Alpine Navigation Radio Owner`s manual

INA-W910R
Owner’s Manual
Navigation Software for INA-W910R
UK English
February 2011, Version 1.0
Thank you for choosing the Alpine INA-W910R as your navigator. Start using your device
right away. This document is the detailed description of the navigation software. You can
easily discover the software while you are using it; however, we still recommend that you read
this manual to fully understand the screens and features.
INA-W910R Navigation Software Owner’s Manual
2
Table of contents
1 Warnings and Safety information .......................................................... 6
2 Getting started.......................................................................................... 7
2.1 Navigation menu .............................................................................................8
2.2 Buttons and other controls on the screen........................................................9
2.2.1 Using keyboards ................................................................................................10
2.2.2 Beyond single screen tap ...................................................................................11
2.3 Map screen....................................................................................................12
2.3.1 Navigating on the map .......................................................................................12
2.3.2 Position markers ................................................................................................13
2.3.2.1 Vehimarker and Lock-on-Road ................................................................................13
2.3.2.2 Selected map location (Cursor) and selected map object ........................................14
2.3.3 Objects on the map ............................................................................................14
2.3.3.1 Streets and roads .....................................................................................................14
2.3.3.2 Turn preview and Next street ...................................................................................14
2.3.3.3 Lane information and Signposts...............................................................................15
2.3.3.4 Junction view ...........................................................................................................16
2.3.3.5 3D object types.........................................................................................................16
2.3.3.6 Elements of the active route .....................................................................................16
2.3.3.7 Traffic events............................................................................................................17
2.3.4 Manipulating the map ........................................................................................18
2.3.5 Quick menu........................................................................................................19
2.3.6 Checking the details of the current position (Where Am I?) .............................21
3 Navigating ............................................................................................... 23
3.1 Selecting the destination of a route...............................................................23
3.1.1 Entering an address or a part of the address.......................................................23
3.1.1.1 Entering an address .................................................................................................24
3.1.1.2 Entering the midpoint of a street as the destination.................................................26
3.1.1.3 Selecting an intersection as the destination .............................................................27
3.1.1.4 Selecting a city/town centre as the destination.........................................................29
3.1.1.5 Entering an address with a postal code ...................................................................30
3.1.1.6 Tips on entering addresses quickly ..........................................................................32
3.1.2 Selecting the destination from the Places of Interest .........................................32
3.1.2.1 Quick search for a Place of Interest.........................................................................33
3.1.2.2 Searching for a Place of Interest using preset categories........................................34
3.1.2.3 Searching for a Place of Interest by category ..........................................................36
3.1.2.4 Searching for a Place of Interest by name ...............................................................38
3.1.2.5 Selecting nearby assistance from 'Where Am I?'......................................................41
3.1.3 Selecting a map location as the destination........................................................42
3.1.4 Selecting the destination from your Favourites .................................................43
3.1.5 Selecting one of the most likely destinations (Smart History)...........................44
INA-W910R Navigation Software Owner’s Manual
3
3.1.6 Selecting a recent destination from the History .................................................45
3.1.7 Entering the coordinate of the destination .........................................................46
3.1.8 Navigate to a location stored in a picture...........................................................47
3.1.9 Building a route from the list of destinations (Create Route) ............................48
3.2 Viewing the entire route on the map .............................................................49
3.3 Checking route parameters and accessing route related functions ..............49
3.4 Modifying the route.......................................................................................50
3.4.1 Selecting a new destination when already having a route: New Route,
Waypoint or Final Destination....................................................................................50
3.4.2 Setting a new starting position for the route ......................................................51
3.4.3 Editing the list of destinations (Edit Route) .......................................................53
3.4.4 Pausing the active route .....................................................................................53
3.4.5 Cancelling the active route.................................................................................54
3.4.6 Checking route alternatives when planning the route ........................................54
3.4.7 Checking route alternatives for an existing route ..............................................55
3.4.8 Changing the vehicle used in route planning .....................................................56
3.4.9 Changing the road types used in route planning ................................................57
3.5 Saving a location as a Favourite destination................................................58
3.6 Watching the simulation of the route ............................................................58
4 Reference Guide ..................................................................................... 60
4.1 Concepts........................................................................................................60
4.1.1 Smart Zoom .......................................................................................................60
4.1.2 Daytime and night colour themes ......................................................................60
4.1.3 Route calculation and recalculation ...................................................................60
4.1.4 Green routing .....................................................................................................62
4.1.5 Road safety cameras and other proximity alert points .......................................63
4.1.6 Speed limit warning ...........................................................................................63
4.1.7 Traffic information in route planning ................................................................63
4.1.7.1 Historical traffic ......................................................................................................64
4.1.7.2 Real-time traffic information (TMC)........................................................................64
4.2 'More' menu...................................................................................................65
INA-W910R Navigation Software Owner’s Manual
4
4.3 Settings menu ................................................................................................67
4.3.1 Sound and Warnings..........................................................................................68
4.3.2 Customise Quick menu ......................................................................................70
4.3.3 Traffic settings ...................................................................................................70
4.3.4 Route settings.....................................................................................................71
4.3.5 Green routing settings ........................................................................................73
4.3.6 Map settings.......................................................................................................74
4.3.7 Visual guidance settings ....................................................................................75
4.3.8 Display settings..................................................................................................76
4.3.9 Regional settings................................................................................................76
4.3.10 Trip monitor settings........................................................................................76
4.4 Trip monitor ..................................................................................................77
4.5 ActiveWindow ...............................................................................................77
5 Glossary................................................................................................... 78
6 Copyright note........................................................................................ 80
INA-W910R Navigation Software Owner’s Manual
5
1 Warnings and Safety information
The navigation system helps you find your way to your destination with a connected GPS
receiver. The software does not transmit your GPS position; others cannot track you.
It is important that you look at the display only when it is safe to do so. If you are the driver of
the vehicle, we recommend that you operate your software before you start your journey. Plan
the route before your departure and stop if you need to change the route.
You must obey the traffic signs and follow the road geometry. If you deviate from the
recommended route, your software changes the instructions accordingly.
INA-W910R Navigation Software Owner’s Manual
6
2 Getting started
When using the navigation software for the first time, an initial setup process starts
automatically. Do as follows:
1.
Select the written language of the application interface. Later you can change it in
Regional settings (page 76).
2.
Read the End User Licence Agreement. Tap
3.
The Configuration wizard starts. Tap
4.
Select the language and speaker used for voice guidance messages. Later you can
change it in Sound and Warnings settings (page 76).
5.
If needed, modify the time format and unit settings. Later you can change them in
Regional settings (page 76).
6.
If needed, modify the default route planning options. Later you can change them in
Route settings (page 71).
INA-W910R Navigation Software Owner’s Manual
to continue.
to continue.
7
7.
The initial setup is now complete. The Configuration wizard can be restarted later from
the Settings menu (page 67).
After the initial setup, the Navigation menu appears and you can start using the software.
2.1 Navigation menu
You can reach all parts of the software from the Navigation menu.
You have the following options:
•
Tap
to select your destination by entering an address or selecting a place of
interest, a location on the map or one of your Favourite destinations. You can also look
up your recent destinations from the Smart History, enter a coordinate or use the
location saved in a photo.
•
Tap
to display the route parameters and the route in its full length on the map.
You can also perform route-related actions such as editing or cancelling your route,
setting a start point for the route, picking route alternatives, avoiding parts of the route,
simulating navigation or adding the destination to your Favourites.
•
Tap
to customise the way the navigation software works.
•
Tap
to open the trip computer and trip logging system.
•
Tap
applications.
•
Press the MAP hardware button to start navigating on the map.
to simulate demo routes or to run some additional
INA-W910R Navigation Software Owner’s Manual
8
2.2 Buttons and other controls on the screen
When you are using the software, you usually tap buttons on the touch screen.
You only need to confirm selections or changes if the application needs to restart, it needs to
perform a major reconfiguration, or you are about to lose some of your data or settings.
Otherwise, the software saves your selections and applies the new settings without
confirmation as soon as you use the controls.
Type
Example
Description
How to use it
Button
Tap it to initiate a function, Tap it once.
to open a new screen, or to
set a parameter.
Button
with
value
Some buttons display the
Tap it once.
current value of a field or
setting. Tap the button to
change the value. After the
change, the new value is
shown on the button.
Icon
List
Shows status information.
When you need to select
from several options, they
appear in a list.
Some icons also function
as a button. Tap them
once.
Grab the list anywhere
and slide your finger up
or down. Depending on
the speed of the sliding,
the list will scroll fast or
slow, only a bit or till the
end.
Alternatively, move
between pages with the
and
buttons
and tap the value that
you want.
Radio
button
When there are only a few Tap one of the buttons to
choices, radio buttons may select a new value.
be used instead of lists.
Only one value can be
selected.
Switch
When there are only two
choices, a checkmark
shows whether the feature
is enabled.
INA-W910R Navigation Software Owner’s Manual
Tap it to turn the switch
on or off.
9
Slider
When a feature can be set
to different values in a
range, the software shows
an indicator on a gauge
that displays and sets the
value.
•
Drag the handle to
move the slider to
its new position.
•
Tap the slider
where you want
the handle to
appear; the thumb
jumps there.
Each key is a touch
Alphabetic and
screen button.
alphanumeric keyboards to
enter text and numbers.
Virtual
keyboard
2.2.1 Using keyboards
You only need to enter letters or numbers when you cannot avoid it. You can type with your
fingertips on the full-screen keyboards and you can switch between various keyboard layouts,
for example English, Greek or numerical.
Task
Switching to another keyboard layout, for
example from an English keyboard to a
Greek keyboard
Instruction
Tap the
button and select
the new keyboard layout from the list.
Correcting your entry on the keyboard
Tap
to remove the unneeded character(s).
Tap and hold the button to delete several
characters or the entire input string.
Entering a space, for example between a
first name and a family name or in multiword street names
Tap the
screen.
button at the bottom centre of the
Entering symbols
Tap
to switch to a keyboard offering
numeric and symbol characters.
Finalising the keyboard entry (accepting
the suggested search result)
Tap
.
Finalising the keyboard entry (opening the
list of search results)
Tap
.
Tap
.
Finalising the keyboard entry (saving your
input)
INA-W910R Navigation Software Owner’s Manual
10
Cancelling the keyboard entry (returning
to the previous screen)
Tap
.
2.2.2 Beyond single screen tap
You usually need to tap the screen only once. However, some useful features can be
accessed with combined touch screen tapping. Those are the following:
Action
Tapping and holding
the screen
Details
Tap and keep pressing the following buttons to reach extra functions:
•
Tap and hold
the Map screen appears.
•
Tap and hold any of the
on list and menu screens:
,
,
,
,
, and
buttons on the Map screen: you can rotate, tilt or scale
the map continuously.
Gestures
(drag&drop)
•
Tap and hold
on keyboard screens: you can delete
several characters quickly.
•
Tap and hold
continuously.
or
in long lists: you can scroll pages
You need to drag and drop the screen only in cases like:
•
Moving the handle on a slider.
•
Scrolling the list: grab the list anywhere and slide your finger up
or down. Depending on the speed of the sliding, the list will
scroll fast or slow, only a bit or till the end.
•
Moving the map in map browsing mode: grab the map, and
move it in the desired direction.
INA-W910R Navigation Software Owner’s Manual
11
2.3 Map screen
2.3.1 Navigating on the map
The Map screen is the most frequently used screen of the software.
It shows the current position (the Vehimarker, a blue arrow by default), the recommended
route (an orange line), and the surrounding map area.
When there is no GPS position, the Vehimarker is transparent. It shows your last known
position.
You see coloured dots circling around a satellite symbol in the top left corner. The more green
dots you see, the closer you are to get the valid GPS position.
When GPS position is available, the Vehimarker is displayed in full colour, now showing your
current position.
There are screen buttons and data fields on the screen to help you navigate. During
navigation, the screen shows route information.
Three data field are displayed in the bottom left corner.
The data fields are different when you are navigating an active route and when you have no
specified destination (the orange line is not displayed).
INA-W910R Navigation Software Owner’s Manual
12
Default data fields when cruising without a destination (tap any of the fields to change its
value):
Field
Description
Shows your current speed given by the GPS receiver.
Shows the speed limit of the current road if the map contains it.
Shows the current time corrected with time zone offset. The accurate
time comes from the GPS satellites, and the time zone information
comes from the map or it can be set manually in Regional settings.
Default data fields when navigating a route (tap and hold any of the fields to change its value):
Field
Description
Shows the distance you need to travel on the route before reaching
your final destination.
Shows the time needed to reach the final destination of the route
based on information available for the remaining segments of the
route.
If your device is capable of receiving live traffic information, the
calculation takes into account traffic delays affecting your route if they
are received. However, this calculation is rarely accurate.
Historical traffic data can also be taken into account if data is
available.
Shows the estimated arrival time at the final destination of the route
based on information available for the remaining segments of the
route.
If your device is capable of receiving live traffic information, the
calculation takes into account traffic delays affecting your route if they
are received. However, this calculation is rarely accurate.
Historical traffic data can also be taken into account if data is
available.
2.3.2 Position markers
2.3.2.1 Vehimarker and Lock-on-Road
When your GPS position is available, the software marks your current position with the
Vehimarker. By default, this marker is a blue arrow, but you can change this icon in Settings.
The Vehimarker may not show your exact GPS position and heading. If roads are near, it is
aligned to the nearest road to suppress GPS position errors, and the direction of the icon is
aligned to the direction of the road.
INA-W910R Navigation Software Owner’s Manual
13
2.3.2.2 Selected map location (Cursor) and selected map object
You can mark a map location in the following ways:
•
Tap the map when navigating,
•
Tap the map when you are asked to confirm the destination at the end of a search, or
•
Tap the map in Find on Map (page 42)
When a map location is selected, the Cursor appears at the selected point on the map. The
Cursor is displayed with a radiating red dot (
) to make it visible at all zoom levels.
The location of the Cursor can be used as the destination of the route, you can search for
Places around it, or you can save this location as one of your Favourite destinations.
You can also select some of the objects on the map. If you tap the map at the icon of a Place
of Interest, the Place will be selected (you see a red circling border around the object), and
you can get information about this object or use it as a route point.
2.3.3 Objects on the map
2.3.3.1 Streets and roads
The software shows the streets in a way that is similar to how the paper road maps show
them. Their width and colours correspond to their importance: you can easily tell a motorway
from a small street.
2.3.3.2 Turn preview and Next street
When navigating a route, the top section of the Map screen shows information about the next
route event (manoeuvre) and the next street or the next city/town.
There is a field in the top left corner that displays the next manoeuvre. Both the type of the
event (turn, roundabout, exiting motorway, etc.) and its distance from the current position are
displayed.
Most of these icons are very intuitive. The following table lists some of the frequently shown
route events.
Icon
Description
Turn left.
Turn right.
Turn back.
INA-W910R Navigation Software Owner’s Manual
14
Bear right.
Turn sharp left.
Keep left.
Continue straight in the intersection.
Go left on the roundabout, 3rd exit.
Enter motorway.
Exit motorway.
Board ferry.
Leave ferry.
Approaching a waypoint.
Approaching the destination.
2.3.3.3 Lane information and Signposts
When navigating on multilane roads, it is important to take the appropriate lane in order to
follow the recommended route. If lane information is available in the map data, the software
displays the lanes and their directions using small arrows at the top of the map. Highlighted
arrows represent the lanes you need to take.
Where additional information is available, signposts substitute arrows. Signposts are
displayed at the top of the map. The colour and style of the signposts are similar to the real
ones you can see above road or by the roadside. They show the available destinations and
the number of the road the lane leads to.
All signposts look similar when cruising (when there is no recommended route). When
navigating a route, only the signpost that points to the lane(s) to be taken is displayed in vivid
colours; all others are darker.
If you want to hide the currently displayed signposts, tap any of them and the normal Map
screen returns until new signpost information is received.
INA-W910R Navigation Software Owner’s Manual
15
2.3.3.4 Junction view
If you are approaching a motorway exit or a complex intersection and the needed information
exists, the map is replaced with a 3D view of the junction. The lanes you need to take are
displayed with arrows. Signposts can also be present if information is available.
If you want to hide the currently displayed junction, tap the picture and the Map screen
returns.
2.3.3.5 3D object types
Your software supports the following 3D object types:
Type
Description
3D terrain
3D terrain map data shows changes in terrain, elevations or depressions in
the land when you view the map in 2D, and use it to plot the route map in
3D when you navigate. Hills and mountains are shown in the background of
the 3D map, and illustrated by colour and shading on the 2D map.
Elevated roads
3D landmarks
3D buildings
Complex intersections and vertically isolated roads (such as overpasses or
bridges) are displayed in 3D.
Landmarks are 3D artistic or block representations of prominent or wellknown objects.
3D block representation of full city building data containing actual building
size and position on the map.
2.3.3.6 Elements of the active route
Your software shows the route in the following way:
Symbol
Name
Current GPS position and
Start point
Description
Your current position displayed on the map. If
roads are near, it is aligned to the nearest road.
Normally if GPS position is available, the route
starts from the current position. If there is no valid
GPS position, your software uses the last known
position as the start point.
Waypoint (intermediate
destination)
Destination (end point)
An intermediate destination of the route before
reaching the final destination.
The final destination of the route.
INA-W910R Navigation Software Owner’s Manual
16
Route colour
The route always stands out with its colour on the
map, both in daytime and in night colour mode.
Streets and roads that are
You can choose whether you want to use or
excluded from the navigation avoid certain road types (page 71). However,
when your software cannot avoid such roads, the
route will include them and it will show them in a
colour that is different from the route colour.
Streets and roads that are
affected by traffic events
Road segments may be affected by traffic events
received. These streets and roads are displayed
in an alternate colour, and small symbols
displayed along the route show the type of the
traffic event.
2.3.3.7 Traffic events
Road segments affected by traffic events are displayed with an alternate colour on the map,
and small symbols above the road show the nature of the event:
Tap
to open the list of traffic event categories:
In the first column you can see the number of traffic events on your route. The second column
contains the full count of traffic events in the categories.
Tap any of the even types to list the event in that category or select the top row to open the
list of all traffic events:
Now tap any of the list items to see its details, and to display the affected road segment in its
full length on the map:
INA-W910R Navigation Software Owner’s Manual
17
2.3.4 Manipulating the map
Tap the map anywhere to browse it during navigation. The map stops following the current
position (the Vehimarker, a blue arrow by default, is not locked in a fix position on the screen
any more) and control buttons appear to help you modify the map view.
Action
Moving the map
with drag&drop
Button(s)
No buttons
Zooming in and out
,
Description
You can move the map in any direction: tap
and hold the map, and move your finger
towards the direction you want to move the
map.
Changes how much of the map is displayed on
the screen.
Your software uses high-quality vector maps
that let you examine the map at various zoom
levels, always with optimised content. It always
displays street names and other text with the
same font size, never upside-down, and you
only see the streets and objects that you need.
Map scaling has a limit in 3D map view mode.
If you zoom out further, the map switches to
2D view mode.
Tap the button once to modify the view in large
steps, or tap and hold the button to modify it
continuously and smoothly.
Tilting up and down
,
Changes the vertical view angle of the map in
3D mode.
Tap the button once to modify the view in large
steps, or tap and hold the button to modify it
continuously and smoothly.
INA-W910R Navigation Software Owner’s Manual
18
Rotating left and
right
Changes the horizontal view angle of the map.
,
Compass
,
Full route
Location
information
Return to normal
navigation
Tap the button once to modify the view in large
steps, or tap and hold the button to modify it
continuously and smoothly.
Tap this button to switch between the 3D
perspective and 2D top-down map view
modes.
Tap this button in 2D view mode to show the
entire route on the map.
Tap this button to open a new screen with
information about the selected map point, the
Cursor.
Tap this button to move the map back to follow
the current GPS position. Automatic map
rotation is also re-enabled.
The map manipulation buttons disappear and
navigation continues.
Additional options
Select destination
Tap this button to open a list of additional
features like saving the Cursor as a Favourite
destination, or searching for Places around the
Cursor.
Tap this button to select the Cursor as a new
destination. The route is automatically
calculated.
2.3.5 Quick menu
The Quick menu is a selection of controls and functions that are frequently needed during
navigation. It can be opened directly from the Map screen by tapping
The menu will close after a few seconds of inactivity or if you tap
.
.
Most of these functions are shortcuts. They are accessible from the menu system.
There are more functions available than the number of buttons in the menu. In Settings, you
can choose the function of each button (page 70). The following options are available:
INA-W910R Navigation Software Owner’s Manual
19
Button
Description
Shortcut for
Find / Find Places /
This function lets you search for a Place along your route
Quick Search (page
or around your current location if there is no route
33)
calculated.
This button opens the list of your Favourite destinations.
Find / Favourite
(page 43)
Find / History (page
This button opens the History list. You can select one of
45)
your previous destinations.
This button opens the route editing function.
This button opens the route related settings.
This button opens the map related settings.
My Route / Edit
Route
More / Settings /
Route Settings
(page 71)
More / Settings /
Map Settings (page
74)
Tap the Current
This button opens a special screen with information about
Street field on the
the current position and a button to search for nearby
Map screen
emergency or roadside assistance. For details, see the
next chapter.
My Route / Cancel
This button cancels the route and stops navigation. The
button is replaced with the next one if waypoints are given. Route (page 54)
This button skips the next waypoint from the route.
n/a
My Route /
This button opens a 2D map scaled and positioned to
Overview (page 49)
show the entire route.
This button opens the Visual Guidance settings screen.
This button opens the list of traffic event types.
INA-W910R Navigation Software Owner’s Manual
More / Settings /
Visual Guidance
(page 75)
Tap the Traffic icon
on the Map screen
20
My Route /
This button lets you bypass parts of the recommended
Avoidances
route.
More / Trip Monitor
This button opens the Trip Monitor screen where you can
(page 65)
manage your previously saved trip logs and track logs.
This button opens the list of manoeuvres (the itinerary).
Tap the top of the
Map screen during
navigation.
My Route / More /
With this function you can save the active route for later
Save Route
use.
My Route / More /
With this function you can replace the active route with a
Load Route
previously saved route.
Find / Find Places
With this function you can search for Places of Interest in
(page 32)
various different ways.
My Route / More /
This button opens the Map screen and starts simulating
Simulate Navigation
the active route.
(page 58)
Tap the top of the
This button opens the GPS Information screen with
Map screen when
satellite position and signal strength information.
there is no GPS
reception
2.3.6 Checking the details of the current position (Where Am I?)
This screen contains information about the current position (or about the last known position if
GPS reception is not available) and a button to search for useful Places nearby.
.
You can access this screen from the map in one of the following ways:
•
If the current street is displayed below the Vehimarker (the current position on the
map), tap it to open the Where Am I? screen.
INA-W910R Navigation Software Owner’s Manual
21
•
Open the Quick menu and tap the
button.
Information on this screen:
•
,
format).
•
: Altitude (elevation information coming from the GPS receiver - often
inaccurate).
•
Address details (when available) of the current position are also displayed at the
bottom.
: Latitude and Longitude (coordinate of the current position in WGS84
You can also perform some actions on this screen:
Tap
to save the current position as a Favourite destination.
You can also search for assistance near your current position. Tap
open a new screen for the Quick search:
to
The following services can be searched around the current position or the last known position:
•
: Car repair and roadside assistance services
•
: Medical and emergency services
•
: Police stations
•
: Petrol stations
Tap any of the buttons, select a Place from the list, and navigate to it.
INA-W910R Navigation Software Owner’s Manual
22
3 Navigating
You can set up your route in different ways:
•
If you need a route for immediate navigation, you can select the destination and start
navigating to it right away (normal navigation).
•
You can also plan a route independently of your current GPS position or even without
GPS reception (to achieve this, you need to turn off the GPS receiver and set a new
starting point in My Route / Edit Route by tapping the flag icon at the current position).
You can plan routes with multiple destinations. Select the first destination. Then select a
second destination and add it to your route to create a multi-point route. You can add as
many destinations to your route as you like.
3.1 Selecting the destination of a route
The software offers you several ways of choosing your destination:
•
Enter a full address or a part of an address, for example a street name without a house
number or the names of two intersecting streets (page 23).
•
Enter an address with postal code (page 30). This way you do not need to select the
name of the city/town and the search for street names might be faster as well.
•
Use a built-in Place of Interest as your destination (page 32).
•
Select a location on the map with the Find on Map feature (page 42).
•
Use a previously saved Favourite destination (page 43).
•
Select a location from the History of previously used destinations (page 45).
•
Enter the coordinate of the destination (page 46).
•
Use the location where a photo was taken (page 47).
3.1.1 Entering an address or a part of the address
If you know at least a part of the address, it is the quickest way to select the destination of the
route.
Using the same screen, you can find an address by entering:
•
the exact address, including house number
•
the centre of a city/town
•
an intersection
•
the midpoint of a street
•
any of the above, starting the search with the postal code (page 30)
INA-W910R Navigation Software Owner’s Manual
23
3.1.1.1 Entering an address
To enter an address as the destination, do as follows:
1.
If you are on the Map screen, press Navi Menu to return to the Navigation menu.
2.
In the Navigation menu, tap the following buttons:
3.
By default, the software proposes the country and city/town where you are. If needed,
,
.
tap
, enter the first few letters of the country name on the
keyboard, and select one country from the list of results.
4.
If needed, select a new city/town:
a.
Tap
b.
Start entering the name of the city/town on the keyboard.
c.
Find the city/town you need:
•
.
The most likely city/town name is always shown in the input field. To
accept it, tap
•
.
If the desired name does not show up, the names that match the string
appear in a list after entering a couple of characters (to open the list of
results before it appears automatically, tap
the city/town from the list.
5.
). Select
Enter the street name:
a.
Tap
needed).
(if you have selected a city/town above, this step is not
b.
Start entering the street name on the keyboard.
c.
Find the street you need:
INA-W910R Navigation Software Owner’s Manual
24
•
The most likely street name is always shown in the input field. To accept
.
it, tap
•
If the desired name does not show up, the names that match the string
appear in a list after entering a couple of characters (to open the list of
results before it appears automatically, tap
the street from the list.
6.
7.
). Select
Enter the house number:
a.
Enter the house number on the keyboard. (To enter symbols, tap
).
b.
Tap
to finish entering the address. (If the entered house
number cannot be found, the midpoint of the street is selected as the
destination.)
A full screen map appears with the selected point in the middle. If necessary, tap the
map somewhere else to modify the destination. The Cursor (
new location. Tap
) appears at the
to confirm the destination, or tap
to select a different destination.
8.
After a short summary of the route parameters, the map appears showing the entire
route. The route is automatically calculated. Tap
parameters, or tap
to modify route
and start your journey.
INA-W910R Navigation Software Owner’s Manual
25
Tip!
If you know that you will use this destination frequently, before tapping
to confirm the destination, put it on the list of your
Favourites first: tap
then
, give a
name for the new Favourite, and tap
to save the location.
The map with the destination returns automatically. Now you can start your
journey.
3.1.1.2 Entering the midpoint of a street as the destination
You can navigate to the midpoint of a street if the house number is not available:
1.
If you are on the Map screen, press Navi Menu to return to the Navigation menu.
2.
In the Navigation menu, tap the following buttons:
3.
If necessary, modify the country and city/town as described earlier (page 24).
4.
Enter the street name:
a.
Tap
needed).
b.
Start entering the street name on the keyboard.
c.
Find the street you need:
•
.
(if you have selected a city/town above, this step is not
The most likely street name is always shown in the input field. To accept
it, tap
•
,
.
If the desired name does not show up, the names that match the string
appear in a list after entering a couple of characters (to open the list of
results before it appears automatically, tap
the street from the list.
INA-W910R Navigation Software Owner’s Manual
). Select
26
5.
Instead of entering the house number, tap the input field above. The midpoint of the
street is selected as the destination.
6.
A full screen map appears with the selected point in the middle. If necessary, tap the
map somewhere else to modify the destination. The Cursor (
new location. Tap
) appears at the
to confirm the destination, or tap
to select a different destination.
7.
After a short summary of the route parameters, the map appears showing the entire
route. The route is automatically calculated. Tap
parameters, or tap
to modify route
and start your journey.
3.1.1.3 Selecting an intersection as the destination
To enter an address as the destination, do as follows:
1.
If you are on the Map screen, press Navi Menu to return to the Navigation menu.
2.
In the Navigation menu, tap the following buttons:
3.
If necessary, modify the country and city/town as described earlier (page 24).
4.
Enter the street name:
a.
Tap
needed).
b.
Start entering the street name on the keyboard.
c.
Find the street you need:
•
,
.
(if you have selected a city/town above, this step is not
The most likely street name is always shown in the input field. To accept
it, tap
.
INA-W910R Navigation Software Owner’s Manual
27
•
If the desired name does not show up, the names that match the string
appear in a list after entering a couple of characters (to open the list of
). Select
results before it appears automatically, tap
the street from the list.
. The midpoint of the
5.
Instead of entering the house number, tap
street is selected as the destination.
6.
A full screen map appears with the selected point in the middle. If necessary, tap the
map somewhere else to modify the destination. The Cursor (
new location. Tap
) appears at the
to confirm the destination, or tap
to select a different destination.
7.
After a short summary of the route parameters, the map appears showing the entire
route. The route is automatically calculated. Tap
parameters, or tap
to modify route
and start your journey.
INA-W910R Navigation Software Owner’s Manual
28
3.1.1.4 Selecting a city/town centre as the destination
The city/town centre is not the geometric centre of the city/town but an arbitrary point the map
creators have chosen. In towns and villages, it is usually the most important intersection; in
larger cities, it is one of the important intersections.
1.
If you are on the Map screen, press Navi Menu to return to the Navigation menu.
2.
In the Navigation menu, tap the following buttons:
3.
If necessary, modify the country as described earlier (page 24).
4.
Select the destination city/town:
,
a.
Tap
b.
Start entering the name of the city/town on the keyboard.
c.
Find the city/town you need:
•
.
The most likely city/town name is always shown in the input field. To
accept it, tap
•
.
.
If the desired name does not show up, the names that match the string
appear in a list after entering a couple of characters (to open the list of
results before it appears automatically, tap
the city/town from the list.
). Select
5.
Instead of entering the street name, tap
. This way the centre of
the displayed city/town becomes the destination of the route.
6.
A full screen map appears with the selected point in the middle. If necessary, tap the
map somewhere else to modify the destination. The Cursor (
INA-W910R Navigation Software Owner’s Manual
) appears at the
29
new location. Tap
to confirm the destination, or tap
to select a different destination.
7.
After a short summary of the route parameters, the map appears showing the entire
route. The route is automatically calculated. Tap
to modify route
and start your journey.
parameters, or tap
3.1.1.5 Entering an address with a postal code
All of the above address searching possibilities can be performed with entering the postal
code instead of the city/town name. Find below an example with a full address:
1.
If you are on the Map screen, press Navi Menu to return to the Navigation menu.
2.
In the Navigation menu, tap the following buttons:
3.
If necessary, modify the country as described earlier (page 24).
4.
Enter a new city/town using its postal code:
a.
Tap
b.
Start entering the postal code.
c.
Find the city/town you need:
•
.
.
The most likely postal code is always shown in the input field. To accept
it, tap
•
,
.
If the desired number does not show up, open the list of results by
tapping
. Select the postal code from the list.
INA-W910R Navigation Software Owner’s Manual
30
5.
Enter the street name:
a.
Tap
b.
Start entering the street name on the keyboard.
c.
Find the street you need:
•
.
The most likely street name is always shown in the input field. To accept
it, tap
•
.
If the desired name does not show up, the names that match the string
appear in a list after entering a couple of characters (to open the list of
). Select
results before it appears automatically, tap
the street from the list.
6.
7.
Enter the house number:
a.
Enter the house number on the keyboard. (To enter symbols, tap
b.
Tap
to finish entering the address. (If the entered house
number cannot be found, the midpoint of the street is selected as the
destination.)
).
A full screen map appears with the selected point in the middle. If necessary, tap the
map somewhere else to modify the destination. The Cursor (
new location. Tap
) appears at the
to confirm the destination, or tap
to select a different destination.
8.
After a short summary of the route parameters, the map appears showing the entire
route. The route is automatically calculated. Tap
parameters, or tap
to modify route
and start your journey.
INA-W910R Navigation Software Owner’s Manual
31
3.1.1.6 Tips on entering addresses quickly
•
When you are entering the name of a city/town or a street:
•
Only those letters are offered on the keyboard that appear in possible search
results. All other characters are greyed out.
•
As you are typing, the most likely result is always displayed in the input field. If
the guess is correct, tap
•
•
to select it.
After entering a couple of letters, tap
contain the specified letters.
to list the items that
You can speed up finding an intersection:
•
Search first for the street with a less common or less usual name; fewer letters
are enough to find it.
•
If one of the streets is shorter, search for that one first. You can then find the
second one faster.
•
You can search for both the type and the name of a road. If the same word appears in
several names, for example in the name of streets, roads and avenues, you can obtain
the result faster if you enter the first letter of the street type: For example, enter 'PI A' to
obtain Pine Avenue and skip all Pine Streets and Pickwick Roads.
•
You can also search in postal codes. As postal codes consist of only a few characters,
this is usually faster than entering the name of the city/town.
3.1.2 Selecting the destination from the Places of Interest
You can select your destination from the Places of Interest included with your software.
Using the same screen, you can find a Place in different ways:
•
with the Quick search feature, you can quickly find a nearby Place by its name
•
with the Preset search feature, you can find frequently searched types of Places with
only a few screen taps
•
you can search for a Place by its category
•
you can search for a Place by its name
In addition, you can search for special services from the 'Where Am I?' screen.
INA-W910R Navigation Software Owner’s Manual
32
3.1.2.1 Quick search for a Place of Interest
The Quick search feature lets you quickly find a Place by its name. The search is always
carried out
•
along the recommended route if it exists or
•
around your current location if there is no destination given.
1.
Start the Quick search function:
•
If you are on the Map screen, tap
•
If you are in the Navigation menu, tap
and then tap
,
.
and then tap
.
2.
Using the keyboard, start entering the name of the Place.
3.
After entering a few letters, tap
to open the list of Places with
names containing the entered character sequence.
4.
(optional) The Places in the list are ordered by the length of the necessary detour
(when navigating a route) or by their distance from the current position (when no
destination is given). If you need to reorder the list, tap
.
5.
Browse the list if necessary and tap one of the list items. A full screen map appears
with the selected point in the middle. The name and address of the Place is displayed
at the top of the screen.
6.
(optional) Tap
to see the details of the selected Place. Tap
to return to the map.
INA-W910R Navigation Software Owner’s Manual
33
7.
If necessary, tap the map somewhere else to modify the destination. The Cursor
(
) appears at the new location. Tap
to select a different destination.
destination, or tap
8.
to confirm the
After a short summary of the route parameters, the map appears showing the entire
route. The route is automatically calculated. Tap
to modify route
and start your journey.
parameters, or tap
3.1.2.2 Searching for a Place of Interest using preset categories
The Preset search feature lets you quickly find the most frequently selected types of Places.
1.
If you are on the Map screen, press Navi Menu to return to the Navigation menu.
2.
In the Navigation menu, tap the following buttons:
3.
The preset search categories appear:
•
,
.
:
•
If an active route exists, petrol stations are searched along the route.
•
If there is no active route (destination is not selected), they are searched
around the current position.
•
If the current position is not available either (no GPS signal), they are
searched around the last known position.
•
:
•
If an active route exists, parking lots are searched around the destination
of the route.
•
If there is no active route (destination is not selected), they are searched
around the current position.
INA-W910R Navigation Software Owner’s Manual
34
•
If the current position is not available either (no GPS signal), they are
searched around the last known position.
•
:
•
If an active route exists, restaurants are searched along the route.
•
If there is no active route (destination is not selected), they are searched
around the current position.
•
If the current position is not available either (no GPS signal), they are
searched around the last known position.
•
:
•
If an active route exists, accommodation is searched around the
destination of the route.
•
If there is no active route (destination is not selected), they are searched
around the current position.
•
If the current position is not available either (no GPS signal), they are
searched around the last known position.
4.
Tap any of the quick search buttons to get an instant list of Places.
5.
(optional) The Places in the list are ordered by their distance from the current or last
known position, from the destination or by the length of the necessary detour. If you
need to reorder the list, tap
.
6.
Browse the list if necessary and tap one of the list items. A full screen map appears
with the selected point in the middle. The name and address of the Place is displayed
at the top of the screen.
7.
(optional) Tap
to see the details of the selected Place. Tap
to return to the map.
8.
If necessary, tap the map somewhere else to modify the destination. The Cursor
(
) appears at the new location. Tap
destination, or tap
9.
to confirm the
to select a different destination.
After a short summary of the route parameters, the map appears showing the entire
route. The route is automatically calculated. Tap
parameters, or tap
to modify route
and start your journey.
INA-W910R Navigation Software Owner’s Manual
35
3.1.2.3 Searching for a Place of Interest by category
You can search for Places of Interest by their categories and subcategories.
1.
If you are on the Map screen, press Navi Menu to return to the Navigation menu.
2.
In the Navigation menu, tap the following buttons:
3.
Tap
4.
Select the area around which the Place should be searched for:
5.
,
.
.
•
Tap
to search around the current position or if it is not
available, around the last know position. (The result list will be ordered by the
distance from this position.)
•
Tap
to search for a place within a selected city/town. (The
result list will be ordered by the distance from the centre of the selected
city/town.)
•
Tap
to search for a place around the destination of the
active route. (The result list will be ordered by the distance from the destination.)
•
Tap
to search along the active route, and not around a
given point. This is useful when you search for a later stopover that results in a
minimal detour only, such as searching for upcoming petrol stations or
restaurants. (The result list will be ordered by the length of the necessary
detour.)
(optional) If you have selected
INA-W910R Navigation Software Owner’s Manual
, select the city/town to search in.
36
6.
Select one of the main Place categories (e.g. Accommodation) or tap
to list all Places around the selected location or along the route.
7.
Select one of the Place subcategories (e.g. Hotel or Motel) or tap
to list all Places in the selected main category around the selected location or along the
route.
8.
Sometimes the list of brands in the selected Place subcategory appears. Select one
brand or tap
to list all Places in the selected subcategory around
the selected location or along the route.
9.
Finally, the results appear in a list.
INA-W910R Navigation Software Owner’s Manual
37
10. (optional) The Places in the list are ordered by their distance from the current or last
known position, from the selected city/town, from the destination or by the length of the
necessary detour. If you need to reorder the list, tap
.
11. Browse the list if necessary and tap one of the list items. A full screen map appears
with the selected point in the middle. The name and address of the Place is displayed
at the top of the screen.
12. (optional) Tap
to see the details of the selected Place. Tap
to return to the map.
13. If necessary, tap the map somewhere else to modify the destination. The Cursor
(
) appears at the new location. Tap
destination, or tap
to confirm the
to select a different destination.
14. After a short summary of the route parameters, the map appears showing the entire
route. The route is automatically calculated. Tap
to modify route
and start your journey.
parameters, or tap
3.1.2.4 Searching for a Place of Interest by name
You can search for Places of Interest by their names. You can search around different
locations or along your route in the whole Place database or in one Place category or
subcategory only.
1.
If you are on the Map screen, press Navi Menu to return to the Navigation menu.
2.
In the Navigation menu, tap the following buttons:
3.
Tap
4.
Select the area around which the Place should be searched for:
•
,
.
.
Tap
to search around the current position or if it is not
available, around the last know position. (The result list will be ordered by the
distance from this position.)
INA-W910R Navigation Software Owner’s Manual
38
•
Tap
to search for a place within a selected city/town. (The
result list will be ordered by the distance from the centre of the selected
city/town.)
•
to search for a place around the destination of the
Tap
active route. (The result list will be ordered by the distance from the destination.)
•
Tap
to search along the active route, and not around a
given point. This is useful when you search for a later stopover that results in a
minimal detour only, such as searching for upcoming petrol stations or
restaurants. (The result list will be ordered by the length of the necessary
detour.)
5.
(optional) If you have selected
, select the city/town to search in.
6.
Select one of the main Place categories (e.g. Accommodation) to search in or tap
to search among all Places.
7.
Select one of the Place subcategories (e.g. Hotel or Motel) to search in or tap
to search in the selected Place category.
INA-W910R Navigation Software Owner’s Manual
39
8.
Tap
if you have not done it before.
9.
Using the keyboard, start entering the name of the Place.
10. After entering a few letters, tap
to open the list of Places with
names containing the entered character sequence.
11. (optional) The Places in the list are ordered by their distance from the current or last
known position, from the selected city/town, from the destination or by the length of the
.
necessary detour. If you need to reorder the list, tap
12. Browse the list if necessary and tap one of the list items. A full screen map appears
with the selected point in the middle. The name and address of the Place is displayed
at the top of the screen.
13. (optional) Tap
to see the details of the selected Place. Tap
to return to the map.
14. If necessary, tap the map somewhere else to modify the destination. The Cursor
(
) appears at the new location. Tap
destination, or tap
to confirm the
to select a different destination.
15. After a short summary of the route parameters, the map appears showing the entire
route. The route is automatically calculated. Tap
parameters, or tap
to modify route
and start your journey.
INA-W910R Navigation Software Owner’s Manual
40
3.1.2.5 Selecting nearby assistance from 'Where Am I?'
You can quickly search for nearby assistance from the 'Where Am I?' screen.
to open the Quick menu.
1.
On the Map screen, tap
2.
Tap
3.
Preset search categories appear, all for searching around the current position (or
around the last known position if the current position is not available):
4.
, and then
.
•
: Car repair and roadside assistance services
•
: Medical and emergency services
•
: Police stations
•
: Petrol stations
Tap any of the quick search buttons to get an instant list of that type of Places.
INA-W910R Navigation Software Owner’s Manual
41
5.
(optional) The Places in the list are ordered by their distance from the current or last
known position, from the selected city/town, from the destination or by the length of the
necessary detour. If you need to reorder the list, tap
.
6.
Browse the list if necessary and tap one of the list items. A full screen map appears
with the selected point in the middle. The name and address of the Place is displayed
at the top of the screen.
7.
(optional) Tap
to see the details of the selected Place. Tap
to return to the map.
8.
If necessary, tap the map somewhere else to modify the destination. The Cursor
(
) appears at the new location. Tap
destination, or tap
9.
to confirm the
to select a different destination.
After a short summary of the route parameters, the map appears showing the entire
route. The route is automatically calculated. Tap
parameters, or tap
to modify route
and start your journey.
3.1.3 Selecting a map location as the destination
1.
If you are on the Map screen, press Navi Menu to return to the Navigation menu.
2.
In the Navigation menu, tap the following buttons:
3.
Locate your destination on the map: move and scale the map as needed.
INA-W910R Navigation Software Owner’s Manual
,
.
42
4.
Tap the location that you want to select as your destination. The Cursor (
appears.
)
5.
Tap
6.
After a short summary of the route parameters, the map appears showing the entire
to select the Cursor as the destination.
to modify route
route. The route is automatically calculated. Tap
parameters, or tap
and start your journey.
3.1.4 Selecting the destination from your Favourites
You can select a location that you have already saved as a Favourite to be your destination.
Adding a location to the list of Favourite destinations is described on page 58.
1.
2.
Access the list of Favourites:
•
If you are on the Map screen, tap
•
If you are in the Navigation menu, tap
and then tap
and then tap
.
.
The list of Favourite destinations is displayed.
INA-W910R Navigation Software Owner’s Manual
43
3.
Tap the Favourite that you want to set as your destination. If necessary, browse down
to see more of the list or tap
name of the Favourite destination.
4.
and enter a few letters from the
A full screen map appears with the selected point in the middle. If necessary, tap the
map somewhere else to modify the destination. The Cursor (
) appears at the
to confirm the destination, or tap
new location. Tap
to select a different destination.
5.
After a short summary of the route parameters, the map appears showing the entire
route. The route is automatically calculated. Tap
to modify route
and start your journey.
parameters, or tap
3.1.5 Selecting one of the most likely destinations (Smart History)
The destinations that you have set earlier appear in the History list. Two of those recent
destinations are shown in the Destination menu for easy access. Smart History offers these
locations based on your navigation habits, using parameters like the current time of day, the
day of week, and the current location. The more you use the navigation software, the better it
can guess your desired destination.
1.
If you are on the Map screen, press Navi Menu to return to the Navigation menu.
2.
In the Navigation menu, tap
3.
Tap the
4.
A full screen map appears with the selected point in the middle. If necessary, tap the
or the
.
destination in the History field.
map somewhere else to modify the destination. The Cursor (
INA-W910R Navigation Software Owner’s Manual
) appears at the
44
new location. Tap
to confirm the destination, or tap
to select a different destination.
5.
After a short summary of the route parameters, the map appears showing the entire
route. The route is automatically calculated. Tap
to modify route
and start your journey.
parameters, or tap
3.1.6 Selecting a recent destination from the History
The destinations that you have set earlier appear in the History.
1.
Access the History:
•
If you are on the Map screen, tap
•
If you are in the Navigation menu, tap
and then tap
.
and then tap
.
2.
The list of recent destinations appears. Smart History promotes three destinations to
the first page based on your previous routes (most likely destinations). The rest of the
destinations are ordered by time they were last selected. If necessary, scroll the list to
see earlier destinations.
3.
Select a destination from the list.
4.
A full screen map appears with the selected point in the middle. If necessary, tap the
map somewhere else to modify the destination. The Cursor (
INA-W910R Navigation Software Owner’s Manual
) appears at the
45
new location. Tap
to confirm the destination, or tap
to select a different destination.
5.
After a short summary of the route parameters, the map appears showing the entire
route. The route is automatically calculated. Tap
to modify route
and start your journey.
parameters, or tap
3.1.7 Entering the coordinate of the destination
You can also select a destination by entering its coordinate. Do as follows:
1.
If you are on the Map screen, press Navi Menu to return to the Navigation menu.
2.
In the Navigation menu, tap
3.
Open the
4.
You can enter the latitude and longitude values in any of the following formats: decimal
degrees; degrees and decimal minutes; or degrees, minutes and decimal seconds.
5.
(optional) If necessary, tap
the coordinate in UTM format.
.
menu and tap
INA-W910R Navigation Software Owner’s Manual
.
then
and enter
46
6.
When finished, tap
.
7.
A full screen map appears with the selected point in the middle. If necessary, tap the
) appears at the
map somewhere else to modify the destination. The Cursor (
new location. Tap
to confirm the destination, or tap
to select a different destination.
8.
After a short summary of the route parameters, the map appears showing the entire
route. The route is automatically calculated. Tap
parameters, or tap
to modify route
and start your journey.
3.1.8 Navigate to a location stored in a picture
You can also set the location stored in a picture as your destination. Do as follows:
1.
If you are on the Map screen, press Navi Menu to return to the Navigation menu.
2.
In the Navigation menu, tap
3.
Open the
4.
The list of picutres stored in the device appears. Select one picture from the list.
5.
A full screen map appears with the selected point in the middle. If necessary, tap the
.
menu and tap
map somewhere else to modify the destination. The Cursor (
new location. Tap
.
) appears at the
to confirm the destination, or tap
to select a different destination.
6.
After a short summary of the route parameters, the map appears showing the entire
route. The route is automatically calculated. Tap
parameters, or tap
to modify route
and start your journey.
INA-W910R Navigation Software Owner’s Manual
47
Note!
Only geotagged JPG files contain location information. That is why these kind of
files can only be used in navigation. Other picture files do not appear in the list.
Files must be located on an inserted SD card, either in the root folder or in a
"pictures" folder.
3.1.9 Building a route from the list of destinations (Create Route)
You can also build your route destination by destination from the My Route menu.
1.
If you are on the Map screen, press Navi Menu to return to the Navigation menu.
2.
In the Navigation menu, tap
3.
Tap
4.
There is only one line in the list of route points, the start point of the route, normally the
current GPS position.
5.
Tap
6.
The Destination menu appears and you can select the destination of the route the
same way as described in the previous sections.
7.
When the new destination is selected, the list returns.
.
.
to select the destination.
INA-W910R Navigation Software Owner’s Manual
48
8.
To add more destinations, tap
where you want to insert the new route point in
the list, and repeat the above procedure.
3.2 Viewing the entire route on the map
It is easy to get a map overview of the active route. Do as follows:
1.
If you are on the Map screen, press Navi Menu to return to the Navigation menu.
2.
In the Navigation menu, tap
3.
Tap
. The active route is displayed in its full length on the map together with
additional information and controls.
.
3.3 Checking route parameters and accessing route related functions
You can check different parameters of the route recommended by the software.
1.
If you are on the Map screen, press Navi Menu to return to the Navigation menu.
2.
In the Navigation menu, tap
3.
The following pieces of information are displayed:
.
•
The name and/or address of the destination.
•
Warning icons (if any). They provide extra information about your route (e.g.
unpaved roads or toll roads to be taken).
•
The total time of the route.
INA-W910R Navigation Software Owner’s Manual
49
4.
•
The total length of the route.
•
Estimated delay calculated from traffic events on your route.
•
The symbol of the vehicle type used in route calculation.
•
The route planning method (e.g. Fast).
You have the following options on this screen (for detailed instructions on how to use
them, see the next chapter):
•
Tap
to edit the route: to add or remove destinations or change their
sequence. You can also set a route start point other than your current location.
This can be useful to plan and save a future trip.
•
Tap
to display the entire route on the map.
•
Tap
to bypass a part of the route.
•
Tap
to delete the active route.
•
Tap
to open a list with more options like selecting from
route alternatives, changing route parameters, simulating the route, saving the
active route or loading a previously saved route.
•
Tap
to return to the Navigation menu.
3.4 Modifying the route
When navigation is already started, there are several ways to modify the active route. The
following sections show some of those options.
3.4.1 Selecting a new destination when already having a route: New Route,
Waypoint or Final Destination
If you already have a recommended route and you select a new destination as described in
the above sections, the application will ask you whether to start a new route, add a new
waypoint (intermediate destination) to the route or append the newly selected destination at
the end of the current route.
INA-W910R Navigation Software Owner’s Manual
50
•
Tap
to plan a new route to the newly selected location. The previous
destination and waypoint(s) are deleted.
•
to add the newly selected location as an intermediate destination to your
Tap
route. The other destinations of the route remain intact. Note: the new waypoint is
placed among destinations to keep the route optimal. To decide where a waypoint to
appear, use the Edit Route feature.
•
Tap
to append the newly selected destination at the end of the route. The
other destinations of the route remain intact. The previous final destination is now the
last waypoint.
3.4.2 Setting a new starting position for the route
For normal navigation, all routes are planned from the current position. In order to check
future routes, simulate them or see their length in time and distance, you can turn off the GPS
receiver. Then you can set the starting point of the route to a different location than the
current GPS position.
1.
If you are on the Map screen, press Navi Menu to return to the Navigation menu.
2.
In the Navigation menu, tap
3.
If you already have a route, tap
.
. If you are starting a new route, tap
INA-W910R Navigation Software Owner’s Manual
.
51
4.
The first line is the start of the route, normally the current GPS position. Tap
confirm your action at the warning message.
5.
The Destination menu appears and you can select the start point of the route the same
way you select a destination.
6.
When the new start point is set, tap
7.
The map returns with a transparent Vehimarker (showing that there is no GPS
reception). If an active route already existed, it is now recalculated starting from the
selected location.
8.
To return to normal navigation, tap
INA-W910R Navigation Software Owner’s Manual
and
.
.
52
3.4.3 Editing the list of destinations (Edit Route)
You can edit the route by modifying the list of destinations. You can add or remove
destinations, modify the start position or reorder the list.
1.
If you are on the Map screen, press Navi Menu to return to the Navigation menu.
2.
In the Navigation menu, tap
3.
Tap
4.
You have the following options:
.
.
•
Tap
to add a new destination.
•
Tap
to delete a destination.
•
Tap
to modify the start point of the route.
•
Tap
to reorder the list. You can do it manually or you can
let the application optimise the route for you.
3.4.4 Pausing the active route
You do not need to pause the active route: when you start driving again, the software restarts
the voice instructions from your position.
INA-W910R Navigation Software Owner’s Manual
53
3.4.5 Cancelling the active route
To cancel the navigated route, do one of the following:
•
•
If you are on the Map screen, tap
and then tap
have a route with waypoints, you need to tap
until all waypoints are deleted.)
In the Navigation menu, tap
deleted with all its waypoints.
and then tap
. (If you
.. The active route is
3.4.6 Checking route alternatives when planning the route
You can select from different route alternatives or change the route planning method after you
have selected a new destination. Do as follows:
1.
Select a destination as explained earlier, and get to the route confirmation screen.
2.
Tap
.
3.
Tap
.
4.
You see the basic details of three route alternatives with the selected route planning
method. Tap any of them to see it on the map.
INA-W910R Navigation Software Owner’s Manual
54
5.
Or if you cannot find a good alternative, tap
routes with different routing methods.
and scroll down for
6.
Select one of the route alternatives and tap
to return to the
previous screen. The software recalculates the route. The orange line now shows the
new recommended route.
3.4.7 Checking route alternatives for an existing route
To recalculate the active route with a different route planning method, you can modify the
Route settings. There is another way to do this and to compare different route alternatives
with the same route planning method. Do as follows:
1.
If you are on the Map screen, press Navi Menu to return to the Navigation menu.
2.
In the Navigation menu, tap
3.
Tap
.
.
INA-W910R Navigation Software Owner’s Manual
55
4.
Tap
.
5.
You see the basic details of three route alternatives with the selected route planning
method. Tap any of them to see it on the map.
6.
Or if you cannot find a good alternative, tap
routes with different routing methods.
7.
Select one of the route alternatives then tap and hold
for a few
seconds to return to the Map screen. The software recalculates the route. The orange
line now shows the new recommended route.
and scroll down for
3.4.8 Changing the vehicle used in route planning
To recalculate the active route for a different vehicle, do as follows. These changes can also
be made in Settings.
1.
On the Map screen, tap
2.
Tap
and then tap
.
and then tap one of the following:
•
•
INA-W910R Navigation Software Owner’s Manual
56
•
•
3.
The software recalculates the route optimised for the new vehicle type. The orange line
now shows the new recommended route.
3.4.9 Changing the road types used in route planning
To recalculate the active route with different road type preferences, do as follows. These
changes can also be made in Settings.
1.
On the Map screen, tap
2.
Tap any of the listed road types to modify the route. If needed, scroll the list for all road
types. You have the following options (their order depends on the selected vehicle
type):
3.
and then tap
.
•
- You might need to avoid motorways when you are driving
a slow car or you are towing another vehicle.
•
- Charge roads are pay roads where you can purchase a
pass or vignette to use the road for a longer period of time. They can be
enabled or disabled separately from toll roads.
•
- The software includes toll roads (pay roads where there is
a per-use charge) in the routes by default. If you disable toll roads, your
software plans the best toll-free route.
•
- The software includes ferries in a planned route by
default. However, a map does not necessarily contain information about the
accessibility of temporary ferries. You might also need to pay a fare on ferries.
•
- The software excludes unpaved roads by default:
unpaved roads can be in a bad condition and usually you cannot reach the
speed limit on them.
Tap
to confirm the changes. The software recalculates the route.
The orange line now shows the new recommended route.
INA-W910R Navigation Software Owner’s Manual
57
3.5 Saving a location as a Favourite destination
You can add any location to Favourites, the list of frequently used destinations. Planning a
route to one of the Favourite destinations was described earlier.
1.
Select a destination as described before. It can be an address, a Place, any location
on the map, a previously used destination from History, a coordinate or a location
where a photo was taken.
2.
When the full screen map appears with the selected location in the middle, tap
.
3.
Tap
.
4.
(optional) Using the keyboard, you can change the name offered for the Favourite. Tap
to enter symbols.
5.
Tap
to save the location as a new Favourite destination.
3.6 Watching the simulation of the route
You can run a simulated navigation that demonstrates the active route. Do as follows:
1.
If you are on the Map screen, press Navi Menu to return to the Navigation menu.
2.
In the Navigation menu, tap
.
INA-W910R Navigation Software Owner’s Manual
58
3.
Tap
4.
Tap
. The simulation starts from the starting point of the route, and
using a realistic speed, it leads you through the whole recommended route.
1.
(optional) You have the following controls during the simulation:
•
: Jump to the next route event (manoeuvre).
•
: Pause the simulation.
•
: Jump to the previous route event (manoeuvre).
•
2.
.
Tap
: Tap to increase the speed of the simulation to 4, 8 or 16 times faster.
Now tap again to return to the normal speed.
to stop the simulation.
INA-W910R Navigation Software Owner’s Manual
59
4 Reference Guide
On the following pages you will find the description of the different concepts and menu
screens of the software.
4.1 Concepts
4.1.1 Smart Zoom
Smart Zoom provides much more than just a usual automatic zoom feature:
•
While following a route: when approaching a turn, it will zoom in and raise the view
angle to let you easily recognise your manoeuvre at the next junction. If the next turn is
at a distance, it will zoom out and lower the view angle to be flat so you can see the
road in front of you.
•
While driving without an active route: Smart Zoom will zoom in if you drive slowly
and zoom out when you drive at high speed.
4.1.2 Daytime and night colour themes
The software uses different colour themes during the day and during the night for both the
map and the menu screens.
•
Daytime colours are similar to paper road maps, and the menus are bright.
•
The night colour themes use dark colours for large objects to keep the average
brightness of the screen low.
The software offers different daytime and night colour profiles. It can also switch automatically
between the daytime and the night schemes based on the current time and GPS position a
few minutes before sunrise, when the sky has already turned bright, and a few minutes after
sunset, before it becomes dark.
4.1.3 Route calculation and recalculation
Your software calculates the route based on your preferences:
•
Route planning methods:
•
: Gives a quick route if you can travel at or near the speed
limit on all roads. Usually the best selection for fast and normal cars.
•
: Gives a route that has the smallest total distance of all
possible routes. It can be practical for slow vehicles.
•
: Gives a quick but fuel efficient route based on the fuel
consumption data given in Green Routing settings (page 73). Travel cost and
INA-W910R Navigation Software Owner’s Manual
60
CO2 emission calculations are estimations only. They cannot take elevations,
curves and traffic conditions into account.
•
•
: Results in a route with fewer turns and no difficult
manoeuvres. With this option, you can make your software to take, for example,
the motorway instead of a series of smaller roads or streets.
Vehicle types:
•
:
•
Manoeuvre restrictions and directional constraints are taken into account
when planning a route.
•
Roads are used only if access for cars is allowed.
•
Private roads and resident-only roads are used only if they are inevitable
to reach the destination.
•
Walkways are excluded from routes.
•
:
•
All manoeuvres are available in intersections.
•
Directional constraints are taken into account the way that opposite
direction is allowed with a low speed.
•
A private road is used only if the destination is there.
•
Walkways are excluded from routes.
•
:
•
Manoeuvre restrictions and directional constraints are taken into account
when planning a route.
•
Roads are used only if access for buses is allowed.
•
Private roads, resident-only roads and walkways are excluded from
routes.
•
•
:
•
Manoeuvre restrictions and directional constraints are taken into account
when planning a route.
•
Roads are used only if access for taxis is allowed.
•
Private roads, resident-only roads and walkways are excluded from
routes.
Road types used or avoided in route calculation:
•
•
•
INA-W910R Navigation Software Owner’s Manual
61
•
•
Whenever data exist, route calculation takes into account statistical traffic data for the given
day of week and time of day.
Real-time Traffic events are also taken into account and sometimes greatly modify the route.
Your software automatically recalculates the route if you deviate from the proposed itinerary
or if a newly received Traffic event concerns a part of the recommended route.
4.1.4 Green routing
Route calculation is not only about finding the quickest or shortest route. For some of the
vehicle types, you can also check the fuel consumption and CO2 emission when planning a
route, and you can create cost effective routes with less effect on the environment.
In Settings, select
to enter the necessary parameters of your vehicle and
the average fuel price. You can also select whether you want to see the difference between
your route and the green route even if the selected routing method is not Green.
After the above parameters are set, select
as route planning method to
get a fast but also fuel efficient route. Note that travel cost and CO2 emission calculations are
estimations only. They cannot take elevations, turns, curves and traffic conditions into
account. Also, this routing is not meant to give you the "greenest" route of all. It is still
important to travel quickly so the result is a fast route with low fuel consumption and CO2
emission.
With a vehicle type where green routing is selectable, whichever route planning method is
selected, the Green details are also shown when you confirm the route:
If the selected route planning method is not Green, and you have allowed the application to
show the green alternative, the price, fuel consumption and CO2 emission differences
between your selected route and the Green route are also shown on this screen:
Tap the field with these details to switch the route to Green immediately.
INA-W910R Navigation Software Owner’s Manual
62
4.1.5 Road safety cameras and other proximity alert points
There is a special proximity warning for road safety cameras (like speed or red light cameras)
and other proximity alert points (like schools or railroad crossings). These alert points are not
part of the software. You can download them from alpine.naviextras.com or you can upload
points in a specific text file if needed.
The application can warn you when you approach road safety cameras like speed cameras or
dangerous areas like school zones or railroad crossings. You can set up the different alert
types individually in Sound and Warning settings (page 68).
The following alert types are available:
•
Audio warning: beeps or the spoken type of the alert can be played while you are
approaching one of these points, or extra alert sounds if you exceed the given speed
limit while approaching.
•
Visual warning: the type of the alert point, its distance and the related speed limit
appear on the Map screen while you are approaching one of these cameras.
For some of the alert points, the enforced or expected speed limit is available. For these
points, the audio alert can be different if you are below or above the given speed limit.
•
Only when speeding: The audio alert is only played when you exceed the given speed
limit.
•
When approaching: The audio alert is always played. In order to draw your attention,
the alert can be different if you exceed the speed limit.
Note!
The warning for road safety cameras is disabled when the GPS position is not
yet available or if you are in certain countries where road safety camera warning
is prohibited.
4.1.6 Speed limit warning
Maps may contain information about the speed limits of the road segments. The software is
able to warn you if you exceed the current limit. This information may not be available for your
region (ask your local dealer), or may not be fully correct for all roads in the map. Speed
warning can be fine-tuned in Sound and Warning settings.
You can set the relative speed above which the application initiates the warning.
The following alert types are available:
•
Audio warning: you receive a verbal warning when you exceed the speed limit with the
given percentage.
•
Visual warning: the current speed limit is shown on the map when you exceed it (for
example:
).
You can also choose to see the speed limit sign on the map all the time.
4.1.7 Traffic information in route planning
The recommended route is not always the same between two points. Offline statistical traffic
information (historical speed information or traffic patterns) can be taken into account in the
route calculation based on the time of day and the day of week whenever suitable data exists.
In addition, real-time traffic information can help you avoid current traffic events like temporary
INA-W910R Navigation Software Owner’s Manual
63
road closures or a traffic jam caused by an accident. Both functions are subject to data
availability.
4.1.7.1 Historical traffic
If statistical traffic information is stored with the map data, the software can take them into
account when planning a route. In normal cases, these statistics help you avoid usual traffic
jams on the given day of week in the given hour but in some cases like on public holidays that
fall on normal weekdays, they can be misleading. You can enable this feature in Traffic
settings.
4.1.7.2 Real-time traffic information (TMC)
TMC (Traffic Message Channel) can provide you with the real-time status of the traffic. Route
calculation can avoid road blocks or unexpected traffic jams caused by an accident.
TMC is a specific application of the FM Radio Data System (RDS) used for broadcasting realtime traffic and weather information.
Using traffic information is enabled by default in the software.
Note!
TMC is not a global service. It may not be available in your country or region.
Ask your local dealer for coverage details.
Your device contains the TMC receiver that is needed to receive Traffic events.
If public Traffic data is broadcast at your location, the software automatically takes into
account the traffic events received. You do not need to set anything in the program. The
receiver will automatically search the FM radio stations for TMC data, and the decoded
information will immediately be used in route planning. When your software receives traffic
information that may affect your route, the program will warn you that it is recalculating the
route, and navigation will continue with a new route that is optimal considering the most up-todate traffic conditions.
To fine-tune this recalculation, you can set the minimum delay that can trigger a route
recalculation, or you can instruct the software to have you confirm the new recommended
route before it takes effect. You can do these in Traffic settings.
) is displayed on the Map screen to show you whether
A special icon (
traffic events are received. The icon shows the status of the traffic receiver when there are no
traffic events on your route, otherwise it shows the type of the next traffic event on your route.
Road segments affected by traffic events are displayed with an alternate colour on the map,
and small symbols above the road show the nature of the event:
Tap
to open the list of traffic even categories :
INA-W910R Navigation Software Owner’s Manual
64
In the first column you can see the number of traffic events on your route. The second column
contains the full count of traffic events in the categories.
Tap any of the even types to open the list of traffic events or tap the first line to show all
events:
Now tap any of the list items to see its details, and to display the affected road segment in its
full length on the map:
4.2 'More' menu
The 'More' menu provides you with various options and additional applications.
In the Navigation menu, tap
.
Button
Description
Access the Picture Viewer application. View the pictures stored on
your device. If coordinates are stored in your photos, you can start
navigating to the place where the selected photo was taken.
INA-W910R Navigation Software Owner’s Manual
65
Access travel applications: the unit converter helps you convert
between various different international units for temperature, speed,
area or pressure, etc.
Access travel applications: the clothing size converter helps you
convert between various different international size units for men's or
women's cloth types and shoes.
The scientific calculator helps you in all your calculation needs. Tap
the Mode button for additional functions and use the memory to save
your results.
If you save your trip logs when you arrive at some of your destinations
or let the application automatically save the trip logs for you, those
logs are all listed here. Tap one of the trips to see the trip statistics,
speed and altitude profile. If track log has also been saved, you can
display it on the map with the selected colour. Track logs can be
exported to GPX files for later use.
As a shortcut, the Trip monitor can be accessed from the Navigation
menu.
The Fuel consumption monitor helps you keep track of the
consumption of your car even if you do not use navigation for all your
journeys. Set the initial odometer value and then record the distance
taken and fuel filled in whenever you fill your car. You can also set
reminders for regular car maintenance.
Tap this button to see the sunlit and dark areas of the world. Your
current location and route points are marked on the map. Tap the
Details button to see the exact sunrise and sunset times for all your
route points (your current location, all waypoints and the final
destination).
Select a country from the list and see useful driving information about
the selected country. Information may include speed limits on different
road types, the maximum blood alcohol level and any compulsory
equipment you need to show when stopped by the police.
Run the Demo to watch sample route simulations to see how
navigation works.
Visit alpine.naviextras.com to get additional content, such as new
maps or 3D landmarks and useful applications.
The About section provides you with product information. Read the
Software and Database End User License Agreement, or check the
map and other contents of the application. You can also access
program usage statistics.
INA-W910R Navigation Software Owner’s Manual
66
4.3 Settings menu
You can configure the program settings, and modify the behaviour of the software.
In the Navigation menu, tap
.
The Settings menu has several options. Tap
Button
or scroll with your finger to see the full list.
Description
Adjust the sound volume, mute your device or change the voice
guidance language. In addition, you can enable and set up different
warnings and alerts.
The content of the Quick menu (page 19) is fully customisable. Tap
the button you want to change, and select its new function from the
list.
The recommended route is not always the same between two points.
Whenever suitable data exists, traffic information can be taken into
account in the route calculation.
These settings determine how routes will be calculated. Select the
type of vehicle you are driving, the road types used in route planning,
and the route planning method.
These settings determine how Green routes will be calculated. They
are also used to display the cost and CO2 emission of routes.
You can fine-tune the appearance of the Map screen. Adjust the map
view to your needs, choose suitable colour themes from the list for
both daytime and night use, change the blue arrow to a 3D car model,
show or suppress 3D buildings, turn track logging on or off, and
manage you Place visibility sets (which Places to show on the map).
Adjust how the software helps you navigate with different kinds of
route related information on the Map screen.
These settings allow you to customise the application for your local
language, measurement units, time and date settings and formats, as
well as to choose the time zone.
INA-W910R Navigation Software Owner’s Manual
67
Trip logs and track logs contain useful information about your trips.
Trip logs can be saved manually when you reach your destination or
you can turn on the automatic saving here.
Modify the basic software parameters set during the initial setup
process. For details, see page 7.
Delete all saved data and reset all settings to their factory defaults.
4.3.1 Sound and Warnings
Adjust the sound volume, mute your device or change the voice guidance language. In
addition, you can enable and set up different warnings and alerts.
Button
Description
Tap this button to adjust the volume of the different sounds in the
application. A new screen shows the different sound types and their
controls. See below for details.
This button shows the current voice guidance profile. By tapping the
button, you can select a new profile from the list of available languages
and speakers. Tap any of these to hear a sample voice prompt. Just
tap
language.
when you have selected the new spoken
Maps may contain information about the speed limits of the road
segments. The software is able to warn you if you exceed the current
limit. This information may not be available for your region (ask your
local dealer), or may not be fully correct for all roads in the map. This
setting lets you decide whether you wish to receive visible and/or
audible warnings.
Adjust the slider to set the relative speed above which the application
initiates the warning.
The following alert types are available:
•
Audio warning: you receive a verbal warning when you exceed
the speed limit with the given percentage.
•
Visual warning: the current speed limit is shown on the map
when you exceed it.
If you prefer to see the speed limit sign on the map all the time
(normally it is shown only if your speed exceeds it), you can set it here.
This feature allows you to receive a warning when approaching a Road
Safety Camera. You must ensure on your own liability that using this
feature is legal in the country where you intend to use it.
This button is not displayed when GPS position is not available or if
you are in certain countries where road safety camera warning is
prohibited. Even if the button is available, you are responsible for
checking whether it is legal to use this feature at your location.
INA-W910R Navigation Software Owner’s Manual
68
The application can warn you when you approach road safety cameras
like speed cameras or dangerous areas like school zones or railroad
crossings. Tap this button and set the different alert types individually.
The following alert types are available:
•
Audio warning: beeps or the name of the alert type can be
played while you are approaching the camera, or extra alert
sounds if you exceed the speed limit while approaching one of
these cameras.
•
Visual warning: the type of the alert point, its distance and the
related speed limit appear on the Map screen while you are
approaching one of these cameras.
For some of the alert points, the enforced or expected speed limit is
available. For these points, the audio alert can be different if you are
below or above the given speed limit.
•
Only when speeding: The audio alert is only played when you
exceed the given speed limit.
•
When approaching: The audio alert is always played. In order to
draw your attention, the alert can be different if you exceed the
speed limit.
Road safety cameras are not displayed in the list when GPS position is
not available or if you are in certain countries where road safety
camera warning is prohibited.
Maps may contain driver alert information. Tap this button to turn on or
off these warnings and to set the distance from the hazard to receive
the warning at. These can be set individually for the different warning
types.
You can control the volume of the following sound types:
Button
Description
This is the main volume control. These controls affect all below
sounds. They can also be accessed from the Quick menu.
These controls affect the volume of the guidance sounds (verbal
instructions).
These controls affect the volume of the alert sounds (beeps).
Key sounds provide audible confirmation of either pressing hardware
buttons or tapping the touch screen. These controls affect key sounds.
INA-W910R Navigation Software Owner’s Manual
69
Controls for each sound type:
Button
Volume slider
Description
Adjusts the volume of the related sound.
Use the switch to mute the related sound. The slider becomes inactive.
Tap again to re-enable.
4.3.2 Customise Quick menu
The content of the Quick menu is fully customisable. Tap the button you want to change, and
select its new function from the list.
4.3.3 Traffic settings
The recommended route is not always the same between two points. Whenever suitable data
exists, traffic information can be taken into account in the route calculation.
Button
Description
Use this switch to enable or disable historical traffic data and traffic
patterns. This locally stored information can be very useful in normal
circumstances but for example on public holidays it may be better to
turn off in order not to take into account normal weekday traffic jams.
Use this switch to enable or disable the TMC receiver that can receive
real-time traffic information. The rest of the buttons below are all
related to the TMC function and are available only if the receiver is
enabled.
This setting determines how your software uses the received realtime traffic information in route calculation. When calculating a new
route, or when recalculation becomes necessary based on the
received Traffic events, your software avoids traffic events if it makes
sense.
You can also set the minimum delay that triggers route recalculation,
and you can instruct the application if you want to confirm every
recalculation.
Tap this button to open the list of traffic event types, and select which
events to take into account in route calculation.
INA-W910R Navigation Software Owner’s Manual
70
4.3.4 Route settings
These settings determine how routes will be calculated.
Button
Description
You can set the type of vehicle you will use to navigate the route.
Based upon this setting, some of the road types can be excluded from
the route, or some of the restrictions may not be taken into account in
route calculation.
The route calculation can be optimised for different situations and
vehicle types by changing the planning method. See below for details.
To let the route fit your needs, you can also set which road types are to be considered for or
to be excluded from the route if possible.
Excluding a road type is a preference. It does not necessarily mean total prohibition. If your
destination can only be accessed using some of the excluded road types, they will be used
but only as much as necessary. In this case a warning icon will be shown on the My Route
screen, and the part of the route not matching your preference will be displayed in a different
colour on the map.
In the list of road types you can see in how many segments and what total length of the road
type is used in the current route.
Button
Description
You might need to avoid motorways when you are driving a slow car or
you are towing another vehicle.
Charge roads are pay roads where you can purchase a pass or
vignette to use the road for a longer period of time. They can be
enabled or disabled separately from toll roads.
The software includes toll roads (pay roads where there is a per-use
charge) in the routes by default. If you disable toll roads, your software
plans the best toll-free route.
The software includes ferries in a planned route by default. However, a
map does not necessarily contain information about the accessibility of
temporary ferries. You might also need to pay a fare on ferries.
The software excludes unpaved roads by default: unpaved roads can
be in a bad condition and usually you cannot reach the speed limit on
them.
INA-W910R Navigation Software Owner’s Manual
71
Vehicle types:
•
:
•
Manoeuvre restrictions and directional constraints are taken into account when
planning a route.
•
Roads are used only if access for cars is allowed.
•
Private roads and resident-only roads are used only they are inevitable to reach
the destination.
•
Walkways are excluded from routes.
•
:
•
All manoeuvres are available in intersections.
•
Directional constraints are taken into account the way that opposite direction is
allowed with a low speed.
•
A private road is used only if the destination is there.
•
Walkways are excluded from routes.
•
:
•
Manoeuvre restrictions and directional constraints are taken into account when
planning a route.
•
Roads are used only if access for buses is allowed.
•
Private roads, resident-only roads and walkways are excluded from routes.
•
:
•
Manoeuvre restrictions and directional constraints are taken into account when
planning a route.
•
Roads are used only if access for taxis is allowed.
•
Private roads, resident-only roads and walkways are excluded from routes.
Route Planning Method types:
Button
Description
Gives a quick route if you can travel at or near the speed limit on all
roads. Usually the best selection for fast and normal cars.
Gives a short route to minimise the distance to travel. It can be
practical for slow vehicles. Searching for a short route regardless of
the speed, this route type is rarely practical for normal vehicles.
INA-W910R Navigation Software Owner’s Manual
72
Gives a quick but fuel efficient route based on the fuel consumption
data given in Green Routing settings (page 73). Travel cost and CO2
emission calculations are estimations only. They cannot take
elevations, curves and traffic conditions into account.
Results in a route with fewer turns and no difficult manoeuvres. With
this option, you can make your software to take, for example, the
motorway instead of a series of smaller roads or streets.
When selecting the Route Planning Method, tap the button at the bottom of the screen to
adjust the Green Routing setting:
Enter the average consumption of your vehicle when used in built-up
areas. The unit for consumption can be set in Regional Settings.
Enter the average consumption of your vehicle when used on
highways. The unit for consumption can be set in Regional Settings.
Select the engine and fuel type of your vehicle. This helps in estimating
the CO2 emission.
Enter the average fuel price for travel cost calculation. The currency
can be set in Regional Settings.
If the selected routing method is not Green, you can have your route
compared to the best green alternative on the screen when confirming
the route. If this alternative is much better than the selected method,
you can quickly switch to Green mode.
4.3.5 Green routing settings
These settings determine how Green routes will be calculated. They are also used to display
the cost and CO2 emission of routes.
Button
Description
Enter the average consumption of your vehicle when used in built-up
areas.
If
necessary,
tap
and
select
to change the measurement unit.
Enter the average consumption of your vehicle when used on
highways.
If
necessary,
tap
and
select
to change the measurement unit.
INA-W910R Navigation Software Owner’s Manual
73
Select the engine and fuel type of your vehicle. This helps in estimating
the CO2 emission.
Enter the average fuel price for travel cost calculation. If necessary, tap
and select
to change the
currency.
If the selected routing method is not Green, you can have your route
compared to the best green alternative on the screen when confirming
the route. If this alternative is much better than the selected method,
you can quickly switch to Green mode.
4.3.6 Map settings
You can fine-tune the appearance of the Map screen. Adjust the map view to your needs,
choose suitable colour themes from the list for both daytime and night use, change the blue
arrow to a 3D car model, show or hide 3D buildings, turn track logging on or off, and manage
you Place visibility sets (which Places to show on the map).
The map is always shown on the screen so that you can see the effect when you change a
setting.
Button
Description
Switch the map view between a 3D perspective view and a 2D topdown view.
Adjust the basic zoom and tilt levels to your needs. Three levels are
available.
Switch between daytime and night colour modes or let the software
switch between the two modes automatically a few minutes before
sunrise and a few minutes after sunset.
Select the colour scheme used in daytime mode.
Select the colour scheme used in night mode.
INA-W910R Navigation Software Owner’s Manual
74
Replace the default position marker to one of the 3D vehicle models.
You can select separate icons for different vehicle types selected for
route planning. Separate icons can be used for car, pedestrian and the
other vehicles.
Show or suppress 3D landmarks, 3D artistic or block representations
of prominent or well-known objects.
Show or suppress 3D city models, 3D artistic or block representation of
full city building data containing actual building size and position on the
map.
Turn on or off track log saving, that is, saving the sequence of the
locations your journeys go through.
Select which Places to show on the map while navigating. Too many
Places make the map crowded so it is a good idea too keep as few of
them on the map as possible. For this, you have the possibility to save
different Place visibility sets. You have the following possibilities:
•
Tap the checkbox to show or hide the Place category.
•
Tap the name of the Place category to open the list of its
subcategories.
•
Tap
to save the current Place visibility set
or to load a previously saved one. Here you can also revert to
the default visibility settings.
4.3.7 Visual guidance settings
Adjust how the software helps you navigate with different kinds of route related information on
the Map screen.
The data fields in the corner of the Map screen can be customised.
Tap this button and select the values you want to see. The values can
be different when you navigate a route from when you are just cruising
without a given destination. You can select general trip data like your
current speed or the altitude, or route data related to your final
destination or the next waypoint on your route.
If you are approaching a motorway exit or a complex intersection and
the needed information exists, the map is replaced with a 3D view of
the junction. You can turn this feature on or let the map be displayed
for the whole route.
Whenever adequate information is available, lane information similar to
the real ones on road signs above the road is displayed at the top of
the map. You can turn this feature on or off.
INA-W910R Navigation Software Owner’s Manual
75
Turn on the route progress bar to see your route as a straight line on
the right side of the map. The blue arrow represents your current
position and moves up as you travel. Waypoints and Traffic events are
also displayed on the line.
4.3.8 Display settings
Display related settings.
When animation is turned on, buttons on menus and keyboard screens
appear in an animated way. Screen transitions are also animated.
4.3.9 Regional settings
These settings allow you to customise the application for your local language, measurement
units, time and date settings and formats, as well as to choose the time zone.
Button
Description
This button displays the current written language of the user interface.
By tapping the button, you can select a new language from the list of
available languages. The application will restart if you change this
setting; you are asked to confirm this.
You can set the distance units to be used by the program. Your
software may not support all the listed units in some voice guidance
languages.
Select between 12 and 24 hours time display and the various
international date display formats.
By default, time zone is taken from the map information and adjusted
by your current location. Here you can set time zone and daylight
saving manually.
4.3.10 Trip monitor settings
Trip logs contain useful information about your trips. Trip logs can be saved manually when
you reach your destination or you can turn on the automatic saving here. You can access
these logs in the Trip monitor. Trip monitor is available from the More menu.
This is not a button. This line shows the current size of the trip
database, the sum of all trip and track logs saved.
Trip monitor can record statistical data of your trips. If you need these
logs later, you can let the application save them automatically for you.
INA-W910R Navigation Software Owner’s Manual
76
Track logs, the sequence of the positions given by the GPS receiver,
can be saved together with trip logs. They can later be displayed on
the map. You can let the application save the track log whenever it
saves a trip.
4.4 Trip monitor
If you save your trip logs when you arrive at some of your destinations or let the application
automatically save the trip logs for you, those logs are all listed here. Tap one of the trips to
see the trip statistics, speed and altitude profile.
If track log has also been saved, you can display it on the map with the selected colour. Track
logs can be exported to GPX files for later use.
The Trip monitor can also be accessed from the More menu.
4.5 ActiveWindow
ActiveWindow displays important navigation information in audio screens. The window can be
activated and deactivated by pressing the AUDIO hardkey in audio screens. If there is an
active route, the route information is displayed and replaced by the next turn when
approaching a turn.
The last advice can be repeated by touching the ActiveWindow area. Without a route, the
data fields are displayed and can be hidden and shown again by pressing the ActiveWindow
area.
The ActiveWindow also shows speed limit information. If speed limit warnings are set to be
displayed they will cover the window. Speed warnings can be configured to be displayed only
when speeding; please check the Navigation Owners Manual for more information. It is
possible to change from ActiveWindow mode to full screen navigation mode by pressing the
MAP or NAVI MENU hardkeys at any time. In some cases user input is required to continue
navigation: a small part of the navigation window will be displayed and, to continue, please
press the NAVI MENU hardkey to operate the navigation software. ActiveWindow is not
supported in combination with SD video and DVD player to allow full screen video playback.
INA-W910R Navigation Software Owner’s Manual
77
5 Glossary
2D/3D GPS reception
The GPS receiver uses satellite signals to calculate its (your) position and needs at least four
signals to give a three-dimensional position, including elevation. Because the satellites are
moving and because objects can block the signals, your GPS device might not receive four
signals. If three satellites are available, the receiver can calculate the horizontal GPS position
but the accuracy is lower and the GPS device does not give you elevation data: only 2D
reception is possible.
Active route
The currently navigated route. Whenever the destination is set, the route is active until you
delete it or you reach your destination. See also: Route.
City Centre
The city/town centre is not the geometric centre of the city/town but an arbitrary point the map
creators have chosen. In towns and villages, it is usually the most important intersection; in
larger cities, it is one of the important intersections.
Colour theme
Your software comes with different colour themes for daytime or night use of the map and
menu screens. Themes are custom graphic settings and they can have different colours for
streets, blocks or surface waters in 2D and 3D modes, and they display shades or shadows in
different ways in 3D mode.
One daytime scheme and one night scheme is always selected for the map and for the
menus. The software uses them when it switches from day to night and back.
GPS accuracy
Several factors have impact on the deviation between your real position and the one given by
the GPS device. For example, signal delay in the ionosphere or reflecting objects near the
GPS device have a different and varying impact on how accurately the GPS device can
calculate your position.
Map
The software works with digital maps which are not simply the computerised versions of
traditional paper maps. Similarly to the paper road maps, the 2D mode of digital maps show
you streets, roads, and elevation is also shown by colours.
In 3D mode, you can see the altitude differences, for example valleys and mountains,
elevated roads, and in selected cities 3D landmarks and 3D buildings are also displayed.
You can use digital maps interactively: you can zoom in and out (increase or decrease the
scale), you can tilt them up and down, and rotate them left and right. In GPS-supported
navigation, digital maps facilitate route planning.
INA-W910R Navigation Software Owner’s Manual
78
North-up map orientation
In North-up mode the map is rotated so its top always faces North. This is the orientation for
example in Find on Map.
Road Safety Camera
Special alert points for speed, red light or bus lane cameras. Different data sources are
available. You can configure the software to warn you when you approach one of these
cameras.
Detecting the location of Road Safety Cameras is prohibited in certain countries. It is the sole
responsibility of the driver to check whether this feature can be used during the trip.
The software is capable of showing and warning for more than just cameras. Various other
types of proximity alert points like school zones and railway crossings are also available.
Route
A sequence of route events, i.e. manoeuvres (for example, turns and roundabouts) to reach
the destination. The route contains one start point and one or more destinations. The start
point is the current (or last known) position by default. If you need to see a future route, the
start point can be replaced with any other given point.
Track-up map orientation
In Track-up mode the map is rotated so its top always points in the current driving direction.
This is the default orientation in 3D map view mode.
Vehicle marker
The current position is shown with a blue arrow on the map by default. The direction of the
blue arrow shows the current heading. This position marker can be replaced with different 3D
vehicle symbols. You can even specify different Vehicle markers for different route types
(depending on which vehicle type is selected for route calculation).
INA-W910R Navigation Software Owner’s Manual
79
6 Copyright note
The product and the information contained herein are subject to change without prior
notification.
This manual may not, in whole or in part, be reproduced or transmitted in any form either
electronically or mechanically, including photocopying and recording, without the express
written consent of Alpine Electronics, Inc.
© 2011 - Alpine Electronics, Inc
© 2011 - NAVTEQ. All rights reserved.
Albania:
© 2005 NAVTEQ. All rights reserved.
Andorra:
© 1993 NAVTEQ. All rights reserved.
Austria:
© 1996 NAVTEQ. All rights reserved.
Belarus:
© 2011 NAVTEQ. All rights reserved.
Belgium:
© 1995 NAVTEQ. All rights reserved.
Bosnia and Herzegovina: © 2005 NAVTEQ. All rights reserved.
Bulgaria:
© 2005 NAVTEQ. All rights reserved.
Croatia:
© 2005 NAVTEQ. All rights reserved.
Czech Republic:
© 2002 NAVTEQ. All rights reserved.
Denmark:
© 1997 NAVTEQ. All rights reserved.
Estonia:
© 2005 NAVTEQ. All rights reserved.
Finland:
© 2001 NAVTEQ. All rights reserved.
France:
© 1993 NAVTEQ. All rights reserved.
FYROM:
© 2011 NAVTEQ. All rights reserved.
Germany:
© 1993 NAVTEQ. All rights reserved.
Gibraltar:
© 2011 NAVTEQ. All rights reserved.
Greece:
© 2003 NAVTEQ. All rights reserved.
Hungary:
© 2004 NAVTEQ. All rights reserved.
Italy:
© 1994 NAVTEQ. All rights reserved.
Latvia:
© 2005 NAVTEQ. All rights reserved.
Liechtenstein:
© 1996 NAVTEQ. All rights reserved.
Lithuania:
© 2005 NAVTEQ. All rights reserved.
Luxembourg:
© 1996 NAVTEQ. All rights reserved.
Moldova:
© 2011 NAVTEQ. All rights reserved.
Monaco:
© 1993 NAVTEQ. All rights reserved.
Montenegro:
© 2005 NAVTEQ. All rights reserved.
Norway:
© 2001 NAVTEQ. All rights reserved.
Poland:
© 2004 NAVTEQ. All rights reserved.
Portugal:
© 1997 NAVTEQ. All rights reserved.
Ireland:
© 1993 NAVTEQ. All rights reserved.
Romania:
© 2005 NAVTEQ. All rights reserved.
Russia:
© 2005 NAVTEQ. All rights reserved.
San Marino:
© 1994 NAVTEQ. All rights reserved.
Serbia:
© 2005 NAVTEQ. All rights reserved.
Slovak Republic:
© 2002 NAVTEQ. All rights reserved.
Slovenia:
© 2004 NAVTEQ. All rights reserved.
Spain:
© 1997 NAVTEQ. All rights reserved.
Sweden:
© 1994 NAVTEQ. All rights reserved.
Switzerland:
© 1996 NAVTEQ. All rights reserved.
The Netherlands:
© 1993 NAVTEQ. All rights reserved.
Turkey:
© 2011 NAVTEQ. All rights reserved.
Ukraine:
© 2011 NAVTEQ. All rights reserved.
United Kingdom:
© 1993 NAVTEQ. All rights reserved.
Vatican City:
© 1994 NAVTEQ. All rights reserved.
All rights reserved.
INA-W910R Navigation Software Owner’s Manual
80