THREE-CD CHANGER
MINI-COMPACT SYSTEM
MAX-N22/N25
Instruction Manual
Downloaded From Disc-Player.com Samsung Manuals
Safety Warnings
GB
CLASS 1 LASER PRODUCT
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LASER CLASE 1
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE REAR COVER.
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
This Compact Disc player is classified as a CLASS 1
LASER product.
Use of controls, adjustments or performance of procedures other than those specified herein may result in
hazardous radiation exposure.
CAUTION-INVISIBLE LASER RADIATION
WHEN OPEN AND INTER LOCKS
DEFEATED, AVOID EXPOSURE TO
BEAM.
This symbol indicates that dangerous voltage which can cause electric shock is present inside this unit.
This symbol alerts you to important operating and maintenance instructions accompanying the unit.
WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or
moisture.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
Downloaded From Disc-Player.com Samsung Manuals
Thank you for buying this
SAMSUNG mini-compact system.
Contents
Please take time to read these instructions.
They will allow you to operate your
system with ease and take full advantage
of its features.
SAFETY WARNINGS..............................................................................................................................................................
INSTALLING YOUR MINI-COMPACT SYSTEM
Front Panel View ................................................................................................................................................................
Remote Control ..................................................................................................................................................................
Rear Panel View..................................................................................................................................................................
Where to Install Your Mini-Compact System ......................................................................................................................
Inserting Remote Control Batteries ....................................................................................................................................
Connecting the Loudspeakers ............................................................................................................................................
Connecting Your System to the Power Supply ..................................................................................................................
Connecting the AM (MW)/LW Aerial....................................................................................................................................
Connecting the FM Aerial....................................................................................................................................................
Connecting the SW Aerial (option)......................................................................................................................................
Menu System ......................................................................................................................................................................
Viewing the Various Functions on Your System..................................................................................................................
Setting the Clock ................................................................................................................................................................
2
4
5
6
7
7
7
7
8
8
8
9
9
9
CD-PLAYER
Loading and Changing Compact Discs .............................................................................................................................. 10
Listening to a Compact Disc .............................................................................................................................................. 10
Selecting a Disc in the CD changer .................................................................................................................................... 11
Selecting a Track ................................................................................................................................................................ 11
Selecting a Track with a Two-Digit Number ........................................................................................................................ 11
Searching for a Specific Music Passage on a CD .............................................................................................................. 11
Repeating One or All Tracks on the Compact Discs .......................................................................................................... 12
Programming the Order of Playback .................................................................................................................................. 12
Checking or Changing Programmed Tracks ...................................................................................................................... 13
TUNER
Searching for and Storing the Radio Stations .................................................................................................................... 13
Selecting a Stored Station .................................................................................................................................................. 14
Improving Radio Reception ................................................................................................................................................ 14
TAPE DECK
Listening to a Cassette........................................................................................................................................................ 15
Listening to Two Cassettes in Sequence ............................................................................................................................ 15
Rewinding and Fast-Forwarding a Cassette ...................................................................................................................... 15
Recording a Radio Programme .......................................................................................................................................... 16
Recording a Compact Disc ................................................................................................................................................ 16
Copying a Cassette (Dubbing) ............................................................................................................................................ 16
OTHER FUNCTIONS
Timer Function .................................................................................................................................................................... 17
Cancelling the Timer .......................................................................................................................................................... 17
Setting the System to Switch off Automatically .................................................................................................................. 17
Mute Function...................................................................................................................................................................... 18
Super Bass Sound .............................................................................................................................................................. 18
Selecting an Equalizer Preset ............................................................................................................................................ 18
Power Sound Function........................................................................................................................................................ 18
CD Digital Out Jack (option) .............................................................................................................................................. 19
Microphone Function (option) ............................................................................................................................................ 19
Connecting to an External Source ...................................................................................................................................... 20
Connecting Headphones .................................................................................................................................................... 20
RECOMMENDATIONS FOR USE
Safety Precautions .............................................................................................................................................................. 20
Cleaning Your Mini-Compact System.................................................................................................................................. 21
Precautions When Using Compact Discs .......................................................................................................................... 21
Precautions When Using Audio Cassettes ........................................................................................................................ 21
Before Contacting the After-Sales Service.......................................................................................................................... 21
Technical Specifications ...................................................................................................................................................... 22
Symbols
Downloaded From Disc-Player.com Samsung Manuals
Press
Push
Important
Note
GB
Front Panel View
GB
35
34
1
33
2
32
3
31
R
Standby
4
30
Demo
5
Mono/ST
Band
TUNER
CD
TAPE
AUX
Open/Close
Program/Set
Disc 2
Disc 3
Timer/Clock
CD Repeat
Ro
Vol.
Phones
7
Mic
ic
Class
Mic Volume
Down
MIN
29
Disc Change
ck
6
Timer On/Off
Pop
Disc 1
AI Off/Sleep
Preset/Manual
Hi Speed
Dubbing
Up
S.BASS
MAX
8
9
10
11
28
27
26
25
24
23
CD Synchro /
12
22
13
14
21
15
16
17
20
19
18
1.
2.
3.
4.
5.
6.
7
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
Timer/Clock
Mono/ST
On/Standby
Program/Set
Demo
AI Off/Sleep
Timer On/Off
Headphone Jack Connector
Mic buttons (option)
CD Repeat
Cassette Deck 1
CD Synchro/Record ( )
Play
Rewind
Fast-Forward
Stop/Eject
Pause
Downloaded From Disc-Player.com Samsung Manuals
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
Play
Rewind
Fast-Forward
Stop/Eject
Pause
Cassette Deck 2
CD Track or radio station search
Preset/Manual or Stop button
Disc Change
S. Bass
High Speed Dubbing
Equalizer Selection buttons
CD Compartment Open/Close
Power Sound
Volume
Disc Selection buttons
Function Selection buttons
Compact Disc Compartment
Remote Control
GB
21
On/Standby
Timer
Timer/
On/Off
Clock
20
1
2
19
Preset EQ
Mute
Function
18
3
4
5
6
7
S.Bass
Sleep
CD Repeat
Program
/Set
Mono/ST.
Tuner
Band
Open/
Close
Disc Skip
+10
17
16
15
14
CD
13
8
12
VOL.
9
CD
Tuning
Mode
CD
11
10
VOL.
1.
On/Standby
11. Tuning Mode
2.
S. Bass
12. Volume Increase
3.
Equalizer Mode Selection
13. Play Back/Pause
4.
Program/Set
14. Two-Digit Track Selection
5.
Sleep
15. Disc Number Skip
6.
Open/Close
16. Frequency Band Selection
7.
CD Track Repeat
17. Mono/Stereo Selection
8.
CD Stop
18. Function Selection
9.
CD Track or Radio Station Search
19. Mute
10. Volume Decrease
20. Timer Clock
21. Timer Switch On and Off
Downloaded From Disc-Player.com Samsung Manuals
Rear Panel View
GB
MAX-N25
MAX-N22
1
2
1
3
4
5
2
3
4
SPEAKERS
(IMPEDANCE 6Ω)
(IMPEDANCE 4Ω)
5
6
AC CORD
7
AC CORD
7
6
1. SW Aerial Connector Terminal (option)
1. SW Aerial Connector Terminal (option)
2. CD Digital Out Jack (option)
2. FM Aerial Connector Terminals
3. FM Aerial Connector Terminals
3. AM Aerial Connector Terminal
4. AM Aerial Connector Terminal
4. Aux-Input
5. Aux-Input
5. Loudspeaker Connector Terminals
6. Loudspeaker Connector Terminals
6. Voltage Selector (option)
7. Voltage Selector (option)
7. CD Digital Out Jack (option)
Downloaded From Disc-Player.com Samsung Manuals
Where to Install Your
Mini-Compact System
Connecting the Loudspeakers
GB
To take full advantage of your new mini-compact system, follow
these installation instructions before connecting the unit.
Install the system on a flat, stable surface.
Never place this unit on carpeting.
Never place this unit in an outdoor area.
Maintain an open space of approximately 4 inches (10 cm) on the
sides and rear of the system, for ventilation purposes.
Make sure that you have enough room to open the compact disc
compartment easily.
Place the loudspeakers at a reasonable distance on either side of
the system to ensure good stereo sound.
Direct the loudspeakers towards the listening area.
For optimum performance, make sure that both speakers are placed
at an equal distance above the floor.
The loudspeaker connector terminals are located on the rear
of the system.
There are four terminals on the system:
Two for the left speaker (marked L)
Two for the right speaker (marked R)
To achieve the correct sound quality, connect the:
Red wire to the + terminals
Black wire to the - terminals
1
To connect a wire to a terminal, push the tab as far as it will go:
To the right on the system
2
3
Insert the wire, up to the plastic sheathing, in the hole.
4
Repeat the operation for each wire.
Push the tab back:
To the left on the system, until it clicks into place
Result: The wire is pinched and held firmly in place.
R
Standby
Demo
Mono/ST
Band
TUNER
CD
TAPE
AUX
Open/Close
Program/Set
Disc 2
Disc 3
Timer/Clock
CD Repeat
Disc Change
ck
Timer On/Off
P op
Disc 1
AI Off/Sleep
Ro
Vol.
ic
Class
Phones
Down
Preset/Manual
Hi Speed
Dubbing
Up
S.BASS
L
CD Synchro /
R
Inserting Remote Control Batteries
Insert or replace remote control batteries when you:
Purchase the mini-compact system
Find that the remote control is no longer operating correctly
Connecting Your System to the
Power Supply
When replacing the batteries, use a new set of batteries and
never mix alkaline and manganese batteries.
The main lead must be plugged into an appropriate socket.
1
Place your thumb on the position marked
on the battery compartment
cover (rear of the remote control) and push the cover in the direction of
the arrow.
2
Insert two AAA, LR03 or equivalent batteries, taking care to respect
the polarities:
+ on the battery against + on the remote control
– on the battery against - on the remote control
3
Replace the cover by sliding it back until it clicks into position.
Before plugging your system into a main socket, you must check
the voltage setting (OPTIONAL). If the voltage of the socket does
not correspond to the setting on the rear of the unit, you may
seriously damage your system.
1
2
3
Check the position of the voltage selector on the rear of the system
(OPTIONAL).
Plug the main lead (marked AC Cord on the rear of the system) into
an appropriate socket.
Press the On/Standby button to switch your mini-component system on.
AC CORD
Downloaded From Disc-Player.com Samsung Manuals
Connecting the AM (MW)/LW Aerial
Connecting the FM Aerial
GB
The AM aerial (for long and medium waves) can be:
Placed on a stable surface
Fixed to the wall
The AM aerial connector terminals are located on the rear of the system and are marked AM.
There are two types of aerial, (depending on option chosen).
1
How to connect a COAXIAL TYPE aerial.
Connect a 75Ω antenna to the FM antenna terminal.
Plug the connector on the FM aerial supplied into the coaxial
socket (75Ω) marked FM on the rear of the system.
To avoid noise interference, check that the loudspeaker wires do
not run close to the aerial wires.
Always keep them at least 2 inches (5 cm) away.
Follow the instructions given on Page 13 to tune into a radio
station, and determine the best position for the aerial.
If reception is poor, you may need to install an outdoor aerial.
To do so, connect an outdoor FM aerial to the FM socket on
the rear of the system using a 75Ω coaxial cable (not supplied).
FM
FM AERIAL
(supplied)
2
FM
75Ω COAXIAL CABLE
(not supplied)
How to connect a SCREW TYPE aerial.
The FM aerial connector terminals are located on the rear of
the system and marked FM (75Ω).
Spread the T.form FM aerial out and attach the ends to a wall,
in the position providing the best reception.
R
Connecting the SW Aerial (option)
How to connect a WIRE TYPE aerial.
Spread the SW aerial out and attach the ends to a wall, in the position providing the best reception.
If reception is poor (e.g. distance from transmitter too great, walls
blocking the radio waves, etc.), install an outdoor aerial.
Downloaded From Disc-Player.com Samsung Manuals
Menu System
Setting the Clock
GB
To select the basic functions on your mini-component system
(radio, compact disc, cassette or auxiliary source), press the
corresponding buttons on the front panel or FUNCTION on the
remote control.
Depending on the feature that you select, the multi-function
buttons illuminate.
1
2
Your system is equipped with a clock which allows you to
turn your system on and off automatically. You should set the
clock:
When you purchase the mini-compact system
After a power failure
After unplugging the unit
Remember to reset the time when the clock changes from
winter to summer time and vice verse.
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
Switch the system on by pressing On/Standby.
Result: The function selected just before the system was last
switched off is reactivated.
Press Function the appropriate number of times to select one of the
4 functions available:
TUNER (radio)
CD (compact disc)
TAPE (cassette)
AUX (auxiliary source)
Result: The various sub-options available are indicated by the symbols
displayed on the multi-function buttons; these symbols change
according to the function that you select.
1
2
Switch the system on by pressing On/Standby.
3
Press Program/Set.
Result: The hour flashes.
4
To...
Press...
Increase the hours
Decrease the hours
PRESET/MANUAL UP
PRESET/MANUAL DOWN
Press Timer/Clock twice.
Result: CLOCK is displayed.
5
1On/Standby
Preset EQ
Sleep
Timer
Timer/
On/Off
Clock
When the correct hour is displayed, press Program/Set.
Result: The minutes flash.
6
S.Bass
Mute
2Function
Program
/Set
Mono/ST.
Tuner
7
To...
Press...
Increase the minutes
Decrease the minutes
PRESET/MANUAL UP
PRESET/MANUAL DOWN
When the correct time is displayed, press Program/Set.
Result: The clock starts and is displayed, even when the system is in
standby mode.
You can display the time, even when you are using another function, by pressing Timer/Clock once.
Band
Viewing the Various Functions on
Your System
R
Standby
1
You can view the various functions available on your system.
Demo
1
Press the Demo button.
Result: The various functions available are listed in turn on the display.
All these functions are described in detail in this booklet.
For instructions on how to use them, refer to the appropriate
sections.
2
To cancel this function, press Demo again.
R
Standby
Demo
Mono/ST
Band
TUNER
CD
TAPE
AUX
Program/Set
Disc 1
AI Off/Sleep
Timer On/Off
Disc 2
Disc 3
Timer/Clock
CD Repeat
Disc Change
Vol.
Downloaded From Disc-Player.com Samsung Manuals
Phones
ic
Class
Mono/ST
3,5,7
Band
TUNER
CD
TAPE
AUX
Program/Set
Disc 1
AI Off/Sleep
Phones
Timer On/Off
Disc 2
Disc 3
Timer/Clock
2
4,6
CD Repeat
Disc Change
4,6
Vol.
ic
Class
Down
Preset/Manual
Up
S.BASS
Loading and Changing Compact
Discs
Listening to a Compact Disc
GB
The CD disc changer can contain up to three 12 cm or 8 cm
compact discs without using an adapter.
When you have loaded at least one compact disc into the
player, you can start listening to it.
Always treat your compact discs with care; refer, if necessary, to
the section entitled ÒPrecautions When Using Compact DiscsÓ on
page 21.
Never force the compact disc carrousel when opening and closing the compartment.
Never press down or place objects on the carrousel.
Always treat your compact discs with care; refer, if necessary, to
the section entitled ÒPrecautions When Using Compact DiscsÓ on
page 21.
1
Switch the system on by pressing On/Standby.
2
Press the Open/Close button on the front panel (or
remote control).
Result: The compartment opens.
on the
1
2
Switch the system on by pressing On/Standby.
3
4
Load one or more discs.
Select the CD function by pressing CD on the front panel or
Function one or more times on the remote control.
Press CD (
Place one or two discs in the front slots of the carrousel, with the
label on the discs facing upwards.
Check that the compact disc has been correctly inserted in
the holder before closing the compartment.
4
If you wish to load a third compact disc, press the Disc Change button on the front panel (or Disc Skip on the remote control).
Result: The carrousel rotates by 120°.
5
Close the compartment by pressing the Open/Close button again.
If you wish to start playing a disc directly, you can also
proceed as follows.
5
6
Adjust the volume as required by:
Turning the Vol. knob on the front panel
or
Pressing the VOL. + or - buttons on the remote control
To pause temporarily during playback, press CD (
Press CD (
To play...
on the remote control.
If you have loaded more than one compact disc, they will
be played in turn.
3
7
Press
).
) again to continue disc playback.
when you have finished.
Press...
When playing a disc, you can load new discs without
stopping the current one. To do so, open the compartment by pressing Disc Change and load new discs in
the other two vacant slots (not the one containing the
disc that you are playing). You cannot rotate the carrousel during playback.
When no discs are loaded, the ÒNO DISCÓ indication is
displayed.
The CD player stops automatically after playing the
three discs, if the CD REPEAT function has not been
selected.
Disc 1
CD (
) or Disc 1
Disc 2
Disc 2
Disc 3
Disc 3
Result: The compartment closes automatically and the disc selected
starts playing.
6
) on the front panel or
To change or unload the compact disc changer, repeat Steps 2 to 5.
Keep the compartment closed whenever you are not using it,
to prevent dust from entering.
You can load or unload compact discs when the radio,
tape or auxiliary source function is selected.
1
R
R
Standby
Standby
1
Demo
5
Mono/ST
Demo
4,6, 2
Mono/ST
Band
Band
CD
CD
TAPE
AUX
Disc 1
Timer On/Off
Disc 2
TAPE
Disc 2
Disc 1
Program/Set
AI Off/Sleep
CD
TUNER
TUNER
AUX
Program/Set
Disc 3
AI Off/Sleep
Timer On/Off
Disc 3
Timer/Clock
Timer/Clock
CD Repeat
CD Repeat
Phones
Down
Disc Change
Disc Change
5
Preset/Manual
Vol.
Vol.
4
ic
Class
Phones
ic
Class
Down
Preset/Manual
Up
7
Up
S.BASS
S BASS
5
Mono/ST
Band
TUNER
CD
TAPE
AUX
Open/Close
Program/Set
Disc 1
Timer On/Off
Disc 2
Disc 3
Pop
2,5
Timer/Clock
Mono/ST
CD Repeat
CD
TAPE
AUX
Program/Set
Disc 2
Timer On/Off
Timer/Clock
Downloaded From
Disc-Player.com
Samsung Manuals
Ro
Vol.
Disc 3
Pop
Disc 1
Disc Change
Open/Close
ck
Band
TUNER
ic
Class
Down
Preset/Manual
Up
Hi Speed
Dubbing
Selecting a Track with a Two-Digit
Number
Selecting a Disc in the CD changer
GB
The CD function is automatically selected when DISC SKIP is
pushed.
To select a track with a two-digit number faster, use the +10
key button.
To select a specific disc, press the corresponding Disc (1, 2, 3) button on
the front panel or Disc Skip on the remote control, until the required disc
indicator flashes.
Result: All the discs will be played in turn, starting with the one selected.
1
2
For example, to select the track no.25.
3
Press
If you wish to play the current disc only, press CD Repeat on
the remote control one or more times, until DISC is displayed.
Press +10 two times.
Result: The tens (10, 20 and so on) are displayed.
CD
five times.
Sleep
If you use the Disc (1, 2, 3) function when listening to the
radio or to a tape, the system switches automatically to the CD
mode.
If the disc selected is not loaded, the next disc is played automatically.
CD Repeat
Program
/Set
Mono/ST.
Tuner
Band
Open/
Close
Disc Skip
+10
CD
VOL.
Demo
+
Mono/ST
Band
TUNER
CD
TAPE
AUX
Op
Program/Set
Timer On/Off
Timer/Clock
CD Repeat
CD
CD
CD
Disc Change
Ro
Vol.
ic
Class
Phones
Down
Tuning
Mode
Disc 3
ck
AI Off/Sleep
Disc 2
Pop
Disc 1
Preset/Manual
–
VOL.
Hi
Du
Up
S.BASS
Searching for a Specific Music
Passage on a CD
Selecting a Track
You can select the track you wish to listen to, either when the
compact disc player is stopped or when a disc is playing.
To start playback at the beginning of the...
It is recommended that you turn the volume down before using
this function.
Press...
Next track
Current track
Previous track
Track of your choice
When listening to a compact disc, you can quickly search for
a specific music passage on a track.
To search through the tracks...
twice
or
the
appropriate number
of times.
for at least one second
for at least one second
Sleep
You can also use
and
Press and hold down...
Forwards
Backwards
buttons on the remote control.
CD Repeat
Program
/Set
Mono/ST.
Tuner
Band
Open/
Close
Disc Skip
+10
CD
Demo
Mono/ST
Band
TUNER
CD
TAPE
AUX
Op
Program/Set
Timer On/Off
VOL.
Disc 3
Timer/Clock
CD Repeat
Disc Change
ck
AI Off/Sleep
Disc 2
Pop
Disc 1
Ro
Vol.
ic
Class
Phones
Down
Preset/Manual
Hi
D
CD
CD
Tuning
Mode
Up
S.BASS
VOL.
Downloaded From Disc-Player.com Samsung Manuals
CD
Repeating One or All Tracks on the
Compact Discs
GB
You can repeat indefinitely:
A specific track on a compact disc.
All tracks on the compact disc selected.
All discs loaded in the carrousel
1
2
To repeat...
Press CD REPEAT on the
REMOTE CONTROL one or more
times until...
The current track indefinitely
The selected disc
All discs loaded
REPEAT 1 is displayed
REPEAT DISC is displayed
REPEAT DISC ALL is displayed
8
Press
9
To...
Press...
Listen to the current track again
Listen to the previous track
Listen to the next track
Skip forwards or backwards
one or more tracks
once
twice
once
or
the appropriate
number of times
cancel the selection, press
.
10 To Once
if the compact disc player is stopped
Result: PROGRAM is no longer displayed.
When you wish to stop the Repeat function, press CD Repeat until
DISC ALL or DISC is displayed, or press
.
Sleep
CD Repeat
Program
/Set
Open/
Close
Mono/ST.
to listen to the track selection in the order programmed.
If you open the compartment, the selection is cancelled.
If you select the number of a disc which is not loaded or a track which
does not exist on the CD, the selection skips to the next programmed
track.
Tuner
Band
Disc Skip
+10
CD
VOL.
On/Standby
CD
Tuning
Mode
Timer
Timer/
On/Off
Clock
Mute
Function
Mono/ST.
Tuner
CD
Preset EQ
S.Bass
3,6Program
/Set
Sleep
Programming the Order of Playback
CD Repeat
You can decide:
Open/
Close
1,10
The order in which you listen to the tracks on the discs loaded
Which tracks you do not wish to listen to
You can programme up to 24 tracks.
You must stop the compact disc player before selecting the
tracks.
This feature can be combined with the Repeat function.
If the CD function is selected, stop the player by pressing
8
CD
VOL. +
VOL.
5,9
.
5,9
Tuning
Tuning
Mode
Mode
CD
CD
1
2
3
Band
+10
Disc Skip
CD
VOL. –
VOL.
Load the selected CDs.
Press Program/Set.
Result: The following indications are displayed:
(01 = Programme n°, DI = Disc n°, – – = Track n° on the disc)
R
Standby
4
If necessary, select the disc containing the required track by pressing
the corresponding Disc (1, 2, 3) button.
5
Select the required track by pressing:
to move back through the tracks
to move forward through the tracks
Demo
Band
TUNER
Timer On/Off
To select other tracks, repeat Steps 4 to 6.
Downloaded From Disc-Player.com Samsung Manuals
AUX
Op
CD Repeat
is displayed.
Disc 3
Timer/Clock
4
Disc Change
Ro
Vol.
ic
Class
Phones
Down
7
TAPE
Disc 2
ck
Press Program/Set to confirm your selection.
Result: The selection is stored and
CD
Pop
Disc 1
AI Off/Sleep
6
Mono/ST
Program/Set
Preset/Manual
Up
S.BASS
Hi
D
Searching for and Storing the Radio
Stations
Checking or Changing Programmed
Tracks
GB
You can check or change your selection of tracks at any time.
1
2
Press
3
Press Program/Set again.
Result: The first track selected is displayed, together with the letter
CH (Change).
4
Press Program/Set one or more times until the track to be changed
is displayed.
once if you have started listening to the selection.
Press Program/Set.
If you have already programmed 24 tracks, CH is displayed
instead of PR when you press Program/Set.
5
If necessary, press the corresponding Disc (1, 2, 3) button to change
discs.
6
7
8
Press TUNING
and
You can store up to:
15 FM stations
15 AM stations
15 FM stations
8 MW stations
7 LW stations
15 FM stations
5 MW stations
5 SW1 stations
5 SW2 stations
1
2
Program
Sleep
/Set
2,3,4,7
Mono/ST.
Tuner
Press Preset/Manual on the front panel
or Tuning Mode on the remote control
Manually
One or more times until MANUAL is
displayed.
One or more times until AUTO is
displayed.
Automatically
5
+10
Disc Skip
Select the TUNER function by pressing TUNER on the front panel or
Function on the remote control one or more times.
To search for a
station...
Band
Open/
Close
CD Repeat
Function
Switch the system on by pressing On/Standby.
4
Press CD ( ) to start listening to the selection.
Result: The first track selected is played.
Mute
Select the station to be stored by:
Pressing Preset/Manual Down or Up on the front panel
or
Pressing Tuning
8
CD
1
6
Tuning
Mode
CD
CD
or
on the remote control
To scroll through the frequencies faster when searching manually,
hold down the Preset/Manual Down or Up buttons.
The automatic search procedure may stop on a frequency that
does not correspond to a radio station. If this happens, use the
manual search mode.
VOL.
6
(option)
Select the required frequency band by pressing TUNER again on the
front panel or Band on the remote control.
Result: The appropriate indication is displayed:
FM
Frequency Modulation
AM(MW)
Medium Wave
LW(OPTION)
Long Wave
SW1, SW2(OPTION)
Short Wave
to select a different track.
S.Bass
(option)
3
Press Program/Set to confirm your change.
Preset EQ
(option)
CD
6
Adjust the volume by:
Turning the Vol. knob on the front panel
or
Pressing the VOL. + or – buttons on the remote control
7
Select the stereo or mono mode by pressing Mono/ST.
VOL.
R
Standby
1
Mono/ST
Band
R
8
TUNER
Standby
CD
TAPE
AUX
Open
Program/Set
Timer On/Off
Timer/Clock
Disc 3
5
CD Repeat
ic
Class
Phones
Down
Preset/Manual
1
Up
6
Demo
Ro
Vol.
6
7
Disc Change
ck
AI Off/Sleep
Disc 2
Pop
Disc 1
2,3
Mono/ST
Band
Hi S
Dub
TUNER
Disc 1
S.BASS
CD
TAPE
AUX
Program/Set
AI Off/Sleep
Timer On/Off
Disc 2
Disc 3
Timer/Clock
5
CD Repeat
4
5
Disc Change
Ro
Vol.
ic
Class
Phones
Down
Preset/Manual
Up
S BASS
Downloaded From Disc-Player.com Samsung Manuals
ck
Demo
Searching for and Storing the Radio
Stations (continued)
Improving Radio Reception
GB
8
If you do not want to store the radio station found, revert to Step 4
and search for another station.
Otherwise:
You can improve the quality of radio reception by:
Rotating the FM or AM(MW) aerial
Testing the positions of the FM and AM(MW) aerials before fixing
them permanently
a Press Program/Set.
Result: The programme number and PROGRAM are displayed
for a few seconds.
If reception from a specific FM radio station is poor, press
Mono/ST. to switch from stereo mode to mono. The quality of
the sound will be improved.
b Press Preset/Manual Down and Up to assign a programme
number between 1 and 15.
y
Timer
Timer/
On/Off
Clock
S.Bass
Mute
Function
Program
/Set
Mono/ST.
Tuner
c Press Program/Set to store the radio station.
Result: PROGRAM is no longer displayed and the station is stored.
Preset EQ
9
To store any other radio frequencies required, repeat Steps 3 to 8.
Sleep
The PROGRAM function can be used to assign a new station to
an existing programme number.
CD Repeat
Demo
Band
Open/
Close
Disc Skip
Mono/ST
Band
8
TUNER
CD
TAPE
AUX
Timer On/Off
Disc 3
Timer/Clock
8
CD Repeat
8
Disc Change
Ro
Vol.
ic
Class
Phones
Down
Preset/Manual
VOL.
ck
AI Off/Sleep
Disc 2
Pop
Disc 1
CD
Op
Program/Set
Hi
D
Up
S.BASS
CD
Tuning
Mode
VOL.
Selecting a Stored Station
You can listen to a stored radio station as follows:
1
2
+10
Switch the system on by pressing On/Standby.
Select the TUNER function by pressing TUNER on the front panel or
Function on the remote control one or more times.
3
Select the required frequency band by pressing Tuner Band on the
remote control or TUNER again on the front panel.
4
5
Press the Tuning Mode button until “PRESET” is displayed.
Select the radio station as follows.
To listen to ...
Press ...
Stored station
Tuning
and
to select the
required programme.
Tuning
and
until the
required frequency is displayed.
Another station
Press Tuning Mode again to exit the stored station selection
function.
CD Repeat
1
On/Standby
Preset EQ
Sleep
CD Repeat
S.Bass
Program
/Set
Open/
Close
Timer/
On/Off
Clock
Mute
Function
2
Tuner
3
Band
Disc Skip
+10
Downloaded From Disc-Player.com Samsung Manuals
CD
Disc Skip
+10
CD
Timer
Mono/ST.
Open/
Close
VOL. +
VOL.
5
5
4
CDCD
Tuning
Tuning
Mode
Mode
VOL. –
VOL.
CD
CD
Listening to Two Cassettes in
Sequence
Listening to a Cassette
GB
When you press one of the tape deck’s buttons, except for
Stop/Eject button it remain in the down position. It returns to
its original position automatically when the function is completed or
you cancel the command.
Always treat your cassettes with care; refer, if necessary, to
the section entitled “Precautions When Using Audio
Cassettes” on page 21.
1
2
3
Switch the system on by pressing the On/Standby button.
4
Insert the pre-recorded cassette with the open edge of the tape facing downward.
5
6
Close the deck by pushing on it until it clicks into place.
You can only listen to one cassette at a time but you can
switch automatically from one deck to the other to listen to
two cassettes, one after the other.
1
2
3
Press the TAPE button.
Repeat Steps 1 to 5 above, inserting a cassette in each deck.
Press the Play (
) button corresponding to Deck 2.
Press the Play ( ) and Pause ( ) at the same time for Deck 1.
Result: The cassette in Deck 2 is played until the end of the tape is
reached; the cassette in Deck 1 then starts playing automatically.
To open either Deck 1 or 2, press the corresponding Stop/Eject
(
) button.
D Synchro /
2
3
3
Press the Play ( ) button corresponding to the selected deck to
start listening to the cassette.
7
8
Adjust the volume by turning the Vol. knob.
9
To...
Press Stop/Eject (
Stop playing the cassette
Open the cassette door
Once
Twice
To stop playback temporarily, press Pause ( ).
Press Pause ( ) again to continue listening to the cassette.
1
Rewinding and Fast-Forwarding
a Cassette
)...
You can rewind or fast-forward a cassette.
Example: You wish to listen to a track again or fast-forward
the cassette to the end when you have finished
playing all the tracks on one side of the cassette.
R
Standby
Before fast-forwarding or rewinding the cassette, you must
stop the playback.
Band
TUNER
CD
TAPE
Program/Set
Disc 1
AI Off/Sleep
Timer On/Off
You can use this function while listening to a compact disc or
radio programme.
2
Mono/ST
Disc 2
AUX
Disc 3
Timer/Clock
CD Repeat
1
Disc Change
ck
Demo
Ro
Vol.
Phones
Down
Preset/Manual
Up
7
ic
Class
2
S.BASS
If necessary, press Stop/Eject (
the playback.
) for the appropriate deck to stop
To...
Press...
Fast-forward the cassette
Rewind the cassette
F/FWD ( )
REW ( )
The rewind or fast-forward functions stop automatically when
the beginning or end of the cassette is reached. The Rew ( )
or F/Fwd ( ) button then returns to its original position.
CD Synchro /
6
3,9
8
CD Synchro /
Downloaded From Disc-Player.com Samsung Manuals
2
2
1
Copying a Cassette (Dubbing)
Recording a Radio Programme
GB
You can record a radio programme of your choice.
You can only record on cassettes in Deck 1.
You can only record on normal bias cassettes.
You do not need to adjust the volume, as it has no effect on recording.
1
2
3
4
5
6
You can copy a cassette from Deck 2 to Deck 1. Two options
are available:
Normal speed dubbing
High-speed dubbing
Take care not to insert the tape to be copied in Deck 1, as it
will be erased when you start recording.
You do not need to adjust the volume, as it has no effect on
the recording.
Switch your system on by pressing On/Standby.
Insert a blank cassette in Deck 1.
Press the TUNER button to select the radio function.
Select the radio station that you wish to record.
Press the Record ( ) button corresponding to Deck 1.
Result: Recording starts.
Press Stop/Eject (
) when you are ready to stop recording.
You can press Pause ( ) during recording, if you wish to skip unwanted passages. Press Pause ( ) again when you want to start recording again.
1
R
Standby
5
6
D Synchro /
Demo
3
Mono/ST
1
2
3
4
5
6
7
8
Band
Switch your system on by pressing On/Standby.
Insert a blank cassette in Deck 1.
Insert the tape to be copied in Deck 2.
Press the TAPE button to select the cassette function.
Press Record (
Press Play (
) for Deck 1.
) for Deck 2.
To copy a cassette at high speed, press Hi Speed Dubbing.
Result: The cassette is copied and the H DUBB indicator flashes.
When you have finished recording, press the Stop/Eject (
tons for both Deck 1 and Deck 2.
) but-
TUNER
TUNER
Program/Set
Disc 1
It is an infringement of copyright laws to copy records and prerecorded cassettes CD or radio programmes or to re-record them in
any form without the permission of the owners of the corresponding
copyright.
Recording a Compact Disc
The sound quality of cassettes copied using high-speed dubbing
is lower than with normal dubbing.
It is recommended that you turn the volume down during
high-speed dubbing, due to the high-pitched sound.
You can record a compact disc on a cassette placed in Deck 1.
You can only record on normal bias cassettes.
You do not need to adjust the volume, as it has no effect on recording.
1
You can start recording with any track on the compact disc.
R
Standby
7
Switch your system on by pressing On/Standby.
Insert a blank cassette in Deck 1.
Demo
Band
TUNER
TAPE
CD
AUX
Program/Set
Disc 1
Select the required disc.
AI Off/Sleep
Press the CD button and select the required track on the compact disc.
Timer On/Off
Disc 3
TUNER
CD
TAPE
AUX
Open/Close
rogram/Set
imer On/Off
Disc 2
Disc 3
Pop
Disc 1
Press the Record ( ) button corresponding to Deck 1.
Result:Recording starts.
Disc 2
Timer/Clock
Timer/Clock
CD Repeat
Disc Change
Ro
Vol.
Press the Pause ( ) button corresponding to Deck 1 to stop recording temporarily.
Result:Recording stops but the compact disc continues playing.
ic
Class
Down
Preset/Manual
When you are ready to stop recording, press Stop/Eject (
cassette deck and Stop ( ) for the compact disc player.
Up
S.BASS
Press Pause ( ) a second time to start recording again.
8
4
Mono/ST
Press the CD button.
ck
1
2
3
4
5
6
) for the
If you cannot press the Record ( ) button, check that the cassette has
been inserted correctly and the safety tabs are intact.
1
R
Standby
Demo
Mono/ST
Synchro /
3,5
Band
TUNER
CD
CD
Downloaded From Disc-Player.com Samsung Manuals
Program/Set
Disc 1
Dis
6
8
7
5
Synchro /
8
6
7
Hi Speed
Dubbing
Cancelling the Timer
Timer Function
ERROR is displayed.
The timer enables you to switch the system on or off at specific times.
Example: You wish to wake up to music every morning.
After having set the timer, it will start automatically as
shown by the TIMER indication on the display. If you no
longer wish to use the timer, you must cancel it.
If you no longer want the system to be switched on or off
automatically, you must cancel the timer.
You can stop the timer at any time (system on or in standby mode).
Before setting the timer, check that the current time is correct.
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
1
2
3
4
To...
Press TIMER-ON/OFF...
Cancel the timer
Once.
Result:
is no longer displayed.
Restart the timer
Twice.
Result:
is displayed again.
Switch the system on by pressing On/Standby.
TIMER is displayed.
Press Timer/Clock until
Press Program/Set.
Result: ON TIME is displayed (instead of the equalizer symbols) for
a few seconds, followed by any switch-on time already set;
you can set the timer switch-on time.
On/Standby
6
7
a
Set the hour by pressing Tuning
b
Press Program/Set.
Result: The minutes flash.
c
Set the minutes by pressing Tuning
d
Press Program/Set.
Result: OFF TIME is displayed (instead of the equalizer symbols)
for a few seconds, followed by any switch-off time already
set; you can now set the timer switch-off time.
and
.
Preset EQ
and
.
Timer/
On/Off
Clock
S.Bass
Mute
Function
Program
/Set
Mono/ST.
Tuner
and
a
Set the hour by pressing Tuning
.
b
Press Program/Set.
Result: The minutes flash.
c
Set the minutes by pressing Tuning
d
Press Program/Set.
Result: VOL XX is displayed, where XX corresponds to the volume
already set.
and
Band
Setting the System to Switch off
Automatically
Set the timer switch-off time.
While listening to a compact disc or a cassette, you can
set the system to switch off automatically
Example: You wish to go to sleep to music.
.
Press Tuning
and
to adjust the volume level and press
Program/Set.
Result: The source to be selected is displayed.
Press Tuning
and
the system switches on.
to select the source to be played when
If you select...
You must also...
TUNER (radio)
a Select the FM or AM frequency band by
and
.
pressing Tuning
b Press Program/Set.
c Select a preset station by pressing
Tuning
and
.
CD (compact disc)
8
Timer
Set the timer switch-on time.
Sleep
5
GB
1
2
Press AI Off/Sleep one or more times to indicate how long the system should continue playing before it switches off:
90 MIN
At any time, you can:
Check the remaining time by pressing AI Off/Sleep
Change the remaining time by repeating Steps 1 and 2
3
a Load one or more compact discs.
Press On/Standby to set the system to standby mode.
Result: TIMER is displayed to the bottom left of the time, indicating
that the timer has been set. The system will switch on and off
automatically at the required times.
Press AI Off/Sleep.
Result: playback starts and the following indications are displayed:
4
Press AI Off/Sleep one or more times until AI SLEEP is displayed.
Result: The system will automatically switch off at the end of disc or
cassette.
To cancel SLEEP or AI OFF function, press AI Off/Sleep one or more
times until OFF is display.
If the timer switch on and off times are identical, the word
CD
Demo
Mono/ST
Band
On/Standby
1
Timer
Timer/
On/Off
Clock
2
VOL.
TUNER
4,5,6,7
Disc 1
AI Off/Sleep
CD
CD
Preset EQ
Sleep
S.Bass
Mute
Tuning
Mode
Function
3,4,5,6,7
Mono/ST. Tuner
Program
/Set
Downloaded From Disc-Player.com Samsung Manuals
CD
TAPE
AUX
Program/Set
Timer On/Off
Disc 2
Timer/Clock
CD Repeat
CD
Disc 3
Disc Change
Vol.
ic
Class
Phones
VOL.
4,5,6,7
Down
Preset/Manual
Up
S.BASS
Mute Function
Selecting an Equalizer Preset
GB
You can turn the sound off temporarily on your system.
Example: You wish to answer a telephone call.
1
2
Press Mute on the remote control.
Result: The equalizer symbols are no longer displayed, the speaker
symbols flash and the sound is switched off.
To switch the sound back on, press Mute again or the VOL. buttons.
On/Standby
Timer
Timer/
On/Off
Clock
Your mini-compact system is equipped with a preset equalizer
that allows you to choose the most appropriate balance
between treble and bass frequencies, according to the type of
music you are listening to.
Press Preset EQ on the remote control until the required option is
selected.
To obtain a...
Select...
Normal balance (linear)
Balance suitable for pop music
Balance suitable for rock music
Balance suitable for classic music
PASS
POP
ROCK
CLASSIC
On/Standby
Preset EQ
Sleep
CD Repeat
S.Bass
Mute
Function
Program
/Set
Mono/ST.
Tuner
Open/
Close
Preset EQ
Sleep
Band
Disc Skip
Timer
Timer/
On/Off
Clock
S.Bass
Mute
Function
Program
/Set
Mono/ST.
Tuner
+10
CD Repeat
CD
Open/
Close
Band
Disc Skip
+10
CD
Super Bass Sound
Power Sound Function
Your mini-compact system has a bass amplification function
called SBS (Super Bass Sound). This function makes the sound
more powerful and real.
This machine is equipped with the function of POWER SOUND,
which amplifies bass and improves high key or bass twice as
much for you to appreciate powerful real surround-sound.
1
Press the S. Bass button.
Result: SBS ON is displayed for a few seconds.
1
2
To cancel this function, press S. Bass again.
Press Power Sound button on the front panel.
Result: The Power Sound button on the front panel lights up green.
P-SOUND is displayed for a few seconds.
A more powerful resonant sound is diffused.
2
To cancel this function, press Power Sound again.
On/Standby
Preset EQ
S.Bass
Timer
Timer/
On/Off
Clock
Mute
Function
R
ndby
Sleep
CD Repeat
Program
/Set
Open/
Close
Mono/ST.
Tuner
Band
Disc Skip
+10
Mono/ST
Band
TUNER
CD
TAPE
AUX
Open/Close
Program/Set
p
Timer On/Off
Disc 3
Timer/Clock
CD Repeat
Disc Change
Vol.
Downloaded From Disc-Player.com Samsung Manuals
ck
CD
Disc 2
Pop
Disc 1
Ro
CD DIGITAL OUT Jack (option)
Microphone Function (option)
GB
This unit can output CD digital sound signals through this
jack. Use an optical cable to connect digital audio equipment.
(DAT deck, MD recorder, etc.).
Remove the dust cap (1) from the CD DIGITAL OUT jack. Then,
connect an optical cable plug to the CD DIGITAL OUT jack.
The microphone enables the user to mix in his or her
vocals to sing-along with the music.
Preparation
Plug the microphone with a 6.3mm phone jack into microphone terminal.
Turn the MIC MIXING switch to adjust the mic volume.
Demo
Mono/ST
Band
TUNER
CD
TAPE
AUX
Program/Set
Disc 1
AI Off/Sleep
Timer On/Off
Disc 2
Timer/Clock
CD Repeat
(1)
Mic
ic
Class
Mic Volume
MIN
Downloaded From Disc-Player.com Samsung Manuals
Disc Change
Vol.
Phones
Down
When the CD DIGITAL OUT jack is not being used
Attach the supplied dust cap.
Disc 3
MAX
Preset/Manual
Up
S.BASS
Connecting to an External Source
Safety Precautions
GB
The auxiliary input can be used to take advantage of the sound quality
of your mini-compact system when listening to other sources.
Examples: A television
A video disc player
A DAT or DCC cassette player
A Hi-Fi stereo video cassette recorder
The following diagrams illustrate the precautions to be taken
when using or moving your mini-compact system.
To connect the external source, the source must have an audio
output. In addition, you need an RCA connection cable.
R
Standby
R
Standby
Demo
Mono/ST
Band
TUNER
CD
TAPE
AUX
Open/Close
Program/Set
AI Off/Sleep
CD
TAPE
AUX
Disc 2
Timer On/Off
Timer On/Off
Disc 3
Timer/Clock
Open/Close
CD Repeat
Disc 3
Disc Change
Timer/Clock
Ro
Vol.
P op
Disc 1
P op
Band
TUNER
AI Off/Sleep
Disc 2
Disc 1
Mono/ST
Program/Set
ck
Demo
ic
Class
Phones
1
Disc Change
ic
Class
Set the system to standby mode and disconnect it and the external
source from the main.
Preset/Manual
Preset/Manual
Hi Speed
Dubbing
Up
Ro
Vol.
Down
Down
ck
CD Repeat
Phones
S.BASS
Hi Speed
Dubbing
Up
S.BASS
CD Synchro /
CD Synchro /
2
Connect the audio cable to the rear of the mini-compact system.
Connect the...
Red jack
White jack
To the connector marked...
R (right)
L (left)
Ambient operating conditions:
Ambient temperature
5°C-35°C
Humidity
10-75%
For optimum sound quality, do not invert the right and left channels.
3
Plug the system back into the main socket and press On/Standby to
switch it on.
4
Select the AUX source by pressing AUX on the front panel or
Function on the remote control one or more times.
Result: AUX is displayed.
5
6
Switch the external source on.
Do not expose the unit to direct sun
radiation or other heat sources.
This could lead to overheating and
malfunction of the unit.
R
Standby
R
Standby
Demo
Mono/ST
Band
Mono/ST
TUNER
Band
TAPE
Disc 2
AUX
Disc 1
Open/Close
Disc 3
AI Off/Sleep
Timer/Clock
Timer On/Off
TAPE
Disc 2
AUX
Open/Close
Disc 3
Timer/Clock
CD Repeat
Disc Change
Ro
Vol.
ic
Class
Phones
Preset/Manual
Ro
Vol.
Disc Change
ck
CD Repeat
Down
CD
Program/Set
CD
P op
Disc 1
P op
TUNER
Program/Set
Timer On/Off
ck
Demo
AI Off/Sleep
ic
Class
Phones
Hi Speed
Dubbing
Down
Preset/Manual
Hi Speed
Dubbing
Up
Up
S.BASS
S.BASS
Adjust the volume and balance as required:
Volume
Equalizer
CD Synchro /
CD Synchro /
Example: You can watch a film and take advantage of stereo sound
provided that the original sound track is in stereo, (as if you
were in a cinema).
Do not place potted plants or vases
on top of the unit. Moisture entering
the unit could lead to dangerous
electric shock and can cause
equipment damage. In such events
immediately disconnect the main
plug from the socket.
During thunderstorms, disconnect
the main plug from the socket.
Main voltage peaks due to lightning could damage the unit.
R
Standby
VOLUME
UP
DOWN
Demo
Mono/ST
Band
TUNER
CD
TAPE
AUX
Program/Set
Disc 1
Disc 2
Disc 3
Connecting Headphones
You can connect a set of headphones to your mini-compact
system so that you can listen to music or radio programmes
without disturbing other people in the room. The earphones
must have a 6.3 mm jack or an appropriate adapter.
Remove the batteries from the
remote control, if not used for any
extended periods.
Leaking batteries can cause serious
damage to the remote control.
When using headphones, take care
not to listen at excessive volumes.
Extended use of headphones at
high volumes will lead to hearing
damage.
Connect the headphones to the Phones
jack on the front panel.
Result: The loudspeakers are no longer used to output the sound.
R
Standby
Demo
Mono/ST
Band
Prolonged use of headphones at a high volume may damage
your hearing.
Disc 1
AI Off/Sleep
Timer On/Off
Disc 2
TUNER
CD
TAPE
AUX
Open/Close
Program/Set
Disc 2
Disc 3
Timer/Clock
CD Repeat
Disc Change
ck
Timer On/Off
P op
Disc 1
AI Off/Sleep
Ro
Vol.
ic
Class
Phones
Down
Preset/Manual
Hi Speed
Dubbing
Up
S.BASS
Disc 3
CD Synchro /
Timer/Clock
CD Repeat
Disc Change
Vol.
ic
Class
Phones
Down
Preset/Manual
Up
S.BASS
Downloaded From Disc-Player.com Samsung Manuals
Do not place heavy items on the
main lead. Main cable damage can
lead to damage of the equipment
(fire hazard) and can cause electric
shock.
Do not remove any equipment panels.
The inside of the unit
contains live components, which
cause electric shock.
Cleaning Your Mini-Compact
System
Precautions When Using Audio
Cassettes
GB
Check that the tape in the cassette is sufficiently taught.
To prevent erasing a cassette that you wish to keep, remove the safety
tab on the upper edge of the cassette. To record a cassette, where the
tab has been broken, simply cover the opening with adhesive tape.
When you have finished playing a cassette, always put it back in its case.
Store your cassettes in a clean place, out of direct sunlight, where they
will not be exposed to high temperatures.
Avoid using 120-minute cassettes as they place unnecessary strain on
the tape mechanism.
To obtain the best possible results from your mini-compact system,
you must clean the following elements regularly:
The outer casing
The compact disc player
The cassette players (heads, rollers and drive capstans)
Always unplug the system from the wall outlet:
Before cleaning it
If you are not going to be using it for a long time
Outer Casing
Clean the outer casing regularly using a soft cloth and a light detergent. Do not use
abrasive powders, liquids or aerosol cleaners. Never let any liquids get into the system.
Before Contacting the After-Sales
Service
Compact Disc Player
Before playing a compact disc, clean it with a special CD cleaning
agent. Do not use the same cleaning agents as for vinyl LP records.
Carefully wipe the disc from the centre outward.
1
2
Regularly clean the player with a special cleaning disc (available from
your local dealer).
Tape Decks
Press Stop/Eject(
1
2
It always takes a little time to become familiar with a new appliance. If you have
any of the problems listed below, try the solutions given. They may save you the
time and inconvenience of an unnecessary service call.
) to open the cassette deck.
Use a cotton bud and a special cassette cleaning agent to clean the:
Head (1)
Rollers (2)
Drive capstans (3)
If you will not be using the remote control for a long time,
remove the batteries to prevent corrosion.
Although your system is very hard-wearing, it should not be
used in an excessively dusty environment or subjected to
shocks or extreme heat (close to heating appliances or in
direct sunlight, etc.).
If the unit emits an unpleasant odor when in use, unplug it
from the main supply and contact the after-sales service.
3
Problem
The system does not work
G
E
N
E
R
A
L
2
Precautions When Using Compact
Discs
Handle your compact discs with care. Always hold them by the edges
to avoid leaving fingerprints on the shiny surface.
When you have finished playing a compact disc, always put it back in its case.
Do not fix paper or adhesive tape to the discs and do not write on the label.
Clean them with a special-purpose cloth.
Store your compact discs in a clean place, out of direct sunlight,
where they will not be exposed to high temperatures.
Always use compact discs marked.
COMPACT
DIGITAL AUDIO
Downloaded From Disc-Player.com Samsung Manuals
• The main lead is not correctly plugged into a
wall socket or the wall socket is not switched on.
• The remote control batteries need replacing or
the polarity has not been respected.
• The On/Standby button has not been
pressed.
There is no sound
• The volume has been completely turned down.
• The correct function (TUNER, TAPE, CD,
AUX) has not been selected.
• You have connected a set of earphones.
• The loudspeaker wires have been disconnected.
• The Mute button has been pressed.
The Timer does not work
• The timer has been stopped by pressing Timer
On/Off.
The compact disc player does not
start playing
C
D
1
Checks/Explanation
C
A
S
S
E
T
T
E
S
R
A
D
I
O
• The CD function has not been selected.
• The disc has been inserted face down or is
either dirty or scratched.
• The laser sensor is dirty or dusty.
• The system has not been installed on a flat,
horizontal surface.
• Condensation has formed in the player; leave
the system in a warm, airy room for at least
one hour.
The tape does not start playing
• The TAPE function has not been selected.
• The cassette has not been inserted correctly.
• The cassette player has not been closed.
• The tape is either slack or broken.
The volume falls off
The cassette is not erased correctly
There is excessive wow and flutter
Reception is poor or no radio stations are received at all
• The audio heads are dirty.
• The rollers or drive capstans are dirty.
• The tape is worn.
• The TUNER function has not been selected.
• The radio frequency has not been correctly
selected.
• The aerial has been disconnected or is not facing the right way. Turn it until you find the best
orientation.
• You are in a building that blocks radio waves;
you must use an outside aerial.
If the above guidelines do not allow you to solve the problem, take a note of:
The model and serial numbers, normally printed on the rear of the system
Your warranty details
A clear description of the problem
Then contact your local dealer or SAMSUNG after-sales service.
Technical Specifications
GB
SAMSUNG strives to improve its products at all times. Both the design specifications and
these user instructions are thus subject to change without notice.
RADIO
LW (OPTION)
Usable sensitivity
1000 µV
SW (OPTION)
Usable sensitivity
80 µV
MW (AM)
Signal/noise ratio
40 dB
Usable sensitivity
500 µV
Total harmonic distortion
2%
FM
Signal/noise ratio
60 dB
Usable sensitivity
3 µV
Total harmonic distortion
0.5 %
COMPACT DISC PLAYER
Capacity
3 discs
Frequency range
20 Hz - 20 KHz (± 1 dB)
Signal/noise ratio
90 dB (at 1 KHz) with filter
Distortion
0.05 % (at 1 KHz)
Channel separation
80 dB
Disc sizes
Diameter: 120 or 80 mm. Thickness: 1.2 mm
TAPE DECK
Frequency range
125 Hz ~ 8 KHz
Signal/noise ratio
40 dB
Channel separation
33 dB
Erasing effect
60 dB
AMPLIFIER
Output power (4 Ω)
Output power (6 Ω)
2 x 15 Watts RMS (total harmonic distortion: 10 %) ................. Only MAX-N22
2 x 40 Watts RMS (total harmonic distortion: 10 %) ................. Only MAX-N25
Channel separation
50 dB
Signal/noise ratio
75 dB
GENERAL
Dimensions
Downloaded From Disc-Player.com Samsung Manuals
270 (W) x 317 (H) x 365 (D) mm
THIS APPLIANCE IS MANUFACTURED BY:
ELECTRONICS
Downloaded From Disc-Player.com Samsung Manuals
AH68-00352B