STARLINE SERIES | User manual | Motorola BLE 1 GHz Data Sheet

BLE100 1 GHz Line Extender

STARLINE

®

Series

The BLE100 two-way line

Motorola’s 1 GHz STARLINE ® Series Broadband Line Extender, model

BLE100*, leads the industry in features and performance and is designed to meet the needs of today's expanding broadband communication networks. This two-way capable single output amplifier offers high gain, high output levels, ergonomics, superior distortion performance, multiple diplex filter options, 16 dB return loss, and Bode equalization. The BLE100 also allows optional advanced features such as ingress control switching and status monitoring.

extender offers 1 GHz bandwidth capability, high gain, high output level, ergonomics, and superior distortion performance with the option to bench upgrade

ENHANCED GALLIUM ARSENIDE

to N-split (5-85/104-1003

The BLE100 uses Enhanced Gallium Arsenide (E-GaAs) hybrids. This second generation technology provides superior distortion performance in

MHz) in the future.

CTB and CSO over the standard GaAs technology. Compared to silicon and competing GaAs technology, E-GaAs distortion performance remains linear at significantly higher output levels. This higher output level allows the customer to maximize system performance and reduce system costs. We encourage our customers to contact their Motorola

Account Representative to determine the optimal levels for their systems.

HIGH GAIN

The BLE100 also offers high gain, which allows the operator to hold existing amplifier locations during system upgrades thereby reducing system costs such as maintenance, installation and powering.

BENEFITS INCLUDE:

• 1003 MHz Enhanced Gallium Arsenide (E-GaAs) power doubling technology

• High

• High output level

• Multiple diplex filter frequency split options

N-split

• Ease-of-use

• 16 dB return loss

• 60/90 V powering

• Meets Telcordia GR-1098-Core voltage surge requirements using surge waveforms as described in

IEEE C62.41

• FCC, CENELEC and CCC approved

• RoHS compliant models available Q1 2007

• Bode equalization (thermal or auto controlled)

• 15 Ampere AC capability

• Optional return path ingress control and status monitor

• Directional coupler –20 dB test points

Motorola, Inc.

101 Tournament Drive

Horsham, PA 19044 www.motorola.com/broadband

04.03.07

Rev 9

MOTOROLA, the Stylized M Logo, STARLINE, and LIFELINE are registered in the US Patent & Trademark Office.

All other product or service names are the property of their respective owners.

© Motorola, Inc. 2006. All rights reserved.

Specifications are subject to change without notice.

BACKWARD COMPATIBILITY

The reversible BLE100 electronics package can be made backward compatible with the STARLINE JLX and 10-Amp

BLE housing by installing the BLE-15A Kit. This kit contains 50 mil gold plated platform assemblies. This makes it possible for the amplifier to carry 15 Amperes continuous through the input or output ports. There is also a “low current”

(10A) option that can be ordered for the electronics module (no housing included), which is backward compatible with the

STARLINE JLX and 10-Amp BLE housing, without the use of a kit.

If an “electronics only” package is ordered, it will include the deeper housing cover to accommodate ergonomic accessories. Note: this is not the deeper housing cover associated with the status monitor. When ordering the status monitor option, a deep housing cover is also required.

FORWARD PATH

The operational gain of the BLE100 is 34 dB, with 16 dB return loss. Output level control is achieved through the use of an interstage Bode equalizer, which compensates for coaxial cable attenuation changes due to temperature.

Equalization may be controlled manually, with a thermal drive unit (TDU), or with a single pilot closed loop automatic drive unit, model ADU-* (analog pilot) or QADU-* (QAM pilot). Both the ADU and QADU boards are common to the

STARLINE family of amplifiers (with the exception of the SLE). ADUs utilize Surface Acoustic Wave (SAW) filters for determining pilot frequency. This improves amplifier stability over temperature.

To further ensure system flexibility, installation ease and maintenance, the amplifier is engineered for compatibility with standard accessories, such as attenuators, equalizers, ADUs or QADUs, return amplifiers, automotive fuses and FTEC crowbar circuits.

The BLE100 uses modular diplex filters, which can be changed for a different frequency split as required. The amplifier is available with S-split filters for a 5-40 MHz return and a 52-1003 MHz forward band. K-splits (5-42 MHz/54-1003 MHz),

J-splits (5-55 MHz/70-1003 MHz), and A-splits (5-65 MHz/85-1003 MHz) are also available. The N-split (5-85 MHz/104-

1003 MHz) option is currently in development. These same filters can be used for all US-style Motorola RF distribution amplifiers (models BLE, MB/MBE, BT).

RETURN PATH

High gain return amplifier kits can be ordered which provide 24 dB minimum station gain. Return path equalizers from 0 to 12 dB can be customer selected. Optional features include thermal compensation and ingress control switching.

Thermal compensation comes in the form of a plug-in JXP-TH*C, which stabilizes gain and match over temperature extremes.

Also available is Ingress Control Switching (ICS) in 3 states. This pin diode attenuator circuit can lower levels by 6 dB or by 38 dB with a controlled slew rate for minimum bit errors. The LIFELINE

Switch from a remote location.

®

Broadband Line Extender transponder

(available directly from AM Networks) and accompanying deeper housing lid are required to operate the Ingress Control

Model Availability

To reduce customer costs and to accommodate customer specific needs, the STARLINE BLE100 can be ordered in a variety of different models. Please refer to the BLE100 ordering information below for options.

Motorola, Inc.

101 Tournament Drive

Horsham, PA 19044 www.motorola.com/broadband

04.03.07

Rev 9

2

MOTOROLA, the Stylized M Logo, STARLINE, and LIFELINE are registered in the US Patent & Trademark Office.

All other product or service names are the property of their respective owners.

© Motorola, Inc. 2006. All rights reserved.

Specifications are subject to change without notice.

BLE100 Specifications

All specifications stated as worst-case over temperature unless otherwise noted.

STARLINE®

Enhanced Gallium Arsenide

1 GHz Broadband Line Extender

PARAMETER

Passband

Flatness

Minimum Full Gain

Operational Gain

Manual Bode Slope Control Range

Interstage Equalizer Slope

Noise Figure 40/52/870/1003 MHz

Reference Frequency

Output Level

Channel Loading

Compressed data loading

Distortion CTB

XM

CSO

Test Point (all)

Return Loss

Hum Modulation @ 12A

Hum Modulation @ 15A

DC Voltage

Current DC

DC Ripple

Power Consumption

AC Input Voltage Range

AC Current Draw

@90 VAC

@75 VAC

@60 VAC

@53 VAC

@45 VAC

@38 VAC

AC Bypass Current

Group Delay, Typical

55.25 to 58.83 MHz

61.25 to 64.83 MHz

67.25 to 70.83 MHz

77.25 to 80.83 MHz

5.0 to 6.5 MHz

10.0 to 11.5 MHz

33.5 to 35.0 MHz

38.5 to 40.0 MHz

Housing Dimensions

Weight

Ambient Operating Temperature

Motorola, Inc.

101 Tournament Drive

Horsham, PA 19044 www.motorola.com/broadband

04.03.07

Rev 9 nSec nSec nSec nSec nSec nSec nSec nSec

Single Output Line Extender

BLE100S SPECIFICATIONS

MHz dBmV

NTSC

MHz dBc dBc dBc dB dB dB dB dB dB dB dB dBc

UNITS NOTE

MHz 1

7

8

5

6

2

3

4

20

9,19,21

10,19

9,11, 19

13

14

14

VDC mA mV

W

VAC

A

A

14

15

16

17

17

18

FORWARD

52-1003

± 0.70

38

34

± 4.0

9 ± 1

NA / 8 / 8 / 8

1003 / 550 / 52

45 / 44 / 37

79

450

76

70

71

20 ± 1.0

16

70 (52 - 900 MHz)

65 (901 - 1003 MHz)

65 (52 - 900 MHz)

60 (901 - 1003 MHz)

+ 24.0 ± 0.25

800

15 P-P

22.6

38 - 90

Forward Only

0.48

0.50

0.56

0.60

0.67

0.75

15 (or 10 amp option)

RETURN

RA-KIT/H

5 - 40

± 0.50

NA

24

NA

NA

5.5 / NA / NA

35 flat

6

NA

80

70

81

20 ± 1.0

15

60 (5 - 10 MHz)

70 (11 - 40 MHz)

55 (5 - 10 MHz)

65 (11 - 40 MHz)

925

26.6

With Return

0.56

0.59

0.65

0.70

0.78

0.88

2

NA

NA

NA

NA

10.6" L x 8.0" W x 4.7" D

7.2 lbs

-40° to +140° F

32

9

5

NA

NA

NA

NA

45

10

12

35

26.9cm x 20.3cm x 11.9 cm

3.2 kg

-40° to +60° C

3

MOTOROLA, the Stylized M Logo, STARLINE, and LIFELINE are registered in the US Patent & Trademark Office.

All other product or service names are the property of their respective owners.

© Motorola, Inc. 2006. All rights reserved.

Specifications are subject to change without notice.

Specification Notes:

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

1. Operating passband of station. Diplex filters are plugged into the electronic chassis.

2. Referenced to the average gain across the stated passband.

3.

4.

5.

6.

7.

Minimum full gain at 1003 MHz includes loss of equalizer but Bode slope reserves have not been set. Return gain includes loss of SRE-*-4 return equalizer.

Operational gain includes loss of slope reserves as well as equalizer.

Amount of Bode slope control range from midpoint (typical setting is -4 dB at 1003 MHz @ 20°C). This control should not be used for gain reduction.

Amount of slope created and cable equivalence of fixed interstage equalizer. Interstage equalizer is a plug-in.

Noise Figure is specified at room temperature at the cable entry facility of the housing and includes the loss of 1 dB for the pre-stage equalizer. The return Noise Figure includes the station loss preceding the RF hybrid. The noise figure from Fmin to 870 MHz over temperature is 8.5 dB worst-case and from Fmin to 1003 MHz is 9 dB worst-case.

8.

9.

10.

11.

Frequencies that relate the picture carriers or passband edges to the specified output levels and tilts.

Measured with CW carriers and spectrum analyzer over specified temperature range. References the worst-case channel. Specifications are compliant with the test methods as stated in NCTA

RECOMMENDED PRACTICES FOR MEASUREMENTS ON CABLE TELEVISION SYSTEMS.

Measured with wave analyzer and synchronous, 100% depth modulated channels. References the worst-case channels over specified temperature range. Specifications are compliant with the test methods as stated in NCTA RECOMMENDED PRACTICES FOR MEASUREMENTS ON CABLE TELEVISION SYSTEMS.

Composite Second Order distortion refers only to those beat clusters that fall +0.75 MHz and +1.25 MHz above the subject picture carrier. CSO beat clusters that have a -0.75 MHz and -1.25

MHz relationship to the subject picture carrier are not included in this specification.

Test points should be used with GFAL adaptor.

Match measurement at the station input and output, cable-entry facilities, at the specified passbands for operational gain.

Measured with the stated AC Bypass Current.

Measured at the power connector.

Current draw at +24.0 VDC.

AC current is stated in RMS continuous. A 10-amp compatible electronics package is also available for installing into older 10-amp housings during upgrades.

Group Delay is specified for standard NTSC video, where delay is the delta from picture carrier to 3.58 MHz color subcarrier. Reverse delay is in a 1.5 MHz bandwidth.

Distortion numbers are worst case over temperature in a cascade.

The compressed data loading is QAM carriers and are –6 dB relative to the analog CW carriers.

CTB (Composite Triple Beat). At the specified channel loading, Enhanced Gallium Arsenide performance varies on a two point three-for-one (2.3:1) basis with amplifier output level.

BLE100 Block Diagram

Input port

RF/

AC

AC

RF

-1.7 dB F

-1.0 dB R

-20 dB

TP

-1.0dB

H

L

**

-1.0dB

-1.0dB

**

JXP-B

SCS

28 dB

PP

~ -3 dB

**

JXP-B

OnBrd

Atten

RC

-1.0dB

**

LDR

-6.5dB

**

BODE

Manual

Auto

ADU/

TDU

**

23 dB

PD

**

Status monitor

**

-0.4dB

TP

-20 dB

Surge protector

-0.5dB

SRE

**

Therm

**

OnBrd

Atten

-1.0dB

**

H

L

-1.0dB

-0.4dB

JXP-B **

TP

Return injection point

-20 dB

+30.0dB

-0.3dB

LPF

Power supply

-0.4dB

-16 dB

ICS

**

JXP

**

24 Vdc

DC test point

Surge protector TP

-20 dB

-1.7 dB F

-1.0 dB R

RF/

RF AC

AC

Output port

Power

Block

Jumper

Fuse

** Plug-in module

FTEC

Motorola, Inc.

101 Tournament Drive

Horsham, PA 19044 www.motorola.com/broadband

04.03.07

Rev 9

4

MOTOROLA, the Stylized M Logo, STARLINE, and LIFELINE are registered in the US Patent & Trademark Office.

All other product or service names are the property of their respective owners.

© Motorola, Inc. 2006. All rights reserved.

Specifications are subject to change without notice.

BLE100 Ordering Information

BLE100S-HXXH-E15

BLE-100SH

(“vanilla” model)

BLE100K-HXXH-E15

BLE-100KH

(“vanilla” model)

JXP-*B

Model

BLE100S-HQXH-F

BLE100S-HAXH-F

BLE100S-HTXH-F

BLE100S-HXXH-F

BLE100S-HSXH-F

BLE100K-HQXH-F

BLE100K-HAXH-F

BLE100K-HTXH-F

BLE100K-HXXH-F

BLE100K-HSXH-F

BLE100A-HXXH-F-R

BLE100J-HXXH-F-R

Required Accessories

SFE-100-0

SFE-100-1 to -22

SCS-1 to SCS-10

SRE-*-*

Description

5-40 / 52-1003 MHz S-split, one output, 34 dB high gain forward, QAM ADU 609.00 MHz gain control, 9 dB internal slope, high gain return, full station

5-40 / 52-1003 MHz S-split, one output, 34 dB high gain forward, ADU 499.25 MHz gain control, 9 dB internal slope, high gain return, full station

5-40 / 52-1003 MHz S-split, one output, 34 dB high gain forward, TDU gain control, 9 dB internal slope, high gain return, full station

5-40 / 52-1003 MHz S-split, one output, 34 dB high gain forward, manual gain control, 9 dB internal slope, high gain return, full station

5-40 / 52-1003 MHz S-split, one output, 34 dB high gain forward, QAM ADU 711.00 MHz gain control, 9 dB internal slope, high gain return, full station

5-40 / 52-1003 MHz S-split, one output, 34 dB high gain forward, manual gain control, 9 dB internal slope, high gain return, 15A electronics module only (no housing)

5-40 / 52-1003 MHz S-split, one output, 34 dB high gain forward, manual gain control, 9 dB internal slope, no return, standard surge arrestor (no FTEC), full station

5-42 / 54-1003 MHz K-split, one output, 34 dB high gain forward, QAM ADU 609.00 MHz gain control, 9 dB internal slope, high gain return, full station

5-42 / 54-1003 MHz K-split, one output, 34 dB high gain forward, ADU 499.25 MHz gain control, 9 dB internal slope, high gain return, full station

5-42 / 54-1003 MHz K-split, one output, 34 dB high gain forward, TDU gain control, 9 dB internal slope, high gain return, full station

5-42 / 54-1003 MHz K-split, one output, 34 dB high gain forward, manual gain control, 9 dB internal slope, high gain return, full station

5-42 / 54-1003 MHz K-split, one output, 34 dB high gain forward, QAM ADU 711.00 MHz gain control, 9 dB internal slope, high gain return, full station

5-42 / 54-1003 MHz K-split, one output, 34 dB high gain forward, manual gain control, 9 dB internal slope, high gain return, 15A electronics module only (no housing)

5-42 / 54-1003 MHz K-split, one output, 34 dB high gain forward, manual gain control, 9 dB internal slope, no return, standard surge arrestor (no FTEC), full station

5-65 / 85-1003 MHz A-split, high gain forward, manual gain control, standard 9 dB slope, high gain return, full station, RoHS compliant

5-55 / 70-1003 MHz J-split, high gain forward, manual gain control, standard 9 dB slope, high gain return, full station, RoHS compliant

Starline Forward 1003 MHz equalizer (0 dB) -or-

Starline Forward 1003 MHz equalizer (values 1 to 22 dB in 1 dB steps) -or-

Starline Cable Simulator (values 1 to 10 dB in 1 dB steps)

Starline Return Equalizer, 5-40 MHz (S-split), 5-42 (K-split), 5-55 (J-split), 5-65 (A-split), values 0-12 dB in 1 dB steps for S-split (2 dB steps for all other frequency splits)

Plug-in attenuator/pad (values 0 to 26 dB, in 1 dB steps)

See next page for ordering guide/matrix.

Motorola, Inc.

101 Tournament Drive

Horsham, PA 19044 www.motorola.com/broadband

04.03.07

Rev 9

5

Motorola

Part Number

711000-001-00

711000-002-00

711000-003-00

711000-004-00

711000-021-00

711000-005-00

Qty per

BLE

535745-001-00

711000-007-00

711000-008-00

711000-009-00

711000-010-00

711000-027-00

711000-011-00

535745-002-00

811000-001-00

811000-002-00

527333-001-00

527296-001 to -022

1

477888-001 to -010

478176-XXX-00 1

474011-XXX-00 ≤ 5

MOTOROLA, the Stylized M Logo, STARLINE, and LIFELINE are registered in the US Patent & Trademark Office.

All other product or service names are the property of their respective owners.

© Motorola, Inc. 2006. All rights reserved.

Specifications are subject to change without notice.

1 GHz BLE Ordering Guide

Key

H

Gain

E-GaAs (High Output w/ 34 dB Gain)

Key

X

A

Q

S

Level Control

None

ADU - 499.25/S

QADU - 609.00/S

QADU - 711.00/S

Key

F

E15

Housing

Standard (Full Station)

Electronics only (15 amp)

BLE

-

Key

100S

Bandpass Split

5 - 40 MHz / 52 - 1003 MHz

Key

H

Return Gain

High (24 dB)

100K

100A

100J

100N

5 - 42 MHz / 54 - 1003 MHz

5 - 65 MHz / 85 - 1003 MHz

5 - 55 MHz / 70 - 1003 MHz

5 - 85 MHz / 104 - 1003 MHz

Key

X

Station Slope

9 dB (Fmin - 1003 MHz)

Key: Future options (not available today)

Notes:

1) Not all combinations in the ordering guide are available. This is a guide only. Please see “Ordering Information” (page 5) for available models.

2) FTECs are included in all models as standard, except for the “vanilla” models, BLE-100*H, which contain the standard gas tube.

3) 20A fuses are included in all amplifiers as standard.

4) ICS and status monitor transponders will continue to be customer configurable options.

5) For RoHS models, add “–R” to end of model string.

Motorola, Inc.

101 Tournament Drive

Horsham, PA 19044 www.motorola.com/broadband

04.03.07

Rev 9

6

MOTOROLA, the Stylized M Logo, STARLINE, and LIFELINE are registered in the US Patent & Trademark Office.

All other product or service names are the property of their respective owners.

© Motorola, Inc. 2006. All rights reserved.

Specifications are subject to change without notice.