Eiki LC-XB27 Owner`s manual

Network Supported
MULTIMEDIA PROJECTOR
MODEL
LC-XB27
❏ Wireless LAN (optionally available)
IEEE802.11b/g
❏ Wired LAN
100-Base-TX/10-Base-T
Memory Viewer
❏ USB Memory Viewer (optionally available)
✽Refer to the owner's manuals below for details
about network and memory viewer function.
■ Owner's Manual
"Network Set-up and Operation"
■ Owner's Manual USB Memory
This manual is provided with optionally
supplied USB memory. (Model : WL-10)
OWNER’S MANUAL
2
Features and Design
This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use.
This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display
(LCD) technology.
◆
Compact Design
◆
The Logo function allows you to customize the
screen logo with the Logo functions. (p48, 49) You
can capture an image for the screen logo, choose a
logo between provided and captured.
This projector is designed compact in size and
weight. It is easy to carry and work anywhere you
wish to use.
◆
◆
Compatibility
The projector widely accepts various video and
computer input signals including; Computers, 6 Color
systems (PAL, SECAM, NTSC, NTSC4.43, PAL-M,
PAL-N), Component video, S-video and RGB scart.
◆
Simple Computer System Setting
◆
Quick Termination
◆
- The digital zoom function allows you to focus on
the crucial information during a presentation. (p38)
◆
✳ The board color is limited to Green. (p35, 42)
Multilanguage Menu Display
optionally available (Model : WL-30)
Operation menu is available in 16 languages; English,
German, French, Italian, Spanish, Portuguese, Dutch,
Swedish, Finnish, Polish, Hungarian, Romanian,
Russian, Chinese, Korean, or Japanese. (p46)
◆
LAN Network Function
This projector is loaded with Wired and Wireless
LAN* network function. You can project an image on
a computer via the network. You can also operate
and manage the projector via the network. For
details, refer to the owner's manual "Network Set-up
and Operation" supplied with this projector.
*Dedicated USB Wireless LAN adapter for Wireless operation is
- Blackboard✳ can be used as a projection screen.
◆
Security Function
The Security function helps you to ensure the
security with the Key lock (p52) and the PIN code
lock (p21, 52, 53) functions. You can lock the
operation on the projector and the remote control.
Also you can prevent unauthorized persons from
using the projector.
Useful Functions for a Presentation
- The noise reduction function helps you to reduce
the contained noise on the screen to get smoother
images. (p44)
Lamp Control
Brightness of the projection lamp can be selected.
(p51)
The AC cord can be plugged out right after turning off
the projector. (p22)
◆
Switchable Interface Terminal
The projector provides a switchable interface
terminal. You can use the terminal as computer input
or monitor output conveniently. (p50)
The projector has the Multi-scan system to conform
to almost all computer output signals quickly. (p31)
Up to UXGA resolution can be accepted.
◆
Logo Function
Power Management
The Power management function reduces power
consumption and maintains the lamp life. (p50)
✔Note:
◆
Memory Viewer Function (Optional Function)
Insert the dedicated USB memory (optionally
supplied: Model WL-10), into the projector to project
images or presentation data stored in it. You do not
have to carry a computer or other equipment for a
presentation. For details, refer to the owner's
manual provided with optionally supplied USB
memory.
• The On-Screen Menu and figures in this manual may differ slightly from the product.
• The contents of this manual are subject to change without notice.
3
Table of Contents
Features and Design . . . . . . . . . . . . . . . . . . .3
Table of Contents . . . . . . . . . . . . . . . . . . . . . .4
To the Owner . . . . . . . . . . . . . . . . . . . . . . . . .5
Safety Instructions . . . . . . . . . . . . . . . . . . . .6
Air Circulation
Installing the Projector in Proper Position
Moving the Projector
7
7
7
Compliance . . . . . . . . . . . . . . . . . . . . . . . . . .8
Part Names and Functions . . . . . . . . . . . . . .9
Front
Back
Bottom
Rear Terminal / Side Terminal
Top Control
Remote Control
Laser Pointer Function
Pointer Function
Wireless Mouse Operation
Remote Control Code
Remote Control Battery Installation
Operating Range
Adjustable Feet
9
9
9
10
11
12
13
13
14
14
15
15
15
Installation . . . . . . . . . . . . . . . . . . . . . . . . . .16
Positioning the Projector
Connecting the AC Power Cord
Connecting to a Computer
Connecting to Video Equipment
Connecting to Component Video Equipment
16
17
18
19
20
Basic Operation . . . . . . . . . . . . . . . . . . . . . .21
Turning On the Projector
Turning Off the Projector
How to Operate the On-Screen Menu
Menu Bar
Zoom and Focus Adjustment
Auto Setup Function
Keystone Correction
Sound Adjustment
Remote Control Operation
21
22
23
24
25
25
25
26
27
Computer Input
. . . . . . . . . . . . . . . . . . . . .29
Input Source Selection
(RGB : Computer 1(Analog) / Computer 2 )
Input Source Selection
(RGB(PC digital), RGB(AV HDCP))
Computer System Selection
Auto PC Adjustment
Manual PC Adjustment
Image Level Selection
Image Level Adjustment
Screen Size Adjustment
29
30
31
32
33
35
36
37
Video Input . . . . . . . . . . . . . . . . . . . . . . . . . .39
Input Source Selection (Video, S-video)
Input Source Selection
(Component, RGB Scart 21-pin)
Video System Selection
Image Level Selection
Image Level Adjustment
Screen Size Adjustment
39
40
41
42
43
45
Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Setting
46
Maintenance and Cleaning . . . . . . . . . . . . .55
Warning Indicator
Cleaning the Air Filters
Attaching the Lens Cover
Cleaning the Projection Lens
Cleaning the Projector Cabinet
Lamp Replacement
Lamp Replacement Counter
55
56
56
57
57
58
59
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . .60
Troubleshooting
Menu Tree
Indicators and Projector Condition
Compatible Computer Specifications
Technical Specifications
Optional Parts
PJ Link Notice
Configurations of Terminals
PIN Code Number Memo
60
62
64
65
66
67
68
69
70
Trademarks
Each name of corporations or products in this book is either a registered trademark or a trademark of its respective
corporation.
4
To the Owner
Before operating this projector, read this manual thoroughly
and operate the projector properly.
This projector provides many convenient features and
functions. Operating the projector properly enables you to
manage those features and maintains it in better condition for
a considerable time.
Improper operation may result in not only shortening the
product-life, but also malfunctions, fire hazard, or other
accidents.
If your projector seems to operate improperly, read this
manual again, check operations and cable connections and try
the solutions in the “Troubleshooting” section in the end of
this booklet. If the problem still persists, contact the dealer
where you purchased the projector or the service center.
CAUTION
Safety Precaution
WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
– This projector produces intense light from the projection
lens. Do not stare directly into the lens as much as
possible. Eye damage could result. Be especially careful
that children do not stare directly into the beam.
– Install the projector in a proper position. If not, it may
result in a fire hazard.
– Provide appropriate space on the top, sides and rear of the
projector cabinet for allowing air circulation and cooling the
projector. Minimum clearance must be maintained. If the
projector is to be built into a compartment or similarly
enclosed, the minimum distances must be maintained. Do
not cover the ventilation slot on the projector. Heat buildup can reduce the service life of your projector, and can
also be dangerous.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
SIDE and TOP
REAR
0.7'(20cm)
CAUTION :
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE EXCEPT LAMP REPLACEMENT.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUS
VOLTAGE CONSTITUTING A RISK OF ELECTRIC
SHOCK IS PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE ARE
IMPORTANT OPERATING AND MAINTENANCE
INSTRUCTIONS IN THE OWNER'S MANUAL WITH
THIS UNIT.
NOTE:
This symbol mark and recycle system are applied only
to EU countries and not applied to the countries in the
other area of the world.
Your EIKI product is designed and
manufactured with high quality
materials and components which can be
recycled and reused.
This symbol means that electrical and
electronic equipment, at their end-oflife, should be disposed of separately
from your household waste.
Please dispose of this equipment at your local community
waste collection/recycling centre.
In the European Union there are separate collection
systems for used electrical and electronic products.
Please help us to conserve the environment we live in!
1.5'(50cm)
3'(1m)
1.5'(50cm)
– If the projector is not to be used for an extended time,
unplug the projector from the power outlet.
CAUTION ON HANGING FROM THE CEILING
When hanging the projector from the
ceiling, clean air intake vents, air filters, or top of the projector periodically with a vacuum cleaner. If you leave
the projector without cleaning for a
long time, the dust will block the operation of the cooling function, and it
may cause a breakdown or a disaster.
DO NOT SET THE PROJECTOR IN GREASY, WET, OR
SMOKY CONDITIONS SUCH AS IN A KITCHEN TO PREVENT A BREAKDOWN OR A DISASTER. IF THE
PROJECTOR COMES IN CONTACT WITH OIL OR CHEMICALS, IT MAY BECOME DETERIORATED.
CAUTION
Not for use in a computer room as defined in the Standard for
the Protection of Electronic Computer/Data Processing
Equipment, ANSI/NFPA 75.
Ne peut être utilisé dans une salle d’ordinateurs telle que
définie dans la norme ANSI/NFPA 75 Standard for Protection
of Electronic Computer/Data Processing Equipment
READ AND KEEP THIS OWNER'S MANUAL FOR LATER
USE.
5
Safety Instructions
All the safety and operating instructions should be read before
the product is operated.
Read all of the instructions given here and retain them for later
use. Unplug this projector from AC power supply before
cleaning. Do not use liquid or aerosol cleaners. Use a damp
cloth for cleaning.
This projector should be operated only from the type of power
source indicated on the marking label. If you are not sure of
the type of power supplied, consult your authorized dealer or
local power company.
Follow all warnings and instructions marked on the projector.
Do not overload wall outlets and extension cords as this can
result in fire or electric shock. Do not allow anything to rest
on the power cord. Do not locate this projector where the
cord may be damaged by persons walking on it.
For added protection to the projector during a lightning storm,
or when it is left unattended and unused for long periods of
time, unplug it from the wall outlet. This will prevent damage
due to lightning and power line surges.
Do not attempt to service this projector yourself as opening or
removing covers may expose you to dangerous voltage or
other hazards. Refer all servicing to qualified service
personnel.
Do not expose this unit to rain or use near water... for
example, in a wet basement, near a swimming pool, etc...
Do not use attachments not recommended by the
manufacturer as they may cause hazards.
Do not place this projector on an unstable cart, stand, or table.
The projector may fall, causing serious injury to a child or
adult, and serious damage to the projector. Use only with a
cart or stand recommended by the manufacturer, or sold with
the projector. Wall or shelf mounting should follow the
manufacturer's instructions, and should use a mounting kit
approved by the manufacturers.
An appliance and cart combination should
be moved with care. Quick stops,
excessive force, and uneven surfaces
may cause the appliance and cart
combination to overturn.
Slots and openings in the back and bottom of the cabinet are
provided for ventilation, to ensure reliable operation of the
equipment and to protect it from overheating.
Unplug this projector from wall outlet and refer servicing to
qualified service personnel under the following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the projector.
c. If the projector has been exposed to rain or water.
d. If the projector does not operate normally by following the
operating instructions. Adjust only those controls that are
covered by the operating instructions as improper
adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to
restore the projector to normal operation.
e. If the projector has been dropped or the cabinet has been
damaged.
f. When the projector exhibits a distinct change in
performance-this indicates a need for service.
When replacement parts are required, be sure the service
technician has used replacement parts specified by the
manufacturer that have the same characteristics as the
original part. Unauthorized substitutions may result in fire,
electric shock, or injury to persons.
Upon completion of any service or repairs to this projector,
ask the service technician to perform routine safety checks to
determine that the projector is in safe operating condition.
The openings should never be covered with cloth or other
materials, and the bottom opening should not be blocked by
placing the projector on a bed, sofa, rug, or other similar
surface. This projector should never be placed near or over a
radiator or heat register.
Voor de klanten in Nederland
This projector should not be placed in a built-in installation
such as a book case unless proper ventilation is provided.
Never push objects of any kind into this projector through
cabinet slots as they may touch dangerous voltage points or
short out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the projector.
Do not install the projector near the ventilation duct of airconditioning equipment.
6
NL
Bij dit produkt zijn batterijen
geleverd.
Wanneer deze leeg zijn, moet u
ze niet weggooien maar inleveren
als KCA.
Safety Instructions
Air Circulation
Openings in the cabinet are provided for ventilation and
to ensure reliable operation of the product and to
protect it from overheating, and these openings must
not be blocked or covered.
Installing the Projector
in Proper Position
Install the projector properly. Improper Installation may
reduce the lamp life and cause a fire hazard.
20˚
CAUTION
Hot air is exhausted from the exhaust vent. When
using or installing the projector, the following
precautions should be taken.
– Do not put any flammable object or spray can near
the projector, hot air is exhausted from the ventilation
holes.
– Keep the exhaust vent at least 3’(1m) away from any
objects.
– Do not touch a peripheral part of the exhaust vent,
especially screws and metallic part. This area will
become hot while the projector is being used.
– Do not put anything on the cabinet. The materials
put on the cabinet will not only get damaged but also
cause fire hazard by heat.
Cooling fans are provided to cool down the projector.
The fans' running speed is changed according to the
temperature inside the projector.
Do not tilt the projector more than
20 degrees from side to side.
20˚
Do not point the projector up to
project an image.
Do not point the projector down
to project an image.
Do not put the projector on either
side to project an image.
Moving the Projector
When moving the projector, replace the lens cover and
retract the adjustable feet to prevent damage to the
lens and cabinet. When the projector is not in use for
an extended period, put it into a suitable case to protect
the projector.
When handling the projector, do not drop, bump,
subject it to strong forces or put other things on the
cabinet.
Exhaust Vent
USE CAUTION IN CARRYING OR
TRANSPORTING THE PROJECTOR
Exhaust Vent
(Hot air exhaust)
Air Intake
Vent
Air Intake
Vent
–Do not drop or bump the projector, otherwise damages
or malfunctions may result.
–When carrying the projector, use a suitable carrying
case.
–Do not transport the projector by using a courier or
transport service in an unsuitable transport case. This
may cause damage to the projector. To transport the
projector through a courier or transport service, consult
your dealer for their information.
– Do not put the projector in a case before the projector
is cooled enough.
Exhaust Vent
(Hot air exhaust)
7
Compliance
Federal Communication Commission Notice
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures :
–
–
–
–
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or modifications
should be made, you could be required to stop operation of the equipment.
Model Number
Trade Name
Responsible party
Address
: LC-XB27
: EIKI
: EIKI International, Inc.
: 30251 Esperanza Rancho Santa Margarita CA 92688-2132
Telephone No.
: 800-242-3454 (949-457-0200)
AC Power Cord Requirement
The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it.
AC Power Cord for the United States and Canada :
AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and
certified by the Canadian Standard Association (CSA).
AC Power Cord has a grounding-type AC line plug. This is a safety feature to be sure that the plug will fit into
the power outlet. Do not try to defeat this safety feature. Should you be unable to insert the plug into the
outlet, contact your electrician.
THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY ACCESSIBLE.
8
GROUND
Part Names and Functions
Part Names and Functions
Front
q
w
e
r
t
y
USB Terminal
LAN Connection Terminal
Zoom Lever
Projection Lens
Focus Ring
Lens Cover
(See page 56 for attaching.)
u Infrared Remote Receiver
q
Back
!7
e
w
i
r t
y
o !0
u
!7
!1
!2
i Top Controls and Indicators
o Speaker
!0 Air Intake Vent
!1 Power Cord Connector
!2 Terminals and Connectors
!3 Lamp Cover
!4 Air Intake Vents (back and bottom)
!5 Air Filters
!6 Adjustable Feet
!7 Exhaust Vents
CAUTION
Hot air is exhausted from the exhaust
vent. Do not put heat-sensitive objects
near this side.
✔Note:
Bottom
!3
!4
!5
q USB Terminal and w LAN Connection
Terminal are for the Network function. Refer
to the owner's manual "Network Set-up and
Operation" supplied with this projector or the
owner's manual of Memory viewer
(optionally available).
!7
!6
9
Part Names and Functions
Rear Terminal / Side Terminal
✽
q
w
e
r
t
y
u
!0
!1
(VARIABLE)
RESET
USB
SERVICE PORT
COMPUTER IN 1
DVI-I
COMPUTER IN 2
/ COMPONENT IN
R
AUDIO OUT
L
COMPUTER /
COMPONENT
MONITOR OUT
VIDEO IN
S-VIDEO IN
(MONO)
AUDIO IN
USB
Rear Terminal
o
i
Side Terminal
q USB (Series B)
In order to operate the computer with the remote
control and use the PAGE ed buttons on the
remote control during a presentation, connect the
USB port of the computer to the USB terminal
with a USB cable. (p12, 18)
y AUDIO IN
w SERVICE PORT
This jack is used to service the projector.
u AUDIO OUT(VARIABLE)
e COMPUTER IN 1 / DVI-I
Connect computer output (Digital / Analog DVI-I
type) to this terminal. (p18)
Connect the audio output from video equipment
connected to t or o to this jack. (When the audio
output is monaural, connect it to L (MONO) jack.)
(p19)
Connect an external audio amplifier to this jack.
(p18- 20)
This terminal outputs sound from AUDIO IN
terminal (y or i).
i COMPUTER/ COMPONENT AUDIO IN
r COMPUTER IN 2 /COMPONENT IN /
MONITOR OUT
This terminal is switchable and can be used for
input from a computer, video equipment
(Component or RGB Scart) or output to the other
monitor. Optional cables are required when using
this terminal as component input or RGB Scart 21Pin Video input. (p69)
Set the terminal up as either Computer input or
Monitor output properly. (Used for Monitor out,
this terminal outputs only incoming signal from
COMPUTER IN 1 / DVI-I terminal.) (p18, 20, 50)
t S-VIDEO IN
Connect the S-VIDEO output from video
equipment to this jack. (p19)
Connect the audio output (stereo) from a computer
or video equipment connected to e or r to this
jack. (p18, 20)
o VIDEO IN
Connect the composite video output from video
equipment to VIDEO jack. (p19)
!0 USB (Series A)
Connect optionally supplied USB Wireless LAN
Adapter or USB memory for Memory viewer
operation. (Refer to the owner's manual supplied
with optionally available USB memory.)
!1 LAN connection
Connect the LAN cable. (Refer to the owner's
manual "Network Set-up and Operation" supplied
with this projector.)
✽ RESET button
A built-in micro processor which controls this unit may
occasionally malfunction and need to be reset. This can be
done by pressing the RESET button with a pen, which will shut
down and restart the unit. Do not use the RESET function
excessively.
10
Part Names and Functions
q
w
e
r t
y
u
Part Names and Functions
Top Control
i
POWER WARNING LAMP REPLACE
TO
AU
UP
FF
-O
T
SE
T
PU
IN
U
EN
M
N
O
CT
LE
SE
+
E
M
LU
VO
E
M
LU
O
-V
o
q SELECT button
– Execute the selected item. (p23)
– Expand or compress the image in Digital zoom
mode. (p38)
y WARNING indicator
Emit a red light when the projector detects
abnormal condition. This also blinks red when the
internal temperature of the projector exceeds the
operating range. (p55, 64)
w POWER ON–OFF button
Turn the projector on or off. (p21, 22)
e MENU button
u LAMP REPLACE indicator
Turn yellow when the life of the projection lamp
draws to an end. (p58, 64)
Open or close the On-Screen Menu. (p23)
r POWER indicator
Emit a red light until the projector gets ready to be
turned on. It turns red when the projector is in the
stand-by mode. It remains green while the
projector is under operation. (p21, 22, 64)
t INPUT button
Select input source. (p29, 30, 39, 40)
i AUTO SETUP button
Correct vertical keystone distortion and adjust
computer display parameters including Fine sync.,
Total dots and Picture position. (p25, 46)
o POINT (ed7 8 ) buttons
– Select an item or adjust the value in the OnScreen Menu. (p23)
– Pan the image in Digital zoom + mode. (p38)
– Adjust the volume level. (Point 7 8 buttons)
(p26)
11
Part Names and Functions
Remote Control
q L-CLICK button
Act as left click for wireless mouse operation. (p14)
w POWER ON-OFF button
Turn the projector on or off. (p21, 22)
e SIGNAL EMISSION indicator
q
This indicator lights red while the laser beam is being emitted from the laser
light window or a signal is being sent from the remote control to the projector.
r VIDEO button
Select VIDEO input source. (p39)
t COMPUTER button
Select COMPUTER input source. (p29, 30, 40)
y AUTO PC button
Automatically adjust the computer image to its optimum setting. (p27, 32, 46)
w
e
u KEYSTONE button
Correct the keystone distortion. (p25, 27, 47)
i Point ed 7 8 ( VOLUME + / – ) buttons
– Select an item or adjust the value in the On-Screen Menu. (p23)
– Pan the image in Digital zoom + mode. (p38)
– Adjust the volume level. (Point 7 8 buttons) (p26)
r
t
@4
o MENU button
y
@3
!0 FREEZE button
u
Open or close the On-Screen Menu. (p23)
Freeze the picture. (p27)
!1
LASER button
– Operate the Laser pointer function. Laser beam is emitted while pressing this
button within 1 minute. When using this laser pointer for more than 1 minute,
release the LASER button and press it again. (p13)
– Display the Pointer on the screen. (p13)
!2
PAGE ed buttons
Scroll back and forth pages on the screen when giving a presentation. Connect
the projector and your computer with a USB cable to use these buttons. (p10, 18)
i
@2
@1
!3 LAMP CONTROL button
Select the lamp mode. (p27, 51)
o
@0
!0
!1
!9
!8
!2
!7
!3
!6
!4 D.ZOOM ed buttons
Zoom in and out the images. (p27, 38)
!5 RESET/ON/ALL-OFF switch
When using the remote control, set this switch to “ON.” Set it to “ALL OFF” for
power saving when it is not used. Slide this switch to "RESET" to initialize the
remote control code or switch Spotlight and Pointer back to Laser pointer. (p13, 14)
!6 IMAGE button
Select the image level. (p28, 35, 42)
!7 MUTE button
Mute the sound. (p 26)
!4
!8 P-TIMER button
Operate the P-timer function. (p28)
!9 NO SHOW button
Temporarily turn off the image on the screen. (p28)
!5
@0 R-CLICK button
Act as right click for wireless mouse operation. (p14)
@1 SELECT button
To ensure safe operation, please
observe the following precautions :
– Do not bend, drop the remote control or
expose the remote control to moisture or
heat.
– For cleaning, use soft dry cloth. Do not apply
benzene, thinner, splay or any chemical
material.
12
– Execute the selected item. (p23)
– Expand or compress the image in Digital zoom mode. (p38)
@2 PRESENTATION POINTER button
Move a pointer of the projector or a pointer for wireless mouse operation. (p13.14)
@3 AUTO SET button
Correct vertical keystone distortion and adjust PC display parameters. (p25, 46)
@4 NETWORK button
Select network input or Memory viewer input. Refer to the owner's manual
"Network Set-up and Operation" supplied with this projector or the owner's
manual of Memory viewer (optionally available).
Part Names and Functions
Part Names and Functions
Laser Pointer Function
This remote control emits a laser beam from the laser light window. With the LASER button pressed, laser light
goes on. The signal emission indicator lights red and laser is emitted with red light. With the LASER button
pressed for more than 1 minute or released, the light goes off.
The laser emitted is a class II laser. Do not look into the laser light window or shine the laser beam on yourself
or other people. Below are the caution labels for laser beam.
CAUTION :
Use of controls, adjustments or performance of procedures other than those specified herein
may result in hazardous radiation exposure. Do not look into the laser light window while laser
is emitted, otherwise eye damage may result.
These caution labels are put on the remote control.
Signal Emission Indicator
Laser Light Window
Pointer Function
You can move Spotlight or Pointer of the projector with the remote control to emphasize a part of the projected
image.
1
2
3
With pressing the MENU button, hold down the NO
SHOW button for more than 10 seconds so that the
Pointer function will be available. (The Laser pointer
has switched to the Pointer.)
Press the LASER button on the remote control toward
the projector. Spotlight or Pointer is displayed on the
screen with the LASER button lighting green. Then
move the Spotlight or Pointer with the
PRESENTATION POINTER button. If the LASER
button does not light green and still emits laser beam,
try the procedure above until the LASER button lights
green.
To clear the Spotlight or Pointer out the screen, press
the LASER button toward the projector and see if the
LASER button lighting turns off.
To switch back to the Laser pointer again, hold down
the NO SHOW button with pressing the MENU button
for more than 10 seconds or slide the RESET/ON/ALLOFF switch to "RESET". (p12) When you reset the
Pointer function, the remote control code will be reset,
as well.
Spotlight
Pointer
PRESENTATION POINTER button
MENU button
NO SHOW button
While pressing the MENU
button, hold down the NO
SHOW button for more than 10
seconds.
PRESENTATION POINTER button
LASER button
After the Laser pointer has
switched to the Pointer, use
the LASER button as the
Pointer function ON-OFF
switch. Press the LASER
button toward the projector and
see if it lights green.
✔Note:
You can choose the size of Spotlight (Large, Middle, and Small) and
the pattern of Pointer (Arrow, Finger, and Dot) in the Setting Menu.
See “Pointer” on page 51.
13
Part Names and Functions
Wireless Mouse Operation
The remote control can be used as a wireless mouse for your computer. Before operating the wireless mouse,
connect your computer and the projector with the supplied USB cable. (See page 18 for connection.)
When the Pointer function is used, the wireless mouse is not available.
PRESENTATION
button
POINTER
Move the pointer on the
screen with this button.
R-CLICK button
L-CLICK button
Acts as left click while the
projector and a computer are
connected with a USB cable.
Acts as right click while the
projector and a computer are
connected with a USB cable.
Remote Control Code
This projector has eight different remote control codes (Code 1-Code 8). Switching remote control codes
prevents remote control interference when operating several projectors or video equipment at the same time.
Change the remote control code for the projector first before changing that for the remote control. See
“Remote control” in Setting on page 51.
1
With holding down the MENU button, press the
IMAGE button. The code switches sequentially for
one pressing the IMAGE button. (See the list below.)
2
To initialize the remote control code, slide the
RESET/ON/ALL-OFF switch to RESET, and then to ON.
The initial code is Code 1.
Code 1
Number of Times of
Pressing IMAGE
Button
1
Code 2
2
Code 3
3
Code 4
4
Code 5
5
Code 6
6
Code 7
7
Code 8
8
Remote Control Code
14
While pressing the MENU
button, press the IMAGE
button number of times
corresponding to the
remote control code.
MENU button
IMAGE button
Part Names and Functions
Part Names and Functions
Remote Control Battery Installation
1
Open the battery
compartment lid.
2
Slide the batteries into
the compartment.
Press the lid
downward and slide it.
3
Replace the
compartment lid.
Two AAA size
batteries
For correct polarity (+
and –), be sure
battery terminals are
in contact with pins
in compartment.
To insure safe operation, please observe the following precautions :
●
●
●
●
●
●
●
●
●
Use (2) AAA,UM-04 or LR03 type alkaline batteries.
Always replace batteries in sets.
Do not use a new battery with a used battery.
Avoid contact with water or liquid.
Do not expose the remote control to moisture, or heat.
Do not drop the remote control.
If the battery has leaked on the remote control, carefully wipe case clean and install new batteries.
Risk of an explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
Operating Range
16.4’
(5 m)
Point the remote control toward the projector (Infrared
Remote Receiver) whenever pressing any button.
Maximum operating range for the remote control is about
16.4’ (5m) and 60° in front of the projector.
60°
Remote control
Adjustable Feet
Projection angle can be adjusted up to 10.0 degrees with
the adjustable feet.
1
Lift the front of the projector and pull upward the feet
lock latches on both sides of the projector.
2
Release the feet lock latches to lock the adjustable
feet and rotate the adjustable feet to adjust the
position and tilt.
3
Keystone distortion of the projected image can be
adjusted automatically with Auto setup function or
manually with the remote control or the menu
operation. (p25, 46, 47)
Feet Lock Latches
Adjustable Feet
15
Installation
Positioning the Projector
For projector positioning, see the figures below. The projector should be set horizontally to the flat screen.
✔Note:
• The brightness in the room has a great influence on picture quality.
It is recommended to limit ambient lighting in order to obtain the best image.
• The values shown below are approximate and may vary from the actual sizes.
(Inch Diagonal)
38.7' (11.8m)
A:B = 6:1
300
Max. Zoom
16.4' (5m)
12.5' (3.8m)
Min. Zoom
200
250
8.2' (2.5m)
150
3.3' (1.0m)
100
40
A
166
126
83
(Center)
B
USB
16
Screen Size
(W x H) mm
4 : 3 aspect ratio
40”
100”
150”
200”
300”
813 x 610
2032 x 1524
3048 x 2286
4064 x 3048
6096 x 4572
Zoom (min)
5.2' (1.6m)
12.8' (3.9m)
19.4' (5.9m)
25.9' (7.9m)
38.7' (11.8m)
Zoom (max)
3.3' (1.0m)
8.2' (2.5m)
12.5' (3.8m)
16.4' (5m)
24.9' (7.6m)
Installation
Connecting the AC Power Cord
This projector uses nominal input voltages of 100-120 V or
200-240 V AC. This projector automatically selects the
correct input voltage. It is designed to work with singlephase power systems having a grounded neutral conductor.
To reduce the risk of electrical shock, do not plug into any
other type of power system.
Consult your authorized dealer or service station if you are
not sure of the type of power being supplied.
Connect the projector with all peripheral equipment before
turning the projector on. (See page 18-20 for connection.)
CAUTION
Connect the AC power cord (supplied) to the
projector.
The AC outlet must be near this equipment and
must be easily accessible.
Installation
For safety, unplug the AC power cord when the projector
is not in use. When this projector is connected to an
outlet with the AC power cord, it is in Stand-by mode and
consumes a little electric power.
NOTE ON THE POWER CORD
AC power cord must meet requirement of the country where you use the projector.
Confirm the AC plug type with the chart below and proper AC power cord must be used.
If supplied AC power cord does not match your AC outlet, contact your sales dealer.
Projector side
AC outlet side
For the U.S.A. and Canada
For Continental Europe
For the U.K.
Ground
To power cord
connector on your
projector.
To the AC outlet.
(120 V AC)
To the AC outlet.
(200 - 240 V AC)
To the AC outlet.
(200 - 240 V AC)
17
Installation
Connecting to a Computer
Cables used for connection
• VGA Cable (Mini D-sub 15 pin) ✽
•DVI-VGA Cable
•USB Cable
• Audio Cables ✽
(✽ = Not supplied with this projector.)
Audio Output
USB port
Monitor Output
Monitor Output
or
Monitor Input
External Audio Equipment
Audio Input
USB cable
Audio cable
(stereo) ✽
DVI-VGA cable
VGA cable ✽
Audio cable ✽
(stereo)
COMPUTER IN 1/ COMPUTER IN 2
/COMPONENT IN
DVI-I
/MONITOR OUT
USB
This terminal is switchable. Set up the
terminal as either Computer input or
Monitor output. (See Page 50.)
(VARIABLE)
RESET
USB
SERVICE PORT
COMPUTER IN 1
DVI-I
AUDIO OUT
R
COMPUTER IN 2
/ COMPONENT IN
MONITOR OUT
VIDEO IN
S-VIDEO IN
L
(MONO)
AUDIO OUT
(stereo)
COMPUTER /
COMPONENT
AUDIO IN
COMPUTER/
COMPONENT
AUDIO IN
✔Note:
•Input sound to the COMPUTER / COMPONENT AUDIO IN
terminal when using the COMPUTER IN 1 / DVI-I and the
COMPUTER IN 2 / COMPONENT IN / MONITOR OUT terminal
as input.
• When connecting the AUDIO OUT to external audio equipment,
the projector's built-in speaker is disconnected.
ON
• When the cable is of the longer variety, it ON
is advisable
to use the
COMPUTER IN 1 / DVI-I and not the COMPUTER IN 2 /
COMPONENT IN / MONITOR OUT.
• USB cable connection is needed when operating the computer with
the remote control or using the PAGE ed buttons on the remote
control.
18
When connecting the cable, the power
cords of both the projector and the
external equipment should be
disconnected from AC outlet.
Installation
Connecting to Video Equipment
Cables used for connection
• Video and Audio Cable (RCA x 3) ✽
• S-VIDEO Cable ✽
• Audio Cable ✽
(✽ = Not supplied with this projector.)
Installation
S-video Output
Composite Video and Audio Output
(R)
(L)
(Video)
External Audio Equipment
S-video cable ✽
Video and audio cable✽
Audio Input
(Video)
(R) (L)
AUDIO IN VIDEO
S-VIDEO
Audio cable ✽
(stereo)
(VARIABLE)
RESET
USB
SERVICE PORT
COMPUTER IN 1
DVI-I
AUDIO OUT
R
COMPUTER IN 2
/ COMPONENT IN
AUDIO OUT
(stereo)
MONITOR OUT
L
VIDEO IN
S-VIDEO IN
(MONO)
✔Note:
When connecting AUDIO OUT to external audio equipment, the
projector's built-in speaker is disconnected.
COMPUTER /
COMPONENT
AUDIO IN
When connecting the cable, the power
cords of both the projector and the
external equipment should be
disconnected from AC outlet.
19
Installation
Connecting to Component Video Equipment
Cables used for connection
• Audio Cables ✽
• Scart-VGA Cable ✽
• Component Cable ✽
• Component-VGA Cable ✽
(✽ = Not supplied with this projector.)
Audio Output
RGB Scart 21pin Output
Component Video Output
(Y, Pb/Cb, Pr/Cr)
Component
cable✽
Audio cable ✽
(stereo)
External Audio Equipment
Scart-VGA
cable ✽
Component-VGA
cable✽
Audio Input
COMPUTER IN 2
/COMPONENT IN /MONITOR OUT
This terminal is switchable. Set up the
terminal as either Computer input or
Monitor output. (See Page 50.)
(VARIABLE)
RESET
USB
SERVICE PORT
COMPUTER IN 1
DVI-I
AUDIO OUT
(stereo)
AUDIO OUT
R
COMPUTER IN 2
/ COMPONENT IN
Audio cable ✽
(stereo)
MONITOR OUT
VIDEO IN
S-VIDEO IN
L
(MONO)
COMPUTER /
COMPONENT
AUDIO IN
COMPUTER/
COMPONENT
AUDIO IN
✔Note:
• When connecting AUDIO OUT to external audio equipment, the
projector's built-in speaker is disconnected.
• See p67 for ordering optional parts.
20
When connecting the cable, the power
cords of both the projector and the
external equipment should be
disconnected from AC outlet.
Basic Operation
Turning On the Projector
1
Complete peripheral connections (with a computer,
VCR, etc.) before turning on the projector.
2
Connect the projector's AC power cord into an AC
outlet. The POWER indicator will be red.
3
Press the POWER ON-OFF button on the top control
or on the remote control. The POWER indicator will
become green and the cooling fans will start to
operate. The preparation display will appear on the
screen and the count down will start.
4
If the projector is locked with a PIN code, PIN code
Input Dialog Box will appear. Enter the PIN code as
instructed below.
Enter a PIN code
The preparation display will disappear
after 30 seconds.
Selected Input Source and Lamp Mode
Lamp mode
(See page 51 for Lamp mode.)
PIN Code Input Dialog Box
Pointer
Select a number by pressing the Point 7 8 buttons and fix
the number with the SELECT button. The number will
change to "✳". If you fixed an incorrect number, move the
pointer to "Set" or "Clear" once by pressing the Point d
button, then return to "PIN code". Enter the correct number
again.
Repeat this step to complete entering a four-digit number.
"1234" is set as the initial PIN code at the factory.
When the four-digit number is fixed, the pointer will
automatically move to "Set". Press the SELECT button so
that you can start to operate the projector.
If you entered an incorrect PIN code, "PIN code" and the
number (✳✳✳✳) will turn red and disappear. Enter the
correct PIN code all over again.
What is PIN code?
PIN code is a security code using Personal Identification
Number that allows the person who knows it to operate the
projector. Setting PIN code prevents others except the
specific users from operating the projector.
A PIN code consists of a four-digit number. Refer to PIN
code lock function in Setting on page 52, 53 for locking
operation of the projector with your PIN code.
Installation
After the countdown, the input source that was
selected last and the Lamp mode status icon (see
page 51) will appear on the screen.
16
After the OK icon disappears,
you can operate the projector.
✔Note:
•When the Logo select function is off, the logo will
not be shown on the screen. (p48)
•When the "Countdown off" or "Off" is selected in
the Display function, the countdown will not be
shown on the screen. (p47)
• During the countdown period, all operations are
invalid.
• If the correct PIN code number is not input for 3
minutes after the PIN code dialog box appeared,
the projector will be turned off automatically.
CAUTION ON HANDLING PIN CODE
If you forget your PIN code, the projector can no
longer be started. Set a new PIN code with
special care, write it down in column on page 70
of this manual, and keep it at hand. Should the
PIN code be missing or forgotten, consult your
dealer or service center.
21
Basic Operation
Turning Off the Projector
1
Press the POWER ON-OFF button on the top control
or on the remote control, and a message "Power off?"
will appear on the screen.
2
Press the POWER ON-OFF button again to turn off the
projector. The POWER indicator will start to blink red,
and the cooling fans will keep operating. (You can
select the level of fun quietness and rotation speed.
See page 54.) At this time you can disconnect the AC
power cord even if the fans are still running.
3
When the projector has cooled down enough to be
turned on again, the POWER indicator will be red.
TO MAINTAIN THE LIFE OF THE LAMP, ONCE
YOU TURN THE PROJECTOR ON, WAIT AT
LEAST 5 MINUTES BEFORE TURNING IT OFF.
✔Note:
•When the On start function is on, this projector will be turned on
automatically by connecting the AC power cord to an AC outlet.
(p51)
•Do not operate the projector continuously without rest. Continuous
use may result in shortening the lamp life. Turn off the projector
and give it a rest about an hour in every 24 hours.
•The running speed of cooling fans is changed according to the
temperature inside the projector.
•Do not put the projector in a case before the projector is cooled
enough.
•If the WARNING indicator blinks or emits a red light, see "Warning
Indicator" on page 55.
•While the POWER indicator is blinking, lamp is being cooled down
and the projector cannot be turned on. Wait until the POWER
indicator becomes red to be turned on again.
•For assisting the cooling fans' operation, the projector is equipped
with a large capacitor. While the projector is operating, the
capacitor charges electricity. When disconnecting the AC plug from
AC outlet, cooling fans start to run about 1 minutes until the
capacitor is discharged.
22
The message will disappear after 4 seconds.
Basic Operation
How to Operate the On-Screen Menu
The projector can be adjusted or set via the On-Screen
Menu. Refer to the following pages regarding each
adjustment and setting procedures.
TO
AU
T
SE
UP
+
E
M
LU
VO
To close the On-Screen Menu, press the MENU
button again .
T
PU
IN
Press the SELECT button to show the item data. To
adjust the data, press the Point 7 8 buttons. Refer to
the following pages for each adjustment.
POINT buttons
E
M
LU
O
-V
3
MENU button
CT
LE
SE
Press the Point 7 8 buttons to select a Menu icon to
adjust and press the Point ed buttons to select an
item to adjust.
FF
-O
2
U
EN
M
Press the MENU button to display the On-Screen
Menu.
POWER WARNING LAMP REPLA
N
O
1
Top Control
SELECT button
Remote Control
POINT buttons
✔Note:
The selected item is not active until the SELECT button is pressed.
SELECT button
Basic Operation
MENU button
Menu icon
On-Screen Menu
Menu bar
Pointer
(red framed )
Pointer (red framed )
Press the Point ed buttons
to move the pointer.
Item
SELECT
button
Item data
Press the Point 7 8
buttons to adjust the
value.
Quit
Exit this menu.
23
Basic Operation
Menu Bar
For detailed functions, see Menu Tree on p62, 63.
For computer source
Guide Window
PC System Menu
Image Select Menu
Screen Menu
Show the selected
Menu of the OnScreen Menu.
Used to select
computer
system. (p31)
Used to select an image
level among Dynamic,
Standard, Real,
Blackboard(Green), and
Image 1 ~ 4. (p35)
Used to adjust size Used to set the
of image. [Normal / projector's operating
True / Wide / Full
configurations.
screen / Digital
(p46-54)
zoom +/–] (p37, 38)
Setting Menu
Input Menu
PC Adjust Menu
Image Adjust Menu
Sound Menu
Wired Menu
Used to select
input source either
Computer or Video.
(p29, 30)
Used to adjust
parameters to match
with input signal
format. (p32-34)
Used to adjust computer
image.
[Contrast / Brightness /
Color temp. / White balance
(R/G/B) / Sharpness /
Gamma] (p36, 37)
Used to adjust
the volume or
mute the sound.
(p26)
Used to set the WIred
LAN operating
configurations. Refer
to the owner's manual
"Network Set-up and
Operation" supplied
with this projector.
For video source
Input Menu
Image Select Menu
Screen Menu
Used to select input
source either Video
or Computer.
(p39, 40)
Used to select an image level
among Dynamic, Standard,
Cinema, Blackboard(Green)
and Image 1 ~ 4. (p42)
Used to set size of
image to Normal or
Wide. (p45)
Same function as
menu for computer
source.
24
AV System Menu
Image Adjust Menu
Used to select
system of
selected video
source. (p41)
Used to adjust picture image.
[Contrast / Brightness / Color /
Tint / Color temp. / White
balance (R/G/B) / Sharpness /
Gamma / Noise reduction /
Progressive ] (p43, 44)
Same function as
computer menu.
Basic Operation
Zoom and Focus Adjustment
Rotate the Zoom Lever to zoom in and out.
Rotate the Focus Ring to adjust the projected picture focus.
Zoom Lever
Focus Ring
Auto Setup Function
T
SE
Basic Operation
TO
AU
T
PU
IN
UP
POINT ed buttons
+
E
M
LU
VO
E
M
LU
O
-V
If a projected picture still has keystone distortion after
pressing the AUTO SETUP button on the top control or the
AUTO SET button on the remote control, correct the image
manually as follows:
CT
LE
SE
Keystone Correction
POWER WARNING LAMP REPLACE
FF
-O
• Auto Keystone corrects vertical distortion only, not correct
horizontal distortion.
• Auto Keystone cannot work when Ceiling feature is On in the
Setting menu. (p50)
• Perfect correction of the image distortion cannot be ensured with
the Auto setup function. If the distortion cannot be corrected
properly by pressing the AUTO SETUP/ AUTO SET button, adjust
manually by pressing the KEYSTONE button on the remote control
or selecting Keystone in the Setting menu. (p25, 47)
AUTO SET UP
button
U
EN
M
✔Note:.
Top Control
N
O
Auto setup function is provided to automatically correct
Keystone distortion according to the projector's tilt and
adjust the computer display parameters (Fine sync, Total
dots and Picture position) by just pressing the AUTO SETUP
button on the top control or the AUTO SET button on the
remote control. The operational setup for the Auto setup
can be changed in the Setting menu.
Refer to p46 on setting of the Auto setup function.
Remote Control
KEYSTONE button
AUTO SET button
POINT ed buttons
Press the KEYSTONE button on the remote control.
The keystone dialog box will appear.
Correct keystone distortion by pressing the Point ed
buttons. Keystone adjustment can be memorized. (p47)
Reduce the upper width
with Point e button.
Reduce the lower width
with Point d button.
• The arrows are white when there is no correction.
• The direction of the arrow being corrected turns red.
• The arrows disappear at the maximum correction.
• If you press the KEYSTONE button on the remote
control once more while the keystone dialog box is
being displayed, the keystone adjustment will be
canceled.
25
Basic Operation
Sound Adjustment
Direct Operation
+
E
M
LU
VO
Mute
VOLUME+/buttons
E
M
LU
O
-V
Press the VOLUME+/– buttons on the top control or on the
remote control to adjust the volume. The volume dialog
box will appear on the screen for a few seconds.
CT
LE
SE
Volume
Top Control
Remote Control
VOL- button
Press the MUTE button on the remote control to cut off the
sound. To restore the sound to its previous level, press the
MUTE button again or press the VOLUME+/– buttons.
Mute function is also effective for AUDIO OUT jack.
VOL+ button
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Press the Point 7 8 buttons to move the red
framed pointer to the Sound Menu icon.
2
Press the Point ed buttons to move the red framed
pointer to the item that you want to select, and then
press the SELECT button.
MUTE button
Approximate level
of the volume.
Volume
Press the Point 8 button to turn up the volume, and press
the Point 7 button to turn down the volume.
Mute
Press the Point 7 8 buttons to cut off the sound. Dialog
box display will be changed to “On” and the sound will be
cut off. To restore the sound to its previous level, press the
Point 7 8 buttons again.
26
Press the MUTE button to set the Mute function
On or Off. The display will disappear after 4
seconds.
Sound Menu
Sound Menu
icon
Approximate level of
the volume.
Exit the Sound Menu.
Basic Operation
Remote Control Operation
For some frequently used operations, using the remote control is advisable.
Just pressing one of the buttons enables you to make the operation, and no need for calling up the On-Screen
Menu.
COMPUTER / VIDEO / NETWORK button
Press the COMPUTER, VIDEO, or NETWORK button on the
remote control to select the input source.
For more detail, see p29, 30, 39, 40. For Network input,
refer to the owner's manual "Network Set-up and
Operation" supplied with this projector or the owner's
manual of Memory viewer (optionally available).
Remote Control
COMPUTER/VIDEO
/NETWORK button
AUTO PC
button
AUTO SET button
(See p25)
FREEZE button
POINT ed buttons
Press the FREEZE button on the remote control to freeze
the picture on the screen. To cancel the Freeze function,
press the FREEZE button again or press any other button.
AUTO PC button
D.ZOOM
buttons
FREEZE button
LAMP
CONTROL
button
Basic Operation
Press the AUTO PC button on the remote control to operate
the Auto PC function.
For more detail, see p32.
KEYSTONE button
(See p25)
D.ZOOM buttons
Press the D.ZOOM buttons on the remote control to zoom
in and zoom out the images.
For more detail, see p38.
✔Note:
See the next page for the other buttons.
LAMP CONTROL button
Press the LAMP CONTROL button on the remote control to
select the lamp mode for changing the brightness of the
screen.
Normal ....normal brightness
Auto ........brightness according with the input signal
Eco ..........lower brightness reduces the lamp
power consumption and extends the
lamp life.
KEYSTONE button
For detail, see p25.
AUTO SET button
For detail, see p25.
27
Basic Operation
NO SHOW button
Press the NO SHOW button on the remote control to black
out the image. To restore to normal, press the NO SHOW
button again or press any other button. When a projected
image is captured and set as “User” in the Logo selection
(p48), the screen changes each time you press the NO
SHOW button as follows.
black out ➜ the captured image ➜ normal ➜
The message will disappear after 4 seconds.
•••••
P-TIMER button
Press the P-TIMER button on the remote control. The timer
display “00 : 00” will appear on the screen and the timer
will start to count time (00 : 00 ~ 59 : 59).
To stop the P-Timer, press the P-TIMER button. Press the
P-TIMER button again, then the P-timer display will
disappear.
IMAGE button
P-Timer display
Remote Control
Press the IMAGE button on the remote control to select a
desired image level of the screen.
For more detail, see p35, 42.
NO SHOW
button
P-TIMER button
IMAGE button
✔Note:
See the previous page for the other buttons.
28
Computer Input
Input Source Selection (RGB : Computer 1(Analog) / Computer 2 )
Direct Operation
INPUT button
INPUT button
POWER WARNING LA
T
AU
T
PU
IN
U
EN
M
N
O
FF
-O
CT
LE
SE
Choose either Computer 1(Analog) or Computer 2 by
pressing the INPUT button on the top control or press the
COMPUTER button on the remote control.
Before using these buttons, correct input source should be
selected through Menu operation as described below.
Top Control
Computer 1
(Analog/Digital)
Computer 2
✳
Video
Wired
Remote Control
COMPUTER button
COMPUTER button
Computer 1
(Analog/Digital)
Computer 2
✳
✳ See Note at the bottom of this page.
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Press the Point 7 8 buttons to move the red
framed pointer to the Input Menu icon.
Press the Point ed buttons to move the red arrow
pointer to either Computer 1(Analog) or Computer 2,
and then press the SELECT button.
3
When selecting Computer 1(Analog), RGB input
source will be selected directly.
When selecting Computer 2, the Source Select Menu
will appear. Move the pointer to RGB and then press
the SELECT button.
Input Menu icon
Move the pointer
(red arrow) to
Computer 1
(Analog) and press
the SELECT button.
Input Menu icon
Computer Input
2
Input Menu
Input Menu
Move the pointer
(red arrow) to
Computer 2 and
press the SELECT
button.
✔Note:
•Computer 2 is not displayed when the COMPUTER IN 2 /
COMPONENT IN / MONITOR OUT terminal is set as Monitor out.
(p50)
•Computer 2 (COMPUTER IN 2 / COMPONENT IN /MONITOR
OUT) can accept only RGB signal.
•Wired, Wireless, and Memory Viewer are for the Network function.
Refer to the owner's manual "Network Set-up and Operation"
supplied with this projector or the owner's manual of Memory
viewer (optionally available).
Computer
2
Move the pointer
(red arrow) to RGB.
29
Computer Input
Input Source Selection (RGB(PC digital), RGB(AV HDCP))
Direct Operation
INPUT button
INPUT button
POWER WARNING LA
T
AU
T
PU
IN
U
EN
M
N
O
FF
-O
CT
LE
SE
Choose Computer 1(Digital) by pressing the INPUT button
on the top control or press the COMPUTER button on the
remote control.
Before using these buttons, correct input source should be
selected through Menu operation as described below.
Top Control
Computer 1
(Analog/Digital)
Computer 2
✳
Video
Wired
Remote Control
COMPUTER button
COMPUTER button
Computer 1
(Analog/Digital)
Computer 2
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Press the Point 7 8 buttons to move the red
framed pointer to the Input Menu icon.
2
Press the Point ed buttons to move the red arrow
pointer to Computer 1(Digital), and then press the
SELECT button.
3
After the Source Select Menu appeared for Computer
1(Digital), move the pointer to RGB (PC digital) or RGB
(AV HDCP) and then press the SELECT button.
✔Note:
•Computer 2 is not displayed when the COMPUTER IN 2 /
COMPONENT IN / MONITOR OUT terminal is set as Monitor out.
(p50)
•Computer 2 (COMPUTER IN 2 / COMPONENT IN / MONITOR
OUT) can accept only RGB signal.
•HDCP (High-bandwidth Digital Content Protection) is a system for
protecting digital entertainment content delivered by DVI (Digital
Visual Interface) from being copied. The specification of HDCP is
decided and controlled by Digital Content protection, LLC. Should
the specification be changed, this Projector may not display the
digital content protected by HDCP.
•Wired, Wireless, and Memory Viewer are for the Network function.
Refer to the owner's manual "Network Set-up and Operation"
supplied with this projector or the owner's manual of Memory
viewer (optionally available).
30
✳
✳ See Note at the bottom of this page.
Input Menu icon
Input Menu
Move the pointer
(red arrow) to
Computer 1 (Digital)
and press the
SELECT button.
Computer
1
Move the pointer to
the source that you
want to select and
press the SELECT
button.
Computer Input
Computer System Selection
This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, WXGA or
UXGA with its Multi-scan system and Auto PC Adjustment. If Computer is selected as a signal source, this
projector automatically detects the signal format and tunes to project a proper image without any additional
setting. (Signal formats provided in this projector is shown on page 65 )
One of the following messages may appear when:
Auto
The projector cannot recognize the connected
signal conforming to the provided PC Systems.
The message "Auto" will be displayed on the PC
System Menu icon and the Auto PC Adjustment
function will work to display proper images. If
the image is not projected properly, a manual
adjustment is required. (p33, 34)
-----
There is no signal input from computer. Check
the connection between your computer and the
projector. (See " Troubleshooting" p60)
Mode 1
The preset system is manually adjusted in the
PC Adjust Menu. The adjusted data can be
stored in Mode 1~5. (p33, 34)
SVGA 1
PC Systems provided in this projector is chosen.
The projector chooses a proper system provided
in the projector and displays it.
PC System Menu
The Auto PC Adjustment
function operates to adjust
the projector.
*Mode 1 and SVGA 1 are examples.
PC System Menu
Selecting Computer System Manually
PC system can also be selected manually.
2
Press the MENU button to display the On-Screen
Menu. Press the Point 7 8 buttons to move the red
framed pointer to the PC System Menu icon.
Press the Point ed buttons to move the red arrow
pointer to the system that you want to set, and then
press the SELECT button.
Computer Input
1
The PC System Menu icon
Selected system is
displayed.
Systems on this dialog box
can be selected.
Custom Mode (1~5) set in the
PC Adjust Menu. (p33, 34)
31
Computer Input
Auto PC Adjustment
Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal, and Vertical to
conform to your computer. Auto PC Adjustment function can be operated as follows.
Direct Operation
Remote Control
The Auto PC adjustment function can be operated directly by
pressing the AUTO PC button on the remote control.
AUTO PC button
Menu Operation
Auto PC Adj.
1
2
Press the MENU button to display the On-Screen
Menu. Press the Point 7 8 buttons to move the red
framed pointer to PC Adjust Menu item.
Press the Point ed buttons to move the red framed
pointer to Auto PC Adj. item and then press the
SELECT button twice.
To store adjustment parameters
Adjustment parameters from Auto PC Adjustment can be
memorized in this projector. Once parameters are
memorized, the setting can be done just by selecting Mode
in the PC System Menu (p31). See “Store” on page 34.
✔Note:
•Fine sync, Total dots, Horizontal, and Vertical of some computers
cannot be fully adjusted with this Auto PC Adjustment function.
When the image is not provided properly with this operation,
manual adjustments are required. (p33, 34)
•The Auto PC Adjustment cannot be operated when 480i, 575i,
480p, 575p, 720p,1035i, or 1080i is selected in the PC System
Menu (p31) , or when the signal is coming from DVI-terminal.
32
PC Adjust Menu
PC Adjust Menu icon
Move the red framed
pointer to the Auto PC Adj.
item and press the SELECT
button.
"Please wait..." message
will appear while Auto PC
adjustment is in process.
Computer Input
Manual PC Adjustment
Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector.
Manual PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The
projector has 5 independent memory areas to memorize those parameters manually adjusted. It allows you to
recall the setting for a specific computer.
1
Press the MENU button to display the On-Screen
Menu. Press the Point 7 8 buttons to move the red
framed pointer to the PC Adjust Menu icon.
2
Press the Point ed buttons to move the red framed
pointer to the item that you want to adjust and then
press the SELECT button to display the adjustment
dialog box. Press the Point 7 8 buttons to adjust the
value.
PC Adjust Menu
PC Adjust Menu icon
Move the red framed
pointer to an item and
press the SELECT button.
Fine sync
Eliminate flicker from the image displayed. Press the Point
7 8 buttons to adjust the value. (From 0 to 31)
Status (Stored / Free) of the
selected Mode.
Selected Mode
Total dots
Adjust the number of total dots in one horizontal period.
Press the Point 7 8 buttons to adjust number to match
your PC image.
Press the Point 7 8buttons
to adjust the value.
Horizontal
Press the Point 7 8 buttons to adjust the horizontal picture
position.
Vertical
Press the Point
position.
78
buttons to adjust the vertical picture
Computer Input
Current mode
Press the SELECT button
at this item to adjust other
items.
Press the SELECT button to show H-sync freq. and V-sync
freq. of the connected computer.
Clamp
Adjust clamp level. When the image has dark bars, try this
adjustment.
Press the SELECT button at
the Current mode item to
show the information of the
connected computer.
33
Computer Input
Display area H
Adjust the horizontal area displayed by this projector. Press
the Point 7 8 buttons to decrease/increase the value.
Display area V
Adjust the vertical area displayed by this projector. Press
the Point 7 8 buttons to decrease/increase the value.
Reset
To reset the adjusted data, select Reset and press the
SELECT button. The confirmation box will appear and then
select [Yes]. All adjustments will return to their previous
figures.
Move the red framed
pointer to an item and
press the SELECT button.
Mode free
To clear the stored data, move the red framed pointer to the
Mode free item and then press the SELECT button. Move
the red arrow pointer to the Mode that you want to clear
and then press the SELECT button.
To clear adjusted data
This Mode has
stored parameters .
Store
To store adjusted data, move the red framed pointer to the
Store item and then press the SELECT button. Move the
red arrow pointer to any of Mode 1 to 5 in which you want
to store and then press the SELECT button.
Quit
Exit the PC Adjust Menu.
Vacant Mode
Values of “Total dots,”
“Horizontal,” “Vertical,”
“Display area H,” and
“Display area V.”
To store adjusted data
✔Note:
•Display area (H/V) cannot be selected when 480i, 575i, 480p,
575p, 720p, 1035i, or 1080i is selected in the PC System Menu
(p31).
•PC Adjust Menu cannot be selected when Computer 1(Digital) is
selected in the Input Menu. (p30)
Close this dialog box.
34
Computer Input
Image Level Selection
Direct Operation
Remote Control
IMAGE button
Select an image level among Dynamic, Standard, Real,
Blackboard(Green), Image 1, Image 2, Image 3, and Image 4
by pressing the IMAGE button on the remote control.
Dynamic
Picture level suitable for viewing picture in a bright room.
Dynamic
Standard
IMAGE
button
Standard
Normal picture level preset on this projector.
Real
Blackboard(Green)
Image 1
Real
Picture level with improved halftone for graphics.
Image 2
Blackboard(Green)
Picture level suitable for the image projected on a
blackboard.
This mode assists to enhance the image projected on a
blackboard. This is mainly effective on a green colored
board, not truly effective on a black colored board.
Image 3
Image 4
Image 1~4
User preset image in the Image Adjust Menu (p37).
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Press the Point 7 8 buttons to move the red
framed pointer to the Image Select Menu icon.
2
Press the Point ed buttons to move the red framed
pointer to the level that you want to set and then press
the SELECT button.
Image Select Menu icon
Image Select Menu
Move the red framed pointer
to the level and press the
SELECT button.
Computer Input
Dynamic
Picture level suitable for viewing picture in a bright room.
Standard
Normal picture level preset on this projector.
The level being selected.
Real
Picture level with improved halftone for graphics.
Blackboard(Green)
Picture level suitable for the image projected on a
blackboard. See above for further description.
Image 1~4
User preset image in the Image Adjust Menu (p37).
35
Computer Input
Image Level Adjustment
1
Press the MENU button to display the On-Screen
Menu. Press the Point 7 8 buttons to move the red
framed pointer to the Image Adjust Menu icon.
2
Press the
pointer to
press the
displayed.
buttons.
Image Adjust Menu
Image Adjust Menu icon
Point ed buttons to move the red framed
the item that you want to adjust, and then
SELECT button. The level of each item is
Adjust each level by pressing the Point 7 8
Move the red framed
pointer to the item to be
selected and then press
the SELECT button.
Contrast
Press the Point 7 button to decrease the contrast and the
Point 8 button to increase contrast. (From 0 to 63.)
Brightness
Selected Image level
Press the Point 7 button to adjust the image darker and the
Point 8 button to adjust the image brighter. (From 0 to 63.)
Color temp.
Press the Point 7 button or the Point 8 button for Color
temp. level that you want to select. (XLow, Low, Mid, or
High)
Press the Point 7 8 buttons
to adjust the value.
White balance (Red)
Press the Point 7 button to lighten the red tone and the
Point 8 button to deepen the red tone. (From 0 to 63.)
White balance (Green)
Press the Point 7 button to lighten the green tone and the
Point 8 button to deepen the green tone. (From 0 to 63.)
White balance (Blue)
Press the Point 7 button to lighten the blue tone and the
Point 8 button to deepen the blue tone. (From 0 to 63.)
Sharpness
Press the Point 7 button to soften the image and the Point
8 button to sharpen the image. (From 0 to 15.)
Gamma
Press the Point 7 8 buttons to obtain better balance of
contrast. (From 0 to 15.)
Reset
To reset the adjusted data, select Reset and press the
SELECT button. The confirmation box will appear and then
select [Yes]. All adjustments will return to their previous
figures.
36
✔Note:
After adjusting any of the White balance Red,
Green or Blue, the Color temp will change to
"Adj.".
Computer Input
Store
To store the adjusted data, select Store and press the
SELECT button. Select a level from Image 1 to 4 with the
Point ed buttons and press the SELECT button. A
confirmation box will appear and then select [Yes].
Stored data can be called up by selecting "Image" in the
Image Level Selection on page 35.
Move the red framed
pointer to any of
Image 1 to 4 where
you want to set and
then press the
SELECT button.
Quit
Exit the Image Adjust Menu.
Store item
Press the SELECT button
at this item to store the
adjusted data.
The confirmation
box will appear,
then select [Yes].
Screen Size Adjustment
This projector has the picture screen resize function, which enables you to customize the image size.
1
Press the MENU button to display the On-Screen
Menu. Press the Point 7 8 buttons to move the red
framed pointer to the Screen Menu icon.
2
Press the Point ed buttons and move the red framed
pointer to the function that you want to select and
then press the SELECT button.
Screen Menu
Screen Menu icon
Move the red
framed pointer to the
function and press the
SELECT button.
Normal
Provide the image to fit the screen size.
✔Note:
True
Wide
Provide the image to fit wide video aspect ratio (16 : 9) by
expanding the image width uniformly. This function can be
used for providing a squeezed video signal at 16 : 9.
Computer Input
Provide the image in its original size. When the original
image size is larger than the screen size (1024 x 768), this
projector enters panning mode automatically. Pan the
image with Point ed7 8 buttons. When adjusted, the
arrows will turn red. When reached to the correction limit,
the arrows will disappear.
•This Screen Menu cannot be operated when
720p(HDTV), 1035i (HDTV), or 1080i (HDTV)
is selected in the PC System Menu (p31).
•This projector cannot display any resolution
higher than 1600 X 1200. If your computer’s
screen resolution is higher than it, reset the
resolution to the lower before connecting to the
projector.
•The image data in other than 1024 x 768 is
modified to fit the screen size in initial mode.
•True, Full screen, and Digital zoom +/– cannot
be selected when 480i, 575i, 480p, or 575p is
selected in the PC System Menu (p31).
Full screen
Provide the full screen image.
37
Computer Input
For zooming in and out the images
Remote Control
POINT buttons
Digital zoom +
When the Digital zoom + is selected, the On-Screen Menu
will disappear and the message “D. zoom +” will be
displayed. Press the SELECT button to expand the image
size. And press the Point ed 7 8 buttons to pan the
image. The Panning function can work only when the
image is larger than the screen size.
A projected image can be also expanded by pressing the
D.ZOOM ▲ button on the remote control.
Digital zoom –
When Digital zoom – is selected, the On-Screen Menu will
disappear and the message “D. zoom –” will be displayed.
Press the SELECT button to compress image size.
A projected image can be also compressed by pressing the
D.ZOOM ▼ button on the remote control.
To exit the Digital zoom +/– mode, press any button except
the D.ZOOM ▲▼ buttons, SELECT, and Point button.
To return to the previous screen size, select a screen size
from the Screen Size Adjustment or select an input source
from the Input Source Selection (p29, 30) again, or adjust
the screen size with the D.ZOOM ▲▼ buttons.
38
SELECT button
D.ZOOM + button
D.ZOOM - button
✔Note:
•The panning function may not operate properly if
the stored Mode in the PC Adjust Menu is used.
(p34)
•The minimum compression ratio can be limited
depending on the input signal or when the
Keystone function is working.
• True, Full screen, and Digital zoom +/– cannot
be selected when 480i, 575i, 480p, or 575p is
selected in the PC System Menu (p31).
•Digital zoom +/- cannot be selected when Full
screen or True is selected.
Video Input
Input Source Selection (Video, S-video)
Direct Operation
INPUT button
POWER WARNING LAMP R
TO
AU
FF
-O
T
SE
T
PU
IN
U
EN
M
N
O
Choose Video by pressing the INPUT button on the top
control or the VIDEO button on the remote control.
Before using these buttons, correct input source should be
selected through menu operation as described below.
Top Control
INPUT button
Computer 1
(Analog/Digital)
CT
LE
SE
Computer 2
✳
+
V
-V
Video
Wired
✳ See Note at the bottom of this page.
Remote Control
VIDEO button
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Press the Point 7 8 buttons to move the red
framed pointer to the Input Menu icon.
2
Press the Point ed buttons to move the red arrow
pointer to Video and then press the SELECT button to
display the Source Select Menu .
3
Move the pointer to the source that you want to select
and then press the SELECT button.
Auto
When selecting Auto, the projector
automatically detects incoming video signal, and
adjusts itself to optimize its performance. The
projector selects connection in the following
order:
1. S-video
2. Video
When video input signal is connected to the
VIDEO jack, select Video.
S-video
When video input signal is connected to the SVIDEO jack, select S-video.
Move the pointer
to Video and press
the SELECT
button.
VIDEO
Source Select Menu (VIDEO)
Move the pointer to the
source that you want to
select and press the
SELECT button.
Video Input
Video
Input Menu icon
Input Menu
✔Note:
•When Monitor out is selected in the Terminal function (p50),
Computer 2 is not displayed.
•Wired, Wireless, and Memory Viewer are for the Network function.
Refer to the owner's manual "Network Set-up and Operation"
supplied with this projector or the owner's manual of Memory
viewer (optionally available).
39
Video Input
Input Source Selection (Component, RGB Scart 21-pin)
Direct Operation
INPUT button
POWER WARNING LAMP R
TO
AU
FF
-O
SE
T
PU
IN
U
EN
M
N
O
INPUT button
Computer 1
(Analog/Digital)
CT
LE
SE
Choose Computer 2 by pressing the INPUT button on the
top control or press the COMPUTER button on the remote
control.
Before using these buttons, correct input source should be
selected through Menu operation as described below.
Top Control
Computer 2
✳
+
V
-V
Video
Wired
Remote Control
COMPUTER button
COMPUTER button
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Press the Point 7 8 buttons to move the red
framed pointer to the Input Menu icon.
2
Press the Point ed buttons to move the red arrow
pointer to Computer 2 and then press the SELECT
button.
3
After the Source Select Menu appeared for Computer
2, move the pointer to Component or RGB(Scart) and
then press the SELECT button.
Component
RGB (Scart)
When the input source is coming from
video equipment connected to the
COMPUTER IN 2 / COMPONENT IN /
MONITOR OUT terminal with a
Component-VGA Cable, select Component.
When the input source is coming from
video equipment connected to the
COMPUTER IN 2 / COMPONENT IN /
MONITOR OUT terminal with a Scart-VGA
Cable, select RGB (Scart).
✔Note:
•When Monitor out is selected in the Terminal function (p50),
Computer 2 is not displayed.
•Wired, Wireless, and Memory Viewer are for the Network
function. Refer to the owner's manual "Network Set-up and
Operation" supplied with this projector or the owner's manual of
Memory viewer (optionally available).
40
Computer 1
(Analog/Digital)
Computer 2
✳
✳ See Note at the bottom of this page.
Input Menu
Input Menu icon
Move the pointer (red
arrow) to Computer 1
and press the SELECT
button.
Computer
2
Source Select Menu
Move the pointer to
Component or RGB(Scart)
and press the SELECT
button.
Video Input
Video System Selection
1
Press the MENU button to display the On-Screen
Menu. Press the Point 7 8 buttons to move the red
framed pointer to the AV System Menu icon.
2
Press the Point ed buttons to move the red arrow
pointer to the system that you want to select and then
press the SELECT button.
AV System Menu (Video or S-video)
Video or S-video
Auto
The projector automatically detects incoming video system,
and adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select system
manually.
PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N
If the projector cannot reproduce proper video image, it is
necessary to select a specific broadcast signal format
among PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and PALN.
AV System Menu icon
Selected system is
displayed.
Move the pointer to a
system and press the
SELECT button.
AV System Menu (Component)
Component
Auto
The projector automatically detects incoming video signal,
and adjusts itself to optimize its performance.
AV System Menu icon
Selected system is
displayed.
COMPONENT VIDEO SIGNAL FORMAT
If the projector cannot reproduce proper video image, it is
necessary to select a specific component video signal
format among 480i, 575i, 480p, 575p, 720p, 1035i, and
1080i.
Move the pointer to a
system and press the
SELECT button.
Video Input
✔Note:
The AV System Menu cannot be selected when selecting RGB(Scart).
41
Video Input
Image Level Selection
Direct Operation
Remote Control
IMAGE button
Dynamic
Select a desired image level among Dynamic, Standard,
Cinema, Blackboard (Green), Image 1, Image 2, Image 3,
and Image 4 by pressing the IMAGE button on the remote
control.
Standard
Cinema
Dynamic
Picture level suitable for viewing picture in a bright room.
IMAGE
button
Standard
Normal picture level preset on this projector.
Blackboard(Green)
Image 1
Cinema
Picture level adjusted for the picture with fine tone.
Image 2
Blackboard(Green)
Picture level suitable for the image projected on a
blackboard.
This mode assists to enhance the image projected on a
blackboard. This is mainly effective on a green colored
board, not truly effective on a black colored board.
Image 3
Image 4
Image 1~4
User preset image in the Image Adjust Menu (p43, 44).
Image Select
Menu icon
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Press the Point 7 8 buttons to move the red
framed pointer to the Image Select Menu icon.
2
Press the Point ed buttons to move the red framed
pointer to the level that you want to set and then press
the SELECT button.
Image Select Menu
Move the red framed pointer to a
level and press the SELECT
button.
Dynamic
Picture level suitable for viewing picture in a bright room.
Standard
Normal picture level preset on this projector.
Cinema
Picture level adjusted for the picture with fine tone.
Blackboard(Green)
Picture level suitable for the image projected on a
Blackboard. See above for further description.
Image1~4
User preset image in the Image Adjust Menu (p43, 44).
42
The level being selected.
Video Input
Image Level Adjustment
1
Press the MENU button to display the On-Screen
Menu. Press the Point 7 8 buttons to move the red
framed pointer to the Image Adjust Menu icon.
2
Press the Point ed buttons to move the red framed
pointer to the item that you want to adjust and then
press the SELECT button. The level of each item is
displayed. Adjust each level by pressing the Point 7
8buttons.
Image Adjust Menu
Image Adjust Menu icon
Move the red framed
pointer to the item you
want to adjust and then
press the SELECT button.
Contrast
Press the Point 7 button to decrease the contrast and the
Point 8 button to increase contrast. (From 0 to 63.)
Brightness
Press the Point 7 button to adjust the image darker and the
Point 8 button to adjust the image brighter. (From 0 to 63.)
Color
Press the Point 7 button to lighten the color and the Point
8 button to deepen the color. (From 0 to 63.)
Tint
Press the Point 7 8 buttons to obtain a proper color. (From
0 to 63.)
Press the Point 7 8
buttons to adjust the value.
Press the SELECT button
at this item to display other
items.
Color temp.
Press the Point 7 8 buttons for Color temp. level that you
want to select. (XLow, Low, Mid, or High)
White balance (Red)
Press the Point 7 button to lighten the red tone and the
Point 8 button to deepen the red tone. (From 0 to 63.)
Press the SELECT
button at this item to
display previous items.
White balance (Green)
Press the Point 7 button to lighten the green tone and the
Point 8 button to deepen the green tone. (From 0 to 63.)
White balance (Blue)
Press the Point 7 button to lighten the blue tone and the
Point 8 button to deepen the blue tone. (From 0 to 63.)
Video Input
✔Note:
•The Tint cannot be selected when the video system is PAL, SECAM,
PAL-M, or PAL-N. (p41)
•After adjusting any of the White balance Red, Green or Blue, the
Color temp. will change to "Adj.".
43
Video Input
Sharpness
Press the Point 7 button to soften the image and the Point
8 button to sharpen the image. (From 0 to 15.)
Gamma
Press the Point 7 8 buttons to obtain better balance of
contrast. (From 0 to 15.)
Noise reduction
Noise interference on the screen can be reduced. Select
one of the following to get smoother images.
Off...........disabled.
L1............lower reduction
L2............higher reduction
Progressive
Interlaced video signal can be displayed in a progressive
picture. Select one of the following.
Off...........disabled.
L1............Select “L1” for an active picture.
L2............Select “L2” for a still picture.
Film .........Select “Film” for watching a film. With this
function, the projector reproduces pictures
faithful to the original film quality.
Reset
To reset the adjusted data, select Reset and press the
SELECT button. The confirmation box will appear and then
select [Yes]. All adjustments will return to their previous
figures.
Store
item
Image Level Menu
Move the red framed pointer to
an image item to be set and
then press the SELECT button.
Store
To store the adjusted data, select Store and press the
SELECT button. Select a level from Image 1 to 4 with the
Point ed buttons and press the SELECT button. A
confirmation box will appear and then select [Yes].
Stored data can be called up by selecting "Image" in the
Image Level Selection on page 42.
Quit
Exit the Image Adjust Menu.
✔Note:
Noise reduction and Progressive cannot be selected when 480p,
575p, 720p, 1035i, or 1080i is selected. (p41)
44
The confirmation box
will appear and then
select [Yes].
Video Input
Screen Size Adjustment
This projector has the picture screen resize function, which enables you to customize the image size.
1
Press the MENU button to display the On-Screen
Menu. Press the Point 7 8 buttons to move the red
framed pointer to the Screen Menu icon.
2
Press the Point ed buttons and move the red framed
pointer to the function that you want to select and
then press the SELECT button.
Screen Menu
Screen Menu icon
Move the red framed pointer to a
function and press the SELECT
button.
Normal
Provide the image at a normal video aspect ratio of 4 : 3.
Wide
Provide the image at a wide screen ratio of 16 : 9.
✔Note:
Screen Menu cannot be operated when 720p, 1035i, or 1080i is
selected in the AV System Menu (p41).
Video Input
45
Setting
Setting
This projector has Setting menu that allows you to set up
the other various functions described as follows;
1
Press the MENU button to display the On-Screen
Menu. Press the Point 7 8 buttons to move the red
framed pointer to the Setting Menu icon.
2
Press the Point ed buttons to move the red framed
pointer to the item that you want to set and then press
the SELECT button. The Setting dialog box appears.
Setting Menu (Language)
Set the red framed
pointer to the item
and press the
SELECT button.
Setting Menu
icon
Press the SELECT button at
Language item, the
Language Menu will appear.
Language
The language used in the On-Screen Menu is available in
English, German, French, Italian, Spanish, Portuguese,
Dutch, Swedish, Finnish, Polish, Hungarian, Romanian,
Russian, Chinese, Korean, or Japanese.
Auto setup
This function enables Auto Keystone correction and Auto
PC adjustment by pressing the AUTO SETUP button on the
top control or the AUTO SET button on the remote control.
Settings for those functions can be altered as follows:
Press the SELECT button
at this item to display the
other languages.
Auto PC Adj.
On . . . . . .enables Auto PC Adjustment when pressing
the AUTO SET button on the remote control or
the AUTO SETUP button on the top control.
Off . . . . . .disables Auto PC Adjustment.
Auto Keystone
Auto . . . . . always works and corrects keystone distortion
according to the projector's tilt.
Manual . . .works only when pressing the AUTO SET
button on the remote control or the AUTO
SETUP button on the top control.
Off . . . . . .disables Auto Keystone.
Press the
SELECT button at
this item to close
the dialog box.
✔Note:
• Auto PC Adj. and Auto Keystone cannot be set "Off" at the same
time.
• Auto Keystone corrects vertical distortion only, not correct
horizontal distortion.
• The Auto Keystone cannot work when Ceiling feature is On in the
Setting menu. (p50)
• Perfect correction of the image distortion cannot be ensured with
the Auto setup function. If the distortion is not corrected properly
by pressing the AUTO SETUP/ AUTO SET button, adjust manually
by pressing the KEYSTONE button on the remote control or
selecting Keystone in the Setting menu. (See p25, 47)
Auto setup
Select Auto setup and this
box appears.
Choose
desired setting for Auto
keystone and Auto PC adj.
with the Point 7 8 button.
46
Setting
Keystone
Keystone
Setting
This function corrects distortion of a projected image.
Select either Store or Reset with the Point 7 8 buttons, and
then press the SELECT button. The keystone dialog box
will appear. Correct keystone with the Point ed buttons.
(p25)
Store .........store the keystone correction even when the
AC power cord is unplugged.
Reset ........reset the keystone correction when the AC
power cord is unplugged.
Blue back
Press the Point 7 8 buttons to switch On/Off. When this
function is “On,” a blue image is displayed while the input
signal is not detected.
Display
Press the Point 7 8 buttons to switch On/Off. This function
decides to display On-Screen Displays.
On .........................Show all the On-Screen Displays. Use
this function when you want to project
images after the lamp becomes bright
enough. Factory default setting is this
mode.
Countdown off ......Show the input image instead of the
countdown when turning on the
projector. Use this function when you
want to project the image as early as
possible even when the lamp is not
bright enough.
Off .........................Do not show On-Screen Displays.
except;
● On-Screen Menu
● “Power off?” message
● P-Timer
● “No signal” message for Power management item (p50)
● ”Please wait...” message
● White arrows for True item in the Screen Menu (p37)
47
Setting
Logo (Logo and Logo PIN code lock settings)
This function allows you to customize the screen logo with
Logo select, Capture, and Logo PIN code lock functions.
✔Note:
Logo select
When On is selected in Logo PIN code lock function, Logo select and
Capture functions cannot be selected.
Logo select
This function decides the start-up display as follows:
User ..........the image you captured
Default ......the factory-set logo
Off.............countdown only
Capture
This function enables you to capture the image being
projected and use it for a start-up display or interval of
presentations.
After capturing the projected image, go to the Logo
select function and set it to “User”. Then the captured
image will be displayed when turning on the projector
next time or pressing the NO SHOW button. (p28)
To capture the image, select [Yes]. To cancel the
Capture function, select [No].
Capture
✔Note:
•Before capturing an image, select Standard in the Image Select
Menu to capture a proper image. (p35, 42)
•A signal from a computer can be captured up to XGA(1024 x
768). A signal from video equipment can be captured except
for 720p, 1035i, and 1080i.
•When capturing the image that has been adjusted by the
Keystone function, the adjustment data is automatically reset
and the projector captures an image without keystone
adjustment.
• When the Logo PIN code lock function is On, Capture menu
cannot be selected.
• When starting to capture a new image, the previously stored
image is cleared even if you cancel the capturing.
48
Select [Yes] to capture
the projected image.
Select [Yes] to
stop capturing.
Setting
Logo PIN code lock
Logo PIN code lock
Setting
This function prevents an unauthorized person from
changing the screen logo.
Off........the screen logo can be changed freely from
the Logo select menu. (p48)
On ........the screen logo cannot be changed without
the Logo PIN code.
If you want to change the Logo PIN code lock setting,
enter a Logo PIN code along the following steps. The
initial Logo PIN code is set "4321" at the factory.
Enter a Logo PIN code
Select a number by pressing the Point 7 8 buttons and
fix the number with the SELECT button. The number
will change to "✳". If you fixed an incorrect number,
move the pointer to "Set" or "Clear" once by pressing the
Point d button, then return to "Logo PIN code". Enter
the correct number again.
Repeat this step to complete entering a four-digit
number.
When the four-digit number is fixed, the pointer will
automatically move to "Set". Press the SELECT button
so that you can change the Logo PIN code lock setting.
If you entered an incorrect Logo PIN code, "Logo PIN
code" and the number (✳ ✳ ✳ ✳ ) will turn red and
disappear. Enter a correct Logo PIN code all over again.
Logo PIN code lock Dialog Box
Pointer
Quit
After a correct Logo PIN code is entered, the
following dialog box will appear.
Select On/Off by pressing the Point 7 8
buttons or change the Logo PIN code.
Change the Logo PIN code
Logo PIN code can be changed to your desired four-digit
number. Select "Logo PIN code change" with the Point
d button and press the SELECT button. Set a new Logo
PIN code.
Be sure to note the new Logo PIN code and keep it at
hand. If you lost the number, you could no longer
change the Logo PIN code setting. For details on PIN
code setting, refer to relevant instructions of the PIN
code lock function on page 52, 53.
CAUTION:
WHEN YOU HAVE CHANGED THE LOGO PIN CODE,
WRITE DOWN THE NEW PIN CODE IN COLUMN OF
THE LOGO PIN CODE NO. MEMO ON PAGE 70, AND
KEEP IT SECURELY. SHOULD THE LOGO PIN CODE
BE LOST OR FORGOTTEN, THE PROJECTOR CAN
NO LONGER BE OPERATED.
49
Setting
Ceiling
Ceiling
When this function is “On,” the picture will be top/bottom
and left/right reversed. This function is used to project the
image from a ceiling mounting the projector.
Rear
When this function is “On,” the picture will be left/right
reversed. This function is used to project the image to a
rear projection screen.
Terminal
Rear
The COMPUTER IN 2 / COMPONENT IN / MONITOR OUT
terminal on the back of the projector is switchable for
computer input or monitor output. (See page 10) Select
Computer 2 or Monitor Out with the Point 78 buttons.
Computer 2 ........computer input
Monitor Out .......monitor out
Terminal function is not available when selecting Computer
2 to the input source. Change the input source to the
others (Computer1 or Video) so that the Terminal function
will be available. (p29, 30, 39, 40)
Standby mode
This function is available when operating the projector via
the network.
Normal···· Supply the power to the network function even
after turning off the projector. You can turn
on/off the projector via the network, modify
network environment and receive an e-mail
about projector status while the projector is
powered off.
Eco..........Select Eco when you do not use the projector
via the network. The projector's network
function will stop when turning off the projector.
Refer to the owner's manual "Network Set-up and
Operation" supplied with this projector.
✔Note:
When selecting Normal, the cooling fans will be
operating even if the projector is turned off.
Power management
Power management
For reducing power consumption as well as maintaining the
lamp life, the Power management function turns off the
projection lamp when the input signal is interrupted and no
button is pressed for a certain period.
When the input signal is interrupted and no button is
pressed for 30 seconds or more, the timer display with "No
signal" message will appear. The countdown will start to
turn off the lamp.
Select one of the operations.
Ready ...............When the lamp has been fully cooled
down, the POWER indicator changes to
green blinking. In this condition, the
projection lamp will be turned on if the
input signal is reconnected or any button
on the top control or remote control unit
is pressed.
Shut down ......When the lamp has been fully cooled
down, the power will be turned off.
Off . . . . . . . . . . .Power management function is off.
Then set the countdown timer with the Point 7 8 buttons.
50
Time left before Lamp is off.
Press the SELECT button
at Power management and
this box will appear.
Choose one of three
settings with the Point 7 8
buttons, and
go to the timer with the
Point ed buttons and set
time with the Point 7 8
buttons.
Setting
On start
On start
Setting
When this function is “On”, the projector will be
automatically turned on just by connecting the AC power
cord to a wall outlet.
✔Note:
Be sure to turn the projector off properly (see “Turning Off the
Projector” on page 22). If the projector is turned off in the incorrect
sequence, the On start function does not operate properly.
Lamp control
This function allows you to change brightness of the
screen.
Normal ....normal brightness
Auto ........brightness according with the input signal
Eco ..........lower brightness reduces the lamp
power consumption and extends the
lamp life.
Pointer
You can emphasize a part of the projected image with this
function. Choose either Spotlight or Pointer with the Point
ed button and press the SELECT button. Then select one
of three different sizes (Large, Middle, and Small) of
Spotlight or a pointer of three different patterns (Arrow,
Finger, and Dot) of Pointer. (See page 13 for operation.)
Remote control
Remote control
This projector provides eight different remote control codes
(Code 1-Code 8); the factory-set, initial code (Code 1) and
the other seven codes (Code 2 to Code 8). This switching
function prevents remote control interference when
operating several equipment at the same time.
The same code should set on both the projector and the
remote control. For example, operating the projector in
“Code 7”,the remote control unit also must be switched to
“Code 7”.
To change the code for the projector;
Select a remote control code in this Setting Menu.
To change the code for the remote control;
While holding down the MENU button, press the IMAGE
button number of times corresponding to the remote
control code for the projector. (See page 14 for details.)
51
Setting
Security (Key lock and PIN code lock settings)
Key lock
This function allows you to use Key lock and PIN code
lock function to set the security for the projector
operation.
Key lock
This function locks operation of the top control or the
remote control.
It is useful to prevent operation by an unauthorized
person.
···· not locked.
Select Key lock. Choose one
of the alternatives with the
Point ed buttons and select
[Yes] to activate it.
···· lock the operation of the top control.
To unlock, use the remote control.
···· lock the operation of the remote control.
To unlock, use the top control.
If the top control accidentally becomes locked and you
do not have the remote control nearby, disconnect the
AC power cord from the AC outlet, and then with
pressing the SELECT button, reinsert the AC power
cord. This will cancel the top control lock.
PIN code lock
PIN code lock
This function prevents the projector from being operated
by an unauthorized person and provides the following
settings for security options.
Off........the projector is not locked with the PIN code.
On1 ......require to enter the PIN code every time
turning on the projector.
On2 ......require to enter the PIN code to operate the
projector once the power cord is disconnected;
as long as the AC power cord is connected, the
projector can be operated without the PIN code.
Whenever to change the PIN code lock setting or the
PIN code (the four-digit number), you are required to
enter the PIN code. "1234" is set as the initial PIN code
at the factory.
52
When the projector is locked
with the PIN code, the PIN
code lock mark appears on the
menu bar.
Setting
Enter a PIN code
When the four-digit number is fixed, the pointer will
automatically move to "Set". Press the SELECT button
so that you can change the following PIN code lock
settings.
Pointer
Setting
Select a number by pressing the Point 7 8 buttons and
fix the number with the SELECT button. The number
will change to "✳". If you fixed an incorrect number,
move the pointer to "Set" or "Clear" once by pressing the
Point d button, then return to "PIN code". Enter the
correct number again.
Repeat this step to complete entering a four-digit
number.
Enter a PIN code
Quit
The input numbers change
to “✳” for security.
If you entered an incorrect PIN code, "PIN code" and the
number (✳✳✳✳) will turn red and disappear. Enter a
correct PIN code all over again.
To Change the PIN code lock setting
Select Off, On1, or On2 with the Point 7 8 buttons and
then move the red framed pointer to "Quit" with the
Point d button. Press the SELECT button to close the
dialog box.
When the pointer
automatically moves to "Set",
press the SELECT button.
Change the PIN code lock setting
Select a desired
setting with the
Point 7 8 buttons.
To Change the PIN code
The PIN code can be changed to your desired four-digit
number.
Select "PIN code change" with the Point d button, and
press the SELECT button to display the New PIN code
input dialog box.
Change the PIN code
Select a number with the Point 7 8 buttons and fix the
number with the SELECT button. Repeat it to complete
entering a four-digit number. When the four-digit
number is fixed, the pointer will automatically move to
"Set". Then press the SELECT button.
Select PIN code change and
press the SELECT button.
The New PIN code input
dialog box will appear.
CAUTION:
WHEN YOU HAVE CHANGED THE PIN CODE, WRITE
DOWN THE NEW PIN CODE IN COLUMN OF THE PIN
CODE NO. MEMO ON PAGE 70, AND KEEP IT
SECURELY. IF YOU FORGET YOUR PIN CODE, THE
PROJECTOR CAN NO LONGER BE STARTED.
The input numbers are
being displayed for
confirmation.
53
Setting
Fan
This function provides the following alternatives in the
cooling fans' operation after turning off the projector. (p22)
L1 . . . . . . .normal operation
L2 . . . . .slower and lower-sound than the normal
operation (L1), but it takes longer to cool the
projector down.
Lamp counter
Factory default
Select Factory default and
this box will appear.
Select [Yes] , and the next
box will appear.
This function is used to reset the lamp replacement
counter. When replacing the projection lamp, reset the
lamp replacement counter by using this function. See page
59 for operation.
Factory default
This function returns all setting values except for the user
logo, PIN code lock, Logo PIN code lock and the lamp
counter to the factory default settings.
Quit
Exit the Setting Menu.
54
Select [Yes] to
activate it.
Maintenance and Cleaning
Warning Indicator
The WARNING indicator shows the state of the function which protects the projector. Check the state of the
WARNING indicator and the POWER indicator to take proper maintenance.
The projector is shut down and the WARNING
indicator is blinking red.
POWER WARNING LAMP REPLACE
TO
AU
UP
FF
-O
T
SE
T
PU
IN
U
EN
M
N
O
Maintenance & Cleaning
CT
LE
SE
+
E
M
LU
VO
E
M
LU
O
-V
When the temperature inside the projector reaches a
certain level, the projector will be automatically shut down
to protect the inside of the projector. The POWER indicator
is blinking while the projector is being cooled down. When
the projector has cooled down sufficiently (to its normal
operating temperature), it can be turned on again by
pressing the POWER ON-OFF button.
WARNING
blinking red
Top Control
✔Note:
After the temperature inside the projector returns to normal, the
WARNING indicator still continues to blink. When the projector is
turned on again, the WARNING indicator stops blinking.
Then check the matters below:
– Did you provide appropriate space for the projector to be
ventilated? Check the installing condition to see if
ventilation slots are not blocked.
– Is the projector not installed near the ventilation duct of
air-conditioning equipment which may be hot? Install the
projector away from the ventilation duct of airconditioning equipment.
– Are the air filters clean? Clean the air filters periodically.
(p56)
The projector is shut down and the WARNING
indicator emits a red light.
POWER WARNING LAMP REPLACE
TO
AU
UP
FF
-O
T
SE
T
PU
IN
U
EN
M
N
O
CT
LE
SE
+
E
M
LU
VO
E
M
LU
O
-V
When the projector detects an abnormal condition, it is
automatically shut down to protect the inside and the
WARNING indicator will be red. In this case, disconnect the
AC power cord and reconnect it, and then turn the projector
on once again for check. If the projector cannot be turned
on and the WARNING indicator emits a red light, disconnect
the AC power cord and contact the service station for check
and repair.
WARNING
emit a red light
Top Control
CAUTION
DO NOT LEAVE THE PROJECTOR WITH THE AC
POWER CORD CONNECTED UNDER THE
ABNORMAL CONDITION. IT MAY RESULT IN
FIRE OR ELECTRIC SHOCK.
55
Maintenance and Cleaning
Cleaning the Air Filters
Air filters prevent dust from accumulating on the optical elements inside the projector. Should the air filters
become clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat
build up and adversely affect the life of the projector. Clean the air filters following the steps below.
1
Turn off the projector, and disconnect the AC power
cord from the AC outlet.
2
Turn over the projector and remove the air filters by
pulling the latches upward.
3
4
Clean the air filters with a brush or rinse them softly.
When cleaning the air filters by rinsing, dry them well.
Replace the air filters properly. Make sure that the air
filters are fully inserted.
CAUTION
Do not operate the projector with the air filters
removed. Dust may accumulate on the optical
elements degrading picture quality.
Do not put small parts into the air intake vents. It
may result in malfunction of the projector.
Air filters
Pull up and remove.
✔Note:
When reinserting this air filter, be sure that the
slit part is facing the outer side.
RECOMMENDATION
We recommend avoiding dusty/smoky environments
when operating the projector. Usage in these
environments may cause poor image quality.
When using the projector under dusty or smoky conditions,
dust may accumulate on a lens, LCD panels, or optical
elements inside the projector. This condition may degrade
the quality of a projected image.
When the symptoms above are noticed, contact your
authorized dealer or service station for proper cleaning.
Attaching the Lens Cover
When moving this projector or while not using it over an
extended period of time, replace the lens cover.
Lens Cover
Attach the lens cover according to the following
procedures.
1
Pass the string through a hole of the lens cover.
String for the lens cover
56
2
Turn over the projector and remove the screw with a
screwdriver.
3
Attach the string with lens cover to a hole at the
bottom of the projector and secure it with a screw.
Secure it to the hole
with a screw.
Hole
Maintenance and Cleaning
Cleaning the Projection Lens
Follow these steps to clean the projection lens.
Disconnect the AC power cord before cleaning.
2
Softly wipe the projection lens with a cleaning cloth
that contains a small amount of non-abrasive camera
lens cleaner, or use lens cleaning paper or a
commercially available air blower to clean the lens.
Avoid using an excessive amount of cleaner. Abrasive
cleaners, solvents, or other harsh chemicals might
scratch the surface.
3
When the projector is not in use, replace the lens
cover.
Maintenance & Cleaning
1
Cleaning the Projector Cabinet
Follow these steps to clean the projector cabinet.
1
Disconnect the AC power cord before cleaning.
2
Softly wipe the projector body with a soft, dry cleaning
cloth. When it is heavily soiled, use a small amount of
mild detergent and finish with a soft, dry cleaning
cloth. Avoid using an excessive amount of cleaner.
Abrasive cleaners, solvents, or other harsh chemicals
might scratch the surface.
3
When the projector is not in use, put the projector in
an appropriate carrying case to protect it from dust and
scratches.
57
Maintenance and Cleaning
Lamp Replacement
When the life of the projection lamp of this projector draws
to an end, the LAMP REPLACE indicator emits a yellow
light. If this indicator lights yellow, replace the lamp with a
new one promptly.
Top Control
POWER WARNING LAMP REPLACE
TO
AU
UP
FF
-O
T
SE
T
PU
IN
U
EN
M
CT
LE
SE
+
WARNING:
TURN OFF THE UV LAMP BEFORE
OPENING THE LAMP COVER
N
O
This indicator is yellow when
the life of the projection lamp
draws to an end.
E
M
LU
VO
E
M
LU
O
-V
CAUTION
CAUTION
Allow a projector to cool, for at least 45 minutes
before you open the Lamp cover. The inside of
the projector can become very hot.
For continued safety, replace with a lamp of the
same type. Do not drop a lamp or touch a glass
bulb! The glass can shatter and may cause injury.
Screw
Lamp Cover
Follow these steps to replace the lamp.
1
Turn off the projector and disconnect the AC power
cord. Allow the projector to cool for at least 45
minutes.
2
Remove the screw with a screwdriver, and remove
the lamp cover.
3
Remove 2 screws of the lamp with a screwdriver and
pull out the lamp by grasping the handle.
4
Replace the lamp with a new one and tighten the 2
screws back into position. Make sure that the lamp is
set properly. Replace the lamp cover and tighten the
screw.
5
Connect the AC power cord to the projector and turn
on the projector.
6
Reset the lamp replacement counter.
See “Lamp Replacement Counter” on the next page .
Handle
Screw
Screw
Lamp
ORDER REPLACEMENT LAMP
Replacement lamp can be ordered through your dealer. When ordering a projection lamp, give the following
information to the dealer.
●
Model No. of your projector
● Replacement Lamp Type No.
: LC-XB27
: POA-LMP90
(Service Parts No. 610 323 0726)
58
Maintenance and Cleaning
Lamp Replacement Counter
Be sure to reset the Lamp replacement counter after the lamp is replaced. When the Lamp replacement
counter is reset, the LAMP REPLACE indicator stops lighting.
Turn the projector on, press the MENU button to
display the On-Screen Menu. Press the Point 7 8
buttons to move the red framed pointer to the Setting
Menu icon.
1
2
Another confirmation dialog box will appear, select
[Yes] to reset the Lamp replacement counter.
To reset the lamp counter,
move the pointer to Reset
and then press the SELECT
button.
“Lamp
replacement
counter Reset?” dialog box
will be displayed.
Maintenance & Cleaning
3
Press the Point ed buttons to move the red framed
pointer to the Lamp counter function and then press
the SELECT button. The first dialog box appears and
shows the total accumulated time of the lamp usage
and the reset option. If you select "Reset", a "Lamp
replacement counter Reset?" message will appear.
Select [Yes] to continue.
Select
[Yes],
then another
confirmation box
will appear.
✔Note:
Do not reset the Lamp replacement counter without implementation
of lamp replacement. Be sure to reset the Lamp replacement
counter only after replacing the lamp.
Select [Yes] again
to reset the lamp counter.
LAMP HANDLING PRECAUTIONS
This projector uses a high-pressure lamp which must be handled carefully and properly.
Improper handling may result in accidents, injury, or create a fire hazard.
● Lamp life may differ from lamp to lamp and according to the environment of use. There is no
guarantee of the same life for each lamp. Some lamps may fail or terminate their life in a shorter
period of time than other similar lamps.
● If the projector indicates that the lamp should be replaced, i.e., if the LAMP REPLACE indicator lights
up, replace the lamp with a new one IMMEDIATELY after the projector has cooled down.
( Follow carefully the instructions in the Lamp Replacement section of this manual. ) Continuous use
of the lamp with the LAMP REPLACE indicator lighted may increase the risk of lamp explosion.
● A Lamp may explode as a result of vibration, shock or degradation as a result of hours of use as its
lifetime draws to an end. Risk of explosion may differ according to the environment or conditions in
which the projector and lamp are being used.
IF A LAMP EXPLODES, THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE TAKEN.
If a lamp explodes, disconnect the projector’s AC plug from the AC outlet immediately. Contact an
authorized service station for a checkup of the unit and replacement of the lamp. Additionally, check
carefully to ensure that there are no broken shards or pieces of glass around the projector or coming out
from the cooling air circulation holes. Any broken shards found should be cleaned up carefully. No one
should check the inside of the projector except those who are authorized trained technicians and who are
familiar with projector service. Inappropriate attempts to service the unit by anyone, especially those
who are not appropriately trained to do so, may result in an accident or injury caused by pieces of broken
glass.
59
Appendix
Troubleshooting
Before calling your dealer or service center for assistance, check the items below once again.
–Make sure you have properly connected the projector to peripheral equipment as described on page18-20.
–Make sure all equipment is connected to AC outlet and the power is turned on.
–When you operate the projector with a computer and it does not project an image, restart the computer.
60
Problem:
– Solutions
No power
– Plug the power cord of the projector into the AC outlet.
– See if the POWER indicator lights red.
– Wait 90-120 seconds after the projector is turned off when turning
the projector back on. The projector can be turned on after the
POWER indicator turns red. (See on page 21.)
– Check the WARNING indicator. If the WARNING indicator lights red,
the projector cannot be turned on. (See on page 55.)
– Check the projection lamp. (See page 58.)
– Unlock Key lock for the projector Key lock function. (See page 52.)
Image is out of focus.
– Adjust focus of the projector. (See page 25.)
– Provide proper distance between the projector and the projection
screen. (See page 16.)
– Check the projection lens to see if it needs cleaning. (See page 57.)
– Moving the projector from a cool to a warm place may result in
moisture condensation on the projection lens. In such cases, leave
the projector off and wait until condensation evaporates.
No image
– Check the connection between your computer or video equipment
and the projector. (See page 18–20)
– See if the input signal is correctly output from your computer. Some
laptop computers may need to change the setting for monitor output
when connecting to a projector. See your computer’s instruction
manual for the setting.
– It takes about 30 seconds to display an image after turning on the
projector.See if the selected system is corresponding with your
computer or video equipment. (See page 31 and 41)
– Select correct input source once again through menu operation.
(See page 29,30 ,39 and 40)
– Make sure the temperature is not out of the specified Operating
Temperature (41 ˚F ~ 95 ˚F (5 ˚C ~ 35 ˚C)) .
Image is Left/Right reversed.
Image is Top/Bottom reversed.
– Check the Ceiling / Rear function. (See page 50.)
– Check the Ceiling function. (See page 50.)
No sound
–
–
–
–
Check audio cable connection from audio input source.
Adjust the audio source.
Press the Volume+ button. (See page 26.)
Press the Mute button. (See page 26.)
Appendix
–Check the Display function. (See page 47.)
PIN code dialog box appears at start-up.
–PIN code lock is being set. Input a PIN code (1234 or
numbers you have set). (See page 21, 52, 53.)
Computer 2 cannot be selected.
–Select Computer 2 at the Terminal function. (See page 50.)
The Terminal function cannot be selected.
–The Terminal function cannot be selected after Computer 2 is
selected. Select other input source such as Computer 1 or
Video with the INPUT button on the top control, the
COMPUTER button or the VIDEO button on the remote
control so that the Terminal function can be selected.
The Remote Control does not work.
–Check the batteries.
–Make sure no obstruction is between the projector and
remote control.
–Make sure you are not too far from the projector when using
the remote control. Maximum operating range is 16.4’ (5m).
–Make sure the code of the remote control is conformed to
the projector. (See page 51.)
–Unlock Key lock for the remote control in the Key lock
function. (See page 52.)
Cooling fans are still running after
the AC plug is disconnected.
–This is normal condition. Fans are running about 1
minute even after disconnecting the AC plug.
Appendix
Some displays are not seen
during the operation.
WARNING :
High voltages are used to operate this projector. Do not attempt to open the cabinet.
If problems still persist after following all operating instructions, contact the dealer where you purchased the
projector or the service center. Give the model number and explain about the problem. We will advise you
how to obtain service.
The CE Mark is a Directive
conformity mark of the European
Community (EC).
This symbol on the nameplate means the product
is Listed by Underwriters Laboratories Inc. It is
designed and manufactured to meet rigid U.L.
safety standards against risk of fire, casualty and
electrical hazards.
61
Appendix
Menu Tree
Computer Input / Video Input
Input
Go to System (1)
Computer 1 (Analog)
Computer 1 (Digital)
Computer 2
Video
N/A
RGB (PC digital)
RGB (AV HDCP)
N/A
RGB
Go to System (1)
Component
Go to System (2)
RGB (Scart)
N/A
Auto
Go to System (3)
Video
Go to System (3)
S-video
Go to System (3)
Quit
Wired
See owner's manual "Network Set-up and Operation"
Wireless ✽
See owner's manual "Network Set-up and Operation,"
Memory Viewer ✽
See owner's manual of Memory viewer (optionally available)
● N/A - - - not applicable
Sound
✽ .............The menu will be displayed when
connecting device for the input source.
Sound
Volume
Mute
Quit
0 - 63
On / Off
Computer Input
System (1)
Image Select
Dynamic
Standard
Real
Blackboard(Green)
Image 1
Image 2
Image 3
Image 4
Image Adjust
Contrast
Brightness
Color temp.
SVGA 1
Mode 1
Mode 2
----
✽Systems displayed in the System Menu vary
depending on an input signal.
PC Adjust
Auto PC Adj.
Fine sync
Total dots
Horizontal
Vertical
Current mode
Clamp
Display area H
Display area V
Reset
Mode free
Store
Quit
62
0 - 31
Adj.
H-sync freq.
V-sync freq.
Quit
Yes / No
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
Quit
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
Quit
0 - 63
0 - 63
High
Mid
Low
XLow
Red
0 - 63
Green
Blue
0 - 63
0 - 63
Sharpness
Gamma
Reset
Store
0 - 15
0 - 15
Yes / No
Image 1
Image 2
Image 3
Image 4
Quit
Quit
Screen
Normal
True
Wide
Full screen
Digital zoom +
Digital zoom –
Appendix
Setting
Video Input
Setting
System (2)
Auto
1080i
1035i
720p
575p
480p
575i
480i
System (3)
Auto
PAL
SECAM
NTSC
NTSC 4.43
PAL-M
PAL-N
Image Select
Dynamic
Standard
Cinema
Blackboard(Green)
Image 1
Image 2
Image 3
Image 4
Language
English
German
French
Italian
Spanish
Portuguese
Dutch
Swedish
Finnish
Polish
Hungarian
Romanian
Russian
Chinese
Korean
Japanese
Quit
Auto setup
Auto PC adj. / Auto keystone
Keystone
Blue back
Display
Quit
Store / Reset
On / Off
On / Countdown off / Off
Logo
Logo select
Off
Default
User
Capture
Yes / No
Contrast
Brightness
Color
Tint
Color temp.
Red
Green
Blue
Sharpness
Gamma
0 - 63
0 - 63
0 - 63
0 - 15
0 - 15
Noise reduction
Off
L1
L2
Off
L1
L2
Film
Progressive
Reset
Store
Quit
Screen
0 - 63
0 - 63
0 - 63
0 - 63
High
Mid
Low
XLow
Adj.
Ceiling
Rear
Appendix
Image Adjust
Logo PIN code lock
Logo PIN code entry
Off
On
Logo PIN code change
Quit
Quit
On / Off
On / Off
Terminal
Computer 2 /Monitor out
Standby mode
Eco / Normal
Power management
Off
Ready
Shut down
Timer(1-30 Min)
Quit
On start
Lamp control
On / Off
Normal / Auto / Eco
Pointer
Remote control
Security
Yes / No
Image 1
Image 2
Image 3
Image 4
Quit
Spotlight / Pointer
Quit
Code 1 - Code 8
Key lock
Off
Projector
Remote control
Quit
PIN code lock
PIN code lock entry
Off
On1 / On2
PIN code change
Quit
Quit
Normal
Wide
Fan
L1 / L2
Lamp counter
Hour(s) / Reset
Quit
Yes / No
Factory default
Quit
63
Appendix
Indicators and Projector Condition
Check the indicators for projector condition.
Indicators
POWER
WARNING
LAMP
REPLACE
red/green
red
yellow
Projector Condition
The projector is off. (The AC power cord is unplugged.)
✽
The projector is ready to be turned on with the POWER ON-OFF
button.
✽
The projector is operating normally.
✽
The temperature inside the projector is abnormally high. The
projector cannot be turned on. When the projector is cooled down
enough and the temperature returns to normal, the POWER
indicator emits a red light and the projector can be turned on. (The
WARNING indicator keeps blinking.) Check and clean the air filters.
✽
The projector has been cooled down enough and the temperature
returns to normal. When turning on the projector, the WARNING
indicator stops blinking. Check and clean the air filters.
✽
The projector is preparing for stand-by or the projection lamp is
being cooled down. The projector cannot be turned on until cooling
is completed.
✽
The projector detects an abnormal condition and cannot be turned
on. Unplug the AC power cord and plug it again to turn on the
projector. If the projector is turned off again, disconnect the AC
power cord and contact the dealer or the service center for service
and checkup. Do not leave the projector on. It may cause an
electric shock or a fire hazard.
✽
The projector is in the Power management mode.
✽
Either of the projector network, or memory viewer function is in
abnormal condition.
• • • green.
• • • red
• • • blinks green.
• • • blinks red.
• • • off
✽ When the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights yellow.
When this indicator lights yellow, replace the projection lamp with a new one promptly. Reset the lamp
replacement counter after replacement of the lamp. See page 58 and 59.
64
Appendix
Compatible Computer Specifications
Basically this projector can accept the signal from all computers with the V, H-Frequency below mentioned
and less than 140 MHz of Dot Clock.
When selecting these modes, PC adjustment can be limited.
RESOLUTION
640 x 480
720 x 400
640 x 400
640 x 480
640 x 480
640 x 480
640 x 480
640 x 480
640 x 480
––––––––
––––––––
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
H-Freq.
(kHz)
31.47
31.47
31.47
37.86
37.86
37.50
43.269
34.97
35.00
15.734
15.625
35.156
37.88
46.875
53.674
48.08
37.90
34.50
38.00
38.60
32.70
38.00
49.72
48.36
68.677
60.023
56.476
60.31
48.50
44.00
63.48
36.00
62.04
61.00
35.522
46.90
47.00
58.03
60.24
V-Freq.
(Hz)
59.88
70.09
70.09
74.38
72.81
75.00
85.00
66.60
66.67
60.00
(Interlace)
50.00
(Interlace)
56.25
60.32
75.00
85.06
72.19
61.03
55.38
60.51
60.31
51.09
60.51
74.55
60.00
84.997
75.03
70.07
74.92
60.02
54.58
79.35
87.17
(Interlace)
77.07
75.70
86.96
(Interlace)
58.20
58.30
72.00
75.08
ON-SCREEN
DISPLAY
SXGA 1
SXGA 2
SXGA 3
SXGA 4
SXGA 5
SXGA 6
SXGA 7
SXGA 8
SXGA 9
SXGA 10
SXGA 11
SXGA 12
SXGA 13
SXGA 14
SXGA 15
SXGA 16
SXGA 17
SXGA 18
SXGA 19
SXGA 20
SXGA 21
SXGA 22
SXGA 23
MAC21
MAC
MAC
480p
575p
720p
1035i
1080i
1080i
WXGA 1
WXGA 2
WXGA 3
WXGA 4
UXGA 1
UXGA 2
UXGA 3
UXGA 4
RESOLUTION
1152 x 864
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 960
1152 x 900
1152 x 900
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1152 x 900
1280 x 1024
1280 x 1024
1280 x 1024
1400 x 1050
1400 x 1050
1400 x 1050
1152 x 870
1280 x 960
1280 x 1024
––––––––
––––––––
––––––––
––––––––
––––––––
––––––––
1366 x 768
1360 x 768
1376 x 768
1360 x 768
1600 x 1200
1600 x 1200
1600 x 1200
1600 x 1200
H-Freq.
(kHz)
64.20
62.50
63.90
63.34
63.74
71.69
81.13
63.98
79.976
60.00
61.20
71.40
50.00
50.00
63.37
76.97
61.85
46.43
63.79
91.146
63.979
65.346
65.121
68.68
75.00
80.00
31.47
31.25
45.00
33.75
33.75
28.125
48.36
47.70
48.36
56.16
75.00
81.25
87.5
93.75
V-Freq.
(Hz)
70.40
58.60
60.00
59.98
60.01
67.19
76.107
60.02
75.025
60.00
65.20
75.60
H-Freq.
(kHz)
63.98
60.276
31.65
45.00
33.75
33.75
28.125
V-Freq.
(Hz)
60.02
58.069
29.8
60.00
86.00
(Interlace)
94.00
(Interlace)
60.01
72.00
66.00
86.70
(Interlace)
60.18
85.024
60.190
60.116
59.902
75.06
75.08
75.08
59.88
50.00
60.00
Appendix
ON-SCREEN
DISPLAY
VGA 1
VGA 2
VGA 3
VGA 4
VGA 5
VGA 6
VGA 7
MAC LC13
MAC 13
480i
575i
SVGA 1
SVGA 2
SVGA 3
SVGA 4
SVGA 5
SVGA 6
SVGA 7
SVGA 8
SVGA 9
SVGA 10
SVGA 11
MAC 16
XGA 1
XGA 2
XGA 3
XGA 4
XGA 5
XGA 6
XGA 7
XGA 8
XGA 9
XGA 10
XGA 11
XGA 12
XGA 13
XGA 14
XGA 15
MAC 19
60.00
(Interlace)
60.00
(Interlace)
50.00
(Interlace)
60.00
60.00
60.00
72.00
60.00
65.00
70.00
75.00
When an input signal is digital from DVI terminal, refer to the chart below.
ON-SCREEN
DISPLAY
D-VGA
D-480p
D-575p
D-575i
D-480i
D-SVGA
D-XGA
RESOLUTION
640 x 480
640 x 480
768 x 575
768 x 576
640 x 480
800 x 600
1024 x 768
H-Freq.
(kHz)
31.47
31.47
31.25
15.625
15.734
37.879
43.363
V-Freq.
(Hz)
59.94
59.88
50.00
50.00
(Interlace)
60.00
(Interlace)
60.32
60.00
ON-SCREEN
DISPLAY
D-SXGA 1
D-SXGA 2
D-SXGA 3
D-720p
D-1035i
D-1080i
D-1080i
RESOLUTION
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 720
1920 x 1035
1920 x 1080
1920 x 1080
60.00
(Interlace)
60.00
(Interlace)
60.00
(Interlace)
✔Note:
When the input signal is D-SXGA 1, D-SXGA 2, or D-SXGA 3, images may not be displayed properly depending on computers.
65
Appendix
Technical Specifications
Mechanical Information
Projector Type
Dimensions (W x H x D)
Net Weight
Feet Adjustment
Multi-media Projector
9.66" x 2.28" x.6.82" (294.5mm x 69.5mm x 208 mm) (Not including adjustable feet)
5.7 lbs (2.6gs)
0˚ to 10.0˚
Panel Resolution
LCD Panel System
Panel Resolution
Number of Pixels
0.7" TFT Active Matrix type, 3 panels
1,024 x 768 dots
2,359,296 (1,024 x 768 x 3 panels)
Signal Compatibility
Color System
High Definition TV Signal
Scanning Frequency
PAL, SECAM, NTSC, NTSC4.43, PAL-M, PAL-N
480i, 480p, 575i, 575p, 720p, 1035i, and 1080i
H-sync. 15 ~ 100 KHz, V-sync. 50 ~ 100 Hz
Optical Information
Projection Image Size (Diagonal)
Throw Distance
Projection Lens
Projection Lamp
Adjustable from 40" to 300"
3.3’ - 38.7’ (1.0m - 11.8m)
F 1.65 ~ 1.81 lens with f 22.5 mm ~ 27 mm with manual zoom and focus
200W
Interface
Video Input Jack
S-video Input Jack
Audio Input Jacks
Computer Input 1 / DVI-I Input Terminal
Computer Input 2 / Monitor Output Terminal
Computer/ Component Audio Input Jack
Service Port Connector
USB Connector
Audio Output Jack
LAN Connection Terminal
RCA Type x 1
Mini DIN 4 pin x 1
RCA Type x 2
DVI-I Terminal X 1
Analog RGB (Mini D-sub 15 pin) Terminal X 1 (In / Out switchable)
Mini Jack (stereo) x 1
Mini DIN 8 pin x 1
USB Series A connector x 1 / USB Series B connector x 1
Mini Jack (stereo) x 1 (variable)
100 Base-TX (100Mbps) / 10 Base-T (10Mbps)
Audio
Internal Audio Amp
Built-in Speaker
1.0W RMS
1 speaker, ø1.1" (28mm)
Power
Voltage and Power Consumption
AC 100 ~ 120 V (3.2A Max. Ampere), 50 / 60 Hz (The U.S.A and Canada)
AC 200 ~ 240 V (1.6A Max. Ampere), 50 / 60 Hz (Continental Europe and The U.K.)
Operating Environment
Operating Temperature
Storage Temperature
41 ˚F ~ 95 ˚F (5 ˚C ~ 35 ˚C)
14 ˚F ~ 140 ˚F (-10˚C ~ 60 ˚C)
Remote Control
66
Battery
Operating Range
Dimensions
Net Weight
AAA, UM-04 or LR03 Type x 2
16.4’ (5m) / ±30˚
1.8”(W) x 1.0”(H) x 5.7”(D) (45mm x 25mm x 145mm)
3.5oz (99g) (including batteries)
Laser Pointer
Class II Laser (Max. Output : 1m W / Wave length : 640-660nm)
Appendix
Accessories
Owner's Manual and Owner's Manual "Network Set-up and Operation"
AC Power Cord
Remote Control and Batteries
USB Cable
DVI-VGA Cable
Lens Cover with String
PIN Code Label
CD-ROM
Soft Carrying Case
● The specifications are subject to change without notice.
● LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are effective, a
tiny fraction of the pixels (0.01% or less) may be ineffective by the characteristics of the LCD panels.
Optional Parts
Appendix
The parts listed below are optionally available. When ordering those parts, give the item name and Model No.
to the sales dealer.
Model No.
COMPONENT-VGA Cable
: AH-98771 (POA-CA-COMPVGA)
SCART-VGA Cable
: AH-98881 (POA-CA-SCART)
Ceiling Hanger
: POA-CHS-US01 (for low ceiling)
POA-CHL-UL01 (for high ceiling)
POA-CHS-US02 (for low ceiling)
POA-CHL-UL02 (for high ceiling)
POA-CHB-XU70
USB Memory
: WL-30 (This is used for Memory Viewer operation.)
USB Wireless LAN adapter
: WL-10 (This is used for Wireless LAN operation.)
67
Appendix
PJ Link Notice
This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information
System Industries Association). This projector supports all commands defined by PJLink Class 1 and is verified
conformance with PJLink Standard Class 1.
For PJ Link password, see p49 on owner's manual "Network Set-up and Operation".
Projector Input
PJLink Input
Computer1 (Analog)
Parameter
RGB 1
11
RGB (PC digital)
DIGITAL 1
31
RGB (AV HDCP)
DIGITAL 2
32
RGB
RGB 2
12
Component
RGB 3
13
RGB (Scart)
RGB 4
14
Auto
VIDEO 1
21
Video
VIDEO 2
22
S-video
VIDEO 3
23
Wired
NETWORK 1
51
Wireless
NETWORK 2
52
Memory Viewer
STORAGE 1
41
Computer1
(Digital)
Computer2
Video
PJLink is a registered trademark of JBMIA and pending trademark in some countries.
68
Appendix
Configurations of Terminals
COMPUTER IN 2 /COMPONENT IN /MONITOR OUT (ANALOG)
Terminal : Analog RGB (Mini D-sub 15 pin)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Red (R/Cr) Input / Output
Green (G/Y) Input / Output
Blue (B/Cb) Input / Output
----Ground (Horiz.sync.)
Ground (Red)
Ground (Green)
Ground (Blue)
----Ground (Vert.sync.)
Ground / --------Horiz. sync. Input/Output (Composite H/V sync.)
Vert. sync.
-----
4
3
11
12
6
7
8
9
10
5
13
14
15
1
2
DVI-I TERMINAL (DIGITAL/ANALOG)
C1 C2
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
Analog Red Input
Analog Green Input
Analog Blue Input
Analog Horiz. sync
Analog Ground (R/G/B)
1
2
3
4
5
6
7
8
T.M.D.S. Data2–
T.M.D.S. Data2+
T.M.D.S. Data2 Shield
No Connect
No Connect
DDC Clock
DDC Data
Analog Vert. sync
C3 C4
C5
TX +
TX –
RX +
-----
1
1
2
3
4
2
4
VCC(5V)
– DATA
+ DATA
Ground
4
3
1
2
3
4
3
2
T.M.D.S. Data1–
T.M.D.S. Data1+
T.M.D.S. Data1 Shield
No Connect
No Connect
+5V Power
Ground (for +5V)
Hot Plug Detect
17
18
19
20
21
22
23
24
T.M.D.S. Data0–
T.M.D.S. Data0+
T.M.D.S. Data0 Shield
No Connect
No Connect
T.M.D.S. Clock Shield
T.M.D.S. Clock+
T.M.D.S. Clock–
USB CONNECTOR (Series B)
USB CONNECTOR (Series A)
1
9
10
11
12
13
14
15
16
Appendix
C1
C2
C3
C4
C5
1
2
3
4
Vcc
- Data
+ Data
Ground
LAN TERMINAL
5
6
7
8
----RX –
---------
87654321
SERVICE PORT CONNECTOR
Terminal : Mini DIN 8-PIN
8
5
7 6
4 3
2 1
1
2
3
4
RXD
--------GND
5
6
7
8
RTS / CTS
TXD
GND
GND
69
Appendix
PIN Code Number Memo
Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or
lost the number and unable to operate the projector, contact the service station.
PIN Code Lock No.
Factory default set No: 1 2 3 4*
Logo PIN Code Lock No.
Factory default set No: 4 3 2 1*
*Should the four-digit number be changed,
the factory set number will be invalid.
While the projector is locked with the PIN code...
Put the label below (supplied) on in a prominent place of the
projector's body while it is locked with a PIN code.
70
A-key to better communications
U.S.A.
Canada
EIKI International, Inc.
30251 Esperanza
Rancho Santa Margarita
CA 92688-2132
U.S.A.
Tel : 800-242-3454 (949)-457-0200
Fax : 800-457-3454 (949)-457-7878
E-Mail : usa@eiki.com
EIKI CANADA - Eiki International, Inc.
P.O. Box 156, 310 First St. - Unit 2,
Midland, ON, L4R 4K8, Canada
Tel : 800-563-3454 (705)-527-4084
Fax : 800-567-4069 (705)-527-4087
E-Mail : canada@eiki.com
Deutschland & Österreich
EIKI Deutschland GmbH
Am Frauwald 12
65510 Idstein
Deutschland
Tel : 06126-9371-0
Fax : 06126-9371-14
E-Mail : info@eiki.de
Eastern Europe
EIKI CZECH spol. s.r.o.
Umelecká 15
170 00 Praha 7
Czech Republic
Tel : +42 02 20570024
+42 02 20571413
Fax : +42 02 20571411
E-Mail : easterneurope@eiki.de
Japan & Worldwide
EIKI Industrial Company Limited.
4-12 Banzai-Cho, Kita-Ku, Osaka,
530-0028 Japan
Tel : +81-6-6311-9479
Fax : +81-6-6311-8486
WorldWide Website http://www.eiki.com
Printed in Japan
Part No. 610 326 5407 (1AA6P1P5028-- MY5B)
© 2005 Eiki International, Inc.