Chauvet SlimPAR QUAD 3 IRC User manual

User Manual
TABLE OF CONTENTS
1. Before You Begin .......................................................................................................... 3
What Is Included ............................................................................................................................... 3
Unpacking Instructions ..................................................................................................................... 3
Claims ....................................................................................................................................................... 3
Text Conventions ............................................................................................................................. 3
Symbols ............................................................................................................................................ 3
Disclaimer ......................................................................................................................................... 3
Product at a Glance .......................................................................................................................... 4
Safety Notes ..................................................................................................................................... 4
2. Introduction ................................................................................................................... 5
Overview........................................................................................................................................... 5
Dimensions ....................................................................................................................................... 6
3. Setup .............................................................................................................................. 7
AC Power ......................................................................................................................................... 7
Fuse Replacement .................................................................................................................................... 7
Power Linking ............................................................................................................................................ 8
Mounting ........................................................................................................................................... 9
Orientation ................................................................................................................................................. 9
Rigging ...................................................................................................................................................... 9
4. Operation ......................................................................................................................10
Control Panel Operation ................................................................................................................. 10
Menu Map....................................................................................................................................... 10
Configuration (DMX) ....................................................................................................................... 10
Starting Address ...................................................................................................................................... 10
DMX Channel Modes, Assignments, and Values .......................................................................... 11
9-Channel ................................................................................................................................................ 11
4-Channel ................................................................................................................................................ 11
Configuration (Standalone) ............................................................................................................ 12
Sound-Active Mode ................................................................................................................................. 12
Sound Sensitivity ..................................................................................................................................... 12
Automatic Mode....................................................................................................................................... 12
Program Speed ....................................................................................................................................... 12
Static Colors ............................................................................................................................................ 13
Custom Color Mixing ............................................................................................................................... 13
Selecting the Dimmer Mode .................................................................................................................... 13
IRC-6 Infrared Remote Control ................................................................................................................ 13
Master/Slave Mode .................................................................................................................................. 15
5. Technical Information ..................................................................................................16
Product Maintenance ..................................................................................................................... 16
6. Technical Specifications..............................................................................................17
Returns ........................................................................................................................................... 18
Contact Us .......................................................................................................................19
Page 2 of 19
SlimPAR™ QUAD 3 IRC User Manual Rev. 2
1. BEFORE YOU BEGIN
What Is
Included
·
·
SlimPAR™ QUAD 3 IRC
Hanging Bracket with Mounting
Hardware
·
·
·
Power Cord
Warranty Card
Quick Reference Guide
Unpacking
Instructions
Carefully unpack the product immediately and check the container to make sure all the
parts are in the package and are in good condition.
Claims
If the box or the contents (the product and included accessories) appear damaged from
shipping, or show signs of mishandling, notify the carrier immediately, not CHAUVET®.
Failure to report damage to the carrier immediately may invalidate your claim. In
addition, keep the box and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping,
or concealed damage, file a claim with CHAUVET® within 7 days of delivery.
Text
Conventions
Symbols
Convention
1–512
50/60
Settings
Menu > Settings
<ENTER>
ON
Symbol
Meaning
A range of values
A set of values of which only one can be chosen
A menu option not to be modified
A sequence of menu options to be followed
A key to be pressed on the product’s control panel
A value to be entered or selected
Meaning
Critical installation, configuration, or operation information. Not
following these instructions may make the product not work, cause
damage to the product, or cause harm to the operator.
Important installation or configuration information. The product
may not function correctly if this information is not used.
Useful information.
Disclaimer
The information and specifications contained in this User Manual are subject to change
without notice. CHAUVET® assumes no responsibility or liability for any errors or
omissions, and reserves the right to revise or recreate this manual at any time.
Download the latest version from www.chauvetlighting.com.
© Copyright 2014 CHAUVET®. All rights reserved.
Electronically published by CHAUVET® in the United States of America.
SlimPAR™ QUAD 3 IRC User Manual
Author
Date
Editor
Date
A. Leon
01/31/14
L. Henry
02/05/14
Page 3 of 19
Product at a
Glance
Use on Dimmer
Outdoor Use
Sound-Activated
DMX
Master/Slave
Safety Notes
Auto Programs
Auto-ranging Power Supply
Replaceable Fuse
User-Serviceable
P
P
P
x
These notes include important information about the mounting, usage, and maintenance
of this product; read before using the product.
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
Page 4 of 19
x
x
P
P
P
Always connect the product to a grounded circuit to avoid the risk of electrocution.
Always disconnect the product from the power source before cleaning or replacing
the fuse.
Avoid direct eye exposure to the light source while the product is on.
Make sure the power cord is not crimped or damaged.
Never disconnect the product from power by pulling or tugging on the cord.
If mounting the product overhead, always secure to a fastening device using a
safety cable.
Make sure there are no flammable materials close to the product when operating.
Do not touch the product’s housing when operating because it may be very hot.
Always make sure that the voltage of the outlet to which you are connecting the
product is within the range stated on the decal or rear panel of the product.
The product is for indoor use only! (IP20) To prevent risk of fire or shock, do not
expose the product to rain or moisture.
Always install the product in a location with adequate ventilation, at least 20 in
(50 cm) from adjacent surfaces.
Be sure that no ventilation slots on the product’s housing are blocked.
Never connect the product to a dimmer.
Make sure to replace the fuse with another of the same type and rating.
Never carry the product from the power cord or any moving part. Always use the
hanging/mounting bracket or the handles.
The maximum ambient temperature (Ta) is 104 °F (40 °C). Do not operate the
product at higher temperatures.
In the event of a serious operating problem, stop using the product immediately.
Never try to repair the product. Repairs carried out by unskilled people can lead to
damage or malfunction. Contact the nearest authorized technical assistance center.
This product is not intended for permanent installation.
Keep this User Manual for future use. If you sell the product to another user, be
sure to give this document to the next owner.
SlimPAR™ QUAD 3 IRC User Manual Rev. 2
2. INTRODUCTION
Overview
DMX In
Safety Loop
Power In
Fuse Holder
Microphone
Control
Buttons
Display
DMX Out
Power Out
Back Panel View
SlimPAR™ QUAD 3 IRC User Manual
Page 5 of 19
Dimensions
7.4 in
187 mm
8.3 in
210 mm
4.3 in
108 mm
Page 6 of 19
SlimPAR™ QUAD 3 IRC User Manual Rev. 2
3. SETUP
AC Power
The SlimPAR™ QUAD 3 IRC has an auto-ranging power supply and it can work with an
input voltage range of 100–240 VAC, 50/60 Hz.
To determine the product’s power requirements (circuit breaker, power outlet, and
wiring), use the current value listed on the label affixed to the product’s back panel, or
refer to the product’s specifications chart. The listed current rating indicates the
product’s average current draw under normal conditions.
Always connect the product to a protected circuit (circuit breaker or fuse). Make
sure the product has an appropriate electrical ground to avoid the risk of
electrocution or fire.
Never connect the product to a rheostat (variable resistor) or dimmer circuit, even
if the rheostat or dimmer channel serves only as a 0—100% switch.
Fuse
Replacement
Disconnect the product from power before replacing the fuse.
1.
2.
3.
4.
5.
6.
Disconnect the product from power.
Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
Pry the fuse holder out of the housing.
Remove the blown fuse from the holder.
Replace with a fuse of the exact same type and rating.
Insert the fuse holder back in place and reconnect power.
Installed fuse
(held by plastic clip)
Safety cap
Spare fuse holder
(inside safety cap)
A spare fuse is not included; however, the safety cap has room for a spare.
Always replace a blown fuse with another of the same type and rating.
SlimPAR™ QUAD 3 IRC User Manual
Page 7 of 19
Power Linking
Power Linking
Diagram
The product provides power linking via the Edison/IEC outlet located in the back of the
unit.
st
1 Product
nd
2 Product
rd
3 Product
Additional Products
You can power link up to 21 SlimPAR™ QUAD 3 IRC units on 120 VAC or up to
39 SlimPAR™ QUAD 3 IRC units on 230 VAC.
The power linking diagram shown above corresponds to the North American
version of the product ONLY! If using the product in other markets, you must
consult with the local CHAUVET® distributor as power linking connectors and
requirements may differ in your country or region.
Page 8 of 19
SlimPAR™ QUAD 3 IRC User Manual Rev. 2
Mounting
Before mounting the product, read and follow the safety recommendations indicated in
the Safety Notes. For our CHAUVET® line of mounting clamps, go to
www.chauvetlighting.com/cables-clamps-main.html/.
Orientation
The SlimPAR™ QUAD 3 IRC may be mounted in any position; however, make sure
adequate ventilation is provided around the product.
Rigging
·
Before deciding on a location, always make sure there is easy access to the product
for maintenance and programming.
·
Make sure that the structure or surface onto which you are mounting the product
can support the product’s weight (see the Technical Specifications).
·
When mounting the product overhead, always use a safety cable (such as CH-05
from CHAUVET®). Mount the product securely to a rigging point, such as an
elevated platform or a truss.
·
When rigging the product onto a truss, you should use a mounting clamp of
appropriate weight capacity. The brackets have a 13-mm hole, which is appropriate
for this purpose.
·
When power linking multiple products, you must always consider the length of the
power linking cable and mount the products close enough for the cable to reach.
·
The bracket adjustment knobs allow for directional adjustment when aiming the
product to the desired angle. Only loosen or tighten the bracket knobs manually.
Using tools could damage the knobs.
·
The double-bracketed yoke also serves as a floor support. When mounting the
product on the floor, make sure that the product and cables are away from people
and vehicles.
Safety Cable
0
Mounting Clamp
Double-Bracketed
Yoke
Bracket Adjustment Knobs
Mounting Diagram
Overhead
Mounting
Floor
Mounting
When using only one mounting clamp, be sure to use a clamp with a captive bolt to
prevent accidental loosening.
SlimPAR™ QUAD 3 IRC User Manual
Page 9 of 19
4. OPERATION
Control Panel
Operation
To access the control panel functions, use the four buttons located underneath the
display.
Button
<MENU>
<UP>
Menu Map
Function
Selects an operation mode or backs out of the current menu option
Scrolls up the list of options or selects a higher value
<DOWN>
Scrolls down the list of options or selects a lower value
<ENTER>
Activates a menu option or a selected value
Mode
Programming Steps
Description
DMX
Personalities
and Starting
Address
4-CH
Static Colors
C--
C 1—C 15 Selects static color
Auto Programs
P--
P 1—P 4
Program Speed
S--
S 1—S100 Selects auto program speed (slow to fast)
Sound-Active
Mode
Snd
Sound
Sensitivity
SenS
d 1—d512
9-CH
U--
Selects auto program
Snd1
Selects Sound-Active program (4-color)
Snd2
Selects Sound-Active program (15-color)
u 1—u100 Sets sound sensitivity
r 0—r255
Custom Color
Mixing
Selects the DMX personality and
starting address
Red (0—100%)
g 0—g255 Green (0—100%)
b 0—b255 Blue (0—100%)
A 0—A255 Amber (0—100%)
Dimmer Mode
Infrared
Configuration
(DMX)
Starting Address
dIM
SET
OFF
Dimmer, off
dIM1
Dimmer, fast speed
dIM2
Dimmer, medium speed
dIM3
Dimmer, slow speed
On
OFF
Turns infrared on or off
Set the product in DMX mode to control with a DMX controller.
1. Connect the product to a suitable power outlet.
2. Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket on the product.
When selecting a starting DMX address, always consider the number of DMX channels
the selected DMX mode uses. If you choose a starting address that is too high, you could
restrict the access to some of the product’s channels.
The SlimPAR™ QUAD 3 IRC uses up to 9 DMX channels in its 9-channel DMX mode,
which defines the highest configurable address to 504.
If unfamiliar with DMX, download the DMX Primer from www.chauvetlighting.com.
To select the DMX personality and starting address, do the following:
1. Press <MENU> repeatedly until 4-CH (4-channel mode) or 9-CH (9-channel mode)
shows on the display.
2. Press <ENTER> and d 1—d512 shows on the display.
3. Use <UP> or <DOWN> to select the starting address.
4. Press <ENTER>.
Page 10 of 19
SlimPAR™ QUAD 3 IRC User Manual Rev. 2
DMX Channel Modes, Assignments, and Values
9-Channel
Channel
Function
1
2
3
4
Red
Green
Blue
Amber
5
Color
Strobe
6
8
9
4-Channel
Auto Programs
Dimmer
Dim Mode
Channel
Function
Setting
0 to 100%
0 to 100%
0 to 100%
0 to 100%
No function
Color macros
No function
Slow to fast
000 ó 031
Auto programs speed, slow to fast
(when Channel 7 is 032 to 223)
No function
032 ó 063
0 to 100%
064 ó 095
100% to 0
096 ó 127
100% to 0 to 100%
128 ó 159
Color fade
160 ó 191
192 ó 223
4-color snap
15-color snap
224 ó 255
Sound-Active
000 ó 255
0 to 100%
000 ó 051
Dimmer mode manually set in Menu Options
052 ó 101
102 ó 152
Dimmer mode off
Dimmer mode 1 (fast speed)
153 ó 203
Dimmer mode 2 (medium speed)
204 ó 255
Dimmer mode 3 (slow speed)
000 ó 255
Speed
7
Value
000 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 015
016 ó 255
000 ó 010
011 ó 255
Value
Setting
1
Red
000 ó 255 0 to 100%
2
Green
000 ó 255 0 to 100%
3
Blue
000 ó 255 0 to 100%
4
Amber
000 ó 255 0 to 100%
SlimPAR™ QUAD 3 IRC User Manual
Page 11 of 19
Configuration
(Standalone)
1.
2.
Set the product in one of the standalone modes to control without a DMX
controller.
Connect the product to a suitable power outlet.
Never connect a product that is operating in any standalone mode (Static, Auto, or
Sound-Active) to a DMX string connected to a DMX controller. Products in
standalone mode may transmit DMX signals that could interfere with the DMX
signals from the controller.
Sound-Active
Mode
Sound Sensitivity
To enable the Sound-Active mode, do the following:
1. Press <MENU> repeatedly until Snd shows on the display.
2. Press <ENTER> and Snd1 (4-color) or Snd2 (15-color) shows on the display.
3. Use <UP> or <DOWN> to select the desired Sound-Active program.
4. Press <ENTER>.
To set the sound sensitivity, follow the instructions below:
1. Press <MENU> repeatedly until SenS shows on the display.
2. Use <UP> or <DOWN> to select the desired sound sensitivity (u 0–u100).
3. Press <ENTER>.
The product will only respond to low frequencies of music (bass and drums).
Automatic Mode
To enable the Automatic mode, do the following:
1. Press <MENU> repeatedly until P-- shows on the display.
2. Press <ENTER> and P 1–P 4 shows on the display.
3. Use <UP> or <DOWN> to select the desired auto program:
4.
Program Speed
Page 12 of 19
·
P 1 - 4-color snap
·
P 2 - 4-color fade
·
P 3 - 15-color snap
·
P 4 - 15-color fade
Press <ENTER>.
To set the auto program speed, follow the instructions below:
1. Press <MENU> repeatedly until S-- shows on the display.
2. Use <UP> or <DOWN> to select the desired auto program speed
S 1–S100 (slow to fast).
3. Press <ENTER>.
SlimPAR™ QUAD 3 IRC User Manual Rev. 2
Static Colors
Custom Color
Mixing
To select a preset static color, do the following:
1. Press <MENU> repeatedly until C-- shows on the display.
2. Press <ENTER> and C 1—C 15 shows on the display.
3. Use <UP> or <DOWN> to select the desired preset color:
4. Press <ENTER>.
To custom mix a color, follow the instructions below:
1. Press <MENU> repeatedly until U-- shows on the display.
2. Press <ENTER> and one of the following colors shows on the display: rXXX (red),
gXXX (green), bXXX (blue), or AXXX (amber).
3. Press <ENTER> repeatedly to select the desired color.
4. Use <UP> or <DOWN> to select the desired color value (0–255).
NOTE: Selecting 0 will turn the color off.
5. Press <ENTER> to select color value and continue to the next color.
6.
Selecting the
Dimmer Mode
To select the dimmer mode, do the following:
1. Press <MENU> repeatedly until dIM shows on the display.
2. Press <ENTER> and one of the following shows on the display:
3.
4.
IRC-6 Infrared
Remote Control
Repeat steps 3 to 5 until you create your desired color.
·
OFF (dimmer speed off)
·
dIM1 (dimmer mode 1, fast speed)
·
dIM2 (dimmer mode 2, middle speed)
·
dIM3 (dimmer mode 3, slow speed)
Use <UP> or <DOWN> to select the desired dimmer mode.
Press <ENTER>.
The SlimPAR™ QUAD 3 IRC is fully compatible with the IRC-6 infrared remote control
from CHAUVET®. To enable use with the IRC-6, follow the instructions below:
1. Press <MENU> repeatedly until SET shows on the display.
2. Press <ENTER> and On (turns on the infrared sensor) or
OFF (turns off the infrared sensor) shows on the display.
3. Press <UP> or <DOWN> to select the desired option.
4. Press <ENTER>.
SlimPAR™ QUAD 3 IRC User Manual
Page 13 of 19
IRC-6 (Infrared Remote Control 6) Operation (Sold separately, available from CHAUVET®)
Note: Make sure to point the IRC-6 directly at the receiver on the product.
Automatic Mode
Automatic mode will enable you to run the automatic programs on the product.
To turn on Automatic mode:
1. Press <AUTO> on the IRC-6.
2. Press <+> or <–> to choose between the different auto programs.
To adjust the speed of the automatic program:
1. Press <SPEED> on the IRC-6.
2. Press <%>.
3. Press <+> or <–> to either increase or decrease the speed of the program.
Sound-Active Mode
Sound-Active mode will enable the product to respond to the music.
To turn on Sound-Active mode:
·
Press <SOUND> on the IRC-6.
To adjust sound sensitivity in Sound-Active mode:
1. Press <SENSITIVITY> on the IRC-6.
2. Press <%>.
3. Press <+> or <–> to either increase or decrease sound sensitivity.
Manual Color Control
To choose a specific color with the IRC-6:
1. Press <MANUAL> on the IRC-6.
2. Press any number between <0> and <9> to choose your color.
To manually control the RGBWA+UV percentage:
1. Press <MANUAL> on the IRC-6.
2. Press <R>, <G>, <B>, <W>, <A>, or <UV> (red, green, blue, white,
amber, or ultraviolet) to choose your color.
Note: To use the white, amber, or UV color options, the fixture must be
capable of outputting that corresponding color light.
3. Press <+> or <–> to increase or decrease the percentage of each color.
Miscellaneous Operation
To adjust the strobe rate of the program:
1. Press <STROBE> on the IRC-6.
2. Press <+> or <–> to increase or decrease the strobe rate.
3. Press <STROBE> again to turn off the strobe.
To fade the light output:
·
Press <FADE> on the IRC-6.
To black out the lights:
·
Page 14 of 19
Press <BLACK OUT> on the IRC-6. This will turn off all the lights until the
button is pressed again.
Note: The IRC-6 will not respond to any inputs when Black Out is activated.
If the remote does not respond when a button is pressed, try pressing
<BLACK OUT>. You may have inadvertently activated Black Out.
SlimPAR™ QUAD 3 IRC User Manual Rev. 2
Master/Slave
Mode
The Master/Slave mode allows a single SlimPAR™ QUAD 3 IRC unit (the “master”) to
control the actions of one or more SlimPAR™ QUAD 3 IRC units (the “slaves”) without
the need of a DMX controller. The master unit will be set to operate in either Automatic
or Sound-Active mode, while the slave units will be set to operate in Slave mode. Once
set and connected, the slave units will operate in unison with the master unit.
Configure the units as indicated below.
Slave units:
1. Press <MENU> repeatedly until any DMX personality shows on the display.
2. Press <ENTER> to accept.
3. Set the DMX address to d 1.
4.
5.
Connect the DMX input of the first slave unit to the DMX output of the master unit.
Connect the DMX input of the subsequent slave units to the DMX output of the
previous slave unit.
6. Finish setting and connecting all the slave units.
Master unit:
1.
2.
Set the master unit to operate in either Automatic or Sound-Active mode.
Make the master unit the first unit in the DMX daisy chain.
·
Configure all the slave units before connecting the master unit to the DMX
daisy chain.
·
Never connect a DMX controller to a DMX string configured for Master/Slave
operation because the controller may interfere with the signals from the
master unit.
·
Do not connect more than 31 slave units to the master unit.
SlimPAR™ QUAD 3 IRC User Manual
Page 15 of 19
5. TECHNICAL INFORMATION
Product
Maintenance
Dust build-up reduces light output performance and can cause overheating. This can
lead to reduction of the light source’s life and mechanical wear. To maintain optimum
performance and minimize wear, clean the product at least twice a month. However,
usage and environmental conditions contribute to increased cleaning frequency.
To clean the product, follow the instructions below:
·
Unplug the product from power.
·
Wait until the product is at room temperature.
·
Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on
the external surface/vents.
·
Clean all external optics and glass/transparent surfaces with a mild soap solution,
ammonia-free glass cleaner, or isopropyl alcohol.
·
Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue.
·
Softly wipe any dirt or grime to the outside edges of the external optics or
glass/transparent surface.
·
Gently polish the external optics and glass/transparent surfaces until they are free of
haze and lint.
Always dry the external optics and glass/transparent surfaces carefully after
cleaning them.
Page 16 of 19
SlimPAR™ QUAD 3 IRC User Manual Rev. 2
6. TECHNICAL SPECIFICATIONS
Dimensions and
Weight
Length
Width
Height
Weight
8.3 in (210 mm)
7.4 in (187 mm)
4.3 in (108 mm)
3.6 lb (1.7 kg)
Note: Dimensions in inches rounded to the nearest decimal digit.
Power
Power Supply Type
Range
Voltage Selection
Switching (internal)
100–240 VAC, 50/60 Hz
Auto-ranging
Parameter
120 VAC, 60 Hz
230 VAC, 50 Hz
Consumption
44 W
46 W
Operating current
0.4 A
0.2 A
Power linking current (units)
8 A (21 units)
8 A (39 units)
Fuse
F 1 A, 250 V
F 1 A, 250 V
Power I/O
US/Canada
UK/Worldwide
IEC
Power input connector
IEC
Power output connector
Edison
IEC
Power Cord plug
Edison (US)
Local plug
Type
Power
Lifespan
LED
5W
50,000 hours
Color
Quantity
Current
Quad-color (RGBA)
3
Light Source
Parameter
Photo Optic
Thermal
2 A
Illuminance @ 2 m
1065 lux
Beam angle
20°
Field angle
34°
Strobe rate
0–17 Hz
Maximum External Temp.
Cooling System
104 °F (40 °C)
Convection
I/O Connectors
Connector Type
Channel Range
3-pin XLR
Sockets
4, 9
Product Name
Item Code
UPC Number
SlimPAR™ QUAD 3 IRC
03030738
781462210861
DMX
Ordering
SlimPAR™ QUAD 3 IRC User Manual
Page 17 of 19
To return a product or request support:
·
·
·
·
In the U.S., contact CHAUVET® World Headquarters (see below).
In the UK or Ireland, contact CHAUVET® Europe Ltd. (see below).
In Mexico, contact CHAUVET® Mexico (see below).
In any other country, DO NOT contact CHAUVET®. Contact your distributor. See
www.chauvetlighting.com for distributors outside the U.S., United Kingdom, Ireland,
or Mexico.
If you live outside the U.S., United Kingdom, Ireland, or Mexico, contact your
distributor of record and follow their instructions on how to return CHAUVET®
products to them. Visit our website for contact details.
Returns
Call the corresponding CHAUVET® Technical Support office and request a Return
Merchandise Authorization (RMA) number before shipping the product. Be prepared to
provide the model number, serial number, and a brief description of the cause for the
return.
You must send the merchandise prepaid, in its original box, and with its original packing
and accessories. CHAUVET® will not issue call tags.
Clearly label the package with the RMA number. CHAUVET® will refuse any product
returned without an RMA number.
Write the RMA number on a properly affixed label. DO NOT write the RMA number
directly on the box.
Before sending the product, clearly write the following information on a piece of paper
and place it inside the box:
·
Your name
·
Your address
·
Your phone number
·
RMA number
·
A brief description of the problem
Be sure to pack the product properly. Any shipping damage resulting from inadequate
packaging will be your responsibility. FedEx packing or double-boxing are
recommended.
CHAUVET® reserves the right to use its own discretion to repair or replace
returned product(s).
Page 18 of 19
SlimPAR™ QUAD 3 IRC User Manual Rev. 2
CONTACT
US
WORLD HEADQUARTERS - CHAUVET®
General Information
Address:5200 NW 108th Avenue
Sunrise, FL 33351
Voice: (954) 577-4455
Fax:
(954) 929-5560
Toll free: (800) 762-1084
Technical Support
Voice: (954) 577-4455 (Press 4)
Fax:
(954) 756-8015
Email: tech@chauvetlighting.com
World Wide Web
www.chauvetlighting.com
UNITED KINGDOM AND IRELAND - CHAUVET® Europe Ltd.
General Information
Address:Unit 1C
Brookhill Road Industrial Estate
Pinxton, Nottingham, UK
NG16 6NT
Voice: +44 (0)1773 511115
Fax:
+44 (0)1773 511110
MEXICO - CHAUVET® Mexico
General Information
Address:Av. Santa Ana 30
Parque Industrial Lerma
Lerma, Mexico C.P. 52000
Voice: +52 (728) 285-5000
Technical Support
Email: uktech@chauvetlighting.com
World Wide Web
www.chauvetlighting.co.uk
Technical Support
Email: servicio@chauvet.com.mx
World Wide Web
www.chauvet.com.mx
Outside the U.S., United Kingdom, Ireland, or Mexico, contact your dealer. Follow their instructions to request
support or to return a product. Visit our website for contact details.
SlimPAR™ QUAD 3 IRC User Manual5HY
Page 19 of 19