Sharp LC-20B8U Specifications

MODE D’EMPLOI
MANUAL DE OPERACIÓN
LIQUID CRYSTAL TELEVISION
TÉLÉVISEUR ACL
TELEVISOR CON PANTALLA DE
CRISTAL LÍQUIDO
TELEVISOR DE CRISTAL
LÍQUIDO
Sharp Plaza, Mahwah, New Jersey 07430-2135
SHARP CORPORATION
MANUAL DE OPERAÇÃO
OPERATION MANUAL
MODE D’EMPLOI
MANUAL DE OPERACIÓN
MANUAL DE OPERAÇÃO
Printed in Mexico
Imprimé au Mexique
Impreso en México
Impresso no México
Products that have earned the ENERGY STAR® are designed to protect the environment
through superior energy efficiency.
Les produits agréés ENERGY STAR® sont conçus pour protéger l’environnement par un
rendement énergétique supérieur.
TINS-B774WJZZ
05P04-MX-NM
LC-20B8U_E_Hyo1_4.p65
1
05.2.4, 5:49 PM
PORTUGUÊS
ESPAÑOL
OPERATION MANUAL
SHARP ELECTRONICS CORPORATION
FRANÇAIS
ENGLISH
LC-20B8U
LC-20B8U
ENGLISH
FRANÇAIS
LC-20B8U
LIQUID CRYSTAL TELEVISION
ESPAÑOL
ENGLISH
OPERATION MANUAL
IMPORTANT:
To aid reporting in case of loss or theft, please record the
TV’s model and serial numbers in the space provided. The
numbers are located at the rear of the TV.
Model No.:
Serial No.:
U.S.A. ONLY
IMPORTANT INFORMATION
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS PRODUCT TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrow-head symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within a triangle is
intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature accompanying
the product.
The enclosed RGB cable and AC cord must be used with the device. The cables are provided to ensure that the device
complies with FCC Rules.
U.S.A. ONLY
1
LC-20B8U_E_P01-02.p65
1
05.2.14, 1:00 PM
IMPORTANT INFORMATION (Continued)
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT.
CAUTION:
DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART, STAND, TRIPOD, BRACKET, OR TABLE.
THE PRODUCT MAY FALL CAUSING SERIOUS PERSONAL INJURY AND SERIOUS DAMAGE TO
THE PRODUCT. USE ONLY WITH A CART, STAND, TRIPOD, BRACKET, OR TABLE RECOMMENDED
BY THE MANUFACTURER OR SOLD WITH THE PRODUCT. FOLLOW THE MANUFACTURER’S
INSTRUCTIONS WHEN INSTALLING THE PRODUCT AND USE MOUNTING ACCESSORIES
RECOMMENDED BY THE MANUFACTURER. A PRODUCT AND CART COMBINATION SHOULD
BE MOVED WITH CARE. QUICK STOPS, EXCESSIVE FORCE, AND UNEVEN SURFACES MAY CAUSE
THE PRODUCT AND CART COMBINATION TO OVERTURN.
WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly
approved by the manufacturer could void the user’s authority to operate this equipment.
U.S.A. ONLY
DECLARATION OF CONFORMITY
SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-20B8U.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
RESPONSIBLE PARTY:
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-2135
TEL: 1-800-BE-SHARP
For Business Customers: URL http://www. sharpusa. com
U.S.A. ONLY
INFORMATION:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
U.S.A. ONLY
“Note to CATV system installer: This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National
Electrical Code that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the
grounding system of the building, as close to the point of cable entry as practical.”
U.S.A. ONLY
This product utilizes tin-lead solder, and fluorescent lamp containing a small amount of mercury. Disposal of these materials
may be regulated due to environmental considerations. For disposal or recycling information, please contact your local
authorities or the Electronic Industries Alliance: www.eia.org
2
LC-20B8U_E_P01-02.p65
2
05.2.14, 1:00 PM
IMPORTANT SAFETY PRECAUTIONS (Continued)
■ Cleaning—Unplug the AC cord from the AC outlet before cleaning the product.
Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol
cleaners.
■ Water and moisture—Do not use the product near water, such as bathtub,
washbasin, kitchen sink and laundry tub, swimming pool and in a wet basement.
■ Stand—Do not place the product on an unstable cart, stand, tripod or table.
Placing the product on an unstable base can cause the product to fall, resulting in
serious personal injuries as well as damage to the product. Use only a cart,
stand, tripod, bracket or table recommended by the manufacturer or sold with the
product. When mounting the product on a wall, be sure to follow the manufacturer’s instructions. Use only the mounting hardware recommended by the manufacturer.
■ When relocating the product placed on a cart, it must be moved with utmost care.
Sudden stops, excessive force and uneven floor surface can cause the product to
fall from the cart.
■ Ventilation—The vents and other openings in the cabinet are designed for
ventilation. Do not cover or block these vents and openings since insufficient
ventilation can cause overheating and/or shorten the life of the product. Do not
place the product on a bed, sofa, rug or other similar surface, since they can
block ventilation openings. This product is not designed for built-in installation; do
not place the product in an enclosed place such as a bookcase or rack, unless
proper ventilation is provided or the manufacturer’s instructions are followed.
■ The Liquid Crystal panel used in this product is made of glass. Therefore, it can
break when the product is dropped or applied with impact. Be careful not to be
injured by broken glass pieces in case the Liquid Crystal panel breaks.
■ Heat sources—Keep the product away from heat sources such as radiators,
heaters, stoves and other heat-generating products (including amplifiers).
■ The Liquid Crystal panel is a very high technology product with 2,359,296 thin film transistors, giving you fine picture
details.
Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red.
Please note that this does not affect the performance of your product.
4
LC-20B8U_E_P01-06.p65
4
05.2.3, 2:00 PM
Contents
IMPORTANT INFORMATION ............................................ 1
DEAR SHARP CUSTOMER .............................................. 3
IMPORTANT SAFETY PRECAUTIONS ............................ 3
Supplied Accessories ...................................................... 6
Preparation ....................................................................... 7
Installing Batteries in the Remote Control ................... 7
Using the Remote Control ........................................... 7
Antenna Connection ................................................... 8
Power Connection ....................................................... 9
Part Names of the Main Unit ......................................... 10
Listening with Headphones ....................................... 10
How to Fix the Cables ............................................... 11
Part Names of the Remote Control ............................... 12
TV Signals in Your Region ............................................. 12
EZ SETUP (With AUTO CLOCK Setting) ...................... 13
EZ SETUP during the First Power On ........................ 13
Setting the CLOCK ......................................................... 14
AUTO CLOCK Setting ............................................... 14
MANUAL CLOCK Setting .......................................... 14
TIME DISPLAY ........................................................... 15
Basic Operation .............................................................. 15
Turning On and Off the Main Power .......................... 15
Standby ..................................................................... 15
Switching the Input Modes
(INPUT1/INPUT2/INPUT3/INPUT4/INPUT5(PC)/TV) ... 16
Sound Volume ........................................................... 16
Changing Channels .................................................. 17
Selecting Menu Items ................................................ 17
Basic Adjustment Settings ............................................ 19
AV MODE .................................................................. 19
OPC ........................................................................... 19
BACKLIGHT .............................................................. 20
PICTURE Adjustments .............................................. 20
COLOR TEMPERATURE ........................................... 21
I/P SETTING .............................................................. 21
NOISE CLEAN ........................................................... 21
FILM MODE ............................................................... 22
QUICK SHOOT .......................................................... 22
AUDIO Adjustments .................................................. 22
PC SOUND SELECT (for PC mode) .......................... 23
Useful Features .............................................................. 23
CH-SETTING ............................................................. 23
SETUP ....................................................................... 24
V-CHIP Settings ......................................................... 25
CLOSED CAPTION ................................................... 29
VIEW MODE .............................................................. 30
AUDIO ONLY ............................................................. 30
BLUE SCREEN .......................................................... 30
SLEEP TIMER ............................................................ 31
WAKE-UP TIMER ....................................................... 31
NO SIGNAL OFF ....................................................... 32
NO OPERATION OFF ................................................ 32
PICTURE FLIP ........................................................... 32
Connecting a PC ............................................................ 33
Viewing an Image from a PC ..................................... 33
Displaying an Image from a PC ................................ 33
INPUT SIGNAL (for PC mode) .................................. 34
FINE SYNC. Adjustments (for PC mode) .................. 34
POWER MANAGEMENT (for PC mode) .................... 35
PC Compatibility Chart .............................................. 35
Connecting External Devices ........................................ 36
Example of External Devices that can be Connected ....... 36
Outputting Video and Audio (Video Output) ............. 36
Connecting to the INPUT1/2/3/4/5 Terminals ............ 37
Troubleshooting ............................................................. 38
Specifications ................................................................. 40
Calling for Service .......................................................... 41
LIMITED WARRANTY ..................................................... 41
Dimensional Drawings
• The dimensional drawings for the LCD TV set are shown on
the inside back cover.
Supplied Accessories
Make sure the following accessories are provided with the LCD TV set.
Wireless remote control
AC cord
RGB cable
pages 7 and 12
page 9
page 33
“AAA” size batteries (×2)
Cable clamp
Operation manual
LC-20B8U
page 7
page 11
A
• The AC cord enclosed in this product is for 110-125V. For using it on the 125-240V AC, please consult the following.
SHARP ELECTRONICS CORPORATION 6100 Blue Lagoon Drive, Suite 230, Miami, Florida 33126, U.S.A.
6
LC-20B8U_E_P06.p65
6
05.2.14, 1:00 PM
Preparation
Installing Batteries in the Remote Control
Before using the LCD TV set for the first time, install the two “AAA” size batteries supplied in the remote control. When the
batteries become depleted and the remote control fails to operate, replace the batteries with new “AAA” size batteries.
1
Open the battery cover.
■ Slide the cover while
pressing the ( ) part.
2
Insert two “AAA” size batteries.
3
Close the battery cover.
■ Engaging the lower
claw with the remote
control, close the
cover.
■ Place batteries with their
terminals corresponding
to the (+) and (–)
indications in the battery
compartment.
Caution!
Precautions regarding batteries
■ Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the instructions below.
• Place batteries with their terminals corresponding to the (+) and (–) indications.
• Different types of batteries have different characteristics. Do not mix batteries of different types.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries and/or cause old
batteries to leak chemicals.
• Remove batteries as soon as they are depleted. Chemicals that leak from batteries can cause a rash. If chemical
leakage is found, wipe it off with a cloth.
• The batteries supplied with the LCD TV set may have a shorter operating time due to storage conditions.
• If the remote control is not to be used for a long period of time, remove the batteries from the remote control.
Using the Remote Control
■ Use the remote control by pointing it towards the remote sensor
window of the main unit. Objects between the remote control and
sensor window may prevent proper operation.
Headphone jack
OPC indicator
POWER/WAKE UP TIMER
indicator
Remote sensor
Cautions regarding use of the remote control
■ Do not apply shock to the remote control. In addition, do not
expose the remote control to liquids, and do not place it in an area
with high humidity.
OPC sensor
■ Do not install or place the remote control in direct sunlight. The
heat may cause deformation of the unit.
■ The remote control may not work properly if the remote sensor
window is in direct sunlight or strong lighting. In such a case,
change the angle of the lighting or main unit, or operate the
remote control closer to the remote sensor window.
7
LC-20B8U_E_P07-12.p65
7
05.2.14, 2:14 PM
Preparation (Continued)
Antenna Connection
ANTENNAS
• The antenna requirements for good color television reception are more important than those for black & white television reception.
For this reason, a good quality outdoor antenna is strongly recommended.
The following is a brief explanation of the type of connections that are provided with the various antenna systems.
F-type connector
1. A 75-ohm system is generally a round cable with F-type connector that can easily
be attached to a terminal without tools (not supplied).
75-ohm coaxial cable (round)
2. A 300-ohm system is a flat “twin-lead” cable that can be attached to a 75-ohm
terminal through a 300/75-ohm adapter (not supplied).
300-ohm twin-lead cable (flat)
OUTDOOR ANTENNA CONNECTION
• Use one of the following two diagrams if you connect an outdoor antenna.
A: Using a VHF/UHF combination outdoor antenna
B: Using separate VHF and/or UHF outdoor antennas
• Connect the outdoor antenna cable lead-in to ANT (Antenna terminal) on the rear of the main unit.
A. Combination VHF/UHF antenna
ANT
(Antenna terminal)
300/75-ohm
adapter
(not supplied)
VHF/UHF
antenna
VHF/UHF
antenna
or
300-ohm
twin-lead
75-ohm
coaxial cable
Antenna cable
(commercially available)
B. Separate VHF and/or
UHF antennas
UHF
antenna VHF
antenna
300-ohm
twin-lead
Combiner
(not supplied)
OUT
300-ohm
twin-lead
IN
75-ohm
or
coaxial cable
NOTICE
F-type connector
75-ohm coaxial cable
F-type connector should be finger-tightened only.
When connecting the RF cable to the LCD TV set, do not tighten F-type
connector with tools.
If tools are used, it may cause damage to your LCD TV set.
(breaking of internal circuit, etc.)
8
LC-20B8U_E_P07-12.p65
8
05.2.3, 2:01 PM
Preparation (Continued)
Antenna Connection (Continued)
CABLE TV (CATV) CONNECTION
• A 75-ohm coaxial cable connector is built into the LCD TV set for easy hookup. When connecting the 75-ohm
coaxial cable to the LCD TV set, screw the 75-ohm cable to the ANT terminal.
• Some cable TV companies offer “premium pay channels”. Since the signals of these premium pay channels are
scrambled, a cable TV converter/descrambler is generally provided to the subscriber by the cable TV company.
This converter/descrambler is necessary for normal viewing of the scrambled channels. (Set your TV to channel 3
or 4, typically one of these channels is used. If this is unknown, consult your cable TV company.) For more specific
instructions on installing cable TV, consult your cable TV company. One possible method of utilizing the converter/
descrambler provided by your cable TV company is explained below.
Please note: An RF switch provided with two inputs (A and B) is required (not supplied).
“A” position on the RF switch (not supplied): You can view all unscrambled channels by using the TV’s channel keys.
“B” position on the RF switch (not supplied): You can view the scrambled channels via the converter/descrambler by
using the converter’s channel keys.
RF switch (not supplied)
Two-set
signal
splitter
(not
supplied)
OUT
Cable TV line
IN
Cable TV converter/
descrambler
(not supplied)
A
• Consult your SHARP Dealer or Service Center for the type of splitter, RF switch or combiner that might be required.
Power Connection
AC INPUT terminal
(AC 110-240 V)
POWER
Plug the AC cord
into the main unit,
and then put it
through the cable
holder.
Wall outlet
AC cord
A
• Use a commercially available AC plug adapter, if necessary, depending on the design of the wall outlet.
• Unplug the AC cord from the LCD TV set and wall outlet when LCD TV set is not to be used for a long period of time.
9
LC-20B8U_E_P07-12.p65
9
05.2.3, 2:01 PM
Part Names of the Main Unit
How to adjust the angle
Controls
Upper control panel
CH (Channel) (
)/(
VOL (Volume)
(–)/(+)
)
INPUT
MENU
POWER
Tilt the display by grabbing onto the
carrying handle while securely holding
down the stand with your other hand.
To change the vertical angle of the LCD TV
set, tilt the screen up to 2.5 degrees forward
or 10 degrees backward. The LCD TV set can
also be rotated up to 12 degrees to right and
left. Please adjust the angle so that the LCD
TV set can be watched most comfortably.
Speaker
Headphone jack (
Speaker
)
Plug the headphone mini-plug into the headphone
jack located on the front of the main unit.
OPC (Optical Picture Control)
sensor
Remote sensor
OPC (Optical Picture Control) indicator
The OPC indicator lights up green when “OPC” is
set to “ON”. (See page 19.)
POWER/WAKE UP TIMER indicator
POWER/WAKE UP TIMER indicator lights up green when the
power is on, and red when in the standby mode (the indicator will
not light when the main power is off), and orange when the wakeup timer is set (the indicator will light when in the standby mode).
A
• INPUT, CH ( )/( ), VOL (–)/(+) and MENU on the main unit have the same functions as the same buttons on the remote control.
Fundamentally, this operation manual provides a description based on operation using the remote control.
Listening with Headphones
■ Plug the headphone mini-plug into the headphone jack located on the front of the main unit.
▼ On-screen display
VOLUME
20
Headphones
Adjust the sound volume
using VOL ( + ) / ( – ) on the
remote control.
A
• Headphones are not included in the supplied accessories.
• No sound is heard from the main unit speakers when a headphone mini-plug is connected into the headphone jack.
• Do not set the volume at a high level. Hearing experts advise against extended listening at high volume levels.
10
LC-20B8U_E_P07-12.p65
10
05.2.4, 11:36 AM
Part Names of the Main Unit (Continued)
Terminals
Rear View
Carrying handle
* Using the Kensington Lock
AC INPUT
(AC 110-240 V)
(
• This LCD TV set has a
Kensington Security Standard
slot for use with a Kensington
MicroSaver Security System.
Refer to the information that
came with the system for
instructions on how to use it to
secure the LCD TV set.
)
Round lock for
Kensington Security
Standard slot*
ANT
(Antenna terminal)
INPUT4/
OUTPUT
INPUT2
(COMPONENT)
INPUT5
(PC-IN)
VIDEO
AUDIO (L)
AUDIO (R)
S-VIDEO
VIDEO
AUDIO (L)
AUDIO (R)
Y
PB
PR
AUDIO (L)
AUDIO (R)
Y
PB
PR
AUDIO (L)
AUDIO (R)
INPUT3
INPUT1
(COMPONENT)
AUDIO
ANALOG RGB
(
)
How to Fix the Cables
• Secure cables and cords with the supplied cable clamp so that they do not get caught when mounting the cover.
Pull down the hook
to open the cover.
Cable clamp
11
LC-20B8U_E_P07-12.p65
11
05.2.4, 11:48 AM
Part Names of the Remote Control
POWER (p. 15)
Switches the Liquid Crystal
Television power on or standby.
DISPLAY
Displays the receiving channel and
the current time for 10 seconds.
PIC.FLIP (p. 32)
Sets the orientation of the picture.
AV MODE (p. 19)
Selects preferred AV MODE.
SLEEP (p. 31)
Sets the sleep timer.
BACKLIGHT (p. 20)
Adjusts the brightness of the screen.
MENU RETURN (p. 17)
Returns to the previous screen.
' / " / \ / | (Cursor control) (p. 17)
Selects a desired item on the screen.
ENTER
Executes a command.
MENU (p. 17)
Displays the menu screen.
INPUT (p. 16)
Switches the input source between
INPUT1, INPUT2, INPUT3, INPUT4,
INPUT5 (PC) and TV mode.
MUTE (p. 16)
Mutes the sound.
AUDIO ONLY (p. 30)
Outputs audio without screen image.
CC (p. 29)
Displays Closed Caption subtitles.
FLASHBACK (p. 17)
Returns to the previous channel.
VOL (+)/(–) (p. 16)
Sets the volume.
CH ( )/( ) (p. 17)
Selects a channel.
MTS (p. 16)
Selects audio settings.
Channel Select (p. 17)
Sets the channel.
TV Signals in Your Region
This product is factory set to comply with the TV broadcasting system in the United States. For Brazil, Argentina and Uruguay,
set the color system according to the country before using this product by following the table below.
Country
TV broadcasting
system
Factory setting of color system
TV
Video
User setting
TV/Video
U.S.A.
Color: NTSC
TV ch: US ch
NTSC (N358)
US ch
NTSC (N358)
US ch
Not required or N/A
Canada, Mexico,
Latin America
Color: NTSC
TV ch: US ch
NTSC (N358)
US ch
NTSC (N358)
US ch
Not required or N/A
Brazil
Color: PAL-M
TV ch: US ch
NTSC (N358)
US ch
NTSC (N358)
US ch
Set color system to
PAL-M (see page 24)
Argentina,
Uruguay
Color: PAL-N
TV ch: US ch
NTSC (N358)
US ch
NTSC (N358)
US ch
Set color system to
PAL-N (see page 24)
A
• The 3 Dimensional Y/C separation circuit* only works when the color system is set to N358 in TV mode and Video mode.
* The 3 Dimensional Y/C separation circuit is used to remove flickering and color bleeding.
* The 3 Dimensional Y/C separation circuit does not function when S-VIDEO or COMPONENT signals are input.
12
LC-20B8U_E_P07-12.p65
12
05.2.3, 2:01 PM
EZ SETUP (With AUTO CLOCK Setting)
EZ SETUP during the First Power On
4
■ When you turn on the LCD TV set for the first time, it will
automatically memorize the broadcasting channels and
clock.
Please perform the following instructions before you press
POWER.
(1) Insert the batteries into the remote control. (See page 7.)
(2) Connect the antenna cable to the LCD TV set. (See page 8.)
(3) Connect the AC cord to the AC INPUT terminal of the
LCD TV set and plug in the AC cord to the wall outlet.
(See page 9.)
Press ENTER to access START EZ SETUP mode.
Press '/" to select “YES”, and press ENTER.
A
• If you want to stop the EZ SETUP process once it has
started, press MENU and it will be canceled. If you want to
set up again, please refer to CH-SETTING on pages 23 and
24.
YES
NO
POWER
CONNECT
ANTENNA
OR
CABLE.
The tuner will automatically search for the broadcasting
and cable TV channels. (The channel number will
automatically increase when it appears.)
PLEASE
AUTO
WAIT
PROGRAMMING
The LCD TV set will automatically switch to searching
for EDS signals.
1
If EDS signals are received, the channel number and time will
be displayed, and then the screen shown in step 5 appears.
Press POWER on the upper side of the main unit, to
turn on the TV. The SELECT LANGUAGE screen will
be displayed.
Press '/" to select “ENGLISH”, “ESPAÑOL”
(Spanish) or “FRANÇAIS” (French).
PLEASE
NOW
WAIT
SEARCHING
TIME
ENGLISH
ESPAÑOL
FRANÇAIS
5
Once EZ SETUP is completed, the lowest channel
number memorized will be displayed.
2
2
Press ENTER to access CH-SETTING mode.
Press '/" to select “ON” or “OFF”. When you select
“ON”, the LCD TV set will automatically memorize the
broadcasting channels.
STEREO
SAP
MONO
ON
11:53AM
OFF
A
• If you select “OFF”, EZ SETUP will be canceled.
3
Press ENTER to access AUTO CLOCK mode.
Press '/" to select “ON” or “OFF”.
When you select “ON”, the LCD TV set will
automatically adjust the clock to search time-signals
(EDS signals), which are provided by some TV stations.
The AUTO CLOCK setting may take from several
minutes to an hour depending on the number of
channels to receive and signal status. If you know the
channel of the EDS signal carrier (PBS or other) in your
area, select “OFF” and follow the procedure in AUTO
CLOCK Setting. (See page 14.)
A
• Do not let the EZ SETUP screen remain unattended for a long time.
• If EZ SETUP does not memorize all the channels in your region,
please refer to pages 23 and 24 for more information on manually
memorizing the channels using CH-SETTING.
• It may be difficult to preset when the broadcasting signals are
weak, the channel cycle frequency is incorrect or the frequency
jamming is occurring around the area. Please refer to pages 23
and 24 for more information on manually memorizing channels
using CH-SETTING.
• If there are no channels with EDS signals or the antenna signal is
weak, the AUTO CLOCK setting may not operate. In this case, the
“EDS CH IS NOT AVAILABLE.” message will appear and the
mode will change to MANUAL CLOCK setting. Refer to page 14 to
set the clock manually.
ON
OFF
13
LC-20B8U_E_P13-18.p65
13
05.2.4, 11:36 AM
Setting the CLOCK
AUTO CLOCK Setting
There are two methods of setting the clock: AUTO CLOCK
and MANUAL CLOCK. AUTO CLOCK uses EDS signals,
which are provided by some TV stations, to automatically
adjust the clock. MANUAL CLOCK sets the clock manually in
areas where no channel carries EDS signals.
1
Press MENU to display the Menu screen.
2
Press \/| to select “SETUP”.
3
Press '/" to select “CLOCK”, and press ENTER.
SETUP
CH–
MTS
CLO
INP
V–C
CLO
COL
PC
LAN
MANUAL CLOCK Setting
OPTION
SETTING
C
U
H
S
O
S
G
K
T
I
E
R
E
U
4
P
D
S
B
C
SY
TTI
AGE
E
L
A
S
N
L
O
P
T
G
E
C
T
E
A
• CLOCK:
The AUTO CLOCK setting may take from several minutes to an hour
depending on the number of channels to receive and signal status.
• EDS CH < AUTO >:
If there are no channels with EDS signals or the antenna signal is
weak, the AUTO CLOCK Setting may not operate. In such a
case, the message “EDS CH IS NOT AVAILABLE.” appears, and
the CLOCK setting screen (in step 4 in AUTO CLOCK Setting) is
displayed. Refer to MANUAL CLOCK Setting to set the clock
manually.
• EDS CH < Not AUTO >:
If the channel you have selected for “EDS CH” is wrong or the EDS
signal carrier is weak, or when there is no broadcast, the AUTO
CLOCK Setting may not operate. In such cases, the message
“EDS CH (XXX) EDS DATA IS NOT AVAILABLE.” appears, and
the CLOCK setting screen (in step 4 in AUTO CLOCK Setting) is
displayed as in the case with EDS CH < AUTO >. Follow step 4
and repeat the AUTO CLOCK Setting procedure.
• If broadcasting channels are not memorized, EDS signals cannot
be received even when the “EDS CH” is set to “AUTO”. In this
case, try EZ SETUP again. (See pages 23 and 24.)
CT
K
ION
M
If there are no channels with EDS signals, set the clock
manually using MANUAL CLOCK.
1
Repeat steps 1 to 4 of AUTO CLOCK Setting.
2
Press '/" to select “MANUAL”, and press ENTER.
SET
TIME
DISPLAY
AUTO
MANUAL
4
Press '/" to select “SET”, and press ENTER.
SET
TIME
DISPLAY
AUTO
MANUAL
3
Press '/" to select “DST”, and press \/| to select
“ON” or “OFF”.
Press '/" to select “TIME”, and press \/| to set the
time, and press ENTER.
5
12:00AM
11:59PM
Press '/" to select “AUTO”, and press ENTER.
• Holding down \/| changes the setting at a high speed.
● If you do not know the channel that carries EDS signals in your
area, set “EDS CH” to “AUTO” and press ENTER. If you know the
channel of the EDS signal carrier in your area, press \/| to select
the channel and press ENTER.
SET
TIME
DISPLAY
EDS
CH
11:59AM
12:00PM
SET
TIME
DISPLAY
● When set to “AUTO CLOCK”, the current time is acquired
automatically when the main power is turned OFF. (This function
will not work when EDS CH is not set.)
■ Backup
The clock function is maintained for about 5 minutes even
when the AC cord has been shut off due to a power outage
or when moving the LCD TV set. (Since about 30 minutes
are required to charge the backup power supply, it may not
be possible to maintain the clock function if the charging time
is excessively short.)
If the clock setting has been reset, repeat the procedures on
this page.
Press MENU to exit.
A
• Make sure to press ENTER after adjusting the time. Otherwise,
the time will not be set.
• When “DST” is set to “ON”, the time entered is forwarded by 1
hour.
• Please be sure to set “DST” before setting “TIME”.
14
14
OFF
12: 0 0 AM
AUTO
4
LC-20B8U_E_P13-18.p65
DST
TIME
05.2.3, 2:04 PM
Basic Operation
Daylight Saving Time (DST) Adjustment
Turning On and Off the Main Power
The Daylight Saving-Time changes as shown below. Set the
DST to “ON” to forward the clock by 1 hour. To rewind the
clock by 1 hour, set the DST to “OFF”.
POWER
(Spring)
On the first Sunday in April DST starts.
1:00AM
2:00AM
Advances 1 hour.
3:00AM
4:00AM
(Autumn)
On the last Sunday in October DST finishes.
1:00AM
2:00AM
Rewinds 1 hour.
1:00AM
2:00AM
POWER/WAKE UP TIMER indicator
TIME DISPLAY
You can display the current time on the screen.
● Press POWER. The POWER/WAKE UP TIMER indicator
instantly changes from red to green and the LCD TV set
is turned on.
On-screen display
STEREO
SAP
MONO
A
• The on-screen display disappears in a few seconds.
● To turn off the main power, press POWER again.
Standby
1
Repeat steps 1 to 3 of AUTO CLOCK Setting on page
14.
2
Press '/" to select “TIME DISPLAY”, and press
ENTER.
SET
TIME
DISPLAY
ON
OFF
To turn off the LCD TV set
3
Press '/" to select “ON” or “OFF”, and press
ENTER.
Selected item
Description
ON
Displays the current time on the screen.
OFF
No display
4
Press POWER. The POWER/WAKE UP TIMER indicator will
turn red.
To turn the LCD TV set back on
Press POWER again. The POWER/WAKE UP TIMER
indicator will turn green.
Press MENU to exit.
A
• When you press DISPLAY, the current time is displayed for about
10 seconds.
15
LC-20B8U_E_P13-18.p65
15
05.2.4, 11:36 AM
Basic Operation (Continued)
Switching the Input Modes (INPUT1/
INPUT2/INPUT3/INPUT4/INPUT5(PC)/TV)
1
Turn on the power of the connected video equipment.
2
Press INPUT to select the applicable input source. The
screen changes in order of INPUT1, INPUT2, INPUT3,
INPUT4, INPUT5 (PC) and TV mode each time INPUT
is pressed.
INPUT1 mode
Sound Volume
■ To adjust the volume
● Press VOL (+) to increase the sound volume.
The bar indicator shifts right.
VOLUME
50
● Press VOL (–) to decrease the sound volume.
The bar indicator shifts left.
INPUT1
VOLUME
10
480P
INPUT2 mode
INPUT2
480P
■ To mute the sound
● Press MUTE to temporarily turn off the sound.
The MUTE mark
is displayed for 4 seconds.
INPUT3 mode
INPUT3
INPUT4 mode
INPUT4
● Press MUTE or VOL (+)/(–) to turn the sound back to the
previous level.
The mute function is automatically turned off when any of
the following buttons are pressed: POWER, MUTE,
VOL (+)/(–) or MTS.
VOLUME
10
INPUT5 (PC) mode
INPUT5
PC
TV mode
2
A
• INPUT1 or INPUT2:
Used for video equipment connected to the COMPONENT input
terminals.
• INPUT3:
Used for video equipment connected to the INPUT3 terminals.
The S-video input terminal is additionally provided for the
INPUT3 terminal. If both the S-video terminal and normal
video terminals are connected with cables, the S-video input
terminal takes priority.
• INPUT4/OUTPUT:
INPUT4 mode is used to adjust the preset settings and IN or
OUT can be selected. INPUT4 indication is not displayed
when OUT is selected. (For details on setting INPUT4
SELECT, see page 24.)
• INPUT5:
If you connect the PC to the PC-IN terminals, you can view
the PC image on the LCD TV set.
A
• When VOL (+)/(–) is pressed in the Mute mode, the sound turns
on and the volume indicator is displayed.
• The Mute function is canceled when POWER is pressed.
■ To select MTS (Multichannel TV Sound)
1
Press MTS to display the MTS screen.
2
Press MTS to select the MTS settings.
STEREO: stereo audio
SAP:
secondary audio program
MONO:
monophonic audio
STEREO < ON A I R
<ON A I R
SAP
MONO
A
• “ON AIR” appears when a STEREO or SAP broadcast is being
aired.
16
LC-20B8U_E_P13-18.p65
16
05.2.3, 2:04 PM
Basic Operation (Continued)
Changing Channels
Selecting Menu Items
The menus can be used to adjust the various settings of the
LCD TV set. Select the desired menu item by following the
steps below. See the next page for each Menu screen.
A
• The items displayed differ depending on the setting conditions.
• The item selected is displayed in yellow.
• Settings most recently adjusted will be saved in memory.
■ Using the remote control
You can select channels using Channel Select or
CH ( )/( ).
• This LCD TV set allows you to select up to 125 channels
(1 to 125). To select a channel, enter a 2- or 3-digit number.
■ Using Channel Select
When selecting the channel using Channel Select, complete
input of the channel number by holding down the button for
the last digit for a moment.
To select a 1- or 2-digit channel number (e.g., Channel 5):
Complete the following procedure within 4 seconds.
1
Press the
button.
2
Press the
button.
0–
5
A
• When selecting a 1-digit channel number, do not fail to press the
button first.
To select a 3-digit channel number (e.g., Channel 115):
1
Press MENU on the remote control to display the Menu
screen.
2
Press \/| to select the desired menu item.
• The cursor moves left or right.
• The cursor indicates the selected menu item.
3
Press '/" to select the desired item, and press \/|
to adjust the selected item.
• For “AV MODE”, “OPC”, “ADVANCED” and “RESET”,
press ENTER to display the setting screen.
Complete the following procedure within 4 seconds.
1
Press the
button.
2
1––
3
Press the
Press the
MENU[
PICTURE]
PICTURE S AUDIO
SETUP
OPTION
AV
MODE
[DYNAMIC]
OPC
[OFF]
BACKLIGHT
[ BRIGHT ]
CONTRAST
[
4 0 ]
BRIGHTNESS[
0 ]–
COLOR
[+
5]–
TINT
[
0 ]
SHARPNESS
[
0 ]–
ADVANCED
RESET
button.
1 1–
button.
1 15
A
• The 3-digit channel number can be selected only when the
receiving mode is set to “CABLE” in “CH-SETTING”. (For details
on setting the receiving mode, see page 23.)
4
+
+
+
Press MENU RETURN to return to the previous screen,
or press MENU to exit.
: SELECT
ENTER : ENTER
RETURN : BACK
MENU : EXIT
■ Using the control panel of the main unit
Changing channels with CH (
)/(
) on the remote control
Air:
Press CH ( ) and the channels change in the order shown below:
2 → 3 → . . . → 68 → 69 → 2 → 3 → . . .
Press CH ( ) and the channels change in the order shown below:
3 → 2 → 69 → 68 → . . . → 3 → 2 → . . .
Cable: Press CH ( ) and the channels change in the order shown below:
1 → 2 → 3 → . . . → 125 →1 → 2 → 3 → . . .
Press CH ( ) and the channels change in the order shown below:
3 → 2 → 1 → 125 → . . . → 3 → 2 → 1 → . . .
■ Using FLASHBACK
● Press FLASHBACK to switch the currently tuned channel
to the previously tuned channel.
You can also operate the menu with the control panel of the
main unit.
Button operations on the control panel correspond to the
ones on the remote control as shown below.
Control panel of the main unit
VOL (–)/(+): Cursor \/| on the remote control
CH ( )/( ): Cursor "/' on the remote control
MENU: MENU on the remote control
INPUT: ENTER on the remote control
● Press FLASHBACK again to switch back to the currently
tuned channel.
17
LC-20B8U_E_P13-18.p65
17
05.2.3, 2:05 PM
Basic Operation (Continued)
■ Menu setting screens
0
For details on setting each menu item, refer to the page number indicated below.
A
• The illustrations and on-screen displays in this manual are for explanation purposes and may vary slightly from the actual
appearance.
• Depending on the setting condition, such as an input mode, it may not be possible to adjust or set some items. In such cases, a message
will be displayed on the menu setting screen.
PICTURE
MENU[
PICTURE]
PICTURE S AUDIO
SETUP
OPTION
AV
MODE
[DYNAMIC]
OPC
[OFF]
BACKLIGHT
[ BRIGHT ]
CONTRAST
[
4 0 ]
BRIGHTNESS[
0 ]–
COLOR
[+
5]–
TINT
[
0 ]
SHARPNESS
[
0 ]–
ADVANCED
RESET
: SELECT
ENTER : ENTER
Page
AV MODE ....................................................... 19
OPC ................................................................ 19
BACKLIGHT ................................................... 20
CONTRAST .................................................... 20
BRIGHTNESS ................................................ 20
COLOR ........................................................... 20
TINT ................................................................ 20
SHARPNESS .................................................. 20
ADVANCED .............................................. 21, 22
RESET ............................................................ 20
+
+
+
RETURN : BACK
MENU : EXIT
The bar above is an operational guide for the remote
control. The bar will change in accordance with each
menu setting screen.
AUDIO
SETUP
OPTION
MENU[
AUDIO]
PICTURE
AUDIO
SETUP
TREBLE
BASS
BALANCE
PC
SOUN
RESET
M E N U [ SETUP]
PICTURE
AUDIO
SETUP
CH–
MTS
CLO
INP
V–C
CLO
COL
PC
LAN
MENU[
OPTION]
PICTURE
AUDIO
SETUP
ED
CA
[
[
[
D
OPTION
0]
0]
0]
SEL
–
–
L
ECT
+
+
R
OPTION
SETTING
C
U
H
S
O
S
G
K
T
I
E
R
E
U
4
P
D
S
B
C
SY
TTI
AGE
OPTION
VIEW
AUDI
BLUE
SLEE
WAKE
NO
S
NO
O
POWE
PICT
E
L
A
S
N
O
P
–
I
P
R
U
L
O
P
T
G
E
C
T
E
MO
O
SC
T
UP
GN
ER
M
RE
CT
K
ION
M
D
N
R
I
E
L
E
M
T
AL
AT
AN
F
Y
EN
ER
IMER
OFF
ION
OFF
AGEMENT
LIP
Page
TREBLE .......................................................... 22
BASS .............................................................. 22
BALANCE ....................................................... 22
PC SOUND SELECT (for PC mode) ............. 23
RESET ............................................................ 22
Page
CH-SETTING ............................................ 23, 24
MTS ......................................................... 16, 24
CLOCK ...................................................... 14, 15
INPUT4 SELECT ............................................ 24
V-CHIP BLOCK ......................................... 25-28
CLOSED CAPTION ........................................ 29
COLOR SYSTEM ..................................... 12, 24
PC SETTING (for PC mode) .......................... 34
LANGUAGE .............................................. 13, 24
Page
VIEW MODE ................................................... 30
AUDIO ONLY .................................................. 30
BLUE SCREEN .............................................. 30
SLEEP TIMER ................................................ 31
WAKE-UP TIMER ........................................... 31
NO SIGNAL OFF ............................................ 32
NO OPERATION OFF .................................... 32
POWER MANAGEMENT (for PC mode) ....... 35
PICTURE FLIP ............................................... 32
18
LC-20B8U_E_P13-18.p65
18
05.2.3, 2:05 PM
Basic Adjustment Settings
AV MODE
OPC
AV MODE gives you preset options to choose from, to best
match the image based on room-brightness and playback
software used.
Automatically adjusts the brightness of the screen.
1
Press MENU to display the Menu screen.
1
Press MENU to display the Menu screen.
2
Press \/| to select “PICTURE”.
2
Press \/| to select “PICTURE”.
3
Press '/" to select “AV MODE”, and press ENTER.
3
Press '/" to select “OPC”, and press ENTER.
4
Press '/" to select the desired setting, and press
ENTER.
4
Press '/" to select “ON” or “OFF”, and press ENTER.
ON
STANDARD
OFF
DYNAMIC
Selected item
DYNAMIC(FIXED)
MOVIE
Description
ON
Automatically adjusts the brightness
OFF
No adjustment
GAME
5
5
Press MENU to exit.
A
• You can select a different AV MODE item for each input mode.
(For example, select “STANDARD” for TV input and “DYNAMIC”
for VIDEO input.)
• When “AV MODE” is set to “DYNAMIC (FIXED)”, “NO PICTURE
ADJUSTMENTS AVAILABLE IN [DYNAMIC (FIXED)].” is displayed and the items in the PICTURE screen (except “OPC” and
“ADVANCED”) cannot be set.
Press MENU to exit.
A
• When setting to “ON”, the OPC indicator lights up green, senses
the surrounding light and automatically adjusts the backlight
brightness. Make sure no object obstructs the OPC sensor, which
could affect its ability to sense surrounding light.
Directly setting the AV MODE
1
Press AV MODE.
2
Before the AV MODE display disappears, press
AV MODE again and select your desired setting.
• Each time you press AV MODE, the mode changes
as shown below.
AV MODE [STANDARD]
AV MODE [GAME]
AV MODE [MOVIE]
Selected item
AV MODE [DYNAMIC]
AV MODE [DYNAMIC (FIXED)]
Description
STANDARD
Changing image settings to standard
values.
DYNAMIC
For a clear-cut image emphasizing
high contrast for sports viewing.
DYNAMIC (FIXED)
Changing image settings to factory
preset values. No adjustments are
allowed.
MOVIE
Controlling the contrast to enable
easier viewing of dark images.
GAME
Controlling the brightness of video
games and other images for easier
viewing.
19
LC-20B8U_E_P19-24.p65
19
05.2.3, 2:05 PM
Basic Adjustment Settings (Continued)
BACKLIGHT
PICTURE Adjustments
You can adjust the brightness of the picture.
You can adjust the picture to your preference with the
following picture settings.
1
Press MENU to display the Menu screen.
2
Press \/| to select “PICTURE”.
1
Press MENU to display the Menu screen.
3
Press '/" to select “BACKLIGHT”.
2
Press \/| to select “PICTURE”.
3
Press '/" to select a specific adjustment item.
PICTURE
AV
M
OPC
BACK
CONT
BRIG
COLO
TINT
SHAR
ADVA
RESE
AUDIO
ODE
LIGH
RAST
HTNE
R
PNES
NCED
T
SETUP
OPTION
[DYNAMIC]
[OFF]
T
[ BRIGHT ]
[
4 0 ]
SS[
0 ]–
[+
5]–
[
0 ]
S
[
0 ]–
+
+
+
4
Press \/| to adjust the item to the desired position.
5
Press MENU to exit.
A
• “BACKLIGHT” cannot be adjusted while “OPC” is set to “ON”.
2
Press BACKLIGHT to display the BACKLIGHT screen.
Press BACKLIGHT to change the setting.
OPC OFF
BACKLIGHT [BRIGHT]
OPC ON
BACKLIGHT [AUTO]
AUDIO
ODE
LIGH
RAST
HTNE
R
PNES
NCED
T
OPC OFF
BACKLIGHT [NORMAL]
OPC OFF
BACKLIGHT [VARIABLE]
OPC OFF
BACKLIGHT [DARK]
A
• The BACKLIGHT screen automatically disappears in 3 seconds.
• [BRIGHT]: Maximum brightness
[NORMAL]: Suitable for viewing in a well-lit area. Saves energy.
[DARK]:
Sufficiently bright when viewing in dim areas.
[VARIABLE]: The brightness can be adjusted to suit your preference using \/|.
[AUTO]:
Screen brightness adjusts according to the ambient
light of the room to conserve power consumption.
The OPC indicator lights up green.
• When set to “AUTO”, make sure no object obstructs the OPC
sensor, which could affect its ability to sense surrounding light.
SETUP
OPTION
[DYNAMIC]
[OFF]
T
[ BRIGHT ]
[
4 0 ]
SS[
0 ]–
[+
5]–
[
0 ]
S
[
0 ]–
20
+
Press \/| to adjust the item to the desired position.
5
Press MENU to exit.
\ button
| button
BACKLIGHT
The screen dims
The screen brightens
CONTRAST
For less contrast
For more contrast
BRIGHTNESS
For less brightness
For more brightness
COLOR
For less color intensity
For more color intensity
TINT
Skin tones become
purplish
Skin tones become
greenish
SHARPNESS
For less sharpness
For more sharpness
A
• Select “ADVANCED”, and press ENTER to set “COLOR TEMP.”,
“I/P SETTING”, “NOISE CLEAN”, “FILM MODE” or “QUICK
SHOOT”. See pages 21 and 22.
• The items on the “ADVANCED” menu (except for “COLOR TEMP.”)
cannot be set when the PC mode is selected as an input mode.
• When resetting all adjustment items (except for the items on the
“AV MODE”, “OPC” and “ADVANCED” menus) to factory preset
values, perform the following procedure.
1 Press '/" to select “RESET” in the PICTURE screen, and
press ENTER.
2 Press '/" to select “YES”, and press ENTER.
20
LC-20B8U_E_P19-24.p65
+
+
4
Selected item
Directly setting the BACKLIGHT
1
PICTURE
AV
M
OPC
BACK
CONT
BRIG
COLO
TINT
SHAR
ADVA
RESE
05.2.3, 2:05 PM
Basic Adjustment Settings (Continued)
COLOR TEMPERATURE
I/P SETTING
You can adjust the color temperature to give a better white
balance.
1
Press MENU to display the Menu screen.
2
Press \/| to select “PICTURE”.
3
Press '/" to select “ADVANCED”, and press ENTER.
PICTURE
AV
M
OPC
BACK
CONT
BRIG
COLO
TINT
SHAR
ADVA
RESE
4
AUDIO
ODE
LIGH
RAST
HTNE
R
PNES
NCED
T
O
E
R
L
/
O
I
U
E
L
D
E
U
P
I
L
I
S
OR
T
[
EN
[
E
[
SET
SE
C
M
MO
CK
S
ET
.
]
]
]
G
N
T
Repeat steps 1 to 3 of COLOR TEMPERATURE.
2
Press '/" to select “I/P SETTING”, and press ENTER.
PROGRESSIVE
SETUP
OPTION
[DYNAMIC]
[OFF]
T
[ BRIGHT ]
[
4 0 ]
SS[
0 ]–
[+
5]–
[
0 ]
S
[
0 ]–
EMP
0
0
0
TIN
LEA
DE
HOO
1
INTERLACE
+
+
3
Press '/" to select “INTERLACE” or “PROGRESSIVE”,
and press ENTER.
4
Press MENU to exit.
Selected item
+
Press '/" to select “COLOR TEMP.”, and press
ENTER.
C
R
G
B
I
N
F
Q
R
Adjusting the image and input signal can give you a more
beautiful picture.
USER
HIGH
INTERLACE
PROGRESSIVE
Description
Use this setting when you cannot get a clear
picture with PROGRESSIVE. (Especially suitable
for media with special effects like game software.)
Normally, you should select this setting.
A
• “I/P SETTING” cannot be set when 480P, 576P, 720P or 1080I
signal is received from the COMPONENT terminals.
• “I/P SETTING” cannot be adjusted when the PC mode is selected
as an input mode.
MIDDLE
NOISE CLEAN
LOW
Produces a clearer video image.
5
Press '/" to select the desired item, and press
ENTER.
6
Press MENU to exit.
Selected item
Repeat steps 1 to 3 of COLOR TEMPERATURE.
2
Press '/" to select “NOISE CLEAN”, and press ENTER.
ON
Description
USER
Can set your desired color*
HIGH
MIDDLE
LOW
White with bluish tone
OFF
White with reddish tone
* When you select “USER”, the following items are adjustable.
Selected item
1
\ button
| button
RED
Weaker red
Stronger red
GREEN
Weaker green
Stronger green
BLUE
Weaker blue
Stronger blue
3
Press '/" to select “ON”, and press ENTER.
4
Press MENU to exit.
A
• “NOISE CLEAN” cannot be set when 1080I or 720P signal is
received from the COMPONENT terminals.
• “NOISE CLEAN” cannot be adjusted when the PC mode is
selected as an input mode.
A
• When resetting the items in the “USER” setting to factory preset
values, perform the following procedure.
1 Press '/" to select “RESET” in the ADVANCED screen, and
press ENTER.
2 Press '/" to select “YES”, and press ENTER.
21
LC-20B8U_E_P19-24.p65
21
05.2.3, 2:05 PM
Basic Adjustment Settings (Continued)
FILM MODE
AUDIO Adjustments
Automatically detects a film-based source (originally encoded
at 24 frames/second), analyses it, and then recreates each
still film frame for cinematic picture quality.
1
Repeat steps 1 to 3 of COLOR TEMPERATURE on
page 21.
2
Press '/" to select “FILM MODE”, and press ENTER.
ON
OFF
3
Press '/" to select “ON”, and press ENTER.
4
Press MENU to exit.
A
• Set “FILM MODE” to “ON” manually to detect a film-based source
(originally encoded at 24 frames/second) when the input source
has vertical frequency of 60 Hz (e.g. NTSC).
• “FILM MODE” cannot be set when 480P, 576P, 720P or 1080 I signal
is received from the COMPONENT terminals.
• “FILM MODE” cannot be adjusted when the PC mode is selected
as an input mode.
• Film mode does not work when the input source has vertical
frequency of 50 Hz (e.g. PAL, SECAM).
QUICK SHOOT
Provides sharp pictures suitable for fast moving images such
as a sports program.
1
Repeat steps 1 to 3 of COLOR TEMPERATURE on
page 21.
2
Press '/" to select “QUICK SHOOT”, and press ENTER.
You can adjust the sound quality to your preference with the
following settings.
1
Press MENU to display the Menu screen.
2
Press \/| to select “AUDIO”.
3
Press '/" to select a specific adjustment item.
AUDIO
TRE
BAS
BAL
PC
RES
B
S
A
S
E
SETUP
OPTION
LE
[
0]
[
0]
NCE[
0]
OUND
SEL
T
Press \/| to adjust the item to the desired position.
5
Press MENU to exit.
Selected item
\ button
4
Press MENU to exit.
For weaker treble
For stronger treble
BASS
For weaker bass
For stronger bass
BALANCE
Decrease audio from
the right speaker
Decrease audio from
the left speaker
A
• The items on the AUDIO menu cannot be set when headphones
are not used and “INPUT4 SELECT” is set to “OUT
VAO”.
• When resetting all adjustment items (except for “PC SOUND
SELECT”) to factory preset values, perform the following
procedure.
1 Press '/" to select “RESET” in the AUDIO screen, and press
ENTER.
2 Press '/" to select “YES”, and press ENTER.
A
• “QUICK SHOOT” may cause image noise. If this occurs, set the
function to “OFF”.
• “QUICK SHOOT” cannot be adjusted when the PC mode is
selected as an input mode.
22
LC-20B8U_E_P19-24.p65
22
| button
TREBLE
OFF
Press '/" to select “ON”, and press ENTER.
+
+
R
4
ON
3
–
–
L
ECT
05.2.3, 2:05 PM
Useful Features
PC SOUND SELECT (for PC mode)
You can switch the sound mode while the LCD TV set is
connected to the PC. Make sure the PC mode is selected
before making this setting.
CH-SETTING
■ EZ SETUP
When you move to an area with different broadcasting
signals, you may have to set the channel numbers and
the time with the EZ SETUP function. To activate EZ
SETUP, perform the following procedure.
1 Press '/" to select “CH-SETTING” in the SETUP screen (see
page 18), and press ENTER.
2 Press '/" to select “EZ SETUP”, and press ENTER.
3 Press '/" to select “YES”, and press ENTER.
Refer to page 13 for more information on EZ SETUP.
■ Setting the AIR/CABLE
It is necessary to set the receiving mode to AIR or CABLE
channels to receive locally broadcast TV programs.
1
Press MENU to display the Menu screen.
2
Press \/| to select “AUDIO”.
1
Press MENU to display the Menu screen.
3
Press '/" to select “PC SOUND SELECT”, and press
ENTER.
2
Press \/| to select “SETUP”.
4
Press '/"/\/| to select the desired setting, and press
ENTER.
3
Press '/" to select “CH-SETTING”, and press ENTER.
4
Press '/" to select “AIR/CABLE”, and press ENTER.
Press '/" to select the desired setting, and press ENTER.
5
INPUT1
INPUT4
INPUT2
INPUT5(PC)
INPUT3
TV
Press MENU to exit.
A
• “INPUT4” cannot be set when “INPUT4 SELECT” is set to
“OUT
FAO” or “OUT
VAO” in the SETUP menu.
E
A
C
C
5
Z
SE
IR/C
H
SE
H
ME
T
A
A
M
U
B
R
O
P
LE
CH
RY
AIR
CABLE
Press MENU to exit.
A
• Receivable channels of the LCD TV set are:
AIR channels:
CABLE channels:
VHF: 2 through 13.
1 (HRC and IRC)
UHF: 14 through 69.
2 through 125 (STD, HRC and IRC)
23
LC-20B8U_E_P19-24.p65
23
05.2.3, 2:05 PM
Useful Features (Continued)
■ Saving broadcast TV channels in the memory
SETUP
1
Press MENU to display the Menu screen.
2
Press \/| to select “SETUP”.
3
Press '/" to select “CH-SETTING”, and press ENTER.
4
Press '/" to select “CH SEARCH”, and press ENTER.
E
A
C
C
5
Z
SE
IR/C
H
SE
H
ME
T
A
A
M
U
B
R
O
P
LE
CH
RY
CABLE
1
Press ENTER. The tuner will search through all available
channels in your area and add them to the TV memory.
1
Press MENU to display the Menu screen.
2
Press \/| to select “SETUP”.
3
Press '/" to select the desired item, and press ENTER.
SETUP
CH–
MTS
CLO
INP
V–C
CLO
COL
PC
LAN
2
STEREO
SAP
MONO
A
• To interrupt CH SEARCH, press MENU RETURN. CH SEARCH will
stop at the current channel and will not add any higher channels.
■ Adding weak or additional channels or erasing
unwanted channels from TV memory
OPTION
SETTING
C
U
H
S
O
S
G
K
T
I
E
R
E
U
S
B
C
SY
TTI
AGE
E
L
A
S
N
L
O
P
T
G
E
C
T
E
CT
K
ION
M
4
Press '/" to change the setting, and press ENTER.
5
Press MENU to exit.
Selected item
Individual settings of programs can be adjusted.
4
P
D
MTS
Factory setting
Secondary
audio program
[MONO] Monophonic
audio
INPUT4 SELECT* [IN]
INPUT4/OUTPUT
terminals selected as
input terminals
1
Repeat steps 1 to 3 of Saving broadcast TV channels
in the memory.
2
Press '/" to select “CH MEMORY”, and press
ENTER.
E
A
C
C
Z
SE
IR/C
H
SE
H
ME
T
A
A
M
U
B
R
O
P
LE
CH
RY
CHANNEL
SKIP
AIR
ON
COLOR SYSTEM TV mode:
LANGUAGE
Press '/" to move the cursor to “CHANNEL”, and use
\/| or Channel Select to select the desired channel to
be added or erased.
4
Press '/" to move the cursor to “SKIP”, and use \/|
to select “ON” or “OFF”.
5
Press MENU to exit.
A
• If CH SEARCH is performed again, the previously memorized
channels will be lost.
[ENGLISH]
24
N358/PAL-M/PAL-N
[ESPAÑOL]
[FRANÇAIS]
* “INPUT4 SELECT” cannot be set when “INPUT4” is selected in
“PC SOUND SELECT” in the AUDIO menu or in “WAKE-UP
TIMER” in the OPTION menu.
A
• For details about the following items, refer to each indicated page.
• CH-SETTING ....................... Pages 23 and 24
• CLOCK ................................. Pages 14 and 15
• V-CHIP BLOCK .................... Pages 25 to 28
• CLOSED CAPTION ............. Page 29
• PC SETTING ........................ Page 34
• TV mode:
The LCD TV set is factory set to comply with the color system in
the United States (NTSC-N358).
For Brazil (PAL-M), Argentina (PAL-N) or Uruguay (PAL-N), adjust
the color system before using the LCD TV set.
24
LC-20B8U_E_P19-24.p65
[OUT
FAO]
Line output is selected,
output volume is fixed,
speaker output is
available.
[OUT
VAO]
Line output is selected,
output volume is variable,
speaker output is mute.
INPUT mode:
N358/N443/PAL/PAL-M/
(INPUT3/INPUT4) PAL-N/SECAM/PAL60/AUTO
• When the INPUT1/2 (COMPONENT) or INPUT5
(PC) mode is selected, this function cannot be
set.
2
3
Setting options
[STEREO] Stereo audio [SAP]
05.2.3, 2:05 PM
Useful Features (Continued)
V-CHIP Settings
■ V-CHIP
• This function allows TV programs to be restricted and TV usage to be controlled based on FCC data. It prevents children from watching
violent or sexual scenes that may be harmful.
• Restriction of TV programs includes two ratings that contain information about the program: the MPAA (Motion Picture Association of
America) rating and the TV Parental Guidelines. The MPAA rating is restricted by age. TV Parental Guidelines are restricted by age and
content.
• Since a TV program may use either the MPAA rating or the TV Guidelines, both should be adjusted for complete control.
MPAA rating
Rating
⇑
Description
G
GENERAL AUDIENCES. All ages admitted.
PG
PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for children.
agebased
PG-13
PARENTS STRONGLY CAUTIONED. Some material may be inappropriate for children under 13.
R
RESTRICTED. Under 17 requires accompanying parent or adult guardian.
⇓
NC-17
NO ONE 17 AND UNDER ADMITTED.
X
X is an older rating that is unified with NC-17 but may be encoded in the data of older movies.:
MPAA rating
Example 1:
PG-13 in the age-based rating is
blocked, this will also
automatically block the higher
ratings R, NC-17 and X.
Example 2:
R in the age-based rating is
blocked, this will also automatically
block the higher ratings NC-17 and
X.
A
• The MPAA rating is only age-based.
TV parental guidelines
⇐ content-based ⇒
V
(Violence)
S
(Sexual
Situation)
L
(Adult
Language)
D
(Sexually
Suggestive
Dialog)
✕
✕
✕
✕
TV-14 (Parents Strongly Cautioned)
✕
✕
✕
✕
TV-MA (Mature Audience Only)
✕
✕
✕
Rating
FV
(Fantasy
Violence)
TV-Y (All children)
TV-Y7 (Direct to Older Children)
✕
TV-G (General Audience)
agebased TV-PG (Parental Guidance Suggested)
X
⇑
⇓
: The content rating can be set, but this rating is not normally broadcast by TV stations.
✕ : The content rating can be set.
TV parental guidelines
Example:
When TV-Y7 in the age-based rating is set to BLOCK, the higher ratings (TV-G, TV-PG, TV-14 and TV-MA) will also be blocked automatically. In
addition, D, L, S, V and FV in BLOCK CONTENT are automatically blocked unless you manually set BLOCK CONTENT.
A
• Age-based ratings can be modified by the content-based ratings, but only in the combinations indicated by an ✕ in the table above.
• Choosing a lower age-based rating blocks the higher age-based ratings regardless of content rating settings.
• If you set TV-Y or TV-Y7 to BLOCK, BLOCK CONTENT will display all items.
25
LC-20B8U_E_P25-29.p65
25
05.2.3, 2:06 PM
Useful Features (Continued)
Canadian Rating Systems
• The TV rating systems in Canada are based on the Canadian Radio-Television and Telecommunications Commission
(CRTC) policy on violence in television programing.
• While violence is the most important content element to be rated, the structure developed takes into consideration
other program content like language, nudity, sexuality and mature themes.
• When setting the V-CHIP on the Canadian system you can choose either the Canadian English ratings or the
Canadian French ratings.
Canadian English ratings
Rating
⇑
Description
C
Children: Intended for younger children under the age of 8 years. Pays careful attention to
themes that could threaten their sense of security and well-being.
C8e
Children over 8 years old: Contains no portrayal of violence as the preferred, acceptable,
or only way to resolve conflict; nor encourage children to imitate dangerous acts which
they may see on the screen.
G
General: Considered acceptable for all age groups. Appropriate viewing for the entire
family, contains very little violence, physical, verbal or emotional.
PG
Parental Guidance: Intended for a general audience, but may not be suitable for younger
children (under the age of 8) because it could contain controversial themes or issues.
14e
Over 14 Years: Could contain themes where violence is one of the dominant elements of
the storyline, but it must be integral to the development of plot or character. Language
usage could be profane and nudity present within the context of the theme.
18e
Adults: Intended for viewers 18 years and older and might contain depictions of violence,
which while related to the development of plot, character or themes, are intended for adult
viewing. Could contain graphic language and portrayals of sex and nudity.
age-based
⇓
Canadian French ratings
Rating
⇑
Description
G
General: All ages and children, contains minimal direct violence, but may be integrated
into the plot in a humorous or unrealistic manner.
8 anse
General but inadvisable for young children: May be viewed by a wide public audience, but
could contain scenes disturbing to children under 8 who cannot distinguish between
imaginary and real situations. Recommended for viewing with parent.
13 anse
Over 13 years: Could contain scenes of frequent violent scenes and therefore
recommended for viewing with parent.
16 anse
Over 16 years: Could contain frequent violent scenes and intense violence.
18 anse
Over 18 years: Only for adult viewing. Could contain frequent violent scenes and extreme
violence.
age-based
⇓
26
LC-20B8U_E_P25-29.p65
26
05.2.3, 2:06 PM
Useful Features (Continued)
● Setting BLOCK CONTENT (TV GUIDELINES)
V-CHIP Settings (Continued)
V-CHIP settings allow you to set MPAA rating, TV GUIDELINES, Canadian English ratings and Canadian French ratings.
■ Setting V-CHIP
1
Repeat steps 1 to 4 of Setting V-CHIP.
2
Press '/" to select “TV GUIDELINES”, and press
ENTER.
3
Press '/" to select “BLOCK CONTENT”, and press
ENTER.
T
T
T
T
T
T
B
[
1
Press MENU to display the Menu screen.
2
Press \/| to select “SETUP”.
3
Press '/" to select “V-CHIP BLOCK”, and press ENTER.
4
“INPUT SECRET NO.” will be displayed. Input the 4digit secret number by using Channel Select.
4
–
5
5
Y
Y
G
P
1
M
C
L
7
G
4
A
K
B
B
B
B
B
B
CO
S
V
L
L
L
L
L
L
N
O
O
O
O
O
O
T
F
CK
CK
CK
CK
CK
CK
ENT
V]
B
B
B
B
B
L
L
L
L
L
O
O
O
O
O
C
C
C
C
C
K
K
K
K
K
Press MENU to exit.
Press '/" to select the desired item, and press
ENTER.
M
T
C
C
S
6
–
–
–
–
–
–
–
–
O
Press '/" to select the desired item, and press \/|
to select “BLOCK” or “– – – – – ” (unblock).
D
L
S
V
FV
A
• When you input the secret number for the first time, press
ENTER to register. Otherwise, continue to step 5.
–
V
V
V
V
V
V
L
D
P
V
A
A
T
AA
G
N.
N.
AT
U
E
F
U
IDELINES
NGLISH
RATINGS
RENCH
RATINGS
S
Press '/" to select the desired item, press \/| to
select “BLOCK”.
(MPAA rating)
(TV GUIDELINES)
G
PG
PG–13
R
NC–17
X
–
B
B
B
B
B
–
L
L
L
L
L
–
O
O
O
O
O
–
C
C
C
C
C
T
T
T
T
T
T
B
[
–
K
K
K
K
K
V
V
V
V
V
V
L
D
–
–
–
–
–
–
O
Y
Y
G
P
1
M
C
L
7
G
4
A
K
–––––
BLOCK
BLOCK
BLOCK
BLOCK
BLOCK
CONTENT
S
V
FV]
(Canadian English ratings) (Canadian French ratings)
C
C
G
P
1
1
7
8+
G
4+
8+
B
B
B
B
B
B
L
L
L
L
L
L
O
O
O
O
O
O
C
C
C
C
C
C
K
K
K
K
K
K
G
8
13
16
18
a
a
a
a
n
n
n
n
s
s
s
s
+
+
+
+
B
B
B
B
B
L
L
L
L
L
O
O
O
O
O
C
C
C
C
C
K
K
K
K
K
Press MENU to exit.
A
• The setting automatically enters “BLOCK” for any ratings below
your selection.
27
LC-20B8U_E_P25-29.p65
27
05.2.3, 2:06 PM
Useful Features (Continued)
■ Activating V-CHIP BLOCK
● Setting STATUS
You can activate V-CHIP BLOCK after setting V-CHIP.
■ Changing V-CHIP BLOCK settings
1
Repeat steps 1 to 3 of Setting V-CHIP on page 27,
then “INPUT SECRET NO.” will be displayed.
–
2
1
Repeat steps 1 to 4 of Setting V-CHIP on page 27.
2
Press '/" to select “STATUS”, and press ENTER.
M
T
C
C
S
3
P
V
A
A
T
AA
G
N.
N.
AT
U
E
F
U
IDELINES
NGLISH
RATINGS
RENCH
RATINGS
S
–
–
–
Input the 4-digit secret number by using Channel
Select; the V-CHIP select mode will be displayed.
Set the V-CHIP BLOCK again.
M
T
C
C
S
P
V
A
A
T
AA
G
N.
N.
AT
U
E
F
U
IDELINES
NGLISH
RATINGS
RENCH
RATINGS
S
■ Changing or clearing the SECRET NUMBER
If you forget the secret number, clear the secret number
as follows.
Press '/" to select “ON”, and press ENTER.
Upper control panel of the main unit
ON
OFF
A
• If “STATUS” is set to “OFF”, V-CHIP BLOCK will not be
activated.
4
CH (
VOL (+)
MENU
Press MENU to exit.
1
Repeat steps 1 to 3 of Setting V-CHIP on page 27, or
1 and 2 of Canceling the V-CHIP BLOCK screen
while V-CHIP BLOCK is activated, then “INPUT
SECRET NO.” will be displayed.
2
Press and hold both CH ( ) and VOL (+) on the main
unit simultaneously until the message “INPUT SECRET
NO.” blinks.
3
Press MENU to exit.
■ Canceling the V-CHIP BLOCK screen while
V-CHIP BLOCK is activated
1
“V-CHIP HAS BEEN ACTIVATED” appears if you watch
a program with the same Program Rating data you
configured.
V–CHIP
HAS
BEEN
ACTIVATED
TV–14
DLSV
A
• “V-CHIP HAS BEEN ACTIVATED” will not be displayed if
“STATUS” is set to “OFF”.
2
Press MENU to display “INPUT SECRET NO.”.
–
3
)
–
–
–
Input the 4-digit secret number by using Channel
Select; V-CHIP BLOCK is temporarily canceled. If you
input an incorrect secret number, “SECRET NO. IS
INCORRECT.” is displayed. In this case, input the
correct secret number.
28
LC-20B8U_E_P25-29.p65
28
05.2.3, 2:06 PM
Useful Features (Continued)
CLOSED CAPTION
Directly setting the CLOSED CAPTION
■ Setting CLOSED CAPTION
• This LCD TV set is equipped with an internal Closed Caption
decoder. “Closed Caption” is a system which allows conversations, narration, and sound effects in TV programs and home
videos to be viewed as captions on the TV screen (see the
illustration).
• Not all programs and videos will offer closed captioning. Please
look for the “ ” symbol to ensure that captions will be shown.
• The Closed Caption broadcasts can be viewed in two modes:
CAPTION and TEXT. For each mode, two channels are
available: CH1 and CH2.
The CAPTION mode shows subscripts of dialogs and commentaries of TV dramas and news
programs while allowing a clear view
of the picture.
The TEXT mode displays various
information over the picture (such as
TV program schedules and weather
forecasts, etc.) that is independent of
the TV programs.
1
Press CC to display the CC/TEXT screen.
CC/TEXT[OFF]
2
Press CC to change the setting.
CC/TEXT [OFF]
CC/TEXT [T2]
CC/TEXT [T1]
CC/TEXT [CC1]
CC/TEXT [CC2]
A
• CC1: CLOSED CAPTION mode for CH1 data
CC2: CLOSED CAPTION mode for CH2 data
T1: TEXT mode for CH1 data
T2: TEXT mode for CH2 data
1
Press MENU to display the Menu screen.
2
Press \/| to select “SETUP”.
3
Press '/" to select “CLOSED CAPTION ”, and press
ENTER.
4
Press '/" to change the CLOSED CAPTION setting,
and press ENTER.
OFF
CC1
CC2
A
• If a broadcast contains Closed Caption data and MUTE is
pressed, the LCD TV set enters CLOSED CAPTION mode
automatically. Pressing MUTE again will return the LCD TV set
to its previous condition.
• Closed Caption may malfunction (white blocks, strange characters, etc.) if signal conditions are poor or if there are problems at
the broadcast source. This does not necessarily indicate a
problem with the LCD TV set.
• If any button is pressed to call up the on-screen display while
viewing a Closed Caption broadcast, the closed captions will
disappear momentarily.
• If no TEXT broadcast is being received while viewing in the
TEXT mode, the screen may become blank for some programs.
Should this occur, switch the CLOSED CAPTION mode to
“OFF”.
• If you select “CC1”, “CC2”, “T1” or “T2” (or MUTE is pressed)
while “VIEW MODE” is set to “ZOOM” or “STRETCH”, “VIEW
MODE” will be changed to “4:3” or “16:9” automatically.
T1
T2
A
• CC1: CLOSED CAPTION mode for CH1 data
CC2: CLOSED CAPTION mode for CH2 data
T1: TEXT mode for CH1 data
T2: TEXT mode for CH2 data
5
Press MENU to exit.
29
LC-20B8U_E_P25-29.p65
29
05.2.3, 2:06 PM
Useful Features (Continued)
WAKE-UP TIMER
SLEEP TIMER
You can set the SLEEP TIMER to automatically turn off the TV.
POWER
Setting the SLEEP TIMER on the Menu screen
1
Press MENU to display the Menu screen.
2
Press \/| to select “OPTION”.
3
Press '/" to select “SLEEP TIMER”, and press
ENTER.
4
1
Repeat steps 1 and 2 of SLEEP TIMER.
2
Press '/" to select “WAKE-UP TIMER”, and press
ENTER.
3
Press '/" to select the items, and press \/| to
adjust them.
T
T
C
V
Press '/"/\/| to select “30MIN”, “60MIN”, “90MIN”,
“120MIN”, “150MIN” or “OFF”, and press ENTER.
3 0 MIN
You can set the WAKE-UP TIMER to automatically turn on
the TV.
9 0 MIN
M
M
A
L
ER
E
NNEL
UME
OFF
7: 0 0 AM
1
2 0
Selected item
Description
TIMER
To activate the WAKE-UP TIMER, set this item to
“ON”.
TIME
Set the time at which you want to turn on the TV.
CHANNEL
Set the TV channel or input mode when the TV is
turned on.
VOLUME
Set the volume when the TV is turned on.
OFF
6 0 MIN
I
I
H
O
4
Press MENU to exit.
5
Make sure to turn off the LCD TV set with the remote
control.
• The WAKE-UP TIMER will not be activated if the LCD
TV is turned off with POWER on the main unit.
12 0 MIN
15 0 MIN
5
Press MENU to exit.
A
• After you set the SLEEP TIMER, pressing POWER on the main
unit or POWER on the remote control will cancel the SLEEP
TIMER setting.
• 5 minutes before the SLEEP TIMER turns off the LCD TV set,
“5MIN REMAINING” is displayed on the screen for 4 seconds.
The SLEEP TIMER counts down and shows a similar 4-second
display for each remaining minute until the timer turns off the LCD
TV set.
Directly setting the SLEEP TIMER
1
Press SLEEP to display the SLEEP TIMER screen.
SLEEP
2
TIMER
[OFF]
Press SLEEP to change the setting.
[OFF]
[30MIN]
[150MIN]
[120MIN]
A
• When you set “WAKE-UP TIMER”, the POWER/WAKE UP TIMER
indicator lights up orange while in the standby mode.
• Be sure to adjust the clock with “CLOCK” in “SETUP” before
setting “SLEEP TIMER” and “WAKE-UP TIMER”.
• You can output the picture and sound of the external device with
the WAKE-UP TIMER function. Make sure that the external device
turns on at the time you specified.
• The CHANNEL setting for “WAKE-UP TIMER” changes in the
following order: INPUT1→INPUT2→INPUT3→INPUT4→TV (AIR
or CABLE)*
* The skipped channels cannot be selected.
• When not using LCD TV set for a long period of time, either turn
the main power off or set “WAKE-UP TIMER” to “OFF”.
• When “WAKE-UP TIMER” has been set to “ON”, the TV is turned
on at the set time every day until it is set to “OFF”.
• After the TV has been turned “ON” by “WAKE-UP TIMER”, “SLEEP
TIMER” is automatically set to 120 minutes for safety reason.
• The time that is currently set can be checked on the screen by
pressing DISPLAY.
• When the time set for “WAKE-UP TIMER” is reached when the
power is on, the TV changes to the set channel. The volume does
not change at this time.
[60MIN]
[90MIN]
(minutes)
A
• The SLEEP TIMER screen automatically disappears in 3 seconds.
31
LC-20B8U_E_P30-32.p65
31
05.2.4, 11:37 AM
Useful Features (Continued)
PICTURE FLIP
NO SIGNAL OFF
The NO SIGNAL OFF function allows you to save energy.
When set to “ENABLE”, the power will automatically shut
down if no signal inputs for 5 minutes.
You can set the orientation of the picture.
Setting the PICTURE FLIP on the MENU screen
1
Press MENU to display the Menu screen.
1
Repeat steps 1 and 2 of NO SIGNAL OFF.
2
Press \/| to select “OPTION”.
2
Press '/" to select “PICTURE FLIP”, and press
ENTER.
3
Press '/" to select “NO SIGNAL OFF”, and press
ENTER.
3
Press '/" to select the desired mode, and press
ENTER.
4
Press '/" to select “ENABLE”, and press ENTER.
NORMAL
ENABLE
MIRROR
DISABLE
ROTATE
UPSIDE
5
DOWN
Press MENU to exit.
4
A
• “DISABLE” is factory preset value.
• This function can work only in TV mode.
• If interfered with by other broadcast or radio waves, “NO SIGNAL
OFF” may not work properly even when the broadcast is over.
NO OPERATION OFF
When set to “ENABLE”, the power will automatically shut
down if there is no operation for 3 hours.
1
Repeat steps 1 and 2 of NO SIGNAL OFF.
2
Press '/" to select “NO OPERATION OFF”, and
press ENTER.
3
Press '/" to select “ENABLE”, and press ENTER.
Press MENU to exit.
Directly setting the PICTURE FLIP
1
Press PIC.FLIP to display the PICTURE FLIP screen.
2
Press PIC.FLIP to change the setting.
PICTURE FLIP [NORMAL]
PICTURE FLIP [MIRROR]
PICTURE FLIP [UPSIDE DOWN]
PICTURE FLIP [ROTATE]
[NORMAL]
Normal image orientation.
[MIRROR]
To display mirror images
for special uses.
[UPSIDE DOWN]
To display upside down
images for special uses.
[ROTATE]
To display rotated images
for special uses.
ENABLE
DISABLE
• 5 minutes before the power shuts down, remaining
time is displayed every minute.
4
Press MENU to exit.
A
• “DISABLE” is factory preset value.
32
LC-20B8U_E_P30-32.p65
32
05.2.3, 2:06 PM
Connecting a PC
Viewing an Image from a PC
Use the INPUT5 (PC-IN) terminals to connect a PC.
A
• The PC input terminals are DDC1/2B-compatible.
• Refer to page 35 for a list of PC signals compatible with the System.
• Make sure to select the same signal values for the output signal of a PC and the input signal of the LCD TV set before connecting with the
PC. (See pages 34 and 35.)
• Depending on the PC being used, images may not be shown without converting the output signals into external output. Please refer to your
PC’s manuals regarding converting to external output.
To AUDIO
input terminal
To Audio output
terminal
ø 3.5 mm stereo minijack cable
(commercially available)
RGB cable (supplied)
To ANALOG
RGB terminal
To ANALOG RGB
output terminal
PC
Connecting the RGB cable
Ferrite core
• Connect the RGB cable making sure
that it fits correctly into the terminal.
Then, firmly secure the connectors
by tightening the screws on both
sides of the plug.
• Do not remove ferrite cores attached
to the RGB cable.
Signal names for 15-pin mini D-sub connecter
5
4
10
15
3
9
14
2
8
13
7
12
Pin No.
1
2
3
4
5
1
6
11
Signal name
R
G
B
Not connected
CSYNC
Pin No.
6
7
8
9
0
Signal name
GND (Ground)
GND (Ground)
GND (Ground)
+5V
GND (Ground)
Pin No.
q
w
e
r
t
Signal name
Not connected
SDA
HD
VD
SCL
A
• Pin No. 5 is not used for inputting the signal.
• Pin No. 9 is not connected with the supplied RGB cable.
Displaying an Image from a PC
To view an image from a PC, perform the following procedure.
1 Select the INPUT5 (PC) mode using INPUT on the remote control or the LCD TV
set. (See page 16.)
2 Select the PC input signal. (See page 34.)
3 Select the PC sound input mode. (See page 23.)
4 Adjust the “FINE SYNC.” items if the PC image does not come in clearly. (See page
34.)
33
LC-20B8U_E_P33-35.p65
33
05.2.3, 2:07 PM
Connecting a PC (Continued)
INPUT SIGNAL (for PC mode)
Select the computer input signal before displaying the PC
image on the LCD TV screen.
FINE SYNC. Adjustments (for PC mode)
You can adjust the PC image using the FINE SYNC. menu.
A
• Make sure to select the input signal to “1024 × 768”, “800 ×
600” or “640 × 480”, before connecting a PC.
1
Press MENU to display the Menu screen.
2
Press \/| to select “SETUP”.
3
Press '/" to select “PC SETTING”, and press
ENTER.
SETUP
CH–
MTS
CLO
INP
V–C
CLO
COL
PC
LAN
4
Repeat steps 1 to 3 of INPUT SIGNAL (for PC mode)
to display the PC SETTING screen.
2
Press '/" to select “FINE SYNC.”, and press ENTER.
INPUT
SIGNAL
FINE
SYNC.
3
C
U
H
S
O
S
G
K
T
I
E
R
E
U
4
P
D
S
B
C
SY
TTI
AGE
E
L
A
S
N
L
O
P
T
G
E
C
T
E
CT
K
ION
M
Press '/" to select “INPUT SIGNAL”, and press
ENTER.
Press '/" to select the desired input signal and
press ENTER.
1 0 24x768(6 0 Hz)
8 0 0 x6 0 0 (6 0 Hz)
Press '/" to select the specific adjustment item.
H
V
C
P
R
OPTION
SETTING
INPUT
SIGNAL
FINE
SYNC.
5
1
.
.
L
H
E
P
P
O
A
S
O
O
C
S
E
S.[
S.[
K
[
E
[
T
0
0
0
0
]
]
]
]
–
–
–
–
4
Press \/| to adjust the item to the desired position.
5
Press MENU to exit.
Selected item
Description
H.POS.
Centers the image by moving it to the left or right.
V.POS.
Centers the image by moving it up or down.
CLOCK
Adjusts the clock frequency.
PHASE
Adjusts the clock phase.
A
• When resetting all adjustment items to factory preset values,
perform the following procedure.
1 Press '/" to select “RESET”, and press ENTER.
2 Press '/" to select “YES” and press ENTER.
8 0 0 x6 0 0 (56Hz)
64 0 x48 0 (6 0 Hz)
6
Press MENU to exit.
34
LC-20B8U_E_P33-35.p65
34
+
+
+
+
05.2.4, 11:37 AM
Connecting a PC (Continued)
POWER MANAGEMENT (for PC mode)
When this function is set to “ON”, the power will automatically shut down.
PC Compatibility Chart
PC/MAC
Resolution
31.5
60
37.9
85
31.5
60
37.9
85
31.5
60
37.9
72
37.5
75
43.3
85
31.5
60
35.1
56
✔
37.9
60
✔
48.1
72
46.9
75
53.7
85
48.4
60
56.5
70
60.0
75
68.7
85
1,280 × 720
45.0
60
1,280 × 768
48.1
60
SXGA
1,280 × 1,024
64.0
60
MAC 13"
VGA
640 × 480
34.9
67
MAC 16"
SVGA
832 × 624
49.7
75
MAC 19"
XGA
1,024 × 768
60.2
75
640 × 400
720 × 400
VGA
640 × 480
WVGA
1
Press MENU to display the Menu screen.
2
Press \/| to select “OPTION”.
3
4
PC
Press '/" to select “POWER MANAGEMENT”, and
press ENTER.
OPTION
VIEW
AUDI
BLUE
SLEE
WAKE
NO
S
NO
O
POWE
PICT
O
P
–
I
P
R
U
MO
O
SC
T
UP
GN
ER
M
RE
D
N
R
I
E
L
E
M
T
AL
AT
AN
F
Y
EN
ER
IMER
OFF
ION
OFF
AGEMENT
LIP
Press '/" to select “ON” or “OFF”, and press ENTER.
ON
Horizontal Vertical
Frequency Frequency Compatible
(kHz)
(Hz)
SVGA
XGA
WXGA
848 × 480
800 × 600
1,024 × 768
✔
✔
A
• The numerical values of resolutions and frequencies mentioned
above are standard. They may differ from the values when actually
displayed.
OFF
5
Press MENU to exit.
Selected item
Description
ON
If no signal inputs for 8 minutes, the power shuts
down.
OFF
No power management
A
• The remaining time is displayed 5 minutes before the power is
turned off.
• Even if you start using the PC and the signal inputs again, the LCD
TV set stays off.
• The LCD TV set turns on again by pressing POWER on the main
unit or POWER on the remote control. (See page 15.)
• “OFF” is factory preset value.
35
LC-20B8U_E_P33-35.p65
35
05.2.3, 2:07 PM
Connecting External Devices
You can enjoy picture and sound by connecting a VCR or a home video game system to the terminals located on the rear of
the main unit.
When connecting an external device, turn off the POWER of the main unit first to prevent any possible damage.
Example of External Devices that can be Connected
To INPUT4/OUTPUT terminal
To INPUT3 terminal
<Example>
• Camcorder
• Home video game system
<Example>
• VCR
• Laser disc player
• Audio amplifier
To INPUT5 terminal
• PC
* If your external device has an S-video
terminal, S-VIDEO connection is
recommended.
To INPUT1, INPUT2 terminals
<Example>
• DVD Player, etc.
• Digital TV tuner
* If your external device has a
component terminal, COMPONENT
connection is recommended
(you can view high-quality pictures).
ANote:
• For the cable, use a commercially available audio/video cable.
• Only connect audio/video signals to INPUT3 and INPUT4/OUTPUT terminals. Connecting other signals may result in a malfunction.
• INPUT3 has 2 video input terminals: VIDEO and S-VIDEO. When you connect external devices to both terminals (and if you select
INPUT3), you can only view pictures from the S-VIDEO terminal. To view the picture from the VIDEO terminal, do not connect any
external device to the S-VIDEO terminal.
• For more information about external device connections, see the manuals of your external devices.
Outputting Video and Audio (Video Output)
You can output video and audio signals from the LCD TV set through the INPUT4/OUTPUT terminal.
• When using INPUT4/OUTPUT as an output terminal, select “SETUP” in the Menu screen and set “INPUT4 SELECT” to
“OUT”. (See page 24.)
• The factory setting for “INPUT4 SELECT” is “IN”.
A
• When using the S-VIDEO input for INPUT3, or COMPONENT input for INPUT1 and 2, no video signal will be made to the INPUT4/OUTPUT
terminal, but audio signal will be made for connection to external audio systems.
36
LC-20B8U_E_P36-42.p65
36
05.2.3, 2:07 PM
Connecting External Devices (Continued)
Connecting to the INPUT1/2/3/4/5 Terminals
INPUT4/OUTPUT
terminal
INPUT3 terminal
Camcorder
Camcorder
VCR
VCR
S-Video cable
(commercially available)
Audio/Video cable
(commercially available)
Video
S-Video
Video
Audio (L)
Audio (L)
Audio (R)
Audio (R)
Audio/Video cable
(commercially available)
Y
Component cable
(commercially available)
Component cable
(commercially available)
Y
PB
PB
PR
PR
Audio (L)
Audio (L)
Audio (R)
Audio (R)
Audio cable
(commercially available)
Audio cable
(commercially available)
ø 3.5 mm stereo
minijack cable
(commercially
available)
RGB cable
(supplied)
PC
DVD player
INPUT2 terminal
(COMPONENT)
DVD player
INPUT1 terminal
(COMPONENT)
INPUT5 terminal
(PC-IN)
ANote:
• If your VCR (or other external devices) has an S-video terminal, S-VIDEO connection is recommended. (Use an S-video cable.)
• When you connect external devices to both S-VIDEO and VIDEO terminals (and if you select INPUT3), you can only view pictures from
the S-VIDEO terminal.
• You cannot view multiple or synthesized pictures by connecting two or more external devices. When connecting an external device, use
care to connect the video and audio cables to the corresponding terminals.
• Only when 480I, 480P, 576I, 576P, 720P or 1080I signal is received, picture can be displayed.
37
LC-20B8U_E_P36-42.p65
37
05.2.3, 2:07 PM
Troubleshooting
■ Before calling for repair services, make the following checks for possible remedies to the encountered symptoms.
LCD TV set
Problem
Sound
Picture
Picture
Check item
Reference page
There is no
picture or
sound.
• Make sure the AC cord is properly inserted in the power
outlet.
• Reception other than those of broadcasting stations can
be considered.
• Make sure the input mode is set to TV.
• Make sure the POWER switch of the main unit is on.
There is no
picture.
There is no
picture from
INPUT1/2/3/4.
• Make sure the BRIGHTNESS is properly adjusted.
• Fluorescent lamp may have reached the end of service
life.
• Make sure the S-VIDEO terminal has nothing connected.
• Make sure the AUDIO ONLY is not set to ON.
20
40
There is no
sound.
• Make sure the volume is not set to minimum.
• Make sure the sound is not set to mute.
• Make sure that headphones are not connected.
16
16
10
• Make sure the antenna cable is properly connected.
• Bad reception could be the problem.
8, 9
–
• Make sure the antenna cable is properly connected.
• Bad reception could be the problem.
8, 9
–
There is no
picture or
sound, just
noise.
Picture is
not clear.
Picture is
light or
improperly
tinted.
• Check color adjustment.
• Check COLOR SYSTEM setting.
9
–
16
15
37
30
20, 21
24
• Press the BACKLIGHT button or set the BACKLIGHT or
BRIGHTNESS settings.
• Check CONTRAST and BRIGHTNESS adjustment.
• Fluorescent lamp may have reached the end of service
life.
20
Remote control does not work.
• Check the batteries of the remote control.
• Make sure the remote sensor window is not in strong
lighting.
7
7
–
The clock (AUTO CLOCK)
cannot be set.
• The broadcasted EDS signal may be weak. Check the
antenna.
• Carry out EZ SETUP or Setting the CLOCK again.
• If EDS signal is not sent, set the clock using MANUAL
CLOCK Setting.
Unit cannot be operated.
• External influences such as lightning, static electricity,
etc., may cause improper operation. In this case, operate
the unit after first turning the power off, or unplugging the
AC cord and re-plugging it in 1 or 2 minutes.
The picture
is too dark.
38
LC-20B8U_E_P36-42.p65
38
05.2.3, 2:07 PM
20
40
13, 14, 23
14
–
Troubleshooting (Continued)
■ Before calling for repair services, make the following checks for possible remedies to the encountered symptoms.
Antenna
Problem
Check item
The picture is not sharp.
The picture moves.
•
•
•
•
The reception may be weak.
The quality of the broadcast may also be bad.
Make sure the antenna is facing the right direction.
Make sure the outside antenna is connected.
The picture is doubled or
tripled.
• Make sure the antenna is facing the right direction.
• There may be reflected electric waves from mountains or buildings.
The picture is spotted.
• There may be interference from automobiles, trains, high voltage lines,
neon lights, etc.
• There may be interference between the antenna cable and AC cord. Try
positioning them further apart.
There are stripes on the
screen or colors fade.
• Is the unit receiving interference from other devices?
Transmission antennas of radio broadcasting stations, transmission
antennas of amateur radios and cellular phones may also cause interference.
• Use the unit as far apart as possible from devices that may cause possible
interference.
PC
Check item
Problem
Reference
page
33
34
There is no image.
• Make sure the RGB cable is properly connected.
• Make sure the output signal of the PC and the input signal
setting of the LCD TV set are matched.
• Some software prohibit video playback on an external display
when playing back a video with a notebook PC. This is not
attributable to a problem with the LCD TV set.
There is no sound.
• Make sure the PC audio cable is properly connected.
• Check if “PC SOUND SELECT” is set to “INPUT5 (PC)”.
• Check if the mute function activates, or if the volume is set to
minimum.
• V-CHIP BLOCK may have been activated while an item other
than “INPUT5 (PC)” is selected in “PC SOUND SELECT”.
33
23
16
The text is blurred.
• Adjust “CLOCK” and “PHASE” using the FINE SYNC. menu.
34
The image is not displayed in
the center of the screen.
• Adjust “H.POS.” and “V.POS.” using the FINE SYNC. menu.
34
–
23
■ Cautions regarding use in high and low temperature environments
• When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly delayed. This is not
a malfunction, and the unit will recover when the temperature returns to normal.
• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a heater, as
this may cause the cabinet to deform and the LCD panel to malfunction.
Storage temperature: –4°F to +140°F (–20°C to +60°C)
39
LC-20B8U_E_P36-42.p65
39
05.2.3, 2:07 PM
Specifications
Model
Items
LCD panel
Number of dots
Video color systems
TV Standard (CCIR)
TV Tuning System
TV function
STEREO
CATV
Y/C FILTER
Brightness
Lamp life (Fluorescent lamp)
Viewing angles
Audio amplifier
Speakers
INPUT1
INPUT2
INPUT3
Terminals
INPUT4/OUTPUT
INPUT5
Antenna
Headphone
OSD language
Power supply
Power consumption
Weight
LC-20B8U
20" Advanced Super View & BLACK TFT LCD
2,359,296 dots XGA
N358, N443, PAL, PAL-M, PAL-N, SECAM, PAL-60
NTSC/PAL-M/PAL-N
PLL 181 ch.
MTS+SAP
125 ch.
3D Y/C FILTER
480 cd/m2
60,000 hours*
H: 170° V: 170°
2.1 W × 2
ø2.0 in. (ø5.0 cm), 2 pcs.
AUDIO-IN, COMPONENT-IN
AUDIO-IN, COMPONENT-IN
AUDIO-IN, VIDEO-IN, S-VIDEO-IN
AUDIO-IN, VIDEO-IN/AUDIO-OUT, VIDEO-OUT
PC Connector: 15-pin mini D-sub PC AUDIO: Mini-jack for stereo (ø3.5 mm)
F-Type
Mini-jack for stereo (ø3.5 mm)
English/Spanish/French
AC 110-240V, 50/60Hz
81 W (0.6 W standby): AC 120V
19.4 lbs. (8.8 kg), w/o accessories
* Typical time for power output decrease of about one-half assuming continuous use in a room with normal lighting, normal brightness and
temperature at 77°F/25°C
Dimensional Drawings
• The dimensional drawings are shown on the inside back cover.
■ As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for the LCD TV set
improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
40
LC-20B8U_E_P40-41.p65
40
05.2.14, 1:01 PM
Calling for Service
For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies, or customer
assistance, please call 1-800-BE-SHARP.
LIMITED WARRANTY
CONSUMER LIMITED WARRANTY
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the
“Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it
will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured
equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.
This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below
nor to any Product the exterior of which has been damaged or defaced, which has been subjected to improper voltage or
other misuse, abnormal service or handling, or which has been altered or modified in design or construction.
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide
proof of purchase to the servicer.
The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law.
ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE
LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW. Some states do not allow limitations
on how long an implied warranty lasts, so the above limitation may not apply to you.
Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those
described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of Sharp.
The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and
exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time described
herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the
Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise.
In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused
by repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall Sharp be liable or in any
way responsible for any incidental or consequential economic or property damage. Some states do not allow the exclusion
of incidental or consequential damages, so the above exclusion may not apply to you.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM
STATE TO STATE.
Model Specific Section
Your Product Model Number & Description:
LC-20B8U LCD Color Television
(Be sure to have this information available when you need
service for your Product.)
Warranty Period for this Product:
One (1) year parts and labor from the date of purchase.
Additional Item(s) Excluded from
Warranty Coverage (if any):
Non-rechargeable batteries.
Where to Obtain Service:
From a Sharp Authorized Servicer located in the United States.
To find the location of the nearest Sharp Authorized Servicer,
call Sharp toll free at 1-800-BE-SHARP.
What to do to Obtain Service:
Ship prepaid or carry in your Product to a Sharp Authorized
Servicer. Be sure to have Proof of Purchase available. If you
ship the Product, be sure it is insured and packaged securely.
TO OBTAIN PRODUCT INFORMATION, CALL 1-800-BE-SHARP OR VISIT www.sharpusa.com
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-2135
SHARP CORPORATION
41
LC-20B8U_E_P40-41.p65
41
05.2.14, 1:01 PM
VALID IN CANADA ONLY
LIMITED WARRANTY
Consumer Electronics Products
Congratulations on your purchase!
Sharp Electronics of Canada Ltd. (hereinafter called “Sharp”) gives the following express warranty to the first consumer purchaser for this
Sharp brand product, when shipped in its original container and sold or distributed in Canada by Sharp or by an Authorized Sharp Dealer:
Sharp warrants that this product is free, under normal use and maintenance, from any defects in material and workmanship. If any such
defects should be found in this product within the applicable warranty period, Sharp shall, at its option, repair or replace the product as
specified herein.
This warranty shall not apply to:
(a) Any defects caused or repairs required as a result of abusive operation, negligence, accident, improper installation or inappropriate
use as outlined in the owner’s manual.
(b) Any Sharp product tampered with, modified, adjusted or repaired by any party other than Sharp, Sharp’s Authorized Service Centres
or Sharp’s Authorized Servicing Dealers.
(c) Damage caused or repairs required as a result of the use with items not specified or approved by Sharp, including but not limited to
head cleaning tapes and chemical cleaning agents.
(d) Any replacement of accessories, glassware, consumable or peripheral items required through normal use of the product including but
not limited to earphones, remote controls, AC adapters, batteries, temperature probe, stylus, trays, filters, belts, ribbons, cables and
paper.
(e) Any cosmetic damage to the surface or exterior that has been defaced or caused by normal wear and tear.
(f) Any damage caused by external or environmental conditions, including but not limited to transmission line/power line voltage or liquid
spillage.
(g) Any product received without appropriate model, serial number and CSA/cUL markings.
(h) Any products used for rental or commercial purposes.
(i) Any installation, setup and/or programming charges.
Should this Sharp product fail to operate during the warranty period, warranty service may be obtained upon delivery of the Sharp product
together with proof of purchase and a copy of this LIMITED WARRANTY statement to an Authorized Sharp Service Centre or an
Authorized Sharp Servicing Dealer. In home warranty service may be provided at Sharp’s discretion on any Sharp television with the
screen size of 27” or larger and on any Sharp Over-the-Range Microwave Oven.
This warranty constitutes the entire express warranty granted by Sharp and no other dealer, service centre or their agent or employee is
authorized to extend, enlarge or transfer this warranty on behalf of Sharp. To the extent the law permits, Sharp disclaims any and all
liability for direct or indirect damages or losses or for any incidental, special or consequential damages or loss of profits resulting from a
defect in material or workmanship relating to the product, including damages for the loss of time or use of this Sharp product or the loss
of information. The purchaser will be responsible for any removal, reinstallation, transportation and insurance costs incurred. Correction of
defects, in the manner and period of time described herein, constitute complete fulfillment of all obligations and responsibilities of Sharp
to the purchaser with respect to the product and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict
liability or otherwise.
WARRANTY PERIODS:
Audio Products
Camcorder
DVD Products
Projector
LCD & Plasma Display TV
Microwave Oven
Television Products
VCR Products
Vacuum Cleaner
Parts & Labour (exceptions noted)
1 year
1 year
1 year
1 year (lamp 90 days)
1 year
1 year (magnetron component-4 additional years)
1 year (picture tube component-1 additional year)
1 year
1 year
To obtain the name and address of the nearest Authorized Sharp Service Centre or Dealer, please contact:
SHARP ELECTRONICS OF CANADA LTD. 335 Britannia Road East, Mississauga, Ontario L4Z 1W9
For more information on this Warranty, Sharp Extended Warranty
Offers, Sharp Canada Products, Accessory Sales, Dealer or Service
Locations, please call (905) 568-7140
Visit our Web site: www.sharp.ca
Revision 04/22/03
42
LC-20B8U_E_P36-42.p65
42
05.2.3, 2:07 PM
Dimensional Drawings
Unit: inch (mm)
13 19/32 (345)
17 31/64 (444)
5 9/32 (134)
11
2 /16 (68)
1
25 /8 (638)
5
3 /8 (92)
16 17/64 (413)
10 3/32 (256)
12 5/32 (308.4)
15 21/64 (389)
2 9/64
(54)
17 29/64 (443)
16 11/64 (410.5)
9 17/32 (242)
3 15/16 (100)
1 25/32
(45)
3 15/16 (100)
(
LC-20B8U_E_Hyo1_4.p65
2
05.2.4, 5:49 PM
)
MODE D’EMPLOI
MANUAL DE OPERACIÓN
LIQUID CRYSTAL TELEVISION
TÉLÉVISEUR ACL
TELEVISOR CON PANTALLA DE
CRISTAL LÍQUIDO
TELEVISOR DE CRISTAL
LÍQUIDO
Sharp Plaza, Mahwah, New Jersey 07430-2135
SHARP CORPORATION
MANUAL DE OPERAÇÃO
OPERATION MANUAL
MODE D’EMPLOI
MANUAL DE OPERACIÓN
MANUAL DE OPERAÇÃO
Printed in Mexico
Imprimé au Mexique
Impreso en México
Impresso no México
Products that have earned the ENERGY STAR® are designed to protect the environment
through superior energy efficiency.
Les produits agréés ENERGY STAR® sont conçus pour protéger l’environnement par un
rendement énergétique supérieur.
TINS-B774WJZZ
05P04-MX-NM
LC-20B8U_E_Hyo1_4.p65
1
05.2.4, 5:49 PM
PORTUGUÊS
ESPAÑOL
OPERATION MANUAL
SHARP ELECTRONICS CORPORATION
FRANÇAIS
ENGLISH
LC-20B8U
LC-20B8U