U
DVD HOME THEATER SOUND SYSTEM
DVX-S100
DVX-S100: DVR-S100 + NX-S100S + NX-S100C + SW-S100
OWNER’S MANUAL
IMPORTANT SAFETY INSTRUCTIONS
10
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
11
• Explanation of Graphical Symbols
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert you to the
presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle
is intended to alert you to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
1
2
3
4
5
6
7
8
9
Read Instructions – All the safety and operating instructions
should be read before the product is operated.
Retain Instructions – The safety and operating instructions
should be retained for future reference.
Heed Warnings – All warnings on the product and in the
operating instructions should be adhered to.
Follow Instructions – All operating and use instructions
should be followed.
Cleaning – Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
Attachments – Do not use attachments not recommended
by the product manufacturer as they may cause hazards.
Water and Moisture – Do not use this product near water –
for example, near a bath tub, wash bowl, kitchen sink, or
laundry tub; in a wet basement; or near a swimming pool;
and the like.
Accessories – Do not place this product on an unstable cart,
stand, tripod, bracket, or table. The product may fall,
causing serious injury to a child or adult, and serious
damage to the product. Use only with a cart, stand, tripod,
bracket, or table recommended by the manufacturer, or sold
with the product. Any mounting of the product should
follow the manufacturer’s instructions, and should use a
mounting accessory recommended by the manufacturer.
A product and cart combination should be
moved with care. Quick stops, excessive
force, and uneven surfaces may cause the
product and cart combination to overturn.
CAUTION
12
13
14
15
16
17
18
19
Ventilation – Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of the
product and to protect it from overheating, and these
openings must not be blocked or covered. The openings
should never be blocked by placing the product on a bed,
sofa, rug, or other similar surface. This product should not
be placed in a built-in installation such as a bookcase or
rack unless proper ventilation is provided or the
manufacturer’s instructions have been adhered to.
Power Sources – This product should be operated only from
the type of power source indicated on the marking label. If
you are not sure of the type of power supply to your home,
consult your product dealer or local power company. For
products intended to operate from battery power, or other
sources, refer to the operating instructions.
Grounding or Polarization – This product may be equipped
with a polarized alternating current line plug (a plug having
one blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit, contact
your electrician to replace your obsolete outlet. Do not
defeat the safety purpose of the polarized plug.
Power-Cord Protection – Power-supply cords should be
routed so that they are not likely to be walked on or pinched
by items placed upon or against them, paying particular
attention to cords at plugs, convenience receptacles, and the
point where they exit from the product.
Lightning – For added protection for this product during a
lightning storm, or when it is left unattended and unused for
long periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prevent
damage to the product due to lightning and power-line
surges.
Power Lines – An outside antenna system should not be
located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into such
power lines or circuits. When installing an outside antenna
system, extreme care should be taken to keep from touching
such power lines or circuits as contact with them might be
fatal.
Overloading – Do not overload wall outlets, extension
cords, or integral convenience receptacles as this can result
in a risk of fire or electric shock.
Object and Liquid Entry – Never push objects of any kind
into this product through openings as they may touch
dangerous voltage points or short-out parts that could result
in a fire or electric shock. Never spill liquid of any kind on
the product.
Servicing – Do not attempt to service this product yourself
as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to
qualified service personnel.
Damage Requiring Service – Unplug this product from the
wall outlet and refer servicing to qualified service personnel
under the following conditions:
a) When the power-supply cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into
the product,
c) If the product has been exposed to rain or water,
d)
20
21
22
23
If the product does not operate normally by following
the operating instructions. Adjust only those controls
that are covered by the operating instructions as an
improper adjustment of other controls may result in
damage and will often require extensive work by a
qualified technician to restore the product to its normal
operation,
e) If the product has been dropped or damaged in any
way, and
f) When the product exhibits a distinct change in
performance - this indicates a need for service.
Replacement Parts – When replacement parts are required,
be sure the service technician has used replacement parts
specified by the manufacturer or have the same
characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other
hazards.
Safety Check – Upon completion of any service or repairs
to this product, ask the service technician to perform safety
checks to determine that the product is in proper operating
condition.
Wall or Ceiling Mounting – The unit should be mounted to
a wall or ceiling only as recommended by the manufacturer.
Heat – The product should be situated away from heat
sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
Note to CATV system installer:
This reminder is provided to call the CATV system installer’s
attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and, in particular, specifies
that the cable ground shall be connected to the grounding
system of the building, as close to the point of cable entry as
practical.
24
Outdoor Antenna Grounding – If an outside antenna or
cable system is connected to the product, be sure the
antenna or cable system is grounded so as to provide some
protection against voltage surges and built-up static charges.
Article 810 of the National Electrical Code, ANSI/NFPA
70, provides information with regard to proper grounding of
the mast and supporting structure, grounding of the lead-in
wire to an antenna discharge unit, size of grounding
conductors, location of antenna discharge unit, connection
to grounding electrodes, and requirements for the
grounding electrode.
EXAMPLE OF ANTENNA GROUNDING
MAST
ANTENNA
LEAD IN
WIRE
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810–20)
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810–21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250. PART H)
NEC – NATIONAL ELECTRICAL CODE
FCC INFORMATION (for US customers only)
1.
2.
3.
IMPORTANT NOTICE : DO NOT MODIFY THIS
UNIT!
This product, when installed as indicated in the
instructions contained in this manual, meets FCC
requirements. Modifications not expressly approved
by Yamaha may void your authority, granted by the
FCC, to use the product.
IMPORTANT : When connecting this product to
accessories and/or another product use only high
quality shielded cables. Cable/s supplied with this
product MUST be used. Follow all installation
instructions. Failure to follow instructions could void
your FCC authorization to use this product in the USA.
NOTE : This product has been tested and found to
comply with the requirements listed in FCC
Regulations, Part 15 for Class “B” digital devices.
Compliance with these requirements provides a
reasonable level of assurance that your use of this
product in a residential environment will not result in
harmful interference with other electronic devices.
This equipment generates/uses radio frequencies and,
if not installed and used according to the instructions
found in the users manual, may cause interference
harmful to the operation of other electronic devices.
Compliance with FCC regulations does not guarantee
that interference will not occur in all installations. If
this product is found to be the source of interference,
which can be determined by turning the unit “OFF” and
“ON”, please try to eliminate the problem by using one
of the following measures:
Relocate either this product or the device that is being
affected by the interference.
Utilize power outlets that are on different branch (circuit
breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient
the antenna. If the antenna lead-in is 300 ohm ribbon
lead, change the lead-in to coaxial type cable.
If these corrective measures do not produce satisfactory
results, please contact the local retailer authorized to
distribute this type of product. If you can not locate the
appropriate retailer, please contact Yamaha Electronics
Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA
90620.
The above statements apply ONLY to those products
distributed by Yamaha Corporation of America or its
subsidiaries.
CAUTION
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
Install this sound system in a well ventilated, cool, dry, clean
place with at least 10 cm on the top, 10 cm on the left and
right, and 10 cm at the back of DVR-S100, and 20 cm on the
top, 10 cm on the left and right, and 10 cm at the back of
SW-S100 — away from direct sunlight, heat sources,
vibration, dust, moisture, and/or cold.
Locate this unit away from other electrical appliances,
motors, or transformers to avoid humming sounds. To
prevent fire or electrical shock, do not place this unit where
it may get exposed to dripping or splashing, and never put
any objects filled with liquids, such as vases, on the top of
the unit.
Do not expose this unit to sudden temperature changes from
cold to hot, and do not locate this unit in a environment with
high humidity (i.e. a room with a humidifier) to prevent
condensation inside this unit, which may cause an electrical
shock, fire, damage to this unit, and/or personal injury.
Avoid installing this unit in a place where foreign objects
and liquid might fall. It might cause a fire, damage to this
unit and/or personal injury. Do not place the following
objects on this unit:
– Other components, as they may cause damage and/or
discoloration on the surface of this unit.
– Burning objects (i.e. candles), as they may cause fire,
damage to this unit, and/or personal injury.
– Containers with liquid in them, as they may cause
electrical shock to the user and/or damage to this unit.
Do not cover this unit with a newspaper, tablecloth, curtain,
etc. in order not to obstruct heat radiation. If the temperature
inside this unit rises, it may cause fire, damage to this unit,
and/or personal injury.
Do not plug in this unit to a wall outlet until all connections
are complete.
Do not operate this unit upside-down. It may overheat,
possibly causing damage.
Do not use force on switches, knobs and/or cords.
When disconnecting the power cord from the wall outlet,
grasp the plug; do not pull the cord.
Do not clean this unit with chemical solvents; this might
damage the finish. Use a clean, dry cloth.
Only voltage specified on this unit must be used. Using this
unit with a higher voltage than specified is dangerous and
may cause fire, damage to this unit, and/or personal injury.
YAMAHA will not be held responsible for any damage
resulting from use of this unit with a voltage other than
specified.
To prevent damage by lightning, disconnect the power cord
from the wall outlet during an electrical storm.
Take care of this unit so that no foreign objects and/or liquid
drops inside this unit.
Do not attempt to modify or fix this unit. Contact qualified
YAMAHA service personnel when any service is needed.
The cabinet should never be opened for any reasons.
16 When not planning to use this unit for long periods of time
(i.e. vacation), disconnect the AC power plug from the wall
outlet.
17 Be sure to read the “TROUBLESHOOTING” section on
common operating errors before concluding that this unit is
faulty.
18 Before moving this unit, press STANDBY/ON to set this
unit in the standby mode, and disconnect the AC power plug
from the wall outlet.
19 VOLTAGE SELECTOR (General model only)
The VOLTAGE SELECTOR on the rear panel of this unit
must be set for your local main voltage BEFORE plugging
into the AC main supply.
Voltages are 220/240 V AC, 50 Hz.
This unit is not disconnected from the AC power source as
long as it is connected to the wall outlet, even if this unit
itself is turned off. This state is called the standby mode. In
this state, this unit is designed to consume a very small
quantity of power.
IMPORTANT
Please record the serial number of this unit in the space
below.
MODEL:
Serial No.:
The serial number is located on the bottom of the unit.
Retain this Owner’s Manual in a safe place for future
reference.
FOR CANADIAN CUSTOMERS
To prevent electric shock, match wide blade of plug to wide
slot and fully insert.
This Class B digital apparatus complies with Canadian ICES003.
DANGER
Visible laser radiation when open. Avoid direct exposure to
beam.
When this unit is plugged to the wall outlet, do not place your
eyes close to the opening of the disc tray and other openings to
look into inside.
The laser component in this product is capable of emitting
radiation exceeding the limit for Class 1.
The name plate is located on the bottom of the unit.
We Want You Listening For A Lifetime
YAMAHA and the Electronic Industries Association’s Consumer
Electronics Group want you to get the most out of your
equipment by playing it at a safe level. One that lets the sound
come through loud and clear without annoying blaring or
distortion – and, most importantly, without affecting your
sensitive hearing.
CAUTION
Since hearing damage from loud sounds is often
undetectable until it is too late, YAMAHA and the
Electronic Industries Association’s Consumer
Electronics Group recommend you to avoid
prolonged exposure from excessive volume levels.
CONTENTS
INTRODUCTION
FEATURES .......................................................................... 2
CHECKING THE ACCESSORIES ................................... 3
INSTALLING BATTERIES IN THE REMOTE
CONTROL ........................................................................... 3
CONTROLS AND FUNCTIONS ....................................... 4
Front panel ......................................................................... 4
Remote control (AMP mode) ............................................ 6
Front panel display (left) ................................................... 8
Front panel display (right) ................................................. 9
PREPARATION
PREPARATION STEPS ................................................... 10
SPEAKER SETUP ............................................................. 11
Speaker placement ........................................................... 11
Installing the speakers ..................................................... 12
CONNECTIONS ................................................................ 14
Connecting TV and audio/video components ................. 14
Connecting the antennas .................................................. 16
Connecting the speakers .................................................. 17
Connecting to an external amplifier ................................ 19
Connecting the AC power cord ........................................ 19
Turning on the power ....................................................... 19
ADJUSTING SPEAKER OUTPUT LEVELS ................ 20
Using the test tone ........................................................... 20
USING BASIC FUNCTIONS
BASIC PLAYBACK .......................................................... 21
Basic operations ............................................................... 21
Selecting a sound field program ...................................... 23
RECORDING .................................................................... 28
PLAYING A DISC
TUNING
TUNING ............................................................................. 54
Automatic and manual tuning ......................................... 54
Presetting stations ............................................................ 55
Tuning in to a preset station ............................................. 56
Exchanging preset stations .............................................. 56
REMOTE CONTROL FEATURES
OPERATING OTHER COMPONENTS USING THE
REMOTE CONTROL ....................................................... 57
Setting the manufacturer code ......................................... 57
ADJUSTMENTS
SET MENU ......................................................................... 59
List of SET MENU items ................................................ 59
Adjusting the items on the SET MENU .......................... 59
1 SPEAKER SET (speaker mode settings) .................... 60
2 LFE LEVEL ................................................................ 61
3 SP DLY TIME (speaker delay time) ........................... 62
4 D. RANGE (dynamic range) ....................................... 62
5 L/R BALANCE (balance of the front left and right
speakers) ...................................................................... 62
6 HP TONE CTRL (headphone tone control) ................ 62
7 I/O ASSIGN (input assignment) ................................. 63
8 INPUT MODE (initial input mode) ............................ 63
9 SP/PRE OUT (output source settings) ......................... 63
ADJUSTING THE LEVEL OF THE EFFECT
SPEAKERS ........................................................................ 64
CHANGING THE PARAMETER SETTINGS FOR DSP
PROGRAMS ...................................................................... 65
Adjusting the delay time .................................................. 65
Adjusting the parameter settings for PRO LOGIC II
Music ............................................................................... 66
APPENDIX
TROUBLESHOOTING .................................................... 67
GLOSSARY ....................................................................... 72
SPECIFICATIONS ............................................................ 75
English
DISC INFORMATION ..................................................... 29
Types of disc that this unit can play ................................ 29
Region management information .................................... 29
Notes about handling discs .............................................. 29
MP3 playback .................................................................. 30
REMOTE CONTROL (DVD MODE) ............................. 31
PLAYING A DISC ............................................................. 32
Basic operation ................................................................ 32
ON-SCREEN MENU ......................................................... 34
Operating menu bar ......................................................... 34
Icons for disc menu ......................................................... 35
Icons for player menu ...................................................... 36
USING MULTIPLE FUNCTIONS .................................. 38
Using a disc’s menu ......................................................... 38
Enhancing video quality
[U.S.A. and Canada models only] ................................... 38
DVD-Audio features ........................................................ 39
Enhancing audio quality (DISC DIRECT) ...................... 40
Switching audio tracks, subtitles and angles ................... 41
All group play .................................................................. 42
Programmed play ............................................................. 42
Random play .................................................................... 43
Bookmarks ....................................................................... 44
Repeat play ...................................................................... 45
Repeat A-B ...................................................................... 46
SETUP MENU ................................................................... 47
Operating the setup menu ................................................ 47
Summary of settings ........................................................ 48
Ratings ............................................................................. 51
PCM down conversion ..................................................... 51
Speaker settings ............................................................... 52
1
FEATURES
The DVX-S100 is the Home Theater Sound System that delivers a powerful and realistic sound experience like that
found in a movie theater just by combining the unit with the TV.
The newest DSP programs will enhance the power and realism of various sources, from movies to concerts, and
sporting events. Also, the Silent Cinema program allows you to enjoy the sound field even through the headphones.
Since the DVX-S100 consists of a DVD Audio/Video receiver, a center speaker, front speakers, rear speakers and a
subwoofer, you can enjoy stronger bass and surround effects as well as a good balance throughout the speakers.
Moreover, the One-touch connection of the speaker connectors designed exclusively for this unit allows you to easily
connect the speakers.
◆ Built-in 5-channel power amplifier
◆ DVD-AUDIO/VIDEO, CD, VCD, MP3, CD-R/
RW playback
◆ Dolby Pro Logic/Dolby Pro Logic II decoder
◆ Dolby Digital/Dolby Digital + Matrix 6.1
decoder
◆ DTS/DTS + Matrix 6.1 decoder
◆ Sophisticated FM/AM tuner
◆ CINEMA DSP: Combination of YAMAHA DSP
technology and Dolby Pro Logic, Dolby Digital
or DTS
◆ Virtual CINEMA DSP
◆ SILENT CINEMA DSP
◆ Easy connection of the center speaker, front
speakers and rear speakers using special speaker
connectors designed exclusively for this unit
◆ Multi-function remote control which can also be
used for other audio/video components of certain
manufacturers
■ About this manual
• y indicates a tip for your operation.
• Some operations can be performed by using the buttons
on either the main unit or the remote control. In this
case, the operations performed by using the remote
control are described in this manual.
• This manual is printed prior to production. Design and
specifications are subject to change in part for the
reason of the improvement in operativity ability, and
others. In this case, the product has priority.
• Some of the illustrations and names of the package
contents etc written in this manual may differ from the
actual products and the names written on the package
etc.
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic”, and the double-D symbol are
trademarks of Dolby Laboratories.
“DTS” and “DTS Digital Surround” are registered
trademarks of Digital Theater Systems, Inc.
(U.S.A. and Canada models)
“DCDi” is a trademark of Faroudja, a division of Sage
Inc.
This product incorporates copyright protection
technology that is protected by method claims of certain
U.S. patents and other intellectual property rights owned
by Macrovision Corporation and other rights owners. Use
of this copyright protection technology must be
authorized by Macrovision Corporation, and is intended
for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
2
CHECKING THE ACCESSORIES
DVR-S100
NX-SW100 (NX-S100S x4, NX-S100C, SW-S100)
Remote control
POWER
TV
Batteries (x2)
(AA, R06, UM-3)
AM loop antenna
POWER
AV
Fasteners (4 sets)
Pads
Non-skid pads
for the center
(2 sets: 16 pieces) (2 sets: 16 pieces)
speaker
SLEEP
TV MODE
INPUT
INTRODUCTION
Check your package to make sure it contains the following items.
TUNER
CH
VOL
MUTE
MD
CD–R
AUDIO
SUBTITLE
VCR
REC
VIDEO 2
VIDEO 1
CD
CODE SET
SHIFT
HALL
JAZZ
DVD
AMP
ROCK
ENTERTAINMENT
1
2
3
4
SPORTS
SETUP
MONO MOVIE
ANGLE
MOVIE 1
MARKER
MOVIE 2
5
6
/DTS
PLAY MODE
SELECT
9
7
8
REPEAT
MATRIX 6.1
A–B
STEREO
>
–10
0
GROUP
TOP MENU
LEVEL
MENU
SET MENU
PRESET
CH
Indoor FM antenna
(U.S.A., Canada and (Europe, U.K. and
Australia models)
General models)
CANCEL
Speaker cables
(for the rear speakers: 15m (x2),
for the front/center speaker:
5m (x3))
PAGE
MUTE
ABCDE
ENTER
CH
PRESET
TEST
ON SCREEN
B. BOOST
RETURN
VOL
System connector
cable (5m x 1)
Video pin cable
INSTALLING BATTERIES IN THE REMOTE CONTROL
Insert the batteries in the correct direction by aligning the
+ and – marks on the batteries with the polarity markings
(+ and –) inside the battery compartment.
2
1
3
1
Press the
part and slide off the battery
compartment cover.
2
Insert the two batteries (AA, R06, UM-3 type)
with + and – oriented properly.
3
Slide the cover back on so that it snaps into
place.
■ Notes on batteries
• Change all of the batteries if you notice a decrease in
the operating range of the remote control.
• Do not use old batteries together with new ones.
• Do not use different types of batteries (such as alkaline
and manganese batteries) together. Read the packaging
carefully as these different types of batteries may have
the same shape and color.
• If the batteries have leaked, dispose of them
immediately. Avoid touching the leaked material or
letting it come into contact with clothing, etc. Clean the
battery compartment thoroughly before installing new
batteries.
Preserving the manufacturer code
Replace batteries early before they become unusable.
The manufacturer code set by the user will be
preserved for about two minutes when batteries run
out or when they are removed. Note that the
manufacturer code setting may be lost if more than
two minutes elapses. Also, if you press any button on
the remote control accidentally while replacing
batteries, the manufacturer code will be lost.
English
3
103_S100_01-09_EN
3
02.5.13, 1:26 PM
CONTROLS AND FUNCTIONS
Front panel
1
2
3
4 5 6
7
STANDBY/ON
A/B/C/D/E
PRESET/BAND
PRESET/TUNING
8 9
PROGRESSIVE
DISC DIRECT
MEMORY
AUTO/MAN’L
0 q w e r
SILENT
t
y
MEMORY
u
(U.K., Europe, Australia and General models)
1 STANDBY/ON
Turns this unit on, or set it to the standby mode. When
you turn this unit on, you will hear a click and there will
be a 4 to 5-second delay before this unit can reproduce
sound.
Standby mode
In this mode, this unit will consume a small amount of
power in order to receive infrared-signals from the
remote control.
2 Disc tray
The disc you play is loaded on this tray.
3 v
Press to open and close the disc tray.
4 w
Press to start playback.
5 a (A/B/C/D/E)
(DVD mode)
Press to stop playback.
(Tuner mode)
Selects preset station groups A to E.
6 d (PRESET/BAND)
(DVD mode)
Press to pause.
(Tuner mode)
Switches the reception band between FM and AM and
also the mode between the tuning mode and the preset
mode.
4
7 t/e, r/y (d PRESET/TUNING /
PRESET/TUNING u)
(DVD mode)
Each time these buttons are pressed, the disc begins
playing from the beginning of the track you select. When
you keep pressing the buttons, the disc searches forward
or backward.
(Tuner mode)
Selects preset station numbers 1 to 8 when the colon (:)
appears in the front panel display.
Selects the tuning frequency when the colon (:) does not
appear.
8 PROGRESSIVE (MEMORY) (U.S.A. and
Canada models)
(DVD mode)
Switches between progressive video output and interlace
video output.
(Tuner mode)
Stores the current station in the memory.
MEMORY (U.K., Europe, Australia and
General models)
(Tuner mode)
Stores the current station in the memory.
9 DISC DIRECT (AUTO/MAN’L)
(DVD mode)
Changes the modes of DISC DIRECT function.
(Tuner mode)
Switches the tuning mode between automatic and manual.
CONTROLS AND FUNCTIONS
0 INPUT H/G
Selects the input source you want to listen to or watch.
INTRODUCTION
q INPUT MODE
Sets the priority for the types of input signals (AUTO,
DTS, ANALOG) to receive when one component is
connected to two or more input jacks.
w DSP H/G
Selects the DSP program.
e STEREO
Switches between normal stereo and DSP effect
reproduction. When STEREO is selected, 2-channel
signals are directed to the front left and right speakers
without effect sounds.
r VOLUME +/–
Controls the output level of all audio channels.
This does not affect the recording (Rec) level.
t Remote control sensor
Receives signals from the remote control.
y Front panel display
Shows information about the operational status of this
unit.
SILENT
u
Allows you enjoy DSP effect for private listening with
headphones. When you connect headphones, no signals
are output to the speakers.
English
5
CONTROLS AND FUNCTIONS
Remote control (AMP mode)
This section explains the function of each button on the
remote control when you operate this unit as an amplifier,
not as a tuner or a DVD player. Make sure that the AMP
mode is selected before starting operation.
Refer to “REMOTE CONTROL (DVD MODE)” on page
31 for the details about the functions of the remote
control when you control this unit in the DVD mode.
Also, refer to “OPERATING OTHER COMPONENTS
USING THE REMOTE CONTROL” on pages 57 and 58
for the details about its functions when controlling other
components connected to this unit.
3 CODE SET
Used when setting up the manufacturer code.
4 DSP program buttons
Select DSP programs for the AMP position. Press a
button repeatedly to select a DSP program within that
group.
5 LEVEL
Selects the effect speaker channel to be adjusted.
y
6 Cursor buttons (j, i, u, d)/ENTER
Select SET MENU items and change the settings on the
SETUP menu etc.
• The buttons on the remote control whose names are written in
purple are operation buttons when you operate this unit in the
AMP mode.
7 TEST
Outputs the test tone to adjust the speaker levels.
8 SLEEP
Sets the sleep timer.
1
8
POWER
TV
POWER
AV
SLEEP
9
0 Input selector buttons/AMP
Select the input source and set the remote control to
operate the selected source component. Sets the remote
control to the AMP mode for controlling this unit.
TV MODE
INPUT
CH
TUNER
VOL
MUTE
2
MD
CD–R
AUDIO
SUBTITLE
VCR
REC
VIDEO 2
0
VIDEO 1
CODE SET
3
4
CD
SHIFT
HALL
JAZZ
6
7
AMP
ENTERTAINMENT
1
2
3
4
SETUP
MONO MOVIE
ANGLE
MOVIE 1
MARKER
MOVIE 2
5
6
7
8
PLAY MODE
SELECT
REPEAT
MATRIX 6.1
A–B
STEREO
0
>
–10
CANCEL
9
5
DVD
ROCK
SPORTS
/DTS
TOP MENU
LEVEL
GROUP
MENU
SET MENU
PRESET
CH
9 POWER ( )
Turns this unit on, or set it to the standby mode.
q
PAGE
MUTE
ABCDE
ENTER
AMP
w
e
q STEREO
Switches between normal stereo and DSP effect
reproduction. When STEREO is selected, 2-channel
signals are directed to the front left and right speakers
without effect sounds and all Dolby Digital and DTS
signals (except the LFE channel) are mixed down to the
front left and right speakers.
w MUTE
Mutes the sound. Press again to restore the audio output
to the previous volume level.
r
e SET MENU
Selects the SET MENU mode.
t
r VOL +/–
Increases or decreases the volume level.
CH
PRESET
TEST
ON SCREEN
B. BOOST
RETURN
VOL
t B. BOOST
Turns BASS BOOST function on or off.
(U.S.A. model)
1 Infrared window
Outputs infrared control signals. Aim this window at the
component you want to operate.
2 Basic operation buttons
Used to operate the components selected with input
selector buttons.
6
CONTROLS AND FUNCTIONS
■ Using the remote control
INTRODUCTION
Approximately 6 m (20 feet)
30°
30°
Handling the remote control
• Do not spill water or other liquids on the remote
control.
• Do not drop the remote control.
• Do not leave or store the remote control in the
following types of conditions:
– high humidity or temperature such as near a heater,
stove or bath;
– dusty places; or
– in places subject to extremely low temperatures.
English
7
CONTROLS AND FUNCTIONS
Front panel display (left)
This front panel display mainly displays the information related to the playback of discs.
1
2
PGM RND A – B GROUP TITLE TRACK
DVD V CD
VIDEO
AUDIO
3
CHAP
4
5
D.MIX P.PCM MLT.CH
888888888888
6
7 8
9
1 Play mode indicators
PGM: Programmed play / RND: Random play /
: Repeat play / A-B
: Repeat A-B
6 Disc type indicators
Indicates the type of disc. For example, DVD and AUDIO
lights up when playing a DVD-Audio disc.
2 Mode type indicators
GROUP: Group mode / TITLE: Title mode /
TRACK: Track mode / CHAP: Chapter mode
7 w
Lights up during playback. Blinks while resume function
is working.
3 D.MIX (Down Mix)
Lights up when the currently playing multi-channel audio
track is mixed down into 2-channel.
8 d
Lights up while playback is paused.
4 P.PCM (Packed PCM)
Lights up while a P.PCM signal is input.
5 MLT.CH (Multi Channel)
Lights up while a multi-channel signal is output.
8
9 Multi-information display (left)
Shows various information such as title, chapter or track
number, elapsed playing time etc.
CONTROLS AND FUNCTIONS
Front panel display (right)
MATRIX
DIGITAL
PRO LOGIC/
DSP
PCM
q
w
2 34
VIRTUAL
B. BOOST
SP
PRE
5
6
7
8
INTRODUCTION
(U.K. and Europe models only) o
1
9 0
SILENT DVD/CD VIDEO 1VIDEO 2 VCR MD/CD–R TUNER STEREO AUTO TUNED
PS PTY RT CT
MOVIE THTR 12ENTERTAINMENT DTSDOLBY DIGITALPRO LOGIC
PTY HOLD MEMORY
L C R
SLEEP
dB
ms MUTE LFE RL RC RR
88888888888888
e
1 Decoder indicators
Lights up when the t, g,
MATRIX are activated.
r
PRO LOGIC/
t
or
2 VIRTUAL indicator
Lights up in the virtual cinema DSP mode.
3 Headphones indicator
Lights up when headphones are connected.
4 SP/PRE indicator
The indicator of the item selected in “9 SP/PRE OUT” on
the SET MENU lights up. (But it does not light up when
headphones are connected.)
5 SILENT indicator
Lights up when headphones are connected while the
digital sound field processor is on.
6 Input source indicator
Shows the current input source with a cursor.
7 STEREO indicator
Lights up when this unit is receiving a strong signal for an
FM stereo broadcast while the “AUTO” indicator is lit.
8 AUTO indicator
Shows that this unit is in the automatic tuning mode.
9 TUNED indicator
Lights up when this unit is tuned to a station.
0 MEMORY indicator
Flashes to show a station can be stored.
yu
i
q DSP indicator
Lights up when you select DSP programs.
w v indicator
Lights up when this unit is reproducing PCM (pulse code
modulation) digital audio signals.
e B. BOOST indicator
Lights up when BASS BOOST is ON. (But it does not
light up when headphones are connected.)
r DSP program indicators
The name of the selected DSP program lights up when
the ENTERTAINMENT, MOVIE THEATER 1, MOVIE
THEATER 2 or V/DTS SURROUND DSP program is
selected.
t Multi-information display (right)
Shows the current DSP program name and other
information when adjusting or changing settings.
y SLEEP indicator
Lights up while the sleep timer is on.
u MUTE indicator
Flashes while the MUTE function is on.
i Input channel indicator
Indicates the channel components of input signals being
received.
o RDS indicator (U.K. and Europe models)
The name(s) of the RDS data offered by the currently
received RDS station light(s) up.
PTY HOLD indicator lights up while searching for
stations in the PTY SEEK mode.
English
9
PREPARATION STEPS
In order to enjoy sound and video images with this sound
system, follow the procedures as described below. See
each page for details.
Installing batteries in the remote control (P.3)
Speaker setup (P.11)
• Speaker placement (P.11)
• Installing the speakers (P.12)
Connections (P.14 – 19)
• Connecting TV and audio/video components (P.14)
• Connecting the antennas (P.16)
• Connecting the speakers (P.17)
• Connecting the AC power cord (P.19)
• Turning on the power (P.19)
Before connecting components
• Do not connect this unit or other components to the
mains power until all connections between the
components have been completed.
• Be sure all connections are made correctly, that is to
say, L (left) to L, R (right) to R, “+” to “+” and “–” to
“–”. Some components require different connection
methods and have different jack names. Refer to the
operation instructions for each component to be
connected to this unit.
• Insert the plugs properly. The speakers may not output
any sound or may output noise if they are not inserted
properly.
• The name of jack corresponds to input selector.
• The VOLTAGE SELECTOR on the rear panel of this
unit must be set for your local main voltage BEFORE
plugging into the AC main supply. Voltages are
220/240 V AC, 50 Hz. (General model)
VOLTAGE SELECTOR
Adjusting speaker output levels (P.20)
240V
220V
VOLTAGE SELECTOR
(General model)
After connecting components
• Check them again to make sure they are correct.
10
SPEAKER SETUP
Speaker placement
Refer to the following diagram when you place the
speakers.
The front speakers are used for the main source sound
plus effect sounds. The rear speakers are used for effect
and surround sounds. The center speaker is for the center
sounds (dialog, vocals, etc.).
Center speaker
PREPARATION
This unit has been designed to provide the best soundfield quality with a 5-speaker system, using front left and
right speakers, rear left and right speakers and a center
speaker.
Front speaker (R)
Rear speaker (R)
Notes
• If you do not use any of effect speakers (rear and/or center),
change the settings of SPEAKER SET items at the SET MENU
(p.60) to designate the signals to other terminals you connect
speakers to.
• If you use speakers (with different tonal qualities) instead of
the included speakers, the tone of a moving human voice and
other types of sound may not shift smoothly. We recommend
that you use speakers from the same manufacturer or speakers
with the same tonal quality.
1.8 m (6 feet)
Front speaker (L)
Subwoofer
Rear speaker (L)
Front speakers
Place the front left and right speakers an equal distance
from the ideal listening position. The distance between
each speaker and each side of the video monitor should
also be the same.
Center speaker
Align the front face of the center speaker with the front
face of your video monitor. Place the speaker as close to
the monitor as possible (such as directly over or under the
monitor) and centrally between the front speakers.
Rear speakers
Place these speakers behind your listening position,
facing slightly inwards, nearly 1.8 m (6 feet) above the
floor.
Subwoofer
The position of the subwoofer is not so critical, because
low bass sounds are not highly directional. But it is better
to place the subwoofer near the front speakers. Turn it
slightly toward the center of the room to reduce wall
reflections.
Note
• Although the speaker system in this unit is magnetically
shielded, it may still affect the color on the television monitor
when using this unit near the television. Adjust the relative
positions of this unit and the television if this happens.
English
11
SPEAKER SETUP
■ Mounting the front and rear
speakers
Installing the speakers
■ Placing the center speaker
Place the speaker on TV whose top is flat or on the floor
under the TV or inside the TV rack so that it is stabilized.
When placing the speaker on top of the TV, to prevent the
speaker from falling down, put the provided fasteners at
four points on the bottom of the speaker and the top of the
TV.
When mounting the front and rear speakers on a wall, use
the holes on the speakers’ back panels.
1
Put the provided pads at the four corners on
the rear of the front and rear speakers to
prevent the front and rear speakers from
moving by vibrations.
2
Fasten screws into a firm wall or wall
support as shown below.
Fastener
Peel off the
seal
Cautions
Diam. 3.5 to 4 mm
• Do not place the speaker on top of the TV whose area is
smaller than the bottom area of the speaker. If placed, the
speaker may drop out causing an injury to you.
• Do not place the speaker on top of the TV with an inclination.
• Do not touch the adhesive surface after peeling off the seal as
this will weaken its adhesive strength.
• Thoroughly wipe clean the surface where the fastener is to be
applied. Note that adhesive strength is weakened if the surface
is dirty, oily or wet and that this may cause the center speaker
to drop.
■ Placing the front and rear
speakers
When placing the front and rear speakers on a flat
surface, attach the included non-skid pads to the corners
on the bottom of the speakers as shown below. This
prevents the speakers from sliding around.
Non-skid pads
12
Min.
20 mm
6 mm
Tapping screw
(Available at the
hardware store)
SPEAKER SETUP
3
Hang the holes on the protruding screws.
60 mm
■ If you want to mount a speaker
on a commercially available
speaker stand (for the front/rear
speakers)
60 mm
• Make sure that the screws are securely caught by
the narrow parts of the holes.
• You can use the lower holes on the rear of the
front/rear speakers.
60 mm
PREPARATION
The screw holes (at an interval of 60 mm) on the bottom
and the rear of the speaker can be used to mount the
speaker on a speaker stand.
* Those screw holes can be used with M4 screws only.
Front/rear speaker
(bottom)
60 mm
Cautions
• Each speaker weighs 1.1 kg (2 lbs. 6 oz.). Do not mount them
on thin plywood or a wall with soft surface material. If
mounted, the screws may come out of the flimsy surface and
the speakers may fall. This damages the speakers or causes
personal injury.
• Do not install the speakers to a wall with nails, adhesives, or
any other unstable hardware. Long-term use and vibrations
may cause them to fall.
• To avoid accidents resulting from tripping over loose speaker
cables, fix them to the wall.
• Select a proper position on the wall to mount the speaker so
that no one will injure his/her head or face.
Front/rear speaker
(rear)
English
13
CONNECTIONS
Connecting TV and audio/video
components
■ Types of audio jacks
L
R
■ Types of video jacks
PR
PB
1
2
1
2
3
1 COMPONENT VIDEO jacks (U.S.A., Canada,
Australia and General models)
Transmit color difference (PB/CB, PR/CR) and luminance
separately and provide the best quality picture.
2 VIDEO jack
Conventional composite video signal.
3 S VIDEO jack
Transmits color and luminance separately and achieves
high-quality color reproduction.
Notes
1 COAXIAL jack
Connects a coaxial pin cable and provides the better
quality sound than analog audio jacks.
2 OPTICAL jack
Connects an optical fiber cable and provides the better
quality sound than analog audio jacks.
3 Analog audio jacks
Connect an audio pin cable.
y
• 1 and 2 are digital jacks.
• You can use the digital jacks to input PCM, Dolby Digital and
DTS bitstreams.
• All digital input jacks are acceptable for 96-kHz sampling
digital signals.
Notes
• Each type of video jack works independently. Signals input
through the composite video and S video jacks are only output
through the corresponding composite video and S video jacks.
• When you connect this unit to a video monitor, a video
component and a recording component, connect the same types
of jack, for example, the video jack on this unit to the video
jack on the video component.
• The description of the component video jacks may differ
depending on the component (e.g. Y, CB, CR/Y, PB, PR/Y, B-Y,
R-Y etc.). When using these jacks, refer also to the operation
instructions for the component being connected.
• Do not connect this unit to a video monitor through a video
cassette recorder. If you do so, the picture may not be played
back properly due to the copyright protection technology
incorporated in this unit.
• When progressive output (p.38) is selected in the DVD mode,
video signals are only output from the component video jacks.
• Digital output jack and analog OUT (Rec) jacks are
independent. Only digital signals are output from digital output
jack and analog signals from OUT (Rec) jacks.
• The OPTICAL jacks on this unit conform to the EIA standard.
If you use an optical cable that does not conform to this
standard, this unit may not function properly.
• Once you have connected a recording component to this unit,
keep its power turned on while using this unit. If the power is
off, this unit may distort the sound from other components.
Anti-dust cap
Remove the cap covering the OPTICAL jacks when
connecting an optical cable. Safely store the cap and
always re-insert it in the terminal when the terminal is not
in use. (This cap prevents the entrance of dust.)
Anti-dust cap
14
104_S100_10-20_EN
3
Y
14
02.5.13, 1:27 PM
CONNECTIONS
■ The connection example
Use a cable specified for connecting each type of jacks.
(The included video pin cable is used for connecting this unit to a video monitor.)
For Audio component
For Video Component
S Video cable
Coaxial cable
Component video cable
(U.S.A., Canada, Australia and General
models)
Optical cable
For A/V component
PREPARATION
Video pin cable (included)
Audio pin cable
Audio/Video cable
The connection example shown below is just an example. Connect in accordance with the components you have.
y
• The solid lines indicate the output from this unit and the dotted lines indicate the input to this unit.
INPUT
S VIDEO
VIDEO
COMPONENT
VIDEO
PR/CR
PB/CB
S Video cable
S Video cable
OUTPUT
INPUT
S VIDEO
S VIDEO
VIDEO
VIDEO
Video pin cable (included)
AUDIO
Component video cable
(U.S.A., Canada, Australia and General
models)
AUDIO
L
L
R
R
VCR
Audio/Video
cable
Y
Video monitor
S Video cable
PR
FM ANT
PB
Y
IN
IN
VIDEO
IN
OUT
OUT
IN
IN
IN
OUT
OUT
GND – AM ANT
S VIDEO
75ΩUNBAL.
MONITOR MONITOR
VIDEO 1
COMPONENT VIDEO OUT
MD/CD-R
VIDEO 1 MD/CD-R
[B]
[A]
COAXIAL
IN
OPTICAL
IN
OPTICAL
OUT
VCR
MD/CD-R
FRONT
REAR
CENTER
VCR
SYSTEM
CONNECTOR
MARK
L
Audio/Video cable
R
IN
DIGITAL
VIDEO 2
VIDEO 1 VIDEO 2
IN
IN
OUT
IN
ANALOG
OUT
6CH PREOUT
SUBWOOFER
TO SW-S100
(U.S.A. model)
Coaxial cable
Audio pin cable
OUTPUT
S Video cable
S VIDEO
Optical cable
OPTICAL
Optical cable
INPUT
COAXIAL
OPTICAL
AUDIO
AUDIO
Audio/Video cable
VIDEO
English
OUTPUT
AUDIO
L
L
L
R
R
R
Audio pin cable
TV/digital TV/cable TV
CD recorder or MD recorder
15
104_S100_10-20_EN
15
02.5.13, 1:28 PM
CONNECTIONS
Connecting the antennas
Both AM and FM indoor antennas are included with this
unit. In general, these antennas should provide sufficient
signal strength.
Connect each antenna correctly to the designated
terminals.
■ Connecting the AM loop antenna
1
Set up the AM loop antenna, then connect it.
2
Press and hold the tab to insert the AM loop
antenna lead wires into the AM ANT and
GND terminals.
■ Connecting indoor FM antenna
Connect the included indoor FM antenna to the FM ANT
terminal.
Indoor FM antenna
(included)
AM loop antenna
(included)
Bare wire
Tab
FM ANT
GND – AM ANT
75ΩUNBAL.
Ground (GND terminal)
For maximum safety and
minimum interference, connect
the antenna GND terminal to a
good earth ground. A good earth
ground is a metal stake driven into
moist earth.
3
Release the tab. (The tab will return to its
original position when you release your
finger.)
Once connected, pull the wires gently to check that
they are connected securely.
4
Orient the AM loop antenna for the best
reception.
y
• A properly installed outdoor antenna provides clearer reception
than an indoor one. If you experience poor reception quality, an
outdoor antenna may improve the quality. Consult the nearest
authorized YAMAHA dealer or service center about the
outdoor antennas.
Notes
• The AM loop antenna should be placed away from this unit.
• The AM loop antenna should always be connected, even if an
outdoor AM antenna is connected to this unit.
16
CONNECTIONS
Connecting the speakers
Connect the included speakers to the DVD AUDIO/VIDEO receiver (DVR-S100) using the included speaker cables and
system connector cables as shown below.
DVD Audio/Video receiver (DVR-S100)
IN
IN
VIDEO 1
VIDEO 2
OUT
VIDEO
IN
OUT
IN
IN
IN
As this terminal is used for testing at the
factory, do not connect any equipment to this
terminal.
OUT
OUT
GND – AM ANT
S VIDEO
MONITOR MONITOR
MD/CD-R
MD/CD-R
VIDEO 1 MD/CD-R
[B]
[A]
COAXIAL
IN
OPTICAL
IN
VIDEO 1 VIDEO 2
VCR
FRONT
REAR
CENTER
SYSTEM
CONNECTOR
MARK
L
OPTICAL
OUT
VCR
PREPARATION
FM ANT
75ΩUNBAL.
R
IN
IN
IN
OUT
IN
OUT
6CH PREOUT
SUBWOOFER
ANALOG
DIGITAL
*1 Insert the plug with its
TO SW-S100
*1
mark facing up.
Front speaker (R)
(NX-S100S)
Front speaker (L)
(NX-S100S)
(RED)
(WHITE)
System connector cable
*1
Speaker cable (RED)
FRONT R
Speaker cable (WHITE)
FRONT L
SPEAKERS
FRONT
CENTER
FRONT
R
MARK
L
(RED)
Speaker cable (GREEN)
CENTER
(WHITE)
(GREEN)
R
(GRAY)
SYSTEM
CONNECTOR
TO DVR-S100
REAR
(SURROUND)
Center speaker (NX-S100C)
L
(BLUE)
DO NOT CONNECT THIS UNIT TO
SPEAKERS OTHER THAN NX-S100C
AND NX-S100S.
(GREEN)
Speaker cable (BLUE)
REAR L
Speaker cable (GRAY)
REAR R
(GRAY)
(BLUE)
Subwoofer (SW-S100)
Rear speaker (R)
(NX-S100S)
Rear speaker (L)
(NX-S100S)
English
17
CONNECTIONS
(RED)
■ Using commercially available
speakers and speaker cables
The back of the
Subwoofer
(RED)
Connector
Color tube
(RED)
(BLUE)
Connector
Color tube
(BLUE)
(BLUE)
You can use commercially available speaker cables and
speakers except for a subwoofer. If you use them, note the
following.
• Use the speaker whose impedance is 6Ω or higher.
When using the speaker whose impedance is lower than
6Ω, the protection circuit may start working or this unit
may be damaged.
• Use magnetically shielded speakers. If this type of
speakers still creates the interference with the monitor,
place the speakers away from the monitor.
• Use the speaker cable that is as thick as the included
cable. Too thick cables cannot be used.
Exchanging the speaker cables
2
Tab
y
• The connector of the included speaker cable and the terminal of
the subwoofer are classified by color. Connect the same colors.
• The label of the speaker is attached to each speaker cable.
Connect the speakers in accordance with the labels.
• Connect the color tube of the speaker cable to the plus (+) side
of each speaker. If the polarity of the speaker connections is
incorrect, the sound will be unnatural and lack bass.
• A cover is attached to the end of the speaker cable. Connect the
speakers after removing the cover.
• Make sure that the plugs of the system connector cable and the
connectors of the speaker cables are inserted correctly before
inserting them.
3
1
15 mm
4
Notes
• Do not let the bare speaker wires touch each other or any metal
part of this unit. This could damage this unit and/or the
speakers.
• Do not insert the plug or connector forcibly. Doing so may
damage the plug, connector or terminal.
• Do not scratch, forcibly bend, or pull the system connector or
speaker cable as this may damage the cable, causing loss of
audio output, and may possibly result in a fire or electric shock.
Take particular care in making sure that the cable is not
squashed by a rack or caster.
• Before disconnecting or connecting the system connector
cable, disconnect the power supply cord of the subwoofer and
DVD audio/video receiver.
18
1
Remove approximately 15 mm (9/16”) of
insulation from each of the speaker cables.
Twist the exposed wires of the cable together to
prevent short circuits.
2
3
Open the tab.
4
Return the tab to secure the wire.
Pull the inserted bare wire of the speaker
cable from the connector and insert the bare
wire of the commercially available speaker
cable.
CONNECTIONS
Connecting to an external
amplifier
Note
• When you have connected this unit to an external amplifier,
select PRE in “9 SP/PRE OUT” on the SET MENU. (See page
63.)
1 FRONT jacks
Front channel line output jacks.
2 REAR jacks
Rear channel line output jacks.
3 CENTER jack
Center channel line output jack.
4 SUBWOOFER jack
Low bass signals distributed from the front, center and/or
rear channels are directed to this jack if they are assigned
to this jack. (The cut-off frequency of this jack is 90 Hz.)
The LFE (low-frequency effect) signals generated when
Dolby Digital or DTS is decoded are also directed if they
are assigned to this jack.
Plug in this unit to the wall outlet.
■ Memory back-up
The memory back-up circuit prevents the stored data from
being lost when the power cord is disconnected from the
AC outlet, or the power supply is temporarily cut due to
power failure. However, if the unit is turned off for more
than one week, the stored setting will be cleared. If so, set
the setting again.
• Volume level
• Input source
• Speaker output level (center, rear L/R and subwoofer)
• Sleep timer
• Parameter
• Delay time
• Set menu
• Disc direct
• Preset station
Turning on the power
When all connections are complete, turn on the power of
this unit.
STANDBY/ON
1
2
FRONT
REAR
PREPARATION
If you want to increase the power output to the speakers,
or want to use another amplifier, connect an external
amplifier to the 6CH PREOUT jacks as follows.
Connecting the AC power cord
STANDBY/ON
CENTER
3
4
6CH PREOUT
SUBWOOFER
POWER
TV
y
POWER
AV
SLEEP
POWER (
)
TV MODE
INPUT
• The adjustments made in the following settings have an effect
on the signals output from the 6CH PREOUT jacks.
– BASS BOOST settings
– Speaker settings
– DSP programs
CH
TUNER
VOL
MUTE
MD
CD–R
AUDIO
SUBTITLE
VCR
REC
VIDEO 2
VIDEO 1
CODE SET
CD
SHIFT
DVD
AMP
HALL
JAZZ
ROCK
ENTERTAINMENT
1
2
3
4
1
Press STANDBY/ON (POWER ( ) on the
remote control) to turn on the power of this
unit.
2
Turn on the video monitor connected to this
unit.
Note
19
English
• When you use only some of the included 6 speakers or when
using commercially available speakers, adjust speaker mode
settings soon after turning the power on. See “1 SPEAKER
SET (speaker mode settings)” on page 60 for details.
ADJUSTING SPEAKER OUTPUT LEVELS
This section explains how to adjust speaker output levels
using the test tone generator. When this adjustment is
complete, the output level heard at the listening position
should be the same from each speaker. This is important
for best performance of the digital sound field processor,
and the various decoders (Dolby Digital, Dolby Pro
Logic, Dolby Pro Logic II and DTS).
LEFT
SUBWOOFER
RIGHT
CENTER
Note
• Since this unit cannot enter the test mode while headphones are
connected to this unit, be sure to unplug the headphones from
the
SILENT jack when using the test tone.
L SUR.
Using the test tone
4
Use the test tone to balance the output levels of the
speakers.
Note
• The adjustment of each speaker output level should be made at
your listening position using the remote control.
CD
SHIFT
DVD
AMP
ROCK
ENTERTAINMENT
HALL
JAZZ
1
2
3
4
SPORTS
SETUP
MONO MOVIE
ANGLE
MOVIE 1
MARKER
MOVIE 2
5
6
7
8
PLAY MODE
SELECT
REPEAT
MATRIX 6.1
A–B
STEREO
0
>
–10
/DTS
9
TOP MENU
LEVEL
GROUP
MENU
SET MENU
PRESET
j, i
CH
• To adjust the level of the front speakers, use VOL +/– on
the remote control.
TEST
ON SCREEN
5
CANCEL
y
PAGE
CH
VOL + / –
B. BOOST
RETURN
VOL
(U.S.A. model)
1
2
3
20
When adjustment is complete, press TEST to
stop the test tone.
MUTE
PRESET
TEST
AMP
ABCDE
ENTER
Adjust the level of the effect speakers using
j/ i so that it matches the level of the front
speakers.
While adjusting, the test tone is heard from the
selected speaker.
Note
VIDEO 1
CODE SET
R SUR.
Press AMP.
Press TEST to output the test tone.
Press VOL +/– to adjust the volume of this
unit so you can hear the test tone.
The test tone is heard (in order) from the LEFT
(front left speaker), CENTER (center speaker),
RIGHT (front right speaker), R SUR. (rear right
speaker), L SUR. (rear left speaker), and the
SUBWOOFER (subwoofer). The tone is produced
for about 2 seconds from each speaker.
• It is not necessary to readjust the speaker levels once they are
set (as long as you do not change the speakers). You can enjoy
listening to or watching the input source at the desired volume
simply by pressing VOL +/– on the remote control.
• If the output level of the effect speakers (center, rear left, and
rear right) cannot be increased enough to match the level of the
front speakers, set “1E F. Level” on SET MENU to –10 dB (see
page 61). This setting decreases the front speaker output level
to about one-third of the normal level. After you have set “1E F.
Level” on the SET MENU to –10 dB, adjust the levels for the
center and rear speakers again.
Notes
• If “1A CENTER” on the SET MENU is set to NON and the
center speaker is not connected, the center channel sound is
automatically output from the front left and right speakers.
• If “1C REAR LR” on the SET MENU is set to NON, the
output level of the rear left and right speakers cannot be
adjusted in step 4. The test tone will be circulated skipping the
rear right and left speakers.
• If “1D BASS” on the SET MENU is set to FRONT, the test
tone will be circulated skipping the subwoofer.
BASIC PLAYBACK
5
Basic operations
You can play the software loaded on the audio and video
components connected to this unit.
Note
POWER
AV
SLEEP
POWER (
)
TV MODE
INPUT
TUNER
CH
VOL
MD
MUTE
CD–R
AUDIO
SUBTITLE
VCR
REC
VIDEO 2
Input selector
buttons
VIDEO 1
CODE SET
CD
SHIFT
DVD
AMP
ROCK
ENTERTAINMENT
HALL
DSP program
buttons
JAZZ
1
2
3
4
SPORTS
SETUP
MONO MOVIE
ANGLE
MOVIE 1
MARKER
MOVIE 2
5
/DTS
6
7
8
PLAY MODE
SELECT
REPEAT
MATRIX 6.1
A–B
STEREO
0
>
–10
CANCEL
9
GROUP
TOP MENU
LEVEL
MENU
SET MENU
PRESET
CH
■ Enhancing the bass tones
Press B. BOOST.
• “Bass Boost ON” appears in the display.
• This function enhances the bass tones of the
subwoofer by increasing the level of the low-range
frequencies.
• To cancel B. BOOST mode, press B. BOOST
again.
PAGE
MUTE
ABCDE
ENTER
• If you have connected a recording component to the VCR
OUT, or MD/CD-R OUT jacks, and you notice distortion or
low volume during playback of other components, try turning
the recording component on.
MUTE
CH
VOL + / –
PRESET
B.BOOST
TEST
ON SCREEN
B. BOOST
RETURN
USING BASIC FUNCTIONS
POWER
TV
SLEEP
Adjust the volume to the desired level.
The volume level is displayed digitally.
Example:
–70 dB
Control range: VOLUME MUTE (minimum) to
0 dB (maximum)
VOL
y
(U.S.A. model)
Indication on the front panel display (example):
SP
VIDEO 1
VIDEO 1 AUTO
Selected input source
Input mode
1
2
Press POWER (
3
Press INPUT H/G on the front panel
repeatedly (one of the input selector buttons
on the remote control) to select the input
source.
The selected input source name and input mode
appear on the front panel display for a few seconds.
4
Start playback or select a broadcast station
on the source component.
Refer to the operation instructions for the
component.
• The B. BOOST mode does not function when the headphones
are connected.
Note
• If a thudding noise is heard from the subwoofer when this
function is turned on, lower the subwoofer level. Otherwise, the
subwoofer may be damaged due to an excessive input level of
low-bass signal.
■ To mute the sound
Press MUTE on the remote control.
To resume the audio output, press MUTE again.
) to turn on the power.
Turn on the A/V component connected to
this unit.
y
• You can also cancel mute by pressing VOL +/–, etc.
• During muting, the “MUTE” indicator flashes on the front
panel display.
English
21
BASIC PLAYBACK
■ When you have finished using
this unit
Press STANDBY/ON on the front panel (POWER (
on the remote control) to set this unit in the standby
mode.
y
)
■ Setting the sleep timer
Use this feature to automatically set this unit in the
standby mode after the amount of time you have set. The
sleep timer is useful when you are going to sleep while
this unit is playing or recording a source.
• When AUTO is selected, this unit automatically determines the
type of signal. If this unit detects a Dolby Digital or DTS
signal, the decoder automatically switches to the appropriate
setting.
• Each time you turn on the power of this unit, the input mode is
set according to “8 INPUT MODE” setting on the SET MENU
(see page 63 for details).
Notes
• By connecting a commercially available timer to this unit, you
can also set a wake-up timer. Refer to the operation instructions
of the timer.
• When playing a disc encoded with Dolby Digital or DTS on
some LD players, the sound output delays for a moment when
playback resumes after a search because the digital signal is
selected again.
• When playing a LD source that has not been digitally recorded,
the sound may not be output for some LD players. In this case,
set the input mode to ANALOG.
(While playing a source)
Notes on playing DTS-CD/LDs
y
Press SLEEP repeatedly to set the amount of
time.
Each time you press SLEEP, the front panel display
changes as shown below.
The “SLEEP” indicator lights up on the front panel
display soon after the sleep timer has been set.
The display then returns to the previous indication.
Canceling the sleep timer
Press SLEEP repeatedly until “SLEEP OFF”
appears on the front panel display.
After a few seconds, “SLEEP OFF” disappears, the
“SLEEP” indicator goes off and the display returns
to the previous indication.
y
• The sleep timer setting can also be canceled by setting this unit
in the standby mode by using POWER ( ) on the remote
control (or STANDBY/ON on the front panel) or by
disconnecting the AC power cord from the AC outlet.
■ Input modes and indications
This unit comes with a variety of input jacks. You can
select the type of input signals you desire.
Press INPUT MODE (the input selector button that you
have pressed to select the input source on the remote
control) repeatedly until the desired input mode is shown
on the front panel display.
• AUTO:
In this mode, the input signal is selected
automatically as follows:
1) Digital signal
2) Analog signal
• DTS:
In this mode, only the digital input signal
encoded with DTS is selected.
• ANALOG: In this mode, only the analog input signal is
selected.
22
• If the digital output data of the player has been
processed in any way, you may not be able to perform
DTS decoding even if you make a digital connection
between this unit and the player.
• If you play a source encoded with a DTS signal and set
the input mode to ANALOG, this unit may reproduce
the noise of an unprocessed DTS signal. In this case,
connect the source to a digital input jack and set the
input mode to AUTO or DTS.
• If you switch the input mode to ANALOG while
playing a source encoded with a DTS signal, this unit
reproduces no sound.
• If you play a source encoded with a DTS signal with
the input mode set to AUTO;
– This unit automatically switches to the DTSdecoding mode (The “t” indicator lights up) after
having detected the DTS signal. When playback of
the DTS source is completed, the “t” indicator
may flash. While this indicator is flashing, only DTS
source can be played. If you want to play a normal
PCM source soon, set the input mode back to AUTO.
– When the input mode is set to AUTO and a search or
skip operation is performed during playback of a
DTS source, the “t” indicator may flash. If this
status continues for longer than 30 seconds, this unit
will automatically switch from “DTS-decoding”
mode to PCM digital signal input mode. The “t”
indicator will turn off.
BASIC PLAYBACK
Selecting a sound field program
This unit’s built-in DSP (Digital Sound field Processor) can simulate various acoustic environments, including a concert
hall and movie theater, with its 9 sound field programs. For the best results, choose a program appropriate for the
selected audio source.
VIDEO 1
CODE SET
CD
SHIFT
DVD
AMP
HALL
JAZZ
ROCK
ENTERTAINMENT
1
2
3
4
SPORTS
SETUP
MONO MOVIE
ANGLE
MOVIE 1
MARKER
MOVIE 2
5
/DTS
7
8
REPEAT
MATRIX 6.1
A–B
STEREO
0
>–10
9
TOP MENU
LEVEL
GROUP
MENU
SET MENU
PRESET
CH
d
CANCEL
PAGE
MUTE
STEREO
MATRIX6.1
ABCDE
ENTER
1
2
Press AMP.
3
After selecting the desired program, press
the same button repeatedly to select the
desired sub-program if available.
CH
PRESET
TEST
ON SCREEN
B. BOOST
RETURN
VOL
Press one of the DSP program buttons on
the remote control to select the desired
program.
y
• You can also select DSP program by pressing DSP H/G on the
front panel.
• Select the DSP program that you feel sounds best regardless of
the name and description given for it below.
(U.S.A. model)
Indication on the front panel display (example):
Program name
SP
USING BASIC FUNCTIONS
/DTS
SELECT
6
PLAY MODE
SELECT
AMP
DSP program
buttons
DVD/CD
MOVIE THTR 1
70mm Spectacle
Sub-program name
■ Feature of DSP programs
Hi-Fi DSP (for music sources)
No.
Program
Features
1
CONCERT HALL
A large round concert hall with a rich surround effect. Pronounced reflections from all directions
emphasize the extension of sounds. The sound field has a great deal of presence, and your
virtual seat is near the center, close to the stage.
2
JAZZ CLUB
This is the sound field at stage front in “The Bottom Line”, a famous New York jazz club, that
seats up to 300 people. Its wide left to right seating arrangement offers a real and vibrant sound.
3
ROCK CONCERT
The ideal program for lively, dynamic rock music. The data for this program was recorded at
LA’s “hottest” rock club. The listener’s virtual seat is at the center-left of the hall.
4
ENTERTAINMENT/
Disco
This program recreates the acoustic environment of a lively disco in the heart of a big city. The
sound is dense and highly concentrated. It is also characterized by a high-energy, “immediate”
sound.
ENTERTAINMENT/
5ch Stereo
Using this program increases the listening position range. This is a sound field suitable for
background music at parties, etc.
English
23
BASIC PLAYBACK
No.
STRAIGHT
DECODE
CINEMA-DSP
(for cinema sources)
CINEMA-DSP
(for video sources)
4
Program
Features
ENTERTAINMENT/
Game
This program adds a deep and spatial feeling to video game sounds.
ENTERTAINMENT/
Concert Video
This program produces an enthusiastic atmosphere and lets you feel as if you are at an actual
jazz or rock concert.
5
TV SPORTS
With this program, you can enjoy watching various TV programs such as news, variety shows,
music programs or sports programs. In a stereo broadcast of a sports game, the commentator is
oriented at the center position, and the shouts and the atmosphere in the stadium spread on the
surround side, while their spread to the rear is properly restrained.
6
MONO MOVIE
This program is provided for reproducing monaural video sources (such as old movies). The
program produces the optimum reverberation to create sound depth by using only the presence
sound field.
7
MOVIE THEATER 1/
Spectacle
This program creates the extremely wide sound field of a 70-mm movie theater. It precisely
reproduces the source sound in detail, making both the video and the sound field incredibly real.
This is ideal for any kind of video source encoded with Dolby Surround, Dolby Digital or DTS
(especially large-scale movie productions).
MOVIE THEATER 1/
Sci-Fi
This program clearly reproduces dialog and sound effects in the latest sound form of science
fiction films, thus creating a broad and expansive cinematic space amid the silence. You can
enjoy science fiction films in a virtual-space sound field that includes Dolby Surround, Dolby
Digital and DTS-encoded software employing the most advanced techniques.
MOVIE THEATER 2/
Adventure
This program is ideal for precisely reproducing the sound design of the newest 70-mm and
multichannel soundtrack films. The sound field is made to be similar to that of the newest movie
theaters, so the reverberations of the sound field itself are restrained as much as possible.
MOVIE THEATER 2/
General
This program is for reproducing sounds from 70-mm and multichannel soundtrack films, and is
characterized by a soft and extensive sound field. The presence sound field is relatively narrow.
It spatially spreads all around and toward the screen, restraining the echo effect of conversations
without losing clarity.
9
q/DTS/ENHANCED
This program ideally simulates the multi-surround speaker systems of the 35-mm film theaters.
Dolby Pro Logic and Dolby Pro Logic II decoding, Dolby Digital decoding or DTS decoding
and digital sound field processing create precise effects without altering the original sound
orientation.
The surround effects produced by this sound field wrap around the viewer naturally from the
back to the left and right, and toward the screen.
9
q/DTS/NORMAL
The built-in decoder precisely reproduces sounds and sound effects from sources. The highly
efficient decoding process improves crosstalk and channel separation and makes sound
positioning smoother and more precise.
In this program, no DSP effect is applied.
8
y
• When you set this unit in the standby mode, the current source and DSP program are memorized and are automatically selected when
you turn on the power again.
• When you select an input source, this unit automatically selects the last DSP program used with that source.
• The “
” indicator does not light up when selecting program No. 9 except in Enhanced mode.
Notes
• There are 9 programs with sub-programs available with this unit. However, the selection depends on the input signal format and not
all sub-programs can be used with all input signal formats.
• The acoustics of your listening room affect the DSP program. Minimize the sound reflections in your room to maximize the effect
created by the program.
• When a monaural source is being played with PRO LOGIC/Normal or PRO LOGIC/Enhanced, or PRO LOGIC II Movie, no sound
will be heard from the front speakers and the rear speakers. Sound can only be heard from the center speaker. (If “1A CENTER” on
the SET MENU is set to NON, the center channel sound is output from the front speakers.)
24
BASIC PLAYBACK
■ Table of Program Names for Each Input Format
This unit automatically chooses the appropriate decoder and DSP sound field pattern according to the input signal
format.
Input
No.
Program
2 channel
5.1 channel
6.1 channel *
ANALOG, PCM,
DOLBY DIGITAL, DTS
DOLBY DIGITAL
DTS
DOLBY DIGITAL
+ Matrix 6.1
DTS
+ Matrix 6.1
DGTL Spectacle
DTS Spectacle
Spectacle 6.1
Spectacle 6.1
MOVIE
THEATER 1
70 mm Spectacle
70 mm Sci-Fi
DGTL Sci-Fi
DTS Sci-Fi
Sci-Fi 6.1
Sci-Fi 6.1
8
MOVIE
THEATER 2
70 mm Adventure
DGTL Adventure
DTS Adventure
Adventure 6.1
Adventure 6.1
70 mm General
DGTL General
DTS General
General 6.1
General 6.1
9
DOLBY
DIGITAL
—
Normal
—
Matrix 6.1
—
—
Enhanced
—
Enhanced 6.1
—
DTS DIGITAL
SUR
—
—
Normal
—
Matrix 6.1
—
—
Enhanced
—
Enhanced 6.1
Normal
—
—
—
—
Enhanced
—
—
—
—
Movie
—
—
—
—
Music
—
—
—
—
PRO LOGIC
PRO LOGIC II
USING BASIC FUNCTIONS
7
* means the Matrix 6.1 decoder is ON.
y
• If Dolby Digital Surround EX software or DTS ES software is played when AUTO is selected by pressing the MATRIX 6.1 button on
the remote control, the Dolby Digital + Matrix 6.1 or DTS + Matrix 6.1 decoder usually turns on and the corresponding DSP
program is selected.
• MATRIX 6.1 on the remote control can be used to play Dolby Digital or DTS 5.1 channel sources with the virtual rear center
speaker. In this case the program name changes to the corresponding name for 6.1 channel.
• When playing a 6.1 channel source with MATRIX 6.1 on the remote control turned off, the program name changes to the
corresponding name for 5.1 channel.
English
25
BASIC PLAYBACK
■ Selecting PRO LOGIC II
You can enjoy the 2-channel sources decoded into five
discrete channels by selecting PRO LOGIC II in program
No. 9.
(While playing a 2-channel source)
1
2
Press AMP.
3
Press SELECT repeatedly to select the
decoder, PRO LOGIC II.
4
After selecting on the decoder (PRO LOGIC
II), select the mode appropriate for the
source by pressing q/DTS.
The selection switches as follows;
PRO LOGIC II Movie ↔ PRO LOGIC II Music
Press q/DTS.
The previously selected sub program appears on the
front panel display.
y
• You can select PRO LOGIC, PRO LOGIC II Movie, and PRO
LOGIC II Music by pressing DSP H/G on the front panel
repeatedly.
Note
• Playback using DOLBY PRO LOGIC II decoders is possible
only for 2-channel signals.
■ Playing Dolby Digital Surround
EX or DTS ES software
Press MATRIX 6.1 to turn on the Dolby Digital + Matrix
6.1 or DTS + Matrix 6.1 decoder.
The rear center channel is created from rear left and right
channels, and output from virtual rear center speaker.
The display changes AUTO ^ Matrix6.1 ^ OFF each
time the MATRIX 6.1 button is pressed.
• AUTO:
This mode automatically switches Dolby
Digital + Matrix 6.1 and DTS + Matrix 6.1
depending on the signal. Virtual rear center
speaker does not work for 5.1 channel
sources.
• Matrix6.1: This setting produces 6-channel playback
of the input source using the Matrix 6.1
decoder. The virtual rear center speaker can
be used when playing a 5.1-channel source.
• OFF:
Virtual rear center speaker does not work in
this setting.
y
• When the Matrix 6.1 decoder is functioning, the “MATRIX”
indicator lights up on the front panel display.
26
Notes
• Some Dolby Digital Surround EX or DTS ES software may not
contain the signal that is necessary for this unit to switch to the
Matrix 6.1 decoding mode. To turn on the Matrix 6.1 decoder
when playing such a source, select “Matrix6.1”.
• Playing a 6.1-channel source is not possible even if
MATRIX6.1 is pressed in the following cases:
– when “1C REAR LR” in the SET MENU is set to NON;
– when the sound effect is turned off;
– when headphones are connected;
– when a Dolby Digital KARAOKE source is being played;
– when 5ch Stereo is selected.
• The setting becomes AUTO once this unit turns into standby
mode.
■ Virtual CINEMA DSP
With Virtual CINEMA DSP, you can enjoy all DSP
programs without rear speakers. It creates virtual speakers
to reproduce a natural sound field.
You can listen to virtual CINEMA DSP by setting “1C
REAR LR” in the SET MENU to NON. Sound field
processing changes to VIRTUAL CINEMA DSP
automatically.
y
• When virtual CINEMA DSP is functioning, the “VIRTUAL”
indicator lights up on the front panel display.
Note
• This unit is not set in the virtual CINEMA DSP mode even if
“1C REAR LR” is set to NON in the following cases:
– when the 5ch Stereo, DOLBY DIGITAL Normal, Pro Logic
Normal, Pro Logic II, or DTS Normal program is selected;
– when the sound effect is turned off;
– when 96-kHz sampling digital signals are input to this unit;
– when using the test tone; or
– when connecting the headphones.
BASIC PLAYBACK
■ SILENT CINEMA DSP
• Format:
The type of an input signal. When digital input is not known,
the mode is set to the analog mode.
Input signal
Analog signal
Analog
PCM signal
PCM
Dolby Digital signal
DTS signal
• When SILENT CINEMA DSP is functioning, the “SILENT”
indicator lights up on the front panel display.
Unknwn Digital
(Unknown Digital)
fs:
The sampling frequency of an input signal when a digital signal
is input. If the frequency is not known, “unknown” appears on
the front panel display.
• Audio Channels:
The number of audio channels included in an input signal when
a Dolby Digital or DTS signal is input.
• Rate (bit rate):
The amount of data contained in an input signal per second
when a Dolby Digital or DTS signal is input. If the bit rate is
not known, “unknown” appears on the front panel display.
• Flg (flag):
An identification signal contained in an input signal when a
Dolby Digital or DTS signal is input. If the flag is not detected,
“None” appears on the front panel display.
•
Notes
• This feature is not available when 96-kHz sampling digital
signals are input to this unit.
• The sound of LFE channel will be mixed and output from the
headphone.
■ Normal Stereo Reproduction
Press STEREO to turn off the sound effect for normal
stereo reproduction.
Press STEREO again to turn the sound effect back on.
Notes
• If you turn off the sound effects, no sound is output from the
center or rear speakers.
• The volume may be greatly reduced when you turn off the
sound effects or if you set “4 D. RANGE” on the SET MENU
to MIN. In this case turn on the sound effect.
• The sound of LFE channel will be directed to the front left and
right or the subwoofer (or both) channels depending on the
setting of “1D BASS” on the SET MENU.
• If you turn off the sound effects while a Dolby Digital or DTS
signal is being output, the dynamic range of the signal is
automatically compressed and the sounds of the center and rear
speaker channels are mixed and output from the front speakers.
■ Displaying the information about
input signal
During stereo reproduction, you can display information
such as the type, format and sampling frequency of the
signal input from the components connected to this unit.
(While playing a stereo source)
1
2
Dolby Digital
DTS
Other digital signals
y
Display
USING BASIC FUNCTIONS
You can enjoy a powerful sound field similar to what you
could expert from actual speakers with SILENT
CINEMA DSP. You can listen to SILENT CINEMA DSP
SILENT jack
by connecting your headphones to the
while the digital sound field processor is on. Enjoy all the
DSP program using the headphones. The “SILENT”
indicator lights up on the front panel display. (When
sound effects are off, you listen to the source with normal
stereo reproduction.)
y
■ Notes on 96-kHz sampling digital
signals
The digital input jacks of this unit can handle 96-kHz
sampling digital signals. Note the following when 96-kHz
sampling digital signal is input to this unit:
– DSP programs cannot be selected.
– Sound will be output as 2-channel stereo from only the
front left and right speakers. (There may be sound
output from the subwoofer depending on the
SPEAKER MODE settings on the SET MENU.)
Therefore, the level of the effect speakers cannot be
adjusted while listening to such a source.
Press AMP.
Press d to display the information about the
input signal.
English
27
105_S100_21-28_EN
27
02.5.13, 1:30 PM
RECORDING
Recording adjustments and other operations are
performed from the recording components. Refer to the
operation instructions for these components.
1
Turn on the power of this unit and all
connected component.
2
Select the source component you want to
record from.
The procedure for selecting an input source is the
same as the one described in “BASIC PLAYBACK”
on page 21.
3
Start playback (or select a broadcast station)
on the source component.
4
Start recording on the recording component.
Notes
• Do a test recording before you start an actual recording.
• When this unit is set in the standby mode, you cannot record
between the components connected to this unit.
• The setting of BASS BOOST, VOLUME, “5 L/R BALANCE”
on the SET MENU and DSP programs does not effect the
recorded material.
• A given input source is not output to the same OUT (Rec)
channel. (For example, the signal input from VCR IN is not
output to VCR OUT.)
• Check the copyright laws in your country to record from
records, CDs, radio, etc. Recording of copyrighted material
may infringe copyright laws.
• It is not possible to record the sound effect created by this
unit’s DSP processing.
• While recording video images played during the DVD mode,
do not display ON-SCREEN menu. If displayed, the menu will
be also recorded.
• During digital recording, Karaoke vocal and Cinema dialog
functions do not work. (See pages 35 and 36.)
If you playback a video source that uses scrambled or
encoded signals to prevent it from being dubbed, the
picture itself may be disturbed due to those signals.
28
■ Special considerations when
recording DTS software
Attempting to digitally record the DTS bitstream will
result in noise being recorded.
■ Timer playback/recording
This unit can perform playback or recording with an
external timer (not supplied). Refer to the operating
instructions for the component and the timer to be used.
Notes
• Stored data, such as input source, will be reflected when
playback or recording with the timer.
• If you do not want any sound output when recording with a
timer, turn the volume down.
DISC INFORMATION
Types of disc that this unit can
play
This unit is designed for use with following types of disc
only. Never attempt to load any other type of disc into this
unit because it may damage this unit.
In this manual, the type of discs are indicated as below.
DVD-Video
DVD-Audio
Video CD
Audio CD
DVD-V
DVD-A
VCD
CD
Notes
• This unit is not compatible with Photo-CD, CD-ROM, DVDROM, DVD-RAM, SVCD, CDV, etc. (some DVD-R, DVDRW and DVD+RW can be played).
• Be sure to use only discs made by reliable manufacturers.
Some discs cannot be played depending on the disc
characteristics or recording conditions.
• Do not use any non standard shaped discs (heart, etc.).
This unit is designed to meet DVD standard that supports
region management system. Check the regional code
number marked on the disc packages. If the number does
not match this unit’s region number (see the table shown
below or the back of this unit), this unit refuses to play
that disc.
Model
Region
number of
this unit
Discs can be
played
U.S.A. and Canada
models
“1”
“1”, “ALL” or a
mark which includes
the region number
“1”.
U.K. and Europe
models
“2”
“2”, “ALL” or a
mark which includes
the region number
“2”.
Australia model
“4”
“4”, “ALL” or a
mark which includes
the region number
“4”.
General model
“3”
“3”, “ALL” or a
mark which includes
the region number
“3”.
PLAYING A DISC
DIGITAL VIDEO
Region management information
Notes about handling discs
• Hold discs by touching only the edges or center hole.
• Some DVD and VCD features described in this manual may
not be available or may operate in a different way because they
are subject to software producer’s design. Check each disc’s
instruction.
• This unit cannot play the video parts of a disc whose video
signal type is PAL. (U.S.A. and Canada models only)
• When a disc is not currently being loaded on the disc
tray, store it in an appropriate case.
• Do not use a disc printed on its surface by a
commercially available label printer.
• Do not expose discs to direct sunlight, high temperature
or high humidity for a long period of time, because
these might warp or otherwise damage the disc.
NO!
English
29
DISC INFORMATION
• Playback of discs is generally not affected by small
particles of dust or fingerprints on their playing surface.
Even so, they should be kept clean. Wipe by using a
clean, dry cloth. Do not wipe with a circular motion;
wipe straight outward from the center.
Starting play from a selected chapter
Select a chapter using the numeric buttons (see “To select
a specific track” on page 33) and press ENTER.
Repeat play
You can use chapter repeat or title repeat. (See page 45.)
On-screen icons for disc information during play
Total chapter number
C
1/ 59
Current chapter
• Do not try to clean the disc’s surface by using any type
of disc cleaner, record spray, anti-static spray or liquid,
or any other chemical-based liquid, because such
substances might irreparably damage the disc’s surface.
MP3 playback
This unit can play MP3 format audio recorded for
personal use with a computer etc. onto CD-R or CD-RW.
Play may not be possible in some cases due to the
condition of the recording.
Discs recorded using MP3 differ from CDs in the
following ways.
Structure of the disc (example)
Since the MP3 format can store several albums on a disc,
a folder is assigned to a “Title”, and a file is assigned to a
“Chapter”.
Root directory
: Title (Folder)
: Chapter (File)
30
0 : 01
Elapsed play time (display only,
you cannot use “time index”
feature.)
y
• The following settings are recommended.
– The bit rate 128kbps
(The bit rates ranging from 32kbps to 320kbps are accepted.)
– The sampling frequency 44.1kHz
(The sampling frequency 32kHz is not accepted.)
Note
• Chapters may not be played in the order that you arranged
them when recording.
REMOTE CONTROL (DVD MODE)
This section explains how each button on the remote
control functions when you play a disc. Press DVD first
when using this unit as a DVD player.
• The buttons on the remote control whose names are
written in green are operation buttons when you
operate this unit in the DVD mode.
• When pressing any of 79tyuiop while
pressing SHIFT, these buttons function to operate this
unit as a DVD player.
TV
SLEEP
q u, d, j, i/ENTER
Use to select and determine an item on menu screen, etc.
TV MODE
INPUT
CH
TUNER
VOL
MUTE
1
2
3
4
5
SHIFT
6
7
8
9
MD
e
w ON SCREEN
Press to turn the on-screen icons on and off on the video
monitor.
r
e AUDIO (P.41)
DVD mode
r e r (P.33)
CD–R
AUDIO
SUBTITLE
VCR
REC
VIDEO 2
VIDEO 1
CODE SET
CD
SHIFT
DVD
AMP
HALL
JAZZ
ROCK
ENTERTAINMENT
1
2
3
4
SPORTS
SETUP
MONO MOVIE
ANGLE
MOVIE 1
MARKER
MOVIE 2
5
/DTS
6
7
8
PLAY MODE
SELECT
REPEAT
MATRIX 6.1
A–B
STEREO
0
>
–10
CANCEL
9
0
q
w
TOP MENU
LEVEL
GROUP
MENU
SET MENU
PRESET
CH
9 PLAY MODE
Press to switch among random play, program play, and
normal play.
0 TOP MENU
Press to display a disc menu screen.
POWER
AV
8 Numeric buttons/CANCEL
Press to enter numbers./Press to cancel a specific mode or
a setting.
PAGE
MUTE
a
ABCDE
ENTER
t
y
u
i
o
p
PLAYING A DISC
POWER
7 SETUP
Press to call up the setup menu screen.
t ANGLE (P.41)
y MARKER (P.44)
u REPEAT (P.45)
i A-B (P.46)
o GROUP (P.39)
CH
p PAGE (P.40)
PRESET
TEST
ON SCREEN
B. BOOST
RETURN
VOL
(U.S.A. model)
s
a MENU
Press to call up menu screen contained in the disc.
s RETURN
Press to go back to the previous screen when operating in
the menu screen.
1 SUBTITLE
Press to select a subtitle language.
2 d
Press to pause.
3 t y (P.33)
4 w
Press to start playback.
5 a
Press to stop playback.
English
6 v
Press to open and close the disc tray.
31
PLAYING A DISC
■ To stop playback
Basic operation
Press a.
STANDBY/ON
v
Resume function
w
This unit memorizes where a was pressed as long as this
unit is turned on (W indicator flashes on the display).
When you press w in this status, playback resumes from
where it was stopped.
To clear the memory, press a once more so that the W
indicator goes off. (When a DVD-Video disc is played, a
chapter review screen appears.)
STANDBY/ON
A/B/C/D/E
PRESET/BAND
P
Note
• Opening the disc tray cancels the resume function.
Chapter review function
DVD-V
This function plays the first few seconds of each chapter
from the beginning of the title up to the memorized point
so that you can review previous chapters.
Press w while the message for chapter review is displayed
on the screen.
POWER
TV
POWER
AV
SLEEP
POWER (
)
INPUT
CH
TUNER
VOL
MUTE
MD
CD–R
AUDIO
SUBTITLE
VCR
REC
■ After operation
VIDEO 2
w
a
VIDEO 1
Remove the disc by pressing v and then press
STANDBY/ON on the front panel or POWER(
remote control.
CD
CODE SET
SHIFT
v
DVD
AMP
HALL
JAZZ
ROCK
ENTERTAINMENT
1
2
3
4
(U.S.A. model)
1
Press STANDBY/ON on the front panel or
POWER ( ) on the remote control to turn
the power on.
2
3
4
Press v to open the disc tray.
Load a disc.
Press w.
The disc tray closes and playback starts.
y
• When a menu screen appears DVD-A
See “Using a disc’s menu” on page 38.
DVD-V
VCD :
Notes
• When this unit finishes playing a DVD, this unit stops playback
or shows the menu screen.
• This unit cannot play a CD-R or CD-RW disc unless the disc
has been finalized. Please make sure to finalize the disc on the
CD recorder before playing it on this unit.
32
Notes
• This function may not work with some DVDs.
• Canceling resume function will also clear the chapter review
function.
TV MODE
) on the
PLAYING A DISC
■ Search
POWER
TV
Press r (or e) on the remote control to search forward
(or backward).
or
Press and hold r/y (or t/e) on the front panel to
search forward (or backward).
POWER
AV
SLEEP
TV MODE
INPUT
CH
TUNER
VOL
MD
MUTE
AUDIO
SUBTITLE
d
t
e
CD–R
VCR
REC
VIDEO 2
SHIFT
1
y
y
r
• To increase the speed, press or keep pressing r, e on the
remote control repeatedly or keep pressing r/y, t/e on
the front panel.
VIDEO 1
CD
CODE SET
HALL
JAZZ
DVD
AMP
ROCK
ENTERTAINMENT
1
2
3
4
SPORTS
SETUP
MONO MOVIE
ANGLE
MOVIE 1
MARKER
MOVIE 2
5
/DTS
6
7
8
PLAY MODE
SELECT
REPEAT
MATRIX 6.1
A–B
STEREO
0
>
–10
CANCEL
GROUP
PAGE
9
TOP MENU
LEVEL
MENU
SET MENU
PRESET
CH
≥10
ABCDE
ENTER
CH
Note
• If you search forward or backward while a Dolby Digital or
DTS disc is played, the input mode is automatically switched
to the analog mode and cannot be switched to other modes.
PRESET
TEST
ON SCREEN
B. BOOST
RETURN
VOL
(U.S.A. model)
■ Pause
Press d.
To resume play, press w.
■ Skip
Press y (or t) on the remote control to skip forward
(or backward).
or
Press r/y (or t/e) on the front panel to skip
forward (or backward).
Press t on the remote control or t/e on the front
panel once for each chapter (track) to be skipped.
■ Frame advance/reverse
DVD-A
1
2
Note
• When playing a VCD with playback control (p.38), skip
operation may not function as described above.
■ To select a specific track
VCD
Example (to select track 17):
Press ≥10.
Press 1.
Press 7.
VCD
Press d during playback.
Press the cursor buttons (j, i).
• To return to normal play, press w.
• Each time you press the cursor buttons (j, i), or
when you keep pressing them, frames keep
advancing or reversing.
• Frames also advance when d is pressed.
• With some DVD-Audio discs, frames advance or
reverse only in the video parts.
CD
Enter a desired track number using numeric buttons.
To select a two-digit number, press ≥10 and then enter the
upper figure and the last figure successively.
1
2
3
DVD-V
PLAYING A DISC
j, i
MUTE
7
Note
• With Video CD, you cannot move backward.
■ Slow
1
2
DVD-A
DVD-V
VCD
Press d during playback.
Press r (or e) on the remote control.
or
Press and hold r/y (or t/e) on the
front panel.
• To return to normal play, press w.
• To increase the speed, press or keep pressing
r, e on the remote control repeatedly or keep
pressing r/y, t/e on the front panel.
Note
• With Video CD, you cannot move backward.
English
33
ON-SCREEN MENU
Icons for player menu has 4 different menu
bars as below. To switch the menu bar, press
the cursor buttons (u, d).
You can control various items using on-screen menu bar.
POWER
TV
POWER
AV
SLEEP
d Play menu
TV MODE
INPUT
CH
TUNER
VOL
MD
MUTE
d
CD–R
AB
AUDIO
SUBTITLE
w
a
VIDEO 1
CODE SET
IPB
CD
SHIFT
DVD
AMP
HALL
JAZZ
ROCK
ENTERTAINMENT
1
2
3
4
SPORTS
SETUP
MONO MOVIE
ANGLE
MOVIE 1
MARKER
MOVIE 2
5
/DTS
6
7
8
PLAY MODE
SELECT
REPEAT
MATRIX 6.1
A–B
STEREO
0
>
–10
CANCEL
GROUP
PAGE
9
TOP MENU
LEVEL
MENU
SET MENU
PRESET
CH
ENTER
TEST
ON SCREEN
OFF
Numeric buttons
BRIGHT
f Audio menu
SP OFF
MUTE
OFF
ABCDE
CH
g Video menu
PRESET
ON SCREEN
1 2 3 ✱✱
e Display menu
VIDEO 2
u, d , j, i
/ENTER
–––
OFF
VCR
REC
B. BOOST
RETURN
VOL
RETURN
N
(U.S.A. model)
Operating menu bar
1
Press ON SCREEN.
Each time ON SCREEN is pressed, the menu bar
changes as below.
2
Press the cursor buttons (j, i) to select the
item you wish to adjust.
The selected item is highlighted.
3
Press the cursor buttons (u, d, j, i) to
change setting.
• With some items, you need to press ENTER or i
to determine the setting.
• You can also use the numeric buttons when
entering numbers to select a chapter, etc.
a Icons for disc menu
T
2
C
1 : 46 : 50
2
Digital
1 ENG 3/2.1 ch
ON
1 ENG
■ To turn the screen off
b Icons for player menu
AB
OFF
–––
1
Press RETURN repeatedly.
1 2 3 ✱✱
Note
c Shuttle screen
• Some items cannot be accessed when the play is stopped.
+100
–100
Off
■ To change the menu bar position
When the menu bar does not appear properly, you can
adjust its position.
1
Select the rightmost icon ( ).
Example)
N
2
34
Press the cursor buttons (u, d) to move the
menu bar.
ON-SCREEN MENU
Icons for disc menu
eg) DVD-Video
T
C
2
2
1 : 46 : 50
Digital
1 ENG 3/2.1 ch
Title number
DVD-V
Track number
DVD-A VCD
T
2
ON
1 ENG
1
Vocal
1 ✱
OFF
CD
Chapter number
DVD-V
C
2
2
Time index
(hour:minute:second)
DVD-A DVD-V
You can start play from the desired
point by specifying the elapsed time.
Eg) If you start play from 1:46:50
(1 hr 46 min 50 sec), press in the
following order.
[1]^[4]^[6]^[5]^[0]^[ENTER]
1 : 46 : 50
ON
1 ENG
2 1
Angle number
DVD-A DVD-V
When selecting an angle number, the
scene encoded with that angle is
played.
1
Playback control
Indicates whether playback control is
on or off.
VCD
Playback control cannot be adjusted.
PBC
ON
Changing the time display
DVD-A VCD CD
Track elapsed time
Track remaining time
Page number
DVD-A
When you select a page number, the
picture on that page is played.
Page
1
Disc remaining time
Audio mode
VCD
When you select a channel, sound is
output from the channel you have
selected.
LR
L
R
L R
Digital
1 ENG 3/2.1 ch
12
3
DVD-A DVD-V
1 Audio track number
2 Audio track Language:
See Å for language abbreviations.
3 Audio signal type: See ı for
details.
Notes
• Display may differ in accordance with the disc’s specification.
• Time remaining on the disc does not appears during program or
random-sequence play.
• When playing a video-CD disc using playback control, no track
number or time is displayed.
DVD-A DVD-V
1 Subtitle on/off
2 Subtitle language
PLAYING A DISC
Group number
DVD-A
G
Karaoke vocal on/off
DVD-A DVD-V
(Karaoke DVD only)
This works only when DISC DIRECT
is functioning.
Solo: OFF or ON
Duet: OFF, V1+V2, V1 or V2
Å Language
ENG:
FRA:
DEU:
ITA:
ESP:
NLD:
English
French
German
Italian
Spanish
Dutch
SVE: Swedish
NOR: Norwegian
DAN: Danish
POR: Portuguese
RUS: Russian
JPN: Japanese
CHI: Chinese
KOR: Korean
MAL: Malay
VIE: Vietnamese
THA: Thai
*:
Others
ı Signal type/data
LPCM/PPCM/qDolbyDigital/DTS/MPEG: Signal type
k (kHz): Sampling frequency
b (bit): Number of bits
ch (channel): Number of channels
Example:
3/2 .1ch
1: Subwoofer
(not displayed if there is no subwoofer signal)
0: Rear channel not available on the disc
1: Rear channel (monaural)
2: Rear channels (left/right)
English
1: Front channel (monaural)
2: Front channels (left/right)
3: Front channels (left/right) + Center
35
ON-SCREEN MENU
Icons for player menu
■ Play mode menu
■ Display menu
eg) DVD-Video
eg) DVD-Video
AB
AB
OFF
–––
1 2 3 ✱✱
OFF
–––
IPB
1 2 3 ✱✱
A-B repeat (^ P.46)
DVD-A DVD-V VCD CD
[ENTER] (start point)^[ENTER] (finish
point)
To cancel
[ENTER]
Repeat play (^ P.45)
DVD-V
C: Chapter, T: Title, OFF: Normal play
DVD-A VCD CD
T: Track, A: All, G: Group, OFF: Normal play
OFF
IPB display
DVD-V
Displays the picture type (I/P/B)* of a still
picture (when paused).
ON
OFF
*I/P/B (P.73)
IPB
OFF
Display dimmer
Changes the brightness of the front panel
display.
BRIGHT
BRIGHT
Play mode display
DVD-A VCD CD
The play modes cannot be adjusted.
RND: Random play, PGM: Programmed play,
– – –: Normal play,
ALL: All groups DVD-A
Bookmarks (^ P.44)
DVD-A DVD-V VCD CD
You can mark at the points where you want to
play again.
(up to 5 points)
To mark a point
[j, i]^[ENTER] (at the desired point)
To recall a bookmark
[j, i]^[ENTER]
To erase a bookmark
[j, i]^[CANCEL]
BRIGHT
36
AUTO*
When you select AUTO, the front panel
display gets darker when the disc on which
video images are recorded is being played. But
when you pause etc, it gets brighter temporarily.
■ Audio menu
eg) DVD-Video
SP OFF
OFF
This cannot be adjusted.
SP OFF
OFF
Cinema dialog
DVD-V
(Dolby Digital/DTS 3ch or more channel
discs)
This works only when DISC DIRECT is
functioning. When selecting ON, the volume
level of the dialog part output from the center
channel increases.
36
106_S100_29-37_EN
DIM
02.5.13, 1:30 PM
ON-SCREEN MENU
■ Video menu
When PROGRESSIVE is on (U.S.A. and Canada models)
N
N
U
0
N
Auto
Digital picture mode
DVD-A DVD-V VCD
N: Normal
C: Cinema image (suited for movie viewing)
Transfer MODE
Selects the method of conversion for
progressive output to suit the type of material
being played.
Auto (normal): for viewing film material
Video: for video material
Contrast (–7 to +7)
Adjusts the contrast between light and
dark part of the picture.
Brightness (0 to +15)
Adjusts the brightness of the picture.
0
PLAYING A DISC
Digital picture mode
DVD-A DVD-V VCD
N: Normal
C: Cinema image (suited for movie viewing)
U: User mode
To change the user mode
1 Select User mode.
2 Press (j, i) to select the item you wish to
change.
3 Press (u, d) to change the setting.
The following items are displayed when
you select “U”.
N
Auto
Sharpness (–6 to +6) (U.K., Europe,
Australia and General models)
Adjusts the horizontal resolution of the
picture.
0
Color (–7 to +7)
Adjusts the shade of the picture’s color.
0
■ Shuttle screen
Slow-motion play
: Backward
DVD-A
DVD-V
Pause
DVD-A
VCD
DVD-V
CD
Slow-motion play
: Forward
DVD-A
DVD-V
VCD
+100
–100
Search
: Backward
DVD-A
DVD-V
VCD
CD
Play
DVD-A
VCD
DVD-V
CD
Search
: Forward
DVD-A
VCD
DVD-V
CD
Note
• Slow-motion only works on the video parts of DVD-Audio.
English
37
USING MULTIPLE FUNCTIONS
■ Video CD’s playback control
Using a disc’s menu
Discs may contain multiple audio tracks, subtitles, index
and bonus materials such as movie trailers and cast
information, etc. And many of them have menu screens
that enable you to control these features. This section
gives you general instruction about how to operate these
screens. However, the operation methods may differ
depending on the disc.
POWER
TV
POWER
AV
SLEEP
TV MODE
INPUT
CH
TUNER
VOL
MUTE
AUDIO
SUBTITLE
VCR
REC
t
a
VIDEO 2
CODE SET
CD
SHIFT
DVD
AMP
ROCK
ENTERTAINMENT
JAZZ
1
2
3
4
SPORTS
SETUP
MONO MOVIE
ANGLE
MOVIE 1
MARKER
MOVIE 2
5
/DTS
6
7
8
PLAY MODE
SELECT
REPEAT
MATRIX 6.1
A–B
STEREO
0
>
–10
CANCEL
9
GROUP
u, d, j, i
/ ENTER
w
y
VIDEO 1
HALL
TOP MENU
MD
CD–R
TOP MENU
LEVEL
MENU
SET MENU
PRESET
CH
PAGE
MUTE
MENU
ABCDE
ENTER
CH
RETURN
PRESET
TEST
ON SCREEN
Numeric buttons
B. BOOST
RETURN
VOL
(U.S.A. model)
DVD-A
1
DVD-V
Press TOP MENU or MENU during playback
to show menu screen.
With some discs, menu screen appears automatically
when you start playback.
VCD
If a Video CD has “playback control” written on it or its
jacket, it means that particular scenes or information can
be selected for viewing interactively with the television
using the menu screen. This unit can play Video CDs with
playback control.
Using menus to control play of a Video CD is called
“menu play” in these operating instructions.
Numeric buttons: Press to select the desired item.
RETURN: Press to go back to the previous screen.
w (PLAY): Press to play the selected item.
y: Press to show the next screen.
t: Press to show the previous screen.
a (STOP): Press while a menu screen appears on the
video monitor to cancel the playback control.
Note
• Playback control is automatically canceled during program
play or random-sequence play.
Enhancing video quality [U.S.A.
and Canada models only]
This unit’s component video outputs are capable of output
progressive signals. You can enjoy even higher quality
picture if you have connected this unit to a monitor that
can receive progressive signals.
PROGRESSIVE
A/B/C/D/E
PRESET/BAND
PRESET/TUNING
PROGRESSIVE
DISC DIRECT
MEMORY
AUTO/MAN’L
PROGRESSIVE
2
Press the cursor buttons (u, d, j, i) to
select the desired item and then press
ENTER.
DISC DIRECT
SILENT
PROGRESSIVE indicator
(U.S.A. model)
Press PROGRESSIVE on the front panel.
The PROGRESSIVE indicator lights up.
To cancel this feature, press PROGRESSIVE again.
38
USING MULTIPLE FUNCTIONS
Notes
• If the screen shifts off center when using progressive output,
see “Adjusting the screen position” described below.
• When playing 4:3 aspect software with a 16:9 aspect widescreen monitor using progressive output, the picture may
appear horizontally stretched to fill the screen. In that case,
change the aspect to the correct one at your monitor. If the
monitor cannot change the aspect, it is recommended to turn
the progressive feature off. (The progressive output is switched
to the interlace output.)
• When the PROGRESSIVE function is working, video signals
are output only from the component video jacks.
(U.S.A. and Canada models)
With some video monitors, the screen may shift off center
with progressive signals output from this unit. To adjust
the position, follow the method described below using the
remote control.
1
2
This unit is compatible with YAMAHA digital cinema
projector DPX-1.
DVD-Audio features
Press d to pause play.
VIDEO 1
SHIFT
Follow the step 1 on “Operating menu bar”
on page 34 to show the video menu.
CODE SET
CD
SHIFT
DVD
AMP
ENTERTAINMENT
HALL
JAZZ
ROCK
1
2
3
4
SPORTS
SETUP
MONO MOVIE
ANGLE
MOVIE 1
MARKER
MOVIE 2
5
3
4
DVD-A
Press i to select the rightmost icon ( ).
/DTS
6
7
8
PLAY MODE
SELECT
REPEAT
MATRIX 6.1
A–B
STEREO
0
>–10
CANCEL
9
TOP MENU
LEVEL
Adjust the position.
To move to the left, press the numeric button 1.
To move to the right, press the numeric button 3.
GROUP
MENU
SET MENU
PRESET
u, d, j, i
/ ENTER
CH
PAGE
MUTE
PLAYING A DISC
■ Adjusting the screen position
(when using progressive output)
CONSUMERS SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETS ARE
FULLY COMPATIBLE WITH THIS PRODUCT
AND MAY CAUSE ARTIFACTS TO BE
DISPLAYED IN THE PICTURE. IN CASE OF 525
PROGRESSIVE SCAN PICTURE PROBLEMS, IT
IS RECOMMENDED THAT THE USER SWITCH
THE CONNECTION TO THE “STANDARD
DEFINITION” OUTPUT. IF THERE ARE
QUESTIONS REGARDING OUR VIDEO
MONITOR COMPATIBILITY WITH THIS MODEL
525P DVD PLAYER, PLEASE CONTACT OUR
CUSTOMER SERVICE CENTER.
PAGE
GROUP
ABCDE
ENTER
CH
PRESET
TEST
ON SCREEN
B. BOOST
RETURN
VOL
Example:
(U.S.A. model)
Press 3 to move to the right.
• Pressing the numeric button 2 after pressing 1 or 3
sets the screen back to the original position.
• You can check whether the picture is in the center
or not by switching to normal output (press
PROGRESSIVE so the indicator turns off).
5
Save the adjusted position.
First press a and then press SETUP to show setup
menu. Then press SETUP once again (or RETURN)
and now the position is saved.
■ To play a track on a specific
group
1
Press GROUP while pressing SHIFT.
The group and track icons appear on the video
monitor.
2
Press the cursor buttons (u, d) to select a
group number and press ENTER.
3
Press the cursor buttons (u, d) to select a
track number and press ENTER.
The selected track starts to play.
y
• You can also use the numeric buttons to select a group and a
track.
English
39
107_S100_38-53_EN
39
02.5.13, 1:31 PM
USING MULTIPLE FUNCTIONS
■ To play a bonus group
Some discs contain bonus groups. If it requires 4 digit
password, consult the disc jacket, etc.
1
2
Press a to stop play.
3
Press the cursor buttons (u, d) to select a
bonus group and then press ENTER or the
cursor button (i).
4
5
Press GROUP while pressing SHIFT.
The group and track icons appear on the video
monitor.
Enhancing audio quality (DISC
DIRECT) DVD-A DVD-V VCD CD
If you operate the DISC DIRECT function, a DVD-Audio
disc is played with the multi-channels, and the DVDAudio disc recorded with the 192kHz sampling frequency
is played, keeping the original sound quality. This
function also has an effect on improving the sound quality
of a disc recorded with lower sampling frequency.
DISC DIRECT
Enter a 4 digit password using the numeric
buttons and then press ENTER.
DISC DIRECT
A/B/C/D/E
Press the cursor buttons (u, d) to select a
track and then press ENTER.
PRESET/BAND
PRESET/TUNING
MEMORY
AUTO/MAN’L
DISC DIRECT
SILENT
■ To change pages
DISC DIRECT indicator
DVD-Audio may contain some information screens called
“pages” that show photo galleries, artist biographies and
lyrics, etc.
When it appears, you can move to another page by
pressing PAGE while SHIFT is pressed. (Page number
appears on the display when you change pages.).
Press DISC DIRECT.
Each time DISC DIRECT is pressed, the display
changes as follows: AUTO^ON^OFF^AUTO -...
• AUTO: Some discs switch this function on or off.
(In the case of DVD-Audio discs, AUTO is
automatically switched to ON.)
• ON: DISC DIRECT is turned on.
• OFF (initial setting): DISC DIRECT is turned off.
y
• When DISC DIRECT is functioning, the DISC DIRECT
indicator on the front panel lights up.
• To adjust the output level of speakers while DISC DIRECT is
functioning, see “Speaker settings” on the SETUP MENU on
page 52.
Notes
• DISC DIRECT does not function while a SETUP MENU
screen is displayed.
• When DISC DIRECT is functioning, note the following:
– Sound effect is not added to reproduced sound. (Turn DISC
DIRECT off to add sound effect.)
– Only 1E, 5, 9 settings of the SET MENU items function. (See
page 59.)
– The output level of effect speakers cannot be adjusted during
playback. (See page 64.)
– Adjusting the output level of speakers using test tone in the
AMP mode cannot be made. (See page 20.)
– The displays of decoders, PCM, input signal channels etc do
not light up on the front panel display.
– The speaker settings are switched to the settings for DVD
use. (See page 52.)
– When using headphones, set the “Speaker settings” on the
SETUP MENU to “2-channel”. (See page 52.)
– With some discs, sound may not be output from the
subwoofer.
40
USING MULTIPLE FUNCTIONS
Switching audio tracks, subtitles
and angles DVD-A DVD-V VCD
■ Subtitles
Press SUBTITLE during play.
ON
1 ENG
Some discs are encoded with several audio tracks,
multilingual subtitles or multiple camera angles. Refer to
disc jacket etc. to see which feature is supported.
POWER
TV
• Pressing the button repeatedly toggles through all
subtitles recorded on the disc. You can also use the
cursor buttons (u, d) or the numeric buttons to
change subtitles.
POWER
AV
This icon appears on the
video monitor.
SLEEP
TV MODE
INPUT
CH
TUNER
VOL
CD–R
AUDIO
SUBTITLE
SUBTITLE
Notes
MD
MUTE
VCR
REC
AUDIO
VIDEO 1
SHIFT
Numeric buttons
CODE SET
CD
SHIFT
DVD
AMP
ENTERTAINMENT
HALL
JAZZ
ROCK
1
2
3
4
SPORTS
SETUP
MONO MOVIE
ANGLE
MOVIE 1
MARKER
MOVIE 2
5
/DTS
6
7
8
PLAY MODE
SELECT
REPEAT
MATRIX 6.1
A–B
STEREO
0
>
–10
9
CANCEL
GROUP
TOP MENU
LEVEL
MENU
SET MENU
PRESET
CH
u, d, j, i
Press SUBTITLE.
3
Press the cursor buttons (u, d) to select ON
and OFF.
PAGE
CH
B. BOOST
RETURN
VOL
RETURN
(U.S.A. model)
■ Audio tracks
Different audio track languages and/or formats can be
selected if available on the disc.
Press AUDIO during play.
LPCM
96k24b
1
2
MUTE
PRESET
1
To turn on/off the subtitles:
Press the cursor button (i).
( DVD-A , DVD-V ONLY)
ABCDE
ENTER
TEST
ON SCREEN
ANGLE
■ Angles
Some DVDs have scenes encoded with multiple camera
angles so that different viewpoint can be selected during
playback. ANGLE lights up on the front panel display
while a scene encoded with multiple angles is being
played.
Press ANGLE while pressing SHIFT.
This icon appears on the
video monitor.
• Pressing the button repeatedly toggles through all
audio tracks recorded on the disc. You can also use
the cursor buttons (u, d) or the numeric buttons
to change tracks.
Notes
• Play restarts from the beginning of the current track if you
change audio track while playing DVD-Audio, other than video
section.
• With DVD-Audio, track number 2 may appear even if the disc
does not support multiple audio tracks.
• You can also use the button to turn the vocals on and off on
karaoke discs. See the instruction of each disc.
PLAYING A DISC
VIDEO 2
• “- -” appears if the disc does not have a subtitle.
• Subtitles may not change immediately after you press the
button.
1
This icon appears on the video
monitor.
• Pressing ANGLE repeatedly while pressing SHIFT
toggles through all angles recorded on the disc.
You can also use the cursor buttons (u, d) or the
numeric buttons to change angles.
■ To turn the icon off
Press RETURN.
Notes
• With some discs, you cannot change audio tracks, subtitles or
angles in the way described above. In that case, go to the disc
menu and change them.
• With some discs, you cannot change angles.
English
41
USING MULTIPLE FUNCTIONS
All group play
1
2
2
DVD-A
Press a to stop play.
Press PLAY MODE while pressing SHIFT.
The “All group play” screen appears.
3
Press PLAY MODE repeatedly while pressing
SHIFT to select the program screen.
Each time you press PLAY MODE while pressing
SHIFT, the screen changes as follows:
Indication on the video monitor (example)
Program screen ( Programmed play mode)
Playing in your desired order
Press w.
PLAY MODE
Choose a track, then press ENTER.
No
1
Track
Time
Play
Programmed play
DVD-A
VCD
Clear
Clear all
CD
SELECT
You can enjoy listening to your favorite tracks selected
from a disc in any desired order by programming tracks.
POWER
TV
Total time
ENTER
0:00
Press PLAY to start
Random screen (Random play mode)
Playing in random sequence
POWER
AV
RETURN
SLEEP
TV MODE
INPUT
TUNER
CH
VOL
MUTE
AUDIO
SUBTITLE
VCR
REC
y
w
a
SHIFT
VIDEO 2
CD
SHIFT
DVD
AMP
ROCK
ENTERTAINMENT
JAZZ
1
2
3
4
SPORTS
SETUP
MONO MOVIE
ANGLE
MOVIE 1
MARKER
MOVIE 2
5
/DTS
6
7
8
PLAY MODE
SELECT
REPEAT
MATRIX 6.1
A–B
STEREO
9
>
–10
0
GROUP
TOP MENU
LEVEL
MENU
SET MENU
PRESET
u, d, j, i
/ ENTER
CH
CANCEL
PAGE
MUTE
ENTER
TEST
ON SCREEN
B. BOOST
RETURN
VOL
(U.S.A. model)
42
Numeric buttons
CANCEL
3
4
Press numeric buttons to select the track.
Press w to start play.
y
• You can also use the numeric buttons to select a track.
ABCDE
CH
PRESET
1
• The “PGM” indicator lights up on the front panel display.
VIDEO 1
CODE SET
HALL
PLAY MODE
Returning to normal play
MD
CD–R
Press a to stop play.
(In the case of DVD-Audio)
• The “All group play” screen is added to step 2.
• In step 4, press the cursor buttons (u, d) to select a
group and then press ENTER. Then, press the cursor
buttons (u, d) again to select a track and then press
ENTER.
• You can also use the numeric buttons to select a group
and a track.
USING MULTIPLE FUNCTIONS
■ To change or add to the program
during programmed play
1
Press a repeatedly to stop programmed
play.
2
Press the cursor buttons (u, d) to select the
order of the tracks you want to play.
3
Random play
When you select this mode, this unit plays all tracks on a
disc in random sequence.
POWER
TV
POWER
AV
SLEEP
TV MODE
Press the numeric buttons to enter a track
number.
INPUT
VOL
MUTE
■ To cancel the programmed tracks
AUDIO
VCR
REC
w
VIDEO 2
a
Press a repeatedly to stop programmed
play.
VIDEO 1
CD
CODE SET
SHIFT
Press the cursor buttons (u, d) to select the
track you want to cancel.
PLAY MODE
SHIFT
DVD
AMP
HALL
JAZZ
ROCK
ENTERTAINMENT
1
2
3
4
SPORTS
SETUP
MONO MOVIE
ANGLE
MOVIE 1
MARKER
MOVIE 2
5
/DTS
6
7
8
PLAY MODE
SELECT
REPEAT
MATRIX 6.1
A–B
STEREO
0
>–10
CANCEL
9
GROUP
3
MD
CD–R
TOP MENU
LEVEL
Press CANCEL.
ENTER
CH
Note
MENU
SET MENU
PRESET
PAGE
PLAYING A DISC
2
TUNER
CH
SUBTITLE
1
CD
VCD
DVD-A
CANCEL
MUTE
ABCDE
ENTER
CH
j, i
PRESET
• When you program a track of a Video CD (ver.2.0),
playback control is canceled during programmed play.
■ To move up and down the pages
on the program screen
Press e to move up the page, or press r to move
down the page.
TEST
ON SCREEN
Press a repeatedly to stop programmed
play.
2
Press PLAY MODE twice while pressing
SHIFT.
• When turning the power off, opening the disc tray,
or switching the input source, all the programs are
canceled.
VOL
(U.S.A. model)
1
2
Press a to stop play.
3
Press w to start random play.
■ To exit programming mode
1
B. BOOST
RETURN
Press PLAY MODE repeatedly while pressing
SHIFT.
The “RND” indicator lights up on the front panel
display.
English
43
USING MULTIPLE FUNCTIONS
■ To cancel random mode
1
2
Press a repeatedly to stop playback during
random play.
Press PLAY MODE while pressing SHIFT.
The “RND” indicator goes off.
• Opening the disc tray also cancels this mode.
Bookmarks
DVD-A
DVD-V
VCD
CD
This feature allows you to mark up to 5 points so that you
can quickly return to those points later.
VIDEO 1
SHIFT
CODE SET
CD
SHIFT
DVD
AMP
ROCK
ENTERTAINMENT
HALL
Note
JAZZ
1
2
3
4
SPORTS
SETUP
MONO MOVIE
ANGLE
MOVIE 1
MARKER
MOVIE 2
5
6
7
8
PLAY MODE
SELECT
REPEAT
MATRIX 6.1
A–B
STEREO
0
>–10
/DTS
9
• When this unit is in random mode while a Video CD
(ver.2.0) is loaded, playback control is canceled during
random play.
TOP MENU
LEVEL
GROUP
MENU
SET MENU
PRESET
j, i
/ ENTER
■ Random play (DVD-Audio)
CH
CANCEL
PAGE
MARKER
CANCEL
MUTE
ABCDE
ENTER
CH
PRESET
TEST
ON SCREEN
B. BOOST
RETURN
VOL
In the step 2 of “Random play”, press the cursor buttons
(j, i) to select a group and then press ENTER.
Eg) DVD-Audio (The disc that has 2 groups.)
(U.S.A. model)
Random Playback
1
Choose a group or groups.
All
1
Press MARKER while pressing SHIFT.
2
This icon appears on the video
monitor.
SELECT
ENTER
Highlighted
RETURN
Press PLAY to start
2
Press the cursor buttons (j, i) to select one
of five asterisks.
The selected asterisk is highlighted.
3
Press ENTER.
The selected asterisk turns to be the bookmark
number.
y
• You can select more than one group.
• You can use the numeric buttons to select a group.
If you want to cancel the group(s) you have selected
while selecting them, press the cursor buttons (j, i) to
select the group you want to cancel, and then press
CANCEL or ENTER.
This icon appears on the video
monitor.
Bookmark number
y
• You can also cancel a group by entering the number you want
to cancel using numeric buttons.
■ To play from the marked point
Press the cursor buttons (j, i) to select a bookmark
number and press ENTER.
■ To clear a bookmark
Press the cursor buttons (j, i) to select a bookmark
number and press CANCEL.
Note
• When you open the disc tray, turn this unit off or switch the
input source, all bookmarks are cleared.
44
USING MULTIPLE FUNCTIONS
Repeat play
DVD-A
DVD-V
VCD
CD
This function allows you to play your desired chapter,
track or disc repeatedly.
VIDEO 1
SHIFT
CD
CODE SET
SHIFT
DVD
AMP
HALL
JAZZ
ROCK
ENTERTAINMENT
1
2
3
4
SPORTS
SETUP
MONO MOVIE
ANGLE
MOVIE 1
MARKER
MOVIE 2
5
/DTS
6
7
8
PLAY MODE
SELECT
REPEAT
MATRIX 6.1
A–B
STEREO
0
>–10
CANCEL
9
TOP MENU
LEVEL
GROUP
MENU
SET MENU
PRESET
CH
REPEAT
DVD-A
VCD
CD
Press REPEAT while pressing SHIFT during
programmed play. (p.42)
Each time you press REPEAT while pressing SHIFT,
the repeat mode changes as follows:
Eg) CD
PAGE
MUTE
A
PGM
ABCDE
ENTER
CH
PRESET
B. BOOST
RETURN
VOL
(U.S.A. model)
Press REPEAT while pressing SHIFT during
playback to select repeat mode.
Each time this button is pressed, repeat mode
changes as follows. The name of the selected repeat
mode scrolls once on the multi-information display
and the corresponding indicators light up.
Eg) DVD-Video
DVD-Audio/Video-CD/CD
T: TRACK: The current track is played repeatedly.
A: ALL: The current programmed track is played
repeatedly.
OFF: NORMAL PLAY: Repeat mode is canceled.
(returning to normal program play)
■ Random-sequence repeat
DVD-A
VCD
CD
PLAYING A DISC
TEST
ON SCREEN
■ Program repeat
Press REPEAT while pressing SHIFT during
random play. (p.43)
Each time you press REPEAT while pressing SHIFT,
the repeat mode changes as follows:
Eg) CD
C
A
DVD-Video
C: CHAPTER: The current chapter is played
repeatedly.
T: TITLE: The current title is played repeatedly.
OFF: NORMAL PLAY: Repeat mode is canceled.
DVD-Audio/Video-CD/CD
T: TRACK: The current track is played repeatedly.
A: ALL (Video CD, CD): The current disc is played
repeatedly.
or
G: GROUP (DVD Audio): The current group is
played repeatedly.
OFF: NORMAL PLAY: Repeat mode is canceled.
RND
DVD-Audio/Video-CD/CD
T: TRACK: The current track is played repeatedly.
A: ALL: The current disc is played repeatedly.
OFF: NORMAL PLAY: Repeat mode is canceled.
(returning to normal random play)
y
• When the repeat mode is OFF, “
” indicator goes off.
Notes
• Repeat play may not work properly with some DVD-Video.
• Repeat play does not work with an interactive DVD-Video or
during menu play of a VCD with playback control.
English
45
USING MULTIPLE FUNCTIONS
Repeat A-B
DVD-A
DVD-V
VCD
CD
■ To cancel A-B repeat
Press A-B while pressing SHIFT.
This function allows you to specify two points and play
between them repeatedly.
This icon appears on the video
monitor.
VIDEO 1
CODE SET
SHIFT
CD
SHIFT
DVD
AMP
HALL
JAZZ
ROCK
ENTERTAINMENT
1
2
3
4
SPORTS
SETUP
MONO MOVIE
ANGLE
MOVIE 1
MARKER
MOVIE 2
5
/DTS
6
7
8
PLAY MODE
SELECT
REPEAT
MATRIX 6.1
A–B
STEREO
0
>–10
CANCEL
9
TOP MENU
LEVEL
GROUP
MENU
SET MENU
PRESET
CH
Notes
A-B
PAGE
MUTE
ABCDE
ENTER
CH
PRESET
TEST
ON SCREEN
B. BOOST
RETURN
VOL
(U.S.A. model)
1
Press A-B while pressing SHIFT during play
at the point where you want to start A-B
repeat.
A
This icon appears on the video
monitor.
y
•“
2
” and “A-” light up on the front panel display.
Press A-B while pressing SHIFT at the point
where you want to end A-B repeat.
AB
This icon appears on the video
monitor.
y
• “B” is added on the front panel display. The section
between the point A and B starts playing repeatedly.
46
• This function may not available with some DVD-Video.
• This function works only within a title (DVD-Video) or a track
(DVD-Audio, VCD, CD).
SETUP MENU
With the setup menu, you can change this unit’s system
defaults to suit your preference and this system.
Operating the setup menu
VIDEO 1
SHIFT
SETUP
CODE SET
CD
SHIFT
DVD
AMP
ENTERTAINMENT
HALL
JAZZ
ROCK
1
2
3
4
SPORTS
SETUP
MONO MOVIE
ANGLE
MOVIE 1
MARKER
MOVIE 2
5
/DTS
6
7
8
PLAY MODE
SELECT
REPEAT
MATRIX 6.1
A–B
STEREO
0
>–10
9
GROUP
MENU
SET MENU
PRESET
u, d, j, i
/ ENTER
CH
PAGE
Press RETURN.
CH
B. BOOST
RETURN
Press the cursor buttons (u, d) to change
the setting and press ENTER.
When pressing ENTER, you can go back to the
screen in step 2.
CANCEL
MUTE
PRESET
TEST
ON SCREEN
4
■ To go back to the previous
screen
ABCDE
ENTER
Press the cursor buttons (u, d) to select the
desired item and press ENTER.
VOL
PLAYING A DISC
TOP MENU
LEVEL
3
RETURN
■ To get out from the setup menu
mode
Press SETUP while pressing SHIFT.
Note
(U.S.A. model)
1
Press SETUP while pressing SHIFT.
The menu screen appears on the video monitor.
2
Press the cursor buttons (j, i) to select a
menu group.
There are five menu groups. The screen shows the
items that belong to the menu group of the selected
tab.
Disc
Audio
Video menu
■ To return all the settings on the
setup menu to the factory
settings
(While playback is stopped)
Keep pressing d and a on the front panel
together until “Initialized” appears on the
video monitor.
Disc menu
1
SETUP
• When you display the setup menu screen, the DISC DIRECT
function is automatically turned on. When finishing the setup
menu, the setting of the function is automatically returned to
the previous setting.
English
M
2
SETUP
Video
TV Aspect
4:3 Pan&Scan
TV Type
Audio menu
A t
ti
3
SETUP
Audio
Speaker Setting
Multi-channel
Display menu
4
SETUP
Others menu
Display
M
L
E
li h
5
SETUP
Others
English
47
SETUP MENU
Summary of settings
The following chart shows the menu groups and each items. In the “Options” column, the factory settings are
underlined.
Menu groups
Disc
Items
Audio DVD-A DVD-V
Select the preferred audio track language.
Subtitle DVD-A DVD-V
Select the preferred subtitle language.
Menus DVD-A DVD-V
Select the preferred disc menu language.
Ratings DVD-V
Set a ratings level to limit DVD-Video play. See p.51 for details.
Options
(U.S.A. and Canada models)
English French
Spanish
Other**
(Australia model)
English French
German
Spanish Original* Other**
(U.K. and Europe models)
English French
German
Spanish Original* Other**
(General model)
English Chinese Original*
(U.S.A. and Canada models)
Automatic
English
Spanish
Other**
(Australia model)
Automatic
English
German
Italian
Other**
(U.K. and Europe models)
Automatic
English
German
Italian
Other**
(General model)
Automatic
English
Other**
Original*
Italian
Italian
Other**
French
French
Spanish
French
Spanish
Chinese
(U.S.A. and Canada models)
English French
Spanish
(Australia model)
English French
German
Spanish Other**
(U.K. and Europe models)
English French
German
Spanish Other**
(General model)
English Chinese Other**
Other**
Italian
Italian
Setting ratings (When level 8 is selected)
8 No Limit
1 to 7
0 Lock All
Changing ratings (When level 0 – 7 is
selected)
Unlock Player
Change Level
Change Password
Temporary Unlock
Video
48
TV Aspect
If you connect to a 4:3 conventional-type monitor, select “4:3
Pan&Scan” (left and right sides trimmed when playing 16:9
software) or “4:3 Letterbox” (black areas appear at the top and
bottom when playing 16:9 software). Select “16:9” if you connect
to a widescreen monitor.
4:3 Pan&Scan
16:9
Still Mode
Specify the type of picture shown when paused. First select
“Automatic”. If a still picture jitters, select “Field”. If details don’t
appear clearly enough, select “Frame”.
Automatic
4:3 Letterbox
Field
Frame
SETUP MENU
Menu groups
Video
Audio
Items
Options
Black Level Control
(U.S.A. and Canada models)
Change the black level of the picture. Select “Lighter” when you
connect to the monitor using VIDEO or S VIDEO terminal. Select
“Darker” when using COMPONENT terminals.
Lighter
NTSC Disc Output
(U.K., Europe, Australia and General models)
Select video signal format (PAL 60 or NTSC) to be output when
playing NTSC disc.
(U.K., Europe and Australia models)
PAL 60
NTSC
(General model)
PAL 60
NTSC
Speaker Setting DVD-A DVD-V
Adjust the settings to suit your audio system and your listening
environment when DISC DIRECT is functioning. See p.52 for
details.
Multi-channel:
Select this when connected to multi-channel
system. There are three sub-items as below.
• Speaker presence and size
• Delay time
• Channel balance
Darker
Display
PCM Down Conversion DVD-A DVD-V
Select how to output the high sampling-frequency audio signals on
a disc that is not copyright-protected. See p.51 for details.
No
Yes
Dolby Digital DVD-A DVD-V
Decide the signal type that output from this unit’s digital outputs.
Select “Bitstream” when connected device has Dolby Digital
decoder. Select “PCM” when not.
Bitstream
PCM
DTS Digital Surround DVD-A DVD-V
Decide the signal type that output from this unit’s digital outputs.
Select “Bitstream” when connected device has DTS decoder. Select
“PCM” when not.
Bitstream
PCM
MPEG DVD-A DVD-V
(U.K., Europe and Australia models)
Decide the signal type that output from this unit’s digital outputs.
Select “Bitstream” when connected device has MPEG decoder.
Select “PCM” when not.
Bitstream
PCM
D. Range Compression DVD-A DVD-V
(Dolby Digital only)
Change the dynamic range for late night viewing. Select “On” to
make it easier to hear dialog etc. even at low volume level.
Off
On
Audio during Search DVD-A DVD-V VCD
Select whether to have sound during search. Select “Off” if sound
distorted when searching with Dolby Digital or DTS material. With
DVD-Audio, the sound may be heard even if you select “Off”.
On
Off
Menu Language
Select the preferred language for on-screen messages and setup
menu.
(U.S.A. and Canada models)
English Français Español
(Australia model)
English Français Deutsch
Español
(U.K. and Europe models)
English Français Deutsch
Español
(General model)
English
On-Screen Messages
Select whether to show on-screen messages or not.
On
PLAYING A DISC
2-channel:
Select this when connected to 2-channel
system.
Italiano
Italiano
Off
English
49
107_S100_38-53_EN
49
02.5.13, 1:32 PM
SETUP MENU
Menu groups
Others
Items
Options
DVD-Video Mode
Some DVD-Audio discs contain the DVD-Video contents that can
be played only by a DVD-Video player. If you want to play the
contents, select “On”. If not, select “Off”.
Off
On
Demo
A demonstration of the unit’s on-screen displays starts when you
select “On”. The demonstration stops when you press button a etc.
and the setting reverts to “Off”.
Off
On
Notes
• * If you set to “Original” at Audio, the original language of each disc is selected.
**If you set to “Other” at Audio, Subtitle or Menus, you need to select a four-digit number of the desired language from the language
code list and enter with numeric buttons.
• When the audio you have selected from “Audio” is not recorded on the disc but instead the subtitle of the same language is recorded
on it, the subtitle is displayed on the screen. However, if the audio is recorded on the disc, the subtitle is not displayed.
■ Language selection and language code list
Language code list
6565:
6566:
6570:
6577:
6582:
6583:
6588:
6590:
6665:
6669:
6671:
6672:
6678:
6679:
6682:
6765:
6779:
6783:
6789:
6865:
6869:
6890:
6976:
6978:
6979:
6983:
6984:
6985:
7065:
7073:
7074:
Afar
Abkhazian
Afrikaans
Ameharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Bengali; Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Danish
German
Bhutani
Greek
English
Esperanto
Spanish
Estonian
Basque
Persian
Finnish
Fiji
7079:
7082:
7089:
7165:
7168:
7176:
7178:
7185:
7265:
7273:
7282:
7285:
7289:
7365:
7378:
7383:
7384:
7387:
7465:
7473:
7487:
7565:
7575:
7576:
7577:
7578:
7579:
7583:
7585:
7589:
7665:
Faroese
French
Frisian
Irish
Scots Gaelic
Galician
Guarani
Gujarati
Hausa
Hindi
Croatian
Hungarian
Armenian
Interlingua
Indonesian
Icelandic
Italian
Hebrew
Japanese
Yiddish
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Korean
Kashmiri
Kurdish
Kirghiz
Latin
7678:
7679:
7684:
7686:
7771:
7773:
7775:
7776:
7778:
7779:
7782:
7783:
7784:
7789:
7865:
7869:
7876:
7879:
7982:
8065:
8076:
8083:
8084:
8185:
8277:
8279:
8285:
8365:
8368:
8372:
8373:
Lingala
Laotian
Lithuanian
Latvian, Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Malay
Maltese
Burmese
Nauru
Nepali
Dutch
Norwegian
Oriya
Punjabi
Polish
Pashto, Pushto
Portuguese
Quechua
Rhaeto-Romance
Romanian
Russian
Sanskrit
Sindhi
Serbo-Croatian
Singhalese
8375:
8376:
8377:
8378:
8379:
8381:
8382:
8385:
8386:
8387:
8465:
8469:
8471:
8472:
8473:
8475:
8476:
8479:
8482:
8484:
8487:
8575:
8582:
8590:
8673:
8679:
8779:
8872:
8979:
9072:
9085:
Slovak
Slovenian
Samoan
Shona
Somali
Albanian
Serbian
Sundanese
Swedish
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Tonga
Turkish
Tatar
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Wolof
Xhosa
Yoruba
Chinese
Zulu
Note
• Selecting audio, subtitle or disc menu language is a disc-dependent matter. The language selected at the setup menu is not effective if
a disc does not have it.
50
107_S100_38-53_EN
50
02.5.13, 1:33 PM
SETUP MENU
Ratings
■ To change settings (Level 7 to 0)
DVD-V
Depending on software capability, you can prevent discs
or scenes with objectionable material from being played
according to your desired rating. You can select the level
and lock it by designating a password.
Level 8
When you select “Ratings” in the setup menu, the screen
where you enter a password is displayed.
Enter 4-digit number with numeric buttons
and press ENTER.
Unlock Player: unlocks the rating and returns to level
8.
Change Password: changes the password.
Change Level: changes the level of the rating.
Temporary Unlock: temporarily unlocks the level of
the rating. It will be kept unlocked until you switch
the input source, turn the power off, or open the disc
tray.
2
Press the cursor buttons (u, d) to select the
desired item and press ENTER.
All DVDs can be played.
Level 7 to 1
Level 0
Level of restriction becomes severer as the
number gets smaller.
All DVDs cannot be played.
VIDEO 1
CODE SET
CD
SHIFT
DVD
AMP
ENTERTAINMENT
HALL
JAZZ
ROCK
1
2
3
4
SPORTS
SETUP
MONO MOVIE
ANGLE
MOVIE 1
MARKER
MOVIE 2
5
6
7
8
PLAY MODE
SELECT
REPEAT
MATRIX 6.1
A–B
STEREO
/DTS
9
>–10
0
GROUP
TOP MENU
LEVEL
MENU
SET MENU
PRESET
u, d, j, i
/ ENTER
CH
CANCEL
PAGE
Numeric buttons
CANCEL
MUTE
ABCDE
ENTER
CH
Return the setting to the factory setting. See page 47.
PRESET
TEST
ON SCREEN
■ If you have forgotten your
password
B. BOOST
RETURN
VOL
PLAYING A DISC
1
Note
• Not only the password setting but also all the other settings will
turn back to the factory settings.
(U.S.A. model)
■ Setting method (Level 8)
1
Press SETUP while pressing SHIFT.
The menu screen appears on the video monitor.
2
Press d to select “Ratings” and press
ENTER.
3
Enter 4-digit number with numeric buttons
and press ENTER.
Press CANCEL if you want to re-enter other number.
The screen that confirms your password appears. Do
not forget your password.
SETUP
SELECT
Ratings
Enter a 4-digit password,
then press ENTER.
Password
PCM down conversion
DVD-A
DVD-V
Decide whether to output high-quality digital signals
(sampling frequency of 88.2 kHz and 96 kHz) or not, in
accordance with the capability of the connected
component.
• If your A/V component is capable of handling high-rate
sampling frequency digital signals, select “No”.
• If not, select “Yes” so that digital output signals are
converted to 48 kHz or 44.1 kHz.
Note
• If a disc is copyright protected or has a sampling frequency of
176.4 kHz or more, signals are automatically converted to
either 48 kHz or 44.1 kHz.
✱✱✱✱
ENTER RETURN
4
Press ENTER.
When you select a disc that exceeds the rating you
have set, a message appears on the video monitor.
In that case, follow the procedure that appears on the
screen. You can go back to the previous screen by
pressing ENTER.
English
51
SETUP MENU
Speaker settings
DVD-A
DVD-V
When you adjust speakers while DISC DIRECT is
functioning, follow the procedures described below.
a Output mode
Change the settings of each speaker in accordance with
your speaker system.
1
Press the cursor buttons (u, d, j, i) to
select a speaker and press ENTER.
2
Press the cursor buttons (u, d) to select the
setting and press ENTER.
• Choices of the speaker size
L: Large, Small
R: Large, Small
C: Large, Small, None
SW: Used, Not used
LS: Large, Small, None
RS: Large, Small, None
The size of L is set to be the same as that of R.
Therefore, if you select Large for L, the size of R is
automatically set to Large. This also applies to the
sizes of LS and RS.
• Example: Rear left speaker
VIDEO 1
CODE SET
CD
SHIFT
HALL
JAZZ
DVD
AMP
ROCK
ENTERTAINMENT
1
2
3
4
SPORTS
SETUP
MONO MOVIE
ANGLE
MOVIE 1
MARKER
MOVIE 2
5
6
7
8
PLAY MODE
SELECT
REPEAT
MATRIX 6.1
A–B
STEREO
0
>–10
/DTS
9
PRESET
u, d, j, i
/ ENTER
CH
CANCEL
GROUP
MENU
SET MENU
TOP MENU
LEVEL
PAGE
MUTE
ABCDE
ENTER
CH
PRESET
TEST
ON SCREEN
B. BOOST
RETURN
VOL
(U.S.A. model)
If you wish to enjoy multi-channel sound reproduction,
you need to select “Multi-channel” on the setup menu and
make following adjustments.
When you select “2-channel”, that is, when connecting to
only 2 speakers or a Dolby Pro Logic decoder, the
following adjustments are not necessary.
Front (L)
a
Center
bac
Front (R)
a
Exit
SETUP
L
ms
0
C
Exit
Test
dB
0
R
dB
0
SW
dB
0
RS
SELECT
LS
ENTER
RETURN
dB
0
ms
0
Test signal
Rear Subwoofer
(L) a (L) c b (R) c (R) a
b a
52
1
2
3
LS
LS
1 when the speaker is not used.
2 when using a large speaker capable of lowfrequency (under 100 Hz) output.
3 when using a small speaker that is not capable of
low-frequency output. (the included speakers,
NX-S100S etc.)
• Factory settings of the speaker sizes
L/R: Large
C/LS/RS: Large
SW: Used
SETUP MENU
b Delay time
(Only center/rear channels of the
DVD-Video discs recorded in the
Dolby Digital format)
c Speaker balance
You can adjust the output level of each effect speakers
(center, rear L/R) using the test tone.
1
To obtain the maximum effect of Dolby Digital 5.1
channel source, all speakers should be located at the same
distance from the listening position. However, in many
cases the center speaker is placed in line with the front
speakers, etc. You can virtually increase the distance of
the center and rear speakers by adjusting the delay time.
L
2
R
C
C
R
RS
LS
Listening to the test tone, press the cursor
buttons (u, d) to adjust the volume of effect
speakers and press ENTER.
The value in the “dB” box changes.
Distance A
Distance C
Listening
position
LS
SW
Distance B
RS
Note
• The subwoofer cannot output the test tone. Play
something and return to this screen to adjust the output
level of the subwoofer.
■ To exit the speaker setting mode
PLAYING A DISC
L
Press the cursor buttons (u, d, j, i) to
select “Test” and press ENTER.
The test tone is one speaker at a time in below order,
starting with the left front speaker.
Press the cursor buttons (u, d, j, i) to select “EXIT”
and press ENTER.
1
2
Press the cursor buttons (u, d, j, i) to
select a “ms” box and press ENTER.
Press the cursor buttons (u, d) to adjust the
delay time and press ENTER.
• Settings
Distance A, Distance B >
= Distance C: 0 ms
Distance A, Distance B < Distance C:
The following adjustments should be made.
Notes
• When DISC DIRECT is functioning, adjust the settings of the
speakers on the SETUP MENU screen. However, when it is not
functioning, follow the procedure in “ADJUSTING SPEAKER
OUTPUT LEVELS” on page 20 to adjust the settings.
• These adjustments may not be effective when the disc’s
original sound design is protected. P.PCM indicator lights up or
D.MIX indicator turns off in that case.
Center speaker
Difference
Setting
Approx. 50 cm (1 1/2 feet)
1.3 ms
Approx. 100 cm (3 feet)
2.6 ms
Approx. 150 cm (5 feet)
3.9 ms
Approx. 200 cm (6 feet)
5.3 ms
Rear speakers
Difference
Setting
Approx. 200 cm (6 feet)
5.3 ms
Approx. 400 cm (12 feet)
10.6 ms
Approx. 600 cm (18 feet)
15.9 ms
English
53
TUNING
■ Manual tuning
Indication on the front panel (example)
Preset station
number
Reception band
If the signal from the station you want to select is weak,
you must tune in to it manually.
TUNER
SP
C1:AM
Preset station
group
1
Select TUNER and the reception band
following steps 1 and 2 described in
“Automatic tuning” at left.
2
Press AUTO/MAN’L so that the “AUTO”
indicator goes off from the front panel
display.
3
Press PRESET/TUNING u / d to tune in to
the desired station manually.
Hold down the button to continue the tuning search.
630 kHz
Colon*1
Station frequency
*1
The colon (:) lights up in the preset mode and goes off in the tuning
mode.
Automatic and manual tuning
There are 2 ways to tune; automatic and manual.
Automatic tuning is effective when station signals are
strong and there is no interference.
PRESET/BAND
AUTO/MAN'L
DISC DIRECT
A/B/C/D/E
PRESET/BAND
PRESET/TUNING
MEMORY
AUTO/MAN’L
SILENT
PRESET/TUNING
u/d
INPUT H / G
■ Automatic tuning
1
Press INPUT H / G (TUNER on the remote
control) to select TUNER as the input source.
2
Press PRESET/BAND to select the reception
band. (“FM” or “AM”)
Each time PRESET/BAND is pressed, the mode
changes as follows:
FM (Tuning mode) ^ AM (Tuning mode) ^ (Preset
mode) ^ FM (Tuning mode) ^ ...
y
• Make sure that the colon (:) turns off when the mode switches
to the tuning mode.
3
Press AUTO/MAN’L so that the “AUTO”
indicator lights up on the front panel display.
4
Press PRESET/TUNING u / d once to begin
automatic tuning.
Press u to tune in to a higher frequency, or press d
to tune in to a lower frequency.
y
• Use the manual tuning method if the tuning search does not
stop at the desired station because the signal is weak.
• When tuned in to a station, the “TUNED” indicator lights up
and the frequency of the received station is shown on the front
panel display.
54
y
• Manually tuning in to an FM station will automatically change
the reception mode to monaural to increase the signal quality.
TUNING
Automatic preset tuning options
You can select the preset group and number from which
this unit will store FM stations and/or begin tuning toward
lower or higher frequencies.
Presetting stations
PRESET/BAND
MEMORY
1
DISC DIRECT
A/B/C/D/E
PRESET/BAND
PRESET/TUNING
MEMORY
AUTO/MAN’L
SILENT
A/B/C/D/E
PRESET/TUNING
u/d
AUTO/MAN'L
(After keeping MEMORY pressed for more than 3
seconds)
Press A/B/C/D/E and PRESET/TUNING u / d
to select the preset number under which the
first station will be stored.
Automatic preset tuning will stop when stations have
all been stored up to E8.
3
Press PRESET/BAND to turn off the colon (:)
and then press PRESET/TUNING u / d.
When pressing d, automatic preset tuning begins
from the frequency currently displayed toward the
lower frequencies, and when pressing u, it begins
toward the higher ones.
1
2
Press PRESET/BAND to select the FM band.
3
Press and hold MEMORY for more than
3 seconds.
The preset number and the “MEMORY” and
“AUTO” indicators flash. Then, after about
5 seconds, automatic preset tuning begins from the
frequency currently displayed toward the higher
frequencies.
When automatic preset tuning is completed, the front
panel display shows the frequency of the last preset
station.
Press AUTO/MAN’L so that the “AUTO”
indicator lights up on the front panel display.
■ Manually presetting stations
You can also store up to 40 stations (8 stations x 5
groups) manually.
1
Tune in to a station.
See page 54 for tuning instructions.
When tuned in to a station, the front panel display
shows the frequency of received station.
2
Press MEMORY.
The “MEMORY” indicator flashes for about
5 seconds.
3
Press A/B/C/D/E repeatedly to select a preset
station group (A to E) while the “MEMORY”
indicator is flashing.
The group letter appears and make sure that the
colon (:) appears on the front panel display.
4
Press PRESET/TUNING u / d to select a
preset station number (1 to 8) while the
“MEMORY” indicator is flashing.
Press u to select a higher preset station number.
Press d to select a lower preset station number.
y
• When a station data is stored under a preset number, the
frequency and reception band are also stored.
• You can manually replace a preset station with another FM or
AM station by simply following the procedure in the section
“Exchanging preset stations” on page 56.
• If the number of the received stations does not reach E8,
automatic preset tuning has automatically stopped after
searching all stations.
Notes
TUNING
2
■ Automatically presetting stations
(for FM stations)
This function enables this unit to automatically tune in to
FM stations with strong signals, and to store up to 40 (8
stations x 5 groups) of those stations in order. This feature
enables you to easily tune in to any preset station by
selecting the preset station number.
Follow steps 1 and 2 described in
“Automatically presetting stations (for FM
stations)” on the left.
• Any stored station data existing under a preset number is
cleared when you store a new station under that preset number.
• Only FM stations with sufficient signal strength are stored
automatically by automatic preset tuning. If the station you
want to store is weak in signal strength, tune in to it manually
in the monaural mode, and store it by following the procedure
in “Manually presetting stations”.
English
55
TUNING
5
6
Press MEMORY on the front panel while the
“MEMORY” indicator is flashing.
The station band and frequency appear on the front
panel display with the preset group and number you
have selected.
Exchanging preset stations
You can exchange the assignment of two preset stations.
The example below describes the procedure for
exchanging preset station “E1” with “A5”.
Repeat steps 1 to 5 to store other stations.
PRESET/BAND
Notes
DISC DIRECT
• Any stored station data existing under a preset number is
cleared when you store a new station under that preset number.
• The reception mode (stereo or monaural) is stored along with
the station frequency.
A/B/C/D/E
A/B/C/D/E
CD
SHIFT
DVD
AMP
ENTERTAINMENT
HALL
JAZZ
ROCK
1
2
3
4
SPORTS
SETUP
MONO MOVIE
ANGLE
MOVIE 1
MARKER
MOVIE 2
5
6
7
8
PLAY MODE
SELECT
REPEAT
MATRIX 6.1
A–B
STEREO
0
>–10
/DTS
9
TOP MENU
LEVEL
GROUP
MENU
SET MENU
PRESET
CH
ENTER
CH
Press and hold PRESET/BAND for more than
3 seconds.
“E1” appears and the “MEMORY” indicator flashes
on the front panel display.
3
Tune in to preset station “A5” by using the
A/B/C/D/E and PRESET/TUNING u / d.
“A5” appears and the “MEMORY” indicator flashes
on the front panel display.
4
Press PRESET/BAND again.
“EDIT E1-A5” appears on the front panel display,
and then the preset stations are exchanged.
ABCDE
PRESET u, d
PRESET
TEST
ON SCREEN
B. BOOST
RETURN
VOL
(U.S.A. model)
1
Press ABCDE (A/B/C/D/E on the front panel)
to select the preset station group.
The preset group letter appears on the front panel
display and changes each time you press ABCDE.
2
Press PRESET u / d (PRESET/TUNING
u/ d on the front panel) to select a preset
station number (1 to 8).
The preset group and number appear on the front
panel display along with the station band and
frequency, and the “TUNED” indicator lights up.
PRESET/TUNING
u/d
2
PAGE
ABCDE
56
108_S100_54-56_EN
56
AUTO/MAN’L
Tune in to preset station “E1” by using the
A/B/C/D/E and PRESET/TUNING u / d.
See “Tuning in to a preset station” at left.
CANCEL
MUTE
MEMORY
1
VIDEO 1
CODE SET
PRESET/TUNING
SILENT
Tuning in to a preset station
You can tune any desired station simply by selecting the
preset station number under which it was stored.
PRESET/BAND
02.5.13, 1:34 PM
OPERATING OTHER COMPONENTS USING THE REMOTE CONTROL
Setting the manufacturer code (remote control signal
assigned to each manufacturer) for your TV, VCR or MD/
CD recorder on the remote control allows you to operate
not only the DVX-S100 but also your TV, VCR or MD/
CD recorder using the remote control.
Note
2
Keeping CODE SET pressed, enter the 1digit device code and the 2-digit
manufacturer code for the component to be
controlled using the numeric buttons.
You can release CODE SET after entering the code.
y
• Depending on the model, certain components from other
manufacturers cannot be controlled, or only limited functions
can be controlled, even though the proper manufacturer code
has been set. If you encounter this problem, please use the
remote control supplied with the component.
Setting the manufacturer code
Manufacturer codes can be set for TV, VCR and MD/
CD-R buttons only.
• TV manufacturer codes can be set for the TV button only.
However, any of the manufacturer codes can be set for the VCR
and MD/CD-R buttons.
POWER
TV
TV
POWER
AV
AV
SLEEP
TV MODE
INPUT
CH
TUNER
VOL
MUTE
MD
CD–R
MD/CD-R
VCR
VCR
AUDIO
SUBTITLE
REC
VIDEO 2
3
Press POWER (TV or AV) and check that the
component to be controlled turns on and off
(standby).
Precautions when performing the setting
You can operate the component using the TV, VCR or
MD/CD-R operation buttons on the remote control once
the manufacturer code is set properly. If unsuccessful,
perform the procedure from step 1 again. Pay attention to
the following points when you perform the procedure.
• Check that the correct remote control selector button
has been selected when setting the manufacturer code.
• If more than one code is given for a manufacturer, try
entering each code in the order given.
• Remove and replace the remote control’s batteries
(complete this step within 2 minutes) and then perform
the procedure. While replacing the batteries, be sure not
to press any button on the remote control. Doing so
may erase the manufacturer code which has been set
for other remote control selector buttons.
VIDEO 1
CODE SET
CODE SET
CD
SHIFT
DVD
AMP
ROCK
ENTERTAINMENT
HALL
JAZZ
1
2
3
4
SPORTS
SETUP
MONO MOVIE
ANGLE
MOVIE 1
MARKER
MOVIE 2
5
/DTS
6
7
8
PLAY MODE
SELECT
REPEAT
MATRIX 6.1
A–B
STEREO
0
>
–10
CANCEL
9
TOP MENU
LEVEL
GROUP
MENU
SET MENU
PRESET
CH
Numeric buttons
PAGE
MUTE
ABCDE
ENTER
CH
To reset the manufacturer code to the
factory-set code
REMOTE CONTROL FEATURES
Note
• The manufacturer code 99 has been set for the remote control
selector buttons (TV, VCR and MD/CD-R) at the factory.
Follow steps 1 to 2 for the procedure “Setting the
manufacturer code”, and enter the device code for the
component and “99” while pressing CODE SET in step 2.
(It is not necessary to follow step 3.)
PRESET
TEST
ON SCREEN
B. BOOST
RETURN
VOL
(U.S.A. model)
1
While pressing CODE SET, press the input
selector button (TV, VCR, MD/CD-R) for which
the manufacturer code is to be set.
Only one manufacturer code can be set for each input
selector button.
Note
• Keep pressing CODE SET between step 1 and 2.
English
• Refer to “LIST OF MANUFACTURER’S
CODES” at the end of this manual.
57
OPERATING OTHER COMPONENTS USING THE REMOTE CONTROL
■ Table of control buttons
When you press the input selector button for which a
manufacturer code has been set, many buttons on the
remote control function differently to operate each
component as shown in the table below.
1
POWER
2
TV
POWER
AV
SLEEP
TV MODE
3
INPUT
TUNER
CH
VOL
MD
MUTE
CD–R
AUDIO
SUBTITLE
When you press the TV button, the TV is automatically
turned on. The AV components such as VCR are turned
on when you press the AV button after pressing the
corresponding input selector buttons.
VCR
REC
4
VIDEO 2
VIDEO 1
CODE SET
CD
SHIFT
DVD
AMP
ROCK
ENTERTAINMENT
HALL
5
JAZZ
1
2
3
4
SPORTS
SETUP
MONO MOVIE
ANGLE
MOVIE 1
MARKER
MOVIE 2
5
6
7
8
PLAY MODE
SELECT
REPEAT
MATRIX 6.1
A–B
STEREO
0
>
–10
CANCEL
/DTS
9
TOP MENU
LEVEL
GROUP
MENU
SET MENU
PRESET
CH
ENTER
6
PAGE
MUTE
ABCDE
CH
PRESET
TEST
ON SCREEN
B. BOOST
RETURN
VOL
(U.S.A. model)
Component
VCR
Control
button
1 AV
*1Power
TV
CD/MD recorder
*3VCR power
*1Power
2 TV
* TV power
TV power
*2TV power
3 TV CH +
*2TV channel up
TV CH –
2
TV channel up
*2TV channel up
2
TV channel down
*2TV channel down
2
* TV channel down
TV VOL +
* TV volume up
TV volume up
*2TV volume up
TV VOL –
*2TV volume down
TV volume down
*2TV volume down
TV MUTE
* TV mute
TV mute
*2TV mute
TV INPUT
*2TV input
TV input
*2TV input
2
4
4 * REC
Rec
* VCR rec
Rec (MD)
w
Play
*3VCR play
Play
e
Search backward
*3VCR search backward
Search backward
3
3
r
Search forward
* VCR search forward
Search forward
d
Pause
*3VCR pause
Pause
t
–
–
Skip backward
y
–
–
Skip forward
a
Stop
*3VCR stop
Stop
5 1-9, 0, ≥10
–
–
Numeric buttons
6 CH +
VCR channel up
–
–
VCR channel down
–
–
CH –
*1 This button functions only when the original remote control of the component has POWER button.
*2 These buttons can operate your TV without switching the input if the manufacturer code is set in TV.
*3 These buttons can operate your VCR without switching the input to VCR if the manufacturer code is set in input selector buttons
(except TV).
*4 Only when pressing this button twice in quick succession within one second, the button functions.
y
• If the manufacturer code of TV has been set for the TV button, the control buttons 2 and 3 can also operate your TV even if any
input selector button is pressed.
58
SET MENU
The SET MENU consists of 9 items including the speaker
mode setting. Choose the appropriate item and adjust or
select the values as necessary.
y
• You can adjust the items on the SET MENU while playing a
source.
Adjusting the items on the SET
MENU
Adjustment should be made with the remote control.
VIDEO 1
List of SET MENU items
CODE SET
CD
SHIFT
DVD
AMP
HALL
JAZZ
ROCK
ENTERTAINMENT
1
2
3
4
SPORTS
SETUP
MONO MOVIE
ANGLE
MOVIE 1
MARKER
MOVIE 2
5
/DTS
6
7
8
PLAY MODE
SELECT
REPEAT
MATRIX 6.1
A–B
STEREO
0
>–10
CANCEL
9
TOP MENU
LEVEL
Items
Initial settings
u, d
CH
1
GROUP
MENU
SET MENU
PRESET
PAGE
MUTE
AMP
DSP program
buttons
SET MENU
ABCDE
ENTER
CH
SPEAKER SET
A CENTER
B FRONT
C REAR LR
D BASS
E F. Level
SML (small)
SMALL
SML (small)
SWFR
Nrm (Normal)
LFE LEVEL
SP LFE
HP LFE
0 dB
0 dB
3
SP DLY TIME
0 ms
4
D. RANGE
SP D.R
HP D.R
MAX
MAX
5
L/R BALANCE
0 dB for L/R
y
6
HP TONE CTRL
HP BASS
HP TRBL
0 dB
0 dB
4
I/O ASSIGN
[A] OPTICAL INPUT
[B] COAXIAL INPUT
VIDEO 1
MD/CD-R
8
INPUT MODE
AUTO
Press j / i once to enter the setup mode of
the selected item.
The last setting you adjusted appears on the front
panel display.
Depending on the item, press u/d to select a sub
item.
5
9
SP/PRE OUT
SP
Press j / i repeatedly to change the setting
of the item.
6
Press u/d repeatedly until the menu
disappears or simply press one of the DSP
program buttons to exit SET MENU.
2
In the descriptions for each item from the following page,
the default setting is indicated in bold.
TEST
ON SCREEN
B. BOOST
RETURN
VOL
j, i
(U.S.A. model)
Note
• Some items require extra steps.
1
2
3
Press AMP.
Press SET MENU to enter the SET MENU.
Press u/d repeatedly to select the item you
want to adjust (1 to 9).
ADJUSTMENTS
7
PRESET
• By pressing SET MENU repeatedly, you can select items in the
same order as when pressing d.
English
59
SET MENU
1 SPEAKER SET (speaker mode
settings)
Use this feature to select suitable output modes for your
speaker configuration.
If you do not use one or any of the included speakers, or
if you use other speakers instead of the included speakers,
set the following.
Note
• When 96-kHz sampling digital signals are input to this unit,
some items are not affected.
■ 1A CENTER (center speaker
mode)
By adding a center speaker to your speaker configuration,
this unit can provide better dialog localization for several
listeners and superior synchronization of sound and
images.
Choices: LRG (large), SML (small), NON (none)
LRG
Select this if you have a large center speaker. The entire
range of the center channel signal is directed to the center
speaker.
SML
Select this if you have a small center speaker. The lowfrequency signals (90 Hz and below) of the center
channel are directed to the speakers selected with “1D
BASS”.
NON
Select this if you do not have a center speaker. All of the
center channel signals are directed to the front left and
right speakers.
60
■ 1B FRONT (front speaker mode)
Choices: LARGE, SMALL
LARGE
Select this if you have large front speakers. The entire
range of the front left and right channel signal is directed
to the front left and right speakers.
SMALL
Select this if you have small front speakers. The lowfrequency signals (90 Hz and below) of the front channel
are directed to the speakers selected with “1D BASS”.
Note
• When you select FRONT for “1D BASS”, the low-frequency
signals (90 Hz and below) of the front channel are directed to
the front speakers even if you select SMALL for the front
speaker mode.
■ 1C REAR LR (rear speaker mode)
Choices: LRG (large), SML (small), NON (none)
LRG
Select this if you have large rear left and right speakers or
if a rear subwoofer is connected to the rear speakers. The
entire range of the rear channel signal is directed to the
rear left and right speakers.
SML
Select this if you have small rear left and right speakers.
The low-frequency signals (90 Hz and below) of the rear
channel are directed to the speakers selected with “1D
BASS”.
NON
Select this if you do not have rear speakers.
y
• This unit is set in the virtual CINEMA DSP mode when you
select NON for “1C REAR LR”.
SET MENU
■ 1D BASS (LFE/bass out mode)
LFE signals carry low-frequency effects when this unit
decodes a Dolby Digital or DTS signal. Low-frequency
signals are defined as 90 Hz and below. The Lowfrequency signals can be directed to both front left and
right speakers, and the subwoofer (subwoofer can be used
for both stereo reproduction and the DSP program).
Choices: SWFR (subwoofer), FRONT, BOTH
SWFR
Select this if you use a subwoofer. The LFE signals are
directed to the subwoofer.
FRONT
Select this if you do not use a subwoofer. The LFE signals
are directed to the front speakers.
BOTH
The LFE signals are directed to the subwoofer. Lowfrequency signals designated to the front channels in
accordance with other speaker mode settings are directed
to both front speakers and a subwoofer.
2 LFE LEVEL
Use this feature to adjust the output level of the LFE
(low-frequency effect) channel when playing back a
Dolby Digital or DTS signal. Adjust the LFE level
according to the capacity of your subwoofer or
headphones.
Control range:
SPEAKER
(SP LFE) ............. –20 to 0 dB
HEADPHONE
(HP LFE) ............. –20 to 0 dB
Initial setting: 0 dB
1
2
Press d/u to select the item to be adjusted.
Press j to adjust the LFE level.
ADJUSTMENTS
■ 1E F. Level (front level mode)
Change this setting if you cannot match the output level
of the center and rear (L/R) speakers with that of the front
speakers because of unusually high-efficiency
performance from the front speakers.
Choices: Nrm (Normal), –10 dB
Nrm
Select this if you can match the output level of the center
and rear speakers with that of the front speakers when
using the test tone.
–10 dB
Select this if you cannot match the output level of the
effect speakers with that of the front speakers when using
the test tone.
English
61
SET MENU
3 SP DLY TIME (speaker delay
time)
Use this feature to adjust the delay of the center channel
sounds. This feature works when there is sound output
from the center speaker, with a source like Dolby Digital
or DTS, etc. Ideally, the center speaker should be the
same distance from the main listening position as the left
and right speakers.
However, in most home situations, the center speaker is
placed in line with the front speakers. By delaying the
sound from the center speaker, the apparent distance from
the center speaker to the main listening position can be
adjusted to make it seem the same as the distance
between the front left and right speaker to the listening
position. Adjusting the delay time for the center speaker
is especially important for giving depth to the dialogue.
Control range:
CENTER ............. 0 to 5 ms
Initial setting:
CENTER ............. 0 ms
Press j / i to increase or decrease the delay
of the center channel sounds.
Center speaker image
RL
C
Use this feature to adjust the dynamic range. This setting
is effective only when this unit is decoding Dolby Digital
signals.
Choices: MAX, STD (standard), MIN (minimum)
MAX
Select the “MAX” for feature films.
STD
Select the “STD” for general use.
MIN
Select the “MIN” for listening to sources at low volume
levels.
Note
• Some types of the Dolby Digital software do not support
“MIN” for the dynamic range. If “MIN” is selected to play this
type of software, the volume may be extremely lowered fall
greatly, sharply. If this happens, select “MAX” or “STD”.
5 L/R BALANCE (balance of the
front left and right speakers)
Use this feature to adjust the balance of the output level
from the front left and right speakers.
Control range: 20 steps each for L/R
Initial setting: 0 dB for L/R
C
L
4 D. RANGE (dynamic range)
R
RR
Press i to decrease the output level for the
front left speaker. Press j for the front right
speaker.
6 HP TONE CTRL (headphone tone
control)
Use this feature to adjust the level of the bass and treble
when you use your headphones.
y
• Increasing the delay by 1 ms simulates moving the speakers
about 30 cm (one foot) farther away from the listening position.
Control range (dB):
BASS ................... –6 to +3
TRBL (treble) ..... –6 to +3
Initial setting:
BASS ................... 0 dB
TRBL .................. 0 dB
Press i to increase the level of the bass and treble, and
press j to decrease the level.
62
SET MENU
7 I/O ASSIGN (input assignment)
It is possible to assign jacks according to the component
to be used if this unit’s DIGITAL INPUT jack settings
(component names for jacks) differ from that component.
This makes it possible to change the jack assignment and
effectively connect more components.
Once you assign, you can select that component with
INPUT H / G on the front panel (or the input selector
buttons on the remote control).
■ [A] OPTICAL INPUT jack
Choices: VIDEO 1, VIDEO 2, VCR, MD/CD-R
■ [B] COAXIAL INPUT jack
Choices: VIDEO 1, VIDEO 2, VCR, MD/CD-R
Note
• When you connect a component to both the COAXIAL and
OPTICAL jacks, priority is given to the input signals from the
COAXIAL jack.
8 INPUT MODE (initial input
mode)
Use this feature to designate the input mode for sources
connected to the digital input jacks when you turn on this
unit.
Choices: AUTO, LAST
AUTO
Select this to allow this unit to automatically detect the
type of input signal and select the appropriate input mode.
LAST
Select this to set this unit to automatically select the last
input mode used for the respective source.
9 SP/PRE OUT (output source
settings)
Choices: SP, PRE
PRE
Select this to direct signals to 6CH PREOUT jacks or if
you connect your external amplifier to 6CH PREOUT
jacks on this unit. (No sound is output from the speakers
connected to the subwoofer (SW-S100).)
ADJUSTMENTS
SP
Select this to direct signals to the speakers connected to
the subwoofer (SW-S100). (No sound is output from 6CH
PREOUT jacks.)
English
63
110_S100_59-66_EN
63
02.5.13, 1:35 PM
ADJUSTING THE LEVEL OF THE EFFECT SPEAKERS
You can adjust the output level of each effect speaker
(center, rear left and right, and subwoofer) while listening
to a source.
■ For 5ch Stereo
You can adjust the volume level for each channel in 5channel stereo mode.
VIDEO 1
CODE SET
CD
SHIFT
DVD
AMP
HALL
JAZZ
ROCK
ENTERTAINMENT
1
2
3
4
SPORTS
SETUP
MONO MOVIE
ANGLE
MOVIE 1
MARKER
MOVIE 2
5
/DTS
6
7
8
PLAY MODE
SELECT
REPEAT
MATRIX 6.1
A–B
STEREO
0
>–10
CANCEL
9
LEVEL
TOP MENU
LEVEL
GROUP
MENU
SET MENU
PRESET
AMP
PAGE
MUTE
Control range: 0 to 100%
Initial Setting: 100%
• CT level (Center level)
• RL level (Rear left level)
• RR level (Rear right level)
ABCDE
u, d
VIDEO 1
CH
ENTER
CH
PRESET
TEST
ON SCREEN
B. BOOST
RETURN
VOL
j, i
CODE SET
CD
SHIFT
DVD
AMP
ENTERTAINMENT
HALL
JAZZ
ROCK
1
2
3
4
SPORTS
SETUP
MONO MOVIE
ANGLE
MOVIE 1
MARKER
MOVIE 2
5
/DTS
6
7
8
PLAY MODE
SELECT
REPEAT
MATRIX 6.1
A–B
STEREO
0
>–10
CANCEL
9
TOP MENU
LEVEL
GROUP
MENU
SET MENU
PRESET
CH
(While playing a source)
1
2
Press LEVEL repeatedly to select the
speaker(s) you want to adjust.
Each time you press LEVEL, the selected speaker
changes and appears on the front panel display as
follows: center, rear right, rear left and subwoofer.
y
• Once you press LEVEL, you can also select the speaker(s) to
be adjusted by pressing d / u.
Press j / i to adjust the speaker output level.
• The control range for the center or rear left and
right speakers is from +10 dB to –10 dB.
• The control range for the subwoofer is from
+10 dB to –10 dB.
Notes
• When the speaker output modes for “1A CENTER” and “1C
REAR LR” are set to NON, and “1D BASS” to FRONT, the
output level of those speakers cannot be adjusted because there
is no sound coming from these speakers.
• When you adjust the output level with LEVEL, the settings you
made with the test tone will be changed.
• We recommend adjusting the speakers by following the steps
described in “Using the test tone” on page 20.
64
MUTE
ENTER
CH
PRESET
TEST
ON SCREEN
B. BOOST
RETURN
VOL
j, i
Press AMP.
CENTER (Center speaker) ^ R SUR. (Rear right
speaker) ^ L SUR.(Rear left speaker) ^ SWFR
(Subwoofer) ^ CENTER (Center speaker)...
3
PAGE
ABCDE
u, d
(U.S.A. model)
AMP
4
(U.S.A. model)
(While playing a source)
1
2
3
Press AMP.
4
Press j / i to adjust the speaker output level.
Press “4” button to select 5ch Stereo.
Press u / d repeatedly to select the
speaker(s) you want to adjust.
Notes
• During the 5ch Stereo mode, the output level adjusted with the
test tone or LEVEL is replaced with the level adjusted in the
5-channel stereo mode.
• When the speaker output modes for “1A CENTER” and “1C
REAR LR” are set to NON, the output level of those speakers
cannot be adjusted because there is no sound coming from
these speakers.
CHANGING THE PARAMETER SETTINGS FOR DSP PROGRAMS
The following table shows factory-set delay time.
Adjusting the delay time
Program
You can adjust the time difference between the beginning
of the sound from the front speakers and the beginning of
the sound effect from the rear speakers. The larger the
value, the later the sound effect is generated. The delay
time can be individually adjusted to all DSP programs.
1
CONCERT HALL
45
2
JAZZ CLUB
30
3
ROCK CONCERT
15
4
DISCO
26
GAME
36
CONCERT VIDEO
21
5
TV SPORTS
10
6
MONO MOVIE
69
7
70 mm SPECTACLE
23
DGTL SPECTACLE
15
DTS SPECTACLE
15
Spectacle 6.1
15
70 mm SCI-FI
20
Sci-Fi 6.1
15
DGTL SCI-FI
15
DTS SCI-FI
15
70 mm ADVENTURE
20
DGTL ADVENTURE
15
DTS ADVENTURE
15
Adventure 6.1
15
70 mm GENERAL
20
DGTL GENERAL
15
DTS GENERAL
15
General 6.1
15
PRO LOGIC/NORMAL
15
DOLBY DIGITAL/NORMAL
5
DTS DIGITAL SUR./NORMAL
5
VIDEO 1
CODE SET
CD
SHIFT
DVD
HALL
JAZZ
ROCK
AMP
2
3
4
SETUP
MONO MOVIE
ANGLE
MOVIE 1
MARKER
MOVIE 2
5
/DTS
6
7
8
PLAY MODE
SELECT
REPEAT
MATRIX 6.1
A–B
STEREO
0
>–10
CANCEL
9
GROUP
TOP MENU
LEVEL
MENU
SET MENU
PRESET
DSP program
buttons
PAGE
MUTE
ABCDE
u, d
CH
AMP
ENTERTAINMENT
1
SPORTS
ENTER
CH
PRESET
TEST
ON SCREEN
B. BOOST
RETURN
VOL
j, i
(While playing a source)
3
4
Press AMP.
8
Select a DSP program you want to adjust the
delay time.
Press u / d so that “DELAY” appears on the
front panel display.
Press j / i to adjust the delay time.
Notes
• Adding too much delay will cause an unnatural effect with
some sources.
• The sound is momentarily interrupted while adjusting the delay
time.
9
Matrix 6.1
5
PRO LOGIC/ENHANCED
20
DOLBY DIGITAL/ENHANCED
5
DTS DIGITAL SUR./ENHANCED
5
Enhanced 6.1
5
PRO LOGIC II Movie
15
PRO LOGIC II Music
5
ADJUSTMENTS
(U.S.A. model)
1
2
Preset value (ms)
English
65
CHANGING THE PARAMETER SETTINGS FOR DSP PROGRAMS
Adjusting the parameter settings for PRO LOGIC II Music
■ Changing parameter settings
You can adjust the values of PRO LOGIC II Music
parameters so the sound fields are recreated accurately in
your listening room.
CD
SHIFT
DVD
AMP
ROCK
ENTERTAINMENT
HALL
JAZZ
1
2
3
4
SPORTS
SETUP
MONO MOVIE
ANGLE
MOVIE 1
MARKER
MOVIE 2
5
/DTS
6
7
8
PLAY MODE
SELECT
REPEAT
MATRIX 6.1
A–B
STEREO
0
>
–10
CANCEL
9
9, 0
TOP MENU
LEVEL
GROUP
MENU
SET MENU
PRESET
CH
AMP
Choices:
ENTER
DIMENSION
PAGE
Function:
CH
PRESET
TEST
ON SCREEN
B. BOOST
RETURN
Turning the function on extends the front
stereo image to include the surround
speakers for wraparound effect.
OFF/ON, initial setting is OFF.
MUTE
ABCDE
u, d
PANORAMA
Function:
VIDEO 1
CODE SET
■ PRO LOGIC II Music parameter
descriptions
VOL
j, i
Gradually adjusts the soundfield either
towards the front or towards the rear.
Control range: –3 (towards the rear) to +3 (towards the
front), initial setting is STD (standard).
CT WIDTH (Center width)
Function:
(U.S.A. model)
1
2
Press AMP.
3
4
5
Press u / d to select the parameter.
66
Press the numeric buttons 9 and 0
repeatedly to select PRO LOGIC II Music.
Press j / i to change the parameter value.
Repeat steps 3 and 4 above as necessary to
change other parameters.
Adjusts the center image from the center
and front speakers to varying degrees. The
larger the value, adjusts the center image
towards the front left and right speakers.
Control range: 0 (center channel sound is output only
from center speaker) to 7 (center channel
sound is output only from front left and
right speakers), initial setting is 3.
TROUBLESHOOTING
Refer to the chart below when this unit does not function properly. If the problem you are having is not listed below or if
the instruction below does not help, set this unit to the standby mode, disconnect the power cord, and contact the nearest
authorized YAMAHA dealer or service center.
■ General
Problem
Cause
Remedy
Refer
to page
This unit fails to turn
on when STANDBY/
ON (or POWER (
))
is pressed, or enters
in the standby mode
soon after the power
has been turned on.
The power cord is not connected or the plug
is not completely inserted.
Firmly connect the power cord.
—
This unit has been exposed to a strong
external electric shock (such as lightning and
strong static electricity).
Set this unit in the standby mode, disconnect
the power cord, plug it back in after 30 seconds,
then start operating.
—
No sound.
Incorrect input or output cable connections.
Connect the cables properly. If the problem
persists, the cables may be defective.
14 – 19
An appropriate input source has not been
selected.
Select an appropriate input source with the
input selector buttons.
21
The speaker connections are not secure.
Secure the connections.
The volume is turned down.
Turn up the volume.
21
The sound is muted.
Press MUTE or any operation buttons of this
unit to cancel a mute and adjust the volume.
21
The source that this unit cannot reproduce,
such as a CD-ROM, is being played.
Play a source whose signals this unit can
reproduce.
—
The picture does not
appear.
The output and input for the picture are
connected to different types of video jacks.
Make connections using the same type of video
jacks (S VIDEO or VIDEO (composite)) for
both the input and output.
14
The sound suddenly
goes off.
The sleep timer has functioned.
Turn on the power, and play the source again.
22
Only the speaker on
one side can be
heard.
Incorrect cable connections.
Connect the cables properly. If the problem
persists, the cables may be defective.
Sound can be heard
only from the front
speakers.
The sound effect is off.
Press STEREO to turn it on.
27
A Dolby Surround, Dolby Digital or DTS
decoding DSP program is being used with
material not encoded with Dolby Surround,
Dolby Digital or DTS.
Select another DSP program.
23 – 24
A 96-kHz sampling digital signal is being
input to this unit.
When a 96-kHz sampling digital signal is being
input to this unit, sound is output from the front
speakers only.
17 – 18
APPENDIX
17 – 18
27
English
67
TROUBLESHOOTING
Problem
No sound from the
center speaker.
Cause
Remedy
The output level of the center speaker is set to
minimum.
Raise the level of the center speaker.
64
“1A CENTER” on the SET MENU is set to
NON.
Select the appropriate mode for your center
speaker.
60
One of the Hi-Fi DSP programs (1 to 4) has
been selected (except for 5ch Stereo).
Select another DSP program.
The source encoded with a Dolby Digital or
DTS signal does not have a center channel
signal.
No sound from the
rear speakers.
No sound from the
subwoofer.
Refer
to page
23 – 24
—
The output level of the rear speakers is set to
minimum.
Raise the output level of the rear speakers.
A monaural source is being played with
program 9.
Select another DSP program.
“1D BASS” on the SET MENU is set to
FRONT when a Dolby Digital or DTS signal
is being played.
Select SWFR or BOTH.
61
“1D BASS” on the SET MENU is set to
SWFR or FRONT when a 2-channel source is
being played.
Select BOTH.
61
The source does not contain low bass signals
(90 Hz and below).
64
23 – 24
—
Poor bass
reproduction.
The speaker mode settings (front, center, or
rear) on the SET MENU do not match your
speaker configuration.
Select the appropriate position for each speaker
based on the size of the speakers in your
configuration.
60 – 61
A “humming” sound
can be heard.
Incorrect cable connections.
Firmly connect the audio plugs. If the problem
persists, the cables may be defective.
14 – 15
The volume level
cannot be increased,
or the sound is
distorted.
The component connected to the OUT (Rec)
jacks of this unit is turned off.
Turn on the power to the component.
The sound effect
cannot be recorded.
It is not possible to record the sound effect by
a recording component.
A source cannot be
recorded by a digital
recording
component
connected to the
digital output jack of
this unit.
A source component is not connected to the
digital input jacks of this unit.
Connect the source component to the digital
input jacks of this unit.
This unit does not
operate properly.
The internal microcomputer has been frozen
by an external electric shock (such as
lightning or excessive static electricity) or by
a power supply with low voltage.
Disconnect the AC power cord from the outlet
and then plug it in again after about 30 seconds.
—
There is noise
interference from
digital or highfrequency equipment,
or this unit.
This unit is too close to the digital or highfrequency equipment.
Move this unit further away from such
equipment.
—
—
68
111_S100_67-75_EN
68
—
02.5.13, 1:36 PM
14 – 15
TROUBLESHOOTING
■ Disc playback
Problem
Cause
Remedy
Refer
to page
No response when
buttons pressed.
Some operations may be prohibited by the
disc.
Playback does not
start.
The disc is damaged.
Check the disc carefully; replace it if necessary.
—
There is moisture on the laser pickup.
Wait 1 to 2 hours after switching the unit on
before trying to play a disc.
—
The disc has been loaded upside down.
Reload the disc with the label side facing up.
—
The disc is dirty.
Clean the disc.
30
Alternative
languages fail to be
selected.
No subtitles.
—
An alternative language is not selected with
discs which do not contain more than one
language.
—
In the case of some discs, the alternative
language cannot be selected with “Audio” or
“Subtitle”. Try selecting it from the disc’s
menu if one is available.
—
The disc does not have subtitles.
Subtitle is turned off.
—
Show subtitles by pressing SUBTITLE or using
on-screen menu.
35
The disc or the scene being played does not
support multi-angle.
—
No sound.
Distorted sound.
If the “D.MIX” indicator on the front panel
display goes out while playing a multichannel DVD-Audio disc, sound will only be
output from speakers specified by the disc.
—
Sound “skips”.
The disc is dirty.
Clean the disc.
30
Noise from inside of
the unit.
The disc may be warped.
Replace the disc.
—
Picture distorted
during SEARCH.
Some distortion is normal during SEARCH.
—
No picture.
(U.S.A. and Canada models)
If you play PAL system DVD-Audio, “This
disc is PAL system. The output is sound
only” may appear on the monitor. Picture is
not available because the disc’s video signal
system is different.
—
Picture appears
incorrectly.
Incorrect “TV aspect” setting.
Select the right position. However, it may be
difficult to adjust many DVD-Videos’
widescreen format to fit perfectly in your 4:3
video monitor.
(U.S.A. and Canada models)
PROGRESSIVE is turned on even though the
connected monitor cannot receive the
progressive signals.
Turn off the PROGRESSIVE feature.
38 – 39
(U.S.A. and Canada models)
Due to the editing method or material used on
a DVD, ghosting may occur with progressive
output.
Turn off the PROGRESSIVE feature.
38 – 39
APPENDIX
Angle cannot be
changed.
48
English
69
111_S100_67-75_EN
69
02.5.13, 1:36 PM
TROUBLESHOOTING
Problem
Cause
Remedy
Refer
to page
No on-screen
display.
Go to Display on the SETUP menu, and select
“On” for “On-Screen Messages”.
49
On-Screen Menu
Icons not displayed
or only partially
displayed on the
television.
Press the cursor buttons (u,d) while the
rightmost icon is highlighted to change the
menu bar position.
34
There is a lot of
ghosting.
Use the on-screen menu icons to adjust the
picture quality.
37
“No Play” appears
on the unit’s display.
The disc that this unit cannot play is loaded.
This unit does not
recognize disc (“No
disc” appears on the
display, or the
display shows the
status when no disc
is loaded).
The disc is not placed properly.
—
Place the disc properly.
70
111_S100_67-75_EN
70
02.5.13, 1:37 PM
—
TROUBLESHOOTING
■ Tuner
Problem
FM/
AM
FM
AM
Cause
Remedy
Refer
to page
The preset stations are cleared.
Pre-set the stations once again.
55
FM stereo reception is
noisy.
The characteristics of FM stereo
broadcasts may cause this problem
when the transmitter is too far away or
the antenna input is poor.
Check the antenna connections.
Try using a high-quality directional FM
antenna.
16
Use the manual tuning method.
54
There is distortion, and
clear reception cannot
be obtained even with a
good FM antenna.
There is multipath interference.
Adjust the antenna position to eliminate
multipath interference.
16
The desired station
cannot be tuned in with
the automatic tuning
method.
The station is too weak.
Use a high-quality directional FM antenna.
16
Use the manual tuning method.
54
The desired station
cannot be tuned in with
the automatic tuning
method.
The signal is weak or the antenna
connections are loose.
Tighten the AM loop antenna connections
and orient it for best reception.
16
Use the manual tuning method.
54
There are continuous
crackling and hissing
noises.
Noises result from lightning,
fluorescent lamps, motors, thermostats
and other electrical equipment.
Use an outdoor antenna and a ground wire.
This will help somewhat, but it is difficult to
eliminate all noise.
16
There are buzzing and
whining noises
(especially in the
evening).
A TV set is being used nearby.
Move this unit away from the TV.
—
APPENDIX
Previously preset
stations cannot be
tuned in.
■ Remote control
Problem
The remote control
does not work nor
function properly.
Cause
Remedy
Refer
to page
Wrong distance or angle.
The remote control will function within a
maximum range of 6 m (20 feet) and no more
than 30 degrees off-axis from the front panel.
7
Direct sunlight or lighting (from an
inverter type of fluorescent lamp, etc.) is
striking the remote control sensor of this
unit.
Reposition this unit.
—
The batteries are weak.
Replace all batteries with new ones.
3
The manufacture code is not correctly
set.
Set the code correctly.
57
Try setting another code of the same
manufacturer.
57
Even if the manufacturer code is
correctly set, there are some models that
do not respond to the remote control.
Operate the component using its remote
control.
—
English
71
GLOSSARY
Bitstream
Dolby Pro Logic II
This is the digital form of multiple channel audio data
(eg., 5.1 channel) before it is decoded into its various
channels.
Dolby Pro Logic II is an improved technique used to
decode vast numbers of existing Dolby Surround
software. This new technology enables a discrete 5channel playback with 2 front channels, 1 center channel,
and 2 rear channels (instead of only 1 rear channel for
conventional Pro Logic technology). A music mode is
also available for 2-channel sources in addition to the
movie mode.
CINEMA DSP
Since the Dolby Surround and DTS systems were
originally designed for use in movie theaters, their effect
is best felt in a theater having many speakers and
designed for acoustic effects. Since home conditions,
such as room size, wall material, number of speakers, and
so on, can differ so widely, it’s inevitable that there are
differences in the sound heard as well. Based on a wealth
of actually measured data, YAMAHA CINEMA DSP uses
YAMAHA original sound field technology to combine
Dolby Pro Logic, Dolby Digital and DTS systems to
provide the visual and audio experience of movie theater
in the listening room of your own home.
Component video signal
With the component video signal system, the video signal
is separated into the Y signal for the luminance and the
PB/CB and PR/CR signals for the chrominance. Color can
be reproduced more faithfully with this system because
each of these signals is independent. The component
signal is also called the “color difference signal” because
the luminance signal is subtracted from the color signal.
A monitor with component input jacks is required in
order to use the component signal for output.
Decoder
A decoder restores the coded signals on DVDs to normal.
This is called decoding.
Dolby Digital
This is a method of coding digital signals developed by
Dolby Laboratories. Apart from stereo (2-channel) audio,
these signals can also be 5.1-channel audio. A large
amount of audio information can be recorded on one disc
using this method.
Dolby Pro Logic
A surround system where a 4-channel audio track is
recorded as 2 channels and then is restored to 4 channels
for play. The surround channel is monaural and can
reproduce up to 7 kHz.
72
DTS (Digital Theater Systems)
This surround system is used in many movie theaters
around the world. There is good separation between the
channels, so realistic sound effects are possible.
Dynamic range
Dynamic range is the difference between the lowest level
of sound that can be heard above the noise of the
equipment and the highest level of sound before distortion
occurs.
Film and video
DVDs are recorded using either film or video. Film is
recorded at 24 frames per second, the rate movies are
filmed at, although some recent progressive material is
recorded at 30 frames per second.
Video is recorded at 30 frames per second.
Frame still and field still
A still is shown when you pause a moving picture. A
frame still is made up of two alternating fields, so the
picture may appear blurred, but overall quality is high.
A field still is not blurred, but it has only half the
information of a frame still so picture quality is lower.
Frames are the still pictures that go together to make a
moving picture.
There are about 30 frames shown each second.
One frame is made up of two fields. A regular television
shows these fields one after the other to create frames.
Group
A DVD audio disc is divided into large sections called
“groups” and smaller sections called “tracks”. The
numbers allocated to these sections are called “group
numbers” and “track numbers”.
GLOSSARY
Interlace and progressive output
Matrix 6.1
NTSC, the video signal standard, has 525 interlaced (i)
scan lines, whereas progressive scanning uses twice the
number of scan lines.
This is called 525p. The 525i video signals output from
this unit’s COMPONENT VIDEO OUT terminals (Y, PB /
CB, PR/CR) allow you to enjoy higher quality pictures than
if the signals were output from the video output terminal
or S VIDEO OUT terminal. The COMPONENT
VIDEO OUT terminals are also able to handle 525p
(progressive) video signals which are of even greater
resolution.
The unit incorporates Matrix 6.1 decoder for Dolby
Digital and DTS multi-channel software that enables 6.1channel reproduction by adding the rear center channel to
existing 5.1-channel format. (The rear center channel is
created from rear left and right channels, and outputted
from virtual rear center speaker.) With this additional
channel, you can experience more dynamic and realistic
moving sound especially with scenes with “fly-over” and
“fly-around” effects.
I/P/B
LFE 0.1 channel
This channel is for the reproduction of low bass signals.
The frequency range for this channel is 20 Hz to 120 Hz.
This channel is counted as 0.1 because it only enforces a
low frequency range compared to the full-range
reproduced by the other 5 channels in a Dolby Digital or
DTS 5.1 channel systems.
Linear PCM (pulse code modulation)
PCM is the usual digital method used for music CDs.
DVDs have a greater volume so they use linear PCM,
which has a higher sampling rate. Compressed PCM
signals are called packed PCM (PPCM).
In general, DVD-Video are produced with the intention
that they are viewed on a widescreen television with an
aspect ratio of 16:9. This means you can view most
material with the intended aspect ratio on a widescreen
television.
Material with this ratio will not fit onto a standard
television with an aspect ratio of 4:3. Two styles of
picture, “Pan&Scan” and “Letterbox”, deal with this
problem.
Pan&Scan: The sides are cut off so the picture fills the
screen.
Letterbox: Black bands appear at the top and bottom of
the picture so the picture itself appears in an
aspect ratio of 16:9.
Playback control (PBC)
If a Video CD has “playback control” written on it or its
jacket, it means that particular scenes or information can
be selected for viewing interactively with the television
using the menu screen. This unit can play Video CDs with
playback control.
Using menus to control play of a Video CD is called
“menu play” in these operating instructions.
APPENDIX
MPEG, the video compression standard adopted for use
with DVD-Video, codes frames using these 3 picture
types.
I: Intra coded picture (I-picture)
This is the standard picture and is a complete picture
in itself.
This means it has the best picture quality and is the
best to use when adjusting the picture.
P: Predictive coded picture (P-picture)
This picture is calculated based on past I or Ppictures.
B: Bidirectionally-predictive coded picture (B-picture)
This picture is calculated by comparing past and
future I and P-pictures so it has the lowest volume of
information.
Pan&Scan/Letterbox
Sampling frequency and number of
quantized bits
When digitizing an analog audio signal, the number of
times the signal is sampled per second is called the
sampling frequency, while the degree of fineness when
converting the sound level into a numeric value is called
the number of quantized bits.
English
73
GLOSSARY
SILENT CINEMA
YAMAHA has developed a natural, realistic sound effect
DSP algorithm for headphones.
Parameters for headphones have been set for each sound
field so that accurate representations of all the sound field
programs can be enjoyed using headphones.
S video signal
With the S video signal system, the video signal normally
transmitted using a pin cable is separated and transmitted
as the Y signal for the luminance and the C signal for the
chrominance through the S video cable. Using the S
VIDEO jack eliminates video signal transmission loss and
allows recording and playback of even more beautiful
images.
Title/Chapter
DVD-Video are divided up into large sections, titles, and
smaller sections, chapters. The numbers allocated to these
sections are called title numbers and chapter numbers.
Track
This is the smallest division on DVD-Audio, CD, and
Video CD, and usually equates to a single song.
Virtual CINEMA DSP
YAMAHA has developed a virtual CINEMA DSP
algorithm that allows you to enjoy DSP sound field
surround effects even without center or rear speakers by
using virtual rear speakers.
74
SPECIFICATIONS
AUDIO SECTION
SPEAKER SECTION
• Minimum RMS Output Power
FRONT L/R, CENTER, REAR L/R
1 kHz, 0.9% THD, 6 Ω ........................................................ 33 W
[U.S.A. and Canada models]
20 Hz to 20 kHz, 0.9% THD, 6 Ω ..................................... 25 W
SUBWOOFER
100 Hz, 0.9% THD, 5 Ω ...................................................... 40 W
• Front and Rear Speakers
Model Name ................................................................. NX-S100S
Type ................................................................... 2-way Bass reflex
Speakers
............. 10 cm (4 inch) cone, 1.9 cm (3/4 inch) balanced dome,
magnetically shielded
Impedance ................................................................................ 6 Ω
• Maximum Power (EIAJ)
FRONT L/R, CENTER, REAR L/R (1 kHz, 10% THD, 6 Ω)
............................................................................................ 40 W
SUBWOOFER (100 Hz, 10% THD, 5 Ω)
............................................................................................ 50 W
• Center Speaker
Model Name ................................................................. NX-S100C
Type ................................................................... 2-way Bass reflex
Speakers .............. 7 cm (3 inch) cone x 3, 1.5 cm (5/8 inch) piezo,
magnetically shielded
Impedance ................................................................................ 6 Ω
• Total Harmonic Distortion
FRONT L/R (20 W, 1 kHz) ................................................ 0.05 %
• Signal to Noise Ratio (IHF-A Network, shorted) .................... 95 dB
• Input Sensitivity
VIDEO 1, VIDEO 2, VCR, MD/CD-R .................. 200 mV/47 kΩ
• Output Level (when 200 mV is input.)
PRE OUT (FRONT L/R, CENTER, REAR L/R) ........... max. 1 V
PRE OUT (SUBWOOFER) ............................................ max. 4 V
REC OUT .............................................................. 200 mV/1.2 kΩ
Headphones ............................................................ 165 mV/100 Ω
VIDEO SECTION
TUNER SECTION
• FM Tuning Range
[U.S.A. and Canada models] ............................ 87.5 to 107.9 MHz
[Other models] .................................................. 87.5 to 108.0 MHz
• AM Tuning Range
[U.S.A. and Canada models] ............................... 530 to 1710 kHz
[U.K., Europe and Australia models] .................. 531 to 1611 kHz
[General model] ................................... 530/531 to 1710/1611 kHz
GENERAL
• Power Supply
[U.S.A. and Canada models] ............................... AC 120 V/60 Hz
[Australia model] ................................................. AC 240 V/50 Hz
[U.K. and Europe models] ................................... AC 230 V/50 Hz
[General model] ........................................... AC 220/240 V, 50 Hz
• Power Consumption
DVR-S100 ............................................................................. 40 W
SW-S100 .............................................................................. 160 W
• Standby Power Consumption
DVR-S100
[General model] .................................................................... 0.5 W
[Other models] ...................................................................... 0.4 W
APPENDIX
• Video Signal Level
Video .......................................................................... 1 Vp-p/75 Ω
S Video (Y/C)
[U.S.A., Canada and General models] .... 1 Vp-p/0.286 Vp-p/75 Ω
[Australia, U.K. and Europe models] .......... 1 Vp-p/0.3 Vp-p/75 Ω
Component (Y/PB, PR)
[U.S.A., Canada, General and Australia models]
.................................................................. 1 Vp-p/0.7 Vp-p/75 Ω
Signal to Noise Ratio ............................................................ 50 dB
• Subwoofer
Model Name .................................................................... SW-S100
Type ........ Advanced YAMAHA Active Servo Technology system
Speaker ............ 16 cm (6-1/2 inch) woofer, magnetically shielded
• Laser pickup
Wave length ........................................................................ 665 nm
Laser power .................................................................... CLASS II
Laser output ........................................ Max. 1.0 mW (Continuous)
Output value determined by 21 CFR CHAPTER1,
SUBCHAPTER J
• Dimensions (W x H x D)
DVR-S100 ....................................................... 435 x 84 x 360 mm
(17-1/8” x 3-3/8” x 14-3/16”)
SW-S100 ........................................................ 200 x 395 x 416 mm
(7-7/8” x 15-1/2” x 16-3/8”)
NX-S100C ....................................................... 440 x 85 x 122 mm
(17-3/8” x 3-3/8” x 4-7/16”)
NX-S100S ....................................................... 120 x 250 x 92 mm
(4-3/4” x 9-7/8” x 3-5/8”)
• Weight
DVR-S100 ............................................................................. 6.0kg
(13 lbs 4 oz)
SW-S100 .............................................................................. 10.7kg
(23 lbs 9 oz)
NX-S100C ............................................................................. 1.7kg
(3 lbs 12 oz)
NX-S100S ............................................................................. 1.1kg
(2 lbs 6 oz)
• Usable temperature range .............................................. 5°C to 35°C
• Usable humidity range
.......................... 5% to 90% (There should be no condensation.)
75
111_S100_67-75_EN
75
02.5.13, 1:37 PM
English
• Accessories .............................................................. Refer to page 3.
LIST OF MANUFACTURER’S CODES
Sony
Sylvania
Telefunken
Thomson
Toshiba
Videch
Wards
TV
(Device Code: 2)
Yamaha
Admiral
Aiwa
Akai
Alba
AOC
BellÅïHowell
Bestar
Blaupunkt
Blue sky
Brandt
Brocsonic
Bush
Clatronic
Craig
Croslex
Curtis Mathis
Daewoo
Daytron
Dual
Emerson
Ferguson
First line
Funai
Fisher
Fraba
GE
Goodmans
Grundig
Hitachi
ICE
Irradio
Itt/Nokia
JC Penny
JVC
Kendo
KTV
LG (Goldstar)
Loewe
LXI
Magnavox
Matsui
Mitsubishi
NEC
Nokia
Nokia Oceanic
Nordmende
Onwa
Panasonic
Philco
Philips
Pioneer
Portland
Quasar
Radio Shack
RCA
SABA
Samsung
Sanyo
Schneider
Scott
Sharp
Siemens
Signature
I
99
92
94
95
96
97
92
98
29
98
23
97
96
98
24
25
97
97
39
98
97
23
98
77
95
98
93
96
29
97
96
96
44
93
96
98
97
97
98
93
97
95
99
97
44
45
65
96
34
97
25
26
97
34
99
93
23
97
95
96
97
92
29
92
92
93
76
96
63
97
69
23
92
97
97
25
64 65 66
66
26 67
42
39 32
VCR
(Device Code: 3)
22
26
98 24 27 28
24 39 32
65 66
78
33
97
98
38
39
34 35 36
23
49
42 43
45
97 34 37
46 47
39
98 39 37
48
97 25 26 33
25 39
97 59
52 82
45
66
35 36 53
25 39
35
56
35
93
97
69
39
33
54 55 68
97
34
65
48
79
39 32
56 57 58
66
62 75
72 73 74
Yamaha
Admiral
Aiwa
Akai
Audio Dynamic
BellÅïHowell
Blaupunkt
Brocsonic
Bush
Canon
CGM
Citizen
Craig
Curtis Mathis
Daewoo
DBX
Dimensia
Emerson
Fisher
Funai
GE
Goodmans
Grundig
Hitachi
Instant Replay
Itt/Nokia
JC Penny
JVC
Kendo
Kenwood
LG (Goldstar)
Loewe
Luxor
LXI
Magnavox
Marantz
Marta
Matsui
Memorex
Minolta
Mitsubishi
Multitech
NEC
Nokia
Nokia Oceanic
Okano
Olympic
Orion
Panasonic
Pentax
Philco
Philips
Phonola
Pioneer
Quasar
RCA/PROSCAN
99
95
96
22
92
93
25
27
22
25
96
96
96
97
28
92
33
27
93
97
28
34
32
25
25
93
92
92
96
92
96
96
95
93
25
92
96
96
28
33
99
97
92
93
95
23
25
27
25
33
25
25
37
25
25
25
92 93 94
97 98 29
23 24
94
26
28
32
28 33
34 35
94
34
36
88
33
37
38
33 49 42 43
28
93 94 28 33 49
94 44 45 46 47
94 96
37
96 97 36 49
26 28
94
36
49
44 48 59 52 53
48 54
94 44 83
95
28
28 39 55 78 84 85
49
28
26 28 37 56 57
28
26 28 33 35 49 58 69
Realistic
Samsung
Sansui
Sanyo
Schneider
Scott
Seleco
Sharp
Siemens
Signature 2000
Sony
Sylvania
Symphonic
Tandberg
Tashiro
Tatung
Teac
Technics
Telefunken
Thorn
Toshiba
Universum
W.WHouse
Wards
93
54
94
93
37
99
22
95
93
95
68
97
97
34
96
92
92
25
76
93
35
96
96
95
97 28 36 59 62
58 63 64 65 66
36 67
35 36 48 59 52 54 58
62 82
97
79 72 73 74 75
25 26 28
94
94 97
28
77
96
69 89
27 76
96 36 62
CDR
(Device Code: 4)
Yamaha
Sony
DENON
JVC
Kenwood
Pioneer
Marantz
Philips
Hitachi
99
27
22 23
25
22
26
22
22
24
MD
(Device Code: 5)
Yamaha
Sony
Denon
JVC
Kenwood
Pioneer
Sharp
99 98 22
22
23 24
25
26
27
28
II
U
DVD HOME THEATER SOUND SYSTEM
DVX-S100
DVX-S100: DVR-S100 + NX-S100S + NX-S100C + SW-S100
YAMAHA
YAMAHA
YAMAHA
YAMAHA
YAMAHA
YAMAHA
YAMAHA
ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY
ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND
SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
Printed in
101_S100_H14(U)3.2mm
1
Malaysia
OWNER’S MANUAL
V883340-1
02.5.13, 2:11 PM