Audiovox SDB45 Operating instructions

DVD SURROUND SYSTEM
D-M71DVS
DVD SURROUND RECEIVER
ADV-M71
OPERATING INSTRUCTIONS
MODE D’EMPLOI
OFF
SLEEP
ON
VCR
REC
NTSC/PAL
TITLE
ENTER
A-B REPEAT
CHARAC.
SLIDE MODE
SOURCE
TV CH
B
SURROUND / SELECT
DVD SURROUND RECEIVER ADV-M71
TIME
TV IN
CLEAR
T V
EDIT/MENU
ZOOM
-
PROG/DIRECT
REPEAT
RANDOM
MODE
MEMO
BAND
DVD
TUNER
D.AUX
TV CH
+
CD SRS
SEARCH MODE
TUNING /
TV VOL
1
2
MD/LINE-1
TAPE /LINE-2
4
5
6
+
-
5CH STEREO
AUTO DECODE
TUNER
3
+
7
8
9
DIRECT
STEREO
VIRTUAL
CALL
0/10
+10
-
TEST TONE
INPUT MODE
SURROUND
FUNCTION
CH
PUSH - PARAM.
TUNER TV / VCR
DVD
IN/SURR.
A/V
SYSTEM
IN/SURR.
MD
CDR TAPE
-
+
VIRTUAL SPEAKER
TONE / SDB
1
BAND
MENU / SET
2
+
DVD
8
9
VOLUME
6
-
7
FUNCTION
STATUS
3
MUTING
ON / STANDBY
PHONES
SETUP
TONE /SDB
ENTER
SURROUND
PARAMETER
CH SELECT
RETURN
DISPLAY
ANGLE
MENU
AUDIO
VCR CH
+
TOP MENU
SUB TITLE
RC-936
FOR ENGLISH READERS
PAGE
4 ~ PAGE
111
POUR LES LECTEURS FRANCAIS PAGE
112 ~ PAGE
219
2 We greatly appreciate your purchase of this unit.
2 To be sure you take maximum advantage of all the
2 Nous vous remercions pour l’achat de cet appareil.
2 Pour être sûr de profiter au maximum de toutes les
features this unit has to offer, read these instructions
carefully and use the set properly. Be sure to keep this
manual for future reference should any questions or
problems arise.
caractéristiques qu’offre cet appareil, lire avec soin ces
instructions et bien utiliser l’appareil. Toujours
conserver ce mode d’emploi pour s’y référer
ultérieurement en cas de question ou de problème.
“SERIAL NO.
PLEASE RECORD UNIT SERIAL NUMBER ATTACHED TO
THE REAR OF THE CABINET FOR FUTURE REFERENCE”
Downloaded From Disc-Player.com Denon Manuals
“NO. DE SERIE
PRIERE DE NOTER LE NUMERO DE SERIE DE L’APPAREIL
INSCRIT A L’ARRIERE DU COFFRET DE FAÇON A POUVOIR
LE CONSULTER EN CAS DE PROBLEME.”
2 SAFETY PRECAUTIONS
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du
Règlement sur le matériel brouilleur du Canada.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
1. Handle the power supply cord carefully
Do not damage or deform the power supply cord. If it is damaged or
deformed, it may cause electric shock or malfunction when used.
When removing from wall outlet, be sure to remove by holding the plug
attachment and not by pulling the cord.
2. Do not open the top cover
In order to prevent electric shock, do not open the top cover.
3. Do not place anything inside
Do not place metal objects or spill liquid inside the DVD video player.
Electric shock or malfunction may result.
NOTE:
This DVD video player uses the semiconductor laser. To allow you to enjoy
music at a stable operation, it is recommended to use this in a room of 5
°C (41 °F) ~ 35 °C (95 °F).
Copyrights
CAUTION
TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
2 It is prohibited by law to reproduce, broadcast, rent or play discs in
public without the consent of the copyright holder.
ATTENTION
POUR ÉVITER LES CHOCS ÉLECTRIQUES,
INTERODUIRE LA LAME LA PLUS LARGE DE LA
FICHE DANS LA BORNE CORRESPONDANTE DE
LA PRISE ET POUSSER JUSQU’ AU FOND.
2 NOTE ON USE / OBSERVATIONS RELATIVES A L’UTILISATION
• Avoid high temperatures.
Allow for sufficient heat dispersion when
installed on a rack.
• Eviter des températures élevées
Tenir compte d’une dispersion de chaleur
suffisante lors de l’installation sur une étagère.
• Keep the set free from moisture, water, and
dust.
• Protéger l’appareil contre l’humidité, l’eau et
lapoussière.
• Unplug the power cord when not using the set
for long periods of time.
• Débrancher le cordon d’alimentation lorsque
l’appareil n’est pas utilisé pendant de longues
périodes.
• Handle the power cord carefully.
Hold the plug when unplugging the cord.
• Manipuler le cordon d’alimentation avec
précaution.
Tenir la prise lors du débranchement du cordon.
* (For sets with ventilation holes)
• Do not obstruct the ventilation holes.
• Ne pas obstruer les trous d’aération.
2 From Disc-Player.com Denon Manuals
Downloaded
• Do not let foreign objects in the set.
• Ne pas laisser des objets étrangers dans
l’appareil.
• Do not let insecticides, benzene, and thinner
come in contact with the set.
• Ne pas mettre en contact des insecticides, du
benzène et un diluant avec l’appareil.
• Never disassemble or modify the set in any
way.
• Ne jamais démonter ou modifier l’appareil
d’une manière ou d’une autre.
SAFETY INSTRUCTIONS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
Read Instructions – All the safety and operating instructions
should be read before the product is operated.
Retain Instructions – The safety and operating instructions
should be retained for future reference.
Heed Warnings – All warnings on the product and in the
operating instructions should be adhered to.
Follow Instructions – All operating and use instructions should
be followed.
Cleaning – Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners.
Attachments – Do not use attachments not recommended by
the product manufacturer as they may cause hazards.
Water and Moisture – Do not use this product near water – for
example, near a bath tub, wash bowl, kitchen sink, or laundry
tub; in a wet basement; or near a swimming pool; and the like.
Accessories – Do not place this product on an unstable cart,
stand, tripod, bracket, or table. The product may fall, causing
serious injury to a child or adult, and serious damage to the
product. Use only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer, or sold with the product.
Any mounting of the product should follow the manufacturer’s
instructions, and should use a
mounting accessory
recommended by the
manufacturer.
A product and cart
combination should be
moved with care. Quick
stops, excessive force,
and uneven surfaces may
cause the product and cart
combination to overturn.
Ventilation – Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the product and to
protect it from overheating, and these openings must not be
blocked or covered. The openings should never be blocked by
placing the product on a bed, sofa, rug, or other similar surface.
This product should not be placed in a built-in installation such
as a bookcase or rack unless proper ventilation is provided or
the manufacturer’s instructions have been adhered to.
Power Sources – This product should be operated only from the
type of power source indicated on the marking label. If you are
not sure of the type of power supply to your home, consult your
product dealer or local power company. For products intended
to operate from battery power, or other sources, refer to the
operating instructions.
Grounding or Polarization – This product may be equipped with
a polarized alternating-current line plug (a plug having one blade
wider than the other). This plug will fit into the power outlet
only one way. This is a safety feature. If you are unable to
insert the plug fully into the outlet, try reversing the plug. If the
plug should still fail to fit, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of the
polarized plug.
FIGURE A
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL
ELECTRICAL CODE
ANTENNA
LEAD IN
WIRE
GROUND
CLAMP
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
EQUIPMENT
13.
25.
Power-Cord Protection – Power-supply cords should be routed
so that they are not likely to be walked on or pinched by items
placed upon or against them, paying particular attention to
cords at plugs, convenience receptacles, and the point where
they exit from the product.
Outdoor Antenna Grounding – If an outside antenna or cable
system is connected to the product, be sure the antenna or
cable system is grounded so as to provide some protection
against voltage surges and built-up static charges. Article 810
of the National Electrical Code, ANSI/NFPA 70, provides
information with regard to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding conductors, location
of antenna-discharge unit, connection to grounding electrodes,
and requirements for the grounding electrode. See Figure A.
Lightning – For added protection for this product during a
lightning storm, or when it is left unattended and unused for
long periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prevent
damage to the product due to lightning and power-line surges.
Power Lines – An outside antenna system should not be
located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power lines
or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such
power lines or circuits as contact with them might be fatal.
Overloading – Do not overload wall outlets, extension cords, or
integral convenience receptacles as this can result in a risk of
fire or electric shock.
Object and Liquid Entry – Never push objects of any kind into
this product through openings as they may touch dangerous
voltage points or short-out parts that could result in a fire or
electric shock. Never spill liquid of any kind on the product.
Servicing – Do not attempt to service this product yourself as
opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified
service personnel.
Damage Requiring Service – Unplug this product from the
wall outlet and refer servicing to qualified service personnel
under the following conditions:
a) When the power-supply cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the
product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by following the
operating instructions. Adjust only those controls that are
covered by the operating instructions as an improper
adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to
restore the product to its normal operation,
e) If the product has been dropped or damaged in any way, and
f) When the product exhibits a distinct change in performance
– this indicates a need for service.
Replacement Parts – When replacement parts are required, be
sure the service technician has used replacement parts
specified by the manufacturer or have the same characteristics
as the original part. Unauthorized substitutions may result in
fire, electric shock, or other hazards.
Safety Check – Upon completion of any service or repairs to this
product, ask the service technician to perform safety checks to
determine that the product is in proper operating condition.
Wall or Ceiling Mounting – The product should be mounted to a
wall or ceiling only as recommended by the manufacturer.
Heat – The product should be situated away from heat sources
such as radiators, heat registers, stoves, or other products
(including amplifiers) that produce heat.
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC - NATIONAL ELECTRICAL CODE
Downloaded From Disc-Player.com Denon Manuals
3
ENGLISH
2 INTRODUCTION
Thank you for choosing the DENON ADV-M71 DVD Surround Receiver. This remarkable component has been engineered to provide superb surround
sound listening with home theater sources such as DVD, as well as providing outstanding high fidelity reproduction of your favorite music sources.
As this product is provided with an immense array of features, we recommend that before you begin hookup and operation that you review the
contents of this manual before proceeding.
TABLE OF CONTENTS
z
x
c
v
b
n
m
,
.
⁄0
⁄1
⁄2
⁄3
⁄4
⁄5
⁄6
⁄7
⁄8
⁄9
¤0
¤1
¤2
¤3
¤4
BEFORE USING ..........................................................................................4
CAUTIONS ON INSTALLATION ..............................................................4, 5
CAUTIONS ON HANDLING ........................................................................5
FEATURES ..............................................................................................5, 6
DISCS ..........................................................................................................6
CAUTIONS ON HANDLING DISCS.............................................................7
CONNECTIONS ....................................................................................8~15
PART NAMES AND FUNCTIONS .......................................................16~20
REMOTE CONTROL UNIT..................................................................21~28
SETTING UP THE SYSTEM ................................................................29~38
PLAY BACK .........................................................................................38~43
OPERATING THE SURROUND FUNCTIONS......................................43~45
DOLBY / DTS SURROUND.................................................................46~48
SURROUND PLAYBACK.....................................................................49~61
LISTENING TO THE RADIO................................................................62~64
ON-SCREEN DISPLAY ..............................................................................65
USING THE ON-SCREEN DISPLAY ....................................................66~83
USING THE TIMER .............................................................................84~90
CHANGING THE DEFAULT SETTINGS (DVD)...................................91~103
SYSTEM FUNCTION.......................................................................104~107
LAST FUNCTION MEMORY ...................................................................108
INITIALIZATION OF THE MICROPROCESSOR ......................................108
TROUBLESHOOTING .....................................................................109, 110
SPECIFICATIONS ....................................................................................111
2 ACCESSORIES
ADV-M71
q Operating instructions .....1
t R6P/AA batteries .............2
Check that the following parts are included in addition to the main unit:
w Warranty ( for North America model only )......................1
y AM loop antenna............1 u FM indoor antenna........1
r
t
y
e Service station list...................1
i Video cord ...............................1
u
r Remote control unit
(RC-936)........................1
i
2
SC-U71 [D-M71DVS only]
q Connecting cable (Approx. 3 m) .............................................................. 2
2 CAUTIONS ON INSTALLATION
(1) DVD SURROUND RECEIVER UNIT
1 BEFORE USING
Pay attention to the following before using this unit:
• Moving the set
To prevent short circuits or damaged wires in the connection cords,
always unplug the power cord and disconnect the connection cords
between all other audio components when moving the set.
• Before turning the power switch on
Check once again that all connections are proper and that there are
not problems with the connection cords. Always set the power
switch to the standby position before connecting and disconnecting
connection cords.
• Store this instructions in a safe place.
After reading, store this instructions along with the warranty in a
safe place.
• Note that the illustrations in this instructions may differ from
the actual set for explanation purposes.
4 From Disc-Player.com Denon Manuals
Downloaded
Noise or disturbance of the picture may be generated if this unit or
any other electronic equipment using microprocessors is used near a
tuner or TV.
If this happens, take the following steps:
• Install this unit as far as possible from the tuner or TV.
• Set the antenna wires from the tuner or TV away from this unit’s
power cord and input/output connection cords.
• Noise or disturbance tends to occur particularly when using indoor
antennas or 300 Ω/ohms feeder wires. We recommend using
outdoor antennas and 75 Ω/ohms coaxial cables.
For heat dispersal, leave at least 10 cm/4 inch of space between
the top, back and sides of this unit and the wall or other
components.
(2) SPEAKER UNIT (D-M71DVS only)
The tone character produced by speaker systems depends on
such factors as the size and type of room, the method of
installation, etc. Pay attention to the following points when
installing the speaker systems.
• If the bass sound is overemphasized when the speaker systems
are installed directly on the floor, set them on concrete blocks or
other hard stands.
• Note that howling may be produced if the speaker systems are
placed on the same stand or shelf as a record player.
• If there are walls or glass doors behind or in front of the speaker
systems, use heavy curtains, etc., to prevent resonance and
reflection.
ENGLISH
• This is an anti-magnet type speaker system which can be used near
television sets, etc., but with some TV sets the colors may become
blotchy. If this happens, turn off the TV’s power, wait 15 to 30
minutes, and turn the power back on. The TV’s self demagnetizing
circuit will improve the picture. If the colors are still blotchy, move
the speaker systems further away from the TV.
• Also note that if there is a magnet or any device generating
magnetic force nearby, interaction between this device and the
speaker systems can cause the colors on the TV to become
blotchy.
WARNING
• For your safety, do not put anything nor lean
yourself on the loudspeakers.
• Do not push the loudspeaker from aside to
protect it from topping that may cause serious
accident.
• Fix speaker cables to prevent being caught on it
and making loudspeakers topping down.
10 cm/4 inch or more
(2) SPEAKER UNIT [D-M71DVS only]
• Avoid placing the speaker systems in places exposed to direct
sunlight for long periods of time or near heaters or other heating
equipment.
• Placing in humid or dusty places may result in damage.
• Exposing the cabinet to insecticides or wiping it with benzene,
thinner or other solvents may result in damage or discoloration to
the finish. Use a soft cloth or silicone cloth to wipe any dirt off the
cabinet. Use cloths containing chemical substances with care.
• Do not apply inputs exceeding the speaker system’s max. input (the
input which can be applied a short period of time with regular
program sources).
• The output terminals may differ depending on the amplifier being
used. Consult the amplifier’s instructions.
• Clipping or other problems may occur in the output waveform when
using the speaker systems with a high output and the amplifier’s
tone controls set to the maximum. Avoid using them under these
conditions.
• Never play such special signals as a tape recorder’s fast-forwarding
signals or sine waves continuously.
• When moving the speaker systems, be careful not to apply excess
force to the speaker nets. Doing so could damage the speaker
units.
B
4 FEATURES
The ADV-M71 combines an AV amplifier and DVD player, the core
components of a home theater system, into a single compact,
stylish body. The system takes up little space, and the aluminum
front panel and half mirror of the display make for an elegant
design that blends in nicely with the décor in your room.
10 cm/4 inch or more
Wall
3 CAUTIONS ON HANDLING
(1) DVD SURROUND RECEIVER UNIT
• Switching the input function when input jacks are not
connected
A clicking noise may be produced if the input function is switched
when nothing is connected to the input jacks. If this happens, either
turn down the MASTER VOLUME control or connect components
to the input jacks.
• Muting of PRE OUT jacks, HEADPHONE jack and SPEAKER
terminals
The PRE OUT jacks, HEADPHONE jacks and SPEAKER terminals
include a muting circuit. Because of this, the output signals are
greatly reduced for several seconds after the power switch is
turned on or input function, surround mode or any other-set-up is
changed. If the volume is turned up during this time, the output will
be very high after the muting circuit stops functioning. Always wait
until the muting circuit turns off before adjusting the volume.
• Whenever the power switch is in the STANDBY state, the
apparatus is still connected on AC line voltage.
Please be sure to unplug the cord when you leave home for,
say, a vacation.
Downloaded From Disc-Player.com Denon Manuals
1. 2-channel power amplifier with Dolby Virtual Speaker
compatibility
The ADV-M71 is equipped with two 35W (6 Ω/ohms 1kHz, T.H.D.
10%) power amplifiers that make it compatible with new Dolby
Virtual Speaker technology for recreating a 5.1-channel
environment virtually using a 2-channel configuration. (Dolby
Virtual Speaker is an proprietary technology of Dolby Laboratories.)
A high performance digital signal processor enables playback of
Dolby Digital and DTS multi-channel surround signals in the Dolby
Virtual Speaker mode. Surround sound can be achieved with the
Dolby Virtual Speaker mode for CDs and other 2-channel sources
in combination with the Dolby Pro Logic II decoder.
2. 3.1-channel pre-out terminals allowing expansion into a 5.1channel surround system
When used in combination with a commercially available
subwoofer with built-in amplifier and power amplifier, the ADVM71 can be expanded into a 5.1-channel surround system. The
ADV-M71 not only recreates an accurate sound field for multichannel sources, it is also compatible with wide mode playback in
the Dolby Virtual Speaker mode.
3. Dolby Pro Logic II decoder for expanding sound field playback
The ADV-M71 is equipped with a Dolby Pro Logic II decoder for
expanding sound field playback for Dolby Surround and stereo
music sources.
4. DENON’s unique sound field simulation using the DSP
The ADV-M71 is compatible with the Rock Arena, Jazz Club and
Video Game modes with a 2-channel configuration. In a 5.1channel configuration, it is also compatible with the 5-Channel
Stereo, Mono Movie and Matrix modes.
5
ENGLISH
5. High performance DVD drive for progressive image output
compatibility
The ADV-M71 is compatible with various functions offered by DVD
sources, including multiple audio (up to 8 languages), multiple
subtitle (up to 32 languages), multiple angle playback, viewing
restriction, etc.
7. Remote control unit with preset memory function
The ADV-M71 comes with a remote control unit equipped with a
preset memory function including the remote control operation
codes for D-M31 series cassette decks and DENON remote
control compatible components as well as the remote control
operation codes of other major brands of TVs and video decks.
6. Quick setup and on-screen display compatibility
DVDs can be enjoyed simply by selecting the TV and speaker
configuration to be used. Even with a 5.1-channel speaker
configuration, standard parameters can be set automatically simply
by selecting the size of the room in which the system is being
used and the listening position. The system can be set up using an
on-screen display function.
8. Convenient system functions
When system connections are made with a D-M31 series cassette
deck, such system functions as auto function selection,
synchronized recording and timer recording/playback can be
performed easily.
5 DISCS
• The types of discs listed on the table below can be used on the ADV-M71.
The marks are indicated on the disc labels or jackets.
Usable
discs
For example:
Recorded
signals
Mark (logo)
Disc size
DVD video
DVD audio
(NOTE 1)
Digital audio +
digital video
(MPEG2)
12 cm
Digital audio +
digital video
(MPEG1)
12 cm
Video CD
Recordable
8 cm
12 cm
8 cm
ReWritable
Picture CD
Digital picture
(JPEG)
12 cm
FUJICOLOR
CD
Digital picture
(JPEG)
12 cm
2 Disc terminology
• Titles and chapters (DVD-videos)
DVD-videos are divided into several large sections called “titles”
and smaller sections called “chapters”.
Numbers are allotted to these sections. These numbers are
called “title numbers” and “chapter numbers”.
For example:
Title 1
Chapter 1
Chapter 2
Track 3
Track 4
Track 5
2 The following types of discs cannot be played on the ADVM71:
• DVDs with region numbers other than “1” or “ALL”
• DVD audio discs (NOTE 1)
• DVD+R/+RW
• DVD-ROM/RAMs
• CVD
• SVCD
• CD-ROMs (Only MP3/WMA file can be played)
• VSDs
• CDVs (Only the audio part can be played.)
• CD-Gs (Only the audio is output.)
• Photo CDs (NEVER play such discs on the ADV-M71)
If you attempt to play photo CDs, the data on the disc may be
damaged.
NOTE 1: Video part which based on DVD-video specification only can
be played.
NOTE 2: According to recording quality, some CD-R/RW cannot be
played.
• Playback control (video CDs)
Video CDs including the words “playback control” on the disc or
jacket are equipped with a function for displaying menus on the
TV screen for selecting the desired position, displaying
information, etc., in dialog fashion.
In this manual, playing video CDs using such menus is referred
to “menu playback”.
Video CDs with playback control can be used on the ADV-M71.
Title 2
Chapter 3
Chapter 1
Chapter 2
• Tracks (video and music CDs)
Video and music CDs are divided into sections called “tracks”.
Numbers are allotted to these sections. These numbers are
called “track numbers”.
6 From Disc-Player.com Denon Manuals
Downloaded
Track 2
8 cm
Digital audio
MP3
WMA
Digital picture
(JPEG)
CD
CD-R
CD-RW
(NOTE 2)
Track 1
NOTE:
• This DVD video player is designed and
manufactured to respond to the Region
Management Information that is recorded on
a DVD disc.
If the Region number described on the DVD
disc does not correspond to the Region
number of this DVD video player, this DVD
video player cannot play this disc.
The Region number for this DVD video player
is 1.
1
ENGLISH
6 CAUTIONS ON HANDLING DISCS
Discs
Cautions on Handling Discs
Only the discs including the marks shown on page 6 can be played on
the ADV-M71.
Note, however, that discs with special shapes (heart-shaped discs,
hexagonal discs, etc.) cannot be played on the ADV-M71. Do not
attempt to play such discs, as they may damage the player.
Holding Discs
• Do not get fingerprints, grease or dirt on discs.
• Be especially careful not to scratch discs when removing them
from their cases.
• Do not bend discs.
• Do not heat discs.
• Do not enlarge the center hole.
• Do not write on the labeled (printed) side with a ball-point pen or a
pencil.
• Water droplets may form on the surface if the disc is moved
suddenly from a cold place to a warm one. Do not use a hairdryer,
etc., to dry the disc.
Cautions on Storing Discs
Avoid touching the surface of discs when loading and unloading them.
Be careful not to get
fingerprints on the signal
surface (the side which
shines in rainbow colors).
• Always eject discs after playing them.
• Keep discs in their cases to protect them from dust, scratches and
warping.
• Do not put discs in the following places:
1. Places exposed to direct sunlight for long periods of time
2. Humid or dusty places
3. Places exposed to heat from heaters, etc.
Cleaning Discs
2 Fingerprints or dirt on the disc may lower sound and picture quality
or cause breaks in playback. Wipe off fingerprints or dirt.
2 Use a commercially available disc cleaning set or a soft cloth to
wipe off fingerprints or dirt.
Wipe gently from the middle
outwards.
Do not wipe with a circular
motion.
Cautions on Loading Discs
• Only load one disc at a time. Loading one disc on top of another
may result in damage or scratch the discs.
• Load 8 cm discs securely in the disc guide, without using an
adapter. If the disc is not properly loaded, it may slip out of the
guide and block the disc tray.
• Be careful not to let your fingers get caught when the disc tray is
closing.
• Do not place anything but discs in the disc tray.
• Do not load cracked or warped discs or discs that have been fixed
with adhesive, etc.
• Do not use discs on which the adhesive part of cellophane tape or
glue used to attach the label is exposed, or discs with traces of tape
or labels that have been peeled off. Such discs may get stuck inside
the player, resulting in damage.
NOTE:
• Do not use record spray or antistatic. Also do not use volatile
chemicals such as benzene or thinner.
Record
spray
Thinner
Downloaded From Disc-Player.com Denon Manuals
Benzene
7
ENGLISH
7 CONNECTIONS
• Do not plug in the AC cord until all connections have been
completed.
• Be sure to connect the left and right channels properly (left with
left, right with right).
• Insert the plugs securely. Incomplete connections will result in the
generation of noise.
• Note that binding pin plug cords together with AC cords or placing
them near a power transformer will result in generating hum or
other noise.
• Noise or humming may be generated if a connected audio
equipment is used independently without turning the power of this
unit on. If this happens, turn on the power of the this unit.
(1) Connecting the audio components (D-M31 series)
• The ADV-M71 can be used connected in a system with the D-M31 series cassette deck (DRR-M31).
• For instructions on operating the separately sold cassette deck (DRR-M31), refer to their respective operating instructions.
• Only the DRR-M31 cassette deck can be connected directly to the ADV-M71 using system connections.
Connecting the speaker systems
Connect the speaker system for the left channel (the left side as seen from the
front) to the L terminals, the speaker system for the right channel to the R
terminals. Refer to the instructions supplied with the speaker system for details.
Be sure to use speaker systems with an impedance of 6 Ω/ohms or greater.
NOTE:
• This system includes digital circuitry which may cause interference such as
color blotching or changes in the color on TVs. If this happens, move the
system and the TV as far apart as possible.
Stereo audio cord
FM indoor antenna
(included)
Speaker system
SC-U71 [D-M71DVS only]
Or commercially available
speaker
AM loop antenna
(included)
The ADV-M71 includes a built-in clock function,
so plug its power cord into a wall power outlet to
which electricity is supplied constantly.
ADV-M71 DVD
surround
receiver
AC CORD
AC 120 V, 60 Hz
Commercially available subwoofer
with built-in amplifier
Speaker cords
R
R
L
R
L
R
R
R
L
L
Stereo audio cord
Audio cord
Optical transmission
cables
8 From Disc-Player.com Denon Manuals
Downloaded
L
L
System cords
ENGLISH
CAUTION:
• Only one cassette deck can be connected to the ADV-M71 using system connections. System operations cannot be performed properly if
two cassette decks are connected using system connections.
• Whenever the power operation switch is in the STANDBY position, the unit is still connected to AC line voltage.
• Please be sure to unplug the power cord when you leave home for, e.g.,a vacation, etc.
NOTES:
• Do not plug the power cord into the power outlet until all connections are
completed. Be sure to interconnect the channels (L to L (white) and R to R
(red)) properly, as shown on the diagram.
• Use the AC OUTLET for audio equipment only. Do not use them for hair
driers, etc.
• Insert the plugs securely. Incomplete connections may result in noise.
• Be sure to connect the speaker cords between the speaker terminals and
the speaker systems with the same polarities ( + to +, – to – ). If the
polarities are switched, the sound at the center will be weak, the position
of the different instruments will be unclear, and the stereo effect will be
lost.
• After unplugging the power cord, wait about 5 seconds before plugging it
back in.
• Note that setting the connection cords (pin-plug cords) next to the power
cords may result in humming or other noise.
Note to CATV system installer:
This reminder is provided to call the CATV system installer’s attention to
Article 820-40 of the NEC which provides guidelines for proper
grounding and, in particular, specifies that the cable ground shall be
connected to the grounding system of the building, as close to the point
of cable entry as practical.
System operations
Such system operations as the timer and the auto power on functions, as well
as remote control operations cannot be performed unless all the RCA pin-plug
cords and system connector cords are connected between the units, so be sure
to make all the connections properly as shown in the diagram. Also,
disconnecting system connectors while the system is operating may result in
malfunctions. Be sure to unplug the power cord before changing connections.
MD recorder
(sold separately)
AC OUTLET
AC 120V 60Hz
UNSWITCHED
60W MAX
B
ADV-M71
DRR-M31
VIRTUAL SPEAKER
(Horizontal installation)
Install the sets as shown in one
of these diagrams. In either
case, be sure that the DVD
surround receiver’s ventilation
holes are not obstructed.
Cassette deck
(DRR-M31)
(sold separately)
AC OUTLET
AC 120V 60Hz
UNSWITCHED
60W MAX
B
ADV-M71
VIRTUAL SPEAKER
DRR-M31
(Vertical installation)
Downloaded From Disc-Player.com Denon Manuals
9
ENGLISH
(2) Connecting the PRE OUT terminals (only with multi-channel settings)
• When used in combination with a commercially available subwoofer with built-in amplifier and power amplifier, the ADV-M71 can be expanded
into a 5.1-channel surround system.
• When making connections, also refer to the operating instructions of the other components.
• To make the 5.1-channel setting, set the speakers to “5.1 CH SURROUND” in the quick system setup and select “Room Setting” and
“Listening Position”. (See pages 31 to 32.)
IN
IN
IN
IN
SUBWOOFER
• Connect the subwoofer with built-in
amplifier.
POWER AMPLIFIER
(for center ch)
Center Speaker
POWER AMPLIFIER
(for Surround ch)
Surround (L) Speaker
• Connect the power
amplifier for center and
surround speaker
system.
Surround (R) Speaker
(3) Connecting the Audio Signals of a Digital Satellite Tuner and VCR
• Connect the video signals directly to the TV and switch the picture on the TV.
• When making connections, also refer to the operating instructions of the other components.
Digital satellite/cable tuner
Connection to the optical digital input terminal
• Only audio signals are input to the optical digital input
terminal.
• Use a commercially available optical transmission
cable for connection to the optical transmission
terminal (OPTICAL).
B
OPTICAL
OUT
AUDIO
OUT
R
L
R
Connection of a digital satellite/cable tuner
• For tuners equipped with an optical digital output terminal,
connect the digital output terminal to the DIGITAL D.AUX IN
terminal on the ADV-M71 using an optical transmission cable.
• To connect the audio output terminals, use whatever of the
ADV-M71’s LINE-1 or LINE-2 terminals are open.
L
L
R
L
R
L
R
L
R
L
R
L
OUT
R
Connection of a video deck
• Connect the video deck’s audio output and audio input
terminals to whatever of the ADV-M71’s LINE-1 or LINE-2
terminals are open using pin-plug cords.
R
Video deck
AUDIO
10 From Disc-Player.com Denon Manuals
Downloaded
L
IN
ENGLISH
(4) Connecting a TV
• When making connections, also refer to the operating instructions of the TV.
S VIDEO TV
S VEDEO OUT
• Connect the TV’s S video input (S-VIDEO
INPUT) to the S-VIDEO OUT jack using a
S jack connection cord.
VIDEO OUT
• Connect the TV’s video input (VIDEO
INPUT) to the VIDEO jack using a video
connection cord.
NOTES:
• Connect this unit video outputs to the TV either directly. Do
•
not connect it via a VCR (video cassette recorder). Some
discs contain copy prohibit signals. If such discs are played
via a VCR, the copy prohibit system may cause disturbance
•
in the picture.
Downloaded From Disc-Player.com Denon Manuals
Monitor TV
S-VIDEO
IN
VIDEO
IN
Set the “TV TYPE” in “VIDEO SETUP” in “DVD SETUP” to
comply with your TV’s video format. When the TV is NTSC
formated set to NTSC.
When “PROGRESSIVE” is set, no video signals are output from
the VIDEO OUT or S-VIDEO OUT terminals. Set “INTERLACED”
if you want to use the VIDEO OUT or S-VIDEO OUT signals.
(Refer to page 39)
11
ENGLISH
(5) Connecting the antenna terminals
DIRECTION OF
BROADCASTING
STATION
AM LOOP ANTENNA
(Supplied)
FM INDOOR ANTENNA
(Supplied)
FM ANTENNA
75 Ω/ohms
COAXIAL
CABLE
FM ANTENNA
ADAPTER
(Option)
GROUND
AM OUTDOOR
ANTENNA
• An F-type FM antenna cable plug can be connected directly.
• If the FM antenna cable’s plug is not of the F-type, connect using the F-type antenna adapter (Option).
AM loop antenna assembly
Connection of AM antennas
Connect to the AM
antenna terminals.
1
4
2
Remove the vinyl tie
and take out the
connection line.
2. Insert the conductor.
3. Return the lever.
3
Bend in the reverse
direction.
a. With the antenna
on top any stable
surface.
Mount
b. With the antenna
attached to a wall.
Installation hole Mount on wall, etc.
12 From Disc-Player.com Denon Manuals
Downloaded
1. Push the lever.
Note to CATV system installer:
This reminder is provided to call the CATV system installer’s attention to
Article 820-40 of the NEC which provides guidelines for proper grounding
and, in particular, specifies that the cable ground shall be connected to the
grounding system of the building, as close to the point of cable entry as
practical.
NOTES:
• Do not connect two FM antennas simultaneously.
• Even if an external AM antenna is used, do not disconnect the AM loop
antenna.
• Make sure AM loop antenna lead terminals do not touch metal parts of the
panel.
ENGLISH
(6) Connecting to a TV or Monitor Equipped with Component Input Connectors.
• When making connections, also refer to the operating instructions of the other components.
• The video signals input to the VIDEO input (yellow) and S-Video input jacks are not output to the color difference (component) video jacks.
Color component output connectors (PR/CR, PB/CB and Y)
The red (PR/CR), blue (PB/CB) and brightness (Y) signals are output independently, achieving more faithful
reproduction of the colors.
• The color component input connectors may be marked differently on some TVs or monitors (PR, PB and Y/RY, B-Y and Y/CR, CB and Y, etc.). For details, refer to the TV’s operating instructions.
Connect in this way if your TV is compatible with Progressive Scan.
Monitor TV
Y
PB/CB PR/CR
COMPONENT VIDEO IN
Connecting a monitor TV
COMPONENT VIDEO OUT jack
• Connect the TV’s color difference
(component) video input jacks
(COMPONENT VIDEO INPUT) to the
COMPONENT VIDEO OUT jack using
75 Ω/ohms coaxial video pin-plug
cords.
NOTES:
• Use the three commercially available video cords to connect the ADV-M71’s color component output connectors to the TV or
monitor.
• Set the “TV TYPE” in “VIDEO SETUP” in “DVD SETUP” to comply with your TV’s video format. When the TV is NTSC formated
set to NTSC.
• About selecting the video output “INTERLACED” or “PROGRESSIVE”, refer to page 39.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS
PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE “STANDARD DEFINITION” OUTPUT.
Downloaded From Disc-Player.com Denon Manuals
13
ENGLISH
(7) Sound output from this unit digital and analog audio output connectors
2 When a disc is played on the ADV-M71 (DIGITAL OUT)
Settings
Audio recording format
Refer to
page
Digital audio data output
Dolby Digital bitstream
Digital out : Normal
Dolby Digital
2 channels PCM data (48 kHz/16bit)
Digital out : PCM conversion
98
Digital out : Normal
DTS bitstream
Digital out : PCM conversion
2 channels PCM data (48 kHz/16bit)
LPCM conversion mode : OFF
48 kHz/16 ~24 bit PCM
LPCM conversion mode : ON
48 kHz/16 bit PCM
DTS
DVD video
DVD audio
(video part only)
Linear PCM
48 kHz
96 kHz
LPCM conversion mode : ON
98
48 kHz/16 bit PCM
CP : ON
LPCM conversion mode : OFF
48 kHz/16 bit PCM (when copy-protected)
CP : OFF
LPCM conversion mode : OFF
96 kHz PCM (when not copy-protected)
Video CD
MPEG 1
44.1 kHz/16 bit PCM
Music CD
Linear PCM
44.1 kHz/16 bit PCM
MP3/WMA CD
MP3/WMA
32 ~ 48 kHz/16 bit PCM
• Linear PCM audio is the signal recording format used for music CDs.
While the signals are recorded at 44.1 kHz/16 bit for music CDs, for DVDs they are recorded at 48 kHz/16 bit to 96 kHz/24 bit, providing
higher sound quality than music CDs.
2 About the LINE-1 and LINE-2 analog recording outputs
When the DVD or the D.AUX digital input is selected:
• Dolby Digital, DTS, AAC and PCM digital signals are automatically converted to 2-channel stereo signals before being output (except
when in the Dolby Headphone mode) and can be recorded in analog. (For what happens in the Dolby Headphone mode, see 3 below.)
When TUNER, LINE-1 or LINE-2 is selected:
• The selected analog audio signals from the tuner or from the device connected to the LINE-1 or LINE-2 analog input terminals (IN) are
output unchanged, regardless of the ADV-M71’s input mode or surround mode. (The same is true for the device connected to the
D.AUX terminals when “LINE-2” under “⁄0 SETTING UP THE SYSTEM – (3) Detailed system setup – [5] Function settings” is set to
“D.AUX”.)
Recording output during playback of a DVD, D.AUX or LINE-1 digital input source in the Dolby Headphone mode:
• In the Dolby Headphone mode with a DVD or a digital input selected, the Dolby Headphone mode analog audio signals currently being
played are output and can be recorded in analog. (See pages 57 and 58.)
Cautions during analog recording of DVDs or digital input sources:
• Do not switch the ADV-M71’s input mode, surround mode or surround parameters during recording. Doing so will interrupt the
sound being recorded.
We recommend setting the surround mode to “STEREO” or “DIRECT”.
• When using headphones, recording is automatically performed in the Dolby Headphone mode. Do not disconnect the headphones
or switch the headphones mode during recording.
14 From Disc-Player.com Denon Manuals
Downloaded
ENGLISH
(8) Speaker system connections
Be sure to turn the amplifier’s power off when connecting the
speaker systems.
• Use the included cables to connect the input terminals on the back
of the speaker systems (see diagram) to the amplifier’s speaker
output terminals. Connect the speaker system for the left channel
amplifier’s “L” terminals, the one for the right channel to the
amplifier’s “R” terminals, matching the polarities (“≈” and “√”
marks). Inverting the polarities will result in unnatural sound, with
the phase off or no low bass sound. Also check that all two terminal
knobs are tightly fastened.
Connecting the speaker cords
Use the included connection cords to connect the input terminals on
the backs of the speaker systems (see the diagram at the right) to the
ADV-M71’s speaker output terminals.
• Connect the speaker system for the left channel to the “L”
terminals, the speaker system for the right channel to the “R”
terminals, and be sure the polarities (“+” and “–”) are properly
interconnected.
• Note that if the polarities are inverted, the phase may be off and the
bass sound may be missing, resulting in an unnatural sound. Also
check that both the speaker terminal’s screws are tightly screwed.
Either twist the core wires
firmly or terminate the wires.
Connections
(The red terminals on the right side are the “≈” terminals, the black
ones on the left side the “√” terminals.)
Loosen the terminals knobs, insert the cables’
core wires, then tighten the knobs.
Connect to amplifier’s “≈” side. (Copper color)
qTurn the speaker
terminal
counterclockwis
e to loosen it.
wInsert the cord’s
core wires.
eTurn clockwise to
tighten the
terminal.
Connecting banana plugs
Connect to amplifier’s
“√” side. (Silver color)
NOTE:
Make sure the core wires do not touch
each other.
When using banana plugs, turn
clockwise to tighten the terminal
before inserting.
Protector circuit
• This unit is equipped with a high-speed protection circuit. The purpose of this circuit is to protect the speakers under circumstances such as
when the output of the power amplifier is inadvertently short-circuited and a large current flows, when the temperature surrounding the unit
becomes unusually high, or when the unit is used at high output over a long period which results in an extreme temperature rise.
When the protection circuit is activated, the speaker output is cut off and the power supply indicator LED flashes. Should this occur, please
follow these steps: be sure to switch off the power of this unit, check whether there are any faults with the wiring of the speaker cables or
input cables, and wait for the unit to cool down if it is very hot. Improve the ventilation condition around the unit and switch the power back
on.
If the protection circuit is activated again even though there are no problems with the wiring or the ventilation around the unit, switch off
the power and contact a DENON service center.
Note on speaker impedance
• The protector circuit may be activated if the set is played for long periods of time at high volumes when speakers with an impedance lower
than the specified impedance (for example speakers with an impedance of lower than 4 Ω/ohms) are connected. If the protector circuit is
activated, the speaker output is cut off. Turn off the set’s power, wait for the set to cool down, improve the ventilation around the set, then
turn the power back on.
Cautions on connecting
• With this unit’s speaker outputs, signals with the reverse phase of the “+” side output terminal’s signals are also output from the “-” side
output terminal.
Do not connect to a device for switching between multiple speakers (a speaker selector or audio channel selector) or connect in ways other
than described in this manual. Doing so will result in damage.
(8) Removing the speaker net (D-M71DVS only)
• The net on the front of the speaker system is detachable.
• To remove it, grasp it on both sides and pull it towards you.
• To attach the net, line up the plastic pieces holes out of the net with the sticking in the cabinet and press in.
Downloaded From Disc-Player.com Denon Manuals
15
ENGLISH
8 PART NAMES AND FUNCTIONS
Front Panel
• For details on the functions of these parts, refer to the pages given in parentheses ( ).
!4
B
!3 !2 !1 !0 o i
SURROUND / SELECT
DVD SURROUND RECEIVER ADV-M71
PUSH - PARAM.
-
+
BAND
MENU / SET
VIRTUAL SPEAKER
TONE / SDB
VOLUME
FUNCTION
ON / STANDBY
PHONES
qw
e
q Power button (ON/STANDBY)..................................................(30)
w Remote control sensor.............................................................(21)
e Display
r Headphones jack (PHONES) ....................................................(57)
t Function selector (FUNCTION).................................................(43)
y Tone/super dynamic bass button (TONE/SDB) ........................(45)
u Volume control (VOLUME) .......................................................(41)
16 From Disc-Player.com Denon Manuals
Downloaded
r ty u
i Stop/band button ( 2 BAND)..............................................(41, 62)
o Play/pause button ( 1 / 3) .......................................................(40)
!0 Open/close button ( 5 ) ..........................................................(40)
!1 Skip backward and forward buttons
( 8 / – and + / 9 ) .....................................................(42, 62)
!2 Surround/select knob (SURROUND/SELECT) ..........................(49)
Surround parameter button (PARAMETER) .............................(50)
!3 Menu/set button (MENU/SET) .................................................(64)
!4 Disc holder ...............................................................................(39)
ENGLISH
Remote control unit
• For details on the functions of these parts, refer to the pages given in parentheses ( ).
• Some of the buttons on the remote control unit have some functions.
The functions are switched using the remote control mode selector switches.
@4
q
w
e
r
t
y
u
i
o
!0
!1
OFF
ON
VCR
REC
NTSC/PAL
SLEEP
SOURCE
TITLE
TIME
TV IN
T V
CLEAR
ENTER
A-B REPEAT
CHARAC.
SLIDE MODE
PROG/DIRECT
REPEAT
RANDOM
MODE
MEMO
BAND
DVD
TUNER
D.AUX
1
2
3
MD/LINE-1
TAPE /LINE-2
4
5
6
+
-
TV CH
EDIT/MENU
ZOOM
-
TV CH
+
CD SRS
SEARCH MODE
TUNING /
TV VOL
5CH STEREO
AUTO DECODE
TUNER
7
8
9
+
DIRECT
STEREO
VIRTUAL
CALL
0/10
+10
-
TEST TONE
INPUT MODE
SURROUND
FUNCTION
#1
CH
TUNER TV / VCR
DVD
IN/SURR.
A/V
SYSTEM
IN/SURR.
MD
CDR TAPE
!2
!3
!4
!5
!6
!7
!8
1
2
9
6
7
@0
@1
@2
@3
#3
#4
#5
#6
-
STATUS
3
MUTING
SETUP
TONE /SDB
ENTER
!9
#2
+
DVD
8
@5
@6
@7
@8
@9
#0
#7
#8
#9
$0
SURROUND
PARAMETER
CH SELECT
DISPLAY
RETURN
ANGLE
MENU
AUDIO
RC-936
VCR CH
+
TOP MENU
SUB TITLE
$1
$2
$3
$4
$5
q Transmission indicator
w Sleep timer button ...................................................................(90)
e NTSC/PAL button .....................................................................(11)
r Clear button..............................................................................(70)
t A-B repeat button.....................................................................(69)
y Program/direct..........................................................................(70)
u Repeat button...........................................................................(68)
i Input source/surround mode selector button
o Call button ................................................................................(70)
!0 Test tone button .......................................................................(36)
!1 Input mode selector button......................................................(43)
!2 DVD play button .......................................................................(40)
!3 DVD stop button ......................................................................(41)
!4 DVD skip buttons .....................................................................(42)
!5 DVD search buttons ...........................................................(42, 43)
!6 DVD pause button....................................................................(42)
!7 Status button............................................................................(44)
!8 Setup button.............................................................................(30)
!9 Channel select button ..............................................................(36)
@0 Return button ...........................................................................(41)
@1 Display button ..........................................................................(66)
@2 Angle button.............................................................................(80)
@3 Audio selector button...............................................................(78)
@4 Remote control signal transmission window...........................(21)
@5 Power button............................................................................(30)
@6 * System buttons...............................................................(19, 22)
@7 Zoom button.............................................................................(83)
@8 Slide mode button....................................................................(77)
@9 Search mode button.................................................................(42)
#0 Random button.........................................................................(71)
#1 Tuner tuning +/– buttons ..........................................................(62)
#2 Tuner preset +/– buttons..........................................................(64)
#3 Function selector button ..........................................................(43)
#4 Surround mode selector button ...............................................(44)
#5 Mode selector switches.....................................................(18, 19)
#6 Main volume control buttons ...................................................(41)
#7 Muting button...........................................................................(45)
#8 Tone/SDB button ......................................................................(45)
#9 Enter button .............................................................................(29)
$0 Cursor button ...........................................................................(29)
$1 Surround parameter button......................................................(49)
$2 Top menu button ......................................................................(81)
$3 Menu button.............................................................................(82)
$4 Subtitle button..........................................................................(79)
$5 * System buttons.........................................................(19, 22, 28)
* System buttons ............................................(19, 20, 22, 23, 28)
• For details on the function and operation of the various parts, refer to the pages indicated in (parentheses).
• Buttons indicated
are DVD control buttons and can be operated when the remote control mode selector switch is set to the
position.
• The functions of the system buttons (*) are switched using the remote control mode selector switch.
Downloaded From Disc-Player.com Denon Manuals
A/V
and
DVD
17
ENGLISH
Names and functions of remote control unit buttons on the ADV-M71
• Buttons in sections q ~ e can be operated regardless of the position of mode switches 1 and 2.
• Consider A / V and DVD as standard positions, and switch as necessary to operate.
q
OFF
SLEEP
ON
VCR
REC
NTSC/PAL
TITLE
TV IN
T V
ENTER
A-B REPEAT
CHARAC.
SLIDE MODE
EDIT/MENU
ZOOM
SOURCE
CLEAR
TV CH
3
q
1
TIME
-
PROG/DIRECT
REPEAT
RANDOM
MODE
MEMO
BAND
DVD
TV CH
TUNING /
TV VOL
TUNER
D.AUX
1
2
3
MD/LINE-1
TAPE /LINE-2
4
5
6
+
-
5CH STEREO
AUTO DECODE
TUNER
7
8
9
+
DIRECT
STEREO
VIRTUAL
CALL
0/10
+10
-
TEST TONE
INPUT MODE
SURROUND
FUNCTION
CH
TUNER TV / VCR
DVD
IN/SURR.
A/V
SYSTEM
IN/SURR.
MD
CDR TAPE
1
2
8
e
2
+
DVD
w
+
CD SRS
SEARCH MODE
9
6
-
7
STATUS
3
MUTING
SETUP
TONE /SDB
q
ENTER
SURROUND
PARAMETER
CH SELECT
RETURN
3
DISPLAY
ANGLE
MENU
AUDIO
VCR CH
+
TOP MENU
SUB TITLE
RC-936
1
Set mode switch 1 to the “A/V” position.
A/V
SYSTEM
2
Set mode switch 2 to the position of the function you want to
operate (DVD, TUNER or IN/SURR).
TUNER TV / VCR
DVD
IN/SURR.
18 From Disc-Player.com Denon Manuals
Downloaded
q Surround amplifier control buttons
ON
: Turns the ADV-M71’s power on.
OFF
: Turns the ADV-M71’s power off.
FUNCTION : Function selection (in order)
SURROUND : Surround mode selection
INPUT MODE : Input mode selection
TEST TONE : Test tone on/off
+
: Main volume up
–
: Main volume down
MUTING
: Muting on/off
STATUS
: Status display selection
TONE/SDB : Tone/SDB selection and setting
SURROUND : Surround parameter selection and setting
PARAMETER
SET UP
: Setup mode on/off
CH SELECT : Channel level selection and setting
•, ª, 0, 1 : Cursor up, down, left and right
ENTER
: Enter setting
w DVD control buttons
1
: Play (auto power on and auto function selection)
2
: Stop
8, 9 : Skip (cueing)
6, 7
: Search (fast-reverse and fast-forward)
3
: Pause and frame-by-frame
e Tuner control buttons
CH +/–
: Preset channel up/down
(auto power on and auto function selection)
ENGLISH
3
Operate the ADV-M71.
[1] Surround amplifier system buttons
(Operated with mode switch 2 set to “IN/SURR.”)
• These operations are possible with mode switch 1 at
any position.
The operations in gray print can be performed.
OFF
ON
VCR
REC
NTSC/PAL
SLEEP
ENTER
A-B REPEAT
OFF
TIME
SLEEP
T V
SOURCE
CHARAC.
SLIDE MODE
EDIT/MENU
ZOOM
CLEAR
TV CH
-
PROG/DIRECT
REPEAT
RANDOM
MODE
MEMO
BAND
TV CH
TUNING /
TV VOL
TUNER
D.AUX
2
3
TAPE /LINE-2
4
5
6
+
-
5CH STEREO
AUTO DECODE
TUNER
7
8
9
+
DIRECT
STEREO
VIRTUAL
CALL
0/10
+10
TEST TONE
INPUT MODE
SURROUND
SYSTEM
T V
EDIT/MENU
ZOOM
REPEAT
RANDOM
MODE
MEMO
BAND
1
2
TAPE /LINE-2
4
5
6
+
-
5CH STEREO
AUTO DECODE
TUNER
3
8
9
STEREO
VIRTUAL
-
CALL
0/10
+10
-
FUNCTION
TEST TONE
INPUT MODE
SURROUND
FUNCTION
IN/SURR.
MD
SYSTEM
-
9
6
TONE /SDB
MUTING
SETUP
TONE /SDB
ENTER
ENTER
SURROUND
PARAMETER
DISPLAY
MENU
AUDIO
VCR CH
:
STEREO
DIRECT
:
:
+
-
TOP MENU
DISPLAY
RETURN
SUB TITLE
Sleep on/off
Function DVD
Function TUNER
Function D.AUX
Function MD/LINE-1
Function TAPE/LINE-2
5-channel stereo surround mode
(when “5.1CH” selected in setup)
2-channel mode switching when auto
decode surround mode set
(when “5.1CH” selected in setup)
2-channel mode switching when Dolby
Virtual Speaker or Dolby VS surround mode
set
Stereo mode
Direct mode
Downloaded From Disc-Player.com Denon Manuals
SURROUND
PARAMETER
CH SELECT
ANGLE
RC-936
VIRTUAL
-
7
3
MUTING
CH SELECT
AUTO DECODE :
+
STATUS
SETUP
:
:
:
:
:
:
:
2
DVD
8
3
SLEEP
DVD
TUNER
D.AUX
MD/LINE-1
TAPE/LINE-2
5CH STEREO
IN/SURR.
MD
CDR TAPE
1
+
STATUS
ANGLE
CH
TUNER TV / VCR
DVD
IN/SURR.
A/V
9
RETURN
+
7
2
7
TUNING /
TV VOL
D.AUX
TUNER
+
CD SRS
SEARCH MODE
DIRECT
CH
DVD
6
TV CH
MD/LINE-1
CDR TAPE
8
-
PROG/DIRECT
DVD
TUNER TV / VCR
DVD
IN/SURR.
1
TIME
CHARAC.
SLIDE MODE
TV CH
CD SRS
SEARCH MODE
1
A/V
ENTER
A-B REPEAT
TITLE
TV IN
+
MD/LINE-1
DVD
ON
VCR
REC
NTSC/PAL
TITLE
TV IN
SOURCE
CLEAR
[2] DVD system buttons
(Operated with mode switch 2 set to “DVD”)
MENU
AUDIO
VCR CH
+
TOP MENU
SUB TITLE
RC-936
NTSC/PAL :
ZOOM
:
SLIDE MODE :
A-B REPEAT :
CLEAR
:
SEARCH MODE:
RANDOM :
REPEAT
:
PROG/DIRECT :
CALL
:
0 ~ 9, +10 :
TOP MENU :
MENU
:
DISPLAY
:
RETURN
:
SUBTITLE :
AUDIO
:
ANGLE
:
NTSC/PAL selection
Zoom on/off
JPEG image slide mode selection
A-B repeat playback setting
Program clear
Title and chapter search selection
Random play on/off
Repeat play setting
Program/direct play selection
Program call
Number buttons
Top menu call
Menu call
Display call/selection
Menu return
Subtitle language selection
Audio language selection
Angle selection
19
ENGLISH
3
[3] Tuner system buttons
(Operated with mode switch 2 set to “TUNER”)
OFF
SLEEP
ON
VCR
REC
NTSC/PAL
TITLE
TV IN
T V
ENTER
A-B REPEAT
CHARAC.
SLIDE MODE
EDIT/MENU
ZOOM
SOURCE
CLEAR
TV CH
PROG/DIRECT
REPEAT
TIME
-
TV CH
RANDOM
MODE
MEMO
BAND
DVD
TUNER
D.AUX
+
CD SRS
SEARCH MODE
TUNING /
TV VOL
1
2
MD/LINE-1
TAPE /LINE-2
4
5
6
+
-
5CH STEREO
3
AUTO DECODE
TUNER
7
8
9
+
DIRECT
STEREO
VIRTUAL
CALL
0/10
+10
-
TEST TONE
INPUT MODE
SURROUND
FUNCTION
CH
TUNER TV / VCR
DVD
IN/SURR.
A/V
SYSTEM
IN/SURR.
MD
CDR TAPE
1
2
+
DVD
8
9
6
-
7
STATUS
3
MUTING
SETUP
TONE /SDB
ENTER
SURROUND
PARAMETER
CH SELECT
DISPLAY
RETURN
ANGLE
MENU
AUDIO
VCR CH
+
TOP MENU
SUB TITLE
RC-936
BAND
MEMO
MODE
TUNER +/–
1 ~ 10, +10
:
:
:
:
:
FM/AM band selection
Preset memory
FM auto/mono mode selection
Tuning up/down
Preset channel number buttons
20 From Disc-Player.com Denon Manuals
Downloaded
ENGLISH
9 REMOTE CONTROL UNIT
• The included remote control unit (RC-936) can be used to operate not only this unit but other remote control compatible DENON components
as well. In addition, the memory contains the control signals for other remote control units, so it can be used to operate non-DENON remote
control compatible products.
(1) Inserting the batteries
q Remove the remote control unit’s rear cover.
w Set three R6P/AA batteries in the battery compartment in the
indicated direction.
Notes on Batteries
• Use R6P/AA batteries in the remote control unit.
• The batteries should be replaced with new ones approximately
once a year, though this depends on the frequency of usage.
• Even if less than a year has passed, replace the batteries with new
ones if the set does not operate even when the remote control unit
is operated nearby the set. (The included battery is only for verifying
operation. Replace it with a new battery as soon as possible.)
• When inserting the batteries, be sure to do so in the proper
direction, following the “≈” and “√” marks in the battery
compartment.
• To prevent damage or leakage of battery fluid:
• Do not use a new battery together with an old one.
• Do not use two different types of batteries.
• Do not short-circuit, disassemble, heat or dispose of batteries in
flames.
• Remove the batteries from the remote control unit when you do
not plan to use it for an extended period of time.
• If the battery fluid should leak, carefully wipe the fluid off the inside
of the battery compartment and insert new batteries.
• When replacing the batteries, have the new batteries ready and
insert them as quickly as possible.
e Put the rear cover back on.
(2) Using the remote control unit
B
Approx. 7m / 22 feet
30°
SOUR
R
-1
LINE
U
-2
/LINE
X
D.AU
SEAR
TAPE
+
V
DOM
RAN D
BAN
5CH
/
EO
STER
NG
VOL
TUNITV
/MEN
EDIT ZOOM
E
CH
TV SRS
MOD
CD CH
TUNE
T
MD/
TIME
-
AC. E
MOD
CHARE
SLID CH
TV
DE
DECO
EO
STER
AUTO
+
IN
AT
REPE O
MEM
DVD
TV
CT
-
TITLE
R
UAL
VIRT
TUNE
/10
E
T MOD
INPU
+
ON
TONE
D
OUN
SURR
CH
-
R AT
ENTEREPE
A-B
/DIRE E
PROG MOD
TEST
R
TV
TION
FUNC
TUNE
1
EM
SYST
/ VCR IN/S
MD
DVD
8
IN/S
URR.
9
TAPE
URR.
CDR
2
6
P
SETU
US
STAT
7
3
ING
MUT
CH
CT
SELE
30°
TONE
/SDB
RN
RETU
LE
ANG
LAY
DISP
-
IO
AUD
CH
U
MEN
+
SURROU
PARAME
TERND
TOP
TITLE
MENU
SUB
VCR
RC-9
36
ENTER
3
6
9
+10
NTSC
R
CLEA
8
0
DVD
+
2
5
CT
DIRE
V
VCR
REC /PAL
P
SLEE CE
OFF
1
4
7
CALL
A/
-
• Point the remote control unit at the remote sensor on the main unit
as shown on the diagram.
• The remote control unit can be used from a straight distance of
approximately 7 meters/22 feet from the main unit, but this
distance will be shorter if there are obstacles in the way or if the
remote control unit is not pointed directly at the remote sensor.
• The remote control unit can be operated at a horizontal angle of up
to 30 degrees with respect to the remote sensor.
Downloaded From Disc-Player.com Denon Manuals
NOTES:
• It may be difficult to operate the remote control unit if the remote
sensor is exposed to direct sunlight or strong artificial light.
• Do not press buttons on the main unit and remote control unit
simultaneously. Doing so may result in malfunction.
• Neon signs or other devices emitting pulse-type noise nearby may
result in malfunction, so keep the set as far away from such
devices as possible.
21
ENGLISH
• The included remote control unit (RC-936) can be used to operate
not only the ADV-M71 but also to perform system operations for
the D-M31 series and to operate other remote control compatible
DENON products. In addition, the remote control operation codes
of other major brands of TVs and video decks are also stored in the
remote control unit, so the unit can be used to operate these TVs
and video decks as well.
3
[1] CD recorder system buttons
(operated with mode switch 2 set to “CDR”)
OFF
ON
VCR
REC
NTSC/PAL
SLEEP
TITLE
SOURCE
ENTER
A-B REPEAT
CLEAR
T V
CHARAC.
SLIDE MODE
EDIT/MENU
ZOOM
TV CH
• Turn on the power of all the components before operating them.
• Depending on the model and year of make of your component,
some of the keys may not work.
REPEAT
RANDOM
MODE
MEMO
BAND
TUNER
OFF
TITLE
ENTER
A-B REPEAT
EDIT/MENU
ZOOM
-
REPEAT
RANDOM
MODE
MEMO
BAND
TUNER
D.AUX
1
2
3
MD/LINE-1
DVD
TAPE /LINE-2
TV CH
D.AUX
1
2
TAPE /LINE-2
4
5
6
+
-
5CH STEREO
AUTO DECODE
TUNER
3
8
9
STEREO
VIRTUAL
CALL
0/10
+10
-
TEST TONE
INPUT MODE
SURROUND
FUNCTION
CH
TUNER TV / VCR
DVD
IN/SURR
6
AUTO DECODE
TUNER
ANGLE
8
9
STEREO
VIRTUAL
0/10
+10
-
TEST TONE
INPUT MODE
SURROUND
FUNCTION
IN/SURR.
MD
CDR TAPE
2
2
9
-
STATUS
MUTING
SETUP
TONE /SDB
ENTER
SURROUND
PARAMETER
CH SELECT
DISPLAY
RETURN
ANGLE
MENU
VCR CH
+
TOP MENU
SUB TITLE
AUDIO
SUB TITLE
AUDIO
TIME
TITLE
+
DVD
7
+
TOP MENU
CH
TUNER TV / VCR
DVD
IN/SURR.
3
MENU
+
7
CALL
6
DISPLAY
VCR CH
RC-936
DIRECT
SYSTEM
RETURN
TUNING /
TV VOL
5
A/V
SURROUND
PARAMETER
-
CD SRS
SEARCH MODE
5CH STEREO
8
RC-936
1
+
7
DIRECT
+
+
-
1
3
TUNING /
TV VOL
CH SELECT
T V
CHARAC.
SLIDE MODE
PROG/DIRECT
4
1
TIME
TV IN
TV CH
3
+
CD SRS
SEARCH MODE
ON
VCR
REC
NTSC/PAL
SOURCE
CLEAR
TV CH
MD/LINE-1
A/V
SLEEP
-
PROG/DIRECT
DVD
(3) Operating DENON audio components
TIME
TV IN
Set mode switch 1 to the “SYSTEM” position.
(Blue print)
: Disc time display
: Name display and selection of characters when
inputting names
REC
: Recording
SOURCE
: CD recorder power on/off
EDIT/MENU : Menu selection
ENTER
: Entering of menu items
CLEAR
: Program clearing
RANDOM : Random play on/off
REPEAT
: Repeat play setting
PROG/DIRECT : Program/direct playback selection
CALL
: Program calling
1~10, +10 : Track number selection
8, 9
: Auto search (cueing)
6, 7
: Manual search (fast-reverse and fast-forward)
1 (/ 3)
: Play (play/pause, auto power on and auto function
selection with the CDR-M30)
3
: Pause
2
: Stop
[2] Tape deck system button
(operated with mode switch 2 set to “TAPE”)
A/V
OFF
ON
VCR
REC
NTSC/PAL
SLEEP
TITLE
SOURCE
SYSTEM
ENTER
A-B REPEAT
CLEAR
T V
CHARAC.
SLIDE MODE
EDIT/MENU
ZOOM
TV CH
2
Set mode switch 2 to the position for the component to be
operated (MD, CDR or TAPE).
(Blue print)
TIME
TV IN
-
PROG/DIRECT
REPEAT
RANDOM
MODE
MEMO
BAND
DVD
TUNER
TV CH
TUNING /
TV VOL
D.AUX
SURROUND
PARAMETER
CH SELECT
TUNER TV / VCR
DVD
IN/SURR.
+
CD SRS
SEARCH MODE
RETURN
DISPLAY
ANGLE
MENU
AUDIO
VCR CH
+
TOP MENU
SUB TITLE
IN/SURR.
MD
CDR TAPE
RC-936
3
Operate the audio component.
• For details, refer to the component’s operating instructions.
Operation may not be possible for some models.
REC
CD SRS
6, 7
1
0 TAPE
22 From Disc-Player.com Denon Manuals
Downloaded
: Recording
: CD synchronized recording (DRR-M31 system
function)
: Rewind and fast-forward
: Forward direction play
: Reverse direction play (0 and 1: auto power on
and auto function selection with the DRR-M31)
ENGLISH
(4) TV and video deck preset memories
• Components of other brands can be operated with the included
remote control unit by storing their codes in the preset memory.
Note that depending on the model some operations may not be
possible and some buttons may not operate properly.
3
4
4
OFF
ON
VCR
REC
NTSC/PAL
SLEEP
ENTER
A-B REPEAT
CLEAR
TIME
TV IN
T V
CHARAC.
SLIDE MODE
EDIT/MENU
ZOOM
TV CH
-
PROG/DIRECT
REPEAT
RANDOM
MODE
MEMO
BAND
TUNER
D.AUX
1
2
3
MD/LINE-1
TAPE /LINE-2
DVD
TV CH
+
6
AUTO DECODE
TUNER
8
9
STEREO
VIRTUAL
CALL
0/10
+10
-
TEST TONE
INPUT MODE
SURROUND
FUNCTION
2
9
-
STATUS
MUTING
SETUP
TONE /SDB
ENTER
SURROUND
PARAMETER
CH SELECT
DISPLAY
RETURN
ANGLE
MENU
AUDIO
7
5
6
5CH STEREO
AUTO DECODE
8
9
NOTES:
• When buttons are pressed while setting the preset memory,
their signals are sent from the remote control transmitter, so
cover the remote control sensor when setting the preset
memory to prevent accidental operation.
• Depending on the model and year of make, some of the remote
control codes for the brands included on the tables may not
operate properly.
• For some brands there are multiple types of remote control
codes. If an operation does not work, try changing to one of the
other codes.
+
DVD
7
TAPE /LINE-2
0/10
IN/SURR.
MD
2
3
3
MD/LINE-1
CH
CDR TAPE
6
D.AUX
2
STEREO
TUNER TV / VCR
DVD
IN/SURR.
8
TUNER
1
VCR
REC
NTSC/PAL
+
7
DIRECT
SYSTEM
DVD
T V
4
5
1
TIME
TUNING /
TV VOL
5CH STEREO
A/V
3
4
Press the TV button to preset a TV, the VCR button to preset
a video deck, then input the 3-digit number corresponding to
the brand of the component whose signals are to be stored in
the preset memory (refer to the tables of remote control
codes on pages 24 to 27).
CD SRS
SEARCH MODE
+
-
4
1
TITLE
SOURCE
4
VCR CH
+
TOP MENU
SUB TITLE
RC-936
2 Not set upon shipment from the factory.
1
Set mode switch 1 to the “A/V” position.
2
Set mode switch 2 to the “TV/VCR” position.
3
Press the power ON button and the OFF button
simultaneously.
• The transmission LED (indicator) flashes.
A/V
SYSTEM
TUNER TV / VCR
DVD
IN/SURR.
IN/SURR.
MD
CDR TAPE
OFF
Downloaded From Disc-Player.com Denon Manuals
ON
23
ENGLISH
Combinations of preset codes for different brands
TV
Admiral
045, 121
Fujitsu
004, 062
Adventura
122
Funai
004, 062
Aiko
054
Futuretech
004
Akai
016, 027, 046
GE
020, 036, 037, 040, 044, 058, 066, 088, 119, 120,
Alleron
062
A-Mark
007
Amtron
061
Anam
006, 007, 036
Grundy
062
Anam National
061, 147
Hitachi
029, 031, 051, 052, 070, 111, 112, 113, 124, 134
AOC
003, 007, 033, 038, 039, 047, 048, 049, 133
Hitachi Pay TV
151
Archer
007
Infinity
017, 071
Audiovox
007, 061
Janeil
122
Bauer
155
JBL
017, 071
Belcor
047
JC Penny
020, 034, 039, 040, 041, 044, 048, 050,058, 066,
Bell & Howell
045, 118
Bradford
061
JCB
046
Brockwood
003, 047
JVC
019, 051, 052, 072, 073, 091, 117, 126
Candle
003, 030, 031, 032, 038, 047, 049, 050, 122
Kawasho
018, 046
Capehart
003
Kenwood
038, 056, 057
Celebrity
046
Kloss
010, 032
Circuit City
003
Kloss Novabeam 005, 122, 127, 131
Citizen
029, 030, 031, 032, 034, 038, 047, 049, 050, 054,
KTV
074, 123
061, 095, 122, 123
Loewe
071
Concerto
031, 047, 049
Logik
144
Colortyme
003, 047, 049, 135
Luxman
031
Contec
013, 051, 052, 061
LXI
008, 014, 017, 024, 040, 044, 063, 071, 075, 076,
Cony
051, 052, 061
Craig
004, 061
Crown
029
Curtis Mathes
029, 034, 038, 044, 047, 049, 053, 095, 118
Marantz
015, 017, 071, 080
Daewoo
027, 029, 039, 048, 049, 054, 055, 106, 107, 137
Matsui
027
Daytron
003, 049
Memorex
014, 027, 045, 083, 118, 144
Dimensia
044
Metz
160, 161, 162, 163, 164
Dixi
007, 015, 027
MGA
001, 039, 048, 056, 057, 058, 065 081, 083
Electroband
046
Midland
125
Electrohome
029, 056, 057, 058, 147
Minutz
066
Elta
027
Mitsubishi
001, 016, 039, 048, 056, 057, 058, 065, 081, 082,
Emerson
029, 051, 059, 060, 061, 062, 118, 123, 124, 139, 148
Envision
038
Montgomery Ward 011, 020, 144, 145, 146
Etron
027
Motorola
121, 147
Fisher
014, 021, 063, 064, 065, 118
MTC
031, 034, 039, 048, 095
Formenti
155
NAD
008, 075, 076, 128
Fortress
012
National
002, 036, 061, 147
24 From Disc-Player.com Denon Manuals
Downloaded
125, 147
Goldstar
015, 029, 031, 039, 048, 051, 056, 057, 067,
068, 069, 116, 165
069, 076, 088, 090, 095, 125, 136, 159
077, 118, 125
Magnavox
005, 010, 017, 030, 033, 038, 050, 056, 071, 078,
079, 085, 089, 108, 109, 110, 127, 131, 132, 145
083, 105
ENGLISH
National Quenties 002
Sharp
011, 012, 013, 026, 093, 099, 100, 104, 121
NEC
031, 038, 039, 048, 057, 084, 086, 135, 147
Siemens
013
Nikko
054
Signature
045, 144
NTC
054
Simpson
050
Optimus
128
Sony
043, 046, 138, 146, 150
Optonica
011, 012, 093, 121
Soundesign
030, 050, 062
Orion
004, 139
Spectricon
007, 033
Panasonic
002, 009, 017, 036, 037, 071, 141, 143, 147
Squareview
004
Philco
005, 010, 030, 050, 051, 056, 079, 085, 127, 131,
Supre-Macy
032, 122
132, 145, 147
Supreme
046
005, 015, 017, 050, 051, 056, 078, 087, 088, 089,
Sylvania
005, 010, 017, 030, 078, 079, 085, 089, 101, 127,
Philips
131, 132, 147
131, 132, 145, 155
Pioneer
124, 128, 142
Symphonic
004, 148
Portland
054
Tandy
012, 121
Price Club
095
Tatung
036, 124
Proscan
040, 044, 125
Technics
037
Proton
035, 051, 092, 129
Teknika
Pulsar
042
Quasar
036, 037, 074, 141
Tera
035, 129
Radio Shack
011, 044, 063, 093, 118
Toshiba
008, 014, 034, 063, 075, 076, 095, 097, 136, 158,
RCA
040, 044, 125, 130, 137, 151, 152
Realistic
014, 063, 093, 118
Universal
020, 066, 088
Saisho
027
Victor
019, 073, 126
Samsung
003, 015, 034, 053, 055, 057, 094, 095, 136,153
Video Concepts
016
Sansui
139
Viking
032, 122
Sanyo
013, 014, 021, 022, 063, 064, 081, 096
Wards
005, 045, 066, 078, 085, 088, 089, 093, 102, 103,
SBR
015
Schneider
015
Zenith
042, 114, 115, 140, 144, 149
Scott
062
Zonda
007
Sears
008, 014, 021, 022, 023, 024, 025, 040, 052, 057,
001, 030, 032, 034, 052, 054, 078, 083, 095, 144,
156, 157
159
131, 132, 148
062, 063, 064, 065, 073, 075, 076,
097, 098, 125, 159
Downloaded From Disc-Player.com Denon Manuals
25
ENGLISH
VCR
Admiral
081
JVC
004, 005, 006, 026, 029, 043, 044, 045, 046, 085
Aiko
095
Kenwood
004, 005, 006, 026, 029, 033, 045, 085, 090
Aiwa
009
Kodak
088
Akai
026, 027, 070, 072, 082, 083, 084
Lloyd
009, 094
Alba
055
LXI
088
Amstrad
009
Magnavox
015, 016, 042, 049, 063, 106
ASA
042
Magnin
087
Asha
087
Marantz
004, 005, 006, 015, 042, 049, 085, 090
Audio Dynamic
005, 085
Marta
088
Audiovox
088
MEI
049
Beaumark
087
Memorex
009, 033, 049, 053, 060, 081, 087, 088, 091, 094,
Broksonic
086, 093
Calix
088
Metz
123, 124, 125, 126, 127, 128
Candle
006, 087, 088, 089, 090
MGA
001, 017, 027, 041, 097
Canon
049, 057
MGN Technology 087
Capehart
025, 055, 056, 071
Midland
011
Carver
015
Minolta
013, 023
CCE
095
Mitsubishi
001, 003, 008, 013, 014, 017, 027, 029, 039, 040,
Citizen
006, 007, 087, 088, 089, 090, 095
Craig
007, 087, 088, 091, 115
Motorola
Curtis Mathes
006, 049, 073, 080, 087, 090, 092
Montgomery Ward 001, 002, 007, 009, 049, 063, 081, 115, 117
Cybernex
087
MTC
009, 087, 094
Daewoo
025, 055, 059, 074, 089, 093, 095, 096
Multitech
007, 009, 011, 087, 090, 094
Daytron
025, 055
NAD
038
DBX
005, 085
NEC
004, 005, 006, 018, 026, 029, 045, 061, 062, 085
Dumont
053
Nikko
088
Dynatech
009
Noblex
087
Electrohome
001, 088, 097
Optimus
081, 088
Electrophonic
088
Optonica
021
Emerson
001, 009, 017, 027, 086, 088, 089, 092, 093, 097,
Panasonic
024, 049, 064, 066, 067, 068, 069, 107
100, 101, 102, 103, 104, 117
Perdio
009
009, 028, 031, 053, 054, 091, 098, 099, 115
Pentax
006, 013, 023, 058, 090
GE
007, 011, 049, 050, 051, 052, 073, 080, 087
Philco
015, 016, 049
Go Video
047, 048
Philips
015, 021, 042, 049, 105
Goldstar
006, 012, 062, 088, 129
Pilot
088
Gradiente
094
Pioneer
005, 013, 029, 036, 037, 038, 045, 085
Grundig
042
Portland
025, 055, 090
Harley Davidson
094
Proscan
063, 080
Harman Kardon
040, 062
Pulsar
060
Hi-Q
091
Quartz
033
Hitachi
009, 013, 023, 026, 058, 108, 109, 110, 111
Quasar
034, 035, 049
JC Penny
004, 005, 007, 023, 028, 049, 062,
Radio Shack
001, 002, 021, 081, 087, 088, 091, 094, 097, 098,
Fisher
115
041, 045, 097
115
085, 087, 088
Jensen
013, 026
26 From Disc-Player.com Denon Manuals
Downloaded
081
Radix
088
ENGLISH
Randex
088
Symphonic
009, 094
RCA
007, 013, 019, 023, 058, 063, 064, 065, 073, 080,
Tandy
009
082, 087
Tashiko
009, 088
009, 021, 031, 033, 049, 053, 081, 087, 088, 091,
Tatung
004, 026, 030
094, 097, 098
Teac
004, 009, 026, 094
Ricoh
055
Technics
024, 049
Salora
033, 041
Teknika
009, 010, 022, 049, 088, 094
Samsung
007, 011, 051, 059, 070, 083, 087, 089, 113
TMK
087, 092
Sanky
081
Toshiba
013, 017, 020, 041, 059, 089, 098, 099, 117
Sansui
005, 026, 029, 045, 061, 085, 114
Totevision
007, 087, 088
Sanyo
032, 033, 053, 087, 091, 115, 116
Unirech
087
SBR
042
Vecrtor Research
005, 062, 085, 089, 090
Scott
017, 020, 086, 089, 093, 117
Victor
005, 045, 046, 085
Sears
013, 023, 028, 031, 033, 053, 054, 088, 091, 098,
Video Concepts
005, 027, 085, 089, 090
099, 115
Videosonic
007, 087
Sentra
055
Wards
013, 021, 023, 087, 088, 089, 091, 094, 097, 118,
Sharp
001, 002, 021, 097
Shogun
087
XR-1000
094
Sony
075, 076, 077, 078, 079, 121, 122
Yamaha
004, 005, 006, 026, 062, 085
STS
023
Zenith
060, 078, 079
Sylvania
009, 015, 016, 017, 041, 049, 094
Realistic
Downloaded From Disc-Player.com Denon Manuals
119, 120
27
ENGLISH
(5) Operating the TV/video deck after storing its remote control signals in the preset memory
OFF
3-w
1
ON
VCR
REC
NTSC/PAL
SLEEP
SOURCE
TITLE
TIME
TV IN
T V
CLEAR
ENTER
A-B REPEAT
CHARAC.
SLIDE MODE
PROG/DIRECT
REPEAT
RANDOM
MODE
MEMO
BAND
DVD
TUNER
D.AUX
3
TV CH
EDIT/MENU
ZOOM
-
TV CH
+
TUNING /
TV VOL
1
2
MD/LINE-1
TAPE /LINE-2
4
5
6
+
-
5CH STEREO
AUTO DECODE
TUNER
3-q
+
7
8
9
DIRECT
STEREO
VIRTUAL
CALL
0/10
+10
-
TEST TONE
INPUT MODE
SURROUND
FUNCTION
CH
TUNER TV / VCR
DVD
IN/SURR.
A/V
SYSTEM
IN/SURR.
MD
CDR TAPE
1
2
2
9
6
-
7
STATUS
3
MUTING
SETUP
TONE /SDB
ENTER
SURROUND
PARAMETER
CH SELECT
DISPLAY
RETURN
3-w
ANGLE
VCR CH
MENU
AUDIO
+
TOP MENU
SUB TITLE
RC-936
1
Set mode switch 1 to the “A/V” position.
A/V
SYSTEM
2
Set mode switch 2 to the “TV/VCR” position.
TUNER TV / VCR
DVD
IN/SURR.
IN/SURR.
MD
CDR TAPE
3
Operate the video component.
• For details, refer to the component’s operating instructions.
It may not be possible to operate some models.
NOTE:
• The TV’s “TV (POWER) and “TV IN” buttons can be operated as
long as mode switch 1 is set to the “A/V” position, regardless of
the position of mode switch 2.
28 From Disc-Player.com Denon Manuals
Downloaded
Monitor TV (TV) and video deck (VCR) system buttons
q TV system buttons
TV
0~9
TV IN
TV VOL +, –
TV CH +, –
:
:
:
:
:
Power on/off
Channel numbers
TV input switching
Volume up/down
Channel switching
w Video deck system buttons
+
DVD
8
3-q
CD SRS
SEARCH MODE
3
VCR
: Power on/off
VCR CH +, – : Channel switching
6, 7
: Manual search (fast-forward and fast-backward)
1
: Play
3
: Pause
2
: Stop
ENGLISH
10 SETTING UP THE SYSTEM
(1) System setup items
• Once all connections with other AV components have been completed as described in “CONNECTIONS” (see pages 8 to 15), make the various
settings described below on the monitor screen using the ADV-M71’s on-screen display function.
• Use the following buttons to set up the system:
SYSTEM SETUP button
6
Press this to display the system setup menu.
-
7
STATUS
3
MUTING
SETUP
TONE /SDB
CURSOR buttons
1 and 0:Use these to move the cursors (1 and 0) to the left
and right on the screen.
ENTER
SURROUND
PARAMETER
CH SELECT
RETURN
DISPLAY
ANGLE
MENU
AUDIO
VCR CH
+
TOP MENU
SUB TITLE
• and ª: Use these to move the cursors (• and ª) to the up
and down on the screen.
ENTER button
Press this to switch the display.
Also use this button to complete the setting.
System setup items and default values (set upon shipment from the factory)
Setup
Default settings
TV Aspect
Quick set up
Speaker
Set the screen size and the speaker system.
4:3 PS
System Setup
Speaker Configuration
Delay Time
Channel Level
Input the combination of speakers in your system and
their corresponding sizes (SMALL for regular speakers,
LARGE for full-size, full-range) to automatically set the
composition of the signals output from the speakers and the
frequency response.
DVD auto power off setting
The power automatically switches to standby if no
operation is performed for 30 minutes while in the stop
mode with the function set to DVD.
Function Setting
Set the LINE-1 and LINE-2 function names and turn the
analog recording output (REC OUT) on or off.
Disc Setup
Set the audio language, subtitle language and disc menu
language for when playing discs.
Center Sp.
Surround Sp.
Sub Woofer
“__”
“__”
Yes
Small
Sw Freq. = 150 Hz / SW mode = None
This parameter is for optimizing the timing with which the
audio signals are produced from the speakers and subwoofer
according to the listening position.
At the listening position, listen to the test tones output
from the different speakers and set so that the playback
level from the different speakers is equal.
2CH Virtual & SW
Front Sp.
Front & Subwoofer
Center
Surround
9ft (2.7m)
“__”
“__”
Front L
Center
Front R
Surround R
Surround L
Sub Woofer
0 dB
“__”
0 dB
“__”
“__”
0 dB
power does not turn off automatically
LINE-1
LINE-2
REC OUT
MD
TAPE
ON
Dialog
Subtitle
Disc Menu
OFF
English
English
Wall Paper
OSD Setup
Set the wallpaper for the setup and operation screens.
Blue
DVD Setup
TV Aspect
Video Setup
TV Type
Video Mode
Black level
NTSC
AUTO
LIGHTER
Set the screen size and video system for the TV being used.
4 : 3 PS
Audio Setup
Set the digital audio signal format and the linear PCM
sampling frequency and bit conversion.
Ratings
Make the playback restriction setting for DVDs with
restricted viewing and set the password required for
changing the setting.
Other Setup
Make the closed caption setting for DVDs. (A commercially
available decoder is required to display the closed captions.)
Downloaded From Disc-Player.com Denon Manuals
Digital Out
LPCM Select
Normal
OFF
Rating Level
Pass Word Change
No Limit
0000 (Default)
Closed Caption
Slide Show
OFF
5SEC
29
ENGLISH
(2) Quick setup procedure
• Refer to “Connections” (pages 8 to 15) and check that all the connections are correct.
B
1
SURROUND / SELECT
DVD SURROUND RECEIVER ADV-M71
PUSH - PARAM.
-
+
BAND
MENU / SET
VIRTUAL SPEAKER
TONE / SDB
Turn on the power.
• The power indicator (LED) lights green, the power turns on
and the display lights.
VOLUME
FUNCTION
ON / STANDBY
Green
ON / STANDBY
PHONES
ON
1
Main unit
OFF
SLEEP
TITLE
TV IN
T V
ENTER
A-B REPEAT
CHARAC.
SLIDE MODE
EDIT/MENU
ZOOM
SOURCE
CLEAR
TV CH
TIME
-
PROG/DIRECT
REPEAT
RANDOM
MODE
MEMO
BAND
TV CH
+
CD SRS
SEARCH MODE
TUNING /
TV VOL
TUNER
D.AUX
1
2
3
MD/LINE-1
TAPE /LINE-2
4
5
6
+
-
DVD
Several seconds are required from the time the power button is
pressed until the power turns on. This is due to the built-in muting
circuit that turns off (mutes) the sound when the power is turned
on and off. The power indicator flashes green while the muting
circuit is activated.
Even when the power button has been pressed again and the
power has been set to the standby mode, power is still supplied to
some circuits. When leaving home or traveling, be sure to unplug
the power cord from the power outlet. In the standby mode, the
power indicator is lit red. The indicator is orange when the timer is
set.
1
ON
VCR
REC
NTSC/PAL
5CH STEREO
AUTO DECODE
TUNER
7
8
9
+
DIRECT
STEREO
VIRTUAL
CALL
0/10
+10
-
TEST TONE
INPUT MODE
SURROUND
FUNCTION
Remote control unit
CH
TUNER TV / VCR
DVD
IN/SURR.
A/V
SYSTEM
2
IN/SURR.
MD
CDR TAPE
1
2
+
DVD
8
Press the SETUP button to display the
setup screen.
9
6
-
7
Remote control unit
STATUS
3
2,12
SETUP
MUTING
SETUP
TONE /SDB
ENTER
SURROUND
PARAMETER
CH SELECT
DISPLAY
RETURN
ANGLE
MENU
AUDIO
VCR CH
4,6,8,11
3,5,7,9,10
+
TOP MENU
SUB TITLE
RC-936
3
Use the • and ª cursor buttons to
select “Quick System Setup”.
• The selected item is displayed in
yellow.
Remote control unit
30 From Disc-Player.com Denon Manuals
Downloaded
ENGLISH
4
Press the ENTER button to display the
menu’s setting screen.
On the setting screen, the selected
item is displayed in yellow and the
values of the other items are
displayed in green.
ENTER
6
[2] Speaker system settings
Remote control unit
[1] TV screen size setting
• “Return” is displayed in yellow.
• The currently set value is displayed in green.
• If you do not want to change the setting, press the ENTER
button at “Return”. The screen in step 2 reappears.
• To change the setting, proceed to step 7 below.
• The currently set value is displayed in yellow.
5
7
Use the • and ª cursor buttons to
select the desired TV screen size and
display type.
The selected TV screen size is
displayed in yellow and the
description is displayed in green.
Use the • and ª cursor buttons to
select the speaker system to be used.
Remote control unit
Remote control unit
8
Press the ENTER button to set the
selected setting.
• For settings other than “5.1-chanel
surround”, the setup screen in step 2
reappears.
/The setup mode is quit in step 12.
The setup mode can also be quit by
using the • and ª cursor buttons at
the setup screen to select “EXIT
SETUP” then pressing the ENTER
button.
• If “5.1-chanel surround” is selected,
the screen shown below appears.
ENTER
Remote control unit
[3] Room and listening position settings
6
Press the ENTER button to set the
selected setting.
• The screen shown below appears.
ENTER
Remote control unit
• The currently set value is displayed in green.
Downloaded From Disc-Player.com Denon Manuals
31
ENGLISH
9
About the speaker system settings
Use the • and ª cursor buttons
to select “Room Settings”, then
use the 0 and 1 cursor buttons
to set the size of the room.
• The set size is displayed in
yellow.
B
2CH VIRTUAL
Select this when only using with the two speakers for the front
channels.
B
2CH VIRTUAL & SW
Select this when using two speakers for the front channels and
a subwoofer with built-in amplifier.
• Settings
Front
: Small
Subwoofer
: Yes
Subwoofer frequency : 150 Hz
Set the front speakers and subwoofer at equal distances.
B
5.1CH SURROUND
Select this when using two speakers for the front channels, a
center speaker, two speakers for the surround channels and a
subwoofer with built-in amplifier.
• Settings
Front
: Small
9ft (2.7m)
Center
: Small
8ft (2.4m)
Surround
: Small
7ft (2.1m)
Subwoofer
: Yes
9ft (2.7m)
Subwoofer frequency : 150 Hz
The room setting is set to “MED.”, the listening position to
“BACK”.
Remote control unit
10
Use the • and ª cursor buttons
to select “Listening Position”,
then use the 0 and 1 cursor
buttons to set the position.
• The set position is displayed in
yellow.
Remote control unit
11
Press the ENTER button to end the
settings.
• The screen in step 2 reappears.
ENTER
Remote control unit
12
Press the SETUP button to quit the
setup mode.
The setup mode can also be quit by
using use the • and ª cursor buttons
at the setup screen to select “EXIT
SETUP” then pressing the ENTER
button.
32 From Disc-Player.com Denon Manuals
Downloaded
SETUP
Remote control unit
NOTE:
• The speaker system is set to “2CH VIRTUAL & SW” upon
shipment from the factory. It is not possible to achieve the
normal bass sound using this setting but with only speakers for
the two front channels. If only using speakers for the two front
channels, change the setting to “2CH VIRTUAL”.
ENGLISH
(3) Detailed system setup (changing the system settings)
• The quick system settings and original settings set upon shipment from the factory are changed using the system setting changing menu. The
settings are stored in the memory until they are changed the next time, and remain valid even when the power is turned off.
[1] Speaker settings (type of speaker and whether or not the speaker is connected)
• The output component of the different channels and properties are adjusted automatically according to the combination of speakers actually
used.
1
Press the SETUP button to display the
setup screen.
SETUP
3
ENTER
Remote control unit
Remote control unit
Remote control unit
When the cursor is at a tag icon on the system setting
changing menu screen, the settings screen can also be
selected by pressing the ª cursor button. You can return to
the tag icon by pressing the • cursor button.
• The speaker settings screen in step 4 appears.
4
Use the •, ª, 0 and 1 cursor buttons to select whether or
not the various speakers are connected, their size and other
parameters.
CENTER SPEAKER
2
Use the • and ª cursor buttons to select “SYSTEM SETUP”
under “<ADVANCED SETUP>”, then press the ENTER
button.
FRONT SPEAKERS
SUB WOOFER
Remote control unit
ENTER
SURROUND
SPEAKERS
• The item currently being set is displayed in yellow, and the
setting values for other items are displayed in green.
Remote control unit
3
Remote control unit
At the system setting changing menu, use the 0 and 1
cursor buttons to select the “SPEAKER CONFIGURATION”
tag icon, then press the ENTER button.
5
Press the ENTER button to enter the
settings.
• The next screen in the system setting
changing menu appears.
ENTER
Remote control unit
Downloaded From Disc-Player.com Denon Manuals
33
ENGLISH
NOTE:
• Select the speaker size not by the physical size of the speaker
but by the speaker’s capacity to reproduce low frequencies of
100 Hz or less. If you do not know, determine the best setting by
comparing the sound when the setting is set to “Small” and
“Large”, keeping the volume low enough to prevent damage to
the speaker.
Subwoofer (SW FREQ.) frequency
• For the subwoofer frequency at the speaker setting screen, set
the bass crossover frequency for playback from the subwoofer.
• Select “80 Hz”, “120 Hz”, “150 Hz” or “180 Hz” (-6 dB for
each). Bass sound below these frequencies is played from the
subwoofer.
(This is set to “150 Hz” by factory default.)
NOTE:
• Select “Large” or “Small” not according to the actual size of the
speaker but according to the speaker’s capacity for playing low
frequency (approximately 100 Hz and below) signals. If you do
not know, try comparing the sound at both settings (setting the
volume to a level low enough so as not to damage the speakers)
to determine the proper setting.
Assignment of low frequencies
• In the Dolby Digital, Dolby Pro Logic II, DTS, and virtual surround
modes, the low frequency signals for channels whose speaker
settings are set to “Small” are assigned to the subwoofer. The
low frequencies of channels set to “Large” are played from
those channels.
(If set to “120 Hz”, channels set to “Small” play sounds of 120
Hz and greater, while bass frequencies of under 120 Hz are
played from the subwoofer.)
• In surround modes other than the ones listed above, low
frequencies below the frequency set at the subwoofer frequency
setting are played from the subwoofer regardless of whether the
speakers are set to “Large” or “Small”.
• Set the subwoofer frequency according to the low frequency
playback abilities of your speakers and subwoofer.
Parameters
Large…… Select this when using speakers that can fully reproduce
low sounds of below 100 Hz.
Small…… Select this when using speakers that do not provide
sufficient volume for playing low frequencies of 100 Hz
and less. When this setting is made, frequencies below
the frequency set at the subwoofer frequency setting
are assigned to the subwoofer.
None…… Select this when no speakers are installed.
Yes/No…. Select “Yes” when a subwoofer is installed, “No” when
a subwoofer is not installed.
If the subwoofer has sufficient low frequency playback capacity,
good sound can be achieved even when “Small” is set for the
front, center and surround speakers.
For the majority of speaker system configurations, using the
SMALL setting for all five main speakers and Subwoofer On
with a connected subwoofer will yield the best results.
34 From Disc-Player.com Denon Manuals
Downloaded
Subwoofer mode
• The subwoofer mode setting is only valid when “LARGE” is set
for the front speakers and “YES” is set for the subwoofer in the
“SPEAKER CONFIGURATION” settings.
• When the “LFE+MAIN” playback mode is selected, the low
frequency signal range of channels set to “LARGE” are produced
simultaneously from those channels and the subwoofer channel.
In this playback mode, the low frequency range expand more
uniformly through the room, but depending on the size and shape
of the room, interference may result in a decrease of the actual
volume of the low frequency range.
• Selection of the “LFE ” play mode will play the low frequency
signal range of the channel selected with “LARGE” from that
channel only. Therefore, the low frequency signal range that are
played from the subwoofer channel are only the low frequency
signal range of LFE (only during Dolby Digital or DTS signal
playback) and the channel specified as “SMALL” in the setup
menu.
• Select the play mode that provides bass reproduction with body.
• When the subwoofer is set to “YES”, bass sound is output from
the subwoofer regardless of the subwoofer mode setting in
surround modes other than Dolby/DTS.
ENGLISH
[2] Delay time (distance setting)
• Input the distances from the listening position and the various speakers to set the surround delay time.
• Upon shipment from the factory default the delay time is set to the default values in step 3 below.
Preparation:
Measure the distance from the listening position to the various speakers.
FL
Center
SL
FR
L1: Distance between center speaker
and listening position
L2: Distance between front speakers
and listening position
L3: Distance
between
surround
speakers and listening position
SR
Listening position
1
2
If you are not at the system setting changing menu screen,
read step 1 and 2 on page 33.
4
At the system setting changing menu screen, use the 0 and
1 cursor buttons to select “DELAY TIME (Distance)”, then
press the ENTER button.
Use the • and ª cursor buttons to select the speaker, then
use the 0 and 1 cursor buttons to set the distance between
the speaker and the listening position.
• The distance changes by 0.1 meters (or 1 foot when the
unit is set to feet) each time the 0 and 1 cursor button is
pressed. Select the value closest to the measured distance.
ENTER
Remote control unit
Remote control unit
• The delay time setting screen appears.
Make sure the difference in the distances set for the
various speakers is no greater than 3.0 meters (10 feet).
If an inappropriate distance is set, “CAUTION: OUT OF
SETTING RANGE” is displayed. Change the position of the
speaker and make the setting over.
5
• The unit for the distance can be switched between “m”
(meters) and “ft” (feet) using the 0 and 1 cursor buttons.
If you do not want to change the unit, press the ª cursor
button to proceed to the next step.
3
Press the ENTER button to enter the
settings.
• The next screen in the system setting
changing menu appears.
ENTER
Remote control unit
At “Default Value”, select “Yes” to set the delay times for the
different speakers to the default values.
B
B
Yes: The values are set to the defaults.
No: The current settings are retained.
Downloaded From Disc-Player.com Denon Manuals
35
ENGLISH
[3] Adjusting the channel level
• Adjust so that the playback levels of the different channels are equal.
• Make this adjustment by listening to the test tones output from the speakers at the listening position.
• By factory default all the levels of all the channels are set to 0 dB.
• This adjustment can also be made directly from the remote control unit. (CH SELECT Button)
1
2
If you are not at the system setting changing menu screen,
read step 1 and 2 on page 33.
6
q When “Auto” is selected at “Test Tone”:
At the system setting changing menu screen, use the 0 and
1 cursor buttons to select “Channel Level Adjustment”, then
press the ENTER button.
ENTER
Remote control unit
Remote control unit
• The channel level adjustment screen appears.
• Test tones are automatically output from the speakers at
intervals of 4 seconds for two of the cycles shown below,
then at intervals of 2 seconds from the third cycle on.
Front left
Subwoofer
Center
Surround left
Front right
Surround right
Use the 0 and 1 cursor buttons to adjust the channel levels
so that the volume of the test tones output from the different
speakers sounds the same.
• The level changes in units of 1 dB each time the 0 and 1
cursor button is pressed.
The level can be adjusted in the range –12 dB to +12 dB.
w When “Manual” is selected at “Test Tone”:
3
Use the 0 and 1 cursor buttons to
select “Auto” or “Manual” for the
“Test Tone” mode.
• The selected setting is displayed
in yellow.
Remote control unit
B
B
4
Adjust the levels listening to test tones
automatically output from the different speakers.
Manual: Select the speakers from which the test tones are
output when adjusting the levels.
Detailed settings can be made when this is set to
“Manual” first.
Use the • and ª cursor buttons to select the speaker from
which the test tone is to be output, then use the 0 and 1
When “Yes” is selected at “Level Clear”, the level settings
for all the speakers are set to 0 dB.
cursor buttons to adjust the channel levels so that the volume
Yes: The level settings for all the speakers are set to 0 dB.
No: The currently set level settings are retained.
the same.
• The level changes in units of 1 dB each time the 0 and 1
cursor button is pressed.
The level can be adjusted in the range –12 dB to +12 dB.
B
B
5
Auto:
Adjust the channel levels in the test tone mode.
Use the • and ª cursor buttons to select the “Test Tone
Start” mode, then use the 0 cursor button to select “Yes”.
The test tone is output.
Use the MASTER VOLUME control on the main unit or the
VOLUME buttons on the remote control unit to adjust the
volume of the test tone to a level at which it is easy to
make this adjustment.
36 From Disc-Player.com Denon Manuals
Downloaded
of the test tones output from the different speakers sounds
ENGLISH
7
Press the ENTER button to enter the
settings.
• The next screen in the system setting
changing menu appears.
ENTER
4
Press the ENTER button to enter the
settings.
• The next screen in the system setting
changing menu appears.
Remote control unit
To cancel the settings after the adjustments have been made
Display the channel level adjustment screen, then use the •, ª, 0
and 1 cursor buttons to select “Level Clear” and select “Yes”.
The level settings for all the speakers are set to 0 dB.
NOTE:
When the channel levels are adjusted at the channel level settings,
the adjusted values are applied to all playback modes.
[4] DVD Auto Power Off setting
• The ADV-M71 is equipped with a function for automatically setting
the power to the standby mode if no operation is performed for 30
minutes when the function is set to DVD. Here set whether to use
this function or not.
• By factory default this is set to “No”.
1
2
ENTER
Remote control unit
[5] Function settings
• Set the LINE-1 and LINE-2 function names and turn the analog
recording output (REC OUT) on or off.
• When used in combination with the D-M31 series, set according to
the components being used and make system connections for
convenient system functions.
• It is also possible to assign the D.AUX digital input to LINE-2.
1
2
If you are not at the system setting changing menu screen,
read step 1 and 2 on page 33.
At the system setting changing menu screen, use the 0 and
1 cursor buttons to select “FUNCTION ASSIGNMENT”, then
press the ENTER button.
If you are not at the system setting changing menu screen,
read step 1 and 2 on page 33.
ENTER
At the system setting changing menu screen, use the 0 and
1 cursor buttons to select “DVD AUTO POWER OFF”, then
Remote control unit
press the ENTER button.
Remote control unit
• The input function setting screen appears.
ENTER
Remote control unit
Remote control unit
• The DVD auto power off setting screen appears.
3
Use the • and ª cursor buttons to select the item to be set,
then use the 0 and 1 cursor buttons to make the settings.
B
LINE-1 Function name selection (“MD” by default)
AUX
B
3
CD-R
B
B
Yes: The function for automatically turning the power off
when the function is set to DVD is activated.
No: The auto power off function is not activated.
Downloaded From Disc-Player.com Denon Manuals
MD/CD-R
LINE-2 Function name selection (“TAPE” by default)
TAPE
Use the 0 and 1 cursor buttons to select the “Auto Power
Off” mode.
MD
AUX
D.AUX
LINE-1/LINE-2 REC OUT
: Set whether to turn the recording output during playback in
the Dolby Virtual Speaker mode when the function set to
DVD or the D.AUX exclusive digital input on or off.
On : The signals are output in stereo. (Factory default)
Off : The signals are not output. (Recording is not
possible.)
B
37
ENGLISH
4
11 PLAY BACK
Press the ENTER button to enter the
settings.
• The next screen in the system setting
changing menu appears.
ENTER
(1) Before Operating
Remote control unit
B
Input function settings
• LINE-1 and LINE-2 can be set as described below.
LINE-1 : “MD”, “CD-R”, “MD/CD-R” or “AUX” can be
selected.
(“MD/CD-R” can only be set when a system MD
recorder, cassette deck and CD recorder are all
connected and system operations are being used.)
LINE-2 : This can be set to “TAPE”, “MD”, “AUX” or “D.AUX”.
(Set “D.AUX” to use the D.AUX digital input in
combination with the LINE-2 analog input.)
• The setting for LINE-1 has priority. Once a function is set for
LINE-1, it is not possible to set the same function for LINE-2. (For
example, if “MD” is selected for LINE-1, “MD” is no longer
offered as one of the choices for LINE-2.)
SURROUND / SELECT
DVD SURROUND RECEIVER ADV-M71
PUSH - PARAM.
-
PHONES
2
OFF
TITLE
TV IN
T V
CLEAR
ENTER
A-B REPEAT
CHARAC.
SLIDE MODE
EDIT/MENU
ZOOM
PROG/DIRECT
REPEAT
RANDOM
TIME
-
MODE
MEMO
BAND
DVD
TUNER
D.AUX
TV CH
+
CD SRS
SEARCH MODE
TUNING /
TV VOL
1
2
MD/LINE-1
TAPE /LINE-2
4
5
6
+
-
5CH STEREO
AUTO DECODE
TUNER
3
+
7
8
9
DIRECT
STEREO
VIRTUAL
CALL
0/10
+10
-
TEST TONE
INPUT MODE
SURROUND
FUNCTION
CH
TUNER TV / VCR
DVD
IN/SURR.
A/V
SYSTEM
IN/SURR.
MD
CDR TAPE
1
2
+
DVD
8
9
6
-
7
STATUS
3
MUTING
SETUP
TONE /SDB
ENTER
(4) After changing the system settings
SURROUND
PARAMETER
CH SELECT
-
• This completes the procedure for changing the system settings.
Once the speaker settings, delay times and channel levels have
been set, there is no need to change the settings again unless the
connected AV components or speakers are changed or the
speakers are moved to different positions.
• DVD auto power off and function settings as necessary.
Remote control unit
2
ON
VCR
REC
NTSC/PAL
SLEEP
TV CH
1
BAND
VOLUME
ON / STANDBY
LINE-1/LINE-2 analog recording output setting
• Normally set this to “On”.
• With the DVD or D.AUX exclusive digital input function, set this
to “Off” if noise is generated when playing sources with high bit
rates in the Dolby Virtual Speaker mode.
• This setting is only valid in the Dolby Virtual Speaker mode for the
DVD or D.AUX exclusive digital input function. (In surround
modes other than the Dolby Virtual Speaker mode and with other
input functions, analog recording signals are output, regardless of
this setting.)
• Analog recording is not possible when this is set to “Off”. To
record, use a mode other than the Dolby Virtual Speaker mode
(stereo, for example).
SETUP
TONE / SDB
FUNCTION
SOURCE
At the system setting changing menu
screen, press the SETUP button.
• The new settings are entered and the
on-screen display turns off.
+
MENU / SET
VIRTUAL SPEAKER
DISPLAY
RETURN
ANGLE
MENU
AUDIO
VCR CH
+
TOP MENU
SUB TITLE
RC-936
1
2
Refer to “CONNECTIONS” (pages 8 to 15) and check that all
connections are correct.
Turn on the power.
Press the POWER
button.
ON / STANDBY
Light
(green)
ON
The setup procedure can be quit at any point by pressing this
button.
Main unit
NOTE:
• When system settings have been changed with the system
setting changing menu and a speaker system is selected with
the quick system settings, the speaker settings and delay time
settings are changed to the values preset for the quick system
settings.
38 From Disc-Player.com Denon Manuals
Downloaded
Remote control unit
When pressed, the power turns on and the display lights. The
sound is muted for several seconds, after which the unit
operates normally. When pressed again, the power turns off,
the standby mode is set and the display turns off.
Whenever the ON/STANDBY button is in the STANDBY state,
the apparatus is still connected on AC line voltage. Please be
sure to unplug the cord when you leave home for, say, a
vacation.
ENGLISH
(2) Loading Disc
2 Set discs in the disc tray with the labeled (printed) side facing up.
Figure 2
Inner disc tray
12 cm disc guide
8 cm disc guide
8 cm disc
Disc tray
NOTE:
• Do not move the this unit while a disc is playing. Doing so
may scratch the disc.
NOTES:
• If a foreign object is caught in the disc tray during closing,
simply press the OPEN/CLOSE button again and the tray will
open.
• Do not press the disc tray in by hand when the power is off.
Doing so will damage it.
• Do not place foreign objects in the disc tray. Doing so will
damage it.
(1) Opening and Closing the Disc Tray
q Turn on the power.
w Press the OPEN/CLOSE button.
OPEN/CLOSE button
(3) Selecting the video output
• Factory default: interlace, 525i.
• When a TV compatible with progressive 525p inputs is connected,
the setting can be switched using the operation described below.
Disc tray
NOTES:
• Even when the power is in the standby mode, when the
OPEN/CLOSE button is pressed, the ADV-M71’s power turns
on and the disc tray operates. (Auto power on function)
• Even if the function is set to something other than DVD,
when the OPEN/CLOSE button is pressed, the function
switches to DVD and the disc tray operates. (Auto function
select function)
• Do not strike on the button with a pencil, etc.
(2) Loading Discs
• Pick up the disc carefully so as not to touch the signal surface and
hold it with the labeled side facing up.
• With the disc tray fully open, set the disc in the disc tray.
• Set 12 cm discs in the outer tray guide (Figure 1), 8 cm discs in the
inner tray guide (Figure 2).
• Press the OPEN/CLOSE button. The disc is automatically loaded.
• The disc tray can also be closed automatically to load the disc by
pressing the PLAY button.
Figure 1
1
With the function set to “DVD”, press the MENU/SET
button for at least 2 seconds.
• The current setting (“INTERLACED” or “PROGRESSIVE”)
is displayed after “VIDEO OUT”.
MENU / SET
Main unit
2
Turn the surround/select control while the setting is
displayed to switch it.
• The setting switches alternately between “INTERLACED”
and “PROGRESSIVE”.
• The normal display reappears if no operation is performed
for several seconds.
SURROUND / SELECT
PUSH - PARAM.
Main unit
NOTE:
• When “PROGRESSIVE” is set, no video signals are output
from the VIDEO OUT or S-VIDEO OUT terminals. Set
“INTERLACED” if you want to use the VIDEO OUT or SVIDEO OUT signals.
Outer disc tray
12 cm disc
Downloaded From Disc-Player.com Denon Manuals
39
ENGLISH
(3) Playback
IMPORTANT SETUP INFORMATION
This set has the following presettings:
“DISC SETUP”, “OSD SETUP”, “VIDEO SETUP”, “AUDIO SETUP”,
“RATINGS”, and “OTHER SETUP”.
These presettings have been preset upon shipment from the factory.
If you wish to change them to suit your specific purposes, refer to
pages 91 to 103.
OFF
(3)-3
T V
ENTER
A-B REPEAT
CHARAC.
SLIDE MODE
PROG/DIRECT
REPEAT
RANDOM
MODE
MEMO
BAND
DVD
-
TV CH
TUNING /
TV VOL
D.AUX
TUNER
+
CD SRS
SEARCH MODE
1
2
MD/LINE-1
TAPE /LINE-2
4
5
6
+
-
5CH STEREO
AUTO DECODE
TUNER
3
+
7
8
9
DIRECT
STEREO
VIRTUAL
CALL
0/10
+10
-
TEST TONE
INPUT MODE
SURROUND
FUNCTION
CH
TUNER TV / VCR
DVD
IN/SURR.
SURROUND / SELECT
DVD SURROUND RECEIVER ADV-M71
TIME
EDIT/MENU
ZOOM
CLEAR
A/V
B
TITLE
TV IN
TV CH
(3)-5
(3)-2,(3)-4
(3)-1
ON
VCR
REC
NTSC/PAL
SLEEP
SOURCE
SYSTEM
PUSH - PARAM.
IN/SURR.
MD
(4)-1
CDR TAPE
TONE / SDB
(3)-5
+
BAND
MENU / SET
VIRTUAL SPEAKER
1
2
+
DVD
8
VOLUME
6
(3)-8
9
-
FUNCTION
7
ON / STANDBY
PHONES
STATUS
3
MUTING
SETUP
TONE /SDB
(3)-7
(3)-6
ENTER
(3)-1
(3)-8 (4)-1
SURROUND
PARAMETER
CH SELECT
-
1
Turn on the power.
• Press the power button, the power indicator lights and the
power turns on.
ON / STANDBY
Light
(green)
4
VCR CH
+
Press the OPEN/CLOSE button.
ON
Main unit
Main unit
2
Remote control unit
Press the OPEN/CLOSE button to open the disc tray.
5
Press the PLAY button.
• For many interactive DVDs and video CDs with playback
control, a menu screen appears. In this case use the
procedure in step 6 to select the desired item.
Interactive DVDs are DVDs including multiple angles,
stories, etc.
1
Main unit
3
Set the disc in the disc tray.
DVD
Main unit
Example: For DVDs with menu
screens
TOP MENU
Apple
Banana
Orange
Strawberry
Peach
Pineapple
Remote control unit
Example: For video CDs with
playback control
1. Opening
2. 1st movement
3. 2nd movement
40 From Disc-Player.com Denon Manuals
Downloaded
4. 3rd movement
5. Ending
ENGLISH
6
Use the cursor buttons (•, ª, 0 and 1) to select the desired
item.
• For some discs there is a second menu screen. If so, press
the 9 button to display the next menu screen. (See the
disc’s jacket.)
8
Either turn the main unit’s main volume control or use the
main volume control buttons on the remote control unit to
adjust the volume.
The volume is shown
on the display.
M.VOLUME -20
The cursor buttons (•, ª, 0 and 1) do not work for video
CDs. Use the number buttons to select the desired item.
+
VOLUME
Main unit
Remote control unit
Remote control unit
7
Press the ENTER button.
• The desired item is selected and playback starts.
• You can return to the menu screen by pressing the TOP
MENU button while the DVD is playing, though this
depends on the disc.
• Press the RETURN button during playback of a video CD to
return to the menu screen.
ENTER
Example: When “Apple” is
selected
Remote control unit
For detailed instructions on operations for the surround
modes and surround parameters, see “12 Operating the
Surround Functions” on pages 43 to 61.
• In the “AUTO” input mode, the signals of the disc being
played are identified, Dolby Digital, DTS or PCM decoding
is selected automatically and the disc is played.
• In the Dolby Virtual Speaker surround mode, the signals of
the disc being played are automatically decoded in Dolby
Digital or DTS then played in the Dolby Virtual Speaker
surround mode.
• In the “AUTO DECODE” surround mode when a 5.1channel speaker system is set, the signals of the disc being
played are identified and automatically decoded in Dolby
Digital, DTS or Auto Stereo and the disc is played.
NOTES:
TOP MENU
Apple
Banana
Orange
Strawberry
Peach
Pineapple
Apple
• If
appears on the TV screen while buttons are being
operated, that operation is not possible on the ADV-M71 or with
that disc.
• Set the disc in the disc guide.
• Only set one disc in the tray.
• The disc keeps turning while the menu screen is displayed on the
TV screen.
(4) Stopping Playback
1
During playback, press the STOP button on the main unit or
the remote control unit, playback stops and wall paper is
displayed.
<Resume play memory function (DVD only)>
• With the ADV-M71, when the STOP button is pressed, that
position is stored in the memory. At this time, “1” flashes
on the display. When the PLAY button is pressed after
pressing the STOP button, playback resumes from the
position at which it was stopped.The resume play memory
function is canceled if the disc tray is opened or the STOP
button is pressed a second time.
About the DVD standby function
When the ADV-M71’s function is set to DVD, the DVD
standby mode is set automatically if the disc remains in the
stop mode for approximately 10 minutes.
• In the DVD standby mode, the DVD section’s power is
off and output of the video signals is also off.
The ADV-M71’s display reads “DVD standby” at this
time.
• When in the DVD standby mode, the power of the
sections other than the DVD section is on and function
switching and other operations can be performed on the
main unit and remote control unit. When a DVD control
button (the play/pause and button open/close buttons on
the main unit, the play button on the remote control unit,
etc.) is operated, the DVD section’s power turns on
automatically and disc playback and opening/closing of
the disc holder can be performed.
Downloaded From Disc-Player.com Denon Manuals
BAND
Main unit
2
Remote control unit
The resume play memory function only works for
discs for which the elapsed time is shown on the
display during playback.
Auto power off function.
• The ADV-M71 is equipped with a function that
automatically switches the power to standby if no
operation is performed for 30 minutes while in the stop
mode with the function set to DVD.
• This function is set to off upon shipment from the
factory. If you wish to turn it on, set the “DVD AUTO
POWER OFF” setting to “YES” as described on page 37.
NOTE:
• The DVD standby function only turns off the power of the DVD
section. It is different from the DVD auto power off function set
with the system settings in Setup in that the DVD section
remains functional.
41
ENGLISH
(5) Playing Still Pictures (Pausing)
1
During playback, press the 13 button on the main unit or the
3 button on the remote control unit.
• Press the PLAY button to resume normal playback.
3
Main unit
(5)-1
(7)-1
Remote control unit
+
7
8
9
DIRECT
STEREO
VIRTUAL
CALL
0/10
+10
-
TEST TONE
INPUT MODE
SURROUND
FUNCTION
CH
TUNER TV / VCR
DVD
IN/SURR.
A/V
SYSTEM
IN/SURR.
MD
CDR TAPE
B
(7)-1
SURROUND / SELECT
DVD SURROUND RECEIVER ADV-M71
PUSH - PARAM.
1
+
MENU / SET
VIRTUAL SPEAKER
(6)-1,(9)-1
BAND
TONE / SDB
VOLUME
FUNCTION
+
DVD
8
-
2
6
9
-
7
STATUS
3
MUTING
ON / STANDBY
PHONES
(5)-1,(8)-1
SETUP
TONE /SDB
ENTER
SURROUND
PARAMETER
CH SELECT
-
VCR CH
+
(6) Forward / Reverse Searching
1
Playing position
During playback, press one of the 6 / 7 buttons on the
remote control unit.
6
: Reverse direction
7
: Forward direction
• When pressed again, the search speed increases (DVD,
VIDEO CD in seven steps, CD in four steps).
• Press the PLAY button to resume normal playback.
6
Chapter/Track Chapter/Track Chapter/Track
Reverse direction , / Forward direction (direction of playback)
NOTE:
• In some cases the menu screen may reappear when one of
the 8 / 9 buttons is pressed during menu playback
on a video CD.
7
Searching using the number buttons
q During playback, press the search mode button on the
remote control unit.
• The mode switches as shown below each time the
button is pressed:
For DVDs
: Title , / Chapter
For CDs and video CDs : Track (no switching)
The search mode set by pressing the search mode
button is stored in the memory until the power is
turned off.
w Use the number buttons on the remote control unit to
input the number of the title, chapter or track to be played.
Some DVDs or video CDs may be designed to operate
in special ways and will not operate as described here.
Remote control unit
NOTE:
• In some cases the menu screen may reappear when one of
the 6 / 7 buttons is pressed during menu playback on
a video CD.
(7) Skipping to the Beginning of Chapters or Tracks
1
During playback, press one of the skip buttons on the main
unit or the remote control unit.
8/
: Reverse direction (PREVIOUS)
9/
: Forward direction (NEXT)
• A number of chapters or tracks equal to the number of
times the button is pressed is skipped.
• When the skip back button is pressed once, the pickup
returns to the beginning of the currently playing chapter or
track.
-
+
8
(8) Playing Frame by Frame (for DVDs and video CDs only)
1
During playback, press the 3 button on the remote control
unit.
• The picture moves forward one frame each time the button
is pressed.
• Press the PLAY button to resume normal playback.
9
3
Main unit
Remote control unit
Remote control unit
42 From Disc-Player.com Denon Manuals
Downloaded
Chapter/Track
ENGLISH
(9) Slow Playback (for DVDs and video CDs only)
6
1
In the still mode, press one of the 6 / 7 buttons on the
remote control unit.
6
: Reverse direction
7
: Forward direction
• When pressed again, the slow play speed increases.
(Four step) (Three step on video CDs)
• Press the PLAY button to resume normal playback.
7
Remote control unit
NOTE:
• Reverse slow play is not possible on video CDs.
12 OPERATING THE SURROUND FUNCTIONS
5
6
-
5CH STEREO
AUTO DECODE
TUNER
7
8
9
+
DIRECT
STEREO
VIRTUAL
CALL
0/10
+10
-
TEST TONE
INPUT MODE
SURROUND
FUNCTION
4
B
CH
SURROUND / SELECT
DVD SURROUND RECEIVER ADV-M71
PUSH - PARAM.
+
-
BAND
MENU / SET
VIRTUAL SPEAKER
TONE / SDB
2
TUNER TV / VCR
DVD
IN/SURR.
A/V
VOLUME
SYSTEM
1
3
IN/SURR.
MD
CDR TAPE
FUNCTION
1
ON / STANDBY
2
+
PHONES
DVD
8
6
5
9
-
7
STATUS
3
13 5
MUTING
SETUP
TONE /SDB
ENTER
SURROUND
Input mode setting
1
Press the FUNCTION button to select the input function to be
played.
FUNCTION
FUNCTION
Main unit
Remote control unit
• The function switches as shown below.
• Factory default (LINE 1) = MD, (LINE 2) = TAPE
DVD
2
TUNER
(LINE1)
(LINE2)
D.AUX
When DVD, D.AUX or (LINE1) = MD was selected as the
input function, press the remote control unit’s INPUT MODE
button to select the input mode.
INPUT MODE
Remote control unit
AUTO
PCM
DTS
ANALOG
• “ANALOG” cannot be selected when DVD or D.AUX was
selected as the input function.
• “ANALOG” can be selected when “LINE-2” is set to
“D.AUX” at “FUNCTION ASSIGNMENT” under “SYSTEM
SETUP” in the detailed settings.
Downloaded From Disc-Player.com Denon Manuals
Input mode selection function
• The input mode can be selected when the input function is
set to DVD, D.AUX or (LINE1) = MD.
• Different input modes can be selected for each input
function. The selected input mode is stored in the memory
for the individual input functions.
• When the input function is set to something other than the
above, “ANALOG ONLY” is displayed and the input mode
cannot be selected.
q AUTO (auto mode)
In this mode, the type of signal being input to the digital
and analog input terminals is detected and the program in
the set’s surround decoder is switched automatically to
play the signals for the selected input function.
The presence or absence of digital signals is detected, the
signals input to the digital input are identified and decoding
and playback are performed automatically in DTS, Dolby
Digital or PCM (2 channel stereo) format.
If no digital signal (LINE1) = MD is being input, the analog
input jacks are selected.
Use this mode to play Dolby Digital signals.
w PCM (exclusive PCM signal playback mode)
Decoding and playback are only performed when PCM
signals are being input.
e DTS (exclusive DTS signal playback mode)
Decoding and playback are only performed when DTS
signals are being input.
r ANALOG (exclusive analog audio signal playback mode)
The signals input to the analog input jacks are played.
(This cannot be selected in the DVD mode.)
The input mode automatically switches to “AUTO” if you
switch the input function to DVD from anything other than
DVD.
43
ENGLISH
3
Either turn the SURROUND/SELECT dial or press the
SURROUND button on the remote control unit to select the
surround mode.
Input mode display
Lit
• In the AUTO mode
SURROUND / SELECT
One of these lights, depending on
the input signal.
SURROUND
PUSH - PARAM.
• In the DIGITAL PCM mode
Main unit
Remote control unit
• The function switches as shown below.
• The function only changes in the “Æ” direction when
operated from the remote control unit.
DOLBY VS
STEREO
DIRECT
*5CH STEREO
*MONO MOVIE
JAZZ CLUB
DOLBY VS
VIDEO GAME
• In the DIGITAL DTS mode
• In the ANALOG mode
*AUTO DECODE
ROCK ARENA
*MATRIX
Input signal display
• The modes marked “*” can be selected when “5.1channel surround” is selected in the quick system setup.
• DOLBY DIGITAL
4
Start playback on the selected component.
• For operating instructions, refer to the component’s
manual.
• DTS
5
Either turn the MASTER VOLUME dial on the main unit or
use the VOLUME buttons on the remote control unit to
adjust the volume.
The volume level is displayed
on the display.
M.VOLUME -20
• PCM
• “DIG” lights when digital signals are input properly. If “DIG” is
flashing, check whether the connections are proper and whether
the input component’s power is on.
+
VOLUME
Main unit
Remote control unit
• The volume can be adjusted within the range –60 to 0 to
+18 dB. Note that depending on the input signal, surround
mode, speaker settings and channel level setting, it may
not be possible to adjust the volume up to +18 dB.
2 To check the currently playing program source, etc.
Press the MENU/SET button. Display “STATUS” then turn
the SURROUND/SELECT control.
MENU / SET
Main unit
SURROUND / SELECT
PUSH - PARAM.
Main unit
STATUS
Remote control unit
To perform this operation on the remote control unit, press
the STATUS button.
The current program source and surround settings are shown
on the display each time the button is pressed or turned.
(When the function is set to DVD, the information is also
displayed on the TV screen.)
44 From Disc-Player.com Denon Manuals
Downloaded
Input mode when playing CD sources
• When playing CDs containing recordings of live concerts, etc., in
the “AUTO” mode, the sound may be slightly broken at the
beginning. If this happens, switch to the “PCM” mode.
Input mode when playing DTS sources
• If DTS-compatible CDs are played in the “PCM” mode, noise is
output because DTS playback is not possible.
To play a DTS-compatible source, be sure to set the input mode
to “AUTO” or “DTS”.
• Noise may be generated at the beginning of playback and while
searching during DTS playback in the AUTO mode. If so, play in
the DTS mode.
ENGLISH
After starting playback
[1] Adjusting the sound quality (TONE/SDB)
The TONE/SDB function will not work in the direct mode.
[2] Turning the sound off temporarily (MUTING)
TEST TONE
2
INPUT MODE
SURROUND
FUNCTION
TUNER TV / VCR
DVD
IN/SURR.
A/V
SYSTEM
IN/SURR.
MD
CDR TAPE
B
1
2
+
SURROUND / SELECT
DVD SURROUND RECEIVER ADV-M71
PUSH - PARAM.
DVD
8
TONE / SDB
-
BAND
MENU / SET
VIRTUAL SPEAKER
9
+
6
7
VOLUME
STATUS
3
FUNCTION
ON / STANDBY
MUTING
SETUP
PHONES
TONE /SDB
1
ENTER
SURROUND
PARAMETER
CH SELECT
1
DISPLAY
RETURN
MENU
VCR CH
+
TOP MENU
STATUS
ANGLE
3
TONE /SDB
1
2
ENTER
RETURN
DISPLAY
VCR CH
MENU
+
TOP MENU
Press the TONE/SDB button.
• The tone switches as follows each time the TONE/SDB
button is pressed.
TONE /SDB
TONE / SDB
Main unit
DEFEAT
2
1
SURROUND
PARAMETER
CH SELECT
1
AUDIO
SUB TITLE
MUTING
SETUP
Remote control unit
SDB
(ON/OFF)
BASS
TREBLE
Use this to turn off the audio output temporarily.
Press the MUTING button.
Cancelling MUTING mode.
Press the MUTING button again.
MUTING
Remote control unit
NOTES:
• The mute mode is canceled when the main unit’s main volume
control or one of the main volume control buttons on the remote
control unit is operated.
• The setting is canceled if the set’s power is turned off.
With the name of the volume to be adjusted selected, turn
the SURROUND/SELECT knob or cursor button ( 0, 1 ) to
adjust the level.
SURROUND / SELECT
PUSH - PARAM.
Main unit
Remote control unit
DEFEAT
• The signals do not pass through the SDB, bass and treble
adjustment circuits, providing higher quality sound.
SDB
• Either turn the FUNCTION / SELECT dial or use the ( 0,
1 ) cursor buttons to select “ON” or “OFF”.
BASS, TREBLE
• To increase the bass or treble: Turn the control clockwise or
press the cursor button. (The bass or treble sound can be
increased to up to +10 dB in steps of 2 dB.)
• To decrease the bass or treble: Turn the control clockwise
or press the cursor button. (The bass or treble sound can be
decreased to up to –10 dB in steps of 2 dB.)
When TONE/SDB is displayed, the item can be switched
using the • and ª buttons on the remote control unit.
If no operation is performed within 4 seconds, the display
switches back to what was previously displayed.
Downloaded From Disc-Player.com Denon Manuals
45
ENGLISH
13 DOLBY / DTS SURROUND
Surround
This unit is equipped with a digital signal processing circuit that lets you play program sources in the surround mode to achieve the same sense
of presence as in a movie theater.
Dolby Surround
(1) Dolby Digital (Dolby Surround AC-3)
Dolby Digital is the multi-channel digital signal format developed by Dolby Laboratories.
Dolby Digital consists of up to “5.1” channels - front left, front right, center, surround left, surround right, and an additional channel exclusively
reserved for additional deep bass sound effects (the Low Frequency Effects – LFE – channel, also called the “.1” channel, containing bass
frequencies of up to 120 Hz).
Unlike the analog Dolby Pro Logic format, Dolby Digital’s main channels can all contain full range sound information, from the lowest bass, up
to the highest frequencies – 22 kHz. The signals within each channel are distinct from the others, allowing pinpoint sound imaging, and Dolby
Digital offers tremendous dynamic range from the most powerful sound effects to the quietest, softest sounds, free from noise and distortion.
2 Dolby Digital and Dolby Pro Logic
Dolby Digital
Dolby Pro Logic
No. recorded channels (elements)
5.1 ch
2 ch
No. playback channels
5.1 ch
4 ch
L, R, C, SL, SR, SW
L, R, C, S (SW - recommended)
Digital discrete processing Dolby Digital (AC-3) encoding/decoding
Analog matrix processing Dolby Surround
20 kHz
7 kHz
Comparison of home surround systems
Playback channels (max.)
Audio processing
High frequency playback limit of surround
channel
2 Dolby Digital compatible media and playback methods
Marks indicating Dolby Digital compatibility:
and
.
The following are general examples. Also refer to the player’s operating instructions.
Media
Dolby Digital output jacks
Playback method (reference page)
LD (VDP)
Coaxial Dolby Digital RF output jack
1
Set the input mode to “AUTO”.
(Page 43, 44)
DVD
Optical or coaxial digital output
(same as for PCM)
2
Set the input mode to “AUTO”.
(Page 43, 44)
Others
(satellite broadcasts, CATV, etc.)
Optical or coaxial digital output
(same as for PCM)
Set the input mode to “AUTO”.
(Page 43, 44)
1 Use a commercially available adapter to connect Dolby Digital RF (AC-3RF) output signals to the digital input terminals. (Refer to the
adapter’s operating instructions.)
Please refer to the instruction manual of the adapter when making connection.
2 To play in Dolby Digital Surround on the ADV-M71, set “DVD SUTUP” – “AUDIO SETUP” – “DIGITAL OUT” to “Normal” in the setup.
(The factory default is “Normal”.)
(2) Dolby Pro Logic II
• Dolby Pro Logic II is a new multi-channel playback format developed by Dolby Laboratories using feedback logic steering technology and
offering improvements over conventional Dolby Pro Logic circuits.
• Dolby Pro Logic II can be used to decode not only sources recorded in Dolby Surround ( ) but also regular stereo sources into five channels
(front left, front right, center, surround left and surround right) to achieve surround sound.
• Whereas with conventional Dolby Pro Logic the surround channel playback frequency band was limited, Dolby Pro Logic II offers a wider
band range (20 Hz to 20 kHz or greater). In addition, the surround channels were monaural (the surround left and right channels were the
same) with previous Dolby Pro Logic, but Dolby Pro Logic II they are played as stereo signals.
• Various parameters can be set according to the type of source and the contents, so it is possible to achieve optimum decoding (see page 59).
Sources recorded in Dolby Surround
These are sources in which three or more channels of surround have been recorded as two channels of signals using Dolby Surround
encoding technology.
Dolby Surround is used for the sound tracks of movies recorded on DVDs, LDs and video cassettes to be played on stereo VCRs, as well
as for the stereo broadcast signals of FM radio, TV, satellite broadcasts and cable TV.
Decoding these signals with Dolby Pro Logic makes it possible to achieve multi-channel surround playback. The signals can also be played
on ordinary stereo equipment, in which case they provide normal stereo sound.
There are two types of DVD Dolby surround recording signals.
q 2-channel PCM stereo signals
w 2-channel Dolby Digital signals
Regardless of the signal being played, when the 2-channel decode mode is set to the “Pro Logic II” mode in the “AUTO DECODE” mode,
the surround mode is automatically set to “Dolby Pro Logic II”.
46 From Disc-Player.com Denon Manuals
Downloaded
ENGLISH
2
Sources recorded in Dolby Surround are indicated with the logo mark shown below.
Dolby Surround support mark:
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories.
DTS Digital Surround
Digital Theater Surround (also called simply DTS) is a multi-channel digital signal format developed by Digital Theater Systems.
DTS offers the same “5.1” playback channels as Dolby Digital (front left, front right and center, surround left and surround right) as well as the
stereo 2-channel mode. The signals for the different channels are fully independent, eliminating the risk of deterioration of sound quality due to
interference between signals, crosstalk, etc.
DTS features a relatively higher bit rate as compared to Dolby Digital (1234 kbps for CDs and LDs, 1536 kbps for DVDs) so it operates with a
relatively low compression rate. Because of this the amount of data is great, and when DTS playback is used in movie theaters, a separate CDROM synchronized with the film is played.
With LDs and DVDs, there is of course no need for an extra disc; the pictures and sound can be recorded simultaneously on the same disc, so
the discs can be handled in the same way as discs with other formats.
Other media include CDs recorded in DTS. These are the same discs as conventional CDs (recorded in 2 channels) but include 5.1 channel
surround signals. They do not include images, but they do permit surround playback on the ADV-M71 and on CD players.DTS surround track
playback offers the same intricate, grand sound as in a movie theater, right in your own listening room.
2
DTS compatible media and playback methods
Marks indicating DTS compatibility:
and
.
The following are general examples. Also refer to the player’s operating instructions.
Media
DTS Digital output jacks
Playback method (reference page)
CD
Optical or coaxial digital output
(same as for PCM)
2
Set the input mode to “AUTO” or “DTS” (page 43, 44).
Never set the mode to “ANALOG” or “PCM”.
1
LD (VDP)
Optical or coaxial digital output
(same as for PCM)
2
Set the input mode to “AUTO” or “DTS” (page 43, 44).
Never set the mode to “ANALOG” or “PCM”.
1
DVD
Optical or coaxial digital output
(same as for PCM)
3
Set the input mode to “AUTO” or “DTS” (page 43, 44).
1 DTS signals are recorded in the same way on CDs and LDs as PCM signals. Because of this, the un-decoded DTS signals are output as
random “hissy” noise from the CD or LD player’s analog outputs. If this noise is played with the amplifier set at a very high volume, it
may possibly cause damage to the speakers. To avoid this, be sure to switch the input mode to “AUTO” or “DTS” before playing CDs or
LDs recorded in DTS. Also, never switch the input mode to “ANALOG” or “PCM” during playback. The same is true when playing CDs
and LDs recorded in DTS on the ADV-M71 or on LD/DVD compatible players. With DVDs, the DTS signals are recorded with a special
recording method so there is no problem. For DVDs, the DTS signals are recorded in a special way so this problem does not occur.
2 The signals provided at the digital outputs of a CD or LD player may undergo some sort of internal signal processing (output level
adjustment, sampling frequency conversion, etc.). In this case the DTS-encoded signals may be processed erroneously, in which case they
cannot be decoded by this unit, or may only produce noise. Before playing DTS signals for the first time, turn down the master volume to
a low level, start playing the DTS disc, then check whether the DTS indicator on this unit (see page 44) lights before turning up the master
volume.
3 To play in DTS Digital Surround on the ADV-M71, set “DVD SETUP” — “AUDIO SETUP” — “DIGITAL OUT” to “Normal” in the setup.
(The factory default is “Normal”.)
“DTS” and “DTS Digital Surround” are registered trademarks of Digital Theater Systems, Inc.
Downloaded From Disc-Player.com Denon Manuals
47
ENGLISH
Dolby Virtual Speaker
Dolby Virtual Speaker technology uses proprietary technology of Dolby Laboratories to create a virtual surround sound field using only two
speakers for the front channels, allowing the user to experience sound as if surround speakers were actually being used.
2
Features of Dolby Virtual Speaker sound
B Accurate surround sound field positioning
The virtual surround speakers are positioned at 105° to the left and 105° to the right.
B Multi-channel programs played according to the producer’s intentions
The sound of the different channels is played in the position set upon mixing. For example, sound set at the rear left is heard from the rear
left.
B Stereo programs played in surround
The Dolby Pro Logic II circuit is used together with the Dolby Virtual Speaker circuitry to create a rich virtual surround sound field with stereo
programs as well.
B Selecting the listening mode
Two listening modes are provided: Reference and Wide.
: 2 front channels
: Virtual sound field created with the Dolby
Virtual Speaker mode
Reference mode
Wide mode
With the ADV-M71, playback in the Dolby Virtual Speaker mode is possible with other speaker configurations as well.
• 3 speakers (2 front channels + center) : Reference/Wide modes
• 4 speakers (2 front channels + 2 surround channels) : Wide mode
• 5 speakers (2 front channels + center + 2 surround channels) : Wide mode
Dolby Headphone
Dolby Headphone is a 3D sound technology developed jointly by Dolby Laboratories and Lake Technology of Australia achieving surround sound
with regular headphones.
Normally when using headphones all the sounds are sounded in the head, making it uncomfortable to listen with headphones for long periods of
time. Dolby Headphone simulates speaker playback in a room and positions the sound sources to the front or the sides, outside of the head,
achieving a powerful sound similar to that of a movie theater or home theater. This technology is aimed mainly at multi-channel audio or video
equipment including Dolby Digital or Dolby Pro Logic Surround decoding functions and operates inside a high performance digital signal processing
chip (DSP).
The Dolby Headphone mode can be used not only with multi-channel sources but also with stereo programs.
48 From Disc-Player.com Denon Manuals
Downloaded
ENGLISH
14 SURROUND PLAYBACK
(1) Playing in the Dolby Virtual Speaker mode
• The Dolby Virtual Speaker mode is a mode using 3D sound technology from Dolby Laboratories to achieve multi-channel surround sound using
only two speakers for the front channels.
• With two speakers for the front channels, one of two modes can be selected: Reference or Wide.
• The Dolby Virtual Speaker mode can be used not only with Dolby Digital and DTS multi-channel sources but also with 2-channel sources. With
2-channel sources, one of two 2-channel modes can be selected: Virtual 1 (Dolby Pro Logic II Cinema) and Virtual 2 (Dolby Pro Logic).
• With a multi-channel speaker configuration (for example 5.1 channels), the Dolby Virtual Speaker mode provides different effects according to
the speaker configuration.
[1] Playing Dolby Digital and DTS surround sound (with digital
inputs only)
B Applicable sources
• Digital input (LINE-1 and D.AUX functions, including DVD
playback discs)
Dolby Digital multi-channel sources
DTS sources
3
SURROUND / SELECT
Main unit
PUSH - PARAM.
TONE / SDB
BAND
4
VOLUME
FUNCTION
ON / STANDBY
PHONES
1
8
9
DIRECT
STEREO
VIRTUAL
CALL
0/10
+10
-
TEST TONE
INPUT MODE
SURROUND
FUNCTION
2
CH
SYSTEM
3
CDR TAPE
1
2
6
5
9
-
7
STATUS
3
MUTING
SETUP
When the function is set to DVD, this is displayed on the
screen as well.
SURROUND
PARAMETER
-
VCR CH
SURROUND / SELECT
6
5
ENTER
+
PUSH - PARAM.
Select the digital input function (DVD or LINE-1 or D.AUX
digital input).
FUNCTION
Main unit
2
Display the surround parameters for that source.
TONE /SDB
CH SELECT
1
Lit
+
DVD
8
Lit
This switches automatically according to the format of the
playback source.
IN/SURR.
MD
or
• The DTS indicator lights when
playing DTS sources.
1
TUNER TV / VCR
DVD
IN/SURR.
A/V
Play a program source including the
mark.
• The Dolby Digital indicator lights
when playing Dolby Digital
sources.
+
7
Lit
+
MENU / SET
VIRTUAL SPEAKER
Remote control unit
• In the Dolby Virtual Speaker
mode, this indicator lights.
SURROUND / SELECT
DVD SURROUND RECEIVER ADV-M71
SURROUND
PUSH - PARAM.
3,5,6
B
Set the surround mode to “DOLBY VIRTUAL SPEAKER”.
Main unit
SURROUND
PARAMETER
Remote control unit
FUNCTION
Remote control unit
Set the input mode to “AUTO”.
DTS sources can also be played with
the input mode set to “DTS”.
INPUT MODE
Remote control unit
Downloaded From Disc-Player.com Denon Manuals
49
ENGLISH
6
Select and set the surround
parameters.
(On the remote control unit, use the
0 , 1 cursor buttons to set the
parameters.)
Surround parameters (1)
SURROUND / SELECT
PUSH - PARAM.
If nothing is done for 6 seconds
from when the parameter is
displayed, the normal display
reappears.
B
Main unit
D.COMP. (Dynamic range compression)
• This parameter adjusts the dynamic range of the Dolby
Digital sound. When listening with the volume turned
relatively low, at night for example, set this to the “HI” side
to lower the peak of the sound and amplify the quieter
sounds, narrowing the dynamic range and making the sound
easier to listen to. Set to “OFF” to turn this function off.
Setting the DOLBY VS mode
VS REF WIDE
The selected mode flashes.
The mode is not displayed if it cannot be selected.
B
D.COMP. setting
OFF
LOW
,
MID
/
HI
Setting the LFE level
LFE
-10
...
0dB
...
-5
, /
0
The LFE level can be adjusted in steps of 1 dB between 10 dB and 0 dB.
B
OFF
Wide
D.COMP. OFF
B
DOLBY VS (Dolby Virtual Speaker mode)
• REF (Reference mode)
This is the standard mode.
• WIDE (Wide mode)
This mode expands the front channel sound field.
DEFAULT setting
DEFAULT
YES
,
Y/N
NO
/
When “YES” is selected, the settings are restored to the
factory defaults.
When the surround parameters are displayed, use the • and ª
cursor buttons on the remote control unit to switch to previous or
following items.
Once the surround parameters have been set, stop operating the
buttons. After several seconds, the normal display reappears and
the settings are automatically entered.
50 From Disc-Player.com Denon Manuals
Downloaded
LOW
MID
Dynamic range
HI
Narrow
LFE (Low Frequency Effect):
• Program source and adjustment range
1. Dolby Digital :
–10 dB to 0 dB
2. DTS Surround :
–10 dB to 0 dB
• When Dolby Digital encoded software is played, it is
recommended that the LFE LEVEL be set to 0 dB for correct
Dolby Digital playback.
• When DTS encoded movie software is played, it is
recommended that the LFE LEVEL be set to 0 dB for correct
DTS playback.
• When DTS encoded music software is played, it is
recommended that the LFE LEVEL be set to –10 dB for
correct DTS playback.
ENGLISH
[2] 2-channel mode settings
• When 2-channel signals are input, one of two playback modes can be selected and set according to the 2-channel mode setting, Virtual 1 or
Virtual 2. (The Virtual 1 mode is set by factory default.)
Virtual 1 : 2-channel sources are played in virtual surround using Dolby Pro Logic II Cinema processing.
Virtual 1 : 2-channel sources are played in virtual surround using Dolby Pro Logic processing.
1,2,3
B
1
SURROUND / SELECT
DVD SURROUND RECEIVER ADV-M71
PUSH - PARAM.
-
+
BAND
MENU / SET
VIRTUAL SPEAKER
TONE / SDB
Set the surround mode to “DOLBY VIRTUAL SPEAKER”
(“DOLBY VS”).
• The normal display reappears after the surround mode is
displayed.
VOLUME
FUNCTION
SURROUND / SELECT
SURROUND
PUSH - PARAM.
ON / STANDBY
PHONES
Main unit
TEST TONE
INPUT MODE
SURROUND
A/V
SYSTEM
1
IN/SURR.
MD
CDR TAPE
1
2
+
DVD
8
Remote control unit
FUNCTION
TUNER TV / VCR
DVD
IN/SURR.
2
Press the SURROUND PARAMETER
button and select the 2-channel
mode.
SURROUND / SELECT
PUSH - PARAM.
9
6
-
7
2
STATUS
3
VIRTUAL
1
MUTING
SETUP
TONE /SDB
ENTER
SURROUND
PARAMETER
CH SELECT
RETURN
DISPLAY
ANGLE
MENU
AUDIO
VCR CH
+
Main unit
3
2
This can be selected if there is no
digital input signal, if the digital
input is a PCM or Dolby Digital 2channel signal and if the input is
analog.
TOP MENU
SUB TITLE
RC-936
NOTES:
• The 2-channel mode cannot be set when Dolby Digital or DTS
5.1-channel signals.
• The 2-channel mode is set and stored in the memory individually
for the different functions.
SURROUND
PARAMETER
Remote control unit
3
Turn the SURROUND/SELECT control on the main unit or use
the 0 and 1 cursor buttons on the remote control unit to
select the desired 2-channel mode.
SURROUND / SELECT
PUSH - PARAM.
Main unit
VIRTUAL 1
Remote control unit
VIRTUAL 2
Once the surround parameters have been set, stop operating the
buttons. After several seconds, the normal display reappears and
the settings are automatically entered
Downloaded From Disc-Player.com Denon Manuals
51
ENGLISH
Surround parameters (2)
1. VIRTUAL1 (Virtual 1 mode)
In this mode, 2-channel sources are played with Dolby Pro Logic
II Cinema processing. This mode is suited for playing movie
sources recorded in Dolby Surround and regular stereo sources.
2. VIRTUAL2 (Virtual 2 mode)
In this mode, 2-channel sources are played with Dolby Pro Logic
processing. This mode is compatible with regular Dolby Pro
Logic playback. With it, the recorded playback image of sources
recorded in Dolby Surround is recreated faithfully.
NOTE:
• If noise is generated for interactive and other high bit rate
sources when playing DVDs or D.AUX digital input signals in the
Dolby Virtual Speaker mode, set “LINE-1/LINE-2 REC OUT”
under “[5] Function settings” at “SYSTEM SETUP” on pages 37
and 38 to “Off”.
(When this is done, analog recording in the Dolby Virtual Speaker
mode is not possible.)
(2) Playing in the DENON original surround modes
• This unit is equipped with a high performance DSP (Digital Signal Processor) which uses digital signal processing to synthetically recreate the
sound field. One of 6 preset surround modes can be selected according to the program source and the parameters can be adjusted according
to the conditions in the listening room to achieve a more realistic, powerful sound. These surround modes can also be used for program sources
not recorded in Dolby Surround Pro Logic or Dolby Digital.
*1
MONO MOVIE
(NOTE 1)
Select this when watching monaural movies for a greater sense of expansion.
*2
ROCK ARENA
Use this mode to achieve the feeling of a live concert in an arena with reflected sounds coming from all directions.
*3
JAZZ CLUB
This mode creates the sound field of a live house with a low ceiling and hard walls. This mode gives jazz a very
vivid realism.
*4
VIDEO GAME
Use this to enjoy video game sources.
*5
MATRIX
Select this to emphasize the sense of expansion for music sources recorded in stereo. Signals consisting of the
difference component of the input signals (the component that provides the sense of expansion) processed for
delay are output from the surround channel.
5CH STEREO
In this mode, the signals of the front left channel are output from the left surround channel, the signals of the front
right channel are output from the right surround channel, and the same (in-phase) component of the left and right
channels is output from the center channel. This mode provides all speaker surround sound, but without directional
steering effects, and works with any stereo program source.
*6
Surround modes indicated “*” can be selected when the speaker setting is set to 5.1 channels.
Depending on the source being played, the effect may not be very strong.
In such cases, try other surround modes without paying too much attention to their names and choose the one you feel is best.
NOTE 1: When playing sources recorded in monaural, the sound is one-sided if only one channel (left or right) is input, so input signals to both
channels.
Personal Memory Plus
This set is equipped with a personal memorize function that automatically memorizes the surround modes and input modes selected for the
input different sources. When the input source is switched, the modes set for that source last time it was used are automatically recalled.
• Settings automatically stored in the memory for the individual input functions using the Personal Memory Plus function:
q Surround mode (including 2-channel decode mode and Dolby Pro Logic II mode settings)
w Input mode selection function
The surround parameters, TONE/SDB control settings and playback level balance for the different output channels are memorized for each
surround mode.
52 From Disc-Player.com Denon Manuals
Downloaded
ENGLISH
[1] DSP Surround simulation
2,4,5
B
4
SURROUND / SELECT
DVD SURROUND RECEIVER ADV-M71
PUSH - PARAM.
-
+
BAND
MENU / SET
VIRTUAL SPEAKER
TONE / SDB
VOLUME
FUNCTION
ON / STANDBY
PHONES
1
5
6
-
5CH STEREO
AUTO DECODE
TUNER
+
4
7
8
9
DIRECT
STEREO
VIRTUAL
CALL
0/10
+10
-
TEST TONE
INPUT MODE
SURROUND
FUNCTION
SYSTEM
 MONO MOVIE 


 ROCK ARENA 

 JAZZ CLUB


 VIDEO GAME 
 MATRIX 
ROOM SIZE
DELAY
EFFECT
DEFAULT
SURROUND
PARAMETER
Remote control unit
CH
1
2
TUNER TV / VCR
DVD
IN/SURR.
A/V
To enter the surround parameter
setting mode, press the SURROUND
mode.
• The surround parameter switches
in the following order each time the
SURROUND button is pressed for
the different surround modes.
DEFAULT
IN/SURR.
MD
CDR TAPE
1
2
There is no 5-channel stereo mode.
+
DVD
8
9
6
-
7
5
STATUS
3
MUTING
SETUP
TONE /SDB
ENTER
SURROUND
PARAMETER
CH SELECT
RETURN
DISPLAY
ANGLE
VCR CH
MENU
AUDIO
+
Display the parameter you want to adjust.
• Use the cursor buttons (•, ª) to select the surround
parameter.
5
4
SURROUND / SELECT
PUSH - PARAM.
TOP MENU
SUB TITLE
Main unit
RC-936
Remote control unit
• ROOM SIZE setting
1
R.SIZE
Select the input source.
FUNCTION
FUNCTION
MED
SMALL MED-S MED MED-L LARGE
,
/
• EFFECT LEVEL setting
Main unit
2
Remote control unit
EFECT
10
Select the surround mode for the input channel.
1
SURROUND / SELECT
10
,
15
/
SURROUND
PUSH - PARAM.
• DELAY TIME setting
DELAY
Main unit
• The surround mode switches in the following order each
time the SURROUND MODE button is pressed:
DOLBY VS
STEREO
DIRECT
*5CH STEREO
*MONO MOVIE
JAZZ CLUB
DOLBY VS
30ms
Remote control unit
VIDEO GAME
0ms
30ms
110ms
,
/
*AUTO DECODE
ROCK ARENA
*MATRIX
• The modes marked “*” can be selected when “5.1channel surround” is selected in the quick system setup.
3
Play a program source.
• Refer to instruction manual for handling.
Downloaded From Disc-Player.com Denon Manuals
53
ENGLISH
5
• DEFAULT setting
Surround parameters (3)
DEFAULT
Y/N
Y/N
YES
,
NO
/
When “YES” is selected, the settings are reset to their
factory default values.
Stop operating buttons once the surround parameter settings have
been completed. After several seconds the normal display
reappears and the settings are automatically set.
54 From Disc-Player.com Denon Manuals
Downloaded
ROOM SIZE:
• This sets the size of the sound field.
There are five settings: “SMALL”, “MED-S” (mediumsmall), “MED”, “MED-L” (medium-large) and “LARGE”.
“SMALL” recreates a small sound field, “LARGE” a large
sound field.
EFFECT LEVEL:
• This sets the strength of the surround effect.
The level can be set in 15 steps from 1 to 15. Lower the
level if the sound seems distorted.
DELAY TIME:
• In the MATRIX mode only, the delay time can be set within
the range of 0 to 110 ms.
ENGLISH
2 Table of Surround Mode Parameters (1)
Presence/absence of signals and controllability in the various modes
Surround Mode
DVS: Dolby Virtual Speaker
DHP: Dolby Headphone
Channel output
SUB-WOOFER
B
E
B
B
B
B
C (H/P ONLY)
E
E
E
DH2
C (H/P ONLY)
E
E
E
DH3
C (H/P ONLY)
E
E
E
BYPASS
C (H/P ONLY)
E
E
E
STEREO
C
E
E
B
DIRECT
DHP
DVS
SURROUND
L/R
FRONT
L/R
CENTER
REFERENCE
C
WIDE
C
DH1
E
E
B
C
B
B
B
DTS SURROUND
C
B
B
B
DOLBY PL II
C
B
B
B
AUTO STEREO
C
E
E
B
5CH STEREO
C
B
B
B
MONO MOVIE
C
B
B
B
ROCK ARENA
C
B
B
B
JAZZ CLUB
C
B
B
B
VIDEO GAME
C
B
B
B
MATRIX
C
B
B
B
AUTO
DECODE
C
DOLBY DIGITAL
2 Table of Surround Mode Parameters (2)
Presence/absence of signals and controllability in the various modes
Playback signals and surround modes for the various input functions
Surround Mode
DVS: Dolby Virtual Speaker
DHP: Dolby Headphone
(D.AUX / L2)
MD / LINE1
TAPE / LINE2 /
TUNER
When playing
PCM signals
When playing
analog signals
When playing
analog signals
DVD / D.AUX / MD / LINE1
When playing Dolby Digital
signals
When playing DTS signals
Multichannel
2-channel
Multichannel
2-channel
2-channel
2-channel
REFERENCE
4PL II
C
4PL II
C
4PL II
4PL II
4PL II
WIDE
4PL II
C
4PL II
C
4PL II
4PL II
4PL II
DH1
4PL II
C
4PL II
C
4PL II
4PL II
4PL II
DH2
4PL II
C
4PL II
C
4PL II
4PL II
4PL II
DH3
4PL II
C
4PL II
C
4PL II
4PL II
4PL II
C
C D.MIX
C
C D.MIX
C
C
C
STEREO
C
C D.MIX
C
C D.MIX
C
C
C
DIRECT
C
C D.MIX
C
C D.MIX
C
C
C
DOLBY DIGITAL
C
C
E
E
E
E
E
DTS SURROUND
E
E
E
C
E
E
E
4PL II
E
4PL II
E
4PL II
4PL II
4PL II
DHP
DVS
2-channel
AUTO
DECODE
BYPASS
DOLBY PL II
4
E
4
E
4
4
E
5CH STEREO
C
C
C
C
C
C
C
MONO MOVIE
C
C
C
C
C
C
C
ROCK ARENA
C
C
C
C
C
C
C
JAZZ CLUB
C
C
C
C
C
C
C
VIDEO GAME
C
C
C
C
C
C
C
MATRIX
C
C
C
C
C
C
C
AUTO STEREO
B:
Can be either present or absent, depending on speaker configuration setting.
: Only usable when center or surround speakers set to be used with the speaker configuration setting.
C : Signal present or controllable.
D.MIX: Compatible with down-mixing.
PL II: Compatible with PL II processing.
4 : Can be selected with 2-channel decode mode.
E : No signal or not controllable.
Downloaded From Disc-Player.com Denon Manuals
55
ENGLISH
2 Table of Surround Mode Parameters (3)
Presence/absence of signals and controllability in the various modes
Surround Mode
DVS: Dolby Virtual Speaker
DHP: Dolby Headphone
Surround parameter – default value indicated in (parentheses)
TONE
CONTROL
SDB
2ch
DECODE
MODE
Pro Logic II Music mode only
PANORAMA
DIMENSION
CENTER WIDTH
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
C (OFF)
C (OFF)
WIDE
C (OFF)
C (OFF)
DH1
C (OFF)
C (OFF)
DH2
C (OFF)
C (OFF)
DH3
C (OFF)
C (OFF)
BYPASS
C (OFF)
C (OFF)
E
E
E
E
STEREO
C (OFF)
C (OFF)
E
E
E
E
DIRECT
E
E
E
E
E
E
DOLBY DIGITAL
C (OFF)
C (OFF)
E
E
E
DTS SURROUND
C (OFF)
C (OFF)
E
E
E
DOLBY PL II
C (OFF)
C (OFF)
C (OFF)
C (3)
C (3)
AUTO STEREO
AUTO
DECODE
DHP
DVS
REFERENCE
C
(VIRTUAL1)
C *2
(CINEMA)
C *1
(AUTO
STEREO)
C (OFF)
C (OFF)
E
E
E
5CH STEREO
C (OFF)
C (OFF)
E
E
E
E
MONO MOVIE
C (OFF)
C (OFF)
E
E
E
E
ROCK ARENA
C (OFF)
C (OFF)
E
E
E
E
JAZZ CLUB
C (OFF)
C (OFF)
E
E
E
E
VIDEO GAME
C (OFF)
C (OFF)
E
E
E
E
MATRIX
C (OFF)
C (OFF)
E
E
E
E
2 Table of Surround Mode Parameters (4)
Presence/absence of signals and controllability in the various modes
Surround Mode
DVS: Dolby Virtual Speaker
DHP: Dolby Headphone
Surround parameter – default value indicated in (parentheses)
Dolby Digital/DTS signal
EFFECT
LEVEL
DELAY
TIME
D. COMP.
LFE
REFERENCE
E
E
E
C (OFF)
C (0dB)
WIDE
E
E
E
C (OFF)
C (0dB)
DH1
E
E
E
C (OFF)
C (0dB)
DH2
E
E
E
C (OFF)
C (0dB)
DH3
E
E
E
C (OFF)
C (0dB)
BYPASS
E
E
E
C (OFF)
C (0dB)
STEREO
E
E
E
C (OFF)
C (0dB)
DIRECT
E
E
E
C (OFF)
C (0dB)
DOLBY DIGITAL
E
E
E
C (OFF)
C (0dB)
DTS SURROUND
E
E
E
C (OFF)
C (0dB)
DOLBY PL II
E
E
E
C (OFF)
C (0dB)
AUTO STEREO
E
E
E
E
E
E
E
E
C (OFF)
C (0dB)
AUTO
DECODE
DHP
DVS
ROOM
SIZE
5CH STEREO
MONO MOVIE
C (MEDIUM)
C (10)
E
C (OFF)
C (0dB)
ROCK ARENA
C (MEDIUM)
C (10))
E
C (OFF)
C (0dB)
JAZZ CLUB
C (MEDIUM)
C (10)
E
C (OFF)
C (0dB)
VIDEO GAME
C (MEDIUM)
C (10)
E
C (OFF)
C (0dB)
E
E
C (30ms)
C (OFF)
C (0dB)
MATRIX
: Only usable when center or surround speakers set to be used with the speaker configuration setting.
C : Signal present or controllable.
E : No signal or not controllable.
*1 : Auto Stereo mode or Dolby PL II mode (Cinema, Music or Dolby PL mode) selectable.
*2 : Dolby PL II mode (Cinema, Music or Music 2 mode) selectable.
D.MIX: Compatible with down-mixing.
( ): Parameter’s default value
56 From Disc-Player.com Denon Manuals
Downloaded
ENGLISH
(3) Playback using the Dolby Headphone mode
• The ADV-M71 is equipped with the Dolby Headphone mode, a technology developed jointly by Dolby Laboratories and Lake Technology for
achieving 3D sound over regular headphones.
• The Dolby Headphone mode is set when headphones are connected to the ADV-M71’s headphones jack.
• There are actually four Dolby Headphone modes creating different sound field effects: DH1, DH2, DH3 and Bypass (normal stereo playback).
• The Dolby Headphone mode is compatible with Dolby Digital and DTS multi-channel sources. With 2-channel sources, playback in the Cinema,
Music 1 and Music 2 modes can be selected with the 2-channel mode setting.
3
2,3
B
Set the various surround parameters.
If nothing is done for 6 seconds from when the parameter
is displayed, the normal display reappears.
SURROUND / SELECT
DVD SURROUND RECEIVER ADV-M71
PUSH - PARAM.
-
+
SURROUND / SELECT
BAND
MENU / SET
VIRTUAL SPEAKER
PUSH - PARAM.
TONE / SDB
VOLUME
FUNCTION
ON / STANDBY
PHONES
Main unit
1
• Dolby H mode setting
H
TEST TONE
INPUT MODE
SURROUND
Remote control unit
DH1
FUNCTION
TUNER TV / VCR
DVD
IN/SURR.
A/V
SYSTEM
DH1
IN/SURR.
MD
CDR TAPE
1
2
8
DH2
,
+
DVD
DH3
/
BYPASS
9
6
-
7
• 2-channel mode setting
STATUS
3
MUTING
SETUP
2
TONE /SDB
ENTER
SURROUND
PARAMETER
CH SELECT
RETURN
DISPLAY
ANGLE
MENU
AUDIO
VCR CH
+
3
2
CINEMA
• The mode switches as shown below each time a button is
operated.
TOP MENU
SUB TITLE
CINEMA
MUSIC2
RC-936
1
Connect headphones (sold separately) to the headphones
jack.
• When headphones are plugged in, the output to the
speakers is automatically turned off and no sound is
produced from the speakers.
Can be selected when there is no signal or when playing a
2-channel source.
There are also the same parameters as those described under
“(2) Playing in the Dolby Virtual Speaker mode”, namely:
B D.COMP. setting
B LFE level setting
B DEFAULT setting
When the surround parameters are displayed, use the • and ª
cursor buttons on the remote control unit to switch to previous or
following items.
PHONES
2
MUSIC1
Press the surround parameter button and display the
surround parameters.
When the function is set to DVD, this is also shown on the
display.
SURROUND / SELECT
PUSH - PARAM.
Main unit
Downloaded From Disc-Player.com Denon Manuals
SURROUND
PARAMETER
Remote control unit
57
ENGLISH
2 Recording
Surround parameters (4)
DOLBY H (Dolby Headphone modes)
DH1 ..............Reference room
(small room with little reverberation)
DH2 ..............Live room
(room with more reverberation than DH1)
DH3 ..............Large room
(Larger room than DH1. Use this mode to achieve a
sense of distance and diffusion of the sound.)
BYPASS ........Stereo playback.
2-channel modes
These can be selected when playing 2-channel sources (analog,
PCM, etc.). The signals are processed by one of the following
decoders to achieve multiple channels then played in the Dolby
Headphone mode.
In the Bypass mode, these are not displayed.
CINEMA .......Dolby Pro Logic II Cinema mode
MUSIC1 ........Dolby Pro Logic II Music mode
MUSIC2 ........Signals played in the Dolby Headphone mode with 2
channels.
When playing digital input sources, including function DVDs, signals
encoded in the Dolby Headphone mode are output from the recording
output terminals and can be recorded on other recording devices.
q Connect headphones to the headphones jack.
w Signals encoded in the Dolby Headphone mode are output from
the recording output terminals (in analog).
e Select the parameters, set the desired mode and start recording.
NOTES:
• Dolby Headphone processing makes the analog recording output
level lower than the normal stereo recording output level.
• Do not change the parameters or unplug the headphones during
recording. Doing so will cause interruptions in the recorded sound.
• Dolby Headphone signals cannot be recorded during playback of
analog sources. The analog input signals are output as such from
the recording output terminals.
(4) Playing in the Auto Decode Mode (only with multi-channel speaker settings)
• The auto decode mode can be selected when the ADV-M71 is used in combination with a subwoofer with built-in amplifier and power amplifier,
center or surround speaker system and a multi-channel speaker configuration (5.1 channels, etc.) is set.
• To make the 5.1-channel setting, set the speakers to “5.1CH SURROUND” in the quick system setup and select “Room Setting” and “Listening
Position”. (See pages 31 to 32.)
• In the auto decode mode, multi-channel playback of multi-channel sources (Dolby Digital or DTS) can be performed automatically according to
the format of the input signals.
• For 2-channel sources as well, playback is possible in the Auto Stereo, Dolby Pro Logic II Cinema, Dolby Pro Logic II Music or Dolby Pro Logic
mode, as set by the 2-channel mode setting. (Two channels of stereo signals are played in the Auto Stereo mode. In other modes playback is
multi-channel.)
[1] Dolby Digital and DTS surround playback (for digital inputs only)
• The applicable sources and procedures are the same as those described at “[1] Playing Dolby Digital and DTS surround sound” under “(1)
Playing in the Dolby Virtual Speaker mode”.
• At step 3, set the surround mode to “AUTO DECODE”. The sound is played according to the format of the input signals.
• At step 6 there are no Dolby Virtual Speaker mode surround parameters.
[2] 2-channel mode setting
• With the auto decode mode, one of four multi-channel playback modes, namely stereo 2-channel playback in the Auto Stereo mode (factory
default), Dolby Pro Logic II Cinema, Dolby Pro Logic II Music and Dolby Pro Logic, can be selected and set for 2-channel sources.
“Auto Stereo” mode cannot be selected for with functions only analog inputs (TUNER, LINE-2, etc.). To play such signals in stereo, set the
surround mode to “STEREO”. (See page 44.)
• Operations are the same as those described at “[2] 2-channel mode settings” under “(1) Playing in the Dolby Virtual Speaker mode” on page
51.
• At step 1, set the surround mode to “AUTO DECODE”.
• The 2-channel modes selectable at step 3 are as follows:
AUTO ST
PLII CINEMA
PRO LOGIC
PLII MUSIC
Auto Stereo can be selected when the function is set to DVD, LINE-1 or D.AUX.
• For the 2-channel mode surround parameters in the auto decode mode, refer to “Surround parameters (5)” (auto decode 2-channel mode).
58 From Disc-Player.com Denon Manuals
Downloaded
ENGLISH
Surround parameters (5) (2-channel mode)
AUTO-ST (auto stereo) mode
2-channel sources are played in 2-channel stereo.
When this mode is selected in the auto decode mode, multi-channel sources (DVD, BS digital, etc.) are played in the multi-channel mode,
while 2-channel sources (CDs, etc.) are automatically played in stereo.
PLII CINEMA / PLII MUSIC / PRO LOGIC mode
Even 2-channel sources undergo Dolby Pro Logic II processing and are played in the multi-channel mode.
Dolby Digital Pro-Logic II processing is applied to 2-channel sources as well to play them in the multi-channel mode.
When this mode is selected in the auto decode mode, multi-channel sources (DVD, BS digital, etc.) are played in the multi-channel mode,
and 2-channel sources (CDs, etc.) are also automatically processed with Dolby Digital Pro-Logic II and played in the multi-channel mode.
• PLII CINEMA (Dolby Pro Logic II CINEMA) mode
This mode is suited for playing movies recorded in Dolby Surround as well as regular sources recorded in stereo. A high precision decoder
decodes the signals into 5 channels, resulting in uniform 360 degree surround sound even with 2-channel sources.
The MUSIC mode may be more effective for sources containing a high ratio of stereo music. Try both and choose the most effective
mode.
• PLII MUSIC (Dolby Pro Logic II MUSIC) mode
This mode is suited for surround playback of stereo music signals. The inverted phase signals (the reverberation component of the music
signals contains a high ratio of these) are played from the surround channel, and at the same time the frequency response of the surround
channel is optimized to achieve a natural sound with a sense of expansion.
With music signals, the sound field expansion differs greatly according to the type of music, the recording conditions (live, etc.) and the
contents of the signal source. Because of this, the MUSIC mode includes optional parameters for further adjusting the sound field.
• PANORAMA
The front stereo sound field image is extended to the surround channel.
This is effective if under normal conditions the stereo image is narrow and the surround effect seems weak.
• DIMENSION
This shifts the center of the sound field image to the front or surround side.
The playback balance of the different channels can be adjusted regardless of the amount of reverberation component in the source. If
the sound field image is biased towards the front or surround side, this optional parameter can be used to correct it.
• CENTER WIDTH
This adjusts the method of playback of the center signal component from the center channel only to the front channel only.
When the center channel is played in a way prioritizing separation, the position of the front channel sound field is clearer but the overall
sound field image concentrates at the center and the relationship between the different channels seems weaker. This parameter can
be adjusted to improve the sense of stability of the sound field image and achieve natural horizontal expansion.
• PRO LOGIC (Dolby Pro Logic) mode
This is the conventional Dolby Pro Logic compatible mode. In this mode sources recorded in Dolby Surround are decoded with a
playback image faithful to the original recording.
• In the auto decode mode, the play mode switches automatically as shown below according to the content of the disc being played or program
being received. (When the input mode is set to “AUTO” and the 2-channel mode is set to “AUTO ST”)
Source
DVD
CD
(
Content
Play mode
5.1/6.1-channel Dolby Digital
5.1-channel playback
2-channel Dolby Digital
(including 2-channel Dolby Surround)
Stereo playback (
5.1/6.1-channel DTS digital
5.1-channel playback
PCM stereo
Stereo playback (
)
)
) To play 2-channel surround (Dolby Surround) or stereo sources in the 5.1-channel
surround mode, set the 2-channel mode to something other than “AUTO ST”.
Downloaded From Disc-Player.com Denon Manuals
59
ENGLISH
[3] Setting the parameters in the PLII Cinema, PLII Music and Pro Logic modes
• When PLII Cinema, PLII Music or Pro Logic is selected for the 2-channel mode, detailed parameters can be set for each of these modes.
PLII Music mode: Make the settings using the procedure below.
• Program sources including the
mark and CDs and other 2-channel sources are decoded with Dolby Pro Logic II
processing and played in the multi-channel mode.
q PLII Cinema mode: This mode is suited for movies and other Dolby Surround programs.
w PLII Music mode: This mode is suited for stereo music programs.
e Pro Logic compatible mode: This is the original Dolby Surround Pro Logic mode.
PROG/DIRECT
REPEAT
CD SRS
SEARCH MODE
RANDOM
MODE
MEMO
BAND
DVD
TUNER
D.AUX
1
2
3
MD/LINE-1
TAPE /LINE-2
5
6
+
-
5CH STEREO
AUTO DECODE
TUNER
9
+
4
3
TUNING /
TV VOL
7
8
DIRECT
STEREO
VIRTUAL
CALL
0/10
+10
-
TEST TONE
INPUT MODE
SURROUND
FUNCTION
Set the various surround parameters.
SURROUND / SELECT
PUSH - PARAM.
CH
TUNER TV / VCR
DVD
IN/SURR.
A/V
SYSTEM
IN/SURR.
MD
CDR TAPE
1
2
Main unit
+
DVD
8
6
-
7
STATUS
3
PANORA
MUTING
SETUP
Remote control unit
• Panorama setting
9
ON
OFF
TONE /SDB
ENTER
SURROUND
PARAMETER
CH SELECT
DISPLAY
RETURN
ANGLE
VCR CH
MENU
+
3
2
ON
,
/
TOP MENU
SUB TITLE
AUDIO
OFF
The selected setting flashes.
• Dimension setting
RC-936
DIMENSION
1
2
Select “PLII C”, “PLII M” or “PRO LOGIC” for the 2-channel
mode setting.
...
0
Set the surround parameters for the selected mode.
• The parameters switch as shown below each time one of
the buttons is pressed.
...
3
,
3
6
/
• Center Width setting
CNTR WIDTH
3
SURROUND / SELECT
SURROUND
PARAMETER
PUSH - PARAM.
...
0
,
Main unit
Remote control unit
PL MUSIC
PRO LOGIC
DEFAULT
PANORAMA
DEFAULT
7
/
• Default setting
DEFAULT
PL CINEMA
...
3
YES
,
Y/N
Y/N
/
NO
DIMENSION
CNTR WIDTH
When “YES” is selected, the settings are restored to the
factory defaults.
DEFAULT
Once the surround parameters have been set, stop operating the
buttons. After several seconds, the normal display reappears and
the settings are automatically entered.
This completes the setting of the parameters.
NOTES:
• The 2-channel mode is set and stored in the memory individually
for the different functions.
60 From Disc-Player.com Denon Manuals
Downloaded
ENGLISH
[4] Playing in the Dolby Pro Logic II mode (all functions)
• The source is played according to the settings that have been made for the 2-channel mode and the parameters in the PLII Cinema, PLII Music
and Pro Logic modes.
• Applicable sources
• Digital input signals (LINE-1 and D.AUX functions, including DVD
playback discs)
Dolby Digital 2-channel sources
PCM 2-channel sources
• 2-channel analog input signals (TUNER, LINE-1 and LINE-2)
1
Select the input function.
FUNCTION
FUNCTION
2
B
Main unit
Remote control unit
SURROUND / SELECT
DVD SURROUND RECEIVER ADV-M71
PUSH - PARAM.
TONE / SDB
In the “DTS” input mode with the function set to a digital
input (DVD, LINE-1 or D.AUX), it is not possible to play in
the Dolby Pro Logic II mode.
+
BAND
MENU / SET
VIRTUAL SPEAKER
VOLUME
FUNCTION
ON / STANDBY
PHONES
2
Set the surround mode to “AUTO DECODE”.
1
SURROUND / SELECT
PUSH - PARAM.
OFF
ON
VCR
REC
NTSC/PAL
SLEEP
TITLE
SOURCE
ENTER
A-B REPEAT
CLEAR
SURROUND
TIME
TV IN
T V
CHARAC.
SLIDE MODE
EDIT/MENU
ZOOM
TV CH
-
PROG/DIRECT
REPEAT
RANDOM
MODE
MEMO
BAND
DVD
TUNER
TV CH
+
CD SRS
SEARCH MODE
D.AUX
1
2
MD/LINE-1
TAPE /LINE-2
4
5
6
+
-
5CH STEREO
AUTO DECODE
TUNER
+
3
7
8
9
DIRECT
STEREO
VIRTUAL
3
CH
CALL
0/10
+10
-
TEST TONE
INPUT MODE
SURROUND
FUNCTION
TUNER TV / VCR
DVD
IN/SURR.
A/V
SYSTEM
Main unit
1
2
IN/SURR.
MD
CDR TAPE
1
2
9
6
Play a program source including the
mark or a 2-channel source.
• The source is played according to the Dolby Pro Logic II
mode settings.
• In the Cinema and Music modes, the Dolby Pro Logic II
indicator lights.
+
DVD
8
Remote control unit
TUNING /
TV VOL
Lit
PRO LOGIC II
-
7
STATUS
3
MUTING
SETUP
• In the Dolby Pro Logic mode, the Dolby Pro Logic indicator
lights
TONE /SDB
ENTER
SURROUND
PARAMETER
CH SELECT
DISPLAY
RETURN
ANGLE
VCR CH
MENU
AUDIO
+
TOP MENU
SUB TITLE
RC-936
Downloaded From Disc-Player.com Denon Manuals
PRO LOGIC
Lit
4
4
Set the surround parameters
according to the selected mode.
Refer to steps 1 to 3 under
“Setting the parameters in the
PLII Cinema, PLII Music and Pro
Logic modes” (page 60).
SURROUND
PARAMETER
Remote control unit
61
ENGLISH
15 LISTENING TO THE RADIO
(1) Tuning
3
OFF
ON
VCR
REC
NTSC/PAL
SLEEP
TITLE
SOURCE
ENTER
A-B REPEAT
CLEAR
T V
CHARAC.
SLIDE MODE
EDIT/MENU
ZOOM
TV CH
B
SURROUND / SELECT
DVD SURROUND RECEIVER ADV-M71
PUSH - PARAM.
-
+
BAND
MENU / SET
VIRTUAL SPEAKER
TONE / SDB
VOLUME
FUNCTION
ON / STANDBY
PHONES
Set the remote
control selector
switches to A/V
and TUNER.
TUNER TV / VCR
DVD
IN/SURR.
A/V
SYSTEM
1
2
IN/SURR.
MD
TIME
TV IN
-
PROG/DIRECT
REPEAT
RANDOM
MODE
MEMO
BAND
TV CH
TUNING /
TV VOL
DVD
TUNER
D.AUX
1
2
3
MD/LINE-1
TAPE /LINE-2
4
5
6
+
-
5CH STEREO
AUTO DECODE
TUNER
8
9
STEREO
VIRTUAL
CALL
0/10
+10
-
TEST TONE
INPUT MODE
SURROUND
FUNCTION
CH
TUNER TV / VCR
DVD
IN/SURR.
A/V
SYSTEM
IN/SURR.
MD
CDR TAPE
8
6
2
+
3
Press the FUNCTION button and select “TUNER”.
7
MUTING
NOTES:
A humming sound may be heard when using a TV nearby while
receiving AM programs. If this happens, move the system as far
from the TV as possible.
FUNCTION
Main unit
Remote control unit
Select “FM” or “AM”.
• The selected “FM AUTO”, “FM MONO” or “AM” is
displayed.
• When using the remote control, the mode button is used to
select FM AUTO and MONO.
BAND
RANDOM
PROG/DIRECT
BAND
MODE
Main unit
3
9
STATUS
Example: Tuning in FM/AM stations
2
1
CDR TAPE
1
FUNCTION
2
2
3
+
7
DIRECT
DVD
1
+
CD SRS
SEARCH MODE
Remote control unit
Adjust the receiving frequency.
• When a station is received, the “TUNED” indication will
light.
TUNING /
-
+
Main unit
62 From Disc-Player.com Denon Manuals
Downloaded
+
-
Remote control unit
Auto tuning
• When one of the Tuning +/– button is pressed, the frequency
changes in steps of 0.2 MHz in the FM band, 10 kHz in the AM
band.
• If one of the Tuning +/– button is held for over 1 second, the
frequency continues to change when the button is released
(auto tuning) and stops when a station is tuned in.Tuning will not
stop at stations whose reception is poor.
• To stop the auto tuning function, press the Tuning +/– button
once.
FM Stereo Reception
• When a program being broadcast in “FM AUTO” is received,
the “ST” indicator lights and the program is received in stereo.
• If reception is poor and there is much noise in the stereo signals,
press the BAND or MODE button to set the FM MONO mode.
About the tuning mode and the preset mode
• The function of the “–” and “+” buttons
- +
on the main unit can be switched so that
they can be used for either tuning
(selecting the reception frequency) or for
selecting preset stations.
Main unit
• The buttons are set to the tuning mode
BAND
upon shipment. The mode can be switched
to the preset mode by pressing the “+”
button while pressing in the BAND button.
(When this is done, “PRESET” is flashes for
Main unit
approximately 5 seconds.)
• Press the “–” button while pressing in the BAND button to
switch to the tuning mode. (When this is done, “TUNING” is
flashes for approximately 5 seconds.)
ENGLISH
(2) Presetting stations that have been tuned in and giving names to stations (remote control unit
only)
2 A total of 40 stations (including both FM and AM stations) can be preset.
2 Preset stations can be given names with up to 8 characters (letters, numbers and symbols).
2 Preset stations using the including remote control unit.
SLEEP
Set the remote
control selector
switches to A/V
and TUNER.
CLEAR
2,3,
4,6
TUNER TV / VCR
DVD
IN/SURR.
A/V
SYSTEM
IN/SURR.
MD
REC
NTSC/PAL
TITLE
TV IN
T V
ENTER
A-B REPEAT
CHARAC.
SLIDE MODE
EDIT/MENU
ZOOM
SOURCE
CDR TAPE
TV CH
TV CH
4
+
CD SRS
SEARCH MODE
PROG/DIRECT
REPEAT
RANDOM
MODE
MEMO
BAND
DVD
TUNER
D.AUX
1
2
3
MD/LINE-1
TAPE /LINE-2
4
5
6
+
-
5CH STEREO
AUTO DECODE
TUNER
TUNING /
TV VOL
8
9
STEREO
VIRTUAL
CALL
0/10
+10
-
TEST TONE
INPUT MODE
SURROUND
FUNCTION
Press the MEMO button twice in a row to enter the station
name you have input.
• The preset number indicator, “P”,
flashes.
REPEAT
MEMO
P0-
+
7
DIRECT
A/V
1
-
TIME
CH
FM-DENON
3,5
Remote control unit
5
TUNER TV / VCR
DVD
IN/SURR
Use the “+” and “–” preset buttons to
select the preset number.
TUNER
+
Tune in the station you want to preset.
CH
P03
P0-
FM
-
FM-DENON
92.50M
Remote control unit
2
The preset number can also be input directly using the +10
and 1 to 10 buttons on the numeric keypad.
Press the MEMO button twice in a row.
• The name input mode is set.
REPEAT
P0-
_
MEMO
Remote control unit
6
Press the MEMO button to enter the preset number.
• The preset number, band and reception frequency are
displayed, then the station name appears.
P03
FM
92.50M
REPEAT
\
3
MEMO
Use the “+” and “–” preset buttons to select the character,
then press the MEMO button to input that character.
P03
TUNER
+
FM-DENON
Remote control unit
CH
Remote control unit
• When the “+” TUNING button or the MEMO button is
pressed, the selected character is entered, the cursor
moves to the next position and the next character can be
input.
• Use the “–” TUNING button to move back to the previous
position. Use this to correct characters that have already
been input.
P0-
F
REPEAT
MEMO
\
P0-
F_
Remote control unit
To stop in the middle of the procedure,
press the MODE button before pressing
the MEMO button at step 4. Everything
you have input is cleared.
To clear a station name that has been set in
the memory, call out that station, set the
name input mode in step 2, then press the Remote control unit
MODE button. The station name is cleared
and the preset channel frequency is
displayed.
If you only want to preset a station, press the MEMO button once
while the station is tuned in. The preset number indicator, “P”,
flashes, and the preset number input mode is set. Use the “+” and
“–” preset buttons to select the preset number then press the
MEMO button again to store that station at the selected number.
(The number can also be specified directly using the +10 and 1 to
10 buttons on the numeric keypad.)
PROG/DIRECT
MODE
TUNER
+
REPEAT
CH
MEMO
Remote control unit
Downloaded From Disc-Player.com Denon Manuals
Remote control unit
63
ENGLISH
(3) Auto tuner presets
Use this to automatically search for FM broadcasts and store up to 40 stations at preset channels 1 to 40.
NOTE:
• If an FM station cannot be preset automatically due to poor reception, use the “Manual tuning” operation to tune in the station, then preset it
using the manual “Preset memory” operation.
1
2
Using the TUNER function, press and
hold the MENU/SET button of the main
unit for 2 seconds or longer.
• “AUTO PRESET?” and “–: NO/+:
START” will alternately appear on the
display of the main unit.
MENU/SET
B
PUSH - PARAM.
-
+
BAND
MENU / SET
VIRTUAL SPEAKER
TONE / SDB
Main unit
VOLUME
FUNCTION
ON / STANDBY
• Press the TUNING – button to cancel.
2
SURROUND / SELECT
DVD SURROUND RECEIVER ADV-M71
PHONES
Use the TUNING + button to select
“START”.
“SEARCH” flashes on the display and
searching begins.
“COMPLETED” appears once searching is
completed.
+
1
Main unit
(4) Listening to preset stations
Example: Listening to the station preset at number P03 (This operation is only possible from the remote control unit.)
1
B
1
SURROUND / SELECT
DVD SURROUND RECEIVER ADV-M71
PUSH - PARAM.
-
+
BAND
MENU / SET
VIRTUAL SPEAKER
TONE / SDB
VOLUME
Use the “+” and “–” preset buttons to select preset number
“3” or press the “3” button on the numeric keypad to display
preset number “P03”.
The “+” and “–” buttons on the main unit can be selected
when the preset mode has been set.
FUNCTION
ON / STANDBY
TUNER
PHONES
-
+
+
D.AUX
3
CH
OFF
SLEEP
Set the remote
control selector
switches to A/V
and TUNER.
SYSTEM
T V
ENTER
A-B REPEAT
CHARAC.
SLIDE MODE
REPEAT
RANDOM
MODE
MEMO
BAND
DVD
TUNER
D.AUX
1
2
3
TV CH
CDR TAPE
-
TV CH
+
5
6
AUTO DECODE
TUNER
7
8
9
DIRECT
STEREO
VIRTUAL
CALL
0/10
+10
-
TEST TONE
INPUT MODE
SURROUND
FUNCTION
4
The functions of the “+” and “–” buttons on the main unit change
according to whether the tuning or preset mode is set. When the
tuning mode is set, you can switch to the preset mode by pressing
the “+” button while pressing the BAND button.
TUNING /
TV VOL
5CH STEREO
MD/LINE-1
Remote control unit
EDIT/MENU
ZOOM
CD SRS
SEARCH MODE
+
-
IN/SURR.
MD
TIME
CLEAR
TUNER TV / VCR
DVD
IN/SURR.
A/V
TITLE
TV IN
PROG/DIRECT
1
Main unit
ON
VCR
REC
NTSC/PAL
SOURCE
TAPE /LINE-2
+
CH
1
BAND
+
TUNER TV / VCR
DVD
IN/SURR.
A/V
SYSTEM
IN/SURR.
MD
CDR TAPE
The preset buttons on the remote control unit (TUNER CH “+” and
“–”) can be used at any time.
64 From Disc-Player.com Denon Manuals
Downloaded
Main unit
Main unit
ENGLISH
16 ON-SCREEN DISPLAY
• The ADV-M71 is equipped with an on-screen display (“OSD”) function that displays various types of information on the surround functions and
the disc on the screen when the function is set to DVD.
q Setup screen
• This is used to select the speaker system being used (quick system setting) and to change the function of the ADV-M71 and various settings
when playing discs (system setting change and DVD setting change).
• The setup screen can be used regardless of the currently set function.
w Display of disc information
• When the function is set to DVD, the OSD displays information on the disc and appears when various playback functions are operated.
e Display of surround function
• When the function is set to DVD, information on the surround amplifier is also displayed and can be operated.
• The OSD for the surround function (AV OSD) can be turned on and off.
(The OSD for the setup screen and DVD disc information cannot be set to “OFF”.)
Set to “ON” upon shipment from the factory.
2 1
B
1
SURROUND / SELECT
DVD SURROUND RECEIVER ADV-M71
PUSH - PARAM.
-
+
BAND
MENU / SET
VIRTUAL SPEAKER
TONE / SDB
VOLUME
FUNCTION
ON / STANDBY
PHONES
With the function set to DVD, press the STATUS button of the
remote control for at least 2 seconds.
Press in the MENU/SET button on the main unit, then press
the MENU/SET button again for at least 2 seconds while
“STATUS” is displayed.
• “AV OSD ON 0:1 OFF” is displayed.
STATUS
MENU / SET
OFF
ON
VCR
REC
NTSC/PAL
SLEEP
TITLE
SOURCE
TIME
TV IN
T V
EDIT/MENU
ZOOM
CLEAR
ENTER
A-B REPEAT
CHARAC.
SLIDE MODE
PROG/DIRECT
REPEAT
RANDOM
TV CH
-
MODE
MEMO
BAND
DVD
TUNER
D.AUX
1
2
3
MD/LINE-1
TV CH
2
TUNING /
TV VOL
5
6
+
-
5CH STEREO
AUTO DECODE
TUNER
+
TAPE /LINE-2
4
Main unit
7
8
9
DIRECT
STEREO
VIRTUAL
Remote control unit
+
CD SRS
SEARCH MODE
Turn the AV OSD on or off.
SURROUND / SELECT
PUSH - PARAM.
CH
CALL
0/10
+10
-
TEST TONE
INPUT MODE
SURROUND
FUNCTION
TUNER TV / VCR
DVD
IN/SURR.
A/V
SYSTEM
IN/SURR.
MD
Main unit
CDR TAPE
1
2
DVD
8
Remote control unit
+
9
6
-
7
or 0 :ON
STATUS
3
MUTING
SETUP
TONE /SDB
SURROUND
PARAMETER
DISPLAY
ANGLE
or 1 :OFF
2
ENTER
CH SELECT
RETURN
1
VCR CH
MENU
AUDIO
+
TOP MENU
After several seconds, the display turns off and the setting is
made.
SUB TITLE
RC-936
Downloaded From Disc-Player.com Denon Manuals
NOTES:
• Depending on the disc being played, the picture may be
disturbed when the OSD turns on. This is not a malfunction.
If this should happen, set the AV OSD to “OFF”.
• The OSD is also output to the VCR video output terminals.
Do not perform setup or OSD operations while recording with a
video deck.
65
ENGLISH
17 USING THE ON-SCREEN DISPLAY
(1) Operating using the disc information OSD
SLEEP
2 Use this function to display and
change information on the disc
(titles, chapters, time, etc.)
Set the remote
control selector
switches to A/V
and DVD.
CLEAR
TITLE
TV IN
T V
CHARAC.
SLIDE MODE
EDIT/MENU
ZOOM
TV CH
PROG/DIRECT
3
TUNER TV / VCR
DVD
IN/SURR.
A/V
SYSTEM
REPEAT
-
RANDOM
MODE
MEMO
BAND
DVD
TUNER
D.AUX
TIME
TV CH
2
TAPE /LINE-2
4
5
6
+
-
5CH STEREO
AUTO DECODE
TUNER
+
7
8
9
DIRECT
STEREO
VIRTUAL
CALL
0/10
+10
-
TEST TONE
INPUT MODE
SURROUND
FUNCTION
A/V
In the play mode, press the DISPLAY button.
• The On-Screen Display appears.
• The picture on the TV screen switches each time the button is
pressed.
• The items displayed differ from disc to disc.
Example: For DVDs
MUTING
SETUP
TONE /SDB
2
TUNING /
TV VOL
1
3
STATUS
3
+
CD SRS
SEARCH MODE
MD/LINE-1
IN/SURR.
MD
CDR TAPE
1
NTSC/PAL
ENTER
A-B REPEAT
SOURCE
ENTER
SURROUND
PARAMETER
CH SELECT
3
1
CH
DISPLAY
RETURN
ANGLE
TUNER TV / VCR
DVD
IN/SURR.
MENU
AUDIO
RC-936
Remote control unit
CHAPT ER 01/10
00 : 00 : 01
STANDARD
T I T LE REMAI N
01 : 10 : 59
CHAPT ER T IME
00 : 00 : 01
CHAPT ER REMAI N
00 : 40 : 59
SUBT ITLE 1/2 : DOLBY D 3/2/1 ENGLISH
AUDI O
: OFF
• For the on-screen display for video CDs and music
CDs, only the disc time changes.
TOTAL TIME
TRACK
S I NGL E T IME
P I C TURE MODE
01 / 10
26 : 11
STANDARD
S I NGL E REMAIN
03 : 17
TOTAL TIME
06 : 15
TOTAL REMAIN
32 : 05
Use the and •, ª cursor buttons to select the item you wish to change.
• The selected item is displayed with a yellow frame.
q For DVDs
“TITLE”, “CHAPTER”, “TITLE ELAPSED” can be selected.
w For video and music CDs
“TRACK” can be selected.
Remote control unit
3
q Changing the elapsed time
Input using the number buttons, then press the ENTER button.
Example: For 1 minute 26 seconds / “00126”
w Changing the title, track or chapter
• For DVDs
Input using the number buttons, then press the ENTER button.
(For some discs it is not possible to change the title or chapter.)
• For video and music CDs
Input using the number buttons. Playback starts from that track.
66 From Disc-Player.com Denon Manuals
Downloaded
+
TOP MENU
SUB TITLE
DISPLAY
T I T LE 01 / 1 0
T I T LE T IME
P I C TURE MODE
Example: For video and music CDs
2
VCR CH
DVD
TUNER
D.AUX
1
2
3
MD/LINE-1
TAPE /LINE-2
4
7
5
6
5CH STEREO
AUTO DECODE
8
9
STEREO
VIRTUAL
0/10
+10
Remote control unit
ENGLISH
(2) Adjusting the picture quality
• The quality of the picture when playing discs can be adjusted.
STATUS
Set the remote
control selector
switches to A/V
and DVD.
3
SYSTEM
1,2
ENTER
SURROUND
PARAMETER
CH SELECT
-
1
IN/SURR.
MD
TONE /SDB
1,2,3
TUNER TV / VCR
DVD
IN/SURR.
A/V
MUTING
SETUP
DISPLAY
RETURN
ANGLE
MENU
AUDIO
VCR CH
+
TOP MENU
SUB TITLE
CDR TAPE
1
When playing a disc with the function set to DVD, press the
DISPLAY button to turn on the on-screen display, use the • and ª
cursor buttons to select “PICTURE MODE”, then press the
ENTER button.
• The picture quality adjustment screen appears.
• The on-screen display also turns on when the DISPLAY button
is pressed in the stop mode.
DISPLAY
ENTER
\
\
Remote control unit
2
Use the 0 and 1 cursor buttons to select the item, then press the ENTER button.
Standard:
Both the picture quality and functions are set back to the standard settings set
upon shipment from the factory.
Anime:
This sets a brighter more vivid picture quality.
Cinema:
This sets a mellower picture quality.
Memory 1 to 3:
Picture quality settings you have adjusted can be stored at three memory
positions. (Set at step 3)
3
Selecting and adjusting the picture quality
Use the 0 and 1 cursor buttons to select the picture quality item, then use the •
and ª cursor buttons to adjust the value.
• All the adjustments are stored in the memory.
Contrast (-6 to +6) (factory default: 0):
This adjusts the contrast between light and dark portions of the picture.
Brightness (0 to +12) (factory default: 0):
This adjust the brightness (vividness) of the picture.
Color density (-6 to +6) (factory default: 0):
This adjusts the color density.
Hue (-6 to +6) (factory default: 0):
This adjusts the balance between green and red. (This setting does not affect
progressive scan outputs.)
Remote control unit
Remote control unit
ENTER
\
Remote control unit
Remote control unit
To complete the picture quality adjustment:
Press the DISPLAY button again.
NOTE:
• Depending on the disc being played, the picture or sound may be disturbed when the on-screen display is displayed. This is not a
malfunction.
Downloaded From Disc-Player.com Denon Manuals
67
ENGLISH
(3) Playing Repeatedly
2 Use this function to play your favourite audio or video sections repeatedly.
OFF
SLEEP
ON
VCR
REC
NTSC/PAL
TITLE
TV IN
T V
ENTER
A-B REPEAT
CHARAC.
SLIDE MODE
EDIT/MENU
ZOOM
SOURCE
[2]-1,2
Set the remote
control selector
switches to A/V
and DVD.
[1]-1
TUNER TV / VCR
DVD
IN/SURR.
A/V
SYSTEM
CLEAR
TV CH
PROG/DIRECT
REPEAT
TIME
-
RANDOM
MODE
MEMO
BAND
DVD
TUNER
D.AUX
TV CH
+
CD SRS
SEARCH MODE
TUNING /
TV VOL
1
2
MD/LINE-1
TAPE /LINE-2
4
5
6
+
-
5CH STEREO
3
AUTO DECODE
TUNER
7
8
9
+
DIRECT
STEREO
VIRTUAL
CALL
0/10
+10
-
TEST TONE
INPUT MODE
SURROUND
FUNCTION
CH
IN/SURR.
MD
CDR TAPE
TUNER TV / VCR
DVD
IN/SURR.
A/V
SYSTEM
IN/SURR.
MD
CDR TAPE
1
2
+
DVD
8
9
[1] Playing Repeatedly (Repeat Playback)
1
In the play mode, press the REPEAT button.
• The display on the TV screen switches each time the button is
pressed, and the corresponding repeat play or stop mode is set.
lights on the display when the repeat play mode is set. “ALL”
lights when the all repeat play mode is set.
q For DVDs
REPEAT
MEMO
Remote control unit
w For video and music CDs
• Normal playback
• Normal playback
• Chapter repeated
CHAPTER REPEAT
• Track repeated
TRACK REPEAT
• Title repeated
TITLE REPEAT
• Entire disc
repeated
DISC REPEAT
• Repeat playback
cancelled
REPEAT OFF
• Repeat playback
cancelled
REPEAT OFF
To return to normal playback:
Return to normal playback by pressing the REPEAT button until “REPEAT OFF” appears on the TV screen.
68 From Disc-Player.com Denon Manuals
Downloaded
ENGLISH
[2] Playing a Certain Section Repeatedly (A-B Repeat Playback)
1
During playback, press the A-B REPEAT button.
• This sets start point A.
ENTER
A-B REPEAT
A TO B SET A
Remote control unit
2
Press the A-B REPEAT button again.
• This sets end point B, and repeat playback of the A-B section
starts.
ENTER
A-B REPEAT
A TO B SET B
Remote control unit
To return to normal playback:
Press the A-B REPEAT button until “A TO B CANCELLED” appears on the TV screen.
NOTES:
• Repeat playback may not work for some DVDs.
• The repeat playback and A-B repeat playback functions will not work for DVDs and video CDs for which the elapsed time is not shown
on the display during playback.
• In some cases, subtitles may not be displayed near the A and B points during A-B repeat playback.
Downloaded From Disc-Player.com Denon Manuals
69
ENGLISH
(4) Playing Tracks in the Desired Order
2 Use this function with video and music CDs to play the tracks in the desired order.
2 This function does not affect with DVD.
SLEEP
REC
NTSC/PAL
TITLE
TV IN
T V
ENTER
A-B REPEAT
CHARAC.
SLIDE MODE
EDIT/MENU
ZOOM
SOURCE
CLEAR
TV CH
1
Set the remote
control selector
switches to A/V
and DVD.
2
REPEAT
RANDOM
MODE
MEMO
BAND
TUNER
TUNING /
TV VOL
D.AUX
2
TAPE /LINE-2
4
5
6
+
-
5CH STEREO
AUTO DECODE
TUNER
3
+
7
8
9
DIRECT
STEREO
VIRTUAL
CALL
0/10
+10
-
TEST TONE
INPUT MODE
SURROUND
FUNCTION
CH
TUNER TV / VCR
DVD
IN/SURR.
IN/SURR.
MD
+
CD SRS
SEARCH MODE
1
A/V
SYSTEM
TV CH
MD/LINE-1
TUNER TV / VCR
DVD
IN/SURR.
A/V
-
PROG/DIRECT
DVD
TIME
SYSTEM
IN/SURR.
MD
CDR TAPE
CDR TAPE
3
1
2
+
DVD
8
6
9
7
-
STATUS
1
2
Press the PROG/DIRECT button once in the stop mode.
• The program selection screen appears.
Use the number buttons to select the number you want to
program.
• Up to 20 tracks can be programmed.
PROG/DIRECT
MODE
Remote control unit
DVD
TUNER
D.AUX
1
2
3
MD/LINE-1
TAPE /LINE-2
4
7
5
6
5CH STEREO
AUTO DECODE
8
9
STEREO
VIRTUAL
0/10
+10
Remote control unit
Example: To program tracks 5 and 12
Press number button “5”.
Press number button “+10”.
\
3
Press the play button.
• The tracks start playing in the programmed order.
Press number button “2”.
\
1
DVD
Remote control unit
To return to normal playback:
Press the stop button to stop programmed playback, then press the PROG/DIRECT button.
When the play button is next pressed, normal playback begins from the beginning of the disc.
Clearing individual tracks from the program:
Press the stop button to stop programmed playback.
Now press the CLEAR button to clear the last track programmed.
Clearing the entire program:
The entire program is cleared when the power is turned off or the disc is unloaded.
The entire program can also be cleared by pressing the stop button to stop programmed playback then pressing the PROG/DIRECT button.
Checking the programmed tracks:
Press the CALL button to display the programmed tracks in steps.
70 From Disc-Player.com Denon Manuals
Downloaded
ENGLISH
(5) Playing Tracks in the Random Order
2 Use this function with video and music CDs to play the tracks in random order.
2 This function does not affect with DVD.
SLEEP
NTSC/PAL
TITLE
TV IN
T V
ENTER
A-B REPEAT
CHARAC.
SLIDE MODE
EDIT/MENU
ZOOM
SOURCE
CLEAR
TV CH
PROG/DIRECT
REPEAT
RANDOM
MODE
MEMO
BAND
DVD
Set the remote
control selector
switches to A/V
and DVD.
TUNER
D.AUX
1
2
3
MD/LINE-1
TAPE /LINE-2
CDR TAPE
1
TUNING /
TV VOL
5
6
5CH STEREO
AUTO DECODE
TUNER
+
8
9
DIRECT
STEREO
VIRTUAL
CALL
0/10
+10
-
TEST TONE
INPUT MODE
SURROUND
FUNCTION
CH
TUNER TV / VCR
DVD
IN/SURR.
A/V
IN/SURR.
MD
IN/SURR.
MD
+
CD SRS
SEARCH MODE
7
SYSTEM
SYSTEM
TV CH
+
-
4
TUNER TV / VCR
DVD
IN/SURR.
A/V
TIME
-
CDR TAPE
2
1
2
+
DVD
8
6
9
7
-
STATUS
3
1
MUTING
In the stop mode, press the RANDOM button.
• The random play screen appears.
RANDOM
BAND
RANDOM ON
Remote control unit
2
Press the PLAY (1) button.
• The tracks start playing in random order.
1
DVD
Main unit
Remote control unit
• Random playback is not possible for some discs.
To return to normal playback:
Press the STOP (2) button to stop random playback, then press the RANDOM button once.
Downloaded From Disc-Player.com Denon Manuals
71
ENGLISH
(6) MP3 WMA Playback
[1] Listening to Recorded MP3 CD/CD-R/CD-RW
2 There are many music distribution sites on the internet from which music files in MP3 format can be downloaded. Music downloaded as
instructed on the site and written onto a CD-R/RW disc can be played on the ADV-M71.
If music recorded on commercially available music CDs is converted on a computer into MP3 files using an MP3 encoder (conversion software),
the data on a 12 cm CD is reduced into about 1/10 the amount of the original data. Thus, when written in MP3 format, the data of about 10
music CDs can fit onto a single CD-R/RW disc. A single CD-R/RW disc can contain over 100 tracks.
Values when 5-minute tracks are converted with a standard bit rate of 128 kbps into MP3 files and using a CD-R/RW disc with a capacity
of 650 MB.
1
1 3
CALL
0/10
+10
-
TEST TONE
INPUT MODE
SURROUND
FUNCTION
TUNER TV / VCR
DVD
IN/SURR.
A/V
SYSTEM
B
CDR TAPE
PUSH - PARAM.
3
-
TONE / SDB
1
2
+
DVD
+
8
BAND
MENU / SET
VIRTUAL SPEAKER
IN/SURR.
MD
SURROUND / SELECT
DVD SURROUND RECEIVER ADV-M71
9
-
VOLUME
6
7
FUNCTION
STATUS
ON / STANDBY
PHONES
3
MUTING
SETUP
TONE /SDB
2,3
ENTER
SURROUND
PARAMETER
CH SELECT
RETURN
DISPLAY
ANGLE
1
MENU
AUDIO
VCR CH
+
TOP MENU
SUB TITLE
Load the CD-R/RW disc on which the MP3 format
music files have been written into this unit. (See page
39.)
• When the disc is loaded in the ADV-M71, the disc
information screen appears.
• If there are multiple folders, proceed to step 2.
• If there are no folders on the disc (if the disc only
contains MP3 files), proceed to step 3.
All the folders recorded on the disc are displayed.
(The folders are not displayed by layer.)
2
Use the • and ª cursor buttons to select the folder
containing the file(s) you want to play, then press the
ENTER button.
ENTER
\
Remote control unit
To change the folder
Use the • cursor button to select “ROOT” at the
upper right of the screen, then press the ENTER
button. The screen in step 1 reappears. Select the
desired folder.
72 From Disc-Player.com Denon Manuals
Downloaded
Remote control unit
ENGLISH
3
Use the • and ª cursor buttons to select the MP3 file you
want to play, then press the PLAY (1) button or ENTER
button.
• Playback starts.
The display can be switched between the single elapsed
time and the single remaining time by pressing the
Remote control unit
DISPLAY button.
Programmed playback is not possible with MP3 discs.
To change the MP3 file
Press the STOP button, then use the • and ª cursor
1
\
DVD
Main unit
Remote control unit
\
ENTER
buttons to reselect the desired MP3 file.
To set the random play mode
In the stop mode, press the RANDOM button.
Then press the PLAY (1) button or ENTER button.
Remote control unit
To set the repeat mode
The repeat mode changes each time the REPEAT button is
pressed.
NORMAL Æ TRACK REPEAT Æ FOLDER REPEAT
≠
To return to the initial disc information screen
Press the STOP (2) button, use the • cursor button to
select “ROOT” at the upper right of the screen, then press
the ENTER button.
The screen in step 1 reappears.
NOTES:
• The ADV-M71 is compatible with the “MPEG-1 Audio Layer 3” standards (sampling frequency of 32, 44.1 or 48 kHz). It is not compatible
with such other standards as “MPEG-2 Audio Layer 3”, “MPEG-2.5 Audio Layer 3”, MP1, MP2, etc.
• It may not be possible to play some CD-R/RW discs due to disc properties, dirt, warping, etc.
• The digital signals output when playing MP3 files are MP3 signals converted into PCM, regardless of whether the audio output presenting
is set to “normal” or “PCM conversion”. The signals are output with the same sampling frequency as that of the music source.
• In general, the higher an MP3 file’s bit rate, the better the sound quality. On the ADV-M71, we recommend using MP3 files recorded with
bit rates of 128 kbps or greater.
• MP3 files may not be played in the expected order, since the writing software may change the position of the folders and the order of
the files when writing them on the CD-R/RW.
• Manual search and programmed playback are not possible with MP3 discs.
• When writing MP3 files on CD-R/RW discs, select “ISO9660 level 1” as the writing software format. This may not be possible with some
types of writing software. For details, refer to the writing software’s usage instructions.
• With the ADV-M71 it is possible to display folder names and file names on the screen like titles. The ADV-M71 can display up to 11
characters, consisting of numbers, capital letters, and the “_” (underscore) mark.
• If recorded in a format other than “ISO9660 level 1”, normal display and playback may not be possible. In addition, folder and file names
including other symbols will not be displayed properly.
• Be sure to add the extension “.MP3” to MP3 files. Files cannot be played if they have any extension other than “.MP3” or if they have
no extension. (with Macintosh computers, MP3 files can be played by adding the extension “.MP3” after the file name consisting of up
to 8 capital or numbers and recording the files on the CD-R/RW.)
• Do not apply stickers, tape, etc., to either the label side or the signal side of CD-R/RW discs. If adhesive gets on the surface of a disc,
the disc may get stuck inside the ADV-M71 and be impossible to eject.
• The ADV-M71 is not compatible with packet write software.
• The ADV-M71 is not compatible with ID3-Tag.
• The ADV-M71 is not compatible with play lists.
Downloaded From Disc-Player.com Denon Manuals
73
ENGLISH
[2] Listening to Recorded WMA (Windows Media Audio) CD-R/CD-RW
• This unit can play CD-R/RW music files that have been recorded in the WMA (Windows Media Audio)* audio compression format.
Windows Media, and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United
States and/or other countries.
WMA (Windows Media Audio): New audio coding of Microsoft Corporation (U.S.A.)
• Uses of recordings you have made other than for your personal enjoyment are not permitted under the Copyright Law without permission
of the copyright holder.
• The method of playback is the same as “[1] Listening to Recorded MP3 CD/CD-R/CD-RW” on Pages 72 and 73.
• In the file display of the disc information screen, WMA files will be displayed with the “WMA” icon instead of the “MP3” icon.
(Files for which the “WMA” icon is not displayed cannot be played.)
NOTES:
• Files recorded with a sampling frequency (fs) of 32, 44.1, and 48 kHz are supported.
• Programmed playback cannot be performed with WMA files.
• The digital output at the time of WMA file playback is converted to PCM regardless of the initial settings.
• Please use discs that have been recorded in conformity with the ISO 9660 level 1/level 2 CD-ROM file system. (Extended formats are
excluded.)
• Copyright protected files cannot be played. Also note that depending on the writing software and conditions, playback might not be
possible, or the files might not be displayed properly.
• Playback of the CD-R/RW might not be possible depending on the disc characteristics, soiling, scratches, and other factors.
• Bit rates of 64 k to 160 kbps are supported for WMA files that have an extension of “.wma” or “.WMA”.
• This unit can display the folder names and file names on the screen. Up to 11 half-width alphanumeric upper case characters and symbols
(including the underscore symbol) can be displayed.
• While in the stop condition, the DISPLAY button of the remote control can be used to switch and display the title names and the artist
names. (One folder has a capacity of up to 99 files.)
• Recorded discs with no more than 99 files per folder are recommended. Multiple folder configurations are possible; however, depending
on the configuration, playback of all the folders and files might not be possible.
• Multi-session discs and CD-R/RW that have not been finalized can also be played back; however, playback of discs that have had session
closure within 10 sessions or have been finalized is recommended.
• Direct track selection using the remote control numerical keys (0 to 9, and +10) can specify up to 179 tracks (179 files) per folder. When
179 tracks are exceeded, while the unit is stopped use the cursor buttons at the disc information screen to select the files, and use the
play button of the ENTER button to play.
74 From Disc-Player.com Denon Manuals
Downloaded
ENGLISH
(7) Playing still picture files (JPEG format)
2 JPEG files stored on Kodak picture CDs, CD-Rs and CD-RWs can be played as a slide show and enjoyed on the ADV-M71.
[1] Playing Kodak picture CDs/FUJICOLOR CDs
2 Playing Picture CDs and Fujicolor CDs
The ADV-M71 can play Kodak Picture CDs and Fuji Film Fujicolor CDs, so you can view the photographs stored on them on a TV screen.
(Picture CDs and Fujicolor CDs are CDs containing photographs taken on conventional silver film cameras which have been converted into
digital data. For details on Picture CDs, please contact a store providing Kodak development services. For details on Fujicolor CDs, please
contact a store providing Fuji Film development services.)
8
1
1
9
6
-
7
STATUS
3
B
SURROUND / SELECT
DVD SURROUND RECEIVER ADV-M71
PUSH - PARAM.
-
+
BAND
MENU / SET
VIRTUAL SPEAKER
TONE / SDB
VOLUME
Set the remote
control selector
switches to A/V
and DVD.
MUTING
SETUP
TONE /SDB
1-w
ENTER
SURROUND
PARAMETER
CH SELECT
-
FUNCTION
TUNER TV / VCR
DVD
IN/SURR.
ON / STANDBY
PHONES
A/V
RETURN
DISPLAY
ANGLE
SYSTEM
VCR CH
MENU
+
TOP MENU
SUB TITLE
AUDIO
IN/SURR.
MD
CDR TAPE
RC-936
1
Load the Picture CDs or Fujicolor CDs into the set.
• For Picture CDs:
Playback of the still pictures starts automatically when the disc is
loaded.
• For Fujicolor CDs:
When the disc is loaded, up to 9 photos are automatically
displayed on the screen. Use the remote control unit’s cursor
buttons (0, 1, • and ª) to select the photo you want to play, then
press the ENTER button to start playback.
Main unit
For Fujicolor CDs:
\
Press the stop button to stop playback.
Main unit
ENTER
Remote control unit
• “KODAK” is the registered trademark of Eastman kodak Co.
• “FUJICOLOR CD” is the registered trademark of Fuji Photo Film Co.,Ltd.
Downloaded From Disc-Player.com Denon Manuals
75
ENGLISH
[2] Playing still pictures stored on CD-Rs/RWs
1
B
3
SURROUND / SELECT
DVD SURROUND RECEIVER ADV-M71
PUSH - PARAM.
-
+
BAND
MENU / SET
VIRTUAL SPEAKER
TONE / SDB
VOLUME
CALL
0/10
+10
-
TEST TONE
INPUT MODE
SURROUND
FUNCTION
TUNER TV / VCR
DVD
IN/SURR.
A/V
Set the remote
control selector
switches to A/V
and DVD.
SYSTEM
IN/SURR.
MD
CDR TAPE
3
1
2
+
DVD
8
6
9
-
7
STATUS
FUNCTION
3
TUNER TV / VCR
DVD
IN/SURR.
ON / STANDBY
PHONES
A/V
SYSTEM
MUTING
SETUP
TONE /SDB
2,3
IN/SURR.
MD
CDR TAPE
ENTER
SURROUND
PARAMETER
CH SELECT
-
1
Load the CD-R/RW on which the still pictures have
been written into the ADV-M71.
• When the disc is loaded in the ADV-M71, the disc
information screen appears.
+
B
D I SC I NF ORMATION
ROOT
• If there are multiple folders, proceed to step 2.
• If there are no folders on the disc, proceed to step 3.
PL AY MODE
S I GNAL E L APSED
S INGL E :
2
VCR CH
ROOT
0
JPEG 1
1
JPEG 2
2
JPEG 3
3
JPEG 4
4
JPEG 5
5
F OL DE R
: --:-DECISION : ENTER BUT TON
Use the • and ª cursor buttons to select the folder
containing the file(s) you want to play, then press the
ENTER button.
To change the folder
Use the • cursor button to select “ROOT” at the
upper right of the screen, then press the ENTER
button. The screen in step 1 reappears. Select the
desired folder.
B
D I SC I NF ORMATION
Remote control unit
ROOT
••
0
JPEG 1
A
1
JPEG 2
B
2
JPEG 3
C
3
JPEG 4
D
4
JPEG 5
E
5
PL AY MODE
ENTER
S I GNAL E L APSED
S INGL E :
F OL DE R
: --:-DECISION : ENTER BUT TON
Remote control unit
3
Use the • and ª cursor buttons on the remote control
unit to select the still picture file from which you want
to start the slide show, then press the PLAY button or
the ENTER button on the remote control unit.
• The slide show starts.
• Only the still picture files in the selected folder are
played.
Once all the still picture files in the folder have been
played, the disc information screen reappears.
B
D I SC I NF ORMATION
Remote control unit
ROOT
••
0
JPEG 1
A
1
JPEG 2
B
2
JPEG 3
C
3
JPEG 4
D
4
JPEG 5
E
5
PL AY MODE
S I GNAL E L APSED
S INGL E :
F OL DE R
: --:-DECISION : ENTER BUT TON
1
ENTER
DVD
Main unit
76 From Disc-Player.com Denon Manuals
Downloaded
Remote control unit
ENGLISH
To view several of the still pictures stored on the disc at once:
• Press the STOP button to display up to 9 still pictures at once.
• To select and view a still picture (to start the slide show from a specific still picture), use the cursor buttons (ª, •, 0 and 1) to select the
desired still picture, then press the ENTER button.
To temporarily stop the slide show:
• Press the PAUSE button.
• To resume the slide show, press the PLAY button.
To cue a still picture you want to view (from which you want to start the slide show):
• During the slide show, press one of the SKIP (8,9) buttons. Press the SKIP 8 button to cue back to the previous still picture, the
SKIP 9 button to cue ahead to the next still picture.
Flipping and rotating still pictures:
• Use the cursor buttons (ª, •, 0 and 1) to flip the still picture.
The currently displayed still picture is flipped vertically.
• cursor button:
The currently displayed still picture is flipped horizontally.
ª cursor button:
0 cursor button:
1 cursor button:
The currently displayed still picture is rotate 90° counterclockwise.
The currently displayed still picture is rotate 90° clockwise.
Play the image in the zoom mode.
• When the ZOOM button is pressed while playing a JPEG image (“ZOOM ON” is displayed on the screen at this time) zoom in and zoom
out using the search keys.
(6: zoom out, 7: zoom in)
• When the image is zoomed, use the cursor buttons (ª, •, 0 and 1) to move the zoomed picture.
• Continuous playback (SLIDE SHOW) is not possible in the zoom mode.
The way of switching to the next image during continuous JPEG image playback (SLIDE SHOW) can be selected.
• Press the SLIDE MODE button on the remote control unit.
• Select from SLIDE SHOW MODE 1 to MODE 11, MODE RAND and MODE NONE.
Special play modes for MP3/WMA and JPEG files
Use the 0 and 1 cursor buttons to select the play mode, the • and ª cursor buttons to select the special play mode.
• FOLDER (the MP3/WMA and JPEG files in the folder are played in order starting from the selected file)
• FOLDER REPEAT (all the MP3/WMA and JPEG files in the folder are played repeatedly starting from the selected file)
• DISC (all the MP3/WMA and JPEG files on the disc are played in order starting from the selected file)
• DISC REPEAT (all the MP3/WMA and JPEG files on the disc are played repeatedly starting from the selected file)
• RANDOM ON (all the MP3/WMA and JPEG files in the folder are played in random order starting from the selected file)
• TRACK REPEAT (the select MP3/WMA or JPEG file is played repeatedly)
NOTES:
• The ADV-M71 is compatible with image data stored in JPEG format, but Denon does not guarantee that all image data stored in JPEG
format can be viewed.
• Pictures with resolutions of up to 2048 x 1536 pixels can be displayed.
• It may not be possible to play some CD-Rs/RWs due to disc properties, dirt, scratches, etc.
• When storing JPEG files on the CD-R/RW, set the writing program to store the files in the “ISO9660 level 1” format.
• Be sure to give JPEG files the extension “.JPG” and “.JPE”. Files with other extensions or with no extensions cannot be viewed on the
ADV-M71.
• Do not apply stickers, tape, etc., to either the label side or the signal side of CD-R/RW discs. If adhesive gets on the surface of a disc,
the disc may get stuck inside the ADV-M71 and be impossible to eject.
• Do not play CD-R/RW discs containing any files other than music CD files (in CDA format), MP3/WMA and JPEG files. Doing so may
result in malfunction or damage, depending on the type of file.
• JPEG files written using Macintosh computers cannot be played.
Downloaded From Disc-Player.com Denon Manuals
77
ENGLISH
(8) Using the Multiple Audio, Subtitle and Angle Functions
[1] Switching the Audio Language (Multiple Audio Function)
2 With DVDs containing multiple audio language signals, the audio language can be switched during playback.
CDR TAPE
1
2
+
DVD
8
9
6
Set the remote
control selector
switches to A/V
and DVD.
-
7
STATUS
3
MUTING
SETUP
TONE /SDB
2
ENTER
SURROUND
PARAMETER
CH SELECT
TUNER TV / VCR
DVD
IN/SURR.
A/V
DISPLAY
RETURN
SYSTEM
MENU
VCR CH
+
TOP MENU
IN/SURR.
MD
CDR TAPE
ANGLE
AUDIO
SUB TITLE
1
RC-936
1
During playback, press the AUDIO button.
• The current audio language number is displayed.
AUDIO
AUDIO 1/3:DOLBY D3/2/.1 ENG
Remote control unit
2
Use the • and ª cursor buttons to select the desired
language.
• The display turns off when the AUDIO button is pressed.
AUDIO 2/3:DOLBY D3/2/.1 FRA
Remote control unit
NOTES:
• With some discs it is not possible to change the audio language during playback. In such cases, select from the DVD menu. (See page
93.)
• If the desired language is not set after pressing the • and ª cursor buttons several times, the disc does not include that language.
• The language selected in the default settings is set when the power is turned on and when the disc is replaced.
78 From Disc-Player.com Denon Manuals
Downloaded
ENGLISH
[2] Switching the Subtitle Language (Multiple Subtitle Function)
2 With DVDs containing multiple subtitle language signals, the subtitle language can be switched during playback.
CDR TAPE
1
2
+
DVD
8
9
6
Set the remote
control selector
switches to A/V
and DVD.
-
7
STATUS
3
MUTING
SETUP
TONE /SDB
2
ENTER
SURROUND
PARAMETER
CH SELECT
TUNER TV / VCR
DVD
IN/SURR.
A/V
DISPLAY
RETURN
SYSTEM
MENU
VCR CH
CDR TAPE
ANGLE
AUDIO
+
TOP MENU
IN/SURR.
MD
SUB TITLE
1
RC-936
1
During playback, press the SUBTITLE button.
• The current subtitle language number is displayed.
SUB TITLE
SUBTITLE
01/03:ENG
SUBTITLE
02/03:FRA
Remote control unit
2
Use the • and ª cursor buttons to select the desired
language.
• The display turns off when the SUBTITLE button is
pressed.
Remote control unit
NOTES:
• If the desired language is not set after pressing the • and ª cursor buttons several times, the disc does not include that language.
• The subtitle language set with the default settings is set when the power is turned on and when the disc is replaced. If that language is
not included on the disc, the disc’s default language is set.
• When the subtitle language is changed, several seconds may be required for the new language to appear.
• When a disc supporting the closed caption is played, the subtitle and the closed caption may overlap each other on the TV monitor. In
this case, turn the subtitle off.
Downloaded From Disc-Player.com Denon Manuals
79
ENGLISH
[3] Switching the Angle (Multiple Angle Function)
2 With DVDs containing multiple angle signals, the angle can be switched during playback.
CDR TAPE
1
2
+
DVD
8
9
6
Set the remote
control selector
switches to A/V
and DVD.
-
7
STATUS
3
MUTING
SETUP
TONE /SDB
2
ENTER
SURROUND
PARAMETER
CH SELECT
TUNER TV / VCR
DVD
IN/SURR.
A/V
RETURN
SYSTEM
IN/SURR.
MD
CDR TAPE
1
DISPLAY
ANGLE
VCR CH
MENU
AUDIO
+
TOP MENU
SUB TITLE
RC-936
1
During playback, press the ANGLE button.
• The current angle number is displayed.
3/5
ANGLE
Remote control unit
2
Use the • and ª cursor buttons to select the desired angle.
• The display turns off when the ANGLE button is pressed.
4/5
Remote control unit
NOTES:
• The multiple angle function only works with discs on which multiple angles are recorded.
• At scenes where multiple angles are recorded, the angle can be switched.
80 From Disc-Player.com Denon Manuals
Downloaded
ENGLISH
(9) Using the Menus
[1] Using the Top Menu
2 For DVDs containing multiple titles, the desired title can be selected and played from the top menu.
CDR TAPE
OFF
1
ON
VCR
REC
NTSC/PAL
TITLE
TV IN
T V
CLEAR
ENTER
A-B REPEAT
CHARAC.
SLIDE MODE
EDIT/MENU
ZOOM
PROG/DIRECT
REPEAT
RANDOM
MODE
MEMO
BAND
DVD
TUNER
D.AUX
SLEEP
SOURCE
2
8
TV CH
Set the remote
control selector
switches to A/V
and DVD.
2
TUNER TV / VCR
DVD
IN/SURR.
A/V
SYSTEM
IN/SURR.
MD
-
TV CH
6
TUNING /
TV VOL
3
2
TAPE /LINE-2
4
5
6
+
-
5CH STEREO
AUTO DECODE
TUNER
3
7
8
9
STEREO
VIRTUAL
0/10
+10
TEST TONE
INPUT MODE
SURROUND
-
7
STATUS
1
CALL
9
+
CD SRS
SEARCH MODE
MD/LINE-1
DIRECT
+
DVD
TIME
MUTING
SETUP
TONE /SDB
3
2
+
CH
ENTER
SURROUND
PARAMETER
CH SELECT
-
-
VCR CH
+
1
FUNCTION
RETURN
DISPLAY
MENU
TOP MENU
CDR TAPE
TUNER TV / VCR
DVD
IN/SURR.
A/V
SYSTEM
ANGLE
AUDIO
SUB TITLE
IN/SURR.
MD
CDR TAPE
1
2
DVD
8
1
RC-936
+
9
Example:
During playback, press the TOP MENU button.
• The top menu appears.
TOP MENU
TOP MENU
Apple
Banana
Orange
Strawberry
Peach
Pineapple
Remote control unit
2
Use the cursor or number buttons to select the desired title.
• If you select the title number using the number buttons, skip step
3 below.
DVD
TUNER
D.AUX
1
2
3
MD/LINE-1
TAPE /LINE-2
4
7
5
6
5CH STEREO
AUTO DECODE
8
9
STEREO
VIRTUAL
0/10
+10
Remote control unit
Remote control unit
Example:
When “Orange” is selected
TOP MENU
3
Press the ENTER button.
• Playback starts.
• Playback also starts if the PLAY (1) button is pressed.
Apple
Banana
Orange
Strawberry
Peach
Pineapple
ENTER
Remote control unit
Downloaded From Disc-Player.com Denon Manuals
81
ENGLISH
[2] Using the DVD Menu
2 Some DVDs include special menus called DVD menus.
For example, DVDs with complex contents may contain guide menus, and DVDs with multiple languages may contain audio and subtitle
language menus.
These menus are called “DVD menus”.
Here we describe the general procedure for using DVD menus.
CDR TAPE
OFF
1
ON
VCR
REC
NTSC/PAL
TITLE
TV IN
T V
CLEAR
ENTER
A-B REPEAT
CHARAC.
SLIDE MODE
EDIT/MENU
ZOOM
PROG/DIRECT
REPEAT
RANDOM
MODE
MEMO
BAND
DVD
TUNER
D.AUX
SLEEP
SOURCE
2
8
TV CH
Set the remote
control selector
switches to A/V
and DVD.
TUNER TV / VCR
DVD
IN/SURR.
A/V
SYSTEM
IN/SURR.
MD
2
-
TV CH
6
TUNING /
TV VOL
3
2
TAPE /LINE-2
4
5
6
+
-
5CH STEREO
AUTO DECODE
TUNER
3
7
8
9
STEREO
VIRTUAL
0/10
+10
TEST TONE
INPUT MODE
SURROUND
-
7
STATUS
1
CALL
9
+
CD SRS
SEARCH MODE
MD/LINE-1
DIRECT
+
DVD
TIME
MUTING
SETUP
TONE /SDB
3
2
+
ENTER
SURROUND
PARAMETER
CH SELECT
CH
-
-
VCR CH
+
FUNCTION
DISPLAY
RETURN
MENU
1
TOP MENU
CDR TAPE
TUNER TV / VCR
DVD
IN/SURR.
A/V
SYSTEM
ANGLE
AUDIO
SUB TITLE
IN/SURR.
MD
CDR TAPE
1
2
DVD
8
1
RC-936
+
9
Example:
During playback, press the MENU button.
• The DVD menu appears.
DVD MENU
1. SUB TITLE
MENU
2. AUDIO
3. ANGLE
Remote control unit
2
Use the cursor or number buttons to select the desired item.
• If you select the item using the number buttons, skip step 3
below.
DVD
TUNER
D.AUX
1
2
3
MD/LINE-1
TAPE /LINE-2
4
7
5
6
5CH STEREO
AUTO DECODE
8
9
STEREO
VIRTUAL
0/10
+10
Remote control unit
Remote control unit
Example:
“AUDIO” is selected
DVD MENU
1. SUB TITLE
2. AUDIO
3. ANGLE
3
Press the ENTER button.
• The selected item is set.
• If more menus appear, repeat steps 2 and 3.
ENTER
Remote control unit
82 From Disc-Player.com Denon Manuals
Downloaded
ENGLISH
(10) Playing in the zoom mode
CDR TAPE
OFF
SLEEP
1
ON
VCR
REC
NTSC/PAL
TITLE
TV IN
T V
ENTER
A-B REPEAT
CHARAC.
SLIDE MODE
EDIT/MENU
ZOOM
SOURCE
8
CLEAR
TV CH
Set the remote
control selector
switches to A/V
and DVD.
TUNER TV / VCR
DVD
IN/SURR.
A/V
SYSTEM
IN/SURR.
MD
PROG/DIRECT
REPEAT
-
RANDOM
MODE
MEMO
BAND
DVD
TUNER
D.AUX
TV CH
2
+
DVD
TIME
+
CD SRS
SEARCH MODE
1
9
6
-
7
STATUS
TUNING /
TV VOL
1
2
MD/LINE-1
TAPE /LINE-2
4
5
6
+
-
5CH STEREO
3
AUTO DECODE
TUNER
7
8
9
+
DIRECT
STEREO
VIRTUAL
CALL
0/10
+10
-
TEST TONE
INPUT MODE
SURROUND
FUNCTION
3
MUTING
SETUP
TONE /SDB
2
ENTER
CH
SURROUND
PARAMETER
CH SELECT
DISPLAY
RETURN
MENU
VCR CH
+
TOP MENU
CDR TAPE
TUNER TV / VCR
DVD
IN/SURR.
A/V
SYSTEM
ANGLE
AUDIO
SUB TITLE
IN/SURR.
MD
CDR TAPE
1
2
DVD
8
1
+
RC-936
9
In the play or pause mode, press the ZOOM button.
• The zoom rate increases each time the ZOOM button is pressed.
For DVD video discs and video CDs:
OFF Æ x1.5 Æ x2 Æ x4 Æ OFF
EDIT/MENU
ZOOM
TV CH
+
Remote control unit
2
Use the cursor buttons (ª, •, 0 and 1) to move the zoomed
picture.
Remote control unit
NOTES:
• Zooming is not possible with some discs.
• The zoom function may not work properly at some scenes.
• Zooming is not possible at the top menu or the menu screen.
Downloaded From Disc-Player.com Denon Manuals
83
ENGLISH
18 USING THE TIMER
2 Timer and system operations are possible once the setup procedure has been completed.
(1) Setting the clock (12-hour display)
Example: Setting the current time to “7:30 p.m.”
4,6 2,3,5,7
B
5
SURROUND / SELECT
DVD SURROUND RECEIVER ADV-M71
PUSH - PARAM.
TONE / SDB
Adj
PM 7:00
MENU / SET
+
BAND
MENU / SET
VIRTUAL SPEAKER
Press the MENU/SET button.
VOLUME
FUNCTION
Main unit
ON / STANDBY
PHONES
6
1
1
Turn the SURROUND/SELECT knob to move to the minutes
position.
Adj
PM 7:30
SURROUND / SELECT
PUSH - PARAM.
Turn on the power.
ON / STANDBY
Main unit
Main unit
2
Press the MENU/SET button to display “Time”.
Time AM12:00
7
Press the MENU/SET button at the sound of a time signal,
etc.
• The “30” in the minutes place stops flashing and the
current time is displayed.
Time PM 7:30
MENU / SET
MENU/SET
Main unit
Main unit
• If the time has not yet been set or if there has been a
power shortage, the time display flashes.
• If the time has been set, the current time is displayed.
3
Press the MENU/SET button and hold it in for over 2 seconds.
• The hours position flashes.
Adj
AM12:00
MENU/SET
Main unit
4
Turn the SURROUND/SELECT knob to set the hours.
Adj
PM 7:00
To check the current time when the regular display is displayed,
press the MENU/SET button once. The current time remains
displayed until some other operation is performed.
The time can be displayed by pressing the MENU/SET button
when the power is in the standby mode. (When this is done, the
set is no longer in the low power consumption standby mode.)
When pressed twice while the time is displayed, the display turns
off and the set is put back in the low power consumption standby
mode.
The current time can also be set when the power is in the standby
mode by pressing the MENU/SET button to display the time then
performing steps 3 to 7.
The clock runs by synchronizing with the power supply frequency.
The time may be off by 2 to 3 minutes per month. If so, reset the
time.
SURROUND / SELECT
PUSH - PARAM.
Main unit
Before setting the timer
2 Be sure to set the current time. If the current time is not set, the timer standby indicator
does not light and the timer will not function.
2 Be sure to preset the broadcast station before setting the timer. (See page 63.).
2 Everyday timer: The power is switched on and off (standby) once at the same time each day.
Once timer: The power is switched on and off (standby) at the specified time once only.
Sleep timer: The power can be set to turn off in 120 minutes, 90 minutes, or between 60 and 10 minutes in 10 minute steps.
2 If the times set for the everyday timer, once timer and sleep timer overlap, the sleep timer has priority. The once time has priority if the everyday
timer and once timer times overlap.
2 It is not possible to set the timer start and stop times to the same time.
84 From Disc-Player.com Denon Manuals
Downloaded
ENGLISH
(2) Setting the everyday timer and once timer
2 Be sure to set the current time before setting the timer. (See page 84.)
2 Use the everyday timer to switch the power on and off (standby) once at the same time each day.
Use the once timer to switch the power on and off (standby) at the specified time once only.
2 With the ADV-M71 it is possible to play the tuner, a DVD or a CD with the timer.
2 It is possible to play a DVD, CD, tape, the tuner, MD or the device connected to the AUX terminals with the timer and to record the tuner or
the device connected to the AUX terminals onto an MD recorder or cassette deck using the timer.
Timer playback is not possible for some DVDs. (Most DVDs stop at the menu screen.)
Example 1: Listening to preset station “3” (FM 92.5 MHz) from p.m.12:35 to p.m.12:56 with the everyday timer
2,3,4,6,8,
3,5,7,9,11,
13,15,17 10,12,14,16
B
5
Turn the SURROUND/SELECT knob and set the function to
“TUNER”.
SURROUND / SELECT
PUSH - PARAM.
E
TUNER
SURROUND / SELECT
DVD SURROUND RECEIVER ADV-M71
PUSH - PARAM.
Main unit
-
+
BAND
MENU / SET
VIRTUAL SPEAKER
TONE / SDB
The function switches as shown below each time the
surround button is pressed.
Functions marked “*” differ according to whether “LINE1” or “LINE-2” is set.
VOLUME
FUNCTION
ON / STANDBY
PHONES
DVD
1,18
1
*AUX
*TU
*(LINE2)
*TU
(LINE1)
:Clockwise turn
:Counterclockwise turn
ON / STANDBY
6
Press the MENU/SET button.
MENU / SET
Press the MENU/SET button to display “TIMER”.
Main unit
TIMER
MENU/SET
7
Main unit
3
2)
(LINE1 or
(LINE2)
*(LINE1)
Turn on the power.
Main unit
2
TUNER
Turn the SURROUND/SELECT knob to display “EVERYDAY”,
then press the MENU/SET button.
• The display switches as follows
SURROUND / SELECT
each time the SURROUND/SELECT
PUSH - PARAM.
knob is turned:
Turn the SURROUND/SELECT knob and select preset number
“P03”.
P03
FM
92.50M
SURROUND / SELECT
PUSH - PARAM.
Main unit
8
EVERYDAY
Main unit
Press the MENU/SET button.
• The data for the selected station is stored in the memory
and the unit is set to the timer start time setting mode.
• “E” and “on” are displayed.
MENU / SET
The display switches as follows
each time the
SURROUND/SELECT knob is
turned:
ONCE
4
EVERYDAY
FUNC
9
<Setting the timer start time>
Turn the SURROUND/SELECT knob to set the hours place to
“PM12”.
MENU/SET
E
Main unit
Downloaded From Disc-Player.com Denon Manuals
on AM12:00
Main unit
Main unit
Press the MENU/SET button.
E
E
MENU/SET
on PM12:00
SURROUND / SELECT
PUSH - PARAM.
Main unit
85
ENGLISH
10
Press the MENU/SET button.
• The “PM12” in the hours place is stored in the memory.
E
on PM12:00
17
MENU/SET
Main unit
11
Turn the SURROUND/SELECT knob and set the minutes
place to “35”.
Turn the SURROUND/SELECT knob to display “Eon”.
• The everyday timer is turned on and
SURROUND / SELECT
PUSH - PARAM.
the timer standby indicator
lights. This completes the setting of
the timer.
Main unit
For more details, see “Turning the
everyday timer and once timer on
and off” on page 85.
1
off/E on
SURROUND / SELECT
PUSH - PARAM.
E
on PM12:35
18
Main unit
12
Press the MENU/SET button.
• The start time is stored in the memory and the unit is set
to the timer stop time setting mode.
• “E” and “off” light.
MENU/SET
E
offAM12:00
Main unit
13
<Setting the timer stop time>
Turn the SURROUND/SELECT knob to set the hours place to
“PM12”.
SURROUND / SELECT
PUSH - PARAM.
E
offPM12:00
Main unit
14
Press the MENU/SET button.
• The “PM12” in the hours place is stored in the memory.
E
offPM12:00
MENU/SET
Main unit
15
Turn the SURROUND/SELECT knob and set the minutes
place to “56”.
SURROUND / SELECT
PUSH - PARAM.
E
offPM12:56
Main unit
16
Press the MENU/SET button.
• The stop time is stored in the memory.
MENU/SET
Main unit
86 From Disc-Player.com Denon Manuals
Downloaded
Turn off the power.
• The standby mode is set.
(The power indicator turns orange.)
• When the timer start time is
reached, the timer operates.
ON / STANDBY
Main unit
If you make a mistake when setting the
BAND
timer
• Press the stop button at any point
between steps 4 and 15. (The display
returns to as it was in step 3.)
Main unit
• Press the MENU/SET button repeatedly
to display the item you want to correct,
then correct the item.
• After correcting the item, press the MENU/SET button again
repeatedly to proceed to step 18 and complete the setting of the
timer.
NOTE:
• The timer standby indicator
does not light if the current time
has not been set. Set the current time before setting the timer.
(See page 84.)
ENGLISH
Example 2: Listening to a CD with the once timer
4,6
2
4
2
Turn the SURROUND/SELECT knob to display “ONCE”, then
press the MENU/SET button.
SURROUND / SELECT
PUSH - PARAM.
B
ONCE
SURROUND / SELECT
DVD SURROUND RECEIVER ADV-M71
PUSH - PARAM.
-
+
BAND
MENU / SET
VIRTUAL SPEAKER
TONE / SDB
VOLUME
The display switches as follows
each time the
SURROUND/SELECT knob is
turned:
FUNCTION
ON / STANDBY
PHONES
1
ONCE
3,4,5,7
1
MENU / SET
EVERYDAY
Main unit
Turn on the power.
ON / STANDBY
5
Press the MENU/SET button.
• The once timer time setting mode is set.
• “1” (once) lights.
MENU / SET
1
FUNC
Main unit
2
Main unit
Open the disc holder, load the CD,
then close the disc holder.
Main unit
6
Turn the SURROUND/SELECT knob and set the function to
“DVD”.
1
DVD
SURROUND / SELECT
PUSH - PARAM.
Main unit
3
Press the MENU/SET button to
display “TIMER”.
Main unit
MENU/SET
TIMER
7
Press the MENU/SET button.
• Timer function, “DVD”, is stored in
the memory.
MENU / SET
Main unit
Main unit
8
Now follow steps 9 to 18 under “Setting the everyday timer
and once timer” (pages 85 and 86).
• “1” and “on” light when setting the start time.
“1” and “off” light when setting the stop time.
• Turn the once timer on at step 17.
2 Timer playback and recording can be performed when system connections are made between the ADV-M71 and the D-M31 series cassette
deck (DRR-M31). (Both the everyday and once timer can be used.)
• Timer playback of the cassette deck (when TAPE is set for LINE-2)
• Timer playback of the device connected to the AUX input terminals (when AUX is set for LINE-1 or LINE-2)
• Timer recording of radio programs from the ADV-M71 onto the cassette deck (when TAPE is set for LINE-1)
• Timer recording from the device connected to the AUX input terminals onto the cassette deck (when AUX is set for LINE-1 and TAPE is set
for LINE-2)
Timer recording onto the device connected to the AUX input terminals is not possible. The timer function changes automatically according
to the function set for LINE-1 and LINE-2.
NOTE:
• For timer recording and playback using the device connected to the AUX input terminals, note that the ADV-M71 cannot control the power
of the device or playback operations on it. Make the settings accordingly.
Downloaded From Disc-Player.com Denon Manuals
87
ENGLISH
(3) Turning the everyday timer and once timer on and off
• After the timer has been set using the procedure described under “(2) Setting the everyday timer and once timer” (pages 85 to 86), turn the
everyday timer and/or once timer on so that the set operations will be performed.
2
B
• If only the once timer is set, the setting
changes as shown below each time the
SURROUND/SELECT knob is turned.
SURROUND / SELECT
DVD SURROUND RECEIVER ADV-M71
PUSH - PARAM.
-
+
BAND
MENU / SET
VIRTUAL SPEAKER
TONE / SDB
1on/E
off
1 o f f / E o ff
VOLUME
SURROUND / SELECT
PUSH - PARAM.
Main unit
FUNCTION
• If only the everyday timer is set, the setting changes as follows:
ON / STANDBY
PHONES
1off/E
on
1 o f f / E o ff
1
1
Press the MENU/SET button to set the timer standby setting
mode.
• The current settings are displayed.
MENU/SET
1
on/E
on
Main unit
2
Turn the SURROUND/SELECT knob and select the timer to be
operated.
SURROUND / SELECT
PUSH - PARAM.
• The display switches as follows
each time the
SURROUND/SELECT knob is
turned:
Main unit
on
Both the once timer and everyday
timer are activated.
1
on/E
1
off/E on
Only the everyday timer is activated.
1
on/E
Only the once timer is activated.
1
off/E off
off
Neither the once timer nor the
everyday timer are activated.
• When either the once or everyday timer is activated, the
timer standby indicator
lights. The display returns to
normal about 4 seconds after the timer standby indicator
is displayed.
The timer operation is performed when the SURROUND/SELECT
knob has been turned and the timer standby indicator
has
been lit.
If you do not want the timer to operate,
turn the SURROUND/SELECT knob to turn
the timer standby indicator
off.
SURROUND / SELECT
PUSH - PARAM.
Main unit
88 From Disc-Player.com Denon Manuals
Downloaded
NOTES:
• The timer standby indicator
does not light if the current time
has not been set. Set the current time before setting the timer.
(See page 84.)
• If the times set for the everyday timer and once timer overlap,
the once time has priority.
• Be sure to set the power to the standby mode when you want
the timer to operate.
ENGLISH
(4) Everyday timer and once timer priority
• If the times set for the everyday timer and once timer overlap, the once time has priority.
(5) About the everyday timer and once timer
2 Checking the timer settings
• Use the same procedure as when setting the timer to check the timer settings.
q
w
e
r
Press the MENU/SET button to display “TIMER”.
Turn the SURROUND/SELECT knob to display “EVERYDAY” or “ONCE”.
The display switches between the set function, start time, stop time and timer standby indicator each time the MENU/SET button is pressed.
The display returns to as it was before the everyday timer or once timer was set about 4 seconds after the timer standby indicator is
displayed.
2 Changing the timer settings
• Reset the timer from the start using the desired settings.
The new settings overwrite the previous settings.
• To change a setting during the process of setting the timer, press the stop button (2) to return to the “EVERYDAY” or “ONCE” display, then
redo the operation from there.
2 Clearing the timer settings
q Press the MENU/SET button to display “TIMER”.
w Turn the SURROUND/SELECT knob to display “EVERYDAY” or “ONCE” (the timer whose settings you want to clear).
e While “EVERYDAY” or “ONCE” is displayed, press the stop button (2) and hold it in for at least 2 seconds. Those timer settings are cleared.
2 Quitting the timer setting (turning the operation of the timer off)
• Operate as described under “(3) Turning the everyday timer and once timer on and off” (page 85) and change the setting to the mode in
which neither the once timer nor the everyday timer are activated (“1off/Eoff”).
2 If there is a power failure)
• If there is a power failure or the power cord is unplugged from the power outlet, the time display flashes when the power comes back on.
Reset the current time.
• The once timer settings are deleted. Remake the settings.
• If the everyday timer settings and the tuner presettings have been deleted, reset them.
Downloaded From Disc-Player.com Denon Manuals
89
ENGLISH
(6) Setting the sleep timer (remote control unit only)
• The included remote control unit can be used to turn the power to the standby mode after a maximum of 120 minutes. (Sleep timer)
• Use this function to automatically switch the power to the standby mode after a specific amount of time (minutes).
Example: To set the power to the standby mode in 50 minutesaccording to the clock. Be sure to correct the current time setting.
Set the remote
control selector
switches to A/V
and IN/SURR..
OFF
SYSTEM
T V
CHARAC.
SLIDE MODE
EDIT/MENU
ZOOM
SOURCE
CLEAR
TV CH
CDR TAPE
-
PROG/DIRECT
REPEAT
RANDOM
MODE
MEMO
BAND
DVD
IN/SURR.
MD
TITLE
TV IN
ENTER
A-B REPEAT
SLEEP
2,3
TUNER TV / VCR
DVD
IN/SURR.
A/V
ON
VCR
REC
NTSC/PAL
TUNER
D.AUX
TIME
TV CH
+
CD SRS
SEARCH MODE
TUNING /
TV VOL
1
2
MD/LINE-1
TAPE /LINE-2
4
5
6
+
-
5CH STEREO
3
AUTO DECODE
TUNER
7
8
9
+
DIRECT
STEREO
VIRTUAL
8:00p.m.
CH
CALL
0/10
+10
-
TEST TONE
INPUT MODE
SURROUND
FUNCTION
NOTES:
• If the SLEEP button is pressed while the sleep timer is
operating, the setting returns to 120 minutes. Make the setting
over.
• If the sleep timer and everyday timer settings overlap, the sleep
timer has priority.
Everyday timer
once timer setting
9:00p.m.
ON
10:00p.m.
OFF
+
1
Select and play the desired function.
2
Press the SLEEP button.
Sleep timer
setting
ON
OFF
If the timers overlap like this, the timer operates as follows:
8:00p.m.
Timer operation
• “120” is displayed and the “SLEEP” indicator flashes.
ON
10:00p.m.
OFF
Does not operate
• Also, the everyday timer will not operate if its start time is set
within the time during which the sleep timer is operating.
SLEEP
SOURCE
120
9:00p.m.
SLEEP
8:00p.m.
Remote control unit
9:00p.m.
10:00p.m.
Does not operate
Everyday timer
once timer setting
ON
OFF
+
The display switches as follows each time the SLEEP
button is pressed:
120
90
60
50
40
30
20
When the “SLEEP” indicator is flashing, press the SLEEP
button again until “50” is displayed.
• “50” is displayed and the “SLEEP” indicator flashes.
50
SLEEP
SOURCE
SLEEP
Remote control unit
• After 4 seconds, the display returns to as it was before the
sleep timer was set, and the “SLEEP” indicator stops
flashing, remaining lit. (This completes the sleep timer
setting.)
4
The power is set to the standby mode 50 minutes later.
To turn the sleep timer off, press the SLEEP button repeatedly until
the “SLEEP” indicator turns off. The sleep timer can also be
turned off by press the power button on the main unit or the
remote control unit to turn the entire system’s power to the
standby mode.
ON / STANDBY
SLEEP
OFF
SOURCE
Remote control unit
Main unit
90 From Disc-Player.com Denon Manuals
Downloaded
ON
OFF
• The remaining time of the sleep timer can be checked with the
STATUS button.
10
“SLEEP” indicator off
3
Sleep timer
setting
Remote control unit
ENGLISH
19 CHANGING THE DEFAULT SETTINGS (DVD)
2 The initial setting that was set prior to shipping from the factory can be changed.
The setting contents are maintained until they are next changed even when the power is switched off.
1
In the stop mode, press the SETUP button.
At the Setup Menu, use the • and ª cursor buttons to select
“DVD SETUP” and press the ENTER button.
SETUP
Remote control unit
d
Remote control unit
d
ENTER
Remote control unit
2
The setup (default settings) screen “DVD SETUP MENU”
appears.
• DISC SETUP
Use this to set the language to be used when playing the
disc.
If the set language is not offered on that disc, the discs
default language is set.
• OSD SETUP
Use this to set the wall paper color.
• VIDEO SETUP
Use this to set this unit screen mode.
(TV aspect and TV type.)
• AUDIO SETUP
Use this to set this unit audio output mode.
(Digital and LPCM output settings.)
• RATINGS
Use this to disable playback of adult DVDs so that children
cannot watch them. Note that playback of adult DVDs
cannot be disabled if the rating level is not recorded on the
DVD, but that it is possible to disable playback of all DVDs.
• OTHER SETUP
Closed captions (subtitles) and the time interval for playing
still pictures can be set.
Remote control unit
d
ENTER
Remote control unit
Use the 0 and 1 cursor buttons to select the desired setting
item, then press the ENTER button.
To exit the DVD setup mode
Use the 0 and 1 cursor buttons to select “EXIT SETUP”, then press the ENTER button. It is also possible to quit by pressing the SETUP
button on the remote control unit.
Downloaded From Disc-Player.com Denon Manuals
91
ENGLISH
(1) “DISC SETUP” is selected
1
See page 91.
2
3
Use the 0 and 1 cursor buttons to select the “DISC
SETUP”, then press the ENTER button.
• DIALOG
Use this to set the language of the sound output from
the speakers.
• SUBTITLE
Use this to set the language of the subtitles displayed on
the TV.
• DISC MENUS
Use this to set the language of the menus recorded on
the disc (top menu, etc.).
To exit the disc setup mode
Use the • and ª cursor buttons to select “> NEXT DVD
MENU”, then press the ENTER button.
Remote control unit
d
ENTER
Remote control unit
4
Use the • and ª cursor buttons to select the desired
setting, then press the ENTER button.
2 When “DIALOG” is selected:
• ENGLISH (Factory default)
Select this when you want to play the DVD with the
sound in English.
• FRENCH
Select this when you want to play the DVD with the
sound in French.
• SPANISH
Select this when you want to play the DVD with the
sound in Spanish.
• GERMAN
Select this when you want to play the DVD with the
sound in German.
• JAPANESE
Select this when you want to play the DVD with the
sound in Japanese.
• OTHERS
The sound is played in the language input with the number
buttons. (See the table of language numbers on page 94.)
92 From Disc-Player.com Denon Manuals
Downloaded
Remote control unit
d
ENTER
Remote control unit
ENGLISH
4
To exit the dialog mode
Press the ENTER button, you can go back to the previous
screen.
2 When “SUBTITLE” is selected:
• OFF (Factory default)
Select this if you do not want to display the subtitles. (For
some discs it is not possible to turn off the subtitle
display.)
• ENGLISH
Select this when you want to play the DVD with the
subtitles in English.
• FRENCH
Select this when you want to play the DVD with the
subtitles in French.
• SPANISH
Select this when you want to play the DVD with the
subtitles in Spanish.
• GERMAN
Select this when you want to play the DVD with the
subtitles in German.
• JAPANESE
Select this when you want to play the DVD with the
subtitles in Japanese.
• OTHERS
Subtitles are played in the language input with the number
buttons. (See the table of language numbers on page 94.)
Remote control unit
d
ENTER
Remote control unit
To exit the subtitle mode
Press the ENTER button, you can go back to the previous
screen.
2 When “DISC MENUS” is selected:
• ENGLISH (Factory default)
Select this when you want to display the menus in
English.
• FRENCH
Select this when you want to display the menus in
French.
• SPANISH
Select this when you want to display the menus in
Spanish.
• GERMAN
Select this when you want to display the menus in
German.
• JAPANESE
Select this when you want to display the menus in
Japanese.
• OTHERS
The menu screen is played in the language input with the
number buttons.
(See the table of language numbers on page 94.)
To exit the disc menus mode
Press the ENTER button, you can go back to the previous
screen.
Downloaded From Disc-Player.com Denon Manuals
Remote control unit
d
ENTER
Remote control unit
93
ENGLISH
Language code list
Code
Language
Code
Language
Code
Language
Code
Language
6565
Afar
7079
Faroese
7678
Lingala
8375
Slovak
6566
Abkhazian
7082
French
7679
Laothian
8376
Slovenian
6570
Afrikaans
7089
Frisian
7684
Lithuanian
8377
Samoan
6577
Ameharic
7165
Irish, Scots
7686
Latvian, Lettish
8378
Shona
6582
Arabic
7168
Gaelic
7771
Malagasy
8379
Somali
6583
Assamese
7176
Galician
7773
Maori
8381
Albanian
6588
Aymara
7178
Guarani
7775
Macedonish
8382
Serbian
6590
Azerbaijani
7185
Gujarati
7776
Malayalam
8385
Sundanese
6665
Bashkir
7265
Hausa
7778
Mongolian
8386
Swedish
6669
Byelorussian
7273
Hindi
7779
Moldavian
8387
Swahili
6671
Bulgarian
7282
Croatian
7782
Marathi
8465
Tamil
6672
Bihari
7285
Hungarian
7783
Malay
8469
Telugu
6678
Bengali; Bangla
7289
Armenian
7784
Maltese
8471
Tajik
6679
Tibetan
7365
Interlingua
7789
Burmese
8472
Thai
6682
Breton
7378
Indonesian
7865
Nauru
8473
Tigrinya
6765
Catalan
7383
Icelandic
7869
Nepali
8475
Turkmen
6779
Corsican
7384
Italian
7876
Dutch
8476
Tagalog
6783
Czech
7387
Hebrew
7879
Norwegian
8479
Tonga
6789
Welsh
7465
Japanese
7982
Oriya
8482
Turkish
6865
Danish
7473
Yiddish
8065
Panjabi
8484
Tatar
6869
German
7487
Javanese
8076
Polish
8487
Twi
6890
Bhutani
7565
Georgian
8083
Pashto, Pushto
8575
Ukrainian
6976
Greek
7575
Kazakh
8084
Portuguese
8582
Urdu
6978
English
7576
Greenlandic
8185
Quechua
8590
Uzbek
6979
Esperanto
7577
Cambodian
8277
Rhaeto-Romance
8673
Vietnamese
6983
Spanish
7578
Kannada
8279
Romanian
8679
Volapük
6984
Estonian
7579
Korean
8285
Russian
8779
Wolof
6985
Basque
7583
Kashmiri
8365
Sanskrit
8872
Xhosa
7065
Persian
7585
Kurdish
8368
Sindhi
8979
Yoruba
7073
Finnish
7589
Kirghiz
8372
Serbo-Croatian
9072
Chinese
7074
Fiji
7665
Latin
8373
Singhalese
9085
Zulu
94 From Disc-Player.com Denon Manuals
Downloaded
ENGLISH
(2) When “OSD SETUP” is selected
1
2
3
If you are not at the DVD setting screen, read steps 1 and 2 on page
91.
Use the 0 and 1 cursor buttons to select the “OSD
SETUP” tag icon, then press the ENTER button.
• WALL PAPER
The image displayed when in the stop mode or when
playing a CD can be selected.
Remote control unit
d
ENTER
Remote control unit
4
Use the • and ª cursor buttons to select the setting to be
set, then press the ENTER button.
2 When “WALL PAPER” has been selected
• Use the • and ª cursor buttons to select the wallpaper.
• BLUE (Factory default)
The wallpaper is set to blue.
• GRAY
The wallpaper is set to gray.
• BLACK
The wallpaper is set to black.
• PICTURE
The wallpaper is set to a picture.
To complete the “WALL PAPER” setting
Press the ENTER button.
Downloaded From Disc-Player.com Denon Manuals
Remote control unit
d
ENTER
Remote control unit
95
ENGLISH
(3) “VIDEO SETUP” is selected
1
See page 91.
2
3
Use the 0 and 1 cursor buttons to select the “VIDEO
SETUP”, then press the ENTER button.
• TV ASPECT
Use this to set the shape of your TV’s screen.
• TV TYPE
Use this to set your TV’s video format (NTSC, PAL or
MULTI).
• VIDEO MODE
Use this to select the video mode. (AUTO, FILM, VIDEO)
• BLACK LEVEL
The picture’s black level can be set to “lighter” or
“darker”.
To exit the video setup mode
Use the • and ª cursor buttons to select “> NEXT DVD
MENU”, then press the ENTER button.
4
Use the • and ª cursor buttons to select the desired
setting, then press the ENTER button.
2 When “TV ASPECT” is selected:
• 4:3 PS (Factory default)
Select this to play wide DVDs in the pan & scan mode
(with the sides of the picture cut off). Discs for which pan
& scan is not specified are played in the letter box mode.
• 4:3 LB
Select this to play wide DVDs in the letter box mode (with
black strips at the top and bottom).
• WIDE (16:9)
Select this to play wide DVDs in the full-screen mode.
To exit the TV aspect mode
Press the ENTER button, you can go back to the previous
screen.
96 From Disc-Player.com Denon Manuals
Downloaded
Remote control unit
d
ENTER
Remote control unit
Remote control unit
d
ENTER
Remote control unit
ENGLISH
4
2 When “TV TYPE” is selected:
• NTSC (Factory default)
Select this when your TV’s video format is NTSC.
If NTSC is selected, output format is fixed to NTSC.
• PAL
Select this when your TV’s video format is PAL.
If PAL is selected, output format is fixed to PAL.
• MULTI
Select this when your TV is compatible with both the
NTSC and PAL formats.
NTSC signals are output from the video output jacks
when discs recorded in NTSC format are played, and PAL
signals are output from the video output jacks when discs
recorded in PAL format are played.
To exit the TV type mode
Press the ENTER button, you can go back to the previous
screen.
2 When “VIDEO MODE” has been selected (see the
note below)
• Use the • and ª cursor buttons to select the video mode
to be set.
• AUTO (Factory default)
The mode is selected by identifying the type of material
(film or video flag) from the disc.
• FILM
This setting is suited for playing film material discs or
video material discs recorded with progressive scanning.
• VIDEO
This setting is suited for playing video material discs.
To complete the “VIDEO MODE” setting
Press the ENTER button.
2 When “BLACK LEVEL” has been selected
• Use the • and ª cursor buttons to select the black level.
• DARKER
This sets the black level of the output signals to the
standard level.
• LIGHTER (Factory default)
This raises the standard level for the black level. Set this
if the picture displayed on the TV is extremely dark.
Remote control unit
d
ENTER
Remote control unit
Remote control unit
d
ENTER
Remote control unit
Remote control unit
d
To complete the “BLACK LEVEL” setting
Press the ENTER button.
ENTER
Remote control unit
NOTE:
• For the component output only, it is possible to switch between interlace image output and progressive image output. It is not possible to
specify progressive image output for the Video output connectors or S-Video output connector.
2 Note on when “VIDEO MODE” is selected
• Some discs may not be identified properly (for example discs including both film and video materials). For such discs, try changing the video
mode setting.
• When certain DVD video discs are played, noise in the form of stripes may appear or the picture may be blurred. In such cases, try changing
the video mode setting.
Downloaded From Disc-Player.com Denon Manuals
97
ENGLISH
(4) “AUDIO SETUP” is selected
1
See page 91.
2
3
Use the 0 and 1 cursor buttons to select the “AUDIO
SETUP”, then press the ENTER button.
• DIGITAL OUT
Use this to select the digital output’s signal format.
• LPCM (44.1 kHz / 48 kHz)
Use this to set the digital audio output when playing
DVDs recorded in linear PCM audio.
Remote control unit
To exit the audio setup mode
Use the • and ª cursor buttons to select “> NEXT DVD
MENU”, then press the ENTER button.
• The screen returns to as it was in step 2.
d
ENTER
Remote control unit
4
Use the • and ª cursor buttons to select the desired
setting, then press the ENTER button.
2 When “DIGITAL OUT” is selected.
• NORMAL (Factory default)
Make the selection when playing back in surround
playback a DVD that has been recorded with Dolby Digital
or DTS on this unit.
The Dolby Digital or DTS digital signal is also output from
the digital output jacks.
• PCM
DVDs that were recorded in Dolby Digital DTS are
converted to linear PCM 48 kHz/16 bit (2 channels). Make
the selection when making a digital recording.
To exit the digital out mode
Press the ENTER button, you can go back to the previous
screen.
98 From Disc-Player.com Denon Manuals
Downloaded
Remote control unit
d
ENTER
Remote control unit
ENGLISH
4
2 “LPCM SELECT (96 kHz / 48 kHz)” is selected.
• OFF (Factory default)
Make the selection when playing back to a decoder DVDs
that were recorded with this unit using linear PCM 48
kHz/20/24 bit and 96 kHz modes. Note that DVDs with
Copyright Protection are converted to 48 kHz/16 bits and
played back.
The same signal is output from the digital output jacks.
• ON
DVDs that were recorded with linear PCM 48 kHz/20/24
bit and 96 kHz modes are all converted to 48 kHz/16 bits.
Make this selection at the time of digital recording.
To exit the LPCM select mode
Press the ENTER button, you can go back to the previous
screen.
Remote control unit
d
ENTER
Remote control unit
NOTES:
• When playing Dolby Digital/DTS surround DVDs or 96 kHz linear PCM DVDs on the ADV-M71, be sure to set “Digital Output” to “Normal”
and “LPCM Conversion Mode” to “Do Not Convert”.
• When and only when you want to output the signals of the Dolby Digital/DTS surround DVD being played on the ADV-M71 to a digital
PCM device, set “Digital Output” to “PCM Conversion”.
With this setting, DVDs cannot be played on the ADV-M71 in the Dolby Digital/DTS surround mode. (The surround mode is set to the
mode in which PCM 2-channel signals can be played.)
• When and only when you want to make a digital recording of the signals of a 48 kHz/20-bit/24-bit or 96 kHz linear PCM DVD being played
on the ADV-M71 onto a digital recorder, set the “LPCM Conversion” to “Convert”.
With this setting it is not possible to decode and play 48 kHz/20-bit/24-bit or 96 kHz linear PCM signals on the ADV-M71 during recording.
(Decoding and playback is in 48 kHz/16-bit linear PCM format.)
Downloaded From Disc-Player.com Denon Manuals
99
ENGLISH
(5) “RATINGS” is selected
1
2
3
See page 91.
Use the 0 and 1 cursor buttons to select the “RATINGS”,
then press the ENTER button.
• RATING LEVEL
Use this to restrict playback of adult DVDs you do not
want children to view. Note that even with adult DVDs,
viewing cannot be restricted unless the restriction level is
recorded on the disc.
It is however possible to disable playback of all DVDs.
• PASSWORD
Use this to change the password.
The set’s password is set to “0000” by default.
Remote control unit
d
ENTER
To exit the rating setup mode
Use the • and ª cursor buttons to select “> NEXT DVD
MENU”, then press the ENTER button.
Remote control unit
4
Use the • and ª cursor buttons to select the desired
setting, then press the ENTER button.
2 When “RATING LEVEL” is selected.
• Level 0 (LOCK ALL)
Select this to disable playback of all DVDs.
Use this for example to disable playback of adult DVDs on
which the rating level is not recorded.
• Level 1
Select this to play only DVDs for children. (Adult and
general audience DVDs cannot be played.)
• Level 2 to Level 7
Select this to play DVDs for general audiences and
children. Adult DVDs cannot be played.
• NO LIMIT (Factory default)
Select this to play all DVDs.
100From Disc-Player.com Denon Manuals
Downloaded
Remote control unit
d
ENTER
Remote control unit
ENGLISH
4
Use the number buttons to input a 4-digit password,
then press the ENTER button.
Be sure to set the DVD mode using the remote
control mode selector buttons.
The set's password is set to “0000" by default.
Do not forget the password.
The setting cannot be changed without inputting
the correct password.
When the password has been forgotten or when a
RATING LEVEL setting change is suspended, press
the ENTER button several times and terminate the
rating setup mode.
DVD
TUNER
D.AUX
1
2
3
MD/LINE-1
TAPE /LINE-2
4
7
5
6
5CH STEREO
AUTO DECODE
8
9
STEREO
VIRTUAL
0/10
+10
Remote control unit
d
ENTER
Remote control unit
2 When “PASSWORD CHANGE” is selected.
Use the number buttons to input a 4-digit
password, then press the ENTER button.
Be sure to set the DVD mode using the remote
control mode selector buttons.
Do not forget the password.
The setting cannot be changed without
inputting the correct password.
The set’s password is set to “0000” by default.
DVD
TUNER
D.AUX
1
2
3
MD/LINE-1
TAPE /LINE-2
4
7
5
6
5CH STEREO
AUTO DECODE
8
9
STEREO
VIRTUAL
0/10
+10
Remote control unit
Downloaded From Disc-Player.com Denon Manuals
101
ENGLISH
(6) “OTHER SETUP” is selected
NOTES:
• An English caption decoder is required to display English captions.
• DVDs with caption signals are indicated by the
,
,
, mark.
English captions cannot be displayed when playing DVDs which do not contain caption signals.
• The characters in which the captions are displayed (capital letters, small letters, italics, etc.) depend on the DVD and cannot be selected with
this unit.
1
2
3
See page 91.
Use the 0 and 1 cursor buttons to select the “OTHER
SETUP”, then press the ENTER button.
• CAPTIONS
Set whether or not to display the closed captions
(subtitles) recorded on the DVD. (A caption decoder
(commercially available) is required to display captions.)
• SLIDE SHOW
Set the time interval for switching to the next still image
(in JPEG format) when playing slides.
To exit the other setup mode
Use the • and ª cursor buttons to select “> NEXT DVD
Remote control unit
d
ENTER
MENU”, then press the ENTER button.
Remote control unit
4
Use the • and ª cursor buttons to select the desired
setting, then press the ENTER button.
2 When “CAPTIONS” is selected:
• OFF (Factory default)
Select this when you do not want to display the captions
on the screen when playing DVDs containing English
captions.
• ON
Select this to display the captions on the screen when
playing DVDs containing English captions.
Remote control unit
d
ENTER
To exit the captions mode
Press the ENTER button, you can go back to the previous
screen.
102From Disc-Player.com Denon Manuals
Downloaded
Remote control unit
ENGLISH
4
2 When “SLIDE SHOW” has been selected
• Use the • and ª cursor buttons to set the time.
• The interval can be set from 5 to 15 seconds in steps
of 1 second.
(Factory default: 5 seconds)
Remote control unit
d
ENTER
Remote control unit
Downloaded From Disc-Player.com Denon Manuals
103
ENGLISH
20 SYSTEM FUNCTIONS
2 Making system connections between the ADV-M71 and the D-M31 series cassette deck (DRR-M31) makes operation even easier. (For
instructions on connections, refer to “Connecting to D-M31 Series System Components” on pages 8 to 9.)
2 System functions will not work properly if the input/output function settings are not right for the connected components. Be sure to set the
input/output functions for the components being used. (See page 37.) The setting contents are maintained until they are next changed even
when the power is switched off.
(1) Auto power on function
• When the play/pause button on the main unit ( 1/3 ) or the DVD play button on the remote control unit ( 1 ) is pressed while the power is in
the standby mode, the ADV-M71’s power turns on automatically, and if a disc is loaded in the ADV-M71 the disc is played.
1
1
B
SURROUND / SELECT
DVD SURROUND RECEIVER ADV-M71
PUSH - PARAM.
-
+
BAND
MENU / SET
VIRTUAL SPEAKER
TONE / SDB
When the ADV-M71 is in the standby mode, the power can be
turned on simply by pressing the play/pause button on the
main unit or the DVD play button on the remote control unit.
If a disc is loaded, playback starts.
VOLUME
1
FUNCTION
ON / STANDBY
DVD
PHONES
Main unit
The auto power on function also turns the
power on when the disc holder is opened
while the ADV-M71 is in the standby mode.
CH
DIRECT
STEREO
VIRTUAL
CALL
0/10
+10
-
TEST TONE
INPUT MODE
SURROUND
FUNCTION
Remote control unit
TUNER TV / VCR
DVD
IN/SURR.
A/V
SYSTEM
IN/SURR.
MD
CDR TAPE
1
1
2
+
DVD
8
Main unit
9
6
-
7
• To listen to a radio program, simply press
one of the tuner preset buttons (“+” or “–”)
on the remote control unit. The power turns
on and a station is tuned in.
• The power on function works in the same
way when system connections are made
with the D-M31 series cassette deck (DRRM31). For details, refer to the respective
component’s operating instructions.
STATUS
3
MUTING
SETUP
TONE /SDB
ENTER
TUNER
+
CH
Remote control unit
(2) Auto function selection
• At the touch of a button, the function switches automatically to
“DVD” and disc playback begins.
1
B
SURROUND / SELECT
DVD SURROUND RECEIVER ADV-M71
PUSH - PARAM.
1
Press the play/pause button on the ADV-M71 or the DVD play
button on the remote control unit while a component than
the DRR-M31 (cassette deck) is playing.
• Playback on the
other component
stops, the ADV1
M71’s function
switches to
“DVD” and if a
disc is loaded
Main unit
Remote control unit
playback of the
disc starts.
DVD
-
+
BAND
MENU / SET
VIRTUAL SPEAKER
TONE / SDB
FUNCTION
ON / STANDBY
PHONES
VOLUME
• To listen to a radio program, simply press
one of the tuner preset buttons (“+” or “–”)
+
on the remote control unit.
• Auto function selection works in the same
way when system connections are made
with the D-M31 series cassette deck (DRRM31). For details, refer to the respective
Remote control unit
component’s operating instructions.
• Auto function selection does not work for components connected
using the AUX or D.AUX input/output terminals.
TUNER
DIRECT
STEREO
CH
VIRTUAL
CALL
0/10
+10
-
TEST TONE
INPUT MODE
SURROUND
FUNCTION
TUNER TV / VCR
DVD
IN/SURR.
A/V
SYSTEM
IN/SURR.
MD
CDR TAPE
1
1
2
+
DVD
8
6
9
7
-
STATUS
3
SETUP
104From Disc-Player.com Denon Manuals
Downloaded
MUTING
TONE /SDB
CH
ENGLISH
(3) CD Æ TAPE recording (when the ADV-M71 and DRR-M31 are connected with a system cord)
• CDs can easily be recorded onto cassette tapes.
OFF
Main unit (ADV-M71)
Cassette deck (DRR-M31)
B
CLEAR
3,e
3,e
7
5,t
5,t
PROG/DIRECT
PLAY
TONE / SDB
BAND
REPEAT
BAND
D.AUX
1
2
3
MD/LINE-1
TAPE /LINE-2
ON / STANDBY
CD SRS
SEARCH MODE
TUNING /
TV VOL
5
6
+
-
AUTO DECODE
TUNER
+
9
STEREO
CH
VIRTUAL
CALL
0/10
+10
-
TEST TONE
INPUT MODE
SURROUND
FUNCTION
REC
FUNCTION
ON / STANDBY
+
5CH STEREO
8
DIRECT
ON
OFF
TIME
TV CH
RANDOM
MEMO
TUNER
CD SRS
DOLBY NR
VOLUME
T V
EDIT/MENU
ZOOM
-
DVD
7
+
MENU/SET
VIRTUAL SPEAKER
TITLE
TV IN
CHARAC.
SLIDE MODE
MODE
4
PUSH - PARAM.
1 ,q
ON
VCR
REC
NTSC/PAL
ENTER
A-B REPEAT
TV CH
CASSETTE DECK DRR-M31
SURROUND / SELECT
DVD SURROUND RECEIVER ADV-M71
SLEEP
SOURCE
CD SRS
REC
0 PLAY
2 ,w
1
REVERSE
MODE
PHONES
TUNER TV / VCR
DVD
IN/SURR.
A/V
SYSTEM
IN/SURR.
MD
CDR TAPE
7
1
2
+
DVD
1,q
6
2,w
y
8
9
6
7
STATUS
3
Turn on the ADV-M71’s power.
ON / STANDBY
• The system’s
power turns on.
ADV-M71
2
q
~
t
ON
Perform the same operations as for steps 1 to 5 above.
Remote control unit
Press the FUNCTION button and switch the function to
“DVD”.
FUNCTION
MUTING
[2] Synchronized CD recording
[1] Synchronized recording function
1
-
FUNCTION
y
Press the CD synchronized recording
button on the cassette deck.
• Recording of the CD starts
automatically.
CD SRS
DRR-M31
ADV-M71
3
Remote control unit
Open the ADV-M71’s disc holder, load
the CD, then close the disc holder.
ADV-M71
4
Check that the total number of tracks and total playing time
on the CD appear on the display.
Example: For a CD with a total of 16 tracks and a total playing
time of 53 minutes, 20 seconds
16Tr
5
53:20
Once all the tracks on the CD have been played, both the ADVM71 and cassette deck are automatically set to the stop mode.
Even if the entire CD has not yet been played, both the ADV-M71
and cassette deck are automatically set to the stop mode once the
cassette tape is full.
To stop synchronized recording, press the stop button ( 2 ) on the
ADV-M71 or the cassette deck.
NOTES:
• Synchronized recording does not work when the ADV-M71 is
set to a function other than DVD.
• Synchronized recording does not work when in the programmed
play mode. When in the random play or repeat play mode, the
respective mode is canceled when synchronized recording
starts.
Open the cassette holder, load the
cassette tape onto which you want to
record, then close the cassette holder.
DRR-M31
6
Press the recording button on the
cassette deck once to set the
recording standby mode.
REC
DRR-M31
7
Press the play/pause button on the ADV-M71 or the play
button on the remote control unit.
• Recording of the
1
CD starts
automatically.
DVD
ADV-M71
Remote control unit
The recording standby mode is set once playback of the CD ends.
Downloaded From Disc-Player.com Denon Manuals
105
ENGLISH
(4) Edited recording (when the ADV-M71 and DRR-M31 are connected with a system cord)
• The tracks on the CD can be automatically divided into sides A and B for recording according to the length of the cassette tape (tape time). (For
CDs only)
• Edited recording is possible for CDs containing up to 25 tracks. For CDs with 26 tracks or more, editing is not possible.
Example: Recording a CD with 16 tracks and a total playing time of 56
minutes onto a C-60 (60-minute) cassette tape
4
Main unit ADV-M71
4 6
4
Open the ADV-M71’s disc holder, load the CD, then close the
disc holder.
16Tr
B
56:00
SURROUND / SELECT
DVD SURROUND RECEIVER ADV-M71
PUSH - PARAM.
-
+
BAND
MENU/SET
VIRTUAL SPEAKER
TONE / SDB
VOLUME
ADV-M71
FUNCTION
ON / STANDBY
PHONES
5
3
1
Cassette deck (DRR-M31)
2
2
CASSETTE DECK DRR-M31
PLAY
Press the MENU button on the
remote control unit and set the length
of the cassette tape onto which you
are going to record.
• For example, for a 60-minute
cassette tape, press the edit button
twice. (The length of the cassette
tape is the total time for sides A and
B.)
MENU
Remote control unit
CD SRS
DOLBY NR
ON
OFF
ON / STANDBY
TapeEdit C-60
REC
CD SRS
REC
0 PLAY
1
REVERSE
MODE
OFF
1
ON
VCR
REC
NTSC/PAL
TITLE
TV IN
T V
CLEAR
ENTER
A-B REPEAT
CHARAC.
SLIDE MODE
EDIT/MENU
ZOOM
PROG/DIRECT
REPEAT
RANDOM
SLEEP
SOURCE
TV CH
MEMO
BAND
DVD
TUNER
D.AUX
1
2
3
MD/LINE-1
TAPE /LINE-2
4
TIME
-
MODE
TV CH
+
CD SRS
SEARCH MODE
5
6
5CH STEREO
AUTO DECODE
TUNER
9
+
7
8
STEREO
VIRTUAL
Edited recording
canceled
TUNING /
TV VOL
+
-
DIRECT
CALL
0/10
+10
-
INPUT MODE
SURROUND
FUNCTION
TUNER TV / VCR
DVD
IN/SURR.
SYSTEM
About 4 seconds after setting the length of the cassette
tape, the numbers of the tracks to be recorded on side A
and the remaining time for side A on the cassette tape are
displayed.
(Ex.: When tracks 1 to 9 will be recorded on side A and the
remaining time for side A is 2 minutes 40 seconds)
CH
TEST TONE
A/V
The display switches as follows each time the MENU
button is pressed.
3
IN/SURR.
MD
CDR TAPE
6
1
2
+
DVD
8
6
E
9
7
-
01-09A02:40
STATUS
1
After this, the display switches every few seconds
between the numbers of the tracks and remaining time for
side B and the numbers of the tracks and remaining time
for side A.
(Ex.: When tracks 10 to 16 will be recorded on side B and
the remaining time for side B is 1 minute 20 seconds)
Turn on the ADV-M71’s power.
• The system’s power turns on.
ON / STANDBY
ON
E
ADV-M71
2
3
Open the cassette holder, load the
cassette tape onto which you want to
record, then close the cassette holder.
Load the cassette tape with side A
facing up.
Remote control unit
DRR-M31
Press the FUNCTION button and switch the function to
“DVD”.
FUNCTION
10-16B01:20
If “OVER” is displayed for the remaining time, it is not
possible to record all the tracks. Change the cassette tape
length.
To set the cassette tape length to anything other than 46,
60 or 90, use the numeric keypad and +10 button on the
remote control unit while “
” is displayed to input the
time. The time can be set to up to 99 minutes. The time is
input in the same way as when searching for CD tracks
directly.
FUNCTION
[Example:] To set the time to 54 minutes
While “
ADV-M71
106From Disc-Player.com Denon Manuals
Downloaded
Remote control unit
+10 , 4.
” is displayed, press +10 , +10 , +10 , +10 ,
ENGLISH
6
Press the play/pause button on the
ADV-M71 or the DVD play button on
the remote control unit.
• Playback of the CD and recording
onto the cassette tape start
simultaneously.
01Tr
ADV-M71
00:01
1
DVD
Remote control unit
To quit the edited
recording function, press
the ADV-M71’s stop
button.
BAND
2
ADV-M71
Remote control unit
NOTES:
• The edited recording function cannot be used with CDs containing 26 tracks or more.
• Load the cassette tape onto which you want to record into the cassette deck’s cassette tray with side A facing up before performing the
edited recording procedure. The tape is automatically wound to the beginning of the recordable section before recording starts.
• When using an already recorded cassette tape for edited recording, if the tape is longer than the set time, recording stops in the middle
of side B and the previous recording remains on the rest of the tape. Because of this, erase the cassette tape before using it.
• If the cassette deck’s reverse mode is set to
cassette deck’s reverse mode to
when using the edited recording function, recording will stop after side A. Set the
.
• Because the tracks are divided into sides A and B, it may not be possible to record all the tracks from the CD onto the cassette tape,
even if the tape is slightly longer than the CD’s total playing time.
• The 9, 8, 7 and 6 buttons do not work during edited recording.
2 About synchronized recording onto the cassette deck (DRR-M31)
• Synchronized recording is possible with discs other than CDs (DVDs, video CDs, discs containing MP3 or WMA files, etc.).
• For digital and analog recoding during disc playback, see page 14.
• The synchronized recording function may not work properly for some discs. If so, record the disc manually by setting the recording mode
after start playback of the disc.
• The CD SRS function and the function for edited recording onto tapes only works with CDs.
Downloaded From Disc-Player.com Denon Manuals
107
ENGLISH
21 LAST FUNCTION MEMORY
• This unit is equipped with a last function memory which stores the input and output setting conditions as they were immediately before the
power is switched off.
This function eliminates the need to perform complicated resettings when the power is switched on.
• The unit is also equipped with a back-up memory. This function provides memory storage when the power switch is off and with the power
cord disconnected.
22 INITIALIZATION OF THE MICROPROCESSOR
When the indication of the display is not normal or when the operation of the unit does not shows the reasonable result, the initialization of the
microprocessor is required by the following procedure.
1
Press the power button to set the
standby mode, then unplug the set’s
power cord from the wall power outlet.
2 2
ON / STANDBY
Red
B
SURROUND / SELECT
DVD SURROUND RECEIVER ADV-M71
PUSH - PARAM.
-
+
BAND
MENU / SET
VIRTUAL SPEAKER
TONE / SDB
VOLUME
FUNCTION
ON / STANDBY
PHONES
2
Hold the following PLAY/PAUSE (1/3) button and STOP (2)
button after 30 second, and plug the AC cord into the outlet.
3
Check that the entire display is flashing with an interval of
about 1 second, and release your fingers from the 2 buttons
and the microprocessor will be initialized.
1
108From Disc-Player.com Denon Manuals
Downloaded
NOTES:
• If step 3 does not work, start over from step 1.
• If the microprocessor is reset, all the buttons and the setup
settings are reset to the factory default values.
ENGLISH
23 TROUBLESHOOTING
Check again before assuming the player is malfunctioning
2 Are all the connections correct ?
2 Are you following the instructions in the manual ?
2 Are the speakers and other components operating properly ?
If this unit does not seem to be functioning properly, check the table below. If this does not solve the problem, this unit may be damaged. Turn
off the power, unplug the power cord from the power outlet, and contact your store of purchase or nearest Denon sales office.
Remote control unit
Common problems when listening to the discs, tapes and FM broadcasts, etc.
Symptom
Measures
Page
• Power cord not plugged in securely.
• Check the insertion of the power cord plug.
8
• Connect securely.
• Set to a suitable position.
8
43
DISPLAY lit but sound not produced.
• Speaker cords not securely connected.
• Improper position of the audio function
button.
• Volume control set to minimum.
• MUTING is on.
• Digital signals not input Digital input
selected.
• Turn volume up to suitable level.
• Switch off MUTING.
• Input digital signals or select input jacks to
which digital signals are being input.
41
45
46
• Check whether the connections are correct.
11
Monitor doesn't display an image.
• Connections between the video output jack
of this unit and the input connector of the
monitor are incomplete.
• The input setting of the monitor TV is
different.
• When “PROGRESSIVE” is set, no video
signals are output from the VIDEO OUT or
S-VIDEO OUT terminals.
• Set the input switching of the TV to the jack
to which the video input is connected.
• Set “INTERLACED” if you want to use the
VIDEO OUT or S-VIDEO OUT signals.
—
The program cannot be copied from DVD
to the VCR.
• Almost all movie software contains a copy
prevention signal.
• A copy cannot be made.
—
• Switch on the power of the subwoofer.
—
The subwoofer does not produce sound.
• Power is not being supplied to the
subwoofer.
• The subwoofer setting is made to "No" in
the setup.
• The output of the subwoofer has not been
connected.
• Change the setting to “Subwoofer” in the
setup.
• Make the proper connections.
29
• Batteries dead.
• Remote control unit too far from this unit.
• Obstacle between this unit and remote
control unit.
• Different button is being pressed.
• < and > ends of battery inserted in reverse.
• The mode selection of the remote control is
not properly selected. The DVD mode, AV
mode, or audio mode is not properly
selected.
• Replace with new batteries.
• Move closer.
• Remove obstacle.
21
21
21
• Press the proper button.
• Insert batteries properly.
• Press the remote control mode selection
button for the item you wish to operate. To
operate this unit, use with the DVD mode.
17
21
22
DISPLAY not lit and sound not produced
when power switch set to on.
This unit does not operate properly when
remote control unit is used.
Downloaded From Disc-Player.com Denon Manuals
Cause
39
8
109
ENGLISH
DVD operation
Symptom
Page
Playback does not start when PLAY
button is pressed.
Playback stops immediately.
• Is there condensation on the disc or player ? (Let stand for 1 or 2 hours.)
• Discs other than DVDs, video CDs and music CDs cannot be played.
• Disc is dirty. Wipe off the dirt.
—
6
7
Menu playback of video CD’s is not
possible.
• Menu playback is not possible with anything but video CDs with playback control.
—
Picture is disturbed during the search
operation.
• Some disturbance is normal.
—
Buttons do not operate.
• Some operations are disabled for some discs.
41
No subtitles are displayed.
• Subtitles are not displayed for DVDs not containing subtitles.
• Subtitles are turned off. Turn the subtitles setting on.
• The audio (or subtitle) language does not switch for discs which do not include multiple audio
(or subtitle) languages.
• For some discs the audio (or subtitle) language cannot be switched when the operation to
switch it is performed, but can be switched on the menu screens.
92
Audio (or subtitle) language does not
switch.
Angle does not switch.
• The angle cannot be switched for DVDs which do not contain multiple angles. In some cases
multiple angles are only recorded for specific scenes.
80
Playback does not start when the title is
selected.
—
92, 93
92
• Check the “RATINGS SETUP” setting.
100, 101
• While the player is in the stop mode, hold the FUNCTION button and the MENU/SET button
down simultaneously for longer than 3 seconds (until “INITIALIZE” disappears from the TV
monitor).
The lock will be released and the DVD all default settings and picture settings will return to the
default values.
100, 101
The disc is not played with the audio or
subtitle language set as the default
setting.
• The disc does not play with the selected audio or subtitle language if that audio or subtitle
language is not included on that DVD.
92
Picture is not displayed in 4:3 (or 16:9).
• Set the “TV ASPECT” default setting to the proper setting for the connected TV.
96
Menu screen messages for the desired
language do not display.
• Check the default setting for the disc language’s menu language.
Continuous noise is heard when receiving
FM programs
• Antenna cable is not properly connected.
• Connect the antenna cable properly.
• Connect an outdoor antenna.
12
• This may be noise from a TV or interference
from a radio station.
• Turn off the TV.
• Change the position and direction of the AM
loop antenna.
12
• The radio waves transmitted over the
power cord are being modulated.
• Unplug the power cord, flip the plug over in
the opposite direction, then plug the cord
back in.
12
The password for rating level has been
forgotten.
Reset all the DVD setting to Factory
Preset.
Tuner
Check
Hissing or continuous noise is heard when
receiving AM programs
Humming noise is heard when receiving
AM programs
110From Disc-Player.com Denon Manuals
Downloaded
93, 94
ENGLISH
24 SPECIFICATIONS
2
2
2
Audio Section
• Power Amplifier Section
Rated output:
Practical maximum output:
Output terminals:
• Analog Section
Input sensitivity/Input impedance:
Frequency response:
Signal-to-noise ratio:
Rated output:
Tuner Section
Reception frequency range:
Receiving sensitivity:
FM stereo separation:
• Digital Section
Digital input/output:
Video Section
• Standard Video Jack
Output level/impedance:
• S-video Connector
Output level/impedance:
• Color Difference (Component)
Video Connector:
Output level/impedance:
2
2
2
2
2
DVD Section
Signal Format:
Supported Discs:
200 mV/47 kΩ/kohms
10 Hz to 50 kHz: +0, –3 dB (2 Channel setting, direct mode)
98 dB (Direct mode)
0.6 V (Preamplifier output)
FM: 87.5 MHz to 107.9 MHz AM: 520 kHz to 1710 kHz
FM: 1.5 µV/75 Ω/ohms
AM: 20 µV
35 dB (1 kHz)
Format — Digital audio interface
1 Vp-p/75 Ω/ohms
Y (Brightness) signal — 1 Vp-p/ 75 Ω/ohms
C (Color) signal — 0.286 Vp-p/75 Ω/ohms
Y (Brightness) signal — 1 Vp-p/75 Ω/ohms
CB/PB (Blue) signal — 0.7 Vp-p/75 Ω/ohms
CR/PR (Red) signal — 0.7 Vp-p/75 Ω/ohms
NTSC/PAL
(1) DVD-VIDEO discs
12 cm single side 1 layer, 12 cm single side 2 layers,
12 cm both sides 2 layers (single side 1 layer),
8 cm single side 1 layer, 8 cm single side 2 layers,
8 cm both sides 2 layers (single side 1 layer)
(2) CompactDisc (CD-DA, VIDEO CD)
12 cm discs, 8 cm discs
Output level: 1.2 Vrms (LINE-1, LINE-2 OUT)
Analog Audio Output:
Clock/Timer Section
Clock method:
Timer:
Power line frequency synchronized method
Everyday/Once timer: One system each
Sleep timer: 120 minutes, maximum
General
Power supply:
Power consumption:
Maximum external dimensions:
Weight:
Remote Control Unit
Remote control method:
Power supply:
Speakers SC-U71 [D-M71 DVS only]
Type:
Front:
20 W + 20 W (8 Ω/ohm load, 20 Hz to 20 kHz, T.H.D. 0.08%)
Front:
35 W + 35 W (6 Ω/ohm load, 1 kHz) *(EIAJ)
Speaker impedance: 6 to 16 Ω/ohms
120 V AC, 60 Hz
75 W
(At standby: Approximately 0.7 W)
210 (W) x 95 (H) x 367 (D) mm (including feet, knobs, and connectors)
3.5 kg
RC-936
IR pulse method
3 V DC, using two AA batteries
2-way, 2-speakers
Low-leakage-flux
Speakers:
Input impedance:
12 cm cone bass-mid x 1
2.5 cm dome high range x 1
6 Ω/ohms
Max. input:
Frequency range:
Sensitivity:
Dimensions:
Mass:
80 watts (IEC)
55 Hz ~ 30 kHz
88 dB (1m . 1watt)
162(W) x 270(H) x 240(D)mm
3.4 kg (one unit)
✽ For improvement purposes, specifications and design are subject to change without notice.
* (EIAJ) : Standards established by the Japan Electronics and Information Technology Industries Association (JEITA).
Downloaded From Disc-Player.com Denon Manuals
111
16-11, YUSHIMA 3-CHOME, BUNKYO-KU, TOKYO 113-0034, JAPAN
Telephone: (03) 3837-5321
Printed in China 511 4048 005
Downloaded From Disc-Player.com Denon Manuals