
foot wheelbarrows. Liner acts as a protective layer by mimicking the shape and size
of the wheelbarrow body. Enables the mixing
of concrete, mortar, and other cement based
products without contaminating the batch
with old .debris. Smooth surface allows for
easy clean up and installation. Can also be
utilized as a large stand alone tub.
Mfg. No.
POLY LINER
Order No.
WHELINER
Dim. Cu. Ft.
ALASKA INDUSTRIAL
HARDWARE, INC.
6.
2-ply wheelbarrow tire.
Mfg.
Order
Tire
No.
No.
Size
20042
MRT20042
4.00 – 6"
Dia. Width
In.
In.
16
6
Features valve stem for easy inflation.
Mfg.
Order
Dia.
Fits Tire
No.
No.
In.
Size
20993
MRT20993
ORDER ONLINE TODAY — SHIPS OUT TOMORROW!
www.
.com
6
4.80/4.00 – 8"
AIH Order Desk
(907) 276-7201
1-800-478-7201
527
Outdoor Equipment
SUV/Truck Shelters
Garage-In-A-Box®
RV Shelters
Peak Style
Portable Greenhouses
Organic Growers Greenhouse®
All-steel DuPont™ thermoset baked on
powder-coated finish resists rust and corrosion. ShelterLock™ stabilizer block at every
rib connection adds rock-solid strength and
stability to frame. Bolt-together hardware at
every connection point ensures maximum
strength and durability. Ratchet Tite™ tension system and Easy-Glide Sliding Cross
Rails™ keep the cover smooth and taut.
Advanced engineered, commercial grade
polyethylene woven fabric is UV treated inside and out to stand up to the elements.
Universal steel foot plates provide easy and
solid connection to ground anchors, cement
or pony walls. Door opening dimensions: 12
ft. 6" high, 10 ft. wide.
Mfg.
No.
Order
No.
Frame
Dia. In.
Dim. Ft.
WxLxH
95844
SHL95844
2-3/8
14 x 40 x 16
Features reinforced roof rafter design for
overall strength and advanced engineered
fabric that is UV treated inside, outside, and
in between with added fade blockers, antiaging, anti-fungal, and anti-yellowing agents,
alpine design frame, ShelterLock™ stabilizers, easy slide cross rail, and Ratchet Tite™
cover tensioning. Door measures from 10' 4"
bottom width with 8' top width, 8' peak height,
and 6' height.
Includes: double zippered front door panel,
solid rear door panel, cover, 24-ShelterLock™ stabilizing blocks, roll-up door kit,
6-15" auger anchors, 8-steel foot plates,
8-Ratchet Tite™ ratchets, and set of step-bystep instructions.
Mfg.
Order
OAL Dim. Ft.
No.
No.
LxWxH
62695
SHL62695
20 x 13 x 12
High density mesh polyethylene fabric
blocks harmful UVA and UVB rays. Durable
steel frame with wing nuts and bolts at every
connection for easy set-up. One piece fitted
mesh scrim cover with double-zippered door
and half-moon zippered screens on both end
panels for adjustable airflow and quick-snap
roll-up side panels for ultimate temperature
control. Includes EasyHook™ drive anchors
and 24 bungee fasteners. All steel 1-3/8"
frame with DuPont™ Premium powder-coat
finish.
Mfg.
No.
70625
Portable Garages
Order
No.
Dim. Ft.
LxWxH
SHL70625
8 x 6 x 6-1/2
Insulated Shelters
Alaskan Series — Garage-in-a-Box®
SUV/Truck Shelters
Alaskan Series — Sheltertube®
Heavy duty 9 oz. triple layer polyethylene is
UV treated and waterproof. Industrial grade
square tube frame with DuPont™ premium
powder coat provides strength and durability. Reinforced top rails and bolt connection
ensure maximum stability. Includes double
zipper door panels and roll-up door kits.
When installed I.A.W. instructions and building codes, this shelter is snow load rated at
43 PSF and wind speed rated at 80 MPH.
Mfg.
No.
Order
No.
Dim. Ft.
LxWxH
62826
SHL62826
20 x 12 x 11
528
GHD Order Desk
(907) 279-6691
1-800-478-4393
Great for autos, motorcycles, ATVs, trailers,
lawn/garden, tractors, snowmobiles, bulk
storage, and more. All steel frame with DuPont™ thermoset baked-on, powder coat finish will not chip, peel, rust or corrode. 6 rib/4ft. spacing design delivers strength, ease
of installation, and portability. Triple-layer,
ripstop fabric is 100% waterproof. Enhanced
weave polyethylene cover is UV treated inside and out. Bolt together hardware at every roof joint connection. Easy Slide Cross
Rail™ system locks down and squares up
frame. ShelterLock™ stabilizers deliver a
stable, more durable shelter. Ratchet Tite™
tensioning for solid cover anchoring. Door
dimensions: 5'9" high, 10" wide (bottom) and
8 '6". wide (top).
Mfg.
Order
Frame
Dim. Ft.
No.
No.
Dia. In.
WxLxH
62793
SHL62793
1-3/8
ORDER ONLINE TODAY — SHIPS OUT TOMORROW!
www.ghdalaska.com
12 x 20 x 8
Frame is made of white 1 3/8" DuPont powder coated tubular steel. Triple-layer ripstop
white polyethylene cover is fire resistant,
UV treated and water resistant designed for
multiple weather conditions. One-piece Polyethylene floor creates vapor barrier. Insulation cover designed with three layers: R-11
rated insulation cover consists of 3 layers; 1"
layer of polyester encased between a layer
of high-tech reflective aluminum and fire retardant UV treated polyethylene. Insulation
cover can be removed as climates and seasons change. Includes hardware kit and four
15" auger anchors.
Mfg.
No.
Order
No.
Dim. Ft.
LxWxH
23595WTBD
SHL23598
12 x 12 x 8
2192 VIKING DRIVE
ANCHORAGE, AK 99501
GENERAL HARDWARE
DISTRUBUTORS
Outdoor Equipment
Heavy duty 1-5/8" diameter steel frame is
bonded with Dupont thermoset baked on
powder coat finish that prevents chipping,
peeling, rust and corrosion. Triple-layer polyethylene rip stop weave fabric cover is hot
air fused at the seams and 100% waterproof.
UV-treated inside and out with added fade
blockers, anti aging, anti-fungal agents. Includes roll-up door kit, 14 ShelterLock™ stabilizer blocks, 8 Ratchet Tite™ ratchets and
8 15" ShelterAuger™.
Mfg.
No.
Order
No.
Dim. Ft.
LxWxH
62768
SHL62768
24 x 12 x 10
Pop-Up Canopies
Portable Greenhouses
Round Style Shelters
w/ Screen Kit
Greenhouse-in-a-Box®
All steel frame, bonded with DuPont™ thermoset baked on, powder coat finish prevents chipping, peeling, rust and corrosion.
Clearview triple-layer, ripstop translucent
fabric is waterproof and UV treated inside
and out. and provides enhanced illumination designed specifically for plant growth
and protection. Bolt together hardware at every roof joint connection. Easy Slide Cross
Rail™ system locks down cover and squares
up frame. ShelterLock™ stabilizers ensure
rock solid stability. Delivers a stable, more
durable shelter. Ratchet Tite™ tensioning for
solid cover anchoring. 1-3/8" all steel frame.
Mfg.
Order
Door
Dim. Ft.
No.
No.
Frame Dim.
WxLxH
70607
SHL70607
7'4" x 40"
12 x 12 x 8
70608
SHL70608
6'10" x 40"
10 x 20 x 8
Water-resistant, UV-treated polyester cover.
Collapsible square tube frame with pull-pin
rings and two-point height adjustable legs.
Includes set of 4 temporary spike anchors
and rugged wheeled storage bag. High quality screen material with zippered door entry
and tie back options. Desert Bronze. Bonus
4 canopy anchor bags.
Mfg.
No.
Order
No.
Dim. Ft.
LxWxH
22660
SHL22660
10 x 10 x 6-1/4
Pop-Up Canopies
Slant Leg
Portable Sheds
Shed-in-a-Box®
Garage Shelters
Roundtop®
All steel square tube quick collapsible frame,
one-piece fitted polyester fabric cover, set
of four temporary spike anchors, and heavy
duty wheeled storage carry bag.
Mfg.
No.
22591
Commercial grade polyethylene woven fabric is UV-treated inside and out and designed
to endure harsh weather environments Features Ratchet Tite™ tension system to keep
the cover smooth and taught. All-Steel DuPont™ premium powder coated finish resists
rust and corrosion. ShelterLock® steel stabilizers at every rib connection add stability to
the frame. Every connection point is bolted
to ensure maximum durability.Universal steel
foot plates for easy and solid connection to
ground anchors, cement or pony walls.
Mfg.
No.
62668
Order
No.
SHL62668
Dim. Ft.
LxWxH
24 x 13 x 10
ALASKA INDUSTRIAL
HARDWARE, INC.
Designed for easy set-up and portability. Built
with high-grade steel, every frame tube and
connector goes through a proprietary 13-step
Rhino Shield surface preparation process. All
steel frame with compact 3-rib design, bonded with DuPont™ thermoset baked on powder-coated finish prevents chipping, peeling,
rust and corrosion. The ShelterLock™ stabilizers ensure rock solid stability. Triple-layer,
heat bonded, rip-stop, waterproof, enhanced
weave polyethylene cover, UV-treated inside
and out with added fade blockers, anti-aging,
antifungal agents resulting in a cover that
withstands the elements. Rugged Ratchet
Tite™ tensioning system provides simple installation while keeping cover tight to frame.
Door dimensions: 6'3" high, 8'6" wide (bottom) and 7'4". wide (top).
Mfg.
Order
Frame
Dim. Ft.
No.
No.
Dia. In.
WxLxH
70734
SHL70734
1-3/8
10 x 10 x 8
Order
No.
SHL22591
10 x 10 x 6-1/4
Color
Blue
Pop-Up Canopies
Pro
One piece, fitted polyester fabric cover with
full valance and easy hook and loop fasteners. Expandable square tube steel frame features pull-pin ring and 2-point height adjustable legs. Includes set of 4 temporary spike
anchors and heavy duty wheeled storage
carry bag.
Mfg.
Order
Dim. Ft.
No.
No.
L x W x H Color
22642
SHL22642
ORDER ONLINE TODAY — SHIPS OUT TOMORROW!
www.
Dim. Ft.
LxWxH
.com
12 x 12 x 10
AIH Order Desk
(907) 276-7201
1-800-478-7201
Green
529
Outdoor Equipment
Portable Shelter Vents
ShelterVent™
Reduce humidity and moisture buildup in
fabric garage or storage shelter. High-quality,
impact-resistant polyurethane vents are fully
screened to allow air in while turning away
bugs and debris. Easy installation with twosided plastic pop rivets for an airtight seal.
Rip-stop fabric is engineered for vent install
without further ripping or tearing of fabric.
ShelterVent™ works with any fabric covered
instant garage or storage shelter. Includes
two screened vents.
Mfg. No.
Order No.
Desc.
10031
SHL10031
Vent kit
Roll-Up Door Kits
Allows quick access to sheds, shelters and
instant garages. Fits all double-zippered
door garages, sheds and shelters. Neatly
stores door when open. Includes roll-up
pocket pipe, pulleys, rope and all hardware.
Mfg. No.
Order No.
Desc.
10077
SHL10077
Door kit
530
GHD Order Desk
(907) 279-6691
1-800-478-4393
NOTES
____________________________
____________________________
____________________________
____________________________
____________________________
____________________________
____________________________
____________________________
____________________________
____________________________
____________________________
____________________________
____________________________
____________________________
____________________________
____________________________
____________________________
____________________________
____________________________
____________________________
____________________________
____________________________
ORDER ONLINE TODAY — SHIPS OUT TOMORROW!
www.ghdalaska.com
2192 VIKING DRIVE
ANCHORAGE, AK 99501
GENERAL HARDWARE
DISTRUBUTORS