Dynex DX-HTIB 200W 5.1-Ch. Upconvert DVD Home Theater System Quick Setup Guide

Congratulations on your purchase of a high-quality Dynex product. Your

Home Theater System is designed for reliable and trouble-free performance.

Use this guide for initial setup of your TV. See your User Guide for more information on using your Home Theater System.

Package contents

• Home theater player

• 5 speakers: left, right, center, left surround, right surround

• Subwoofer

• RCA stereo cable

• Composite video cable

• AM and FM antennas

• Remote control with batteries

• Speaker wire

• User Guide

• Quick Setup Guide

Setup Guide I DX-HTIB Home Theater System

Step 1 Get to know your player

Check out the front and back of your unit to familiarize yourself with button controls and connection options.

FRONT

1 Standby/On button

2 Headphone jack

3 USB port

4 Remote control sensor

5 Disc tray

6 Display screen

7 Eject/Stop button

8 (previous) button

9 (next) button

10 Source

11 Volume knob

12 PLAY/ENTER button

BACK

1 FM antenna connection

2 Component (Y, Pb/Cb, Pr/Cr)

output video jacks

3 Coaxial output jack

4 AUX 1 and 2 (audio) input jacks

5 Active subwoofer output jack

6 5.1 channel speaker output jacks

7 AC power supply cord

8 AM antenna connection

9 HDMI output jack

10 Audio (L & R)

11 Video output jack

12 Optical output jack

Step 2 Install remote control batteries

Remove the cover from the back of the remote control, insert batteries as indicated, then replace the cover.

Step 3 Connecting your system

Before connecting your system, refer to the pictures below. Each connection must be solid. Disconnect the power cables on all elements of the system until you have finished all of the connections.

How to connect your system

Best: HDMI Video connection

Back

Output to TV

TV

HDMI Cable

Video Input Audio L Audio R HDMI Y Pb/Cb Pr/Cr

Better: Component video connection

Component Cable

TV

Output to TV

Left speaker

Center speaker

TV

Subwoofer

Right speaker

Video Input Audio L Audio R HDMI Y Pb/Cb Pr/Cr

Good: Composite (analog) video connection

Best

Output to TV

TV

Video Input Audio L Audio R HDMI Y Pb/Cb Pr/Cr

Surround left Surround right

Connecting your speakers

Step 4 Connect power

Connect the AC power cord directly to a power outlet. Press the power button.

Step 5 Using the Setup menu

Your player has a Setup menu you can use to adjust settings.

See your User Guide! This comprehensive guide includes everything from basic how-to steps to more advanced features.

To use the Setup menu:

1 Press SETUP. The General Setup Page opens.

2 Press ◄or ►to select the menu page you want,

then press PLAY/ENTER.

3 Press ▲or ▼to select an option, then

press ► to open the sub-menu.

4 Press ▲or ▼ select an option, then press

PLAY/ENTER to confirm your selection.

5 Press ◄ to go to the previous menus.

6 Repeat Step 2 through Step 4 to select

other menu pages.

Video Cable

Controlling disc playback

To control disc playback:

• Press the OPEN/CLOSE button on the remote control

(or the EJECT button on your player). The disc tray opens.

• Place a disc, label side up, in the disc tray, then close the tray.

The disc starts playing automatically.

• Press to play/pause , press to stop.

Press to navigate in the on-screen DVD menus.

Using the radio

• Press STANDBY/ON to turn on the player.

• Press AM/FM to switch the player to radio

mode and toggle between the AM and FM bands.

• Press TUNE+ or TUNE– to select a station.

© 2010 BBY Solutions, Inc. All rights reserved. DYNEX is a trademark of BBY Solutions, Inc. Registered in some countries. All other products and brand names are trademarks of their respective owners.

English 10-0271