AirStage ARXA45L Product specifications

Multi Air Conditioning System for Buildings
1116, Suenaga, Takatsu-ku, Kawasaki 213-8502, Japan
http://www.fujitsu-general.com/
ISO 9001
ISO 14001
Certified number : 01 100 89394 Certified number : 01 104 9245101
Fujitsu General (Thailand) Co., Ltd.
ISO 9001
Certified number : 01 100 79269
ISO 14001
Certified number : 310102-UK
Fujitsu General (Shanghai) Co., Ltd.
ISO 9001
Certified number : 00608Q11061R2M
ISO 14001
Certified number : 00609E20454R2M
N807
All products specified in this brochure
comply with the Australian
Communications Authority's (ACA)
requirements for Electromagnetic
Fujitsu General Central Air-conditioner (Wuxi) Co., Ltd.
“
” is a worldwide trademark of FUJITSU GENERAL LIMITED and is a registered trademark in Japan and other countries or areas.
*Microsoft ® and Windows ® are registered trademarks of Microsoft Corporation in the United States.
*Adobe ® Reader® are registered trademarks of Adobe Systems Incorporated in the United States.
*Intel ®, Pentium ® and Celeron ® are registered trademark of Intel Corporation or its subsidiaries in the United States.
*AMD AthlonTM and AMD DuronTM are registered trademark of Advanced Micro Devices, Inc.
*Echelon ®, LONWORKS ®, and the Echelon logo are trademarks of Echelon Corporation registered in the United States and other countries.
*BACnet ® is a registered trademark of the American Society of Heating Refrigeration and Air Conditioning Engineers (ASHRAE).
The colors may be different from the actual colors because this catalog is printed matter.
Product specifications are subject to change without notice.
Distributed by :
Copyright© 2009-2012 Fujitsu General Limited. All rights reserved.
6NNV21-1E
CONTENTS
All for Comfort
Smart and cutting edge design
Extensive lineup from 8HP to 48HP in 2HP increment
Connectable indoor unit capacity ratio up to 150%
FEATURES
High Efficiency Operation ................. 4
Design Versatility .............................. 6
High Reliability .................................. 8
Easy Installation .............................. 10
Comfort and Convenience .............. 12
Easy Service & Maintenance ......... 14
OUTDOOR UNITS
Lineup ............................................. 16
Specifications ................................. 18
Dimensions ..................................... 20
INDOOR UNITS
High Efficiency Operating System
Installation Flexibility
EER/COP has been significantly improved by
Total pipe length of 1,000m and 150m actual
unique inverter technology and
pipe length. From small to large buildings,
refrigerant control technology.
any application can be supported.
Compact Design
User Friendly Central Control
The outdoor unit size has been significantly reduced by
Diverse building air conditioning control
optimizing of equipment. This allows for a reduction
functions can be controlled easily by
in the required installation area floor space.
central air conditioning control.
Lineup ..............................................
Compact Cassette ..........................
Cassette .........................................
Low Static Pressure Duct ...............
Slim Duct .......................................
Medium Static Pressure Duct ............
High Static Pressure Duct ..............
Floor / Ceiling .................................
Ceiling .............................................
Wall Mounted .................................
22
24
26
28
30
32
34
36
38
40
CONTROLLER
Control System ...............................
Wiring System .................................
Comparison table of Controllers ......
Wired Remote Controller (Touch Panel) ..
Wired Remote Controller .................
Simple Remote Controller ...............
Wireless Remote Controller ............
IR Receiver Unit .............................
IR Receiver Kit ...............................
Group Remote Controller ...............
Central Remote Controller ...............
Touch Panel Controller ...................
System Controller (Software) .............
44
46
47
48
50
51
52
53
53
54
56
58
60
CONVERTOR & ADAPTOR
Network Convertor .........................
Network Convertor for LONWORKS® .....
BACnet ® Gateway (Software) ............
Signal Amplifier ..............................
External Switch Controller ..............
64
65
66
67
67
SERVICE & MONITORING
Service Tool (Software) ...................... 68
Web Monitoring Tool (Software) ......... 70
DESIGN SUPPORT
Energy Recovery Ventilator ............
Auto Louver Grille Kit (Option)............
Building Information Modeling (BIM) ...
Design Simulator ............................
72
74
75
76
OPTION
Optional Parts ................................. 78
REFERENCE
Applications .................................... 81
02
03
FEATURES
Advanced system considers
high efficiency operation
Significantly improved EER/COP
Significantly greater efficiency is realized by the use
of a DC twin rotary compressor, inverter technology,
and large heat exchanger.
High Efficiency
Operation
* “EER/COP” is the coefficient of performance
[ = capacity (kW) ÷ input power (kW) ].
*EER/COP values are based on our own testing method.
*2. The data refers to an 8HP outdoor unit.
Cooling
Heating
Cooling EER
Heating COP
27% increase !
Previous
model
18% increase !
3.2
3.7
V-II
series
0
3.0
3.5
*2
*2
4.07
4.37
4.0
EER
0
3.0
3.5
4.0
COP
Energy efficiency combination
For 16HP
Choice of space saving or
energy efficiency combinations
For 24HP
For 28HP
Space saving
combination
12HP 12HP
16HP
Energy saving technology that boosted operation efficiency
18%
Energy efficiency
combination
12%
energy
saving
10%
energy
saving
8HP 8HP
Powerful large propeller fan
16HP 12HP
energy
saving
8HP 8HP 8HP
12HP 8HP 8HP
(Comparison of Average COP)
CFD*1
By using
technology, A newly designed fan
achieves high performance and low noise operation.
*1. CFD = Computational Fluid Dynamics
DC fan motor
Various energy saving features
Power consumption has been reduced by 25%
compared to previous models by using a compact
and high performance DC fan motor.
Room temperature set point limitation
Subcool heat exchanger
The minimum and maximum temperature range can be set
giving further energy saving while considering the comfort of
the occupants.
High Heat Exchange efficiency is achieved by using
an internal projection shape double pipe construction.
Auto-off timer
Each remote controller is equipped with an OFF timer function that
automatically stops operation when a fixed time has elapsed from
the start of operation. This prevents waste of energy.
Sine-wave DC inverter control
High efficiency operation is realized by using a sine
wave DC inverter control.
(Note : Except simple remote controller)
DC twin rotary compressor
Capacity save operation
Significantly greater efficiency is realized by use of
a large capacity DC twin rotary compressor with
substantially increased refrigerant intake and
compression efficiency.
Operation capacity can be set in 5 steps for rated capability.
The power consumption at peak is cut down and the maximum
load is suppressed.
°C
30
28
26
24
22
20
18
16
14
12
10
Heating Cooling
Heating set Cooling set
temp. range temp. range
Original Set
temp. limitation
Set point
limitation setting
Capacity
Operation setting (System Controller)
Peak cut
Control device
Setting
level
W
Signal input
Time
4-face heat exchanger
Heat exchange efficiency is significantly improved by
the introduction of a new 4-face heat exchanger that
increases effective surface area.
Economy operation
Economy operation can be set by remote controller.
The temperature setting is offset automatically over a certain
period of time.
Set Temp.
Down
Heating Set Temperature
MAX. - 4°C
Economy operation
Control Temperature
Down
Down
Down
Economy operation
Set Temp.
Front intake port
(corner cut air inhaling structure)
In multiple outdoor unit installations, the unique front
intake design improves airflow into the Heat Exchanger.
04
Economy operation
Control Temperature
MAX. +2°C
Cooling Set Temperature
Economy operation
Up
Up
05
FEATURES
V-II systems can be applied to
a wide variety of Building applications due to
the reduced outdoor unit size and
piping length capabilities
Space saving and compact size
Compact size has been achieved
by significantly reducing the
width of the outdoor units
compared to previous models.
Design
Versatility
V-II series
10HP
Previous model
10HP
1,300mm
V-II series
16HP
Previous model
16HP (8HP x2)
28%
52%
reduction
reduction
930mm
2,600mm
1,240mm
For 160HP
Previous model
16HP(8HP×2)×10=160HP
38.0m2
Overall piping length 1,000m
World’s top class overall piping length of 1,000m allows for application
in a wide variety buildings.
Total pipe length
*1
1,000m max.
High static pressure of 80Pa
Height difference between
outdoor and indoor units
50m max.
For the outdoor unit stated
below : 40m max.
Previous model
V-II series
57%
16HP×10=160HP
space saving
16.2m2
Actual pipe length
150m max.
The outdoor unit can have a condenser hood easily connected with
a static pressure of 80Pa standard. This allows outdoor units to be
installed within plant rooms in high rise buildings.
Powerful discharge with an external
static pressure of 80Pa.
V-II series
High capacity connection
80Pa
Various combinations from 8HP to 48HP with 2HP
increments. 11 types, 51 models of indoor units
can be selected ranging from 2.2kW to 25kW in
capacity. A maximum of 150% indoor unit
connectable capacity.
as standard
Note : When indoor unit connected
capacity is greater than 100%,
individual indoor units will operate at
a slightly lower capacity when
maximum capacity is required.
Large diameter fan and DC motor has been utilized allowing an external static pressure of
80Pa. This is approximately 2.6 times greater than the previous model.
Installation Example
Wide operating range
Pipe length from first
separation tube to the
farthest indoor unit
Height difference
between indoor and
indoor units
60m max.
15m max.
Installation in extreme temperature conditions is
possible due to an increase in operational range.
Cooling : -15°C~46°C
Heating : -20°C~21°C
(°C)
50
46°C
40
Heating
30
20
*1. Note : When there is 1 outdoor unit, the maximum is 700m.
Cooling
10
21°C
-15°C area *2
Operation possible
in cooling.
0
-20°C area
Operation possible
in heating.
-10
-20
06
-15°C
-20°C
*2. Note : When a multiple outdoor
unit connection is used, operating
range is from -5°C to 46°C in
cooling.
07
FEATURES
Backup operation
High reliability considering
long-term safety and confidence
If one of two compressors malfunctions, it will not affect the operation of
the remaining outdoor units.
Outdoor Units
If one of compressor fails, backup operation will be performed by
the remaining compressors as emergency.*1
High
Reliability
Indoor unit continuous operation
Each indoor unit is controlled individually on the system network.
This allows all indoor units to continue to operate unaffected even if an
error should occur at any indoor unit’s on the VRF network system.
Failure
*1 Note: Backup operation may not be possible depending on the combination
and trouble state.
Life-extending operation
Rotation
Outdoor unit rotational operation
The compressor starting order is rotated so that
the running time is shared.
Adoption of blue fin heat exchanger
Corrosion resistant of the heat exchanger has been
improved by the introduction of blue fin treatment to the
outdoor unit’s heat exchanger.
Blue fin heat exchanger
Cobalt Blue protection
Standard chromate protection
Aluminium base material
DC
1
AC
4
DC
2
AC
5
DC
3
DC
1
AC
4
DC
2
AC
5
DC
3
Hydrophilic coating
Remote monitoring
The Web Monitoring system allows you view system operation at all times over the internet ensuring trouble free operation.
Rotation
Rotation
DC
1
AC
4
DC
2
AC
5
Monitoring Side
VRF Network System Side
DC
3
Outdoor unit
Note: The inverter compressors start in priority.
Rotational operation is alternated by the start / stop timing of the compressors
Transmission line
Internet
Web Monitoring Tool
or
Public Telephone Line
The operating VRF network system in the building
can be monitored in real time over the Internet.
USB adaptor
(Field supplied)
Indoor unit
08
09
FEATURES
Easy piping connection
From transportation of the product to
address setting for commissioning,
significant improvements have been made
which reduce the cost of installation.
The need for an oil equalization pipe as required on
the previous model has been removed.
The installation costs have been reduced by
employing a simple 2 pipe connection
Eliminating oil equalization pipe
Easy
Installation
Simple signal line connection
Installation is made easier as the communication
wiring can be connected continuously to any
component.
Up to maximum
length
3,600m
V-II series
Easily transported
Other wiring method
Note: In a multiple refrigerant system installation,
Automatic addressing sequence cannot be initiated
Simple wiring method
Easy access
Light weight
20%
weight reduction
(Than Previous model)
By adopting a L-Shape front panel that can be
removed, the work space for installation and service
has been significantly expanded by this new design.
For multiple installations, work is performed easily and
efficiently even in a narrow space.
Expansion of
work space
Note: In the case of 14HP
Easily craned
using lifting belt hooks
Design of outdoor unit allows for
lifting straps to be used
Can be transported in
a small elevator
Flexible piping connection
Piping and wiring are available to the front, left and
right, and bottom.
Automatic address setting
Automatic address setting is
performed at outdoor unit
The address of each indoor unit can be automatically
set by button switch of outdoor unit.
Transporting by
forklift
Transport with forklift is possible.
Press the pushbutton
switch of outdoor unit.
10
Addresses are automatically
distributed from outdoor unit.
3
7
1
0
2
4
5
6
Manual address setting from indoor unit and remote controller is also possible.
11
FEATURES
Auto changeover function
Low noise, easy operational settings,
and comfortable temperature adjustment
allows for V-II systems to be used in
building air conditioning applications.
Auto changeover setting allows for the product to
easily switch between cooling and heating modes
regardless of the operation mode of other indoor units.
This can be done via specific indoor unit with wired
remote controller. This ensures comfortable operation
all year round.
Comfort and
Convenience
Switching to cooling and heating
mode by specific remote controller in
the main room, etc.
Precision refrigerant flow control
Precision and Smooth refrigerant flow control is
achieved by using a DC Inverter control in conjunction
with individual indoor unit electronic expansion valve
control. This allows for a high precision comfortable
temperature control of ±0.5°C.
Quiet operation
Thermal change of the room
±0.5ÛC
High
Set temp.
*Simulation in heating operation.
Hot
Hot
Comfortable operation is
achieved due to a small variation of
room temperature
Cold
Low
Reach the set temperature quickly
Low noise mode
Low noise design
Two low noise modes can be selected automatically by quiet
priority setting and capacity priority setting depending on the
usage environment and outside temperature load.
Compressor noise has been significantly reduced by
shielding the compressor compartment.
The desired temperature conditions of each room are
met due to the Individual thermostat control of each
indoor unit.
Quiet priority setting
Air
conditioning
load factor
Capacity
Simple central management function
Simple central control operation
Simple operation by icon display and
color touch screen
Heat load
100%
down
Yearly schedule function
Daily starting & stopping and
temperature setting are managed.
Room B
18°C
Room A
24°C
0
Operating
sound
Individual air conditioning control
58dB
0
time
Room C
27°C
Quiet priority low noise mode
Room D
OFF
Room E
23°C
7.5 inch large LCD
Touch Panel Controller
Clock setting function
The clock of each individual controller is
periodically corrected.
Capacity priority setting
Air
conditioning
load factor
Heat load
Compressor compartment
Capacity
100%
Alternated
automatically
0
Operating
sound
Indoor unit
58dB
Low noise indoor unit lineup
Schedule screen
0
Reset automatically
time
Capacity priority low noise mode
Compact Cassette
Compact Duct
Non-stop oil recovery operation
A comfortable room condition is maintained during
oil recovery mode because the product continues to
operate without stopping the cooling or heating
operation.
Slim Duct
Previous model
V-II series
Operation stopped at oil recovery
Low Static Pressure Duct
Compact Wall Mounted
12
Non-stop oil recovery operation
ON
ON
OFF
(Heating operation)
Time
Time
13
FEATURES
Designed for Quick Service response,
Easy maintenance and Troubleshooting
Error status can be checked
easily via the indoor unit wired controller
Wired Remote Controller
Simple Remote Controller
Faulty unit number
(Remote controller address)
Error code
An error code is displayed on a liquid crystal screen.
Remote controller address
Error code
SU MO TU WE TH FR SA
Easy Service &
Maintenance
Emergency stop function
Emergency alarm can be received by indoor, outdoor
units or Touch Panel Controller when they received it,
all units will be stopped.
Design for easy service
and maintenance
Inspection and replacement of main parts are easier due to
innovative construction and an LED operational display.
Consolidated electrical components
make maintenance easy
Movable PCB panel that allows for
easier maintenance work behind
the PCB
Note: In case of received Emergency alarm by
Indoor / outdoor unit : All units connected within same
refrigerant system will be stopped.
Touch Panel Controller : all unit connected within VRF
network system with Touch Panel Controller will be stopped.
Emergency
stop function
Touch
T
h Panel
P
l
Controller
Emergency
stop function
Emergency
stop function
Continuous operation during maintenance
Non-stop operation
Outdoor unit
When servicing a specific indoor unit, maintenance
can be performed even without turning off the other
indoor units.
Indoor unit
ON
Easy-to-read 7-segment LED
display which explains operational
and trouble status
OFF
ON
ON
ON
ON
Trouble diagnosis by Service Tool
Maintenance of electrical components, valves, and compressor
parts from the front is possible.
Suitable maintenance is possible by analysis of the
operation data. Connection anywhere in the VRF
network is easy.
Outdoor unit
Service Tool
UTY-ASGX
Software
Transmission line
USB adaptor
(Field supplied)
Split front panel
Split front panel allows for
maintenance from top or
bottom of the outdoor unit
14
Indoor
unit
Equipment Detail (Diagram)
Easy to
carry out with
USB adaptor
Equipment Detail (List)
15
OUTDOOR UNITS
Outdoor Units Lineup
• Extensive line up from 8HP to 48HP in 2HP increments
• Space saving combination and Energy efficiency combination available, which can be selected to suit any air conditioning needs
• Combinations other than the followings are not recommended.
Space saving combination
28.0kW (10HP)
22.4kW (8HP)
33.5kW (12HP)
40.0kW (14HP)
45.0kW (16HP)
50.4kW (18HP)
AJ*A72LALH
AJ*A90LALH
AJ*108LALH
AJ*126LALH
AJ*144LALH
AJ*162LALH
UNIT : AJ*A72LALH
UNIT : AJ*A90LALH
UNIT : AJ*108LALH
UNIT : AJ*126LALH
UNIT : AJ*144LALH
UNIT : AJ*A90/A72LALH
55.9kW (20HP)
61.5kW (22HP)
67.0kW (24HP)
73.5kW (26HP)
78.5kW (28HP)
85.0kW (30HP)
AJ*180LALH
AJ*198LALH
AJ*216LALH
AJ*234LALH
AJ*252LALH
AJ*270LALH
UNIT : AJ*108/A72LALH
UNIT : AJ*108/A90LALH
UNIT : AJ*108/108LALH
UNIT : AJ*126/108LALH
UNIT : AJ*144/108LALH
UNIT : AJ*144/126LALH
90.0kW (32HP)
95.0kW (34HP)
100.5kW (36HP)
107.0kW (38HP)
112.0kW (40HP)
118.5kW (42HP)
AJ*288LALH
AJ*306LALH
AJ*324LALH
AJ*342LALH
AJ*360LALH
AJ*378LALH
UNIT : AJ*144/144LALH
UNIT : AJ*108/108/A90LALH
UNIT : AJ*108/108/108LALH
UNIT : AJ*126/108/108LALH
UNIT : AJ*144/108/108LALH
UNIT : AJ*144/126/108LALH
123.5kW (44HP)
130.0kW (46HP)
135.0kW (48HP)
AJ*396LALH
AJ*414LALH
AJ*432LALH
UNIT : AJ*144/144/108LALH
UNIT : AJ*144/144/126LALH
UNIT : AJ*144/144/144LALH
Energy efficiency combination
62.4kW (22HP)
44.8kW (16HP)
72.8kW (26HP)
67.2kW (24HP)
78.3kW (28HP)
84.8kW (30HP)
AJ*144LALHH
AJ*198LALHH
AJ*216LALHH
AJ*234LALHH
AJ*252LALHH
AJ*270LALHH
UNIT : AJ*A72/A72LALH
UNIT : AJ*126/A72LALH
UNIT : AJ*A72/A72/A72LALH
UNIT : AJ*A90/A72/A72LALH
UNIT : AJ*108/A72/A72LALH
UNIT : AJ*126/A72/A72LALH
89.8kW (32HP)
95.9kW (34HP)
113.5kW (40HP)
102.4kW (36HP)
120.0kW (42HP)
125.0kW (44HP)
AJ*288LALHH
AJ*306LALHH
AJ*324LALHH
AJ*360LALHH
AJ*378LALHH
AJ*396LALHH
UNIT : AJ*108/108/A72LALH
UNIT : AJ*126/108/A72LALH
UNIT : AJ*126/126/A72LALH
UNIT : AJ*126/126/108LALH
UNIT : AJ*126/126/126LALH
UNIT : AJ*144/126/126LALH
AJ* : AJY(FUJITSU), AJH(GENERAL)
16
17
OUTDOOR UNITS
Specifications
Space saving combination
Rating Capacity range
HP
Model name
Unit 1
Unit 2
Unit 3
Maximum Connectable Indoor Unit*1
Indoor unit connectable capacity
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
AJ*A72LALH
AJ*A90LALH
AJ*108LALH
AJ*126LALH
AJ*144LALH
AJ*162LALH
AJ*180LALH
AJ*198LALH
AJ*216LALH
AJ*234LALH
AJ*252LALH
AJ*270LALH
AJ*288LALH
AJ*306LALH
AJ*324LALH
AJ*342LALH
AJ*360LALH
AJ*378LALH
AJ*396LALH
AJ*414LALH
AJ*432LALH
AJ*A72LALH
AJ*A90LALH
AJ*108LALH
AJ*126LALH
AJ*144LALH
AJ*A90LALH
AJ*A72LALH
AJ*108LALH
AJ*A72LALH
AJ*108LALH
AJ*A90LALH
AJ*108LALH
AJ*108LALH
AJ*126LALH
AJ*108LALH
AJ*144LALH
AJ*108LALH
AJ*144LALH
AJ*126LALH
AJ*144LALH
AJ*144LALH
AJ*108LALH
AJ*108LALH
AJ*A90LALH
AJ*108LALH
AJ*108LALH
AJ*108LALH
AJ*126LALH
AJ*108LALH
AJ*108LALH
AJ*144LALH
AJ*108LALH
AJ*108LALH
AJ*144LALH
AJ*126LALH
AJ*108LALH
AJ*144LALH
AJ*144LALH
AJ*108LALH
AJ*144LALH
AJ*144LALH
AJ*126LALH
AJ*144LALH
AJ*144LALH
AJ*144LALH
15
16
17
21
24
32
32
32
35
39
42
45
48
48
48
48
48
48
48
48
48
11.2-33.6
14.0-42.0
16.8-50.2
20.0-60.0
22.5-67.5
25.2-75.6
28.0-83.8
30.8-92.2
33.5-100.5
36.8-110.2
39.3-117.7
42.5-127.5
45.0-135.0
47.5-142.5
50.3-150.7
53.5-160.5
56.0-168.0
59.3-177.7
61.8-185.2
65.0-195.0
67.5-202.5
22.4
28.0
33.5
40.0
45.0
50.4
55.9
61.5
67.0
73.5
78.5
85.0
90.0
95.0
100.5
107.0
112.0
118.5
123.5
130.0
135.0
25.0
31.5
37.5
45.0
50.0
56.5
62.5
69.0
75.0
82.5
87.5
95.0
100.0
106.5
112.5
120.0
125.0
132.5
137.5
145.0
150.0
5.51
7.73
9.62
11.53
14.17
13.24
15.13
17.35
19.24
21.15
23.79
25.70
28.34
26.97
28.86
30.77
33.41
35.32
37.96
39.87
42.51
5.72
7.83
9.28
11.45
12.60
13.55
15.00
17.11
18.56
20.73
21.88
24.05
25.20
26.39
27.84
30.01
31.16
33.33
34.48
36.65
37.80
4.07
3.62
3.48
3.47
3.18
3.81
3.69
3.54
3.48
3.48
3.30
3.31
3.18
3.52
3.48
3.48
3.35
3.36
3.25
3.26
3.18
4.37
4.02
4.04
3.93
3.97
4.17
4.17
4.03
4.04
3.98
4.00
3.95
3.97
4.04
4.04
4.00
4.01
3.98
3.99
3.96
3.97
m3/h
11,100
11,100
11,100
13,000
13,000
11,100 x 2
11,100 x 2
11,100 x 2
11,100 x 2
13,000 + 11,100
13,000 + 11,100
13,000 x 2
13,000 x 2
11,100 x 3
11,100 x 3
13,000 + 11,100 × 2
13,000 + 11,100 × 2
13,000 × 2 + 11,100
13,000 × 2 + 11,100
13,000 x 3
13,000 x 3
dB
(A)
56
58
58
60
61
60
60
61
61
62
63
64
64
63
63
64
64
65
65
65
66
58
59
60
61
61
62
62
63
63
64
64
64
64
64
65
65
65
65
65
66
66
kW
Cooling
Power source
Capacity
Input power
3 Phase ~ 400 V, 50Hz
3 Phase ~ 400 V, 50Hz
Cooling
kW
Heating
Cooling
kW
Heating
EER
Cooling
COP
Heating
Air flow rate
High
Sound
pressure level*2
Cooling
W/W
Heating
Maximum external static pressure
Pa
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
Compressor motor output
kW
3.9
3.9
3.9 + 4.5
3.9 + 4.5
3.9 + 4.5
3.9 x 2
3.9 x 2 + 4.5
3.9 x 2 + 4.5
3.9 x 2 + 4.5 x 2
3.9 x 2 + 4.5 x 2
3.9 x 2 + 4.5 x 2
3.9 x 2 + 4.5 x 2
3.9 x 2 + 4.5 x 2
3.9 x 3 + 4.5 x 2
3.9 x 3 + 4.5 x 3
3.9 x 3 + 4.5 x 3
3.9 x 3 + 4.5 x 3
3.9 x 3 + 4.5 x 3
3.9 x 3 + 4.5 x 3
3.9 x 3 + 4.5 x 3
3.9 x 3 + 4.5 x 3
Blue fin
Heat exchanger fin
Dimensions
Blue fin
Blue fin
Blue fin
Blue fin
Blue fin
Blue fin
Blue fin
Blue fin
Blue fin
Blue fin
Blue fin
Blue fin
Blue fin
Blue fin
Blue fin
Blue fin
Blue fin
Blue fin
Blue fin
Blue fin
Height
mm
1,690
1,690
1,690
1,690
1,690
1,690
1,690
1,690
1,690
1,690
1,690
1,690
1,690
1,690
1,690
1,690
1,690
1,690
1,690
1,690
1,690
Width
mm
930
930
930
1,240
1,240
930 x 2
930 x 2
930 x 2
930 x 2
930 + 1,240
930 + 1,240
1,240 x 2
1,240 x 2
930 x 3
930 x 3
930 x 2 + 1,240
930 x 2 + 1,240
930 + 1,240 x 2
930 + 1,240 x 2
1,240 x 3
1,240 x 3
765
765
765
765
765
765
765
765
765
765
765
765
765
765
765
765
765
765
765
765
765
220
220
275
303
303
220 + 220
275 + 220
275 + 220
275 + 275
303 + 275
303 + 275
303 + 303
303 + 303
275 + 275 + 220
275 + 275 + 275
303 + 275 + 275
303 + 275 + 275
303 + 303 + 275
303 + 303 + 275
303 + 303 + 303
303 + 303 + 303
Depth
mm
Weight
kg
Refrigerant charge
kg
Connection
pipe diameter
Liquid
Operation
range
Cooling
mm
Gas
ÛC
Heating
11.2
11.2
11.8
11.8
11.8
11.2 x 2
11.8 + 11.2
11.8 + 11.2
11.8 x 2
11.8 x 2
11.8 x 2
11.8 x 2
11.8 x 2
11.8 x 2 + 11.2
11.8 x 3
11.8 x 3
11.8 x 3
11.8 x 3
11.8 x 3
11.8 x 3
11.8 x 3
12.70
12.70
12.70
12.70
12.70
15.88
15.88
15.88
15.88
15.88
15.88
19.05
19.05
19.05
19.05
19.05
19.05
19.05
19.05
19.05
19.05
22.22
22.22
28.58
28.58
28.58
28.58
28.58
34.92
34.92
34.92
34.92
34.92
34.92
34.92
41.27
41.27
41.27
41.27
41.27
41.27
41.27
-15 to 46
-15 to 46
-15 to 46
-15 to 46
-15 to 46
-5 to 46
-5 to 46
-5 to 46
-5 to 46
-5 to 46
-5 to 46
-5 to 46
-5 to 46
-5 to 46
-5 to 46
-5 to 46
-5 to 46
-5 to 46
-5 to 46
-5 to 46
-5 to 46
-20 to 21
-20 to 21
-20 to 21
-20 to 21
-20 to 21
-20 to 21
-20 to 21
-20 to 21
-20 to 21
-20 to 21
-20 to 21
-20 to 21
-20 to 21
-20 to 21
-20 to 21
-20 to 21
-20 to 21
-20 to 21
-20 to 21
-20 to 21
-20 to 21
Energy efficiency combination
Rating Capacity range
HP
Model name
Unit 1
Unit 2
Unit 3
Maximum Connectable Indoor Unit*1
Indoor unit connectable capacity
Cooling
16
22
24
26
28
30
32
34
36
40
42
44
AJ*144LALHH
AJ*198LALHH
AJ*216LALHH
AJ*234LALHH
AJ*252LALHH
AJ*270LALHH
AJ*288LALHH
AJ*306LALHH
AJ*324LALHH
AJ*360LALHH
AJ*378LALHH
AJ*396LALHH
AJ*A72LALH
AJ*A72LALH
AJ*126LALH
AJ*A72LALH
AJ*A72LALH
AJ*A72LALH
AJ*A72LALH
AJ*A90LALH
AJ*A72LALH
AJ*A72LALH
AJ*108LALH
AJ*A72LALH
AJ*A72LALH
AJ*126LALH
AJ*A72LALH
AJ*A72LALH
AJ*108LALH
AJ*108LALH
AJ*A72LALH
AJ*126LALH
AJ*108LALH
AJ*A72LALH
AJ*126LALH
AJ*126LALH
AJ*A72LALH
AJ*126LALH
AJ*126LALH
AJ*108LALH
AJ*126LALH
AJ*126LALH
AJ*126LALH
AJ*144LALH
AJ*126LALH
AJ*126LALH
30
33
36
39
42
45
48
48
48
48
48
48
22.4-67.2
31.2-93.6
33.6-100.8
36.4-109.2
39.2-117.4
42.4-127.2
44.7-134.1
48.0-143.8
51.2-153.6
56.8-170.2
60.0-180.0
62.5-187.5
44.8
62.4
67.2
72.8
78.3
84.8
89.4
95.9
102.4
113.5
120.0
125.0
50.0
70.0
75.0
81.5
87.5
95.0
100.0
107.5
115.0
127.5
135.0
140.0
11.02
17.04
16.53
18.75
20.64
22.55
24.75
26.66
28.57
32.68
34.59
37.23
11.44
17.17
17.16
19.27
20.72
22.89
24.28
26.45
28.62
32.18
34.35
35.50
4.07
3.66
4.07
3.88
3.79
3.76
3.61
3.60
3.58
3.47
3.47
3.36
4.37
4.08
4.37
4.23
4.22
4.15
4.12
4.06
4.02
3.96
3.93
3.94
m3/h
11,100 x 2
13,000 + 11,100
11,100 x 3
11,100 x 3
11,100 x 3
13,000 + 11,000 x 2
11,100 x 3
13,000 + 11,100 x 2
13,000 x 2 + 11,100
13,000 x 2 + 11,100
13,000 x 3
13,000 x 3
dB
(A)
59
61
61
62
62
63
62
63
64
64
65
65
59
62
61
62
63
63
64
64
65
65
66
66
kW
Power source
Capacity
Input power
3 Phase ~ 400 V, 50Hz
Cooling
Heating
Cooling
Heating
EER
Cooling
COP
Heating
Air flow rate
High
Sound
pressure level*2
Cooling
Heating
kW
kW
W/W
3 Phase ~ 400 V, 50Hz
Maximum external static pressure
Pa
80
80
80
80
80
80
80
80
80
80
80
80
Compressor motor output
kW
3.9 x 2
3.9 x 2 + 4.5
3.9 x 3
3.9 x 3
3.9 x 3 + 4.5
3.9 x 3 + 4.5
3.9 × 3 + 4.5 × 2
3.9 x 3 + 4.5 x 2
3.9 x 3 + 4.5 x 2
3.9 x 3 + 4.5 x 3
3.9 x 3 + 4.5 x 3
3.9 x 3 + 4.5 x 3
Blue fin
Heat exchanger fin
Dimensions
Blue fin
Blue fin
Blue fin
Blue fin
Blue fin
Blue fin
Blue fin
Blue fin
Blue fin
Blue fin
Blue fin
Height
mm
1,690
1,690
1,690
1,690
1,690
1,690
1,690
1,690
1,690
1,690
1,690
1,690
Width
mm
930 x 2
930 + 1,240
930 x 3
930 x 3
930 x 3
930 x 2 + 1,240
930 × 3
930 x 2 + 1,240
930 + 1,240 x 2
930 + 1,240 x 2
1,240 x 3
1,240 x 3
Depth
Weight
mm
kg
Refrigerant charge
kg
Connection
pipe diameter
Liquid
Operation
range
Cooling
Gas
Heating
mm
ÛC
765
765
765
765
765
765
765
765
765
765
765
765
220 + 220
303 + 220
220 + 220 + 220
220 + 220 + 220
275 + 220 + 220
303 + 220 + 220
275 + 275 + 220
303 + 275 + 220
303 + 303 + 220
303 + 303 + 275
303 + 303 + 303
303 + 303 + 303
11.2 x 2
11.8 + 11.2
11.2 x 3
11.2 x 3
11.8 + 11.2 x 2
11.8 + 11.2 x 2
11.8 × 2 + 11.2
11.8 x 2 + 11.2
11.8 x 2 + 11.2
11.8 x 3
11.8 x 3
11.8 x 3
12.70
15.88
15.88
15.88
15.88
19.05
19.05
19.05
19.05
19.05
19.05
19.05
28.58
34.92
34.92
34.92
34.92
34.92
34.92
34.92
41.27
41.27
41.27
41.27
-5 to 46
-5 to 46
-5 to 46
-5 to 46
-5 to 46
-5 to 46
-5 to 46
-5 to 46
-5 to 46
-5 to 46
-5 to 46
-5 to 46
-20 to 21
-20 to 21
-20 to 21
-20 to 21
-20 to 21
-20 to 21
-20 to 21
-20 to 21
-20 to 21
-20 to 21
-20 to 21
-20 to 21
AJ* : AJY(FUJITSU), AJH(GENERAL)
18
Note : Specifications are based on the following conditions.
Cooling : Indoor temperature of 27°CDB / 19°CWB, and outdoor temperature of 35°CDB / 24°CWB.
Heating : Indoor temperature of 20°CDB / (15°CWB), and outdoor temperature of 7°CDB / 6°CWB.
Pipe length : 7.5 m; Height difference between outdoor unit and indoor unit : 0 m.
When cooling operation will be conducted at outdoor air temperature below -5°C,
the outdoor unit must be installed in a position that is higher than or equal to those of indoor units.
*1 Minimum connectable indoor unit number is 2.
However ARXC72 and ARXC90 can be used signal connection.
*2 The noise value is the value when measured in an anechoic room.
When measured in the actual installed state, surrounding noise and reflections are
received and the measured value is usually larger than the indicated value.
19
OUTDOOR UNITS
Dimensions
(Unit : mm)
8, 10, 12HP
AJ*A72LALH / AJ*A90LALH / AJ*108LALH
(Unit : mm)
14, 16HP
AJ*126LALH / AJ*144LALH
690 (Bolt pitch)
1000 (Bolt pitch)
80 530 (Bolt pitch)
80
840 (Bolt pitch)
8-12×17 (Hole)
732 (Bolt pitch)
732 (Bolt pitch)
8-12×7 (Hole)
765
B
1690
1339
1576
1690
765
A
B
C
A
930
B
Front side knockout position
Left side knockout position
Ø 34.5
Power supply cable port
Ø 43.7
Power supply cable port
73
43
Ø 50
Power supply
cable port
Ø 22.2
Transmission cable port
Ø 22.2
Transmission
cable port
75
95
1240
Ø 50
Power supply
cable port
Ø 22.2
Transmission
cable port
Bottom side knockout position
Ø 34.5
Power supply cable port
Top view
Pipe port
Ø 43.7
Power supply cable port
Ø 22.2
Transmission
cable port
100
82
10
Pipe port
C
80
A
C
125
199
42
197
AJ* : AJY(FUJITSU), AJH(GENERAL)
20
21
INDOOR UNITS
Indoor Unit Lineup
Comprehensive range of indoor units of variety design and capacity ranges
available which can be selected to suit any air conditioning needs.
11 Types, 51 Models, Capacity range from 2.2kW to 25.0kW
Capacity range (kW)
Model code
2.2
2.8
3.6
4.5
5.6
7.1
9.0
11.2
12.5
14.0
18.0
22.4
25.0
7
9
12
14
18
24
30
36
45
54
60
72
90
Compact Cassette
AUXB07GALH AUXB09GALH AUXB12GALH AUXB14GALH
AUXB18GALH AUXB24GALH
Cassette
Cassette
AUXD18GALH AUXD24GALH AUXA30GALH AUXA36GALH AUXA45GALH AUXA54GALH
Low Static Pressure Duct
ARXB07GALH ARXB09GALH ARXB12GALH ARXB14GALH
ARXB18GALH
ARXD07GALH ARXD09GALH ARXD12GALH ARXD14GALH
ARXD18GALH ARXD24GALH
Slim Duct
(Drain pump internal)
Duct
Medium Static Pressure Duct
ARXA24GBLH ARXA30GBLH ARXA36GBLH ARXA45GBLH
High Static Pressure Duct
ARXC36GATH ARXC45GATH
ARXC60GATH ARXC72GATH ARXC90GATH
Floor
(*Same as Ceiling models)
AB*A12GATH
Floor
AB*A14GATH
AB*A18GATH
AB*A24GATH
ARXB07GALH ARXB09GALH ARXB12GALH ARXB14GALH
ARXB18GALH
ARXD07GALH ARXD09GALH ARXD12GALH ARXD14GALH
ARXD18GALH ARXD24GALH
Concealed Floor
(*Same as Low Static Pressure Duct models)
Slim Concealed Floor
(*Same as Slim Duct models)
Ceiling
Ceiling
AB*A12GATH
AB*A14GATH
AB*A18GATH
AB*A24GATH
AB*A30GATH
AB*A36GATH
AB*A45GATH
AB*A54GATH
Wall Mounted
AS*A07GACH
Wall Mounted
AS*A09GACH AS*A12GACH AS*A14GACH
AS*A18GACH AS*A24GACH AS*A30GACH
Wall Mounted
(EEV external)
AS*E07GACH AS*E09GACH AS*E12GACH AS*E14GACH
With this model, connection of EV kit is necessary.
AB* : ABY(FUJITSU), ABH(GENERAL)
22
AS* : ASY(FUJITSU), ASH(GENERAL)
23
INDOOR UNITS
Compact Cassette
High lift drain pump
Improvement of the airflow distribution
Models
AUXB07GALH
AUXB09GALH
AUXB12GALH
AUXB14GALH
AUXB18GALH
AUXB24GALH
Ceiling panel
Max.
700mm
1
A
B
C
D
3
High ceiling mode
Compact size panel design
that fits standard ceiling panel (600x600mm)
2
The compact cassette can be installed up to a height of 3.0m
(12/14/18/24).
Grille cover
The maximum height from floor to ceiling (m)
1
Quiet quality
High efficiency design by 2 stage structure
Optimization of wing form (laminar wing type) and
wing number (7 blades each)
2-stage turbo fan
1-stage
+
2-stage
Heat exchange
efficiency
=
A : Fan motor
C : Bell-mouth
Designed by CFD-analysis (fluid) simulations
Adoption of laminar wing
Wind velocity
Fast
Model code
Maintenance of the fan motor and fan can be done easily after
taking off the panel as the bell mouth of the fan can be
removed easily.
2-stage turbo fan
An evenly spread air distribution across the heat
exchanger is possible due to the new 2 stage turbo
fan which produces two separate airflow streams.
Maintenance of fan motor and fan
Quiet
Long life filter : standard equipment
3
Adaptation of transparent drainage parts
High ceiling mode
2.7
2.7
2.7
2.7
2.7
2.7
3.0
3.0
3.0
3.0
07
09
12
14
18
24
B : 2-stage turbo fan
D : Panel
2
Standard mode
During installation, maintenance and operation,
the drain pump and kit can be checked easily.
Laminar wing
Airflow runs through smoothly along
the laminar wing
20%UP
Slow
Compact design
570mm
570mm
Spin direction
No airflow separation
Airflow direction
Specifications
Dimensions
Model name
AUXB07GALH
AUXB09GALH
AUXB12GALH
AUXB18GALH
AUXB24GALH
2.2
2.8
3.6
4.5
5.6
7.1
2.8
3.2
25
25
4.1
5.0
6.3
8.0
29
35
36
540
550
84
600
680
710
1,030
Power source
Models: AUXB07 / AUXB09 / AUXB12 / AUXB14 / AUXB18 / AUXB24
450
530
590
580
830
350
390
390
400
450
High
34
35
37
38
41
50
30
30
34
34
35
44
25
25
27
27
27
30
dB(A)
Low
mm
kg
Liquid (Flare)
Gas (Flare)
mm
Drain
Weight
17
ø9.52
ø12.70
ø15.88
146
285
285
183
40
ø25 (I.D) ; ø32 (O.D.)
Model name
Dimensions (H x W x D)
15
ø6.35
UTG-UF*C-W
mm
50 x 700 x 700
kg
2.6
F* : FY (FUJITSU) ; FG(GENERAL)
Note : Specifications are based on the following conditions.
Cooling : Indoor temperature of 27ÛCDB / 19ÛCWB, and outdoor temperature of 35ÛCDB / 24ÛCWB.
Heating : Indoor temperature of 20ÛCDB / (15ÛCWB), and outdoor temperature of 7ÛCDB / 6ÛCWB.
Pipe length : 7.5 m; Height difference between outdoor unit and indoor unit : 0 m. Voltage : 230 [V].
Ceiling
Gas pipe
Control Box
Liquid pipe
262
Connection
pipe diameter
Drain hose
30
Weight
IR receiver
245 x 570 x 570
123
Dimensions (H x W x D)
30
Med
370
450
350
19
Sound pressure level
m 3/h
Low
Med
Ƒ 570 : Indoor unit
High
215
Airflow rate
530
W
114
Input power
700
kW
530
Hanging bolt position
700
114
Cooling
Heating
24
(Unit : mm)
230V ~, 50Hz
Capacity
Cassette
Grille
AUXB14GALH
Air Outlet Shutter Plate :
UTR-YDZB
Insulation Kit for High Humidity : UTZ-KXGC
Fresh Air Intake Kit :
UTZ-VXAA
Ƒ 580 to 660
Ceiling openings
Quiet
In the case of a previous fan, the air outlet range was narrow
as the airflow moved to the motor side which meant the velocity
of air passing through the heat exchanger was uneven.
Optional parts
Worlds first 24,000Btu model in the
compact cassette category
(Easy installation by taking off ceiling
panel of 600 x 600 size)
540
Hanging bolt position
Previous turbo fan
25
INDOOR UNITS
Cassette
Improvement of the airflow distribution
Models
AUXD18GALH
AUXD24GALH
AUXA30GALH
AUXA36GALH
AUXA45GALH
AUXA54GALH
High lift drain pump
The louvre design distributes air
leaving a space between the
chassis and the ceiling allowing far
and wide air flow distribution.
Front part
Ceiling panel
Ceiling
Bottom view
Rear part
Powerful, wide airflow and quiet operation
Max.
850mm
High ceiling mode
Much less temperature irregularity
happens by spreading airflow widely
Round louvre
This cassette can be installed up to a height of 4.2m (36/45/54).
The maximum height from floor to ceiling (m)
Model code
Adjustment of hanger position is
possible after installation
High ceiling mode
3.0
3.0
3.2
3.2
3.2
3.2
3.5
3.5
3.6
4.2
4.2
4.2
18
24
30
36
45
54
High efficiency turbo fan with 3-dimensional blade
Detachable
Grille corner
High efficiency airflow distribution has been achieved by the introduction of a 3
dimensional blade which increases the air passing over the heat exchanger.
Standard mode
Previous turbo fan
Air passing through the heat exchanger was uneven and the air
would only flow close to the ceiling.
Adjustment can be done
just taking off the corner part
500mm
450mm
3-dimensional blade
Previous blade
Optional parts
One way aperture installation
Heat exchanger
< Motor side >
Heat exchanger
< Motor side >
Wind velocity
Fast
Separation
phenomenon of
airflow
causes noise
Quiet
Parallel
apertures
No airflow separation
Uneven airflow
Slow
: Turbulent flow noise
Dimensions
AUXA30GALH
AUXA36GALH
AUXA45GALH
AUXA54GALH
230V ~, 50Hz
5.6
7.1
9.0
11.2
12.5
14.0
6.3
8.0
10.0
12.5
14.0
16.0
39
46
59
80
99
119
1,150
1,280
1,600
1,800
1,900
2,000
940
1,040
1,300
1,300
1,370
1,370
Low
870
870
1,100
1,100
1,100
1,100
High
36
38
40
44
46
47
30
33
38
38
39
39
29
29
33
33
33
33
W
High
Med
dB(A)
Low
Dimensions (H x W x D)
Weight
Connection
pipe diameter
mm
246 x 840 x 840
kg
22
27
mm
Weight
ø15.88
ø19.05
358
(Control) Box
ø25 (I.D.) ; ø32 (O.D.)
Drain
Model name
Dimensions (H x W x D)
Drain hose
ø9.52
Liquid (Flare)
Gas (Flare)
288 x 840 x 840
358
278
mm
50 x 950 x 950
kg
5.5
G* : GY(FUJITSU) ; GG(GENERAL)
Note : Specifications are based on the following conditions.
Cooling : Indoor temperature of 27ÛCDB / 19ÛCWB, and outdoor temperature of 35ÛCDB / 24ÛCWB.
Heating : Indoor temperature of 20ÛCDB / (15ÛCWB), and outdoor temperature of 7ÛCDB / 6ÛCWB.
Pipe length : 7.5 m; Height difference between outdoor unit and indoor unit : 0 m. Voltage : 230 [V].
60
40
UTG-UG*A-W
298(256)
Sound pressure level
m3/h
200
Med
796
Hanging bolt position
950
Ceiling
10
Airflow rate
IR receiver
(Option)
142
Input power
kW
142
Heating
Liquid pipe
Gas pipe
44
140
Cooling
Capacity
Models: AUXD18 / AUXD24 (Slim type)
AUXA30 / AUXA36 / AUXA45 / AUXA54
420
699
Hanging bolt position
Ƒ 860 to 910
Ceiling opening
AUXD24GALH
Ƒ 840 : Indoor unit
AUXD18GALH
Power source
607
Model name
(Unit : mm) ( ) : AUXD18 / AUXD24
950
: Airflow direction
Specifications
26
UTY-LRH*B1
UTR-YDZC
UTG-BGYA-W
UTZ-KXGA / UTZ-KXGB
UTG-AGYA-W
UTZ-VXGA
H*: HY(FUJITSU), HG(GENERAL)
: Spin direction
Cassette
Grille
IR Receiver Unit :
Air Outlet Shutter Plate :
Panel Spacer :
Insulation Kit for High Humidity :
Wide Panel :
Fresh Air Intake Kit :
Wire hole
27
INDOOR UNITS
Low Static Pressure Duct / Concealed Floor
Models
ARXB07GALH
ARXB09GALH
ARXB12GALH
ARXB14GALH
ARXB18GALH
Compact design
Flexible installation
Ultra-slim duct air conditioner for easy installation
Ceiling concealed
Height
217mm
ARXB07GALH
ARXB09GALH
ARXB12GALH
ARXB14GALH
ARXB18GALH
Slim size (217mm) allows installation even where the space
behind the ceiling is narrow.
Floor concealed
Small and compact indoor unit suitable
for many applications
Concealed Floor
Two-direction drain piping
Filter (Accessory)
ARXB07 / ARXB09
Duct indoor unit
Low noise level
Filter
(2pcs.)
Two-direction drain piping
Low static pressure
mode
Model
7
Static pressure
range
Pa
Noise level
(Low speed)
dB(A)
9
12
14
Airflow drop
prevention
Air-intake
Air intake direction can be selected to match the installation site.
Low noise
realized
18
Optional parts
0 to 50
24
27
25
30
Filter
(3pcs.)
Normal mode
Airflow
A low noise level has been achieved for each capacity
ARXB12 / ARXB14 /
ARXB18
Remote Sensor Unit : UTY-XSZX
IR Receiver Unit :
UTB-YWC
Drain Pump Unit :
UTZ-PX1BBA
30
Bottom side
Back side
Static pressure (Pa)
Specifications
Dimensions
ARXB07GALH
ARXB09GALH
ARXB12GALH
Power source
High
Med
dB(A)
Low
Dimensions (H x W x D)
Weight
Connection
pipe diameter
96
886 (596)
370
440
590
800
890
(Bolt pitch)
310
370
500
750
810
280
340
450
700
730
0 to 50
0 to 50
0 to 50
0 to 50
0 to 50
25
25
25
25
25
29
31
30
33
36
26
29
28
32
34
24
27
25
30
30
kg
15
mm
Note : Specifications are based on the following conditions.
ø6.35
ø9.52
ø15.88
Brackets
2
47
850 (560)
85
150
Airflow outlet
953 (663)
94 (50)
ø25 (I.D.) ; ø32 (O.D.)
Cooling : Indoor temperature of 27ÛCDB / 19ÛCWB, and outdoor temperature of 35ÛCDB / 24ÛCWB.
Heating : Indoor temperature of 20ÛCDB / (15ÛCWB), and outdoor temperature of 7ÛCDB / 6ÛCWB.
Pipe length : 7.5 m; Height difference between outdoor unit and indoor unit : 0 m.
Brackets
3
23
ø12.70
217
194
Control box
1
24
217 x 953 x 595
22
170
90
217 x 663 x 595
Drain
28
63
mm
Liquid (Flare)
Gas (Flare)
55
364
Sound pressure level
6.3
46
65 75
Pa
Standard static pressure
5.6
5.0
587
Static pressure range
4.5
4.0
390
m3/ h
Low
3.6
3.2
(Bolt pitch)
Med
2.8
2.8
595
High
2.2
166
W
Input power
886 (596)
*Service accessibility must be allowed for when installing the product.
Please consult the installation manual for the necessary service access size.
20
kW
Models: ARXB07 / ARXB09 / ARXB12 / ARXB14 / ARXB18
Control box
600 (400)
10
Cooling
Heating
Airflow rate
ARXB18GALH
150
Capacity
ARXB14GALH
230V ~, 50Hz
217
Model name
(Unit : mm) ( ) : AR7 / AR9
1 Refrigerant piping flare connection (Gas)
2 Refrigerant piping flare connection (Liquid)
3 Drain piping connection
29
INDOOR UNITS
Slim Duct / Slim Concealed Floor
Models (Drain pump internal model)
Auto Louver Grille Kit (Option)
High lift drain pump
ARXD07GALH
ARXD09GALH
ARXD12GALH
ARXD14GALH
ARXD18GALH
ARXD24GALH
Simple flat Auto Louver will provide comfort airflow and harmonize
with luxury interior.
Max.
850mm
ARXD07GALH
ARXD09GALH
ARXD12GALH
ARXD14GALH
Slim Duct
Auto Louver Grille
ARXD18GALH
Drain hose is standard accessory
Selectable with a wide range of
static pressure
Slim design and wide range of
static pressure for flexible installation.
ARXD24GALH
Slim Concealed Floor
By using DC fan motor, it is possible
to change of static pressure range 0
to 90Pa.
The change of static pressure range
is possible by remote controller.
Wired Remote
Controller
Wireles Remote
Controller
Static pressure range
Filter (Accessory)
0 to 90 Pa
ARXD07 / 09 / 12 / 14 / 18
*24 model is 0 to 50Pa
Filter
(2pcs.)
ARXD24
Filter
(3pcs.)
Flexible installation
Ceiling concealed
Slim design
Air-intake
This model is slim design, it can install
at the place where a ceiling is narrow.
Air intake direction can be selected
to match the installation site.
Optional parts
Floor concealed
Drain port
Remote Sensor Unit : UTY-XSZX
IR Receiver Unit :
UTB-YWC
Auto Louver Grille Kit : UTD-GXSA-W (for ARXD07/09/12/14GALH)
UTD-GXSB-W (for ARXD18GALH)
UTD-GXSC-W (for ARXD24GALH )
Height
198mm
Bottom side
Back side
Specifications
Dimensions
High
Med
m3/ h
Low
Static pressure range
2.8
3.6
4.5
5.6
2.8
3.2
4.0
5.0
6.3
8.0
44
50
54
92
83
122
550
600
600
800
940
1,330
490
550
510
710
840
1,240
440
480
450
610
750
1,100
0 to 90
0 to 90
0 to 90
0 to 90
0 to 90
0 to 50
25
25
25
25
25
25
28
29
30
34
34
35
25
26
27
32
32
32
7.1
dB(A)
Low
kg
Weight
Connection
pipe diameter
22
Liquid (Flare)
Gas (Flare)
mm
Drain
Note : Specifications are based on the following conditions.
30
24
24
mm
Dimensions (H x W x D)
28
198 x 700 x 620
17
18
28
29
198 x 900 x 620
198 x 1,100 x 620
22
26
ø6.35
ø9.52
ø12.70
ø15.88
ø25 (I.D.) ; ø32 (O.D.)
Cooling : Indoor temperature of 27ÛCDB / 19ÛCWB, and outdoor temperature of 35ÛCDB / 24ÛCWB.
Heating : Indoor temperature of 20ÛCDB / (15ÛCWB), and outdoor temperature of 7ÛCDB / 6ÛCWB.
Pipe length : 7.5 m; Height difference between outdoor unit and indoor unit : 0 m.
30
48
F
(All surroundings)
E
D
C
(Bolt pitch)
43
78
Med
168
High
198
Sound pressure level
G
82
Pa
Standard static pressure
51
174
W
Input power
2.2
B
A
31
10
ARXD07-14
ARXD18
ARXD24
A
700
900
1100
B
650
850
1050
C
734
934
1134
D
650
850
1050
E
P100x6=600
P100x8=800
P100x10=1000
F
18xØ5
22xØ5
26xØ5
G
574
774
974
47
kW
78
55
Heating
Airflow rate
*Service accessibility must be allowed for when installing the product.
Please consult the installation manual for the necessary service access size.
230V ~, 50Hz
Cooling
Models: ARXD07 / ARXD09 / ARXD12 / ARXD14 / ARXD18 / ARXD24
89
Capacity
ARXD24GALH
ARXD18GALH
152
71
Power source
ARXD14GALH
30
ARXD12GALH
377
ARXD09GALH
(Bolt pitch)
ARXD07GALH
Model name
(Unit : mm)
119
Drain pump
163
Drain pump built-in
69
144
264
367
620
31
INDOOR UNITS
Medium Static Pressure Duct
Models
Selectable with a wide range of
static pressure
ARXA24GBLH
ARXA30GBLH
ARXA36GBLH
ARXA45GBLH
It is possible to change of static
pressure range 0 to 150Pa.
Easy maintenance
See below for the case of rear suction type
Static pressure range
New model
1
0 to 150 Pa
1.Control box
2.Fan casing
4
3.Fan
4.Motor
Can be installed for various location
Low energy consumption by DC fan motor.
Selectable with a wide range of static pressure.
It can be installed in such
locations as high-rise
condominiums by low static
pressure design.
3
2
It can also be installed in wide
spade when high static
pressure is required, such as
for offices.
Bottom panel: 2 pieces
The maintenance of the motor and fan can be easily carried out by removing
the rear panel and the lower part of the casing while leaving the main
chassis installed.
Installation styles
Slim & Compact design
In the case of bottom return air connection, not only does the indoor
unit design allow for installation in a narrow ceiling space of up to
270mm, Further space savings have been achieved by mounting
the electrical control box internally inside the chassis.
1,200
Easy setting by using remote controller
Low energy consumption by
high efficiency DC fan motor
Improved motor efficiency from previous model.
NEW
1,135mm
Embedded in Ceiling
The change of static
pressure range is possible
by remote controller
NEW
Hanging from Ceiling
Two-direction drain
piping
Control box is now included as
part of the main chassis
270mm
Optional parts
One touch operating and easy
to install long life filter
(Optional Parts)
24 model
Duct indoor unit
Two-direction drain piping
30 / 36 / 45 model
Specifications
Dimensions
Model name
ARXA24GBLH
ARXA30GBLH
7.1
ARXA36GBLH
ARXA45GBLH
9.0
11.2
12.5
8.0
10.0
12.5
14.0
94
108
194
240
1,280
1,410
1,840
1,970
990
1,280
1,600
1,860
840
1,150
1,470
1,640
Power source
230V ~, 50Hz
Cooling
Capacity
Remote Sensor Unit : UTY-XSZX
Long Life Filter :
UTD-LF25NA
Flange (Square) :
UTD-SF045T
Flange (Round) : UTD-RF204
IR Receiver Unit : UTB-YWC
Drain Pump Unit : UTZ-PX1NBA
(Unit : mm)
Models: ARXA24 / ARXA30 / ARXA36 / ARXA45
*Service accessibility must be allowed for when installing the product.
Please consult the installation manual for the necessary service access size.
kW
Pa
Standard static pressure
Sound pressure level
High
Med
dB(A)
Low
kg
Weight
0 to 150
0 to 150
50
50
60
31
34
37
41
27
32
35
38
23
29
33
36
36
Gas (Flare)
264
82
ø205 hole
Note : Specifications are based on the following conditions.
ø15.88
75
168
1
3
2
P.C.D. ø225
40
121
ø9.52
mm
3
240
281
264
Front view
270 x 1,135 x 700
Liquid (Flare)
Drain
32
0 to 150
40
mm
Dimensions (H x W x D)
Connection
pipe diameter
0 to 150
264
700
Static pressure range
138
ø200
(knock
out hole)
447(Bolt pitch)
m 3/h
Low
173
Med
114
66
32
1177(Bolt pitch)
Outlet
270
32
161
High
Airflow rate
240
W
Input power
138
Heating
1015
1135
107
240
270
Top view
ø19.05
Side view (R)
Side view (L)
ø25 (I.D.) ; ø32 (O.D.)
Cooling : Indoor temperature of 27ÛCDB / 19ÛCWB, and outdoor temperature of 35ÛCDB / 24ÛCWB.
Heating : Indoor temperature of 20ÛCDB / (15ÛCWB), and outdoor temperature of 7ÛCDB / 6ÛCWB.
Pipe length : 7.5 m; Height difference between outdoor unit and indoor unit : 0 m.
1 Refrigerant piping flare connection (Liquid) :
2 Refrigerant piping flare connection (Gas) :
3 Drain piping connection (Drain pipe)
Rear view
33
INDOOR UNITS
High Static Pressure Duct
Models
Easy installation (Compact size & Lightweight)
Static pressure selection
ARXC36GATH
ARXC45GATH
ARXC60GATH
ARXC72GATH
ARXC90GATH
Models : ARXC36
Models : ARXC72 / ARXC90
A compact size and lightweight indoor unit has been developed by
reducing the basic chassis and the overall material weight.
2 Types of static pressure mode are selectable.
These indoor units allow for high airflow quantities
Weight
47.5%
42%
down
Air flow
Volume
High Static Pressure Duct (ARXC72)
Normal mode High static pressure mode
500
1,050
400
down
Max.
ARXC36GATH : 43kg (unit: mm)
300Pa
ARXC36GATH
ARXC45GATH
ARXC60GATH
0
Low noise
Static pressure (Pa)
The adoption of a single phase fan motor allows
3 steps fan speed control
Models : ARXC36 / ARXC45 / ARXC60
Cutting off the corners of the conventional indoor unit front panel
and fan casing, has enabled less turbulent air flow. Low noise is
realized by adopting a plastic case and a plastic fan.
Previous model
New model
(ARXC36GATH)
* Model : Material
(At 100Pa : Actual noise measurement value)
500mm
Plastic fan Heat
ø225mm exchanger
Optional parts
Long-Life Filter :
UTD-LF60KA (For ARXC36 / 45 / 60)
IR Receiver Unit :
UTB-YWC
Remote Sensor Unit : UTY-XSZX
Casing (Plastic)
Specifications
Dimensions
(Unit : mm)
400
ARXC36GATH
Model name
ARXC45GATH
ARXC60GATH
Power source
Models: ARXC36 / ARXC45 / ARXC60
324
230V ~, 50Hz
Cooling
Input power
12.5
18.0
22.4
25.0
12.5
14.0
20.0
25.0
28.0
W
405
715
730
1,110
1,250
2,600
3,500
3,500
3,900
4,300
m3/ h
1,950
3,000
3,000
3,300
4,000
1,450
2,460
2,460
3,000
3,500
100 to 200
100 to 250
100 to 250
50 to 300
100 to 300
100
100
100
260
250
45
49
49
51
53
38
45
45
48
51
42
42
45
High
Med
14
108
88
11.2
kW
Heating
Airflow rate
ARXC90GATH
585
500(Bolt pitch)
Capacity
ARXC72GATH
371
356
208
1,080(Bolt pitch)
1,000
862
1
2
3
71
Rear view
4
Sound pressure level
High
Med
dB(A)
32
Low
mm
Dimensions (H x W x D)
kg
Weight
Connection
pipe diameter
Liquid
Gas
mm
Drain
Note : Specifications are based on the following conditions.
400 x 1,050 x 500
43
49
Side view (L)
Side view (R)
85
1 Refrigerant piping flare connection (Liquid)
2 Refrigerant piping flare connection (Gas)
3 Drain piping connection
450 x 1,550 x 700
46
Front view
85
83
ø9.52 (Flare)
ø12.70 (Brazing)
ø19.05 (Flare)
ø22.22 (Brazing)
Models: ARXC72 / ARXC90
1,550
700
ø25 (I.D.) ; ø32 (O.D.)
Cooling : Indoor temperature of 27ÛCDB / 19ÛCWB, and outdoor temperature of 35ÛCDB / 24ÛCWB.
Heating : Indoor temperature of 20ÛCDB / (15ÛCWB), and outdoor temperature of 7ÛCDB / 6ÛCWB.
Pipe length : 7.5 m; Height difference between outdoor unit and indoor unit : 0 m.
1,410
Top view
34
851
1,050
Top view
600
450
Pa
Standard static pressure
295
660
Static pressure range
713 (MAX)
Low
41
123
139
ARXC36GATH : Plastic fan [45dB(A)]
400mm
ARXC72GATH
ARXC90GATH
Front view
Side view
35
INDOOR UNITS
Floor / Ceiling
Models
AB*A12GATH
AB*A14GATH
AB*A18GATH
AB*A24GATH
Double auto swing
Super vane
A combination of up/down and right/left directional swing
allows three-dimensional air direction control.
Double Louvre Super vane with newly developed special
configuration boosts airflow sending cool air quickly to every
corner of the room.
RIGHT and LEFT SWING
The slim and lightweight design allow the unit to be suspended
from the ceiling or installed on the floor.
This type suits many room designs
2
UP and DOWN SWING
3
1
4
1
5
Auto-closing louvre
2
Floor standing
3
When operation is stopped, the louvres will automatically close.
(This function is available on all non-ducted models.)
4
5 steps selectable
4 steps selectable
Compact design
Symmetrical, slim and compact design.
High power DC fan motor
Flexible installation
Example for floor installation
Example for ceiling installation
Floor console
Under ceiling
• High power
• Wide rotation range
• High efficiency
655
990
Specifications
Dimensions
Model name
AB*A12GATH
AB*A14GATH
AB*A18GATH
AB*A24GATH
3.6
4.5
5.6
7.1
4.0
5.0
6.3
8.0
30
42
74
99
660
780
1,000
1,000
Power source
Capacity
kW
W
Input power
High
Med
Sound pressure level
m 3/ h
570
640
720
820
Low
490
550
580
680
High
36
40
46
47
32
36
39
42
28
34
35
37
Med
dB(A)
Low
mm
Dimensions (H x W x D)
kg
Weight
Connection
pipe diameter
(Unit : mm)
(Unit : mm)
Models: AB*A12 / AB*A14 / AB*A18 / AB*A24
230V ~, 50Hz
Cooling
Heating
Airflow rate
199
Liquid (Flare)
Gas (Flare)
mm
199 x 990 x 655
25
26
27
26
ø6.35
ø9.52
ø12.70
ø15.88
Drain
2
1
ø25 (I.D.) ; ø32 (O.D.)
2
1
AB*: ABY(FUJITSU), ABH(GENERAL)
Note : Specifications are based on the following conditions.
Cooling : Indoor temperature of 27ÛCDB / 19ÛCWB, and outdoor temperature of 35ÛCDB / 24ÛCWB.
Heating : Indoor temperature of 20ÛCDB / (15ÛCWB), and outdoor temperature of 7ÛCDB / 6ÛCWB.
Pipe length : 7.5 m; Height difference between outdoor unit and indoor unit : 0 m.
Voltage : 230 [V].
1 Refrigerant piping flare connection (Liquid)
2 Refrigerant piping flare connection (Gas)
3 Drain piping connection
3
36
3
37
INDOOR UNITS
Ceiling
Models
AB*A30GATH
AB*A36GATH
AB*A45GATH
AB*A54GATH
Double auto swing and wide airflow
High lift drain pump
Auto airflow direction and auto swing
Optional drain
pump unit allows
flexible installation
design.
Right and left
Max.
500mm
Easily concealed in any installation
Fresh air intake
5 steps selectable
Up and down
Fresh
air
1
Indoor
2
Outdoor
3
4
High power DC fan motor
4 steps selectable
Installation
Long airflow
Open
Concealed
Long Airflow ensures
comfort to every corner
of a large room.
Wall mounted
(Field Supplied)
General installation pattern
which suspends the indoor
unit from the ceiling.
Installation pattern where part
of the indoor unit is embedded
into the ceiling.
Installation which fixes the indoor unit to the
wall by the use of wall brackets (Field supplied).
This type of installation can be used
when the ceiling space is insufficient.
Specifications
AB*A30GATH
AB*A36GATH
Power source
Capacity
Cooling
kW
W
Input power
High
Med
Sound pressure level
Slim &
Compact design
AB*A54GATH
High Efficiency long-life filter doubles the life of the filter compared
to standard filters.
Optional parts
Hight
Drain Pump Unit : UTR-DPB24T
Flange :
UTD-RF204
240mm
(Unit : mm)
Models: AB*A30 / AB*A36 / AB*A45 / AB*A54
230V ~, 50Hz
Heating
Airflow rate
AB*A45GATH
Long-life filter
low
air-f
nce
ista
d
g
Lon
Dimensions
Model name
m3/ h
9.0
11.2
12.5
14.0
10.0
12.5
14.0
16.0
66
85
131
180
1,630
1,690
2,010
2,270
1,370
1,400
1,600
1,780
Low
1,140
1,170
1,230
1,280
High
42
45
48
51
38
38
42
45
33
34
35
36
Med
dB(A)
Low
mm
Dimensions (H x W x D)
kg
Weight
Connection
pipe diameter
• High power
• Wide rotation range
• High efficiency
Liquid (Flare)
Gas (Flare)
mm
240 x 1,660 x 700
46
48
ø9.52
ø9.52
ø15.88
Drain
AB*: ABY(FUJITSU), ABH(GENERAL)
Note : Specifications are based on the following conditions.
Cooling : Indoor temperature of 27ÛCDB / 19ÛCWB, and outdoor temperature of 35ÛCDB / 24ÛCWB.
Heating : Indoor temperature of 20ÛCDB / (15ÛCWB), and outdoor temperature of 7ÛCDB / 6ÛCWB.
Pipe length : 7.5 m; Height difference between outdoor unit and indoor unit : 0 m.
Voltage : 230 [V].
ø19.05
ø25 (I.D.) ; ø32 (O.D.)
1 Refrigerant piping flare connection (Liquid)
2 Refrigerant piping flare connection (Gas)
3
3 Drain piping connection
2
38
1
3
39
INDOOR UNITS
Wall Mounted
Models (EEV internal model)
Models (EEV external model)
AS*A07GACH
AS*A09GACH
AS*A12GACH
AS*A14GACH
AS*E07GACH
AS*E09GACH
AS*E12GACH
AS*E14GACH
Compact size
Width
790mm
Powerful output even compact design
Though the indoor unit is compact, it features a large, high
pressure cross fan (90mm diameter) in a centre mounted
configuration and a Lambda type heat exchanger to provide plenty
of power.
Auto swing louvre
The Auto Swing Louvre function
ensures that the air direction
corresponds to the mode selected.
1
Compact and Stylish design indoor
2
ing
Sw
3
4
Step
Swing
790mm
Clean filters
Deodorizing effect
High quality air conditioning by incorporation of high performance
filter.
(Odor reduction rate)
Trimethylamine
Ammonia
Ion Deodorization Filter
(ppm)
(ppm)
160
160
With no filter
120
New filter
80
80
The filter deodorizes by powerfully decomposing absorbed odors
using the oxidizing and reducing effects of ions generated by the
ultra-fine-particle ceramic.
With no filter
120
New filter
40
40
New style high power DC fan motor
Easy maintenance
• High power
• Wide rotation range
• High efficiency
• Compact size
Easy maintenance
has been realized as
the front panel can
removed for easy access.
0
0
30
0
60
120 (min)
Open panel
0
30
60
120 (min)
Hydrogen sulfate
(ppm)
160
With no filter
120
Apple-catechin Filter
80
New filter
Testing organization :
Environmental Sanitary Inspection Center
Test method :
Deodorization Test
40
Apple-catechin filter uses static electricity to clean fine particles
and dust in the air.
0
0
30
60
120 (min)
Specifications
AS*A07GACH AS*A09GACH AS*A12GACH AS*A14GACH AS*E07GACH AS*E09GACH AS*E12GACH AS*E14GACH
Power source
230V ~, 50Hz
Sound pressure
level
High
Med
dB(A)
Low
Dimensions (H x W x D)
Weight
Connection
pipe diameter
3.6
4.5
2.8
3.2
4.1
5.0
2.8
3.2
4.1
5.0
17
18
22
34
15
16
21
34
490
500
560
670
490
500
560
680
450
450
480
490
450
450
480
490
370/420*1
370/420*1
420
420
370/420*1
370/420*1
420
420
35
36
39
44
34
35
38
43
33
33
35
37
32
32
34
35
27/31*1
27/31*1
31
32
26/30*1
26/30*1
30
30
790
mm
275 x 790 x 215
275 x 790 x 215
kg
9
9
Liquid (Flare)
Gas (Flare)
mm
Drain
EV Kit (option)
AS*: ASY(FUJITSU), ASH(GENERAL)
Note : Specifications are based on the following conditions.
40
ø6.35
ø6.35
ø12.70
ø12.70
ø13.8(I.D.) ; ø15.8-ø16.7(O.D.)
-
215
470
3
530
660
1
EV kit (UTR-EV09XB/ UTR-EV14XB ) Optional parts:
2
ø13.8(I.D.) ; ø15.8-ø16.7(O.D.)
UTR-EV09XB
416
222
UTR-EV14XB
Cooling : Indoor temperature of 27ÛCDB / 19ÛCWB, and outdoor temperature of 35ÛCDB / 24ÛCWB.
Heating : Indoor temperature of 20ÛCDB / (15ÛCWB), and outdoor temperature of 7ÛCDB / 6ÛCWB.
Pipe length : 7.5 m; Height difference between outdoor unit and indoor unit : 0 m.
Voltage : 230 [V].
*1 : This value is under cooling operation.
1 Refrigerant pipe flare connection (Liquid)
2 Refrigerant pipe flare connection (Gas)
3 Drain piping connection
OUTDOOR UNIT
SIDE
32
UPWARD
19
wire
Install the unit as confiremed direction .
Install the unit where it will not be tilted
by more than 5°
Horizontal installation
INDOOR UNIT
SIDE
65
97
121
Low
2.8
65
m 3/h
2.2
wire
Med
4.5
Vertical installation
High
3.6
UPWARD
W
Input power
2.8
Models: AS*A07 / AS*A09 / AS*A12 / AS*A14
AS*E07 / AS*E09 / AS*E12 / AS*E14
Install the unit as confirmed direction.
Install the unit where it will not be tilted
by more than 5°
kW
230V ~, 50Hz
2.2
(Unit : mm)
275
Cooling
Heating
Airflow rate
Symmetrical, clean design that suits all interiors.
Dimensions
Model name
Capacity
Symmetrical design
41
INDOOR UNITS
Wall Mounted
Models
“Vertical airflow”
provides powerful floor level heating
AS*A18GACH
AS*A24GACH
AS*A30GACH
Air conditioner filter features
5
(24/30)
Ion Deodorization Filter
2.5
Simple & Elegant Appearance Design
Organic coating fin used
heat exchanger
0
3
6
9
12(m)
(ÛC)
46
o
Outside air conditions: 2 ÛC 60%
Operation contents: Heating,
Set temperature (Max set temp) 30 ÛC,
33
airflow Hi, Air direction downward and front
32
31
30
29
Apple-catechin
Filter
Air Filter
Power diffuser (full open)
“Horizontal airflow” does not blow cool air
directly at the occupants in the room
5
High quality air conditioning by incorporation of high performance filter.
(24/30)
Compact & Slim design
Ion Deodorization Filter
2.5
By using DC fan motor, compact design is realized.
New model
0
Previous model
Power diffuser
3
6
9
The filter deodorizes by powerfully decomposing absorbed odors
using the oxidizing and reducing effects of ions generated by the
ultra-fine-particle ceramic.
12(m)
(ÛC)
Outside air conditions: 35 ÛC 40%
Operation contents: Cooling,
Set temperature (Min set temp) 18 ÛC,
airflow Hi, Air direction downward and front
15
16
17
18
Apple-catechin Filter
Apple-catechin filter uses static electricity to clean fine particles
and dust in the air.
Easy maintenance
998mm
Simplification of drain pan cleaning improves
maintenance-ability.
1120mm
DC fan motor
Specifications
Dimensions
Model name
AS*A18GACH
Power source
Capacity
kW
W
Input power
High
Med
m3/ h
Low
High
Sound pressure level
Med
dB(A)
Low
7.1
8.0
6.3
8.0
9.0
32
60
91
840
1,100
1,240
770
910
980
690
730
770
41
48
52
39
43
45
35
35
35
kg
Weight
Liquid (Flare)
Gas (Flare)
mm
AS*: ASY(FUJITSU), ASH(GENERAL)
Note : Specifications are based on the following conditions.
Cooling : Indoor temperature of 27ÛCDB / 19ÛCWB, and outdoor temperature of 35ÛCDB / 24ÛCWB.
Heating : Indoor temperature of 20ÛCDB / (15ÛCWB), and outdoor temperature of 7ÛCDB / 6ÛCWB.
Pipe length : 7.5 m; Height difference between outdoor unit and indoor unit : 0 m.
Voltage : 230 [V].
42
320
520
320 x 998 x 228
15
ø9.52
Drain
Models: AS*A18 / AS*A24 / AS*A30
998
5.6
mm
Dimensions (H x W x D)
Connection
pipe diameter
AS*A30GACH
230V ~, 50Hz
Cooling
Heating
Airflow rate
AS*A24GACH
(Unit : mm)
590
228
721
ø15.88
ø12 (I.D.) ; ø16 (O.D.)
520
1 Refrigerant piping flare connection (Liquid)
2 Refrigerant piping flare connection (Gas)
3 Drain hose connection
43
CONTROLLER
Control System
Every user's needs are supported by offering a variety of controls, such as individual
control, central control and building management control options.
Building
Management
Air Conditioning
Individual Control
Air Conditioning
Central Control
System Controller
Software
UTY-APGX
UTY-PEGX(Option)
USB Adaptor *2
System
Outdoor unit
Wired Remote Controller
(Touch panel)
UTY-RNR*
Indoor unit
Internet or Public
Telephone Line
(Field supplied)
R*:RY(FUJITSU), RG(GENERAL)
Outdoor unit
Wired Remote Controller
Remote / Monitoring side
UTY-RNK*
Indoor unit
Touch Panel Controller
K*:KY(FUJITSU), KG(GENERAL)
UTY-DTG*
Simple Remote Controller
UTY-RSK*
G*:GY(FUJITSU), GG(GENERAL)
K*:KY(FUJITSU), KG(GENERAL)
Central Remote Controller
UTY-DCG*
General-purpose
Building Control Computer
Signal Amplifier
UTY-RHK*
UTY-VSGXZ1
Without
operation mode
G*:GY(FUJITSU), GG(GENERAL)
Group Remote Controller
Connectable to
various sized BMS/BAS *1
Simple Remote Controller
Network Convertor
K*:KY(FUJITSU), KG(GENERAL)
UTY-VGGXZ1
UTY-CGG*
Wireless Remote Controller
IR Receiver Unit
UTY-LNH*
UTB-YWC
G*:GY(FUJITSU), GG(GENERAL)
BACnet ® Gateway
Software
H*: HY(FUJITSU), HG(GENERAL)
UTY-ABGX
USB Adaptor *2
IR Receiver Unit
UTY-LRH*B1
(Field supplied)
or
Card-key
Network Convertor (BMS / LONWORKS®)
*B:YB(FUJITSU), GB(GENERAL)
External
Switch Controller
UTY-TEKX
UTY-VLGX
For single split
Network Convertor
(Field supplied)
Web Monitoring Tool
Service Tool
Software
The devices above cannot be connected to the S series.
(Except System Controller & BACnet® Gateway)
44
USB Adaptor *2
Internet or
Public Telephone
Line
(Monitoring side)
(Field supplied)
(VRF system side)
Software
SU MO TU WE TH FR SA
7
SU MO TU WE TH FR SA
7
3 6 9 12 15 18 21
3 6 9 12 15 18 21
UTY-ASGX
UTY-AMGX
*1. BMS/BAS: Building Management System / Building
Automation System
*2. USB Adaptor is U10 USB Network Interface of
Echelon® Corporation.
UTY-VGGXZ1
USB Adaptor *2
(Field supplied)
Transmission line (VRF Network)
LONWORKS ® Network
Module link
Ethernet
Remote controller line (2 wires)
Signal line(Single split system)
Remote controller line (3 wires)
Group Remote Controller line
USB cable
45
CONTROLLER
Wiring system
Max. transmission
line length
• Wiring construction of the control system is made of power source wiring, transmission wiring and remote controller wiring.
• Total wiring length (total length of transmission line) can be extended up to 3,600m (by using signal amplifiers).
Comparison table of Controllers
3,600m
Item
System Controller UTY-APGX
Maximum 1,600 indoor units can be controlled.
Air conditioning control
Operation monitoring
Status monitoring system
Electricity charge calculation
Refrigerant system 1
USB Adaptor
NW 1
Internet
or
Public Telephone Line
NW 2
NW 3
NW 4
Model name
(Remote / Monitoring side)
Touch Panel Controller
One Touch Panel Controller can control
up to 400 groups / 400 indoor units.
Refrigerant system 2
Group Remote Controller
Maximum 8 remote controller groups can be controlled
BACnet Gateway
UTY-ABGX
®
IR Receiver Kit
Cassette type indoor unit
can be controlled with
Wireless Remote Controller
USB
Adaptor
Remote Controller line
Maximum 16 units can be controlled
BACnet ®
Network
Convertor
for LONWORKS®
UTY-VLGX
BACnet ® Operator
Workstation (B-OWS)
System without Remote Controller
Together with Touch Panel Controller, it is
possible to build non remote controller system.
Web Monitoring Tool
Trouble free operation at all times
by remote monitoring system.
1
8
100
400
1600
16
96
100
400
1600
Max. controllable groups
-
-
-
-
-
-
16
400
1600
-
-
-
-
-
-
-
-
Display
External Switch Controller
Indoor units can be controlled by combining
with Card-key switch such as hotel room.
Network Convertor
UTY-VGGXZ1
Fan speed setting
Room temp. setting
-
Room temp. set point limitation
Up/down air direction flap setting
Touch Panel
Controller
Timer
Wired
External Switch
Remote Controller
Controller
Remote Controller line
(2 wires)
Central Remote
Controller
Simple
Remote Controller
IR Receiver
unit
Remote Controller line
(3 wires)
USB cable
Indoor unit
(Duct)
Group
Simple
Remote Controller Remote Controller
System
Controller
Wireless
Wired
Remote Controller Remote Controller
(Touch panel)
LONWORKS® Network
Ethernet
Signal line
(single system)
Group Remote
Controller line
-
-
-
-
-
-
-
-
-
-
-
-
RC prohibition
-
-
-
-
-
-
-
Anti freeze setting
-
-
-
-
-
-
-
Setback cool/heat
-
-
-
-
-
-
Economy mode setting
-
-
-
-
-
Failure
-
-
-
-
-
Defrosting
-
-
-
-
-
Current time
-
-
-
-
-
Day of week
-
-
-
-
-
R.C. prohibition
-
-
-
-
-
Cooling/heating priority
-
-
-
-
-
Address display
-
-
-
-
-
Room temp
-
-
-
-
-
-
Multi language
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
On/Off, Temp,
-
-
-
-
-
-
-
-
-
Week
Week
-
-
-
Week
Week
Year
Year
8
4
-
-
-
4
20
20
144
-
-
-
-
-
-
-
-
On/off timer
Sleep timer
-
-
-
-
-
-
-
-
-
Program timer
-
-
-
-
-
-
-
-
-
Auto off timer
-
-
-
-
-
-
-
-
Day off
-
-
-
-
-
10 30
Ɣ
30
-
-
5
10
10
10
10
Status monitoring system
-
-
-
-
-
-
Electricity charge calculation
-
-
-
-
-
-
-
-
Emergency stop
-
-
-
-
-
-
Control via internet
-
-
-
-
-
-
-
-
E-mail notification for malfunction
-
-
-
-
-
-
-
-
-
-
-
-
Child lock
Password
setting
Password
setting
-
Error history
Control
Indoor unit
(Cassette)
-
-
Min. unit of timer setting (Minutes)
Module link
-
-
mode, times per day
Transmission line
-
-
Single system
Service Tool
Extensive monitoring and analysis
functions for installation and maintenance.
-
Group setting
Right/left air direction flap setting
Schedule timer
Big Multi system
-
Test operation
Summer time
USB Adaptor
46
-
Operation mode setting
Backlight
Outdoor
unit
UTY-APGX
1
Period
(Monitoring side)
UTY-DTGG
16
(VRF network system side)
(Monitoring side)
UTY-DTGY
UTY-DCGG
1
Name registration
Service Tool
UTY-ASGX
(Monitoring side)
UTY-DCGY
UTY-CGGG
16
IR Receiver Unit
Duct type indoor unit can be controlled with
Wireless Remote Controller.
Network Convertor
UTY-VGGXZ1
Internet
or
Public Telephone Line
UTY-CGGY
UTY-LNHG
1
USB
Adaptor
Web Monitoring Tool
UTY-AMGX
UTY-LNHY
UTY-RHKG
16
Transmission line
line is non-polar 2-conductor.
Signal Ampli¿er
UTY-VSGX
UTY-RHKY
UTY-RSKG
1
Card key
2 Remote Controllers
Indoor unit can be controlled
from both remote controllers.
UTY-RSKY
UTY-RNKG
Software
16
LONWORKS®
LONWORKS®
Network
UTY-RNKY
UTY-RNRG
System
Controller
Max. controllable indoor units
Air conditioning control function
BACnet
UTY-RNRY
Touch Panel
Controller
On / Off
Network Convertor UTY-VGGXZ1
®
Wired Remote
Controller
Max. controllable remote controller groups
Central Remote Controller
Maximum 100 indoor units can be controlled.
Building Management System
Simple Remote Simple Remote*1 Wireless Remote Group Remote Central Remote
Controller
Controller
Controller
Controller
Controller
Wired Remote
Controller
(Touch panel)
Key lock
Child lock
*1 "Operation mode" setting is not available for this model.
*2 This function is available only through external input. control.
*2
Ɣ : Supported
*2
— : Not supported yet
-
Password
setting
ż : Supported soon
47
CONTROLLER
Wired Remote Controller (Touch Panel)
Max. transmission
controllable
Max.
line length
16
indoor units
UTY-RNR*
Various convenient functions
Setback-Cool / Setback-Heat (Future release)
・Cooling / Heating is automatically started when the room temperature reaches a setting temperature even if the indoor unit is off.
Easy operation by high-definition large
STN-LCD touch panel screen
In summer
• Easy finger touch operation with LCD panel
• Built-in weekly/Daily timer(ON/OFF,Temp.,Mode)
• Backlight enables easy operation in a darkened room
• Room temperature display
• Control up to 16 indoor units
• Corresponds to 7 different languages (English, Chinese, French, German, Spanish, Russian, Polish)
In winter
Setting temp.
Room
temp.
Setting temp.
Setback-Heat
function operation
Setback-Heat
function set
Setback-Cool
function operation
Automatically
start
Automatically
stop
Setback-Cool
function set
Automatically
start
Automatically
stop
Displays setting status and Limitations
• The remote controller settings can be easily checked
Functions
High performance and compact size
Various energy saving control
• In addition to the individual control, various energy saving
controls can be realized using one remote controller only.
Auto OFF Timer
• The indoor unit automatically turns off after a set time has passed.
• The time interval for which auto off works can be set.
Individual
control
Ex) At interval time hour
(17:00 to 24:00)to
prevent forgetting to
turn off
Thermo
sensor
Room
temp.
Weekly
timer
Auto off
timer
Child lock
• Lock / unlock method: Push the
ON/OFF button and the screen
(4 seconds)
Set interval time hour (17:00 to 24:00)
ON
Auto OFF
Summer Time display
• This function can be set easily from
Menu screen
Set off time
(30 to 240 minutes)
OFF
17:00
Accurate and comfortable control
• Indoor temperature can be detected accurately by the inclusion of
a thermo sensor in the body of the wired controller.
24:00
Name Registration
• Indoor unit names can be registered in
the remote controller screen.
This makes it easy to identify the
indoor unit you want to control in the
room.
2 schedules Weekly Timer
• 2 schedules such as for the summer and winter can be set.
• 8 setting changeable per day of week (Setting items: On/Off,
Temperature, Mode, Time)
Ex)
Simplified installation
Schedule 1 (Summer schedule)
Setting temp.
26°C
ON
OFF
Uses non-polar 2-wire type
• The faulty wiring can be
prevented by using
non-polar 2-wire.
Schedule 2 (Winter schedule)
Setting temp.
OFF
25°C
24°C
OFF
ON
OFF
I.U.
I.U.
Y1Y2 Y3
non-polar
2-wire
23°C
OK
8:40
11:40
17:30
20:40
Time
8:40 10:00
15:30 17:30
20:40
Address ĺ
Y1
23°C
Backlight
• Backlight enable easy operation in a
darkened room.
• For the lighting time of Backlight, 30
or 60 seconds can be set.
• Backlight activates while the buttons
are operated and goes off 30 or 60
seconds after the operation stops.
Settable time range
10 to 120 minutes
Settable time range
10 to 120 minutes
02
01
Time
11:40
13:40
Time
Error History Display
• The errors that occur in the indoor unit or
remote controller are saved as a history.
• A maximum of 32 error incidents can be saved.
Set Temperature Upper and Lower Limit Setting
• The set temperature range can be set for each operation mode.
(Cooling / Heating / Auto)
During Cooling
30°C
During Heating
Specifications
30°C
UTY-RNR*
Model name
25°C
25°C
DC 12V
Power Supply
Dimensions (H x W x D) (mm)
18°C
120 x 120 x 20.4
10°C
Original temp.
setting range
Lower limit
setting
Original temp.
setting range
Upper limit
setting
220
Weight (g)
DC12V is supplied by the indoor unit.
48
03
Easy Maintenance
25°C
13:40
04
Y2
05
22°C
11:40
Y1
The appropriate indoor unit
performs the air blow and
LED lamps blink.
Setting temp. Set temperature change Auto return
24°C
Room temperature
display
Y2
Heating operation
Setting temp. Set temperature change Auto return
Room temperature sensor
OK
Auto Address Setting/Setting Position Notification
• Reduce errors and install time compared with the current specification Rotary SW
• When will be set remote controller groups, can also be set
automatically new Wired remote controller address
• After auto address setting of new wired remote controller groups,
what number can also confirm addresses
Time
Set Temperature Auto Return
• The setting temperature automatically returns to the previous
setting temperature.
• The time range in which the set temperature can be changed is
10 to 120 minutes.
Cooling operation
Y1Y2 Y3
R* : RY(FUJITSU), RG(GENERAL)
49
CONTROLLER
Wired Remote Controller
Max. controllable
16
indoor units
UTY-RNK*
Simple Remote Controller
Max. controllable
16
indoor units
UTY-RSK*
UTY-RHK* (Without Operation mode)
The room temperature can be controlled by detecting
the temperature accurately from the built-in sensor
Compact remote controller provides access to
basic functions
• Simple operation with Built-in Weekly / Daily Timer.
• Control up to 16 indoor units.
• Up to 2 wired remote controllers can be connected to a single indoor unit.
• Up to 16 indoor units can be controlled with one remote controller.
• Suitable for hotels or offices as it is easily operated with no complex
functions.
UTY-RSK*
Functions
Functions
Powerful features and compact size
Built-in timers
This Wired Remote Controller incorporates four primary functions
into a single unit.
Weekly timer : Possible to set ON/OFF time to
operate twice each day of the week.
Individual
control
Thermo
sensor
UTY-RHK*
Without Operation mode
Weekly
timer
Easy-to-understand time bar display
Setup screen example
Set to Wednesday: 8:00 to 20:00.
Setback
timer
0
3
6
9
12
24°C
15
18
Screen after setup
21 Time
User-friendly operation
Backlight
• Provides access to basic operations, such as Start / Stop, Fan
control, Operation mode switching, and Room temperature
setting.
• A large On / Off button is provided in the centre of the remote
controller for easy operation.
• Can be used jointly with other individual control unit.
• Following an error display, diagnostics can be carried out on the
controller.
• Backlight enables easy operation in a
darkened room.
• Backlight activates during all button
operations, and lasts 10 seconds in
Operation mode and 5 seconds in stop
mode after a button is pressed.
Simple installation
Functions summary
Setback timer : Possible to set temperature for two times spans
and for each day of the week.
Accurate and comfortable
Setup screen example
Set from Sunday to Saturday:
12:00 to 15:00, 28°C.
Sensor part
Indoor temperature can be
detected accurately by the
inclusion of a thermo
sensor in the body of the
wired controller.
This new wired remote
controller and the optional
remote sensor allows
flexibility in sensor
location, suitable for all
requirements.
Thermo sensor
display
Control part for
changing the
thermo sensor
0
3
6
9
28°C
15 18
12
Can be mounted on the European Mounting Box (Installation
dimension: 60mm) or the JIS Built-in Box (Installation dimension:
83.5mm).
21 Time
60mm
At "Weekly timer" + "Set back timer" setup
28°C
24°C
3
6
9
12
15
18
21
28°C
Operation
24°C
Time
Diagnosis check function
Example of changing sensor
Indoor unit
Day
UTY-RHK*
European switch box
Fan control
*1
Operation mode
Room temp. setting
JIS built-in box
*1: "Operation mode" setting is not available.
It is recommend to use together with other type controller.
Two methods are available for determining the cause of failure in
the event of a malfunction occurs:
Remote Sensor
in the bedroom
UTY-RSK*
On / Off
83.5mm
0
24°C
Model
• Malfunction diagnosis function
• Error history (Last 16 error codes can be accessed)
Night
Wired remote
controller
Remote
sensor
The detecting point
can be easily changed
Wired Remote Controller
in the living room
Simple installation
Components are compatible with
standard switch boxes.
Flat back surface allows to be
installed wherever it is needed.
European mounting box
JIS built-in box
Displayed temperature is set temperature.
Specifications
Model name
Power Supply
Dimensions (H x W x D) (mm)
Weight (g)
DC12V is supplied by the indoor unit. K* : KY(FUJITSU), KG(GENERAL)
50
Specifications
UTY-RNK*
DC 12V
120 x 120 x 18
160
Model name
UTY-RSK*
DC 12V
Power Supply
Dimensions (H x W x D) (mm)
120 x 75 x 14
90
Weight (g)
DC12V is supplied by the indoor unit.
UTY-RHK*
K* : KY(FUJITSU), KG(GENERAL)
51
CONTROLLER
Wireless Remote Controller
Max. controllable
16
indoor units
UTY-LNH*
IR Receiver Unit
UTB-YWC
Selectable
4
Simple and sophisticated operations
with a choice of 4 daily timers
daily timers
Necessary to control for all duct type by
Wireless Remote Controller
• A single controller controls up to 16 indoor units.
Functions
Wiring connection
Built-in daily timer
Easy installation and operation
Select from 4 different timer programs :
On / Off / Program / Sleep
Program timer : The program timer operates the ON and OFF
timer once within a 24 hour period.
Sleep timer : The sleep timer function automatically corrects the
set temperature according to the time setting to prevent excessive
cooling or heating during sleep hours.
Code selector switch
prevents indoor unit
mix-up. (Up to 4
codes can be set.)
Duct Type Indoor Unit
IR Receiver Unit
Wireless
Remote Controller
Specifications
Wide and precise
Cooling operation/dry operation
Model name
When the sleep timer is set, the set temperature automatically rises
1ÛC every hour. The set temperature can rise up to a maximum of 2ÛC.
Battery
Dimensions (H x W x D) (mm)
T imer setting
Weight (g)
UTB-YWC
DC 12V
145 x 90 x 30
150
60min.
2ÛC
1ÛC
Address setting
During installation work, address setting can be performed using
the Wireless Remote Controller, thus eliminating manual switch
setting.
Heating operation
When the sleep timer is set, the set temperature automatically drops
1ÛC every 30 minutes. The set temperature can drop to a max. of 4ÛC.
1ÛC
2ÛC
Transmission line
Outdoor unit
3ÛC
Indoor unit
4ÛC
IR Receiver Unit
UTY-LRH*B1
Cassette type indoor unit can be controlled
with Wireless Remote Controller
Wireless
Remote Controller
30min.
60min.
90min.
Timer setting
Wireless
Remote Controller
Specifications
Specifications
Model name
Battery
Dimensions (H x W x D) (mm)
Weight (g)
H* : HY(FUJITSU), HG(GENERAL)
52
UTY-LNH*
1.5V (R03 / LR03 / AAA) x 2
170 x 56 x 19
85
Model name
Battery
Dimensions (H x W x D) (mm)
Weight (g)
UTY-LRH*B1
DC 12V
193.9 x 193.9 x 31.2
140
H* : YB(FUJITSU), GB(GENERAL)
53
CONTROLLER
Group Remote Controller
Max. controllable
UTY-CGG*
remote controller
groups
8
Useful functions
Max. connectable
Group control of indoor units with
simple operation
64
• Up to 8 remote controller groups can be controlled by one Group Remote Controller.
• Up to 64 Group Remote Controllers can be connected in one VRF network system.
• Network Convertor (UTY-VGGXZ1) is required to connect Group Remote Controllers
to a VRF network system.
(Network Convertor allows up to 4 Group Remote Controllers)
Indoor Unit Operation Indicators
1 Timer setting at all the
group R.C. in
a VRF network
system
connected indoor units is
possible by centralized timer
on the front panel.
Timer setting at all the connected indoor units
is possible by centralized timer on
the front panel.
With cover closed
: On
: Timer operation
2 All the connected indoor
Press the ALL TIMER button to turn the timer
operation on or off for all indoor units.
units can be turned on / off
simultaneously by centralized
ON/OFF button on the front of
the cover.
Functions
3 The indoor unit can be quickly
Central
control
ON/OFF
control
Weekly
timer
Control up to 8 remote controller groups
Single Group Remote Controller controls and monitors up to 8
remote controller groups.
Operation Lamp
turned on and off by ON / OFF
button of each indoor unit on
the front of the door.
High performance and compact size
ON / OFF, Operating mode, Room temperature and Fan speed
setting can be controlled / monitored centrally or individually.
: Off
: Selection
ALL TIMER Button
This is on if any of the indoor units is operating.
This Àashes if any of the indoor units has
malfunction(s).
Indoor Unit Name Labels
ALL OFF Button
Write the names of the indoor units on the
included labels and attach them.
Press the ALL OFF button to turn off all of the
indoor units.
ON / OFF Button
ALL ON Button
Press the ON / OFF button to turn the
corresponding indoor unit on or off.
Press the ALL ON button to turn on all of the
indoor units.
Refrigerant
system 2
Refrigerant
system 1
Timer and Clock
Display and setting
With cover open
Displaying the Status
and Controlling indoor units
Setting Display
Transmission Display
Operation Lock Display
Day Display
Hotel
Guest room
ON / OFF Display
Timer and Clock Display
Fan Speed Display
Timer Mode Display
Office room
Office & Lounge
Set Temperature Display
Lounge
Operation Mode Display
Timer Mode (DELETE) Button
ON / OFF Button
DAY Button
Restaurant
Select Button
Restaurant
Network
Convertor
Fan Control Button
Set Time Button
Master Control Button*1, *2, *3
PROGRAM (CLOCK ADJUST) Button
Set Temperature Button
Lobby
Lobby
ENTER Button
1
Child Lock Function
Group Remote Controller 1
To control office room, lounge, restaurant and lobby (8 remote controller groups)
2
Group
Remote Controller
Group Remote Controller 2
To control guest room and lounge (7 remote controller groups)
" is not available for a heat pump model unless it is set up for the master indoor unit.
* 1 : "AUTO
* 2 : "FAN " is not available for a heat pump model
Built-in weekly timers
* 3 : "HEAT
" is not available for a cooling only model
The weekly timer is provided as a standard function.
1. The timer can be set up for up to 4 times per day. (On / Off, operating mode, set temperature)
2. Allows separate settings for each day of the week.
Time
Air conditioning ON/OFF
setting corresponding to air
conditioning specification
needs is possible.
Temperature switching
(Peak power cut)
(Anti-freeze)
Time
Switching between the cooling
mode and heating mode can
be set by time.
Ope.
Time
Since peak power cut is performed
in a planned way, setting which
changes the room temperature
linked with time is possible.
Stop setting
Specifications
Ope.
Temperature switching
Ope.
Ope.
Cooling / Heating switching
Ope.
ON / OFF switching
Low temperature heating
operation can be set to prevent
freezing in cold regions at
night, etc.
Time
Indoor unit stop setting at
operation end time is possible.
Power Supply
DC 12V
Dimensions (H x W x D) (mm)
120 x 120 x 18
200
Weight (g)
DC12V is supplied by a network converter.
54
UTY-CGG*
Model name
Time
G* : GY(FUJITSU), GG(GENERAL)
55
CONTROLLER
Central Remote Controller
Max. controllable
100
Indoor units
UTY-DCG*
Functions
Max. controllable
Central control of small- and medium-sized buildings and
tenants. The operation status of all connected indoor units
can be viewed at a glance on a large LCD monitor to simplify
individual control to batched control.
16
groups
• Individual control and monitor of 100 indoor units
• 5 inch TFT color screen
• User friendly view and easy operation
• External input / output contact
• Detachable power supply unit
• Corresponds to 7 different languages (English, Chinese, French, German, Spanish, Russian, Polish)
Diverse control of indoor units
• Individual control (On / Off,
Mode, set Temp, Fan speed,
Economy operation,
Antifreeze operation)
• Weekly timer : Weekly timer can set the timer by various
combinations.
Set temp.
Weekend
26°C
26°C
26°C
28°C
28°C
28°C
Holiday
8:00
User friendly operation
Operation status monitor displays for all indoor units
Easy comprehensible display and operation button
28°C
26°C
Weekday
• Remote controller
prohibition (All, On / Off,
R.C prohibition setting
prohibits individual remote
control operation from this
controller
Function menu displays the items to select.
• Room temperature set point
upper and lower limitation
Registration indoor unit
18:00
21:00
Time
• Automatic clock adjustment :
The time setting of
each controller can be
set in batch
automatically.
Mode, Temp, Timer, Filter) :
Function Menu
12:00 13:00
Error history
• Max 200 Errors memorize.
• Suitable maintenance is possible by
analysis of the error history data.
Function button
1 to 1 function button
supports easy setting.
Operation guidance
Easy Installation
• The control panel and power supply unit can be installed
separately.
• For flexibility in installation, the Control panel can be built into the
wall or fix on the wall.
Setting pattern 1
Ceiling
Power supply unit
Wall
Group : 3F
Wall
Indoor unit registration
finish
Group : Division C
Specifications
Group : Tenant B
Group : Tenant C
UTY-DCG*
Model name
Power Supply
Dimensions (H x W x D) (mm)
Weight (g)
Emergency stop function
Control panel
Control panel + Power supply unit
Group : Division B
Group : 2F
Group : Tenant A
Indoor unit registration
start
SW BOX
Group :
Hallway
Group : Division A
Indoor unit registration
Setting pattern 2
System overview
• It allows multiple indoor units grouping (Max.16 groups controlled)
• Interlock with external device
• Automatic or manual indoor unit registration
Control Panel
Power Supply Unit
DC 5 V
100-240V, 50-60Hz, Single phase
120 x 162 x 25.7
99 x 135 x 39.2
308
355
<PACKING LIST>
Packing List
Control Panel / Power Supply Unit / Connecting cable, etc.
G* : GY(FUJITSU), GG(GENERAL)
56
57
CONTROLLER
Touch Panel Controller
Max. controllable
400
Indoor units
UTY-DTG*
Up to 400 indoor units can be controlled
High visibility and easy operation via high resolution
7.5 inch TFT-LCD touch panel screen
Group A
• Large-sized 7.5-inch TFT color
• LCD Easy finger touch operation
• Stylish shape and design to suit all application
• No additional component is required for installation
• Up to 400 indoor units can be controlled
• Selectable 2 display types (Icon / List) in monitoring mode
• Corresponds to 7 different languages, English, Chinese, French, German, Spanish, Russian, Polish.
Group B
It allows multiple indoor unit grouping
Emergency stop control
Air conditioner can be turned
off through the external input control
Emergency stop function
Functions
Function
Versatility
• Up to 400 indoor units can be controlled
• It allows multiple indoor units grouping
• Schedule timer function is standard (20 patterns per day)
• Emergency stop function(through the external input control)
• Temperature upper and lower limit setting
• The clock of each indoor unit correct setting
CSV format data edited by PC can be imported to
Touch Panel Controller.
Individual control
Flexible grouping
Data transfer available
by USB
Easy installation
Touch Panel Controller is easily mounted to the wall Flat back
surface allows to be installed wherever it is needed.
• Correctable mechanism for tilting (horizontal)
after the installation of the body
No additional component is required for installation
• There is no need for the installation space of power supply adaptor and
transmission adaptor etc.
Schedule control
Indoor units operation monitoring
Automatic clock adjustment
The time setting of each
controller can be set in
batch automatically.
Real size screen image
Easy operation
Easy maintenance
• Large and wide-angled LCD is easily viewable even at a distance
• Easy-to-understand icon-driven Graphical User Interface (GUI)
• Wide range of simple-to-understand icons
• Flat touch screen is easily cleaned
• Non-glare coating on touch panel controller minimizes fingerprint
marking
• Easy-to-remove front cover
Specifications
• Operation can be selected using your finger or the dedicated
touch pen by pressing the appropriate on-screen icon
• Up-to-date status display
• Background color identifies current control operation Blue for
monitoring, green for operational control
Model name
Power Supply
Dimensions (H x W x D) (mm)
Weight (g)
Interface
UTY-DTG*
100-240V 50/60Hz, Single phase
260 x 246 x 54
2,150
USB 2.0
G* : GY(FUJITSU), GG(GENERAL)
58
59
CONTROLLER
System Controller
Max. controllable
Software
4
VRF network
systems
UTY-APGX
Energy saving management
With UTY-PEGX
Option
Max. controllable
Outdoor units
• Up to a maximum of 4 VRF network systems, 1600 indoor units, and 400 outdoor units
can be controlled.
• Supports VRF S series, V series and V-ll series.
• In addition to air conditioning precision control function, central remote control,
electricity charge calculation, schedule management, and energy saving functions are
strengthened and building manager and owner needs are met.
Max. controllable
1,600
Indoor units
Functions
User friendly view and operation
• Click & Operate : The property is shown visually from the
perspective most suitable for operation and operated accordingly
(Click & Operate). You can select from among the 4 displays of
site, building, floor, or list.
Click & Operate the whole building !
• Freely define groups for batched control : Indoor units can be
freely grouped for simple batched control from a tree menu.
Grouping by hierarchal structure, such as by section, division or
department is possible.
Properties can be shown using one of the four
displays of site, building, floor, or list.
Click & Operate any specified unit(s)!
Peak cut operation
Outdoor unit capacity save
Option
Option
A power meter is connected to detect the total power consumption
while shifting the indoor unit set temperature, set the indoor unit
forced thermostat off, and taking other measures to carefully
control the power
Outdoor unit
Forced thermostat
Target power
consumed while
stop range
off range
consumption
maintaining comfort and
conducting control to
maintain the target
power consumption set
for each time.
The indoor units to be
controlled can be freely
grouped and the control
Shows change in power
Ideal control line (Use of
level can be set.
consumption by time
average power consumption)
Outdoor unit capacity save switches the outdoor unit capability
upper limit to suppress power consumption during hot summers
and cold winters by averaging the power saving effect of each
refrigerant system. You can select from 50% or more of the
capacity upper limit.
Indoor unit rotation operation
Batched stop
Option
The operation of indoor units can be automatically rotated within a
group in accordance with the set annual schedule to reduce power
consumption while maintaining comfort. The indoor unit operation
stoppage rate can be selected.
Outdoor unit
capacity
upper limit
Power consumption
400
System Controller realizes the advanced integrated monitoring & control of
VRF network system from small scale buildings to large scale buildings.
Time
Outdoor unit capacity control screen
Batched stop at a freely set time for a property, building, or freely
set block unit can be done to prevent any air conditioning unit from
being forgotten to be turned off at the end of office hours, etc. In
addition, any air conditioning unit whose operation is left on can be
immediately identified by the icon color for a building or indoor unit
in the monitoring screen and batched stop conducted in response.
The display is easily changed by pressing the button.
Batched stop
Forget to turn off
Entire building stopped
Indoor unit rotation screen
Site view
List view
Electricity charge apportionment
Electricity charge apportionment calculation framework
Suppose you want to find the power consumed by the air
conditioners of each tenant from the electricity charge for each
month. With electricity charge apportionment function, used energy
apportionment ratio will be provided, calculating in detail the energy
consumed by the units used by each tenant. This information is then
used to calculate the charges for the electricity consumed for air
conditioning by each tenant from the total electricity charges in the
bill from the electric power company. (See figure at right)
The detailed calculation takes into consideration such things as
unused rooms and nighttime electricity charges and shows them in
a charges calculation sheet.
Batched control of freely
defined groups
Energy used by
each unit is calculated
Energy apportioned by
the outdoor unit to each
indoor unit is calculated
Tenant A
Tenant A
Tenant B
Tenant C
Tenant B
Tenant C
System Configuration Example
Building view
Electric power
company
Batched control of freely selected units
Electricity charges (air conditioning)
Signal transmission line
Electricity charges by
tenant are calculated
System Controller
P r
Powe
Pow
distribu
ibu
butio
tion
boardd
Outdoor
unit
Click & Operate the whole floor !
The floor layout drawing
can be imported to easily
make the settings for the
actual building.
Tenant A-1
Tenant A-2
Tenant A-3
Tenant A-4
Tenant A-5
Tenant A-6
P r
Powe
Pow
distribu
ibu
butio
tion
boardd
The distribution ratio for energy used by
each indoor unit is calculated and the
electricity charges for the energy used
by each indoor unit are calculated from
the total electricity charges.
The energy used by each
indoor unit and the energy
apportioned by the outdoor
unit are added together to
calculate the total amount of
energy used.
Indoor unit energy used
Tenant B-1
Tenant B-2
Tenant B-3
Tenant A
Tenant B
Tenant C
Electric
Bill
Electric
Bill
Electric
Bill
Apportioned energy
Indoor unit
total energy used
3Ø, 4 wire 400V, 50Hz
Tenant C-1
Tenant C-2
Tenant C-3
1Ø, 2wire 230V, 50Hz
Floor view
Click & Operate the unit !
60
61
CONTROLLER
Remote centralized control
System Controller may be used on site or remotely over various
networks for remote central control. System Controller requires
2 softwares working together. VRF Controller runs on site and
communicate with VRF system. VRF Explorer runs remotely and
provides user interface and communicate with the VRF Controller.
VRF Controller and VRF Explorer program may run in a single PC
or in different PCs separated by network. By using VRF Explorer
software, one PC can perform central control of 10 VRF system
sites with max. 20 buildings per site.
Remote central control
1 VRF Explorer can control or monitor up to 10 sites.
VRF Explorer
Building management company,
management center, etc.
VRF Controller
A maximum of
10 locations, such as
offices or factories
Schedule control
Error display & E-mail notification
• Annual schedules can be set for each remote controller group /
user defined group.
• Start / stop, operating mode, remote controller prohibition, and
temperature settings can be set up to 144 times per day at 10
minute intervals for up to 101 configurations for each remote
controller group.
• Settings can be made for periods straddling midnight.
• Allows programming of special settings for holidays, including
public holidays, for a complete year.
• Low noise operation of outdoor unit can be scheduled.
Error is notified with popup
message, audible sound
and E-mail real time when
error occurs. Error for the
past 1 year are logged and
can be reviewed later.
VRF Controller
On site central control
Internet
or
Telephone Line
or
LAN
Max. 4 VRF network systems per site
Operating & control record
Displays the history of
operation status and control.
Internet
or
Telephone Line
or
LAN
1 VRF Controller can be monitored from any number
of VRF Explorers (Up to 5 connections simultaneously).
VRF Explorer
Central Monitoring Screen
for all Properties
VRF Explorer Building Management Company A
(In charge of the day shift)
VRF Explorer
VRF Explorer
Building
Management Company B
(In charge of the night shift)
Internet
or
Telephone Line
or
LAN
Office Management Center
VRF Explorer
VRF Controller
Diverse control of indoor units
• Indoor unit operation state, operation
mode, etc. are displayed
• Indoor unit start / stop and operation mode
switching
• Temperature setting, Remote Controller
prohibition.
VRF Explorer
Prohibition Setting
This prohibits changes to the operation mode, temperature, start / stop, etc.
Multiple language display
Corresponds to 7 different languages (English, Chinese,
French, German, Spanish, Russian, Polish)
Security Company
Headquarters Management Center
The following chart shows the detail requirement for an AT compatible personal computer to run System Controller.
Applies for both VRF Controller and VRF Explorer PC.
Special Property Detailed Monitoring Screen
Can be used for a variety of applications
• Microsoft ® Windows ® XP SP3 (32-bit) Professional (*1)
• Microsoft ® Windows ® Vista ® SP2 (32-bit) Home Premium, Business (*2)
• Microsoft ® Windows ® 7 SP1 (32/64-bit) Home Premium, Professional (*2)
[Supported languages]
(*1) English only
(*2) English, Chinese, French, German, Russian, Spanish, and Polish
Operating system
Air conditioning management for
large shopping malls or the outlets of
nationwide franchises
Air conditioning management of
multiple buildings spread over a large site
Provides high-quality building
air conditioning service
• Remote centralized management can be used for nighttime
only to manage the air conditioning of multiple stores,
operate air conditioning for people working overtime, and
checking to see if employees forgot to turn off the air
conditioning after they leave.
• Batched operation of the factory buildings on a large site can
be remotely conducted from the management office of the
administration building to employ power saving operation.
• Service companies that manage buildings that are empty
at night after the managers leave to go home can conduct
centralized remote monitoring of the building without
dispatching employees to the site, which allows them to
monitor the air conditioning for multiple clients.
CPU
Intel® CoreTM i3 2GHz or higher
Memory
2GB or more (Windows® XP, Vista®, 7 32-bit), 4GB or more (Windows® 7 64-bit)
HDD
40GB or more of free space
• The System Controller remote monitoring and control
functions can be used to receive outsourcing business
from small and medium size building owners to manage
their air conditioning energy.
Display
1024 x 768 or higher resolution
• Nighttime only remote
monitoring of multiple properties
after the people leave can be
performed for areas that require
24-hour operation, such as
server rooms, to monitor for
Service Companies
problems.
Interface
USB port is required for each of the followings for Server PC ;
• Wibu Key (Software protection key)
• Echelon® U10 USB Network Interface (Required for each VRF Network)
Ethernet port is required for remote connection using internet.
Accelerator
Requires the internal graphics accelerator be compatible with Microsoft® DirectX® 9.0
Software required
Adobe ® Reader® 9.0 or later
Hardware required
DVD-ROM Drive
• Multiple users via a LAN can control the air conditioning in
the office, general affairs department, or janitor’s room.
• The air conditioning for franchise locations nationwide can
be centrally controlled from headquarters to facilitate
operation status and control to save energy.
Commercial buildings
Franchises
Security Support
• The headquarters can conduct centralized remote monitoring
of the company’s factories in outlying areas to improve the
power saving effect for the entire company.
• Controlling the operation of each building and each classroom
on campus makes it possible to reduce expenses by remotely
controlling those spaces in accordance with the teaching
schedule.
Factories
Universities
Hospitals
<OPTION AVAILABLE>
Employs SSL Encryption Technology
Encryption technology is used for communications to
remote sites to prevent information from being stolen.
Encryption
62
PERSONAL COMPUTER SPECIFICATIONS
Detailed User Management
User identification : Authorization using
user IDs and passwords is employed to
prevent unauthorized access.
Access authority : The functions that can
be used are restricted for individual login
users to prevent unauthorized use.
Energy Saving Software UTY-PEGX(*1)
Additional support for energy saving function and Electricity Charge Apportionment using electricity meter.
<PACKING LIST>
Name and shape
Quantity
Application
DVD-ROM
1
Includes the software and manuals for System Controller. Both VRF Controller and VRF Explorer software are included.
Wibu Key
1
Software protection key to be inserted in a USB slot running System Controller. System Controller may only run on a PC with Wibu Key.
However, Wibu key is not required for remote VRF Explorer software.
(Software protection key)
Personal computer must be field supplied. U10 USB Network Interface must be field supplied. Contact Echelon® Corporation or its local sales representative for detail.
Product Name : U10 USB Network Interface - TP/FT-10 Channel Model Number : 75010R
*1: Energy Saving Software (UTY-PEGX) is available for the indoor units and the outdoor units after revision code B or later.
Microsoft® Windows® 8 will be supported.(Future release)
63
CONVERTOR & ADAPTOR
Network Convertor
Max. connectable
16
single indoor units
UTY-VGGXZ1
Network Convertor for LONWORKS
Max. controllable
®
4
Units to BMS
UTY-VLGX
Max. connectable
Max. controllable
4
Group Remote
100
Outdoor units
Controllers
• This Network Convertor is to be used for connecting single split system or Group
Remote Controller (UTY-CGGY / UTY-CGGG) with the VRF network system.
• Please select the function by switching the dip switch during the installation.
• For connection between VRF network system and a LONWORKS® open network for
management of small to medium-sized BMS and VRF network system.
• The UTY-VLGX permits central monitoring and control of a VRF network system
from a BMS through a LONWORKS® interface.
• Up to 128 Indoor units can be connected to one Network Convertor for LONWORKS®
Functions
Installation example
Max. controllable
128
Indoor units
Max. 100 outdoor units
Used for connecting single split system
• Split type systems can be centrally controlled from Touch Panel
Controller or System Controller through connection to the VRF's
network convertor.
• On / Off Control, Master control, Room temperature and Fan
speed setting via the Network Convertor are available.
• One Network Convertor can be used to connect and control up to
16 single units.
Max. 128 indoor units
Used for connecting
Group Remote Controller
4 Group Remote Controllers can be connected to a single Network
Convertor (UTY-VGGXZ1).
Group
Remote Controller
UTY-CGGY
UTY-CGGG
Network Convertor
Max. 4 Network
Convertor
General-purpose
building control computer
(LONWORKS® device)
VRF network system 1
Lighting facilities
Max. 100 outdoor units
Group of Single Split
VRF network system
Network Convertor
VRF network system
Single Split
USB
Adaptor
System Controller
Big Multi
* 2 refrigerant circuits can be covered by a single Network Convertor (UTY-VGGXZ1) .
Up to a total of 16 Network Convertors (UTY-VGGXZ1) and System Controller
adaptors can be connected in a single VRF network system.
Automatic fire alarm interface
Ventilation system
Please consult your distributor for connectable split type air conditioner.
Up to 100 Network Convertors may be connected in single VRF network system.
One Network Convertor is considered as a single refrigerant system,
irrespective of the number of connected single models.
LONWORKS®
Network
Specifications
Model name
Power Supply
Power Consumption (W)
Dimensions (H x W x D) (mm)
Weight (g)
Max. 128 indoor units
Security system
Dimensions
UTY-VGGXZ1
208-240V 50/60Hz, Single phase
8.5
67 x 288 x 211
1,500
(Unit : mm)
VRF network system 2
Specifications
Model name
Power Supply
Power Consumption (W)
Dimensions (H x W x D) (mm)
Weight (g)
Dimensions
(Unit : mm)
UTY-VLGX
208-240V 50/60Hz, Single phase
4.5
67 x 288 x 211
1,500
Transmission specifications (BMS side)
Transmission speed
Transceiver
Transmission way form
Terminal resistor
64
78 kbps
FT-X1 (Echelon® Corporation)
Free topology
None
(It attaches at the terminal of a network.)
65
CONVERTOR & ADAPTOR
BACnet ® Gateway
Max. controllable
Software
4
VRF network
systems
UTY-ABGX
Signal Amplifier
UTY-VSGXZ1
Max. controllable
• It is possible to connect medium to large sized BMS to VRF network system via BACnet®, a global standard for
open networks.
• A maximum of 1600 indoor units with 4 VRF network systems (a maximum of 400 indoor units & 100 outdoor
units for one network system) can be connected to one BACnet® Gateway.
• It is possible to control or monitor VRF network system from BMS via BACnet® Gateway.
• Compatible with BACnet® (ANSI / ASHRAE-135-2004) application specific controller (B-ASC).
• Compatible with BACnet®/IP over Ethernet.
• Scheduling function, Alarm & Event functions as well as Electricity Change Apportionment function are provided
in BACnet® Gateway.
• Connection between VRF network system to personal computer is possible via small U10 USB interface.
However, both U10 USB interface & personal computer are field supplied items.
• Corresponds to 7 different languages, English, Chinese, French, German, Spanish, Russian, Polish.
400
Outdoor units
Max. controllable
1,600
• Transmission Line length can be extended up to 3,600m with multiple
Signal Amplifiers.
• Up to 40 signal amplifiers can be installed in a VRF network system.
• A signal amplifier is required,
(1) When the total wiring length of the transmission line exceeds 500m.
(2) When the total number of units on the transmission line exceeds 64.
Indoor units
Installation example
Dimensions
(Unit : mm)
B
Installation example
A
C
D
VRF network system 1
BACnet ® Operator
Workstation (B-OWS)
BACnet ®
USB adaptor *1
Signal Amplifier
(Field supplied)
Indoor unit
Outdoor unit
Specifications
Lighting facilities
Model name
UTY-VSGXZ1
Power Supply
VRF network system 2
Security system
USB adaptor
Automatic fire alarm interface
(UTY-ABGX)
Indoor unit
Outdoor unit
Power Consumption (W)
4.5
Dimensions (H x W x D) (mm)
BACnet ® Gateway
(Field supplied)
208-240V 50/60Hz, Single phase
USB adaptor
67 x 288 x 211
Weight (g)
1,500
Ventilation system
(Field supplied)
DVD-ROM
(Software)
Software
Protection Key
= BACnet® Gateway for each system.
= USB cable
= Transmission line (VRF Network)
= Ethernet
USB adaptor
(Field supplied)
Max. 4 VRF network systems
*1: USB adaptor is U10 USB Network Interface of Echelon® Corporation.
External Switch Controller
UTY-TEKX
Air conditioner switching can be controlled by connecting other sensor switches
PERSONAL COMPUTER SPECIFICATIONS
• Microsoft® Windows® XP SP3 (32-bit) Professional
• In combination with a field supply Card-Key Switch or other sensor, the External Switch
Controller allows control of the ON / OFF, Room temperature, Fan speed and Master control
functions. This makes this product suitable for installations such as hotel rooms.
• Card-key or other sensor switches are available as a field supplied parts.
• Microsoft® Windows® Vista® SP2 (32-bit) Home Premium, Business
Operating system
• Microsoft® Windows® 7 SP1 (32/64-bit) Home Premium, Professional
[Supported languages]
Installation example
Electrical wiring
English, Chinese, French, German, Russian, Spanish, and Polish
Intel® CoreTM i3 2GHz or higher
Memory
2GB or more (Windows® XP, Vista®, 7 32-bit), 4GB or more (Windows® 7 64-bit)
HDD
40GB or more of free space
Display
1024 x 768 or higher resolution
Interface
USB port (x2-5) is required
Ethernet port is required
®
Auto mode operation, which switches the cooling and the heating
automatically, is enabled by using the sensor switch and External
Switch Controller.
Adobe Reader 9.0 or later
Hardware required
DVD-ROM Drive
Sensor SW
Indoor Unit
Indoor Unit
1
T1 = ON,
T2 = OFF
Cooling
T1
T2
2
3
Remote
Controller
Line
Note 1.
Please choose a thermosensor switch
which can be set up for T1 and T2.
E
COM SW1 SW2
External
input
Card-key
(Field supplied)
External Switch
Controller
1
2
3
E
Remote
Controller
Line
COM SW1 SW2
External
input
Sensor SW
(Field supplied)
External Switch
Controller
Note 2.
The remote controller's operation is
prior to the auto mode operation.
Heating
®
Software required
Card-key
Note: All indoor units will operate in the same mode.
Room temp.
CPU
Time
Specifications
<PACKING LIST>
Name and shape
Quantity
Model name
Application
UTY-TEKX
SU MO TU WE TH FR SA
7
3 6 9 12 15 18 21
DVD-ROM
Wibu Key
(Software protection key)
1
1
Includes the software and manuals for BACnet® Gateway.
Power Supply
Dimensions (H x W x D) (mm)
Software protection key to be inserted in a USB slot running BACnet® Gateway.
BACnet® Gateway may only run on a PC with Wibu Key.
Personal computer must be field supplied. U10 USB Network Interface must be field supplied. Contact Echelon® Corporation or its local sales representative for detail.
Product Name : U10 USB Network Interface - TP/FT-10 Channel Model Number : 75010R
Microsoft® Windows® 8 will be supported.(Future release)
66
Sensor SW
(Field supplied)
To individual dry contact
External Switch Controller (UTY-TEKX)
Weight (g)
DC 12V
120 x 75 x 30
100
DC12V is supplied by the indoor unit.
67
SERVICE & MONITORING
Service Tool
Software
Max. Monitor
100
UTY-ASGX
Outdoor units
Max. Monitor and
control
Extensive monitoring and analysis functions for installation and maintenance.
• Operation status can be checked and analyzed to detect even the small abnormalities.
• Data collected and stored on site can be checked later, off-line, off-site for more detail analysis.
• One VRF network system with maximum number of up to 400 units can be monitored and controlled.
• Operation status and various sensor information can be monitored and checked real time in the form of list, refrigerant circuit
diagram, graphs as well.
• Simple operation control functions are useful during maintenance.
• The recent error history can be retrieved from units on demand to perform analysis on the cause of the error, after connecting
Service Tool to the VRF network system.
• Commissioning tool supports test runs, data storage for each unit and saving of data as CSV files, which may be formatted to
create commissioning report.
• Connectable to any point of transmission line with USB adaptor*1 (field supplied)
• Connection between VRF network system to personal computer is possible via small U10 USB interface. However, both U10
USB interface & personal computer are field supplied items.
• 14 advanced functions are available for the VR-II series for through servicing and through shooting.
・The operating state (Solenoid valve) of RB unit can be checked.
400
Indoor units
* 1: Service Tool (UTY-ASGX) will only support USB type network adaptor and will not support transmission adaptor of the traditional type(UTR-YTMA)
5) Error History
6) Remote File Download
Displays the error information for each
unit. The error information can
sequentially be displayed up to 50 items
as they occur starting with the latest
error.
Operation and error history data can be
downloaded. Only the required data may
be downloaded specifying the refrigerant
system, unit and time range.
7) Commissioning Tool
8) Network Topology Analyzer *
Test run commands can be executed with this tool.
During test running, the outdoor unit / indoor unit sensor data can be saved
(commissioning log data).
After the end of test running, this data can be exported in CSV file format.
A list of units connected to the VRF system network is
displayed in network segments in tree form.
9) Remote Setting *
10) System Time Setting *
Function (Field) Setting for indoor unit is
realized remotely
An arbitrary time is set for all the remote controllers within the system.
11) Central Release *
12) Model Name Writer *
The operation setting restriction function of the indoor units set from the
controller can be forcibly released.(remote controller inhibit, temperature
upper/lower limit setting)
An arbitrary model name can be written to the target unit.
13) Error Memory Reader *
14) Time Guard Information *
When an error occurs at an outdoor unit, the operation data records before
the error are acquired over a network and saved to a CSV file.
Reference data for judging the maintenance period of indoor and outdoor
units (compressor,FAN, etc. integrated time) is output to a CSV file.
Wiring connection
Refrigerant piping
Indoor unit
USB adaptor
(Field supplied)
Transmission line
Indoor unit
(Field supplied)
Easy to
carry out with
USB adaptor
Note: To perform "Error Memory Reading", Service Tool and the corresponding outdoor unit must be connected directly with each other. Refer to
the Operation Manual of the Service Tool for detail.
*USB Adaptor is U10 USB Network interface of Echelon ® Corporation.
PERSONAL COMPUTER SPECIFICATIONS
Functions
1) System List
2) Equipment Detail (Diagram)
Displays the overall operation status of
all or specified units in the system in a
list form.
Displays the detail information for sensor
values, electrical components etc. for the
specified units in schematic. The
information here can be used along with
the detail information in list form, to
check the operation status of units and
make detail analysis on the cause, in
case an error occurs.
Operating system
• Microsoft® Windows® XP SP3 (32-bit) Professional
• Microsoft® Windows® Vista® SP2 (32-bit) Home Premium, Business
• Microsoft® Windows® 7 SP1 (32/64-bit) Professional
[Supported languages]
English only
CPU
1GHz or higher
Memory
512 MB or more (Windows® XP 32-bit)
1GB or more (Windows® Vista®, 7 32-bit)
2GB or more (Windows® 7 64-bit)
HDD
10GB or more of free space
Display
1024 x 768 or higher resolution
3) Equipment Detail (List)
4) Operation History
Interface
USB port for U10 USB Network Interface and Software protection key
Displays the detail information for sensor
values, electrical components etc. of
units in a specified refrigerant system in
list form. The information here can be
used along with the detail information in
diagram form, to check the operation
status of units and make detail analysis
on the cause, in case an error occurs.
The indoor units or outdoor unit
operation history can be recorded.
The displayed operation history can be
printed out and saved to a CSV file.
Software required
Internet Explorer 7.0 or 8.0 or 9.0 / Adobe® Reader® 9.0 or later
Hardware required
DVD-ROM Drive
<PACKING LIST>
Name and shape
Quantity
Application
DVD-ROM
1
Includes the software and manuals for Service Tool.
Wibu Key
1
Software protection key to be inserted in a USB slot running Service Tool.
Service Tool may only run on a PC with Wibu Key.
(Software protection key)
68
*: Supported by Ver. 1.1 or later
Personal computer must be field supplied. U10 USB Network Interface must be field supplied. Contact Echelon® Corporation or its local sales representative for detail.
Product Name : U10 USB Network Interface - TP/FT-10 Channel Model Number : 75010R
Microsoft® Windows® 8 will be supported.(Future release)
69
SERVICE & MONITORING
Web Monitoring Tool
Software
4
UTY-AMGX
VRF network
systems
can be supported
Product features
Max. Monitor
COMPARISON TABLE
400
No.
1
Interchangeability of equipment
1600
2
Indication of equipment list
3
Operation control
4
Indication of refrigerant circuit diagram
5
Commissioning tool
6
Monitoring of equipment information
7
Monitoring of operating condition
8
Monitoring of sensor data
9
Storage and CSV output of operating history (sensor data)
• Troubleshooting is performed by monitoring each unit remotely during periodical system checks off-site.
Outdoor units
• Operation status can be checked and analyzed to detect even the smallest abnormalities.
• Four VRF network systems each with 400 units, with maximum number of up to 1,600 units can be monitored and controlled.
Max. Monitor and
• Operation status and various sensor information can be monitored and checked real time in the form of list, refrigerant circuit diagram, and graphs as well.
control
• The monitoring data in a remote side can be optionally downloaded. And, this data can be displayed in off-line mode of the Service Tool.
• Error notification can be automatically transmitted to several locations using the internet*1.
Indoor unit
can be monitored
• Monitoring side computer is not required to install special software, requires only general web browser.
*2
• Connectable to any point of transmission line with U10 USB interface (field supplied)
• Connection between VRF network system to personal computer is possible via small U10 USB interface. However, both U10 USB interface &
personal computer are field supplied items.
・The operating state (Solenoid valve) of RB unit can be checked.
* 1: USB of internet mail system required.
* 2: Web Monitoring Tool (UTY-AMGX) will only support USB type network adaptor and will not support transmission adaptor of the traditional type (UTR-YTMA).
Web Monitoring System
Item
VRF network system Side
10
Indication of trend graph
11
Printing of trend graph
12
Monitoring and screen display of abnormalities
13
E-mail automatic transmission of abnormalities
14
Setting for user level
15
Network Topology Analyzer *
16
Remote Setting *
17
System Time Setting *
18
Central Release *
Internet
19
Model Name Writer *
or
20
Error Memory Reader *
21
Time Guard Information *
Monitoring Side
VRF Network System Side
Outdoor unit
Transmission line
Web Monitoring Tool
Public Telephone Line
Web Monitoring Tool
UTY-AMGX
Service Tool
UTY-ASGX
Monitoring Side
*1
*: Supported by Ver. 1.1 or later
*1: it is available only during a connection to the Internet.
USB adapter
(Field supplied)
PERSONAL COMPUTER SPECIFICATIONS
Indoor unit
System components
Monitoring Side
VRF Network System Side
Personal Computer
Software
Personal Computer
(Field Supplied)
(UTY-AMGX)
(Field Supplied)
Operating system
• Microsoft® Windows® XP SP3 (32-bit) Professional
• Microsoft® Windows® Vista® SP2 (32-bit) Home Premium, Business
• Microsoft® Windows® 7 SP1 (32/64-bit) Professional
[Supported languages]
English only
Support 4 VRF network systems
CPU
1GHz or higher
USB adaptor (max. 4 adaptors per PC) permit, monitoring of up to
1,600 indoor units.
Suitable for large-scale buildings or hotels.
Memory
1GB or more (Windows® XP, Vista®, 7 32-bit)
2GB or more (Windows® 7 64-bit)
HDD
40GB or more of free space
Public Telephone Line
1024 x 768 or higher resolution
USB adaptors
Interface
USB port (for U10 USB Network Interface Max.4 , Software protection key)
Either of the following interface is required for remote connection:
• Public Telephone LIne : Modem is required
• Internet using LAN : Ethernet port is required
USB
adaptor
Software required
Internet Explorer 7.0 or 8.0 or 9.0 / Adobe® Reader® 9.0 or later
(Field Supplied)
Hardware required
DVD-ROM Drive
Software
Protection
Key
Internet
or
Display
<PACKING LIST>
VRF Network System
Name and shape
Quantity
Application
VRF Network
System 1
VRF Network
System 2
VRF Network
System 3
VRF Network
System 4
DVD-ROM
1
Includes the software and manuals for Web Monitoring Tool.
Max. 400
Max. 400
Max. 400
Max. 400
Wibu Key
1
Indoor unit
Indoor unit
Indoor unit
Indoor unit
Software protection key to be inserted in a USB slot running Web Monitoring Tool.
Web Monitoring Tool may only run on a PC with Wibu Key.
(Software protection key)
Personal computer must be field supplied. U10 USB Network Interface must be field supplied. Contact Echelon® Corporation or its local sales representative for detail.
Product Name : U10 USB Network Interface - TP/FT-10 Channel Model Number : 75010R
Microsoft® Windows® 8 will be supported.(Future release)
70
71
DESIGN SUPPORT
Energy Recovery Ventilator
Models
Energy efficiency and ecology
UTZ-BD025B
UTZ-BD035B
UTZ-BD050B
UTZ-BD080B
UTZ-BD100B
Energy consumption is dramatically reduced by
using a counterflow heat-exchange element. Air
conditioning load is reduced by approximately 20%,
resulting in significant energy savings. Recovers up
to 77% of the heat in the outgoing air.
UTZ-BD025B
B
UTZ-BD035B
TZ BD035B
Slim shape and easier installation
20%
Counter-flow heat exchange element used for reduced noise and
slimmer, more compact bodyy shape.
Energy saving
Height
270mm
UTZ-BD025B
UTZ-BD050B
UTZ BD050
Features of heat exchange element
Height
317mm
With the cross-flow element, air moves in a straight line across the
element. With the counter-flow element , air flows through the
element for a longer time (longer distance) ,so the heat-exchange
effect remains unchanged.
Energy recovery ventilator unit offers
maximum comfort and greater energy savings..
UTZ-BD035B/BD050B
Height
388mm
UTZ-BD080B/BD100B
UTZ-BD080B
UTZ-BD100B
Other element
(Cross-flow element)
Reverse mountable direct air supply /
exhaust system
Fujitsu element
(Counter-flow element)
Adoption of straight air supply / exhaust system: Duct design
is simplified because the air supply / exhaust ducts are straight.
Quiet operation
Heat exchange ventilation and normal ventilation
Heat exchange ventilation
When a room is cooled or heated, the exhausted cooling / heating energy is
recovered by heat-exchange ventilation.
Significantly reducing low pressure loss and noise allows low-noise
operation.
Room air
Adopts a highly efficient counter-flow
heat exchange element
Normal ventilation
This is used in spring and autumn, when rooms are not cooled or heated, that
is, when there is little difference between the indoor and outdoor air conditions.
In addition, at night during the hot season, when the outside air temperature
drops the outside air is drawn inside without heat exchange, alleviating the
load on the air conditioning equipment.
Exhaust air
Heat exchanger
Outside air
Model No.
HEAT EXCHANGE
VENTILATION
Power source
Input power
Air flow rate
External static pressure
W
m3/h
NORMAL
VENTILATION
UTZ-BD025B
UTZ-BD035B
Straight
unit
Inspection
hatch
An external static pressure is improved by adopting a powerful fan
motor.
This allows for application in a wide variety building.
Supply air
Room air
500 m3/h
800 m3/h
1000 m3/h
UTZ-BD050B
UTZ-BD080B
UTZ-BD100B
Temperature Exchange
Efficiency
Pa
128 / 123 / 96
250 / 250 / 190
105 / 95 / 45
190 / 185 / 168
350 / 350 / 240
140 / 60 / 45
289 / 225 / 185
500 / 500 / 440
120 / 60 / 35
418 / 378 / 295
800 / 800 / 630
140 / 110 / 55
464 / 432 / 311
1000 / 1000 / 700
105 / 80 / 75
Extra high / High / Low
%
75 / 75 / 77
75 / 75 / 78
75 / 75 / 76
75 / 75 / 76
75 / 75 / 79
Energy Exchange
Efficiency Cooling
Extra high / High / Low
%
63 / 63 / 65
66 / 66 / 71
62 / 62 / 64
65 / 65 / 68
65 / 65 / 70
Energy Exchange
Efficiency Heat pump
Extra high / High / Low
%
70 / 70 / 72
69 / 69 / 73
67 / 67 / 69
71 / 71 / 74
71 / 71 / 76
Extra high / High / Low
Extra high / High / Low
Extra high / High / Low
Extra high / High / Low
Extra high / High / Low
dB*
31.5 / 30.5 / 26.5
128 / 123 / 96
250 / 250 / 190
105 / 95 / 45
31.5 / 30.5 / 26.5
882 x 599 x 270
29
150
-10 ~ 40
85
33 / 31 / 25.5
190 / 185 / 168
350 / 350 / 240
140 / 60 / 45
33 / 31 / 25.5
1050 x 804 x 317
49
150
-10 ~ 40
85
37.5 / 35.5 / 32.5
289 / 225 / 185
500 / 500 / 440
120 / 60 / 35
38.5 / 38 / 32.5
1090 x 904 x 317
57
200
-10 ~ 40
85
37.5 / 37 / 34.5
418 / 378 / 295
800 / 800 / 630
140 / 110 / 55
37.5 / 37 / 34.5
1322 x 884 x 388
71
250
-10 ~ 40
85
38.5 / 37.5 / 34.5
464 / 432 / 311
1000 / 1000 / 700
105 / 80 / 75
40.5 / 39.5 / 36.5
1322 x 1134 x 388
83
250
-10 ~ 40
85
W
m3/h
Pa
dB*
mm
kg
mm
°C
%
* The noise level must be measured 1.5 m below the centre of the unit.
72
350 m3/h
Room air
Exhaust air
Outside air
Reverse
mounted
unit
Exhaust air
(Unit : mm)
Models: UTZ-BD025B / UTZ-BD035B / UTZ-BD050B / UTZ-BD080B / UTZ-BD100B
220 - 240V, 50Hz
Extra high / High / Low
Extra high / High / Low
Extra high / High / Low
Sound pressure level
Input power
Air flow rate
External static pressure
Sound pressure level
Dimensions (W × D × H)
Weight
Outlet duct diameter
Operation range
Maximum humidity
Extended range of an external
static pressure
Dimensions
250 m3/h
Supply air
Inspection
cover
Specifications
Rated flow rate
Since each unit can be mounted in reverse position, only one
inspection hole is needed for two units: Two units can share
one inspection hole so duct work is easier and more flexible.
Maintenance opening
Maintenance space
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
UTZ-BD025B UTZ-BD035B UTZ-BD050B UTZ-BD080B UTZ-BD100B
1250
1250
1018
978
810
1134
884
904
804
599
678
428
640
580
315
228
228
132
112
142
600
600
600
600
600
1190
940
960
860
655
19
19
19
19
19
388
388
317
317
270
194
194
159
159
135
218
218
182
182
159
1322
1322
1090
1050
882
612
612
470
470
414
85
85
127
70
95
258
258
210
162
219
242
242
194
144
144
73
DESIGN SUPPORT
Auto Louver Grille Kit (Option)
Building Information Modeling (BIM)
Models
FUJITSU provides the Building Information Modeling (BIM) object models and contents
for our VRF system and some products to the architect, designer and contractor using
Autodesk® Revit® technology from our Website and Autodesk® Seek Website, etc.
UTD-GXSA-W
UTD-GXSB-W
UTD-GXSC-W
Simple flat Auto Louver will provide comfort
airflow and harmonize with luxury interior.
BIM Object Models Ensure Proper Design
Many products available
Closed louver
We provide BIM data for indoor units, outdoor units, and accessories.
We will continue to create and provide products to support the global market.
Opened louver
Flexible Control
Object models: VRF “AIRSTAGE V-II” /8 Rooms Multi “HFI” / Energy Recovery Ventilator
Files : Indoor units 75 files / Outdoor units 22 files / Options 15 files
Dimensions
with indoor unit
• Operation
Auto Louver can be operated by synchronizing remote controller
W2
Fitting Flame
of indoor unit.
•
Grille
3D and 2D product data
UP and Down auto swing
• Auto airflow direction and auto swing
• 4 steps selectable
louver
• Auto-closing
When operation of indoor unit is stopped, the louver will
H2
H1
automatically close.
W1
Auto Louver Grille
D1
We provide 3D data that is similar to the product appearance. 2D CAD design
operations are supported and 2D display is also provided.
The data can also be output in other formats, such as DXF and DWG, which are
used by other design CAD.
D2
Duct type
Unit: mm
Wired Remote
Controller
Wireles Remote
Controller
Model Name
W1
W2
UTD-GXSA-W
683
645
UTD-GXSB-W
883
845
UTD-GXSC-W
1,083
1,045
H1
H2
D1
D2
180
148
9
84
The equipment installation limitation range is shown. The distance range
from the wall, etc., is automatically displayed to make it easy to provide highly
reliable layout designs.
Installation information
Specifications
Model name
Applicable Indoor Unit
UTD-GXSA-W
UTD-GXSB-W
UTD-GXSC-W
ARXD07/09/12/14GALH
ARXD18GALH
ARXD24GALH
Other information, such as symbols showing the airflow direction that are
required for installation drawings, is built in and can be automatically reflected in
2D drawings. Installation drawings can be created easily.
Connecting with Control box of indoor unit
Power Supply
Screw ¿xing to Flange or Square Duct
Fixing of Auto Louver Grille
Extension Square Duct Limit
1.0m (Max. duct length between indoor unit and Grille)
mm
(inch)
Net Dimension
(H x W x D)
Weight
Installation limitation
Net
Gross
kg
(lb.)
Color
180x683x(84+9)
180x883x(84+9)
180x1083x(84+9)
[7-3/32x26-7/8x(3-5/16+11/32)]
[7-3/32x34-3/4x(3-5/16+11/32)]
[7-3/32x42-5/8x(3-5/16+11/32)]
2.0 (4.4)
2.5 (5.6)
3.0 (6.7)
3.0 (6.7)
3.5 (7.8)
4.0 (8.9)
Product specifications & Link information
Contains the basic information required for air conditioner design, including unit
size, capacity, input power, noise, and airflow rate.
*:URL: http://airstage.fujitsugeneral.com
White
Louver Motor
Stepping Motor
Accessories
Fitting Flame, etc.
Cooling
Operation range
Heating
°C (°F)
18 to 32 (64 to 90)
% RH
80% or less
°C (°F)
16 to 30 (60 to 88)
Data volume
Fujitsu Revit® files are small, requiring very little system resources.
Product parameter
Power source
Input power
Capacity
Airflow rate
Sound pressure level
Dimensions
Weight
Connection pipe diameter
Refrigerant
Material/Color
Link
+
FUJITSU GENERAL
Website*
* : URL:http://www.fujitsu-general.com/index.html
Required software
74
Autodesk® Revit® series software
Data format
・Autodesk® Revit® Architecture
・Autodesk® Revit® MEP
・Autodesk® Revit® Structure
・RFA
75
DESIGN SUPPORT
Design Simulator
Enter your requirements, select your controls and options,
design your layout and let the program do the rest.
Put the charts and pens away and design your projects on your computer with ease using the Design Simulator. Everything from selecting
indoor and outdoor units, allocating controls and optional parts to designing the piping and wiring systems is made easier using the program's
built-in features. Once your project is designed take advantage of the Export functions to easily get materials lists, product specifications,
refrigerant calculations and more - it'll even export to Word or Excel formats, and group the relevant CAD data for your project.
Select Your Preferences
Select your language, region, default unit names and your
preferred units of measurement. The program will then perform
the required calculations and return the results in the format you
want to see. Once this is done once, the program will remember
your choices for future use.
Update your Design Simulator
1) Input Project Details
2) Selection of Series
Enter the details of the
project (optional)
Select which series of
equipment you are after,
systems which share
common units are grouped
together.
The information specific to your project can be exported in a
number of industry standard file formats.
• Word format (rtf)
• Excel format (csv)
• 2D Data (DXF) • 3D Data (RFA)
• AutoCAD format (DXF)
Update your Design Simulator
3) Select Indoor units
4) Select Outdoor Units
Enter the Indoor Unit
Requirements and conditions
- then use automatic or
manual selection to
determine the unit to suit
your needs.
Add Indoor units to each
system, then determine the
Outdoor unit to suit your
needs. If indoors in Step 3
were selected using Auto
selection, Step 4 may
reselect these indoors to suit
the actual capacity
Database can be easily updated online using AutoUpdate function
through FTP. Once you hit update, the program will connect to the
online server and tell you if a newer version is available.
Information on the
latest history update is
demanded.
Information on the
latest history update
replies.
User side(PC)
FTP server side (PC)
Installation Requirements
Software
Operating System
5) Piping Diagram / Input piping lengths
6) Wiring Diagram / Grouping of Remote Controllers
Piping diagrams are
automatically created for
each refrigerant system and
information for each unit is
automatically displayed.
When the piping lengths are
added the refrigerant
charge is calculated and
any additional refrigerant is
shown.
Wiring and remote control
diagrams are automatically
created for each refrigerant
system. Set remote
controller groups and
addition of unit accessories
and optional parts here.
System Requi rements
Design Simulator
Microsoft Windows XP / Vista / 7
CPU: 500 MHz or faster
Hardware
Memory: 2GB (Vista/7) 512MB (XP) or more
HDD: 1GB or more
Display
Resolution: 1024 x 768 or higher
Internet Explorer 7.0 or newer
Software
Adobe Reader 9.0 or newer
Microsoft Word 2003 or newer
Program Features and Specifications
Language
Brand Setting
Preferences
Unit Naming
Choose from 26 different languages
Select Fujitsu or General for products specific to your region
Choose default name for automatic naming of Indoor and
Outdoor Units. i.e. Indoor = FCU, IU or AC. Outdoor = CU or OU
Set your preferred measurement units for Temperature,
Unit and Piping Size, Weight, Capacity and Airflow
Automatic Selection for Indoor Units, Outdoor Units, Piping and Wiring using the criteria you enter
Manually select the units of your choice
Select from suggested Optional parts to suit your systems
Select from Controllers / Adapters / Convertors for your project
Automatic creation of piping and wiring diagrams for the systems you designed
Modify the piping and wiring diagrams to suit your specific installation
Materials List
Product Detail (Specifications, Options, Photographs)
Piping and Wiring Diagrams
Additional Refrigerant Calculation automatic when piping lengths are entered
CAD Data for models specific to your project in 2D - DXF or 3D RFA formats
Word (RTF format)
Excel (CSV format)
DXF format
Automatic Update via FTP through internet (AutoUpdate button)
Download the latest version of the program if Autoupdate is unavailable due to firewall etc
Measurement Unit Setting
5) Central Controller and Converter options
8) Display and Export Project Report
Select any central
controllers and converters
that are to be used on the
system. There is an Auto
function available to let the
program determine home
many of each control you
require for the system as
designed.
View materials list for the
project. Select which
components are to be
included into report and then
export as csv, rtf or dxf
format. You can also
include the CAD data in your
export to suit the models on
your project - in 2D DXF or
3D RFA formats.
Model Selection Options
System Design
Project and Model Information
Report Export Formats
Update Options
*For further assistance, follow the link in the program to the online Movie Manual to view step by step explanations of all you need to know.
76
Note: Models are added and updated constantly, specifications are subject to change without notice.
Update your system to ensure you have the latest information.
77
OPTION
Optional Parts
Others
Controllers
Wired Remote Controller
(Touch Panel )
Wired Remote Controller
Simple Remote Controller
Flange (Round)
Flange (Square)
Remote Sensor Unit
UTY-RNK*
UTY-RSK*
UTD-RF204
UTD-SF045T
UTY-XSZX
For Low Static Pressure Duct type /
Medium Static Pressure Duct type /
Ceiling type
For Low Static Pressure Duct type /
Medium Static Pressure Duct type
For All Duct type
With operation mode
UTY-RNR*
New amenity space can be
offered by installing
the Remote sensor.
Simple Remote Controller
Wireless Remote Controller
IR Receiver Unit
UTY-RHK*
UTY-LNH*
UTB-YWC
Without operation mode
Long-Life Filter
Long-Life Filter
Auto Louver Grille Kit
UTD-LF25NA
UTD-LF60KA
For Low Static Pressure Duct type /
Medium Static Pressure Duct type
For High Static Pressure Duct type
(ARXC36/45/60GATH)
UTD-GXSA-W (for ARXD07/09/12/14GALH)
UTD-GXSB-W (for ARXD18GALH)
UTD-GXSC-W (for ARXD24GALH)
For Slim Duct type
For All Duct type
IR Receiver Unit
Group Remote Controller
Central Remote Controller
UTY-LRH*B1
UTY-CGG*
UTY-DCG*
Drain Pump Unit
Drain Pump Unit
Wide Panel
UTZ-PX1BBA
UTR-DPB24T
UTG-AGYA-W
For Low Static Pressure Duct type
For Ceiling type
For Cassette type
UTZ-PX1NBA
Indoor unit
950
For Low Static Pressure Duct type /
Medium Static Pressure Duct type
For Cassette type
Panel 600
Touch Panel Controller
System Controller
UTY-DTG*
UTY-APGX
600
Software
Air Outlet Shutter Plate
Air Outlet Shutter Plate
Panel Spacer
UTR-YDZB
UTR-YDZC
UTG-BGYA-W
For Compact Cassette type
For Cassette type
For Cassette type
Shuts the air outlet when only using as 3 blow out.
Shuts the air outlet when only using as 3 blow out.
(mm)
50mm
R*: RY (FUJITSU), RG (GENERAL)
K*: KY (FUJITSU), KG (GENERAL)
H*: HY (FUJITSU), HG (GENERAL)
G*: GY (FUJITSU), GG (GENERAL)
Panel spacer
Convertors / Adaptors
Network Convertor
Network Convertor
BACnet ® Gateway
UTY-VGGXZ1
for LONWORKS®
UTY-VLGX
UTY-ABGX
Software
78
External Switch Controller
UTY-VSGXZ1
UTY-TEKX
Cassette Grille
Insulation Kit for High Humidity
UTG-UFYC-W
UTG-UFGC-W
UTG-UGYA-W
UTG-UGGA-W
UTZ-KXGA For Cassette type
UTZ-KXGB For Slim Cassette type
UTZ-KXGC For Compact Cassette type
Insulation Kit
DVD-ROM
(Software)
Signal Amplifier
Cassette Grille
For Compact Cassette type
For Cassette type
Fresh Air Intake Kit
Fresh Air Intake Kit
UTZ-VXAA
UTZ-VXGA
For Compact Cassette type
For Cassette type
Software
Protection Key
79
OPTION
REFERENCE
Optional Parts
Applications
Connection Units
There are many applications for Airstage VRF systems including such markets as education,
healthcare,hospitality, utilities, office buildings, apartment buildings, condominiums, and restaurants.
Note: VRF Heat Recovery system provides simultaneous Heating and Cooling. System operates both
Heating mode and Cooling mode.
Separation Tube
Separation Tube
UTR-BP090X
UTP-AX090A
UTR-BP180X
UTP-AX180A
Gas Pipe
Gas Pipe
Gas Pipe
Gas Pipe
Liquid Pipe
Liquid Pipe
Liquid Pipe
Liquid Pipe
Outdoor Unit Branch kit
Separation Tube
UTR-CP567X
UTP-AX567A
UTR-BP567X
Gas Pipe
Liquid Pipe
UTP-CX567A
Gas Pipe
Gas Pipe
Gas Pipe
Liquid Pipe
Liquid Pipe
Liquid Pipe
Medical and Healthcare Facilities
VRF gives each patient individual control of their
room temperature. Central control ensures that air
conditioning is only delivered to rooms that are
occupied.
INDIVIDUAL CONTROL
VRF gives each patient or each room individual
control of their room temperature.
Header
Header
UTR-H0906L
UTR-H1806L
UTR-H0908L
UTR-H1808L
Gas Pipe
Liquid Pipe
CLEAN AIR
Gas Pipe
VRF systems can use ductless indoor units
reducing the time and expense of maintaining a
HVAC system and eliminating the risk of
duct-borne molds and bacteria.
Liquid Pipe
CENTRAL CONTROL
Powerful central control ensures that heating and
cooling are delivered to rooms that are
occupied. This provides enormous savings for
facilities with revolving occupancy.
EV Kit
UTR-EV09XB
UTR-EV14XB
MAINTENANCE
Since each refrigerant circuit has the ability to
operate independently, a properly designed VRF
system can add a layer of security to a HVAC
system. If an individual unit needs to be shut down
for repairs, the rest of the system can operate
normally.
Specifications
Outdoor unit Branch kit
UTR-CP567X or UTP-CX567A
Model name
Number of Outdoor unit
2 outdoor units
1
3 outdoor units
2
FRESH AIR
Separation Tube
Model name
Total cooling capacity of indoor unit (kW)
UTR-BP090X or UTP-AX090A
UTR-BP180X or UTP-AX180A
UTR-BP567X or UTP-AX567A
28.0 or less
28.1 to 56.0
56.1 or more
3-6 Branches
UTR-H0906L
UTR-H1806L
3-8 Branches
UTR-H0908L
UTR-H1808L
28.0 or less
28.1 to 56.0
Header
Model name
Total cooling capacity of indoor unit (kW)
VRF systems can be integrated with fresh air
systems to ensure that air quality meets the needs
of the occupants. VRF provides the most
comfortable environment for all occupants.
EV Kit
Model name
UTR-EV09XB
UTR-EV14XB
Application Model
AS*E07GACH
AS*E09GACH
AS*E12GACH
AS*E14GACH
AS*: ASY(FUJITSU), ASH(GENERAL)
80
81
REFERENCE
Applications
Educational and Religious Facilities
Office Buildings and Retail Spaces
In a school, an investment in VRF is an investment
in your community. VRF is more efficient than
conventional systems, providing financial savings
to the school for many years. Also, a quiet VRF
system creates a much better learning environment
for students.
VRF provides a comfortable work environment
for all employees. Zoning ensures that energy is
only used to cool/heat occupied offices. Quiet
indoor units and precise temperature control
creates the most comfortable and productive
work environment.
HEALTHIER FACILITY
QUIET
VRF systems can be integrated with fresh air
systems to ensure that air quality meets the needs
of the teachers and students.
Indoor units and outdoor units creates a pleasant
work environment and reduces noise complaints.
CENTRAL CONTROL
Save energy by heating and cooling occupied
offices. No more hot/cold calls since each zone or
tenant has individual control of the set temperature.
ZONING
Powerful central control can monitor and control
individual schools, or an entire college campus,
from a single location.
CONTROL
ZONING
Save energy by heating and cooling the classrooms
that are occupied. Set temperature can
pre-programmed to meet the energy budget for the
school district.
Powerful controls options can manage and monitor
entire building from a single location.
COMFORT
VRF helps achieve a healthier, quieter, more
comfortable and productive learning environment.
EASE OF INSTALLATION
Can be installed in occupied office spaces with
minimal disruption to occupants. Can even be
installed without disrupting the existing HVAC
system.
FLEXIBLE
As tenants and office configurations change, VRF
system configurations can also be modified (within
original design constraints) to meet the needs of
new tenants.
COMFORT
VRF provides a comfortable work environment for
all employees. Quiet indoor units and precise
temperature control creates the most comfortable
and productive work environment.
82
83