Samsung A850 - SCH Cell Phone User guide

SCH-a850 Series
P O R T A B L E
D u a l - M o d e
T E L E P H O N E
User Guide
Please read this manual before operating your
phone, and keep it for future reference.
ZD14.03_CB_a850_042406_D10
Intellectual Property
All Intellectual Property, as defined below, owned by or
which is otherwise the property of Samsung or its
respective suppliers relating to the SAMSUNG Phone,
including but not limited to, accessories, parts, or
software relating there to (the “Phone System”), is
proprietary to Samsung and protected under federal
laws, state laws, and international treaty provisions.
Intellectual Property includes, but is not limited to,
inventions (patentable or unpatentable), patents, trade
secrets, copyrights, software, computer programs, and
related documentation and other works of authorship.
You may not infringe or otherwise violate the rights
secured by the Intellectual Property. Moreover, you
agree that you will not (and will not attempt to) modify,
prepare derivative works of, reverse engineer,
decompile, disassemble, or otherwise attempt to create
source code from the software. No title to or ownership
in the Intellectual Property is transferred to you. All
applicable rights of the Intellectual Property shall
remain with SAMSUNG and its suppliers.
Samsung Telecommunications America (STA),
Inc.
Headquarters:
Customer Care Center:
1301 E. Lookout Drive 1000 Klein Street
Richardson, TX 75082 Plano, TX 75074
Toll Free Tel: 1.888.987.HELP
(4357)
Internet Address: http://www.samsungusa.com
©2006 Samsung Telecommunications America, Inc. is a
registered trademark of Samsung Electronics America,
Inc. and its related entities.
CDMA Technology is licensed by Qualcomm Incorporated under
one or more of the following patents: U.S. Patent No. 4,901,307;
5,056,109; 5,099,204; 5,101,501; 5,103,459; 5,107,225; 5,109,390.
GH68-08581A
T9 Text Input is licensed by Tegic Communications and is
covered by U.S. Pat. 5,818,437; U.S. Pat. 5,953,541; U.S.
Pat. 6,011,554 and other patents pending.
Openwave® is a registered Trademark of Openwave, Inc.
RSA® is a registered Trademark RSA Security, Inc.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS
WARRANTY CONTAINED ON THE WARRANTY
PAGE ENCLOSED WITH THE PRODUCT, THE
PURCHASER TAKES THE PRODUCT “AS IS”, AND
SAMSUNG MAKES NO EXPRESS OR IMPLIED
WARRANTY OF ANY KIND WHATSOEVER WITH
RESPECT TO THE PRODUCT, INCLUDING BUT NOT
LIMITED TO THE MERCHANTABILITY OF THE
PRODUCT OR ITS FITNESS FOR ANY PARTICULAR
PURPOSE OR USE; THE DESIGN, CONDITION OR
QUALITY OF THE PRODUCT; THE PERFORMANCE
OF THE PRODUCT; THE WORKMANSHIP OF THE
PRODUCT OR THE COMPONENTS CONTAINED
THEREIN; OR COMPLIANCE OF THE PRODUCT
WITH THE REQUIREMENTS OF ANY LAW, RULE,
SPECIFICATION OR CONTRACT PERTAINING
THERETO. NOTHING CONTAINED IN THE
INSTRUCTION MANUAL SHALL BE CONSTRUED
TO CREATE AN EXPRESS OR IMPLIED WARRANTY
OF ANY KIND WHATSOEVER WITH RESPECT TO
THE PRODUCT. IN ADDITION, SAMSUNG SHALL
NOT BE LIABLE FOR ANY DAMAGES OF ANY
KIND RESULTING FROM THE PURCHASE OR USE
OF THE PRODUCT OR ARISING FROM THE
BREACH OF THE EXPRESS WARRANTY,
INCLUDING INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES, OR LOSS OF
ANTICIPATED PROFITS OR BENEFITS.
Table of Contents
Table of Contents
Section 1: Getting Started ................................. 9
Understanding this User Manual .....................................10
Charging the Battery ......................................................11
Activating Your Phone ....................................................12
Setting Up Your Voice Mail .............................................15
Section 2: Understanding Your Phone ............ 17
Features of Your Phone ..................................................18
Closed View of Your Phone .............................................19
Open View of Your Phone ...............................................21
Command Keys ..............................................................23
Understanding the Display Screen ..................................26
Your Phone’s Modes ......................................................30
Section 3: Call Functions ................................. 35
Making a Call .................................................................36
Answering a Call ............................................................41
Calls ..............................................................................46
Section 4: Menu Navigation ............................ 51
Menu Navigation ............................................................52
Menu Shortcuts ..............................................................52
Navigation Key Shortcuts ...............................................53
Navigate Using a Shortcut ..............................................53
Menu Outline .................................................................54
Section 5: Entering Text .................................. 63
Changing the Text Entry Mode ........................................64
Using T9® Mode ............................................................65
Entering Upper and Lower Case .....................................66
Entering Symbols ...........................................................67
Entering Numbers ..........................................................68
Table of Contents
5
Section 6: Understanding Your Contacts ........ 71
Table of Contents
Contacts .........................................................................72
Adding a New Contacts Entry ..........................................73
Finding a Contacts Entry .................................................75
Renaming a Contacts Group ...........................................79
Editing an Existing Contacts Entry ...................................79
Saving a Number After a Call ..........................................86
Deleting a Contacts Entry ...............................................88
Finding My Phone Number .............................................88
Memory ..........................................................................89
Section 7: @metro ........................................... 91
Accessing @metro .........................................................92
Section 8: Messaging ...................................... 97
Types of Messages .........................................................98
Create and Send Text Messages .....................................98
Receive Text Messages ................................................100
Send Picture Messages in Camera Mode ......................101
Send Picture Messages in Standby Mode .....................104
Handwritten Picture Messages .....................................107
Message Folders ..........................................................108
Message Settings .........................................................113
Erase Messages ...........................................................117
Section 9: Mobile Web ................................... 119
Mobile Web ..................................................................120
Launching Mobile Web .................................................120
Using Mobile Web .........................................................121
Using Links ..................................................................121
How Mobile Web Keys Work .........................................122
Section 10: Gallery ......................................... 123
Accessing Your Gallery .................................................124
Using Image Gallery ......................................................124
6
Table of Contents
Using Melody Gallery ....................................................126
Using Animelody Gallery ...............................................127
Section 11: Camera ....................................... 129
Taking Pictures ............................................................130
Saving Pictures ............................................................140
The Picture Gallery .......................................................140
Camera Settings ..........................................................142
Point, Click, and Send a Picture ....................................147
Section 12: Tools ........................................... 149
Voice Recognition .........................................................150
Today ...........................................................................160
Scheduler ....................................................................162
Jump To Date ..............................................................163
To Do List ....................................................................163
Memo Pad ...................................................................165
Count Down .................................................................167
Alarm Clock .................................................................169
World Time ..................................................................171
Calculator ....................................................................172
Section 13: Setup .......................................... 175
Location Setting ...........................................................176
Display Settings ...........................................................176
Sounds Settings ...........................................................183
Network Settings ..........................................................187
Security Settings ..........................................................188
Call Options ..................................................................195
Shortcut Setting ...........................................................199
Language Setting .........................................................200
Clock Set .....................................................................200
Version Information ......................................................201
Section 14: Health and Safety Information ... 203
Health and Safety Information ......................................204
Table of Contents
7
Table of Contents
UL Certified Travel Adapter ...........................................206
Consumer Information on Wireless Phones ...................207
Road Safety ..................................................................216
Operating Environment .................................................219
Using Your Phone Near Other Electronic Devices ..........219
Potentially Explosive Environments ...............................222
Emergency Calls ...........................................................223
FCC Notice and Cautions ..............................................224
Other Important Safety Information ...............................225
Product Performance ....................................................225
Availability of Various Features/Ring Tones ...................227
Battery Standby and Talk Time .....................................227
Battery Precautions ......................................................228
Care and Maintenance ..................................................230
Section 15: Warranty Information ................. 233
Standard Limited Warranty ...........................................234
Index ............................................................... 241
8
Section 1: Getting Started
Topics Covered
• Understanding this User Manual
• Charging the Battery
• Activating Your Phone
• Setting Up Your Voicemail
Section 1
This section explains how to start using your phone
by activating your service, setting up your voice
mail, or getting an understanding of how this
manual is put together.
Section 1: Getting Started
9
Understanding this User Manual
The chapters of this guide generally follow the same
order as the menus and sub-menus in your phone. A
robust index for quick reference to most features begins
on page 241.
Section 1
Also included is important safety information that you
should know before using your phone. Most of this
information is near the back of the guide, beginning on
page 203.
Notes and tips
Throughout this guide there is text that is set apart from
the rest. These are intended to point out important
information, quick methods for activating features, to
define terms, and more. The definitions for these
methods are as follows:
• Notes: Explain alternative options within the current feature,
menu, or sub menu.
• Tips: Provide quick or innovative methods for performing
functions related to the subject at hand.
• Important: Points out important information about the current
feature that could affect performance, or even damage your
phone.
10
Charging the Battery
Charging the Battery
Your phone is powered by a rechargeable standard LiIon battery. Only use Samsung-approved charging
devices and batteries. Samsung accessories are
designed to maximize battery life. Use of other
accessories may invalidate your warranty and may
cause damage.
Use the Travel Adapter
Section 1
The travel adapter included with
your phone is a convenient,
light-weight charger that rapidly
charges your phone from any
120/220 VAC outlet.
1. Plug the large end of the Travel Adapter into a standard
120 VAC or 220 VAC wall outlet.
Important: For connection to an electrical supply not located in the U.S.,
you must use an adaptor of the proper configuration for the power outlet.
Use of the wrong adapter could damage your phone and void your
warranty.
2. Insert the smaller end of the
Travel Adapter into the
charger/accessory connector
at the bottom end of your
phone.
Important: You must unplug the adapter before removing the battery from
the phone during charging to avoid damage.
Section 1: Getting Started
11
Low battery indicator
The battery indicator (
) in the upper-right corner of
the display indicates power level. Monitor the battery
strength and ensure your battery is adequately charged.
• Four bars (
) indicate a full charge.
• An empty battery icon (
) indicates a near empty battery.
• A blinking empty battery icon (
) and a tone sounding
indicate you have two to three minutes before the battery is too
low to operate the phone.
Section 1
If you continue to use your phone without charging its battery,
the phone will shut down.
Activating Your Phone
Contact your Wireless Carrier and follow their
instructions for obtaining service, if necessary. We
suggest that you read this guide to fully understand the
services your phone supports.
Install the Battery
Note: Your phone comes packaged with a partially charged rechargeable
standard Li-Ion battery and travel adapter.
Important: You must fully charge the battery the first time you use your
phone, otherwise you could damage the battery. You can use your phone
while the battery is charging.
12
Activating Your Phone
1. Insert the bottom
end of the battery
first, matching the
gold contacts on
the inside of the
battery to those on
the phone.
2. Press the top end
of the battery
down into the phone until you hear it snap into place.
1. Press and hold the
END
key to turn off the phone (if on).
2. Slide the battery
release latch (1)
toward the top end
of the phone and
hold.
3. Lift the battery (2)
up and away from the phone, top end first.
Section 1: Getting Started
13
Section 1
Remove the Battery
Turn Your Phone On
1. Open the folder on your phone,as
shown.
2. Press the
END
key.
Note: As with any other radio-transmitting
device, do not touch the antenna while using
your phone as this can affect call quality and can
cause the phone to operate at a higher power
level than is necessary.
Section 1
3. The phone begins searching for a
network signal.
4. Once the phone finds a signal, the
time, date, and day appear in the
bottom of the display.
Press
5. You’re now ready to place and receive calls.
Note: If you are outside of your carrier’s coverage or roaming area, the No
Service icon ( ) appears at the top of the phone’s display. If you cannot
place or receive calls, try later when service is available, or at another
location.
Turn Your Phone Off
䡲
END
Press and hold the
key for two or more seconds.
Your phone powers off.
Note: If your phone is on and you press
for less than one second, the
phone will not power off. This prevents your phone from being turned off
accidentally.
END
14
Setting Up Your Voice Mail
Setting Up Your Voice Mail
Voice mail allows callers to leave voice messages, which
can be retrieved any time.
Note: Once your voice mail account has been set up, you can use the
Voice Mail folder (under the Message menu) to view details of voice
messages in your voice mail box.
1. In idle mode, press and hold the 1 key or dial your
own mobile number to dial voice mail.
@
))
Listen to voice mail
1. In idle mode, press and hold the 1 key or dial your
own mobile number to dial voice mail. After connecting,
you will hear your voice greeting.
@
))
2. You are prompted to enter your password.
Section 1: Getting Started
15
Section 1
2. Follow the prompts in the new user tutorial to setup your
mail box.
16
Section 1
Section 2: Understanding Your Phone
Topics Covered
• Features of Your Phone
• Closed View of Your Phone
• Open View of Your Phone
• Command Keys
• Understanding the Display Screen
• Your Phone’s Modes
Section 2: Understanding Your Phone
Section 2
This section outlines some key features of your
phone. It also describes the screen format and the
icons that will be displayed when the phone is in
use.
17
Features of Your Phone
• Domestic and international voice and text messaging service
(available on participating networks).
Section 2
• High speed data (CDMA 2000 1x Technology)
• Global Positioning (GPS) Technology
• PIM Functions
• MMS Messaging
• Txt Messaging
• Handwritten Messaging
• E-mail Messaging
• Built-in Digital Camera
• Voice Dial
• Speakerphone
18
Closed View of Your Phone
Closed View of Your Phone
5. Antenna
1. Headset Jack
2. Camera Lens
6. Activity LED
3. Volume Keys
7. Camera Key
4. Front LCD
8. Speaker Mode Key
9. Power/Accessory Connector
Features
2. Camera Lens — The lens of your built-in camera.
3. Volume Key — Lets you adjust the master volume in
standby mode (with the folder open) or adjust the voice
volume during a call. To mute the ringer during an
incoming call, press the volume key up or down.
4. Front LCD — Displays time, date, and phone status
icons.
5. Antenna — Exchanges voice and data signals with the
network.
Section 2: Understanding Your Phone
19
Section 2
1. Headset Jack — Lets you plug in an optional headset
for safe, convenient, hands-free conversations.
6. Activity LED — Serves the following functions:
䢇
䢇
䢇
䢇
䢇
Flashes red to indicate an incoming call or message
Flashes green briefly when your phone is in service.
Lights red when you power the phone on.
Lights red continuously when travel adapter is connected.
Lights green continuously when travel adapter is connected
and phone is fully charged.
7. Camera Key — Launches the Camera feature of your
phone.
8. Speaker Mode Key — Enables and disables speaker
phone mode.
Section 2
9. Power/Accessory Connector — Used to plug in the
charging accessories and also connect any available
accessory cables to your phone.
20
Open View of Your Phone
Open View of Your Phone
1. Receiver
2. Main LCD
3. Navigation Key
18. OK Key
4. Left Soft Key
@
5. Volume Keys
6. Send Key
7. Clear Key
17. Right Soft Key
16. Camera Key
Section 2
15. End Key
14. Speakerphone Key
8. Camera Key
13. Alpha-numeric Keys
12. Voice Recognition Key
9. Special Function Keys
11. Microphone
10. Power Accessory Connector
Features
1. Receiver — Lets you hear the other caller.
Section 2: Understanding Your Phone
21
2. Main LCD — Indicates the status of your phone,
including numbers dialed, feature and function screens,
status icons, message indicators, signal strength, and so
on.
3. Navigation Keys — In Menu mode, let you scroll
through the phone menu options. In Idle mode, let you
access preset functions and one user-defined function.
4. Left Soft Key — Used to navigate through menus and
applications and to select the choice indicated at the
bottom left corner of the Main LCD.
5. Volume Keys — In Idle mode, lets you adjust the ringer
volume or lets you select a vibrate mode. During a call,
lets you adjust the Receiver volume.
6. Send Key — Lets you place or receive a call. In standby
mode, press the key once to access the recent call log.
Section 2
7. Clear Key — Deletes characters from the display when
you are in text entry mode. Press this key to return to the
previous menu or screen when navigating features on
your phone.
8. Camera Key — Lets you launch the camera and take
pictures.
9. Special Function Keys — Enter special characters.
Performs various functions.
10. Power/Accessory Connector — Used to plug in the
charging accessories and also connect any available
accessory cables to your phone.
11. Microphone — Lets the other caller hear you clearly
when you are speaking to them.
12. Voice Recognition Key — Launches VoiceSignal
options.
22
Command Keys
13. Alpha-numeric Keys — Use these keys to enter
numbers, letters, and characters.
14. Speakerphone Key — Enables and disables
speakerphone mode.
15. End Key — Ends a call. If you press and hold the END
key, the power goes On or Off. When you receive an
incoming call, press to mute the ringer and send the call
to voicemail.
16. Camera Key — Lets you launch the camera and take
pictures.
17. Right Soft Key — Used to navigate through menus and
applications and to select the choice indicated at the
bottom right corner of the Main LCD.
18. OK Key — Pressing when navigating through a menu
accepts the highlighted choice in a menu.
Command Keys
Left Soft Key
Some functions of the left soft key are as follows.
• In standby mode, press the MENU (left) soft key (
) to open
the main menu.
• When the left soft key function is Options, press the Options
(left) soft key (
) and a pop-up menu appears.
• When the left soft key function is Edit, press the Edit (left) soft
key (
) to edit a Contact.
Section 2: Understanding Your Phone
23
Section 2
Functions for the soft keys are defined by what appears
above each in the display. There are two soft keys, the
left soft key
and the right soft key
.
Right Soft Key
Some functions of the right soft key are as follows.
• In standby mode, press the CONTACTS (right) soft key (
) to
open the Contacts list.
• When the right soft key function is Back, press the Back (right)
soft key (
) to back up one menu level.
OK Key
• In a menu, press the OK key (
OK
) to accept the highlighted
selection.
• In camera mode, press the OK key (
OK
) to take a photo or to
create a Pic. message.
• When the OK key function is Edit, press the Edit (OK) key (
OK
)
to edit a Draft message.
Clear Key
The CLR key (
) is used to erase or clear numbers,
text, or symbols from the display. You can also use the
key to return to a previous menu or to return to
standby mode from any menu.
Section 2
CLR
CLR
1. If you enter an incorrect character, briefly press
backspace (and delete) the character.
2. To erase the entire sentence, press and hold
CLR
3. To back up one menu level, briefly press
.
4. To return to standby mode, press and hold
you return to standby mode.
CLR
CLR
CLR
to
.
until
End Key
1. Press and hold the End key
24
END
to turn on your phone.
Command Keys
2. Briefly press
END
once to disconnect a call.
3. Press
to return to standby mode from any menu, or
to cancel the last input.
END
Send Key
The Send key SEND is used to answer calls, dial calls, and
to recall the last number(s) dialed, received, or missed.
1. Press
SEND
once to answer calls.
2. Enter a number and briefly press
SEND
to make a call.
3. Briefly press SEND in standby mode to display a list of
recent calls to and from your phone.
4. Press SEND twice in standby mode to call the most recent
number.
5. Press SEND to pick up a waiting call. Press
switch back to the other call.
SEND
again to
Navigation Key
OK @
Speakerphone Key
Use the speakerphone key ( ) — located on the right
side of your phone — to switch from using the earpiece
to the speakerphone before or during a call. Use the
volume keys — located on the left side of your phone
— to adjust the volume. Press the speakerphone key to
enable and disable the speakerphone option.
Section 2: Understanding Your Phone
25
Section 2
Use the directional keys on the navigation key
to
browse menus, sub menus, and lists. Each key also acts
as a shortcut to launch applications.
Camera Keys
Use either of the camera keys (
) — located on
the keypad and on the right side of your phone — to
activate the camera built into your phone and to take
pictures.
Understanding the Display Screen
The top line of your phone’s
display contains icons that
indicate network status, battery
power, signal strength,
connection type, and more. The
following list contains icons that
may appear in your display.
Display Screen Icons
Section 2
Signal strength — Always appears when your phone is
on and indicates the current signal strength. More lines
indicate higher signal strength.
Service indicator — Indicates a call in progress. When
dialing a number, this icon flashes until the call connects.
No service indicator — Indicates your phone cannot find
a signal because you’re outside a service area. You
cannot make or receive calls. Wait for a signal or move
into an open area to try and find a signal. The no service
indicator always appears when you turn on your phone
and disappears once service is located.
26
Understanding the Display Screen
Roam — Roaming occurs when you use your phone
outside your home area. While roaming, a wireless
provider other than yours handles your call, so the service
rate for the call may be higher than those made within
your home area. Please refer to information from your
Wireless Provider on roaming rates.
New Message — Indicates that you’ve received a new
text, page, or web alert message. You’re also notified by a
visual and audible alert.
Voice Mail — Indicates that you’ve received a new voice
mail.
1X Protocol — Indicates your phone is using the 1X
protocol.
IS95-2G Protocol — Indicates your phone is using the
IS95-2G protocol. This protocol is not capable of high
speed data.
Alarm clock — The alarm clock is set.
GPS (911 only) — Your phone passes Global Positioning
Service (GPS) location data only during 911 calls.
GPS (Location On) — Your phone passes GPS location
data during all calls.
Vibrate — The ringer has been set to Vibrate using the
volume key on the side of the phone. When you receive a
call, the phone vibrates but does not ring.
Section 2: Understanding Your Phone
27
Section 2
Battery strength — Indicates the battery charge level.
The more black bars, the greater the charge. When the
battery becomes very low, a flashing empty battery icon
displays and the phone sounds an audible alert, which
indicates your phone is about to shut down.
Vibrate plus Ring — The ringer has been set to
Vibrate+Ring using the volume key on the side of the
phone. When you receive a call, the phone vibrates and
rings.
Ring — The ringer has been set to Level 1 – 5 or 1 Beep
using the volume key on the side of the phone. When you
receive a call, the phone rings.
Ringer Silent — The ringer has been set to Silent using
the volume key on the side of the phone.
Silent mode — Indicates your phone is in silent mode.
Ringer is silenced for all alerts, incoming calls, and
incoming messages. The phone alerts you of incoming
calls, alerts, and messages by vibration and a flashing
Service LED.
Section 2
Dialogue Boxes
Dialogue boxes prompt for action, inform you of status,
or warn of situations such as low memory. Dialogue
boxes and their definitions are outlined below.
• Choice
䢇
Example: “Save to draft?”
• Reconfirm
䢇
Example: “Erase all inbox msgs?”
• Performing
䢇
Example: “Sending...” “Connecting...”
• Completed
䢇
Example: “Message Saved”
• Information
䢇
28
Example: “New Message”
Understanding the Display Screen
• Error
䢇
Example: “System Error!”
• Warning
䢇
Example: “Battery Low,” “Memory Full!”
Backlights
Backlights illuminate the internal and external displays
and the keypad. When you press any key or open the
phone, the backlights come on. They go off when no
keys are pressed within a period of time set in the
Backlight menu.
Note: During a phone call, the display backlights dim and turn off after five
seconds to conserve battery power, regardless of the Backlight setting.
See “Backlight” on page 179 for more information.
External Display
Section 2
Your phone has an external display on the outside of
the folder. When you close the phone, the external
display shows a digital clock.
Icons that appear in the external display indicate the
following:
• Incoming calls and messages
• Alarms and alerts
• Battery charge level
• Signal strength
Section 2: Understanding Your Phone
29
Your Phone’s Modes
Call Answer Mode
You can select how you wish to answer a call.
1. In standby mode, press the MENU (left) soft key (
),
then press 9wxyz (for Setup), 6 (for Call Options), and
3def for Call Answer. The following call answer options
appear in the display:
mno
䢇
䢇
䢇
Send Key — Only pressing SEND answers a call.
Folder Open — Opening the phone’s folder or pressing SEND
answers a call.
Any Key — Pressing any key except the END key or key
answers a call.
2. Use the navigation keys to highlight an option.
3. Press the
calls.
OK
key to select the method for answering
Section 2
Input mode
Input mode determines how you enter text, numbers
and symbols. While at any text entry screen, press the
Option (left) soft key (
), then choose the input mode
from the pop-up menu using the navigation keys.
Optional input modes are T9 Word, ABC, Symbol, 123,
and Canned. (See “Section 5: Entering Text” on page 63
for more information.)
Tip: You can also cycle between T9 Word, ABC, and 123 by repeatedly
pressing and holding the
key until the phone beeps.
30
Your Phone’s Modes
Lock Mode
When the phone is in Lock Mode, restrictions are
placed on phone use. You can receive calls and
messages, but cannot place outgoing calls (except for
emergency numbers) until you unlock the phone. Lock
Mode also restricts access to menus and the volume
key. Unlock your phone by entering the lock code when
prompted. (See “Change Lock” on page 190 for more
information.)
Standby Mode
Standby mode is the state of the phone once it has
found service and is idle. The phone goes into standby
mode:
• After you power the phone on.
• When you press
after a call or from within a menu.
END
In standby mode, you will see the time, day, and date
as well as all phone status icons.
Section 2
1. While in standby mode, enter a phone number, and
press SEND to place a call.
2. Press
END
to return to standby mode.
Receive Messages in Standby Mode
You can receive messages in standby mode. An alert
tone sounds and a notification message appears in the
display when a new message arrives.
• Press the View (right) soft key (
• Press the Ignore (left) soft key (
) to view now.
) to view later.
Section 2: Understanding Your Phone
31
Talk Mode
You can place and receive calls only when your phone
is on. While in a call your phone is in talk mode. Press
the MENU (left) soft key (
) to display a list of menu
options. See “In-Use Menu” on page 45 for more
information.
Enter/Exit Silent Mode
Silence the tones your keypad makes when you press a
key.
• In standby mode, press and hold
# . Entering Silent Mode
briefly appears in the display and your phone returns to standby
mode.
• While in Silent mode and standby mode, press and hold
# .
Exit Silent Mode briefly appears in the display and your phone
returns to standby mode.
Vibrate Mode
Section 2
䡵
In standby mode, repeatedly press the volume key ( )
down until Vibrate appears in the display.
The volume key is on the upper left side of phone, near
the left soft key (
).
Adjust the Ringer
1. In standby mode, press the volume key ( ) on the left
side of the phone up or down. Options are:
䢇
䢇
䢇
䢇
䢇
Silent
1 Beep
Vibrate
Vib+Ring
Level 1
䢇
䢇
䢇
䢇
Level 2
Level 3
Level 4
Level 5
2. When you are satisfied with the setting, press the
key. Your phone returns to standby mode.
32
OK
Your Phone’s Modes
Tip: You can also enter the Volume/Vibrate sub-menu by pressing the
MENU (left) soft key ( ), then pressing the 9 , 3 , 1 , and 1 keys.
Use the volume key on the left side of your phone to adjust the ringer
setting.
wxyz
def
@
))
@
))
Note: The Vibrate icon ( ) appears in the display when the phone is in
Vibrate mode. The or Vibrate+Ring icon (
) appears in the display
when the phone is in Vib+Ring mode.
Camera Mode
Camera mode lets you activate your phone’s camera to
take pictures. In Camera mode, you can also adjust the
resolution and appearance of your pictures and videos.
See “Section 11: Camera” on page 129 for more
information.
• Entering Camera Mode — In standby mode, press and hold
one of the Camera keys (
upper right side of your phone.
END
key.
Section 2: Understanding Your Phone
Section 2
• Exiting Camera Mode — Press the
) on the keypad or on the
33
34
Section 2
Section 3: Call Functions
Topics Covered
• Making a Call
• Answering a Call
• Calls
This section provides procedures for making and
answering calls. This section also describes features,
such as call logs and call timers, that help you make
calls and manage your call time.
Section 3
Section 3: Call Functions
35
Making a Call
1. With the phone on, enter the number you wish to call
using the keypad.
2. Press
SEND
to place the call.
Three-way Calling
Call two other numbers and connect them to your call
using three-way calling.
1. In standby mode, enter the number for the first party in
your call, then press SEND .
2. When connected, ask the other party to remain on the
line. Press SEND to place them on hold.
3. Enter the second party’s phone number and press
4. When the second party answers, press
three parties.
SEND
SEND
.
to connect all
Manual Pause Calling
To manually call a number with pause(s) without
storing it in your Contacts list:
1. In standby mode, enter the number you wish to call.
2. Press the Option (left) soft key (
). The following
pause options appear in the display:
䢇
䢇
P pause — A hard pause (waits for input from you).
T pause — A 2-second pause after which dialing resumes.
Section 3
3. Use the navigation keys to highlight the desired pause.
4. Press the OK key to enter the highlighted pause into the
number sequence.
5. Press
36
SEND
to call the number.
Making a Call
Tip: Store pauses along with the number if you plan to call the number
frequently.
Speed Dialing
Speed Dialing lets you place a call to any Contact stored
in your Contacts list by dialing the Contact’s Location
number.
1-Touch Dialing
Use 1-touch dialing to speed dial Contacts from 001
(Voice Mail) through 009.
䡲
In standby mode, press and hold the number key
representing the desired Contact’s Location number.
Example: To speed dial the Contact assigned Location 005, press and hold
the 5 key.
jkl
2-Touch Dialing
Use 2-touch dialing to speed dial Contacts from 010
through 099.
1. In standby mode, press and release the number key
representing the first digit of the desired Contact’s
Location number.
2. Press and hold the number key representing the second
digit of the desired Contact’s Location number.
3def
Section 3
Example: To speed dial the Contact assigned Location 035, press
then press and hold the 5 key.
jkl
Section 3: Call Functions
37
3-Touch Dialing
Use 3-touch dialing to speed dial Contacts from 100
through 500.
1. In standby mode, press and release the number key
representing the first digit of the desired Contact’s
Location number.
2. Press the number key representing the second digit of
the desired Contact’s Location number.
3. Press and hold the number key representing the third
digit of the desired Contact’s Location number.
Example: To speed dial the Contacts entry assigned to Location 325, press
, then press and hold the 5 key.
3 , press 2
def
abc
jkl
Voice Dialing
The voice recognition capabilities of your SCH-a850 are
exceptional due to advanced, speaker-independent
technology. This means you do not need to “train” your
phone to understand your voice. You can use your
voice in a natural manner to dial numbers.
Section 3
Note: End Calls Before relaunching the VoiceSignal voice recognition
software — When you use Voice Dialing to make a call, you must end that
call before you can use other Voice Commands. See for more information.
Use the Voice Dial command to dial any number stored
in your Contacts list by saying the name of the contact
(Name Dialing). You can also use Voice Dial to dial any
valid telephone number, even numbers not stored in
your contact list, by speaking the individual digits in
the number (Digit Dialing).
38
Making a Call
Voice Dialing Tips:
• Wait for the beep before speaking.
• Speak clearly at a normal volume, as if you were talking to
someone on the phone.
• When saying a name, say the first name then the last name.
Dialing a Name
To dial a name, do the following:
1. In standby mode, press and hold the
0
key.
“Say a Command” appears in the display and is
pronounced through the earpiece.
2. Say, “Voice Dial”.
You are prompted to “Say the name or number”.
3. Speak clearly and say the name of a person in your
Contacts list, first name followed by last name.
If the name is recognized, Voice Dial repeats the name
and dials the number.
If Voice Dial is not sure which name you said, it displays
a choice list of up to three names and prompts you with
“Did you say?” followed by the first name on the list.
4. Say “Yes” to confirm the name or “No” to hear the next
name, or use the keypad to select the correct name from
the list. (See “Voice Setting — Choice Lists” on page
157, for more information.)
䢇
Press the Repeat (right) soft key (
) to say the name again.
Press the Settings (left) soft key (
) and press the Cancel
right soft key (
) to exit Voice Dial without dialing.
Section 3: Call Functions
39
Section 3
䢇
If the recognized name has multiple numbers stored for it
(that is, Mobile, Office, Home, and so on), Voice Dial
displays the possible choices and prompts you with
“Which number?”
5. Say one of the following number types:
䢇
䢇
䢇
䢇
䢇
“Home”
“Office”
“Mobile”
“Pager”
“Fax”
Voice Dial dials the specified number.
Dialing a Number
To dial a number using Voice Dial, do the following:
1. In standby mode, press and hold the
0
key.
“Say a Command” appears in the display and is
pronounced through the speaker.
2. Say “Voice Dial”.
VoiceSignal prompts you to “Say the name or number.”
3. Speak clearly and say the telephone number of the
person you want to call. For example, say “7 8 1 9 7 0 5
2 0 0."
Section 3
If it recognizes the number, Voice Dial repeats it and dials
the number. If Voice Dial is not sure it has recognized the
number, it displays a choice list of up to three numbers
and prompts you with “Did you say?” followed by the
first number on the list.
40
Answering a Call
4. Say “Yes” to confirm the number or “No” to hear the
next one, or use the keypad to select the correct number
from the list. (See “Voice Setting — Choice Lists” on
page 157, for more information.)
䢇
䢇
Press the Repeat (right) soft key (
) to say the name again.
Press the Settings (left) soft key (
) and press the Cancel
right soft key (
) to exit Voice Dial without dialing.
Pause Dialing From a Contacts Entry
• If you voice dial a contact that contains (two-second) T pause(s)
simply wait for the pauses to pass and the dialing to complete.
• If you voice dial a contact that contains (hard) P pause(s), wait
for the appropriate prompt(s) from the number you are calling
(credit card number, bank account number, and so on) and
enter the appropriate response(s).
Answering a Call
Incoming
When you receive a call, the phone displays one of the
following:
• If the caller can be identified, the caller’s number (or name if it’s
in your Contacts) appears in the display.
• If the caller cannot be identified, Call from unavailable #, Call
from restricted #, or no number appears in the display.
Section 3: Call Functions
Section 3
Tip: Assign pictures to Contacts entries. The entry’s assigned picture
appears in the display when you receive a call from that entry. See
“Assigning a Picture to a Contacts Entry” on page 85.
41
The phone continues to notify you of the call until one
of the following events occur:
• You answer the call.
• The calling party ends the call.
• The call is sent to voicemail.
Call Notification Features
Your phone notifies you of a call in a variety of ways.
• Nine ring volume settings including 1-beep, Vibrate, Silent, or
Vibrate+Ring.
• Different ring types or melodies to distinguish callers.
• Name display with caller ID. (If the caller’s name is programmed
into your Contacts).
• Information about the last 20 incoming, missed, and outgoing
calls are automatically stored to a call log.
Set Call Ringer Volume
1. In standby mode, press the volume key on the left side of
the phone.
2. Press the volume key up or down to set the call ringer
volume as desired.
Adjust the Ringer
1. In standby mode, press the volume key ( ) on the left
side of the phone up or down. Options are:
䢇
䢇
䢇
Section 3
䢇
䢇
Silent
1 Beep
Vibrate
Vib+Ring
Level 1
䢇
䢇
䢇
䢇
Level 2
Level 3
Level 4
Level 5
2. Press OK once you’re satisfied with the setting. The
phone returns to standby mode.
42
Answering a Call
Tip: You can also enter the Volume/Vibrate sub menu by pressing the left
soft key ( ) MENU, then pressing 9 (for Set Up), 3 (for Sounds), 1
(for Volume/Vibrate), and 1 (Calls). Use the volume key to adjust the
ringer setting.
wxyz
@
def
@
))
))
Note: The vibrate icon ( ) appears in the display when the phone is in
Vibrate mode. In Vib+Ring mode, the vibrate+ring icon (
) appears.
Call Answer
Select from three methods for answering calls. This
option can be changed in the Setup menu.
1. In standby mode, press the left soft key (
) MENU,
then press 9wxyz (for Setup), 6 (for Call Options), and
3def for Call Answer. The following options appear in the
display:
mno
䢇
䢇
䢇
Send Key — Only pressing SEND answers a call.
Folder Open — Opening the phone’s folder or pressing SEND
answers a call.
Any Key — Pressing any key except END or answers a
call.
2. Use the navigation keys to highlight the Call Answer
option of your choice.
3. Press
OK
to activate the method for answering calls.
Call Waiting
1. Press SEND to connect and ask the calling party to remain
on the line.
Section 3: Call Functions
43
Section 3
If you’re on a call, your phone beeps when another call
is incoming. Contact your Wireless Carrier for
availability.
2. Press SEND and the second caller is placed on hold and
you’re returned to the original caller.
3. Press
SEND
to alternate between calls.
Caller ID
Caller ID lets you identify who is calling you by
displaying a caller’s number. If the caller’s name and
number are stored in Contacts, the caller’s name also
appears. If you’ve assigned a picture to the entry, it
appears in the display as well.
Call Block
You can prevent your number from displaying on
another phone’s caller ID screen by enabling Call
Block.
1. In standby mode, enter
,
6mno , 7pqrs .
2. Enter the number you wish to call, then press
SEND
.
Silence an Incoming Ring
During an incoming call, any of the following keys can
be pressed to silence the ringer:
• The up or down volume key ( ) on the left side of the phone.
• The END key ( ).
• The camera key (
) on the right side of the phone, but only
END
when the phone is closed.
Section 3
Ignore an Incoming Call
Ignored calls are immediately forwarded to Voice Mail.
䡲
44
During an incoming call, press the Ignore (left) soft key
(
). The incoming call is forwarded to Voice Mail.
Answering a Call
In-Use Menu
You can access a number of menus and features even
while in a call.
1. While in a call, press the MENU (left) soft key (
following options appear in the display:
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
). The
Calls — View your call logs.
Contacts — Display the Contacts menu.
Voice Memo — Record a voice memo.
Silent/Quit — Silence keypad tones.
Send Tel# — Send your phone number (if you’re the recipient
of the call). Send the recipient’s phone number (if you’re the
originator of the call).
Send DTMF — Send your phone number as tones (if you’re
the recipient of the call). Send the recipient’s phone number as
tones (if you’re the originator of the call).
Voice Privacy — Prevent recipients of your calls from seeing
your number on their display.
Location — Turn your GPS location on or set GPS location for
emergency calls only.
Version — View the software and hardware version
information for your phone.
2. Do one of the following:
䢇
䢇
Section 3: Call Functions
45
Section 3
䢇
Use the navigation key to highlight a menu or feature. Press the
OK key to open the highlighted menu or to activate the
highlighted feature.
Press the MUTE/Unmute (left) soft key (
) to disable/
enable the microphone.
Press the Back (right) soft key (
) to exit the menu.
Calls
Your phone has Call Logs that retain information about
Outgoing, Incoming, and Missed Calls. The Calls menu
lets you access this information for future reference, to
return calls, and to add new Contacts. You can also
view times for your last call and the total of all calls.
Tip: To quickly view a list of your most recent calls (outgoing, incoming,
and missed), briefly press the SEND key in standby mode. The Recent Calls
screen listing to 20 of your most recent calls appears in the display.
Outgoing
The last 20 outgoing calls are stored in the Outgoing
calls log. Review the Outgoing calls log for the time and
date of a call, as well as other information.
1. In standby mode, press the MENU (left) soft key (
),
then press 2 abc (for Calls) and 1 for Outgoing. A list
of your outgoing calls appears in the display.
@
))
2. Use the navigation keys to highlight a call, then press
OK to view further information about the call.
3. Press the Option (left) soft key (
options appear in the display:
䢇
䢇
䢇
Section 3
䢇
). The following
Talk — Call the selected number.
Save — Save the number to your Contacts.
Prepend — Add a prefix to the number.
Erase — Erase the selected call from your Outgoing call list.
4. Use the navigation keys to highlight an option.
5. Press
46
OK
to perform the highlighted option’s function.
Calls
Incoming
The last 20 Incoming calls are stored in your phone’s
Incoming call log. You can review the Incoming call log
for time and date of the call, as well as other
information.
1. In standby mode, press the MENU (left) soft key (
),
then press 2 abc (for Calls) and 2 abc for Incoming. A list
of your Incoming calls appears in the display.
2. Use the navigation keys to highlight a call, then press
OK to view further information about the call.
3. Press the Option (left) soft key (
) to display a pop-up
menu containing the following options:
䢇
䢇
䢇
䢇
Talk — Call the selected number.
Save — Save the number to your Contacts.
Prepend — Add a prefix to the number.
Erase — Erase the selected call from your Incoming call list.
4. Use the navigation keys to highlight an option.
5. Press
OK
to perform the highlighted option’s function.
Missed
The last 20 missed calls (calls not picked up) are stored
in the Missed call log. Review the Missed call log for
the time and date of the call, as well as other
information.
2. Use the navigation keys to highlight a call, then press
OK to view further information about the call.
Section 3: Call Functions
47
Section 3
1. In standby mode, press the MENU (left) soft key (
),
then press 2 abc (for Calls) and 3def for Missed. A list of
your missed calls appears in the display.
3. Press the Option (left) soft key (
) to display a pop-up
menu that contains the following options:
䢇
䢇
䢇
䢇
Talk — Call the selected number.
Save — Save the number to your Contacts.
Prepend — Add a prefix to the number.
Erase — Erase the selected call from your Incoming call list.
4. Use the navigation keys to highlight an option.
5. Press
OK
to perform the highlighted option’s function.
Erase Logs
You can erase Outgoing, Incoming, Missed, or All Calls.
Erase All Calls
1. In standby mode, press the MENU (left) soft key (
),
then press 2 abc (for Calls), 4 (for Erase Logs), and
4 for All Calls. “Erase All Calls?” appears in the
display as well as the options Yes and No.
ghi
ghi
2. Use the navigation keys to highlight Yes to erase all calls
from the call logs, then press OK , or highlight No and
press OK to exit without erasing call logs.
Call Timer
View the duration of your last call, total calls, and calls
made during the life of your phone using the Call timer
feature. Call timer is not for billing purposes.
Section 3
1. In standby mode, press the MENU (left) soft key (
),
then press 2 abc (for Calls) and 5 jkl for Call Timer. The
following options appear in the display:
䢇
䢇
48
Last Call — View the duration of your last call.
Total — View the duration of total, incoming and outgoing
calls made on your phone since the last erasure.
Calls
䢇
䢇
LifeTime — View the duration of all calls on your phone since
activation (LifeTime timers cannot be erased).
Erase Total — Erases the counters for the Total call timer.
2. Press the number of the option you wish enter, or use the
navigation keys to highlight the option and press OK .
3. Press
OK
to exit the Option menu.
Note: Although Total call timers can be erased, LifeTime call timers can
never be erased.
Data Counter
Use Data Counter to view the amount of data that has
been sent or received (or a total of both) using the data
services that your phone supports. The Data Counter
can be a helpful tool for monitoring data usage,
especially if your service agreement has specified
limits.
1. In standby mode, press the MENU (left) soft key (
),
then press 2 abc (for Calls) and 6 for Data Counter. The
following options appear in the display:
mno
䢇
䢇
䢇
Section 3: Call Functions
49
Section 3
䢇
Transmit — View the amount of data (in kilobytes) that your
phone has transmitted since last being reset.
Received — View the amount of data (in kilobytes) that your
phone has received since last being reset.
Total — View the amount of data (in kilobytes) that your
phone has transmitted and received since last being reset.
Erase Total — Erase (reset) the Transmit, Received, and Total
data counters.
Store Numbers from Call Logs
Store numbers from your Outgoing, Incoming, and
Missed call logs to Contacts.
Tip: In standby mode, briefly press SEND to display the Recent Calls list. You
can then select any call in the list to save to Contacts.
1. In standby mode, press the MENU (left) soft key (
then press 2 abc for Calls.
),
2. Press the corresponding number on the keypad to view
call logs for the following call types.
䢇
1@
䢇
2
䢇
3def
))
abc
for Outgoing
for Incoming
for Missed
3. Use the navigation keys to highlight the number you wish
to store in Contacts and press OK .
4. Press the Option (left) soft key (
), then use the
navigation keys to highlight Save.
5. Choose to add the number as a New Entry, or Find a
number in your Contacts with which to associate the
number.
Section 3
6. Follow the prompts to store the number to the Contacts.
50
Section 4: Menu Navigation
Section 4
Topics Covered
• Menu Navigation
• Menu Shortcuts
• Navigation Key Shortcuts
• Navigate Using a Shortcut
• Menu Outline
This section explains the menu navigation for your
phone. It also includes an outline of all the available
menus associated with your phone.
Section 4: Menu Navigation
51
Section 4
Menu Navigation
Access the menus and sub menus in your phone using
the navigation key (
) and soft keys (
), or
use a shortcut.
OK @
1. In standby mode press the MENU (left) soft key (
The first of several menus appear in the display.
).
Note: More than one menu may appear in your display. This setting can be
modified in the Display/Menu Style menu.
2. Use the navigation key to browse through the menus.
3. Press OK to enter the menu or sub menu that appears
in the display.
4. Press the right soft key (
previous menu.
) Back to return to the
Return to the Previous Menu
• Press the right soft key (
) Back to return to a previous
menu.
• When Back does not appear in the display, press
CLR
to
return to the previous menu.
Menu Shortcuts
Use shortcuts to quickly access menus and sub menus.
Press the MENU (left) soft key ( ), then press the
number to the right of the menu to jump to the desired
menu, sub menu, or feature. For example, to jump to
the Outbox sub menu, press the MENU (left) soft key
( ), then press 3def (for Messages) and 5 jkl for
Outbox.
52
Navigation Key Shortcuts
Navigation Key Shortcuts
*Scheduler
Mobile Web
OK @
@metro
Messages
*Scheduler can be customized. Press the Menu
(left) soft key (
), then press 9wxyz , 7pqrs .
Navigate Using a Shortcut
You can also access menus and sub menus using menu
numbers. Enter the menu number after pressing the
MENU (left) soft key (
) to go directly to the menu or
sub menu of your choice. Before you can navigate using
a shortcut, you’ll need the menu or sub-menu number
that you wish to access.
Tip: Use the list of menus and sub menus, which begins on page 54, to
navigate using shortcuts.
1. In standby mode, press the MENU (left) soft key (
).
2. Press the number of the menu, sub menu, and so on for
the feature that you wish to access.
Section 4: Menu Navigation
53
Section 4
In standby mode, press a navigation key to launch the
key’s corresponding application.
Example: Press the left soft key ( ) for MENU, then press 8 , 5 .
This takes you to the Tools (Menu 8), and then to the To Do List (sub menu
5).
Section 4
tuv
Menu Outline
1
Contacts
1.1
1.2
1.3
1.4
1.5
2
Calls
2.1
2.2
2.3
2.4
54
Find
Add
1.2.1 Number
1.2.2 E-Mail
Rename Group
1.3.1 Friend
1.3.2 Family
1.3.3 Colleague
1.3.4 VIP
1.3.5 No Name
My Phone#
Memory
Outgoing
Incoming
Missed
Erase Logs
2.4.1 Outgoing
2.4.2 Incoming
2.4.3 Missed
jkl
Menu Outline
2.5
3
Section 4
2.6
2.4.4 All Calls
Call Timer
2.5.1 Last Call
2.5.2 Total
2.5.3 LifeTime
2.5.4 Erase Total
Data Counter
2.6.1 Transmit
2.6.2 Received
2.6.3 Total
2.6.4 Erase Total
Messages
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
New Text Msg
New Pic Msg
New Handwr.Msg
Inbox
Outbox
Draft Box
Voice Mail
Msg Setting
3.8.1 Text
3.8.1.1
Save In Outbox
3.8.1.2
Insert Sign.
3.8.1.3
Delivery Ack
3.8.1.4
Direct View
3.8.1.5
Signature
3.8.1.6
Callback #
3.8.1.7
Block Address
Section 4: Menu Navigation
55
3.8.2 Pic. Msg
Section 4
3.8.2.1
3.8.2.2
3.8.2.3
Save In Outbox
Delivery Ack
Retrieval Mode
3.8.3 General
3.8.3.1
3.8.3.2
3.8.3.3
Entry Mode
Canned Msg.
Msg. Alert
3.8.3.3.1
3.8.3.3.2
3.8.3.3.3
3.8.3.4
3.8.3.5
3.9
4
@metro
Gallery
6.1
56
Get In Web
@metro
5.1
6
Erase Msg
3.9.1 Voice
3.9.2 In Box
3.9.3 Out Box
3.9.4 Draft
3.9.5 All Messages
Mobile Web
4.1
5
Auto Delete
Voice Mail #
Image Gallery
6.1.1 Preloaded
6.1.2 Downloaded
Volume/Vibrate
Type
Reminder
Menu Outline
6.2
7
Camera
7.1
7.2
7.3
8
Section 4
6.3
Melody Gallery
6.2.1 Preloaded
6.2.2 Downloaded
Animelody Gallery
Take a Picture
Picture Gallery
Settings
7.3.1 Brightness
7.3.2 Fun Frames
7.3.3 Color Tones
7.3.4 Shutter Sound
7.3.5 Quality
7.3.6 White Balance
Tools
8.1
Voice Recognition
8.1.1 Voice Command
8.1.2 Voice Memo
8.1.2.1
8.1.2.2
8.1.2.3
Record
Review
Erase All
8.1.3 TTS
8.1.4 Voice Setting
8.1.4.1
Digit Dialing
8.1.4.1.1
8.1.4.1.2
8.1.4.2
Adapt Digits
Reset Digits
Sensitivity
Section 4: Menu Navigation
57
8.1.4.2.1
8.1.4.2.2
8.1.4.3
Choice Lists
Section 4
8.1.4.3.1
8.1.4.3.2
8.1.4.3.3
8.1.4.4
8.2
8.3
8.4
8.5
8.6
8.7
8.8
8.9
8.0
9
Today
Scheduler
Jump To Date
To Do List
Memo Pad
Count Down
Alarm Clock
8.8.1 Alarm Clock 1
8.8.2 Alarm Clock 2
8.8.3 Alarm Clock 3
World Time
Calculator
Location
Display
9.2.1 Menu Style
9.2.2 Animation
9.2.2.1
58
Prompts
Digits
Names
Name Settings
Voice Launch
About
Setup
9.1
9.2
Name Dialing
Digit Dialing
Contacts
Sound
8.1.4.4.1
8.1.4.4.2
8.1.4.4.3
8.1.4.4.4
8.1.4.5
8.1.4.6
Commands
Names
Opening
Menu Outline
9.2.2.1.1
9.2.2.1.2
9.2.2.2
Closing
My Image
Preloaded
Section 4
9.2.2.2.1
9.2.2.2.2
9.2.2.3
My Image
Preloaded
Wallpaper
9.2.2.3.1
9.2.2.3.2
My Image
Preloaded
9.2.3 Banner
9.2.4 Backlight
9.2.4.1
9.2.4.2
9.2.4.3
9.2.5
9.2.6
9.2.7
9.2.8
Auto Hyphen
Dial Digits
Dial Screen
Contrast
9.2.8.1
9.2.8.2
9.3
LCD
Keypad
Power save
Main LCD
Front LCD
9.2.9 Service LED
Sounds
9.3.1 Volume/Vibrate
9.3.1.1
9.3.1.2
Calls
Alarm
9.3.2 Ringer Type
9.3.2.1
9.3.2.2
9.3.2.3
9.3.2.4
Calls
Alarm
Data
Planner
9.3.3 Key Beep
9.3.3.1
9.3.3.2
Volume
Tone Length
Section 4: Menu Navigation
59
9.3.4 Alerts
Section 4
9.3.4.1
9.3.4.2
9.3.4.3
9.3.4.4
9.3.4.5
9.3.4.6
9.3.4.7
9.4
9.5
9.3.5 Power On/Off
9.3.6 Roam Ringer
9.3.7 Whisper Mode
Network
9.4.1 Set NAM
9.4.2 Roam Option
Security
9.5.1 Lock Phone
9.5.2 Change Lock
9.5.3 Emergency #
9.5.4 Voice Privacy
9.5.5 Restriction
9.5.5.1
9.5.5.2
9.5.5.3
9.6
Outgoing
Incoming
Contacts
9.5.6 Erase Memory
9.5.7 Reset Phone
Call Options
9.6.1 Auto Retry
9.6.2 Data
9.6.2.1
60
Minute Beep
Service
Connect
Disconnect
Fade
Roam
Privacy
Auto Detect
Menu Outline
9.6.2.2
9.6.3 Call Answer
9.6.4 Auto Answer
9.6.5 TTY Mode
9.6.6 Airplane Mode
Shortcut
Language
Clock Set
Version
Section 4: Menu Navigation
Section 4
9.7
9.8
9.9
9.0
Baud Rate
61
62
Section 4
Section 5: Entering Text
Topics Covered
• Changing the Text Entry Mode
• Using T9 Mode
• Entering Upper and Lower Case
• Entering Symbols
Section 5
• Entering Numbers
This section outlines how to select the desired text
input mode when entering characters into your
phone. This section also describes how to use the T9
predictive text entry system to reduce the number of
key strokes you must make when entering text.
Section 5: Entering Text
63
Changing the Text Entry Mode
Text messages can be made up of alphabetical
characters, numbers, and symbols. You can use the
following text entry modes to simplify text entry:
• T9 Word — Press each key only once to enter the letter of the
word that you’re spelling.
• ABC — Enter letters, numbers, and symbols by repeatedly
pressing each key until the desired character (as shown on the
key) appears in the display. ABC mode letter options are:
Section 5
• ABC — Enter all upper case letters
• Abc — Enter initial capital letters
• abc — Enter all lower case letters
• Symbol — Enter symbols into your message by pressing the
number above the symbol in the Symbol pop-up window.
• 123 — Enter numbers by pressing the corresponding key on
the keypad.
• Canned — Select some pre-composed text for inclusion in your
message.
The current text entry mode (ABC, 123, or T9 Word) is
indicated in the lower part of a text entry screen. To
change the text entry mode, do the following:
䡲
While composing a text message, press the Option (left) soft key
(
). The following options appear in the display:
䢇
䢇
䢇
䢇
䢇
64
T9 Word
ABC
Symbol
123
Canned
Using T9® Mode
Note: The Canned option is initially hidden in the pop-up menu. Use the
navigation keys to scroll down and select this option.
Using T9® Mode
1. In standby mode, press the MENU (left) soft key (
),
then press 3def (for Messages) and 1 for New Text
Msg.
@
))
2. Enter the phone number of the recipient, then press
OK .
3. Press the Option (left) soft key (
options appear in the display:
䢇
䢇
䢇
䢇
䢇
). The following
T9 Word
ABC
Symbol
123
Canned
Note: The Canned option is initially hidden in the pop-up menu. Use the
navigation keys to scroll down and select this option.
4. T9 Word is highlighted. Press
OK
.
Section 5: Entering Text
65
Section 5
T9 Word recognizes commonly used words for the
numeric sequence of key presses and inserts the word
into your message. T9 Word is much faster than the
traditional method of text entry (ABC) and requires only
one key press per letter of the word that you’re spelling.
䢇
For practice, enter the word “Samsung” by pressing each of
the following keys only once:
7pqrs
Section 5
S
2 abc
A
6mno
M
7pqrs
S
8 tuv
4 ghi
6mno
U
N
G
T9 Word recognizes that the most commonly used word for the
numeric sequence you just entered is “Samsung.” If more than
one word shares the same numeric sequence, T9 Word
provides the most commonly used word. Press 0 to display
other words, if available.
Entering Upper and Lower Case
1. In standby mode, press the MENU (left) soft key (
),
then press 3def (for Messages) and 1 for New Text
Msg.
@
))
2. Enter the phone number of the recipient, then press
3. Press the Option (left) soft key (
options appear in the display:
䢇
䢇
䢇
䢇
䢇
OK
). The following
T9 Word
ABC
Symbol
123
Canned
Note: The Canned option is initially hidden in the pop-up menu. Use the
navigation keys to scroll down and select this option.
66
.
Entering Symbols
4. T9 Word is highlighted. Use the navigation keys to
highlight ABC, then press OK .
䢇
䢇
䢇
䢇
Enter characters while in ABC mode by pressing the key
labeled with the desired characters (such as 4 ghi for “h”).
Press the key repeatedly until the desired character appears in
the display.
Pause briefly and the displayed character is accepted and
inserted into your message.
Press # to enter a space.
Section 5
Entering Symbols
Symbol mode enables you to enter symbols such as
“@” or “%” into a text message.
1. In standby mode, press the MENU (left) soft key (
),
then press 3def (for Messages) and 1 for New Text
Msg.
@
))
2. Enter the phone number of the recipient, then press
OK .
3. Press the Option (left) soft key (
options appear in the display:
䢇
䢇
䢇
䢇
䢇
). The following
T9 Word
ABC
Symbol
123
Canned
Note: The Canned option is initially hidden in the pop-up menu. Use the
navigation keys to scroll down and select this option.
Section 5: Entering Text
67
4. T9 Word is highlighted. Use the navigation keys to
highlight Symbol, then press OK . The first of four
symbol screens appear in the display.
5. Use the navigation keys to page through the other
symbols, if desired.
6. Press the key that corresponds with the symbol that you
wish to enter. For example, press 4 for an exclamation
point (!).
Section 5
ghi
7. Repeat steps 3 through 6 to insert as many symbols into
your message as desired.
Entering Numbers
Enter numbers into a text message while in 123 mode.
1. In standby mode, press the MENU (left) soft key (
),
then press 3def (for Messages) and 1 for New Text
Msg.
@
))
2. Enter the phone number of the recipient, then press
3. Press the Option (left) soft key (
options appear in the display:
䢇
䢇
䢇
䢇
䢇
OK
). The following
T9 Word
ABC
Symbol
123
Canned
Note: The Canned option is initially hidden in the pop-up menu. Use the
navigation keys to scroll down and select this option.
68
.
Entering Numbers
4. T9 Word is highlighted. Use the navigation keys to
highlight 123, then press OK .
5. Press the key containing the corresponding number that
you wish to insert into your message.
Section 5
Section 5: Entering Text
69
70
Section 5
Section 6: Understanding Your Contacts
Topics Covered
• Contacts
• Adding a New Contacts Entry
• Finding a Contacts Entry
• Renaming a Contacts Group
• Editing an Existing Contacts Entry
• Saving a Number After a Call
• Deleting a Contacts Entry
• Finding My Phone Number
• Memory
Section 6: Understanding Your Contacts
71
Section 6
This section details how you can manage your daily
contacts by storing their names and numbers in your
Contacts list. You can have your Contacts entries
sorted by name, entry, or group.
Contacts
Up to 500 entries can be stored in Contacts. Each entry
can have up to five associated phone numbers and two
e-mail addresses. Each phone number can be up to 32
digits in length, including hard pauses, and associated
names can be up to 22 characters in length. You can
specify the memory location of your choice for each
entry. You can also mark your Contacts list as Restricted
to prevent unauthorized viewing. (See “Restriction” on
page 193 for more information).
Note: You cannot store numbers to locations 311 or 411 in your Contacts.
These locations are reserved for emergency numbers only.
Tip: One-Touch Dialing, Two-Touch Dialing, and Three-Touch Dialing
allow you to call numbers stored in Contacts faster.
Open Contacts
Section 6
1. In standby mode, press the MENU (left) soft key (
),
then press 1@ (for Contacts). The following options
appear in the display:
))
䢇
䢇
䢇
䢇
䢇
Find — Find a phone number By Name, By Entry, or By Group.
Add — Add a number or e-mail to your Contacts.
Rename Group — Rename one of your five groups.
My Phone# — View the 10-digit number assigned to your
phone by your wireless carrier.
Memory — Display available memory for Contact entries.
2. Use the navigation keys to highlight the option of your
choice, and press the OK key.
72
Adding a New Contacts Entry
Tip: You can also press the keypad number key that corresponds to the
menu option number.
Adding a New Contacts Entry
You can use either of two methods to add an entirely
new entry to Contacts.
Dial Method
1. Using the keypad, enter the number you wish to add to
your Contacts.
2. Press the Save (right) soft key (
options appear in the display:
䢇
䢇
). The following
New Entry — Lets you create a new Contacts entry.
Find — Lets you add the number you entered to an existing
Contacts entry.
Home
Office
Pager
Fax
Mobile
4. Use the navigation keys to highlight the type that
matches your new entry, then press the OK key.
5. Use the keypad to enter a name to associate with the
Contacts entry.
6. Press the
OK
key to save the entry.
Section 6: Understanding Your Contacts
73
Section 6
3. Use the navigation keys to select New Entry and press
the OK key. The Select Type screen appears in the
display showing the following icons:
Menu Method
1. In standby mode, press the MENU (left) soft key (
),
then press 1 (for Contacts) and 2 abc for Add. The
following options appear in the display:
@
䢇
䢇
))
Number
E-Mail
2. Use the navigation keys to highlight the desired option,
then press the OK key.
3. Enter information for the selected option, then press the
OK key. The following Confirm options appear in the
display:
䢇
䢇
New Entry
Find
Section 6
4. With New Entry highlighted, press the OK key. The
following (number type) icons appear in the display:
Home
Office
Pager
Fax
Mobile
Use the navigation keys to highlight the type that
matches your new entry, then press the OK key.
5. Use the keypad to enter a name to associate with the
Contacts entry.
6. Press the
74
OK
key to save the entry.
Finding a Contacts Entry
Finding a Contacts Entry
Shortcut Method
You can use the CONTACTS shortcut (right soft) key to
view contact information stored in your Contacts list.
1. In standby mode, press CONTACTS (right) soft key (
).
The Find screen appears in the display with By Name
showing.
2. Use the navigation keys to select the method you want to
use to find an entry. The following find methods appear
in the display:
䢇
䢇
䢇
By Name — Search Contacts alphabetically by name.
By Entry — Search Contacts by entry number.
By Group — Search Contacts by selecting one of the five
available groups.
Voice Method
Note: The Contacts command shows the requested contact information in
the display but does not dial any phone numbers for the contact.
To look up information for a specific contact:
1. In standby mode, press and hold the
VoiceSignal.
0
key to launch
“Say a Command” appears in the display and is
pronounced through the speaker.
2. Say “Contacts”.
VoiceSignal prompts you to “Say the name.”
Section 6: Understanding Your Contacts
75
Section 6
You can also use the VoiceSignal Contacts command to
view contact information for any named contact stored
in your Contacts list by saying the name.
3. Speak clearly and say the full name of the person you
want to call, exactly as it is entered in your contact list.
䢇
䢇
If VoiceSignal recognizes the name you said, the contact
information for that name appears in the display.
If VoiceSignal does not recognize the name you said, a choice
list of up to three names appears in the display, and
VoiceSignal prompts you with “Did you say?” followed by the
first name on the list.
4. Say “Yes” to confirm the name or “No” to hear the next
name, or use the keypad to select the correct name from
the list. (See ‘Voice Setting — Choice Lists” on page
157, for more information.)
䢇
䢇
To say the name again, press the Repeat (right) soft (
) key.
To exit VoiceSignal without dialing, press the Settings (left) soft
(
) key and press the Cancel (right) soft (
).
5. The contact information for the name you selected
appears in the display.
Section 6
Menu Method
If you’ve stored a name entry in Contacts, Find allows
you to find it quickly.
1. In standby mode, press the MENU (left) soft key (
),
then press 1 (for Contacts) and 1 for Find. The
Find screen appears in the display with By Name
showing.
@
))
@
))
2. Use the navigation keys to select the method you want to
use to find an entry. The following find methods appear
in the display:
䢇
䢇
76
By Name — Search Contacts alphabetically by name.
By Entry — Search Contacts by entry number.
Finding a Contacts Entry
䢇
By Group — Search Contacts by selecting one of the five
available groups.
Find by Name
1. With By Name showing in the Find screen, enter a name
as entered in Contacts. For example, if you saved the
name as Amy Smith, begin the search by pressing 2 abc
(for “A”).
As you enter letters, the entry number and names of the
closest matches appear in the display.
2. When the desired entry appears in the display, use the
navigation keys to highlight the entry (if necessary).
3. Press
SEND
4. Press the
to dial the number associated with the name.
OK
key to view information about the entry.
5. Press the Option (left) soft key (
options appear in the display:
䢇
䢇
Edit — Edit details of the highlighted name.
Erase — Erase the name and associated information.
Add New — Add a new entry to Contacts.
Section 6
䢇
). The following
6. Use the navigation keys to highlight an option, then
press the OK key. The highlighted option’s sub menu
appears in the display.
Find by Entry
This option allows you to find a stored entry by its
location number.
1. With By Name showing in the Find screen, press the Up
navigation key to highlight By Name.
2. Use the Left and Right navigation keys to show By
Entry.
Section 6: Understanding Your Contacts
77
3. Enter the number that corresponds to the entry, or use
the navigation keys to highlight the desired entry.
4. Once the entry is highlighted, press the Option (left) soft
key (
). The following options appear in the display:
䢇
䢇
䢇
Edit — Edit details of the highlighted name.
Erase — Erase the Name and associated information.
Add New — Add a new entry to your Contacts.
5. Use the navigation keys to highlight an option, then press
the OK key. The highlighted option’s sub menu appears
in the display.
Find by Group
This option allows you to find a stored entry in a
related group.
1. With By Name showing in the Find screen, press the Up
navigation key to highlight By Name.
Section 6
2. Use the Left and Right navigation keys to show By
Group.
3. Press the Down navigation key briefly to highlight the
group name field.
4. Use the Left and Right navigation keys to show the
name of the group that you wish to search. As each
group name appears in the display, entries assigned to
that group also appear in the display beneath the group
name.
5. Use the navigation keys to highlight the desired entry.
6. Press the
78
OK
key to display information about the entry.
Renaming a Contacts Group
Renaming a Contacts Group
Use this option to rename a group in Contacts.
1. In standby mode, press the MENU (left) soft key (
),
then press 1 (for Contacts) and 3def for Rename
Group.
@
))
2. Use the navigation keys to highlight the group name that
you wish to change, then press the OK key. The current
name of the group appears in the display with a flashing
cursor at the end of the name.
3. Enter changes to the group name using the keypad. See
“Section 5: Entering Text” on page 63 for more
information.
4. When you have completed your changes to the group
name, press the OK key.
Editing an Existing Contacts Entry
Section 6
Editing Contacts Name and Numbers
1. Find the Contacts entry you wish to change. See
“Finding a Contacts Entry” on page 75 for more
information.
2. Use the navigation keys to highlight the entry and press
the OK key.
3. Use the navigation keys to highlight the contents of a
field within the entry that you wish to change, then press
the Option (left) soft key (
). The following pop-up
menu options appear in the display:
䢇
䢇
Talk — Dials the highlighted number.
Edit — Lets you change the highlighted number.
Section 6: Understanding Your Contacts
79
䢇
Erase — Deletes the highlighted number.
Important! If a Contacts entry has only one number, selecting the Erase
option can delete the Contacts entry itself.
4. Use the navigation keys to highlight Edit, then press the
OK key.
䢇
䢇
Press
to backspace and delete numbers or letters.
Press and hold
to clear all numbers or letters in the
highlighted field.
CLR
CLR
5. When you’re finished changing the contents of a field,
press the OK key. Your changes are saved and a
confirmation message appears in the display.
Section 6
Add Pauses to Contacts Numbers
Calls to automated systems such as banking services
often require a password or account number. Instead of
manually entering these numbers, you can store them
in a Contacts entry with the phone number and with
special characters called pauses, up to a maximum of 32
digits.
• P pause — Stops the calling sequence until the phone receives
further input.
• T pause — Stops the calling sequence for two seconds, then
sends the remaining digits.
Note: You can enter multiple two-second pauses to extend the length of a
pause. For example, two consecutive two-second pauses cause a total
pause time of four seconds. Keep in mind pauses count as digits towards
the 32-digit maximum.
To add pauses to a Contacts entry number, do the
following:
80
Editing an Existing Contacts Entry
1. Find the Contacts entry associated with the number you
want to include one or more pauses. See “Finding a
Contacts Entry” on page 75 for more information.
2. Select and edit the desired number. See “Editing an
Existing Contacts Entry” on page 79 for more
information.
3. Press the Option (left) soft key (
). The following
pause options appear in the display:
䢇
䢇
P pause — A hard pause (waits for input from you).
T pause — A 2-second pause after which dialing resumes.
4. Use the navigation keys to highlight the pause option of
your choice.
5. Press the OK key to enter the highlighted pause into the
number sequence.
6. When you’re finished entering information, press the
OK key to store the number to Contacts.
Pause Dial from Contacts
2. If you stored the number using (hard) P pause(s), recall
the number from Contacts and wait for the appropriate
prompt from the dialed number.
3. Press
SEND
to dial the number.
Edit an Existing E-mail Address
1. Find the Contacts entry you want to edit. See “Finding a
Contacts Entry” on page 75 for more information.
2. Use the navigation keys to highlight the desired Contacts
entry.
Section 6: Understanding Your Contacts
81
Section 6
1. If you stored the number using (two-second) T pause(s),
simply recall the number from Contacts.
3. Press the Option (left) soft key (
). A pop-up menu
appears in the display with Edit highlighted.
4. Press the OK key. The selected Contacts entry
information appears in the display.
5. Use the navigation keys to highlight the E-Mail field.
6. Use the keypad to edit the e-mail address. See “Section
5: Entering Text” on page 63 for more information.
7. Press the
OK
key to save your changes.
Adding an @ Symbol
To insert the @ symbol in an e-mail address, do the
following:
1. If needed, use the navigation keys to move the cursor to
the appropriate place in the e-mail address.
2. Press the Option (left) soft key (
).
Section 6
3. Use the navigation keys to select the Symbol option,
then press the OK key.
4. Press 2 abc to enter the @ symbol.
5. Press the
OK
key to save your changes.
Adding a Domain Type (.com, .edu, or .net)
1. If needed, use the navigation keys to move the cursor to
the appropriate place in the e-mail address.
2. Press the Option (left) soft key (
).
3. Use the navigation keys to highlight .com, then use the
navigation keys to show the desired domain type (.com,
.edu, .net), then press the OK key.
4. Press the
82
OK
key to save your changes.
Editing an Existing Contacts Entry
Assign a Speed Dial Location to a Contacts Entry
A Contacts entry’s Location number corresponds to the
number keys you press to speed dial that entry. For
example:
• To speed dial the Contacts entry assigned to Location 005,
press and hold the 5 jkl key, (1-touch dialing).
• To speed dial the Contacts entry assigned to Location 035,
press 3def then press and hold the 5 jkl key, (2-touch dialing).
• To speed dial the Contacts entry assigned to Location 235,
press 2 abc , press 3def , then press and hold the 5 jkl key
(3-touch dialing).
Location numbers can be assigned automatically or
manually during new entry creation or can be changed
by editing an existing entry.
Automatic Location Assignment
To let your phone automatically assign a Location
number to a new Contacts entry, do the following:
Create the new Contacts entry by following either of the
procedures provided in “Adding a New Contacts Entry”
on page 73.
Manual Location Assignment
To manually assign a Location number to a new
Contacts entry, do the following:
1. Follow either of the New Contacts entry procedures (see
“Adding a New Contacts Entry” on page 73) until you
enter a name for the entry.
2. After entering the Contacts entry name, do not press the
OK key. Instead, use the navigation keys to highlight the
Location field.
Section 6: Understanding Your Contacts
83
Section 6
䡲
3. Enter the new location using the keypad.
Tip: You can also use the Left and Right navigation keys to browse empty
speed dial locations.
Important! Do not enter Location values 001, 311, or 411. These numbers
are already assigned to Voicemail (001) and to special network features
(311, 411).
4. Press the
OK
key to save your changes.
Changing a Speed Dial Location
1. Find the Contacts entry you want to edit. See “Finding a
Contacts Entry” on page 75 for more information.
2. Use the navigation keys to highlight the desired entry.
3. Press the
OK
key.
4. Use the navigation keys to highlight the Location field.
Section 6
5. Press the Edit (left) soft key (
).
6. Enter the new location using the keypad.
Tip: You can also use the Left and Right navigation keys to browse empty
speed dial locations.
Important! Do not enter Location values 001, 311, or 411. These numbers
are already assigned to Voicemail (001) and to special network features
(311, 411).
7. Press the
OK
key to save your changes.
Assign Speed Dial Types
If you have more than one number (or type, such as
Mobile or Office) for an entry, you can select which of
84
Editing an Existing Contacts Entry
those numbers are dialed when the associated speed
dial key is pressed by doing the following:
1. Find the Contacts entry you want to edit. See “Finding a
Contacts Entry” on page 75 for more information.
2. Use the navigation keys to highlight the desired entry.
3. Press the
OK
key.
4. Use the navigation keys to highlight the SpeedDial field,
then press the Edit (left) soft key (
).
5. Use the Left and Right navigation keys to select the
desired number (type) for speed dialing.
6. Press the
OK
key. Your changes are saved.
Assigning a Picture to a Contacts Entry
When you assign a picture to a Contacts entry, the
picture that you assigned to the entry appears in the
display when you receive a call from the entry.
2. Use the navigation keys to highlight the desired Contact.
3. Press the
display.
OK
key. Contact information appears in the
4. Use the navigation keys to highlight the Picture ID field,
then the Option (left) soft key (
). A pop-up menu
appears in the display with the Edit option highlighted.
5. Press the
display:
䢇
䢇
䢇
OK
key. The following options appear in the
No Image
Image Gallery
Photo Gallery
Section 6: Understanding Your Contacts
85
Section 6
1. Find the Contacts entry you want to edit. See “Finding a
Contacts Entry” on page 75 for more information.
6. Use the navigation keys to highlight Image Gallery or
Photo Gallery.
7. Press the
OK
key.
8. Use the navigation keys to highlight the image or picture
that you wish to assign to the Contacts entry.
9. Press the OK key. The Contacts entry screen appears in
the display with the selected image or picture file name
in the Picture ID field.
10. Press the OK key to save the Picture ID assignment to
the selected Contacts entry.
Saving a Number After a Call
Once you finish a call, you can store the caller’s number
to your Contacts list.
Section 6
Note: If the call was incoming and Caller ID information was unavailable,
then the Save option is also unavailable.
1. Press
to end your call. The call time, length of call,
phone number, and name of the party (if available)
appear in the display.
END
2. Press the Save (right) soft key (
options appear in the display:
䢇
䢇
). The following
New Entry — Lets you create a new Contacts entry.
Find — Lets you add the number you entered to an existing
Contacts entry.
3. Follow the instructions in the upcoming sections
depending on whether the number is a new entry or you
wish to add it to an existing entry.
86
Saving a Number After a Call
Add a New Entry
1. Use the navigation keys to highlight New Entry and
press the OK key. The Select Type screen appears in
the display showing the following icons:
Home
Office
Pager
Fax
Mobile
2. Use the navigation keys to highlight the number type that
matches your new entry, then press the OK key.
3. Enter a name for the new entry and press the
The new entry is saved to your Contacts list.
OK
key.
Add to an Existing Entry
1. Use the navigation keys to highlight Find, then press the
OK key.
2. Use the navigation keys to select the search method that
you wish to use (By Name, By Group, or By Entry).
Home
Office
Pager
Fax
Mobile
4. Use the navigation keys to highlight the desired number
type, then press the OK key. The Contacts entry
information appears in the display.
5. Press the OK key again to add the number to the
existing entry.
Section 6: Understanding Your Contacts
87
Section 6
3. Enter information to find the entry, or use the navigation
keys to highlight the desired entry, then press the OK
key. The following number types appear in the display:
Deleting a Contacts Entry
1. Find the Contacts entry you want to delete. See “Finding
a Contacts Entry” on page 75 for more information.
2. Use the navigation keys to highlight the desired entry.
3. Press the Option (left) soft key
options appear in the display:
䢇
䢇
䢇
. The following
Edit
Erase
Add New
4. Use the navigation keys to highlight Erase.
5. Press the OK key. The phone prompts you to confirm
the deletion.
6. Use the navigation keys to highlight Yes or No, then
press the OK key.
Section 6
Note: To delete all Contacts entries, see “Erase Memory” on page 194 for
more information.
Finding My Phone Number
My Phone# displays the ten-digit number assigned to
your phone by your wireless carrier.
䡲
In standby mode, press the MENU (left) soft key (
),
then press 1 (for Contacts), and press 4 for My
Phone#. The phone number assigned by your Wireless
Carrier appears in the display.
@
88
))
ghi
Memory
Memory
The Memory menu option lets you view the amount of
memory you have used to store Contacts entries, as
well as the memory remaining to store more Contacts
entries.
䡲
In standby mode, press the MENU (left) soft key (
),
then press 1 (for Contacts) and 5 jkl (for Memory).
The amount of memory used and remaining for Contacts
is displayed.
@
))
Section 6
Section 6: Understanding Your Contacts
89
90
Section 6
Section 7: @metro
Topics Covered
• Accessing @metro
With @metro, you can download full featured
applications over the air including games,
personalized ring tones, pictures, and more. You can
send and receive instant messages and email, or
browse the web to catch up on all the latest news.
This section outlines how to obtain games and other
applications for your phone. For more information,
contact your wireless provider.
Section 7
Section 7: @metro
91
Accessing @metro
Applications Shopping and Downloading
Download games, ring tones, e-mail, and more using
@metro. For information on airtime charges, contact
your Wireless Provider.
1. In standby mode, press the Right navigation key to
launch @metro. The following @metro options appear in
the display:
?
@metro
Settings
Help
2. Use the navigation keys to highlight the @metro icon
(
), then press the OK key.
Note: The first time you access @metro, an “airtime warning” message
appears in the display along with instructions on how to remove this
message.
Your phone takes a moment to connect, then the @metro
Catalog menu appears in the display.
3. Follow the instructions in your phone’s display.
Note: Please check with your Wireless Provider for availability of
applications.
Section 7
Changing Your @metro Settings
Use the Settings menu in @metro to manage, move,
order applications, and much more.
92
Accessing @metro
1. In standby mode, press the Right navigation key to
launch @metro.
2. At the @metro menu, use the navigation keys to
highlight the Settings icon ( ), then press the OK key.
The following options appear in the display:
䢇
䢇
䢇
䢇
䢇
Order Apps — Download applications over the network.
Move Apps — Move previously downloaded applications
between available folders.
Manage Apps — View used and available memory.
Main Menu View — Select whether you wish to view the
main @metro menu in a list or icon format.
View Log — View the @metro log, which displays
information about recent activity using @metro.
3. Use the navigation keys to highlight the desired option.
4. Press the OK key to enter the option’s sub menu and
view or change settings.
Using On-line Help
The Help sub menu within @metro is a short tutorial on
several @metro features. View information about
charges, cancelling subscriptions, buying apps,
disabling apps, and more.
1. Within in the @metro menu, use the navigation keys to
highlight the Help ( ? ) icon.
2. Press the OK key. The Help subjects described in the
following subsections appear in the display.
4. Press the
OK
key to view the selected Help information.
Section 7: @metro
93
Section 7
3. Use the navigation keys to highlight the desired Help
subject.
Buying New Apps
To buy new and exciting apps, visit @metro. It provides
you with a variety of apps you can choose from.
What do I pay?
When you buy an app, you will be charged for the
purchase cost of the app and the network connections
to download it. Charges will also apply when you use
apps that require network connections, such as
downloading information and sending text messages.
Demo Apps
A Demo app is free and is designed to demonstrate the
app’s main features. It usually expires after a certain
period of time or a number of uses and often has
limited functions. When you run a demo app, you will
be presented with a purchase option so you won’t have
to look for the app in @metro.
Removing Apps
You may remove apps that are no longer needed. When
you remove an app, you cannot use the application
unless you purchase it again. To remove an app, do the
following:
1. In the @metro screen, choose Settings, then choose
Manage Apps.
Section 7
2. Select the app you want to remove.
94
Accessing @metro
Disabled Apps
You can install new apps even if the memory of your
phone is full by partially removing (disabling) apps
you haven’t used recently. When you need to use a
disabled app, you can restore it at no additional
purchase cost.
Restoring Apps
Disabled apps can be quickly restored at no additional
purchase cost. To restore an app, run the application
you want to restore from the Main Menu. You will be
guided through the restoration process.
Expired Apps
Apps that were purchased based on the number of uses
or for a specified period of time expire. You can
purchase additional uses from @metro.
Section 7
Section 7: @metro
95
96
Section 7
Section 8: Messaging
Section 8
Topics Covered
• Types of Messages
• Create and Send Text Messages
• Receive Text Messages
• Send Picture Messages in Camera Mode
• Send Picture Messages in Standby Mode
• Handwritten Picture Messages
• Message Folders
• Message Settings
• Erase Messages
This section explains how to send or receive different
types of messages. This section also describes the
features and functionality associated with messaging.
Section 8: Messaging
97
Section 8
Types of Messages
Your phone is able to send and receive Text and Picture
messages to compatible phones and devices. Text
messages can be up to 160 characters in length.
Note: Available memory is shared between all messages. You can store up
to 50 incoming and 50 outgoing messages. However, the exact number is
dependent upon message length.
Create and Send Text Messages
1. In standby mode, press the Down navigation key, then
press 1 for New Text Msg. The Send To: screen
appears in the display.
@
))
2. Enter the phone number of the recipient, then press the
OK key.
3. Enter the text content of your message using the keypad.
See “Section 5: Entering Text” on page 63 for more
information.
At any point while composing a message, press the
Option (left) soft key (
). The following text entry
options appear in the display:
䢇
䢇
䢇
䢇
98
T9 Word — Recognizes commonly used words for the
numeric sequence of key presses and inserts the word into
your message.
ABC — Lets you enter characters while by pressing the keys
labeled with the desired characters (such as 4 ghi for “h”).
Symbol — Use Symbol mode to enter symbols, such as &, %,
and # into your message.
123 — Use 123 mode to enter numbers into your message.
Create and Send Text Messages
䢇
Canned — Insert a pre-composed message into the body of
your current message.
4. Once you’re finished entering your message, press the
OK key. The following New Message options appear in
the display:
䢇
䢇
䢇
䢇
䢇
Edit Send To — Edit the recipient’s Send To number.
Edit Text — Edit the content of your message.
Send Options — Choose the Priority, Validity, whether you
wish to have a Delivery Acknowledgement, Insert a Signature
and Call Back #, and whether you wish to Defer Delivery of the
message to some particular time.
Save in Draft — Save the message to your Draft folder.
Save Text — Save the text in your message as a Canned
Message. Canned Messages are pre-composed messages
that you can insert into any message you choose.
5. To send your message, press the Send (left) soft key
(
).
Send Options
You can set priority, validity, and other options before
you send a message.
1. After you’ve composed a message and pressed the
key, you’re returned to the New Message menu.
OK
2. Use the navigation keys to highlight Send Options, then
press the OK key. The following send options appear in
the display:
䢇
Priority — Normal/Urgent — Assign a priority to your
message.
Section 8: Messaging
99
Section 8
Use the Up and Down navigation keys to highlight the
desired option, then press the OK key.
Section 8
䢇
䢇
䢇
䢇
䢇
Validity — None/30 Min/1–2 Hours/12 Hours/1–3 Days/5
Days — Select the period of time that you wish the message to
be available to the recipient. After the set period of time, your
message is recalled.
Insert Sign. — Off/On — Insert your pre-composed
signature into the message.
Delivery Ack — Off/On — Request confirmation for when
your message is received.
Call Back # — Yes/No/Edit — Insert a number into your
message for the recipient to call you back.
Def. Delivery — Immediate/Set Time — Choose when you
wish your message to be sent.
3. Use the navigation keys to highlight the desired send
option and press the OK key to confirm the selection or
to enter the send option’s sub menu.
Receive Text Messages
When you receive a message in standby mode, the
ringer sounds, (unless turned off), and New Message
appears in the display along with the closed envelope
icon ( ). The date and time of the message also appear
in the display:
• Press the Ignore (left) soft key (
) to return your phone to
standby mode. The message is saved to your inbox where you
can view it later.
• Press the View (right) soft key (
) to open the message,
where you have the option to Reply, Forward, Delete, Save Text,
or Save Msg.
100
Send Picture Messages in Camera Mode
Receive Messages While in a Call
1. Press the Ignore (left) soft key (
) to ignore the
message and save it to your inbox where you can view it
later.
2. Press the View (right) soft key ( ) to open the
message, your call remains connected.
Send Picture Messages in Camera Mode
Picture messages can be sent to recipients with
compatible phones or devices. You can even
accompany a Picture message with a voice memo or
preloaded sound.
Tip: You can send a Picture message to up to ten recipients. Separate each
recipient’s address or phone number with a comma in the Send to field of
the Picture message composer.
1. In standby mode, press a Camera key:
䢇
䢇
(on the right side of the phone)
(on the keypad)
The Camera menu appears in the display with Take a
Picture highlighted.
2. Press the
OK
key. The camera activates.
3. Using the display as a viewfinder, press the OK key
when the image that you wish to send appears in the
display.
Section 8: Messaging
101
Section 8
When you receive a message while in a call, New
Message appears in the display along with the closed
envelope icon ( ). To view the message without
disconnecting the call:
Section 8
Note: For more information about using the camera feature in your phone,
see “Section 11: Camera” on page 129.
4. Press the OK key. The New Pic Message screen
appears in the display with the Send to field highlighted
and the picture that you just snapped showing in the
Picture field.
5. Enter the phone number or e-mail address of the
recipient of the Picture message.
Tip: Press the left soft key ( ) Option to display a pop-up menu that
allows you to search your Contacts for a recipient, insert symbols and
letters, or save an address you enter to the Contacts list.
6. Press the Down navigation key to move the cursor to the
Subject field, then enter a subject for the Picture
message using the keypad.
7. Press the Down navigation key until the Message field is
highlighted, then enter the message text using the
keypad.
See “Section 5: Entering Text” on page 63 for more
information.
8. If you wish to insert a sound into your Picture message,
follow the instructions in steps 9 through 11. Otherwise,
proceed to step 12.
9. Press the Option (left) soft key (
options appear in the display:
䢇
䢇
102
Sounds
Erase
). The following
Send Picture Messages in Camera Mode
䢇
䢇
Record New — Record a new memo to insert into the
message.
Melody1 – Melody10 — Select from a list of audio files
preloaded on your phone.
Note: You can record and insert a voice memo of up to 60 seconds in
length, if you record first before attaching a picture. If a picture is attached
before recording, the size of the voice memo is limited to the amount of
remaining memory.
11. Use the Up/Down navigation keys to highlight an option,
then press the OK key to enter the option’s sub menu
and insert a sound into your message. Press
to
exit the pop-up menu without inserting a sound.
CLR
12. To preview the Picture message before sending,
), then select Preview
press the Next (right) soft key (
from the list of options that appears in the display.
䢇
Press the SEND key ( OK ) to send the message. Pic. Msg
Sending appears in the display and a progress bar indicates
the send status.
13. To send the Picture message now, press the SEND key
( OK ). Pic. Msg Sending appears in the display and a
progress bar indicates the send status.
Section 8: Messaging
103
Section 8
10. Use the Up/Down navigation keys to highlight Sounds,
then press the OK key. The following options appear in
the display:
Section 8
Send Picture Messages in Standby Mode
Send Picture messages to recipients with a compatible
phone or other device, and accompany the Picture
message with a voice memo, ring tone, or downloaded
melody.
Note: You can send a Picture message to up to ten recipients. Separate
each recipient’s address or phone number with a comma in the Send to
field of the Picture message composer.
1. In standby mode, press the Down navigation key, then
press 2 abc for New Pic. Msg. The New Pic. Message
screen appears in the display with the Send to field
highlighted.
2. Enter the phone number or e-mail address of the
recipient using the keypad.
Tip: Press the Option (left) soft key ( ) to display a pop-up menu that
allows you to search your Contacts for a recipient, insert symbols and
letters, or save an address you enter to the Contacts list.
3. Press the Down navigation key to move the cursor to the
Subject field. Enter a subject for the Picture message
using the keypad.
4. Press the Down navigation key until the No Photo image
is highlighted. The No Photo image resembles a film
slide.
5. Press the Option (left) soft key (
options appear in the display:
䢇
104
). The following
Photo Gallery — Select from a list of pictures that you have
taken to insert into your Picture message.
Send Picture Messages in Standby Mode
䢇
6. Use the Up/Down navigation keys to highlight an option,
then press the OK key to enter the option’s sub menu
and insert a photo or image into your picture message.
7. Once you’ve inserted the photo or image into your
message, use the navigation keys to highlight the
Message field.
8. Enter the message text using the keypad.
See “Section 5: Entering Text” on page 63 for more
information.
9. If you wish to insert a sound into your Picture message,
follow the instructions in steps 10 through 12.
Otherwise, proceed to step 13.
10. Press the Option (left) soft key (
options appear in the display:
䢇
䢇
). The following
Sounds
Erase
11. Use the Up/Down navigation keys to highlight Sounds,
then press the OK key. The following options appear in
the display:
䢇
䢇
Record New — Record a new memo to insert into the
message.
Melody1 – Melody10 — Select from a list of downloaded
audio files.
Section 8: Messaging
105
Section 8
䢇
Image Gallery — Select from a list of downloaded pictures
into your Picture message.
Erase — Delete any images that you have attached to your
Picture message.
Section 8
Note: You can record and insert a voice memo of up to 60 seconds in
length, if you record first before attaching a picture. If a picture is attached
before recording, the size of the voice memo is limited to the amount of
remaining memory.
12. Use the Up/Down navigation keys to highlight an option,
then press the OK key to enter the option’s sub menu
and insert a sound into your message.
13. You can now send or preview the Picture message.
14. To preview the Picture message before sending,
press the Next (right) soft key ( ), then select Preview
from the selection list that appears in the display.
䢇
Press the SEND key ( OK ) to send the message. Pic. Msg
Sending appears in the display and a progress bar indicates
the send status.
15. To send the Picture message now, press the SEND key
( OK ). Pic. Msg Sending appears in the display and a
progress bar indicates the send status.
Receive Picture Messages
1. When you receive a new Picture message, the phone
number (or email address) from which the message was
sent, and Pic. Msg Retrieving... appears in the display.
A progress bar indicates retrieval status.
2.
After the Picture message has downloaded, an alert
sounds. Ignore and View also appear in the display.
3. Press the Ignore (left) soft key (
) to view the Picture
message later. Press the View (right) soft key ( ) to
view the Picture message now.
106
Handwritten Picture Messages
View a Picture Message Later
2. Press the Ignore (left) soft key (
message is sent to your Inbox.
). The Picture
3. In standby mode, press the MENU (left) soft key (
),
then press 3def (for Messages), 4 (for Inbox) to open
your Inbox and view the picture message.
ghi
For more information on viewing your Inbox messages,
see “Inbox” on page 108.
Handwritten Picture Messages
New Handwr. Msg lets you quickly send handwritten
messages as pictures, rather than using the keypad to
enter your message.
1. In standby mode, press the Down navigation key, then
press 3def for New Handwr. Msg. The camera screen
appears in the display in Sketch mode (that is, high
contrast).
2. Position your handset so that the complete text of the
message appears within the image corners. See “Simple
Snap Shot” on page 130 for more information.
Tip: For best results, write your message on white or light-colored, unruled
paper (that is, no lines).
3. Use the Left and Right navigation keys to increase
magnification of (“zoom in on”) the message, as needed.
Section 8: Messaging
107
Section 8
1. Once a Picture message has been downloaded to your
phone, the Ignore (left) soft key (
) and View (right)
soft key ( ) and appear in the display.
Section 8
4. Press the OK key. “Digitizing...” appears in the
display, followed by a high-contrast picture of your
message.
5. If you are satisfied with the picture of your message,
press the OK key. The Picture Message screen
appears in the display with your picture automatically
included.
6. Complete and send your new Pic. message. See “Send
Picture Messages in Standby Mode” on page 104 for
more information.
Message Folders
Your phone stores messages in any one of five folders.
The subsections that follow describe each message
folder in detail.
Inbox
Received messages of all types (except Voice Mail) are
stored in the Inbox folder.
1. In standby mode, press the Down navigation key, then
press 4 for Inbox. A list of incoming messages
appears in the display.
ghi
Tip: Press the MSG (right) soft key (
Message menu.
) while in a call to open the
2. Use the navigation keys to highlight the message that
you wish to view.
3. Press the
message.
108
OK
key to view contents of the highlighted
Message Folders
4. While viewing your message press the Option (left) soft
key (
). The following options appear in the display:
䢇
䢇
䢇
䢇
Reply — Compose and send a message to the originator of
the received message.
Lock/Unlock — Block a message from being erased or free
a message to be erased.
Erase — Delete the message and its contents.
Forward — Send a copy of the message to another
recipient.
Save Contact — Save the sender’s number to your Contacts.
5. Use the navigation keys to highlight an option. Press the
OK key to perform the function for the highlighted
option.
Outbox
Your phone stores messages in the Outbox, regardless
of whether the message was successfully transmitted.
Verify if and when a message or e-mail was successfully
transmitted by enabling the Delivery Ack feature. See
“Send Options” on page 99 for more information on
delivery acknowledgements.
Review Messages in the Outbox
1. In standby mode, press In standby mode, press the
Down navigation key, then press 5 jkl for Outbox. Your
list of sent messages appear in the display.
2. Use the navigation keys to highlight the message that
you wish to review, then press the OK key.
Section 8: Messaging
109
Section 8
䢇
3. Press the Option (left) soft key (
options appear in the display:
Section 8
䢇
䢇
䢇
䢇
). The following
Resend — Re-send the message. The New Message menu
appears in the display.
Lock/Unlock — Block a message from being erased or free
a message to be erased.
Erase — Delete the message.
Message Info — Display message delivery status,
addressee, size, and so on (for picture messages only).
4. Use the navigation keys to highlight the desired option.
5. Press the OK key to perform the function for the
highlighted option.
Messages and Lock Mode
Your phone can still receive messages while in Lock
Mode. The time and date of the message appear in the
display, but you cannot access the message until you
enter the lock code.
Draft Box
Messages in the Draft Box are those that have been
composed but never sent. You can return to the Draft
Box at any time to view, edit, or send a draft message.
Create a Draft Message
1. In standby mode, press the Down navigation key, then
press 1 for New Text Msg, or 2 abc for New Pic Msg.
@
))
2. Enter the phone number of the recipient, then press the
OK key.
3. Compose your message using the keypad, then press
press the OK key.
110
Message Folders
View and Edit Draft Text Messages
1. In standby mode, press the Down navigation key, then
press 6 for Draft Box. A list of any draft messages
that you’ve composed appears in the display.
mno
2. Use the navigation keys to highlight the text message
that you wish to view, then press the Edit key ( OK ). The
message text edit screen appears in the display.
3. After you complete your changes to the selected draft
message, press the OK key. The following options
appear in the display:
䢇
䢇
䢇
䢇
䢇
Edit Send To — Edit the phone number of the recipient.
Edit Text — Edit, format, or add media and pre-composed
text to the message.
Send Options — Select the priority, validity, delivery
acknowledgement, insert signature, callback #, deferred
delivery options.
Save in Draft — Continue to save the message to the Draft
Box.
Save Text — Save only the text in the message, if media or
other content is contained within the message.
4. Use the navigation keys to highlight an option. Press the
OK key to perform the function for the highlighted
option.
View and Edit Draft Pic. Messages
1. In standby mode, press the Down navigation key, then
press 6 for Draft Box. A list of any draft messages
that you’ve composed appears in the display.
mno
Section 8: Messaging
111
Section 8
4. Use the navigation keys to highlight Save in Draft, then
press the OK key. A confirmation message appears in
the display and your message is saved to the Draft Box.
Section 8
2. Use the navigation keys to highlight the picture message
that you wish to view, then press the Edit ( OK ) key. The
message edit screen appears in the display.
3. Make any needed changes and press the Next (right)
soft key ( ). The following options appear in the
display:
䢇
䢇
䢇
Preview — Shows the message contents.
Send Options — Select the priority, validity, delivery
acknowledgement, deferred delivery options.
Save in Draft — Saves the changed message to the Draft
Box.
4. Use the navigation keys to highlight an option. Press the
OK key to perform the function for the highlighted
option.
Edit Text Options
1. While editing the text of a draft message, press the
Option (left) soft key (
). The following options appear
in the display:
䢇
䢇
䢇
䢇
䢇
112
T9 Word — Recognizes commonly used words for the
numeric sequence of key presses and inserts the word into
your message.
ABC — Text entry mode. Lets you enter characters while by
pressing the keys labeled with the desired characters (such as
4 ghi for “h”). Use the Left and Right navigation keys to
change the text entry mode to one of the following:
Symbol — Use Symbol mode to enter symbols, such as &, %,
and # into your message.
123 — Use 123 mode to enter numbers into your message.
Canned — Insert a pre-composed message into the body of
your current message.
Message Settings
Voice Mail
Messages in your voice mailbox are logged in the Voice
Mail folder of the Message menu. Open the Voice Mail
folder to view the Callback # (if available), Urgency,
and other details of the voice mail message.
1. In standby mode, press the Down navigation key, then
press 7pqrs for Voice Mail.
2. Use the navigation keys to highlight the message that
you wish to view.
3. Press the
message.
OK
key to view contents of the highlighted
4. Press the send key ( SEND ) SEND:Listen to call your voice
mailbox and listen to the message.
Note: You can also press and hold 1@ to dial your voice mailbox.
))
Message Settings
Use the Msg Setting menu to define settings for
picture, text, and general messages.
1. In standby mode, press the Down navigation key, then
press 8 for Msg Setting. The Msg Setting menu
appears in the display.
tuv
2. Use the navigation keys to highlight Text, Pic. Msg, or
General.
Section 8: Messaging
113
Section 8
2. Use the navigation keys to highlight an option. Press the
OK key to perform the function for the highlighted
option.
Section 8
3. Use the instructions in the following subsections to
change settings for Text, Pic. Msg, and General
messages.
Text Message Settings
1. With Text highlighted in the Msg Setting sub menu,
press the OK key. The following text message options
appear in the display:
䢇
䢇
䢇
䢇
䢇
䢇
䢇
Save In Outbox — Options to save messages automatically
in the Outbox (Auto Save), Prompt before saving, or do Not
Save messages to the Outbox.
Insert Sign. — Insert a signature into each outgoing
message.
Delivery Ack — Yes/No — Choose to be notified of whether
or not your messages have been delivered.
Direct View — Off/On — With Direct View On, the full
content of text messages appear in the display as they are
received.
Signature — Create a signature, which can be attached at
the bottom of outgoing messages (see Insert Sign. above).
Callback# — Edit the callback# for all of your messages.
Block Address — Block or Unblock the reception of text
messages from a specific number, or view the list of blocked
addresses.
2. Use the navigation keys to highlight the desired setting.
Press the OK key to enter the highlighted option’s sub
menu.
Picture Message Settings
1. With Pic. Msg highlighted in the Msg Setting sub menu,
press the OK key. The following options appear in the
display:
114
Message Settings
䢇
䢇
2. Use the navigation keys to highlight the desired setting.
Press the OK key to enter the highlighted option’s sub
menu.
General Message Settings
1. With General highlighted in the Msg Setting sub menu,
press the OK key. The following options appear in the
display:
䢇
䢇
䢇
䢇
䢇
Entry Mode — Choose the default method for entering text
into messages. Options are T9 Word and Alphabet.
Canned Msg. — Edit your pre-composed messages, which
can then be inserted into new messages.
Msg. Alert — Choose the volume level (or vibrate) when
alerted of a message. Choose the alert message type, and
frequency of alerts.
Auto Delete — Choose to receive (or not receive) a warning
message when you delete a message.
Voice Mail # — Edit or view your Voice Mail number.
2. Use the navigation keys to highlight the desired setting.
Press the OK key to enter the highlighted option’s sub
menu.
Section 8: Messaging
115
Section 8
䢇
Save in Outbox — Options to save messages automatically
in the Outbox, prompt before saving, or do not save messages
in the Outbox.
Delivery Ack — Choose to be notified of whether or not your
messages have been delivered.
Retrieval Mode — Choose Automatic to download and
display Picture messages as they are received. Choose
Prompt to be notified beforehand.
Editing and Entering Canned Message Text
1. In standby mode, press the Down navigation key, then
press 8 (for Msg Setting), 3def (for General), and
2 abc for Canned Msg. The Canned Msg. menu appears
in the display.
Section 8
tuv
2. Use the navigation keys and the PgDn (left) soft key
(
) to highlight the Canned Msg. text you want to
change or enter.
3. Enter the text content of your Canned Msg. using the
keypad. See “Section 5: Entering Text” on page 63 for
more information.
At any point while composing a Canned Msg., press the
Option (left) soft key ( ). The following options appear
in the display:
䢇
䢇
䢇
䢇
T9 Word — Recognizes commonly used words for the
numeric sequence of key presses and inserts the word into
your message.
ABC — Text entry mode. Lets you enter characters while by
pressing the keys labeled with the desired characters (such as
4 ghi for “h”).
Symbol — Use Symbol mode to enter symbols, such as &, %,
and # into your message.
123 — Use 123 mode to enter numbers into your message.
4. Once you’re finished entering your Canned Msg., press
the OK key. The Canned Msg. menu appears in the
display with your new Canned Msg. highlighted.
Tip: You can also create new Canned Msg. text by using the Save Text
option in the New Message menu. See “Create and Send Text Messages”
on page 98 for more information.
116
Erase Messages
Erase Messages
Note: This function erases all messages in the selected folder. To delete a
single message, open the folder from the Message menu, then delete the
message from the Option menu while viewing the message content.
1. In standby mode, press the Down navigation key, then
press 9wxyz for Erase Msg. The following options appear
in the display:
䢇
䢇
䢇
䢇
䢇
Voice — Deletes all Voice Mailbox log entries.
In Box — Deletes all messages stored in the Inbox.
Out Box — Deletes all messages stored in the Outbox.
Draft — Deletes all messages stored in the Draft folder.
All Messages — Deletes all messages stored in all of the
message folders.
2. Use the navigation keys to highlight the folder containing
the messages that you wish to delete.
3. Press the OK key. You’re prompted to confirm the
erasure of all messages in the selected folder or in all
folders.
4. Use the navigation keys to highlight Yes or No, then
press the OK key.
Section 8: Messaging
117
Section 8
You can erase all of the messages in each your folders
from one convenient location.
118
Section 8
Section 9: Mobile Web
Topics Covered
• Mobile Web
• Launching Mobile Web
• Using Mobile Web
Section 9
• Using Links
• How Mobile Web Keys Work
This section outlines how to launch Mobile Web,
how to navigate to other pages on the web, and how
the keys on the keypad are used with the web
application. Additionally, links to other sites are
briefly discussed.
Section 9: Mobile Web
119
Mobile Web
With Mobile Web, you can conveniently surf the web
and download ringtones and wallpapers using your
phone. Each time you launch Mobile Web, your phone
connects to the Internet and the service indicator icon
( ) appears in the display.
Section 9
Stored Web Content
Mobile Web ends an Internet connection after a certain
period of inactivity, however some information from
your session remains stored in the phone (if you leave
your phone turned on). You can access this information
without reconnecting to the Internet. However, if you
are viewing stored information, and you select a link to
a site that was not accessed in your last session, you
automatically re-connect to the Internet.
Launching Mobile Web
1. In standby mode, do one of the following to launch
Mobile Web:
䢇
䢇
Press the Left navigation key.
Press the Menu (left) soft key (
), then press 4 ghi (for
Mobile Web) and 1@ for Get In Web.
))
2. A list of categories (each representing one or more web
sites) appears in the display.
3. Use the navigation keys to browse the categories.
4. Once the desired category is highlighted, press the
(left) soft key ( ) to enter the category list.
120
Using Mobile Web
Exit Mobile Web
䡵
Press
END
to exit Mobile Web.
Using Mobile Web
When you use Mobile Web, some of the keys operate
differently than during a normal phone call. Mobile
Web presents on-screen items in any of the following
ways:
Section 9
• Text or numeric input.
• Links (embedded in content).
• Numbered options (some may not be numbered).
• Simple text.
You can act upon options or links by using the soft
keys.
Mobile Web soft keys
the bottom of the Mobile Web display is a bar that
contains browser commands. The left and right (
) soft keys on the keypad are used to execute the
command that appears above them in the display.
These are called “soft keys” because their function
changes depending on the application.
Using Links
Links have several purposes, such as jumping to a
different page, to a different site, or even initiating a
phone call. Links are shown inside of brackets ([ ]).
You can normally use the left soft key (
) to select a
link when it is highlighted.
Section 9: Mobile Web
121
How Mobile Web Keys Work
The following table lists Mobile Web keys and their
functions.
OK @
CLR
navigation keys — Use to browse lists and options
CLR Key — A browse, back-up key. Press once to back
up one page. Press and hold to go back to home page.
Press to clear the last number, letter, or symbol entered.
Press and hold to completely clear the display.
Section 9
Asterisk/Shift Key — Press before entering text to
enable uppercase characters.
Next Key — Press to enter a zero (0), or to display
another word in the dictionary when in T9 Word entry
mode.
0
Pound/Space Key — Press to insert a space when
entering text.
#
1@
9
))
wxyz
END
Number 1 thru 9 — Use the number keys to select
items in a menu if they are numbered.
End Key — Press to exit the Mobile Web and return the
phone to standby mode.
Left Soft Key — Press to activate the command that
appears above it in the display.
Right Soft Key — Press to activate the command that
appears above it in the display.
122
Section 10: Gallery
Topics Covered
• Accessing Your Gallery
• Using Image Gallery
• Using Melody Gallery
• Using Animelody Gallery
With @metro, you can download full featured
applications over the air including games,
personalized ring tones, pictures, and more. You can
send and receive instant messages and email, or
browse the web to catch up on all the latest news.
Section 10: Gallery
123
Section 10
This section outlines how to obtain games and other
applications for your phone. For more information,
contact your wireless provider.
Accessing Your Gallery
1. In standby mode, press the left soft key (
) MENU,
then press 6 for Gallery. The following Gallery submenus appear in the display:
mno
䢇
䢇
䢇
Image Gallery — Lets you choose the multi-media or
pictures that appear in your phone’s display.
Melody Gallery — Lets you assign melody tones for calls,
alarms, and other alerts.
Animelody Gallery — Lets you assign animated melody
tones for calls, alarms and calendar.
2. Use the navigation keys to highlight a sub-menu.
3. Press OK to enter the highlighted sub-menu. The
following sections describe the above listed sub-menus
in greater detail.
Section 10
Using Image Gallery
Image Gallery lets you choose the multi-media files or
the pictures that appear in your phone’s display when
you turn it on or off, while in standby mode
(wallpaper), and as image IDs for your contacts.
1. In standby mode, press the left soft key (
) MENU,
then press 6 (for Gallery) and 1 for Image Gallery.
mno
@
))
2. Use the navigation keys to select Preloaded or
Downloaded (if you have downloaded images), then
press the OK key.
3. Use the navigation keys to highlight an image or
animation.
124
Using Image Gallery
4. Press the Option (left) soft key (
options appear in the display:
䢇
䢇
). The following
Assign — Lets you assign selected images, melodies, and
animelodies as Wallpaper, Opening, Closing, and
Contacts.
Image Info — Displays information about the highlighted
image, such as the title (name), and the data size.
5. Use the navigation keys to highlight Assign, then press
the OK key.
The following options appear in the display:
䢇
䢇
䢇
䢇
Wallpaper — Choose the graphic or animation that appears
in your display when the phone is in standby mode.
Opening — Choose the animation that appears in your
display when you turn on your phone.
Closing — Choose the animation that appears in you display
when you turn off your phone.
Contacts — Choose the graphic or animation that appears in
the display when selected contacts calls.
When using a downloaded image, the following options
appear in the display:
䢇
䢇
䢇
䢇
䢇
䢇
Assign — Use to assign the selected image.
Rename — Lets you rename the image.
Lock — Lets you protect the image from being deleted.
Erase — Erases a selected file.
Erase All — Erases all files.
File Info — Displays information about the image, such as the
file name, creation time and date, and the data size.
Section 10: Gallery
125
Section 10
6. Use the navigation keys to highlight an option, then
press the OK key.
7. Press the Back (right) soft key ( ) to return to the
previous menu, or press the
key to return to standby
mode.
END
Using Melody Gallery
Melody Gallery lets you assign ringer types and
melody tones for calls, alarms, and other alerts.
1. In standby mode, press the left soft key (
) MENU,
then press 6 (for Gallery) and 2 abc for Melody
Gallery.
mno
2. Use the navigation keys to select Preloaded or
Downloaded (if you have downloaded melodies), then
press the OK key.
3. A list of bells and melodies appears in the display.
4. Press the Option (left) soft key (
).
When using a preloaded melody, a pop-up menu
containing the following option appears in the display:
Section 10
䢇
Assign — Lets you assign selected melodies to Calls, an
Alarm, Data calls, and Calendar events.
When using a downloaded melody, the following options
appear in the display:
䢇
䢇
䢇
䢇
䢇
䢇
126
Assign — Use to assign the selected melody to Calls, an
Alarm, Data calls, and Calendar events.
Rename — Lets you rename the melody.
Lock — Lets you protect files from being deleted.
Erase — Erases a selected file.
Erase All — Erases all files.
File Info — Displays information about the melody, such as
the file name, creation time and date, and the data size.
Using Animelody Gallery
5. Use the navigation keys to highlight Assign, then press
the OK key. The following options appear in the display:
䢇
䢇
䢇
䢇
Calls — Lets you assign a melody tone to incoming voice
calls.
Alarm — Lets you assign melody tones for alarms.
Data — Lets you assign melody tones for incoming data calls.
Calendar — Lets you assign a melody tone as a calendar
reminder.
If Alarm is selected additional options appear in the
display. Proceed to Step 6.
䢇
䢇
䢇
Alarm 1
Alarm 2
Alarm 3
6. Use the navigation keys to highlight an option and press
the OK key.
7. Press the Back (right) soft key ( ) to return to the
previous menu, or press the
key to return to
standby mode.
END
Section 10
Using Animelody Gallery
1. In standby mode, press the left soft key (
) MENU,
then press 6 (for Gallery) and 3def for Animelody
Gallery. A list of available animelodies appears in the
display.
mno
Section 10: Gallery
127
2. Use the navigation keys to highlight an animelody, then
press the Option (left) soft key (
). The following
options appear in the display:
䢇
䢇
䢇
䢇
䢇
Assign — Use to assign a selected animelody to incoming
Calls, an Alarm, Data calls, and Calendar events.
Rename — Lets you rename the animelody.
Lock — Lets you protect files from being deleted.
Erase — Lets you erase a selected file.
File Info — Displays information about the animelody, such as
the file name, creation time and date, and the data size.
3. Use the navigation keys to highlight Assign, then press
the OK key. The following options appear in the display:
䢇
䢇
Calls — Lets you assign an animelody to incoming calls.
Alarm — Lets you assign an animelody to an alarm.
4. If you select Alarm, the following options appear in the
display. Proceed to Step 5.
䢇
Section 10
䢇
䢇
Alarm 1
Alarm 2
Alarm 3
5. Use the navigation keys to highlight an Alarm option,
then press the OK key.
6. Press the Back (right) soft key ( ) to return to the
previous menu, or press the
key to return to standby
mode.
END
128
Section 11: Camera
Topics Covered
• Taking Pictures
• Saving Pictures
• The Picture Gallery
• Camera Settings
• Point, Click, and Send a Picture
Use your SCH-a850 phone to take full color digital
pictures, display them on your phone’s vivid color
display, and instantly share them with family and
friends. It’s fun, and as easy to use as a traditional
point-and-click camera. Depending on the resolution
you choose, you can save dozens of pictures in your
phone’s memory.
This section explains how you can do the following:
• Take pictures with your phone’s built-in digital camera.
• Send and receive pictures taken with your phone’s camera.
• Set the several options associated with the camera that help
Section 11
you take crisp, clear pictures.
Section 11: Camera
129
Taking Pictures
Taking pictures with the built-in camera is as simple as
choosing a subject, pointing the lens [located on the
outside of the folder (above the external display)], and
pressing a button.
Simple Snap Shot
To take a single picture using the current camera
settings, do the following:
1. In standby mode, press and hold a camera key:
䢇
䢇
(on the keypad)
(on the right side of the phone)
The message “Camera Starting...” followed by a
camera view finder screen appears in the display. (See
“Camera Screen” on page 131 for more information.)
Note: You can also activate the camera by pressing the MENU (left) soft
key(
), then press 7 (for Camera) and 1 for Take a Picture.
pqrs
@
))
2. Point the camera at your subject.
Section 11
3. Using the display as a viewfinder, press the OK key
when the image that you wish to capture appears in the
display.
4. Press the Save (right) soft key (
to memory.
) to save the picture
5. Press the Cancel (left) soft key (
) to erase the photo.
Tip: You can change a number of the camera’s settings to suit particular
uses for your pictures. See “Camera Settings” on page 142 for more
information.
130
Taking Pictures
Camera Screen
When you activate your
phone’s camera, the second line
of the display is reserved for the
current camera resolution
setting and the picture counter.
The center of the display shows
a viewfinder image of the
subject at which the camera is
pointed. The soft key labels on
the bottom line of the display
change to the following:
• Option — Pressing the left soft key (
) opens a pop-up
menu of camera settings.
• OK — Pressing the
OK key takes a picture of the image
currently appearing on the display.
• Gallery — Pressing the right soft key (
) opens the Picture
Gallery so you can view or manage your stored pictures.
Camera Screen Icons
Camera Resolution — Indicates that you can use the Up
and Down navigation keys to temporarily adjust the
camera’s resolution setting. (You can also change the
default camera resolution setting. See “Camera Settings”
on page 142 for more information.)
Self Timer in use — Delays the camera shutter from 5 to
) or
Multi Shot in use — Takes multiple pictures after you
press a Camera key (
) or the OK key. The
number of pictures taken depends upon the resolution
setting.
Section 11: Camera
131
Section 11
10 seconds after you press a Camera key (
the OK key.
Camera — Indicates that pressing the OK key takes a
picture of the image currently appearing on the display.
Camera Options
The Camera Options let you temporarily override your
default camera settings. Any settings you change using
the Camera Options only apply to the current camera
session or until you make another change using the
Camera Options. When you exit camera mode, all
camera settings return to default values.
Delay Pictures with the Self Timer
Self Timer lets you delay a picture long enough so you
or the person taking the picture can join others in the
picture.
1. In camera mode, press the Option (left) soft key (
The following options appear in the display:
䢇
䢇
䢇
䢇
䢇
䢇
).
Self Timer
Multi Shot
Brightness
Fun Frame
Color Tones
White Balance
Section 11
Note: Color Tone and White BalanceTone are not initially visible in the
pop-up menu. Use the navigation keys to scroll down and view these menu
items.
2. Use the navigation keys to highlight Self Timer, then
press the OK key. The following options appear in the
display:
䢇
132
Off
Taking Pictures
䢇
䢇
5 sec
10 sec
3. Use the navigation keys to highlight the desired delay,
then press the OK key. The camera screen appears in
the display.
The next time you press a Camera key (
) or
the OK key, a countdown timer appears in the display
that indicates the time remaining before the camera
takes the picture.
Multi Shot
Multi Shot lets you take multiple pictures in succession
at the touch of a button. The number of pictures you
can take depends on the resolution setting, as indicated
in the following list:
• High resolution — 3 pictures
• Medium resolution — 5 pictures
• Low resolution — 7pictures
See “Change Picture Brightness” on page 142 for more
information.
1. In camera mode, press the Option (left) soft key (
The following options appear in the display:
䢇
䢇
䢇
䢇
䢇
Self Timer
Multi Shot
Brightness
Fun Frame
Color Tones
White Balance
Section 11
䢇
).
Section 11: Camera
133
Note: Color Tone and White Balance are not initially visible in the pop-up
menu. Use the navigation keys to scroll down and view these menu items.
2. Use the navigation keys to highlight Multi Shot, then
press the OK key. Off and On appear in the display.
3. Use the navigation keys to highlight On, then press the
OK key. The camera screen appears in the display.
Note: When Multi Shot is set to On, the multi shot icon (
display in camera mode.
) appears in the
The next time you press a Camera key (
) or
the OK key, the camera takes several pictures in rapid
succession.
Brightness
Change the brightness of your pictures using the
Brightness setting. Options are +5 – -5.
1. In standby mode, press the MENU (left) soft key (
),
then press 7pqrs (for Camera), 3def (for Settings), and
1 for Brightness. The following options appear in the
display:
@
䢇
䢇
䢇
䢇
Section 11
䢇
䢇
䢇
䢇
䢇
134
))
+5
+4
+3
+2
+1
0
-1
-2
-3
Taking Pictures
䢇
䢇
-4
-5
2. Use the navigation keys to highlight the desired
brightness and press the OK key. You’re returned to the
Settings menu.
Note: -1 – -5 are not initially visible in the display. Use the navigation keys
to scroll down and view these menu items.
Fun Frame
Fun Frame lets you temporarily apply one of the
preloaded picture frames in your phone to characterize
or enhance one or more pictures.
Note: The Normal frame is a blank frame.
1. In camera mode, press the Option (left) soft key (
The following options appear in the display:
䢇
䢇
䢇
䢇
䢇
䢇
).
Self Timer
Multi Shot
Brightness
Fun Frame
Color Tones
White Balance
Note: Color Tone and White Balance are not initially visible in the pop-up
menu. Use the navigation keys to scroll down and view these menu items.
Section 11: Camera
135
Section 11
2. Use the navigation keys to highlight Fun Frame, then
press the OK key. The name of the current frame
appears in the second line of the display.
3. Use the Left and Right navigation keys to show the
various Fun Frames.
4. When you decide on the frame you wish to use, press the
Select (left) soft key (
) or the OK key. The camera
screen appears in the display with your selected Fun
Frame in place.
The next time you press a Camera key (
) or
the OK key, the camera include the selected Fun Frame
in your picture.
Color Tones
Color Tones lets you temporarily apply one of the
following color-based special affects to one or more
pictures:
• Normal — No special affect.
• Sepia — Replaces all colors with shades of sepia.
• Monochrome — Replaces all colors with shades of grey.
• Negative — Reverses light and dark shades of grey.
• Emboss — Creates a three-dimensional affect in the
Monochrome picture.
• Sketch — Reduces the picture to outlines.
Note: The Normal Color Tone leaves the picture unchanged.
Section 11
1. In camera mode, press the Option (left) soft key (
The following options appear in the display:
䢇
䢇
䢇
䢇
136
Self Timer
Multi Shot
Brightness
Fun Frame
).
Taking Pictures
䢇
䢇
Color Tones
White Balance
Note: Color Tone and White Balance are not initially visible in the pop-up
menu. Use the navigation keys to scroll down and view these menu items.
2. Use the navigation keys to highlight Color Tone, then
press the OK key. The name of the current Color Tone
appears in the second line of the display.
3. Use the Left and Right navigation keys to show the
various Color Tones and the effects they have on a
picture.
4. When you decide on the Color Tone you wish to use,
press the Select (left) soft key (
) or the OK key. The
camera screen appears in the display with your selected
Color Tone applied.
The next time you press a Camera key (
) or
the OK key, the camera applies the selected Color Tone
to your picture.
White Balance
White Balance allows you to adjust picture quality
according to available light.
1. In camera mode, press the Option (left) soft key (
The following options appear in the display:
䢇
䢇
䢇
䢇
䢇
Self Timer
Multi Shot
Brightness
Fun Frame
Color Tones
White Balance
Section 11
䢇
).
Section 11: Camera
137
Note: Color Tone and White Balance are not initially visible in the pop-up
menu. Use the navigation keys to scroll down and view these menu items.
2. Use the navigation keys to highlight White Balance, then
press the OK key. The following White Balance options
appear in the display:
䢇
䢇
䢇
䢇
䢇
Auto — The camera automatically adjusts picture quality to
available light.
Sunny — Use this setting when taking pictures in full sun.
Cloudy — Use this setting when taking pictures in cloudy
conditions.
Tungsten — Use this setting when taking pictures under
incandescent lights.
Fluorescent — Use this setting when taking pictures under
fluorescent lights.
3. Use the navigation keys to highlight one of the white
balances, then the Select (left) soft key (
), the
camera applies the selected White Balance to your next
picture.
Resolution
Section 11
Resolution lets you change the size (in pixels) of your
pictures. The available resolutions and the associated
pixel sizes are indicated in the following list:
• High (VGA 640 X 480 pixels)
• Medium (QVGA 320 X 240 pixels)
• Low (QQVGA 128 X 112 pixels)
Note: With Fun Frames enabled, the camera only takes pictures in Low
Resolution mode (regardless of resolution setting).
138
Taking Pictures
1. In camera mode, use the Up and Down navigation keys
to display the desired resolution (High, Med, or Low),
the camera adjusts to the selected resolution.
2. Press the OK key or a Camera key (
the picture.
) to take
Note: The resolution setting affects zoom capabilities. When resolution is
set to High, only X1 zoom is available. When resolution is set to Med, X1
and X2 are available. When resolution is set to Low, X1, X2, and X3 zoom
settings are available.
Zoom in on a Subject
Your camera has digital zoom capabilities of up to x3 in
Low resolution mode (x2 in Medium). Pictures may
appear somewhat grainy as you zoom in; this is a
normal result of digital enhancement.
1. In camera mode, press the Left and Right navigation
keys to zoom in and out on your subject.
2. Press the OK key or a Camera key (
the picture.
) to take
Note: The Zoom setting is affected by the Resolution setting (camera
mode). When Resolution is set to High, only X1 zoom is available. When
Resolution is set to Medium, X1 and X2 are available. When Resolution is
set to Low, X1, X2, and X3 zoom settings are available.
Section 11
Section 11: Camera
139
Saving Pictures
After you’ve taken a picture, you can do any of the
following:
• Save the picture by pressing the Save (right) soft key (
).
The picture is stored in the Picture Gallery, a part of the
phone’s memory devoted to storing, browsing, and viewing
saved pictures.
• Send the picture to someone else by pressing the
OK
key.
For a detailed procedure, see “Send Picture Messages in
Camera Mode” on page 101.
• Discard the picture by pressing the Erase (left) soft key (
).
The Picture Gallery
Saved pictures are stored in the Picture Gallery. You can
browse the picture gallery one picture at a time
(expanded mode), or view several pictures at once in
thumbnail format.
1. In standby mode, briefly press a Camera key (
). The following options appear in the display:
䢇
䢇
Section 11
䢇
Take a Picture — Activates your phone’s camera and lets
you take individual photos and multiple photos (multi shots).
Picture Gallery — Lets you view and manage your saved
photos.
Settings — Lets you enable or disable the flash and adjust
the camera’s picture resolution, picture quality, and more.
2. Use the navigation keys to highlight Picture Gallery,
then press the OK key. Any pictures that you’ve saved
appear in the display.
140
The Picture Gallery
3. Use the navigation keys to browse pictures in the gallery.
4. Press the Option (left) soft key (
) while viewing
pictures in the Picture Gallery. The following options
appear in the display:
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
Pic Msg — Send the currently displayed or highlighted picture
as a Picture message.
W-Postcard — Take a picture of handwritten text and digitize
the writing and add it to an image. Once placed in the image,
you can modify the text colors, placement, and various other
features.
Assign — Assign the currently displayed or highlighted
picture to Wallpaper, as an opening and closing (power on and
power off) graphic, or as a photo ID for someone in your
Contacts list.
Rename — Rename the currently displayed or highlighted
picture.
Lock/Unlock — Lock the currently displayed or highlighted
picture so that it cannot be deleted, or unlock the picture so
that it can be deleted.
Erase — Erase the currently displayed or highlighted picture,
provided it is unlocked.
Erase All — Erase all of the unlocked pictures in the Picture
Gallery. Locked pictures must be unlocked before you can
erase them.
Picture Info — View the Title, time and date created, size,
and quality of the currently highlighted or displayed picture.
Section 11: Camera
141
Section 11
5. Use the navigation keys to highlight the desired option.
Press the OK key to perform the function for the option
or enter its sub menu.
Switch From Expanded to Thumbnail Mode
1. While viewing pictures in the picture gallery, press the
Thumb. (right) soft key ( ) to view several smaller
pictures at a time.
2. Once you’ve found a picture that you wish to view full
size, press the Expand (right) soft key ( ).
Camera Settings
The Camera Settings options let you select the default
flash, resolution, and picture quality settings the
camera will apply to your pictures.
Note: When settings are defined in the Camera menu, the settings are
permanently saved. However, when settings are defined while the phone is
in camera mode (preparing to take a picture), they are only active for the
current camera session.
Change Picture Brightness
Change the brightness of your pictures using the
Brightness setting. Options are +5 – -5.
Tip: Change a photo’s brightness for the current camera session (only) by
pressing the Option soft key while in camera mode. See “Brightness” on
page 134 for more information.
Section 11
1. In standby mode, press the MENU (left) soft key (
),
then press 7pqrs (for Camera), 3def (for Settings), and
1 for Brightness. The following options appear in the
display:
@
䢇
䢇
142
))
+5
+4
Camera Settings
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
+3
+2
+1
0
-1
-2
-3
-4
-5
2. Use the navigation keys to highlight the desired
brightness and press the OK key. You’re returned to the
Settings menu.
Note: -1 – -5 are not initially visible in the display. Use the navigation keys
to scroll down and view these menu items.
Border Pictures with Fun Frames
Add your own touch to pictures using Fun Frames.
Each of the ten available settings border and crop
pictures to lend a different theme to your images.
Note: With Fun Frames enabled, the camera will only take pictures in Low
resolution mode (regardless of the resolution setting in the camera Settings
sub menu).
Section 11: Camera
143
Section 11
1. In standby mode, press the MENU (left) soft key (
),
then press 7pqrs (for Camera), 3def (for Settings), and
2 abc for Fun Frames.
2. Use the navigation keys to highlight one of the following
fun frames.
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
Normal
Dream
Flower01
Flower02
Frame
Grape
Mask
Muscle
Star
Theater
Note: Choose Normal to disable Fun Frames.
3. Once the Fun Frame of your choice is highlighted, press
OK . You’re returned to the Settings menu.
4. Now, any pictures you take adopt the theme of the fun
frame that you’ve selected.
Be Creative with Color Tones
Change the look of your pictures with Color Tones.
Choose from five available settings such as Emboss,
Negative, and Sepia. The selected color tone previews
in the display before you take the picture.
Section 11
1. In standby mode, press the MENU (left) soft key (
),
then press 7pqrs (for Camera), 3def (for Settings), and
3def for Color Tones.
Use the navigation keys to highlight one of the following
color tones:
144
Camera Settings
Note: Choose Normal to disable Color Tones.
䢇
䢇
䢇
䢇
䢇
䢇
Normal — Subjects and pictures appear with a normal hue.
Sepia — Subjects and pictures appear in a brownish-gray
hue.
Monochrome — Subjects and pictures appear in black and
white.
Negative — Subjects and pictures appear with light and dark
colors inverted.
Emboss — Subjects and pictures appear with a raised,
ornamental look.
Sketch — Subjects and pictures appear as sketched artwork.
2. Once the color tone of your choice is highlighted, press
the OK key. You’re returned to the Settings menu.
When you take your next picture, the phone’s display
previews your subject image with the selected color
tone.
Use Shutter Sound
Choose from five different sounds whenever you take a
picture. Aside from being a cool sound effect, Shutter
Sound acts as an audible reminder that your camera
has taken the picture.
1. In standby mode, press the MENU (left) soft key (
),
then press 7pqrs (for Camera), 3def (for Settings), and
4 for Shutter Sound.
ghi
Section 11
Section 11: Camera
145
2. Use the navigation keys to highlight one of the following
shutter sounds. Each sound plays as it is highlighted.
䢇
䢇
䢇
䢇
䢇
Sound 1
Sound 2
Sound 3
Sound 4
Sound 5
3. Once your choice is highlighted, press the
You’re returned to the Settings menu.
OK
key.
The Quality Setting
You can affect how much your photo is compressed,
thereby reducing it’s overall size (not to be confused
with resolution).
1. In standby mode, press the MENU (left) soft key (
),
then press 7pqrs (for Camera), 3def (for Settings), and
5 jkl for Quality.
2. Use the navigation keys to highlight Fine, Normal, or
Economy.
3. Once the quality setting of your choice is highlighted,
press the OK key. You’re returned to the Settings
menu.
White Balance
Section 11
White Balance lets you adjust picture quality according
to available light.
1. In standby mode, press the MENU (left) soft key (
),
then press 7pqrs (for Camera), 3def (for Settings), and
for White Balance. The following White Balance
6
options appear in the display:
mno
146
Point, Click, and Send a Picture
䢇
䢇
䢇
䢇
䢇
Auto — The camera automatically adjusts picture quality to
available light.
Sunny — Use this setting when taking pictures in full sun.
Cloudy — Use this setting when taking pictures in cloudy
conditions.
Tungsten — Use this setting when taking pictures under
incandescent lights.
Fluorescent — Use this setting when taking pictures under
fluorescent lights.
2. Use the navigation keys to highlight one of the white
balances, then press the OK key. You’re returned to the
Settings menu.
Point, Click, and Send a Picture
Take a picture and send it to anyone with a compatible
device in a few easy steps.
Tip: You can send a Picture message to up to ten recipients. Separate each
recipient’s address or phone number with a comma in the Send to field of
the Picture message composer.
1. In standby mode, press and hold a Camera key (
) to activate the camera.
2. Using the display as a viewfinder, take the desired
picture by pressing a Camera key (
) or the
OK key.
4. Enter the recipient’s phone number or e-mail address
using the keypad.
Section 11: Camera
147
Section 11
3. Press the OK key to display the Picture message
composer.
Section 11
5. Press the OK key to send the Picture message to the
intended recipients.
148
Section 12: Tools
Section 12
Topics Covered
• Voice Recognition
• Today
• Scheduler
• Jump To Date
• To Do List
• Memo Pad
• Count Down
• Alarm Clock
• World Time
• Calculator
This section explains how you can use your phone’s
Personal Information Manager (PIM) functions to
view today’s calendar, schedule appointments, create
To-Do lists, set an alarm, perform simple math
calculations, and more.
Section 12: Tools
149
Section 12
Voice Recognition
Your SCH-a850 includes VoiceSignal, state-of-the-art
voice recognition software that lets you use your voice
to dial numbers, access your Contacts list, and open
Tools. To access your phone’s voice recognition, do the
following:
1. In standby mode, press the MENU (left) soft key (
then press 8 (for Tools), and 1 for Voice
Recognition. The following options appear in the
display:
tuv
䢇
䢇
䢇
䢇
@
Voice Command — Lets you place calls, access your
Contacts List, review your appointments, and more by
speaking commands into your phone. Also see “Voice Dialing”
on page 38 and “Voice Method” on page 75 for more
information.
Voice Memo — Lets you record, review, and erase voice
memos. See “Voice Memo” on page 152 for more information.
TTS — Text To Speech — Main menu item labels play
through the earpiece. See “Text To Speech (TTS)” on page 154
for more information.
Voice Setting — Lets you tailor VoiceSignal to better respond
to your voice and your phone use preferences. See “Voice
Setting — Digit Dialing” on page 154 for more information.
2. Use the navigation keys to highlight the desired submenu, then press OK .
Voice Commands
To access the Voice Commands menu, do one of the
following:
• In standby mode, press and hold the
150
),
))
0
key.
Voice Recognition
“Say a Command” appears in the display and is pronounced
through the earpiece, followed by a list of available
commands.
), then
press 8 tuv (for Tools), 1@ (for Voice Recognition), and 1@
for Voice Command.
))
))
Note: You can also set your phone to start VoiceSignal when you open the
phone. See “Voice Setting — Voice Launch” on page 159 for more
information.
The following voice commands appear in the display:
• Voice Dial — Lets you dial the phone by saying any name
stored in your contact list, without ever having to record, or
“train” that name. VoiceSignal automatically voice-activates all
your contacts, even if you have hundreds of them stored on
your phone. You can also dial any telephone number, even if it
is not stored in your contact list, by saying the digits in the
number. (See “Voice Dialing” on page 38 for more information.)
• Voice Memo — Lets you access the voice memo feature of
your phone. (See “Voice Memo” on page 152 for more
information.)
• Today — Lets you access the Today feature of your phone. (See
“Today” on page 160 for more information.)
• Calendar — Lets you access the Calendar feature of your
phone. (See “Scheduler” on page 162 for more information.)
• Contacts — Lets you look up and display contact information
for any name stored in your Contacts list by saying the name.
(See “Finding a Contacts Entry” on page 75 for more
information.)
• Status — Lets you say a single command (“Status”) to check
your phone's network coverage, signal strength, and battery.
Note: Speaking clearly, say the command that you want to use. If
VoiceSignal does not recognize a command, it prompts you to repeat the
command. If VoiceSignal still does not recognized the command, it tells you
“Sorry, no match found” and cancels voice recognition.
Section 12: Tools
151
Section 12
• In standby mode, press the MENU (left) soft key (
Section 12
Voice Command Tips:
• Make sure you wait for the beep before speaking.
• Speak clearly at a normal volume, as if you were talking on the
phone.
Voice Memo
You can use your phone to record voice memos for later
playback. You can also record the caller on the other
end of the line during a phone conversation.
Note: There is limited space for the number and length of recordings.
• The maximum number of voice memos is 10.
• The maximum length for a single voice memo is 60 seconds.
Record a Voice Memo
1. In standby mode, press the MENU (left) soft key (
),
then press 8 (for Tools), 1 (for Voice Recognition),
2 abc for Voice Memo, and 1 for Record. The phone
prompts, “Please Record After the Beep.”
tuv
@
@
))
))
Tip: In standby mode, press and hold 0 until the phone prompts, “Say a
command.” Say “Voice Memo” into the microphone to launch Voice
Memo.
2. Wait for the beep, then start speaking. As it is recording
the phone displays a countdown timer that shows the
seconds remaining for the recording.
䢇
To pause the memo, press the Pause (left) soft key (
When a memo is paused, select Resume to resume
recording.
).
3. Press the Stop (right) soft key ( ) once you’re finished
recording. The voice memo is automatically saved.
152
Voice Recognition
4. Press the
CLR
key to return to the Voice Memo menu.
Review and Erase Voice Memos
If you’ve saved any voice memos, you can review them
anytime.
1. In standby mode, press the MENU (left) soft key (
),
then press 8 (for Tools), 1 (for Voice Recognition),
2 abc for Voice Memo, and 2 abc for Review. A list of
saved voice memos appears in the display.
tuv
@
))
2. Use the navigation keys to highlight the voice memo you
wish to review.
3. Press the Play (right) soft key (
memo.
) to play the voice
4. Press the Option (left) soft key (
) to Erase the
selected voice memo, Erase All voice memos, Edit
Caption for the selected voice memo, or display Info for
the selected voice memo.
5. Press the
CLR
key to return to the Voice Memo menu.
Erase All Voice Memos at One Time
1. In standby mode, press the MENU (left) soft key (
),
then press 8 (for Tools), 1 (for Voice Recognition),
2 abc for Voice Memo, and 3def for Erase All. “Erase All
Voice Memos?” appears in the display.
tuv
@
))
2. Use the navigation keys to highlight Yes (to erase all
memos) or No (to return to the previous menu).
3. Press
OK
to confirm your selection.
Section 12: Tools
153
Section 12
The Memo Review screen appears in the display with
the new voice memo highlighted. See “Review and
Erase Voice Memos” on page 153 for more information.
Section 12
Text To Speech (TTS)
With TTS on, your phone “reads” main menu items
through the earpiece when you highlight each one. To
enable TTS, do the following:
1. In standby mode, press the MENU (left) soft key (
),
then press 8 (for Tools), 1 (for Voice Recognition),
and 3def for TTS. The following options appear in the
display:
tuv
䢇
䢇
@
))
TTS On — Enables Text-To-Speech.
TTS Off — Disables Text-To-Speech.
The current setting is highlighted. The default setting is
TTS Off.
2. Use the navigation keys to highlight TTS On. then press
the OK key to save and exit.
Voice Setting — Digit Dialing
If you regularly have trouble with VoiceSignal not
recognize the numbers you say, try adapting digit
dialing to your voice. Adapting can improve the
accuracy of digit recognition, especially for people with
strong regional accents.
Note: After you adapt Digit Dial, your phone is customized to your voice,
and your voice only. Others will not be able to use it unless they reset the
phone to factory defaults.
Adaptation involves recording several sequences of
four digits each. The recording process takes about a
minute.
154
Voice Recognition
Tips for Adapting Digit Dialing
Section 12
• Use Adapt Digits in a quiet place.
• Make sure you wait for the beep before starting to speak.
• Speak clearly, and say each digit distinctly.
• If you make a mistake while recording a sequence of digits, or
if there is an unexpected noise that spoils the recording, rerecord that sequence.
• Only adapt digits if you are regularly having problems with digit
dialing. Once you adapt, digit dialing will not work as well for
other people using your phone. (You can always reset digit
adaptation to its original state, as described below.)
Adapt Digits
To adapt digit dialing, do the following:
1. In standby mode, press the MENU (left) soft key (
),
then press 8 (for Tools), 1 (for Voice Recognition),
4 (for Voice Setting), and 1 for Digit Dialing. The
following options appear in the display:
tuv
ghi
䢇
䢇
@
))
@
))
Adapt Digits
Reset Digits
2. Use the navigation keys to highlight Adapt Digits, then
press the OK key. Your phone displays the first digit
sequence and “Please say” plays through the speaker
followed by the four digits appearing in the display.
3. Wait for the beep and say the digits using your normal
tone of voice. After a moment, the phone plays back the
recording and prompts “Did the recording sound ok?”
䢇
䢇
If the recording was good, say “Yes.”
If you need to re-record, say “No.”
If you say “No,” the phone prompts you to pronounce the
digits again. Wait for the beep and then say the digits.
Section 12: Tools
155
Repeat this step until you’re satisfied with the recording.
Section 12
4. After confirming that the recording sounds “ok”,
continue the recording process with the next set of
digits.
5. After six sets of digits, the phone asks whether you want
to do more adaptation. Answer “Yes.”
6. Repeat steps 4 and 5 for another six sets of digits. After
the second group of six sets of digits, “Adaptation
complete” plays through the speaker and you are
returned to the Setup Digit menu.
Reset Digits
To reset digit dialing to factory default settings, do the
following:
1. In standby mode, press the MENU (left) soft key (
),
then press 8 (for Tools), 1 (for Voice Recognition),
4 (for Voice Setting), and 1 for Digit Dialing. The
following options appear in the display:
@
tuv
ghi
䢇
䢇
))
@
))
Adapt Digits
Reset Digits
2. Use the navigation keys to highlight Reset Digits, then
press the OK key. The phone prompts you to confirm
digit rest.
3. Use the navigation keys to select Yes to reset your digit
adaptation, or No to cancel.
4. Press the
156
OK
key to save and exit.
Voice Recognition
Voice Setting — Sensitivity
@
tuv
))
ghi
䢇
䢇
Commands — Lets you control your phone’s sensitivity to
spoken voice commands.
Names — Lets you control your phone’s sensitivity to spoken
names from your Contact list.
2. Use the navigation keys to highlight an option, then press
the OK key to select the highlighted option. The
selected Sensitivity screen appears in the display.
3. Use the Up and Down navigation keys to adjust the
selected Sensitivity setting incrementally between
Reject More spoken commands or names and Reject
Less spoken commands or names.
4. Press the OK key or the OK (left) soft key (
) to
accept the new setting. Press the
key to discard
the new setting and return to the Voice Setting menu.
CLR
Voice Setting — Choice Lists
When VoiceSignal cannot recognize a name or number,
it displays a choice list of up to three possible choices,
and prompts you to confirm the correct one.
You can select how VoiceSignal will use choice lists
with name dialing, digit dialing, and contacts.
To change the way VoiceSignal uses choice lists:
1. In standby mode, press the MENU (left) soft key (
),
then press 8 (for Tools), 1 (for Voice Recognition),
4 (for Voice Setting), and 3def for Choice Lists.
tuv
@
))
ghi
Section 12: Tools
157
Section 12
1. In standby mode, press the MENU (left) soft key (
),
then press 8 (for Tools), 1 (for Voice
Recognition), 4 (for Voice Setting), and 2 abc for
Sensitivity. The following options appear in the display:
2. Use the navigation keys to highlight Name Dialing, Digit
Dialing, or Contacts, then press the OK key.
Section 12
3. Use the navigation keys to highlight the Choice List
behavior you prefer:
䢇
䢇
䢇
Automatic — VoiceSignal displays a choice list only when it is
not sure if it has correctly recognized the name or number.
Always On — VoiceSignal always displays a choice list, even
when there is only one choice.
Always Off — VoiceSignal never displays a choice list.
4. Press the OK key or the OK (left) soft key (
) to
accept the new setting. Press the
key to discard
the new setting and return to the Voice Setting menu.
CLR
Voice Setting — Sound
Sound lets you specify what (if any) text prompts you
want your phone to read to you through the earpiece.
1. In standby mode, press the MENU (left) soft key (
),
then press 8 (for Tools), 1 (for Voice Recognition),
4 (for Voice Setting), and 4 for Sound. The
following options appear in the display:
tuv
ghi
䢇
䢇
䢇
䢇
@
))
ghi
Prompts — Enables or disables audio prompts.
Digits — Enables or disables audio digit playback.
Names — Enables or disables audio name playback.
Name Settings — Lets you adjust the Speed (Faster or
Slower) and Volume (Louder or Softer) of your phone’s
audio name playback.
2. Use the Up and Down navigation keys to highlight the
desired option, then press the OK key.
3. Use the Up and Down navigation keys to highlight the
desired setting.
158
Voice Recognition
4. Press the OK key or the OK (left) soft key (
) to
accept the new setting. Press the
key to discard
the new setting and return to the Voice Setting menu.
CLR
To set the key or action that launches VoiceSignal, do
the following:
1. In standby mode, press the MENU (left) soft key (
),
then press 8 (for Tools), 1 (for Voice Recognition),
4 (for Voice Setting), and 5 for Voice Launch. The
following options appear in the display:
tuv
@
))
jkl
ghi
䢇
䢇
䢇
Zero Only? — Press and hold 0 to activate VoiceSignal for
one call.
Zero or Flip? — Press and hold 0 to activate VoiceSignal
for repeated calls. Open and close folder to make and end calls
using Voice Recognition. Press END to release VoiceSignal.
Zero or EarMic? — Attach a headset to your phone. Press
and hold 0 or press and hold the button on the headset to
activate VoiceSignal.
2. Use the navigation keys to highlight the option you want,
then press the OK key to save and exit. Press the
key to discard the new setting and return to the Voice
Setting menu.
CLR
Voice Setting — About VoiceSignal
This option causes the About VoiceSignal screen to
appear in the display, showing version and build
information about the VoiceSignal software included on
your phone.
1. In standby mode, press the MENU (left) soft key (
),
then press 8 (for Tools), 1 (for Voice Recognition),
4 (for Voice Setting), and 6 for About.
tuv
ghi
@
))
mno
Section 12: Tools
159
Section 12
Voice Setting — Voice Launch
Section 12
The About VoiceSignal screen appears in the display
showing the version level of the VoiceSignal software
currently installed on your phone.
Today
Schedule up to nine events for the current day by
indicating each event’s start and end time. Set alarms
for events so that you can be alerted before an event
takes place. Events scheduled for future dates
automatically appear on your Today events schedule
for the present day.
Add a New Event
1. In standby mode, press the MENU (left) soft key (
),
then press 8 (for Tools) and 2 abc for Today. One of
the following screens appears in the display:
tuv
䢇
䢇
The New Event screen.
Or
The Event screen, showing events scheduled for today.
Tip: To launch Today using a voice command — In standby mode, press
and hold 0 until the phone prompts, “Say a command.” Say
“Today” into the microphone.
2. If the Event screen appears, press the Option (left) soft
key (
) and press 1 for Add new. The New Event
screen appears in the display.
@
))
3. In the New Event screen, enter details of the new event
using the keypad, then press the Option (left) soft key
(
). A pop-up menu containing the following text entry
mode options appears in the display:
䢇
160
T9 Word
Today
䢇
䢇
Note: The current mode of text entry is indicated in the lower right corner
of the display.
4. Use the navigation keys to highlight the entry mode that
you wish to use, or press OK to exit the pop-up menu.
Note: See “Section 5: Entering Text” on page 63 for more information
about entering text.
5. When you’re finished entering details for the event, press
OK . The Time Setup screen appears in the display.
Use the Up and Down navigation keys to select Time
Setup options.
6. To set the Time:
䢇
䢇
Use the Left and Right navigation keys to select am or pm.
Enter the time for the event using the keypad.
7. Enter the Date for the event using the keypad.
8. When you’re finished entering the time and date, use the
Up and Down navigation keys to highlight Alarm Option.
9. Use the Left and Right navigation keys to select No
alarm or to select the amount of time before the event
occurs that you wish to be notified by an alarm.
10. Press OK to store the event in your calendar. An alarm
will notify you prior to the event, if Alarm Option is set to
a value other than No alarm.
Section 12: Tools
161
Section 12
䢇
ABC
Symbol
123
Section 12
Scheduler
Scheduler allows you to view the current, past, or
future month in calendar format. While viewing the
calendar, the current date is highlighted, and days with
scheduled events are surrounded by a box.
View an Event
1. In standby mode, press the MENU (left) soft key (
),
then press 8 (for Tools) and 3def for Scheduler.
tuv
Tip: To launch Calendar using a voice command — In standby mode, press
and hold 0 until the phone prompts, “Say a command.” Say
“Calendar” into the microphone.
2. A calendar appears in the display with the current date
highlighted. The month, day, and year appear at the top
of the display.
3. Use the navigation keys to highlight different dates
within the current month.
䢇
䢇
䢇
Press OK to open a date that is highlighted.
Press the volume up key to view previous months.
Press the volume down key to view future months.
4. Press the Option (left) soft key (
options appear in the display:
䢇
䢇
). The following
View — View events for the date surrounded by a box.
Add new — Add a new event for the date.
5. Use the navigation keys to highlight an option. Press
to enter the highlighted option’s sub menu.
162
OK
Jump To Date
Jump To Date
1. In standby mode, press the MENU (left) soft key (
),
then press 8 (for Tools) and 4 for Jump To Date.
The Jump to Date entry screen appears in the display.
tuv
ghi
2. Enter the desired Jump to date, then press OK . The
calendar month for the date you specified appears in the
display, with the date that you entered highlighted.
Note: See “Scheduler” on page 162 for more information.
To Do List
The To Do List allows you to create a task list. You can
store, prioritize and manage up to twenty To Do List
tasks.
1. In standby mode, press the MENU (left) soft key (
),
then press 8 (for Tools) and 5 jkl for To Do List. The
Add To Do screen appears in the display.
tuv
2. Enter details of the task using the keypad. Press the
Option (left) soft key (
) to display a pop-up menu
containing the following text entry mode options.
䢇
䢇
䢇
䢇
T9 Word
ABC
Symbol
123
Section 12: Tools
163
Section 12
Go directly to any date that you specify in the Jump to
Date entry screen.
Section 12
Note: The current mode of text entry is indicated in the lower right corner
of the display.
3. Use the navigation keys to highlight the entry mode that
you wish to use, or press OK to exit the pop-up menu.
Note: See “Section 5: Entering Text” on page 63 for more information
about entering text.
4. When you’re finished entering details for the task, press
OK . A Time Setup screen appears in the display.
Use the Up and Down navigation keys to select Time
Setup options.
5. Use the Left and Right navigation keys to select the
Priority for the task (High or Low).
6. Press the Down navigation key to highlight Enter Date.
7. To set the Time:
䢇
䢇
Use the Left and Right navigation keys to select am or pm.
Enter the time for the task using the keypad.
8. Enter the Date for the task using the keypad.
9. Press
OK
to store the task.
Add, Edit, and Erase To-Do List Tasks
1. In standby mode, press the MENU (left) soft key (
),
then press 8 (for Tools) and 5 jkl for To Do List.
tuv
2. Use the Left and Right navigation keys to browse tasks
in your To Do List. Events are presented in order of
priority.
3. Press the Option (left) soft key (
) while viewing your
To Do List. The following options appear in the display:
164
Memo Pad
䢇
䢇
䢇
4. Use the navigation keys to highlight an option.
5. Press OK to perform the function for the highlighted
option.
Memo Pad
Create notes and store them in Memo Pad. Notes that
you create in Memo Pad can’t be prioritized or assigned
an alert. Return to Memo Pad anytime to review and
edit your notes.
1. In standby mode, press the MENU (left) soft key (
),
then press 8 (for Tools) and 6 for Memo Pad.
tuv
mno
2. If you have any stored memos, they appear as a list in
the display. If this is your first time in Memo Pad, you’re
prompted to add a new memo.
3. Enter a memo using the keypad.
4. Press the Option (left) soft key (
) to display a pop-up
menu containing the following text entry mode options.
䢇
䢇
䢇
䢇
T9 Word
ABC
Symbol
123
Note: The current mode of text entry is indicated in the lower right corner
of the display.
Section 12: Tools
165
Section 12
䢇
Add new — Add a new task to the To Do List.
Edit — Edit the task currently appearing in the display.
Erase — Erase the task currently appearing in the display.
Erase All — Erase all tasks from your To Do List.
Section 12
5. Use the navigation keys to highlight the entry mode that
you wish to use, or press OK to exit the pop-up menu.
Note: See “Section 5: Entering Text” on page 63 for more information
about entering text.
6. When you’re finished entering details for the memo,
press OK . The memo is stored.
Review, Add, Edit, and Erase Memos
1. In standby mode, press the MENU (left) soft key (
),
then press 8 (for Tools) and 6 for Memo Pad. Your
list of stored memos appears in the display.
tuv
mno
2. Use the navigation keys to browse memos. Press
open a highlighted memo.
OK
to
3. Press the Option (left) soft key (
) while viewing your
memos. The following options appear in a pop-up menu:
䢇
䢇
䢇
䢇
Add new — Add a new memo to Memo Pad.
Edit — Edit the memo currently highlighted or appearing in
the display.
Erase — Erase the memo currently highlighted or appearing
in the display.
Erase All — Erase all memos from Memo Pad.
4. Use the navigation keys to highlight an option.
5. Press OK to perform the function for the highlighted
option.
166
Count Down
Count Down
1. In standby mode, press the MENU (left) soft key (
),
then press 8 (for Tools) and 7pqrs for Count Down.
tuv
Note: If you have any stored Count Down timers, the first timer appears in
the display. If you have more than one, the event scheduled closest to
today’s date appears first. Use the navigation keys to browse between
multiple timers.
2. Enter details for the Count Down event using the keypad.
3. Press the Option (left) soft key (
) to display a pop-up
menu containing the following text entry mode options.
䢇
䢇
䢇
䢇
T9 Word
ABC
Symbol
123
Note: The current mode of text entry is indicated in the lower right corner
of the display.
4. Use the navigation keys to highlight the entry mode that
you wish to use, or press OK to exit the pop-up menu.
Note: See “Section 5: Entering Text” on page 63 for more information
about entering text.
5. Once you’ve finished entering details for the Count Down
event, press OK . The Count Down screen appears in
the display.
Section 12: Tools
167
Section 12
Count Down allows you to view the amount of time
between the current date and any event that you wish
to schedule. You can create up to twenty Count Down
events.
Use the Up and Down navigation keys to select Count
Down options.
Section 12
6. To set the Time:
䢇
䢇
Use the Left and Right navigation keys to select am or pm.
Enter the time for the task using the keypad.
7. Enter the Date for the task using the keypad.
8. Press
OK
to store the event.
Review, Add, Edit, and Erase Count Down Events
Review scheduled Count Down events to determine
how much time remains between the current time/date
and any event that you’ve scheduled. You can also add
another event, or edit and erase previously scheduled
events.
1. In standby mode, press the MENU (left) soft key (
),
then press 8 (for Tools) and 7pqrs for Count Down.
tuv
2. Any stored Count Down events appear in the display. The
event scheduled closest to the current date appears first
in the display.
Event details of the scheduled event appear in the upper
half of the display. The number of days, hours, and
minutes remaining until the time and date of the
scheduled event appear in the lower half of the display.
3. Press the Option (left) soft key (
) while viewing your
memos. The following options appear in the display:
䢇
䢇
䢇
䢇
168
Add new — Add a new event to Count Down.
Edit — Edit the event currently appearing in the display.
Erase — Erase the event currently appearing in the display.
Erase All — Erase all scheduled events from Count Down.
Alarm Clock
4. Use the navigation keys to highlight an option. Press
OK to perform the function for the highlighted option.
Section 12
Alarm Clock
Your phone has three alarm clocks that can be set to go
off once, or to recur daily at a specific time. Once set, an
alarm clock is easy to change or turn off completely.
Note: The alarm doesn’t function when the phone is turned off. If the time
for an alarm that was set for Once has elapsed while the phone is off, the
alarm occurs at the specified time on the next day.
1. In standby mode, press the MENU (left) soft key (
),
then press 8 (for Tools) and 8 for Alarm Clock.
The following options appear in the display:
tuv
䢇
䢇
䢇
tuv
Alarm Clock 1
Alarm Clock 2
Alarm Clock 3
2. Use the navigation keys to highlight the alarm clock that
you wish to set, then press OK . The Alarm Set screen
appears in the display.
Use the Up and Down navigation keys to select Alarm
Set options.
3. Use the Left and Right navigation keys to set the alarm
Off or On.
4. To set the Time:
䢇
䢇
Use the Left and Right navigation keys to select am or pm.
Enter the time for the task using the keypad.
Section 12: Tools
169
Section 12
5. Use the Left and Right navigation keys to select the
frequency at which you wish the alarm to occur (Once,
Daily, Mon-Fri, Mon-Sat, Every Sun, Every Sat, or
Every Weekend).
6. Press OK when you’re finished entering the time and
frequency for the alarm. If the alarm is set to On, the
alarm icon ( ) appears in the top of the display.
When an Alarm Sounds
An animated alarm clock appears in the display and an
alert sounds when the specified time for the alarm
arrives.
• Press OK to silence the alarm.
• If the alarm was set as a Daily alarm, the alarm icon remains in
the top of the display.
• If the alarm was set as a Once only alarm, the alarm icon
disappears from the top of the display.
Turn Off the Alarm
1. In standby mode, press the MENU (left) soft key (
),
then press 8 (for Tools) and 8 for Alarm Clock.
The following options appear in the display:
tuv
䢇
䢇
䢇
tuv
Alarm Clock 1
Alarm Clock 2
Alarm Clock 3
2. Use the navigation keys to highlight the desired alarm,
then press OK . The following options appear in the
display:
䢇
䢇
䢇
170
Alarm
Time
Alarm Interval
World Time
3. Use the Up/Down navigation keys to highlight Alarm.
World Time
World Time lets you view the time of day or night in
any of the 24 different time zones around the world.
Note: To use World Time, you need to subscribe to your Cellular Provider’s
digital service.
1. In standby mode, press the MENU (left) soft key (
),
then press 8 (for Tools) and 9wxyz for World Time. A
world map appears in the display.
tuv
2. Use the Left and Right navigation keys to browse cities
and their current times. The following cities are
supported.
Alaska
Chicago/Mexico
Brasilia
London
Moscow
Alma-ata
Seoul/Tokyo
Wellington
San Francisco
New York
Mid Atlantic
Paris/Berlin
Abu Dhabi
Bangkok/Jakarta
Guam/Sydney
Samoa/Midway
Denver/Arizona
Caracas
Cape Verde
Athens/Helsinki
Tashkent
Hongkong/Beijing
Okhotsk
Honolulu, Hawaii
3. Do one of the following:
䢇
䢇
Press the OK key to set the selected time zone as the home
time zone for your phone.
Press the Back (right) soft key (
) to return to the Tools
menu.
Section 12: Tools
171
Section 12
4. Use the Left/Right navigation keys to highlight Off, then
press OK . The selected alarm is turned off.
Enable Daylight Savings Time (DST)
Section 12
1. While viewing the World Time map, press the Option
(left) soft key (
). Off and On appear in the display.
2. Use the navigation keys to highlight On, then press
Daylight Savings Time is enabled.
OK
.
Calculator
You can perform calculations, including addition,
subtraction, multiplication and division using your
phone.
1. In standby mode, press the MENU (left) soft key (
),
then press 8 (for Tools) and 0 for Calculator. The
Calculator appears in the display.
tuv
2. Enter the first number in your equation using the keypad.
(Numbers can be up to nine digits long.)
䢇
䢇
䢇
Press
to enter a decimal point.
Press # to change the sign for a number to a negative.
Press the Option (left) soft key (
) to add parentheses [( )]
to your equation or to enter an exponent (^), such as, 3^2,
which is the equivalent of 32.
3. Use the navigation keys (as shown in the Calculator
screen) to set the type of calculation that you wish to
perform. Your choices are as follows.
䢇
䢇
䢇
䢇
[ + ] Addition
[ x ] Multiplication
[ - ] Subtraction
[ ÷ ] Division
4. Use the keypad to enter the second number into your
equation.
172
Calculator
5. Press
result.
OK
to perform the calculation and view the
Section 12
Section 12: Tools
173
174
Section 12
Section 13: Setup
Topics Covered
• Location Setting
• Display Settings
• Sound Settings
• Network Settings
Section 13
• Security Settings
• Call Options
• Shortcut Setting
• Language Setting
• Clock Set
• Version Information
This section explains how to configure your phone’s
language, network preferences, security options, and
other settings.
Section 13: Setup
175
Location Setting
You can set your phone to pass Global Positioning
System (GPS) data to identify your location to the
network continually or only when you make an
emergency (911) call.
Note: Check with your wireless carrier to determine if/when/where
location-based services are available.
1. In standby mode, press the MENU (left) soft key (
),
then press 9wxyz (for Setup) and 1 for Location. The
following Location options appear in the display:
Section 13
@
䢇
䢇
))
Location On — Your location data is continually sent
wherever the feature is available.
911 Only — Your location data is sent only when you dial 911.
2. Use the navigation keys to highlight an option.
3. Press OK to select the function. The Setup menu
appears in your display.
4. Press
END
to return to standby mode.
Display Settings
Display settings let you change your phone’s menu
appearance, display brightness and contrast, and
display content to better meet your needs.
Display Settings
You can set the menu style, standby mode animation,
customize backlight settings, and more in the Display
sub menu.
176
Display Settings
1. In standby mode, press the MENU (left) soft key (
),
then press 9wxyz (for Setup) and 2 abc for Display. The
following menus appear in the display:
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
2. Use the navigation keys to highlight a sub menu.
3. Press the OK key to enter the highlighted sub menu.
The following sections describe the Display sub menus in
greater detail.
Menu Style
1. In standby mode, press the MENU (left) soft key (
),
then press 9wxyz (for Setup), 2 abc (for Display), and 1
for Menu Style. The following options appear in the
display:
@
䢇
䢇
))
Icon — Shows all main menus as an array of icons.
List — Shows main menus in scrollable list (text) format.
Section 13: Setup
177
Section 13
䢇
Menu Style — Choose how main menus appear in the
display when the MENU (left) soft key(
) is pressed.
Animation — Choose the images that display on your phone
when you turn it on, turn if off, and while in standby mode.
Banner — Create your own personalized greeting that
appears in the display when your phone is in standby mode.
Backlight — Set backlight options for the display and
keypad.
Auto Hyphen — With Auto Hyphen enabled, your phone
automatically hyphenates numbers as they are entered.
Dial Digits — Lets you select the color of your dialing font.
Dial Screen — Lets you select the background color for the
dialing screen. You can choose from a variety of colors.
Contrast — Lets you set display contrast.
Service LED — Enable or disable the Service LED.
2. Use the navigation keys to highlight Icon or List, then
press the OK key.
Animation
Animation lets you choose the animated pictures that
appear in your phone’s display when you turn it on,
turn it off, and while in standby mode.
Section 13
1. In standby mode, press the MENU (left) soft key (
),
then press 9wxyz (for Setup), 2 abc (for Display), and
2 abc for Animation. The following options appear in the
display:
䢇
䢇
䢇
Opening — Lets you select an animated image file that
appears in the display during the phone’s power on sequence.
Closing — Lets you select an animated image file that
appears in the display during the phone’s power off sequence.
Wallpaper — Lets you select an animated image file that
appears in the display when your phone is in standby mode.
2. Use the navigation keys to highlight the desired
animation, then press the OK key. The following options
appear in the display:
䢇
䢇
My Image — Lets you select an image that you’ve
downloaded from the Internet as an Opening, Closing, or
Wallpaper image.
Preloaded — Lets you select an image that came preloaded
with your phone as an Opening, Closing, or Wallpaper image.
3. Use the navigation keys to highlight the image type that
you wish to use and press the OK key. A list of images
appears in the display.
4. Use the navigation keys to highlight the image that you
wish to use and press the OK key to save your
selection.
178
Display Settings
Banner
Create your own personalized greeting that appears in
the display while your phone is in standby mode.
1. In standby mode, press the MENU (left) soft key (
),
then press 9wxyz (for Setup), 2 abc (for Display), and 3def
for Banner.
Tip: Press and hold
CLR
to erase an existing banner, if necessary.
3. Press the
OK
key to save the new banner.
Backlight
You can set the backlight for your display or keypad to
remain on for a specified period of time or remain on as
long as the folder is open.
Note: Prolonged backlight use drains your battery faster.
1. In standby mode, press the MENU (left) soft key (
),
then press 9wxyz (for Setup), 2 abc (for Display), and 4
for Backlight. The following sub menus appear in the
display:
ghi
䢇
䢇
LCD — Sets the time the internal display backlight remains on
after a period of inactivity. Optional settings are: 5 seconds, 10
seconds, 15 seconds, and Folder Open.
Keypad — Sets the amount of time the keypad backlight
remains on after a period of inactivity. Optional settings are: 5
seconds, 10 seconds, 15 seconds, and Folder Open.
Section 13: Setup
179
Section 13
2. Enter a word or short phrase to appear in your phone’s
display while in standby mode (Up to 12 characters).
See “Section 5: Entering Text” on page 63 for more
information.
䢇
Power save — Unless the backlight settings have been
changed, the backlight dims after a minute of inactivity, and
then turns off. With Power save enabled (On), the backlight for
the internal display is always dim. If the backlight settings have
not been changed, after 15 seconds of inactivity, Power save
turns the backlight off.
Section 13
2. Use the navigation keys to highlight the desired sub
menu and press the OK key.
3. Use the navigation keys to change settings as desired
the selected sub menu, and press the OK key to save
your selection.
Auto Hyphen
Auto Hyphen automatically hyphenates phone
numbers as they are entered. For example: 5804370000
automatically becomes 580-437-0000.
1. In standby mode, press the MENU (left) soft key (
),
then press 9wxyz (for Setup), 2 abc (for Display), and 5 jkl
for Auto Hyphen. The following options appear in the
display:
䢇
䢇
No — Disables Auto Hyphen.
Yes — Enables Auto Hyphen.
2. Use the navigation keys to highlight the desired setting
and press the OK key to save the setting.
Dial Digits
Lets you select the color of your dialing font.
1. In standby mode, press the MENU (left) soft key (
),
then press 9wxyz (for Setup), 2 abc (for Display), and 6
for Dial Digits. The following options appear in the
display:
mno
180
Display Settings
䢇
Hyphenated — Each set of entered digits (area code,
exchange, and directory number) each appear in a different
color.
Note: To select the Hyphenated option, you must first set the Auto
Hyphen to On.
䢇
䢇
Rainbow — Entered digits each appear in a different color in
the dialing screen.
Basic — Entered digits appear as black in the dialing screen.
Dial Screen
Lets you select the background color for the dialing
screen. You can choose from a variety of colors.
1. In standby mode, press the MENU (left) soft key (
),
then press 9wxyz (for Setup), 2 abc (for Display), and 7pqrs
for Dial Screen. The following options appear in the
display:
䢇
䢇
Color Setting — Shows a preview of the Dialing Screen and a
color selection bar.
Off — Sets the dialing screen background color to the default
value (white).
2. Use the navigation keys to highlight the desired option,
then press the the OK key.
3. If you select Color Setting, use the navigation keys to
highlight the desired background color (which appears in
the preview screen), then press the OK key to save the
selected color setting.
Section 13: Setup
181
Section 13
2. Use the navigation keys to highlight the desired setting
and press the OK key to save the selected setting.
Contrast
Set the display contrast to your preference.
1. In standby mode, press the MENU (left) soft key (
),
then press 9wxyz (for Setup), 2 abc (for Display), and 8
for Contrast. The following options appear in the display:
tuv
䢇
䢇
Main LCD
Front LCD
Section 13
2. Use the navigation keys to highlight the display you want
to adjust, then press the OK key. An interactive contrast
adjustment screen appears in the display showing the
current contrast setting.
3. Use the Left and Right navigation keys to adjust the
contrast for the selected display. The results of your
adjustments appear in the display.
4. Press the
OK
key to save your new contrast setting.
Service LED
You can enable or disable your phone’s Service LED.
The Service LED is located to the right of the folder
hinge, on the front of your phone. The Service LED
notifies you of the charge status, incoming calls, and
more.
1. In standby mode, press the MENU (left) soft key (
),
then press 9wxyz (for Setup), 2 abc (for Display), and 9wxyz
for Service LED. The following options appear in the
display:
䢇
䢇
Off — Disables the service LED.
On — Enables the service LED.
2. Use the navigation keys to highlight the desired setting
and press the OK key to save the selected setting.
182
Sounds Settings
Sounds Settings
Sound settings let you customize your phone’s audio
properties, such as ringers, keypad tones, alerts, start
up melody, and more.
Volume/Vibrate
Use the Volume/Vibrate sub menu to set the default
volume for incoming calls and alarms.
1. In standby mode, press the MENU (left) soft key (
),
then press 9wxyz (for Setup), 3def (for Sounds), and 1
for Volume/Vibrate. The following options appear in the
display:
@
䢇
Calls — Lets you set your phone to be silent, play a sound,
and/or vibrate in response to incoming calls.
Alarm — Lets you set your phone to be silent, play a sound,
and/or vibrate in response to a preset alarm time being
reached.
2. Use the navigation keys to highlight the desired option,
then press the OK key.
3. Use the navigation keys or the up and down volume keys
on the left side of your phone to select the volume level
(Silent, 1 Beep, or Levels 1 – 5) or vibrate mode
(Vibrate, Vib+Ring) for the selected option.
4. Press the
OK
key to save the option setting.
Ringer Type
You can assign ring tones and melodies for calls,
alarms, and other alerts in the Ringer Type sub menu.
Section 13: Setup
183
Section 13
䢇
))
1. In standby mode, press the MENU (left) soft key (
),
then press 9wxyz (for Setup), 3def (for Sounds), and 2 abc
for Ringer Type. The following ringer types appear in the
display:
䢇
䢇
䢇
Section 13
䢇
Calls
Alarm
Data
Planner
2. Use the navigation keys to highlight a ringer type, then
press the OK key. A pop-up menu with the following
options appears in the lower left of the display:
Note: My Melody doesn’t contain ringers or tones, unless you’ve
previously downloaded them over the air.
䢇
䢇
My Melody
Preloaded
3. Use the navigation keys to highlight Preloaded, then
press the OK key.
4. Use the volume keys to scroll through the ringer types
and melodies for the selected ringer type. Each tone
plays as you scroll through the list.
5. When the desired ringer type plays, press the
save.
OK
key to
Key Beep
Key Beep allows you to adjust the volume level and
length of tone that the keypad generates each time you
press a key.
184
Sounds Settings
1. In standby mode, press the MENU (left) soft key (
),
then press 9wxyz (for Setup), 3def (for Sounds), and 3def
for Key Beep. The following options appear in the
display:
䢇
䢇
Volume
Tone Length
Volume is highlighted.
2. Press the
䢇
key to adjust the Key Beep volume.
3. Use the navigation keys to highlight Tone Length, then
press the OK key.
䢇
䢇
Use the navigation keys to highlight Long or Normal.
Press the OK key to save your setting. You are returned to the
Key Beep sub menu.
Alerts
You can set your phone to sound an alert whenever you
enter or leave your service area, connect or disconnect a
call, and other options.
1. In standby mode, press the MENU (left) soft key (
),
then press 9wxyz (for Setup), 3def (for Sounds), and 4
for Alerts. The following options appear in the display:
ghi
䢇
䢇
䢇
Minute Beep — Sound an alert ten seconds before each
elapsed minute of a call.
Service — Sound an alert when you go into and out of
coverage areas.
Connect — Sound an alert when you connect a call.
Section 13: Setup
185
Section 13
䢇
OK
Use the volume keys or navigation keys to set the volume level
for keypad tones.
Press the OK key when the desired key beep volume setting
is reached. You are returned to the Key Beep sub menu.
䢇
䢇
䢇
䢇
Disconnect — Sound an alert when you disconnect a call.
Fade — Sound an alert when a dropped call occurs during a
conversation.
Roam — Sound an alert when you leave your home service
area while on a call.
Privacy — Emit a tone whenever you are in enhanced privacy
mode.
Section 13
2. Use the navigation keys to highlight a sub menu, then
press the OK key.
3. Use the Up/Down navigation keys to activate (or not
activate) the selected alert.
4. Press the
OK
key to confirm your selection.
Power On/Off
Set your phone to play a sound whenever you turn the
phone on and off.
1. In standby mode, press the MENU (left) soft key (
),
then press 9wxyz (for Setup), 3def (for Sounds), and 5 jkl
for Power On/Off.
2. Use the navigation keys to highlight On or Off, then press
the OK key.
Roam Ringer
Set your phone to sound a unique tone when a call is
received outside a network service area. This feature is
set to Off by default.
1. In standby mode, press the MENU (left) soft key (
then press 9wxyz (for Setup), 3def (for Sounds), and
for Roam Ringer.
186
),
6mno
Network Settings
2. Use the navigation keys to highlight Off or On, then press
the OK key.
Whisper Mode
This feature allows you to talk in a low volume during
a phone conversation and still be heard by the party.
1. In standby mode, press the MENU (left) soft key (
),
then press 9wxyz (for Setup), 3def (for Sounds), and 7pqrs
for Whisper Mode.
Section 13
2. Use the navigation keys to highlight Off or On, then
press the OK key.
Network Settings
The Network sub menu allows you to set your
preferred system. Contact your wireless carrier for
more information.
Set NAM
1. In standby mode, press the MENU (left) soft key (
),
then press 9wxyz (for Setup), 4 (for Network), and 1
for Set NAM. The following Set NAM options appear in
the display:
@
ghi
䢇
䢇
))
NAM 1 — Your service contract has one phone line.
NAM 2 — Your service contract has two phone lines.
2. Use the navigation keys and to highlight NAM 1 or NAM
2, the press OK to save your selection.
The idle screen appears in the display.
Section 13: Setup
187
Roam Option
The Roam Option feature enables you to automatically
or manually select the network used when roaming
outside of your home area.
1. In standby mode, press the MENU (left) soft key (
),
then press 9wxyz (for Setup), 4 (for Network), and 2 abc
for Roam Option. The following roaming options appear
in the display:
ghi
metroPCS only — Roaming is off. If your home system is not
available then your call will not be connected, and the no
service icon ( ) appears in the display. In some service areas,
an operator may come on-line and ask you how you would
prefer to pay for the call.
• Automatic — Roaming is on. It will always try your calls using
the Preferred Roaming List (PRL) loaded into your phone. If a
preferred service is not found, then this option will attempt to
acquire any digital or analog service.
Section 13
䢇
2. Use the navigation keys and to highlight the desired
Roam option, the press OK to save your selection.
The Network menu appears in the display.
Security Settings
Use the Security sub menu to lock your phone, set up
emergency numbers, enable or disable voice privacy,
set restrictions, and other security options.
188
Security Settings
Lock Phone
Locking the phone blocks all outgoing calls except
those to 911 and to the five user-programmed
emergency numbers. You can lock the phone manually,
or set the phone to lock automatically when turned on.
In Lock mode, you can answer calls, but you must
unlock the phone to place calls (except to emergency
and secret numbers).
1. In standby mode, press the MENU (left) soft key (
then press 9wxyz (for Setup) and 5 jkl for Security.
),
The Lock prompt appears in the display.
2. Enter the four-digit lock code using the keypad.
Note: The default lock code is the last four digits of your mobile phone
number.
The Lock prompt disappears and the Security menu
appears in the display.
3. Press 1 for Lock Phone. The following options appear
in the display:
@
䢇
䢇
䢇
))
Disable — The phone remains unlocked.
Enable on Power Up — The phone locks automatically the
next time your phone is powered on and stays locked until you
enter the lock code.
Enable Always — The phone locks immediately and stays
locked until you enter the lock code.
Section 13: Setup
189
Section 13
Important! If you change the NAM1 setting after setting the phone to lock
upon power-up and did not program a number into NAM2, you won’t be
able to access your phone. You must call the Service Center to unlock your
phone.
4. Use the navigation keys to highlight the Lock Phone
option of your choice.
5. Press OK to perform the function for the highlighted
option.
Change Lock
The default lock code is generally the last four digits of
your phone number. It is advisable to change the
default lock code to a secret code for security purposes.
Section 13
1. In standby mode, press the MENU (left) soft key (
then press 9wxyz (for Setup) and 5 jkl for Security.
),
The Lock prompt appears in the display.
2. Enter the four-digit lock code using the keypad.
Note: The default lock code is the last four digits of your mobile phone
number.
The Lock prompt disappears and the Security menu
appears in the display.
3. Press 2 abc for Change Lock. You’re prompted to enter
the new lock code.
4. Enter the new lock code. You’re prompted to re-enter the
new lock code for verification.
5. Enter the new lock code again. Your changes are stored.
Note: Your phone does not allow you to view the lock code for obvious
security reasons. If you change the lock code, be sure to write down or
memorize the new code.
190
Security Settings
Emergency #
You have the option of storing up to five emergency
numbers to your phone. Each number can be up to 32
digits in length. All emergency numbers can be dialed
any time, even when your phone is locked or restricted.
Note: Emergency number 911 is hard-coded into your phone. You can dial
this number any time, even when the phone is locked or restricted. If you
call 911 an audible tone is heard and an Emergency prompt appears in the
display for the duration of the call.
Important! DO NOT depend on this phone as a primary method of calling
911 or for essential or emergency calls.
Remember to always turn your phone on and check for
adequate signal strength before placing a call.
Note: When you dial an emergency number, you phone locks itself to the
emergency location that answered the call and locks itself in 911-Only
mode, blocking from dialing any number but an emergency number.
Store Emergency Numbers
1. In standby mode, press the MENU (left) soft key (
then press 9wxyz (for Setup) and 5 jkl for Security.
),
The Lock prompt appears in the display.
2. Enter the four-digit lock code using the keypad.
Section 13: Setup
191
Section 13
Important! Because of various transmission methods, network
parameters, and user settings used to complete a call from your wireless
phone, a connection cannot always be guaranteed. Therefore, emergency
calling may not be available on all wireless networks at all times.
Note: The default lock code is the last four digits of your mobile phone
number.
The Lock prompt disappears and the Security menu
appears in the display.
3. Press 3def for Emergency #.
4. Press 1 , 2 abc , 3def , 4 , or 5 jkl to select from the
three entry openings.
@
))
ghi
Section 13
5. Enter the emergency number (up to 32 digits in length).
6. Press
7. Press
OK
CLR
to save the number that you entered.
to exit and return to the previous menu.
Call Emergency Numbers in Lock Mode
1. In standby mode, enter the emergency number via the
keypad.
2. Press
SEND
to place the call.
Voice Privacy
Voice Privacy allows you to prevent those you call from
seeing your number in their display when receiving
your call.
1. In standby mode, press the MENU (left) soft key (
then press 9wxyz (for Setup) and 5 jkl for Security.
The Lock prompt appears in the display.
2. Enter the four-digit lock code using the keypad.
Note: The default lock code is the last four digits of your mobile phone
number.
192
),
Security Settings
The Lock prompt disappears and the Security menu
appears in the display.
3. Press 4 for Voice Privacy. The following options
appear in the display:
ghi
䢇
䢇
Standard — Voice privacy is disabled.
Enhanced — Voice privacy is enabled.
4. Use the navigation keys to highlight the Voice Privacy
option of your choice, then press OK .
Restriction
1. In standby mode, press the MENU (left) soft key (
then press 9wxyz (for Setup) and 5 jkl for Security.
),
The Lock prompt appears in the display.
2. Enter the four-digit lock code using the keypad.
Note: The default lock code is the last four digits of your mobile phone
number.
The Lock prompt disappears and the Security menu
appears in the display.
3. Press 5 jkl for Restriction. The following options appear
in the display:
䢇 Outgoing: When set to Yes, outgoing calls are restricted.
䢇 Incoming: When set to Yes, incoming calls are restricted.
䢇 Contacts: When set to Yes, all access to your Contacts List
is restricted (including speed dialing).
Note: The default restriction settings are all No.
Section 13: Setup
193
Section 13
Restriction allows you to restrict outgoing calls,
incoming calls, and all access to your Contacts.
4. Use the navigation keys to highlight the Restriction you
want, then press OK . The following options appear in
the display:
䢇
䢇
No — Unrestricted
Yes — Restricted
5. Use the navigation keys to highlight Yes or No, then
press OK .
Section 13
Erase Memory
Erase memory erases your Contacts and Photo Gallery.
This feature is useful if you want to give your phone to
a friend or family member.
1. In standby mode, press the MENU (left) soft key (
then press 9wxyz (for Setup) and 5 jkl for Security.
The Lock prompt appears in the display.
2. Enter the four-digit lock code using the keypad.
Note: The default lock code is the last four digits of your mobile phone
number.
The Lock prompt disappears and the Security menu
appears in the display.
3. Press 6 for Erase Memory. A confirmation prompt
appears in the display.
mno
4. Use the navigation keys to highlight Yes or No, then
press OK . A confirmation message appears in the
display while your messages are being erased. Your
phone then returns to the Security menu.
194
),
Call Options
Reset Phone
Reset Phone returns all setup options to their factory
default.
1. In standby mode, press the MENU (left) soft key (
then press 9wxyz (for Setup) and 5 jkl for Security.
),
The Lock prompt appears in the display.
2. Enter the four-digit lock code using the keypad.
Note: The default lock code is the last four digits of your mobile phone
number.
3. Press 7pqrs for Reset Phone. A prompt appears in the
display to restore default settings (except for Contacts
and Voice Dial).
4. Use the navigation keys to highlight Yes or No, then
press OK .
Call Options
The Call Options sub menu lets you set call options
such as Auto Retry, Data rates for data calls, and more.
Auto Retry
Auto Retry automatically re-dials a number if there is
no answer or the dialed party is busy. Depending upon
your location, the number of times your phone redials a
number may vary.
Section 13: Setup
195
Section 13
The Lock prompt disappears and the Security menu
appears in the display.
1. In standby mode, press the MENU (left) soft key (
),
then press 9wxyz (for Setup), 6 (for Call Options), and
1 for Auto Retry. The following options appear in the
display:
mno
@
䢇
䢇
䢇
䢇
))
Off
Every 10 sec
Every 30 sec
Every 60 sec
Section 13
2. Use the navigation keys to highlight the desired setting,
then press OK .
Data
Use the Data sub menu to set your phone to detect data
connections automatically and to set the speed at which
data is transmitted (baud rate).
1. In standby mode, press the left soft key (
), then press
9wxyz (for Setup), 6 (for Call Options), and 2 abc for
Data. The following options appear in the display:
mno
䢇
䢇
Auto Detect — Set data auto detect capabilities. Options are:
Data off, Data for next call, and Data until powered off.
Baud Rate — Set the baud rate for data connections. Options
are: Auto, 19200, 38400, 57600, 115200, and 230400.
2. Use the navigation keys to highlight Auto Detect or
Baud Rate, then press OK . The selected sub menu
options appear in the display.
3. Use the navigation keys to highlight the desired Auto
Detect or Baud Rate setting, then press OK .
196
Call Options
Call Answer
You can select a specific answer mode when you
receive an incoming call. Your phone can be preset to
answer when you do any of the following:
1. In standby mode, press the MENU (left) soft key (
),
then press 9wxyz (for Setup), 6 (for Call Options), and
3def for Call Answer. The following Call Answer sub
menus appear in the display:
mno
䢇
䢇
2. Use the navigation keys to highlight the method you
wish to use for answering calls, then press OK .
Auto Answer
Auto Answer enables your phone to automatically
answer calls after a period of time that you specify.
1. In standby mode, press the MENU (left) soft key (
),
then press 9wxyz (for Setup), 6 (for Call Options), and
4 for Auto Answer. The following options appear in
the display:
mno
ghi
䢇
䢇
䢇
䢇
Off
After 5 sec
After 3 sec
After 1 sec
2. Use the navigation keys to highlight the desired setting,
then press OK .
Section 13: Setup
197
Section 13
䢇
Send Key — Press SEND to answer an incoming call.
Folder Open — Open the folder to answer an incoming call.
Any Key — Press any key except END or to answer an
incoming call.
TTY Mode
Your phone is fully Teletypewriter (TTY)/
Telecommunication Device for the Deaf (TDD)
compatible. You connect TTY/TDD equipment to the
headset connector on the top of your phone, behind the
folder hinge.
Note: TTY Mode must be enabled (TTY Full selected) before you can use
your phone with TTY/TDD equipment.
Section 13
1. In standby mode, press the MENU (left) soft key (
),
then press 9wxyz (for Setup), 6 (for Call Options), and
5 jkl for TTY Mode. The following options appear in the
display:
mno
䢇
䢇
TTY Full — Enabled.
TTY OFF — Disabled.
Note: The TTY Mode option has no effect on the phone’s earpiece,
microphone, or speaker. When you select TTY Full, all currently enabled
sound functions remain enabled.
2. Use the navigation keys to highlight your selection and
press OK . You’re returned to the previous menu and the
TTY icon (
) appears in the top of the display.
Airplane Mode
When set to On, Airplane Mode disables all radio
functions of your phone. This prevents you from
making or receiving calls, but allows you to use other
features (such as the camera and the Tools) safely in
sensitive environments, such as on board an aircraft.
1. In standby mode, press the MENU (left) soft key (
),
then press 9wxyz (for Setup), 6 (for Call Options), and
mno
198
Shortcut Setting
6 for Airplane Mode.The following options appear in
the display:
mno
䢇
䢇
Off — Enables the radio transmitter and receiver in your
phone.
On — Disables the radio transmitter and receiver in your
phone.
2. Use the navigation keys to highlight the desired option,
then press the OK key to save your setting.
IMPORTANT! With Airplane Mode set to On, you CANNOT make
emergency (that is, 911) calls.
Section 13
Shortcut Setting
The Up navigation key can be customized to launch
any one of numerous applications or functions from
standby mode. Use the Shortcut sub menu to choose
the application that you wish the navigation up key to
launch.
1. In standby mode, press the MENU (left) soft key (
),
then press 9wxyz (for Setup) and 7pqrs for Shortcut. The
following functions appear in the display:
䢇
䢇
䢇
䢇
䢇
䢇
䢇
䢇
Scheduler
Voice Memo
Animation
Ringer Type
Picture Gallery
Alarm
Calculator
Memo Pad
Section 13: Setup
199
2. Use the navigation keys to highlight the desired function,
then press OK .
You can now press the Up navigation key in standby
mode to launch the selected function.
Language Setting
The language option changes the language of menus,
sub menus, and other user-interface features.
Section 13
1. In standby mode, press the MENU (left) soft key (
),
then press 9wxyz (for Setup) and 8 for Language.The
following options appear in the display:
tuv
䢇
䢇
English
Spanish
2. Use the navigation keys to highlight your language
preference, then press OK .
Clock Set
Use the Clock Set option to set the current date and time.
Note: In digital service mode, the Main Clock feature is disabled. The
network adjusts time and date automatically.
1. In standby mode, press the MENU (left) soft key (
),
then press 9wxyz (for Setup) and 9wxyz for Clock Set.
The Main Clock screen appears in the display.
200
Version Information
2. Enter the current time and date using your keypad:
䢇
䢇
䢇
Use the Left and Right navigation keys to select am or pm.
The hour, minute, month, and day must be entered using two
digits each. You must enter the hour in 12-hour format.
The year must be entered with all four digits.
3. Press
OK
to save the time and date.
Version Information
Section 13
You can view the PRL (Preferred Roaming List),
software version, and hardware version on your
phone. This feature is helpful if you need to contact
Customer Service.
1. In standby mode, press the MENU (left) soft key (
),
then press 9wxyz (for Setup) and press 0 for Version.
Hardware and software information for your phone
appears in the display.
2. Press
OK
to return to the Setup menu.
Section 13: Setup
201
202
Section 13
Section 14: Health and Safety
Information
Topics Covered
• Health and Safety Information
This section outlines the safety precautions
associated with using your phone. These safety
precautions should be followed to safely use your
phone.
Section 14
Section 14: Health and Safety Information
203
Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
Section 14
Your wireless phone is a radio transmitter and receiver.
It is designed and manufactured not to exceed the
exposure limits for radio frequency (RF) energy set by
the Federal Communications Commission (FCC) of the
U.S. government. These FCC exposure limits are
derived from the recommendations of two expert
organizations, the National Counsel on Radiation
Protection and Measurement (NCRP) and the Institute
of Electrical and Electronics Engineers (IEEE). In both
cases, the recommendations were developed by
scientific and engineering experts drawn from industry,
government, and academia after extensive reviews of
the scientific literature related to the biological effects of
RF energy.
The exposure limit set by the FCC for wireless mobile
phones employs a unit of measurement known as the
Specific Absorption Rate (SAR). The SAR is a measure
of the rate of absorption of RF energy by the human
body expressed in units of watts per kilogram (W/kg).
The FCC requires wireless phones to comply with a
safety limit of 1.6 watts per kilogram (1.6 W/kg). The
FCC exposure limit incorporates a substantial margin
of safety to give additional protection to the public and
to account for any variations in measurements.
SAR tests are conducted using standard operating
positions accepted by the FCC with the phone
transmitting at its highest certified power level in all
204
Health and Safety Information
tested frequency bands. Although the SAR is
determined at the highest certified power level, the
actual SAR level of the phone while operating can be
well below the maximum value. This is because the
phone is designed to operate at multiple power levels
so as to use only the power required to reach the
network. In general, the closer you are to a wireless
base station antenna, the lower the power output.
The FCC has granted an Equipment Authorization for
this mobile phone with all reported SAR levels
evaluated as in compliance with the FCC RF exposure
guidelines. The maximum SAR values for this model
phone as reported to the FCC are:
• Head: 1.45 W/Kg.
• Body-worn: . 1.02 W/Kg.
SAR information on this and other model phones can
be viewed on-line at www.fcc.gov/oet/fccid. To find
information that pertains to a particular model phone,
this site uses the phone FCC ID number which is
Section 14: Health and Safety Information
205
Section 14
Before a new model phone is available for sale to the
public, it must be tested and certified to the FCC that it
does not exceed the exposure limit established by the
FCC. Tests for each model phone are performed in
positions and locations (e.g. at the ear and worn on the
body) as required by the FCC. For body worn
operation, this phone has been tested and meets FCC
RF exposure guidelines when used with an accessory
that contains no metal and that positions the handset a
minimum of 1.5 cm from the body. Use of other
accessories may not ensure compliance with FCC RF
exposure guidelines.
usually printed somewhere on the case of the phone.
Sometimes it may be necessary to remove the battery
pack to find the number. Once you have the FCC ID
number for a particular phone, follow the instructions
on the website and it should provide values for typical
or maximum SAR for a particular phone. Additional
product specific SAR information can also be obtained
at www.fcc.gov/cgb/sar.
UL Certified Travel Adapter
The Travel Adapter for this phone has met UL 1310
safety requirements. Please adhere to the following
safety instructions per UL guidelines.
Section 14
FAILURE TO FOLLOW THE INSTRUCTIONS
OUTLINED MAY LEAD TO SERIOUS PERSONAL
INJURY AND POSSIBLE PROPERTY DAMAGE
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE
INSTRUCTIONS. DANGER - TO REDUCE THE RISK
OF FIRE OR ELECTRIC SHOCK, CAREFULLY
FOLLOW THESE INSTRUCTIONS.
FOR CONNECTION TO A SUPPLY NOT IN THE
U.S.A., USE AN ATTACHMENT PLUG ADAPTOR OF
THE PROPER CONFIGURATION FOR THE POWER
OUTLET.
206
Consumer Information on Wireless Phones
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has
published a series of Questions and Answers for
consumers relating to radio frequency (RF) exposure
from wireless phones. The FDA publication includes
the following information:
What kinds of phones are the subject of this update?
Do wireless phones pose a health hazard?
The available scientific evidence does not show that
any health problems are associated with using wireless
phones. There is no proof, however, that wireless
phones are absolutely safe. Wireless phones emit low
Section 14: Health and Safety Information
207
Section 14
The term wireless phone refers here to hand-held
wireless phones with built-in antennas, often called
"cell," "mobile," or "PCS" phones. These types of
wireless phones can expose the user to measurable
radio frequency energy (RF) because of the short
distance between the phone and the user's head. These
RF exposures are limited by Federal Communications
Commission safety guidelines that were developed
with the advice of FDA and other federal health and
safety agencies. When the phone is located at greater
distances from the user, the exposure to RF is
drastically lower because a person's RF exposure
decreases rapidly with increasing distance from the
source. The so-called "cordless phones," which have a
base unit connected to the telephone wiring in a house,
typically operate at far lower power levels, and thus
produce RF exposures well within the FCC's
compliance limits.
levels of radio frequency energy (RF) in the microwave
range while being used. They also emit very low levels
of RF when in the stand-by mode. Whereas high levels
of RF can produce health effects (by heating tissue),
exposure to low level RF that does not produce heating
effects causes no known adverse health effects. Many
studies of low level RF exposures have not found any
biological effects. Some studies have suggested that
some biological effects may occur, but such findings
have not been confirmed by additional research. In
some cases, other researchers have had difficulty in
reproducing those studies, or in determining the
reasons for inconsistent results.
Section 14
What is FDA's role concerning the safety of wireless
phones?
Under the law, FDA does not review the safety of
radiation-emitting consumer products such as wireless
phones before they can be sold, as it does with new
drugs or medical devices. However, the agency has
authority to take action if wireless phones are shown to
emit radio frequency energy (RF) at a level that is
hazardous to the user. In such a case, FDA could
require the manufacturers of wireless phones to notify
users of the health hazard and to repair, replace or
recall the phones so that the hazard no longer exists.
Although the existing scientific data do not justify FDA
regulatory actions, FDA has urged the wireless phone
industry to take a number of steps, including the
following:
• "Support needed research into possible biological effects of RF
of the type emitted by wireless phones;
208
Consumer Information on Wireless Phones
• "Design wireless phones in a way that minimizes any RF
exposure to the user that is not necessary for device function;
and
• "Cooperate in providing users of wireless phones with the best
possible information on possible effects of wireless phone use
on human health.
FDA belongs to an interagency working group of the
federal agencies that have responsibility for different
aspects of RF safety to ensure coordinated efforts at the
federal level. The following agencies belong to this
working group:
• "National Institute for Occupational Safety and Health
• "Environmental Protection Agency
• "Federal Communications Commission
• "Occupational Safety and Health Administration
• "National Telecommunications and Information Administration
The National Institutes of Health participates in some
interagency working group activities, as well.
FCC also regulates the base stations that the wireless
phone networks rely upon. While these base stations
operate at higher power than do the wireless phones
themselves, the RF exposures that people get from
these base stations are typically thousands of times
lower than those they can get from wireless phones.
Section 14: Health and Safety Information
209
Section 14
FDA shares regulatory responsibilities for wireless
phones with the Federal Communications Commission
(FCC). All phones that are sold in the United States
must comply with FCC safety guidelines that limit RF
exposure. FCC relies on FDA and other health
agencies for safety questions about wireless phones.
Base stations are thus not the primary subject of the
safety questions discussed in this document.
Section 14
What are the results of the research done already?
The research done thus far has produced conflicting
results, and many studies have suffered from flaws in
their research methods. Animal experiments
investigating the effects of radio frequency energy (RF)
exposures characteristic of wireless phones have
yielded conflicting results that often cannot be repeated
in other laboratories. A few animal studies, however,
have suggested that low levels of RF could accelerate
the development of cancer in laboratory animals.
However, many of the studies that showed increased
tumor development used animals that had been
genetically engineered or treated with cancer-causing
chemicals so as to be pre-disposed to develop cancer in
absence of RF exposure. Other studies exposed the
animals to RF for up to 22 hours per day. These
conditions are not similar to the conditions under
which people use wireless phones, so we don't know
with certainty what the results of such studies mean for
human health.
Three large epidemiology studies have been published
since December 2000. Between them, the studies
investigated any possible association between the use
of wireless phones and primary brain cancer, glioma,
meningioma, or acoustic neuroma, tumors of the brain
or salivary gland, leukemia, or other cancers. None of
the studies demonstrated the existence of any harmful
health effects from wireless phones RF exposures.
However, none of the studies can answer questions
210
Consumer Information on Wireless Phones
about long-term exposures, since the average period of
phone use in these studies was around three years.
What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
What is FDA doing to find out more about the possible
health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology
Program and with groups of investigators around the
world to ensure that high priority animal studies are
conducted to address important questions about the
effects of exposure to radio frequency energy (RF).
Section 14: Health and Safety Information
211
Section 14
A combination of laboratory studies and
epidemiological studies of people actually using
wireless phones would provide some of the data that
are needed. Lifetime animal exposure studies could be
completed in a few years. However, very large
numbers of animals would be needed to provide
reliable proof of a cancer promoting effect if one exists.
Epidemiological studies can provide data that is
directly applicable to human populations, but ten or
more years' follow-up may be needed to provide
answers about some health effects, such as cancer. This
is because the interval between the time of exposure to
a cancer-causing agent and the time tumors develop - if
they do - may be many, many years. The interpretation
of epidemiological studies is hampered by difficulties
in measuring actual RF exposure during day-to-day
use of wireless phones. Many factors affect this
measurement, such as the angle at which the phone is
held, or which model of phone is used.
Section 14
FDA has been a leading participant in the World Health
Organization international Electromagnetic Fields
(EMF) Project since its inception in 1996. An influential
result of this work has been the development of a
detailed agenda of research needs that has driven the
establishment of new research programs around the
world. The Project has also helped develop a series of
public information documents on EMF issues.
FDA and Cellular Telecommunications & Internet
Association (CTIA) have a formal Cooperative
Research and Development Agreement (CRADA) to do
research on wireless phone safety. FDA provides the
scientific oversight, obtaining input from experts in
government, industry, and academic organizations.
CTIA-funded research is conducted through contracts
to independent investigators. The initial research will
include both laboratory studies and studies of wireless
phone users. The CRADA will also include a broad
assessment of additional research needs in the context
of the latest research developments around the world.
What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products - and at this point
we do not know that there is - it is probably very small.
But if you are concerned about avoiding even potential
risks, you can take a few simple steps to minimize your
exposure to radio frequency energy (RF). Since time is
a key factor in how much exposure a person receives,
reducing the amount of time spent using a wireless
phone will reduce RF exposure.
212
Consumer Information on Wireless Phones
• "If you must conduct extended conversations by wireless phone
every day, you could place more distance between your body
and the source of the RF, since the exposure level drops off
dramatically with distance. For example, you could use a
headset and carry the wireless phone away from your body or
use a wireless phone connected to a remote antenna.
Again, the scientific data do not demonstrate that
wireless phones are harmful. But if you are concerned
about the RF exposure from these products, you can
use measures like those described above to reduce your
RF exposure from wireless phone use.
What about children using wireless phones?
Some groups sponsored by other national
governments have advised that children be
discouraged from using wireless phones at all. For
example, the government in the United Kingdom
distributed leaflets containing such a recommendation
in December 2000. They noted that no evidence exists
that using a wireless phone causes brain tumors or
other ill effects. Their recommendation to limit wireless
phone use by children was strictly precautionary; it was
not based on scientific evidence that any health hazard
exists.
Section 14: Health and Safety Information
213
Section 14
The scientific evidence does not show a danger to users
of wireless phones, including children and teenagers. If
you want to take steps to lower exposure to radio
frequency energy (RF), the measures described above
would apply to children and teenagers using wireless
phones. Reducing the time of wireless phone use and
increasing the distance between the user and the RF
source will reduce RF exposure.
Do hands-free kits for wireless phones reduce risks from
exposure to RF emissions?
Section 14
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
believe that hands-free kits reduce risks. Hands-free
kits can be used with wireless phones for convenience
and comfort. These systems reduce the absorption of
RF energy in the head because the phone, which is the
source of the RF emissions, will not be placed against
the head. On the other hand, if the phone is mounted
against the waist or other part of the body during use,
then that part of the body will absorb more RF energy.
Wireless phones marketed in the U.S. are required to
meet safety requirements regardless of whether they
are used against the head or against the body. Either
configuration should result in compliance with the
safety limit.
Do wireless phone accessories that claim to shield the
head from RF radiation work?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
believe that accessories that claim to shield the head
from those emissions reduce risks. Some products that
claim to shield the user from RF absorption use special
phone cases, while others involve nothing more than a
metallic accessory attached to the phone. Studies have
shown that these products generally do not work as
advertised. Unlike "hand-free" kits, these so-called
"shields" may interfere with proper operation of the
phone. The phone may be forced to boost its power to
compensate, leading to an increase in RF absorption. In
214
Consumer Information on Wireless Phones
February 2002, the Federal trade Commission (FTC)
charged two companies that sold devices that claimed
to protect wireless phone users from radiation with
making false and unsubstantiated claims. According to
FTC, these defendants lacked a reasonable basis to
substantiate their claim.
What about wireless phone interference with medical
equipment?
FDA continues to monitor the use of wireless phones
for possible interactions with other medical devices.
Section 14: Health and Safety Information
215
Section 14
Radio frequency energy (RF) from wireless phones can
interact with some electronic devices. For this reason,
FDA helped develop a detailed test method to measure
electromagnetic interference (EMI) of implanted cardiac
pacemakers and defibrillators from wireless
telephones. This test method is now part of a standard
sponsored by the Association for the Advancement of
Medical instrumentation (AAMI). The final draft, a
joint effort by FDA, medical device manufacturers, and
many other groups, was completed in late 2000. This
standard will allow manufacturers to ensure that
cardiac pacemakers and defibrillators are safe from
wireless phone EMI. FDA has tested wireless phones
and helped develop a voluntary standard sponsored
by the Institute of Electrical and Electronic Engineers
(IEEE). This standard specifies test methods and
performance requirements for hearing aids and
wireless phones so that no interference occurs when a
person uses a compatible phone and a compatible
hearing aid at the same time. This standard was
approved by the IEEE in 2000.
Should harmful interference be found to occur, FDA
will conduct testing to assess the interference and work
to resolve the problem.
Additional information on the safety of RF exposures
from various sources can be obtained from the
following organizations:
• FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
• Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
• Occupational Safety and Health Administration's (OSHA):
http://www.osha.gov/SLTC/radiofrequencyradiation/
index.html
• National institute for Occupational Safety and Health (NIOSH):
http://www.cdc.gov/niosh/topics/emf/
• World health Organization (WHO):
http://www.who.int/peh-emf/
• International Commission on Non-Ionizing Radiation Protection:
Section 14
http://www.icnirp.de
• National Radiation Protection Board (UK):
http://www.nrpb.org.uk
• US food and Drug Administration
http://www.fda.gov/cellphones
Road Safety
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime. But
an important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
216
Road Safety
When driving a car, driving is your first responsibility.
When using your wireless phone behind the wheel of a
car, practice good common sense and remember the
following tips:
1. Get to know your wireless phone and its features, such
as speed dial and redial. If available, these features help
you to place your call without taking your attention off
the road.
2. When available, use a hands-free device. If possible, add
an additional layer of convenience and safety to your
wireless phone with one of the many hands free
accessories available today.
3. Position your wireless phone within easy reach. Be able
to access your wireless phone without removing your
eyes from the road. If you get an incoming call at an
inconvenient time, let your voice mail answer it for you.
5. Do not take notes or look up phone numbers while
driving. Jotting down a "to do" list or flipping through
your address book takes attention away from your
primary responsibility, driving safely.
6. Dial sensibly and assess the traffic; if possible, place
calls when you are not moving or before pulling into
traffic. Try to plan calls when your car will be stationary.
If you need to make a call while moving, dial only a few
numbers, check the road and your mirrors, then
continue.
Section 14: Health and Safety Information
217
Section 14
4. Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy traffic or
hazardous weather conditions. Rain, sleet, snow, ice
and even heavy traffic can be hazardous.
7. Do not engage in stressful or emotional conversations
that may be distracting. Make people you are talking
with aware you are driving and suspend conversations
that have the potential to divert your attention from the
road.
8. Use your wireless phone to call for help. Dial 9-1-1 or
other local emergeny number in the case of fire, traffic
accident or medical emergencies. Remember, it is a free
call on your wireless phone!
Section 14
9. Use your wireless phone to help others in emergencies. If
you see an auto accident, crime in progress or other
serious emergency where lives are in danger, call 9-1-1
or other local emergency number, as you would want
others to do for you.
10. Call roadside assistance or a special non-emergency
wireless assistance number when necessary. If you see
a broken-down vehicle posing no serious hazard, a
broken traffic signal, a minor traffic accident where no
one appears injured, or a vehicle you know to be stolen,
call roadside assistance or other special non-emergency
number.
"The wireless industry reminds you to use your phone safely
when driving."
For more information, please call 1-888-901-SAFE, or
visit our web-site www.wow-com.com
Provided by the Cellular Telecommunications &
Internet Association
218
Operating Environment
Operating Environment
Remember to follow any special regulations in force in
any area and always switch your phone off whenever it
is forbidden to use it, or when it may cause interference
or danger. When connecting the phone or any accessory
to another device, read its user's guide for detailed
safety instructions. Do not connect incompatible
products.
As with other mobile radio transmitting equipment,
users are advised that for the satisfactory operation of
the equipment and for the safety of personnel, it is
recommended that the equipment should only be used
in the normal operating position (held to your ear with
the antenna pointing over your shoulder if you are
using an external antenna).
Using Your Phone Near Other Electronic Devices
Pacemakers
Pacemaker manufacturers recommend that a minimum
distance of 15 cm (6 inches) be maintained between a
wireless phone and a pacemaker to avoid potential
interference with the pacemaker.
Section 14: Health and Safety Information
219
Section 14
Most modern electronic equipment is shielded from
radio frequency (RF) signals. However, certain
electronic equipment may not be shielded against the
RF signals from your wireless phone. Consult the
manufacturer to discuss alternatives.
These recommendations are consistent with the
independent research and recommendations of
Wireless Technology Research.
Persons with pacemakers:
• should always keep the phone more than 15 cm (6 inches) from
their pacemaker when the phone is switched on.
• should not carry the phone in a breast pocket.
• should use the ear opposite the pacemaker to minimize
potential interference.
If you have any reason to suspect that interference is
taking place, switch your phone off immediately.
Section 14
Hearing Aid Compatibility with Mobile Phones
When some mobile phones are used near some hearing
devices (hearing aids and cochlear implants), users may
detect a buzzing, humming, or whining noise. Some
hearing devices are more immune than others to this
interference noise, and phones also vary in the amount
of interference they generate.
The wireless telephone industry has developed ratings
for some of their mobile phones, to assist hearing
device users in finding phones that may be compatible
with their hearing devices. Not all phones have been
rated. Phones that are rated have the rating on their box
or a label on the box.
The ratings are not guarantees. Results will vary
depending on the user’s hearing device and hearing
loss. If your hearing device happens to be vulnerable to
interference, you may not be able to use a rated phone
successfully. Trying out the phone with your hearing
220
Using Your Phone Near Other Electronic Devices
device is the best way to evaluate it for your personal
needs.
M-Ratings: Phones rated M3 or M4 meet FCC
requirements and are likely to generate less interference
to hearing devices than phones that are not labeled. M4
is the better/higher of the two ratings.
T-Ratings: Phones rated T3 or T4 meet FCC
requirements and are likely to be more usable with a
hearing device’s telecoil (“T Switch” or “Telephone
Switch”) than unrated phones. T4 is the better/higher
of the two ratings. (Note that not all hearing devices
have telecoils in them.)
Hearing devices may also be measured for immunity to
this type of interference. Your hearing device
manufacturer or hearing health professional may help
you find results for your hearing device. The more
immune your hearing aid is, the less likely you are to
experience interference noise from mobile phones.
If you use any other personal medical devices, consult
the manufacturer of your device to determine if it is
adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this
information. Switch your phone off in health care
facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care facilities
may be using equipment that could be sensitive to
external RF energy.
Section 14: Health and Safety Information
221
Section 14
Other Medical Devices
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle. You should also
consult the manufacturer of any equipment that has
been added to your vehicle.
Posted Facilities
Switch your phone off in any facility where posted
notices requireyou to do so.
Section 14
Potentially Explosive Environments
Switch your phone off when in any area with a
potentially explosive atmosphere and obey all signs
and instructions. Sparks in such areas could cause an
explosion or fire resulting in bodily injury or even
death.
Users are advised to switch the phone off while at a
refueling point (service station). Users are reminded of
the need to observe restrictions on the use of radio
equipment in fuel depots (fuel storage and distribution
areas), chemical plants or where blasting operations are
in progress.
Areas with a potentially explosive atmosphere are often
but not always clearly marked. They include below
deck on boats, chemical transfer or storage facilities,
vehicles using liquefied petroleum gas (such as
propane or butane), areas where the air contains
chemicals or particles, such as grain, dust or metal
222
Emergency Calls
powders, and any other area where you would
normally be advised to turn off your vehicle engine.
Emergency Calls
This phone, like any wireless phone, operates using
radio signals, wireless and landline networks as well as
user-programmed functions, which cannot guarantee
connection in all conditions. Therefore, you should
never rely solely on any wireless phone for essential
communications (medical emergencies, for example).
Remember, to make or receive any calls the phone must
be switched on and in a service area with adequate
signal strength. Emergency calls may not be possible on
all wireless phone networks or when certain network
services and/or phone features are in use. Check with
local service providers.
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present location
(for example, 911 or other official emergency number).
Emergency numbers vary by location.
3. Press the
SEND
key.
If certain features are in use (call barring, for example),
you may first need to deactivate those features before
you can make an emergency call. Consult this
document and your local cellular service provider.
Section 14: Health and Safety Information
223
Section 14
To make an emergency call:
When making an emergency call, remember to give all
the necessary information as accurately as possible.
Remember that your phone may be the only means of
communication at the scene of an accident; do not cut
off the call until given permission to do so.
Restricting Children's access to your Phone
Your phone is not a toy. Children should not be
allowed to play with it because they could hurt
themselves and others, damage the phone or make calls
that increase your phone bill.
FCC Notice and Cautions
Section 14
FCC Notice
The phone may cause TV or radio interference if used
in close proximity to receiving equipment. The FCC can
require you to stop using the phone if such interference
cannot be eliminated.
Vehicles using liquefied petroleum gas (such as
propane or butane) must comply with the National Fire
Protection Standard (NFPA-58). For a copy of this
standard, contact the National Fire Protection
Association, One Batterymarch Park, Quincy, MA
02269, Attn: Publication Sales Division.
Cautions
Any changes or modifications to your phone not
expressly approved in this document could void your
warranty for this equipment, and void your authority
to operate this equipment. Only use approved batteries,
224
Other Important Safety Information
antennas and chargers. The use of any unauthorized
accessories may be dangerous and void the phone
warranty if said accessories cause damage or a defect to
the phone.
Although your phone is quite sturdy, it is a complex
piece of equipment and can be broken. Avoid dropping,
hitting, bending or sitting on it.
Other Important Safety Information
• Only qualified personnel should service the phone or install the
phone in a vehicle. Faulty installation or service may be
dangerous and may invalidate any warranty applicable to the
device.
• Check regularly that all wireless phone equipment in your
vehicle is mounted and operating properly.
• Do not store or carry flammable liquids, gases or explosive
materials in the same compartment as the phone, its parts or
accessories.
bag inflates with great force. Do not place objects, including
both installed or portable wireless equipment in the area over
the air bag or in the air bag deployment area. If wireless
equipment is improperly installed and the air bag inflates,
serious injury could result.
• Switch your phone off before boarding an aircraft. The use of
wireless phone in aircraft is illegal and may be dangerous to
the aircraft's operation.
• Failure to observe these instructions may lead to the
suspension or denial of telephone services to the offender, or
legal action, or both.
Product Performance
Section 14: Health and Safety Information
225
Section 14
• For vehicles equipped with an air bag, remember that an air
Getting the Most Out of Your Signal Reception
The quality of each call you make or receive depends
on the signal strength in your area. Your phone informs
you of the current signal strength by displaying a
number of bars next to the signal strength icon. The
more bars displayed, the stronger the signal.
If you're inside a building, being near a window may
give you better reception.
Understanding the Power Save Feature
If your phone is unable to find a signal after 15 minutes
of searching, a Power Save feature is automatically
activated. If your phone is active, it periodically
rechecks service availability or you can check it yourself
by pressing any key.
Section 14
Anytime the Power Save feature is activated, a message
displays on the screen. When a signal is found, your
phone returns to standby mode.
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver.
When it's turned on, it receives and transmits radio
frequency (RF) signals. When you use your phone, the
system handling your call controls the power level.
This power can range from 0.006 watts to 0.2 watts in
digital mode.
Maintaining Your Phone's Peak Performance
For the best care of your phone, only authorized
personnel should service your phone and accessories.
Faulty service may void the warranty.
226
Availability of Various Features/Ring Tones
There are several simple guidelines to operating your
phone properly and maintaining safe, satisfactory
service.
• If your phone is equipped with an external antenna, hold the
phone with the antenna raised, fully-extended and over your
shoulder.
• Do not hold, bend or twist the phone's antenna.
• Do not use the phone if the antenna is damaged.
• If your phone is equipped with an internal antenna, obstructing
the internal antenna could inhibit performance.
• Speak directly into the phone's receiver.
• Avoid exposing your phone and accessories to rain or liquid
spills. If your phone does get wet, immediately turn the power
off and remove the battery.
Availability of Various Features/Ring Tones
Battery Standby and Talk Time
Standby and talk times will vary depending on phone
usage patterns and conditions. Battery power
consumption depends on factors such as network
configuration, signal strength, operating temperature,
Section 14: Health and Safety Information
227
Section 14
Many services and features are network dependent
and may require additional subscription and/or usage
charges. Not all features are available for purchase or
use in all areas. Downloadable Ring Tones may be
available at an additional cost. Other conditions and
restrictions may apply. See your service provider for
additional information.
features selected, frequency of calls, and voice, data,
and other application usage patterns.
Battery Precautions
• Avoid dropping the cell phone. Dropping it, especially on a hard
surface, can potentially cause damage to the phone and
battery. If you suspect damage to the phone or battery, take it
to a service center for inspection.
• Never use any charger or battery that is damaged in any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network's base station, it uses
less power; talk and standby time are greatly affected by the
signal strength on the cellular network and the parameters set
by the network operator.
• Follow battery usage, storage and charging guidelines found in
the user’s guide.
• Battery charging time depends on the remaining battery charge
Section 14
and the type of battery and charger used. The battery can be
charged and discharged hundreds of times, but it will gradually
wear out. When the operation time (talk time and standby time)
is noticeably shorter than normal, it is time to buy a new
battery.
• If left unused, a fully charged battery will discharge itself over
time.
• Use only Samsung-approved batteries and recharge your
battery only with Samsung-approved chargers. When a charger
is not in use, disconnect it from the power source. Do not leave
the battery connected to a charger for more than a week, since
overcharging may shorten its life.
• Do not use incompatible cell phone batteries and chargers.
Some Web sites and second-hand dealers, not associated with
reputable manufacturers and carriers, might be selling
incompatible or even counterfeit batteries and chargers.
Consumers should purchase manufacturer or carrier
228
Battery Precautions
recommended products and accessories. If unsure about
whether a replacement battery or charger is compatible,
contact the manufacturer of the battery or charger.
• Extreme temperatures will affect the charging capacity of your
battery: it may require cooling or warming first.
• Do not leave the battery in hot or cold places, such as in a car in
summer or winter conditions, as you will reduce the capacity
and lifetime of the battery. Always try to keep the battery at
room temperature. A phone with a hot or cold battery may
temporarily not work, even when the battery is fully charged.
Li-ion batteries are particularly affected by temperatures below
0 °C (32 °F).
• Do not place the phone in areas that may get very hot, such as
on or near a cooking surface, cooking appliance, iron, or
radiator.
• Do not get your phone or battery wet. Even though they will dry
and appear to operate normally, the circuitry could slowly
corrode and pose a safety hazard.
• Do not short-circuit the battery. Accidental short- circuiting can
• Do not permit a battery out of the phone to come in contact
with metal objects, such as coins, keys or jewelry.
• Do not crush, puncture or put a high degree of pressure on the
battery as this can cause an internal short-circuit, resulting in
overheating.
• Dispose of used batteries in accordance with local regulations.
In some areas, the disposal of batteries in household or
business trash may be prohibited. For safe disposal options for
Li-Ion batteries, contact your nearest Samsung authorized
service center. Always recycle. Do not dispose of batteries in a
fire.
Section 14: Health and Safety Information
229
Section 14
occur when a metallic object (coin, clip or pen) causes a direct
connection between the + and - terminals of the battery (metal
strips on the battery), for example when you carry a spare
battery in a pocket or bag. Short-circuiting the terminals may
damage the battery or the object causing the short-circuiting.
Care and Maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for
many years
• Keep the phone and all its parts and accessories out of the
reach of small children's.
• Keep the phone dry. Precipitation, humidity and liquids contain
minerals that will corrode electronic circuits.
• Do not use the phone with a wet hand. Doing so may cause an
electric shock to you or damage to the phone.
• Do not use or store the phone in dusty, dirty areas, as its
moving parts may be damaged.
• Do not store the phone in hot areas. High temperatures can
shorten the life of electronic devices, damage batteries, and
warp or melt certain plastics.
• Do not store the phone in cold areas. When the phone warms
Section 14
up to its normal operating temperature, moisture can form
inside the phone, which may damage the phone's electronic
circuit boards.
• Do not drop, knock or shake the phone. Rough handling can
break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or strong
detergents to clean the phone. Wipe it with a soft cloth slightly
dampened in a mild soap-and-water solution.
• Do not paint the phone. Paint can clog the device's moving
parts and prevent proper operation.
• Do not put the phone in or on heating devices, such as a
microwave oven, a stove or a radiator. The phone may explode
when overheated.
• If your phone has an external antenna, use only the supplied or
an approved replacement antenna. Unauthorized antennas or
230
Care and Maintenance
modified accessories may damage the phone and violate
regulations governing radio devices.
• If the phone, battery, charger or any accessory is not working
properly, take it to your nearest qualified service facility. The
personnel there will assist you, and if necessary, arrange for
service.
Section 14
Section 14: Health and Safety Information
231
232
Section 14
Section 15: Warranty Information
Topics Covered
• Standard Limited Warranty
Section 15
Section 15: Warranty Information
233
Standard Limited Warranty
What is Covered and For How Long? SAMSUNG
TELECOMMUNICATIONS AMERICA, L.P.
(“SAMSUNG”) warrants to the original purchaser
(“Purchaser”) that SAMSUNG's Phones and accessories
(“Products”) are free from defects in material and
workmanship under normal use and service for the
period commencing upon the date of purchase and
continuing for the following specified period of time
after that date:
Section 15
Phone
Batteries
Leather Case/ Pouch
Holster
Other Phone Accessories
1 Year
1 Year
90 Days
90 Days
1 Year
What is Not Covered? This Limited Warranty is
conditioned upon proper use of Product by Purchaser.
This Limited Warranty does not cover: (a) defects or
damage resulting from accident, misuse, abuse, neglect,
unusual physical, electrical or electromechanical stress,
or modification of any part of Product, including
antenna, or cosmetic damage; (b) equipment that has
the serial number removed or made illegible; (c) any
plastic surfaces or other externally exposed parts that
are scratched or damaged due to normal use; (d)
malfunctions resulting from the use of Product in
conjunction with accessories, products, or ancillary/
peripheral equipment not furnished or approved by
234
Standard Limited Warranty
SAMSUNG; (e) defects or damage from improper
testing, operation, maintenance, installation, or
adjustment; (f) installation, maintenance, and service of
Product, or (g) Product used or purchased outside the
United States or Canada. This Limited Warranty covers
batteries only if battery capacity falls below 80% of
rated capacity or the battery leaks, and this Limited
Warranty does not cover any battery if (i) the battery
has been charged by a battery charger not specified or
approved by SAMSUNG for charging the battery, (ii)
any of the seals on the battery are broken or show
evidence of tampering, or (iii) the battery has been used
in equipment other than the SAMSUNG phone for
which it is specified.
Section 15: Warranty Information
235
Section 15
What are SAMSUNG's Obligations? During the applicable
warranty period, SAMSUNG will repair or replace, at
SAMSUNG's sole option, without charge to Purchaser,
any defective component part of Product. To obtain
service under this Limited Warranty, Purchaser must
return Product to an authorized phone service facility
in an adequate container for shipping, accompanied by
Purchaser's sales receipt or comparable substitute proof
of sale showing the date of purchase, the serial number
of Product and the sellers' name and address. To obtain
assistance on where to deliver the Product, call
Samsung Customer Care at 1-888-987-4357. Upon
receipt, SAMSUNG will promptly repair or replace the
defective Product. SAMSUNG may, at SAMSUNG's
sole option, use rebuilt, reconditioned, or new parts or
components when repairing any Product or replace
Product with a rebuilt, reconditioned or new Product.
Repaired/replaced leather cases, pouches and holsters
will be warranted for a period of ninety (90) days. All
other repaired/replaced Product will be warranted for
a period equal to the remainder of the original Limited
Warranty on the original Product or for 90 days,
whichever is longer. All replaced parts, components,
boards and equipment shall become the property of
SAMSUNG. If SAMSUNG determines that any Product
is not covered by this Limited Warranty, Purchaser
must pay all parts, shipping, and labor charges for the
repair or return of such Product.
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY?
EXCEPT AS SET FORTH IN THE EXPRESS
WARRANTY CONTAINED HEREIN, PURCHASER
TAKES THE PRODUCT “AS IS,” AND SAMSUNG
MAKES NO WARRANTY OR REPRESENTATION
AND THERE ARE NO CONDITIONS, EXPRESS OR
IMPLIED, STATUTORY OR OTHERWISE, OF ANY
KIND WHATSOEVER WITH RESPECT TO THE
PRODUCT, INCLUDING BUT NOT LIMITED TO:
• “THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS
FOR ANY PARTICULAR PURPOSE OR USE;
• “WARRANTIES OF TITLE OR NON-INFRINGEMENT;
• “DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE
PRODUCT;
• “THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
Section 15
CONTAINED THEREIN; OR
• “COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF
ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING
THERETO.
NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN
EXPRESS WARRANTY OF ANY KIND
236
Standard Limited Warranty
Section 15: Warranty Information
237
Section 15
WHATSOEVER WITH RESPECT TO THE PRODUCT.
ALL IMPLIED WARRANTIES AND CONDITIONS
THAT MAY ARISE BY OPERATION OF LAW,
INCLUDING IF APPLICABLE THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE
HEREBY LIMITED TO THE SAME DURATION OF
TIME AS THE EXPRESS WRITTEN WARRANTY
STATED HEREIN. SOME STATES/PROVINCES DO
NOT ALLOW LIMITATIONS ON HOW LONG AN
IMPLIED WARRANTY LASTS, SO THE ABOVE
LIMITATION MAY NOT APPLY TO YOU. IN
ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR
ANY DAMAGES OF ANY KIND RESULTING FROM
THE PURCHASE, USE, OR MISUSE OF, OR
INABILITY TO USE THE PRODUCT OR ARISING
DIRECTLY OR INDIRECTLY FROM THE USE OR
LOSS OF USE OF THE PRODUCT OR FROM THE
BREACH OF THE EXPRESS WARRANTY,
INCLUDING INCIDENTAL, SPECIAL,
CONSEQUENTIAL OR SIMILAR DAMAGES, OR
LOSS OF ANTICIPATED PROFITS OR BENEFITS, OR
FOR DAMAGES ARISING FROM ANY TORT
(INCLUDING NEGLIGENCE OR GROSS
NEGLIGENCE) OR FAULT COMMITTED BY
SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR
ANY BREACH OF CONTRACT OR FOR ANY CLAIM
BROUGHT AGAINST PURCHASER BY ANY OTHER
PARTY. SOME STATES/PROVINCES DO NOT
ALLOW THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO
THE ABOVE LIMITATION OR EXCLUSION MAY
Section 15
NOT APPLY TO YOU. THIS WARRANTY GIVES YOU
SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO
HAVE OTHER RIGHTS, WHICH VARY FROM STATE
TO STATE/PROVINCE TO PROVINCE. THIS
LIMITED WARRANTY SHALL NOT EXTEND TO
ANYONE OTHER THAN THE ORIGINAL
PURCHASER OF THIS PRODUCT AND STATES
PURCHASER'S EXCLUSIVE REMEDY. IF ANY
PORTION OF THIS LIMITED WARRANTY IS HELD
ILLEGAL OR UNENFORCEABLE BY REASON OF
ANY LAW, SUCH PARTIAL ILLEGALITY OR
UNENFORCEABILITY SHALL NOT AFFECT THE
ENFORCEABILITY FOR THE REMAINDER OF THIS
LIMITED WARRANTY WHICH PURCHASER
ACKNOWLEDGES IS AND WILL ALWAYS BE
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS
LIMITED AS THE LAW PERMITS. THE PARTIES
UNDERSTAND THAT THE PURCHASER MAY USE
THIRD-PARTY SOFTWARE OR EQUIPMENT IN
CONJUNCTION WITH THE PRODUCT. SAMSUNG
MAKES NO WARRANTIES OR REPRESENTATIONS
AND THERE ARE NO CONDITIONS, EXPRESS OR
IMPLIED, STATUTORY OR OTHERWISE, AS TO THE
QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE OR SUITABILITY OF ANY
THIRDPARTY SOFTWARE OR EQUIPMENT,
WHETHER SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT IS INCLUDED WITH THE PRODUCT
DISTRIBUTED BY SAMSUNG OR OTHERWISE,
INCLUDING THE ABILITY TO INTEGRATE ANY
SUCH SOFTWARE OR EQUIPMENT WITH THE
PRODUCT. THE QUALITY, CAPABILITIES,
238
Standard Limited Warranty
OPERATIONS, PERFORMANCE AND SUITABILITY
OF ANY SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT LIE SOLELY WITH THE PURCHASER
AND THE DIRECT VENDOR, OWNER OR SUPPLIER
OF SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT, AS THE CASE MAY BE.
This Limited Warranty allocates risk of Product failure
between Purchaser and SAMSUNG, and SAMSUNG's
Product pricing reflects this allocation of risk and the
limitations of liability contained in this Limited
Warranty. The agents, employees, distributors, and
dealers of SAMSUNG are not authorized to make
modifications to this Limited Warranty, or make
additional warranties binding on SAMSUNG.
Accordingly, additional statements such as dealer
advertising or presentation, whether oral or written, do
not constitute warranties by SAMSUNG and should
not be relied upon.
Samsung Telecommunications America, L.P.
1000 Klein Street
Plano, Texas 75074
Phone: 1-800-SAMSUNG
Phone: 1-888-987-HELP (4357)
©2006 Samsung Telecommunications America, L.P. All
rights reserved.
Printed in Korea
Section 15: Warranty Information
239
Section 15
No reproduction in whole or in part allowed without
prior written approval. Specifications and availability
subject to change without notice.
240
Section 15
Index
Auto retry 195
Axcess Web
How Axcess Web Keys
Work 122
Launching Axcess
Web 120
Using Axcess Web 121
Using Links 121
Symbols
@ Metro 91
Numerics
911 191
A
B
Add, edit, erase tasks 164
Adding a new Contacts
entry
Backlight settings 179
Banner 179
Banner, creating 179
Battery 12
Dial Method 73
charging 11
Low battery indicator 12
removal 13
Travel adapter 11
Adjust
color tone 144
key beep 184
ringer setting 32, 42
Alarm clock
set the alarm 169
turn off the alarm 170
when an alarm
sounds 170
Alerts 185
Animation 178
Animation, choosing 178
Apps
buying 94
disabled 95
expired 95
removing 94
restoring 95
Auto Answer 197
Auto hyphen 180
Brightness,
pictures 134, 142
Buying new apps 94
C
Calculator 172
Calendar
view an event 162
Call answer 43, 197
Call Answer mode 30
Call block 44
Call Functions
Answering a Call 41
Making a Call 36
Call notification types 42
Call options 195
241
Call restriction 193
Call timer 48
Call waiting 43
Caller ID 44
Calls
Clear key 24
Clock set 200
Color tones 144
Contacts 72
add pauses 80
Adding a new Contacts
entry 73
edit name and
numbers 79
find by entry 77
find by group 78
find by name 77
opening 72
rename a group 79
Save a number after a
call 86
call timer 48
data counter 49
erase logs 48
incoming 47
missed 47
outgoing 46
store numbers 50
Calls menu 46
Camera 129
Color Tones 136
Fun Frame 135
Multi Shot 133
Options 132
Picture Gallery 140
Save Pictures 140
Screen 131
Screen Icons 131
Self Timer 132
Settings 142
Taking Pictures 130
Camera mode 33
Camera Screen 131
Camera settings 142
Canned Message Text
Editing and Entering 116
Change languages 200
Change lock 190
Change menu style 177
242
Contacts List
Memory 89
Count down 167
Create messages 98
D
Data Counter 49
Data sub menu 196
Data, view counters 49
Delay pictures 132
Dial Digits 180
Dial Screen 181
Disabled apps 95
Display 176
Display screen icons 26
Display settings 176
animation 178
auto hyphen 180
backlight 179
banner 179
dial digits 180
dial screen 181
menu style 177
Display sub menu 176
Draft folder 110
Draft messages 110
E
easyedge
Help 93
Settings 92
Shopping and
downloading 92
Edit contacts name and
numbers 79
Edit text options 112
Emergency #s in lock
mode 192
Emergency numbers 191
End key 24
Entering Text 63
Erase total timers 49
Exit Mobile Web 121
Expired apps 95
F
Find
by entry 77
by group 78
by name 77
Find by entry 77
Fun frames 143
G
Gallery 123
Accessing 124
Animelody 127
Image 124
Melody 126
Gallery, picture 140
General message
settings 115
Getting Started 9
Activating Your Phone 12
Understanding this User
Manual 10
Voicemail 15
back one menu 52
Entering Numbers 68
Entering Symbols 67
Entering Upper and
Lower Case 66
Using T9 Mode 65
Erase logs 48
Go
GPS Setting 176
Groups, renaming 79
Erase memory 194
Erase memos 153
Erase messages 117
Hardware version,
viewing 201
Health and Safety
H
243
Information 203
I
Icons
number type 73, 74, 87
Ignore calls 44
Inbox folder 108
Incoming calls 41
Incoming calls menu 47
Input mode 30
Message send options 99
Message settings,
general 115
Messages and lock
mode 110
Messages, creating 98
Messages, receive in
call 101
Messaging 97
J
Types of Messages 98
Jump to date 163
K
Key beep 184
Missed calls menu 47
Mobile Web 119
Mode
call answer 30
camera 33
input 30
lock 31
silent 32
standby 31
talk 32
vibrate 32
L
Language setting 200
Left soft key 23
Lock code, changing 190
Lock mode 31
Lock phone 189
M
Menu Navigation 51
Menu Outline 54
Menu style, changing 177
Message folder
draft box 110
inbox 108
outbox 109
voice 113
voice mail 113
Message Folders
Erase messages 117
244
Msg setting sub menu 113
Multi shot 133
My phone # 88
N
Navigation key 25
Navigation key
shortcuts 53
Network sub menu 187
New message options 99
Notes and tips 10
Notes, description 10
Number type
icons 73, 74, 87
Q
O
Receive messages in
call 101
Receive pic. messages 106
Receive text messages 100
Record memos 152
Removing apps 94
Reset your phone 195
Resolution, notes
about 139
Restoring apps 95
Restrict calls 193
Return to last menu 52
Review calls 48
Reviewing outbox 109
Right soft key 24
Ringer types,
assigning 183
Roam ringer 186
OK key 24
Outbox folder 109
Outbox, reviewing
messages 109
Outgoing 46
P
P pause 80
Pause dial 36, 81
Pauses, adding 80
Picture borders 143
Picture gallery 140
Picture message
settings 114
Picture messages
online viewing 107
receiving 106
Send in camera
mode 101
Pictures
brightness 134, 142
color tones 144
fun frames 143
quality 146
sending 147
shutter sound 145
zooming in 139
Power On/Off sound 186
Quality, pictures 146
R
S
Save a number after a
call 86
Save pictures 140
Security sub menu 188
Self timer 132
Send key 25
Send options 99
245
Send pix messages 147
Service LED settings 182
Settings
Display 176
Location Setting 176
Settings, picture
messages 114
Settings, text
messages 114
Setup 175
Shortcut sub menu 199
Shortcut to menus 53
Shutter sound 145
Silence ringer 44
Silent mode
entering 32
exiting 32
Software version,
viewing 201
Sounds 183
Speakerphone Key 25
Standby mode 31
Store emergency #s 191
Store numbers after a
call 86
T
T pause 80
Take pictures
with flip open 130
Taking pictures 130
246
Talk mode 32
Text entry modes 98
Text message settings 114
Text messages,
receiving 100
Text Modes
changing 64
Three-way calling 36
Timer, calls 48
Timer, camera 132
Tip, description 10
To do list 163
add, edit, erase
tasks 164
Tools 149
add new event 160
alarm clock 169
calculator 172
count down 167
jump to date 163
memo pad 165
scheduler 162
to do list 163
today 160
voice recognition 150
world time 171
TTY Mode 198
U
Understanding Your
Contacts 71
Deleting a Contacts
entry 88
Editing an existing
Contacts entry 79
Finding a Contacts
entry 75
Understanding Your
Phone 17
Closed View of Your
Phone 19
Command Keys 23
Display Screen 26
Features of Your
Phone 18
Open View of Your
Phone 21
Sensitivity 157
Sound 158
Voice Launch 159
W
Warranty Information 233
Standard Limited
Warranty 234
Whisper mode 187
World time 171
Z
Zooming, pictures 139
V
Version 201
Vibrate mode 32
View an event,
scheduler 162
Voice folder 113
Voice mail
checking 113
listening to 15
Voice Memos 152
Voice Recognition 150
erase all memos 153
record memos 152
review and erase
memos 153
Voice Memos 152
Voice Setting
About VoiceSignal 159
Choice Lists 157
247
248