Product Data Sheet: Emerson Smart Wireless Gateway 1410

Product Data Sheet
August 2014
00813-0200-4410, Rev CA
Emerson Smart Wireless Gateway 1410

Gateway connects the WirelessHART® self-organizing networks with any host system

Easy configuration and management of self-organizing networks

Easy integration into control systems and data applications through serial and Ethernet connections

Seamless integration into AMS® Device Manager

Greater than 99% data reliability with industry proven security

Smart Wireless capabilities extends the full benefits of PlantWeb® architecture to previously
inaccessible locations
Smart Wireless Gateway 1410
August 2014
Emerson Smart Wireless Gateway 1410
Gain real-time process information with greater than 99% wireless
data reliability

The Emerson Smart Wireless Gateway 1410 automatically manages wireless communications in
constantly changing environments

Native integration with Ovation automation system provides simple and fast commissioning for wireless
field networks

Connect to data historians, legacy host systems, and other applications through Ethernet, Modbus®,
Serial, OPC, EtherNet/IP, and HART® outputs
Complete wireless network configuration tools
provided with each Emerson Smart Wireless
Gateway 1410

The integrated web interface allows easy configuration of the wireless
network and data integration without the need to install additional
software

Complimentary AMS Wireless Configurator software provides Emerson
Device Dashboards to configure devices and view diagnostic data

Drag and drop device provisioning enables a
secure method to add new wireless devices to
the wireless field network
Contents
Emerson’s Smart Wireless Solution . . . . . . . . . . . . . . . . . . . 3
Product Certifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Functional specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Dimensional Drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Physical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2
August 2014
Smart Wireless Gateway 1410
Emerson’s Smart Wireless Solution
IEC 62591 (WirelessHART)... the industry
standard
Self-organizing, adaptive mesh routing

No wireless expertise required, network automatically finds
the best communication paths.

The self-organizing, self-healing network manages multiple
communication paths for any given device. If an obstruction is
introduced into the network, data will continue to flow
because the device already has other established paths. The
network will then lay in more communication paths as needed
for that device.
Reliable wireless architecture

Standard IEEE 802.15.4 radios.

2.4 GHz ISM band sliced into 15 radio-channels.

Time Synchronized Channel Hopping to avoid interference
from other radios, Wi-Fi, and EMC sources and increase
reliability.

Direct sequence spread spectrum (DSSS) technology delivers
high reliability in challenging radio environment.
Emerson’s Smart Wireless
Seamless integration to all existing host systems

Native integration into Ovation is transparent and seamless.

Gateways interface with existing host systems using industry
standard protocols including OPC, Modbus TCP/IP, and
Modbus RTU.
Layered security keeps your network safe

Ensures that data transmissions are received only by the
Smart Wireless Gateway.

Network devices implement industry standard encryption,
authentication, verification, anti-jamming, and key
management.

Third party security verification including Achilles and
FIPS197.
3
Smart Wireless Gateway 1410
August 2014
Ordering Information
Specification and selection of product materials, options, or components must be made by the purchaser of the equipment. See
page 6 for more information on Material Selection.
Table 1. Smart Wireless Gateway Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Model
Product description
1410
Smart Wireless Gateway, 2.4 GHz DSSS, WirelessHART, Webserver, AMS Ready, HART IP
★
Wireless configuration
A
25 Device Network (10.5-30 VDC)
★
Ethernet communications - physical connection
1(1)(2)
Single Ethernet Connection
★
2(3)(4)
Dual Ethernet Connection
★
Serial communication
N
None
★
A(5)
Modbus RTU via RS-485
★
Ethernet communication - data protocols(6)
D1
Modbus TCP/IP
★
D2
OPC
★
D3
EtherNet/IP
★
D4(6)
Modbus TCP/IP, OPC
★
D5(6)
EtherNet/IP, Modbus TCP/IP
★
D6(6)
EtherNet/IP, OPC
★
E2
Ovation Ready
★
E3(7)
Webserver Only
★
Antenna options(8)
WX2
Basic Antenna
★
WL2
SMA-to-N-Type Adapter Cable, and Remote Antenna Kit
★
WN2(9)
SMA-to-N-Type Adapter Cable, and High-Gain Remote Antenna Kit
★
Product certifications
NA
No Approvals
★
N5
FM Division 2, Non-incendive
★
N6
CSA Division 2 (Suitable for Canada and the United States)
★
NM
Technical Regulation Customs Union (EAC) Type N
★
4
Smart Wireless Gateway 1410
August 2014
Table 1. Smart Wireless Gateway Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Options (Include with selected model number)
Host integration(10)
H6
Allen Bradley Documentation
★
H9
Other
★
Oil and gas options
G
★
Oil and Gas Monitor Page
Typical model number:
1410 A 2 A D4 WX2 N6
(1) Single active 10/100 baseT Ethernet port with RJ45 connector.
(2) Additional ports disabled.
(3) Dual active 10/100 baseT Ethernet ports with RJ45 connectors.
(4) Multiple active ports have separate IP addresses, firewall isolation, and no packet forwarding.
(5) Convertible to RS232 via adapter, not included with Gateway.
(6) Selection of Dual Ethernet option code 2 is recommended.
(7) Requires (A) Modbus RTU via RS-485 Communication protocol.
(8) The WL2 and WN2 options require minor assembly.
(9) Not available in all countries.
(10) Support documentation included in the package.
Accessories and Spare Parts
Table 2. Spare Parts
Item description
Part number
Spare Kit, WL2 Replacement(1),
Remote Antenna, 50 ft. (15,2 m) Cable, and Lightning Arrester
01420-1615-0302
Spare Kit, WN2 Replacement(2),
High Gain, Remote Antenna, 25 ft. (7.6 m) Cable, and Lightning Arrester
01420-1615-0402
(1) Can not upgrade from integral to remote antenna.
(2) Not available in all countries.
5
Smart Wireless Gateway 1410
August 2014
Product Specifications
Functional specifications
Physical specifications
Input voltage
Material selection
10.5-30 VDC
Current draw
Operating Current Draw is based on 3 Watt power consumption.
Current (mA)
250
Operating
Region
125
12
24
30
Voltage (VDC)
Emerson provides a variety of Rosemount product with various
product options and configurations including materials of
construction that can be expected to perform well in a wide
range of applications. The Rosemount product information
presented is intended as a guide for the purchaser to make an
appropriate selection for the application. It is the purchaser’s
sole responsibility to make a careful analysis of all process
parameters (such as all chemical components, temperature,
pressure, flow rate, abrasives, contaminants, etc.), when
specifying product, materials, options and components for the
particular application. Emerson Process Management is not in a
position to evaluate or guarantee the compatibility of the
process fluid or other process parameters with the product,
options, configuration or materials of construction selected.
Weight
Radio frequency power output from antenna
0.70 lb. (0,318 kg)
Maximum of 10 mW (10 dBm) EIRP
Material of construction
Maximum of 40 mW (16 dBm) EIRP for WN2 High Gain option(1)
Housing
Environmental
Polycarbonate
Operating Temperature Range:
-40 to 167 °F (-40 to 75 °C)
Rail mount
Top hat rail EN 50022 35 mm X 7.5 mm and 35 mm x 15 mm
Operating Humidity Range:
0-100% relative humidity
EMC performance
Complies with EN61326-1:2006.
Antenna options
Optional remote mount Omni-directional Antenna
Antenna
2 dBi rubber dipole with SMA male connector
SMA connection is female
Communication specifications
Isolated RS-485
2-wire communication link for Modbus RTU multi-drop
connections
Baud rate: 57600, 38400, 19200, or 9600
Protocol: Modbus RTU
Wiring: Single twisted shielded pair, 18 AWG. Wiring distance is
approximately 4000 ft. (1,524 m)
Ethernet
10/100base-TX Ethernet communication port
Protocols: Modbus TCP, OPC, EtherNet/IP, HART-IP, https (for
Web Interface)
Wiring: Cat5E shielded cable. Wiring distance 328 ft. (100 m).
(1)
6
Not available in all countries.
Smart Wireless Gateway 1410
August 2014
Modbus
Self-organizing network
Supports Modbus RTU and Modbus TCP with 32-bit floating
point values, integers, and scaled integers.
Modbus Registers are user-specified.
AES-128 Encrypted WirelessHART, including individual session
keys. Drag and Drop device provisioning, including unique join
keys and white listing.
OPC
Internal firewall
OPC server supports OPC DA v2, v3
User Configurable TCP ports for communications protocols,
including Enable/Disable and user specified port numbers.
Inspects both incoming and outgoing packets.
EtherNet/IP
Supports EtherNet/IP protocol with 32 bit Floating Point values
and Integers. EtherNet/IP Assembly Input-Output instances are
user configurable. EtherNet/IP specifications are managed and
distributed by ODVA. For details on capabilities please see the
Smart Wireless Gateway to Allen Bradley Integration Manual
(Document No. 00809-0500-4420) on Rosemount.com.
Third party certification
Wurldtech: Achilles Level 1 certified for network resiliency
National Institute of Standards and Technology (NIST):
Advanced Encryption Standard (AES) Algorithm conforming to
Federal Information Processing Standard Publication 197
(FIPS-197).
Self-organizing network specifications
Protocol
IEC 62591(WirelessHART), 2.4 - 2.5 GHz DSSS.
Maximum network size
25 wireless devices @ 2 sec. or greater
12 wireless devices @ 1 sec.
Supported device update rates
1, 2, 4, 8, 16, 32 seconds or 1 - 60 minutes
For information on network size and update rate, please see the
capacity estimator tool on the Smart Wireless homepage by
following the link: http://www.emersonprocess.com/Wireless.
Network size/latency
25 Devices: less than 5 seconds
Data reliability
Greater than 99%
System security specifications
Ethernet
Secure Sockets Layer (SSL) enabled (default) TCP/IP
communications
Emerson Smart Wireless Gateway access
Role-based Access Control (RBAC) including Administrator,
Maintenance, Operator, and Executive. Administrator has
complete control of the Gateway and connections to host
systems and the self-organizing network.
7
Smart Wireless Gateway 1410
August 2014
Product Certifications
Approved Manufacturing Locations
Hazardous Locations Certifications
Rosemount Inc. – Chanhassen, Minnesota, USA
Emerson Process Management Asia Pacific Private Limited Singapore
North American Certifications
N5
Telecommunication Compliance
All wireless devices require certification to ensure they adhere to
regulations regarding the use of the RF spectrum. Nearly every
country requires this type of product certification. Emerson is
working with governmental agencies around the world to
supply fully compliant products and remove the risk of violating
country directives or laws governing wireless device usage.
FCC and IC
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following conditions: This device may not cause
harmful interference. This device must accept any interference
received, including interference that may cause undesired
operation. This device must be installed to ensure a minimum
antenna separation distance of 20 cm from all persons.
European Directive Information
The EC declaration of conformity can be found in the Quick Start
Guide (00825-0200-4410). The most recent revision can be
found at www.emersonprocess.com.
Ordinary Location Certification from FM
Approvals
As standard, the transmitter has been examined and tested to
determine that the design meets basic electrical, mechanical,
and fire protection requirements by FM Approvals, a nationally
recognized testing laboratory (NRTL) as accredited by the
Federal Occupational Safety and Health Administration (OSHA).
8
FM Approvals, Nonincendive for Class I Division 2
Certificate No.: 3049590
Standards Used:Class 3600:2011, Class 3611:2004, Class
3810:2005
Markings: NI CL I, DIV. 2, GP A, B, C, D
Temperature code: T4 (-40 °C ≤ Ta ≤ 60 °C)
Special Condition of Use:
1. When installed as Division 2 equipment, the 1410 shall be
mounted within a tool-secured enclosure which meets the
requirements of ANSI/ISA 61010-1 and be capable of
accepting the applicable wiring methods per the NEC.
N6
CSA Class I Division 2
Certificate No.: 2646342
Standards Used: CSA Std. C22.2 No. 0-10, CSA Std. C22.2
No. 213 - M1987, CSA Std. C22.2 No.61010-1-12,
ANSI/ISA 12.12.01-2012, ANSI/ISA 61010-1-2012
Markings: SUITABLE FOR CL I, DIV. 2, GP A, B, C, D
Temperature code: T4 (-40 °C ≤ Ta ≤ 70 °C)
NM Technical Regulation Customs Union (EAC)
Contact an Emerson process management representative
for additional information.
Notes
- Shall be powered by a class 2 power supply.
- Suitable for dry indoor locations only.
- Equipment must be installed in a suitable tool accessible
enclosure subject to the end use application.
August 2014
Smart Wireless Gateway 1410
Dimensional Drawings
Figure 1. Smart Wireless Gateway
RF connector on 1410
is an SMA female.
Matching RF cable to
antenna should be a
SMA male.
NOTE: Allow extra
space in front of unit
for wiring, antenna
connector and
antenna cable service
loop.
* Dimensions are in inches (millimeters)
9
Smart Wireless Gateway 1410
August 2014
Figure 2. WX2 Basic Antenna Dimensions
Figure 3. Remote Omni-Antenna Kit
The Remote Omni-Antenna kit includes sealant tape for remote antenna connection, SMA to N-type adapter cable, mounting
brackets for the antenna, and lightning arrester.
WL2
A
50 ft. (15,2 m)
cable
WN2
A
25 ft. (7,6 m)
cable
B
B
A. Antenna
B. Lightning Arrestor
10
August 2014
Smart Wireless Gateway 1410
Figure 4. SMA to N-Type Adapter Cable Dimensions
* Dimensions are in inches (millimeters)
11
Smart Wireless Gateway 1410
Product Data Sheet
00813-0200-4410, Rev CA
August 2014
Emerson Process Management
Rosemount Inc.
8200 Market Boulevard
Chanhassen, MN 55317 USA
T (U.S.) 1-800-999-9307
T (International) (952) 906-8888
F (952) 906-8809
www.rosemount.com
Emerson Process Management
Blegistrasse 23
P.O. Box 1046
CH 6341 Baar
Switzerland
T +41 (0) 41 768 6111
F +41 (0) 41 768 6300
www.rosemount.com
Emerson Process Management
Asia Pacific Pte Ltd
1 Pandan Crescent
Singapore 128461
T +65 6777 8211
F +65 6777 0947
Service Support Hotline: +65 6770 8711
Emerson Process Management
Latin America
1300 Concord Terrace, Suite 400
Sunrise Florida 33323 USA
Tel + 1 954 846 5030
www.rosemount.com
Email: Enquiries@AP.EmersonProcess.com
www.rosemount.com
Standard Terms and Conditions of Sale can be found at www.rosemount.com\terms_of_sale
The Emerson logo is a trade mark and service mark of Emerson Electric Co.
Rosemount, AMS, and the Rosemount logotype are registered trademarks of Rosemount Inc.
PlantWeb is a registered trademark of one of the Emerson Process Management group of companies.
HART and WirelessHART are registered trademarks of the HART Communication Foundation
Modbus is a trademark of Modicon, Inc.
All other marks are the property of their respective owners.
© 2014 Rosemount Inc. All rights reserved.
00813-0200-4410, Rev CA, 08/14