AlertWerks™ ServSensor Monitoring Hubs and

AlertWerks™ ServSensor Monitoring Hubs and Intelligent Sensors
Guard your mission-critical IT equipment
BLACK BOX
against physical threats—remotely.
®
» Monitors temperature, humidity, water, airflow,
motion, and voltage.
» Notifies you by audible alarms, e-mail, SNMP,
text messages, or fax.
EME134A-R2
888-433-5049 | blackbox.com/go/AlertWerks
Remote Monitoring & Security
About Black Box
Black Box Network Services is your source for an extensive range of networking and infrastructure products. You’ll find everything
from cabinets and racks and power and surge protection products to media converters and Ethernet switches—all supported by
free, live 24/7 Tech Support available in 30 seconds or less.
Black Box Tech Support:
FREE! Live. 24/7.
Great Tech Support is just 30 seconds away
at 724-746-5500 or blackbox.com.
FREE— The advice is absolutely FREE whether you buy or not!
Live — Our techs answer your calls live from our headquarters
near Pittsburgh, PA.
24/7 — Call our product experts with questions anytime
day or night.
Why buy from Black Box?
Exceptional value. Exceptional Tech Support. Period.
Recognize any of these situations?
• You wait more than 30 minutes to get through
to a vendor’s tech support.
• The so-called “tech” is a customer service rep
who can’t help you.
• You don’t have a purchase order number
or a credit card so the tech won’t help you.
• It’s 9 p.m. and you need help, but your vendor’s
tech support line is closed.
2|
Even though network managers routinely pay anywhere from 10 to 20% of their
overall purchase price for a basic service and support contract, the technical support
and service they receive often falls far short of their expectations—and certainly isn’t
worth what they paid.
At Black Box, we guarantee the best value and the best support. You can even
consult our Tech Support experts before, during, and long after your transaction.
It’s all part of our commitment to your success.
888-433-5049 | blackbox.com/go/AlertWerks
Remote Monitoring & Security
Table of Contents
Environmental Monitoring Solutions........................................................................................................................................................... 4
Buyer’s Guides....................................................................................................................................................................................... 5–7
ServSensor V4E (EME134A-R2)............................................................................................................................................................... 8–9
ServSensor V4EL (EME144A).................................................................................................................................................................. 8–9
ServSensor Expansion Units (EME1X8, EME1P8, EME1DC16)............................................................................................................ 8–9
Cameras (SCA201, SCE201, EME1FC-NTSC, EME1FC-PAL).................................................................................................................... 9
ServSensor Hubs (EME105A–EME106A, EME108A-R2, EME109A-R2, EME110A-R2, EME155A, EME158A).......................................... 10–11
ServSensor Junior (EME102A-R2–EME104A-R2, EME152A–EME154A)......................................................................................................12
Dry Contacts for ServSensor Junior (EME1DC-015, EME1DC-060, EME1DC-100, EME1DC-UPG)...........................................................12
ServSensor Contact (EME111A-20-R2–EME113A-20-R2, EME111A-60–EME113A-60)................................................................................13
Intelligent Sensors...............................................................................................................................................................................14–16
Temperature Sensors (EME1T1-001, EME1T2-005, EME1T3-015, EMEDTEMP, EMEDTEMP4, EMEDTEMP8)..........................................14
Dual Temperature/Humidity Sensors (EME1TH1-001, EMET1H2-005, EME1TH3-015)..........................................................................14
Thermocouples (EME1TCPJ, EME1TCPK, EME1TCAJ-005, EME1TCAK-005, EME1TCBJ-005, EME1TCBK-005)......................................14
Water Sensors (EME1W1-015, EME1W1-060, EMETW1-100)...............................................................................................................14
Rope Water Sensors (EMERW-020, EMERWE-010)..............................................................................................................................14
Intelligent Rope Water Sensors (EMELW-020, EMELW-010).................................................................................................................14
Security Sensors/Contacts (EME1Y1-015, EME1Y1-060, EME1Y1-100).................................................................................................14
Airflow Sensor (EME1F1-005-R2)........................................................................................................................................................14
Dry-Contact Sensors (EME1K1-015, EME1K1-060, EME1K1-100)..........................................................................................................14
Voltage Sensors (EME1A1-005, EME1D1-005-R2)................................................................................................................................15
Power Monitors (EME1PM, EME2PM-R2, EME3PM, EME4PM)............................................................................................................15
Smoke Detector Sensor (EME1S2-005)................................................................................................................................................15
4-20 mA Converter (EME1C1-005)......................................................................................................................................................15
Digital I/O Sensors (EME1J8-005, EME1KJ8-005)................................................................................................................................15
Siren and Strobe Light (EME1SS-005)..................................................................................................................................................15
Motion Detector Sensor (EME1M1-005-R2)........................................................................................................................................15
Rackmount Kits (EMEDIN, EMESMB, EMEDRMK, EMESDIN)................................................................................................................15
Power Switches (EME1P1C-005, EME1P1O-005, EME1P2C-005, EME1P2O-005, EME1PDCC-005, EME1PDCO-005)............................16
Power Adapters (EME120-PS, EME100-DC).........................................................................................................................................16
Power Monitor Sensors (EME1PMS1, EME1PMS2, EME1PMS3)............................................................................................................16
Rope Fuel Sensor, 3-Meter (EME1RF-003)...........................................................................................................................................16
Ultrasonic Fuel Level Sensor (EME1FL-015)...........................................................................................................................................16
Split-Core Current Transformers (EME1CT100, EME1CT200, EME1CT300)...........................................................................................16
We are here to help! If you have any questions about your application, our products,
or this brochure, please contact Black Box Tech Support at 724-746-5500.
You’ll be live with one of our technical experts in less than 30 seconds.
FREE, live help in 30 seconds or less!
|3
Remote Monitoring & Security
Guard your mission-critical IT equipment against physical
What’s an environmental
monitoring system?
Beyond virus protection.
It has become almost automatic to protect
your data center by backing up your servers,
installing firewalls and virus protection, and
keeping the protection up-to-date.
But what about more tangible threats? Do
you have hot spots in your racks? If the cooling
system shuts down, how will you know when
temperatures climb out of control? Are you
alerted to humidity changes or water leaks
that threaten your equipment?
Planning for the unexpected is a critical
task because there are more systems
performing mission-critical functions than ever
before. These systems are often deployed without the proper environmental infrastructure to
support them. Equipment density is increasing
constantly, which is creating more stress on
ventilation and power.
That’s where Black Box’s environmental
monitoring systems enter the picture.
The top three IT risks:
1. Environmental disruption.
The number one cause of downtime
for remote locations, environmental problems
go beyond fires and floods and affect as
much as 30% of a company’s mission-critical
infrastructure. Cooling and power are key
points of exposure and increase as equipment
density does.
2. Unnecessary risk.
When systems are housed in less-than-optimal
settings, or are in remote and unsupervised
locations, any error causes downtime. Yet, it’s
not practical to have someone babysitting the
servers. We offer more effective ways to keep
track of your equipment.
Environmental monitoring products enable
you to actively monitor the conditions in your
rack, server room, data center, or anywhere else
you need to protect critical assets. Conditions
monitored include extreme temperatures, humidity,
power spikes and surges, water leaks, smoke,
and chemical materials. With proper environmental
monitoring, you’re alerted to any conditions that
could have an adverse effect on your missioncritical equipment. These products can also
alert you to potential damage from human
error, hacking, or prying fingers.
Environmental monitors consist of three
main elements: a base unit, probes or sensors,
and network connectivity and integration.
The base units may contain one or more built-in
sensors, as well as ports for hooking up external
probes. Additionally, they include an Ethernet
port and have software for remote configuration
and graphing. This software may also work
with existing network management software,
such as SNMP systems.
4|
• Reduced downtime — When things go
wrong, you’re the first to know. Minimize
downtime by being alerted about conditions
that cause damage to servers and other
network devices.
• Increased profits—Black Box environmental
monitoring systems are easy to implement.
Also, they help you cut replacement equipment
costs and redistribute your workforce more
effectively.
• Increased employee satisfaction — With built-in notification features like e-mail,
SMS, and SNMP traps, a remote monitoring
system enables employees to better manage
their work.
Features:
Measurement (see chart below).
The environmental monitoring appliance
displays the values measured by the attached
probes, e.g. temperature, humidity, airflow,
status of dry contact, door, motion detector,
and other sensors.
Data collecting and graphing
(see chart below).
The measurements are periodically stored in
the internal memory or external storage media
and displayed as graphs.
Alerting (see chart on facing page).
When the measured value exceeds the
predefined threshold, it triggers an alert: a blinking
LED on the front panel, an audible alarm, SNMP
trap, e-mail, etc. The environmental monitoring
appliance can also activate an external alarm
system like a siren or strobe light.
Temp Rack 03
66° F (19° C)
Humidity Rack 03
34%
Measurement
3. Sabotage.
Regardless of the probability, terrorism is
now something each of us must plan for. Your
systems can also be brought down from within
if the proper security safeguards are not in place.
Benefits of environmental
monitoring:
Data Collecting and Graphing
Applications:
The Black Box AlertWerks System consists
of SNMP-enabled, Web-based monitors that
alert the user to any abnormal conditions.
AlertWerks monitors multiple environmental
conditions, including temperature, humidity,
airflow, smoke, security, and voltage. Black Box has
complete solutions for a variety of applications,
including:
• Data center monitoring
• Computer room monitoring
• Rackmount industrial equipment
• Telecommunications
• UPS/battery backup
• Educational institutions
• Food and beverage applications
• Buildings/warehouses
• Air conditioner/refrigerants/freezer monitoring
• Greenhouses
888-433-5049 | blackbox.com/go/AlertWerks
Remote Monitoring & Security
threats — from temperature extremes to water damage.
Buyer’s Guide | AlertWerks Sensor Hub Features
For product details, see pages 8–13 or go to blackbox.com.
ServSensor V4E
(EME134A-R2)
ServSensor V4EL
(EME144A, EME149A-20,
EME149A-60, EME149D-20,
EME149D-60)
ServSensor
(EME108A-R2,
EME158A)
ServSensor 4
(EME105A,
EME155A)
ServSensor Junior
(EME102A-R2)
EME152A)
ServSensor Contact
(EME111A-20-R2,
EME111A-60)
500*
500*
8
4
2
8
2/60/500*
2/60/500*
8
4
10†
28 / 68 ‡
4
—
—
—
—
—
Relay output
4
4
4
4
4
4
Siren and strobe light
4
4
4
4
4
4
SNMP trap
4
4
4
4
4
4
E-mail
4
4
4
4
4
4
SMS
4**
4**
4§
4§
4§
4§
MMS
4**
No
—
—
—
—
Phone call
4††
4††
—
—
—
—
Skype® call
4
4
—
—
—
—
FTP upload
4
4
—
—
—
—
Picture log
4
4
—
—
—
—
Wakeup/shutdown
4
4
—
—
—
—
Virtual sensors
4
4
—
—
—
—
Features
Intelligent sensors supported
(maximum)
Dry contacts supported
(maximum)
Cameras supported (maximum)
Alerting
*Requires expansion hubs.
†With two 5-dry contact input cables and license.
‡20 and 60 dry contacts respectively, plus up to 8 dry
contacts at the standard sensor ports.
§Requires third-party e-mail to SMS gateway.
**Requires third-party GSM USB modem.
†† Requires third-party voice modem.
PT Dome Camera
(SCA201), p. 9
ServSensor V4E
(EME134A-R2)
Router
Switch
Web-Based Administration
Workstation
with E-mail
Web-Bound Monitoring
Internet
E-mail Notification
SMS
(Short Message Service)
AlertWerks™
Intelligent
Sensors,
pp. 14–16
Workstation
SNMP Traps
ServSensor Jr.
(EME102A-R2), p. 12
Airflow Sensor, p. 14
Temperature Sensor, p. 14
FREE, live help in 30 seconds or less!
|5
Remote Monitoring & Security
Buyer’s Guide | AlertWerks Sensor Hub Compatibility
For product details, see pages 8–16 or go to blackbox.com.
ServSensor
ServSensor 4
ServSensor Contact
ServSensor
Junior
Sensor Code
ServSensor V4E
ServSensor
V4EL
Temperature Sensor, Standard, 1-foot (0.3-m) Cable
EME1T1-001
Yes
Yes
Yes
Yes
Temperature Sensor, Remote, 5-foot (1.5-m) Cable
EME1T2-005
Yes
Yes
Yes
Yes
Sensor
Temperature/Humidity
Temperature Sensor, Waterproof, 15-foot (4.5-m) Cable
EME1T3-015
Yes
Yes
Yes
Yes
Dual Temperature Humidity Sensor, Standard, 1-foot (0.3-m) Cable
EME1TH1-001
Yes
Yes
Yes
Yes
Dual Temperature Humidity Sensor, Remote, 5-foot (1.5-m) Cable
EME1TH2-005
Yes
Yes
Yes
Yes
Dual Temperature Humidity Sensor, Waterproof, 15-foot (4.5-m) Cable
EME1TH3-015
Yes
Yes
Yes
Yes
EMEDTEMP
Yes
Yes
No
No
Temperature Sensor, Daisychainable, 4-Pack
EMEDTEMP4
Yes
Yes
No
No
Temperature Sensor, Daisychainable, 8-Pack
EMEDTEMP8
Yes
Yes
No
No
Thermocouple Adapter, J-Type
EME1TCAJ-005
Yes
Yes
No
No
Thermocouple Adapter, K-Type
EME1TCAK-005
Yes
Yes
No
No
Thermocouple Probe & Adapter, J-Type
EME1TCBJ-005
Yes
Yes
No
No
Thermocouple Probe & Adapter, K-Type
Temperature Sensor, Daisychainable
EME1TCBK-005
Yes
Yes
No
No
Thermocouple Probe, J-Type
EME1TCPJ
Yes
Yes
No
No
Thermocouple Probe, K-Type
EME1TCPK
Yes
Yes
No
No
I/O
4-20 mA Converter, 5-foot (1.5-m) Cable
EME1C1-005
Yes
Yes
Yes
Yes
Dry-Contact Sensor, 15-foot (4.5-m) Cable
EME1K1-015
Yes
Yes
Yes
Yes
Dry-Contact Sensor, 60-foot (18-m) Cable
EME1K1-060
Yes
Yes
Yes
Yes
Dry-Contact Sensor, 100-foot (30.5-m) Cable
EME1K1-100
Yes
Yes
Yes
Yes
Dry-Contact Sensor, 5 Inputs, 15-foot (4.5-m) Cable
EME1DC-015
No
No
No
Yes
Dry-Contact Sensor, 5 Inputs, 60-foot (18-m) Cable
EME1DC-060
No
No
No
Yes
Dry-Contact Sensor, 5 Inputs, 100-foot (30.5-m) Cable
EME1DC-100
No
No
No
Yes
EME1DC16
Yes
Yes
No
No
EME1J8-005
Yes
Yes
No
No
EME1KJ8-005
Yes
Yes
No
No
EME1P8
Yes
Yes
No
No
Airflow Sensor, 5-foot (1.5-m) Cable
EME1W1-015
Yes
Yes
Yes
No
Photoelectric Smoke Detector, 5-foot (1.5-m) Cable
EME1W1-060
Yes
Yes
Yes
Yes
Water Sensor, 15-foot (4.5-m.) Cable
EME1W1-015
Yes
Yes
Yes
Yes
Water Sensor, 60-foot (18-m.) Cable
EME1W1-060
Yes
Yes
Yes
Yes
Water Sensor, 100-foot (30.5-m.) Cable
EME1W1-100
Yes
Yes
Yes
Yes
Rope Water Sensor, 20-foot (6.0-m) Cable
EMERW-020
Yes
Yes
Yes
Yes
Rope Water Sensor Extension, 10-foot (3.0-m) Cable
EMERWE-010
Yes
Yes
Yes
Yes
Intelligent Rope Water Sensor, 10-foot (3.0-m) Extension
EMELW-010
Yes
Yes
Yes
No
Intelligent Rope Water Sensor, 20-foot (6.0-m)
EMELW-020
Yes
Yes
Yes
No
Rope Fuel Sensor, 9.8-foot (3-m)
EME1RF-003
Yes
Yes
Yes
No
AlertWerks Ultrasonic Fuel Level Sensor, 15-foot (4.5-m.) Cable
EME1FL-015
Yes
Yes
No
No
Dry Contact Expansion Hub for V4E and V4P
Digital I/O Sensor, (8) Dry Contacts, with 5-foot (1.5-m) Cable
Digital I/O Sensor, (2) RJ-45 to (8) Dry Contacts, with 5-foot (1.5-m) Cable
ServSensor Expansion Unit, 8-Port Relay Hub for V4E and V4P
Air/Smoke
Fluids
6|
888-433-5049 | blackbox.com/go/AlertWerks
Remote Monitoring & Security
Buyer’s Guide | AlertWerks Sensor Hub Compatibility
For product details, see pages 8–16 or go to blackbox.com.
ServSensor
ServSensor 4
ServSensor Contact
ServSensor
Junior
Sensor Code
ServSensor V4E
ServSensor
V4EL
Motion Detection Sensor, 5-foot (1.5-m) Cable
EME1M1-005-R2
Yes
Yes
Yes
Yes
Security Sensor/Contact, 15-foot (4.5-m) Cable
EME1Y1-015
Yes
Yes
Yes
Yes
Security Sensor/Contact, 60-foot (18-m) Cable
EME1Y1-060
Yes
Yes
Yes
Yes
Security Sensor/Contact, 100-foot (30.5-m) Cable
EME1Y1-100
Yes
Yes
Yes
Yes
Siren and Strobe Light, 5-foot (1.5-m) Cable
EME1SS-005
Yes
Yes
Yes
Yes
AC Voltage Sensor, 5-foot (1.5 m) Cable
EME1A1-005
Yes
Yes
Yes
Yes
DC Voltage Sensor, 5-foot (1.5 m) Cable
EME1D1-005
Yes
Yes
Yes
Yes
Sensor
Security
Electricity
Power Monitor, 110-VAC, 3-Phase, 30 Amps
EME1PM
Yes
Yes
No
No
Power Monitor, 220-VAC, 3-Phase, 100 Amps
EME2PM-R2
Yes
Yes
No
No
Power Monitor, 110 VAC, 1-Phase, 100 Amps
EME3PM
Yes
Yes
No
No
Power Monitor, 220-VAC, 1-Phase, 100 Amps
EME4PM
Yes
Yes
No
No
Power Monitor Sensor, Single-Phase, 100V, 60 Hz
EME1PMS1
Yes
Yes
No
No
Power Monitor Sensor, Single-Phase, 220–240V, 50 Hz
EME1PMS2
Yes
Yes
No
No
Power Monitor Sensor, Three-Phase, 100–500V, 60 Hz
EME1PMS3
Yes
Yes
No
No
Split-Core Current Transformer, 100/5A
EME1CT100
Yes
Yes
No
No
Split-Core Current Transformer, 200/5A
EME1CT200
Yes
Yes
No
No
Split-Core Current Transformer, 300/5A
EME1CT300
Yes
Yes
No
No
Power Switch, 110V, Normally Closed, 5-foot (1.5-m) Cable
EME1P1C-005
Yes
Yes
Yes
Yes
Power Switch, 110V, Normally Open, 5-foot (1.5-m) Cable
EME1P1O-005
Yes
Yes
Yes
Yes
Power Switch, 220V, Normally Closed, 5-foot (1.5-m) Cable
EME1P2C-005
Yes
Yes
Yes
Yes
Power Switch, 220V, Normally Open, 5-foot (1.5-m) Cable
EME1P2O-005
Yes
Yes
Yes
Yes
Power Switch, 48 VDC, Normally Closed, 5-foot (1.5-m) Cable
EME1PDCC-005
Yes
Yes
Yes
Yes
Power Switch, 48 VDC, Normally Open, 5-foot (1.5-m) Cable
EME1PDCO-005
Yes
Yes
Yes
Yes
Pan/Tilt Dome Camera, NTSC
SCA201
Yes
No
No
No
Pan/Tilt Dome Camera, PAL
SCE201
Yes
No
No
No
EME1FC-NTSC
Yes
No
No
No
EME1FC-PAL
Yes
No
No
No
Power Switches
Cameras
Universal Mount Camera, NTSC
Universal Mount Camera, PAL
Mounting
Rackmount DIN Rail
Dual Rackmount Bracket
Split Rackmount DIN Rail Bracket
EMEDIN
No
No
No
Yes
EMEDRMK
Yes
Yes
Yes
No
EMESDIN
Yes
Yes
Yes
No
EME1X8
Yes
Yes
No
No
EME1P8
Yes
Yes
No
No
EME1DC16
Yes
Yes
No
No
Expansion
ServSensor Expansion Unit, 8-Port Sensor Hub
ServSensor Expansion Unit, 8-Port Relay Hub
ServSensor Expansion Unit, Dry Contact Expansion Hub
FREE, live help in 30 seconds or less!
|7
Remote Monitoring & Security
AlertWerks ServSensor V4E Hub, V4EL Hubs
Real-time, extensive environmental and video monitoring and alerting system.
• Supportuptoeightplug-and-play
IntelligentSensors(pages 14–16).
• Canbedaisychainedtoexpansion
hubs, increasing the total sensor
count up to 500.
• V4Emodelalsosupportsup
tofoursurveillancecameras(seefacing
pagefortheAlertWerkscameras).
• Notifyyouofalarmsinavariety
ofways,includinge-mail,SNMP,
and text messages.
• Canalsomonitorupto80SNMP
devices.
• MonitorsexternaldevicesviaSNMP
orIP“ping.”
• Manageablethroughaneasy-to-use
Web interface.
• FullSNMPv1,v2,andv3compliance.
• Includeacombinationtemperature/
humidity sensor.
• FF WARRANTY—1Year
The AlertWerks ServSensor V4E family
enables you to integrate environmental sensors
and surveillance cameras into one seamless
remote monitoring system that watches over
your premises. Each ServSensor supports up
to eight AlertWerks Intelligent Sensors (pages
14–16). Sensors automatically configure and
go on-line, ready to report any status change.
Choose from a wide variety of sensors, including
temperature, humidity, water, airflow, motion,
and voltage.
Each hubs gathers and displays sensor data
in a easy-to-use, Web-based user interface,
automatically generating day, week, month,
and year graphs for each sensor. The data can be
downloaded in a text file for external processing
or remotely polled and saved automatically to
a PC.
The Notification Wizard enables the hub to
notify you of changes in sensor status in real time.
Configure each notification by choosing a sensor,
selecting the alarm condition, and defining what
to do when the alarm is triggered. You can
choose to be notified in a variety of ways: audible
alarm, SNMP trap, e-mail, text message to your
phone, or fax.
8|
Access the clear, easy-to-use graphical interface from your Web browser,
like Alert log (left) and Sensor configurations (right).
For instance, you can have the system e-mail
you if the temperature in your data center goes
over 75° F and send you a text message if the
temperature continues to climb and goes over
80° F.
To prevent false alarms, AlertWerks allows
extensive filtering of events. You can limit events
based on the time of day or the day of the week.
You can also limit the number of alerts per hour,
so that you are not swamped with messages.
This is especially important with a sensor like
the motion detector where you may want to
process an event only after hours.
You can have Linux® devices automatically
send a shutdown message to your Linux or
Windows® based servers — so if there is a power
outage, for example, you can rest assured that
your servers will be safely and automatically shut
down before your UPS runs out.
ServSensor V4E
The AlertWerks ServSensor V4E (EME134A-R2)
enables you to integrate environmental sensors
and surveillance cameras into one seamless
remote monitoring system that watches over
your premises. Use it to monitor data centers,
offices, or anywhere it's important to keep an
eye on conditions on the ground.
The ServSensor V4E supports up to four
AlertWerks PT Dome Cameras. You can also use
it with a wide range of analog cameras — your
existing security cameras, sophisticated nightvision cameras, outdoor cameras, or low-cost
CCTV cameras. The ServSensor V4E supports
video of up to 640 x 480 dpi from up to four
cameras. Set it to scan between cameras or show
all cameras at once. It has enough memory to
store up to 2320 pictures.
A built-in 4-port Pelco-D-compatible pan/tilt
controller eliminates the need for expensive
additional controllers and enables you to move
and zoom cameras from the Web interface. See
and organize data from the graphical interface.
Plus, it can stream video and sensor information
directly to your phone or PDA.
Use the four expansion ports on the front
of the ServSensor V4E to add even more sensor
and dry contact ports with Expansion Units.
The ServSensor EXP8 (EME1X8) provides
additional ports for eight Intelligent Sensors;
the ServSensor EXPDC16 (EME1DC16) provides
16 dry contacts. (These units only work with
the V4E.)
ServSensor V4EL
ServSensor V4EL models have all the features
of the ServSensor V4E except support for video
cameras, enabling you to take advantage of the
capabilities of a high-end hub without paying for
video you don’t need.
You can order the V4EL with 20 or 60 integral
dry-contact inputs to support third-party sensors
or with no dry contacts. The V4EL is also available
in DC-powered versions that accept 40–60-VDC
power input via terminal block.
888-433-5049 | blackbox.com/go/AlertWerks
Remote Monitoring & Security
Automatically generated graphs for each sensor.
EME134A-R2: top: front view;
bottom: rear view
tech specs
Audio — Sampling Rate: 8 kHz
Configuration — Via Web browser (HTTP / HTTPS)
Encryption — SSL 128 bit (HTTPS), SNMPv3
Environmental — Temperature: 32 to 131° F
(0 to 55° C);
Humidity: 20 to 80%, noncondensing;
Altitude: 0 to 9842 ft. (0 to 3000 m)
Memory — EME134A-R2: 64 MB SDRAM,
128 MB NVRAM;
EME144A-R2, EME149A-20, EME149D-20,
EME149A-60, EME149D-60:
128 MB SDRAM, 128 MB NVRAM
Operating System — Embedded Linux
Processor — EME134A-R2: 32-bit Xscale PXA270,
312 MHz;
EME144A-R2, EME149A-20, EME149D-20,
EME149A-60, EME149D-60: iMX25 CPU
Protocols Supported (Client) — DHCP, DNS, SMTP, (S)
NTP, SNMP
Video — EME134A-R2: Sampling resolution:
Up to 640 x 480 dpi;
Frame rate: Up to 30 fps;
Color depth: Up to 16 bit;
Streaming refresh rate: Up to 15 fps @ 320 x 240 dpi
CE Approval — Yes
Connectors — All: (8) RJ-45 sensor,
(1) RJ-45 10BASE-T/100BASE-TX Ethernet,
(1) USB Type A,
(1) 2-pin RS-485;
EME134A-R2 also:
(4) BNC F video,
(3) 3.5-mm audio jacks,
(4) 2-pin RS-485 PTZ.
(1) DB9 M RS-232/V.24 console port;
EME149A-20, EME149D-20 also:
(20) 2-pin dry contacts;
EME149A-60, EME149D-60 also:
(60) 2-pin dry contacts
Indicators — EME134A-R2, EME144A-R2: (1) Power,
(1) Link, (1) Activity, (8) Status, (8) Online;
EME149A-20, EME149D-20: (1) Power,
(1) Link, (1) Activity, (8) Status, (8) Online,
(20) Status, (20) Online;
EME149A-60, EME149D-60:
(1) Power, (1) Link, (1) Activity, (8) Status, (8) Online,
(60) Status, (60) Online
Power — EME134A-R2, EME144A-R2, EME149A-20,
EME149A-60: Autosensing 100– 240 VAC, 47–63 Hz
external power supply;
EME149D-20, EME149D-60: 40–60-VDC terminal
block
Size — EME134A-R2: 1.8"H x 10.9"W x 5.4"D
(4.6 x 27.6 x 13.8 cm);
EME144A-R2: 1.8"H x 8.5"W x 5.4"D
(4.6 x 21.6 x 13.8 cm);
EME149A-20, EME149A-60: 1.8"H x 17.2"W x 5"D
(4.6 x 43.6 x 12.7 cm);
EME149D-20: 1.8"H x 17.1"W x 5.4"D (4.6 x 45.2 x 13.8 cm);
EME149D-60: 3.5"H x 18"W x 5.4"D (8.9 x 45.2 x 13.8 cm)
AlertWerks Cameras
High-resolution dome cameras.
Item
Code
AlertWerks ServSensor V4E
EME134A-R2
AlertWerks ServSensor V4EL
No Dry Contacts
EME144A-R2
with 20 Dry Contacts
EME149A-20
with 20 Dry Contacts, DC-Powered EME149D-20
with 60 Dry Contacts
EME149A-60
with 60 Dry Contacts, DC-Powered EME149D-60
ServSensor Expansion Units
8-Port Sensor Hub
EME1X8
8-Port Relay Hub
EME1P8
16-Port Dry Contact Hub
EME1DC16
You may also need…
Rackmount Bracket for EME134A-R2 and
(1) Expansion Hub
EMEDRMK
Rackmount Bracket for EME134A-R2 with Integral
Half-Width DIN Rail for Mounting Sensors
EMESDIN
DIN Rail Mounting Bracket for Sensors EMESMB
EME1FC-NTSC, EME1FC-PAL camera shown
SCA201, SCE201 camera shown
• High-resolution 1⁄3" Sony™ CCD cameras.
• Dome cameras feature remote pan and tilt;
universal-mount cameras are stationary.
• Clear, sharp pictures, even in low light conditions.
• Horizontal resolution of 640 pixels.
• A precision, custom-designed stepper motor
moves the dome camera over 330° (pan)
and 160° (tilt) and can be controlled by
the ServSensor V4E via its Web interface.
• FF WARRANTY — 1 Year
Pan/Tilt
Terminal Block
BNC Video
Connector
Power
Input
Power
Input
BNC Video
Connector
TECH SPECS
Engine — All models: Image sensor: Type: 1⁄3" Interline
CCD; Min. illumination: 0.5 Lux / F1.2;
Picture elements: 640(H) x 480(V);
Dome models: S/N ratio: 45dB or more (AGC off)
Environmental — Temperature: 32 to 104° F
(0 to 40° C); Humidity: 10–80% relative humidity,
noncondensing
Opticals — Lens type: fixed; Focal length: 3.6 mm;
Viewing angle: 92°;
Video resolution: 330 TV lines;
Features: auto white balance,
electronic iris 1/50 to 1/100,000;
P/T: Pan movement: 0 to 330°;
Tilt movement: 0 to 80°
Video Standard — SCA201, EME1FC-NTSC: NTSC;
SCE201, EME1PC-PAL: PAL
CE Approval — Yes
Interface — Standard BNC or RCA (for best results,
use BNC connectors and RG-6 coaxial cable)
Connectors — All models: Video: (1) BNC M Composite
video, (1) Power input;
SCA201, SCE201: Also have (1) pan/tilt terminal block
Power — All models: 9-VDC external power supply;
EME1FC-NTSC, EME1FC-PAL: IEC adapter and
EU, U.K., U.S., or Australia power cord
Size — SCA201, SCE201: 4.2"H x 4.5"W (10.7 x 11.5 cm);
EME1FC-NTSC, EME1FC-PAL: 2.6"H x 3.5" dia. (6.5 x 8.8 cm)
Weight — 1.1 lb. (0.5 kg)
Item
Code
AlertWerks PT Dome Cameras
North American
SCA201
European PAL
SCE201
AlertWerks Universal-Mount Cameras
North American
EME1FC-NTSC
European PAL
EME1FC-PAL
FREE, live help in 30 seconds or less!
|9
Remote Monitoring & Security
AlertWerks ServSensor Hubs
Safeguard your infrastructure and resources.
EME108A-R2: Top: front view;
bottom: rear view
• Function as a central hub for your AlertWerks Intelligent
Sensors.
• Use them for remote monitoring of a wide range of areas
from server rooms to factory floors.
• Feature four or eight RJ-45 ports; AlertWerks Intelligent
Sensors sold separately.
• Work with a wide range of sensors: temperature, humidity,
water, airflow, smoke, motion, security, dry contact, and
AC and DC voltages.
• Use sensors in any combination.
• Easy to set up, easy to use.
• Integrate hubs into your SNMP-managed network
or use as an independent monitoring system.
• Java™ based Web user interface enables you to access
the hub over any IP network — even the Internet.
• Instantly sound the alarm when a sensor exceeds
predetermined limits.
• Send alerts through SNMP or e-mail.
• Keeps a time-stamped log of all events, which can
be reviewed and graphed.
• PoE models are powered through the Ethernet cable.
FF WARRANTY — 1 Year
The brains of your environmental monitoring system
Easy installation
The AlertWerks ServSensor is the central hub of the AlertWerks
environmental monitoring system. Connect it to your network, attach
sensors (pages 14–16), and you’re ready to remotely view the status of
your data centers and other facilities. The ServSensor features four or eight
autosensing RJ-45 ports for connecting any of the AlertWerks Intelligent
Sensors on pages 14–16. See the chart on pages 6–7 for compatibility.
Check for temperature, humidity, and liquids. Know when server cabinet
doors are open or closed and whether the cabinet is overheating. Use it
for remote monitoring and management of a wide range of devices such
as HVAC systems, security equipment, UPSs, generators, and industrial
equipment.
The ServSensor is also available as kits, one with an AlertWerks
Temperature Sensor (EME109A-R2) and two that include a AlertWerks
Temperature Humidity Sensor (EME110A-R2, EME106A).
The ServSensor installs in minutes. Simply assign an IP address
and connect to the embedded Web server. Plug in any of our AlertWerks
Intelligent Sensors, and the ServSensor’s autosensing feature will recognize
the type and automatically configure the sensor. Its embedded Web server
enables you to use a standard Web browser to view sensor status over any IP
network — even the Internet. Check out the status of your data center from
your desk or even while you’re on the road.
Sounds the alarm when things go wrong
In addition to enabling you to passively monitor sensors, the AlertWerks
ServSensor actively alerts you when sensors exceed limits you determine.
It can send alerts via SNMP or by e-mail.
PoE version, too
Easy management
The ServSensor is fully SNMP manageable, so you can integrate it easily
into any SNMP-managed network and monitor it through standard SNMP
software such as HP® OpenView®.
The built-in database maintains a time-stamped log of all events, so you
can go back to see what happened and when it happened. The integrated
data collection and graphing package is especially useful in spotting trends
in security, detection of AC power line voltage, measurement of DC voltage,
and control relays, and for providing historical information for analysis.
For help planning your complete AlertWerks environmental monitoring
system, call our FREE Tech Support. Our experts can help you decide how
many hubs and sensors you need to meet your monitoring needs.
Both the 4- and the 8-port ServSensor models are also available with
802.3af PoE, so they can be powered over the Ethernet cable via a PoE injector. This enables you to place them in areas that don’t have power outlets.
10 |
888-433-5049 | blackbox.com/go/AlertWerks
Remote Monitoring & Security
AlertWerks Sensor Expansion Hub
(EME1X8) in Comm Closet, p. 9
Up to 100 feet (30 m)
Smoke
Detector
Dome
Camera
(SCA201)
Dome
Camera
(SCA201)
Remote Location A
AlertWerks
ServSensor,
8-Port,
(EME108A-R2)
in ClimateCab™,
blackbox.com
Security
Smoke Detector
Temp./Humidity
Workstations
Temperature
AC Voltage
Temperature/
Humidity
Water
AlertWerks™
ServSensor
V4E Hub
(EME134A-R2),
pp. 8–9
Water
AC Voltage
Security
Dry Contact to UPS
Security
Smoke
Detector
Switch
Temperature
Internet
Firewall
Security
AC Voltage
Remote Location B
Router
AlertWerks ServSensor
Junior, 2-Port,
(EME102A-R2), p. 12
Temperature/
Humidity
Water
AlertWerks ServSensor
Junior, 2-Port,
(EME102A-R2, p. 12)
Security
Temperature
Security
Temperature/Humidity
Smoke Detector
Smoke Detector
Digital 8
tech specs
Configuration — Software utility for IP
setup, then over Web browser
Environmental —
Temperature: EME108A-R2–
EME110A-R2, EME158A: 32 to
104º F (0 to 40º C);
EME105A–EME106A, EME155A:
-31 to +176º F (-35 to +80º);
Humidity: EME108A-R2–
EME110A-R2, EME158A:
30 to 70% noncondensing;
EME105A–EME106A, EME155A:
20 to 80% noncondensing
Monitoring and Alarms — Via Web
browser, e-mail, SNMP trap
Security— User/administrator passwordprotected login
CE Approval — Yes
RoHS — EME158A, EME105A, EME155A,
EME106A
Connectors —
EME108A-R2–EME110A-R2, EME158A:
(8) RJ-45 sensor ports,
(1) 10BASE-T Ethernet port;
EME105A–EME106A, EME155A:
(4) RJ-45 sensor ports,
Remote
Workstation
UPSs
(1) 10BASE-T Ethernet port
Indicators — LEDs: EME108A-R2–
EME110A-R2, EME158A: (1) Power On,
(1) Link,(1) Activity, (8) Status,
(8) Online;
EME105A–EME106A, EME155A:
(1) Power On,
(1) Link, (1) Activity, (4) Status,
(4) Online
Power — EME108A-R2–EME110A-R2: 90–260 VAC,
47–63 Hz autosensing
external power supply;
EME105A–EME106A:
100–240 VAC, 50–60 Hz
autosensing external power supply;
EME155A, EME158A: 100–240 VAC,
50–60 Hz autosensing external
power supply or via 802.3af PoE
Size —
EME108A-R2–EME110A-R2, EME158A:
1.8"H x 9.2"W x 5.4"D
(4.6 x 23.4 x 13.8 cm);
EME105A–EME106A, EME155A:
1.8"H x 8.5"W x 5.4"D
(4.6 x 21.6 x 13.7 cm)
Item
AlertWerks ServSensor Hubs
ServSensor
8-Port, No Sensor
8-Port with PoE, No Sensor
8-Port, (1) Temperature Sensor (Kit)
8-Port, (1) Dual Temperature and Humidity Sensor (Kit)
ServSensor 4
4-Port, No Sensor
4-Port with PoE, No Sensor
4-Port, (1) Dual Temperature and Humidity Sensor (Kit)
Code
EME108A-R2
EME158A
EME109A-R2
EME110A-R2
EME105A
EME155A
EME106A
AlertWerks Intelligent Sensors, see pp. 14–16.
FREE, live help in 30 seconds or less!
| 11
Remote Monitoring & Security
AlertWerks ServSensor Junior
An economical way to safeguard infrastructure
and resources in smaller installations.
• Functions as a central hub for up to two AlertWerks
Intelligent Sensors (pages 14–16).
• Ideal for limited areas, such as wiring closets.
• Java™ based Web user interface enables you to access
the hub over any IP network — even the Internet.
• PoE model features 802.3af Power over Ethernet, so you
can easily place the hub away from power outlets.
• Send alerts through SNMP or e-mail.
FF WARRANTY — 1 Year
EME102A-R2: front view
EME102A-R2: rear view
Smart monitoring for small spaces
For small installations, choose the ServSensor Junior. With only two
sensor ports, it’s an economical way to watch over limited areas like
wiring closets.
The AlertWerks ServSensor Junior is an affordable way to monitor
smaller installations. It acts as the central hub of the AlertWerks
environmental monitoring system in limited areas. Connect it to your
network, attach AlertWerks sensors, and you’re ready to remotely view
the status — temperature, humidity, door opening and other characteristics—
of every corner of your facilities. The ServSensor Junior is espcially useful for
remote monitoring in remote sites such as wiring closets.
The ServSensor Junior features two autosensing RJ-45 ports for connecting any of the AlertWerks Intelligent Sensors. Also available are ServSensor
Junior Kits, one with an AlertWerks Temperature Sensor (EME103A-R2) and
one with an AlertWerks Dual Temperature Humidity Sensor (EME104A-R2).
A clever hub
The ServSensor Junior is smart. Its embedded Web server enables you
to use a standard Web browser to view sensor status over any IP network—
even the Internet. Check out the status of your data center from your office,
from home, or from the road.
It’s fully SNMP manageable, so you can integrate it easily into any
SNMP-managed network and monitor it through standard SNMP software
such as HP® OpenView®.
The built-in database maintains a time-stamped log of all events, so you
can go back to see what happened and when it happened. The integrated
data collection and graphing package is especially useful in spotting trends
in security, detection of AC power line voltage, measurement of DC voltage,
and control relays, and for providing historical information for analysis.
Active alarming
In addition to enabling you to passively monitor sensors, the AlertWerks
ServSensor Junior actively alerts you when sensors exceed limits you
determine. It can send alerts via SNMP or by e-mail.
Nice and easy
The ServSensor Junior installs in minutes. Simply assign an IP address
and connect to the embedded Web server. Plug in one or two of our
Intelligent Sensors and the ServSensor’s autosensing feature will recognize
the type and automatically configure it.
PoE frees you from power outlets
The PoE model features 802.11af Power over Ethernet, which enables
you to place the unit without worry about having a nearby power outlet.
12 |
Use Dry Contacts for ServSensor Junior to add user-definable dry-contact
sensors. Dry Contacts support up to 5 dry-contact inputs per RJ-45 port
for a total of up to 10 dry-contact inputs on the sensor.
Each open/closed contact switch indicates Alarm or Normal with an input
voltage range of 0 to 5 VDC that can be set through software. Normally
open; normally closed can also be set through software.
tech specs
Configuration — Software utility for IP
setup, then over Web browser
Environmental —
Temperature:
32 to 104º F (0 to 40º C);
Humidity:
30 to 70% noncondensing;
Monitoring and Alarms — Via Web
browser, e-mail, SNMP trap
Protocols Supported (Client) —
Security— User/administrator passwordprotected login
Connectors —
(2) RJ-45 sensor ports;
(1) 10BASE-T Ethernet port;
Power — EME102A-R2–
EME104A-R2: 90–260 VAC,
47–63 Hz autosensing
external power supply;
EME152A–EME154A: 100–240 VAC,
50–60 Hz autosensing external
power supply or via 802.3af PoE
CE Approval — Yes except EME1DC-UPG
RoHS — EME102A-R2–EME104A-R2,
EME152A–EME154A
Size —
1.3"H x 4.5"W x 2.5"D
(3.2 x 11.4 x 6.4 cm)
Item
Code
AlertWerks ServSensor Junior
2-Port, No Sensor
EME102A-R2
2-Port, (1) Temperature Sensor (Kit)
EME103A-R2
2-Port, (1) Dual Temperature and Humidity Sensor (Kit)
EME104A-R2
AlertWerks ServSensor Junior with PoE
2-Port, No Sensor
EME152A
2-Port, (1) Temperature Sensor (Kit)
EME153A
2-Port, (1) Dual Temperature and Humidity Sensor (Kit)
EME154A
Dry Contacts for ServSensor Junior, 5 Inputs
15 ft. (4.5-m)
EME1DC-015
60 ft. (18.2-m)
EME1DC-060
100 ft. (30.4-m)
EME1DC-100
Activation Key for ServSensor Junior Dry Contacts (Required for Dry-Contact Use)
EME1DC-UPG
888-433-5049 | blackbox.com/go/AlertWerks
Remote Monitoring & Security
AlertWerks ServSensor Contact
Safeguard equipment and devices that use
dry contact outputs to send alarm signals.
• Functions as a central hub for your AlertWerks Intelligent
Sensors.
• Features 8 autosensing RJ-45 ports for connecting AlertWerks
Intelligent Sensors plus 20 or 60 dry contacts to support thirdparty sensors.
• Adaptable to a wide range of devices, such as UPSs, other
remote monitoring systems, and building management
systems.
• Supports customized sensors for conditions like motion,
gas, and sound.
FF WARRANTY — 1 Year
Like the rest of the ServSensor family, the AlertWerks ServSensor Contact
acts as a central hub of the AlertWerks environmental monitoring system.
But the ServSensor Contact also features dry contact inputs for third-party
equipment and devices that use dry contact outputs to send alarm signals.
The ServSensor Contact is adaptable to a wide range of devices such as
UPSs, other remote monitoring systems, and building management systems.
The hub comes with eight autosensing RJ-45 ports for connecting
any of the Intelligent Sensors on pages 12–13 plus 20 or 60 additional
2-wire, dry-contact ports. These specially designed ports enable you to
make your own dry-contact cables quickly and easily.
The ServSensor Contact is rackmountable on standard 19" rails
and includes rackmount ears.
All the ServSensor management features you expect
Like the rest of our ServSensor family, the ServSensor Contact is smart.
You can use its embedded Web server to access it remotely, plus it’s SNMP
manageable, so it integrates easily into your managed network.
ServSensor Contact maintains a time-stamped log of all events and
enables you to graph data to give you a visual overview of what’s going
on in your systems.
In addition to enabling you to passively monitor sensors, the AlertWerks
ServSensor Contact actively alerts you when sensors exceed limits you
determine. It can send alerts via SNMP or by e-mail.
Easy installation
The ServSensor Contact installs in minutes. Simply assign an IP address
and connect to the embedded Web server. Plug in any of our Intelligent
Sensors or dry-contact sensors and the ServSensor’s autosensing feature
will recognize the type and automatically configure it.
For help planning your complete AlertWerks environmental monitoring
system, call our FREE Tech Support. Our experts can help you decide how
many hubs and sensors you need to meet your monitoring needs.
EME111A-20-R2: top: front view;
bottom: rear view
e
Black Box Explains
Dry contacts.
A dry contact, also called a volt-free contact, is a relay contact
that does not supply voltage. The relay energizes or de-energizes
when a change to its input has occurred. In other words, a dry
contact simply detects whether or not an input switch is open
or closed.
The dry contacts in the ServSensor Contact provide a simple
two-wire interface that can be easily adapted to third-party sensors
and devices. Because you define what the open or closed condition
means, dry contacts are infinitely adaptable.
Use dry contacts to monitor alarms such as fire alarms, burglar
alarms, and alarms on power systems such as UPSs. A very common
use for dry contacts is to detect whether a cabinet door is open
or closed.
tech specs
Configuration — Software utility for IP
setup, then over Web browser
Environmental —
Temperature:
32 to 131º F (0 to 55º C)
Humidity:
20 to 80%, noncondensing
Monitoring and Alarms — Via Web
browser, e-mail, SNMP trap
Protocols Supported (Client) — DHCP,
DNS, SMTP, (S) NTP, SNMPv1
Security— User/administrator passwordprotected login
Connectors —
EME111A-20-R2, EME112A-20-R2,
EME113A-20-R2:
(8) RJ-45 sensor ports;
(20) dry contacts;
(1) RJ-45 10BASE-T Ethernet port;
EME111A-60-R2–EME113A-60:
(8) RJ-45 sensor ports;
(60) dry contacts;
(1) RJ-45 10BASE-T Ethernet port
Power — 100–240 VAC, 47–63 Hz
autosensing external power supply
Size — 1.7"H x 18"W x 5"D
(4.2 x 45.7 x 12.7 cm)
Item
AlertWerks ServSensor Contact
8-Port, 20 Dry Contacts with
No Sensors
Temperature Sensor
Temperature/Humidity Sensor
8-Port, 60 Dry Contacts with
No Sensors
Temperature Sensor
Temperature/Humidity Sensor
Code
EME111A-20-R2
EME112A-20-R2
EME113A-20-R2
EME111A-60
EME112A-60
EME113A-60
AlertWerks Intelligent Sensors, turn the page.
FREE, live help in 30 seconds or less!
| 13
Remote Monitoring & Security
AlertWerks Intelligent Sensors
Choose from a wide range of sensors to
EME1T2-005
EME1TH2-005
CE Approval — Yes
Temperature Sensors
• Never need calibration.
• Measurement range of -67 to +167º F
(-55 to +75° C) with 1° F resolution.
• Measurement accuracy of ±0.9° F from
+14 to +167° F (-10 to +75º C).
• Connect up to four daisychainable sensors
with CAT5 cable for a total distance of up
to 1000 feet (304.8 m).
• FF WARRANTY — 1 Year
Item
AlertWerks Temperature Sensors
Standard
1-ft. (0.3-m) Cable
Remote
5-ft. (1.5-m) Cable
Waterproof
15-ft. (4.5-m) Cable
Daisychainable
4-Pack
8-Pack
Code
EME1T1-001
EME1T2-005
EME1T3-015
EMEDTEMP
EMEDTEMP4
EMEDTEMP8
CE Approval — Yes
EME1TH3-015
EME1TCPK
Dual Temperature/Humidity Sensors
• Measure temperature from -40 to 167° F
(-40 to +75º C) in 1° F increments.
• Accurate to ±0.9° F.
• Measure 0 to 100% relative humidity with
1% resolution and accuracy of ±3% at 77° F.
• Sensor element is water resistant.
• FF WARRANTY — 1 Year
Item
Code
AlertWerks Dual Temperature/Humidity Sensors
Standard
1-ft. (0.3-m) Cable
EME1TH1-001
Remote
5-ft. (1.5-m) Cable
EME1TH2-005
Waterproof
15-ft. (4.5-m) Cable
EME1TH3-015
EME1Y1-015
CE Approval — Yes
Security Sensors/Contacts
EMERW-020
EME1W1-015
CE Approval — Yes
Water Sensors
• Tell you when doors to secure areas
have been opened.
• FF WARRANTY — 1 Year
14 |
CE Approval — Yes
Thermocouples
• One measurement reading every second.
• For use in extreme industrial environments.
• J-Type model measures temperature ranges
of +32 to +1382° F (0 to +750° C).
• K-Type model measures temperature ranges of
-328 to +1472° F (-200 to +800° C).
• Use Thermocouple Adapters to attach a
thermocouple to the AlertWerks ServSensor
V4E (EME134A-R2), pages 8–9.
• FF WARRANTY — 1 Year
Item
Code
AlertWerks Thermocouples
J-Type
EME1TCPJ
K-Type
EME1TCPK
AlertWerks Thermocouple Adapters
with 5
-ft. (1.5-m) cable
J-Type
EME1TCAJ-005
K-Type
EME1TCAK-005
AlertWerks Thermocouple and Thermocouple
Adapter
J-Type
EME1TCBJ-005
K-Type
EME1TCBK-005
Item
Code
AlertWerks Security Sensors/Contacts
15-ft. (4.5-m) Cable
EME1Y1-015
60-ft.(18.2-m) Cable
EME1Y1-060
100-ft. (30.4-m) Cable
EME1Y1-100
• Accurate enough to measure distilled water.
• Use Rope Water Sensors on the floor to
detect the presence of water or liquid.
• Intelligent Rope Water Sensors report where
the water is along the length of the sensor.
• FF WARRANTY — 1 Year
Item
Code
AlertWerks Spot Water Sensors
15-ft. (4.5-m)Cable
EME1W1-015
60-ft.(18.2-m)Cable
EME1W1-060
100-ft.(30.4-m)Cable
EME1W1-100
AlertWerks Rope Water Sensor
20-ft. (6.0-m)Cable
EMERW-020
10-ft. (3.0-m)Extension
EMERWE-010
AlertWerks Intelligent Rope Water Sensors
20-ft. (6.0-m)Cable
EMELW-020
10-ft. (3.0-m)Extension
EMELW-010
EME1TCAK-005
EME1K1-015
CE Approval — Yes
EME1F1-005-R2
Airflow Sensor
CE Approval — Yes
• Thermistor sensor.
• On/off alarm signal for airflow.
• Two LEDs indicate the status.
• FF WARRANTY — 1 Year
Item
AlertWerks Airflow Sensor
5-ft. (1.5-m) Cable
Code
EME1F1-005-R2
NOTE: For other sensor lengths, call Tech Support.
Dry-Contact Sensors
• Open/closed contact switch indicates Alarm
or Normal.
• The input voltage range of 0 to 5 VDC can
be set through software.
• Normally open; normally closed can be set
through software.
• Current range: can sink up to 20 mA.
• FF WARRANTY — 1 Year
Item
AlertWerks Dry-Contact Sensors
15-ft. (4.5-m) Cable
60-ft.(18.2-m) Cable
100-ft.(30.4-m) Cable
888-433-5049 | blackbox.com/go/AlertWerks
Code
EME1K1-015
EME1K1-060
EME1K1-100
Remote Monitoring & Security
work with AlertWerks ServSensor hubs.
EME1S2-005
EME1A1-005
EME1D1-005-R2
CE Approval — Yes
CE Approval — Yes
Voltage Sensors
• AC Voltage Sensor detects voltage from 50
to 250 VAC and indicates Alarm or Normal.
• DC Voltage Sensor is user programmable
with both the base and top voltage from
0 to 60 volts.
• FF WARRANTY — 1 Year
Item
Code
AlertWerks Voltage Sensors with 5-ft. (1.5-m) Cable
AC
EME1A1-005
DC
EME1D1-005-R2
EME1PM
Photoelectric Smoke Detector Sensor
CE Approval — Yes
Power Monitors
• Enables you to monitor power consumption
in real time.
• Measure total active power, total reactive power,
active power, reactive power, phase line
voltage, phase line current, and power factor.
• Come in protective plastic enclosures that can
be DIN-rail mounted.
• Three-phase meters can also be used as singlephase meters.
• FF WARRANTY — 1 Year
• More effective than ionization smoke
detectors at sensing smoldering fires.
• Auto resets when smoke clears.
• FF WARRANTY — 1 Year
Item
Code
AlertWerks Photoelectric Smoke Detector Sensor
5-ft. (1.5-m) Cable
EME1S2-005
EME1SS-005
CE Approval — Yes
EME1C1-005
CE Approval — Yes
AlertWerks 4-20 mA Converter
• Add a third-party, industrial sensor to
AlertWerks ServSensor hubs.
• Enables you to communicate with equipment
in industrial settings.
• FF WARRANTY — 1 Year
Item
AlertWerks 4-20 mA Converter
Item
Code
AlertWerks Power Monitors
110-VAC, 3-Phase, 30 Amps, 4-Wire EME1PM
220-VAC, 3-Phase, 100 Amps, 4-Wire
EME2PM-R2
110 VAC, 1-Phase, 100 Amps, 2-Wire EME3PM
220-VAC, 3-Phase, 100 Amps, 4-Wire EME4PM
Siren and Strobe Light
• Siren sounds at 100 ± 3 dB at 100 cm.
• Supports maximum cable runs of up to
1000 feet (304.8 m). For details, contact
our FREE Tech Support.
• Can be triggered by any other sensor
connected to the ServSensor hub.
• FF WARRANTY — 1 Year
Item
Code
AlertWerks Siren and Strobe Light
5-ft. (1.5-m) Cable
Code
EME1C1-005
EME1M1-005-R2
EME1SS-005
EMESDIN
EME1KJ8-005
CE Approval — Yes
EMEDRMK
CE Approval — Yes
CE Approval — Yes
Motion Detection Sensor
Digital I/O Sensors
Rackmount Kits
• Detection speed of 0.5–9.8 feet per second
(0.15–3 m/sec).
• Temperature range of -4 to +144° F
(-20 to +50° C).
• 150° detection angle.
• FF WARRANTY — 1 Year
• Provide eight dry contacts on one sensor port.
• FF WARRANTY — 1 Year
•
Item
Code
AlertWerks Digital I/O Sensors
with 5-ft. (1.5-m) Cable
(8) Dry Contacts
EME1J8-005
(2) RJ-45 to (8) Dry Contacts EME1KJ8-005
Item
Code
AlertWerks Motion Detector Sensor
5-ft. (1.5-m) Cable
EME1M1-005-R2
FF WARRANTY — 1 Year
Item
Code
AlertWerks Rackmount Kits
Rackmount DIN Rail EMEDIN
DIN Rail Mounting Bracket for Sensors EMESMB
Rackmount Bracket for EME134A-R2 and
(1) Expansion Hub
EMEDRMK
Rackmount Bracket for EME134A-R2 with Integral
Half-Width DIN Rail for Mounting Sensors
EMESDIN
FREE, live help in 30 seconds or less!
| 15
Remote Monitoring & Security
AlertWerks Intelligent Sensors
EME1PMS1
EME1P2O-005
CE Approval — Yes
CE Approval — Yes
Power Switches
CE Approval — Yes
• Controls electric power over the Internet or
your local IP network.
• Normally in a closed (off) position or open (on)
position, switched on or off by a control signal
from the sensor hub.
• Metal oxide varistors and snubber circuits
provide protection from electrical disturbance.
• Monitors power and load.
• Disconnect alarm sends a signal back to the
sensor hub if the unit is unplugged.
• Includes a 5-ft. (1.5-m) CAT5 cable, which can
be replaced with up to 100 feet of CAT5 for
longer distances.
• FF WARRANTY — 1 Year
Ultrasonic Fuel Level Sensor
• Monitors liquid levels in a tank.
• Suitable for many kinds of liquids including
water, diesel, gasoline, and waste.
• Works with many different tank sizes and
shapes with programmable tank dimensions.
• Normal, low, and critical alerting.
• Low-profile design with industry standard
SAE-5 stud mounting pattern.
• FF WARRANTY — 1 Year
Item
Code
AlertWerks Ultrasonic Fuel Level Sensor EME1FL-015
Item
Code
AlertWerks Power Switches, 5-ft. (1.5-m) Cable
110V, Normally Closed
EME1P1C-005
110V, Normally Open
EME1P1O-005
220-V, Normally Closed
EME1P2C-005
220-V, Normally Open
EME1P2O-005
48 VDC, Normally Closed
EME1PDCC-005
48 VDC, Normally Open
EME1PDCO-005
Power Monitor Sensors
• Use with a Split-Core Current Transformer
(EME1CT100, EME1CT150, EME1CT200,
EME1CT300) to monitor power conditions.
• Measures power, voltage RMS, current RMS,
and power factor.
• Displays critical data on an integral LCD.
• Supports maximum demand (MD) recording
when used as part of the AlertWerks remote
monitoring system.
• FF WARRANTY — 1 Year
Item
AlertWerks Power Monitor Sensors
Single-Phase, 100V, 60 Hz
Single-Phase, 220–240V, 50 Hz
Three-Phase, 100–500V, 60 Hz
Code
EME1PMS1
EME1PMS2
EME1PMS3
EME120-PS
CE Approval — Yes
Power Adapters
CE Approval — Yes
Rope Fuel Sensor, 3-Meter
• Detects gasoline and other liquid hydrocarbon
fuels, including diesel, jet fuel, and kerosene.
• Does not respond to the presence of water.
• The sensor consists of a 3-meter sensor rope,
a 20-foot leader cable, and a sensor module.
• FF WARRANTY — 1 Year
Item
Code
AlertWerks Rope Fuel Sensor, 3-Meter
EME1RF-003
• Work with all AlertWerks ServSensor hubs.
• Use the EME120-PS as a spare AC power
supply.
• Use the EME100-DC with telecom power
systems.
• FF WARRANTY — 1 Year
Item
Code
AlertWerks Power Adapters
100–240 VAC to 7.5 VDC, 3 Amp, IEC Adapter
EME120-PS
40–60 VDC to 7.5 VDC
EME100-DC
Split-Core Current Transformers
• Can be opened and installed around a power
line without disconnecting the power supply.
• Use with the Power Monitor Sensor
(EMEPMS1–EMEPMS3) for connection to
an AlertWerks ServSensor hub.
• Generous inner opening accommodates larger
cables.
• FF WARRANTY — 1 Year
Item
Code
AlertWerks Split-Core Current Transformers
100/5A
EME1CT100
200/5A
EME1CT200
300/5A
EME1CT300
© Copyright 2013. Black Box Corporation. All rights reserved. Printed in U.S.A. Black Box® and the Double Diamond logo are registered trademarks, and AlertWerks™ and ClimateCab™
are trademarks, of BB Technologies, Inc. Any third-party trademarks appearing in this product data sheet are acknowledged to be the property of their respective owners.
BR00079-AlertWerks_v5
888-433-5049 | blackbox.com/go/AlertWerks