advertisement
TV / DVD COMBO
OWNER’S MANUAL
Model:
•DDT-14H9 S
Downloaded From Disc-Player.com Daewoo Manuals
Downloaded from www.Manualslib.com
manuals search engine
HELP LINE NUMBER;
011 89 2525 77
IMPORTANT SAFEGUARDS
IMPORTANT SAFEGUARDS
1 Read Instructions - All the safety and operating instructions should be read before the appliance is operated.
2 Retain Instructions - The safety and operating instructions should be retained for future reference.
3 Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to.
4 Follow Instructions - All operating and use instructions should be followed.
5 Cleaning - Unplug TV/DVD from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
6 Attachments - Do not use attachments not recommended by the TV/DVD manufacturer as they may cause hazards.
7 Water and Moisture - The apparatus shall not be exposed to dripping or splashing water and that no object filled with liquids, such as vases, shall be placed on the apparatus.
8 Accessories - Do not place this TV/DVD on an unstable cabinet, stand, bracket, or table. The TV/DVD may fall, causing serious injury to someone, and serious damage to the appliance. Use only with a cabinet, stand, bracket,
PORTABLE CABINET WARNING or table recommended by the manufacturer, or sold with the TV/DVD. Any mounting of the appliance should follow the manufacturer’s instructions and use a mounting accessory recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cabinet combination to overturn.
9 Ventilation - Slots and openings in the cabinet and the back or bottom are provided for ventilation and to ensure reliable operation of the TV/DVD and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the TV/DVD on a bed, sofa, rug, or other similar surface. This TV/DVD should never be placed near or over a radiator or heat register. This
TV/DVD should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to. Around the unit, the space should be more than 10cm.
10 Power Sources - This TV/DVD should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company.
11 Grounding or Polarization - This TV/DVD is equipped with a polarized alternating - current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
12 Power-Cord Protection - Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, and the point where they exit from the appliance.
13 Lightning - For added protection for this TV/DVD receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the TV/DVD due to lightning and power-line surges.
14 Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
1
Downloaded From Disc-Player.com Daewoo Manuals
Downloaded from www.Manualslib.com
manuals search engine
15 Overloading - Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.
16 Object and Liquid Entry - Never push objects of any kind into this TV/DVD through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the TV/DVD.
17 Servicing - Do not attempt to service this TV/DVD yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
18 Damage Requiring Service - Unplug this TV/DVD from the wall outlet and refer servicing to qualified service personnel under the following conditions:
A. When the power-supply cord or plug is damaged or frayed.
B. If liquid has been spilled, or objects have fallen into the TV/DVD.
C. If the TV/DVD has been exposed to rain or water.
D. If the TV/DVD does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the TV/DVD to its normal operation.
E. If the TV/DVD has been dropped or damaged in any way.
F. When the TV/DVD exhibits a distinct change in performance - this indicates a need for service.
19 Replacement Parts - When replacement parts are required, be sure the service technician has used replacements parts specified by the manufacturer that have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock, injury to persons or other hazards.
20 Safety Check - Upon completion of any service or repairs to this TV/DVD, ask the service technician to perform routine safety checks to determine that the TV/DVD is in proper operating condition.
21 Heat - This TV/DVD product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.
22 Electrostatic - In DVD mode, your DVD Disc may be playback from the first parts because of the electrostatic symptom.
23 Secondary Switch - When switching off, the apparatus is not completely switched off from the mains. To disconnect it from the mains, you have to unplug mains.
2
Downloaded From Disc-Player.com Daewoo Manuals
Downloaded from www.Manualslib.com
manuals search engine
Table of Contents
Before use ....
IMPORTANT SAFEGUARDS
Table of Contents
Identification of Controls
Remote Control
Installation ....
Basic Installation
Connecting to Various Equipment
Basic TV operation ....
Watching TV
TELETEXT
Setting TV
To Display the Setting Screen
Setting Picture
Setting Sound
Installing Channels
Setting Other Features
17
18
19
22
14
15
16
16
9
10
1
3
4
6
DVD Operation ....
Playing the DVD video disc
Basic Playback
Special Playback
Using DISPLAY Button
Playing the Desired Scene or
Track during Playback 28
Directly Moving to the Desired Title 28
23
23
24
26
Playing the Disc, Chapter,
Title, and Track Repeatedly
Repeating the Given Sections
29
29
Random Play
Program Play
30
31
Searching by Memorizing the Favorite
Scene 32
Displaying menus in disc
Storing Viewed DVD settings
Changing Subtitle Language
Changing audio language
Using zoom feature
Viewing from Another Angle or Producing a
3D SURROUND Effect
Playing an MP3 Disc
Initial Settings
33
34
35
36
37
38
39
42
Others
About DVD
Before Calling Service Personnel
51
53
IMPORTANT COPYRIGHT INFORMATION
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited.
3
Downloaded From Disc-Player.com Daewoo Manuals
Downloaded from www.Manualslib.com
manuals search engine
Identification of Controls
Main Body (Front Part)
Speaker Left Disc Loading Tray Speaker Right
POWER button (Power of TV/DVD is fully intercepted.)
OPEN/CLOSE button (For opening disc tray)
SKIP BACK button
PLAY button
SKIP FORWARD button
STOP button
OPERATING STATUS indicator (This button is lit when playing a DVD)
REMOTE SENSOR
STAND-BY indicator
TV/AV/DVD MODE CONVERT button
TV VOLUME button
TV CHANNEL button
4
Downloaded From Disc-Player.com Daewoo Manuals
Downloaded from www.Manualslib.com
manuals search engine
Main Body (Rear and Side Part)
Identification of Controls
AUDIO OUT jack (Left/Right)
COAXIAL DIGITAL
AUDIO OUT jack
SCART jack
POWER CORD
CONNECTION to
ANTENNA
CABLE
VIDEO IN jack
AUDIO IN jack
CONNECTION to EARPHONE jack
Downloaded From Disc-Player.com Daewoo Manuals
Downloaded from www.Manualslib.com
manuals search engine
5
6
Remote Control
Remote Control Buttons
POWER button
If you press the ON/OFF button in the front part of this product, power is on.
DISPLAY button
Operating status and GUI(Graphic User Interface) menu are displayed in a screen.
TV/AV, DVD button
You can select input mode.
NORMAL button
NORMAL I/ NORMAL II/ FAVOURITE picture control
NUMBER button
You can enter the relevant number directly or select a desired channel.
PAUSE/STEP button
Pause screen and step screen are displayed whilst playing and pausing respectively.
SLEEP button
You can set automatic POWER OFF.
F.R/STEP or F.F/STEP button
You can search screen whilst playing back or forward.
STOP button
SKIP BACK/SKIP FORWARD button
You can skip a screen whilst playing back or forward.
PLAY button
TV MENU button
The Menu screen relating to TV is displayed.
VOLUME button
CURSOR( ), CHANNEL SELECT button
This button functions as cursor or channel select button in setting
TV/DVD and operating TV respectively.
MUTE button
Press this button if you only want to turn off the sound.
OK/ENTER button
Press this button if TV or DVD setting is completed.
Downloaded From Disc-Player.com Daewoo Manuals
Downloaded from www.Manualslib.com
manuals search engine
Downloaded From Disc-Player.com Daewoo Manuals
Downloaded from www.Manualslib.com
manuals search engine
Remote Control
MENU/PBC button
The DVD menu screen is displayed.
AUDIO button
You can select the desired audio language.
SUBTITLE button
You can select the desired subtitle language.
DISC TRAY EJECT button
SETUP button
You can set the DVD player.
REPEAT button
You move into REPEAT mode whenever you press this button.
A-B REPEAT button
You can play the given sections repeatedly.
TITLE button
You can select the desired title.
Angle button
You can select the desired screen angle.
ZOOM button
You can zoom in a screen.
PROGRAM button
You can program the desired playing order.
RANDOM button
You can play the DVD randomly.
CLEAR button
You can clear settings.
MARKER button
You can mark the desired scene.
MARKER SEARCH button
You can reach the marked scene.
This button functions as a Marker Search button in DVD.
SOUND MODE button
You can select the desired audio mode when watching TV.
ASPECT button
You can modify TV Aspect in TV/AV1/AV2/DVD Mode.
7
Inserting the Batteries
1 2 3
Remote Control
Please respect the environment and prevailing regulations. Before you dispose of batteries, ask your dealer whether they are subject to special recycling and if he accepts to take them back.
AERIAL SOCKET : (75Ohms-VHF/UHF/cable)
The aerial socket, located at the back of the TV/DVD set, enables the connection of an external aerial or one from another item of equipment fitted with a modulator (video recorder, satellite receiver, etc.).
(NB: A modulator converts basic video and sound signals to radio frequencies, ‘R.F.’.)
MAINS PLUG:
The mains plug carries the power supply to your TV/DVD set. It should only be connected to an AC supply of
220-240V ~ 50Hz.
It must not be connected to a DC supply. If the plug is detached from the cable, do not under any circumstances connect it to a mains socket as there is a danger of electrocution.
UK SOCKET
Equipment for the UK is supplied with a mains cable fitted with a moulded plug.
The plug contains safety components and must not be replaced by a type sold in shops.
It is fitted with a fuse that protects your TV/DVD. If your set no longer works, the fuse may have blown. If it has, replace it with an identical ASTA certified or BSI (BS 1362) 5 amp fuse.
8
Downloaded From Disc-Player.com Daewoo Manuals
Downloaded from www.Manualslib.com
manuals search engine
Basic Installation
Connecting the Antenna Cable
Outdoor antenna or wall antenna outlet
If TV picture is not clear, it usually result from the wrong antenna connection.
Please install the antenna in the proper place and in the right direction.
Connecting a SCART SOCKET
This connection is used to connect this player to an external device (VCR, CAMCORDER, DVD) and to be displayed in TV/DVD. If the peripheral is powered on in TV mode, some peripherals are converted into
AV1 mode automatically and displayed. Otherwise, you should press the TV/AV/DVD button to convert into
AV1 mode. Pin specification of SCART SOCKET is as follows.
8
9
6
7
10
11
12
13
PIN
1
2
3
4
5
14
15
16
17
18
19
20
21
Signal Designation
Audio Out (linked with 3)
Audio In (linked with 6)
Audio Out (linked with 1)
Audio Earth
Blue Earth
Audio In (linked with 2)
Blue In
Slow (Function) Switching
Green Earth
NC
Green In
NC
Red Earth
NC
Red In
Rapid Blanking, Switching
Video Earth
Rapid Blanking Earth
Video Out
Video In
Common Earth
Matching Values
0.5Vrms, Imp < 1k Ω (RF 60% MOD)
0.5Vrms, Imp > 10k Ω
0.5Vrms, Imp < 1k Ω (RF 60% MOD)
0.5Vrms, Imp > 10k Ω
0.7Vp-p±10%, Imp 75 Ω
TV:0~2V, Peri:9.5~12V, Imp>10k Ω
0.7Vp-p±10%, Imp 75 Ω
0.7Vp-p±10%, Imp 75
0.7Vp-p±10%, Imp 75
Logic 0: 0~0.4V, Logic 1: 1~3V, Imp 75 Ω
1.0 Vp-p±10%, Imp 75 Ω
1.0 Vp-p±10%, Imp 75 Ω
9
Downloaded From Disc-Player.com Daewoo Manuals
Downloaded from www.Manualslib.com
manuals search engine
Connecting to Various Equipment
Connecting to Audio System
You can enjoy the stereo sound.
N O T E
• Refer to the owner’s manual of your audio system to connect.
• Before you connect the TV/DVD to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections.
• If you place the TV/DVD near a tuner or radio, the radio broadcast sound might be distorted. In this case, move the TV/DVD away from the tuner and radio.
• The output sound of TV/DVD has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.
• Turn off the audio system before you connect or disconnect the TV/DVD’s power cord. If you leave the audio system power on, the speakers may be damaged.
Warning!!
Do not select “Dolby Digital” as Digital Audio Output of this TV/DVD unless you connect the DIGITAL OUT jack of this TV/DVD to an AV decoder that has the Dolby
Digital decoding equipment.
High volume sound may damage your hearing as well as the speakers.
(Refer to “Selecting Digital Audio Output” on page 49)
10
Downloaded From Disc-Player.com Daewoo Manuals
Downloaded from www.Manualslib.com
manuals search engine
Connecting to Various Equipment
Connecting to a Camcorder or Other Video Player
Connection with SCART Jack (AV1)
Connect the SCART jack of your video player (or camcorder) to SCART terminal of TV/DVD with SCART jack.
Connection with A/V Jack (AV2)
Connect the AUDIO/VIDEO OUT terminal of your video player (or camcorder) to AUDIO/VIDEO IN terminal of TV/DVD with Video/Audio Connecting Cable.
11
Downloaded From Disc-Player.com Daewoo Manuals
Downloaded from www.Manualslib.com
manuals search engine
Connecting to Various Equipment
Connecting to Dolby Digital Amp
You can enjoy the high quality dynamic sound of Dolby Digital, Dolby Pro Logic, and 2 Channel Digital
Stereo.
Dolby Digital ?
Dolby Digital is the surround sound technology recently used in theatres, and is now available to reproduce this realistic effect at home. You can enjoy motion picture and live concert DVD video discs with this dynamic realistic sound by connecting the TV/DVD to the 6 channel amp equipped with a
Dolby Digital decoder or Dolby Digital processor.
Amp equipped with Dolby Digital decoder
1 To enjoy Dolby Digital sound from this TV/DVD, you need the following:
• DVD recorded in Dolby Digital
• 6 channel amp equipped with a Dolby Digital decoder or Dolby Digital processor and power amp
• 5 speakers and 1 subwoofer
2 To enjoy Dolby Digital sound
You need to select “Dolby Digital” in the SETUP menu.
12
Downloaded From Disc-Player.com Daewoo Manuals
Downloaded from www.Manualslib.com
manuals search engine
Connecting to Various Equipment
N O T E
• Refer to the owner’s manual of your audio system to connect.
• Before you connect the TV/DVD to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections.
• The output sound of TV/DVD has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.
• Turn off the audio system before you connect or disconnect the TV/DVD’s power cord. If you leave the audio system power on, the speakers may be damaged.
This product has been manufactured under technical tie-up with Dolby Laboratories.
“Dolby” and the “double-D ” symbol are registered trademarks of Dolby Laboratories.
Copyright 1992-1997 Dolby Laboratories, Inc. All rights reserved.
Downloaded From Disc-Player.com Daewoo Manuals
Downloaded from www.Manualslib.com
manuals search engine
13
Watching TV
1
2
To turn on the TV, press the [ON/OFF] button in the front part of the set. Now TV set is in STANDBY status.
Then, press the power button on the remote control.
Selecting the Channel.
Press the PR [ , ] button or [Number] button to select the desired channel. If input status is set to AV or DVD, press the [TV/AV/DVD] button to select TV.
3 Adjusting the Volume.
Press the [ VOL] button to decrease the volume level or [VOL ] button to increase the volume level.
4 To turn off the TV, press the [ ] button on the remote control.
Pressing the ON/OFF button of the set will clear the clock memory. If power switch of remote control is off, standby LED becomes RED.
14
Downloaded From Disc-Player.com Daewoo Manuals
Downloaded from www.Manualslib.com
manuals search engine
TELETEXT
SWITCHING TELETEXT ON/OFF
Press the TELETEXT button ( ). The index page viewed last will appear. Press the TELETEXT button to return to the
TV mode.
COLOUR BUTTONS IN TELETEXT
A red, green, yellow and cyan field is shown at the bottom of the screen.If FASTEXT is transmitted by the station, by pressing the corresponding colour button on the remote controller you can easily select the desired page .
SELECTING PAGES
The NUMBER buttons 0...9 are used to enter a page number. The selected page number appears at the top of the screen and the page appears after a short time. The UP/DOWN buttons increase or decrease the current page number by 1.
INDEX PAGE
You can switch directly to the overview page of the station you are currently viewing by pressing the INDEX button ( ).
PAGE HOLD
Several sub pages can be combined under a page number and are scrolled at an interval determined by the TV station. The presence of sub pages is indicated by, for example, 3/6 beneath the time, which means that you are looking at the 3rd page of a total of 6 pages.
If you want to look at a subpage for a longer period of time, press the HOLD button ( ). The contents of the subpage shown are kept on the screen and no longer updated or switched to other subpages. Pressing the HOLD button again, the current subpage appears.
CALLING UP SUBPAGE DIRECTLY
Pressing the SUBPAGE button ( ) “Page no/...” appears at the bottom of the screen. Enter the subpage number that you want to call up with the NUMBER button 0...9, for example, the 2nd page. sequence 0002. The desired subpage is sought and displayed after a while. To exit, press SUBPAGE button ( ) again.
WATCHING TELEVISION DURING TELETEXT MODE
Some pages are continually updated, for example, stock market reports, sports announcement, and the latest news. If you want to watch TV and stay informed at the same time, press CANCEL button ( ).
The regular programme is still visible and the teletext symbol ( ) appears at the top of the screen. Pressing the CANCEL button again, the teletext page appears with the updated information.
REVEAL ANSWER
This function can be used on certain pages to reveal the solution of riddles. Press the REVEAL button ( ) to reveal a hidden answer and press again to hide it.
TV/TELETEXT ( )
Watch the TV programme and the Teletext pages simultaneously. The next press returns to the normal display.
BRIGHTNESS CONTROL IN TELETEXT MODE
Press the MENU button in teletext mode, the brightness control menu will be displayed in the bottom of the screen. You can adjust brightness using the corresponding colour button on the remote controller.
DOUBLING CHARACTER SIZE
Repeatedly pressing the SIZE button ( ) doubles the character size in the following order.
Upper half of the page Lower half of the page Return to normal size.
15
Downloaded From Disc-Player.com Daewoo Manuals
Downloaded from www.Manualslib.com
manuals search engine
Setting TV
To Display the Setting Screen
1 Press the [TV MENU] button in TV mode.
TV setting menu is displayed.
PICTURE
SOUND
INSTALL
FEATURES
MENU
Position
Exit
OK Access
2 Press the [ , ] button to select the desired item.
Current settings and variable settings for the desired item are displayed in the screen.
• PICTURE
• SOUND
• INSTALL
• FEATURES
3 Press the [OK] button and press the [ , ] button to set the desired item, then press the [OK/ENTER] button.
Additional steps may be required as items.
4 Press the [TV MENU] button to exit the current setting menu.
16
Downloaded From Disc-Player.com Daewoo Manuals
Downloaded from www.Manualslib.com
manuals search engine
Setting TV
Setting Picture
1 Press the [ , ] button in TV setting screen to select “PICTURE” and press the [OK] button.
Setting menu is displayed.
BRIGHTNESS
CONTRAST
COLOUR
SHARPNESS
PICTURE
MENU
Position
Exit
Adjust
2 Press the [ , ] button to select the desired item, then press the [ , ] button to set the desired item.
Current settings and variable settings for the desired item are displayed in the screen.
• BRIGHTNESS: Adjust the picture until correct brightness is obtained.
• CONTRAST: Adjust brightness and darkness among objects and background in the screen.
• COLOUR: Adjust colour to display natural human’s face colours.
• SHARPNESS: Adjust outlines of objects on screen to be smooth and clear.
• TINT: TINT adjustment is displayed if you receive NTSC through DVD play or
AV input.
3 Press the [TV MENU] button after setting is completed.
17
Downloaded From Disc-Player.com Daewoo Manuals
Downloaded from www.Manualslib.com
manuals search engine
Setting TV
Setting Sound
1 Press the [ , ] button in TV setting screen to select “SOUND”, then press the [OK] button.
Setting menu is displayed.
SOUND
VOLUME
BALANCE
PRESET
120 Hz
500 Hz
1.5 kHz
5.0 kHz
10 kHz
NORMAL
MENU
Position
Exit
Adjust
2 Press the [ , ] button to select the desired item, then press the [ , ] button to set the desired item.
Current settings and variable settings for the desired item are displayed on the screen.
• VOLUME
• BALANCE
• PRESET: You can select an item from either NORMAL, FAVOURITE1,
FAVOURITE2, MUSIC, and SPEECH.
3 Press the [TV MENU] button after setting is completed.
18
Downloaded From Disc-Player.com Daewoo Manuals
Downloaded from www.Manualslib.com
manuals search engine
Setting TV
Installing Channels
Setting on TV first after Shipment:
If you are setting your TV set for the first time, features OSD screen is displayed. In this screen, select the desired language and press the [OK/ENTER] button, then Install screen is displayed. Now select your country and run Search function.
1 Press the [ , ] button in TV setting screen to select “INSTALL”, then press the [OK] button.
Setting menu is displayed.
ATSS
EDIT
SYSTEM
CHANNEL
FREQUENCY
NAME
PROGRAM
STORE TO
INSTALL
GB
EURO
C 05
175.25
- - - -
03
03
MENU
Position
Exit OK
Adjust
Access
2 Running an ATSS(Automatic Tuning and Sorting System).
If you select a country with [ , ] button while the cursor points to ATSS and press the [OK] button over 3 seconds, channel is automatically tuned.
In running the ATSS, “PLEASE WAIT!!” is displayed.
When the ATSS is completed, the mode is converted into EDIT mode.
3 EDITING
The EDIT menu shows you the programme position assignment. You can change this programme position assignment according to your personal preferences.
Press the [ , ] button in INSTALL screen to select “EDIT”, then press the [OK] button.
EDIT screen is displayed.
EDIT
PR
05
04
NAME CH SKIP
ARD-C 12
ZDF-C 24
03
02
01
00
- - - S 07
WDR3- C 36
RTL2C 39
PR07C 45
99 - - - S 05
Position
MENU Exit
Delete
Move
Skip
Delete
Select the PR to delete with the [ , ] button and press the red button on the remote control.
Move
Select the PR to move with the [ , ] button and press the green button on the remote control. Again, press the [ , ] button to select the location to move it to. If you press the button, PR is increased and the desired channel replaces the previous PR channel. Press the green button on the remote control again, channel movement is completed.
SKIP
Select the PR to skip with the [ , ] button, and press the yellow button on the remote control. SKIP column is checked. Press the PR [ , ] button, channel is skipped.
19
Downloaded From Disc-Player.com Daewoo Manuals
Downloaded from www.Manualslib.com
manuals search engine
Setting TV
20
Downloaded From Disc-Player.com Daewoo Manuals
Downloaded from www.Manualslib.com
manuals search engine
4 Setting SYSTEM
Press the [ , ] button in the INSTALL screen to select “SYSTEM” if the automatic tuning did not already select this correct system.
Select a TV broadcasting type among EURO, E/EURO, FRANCE, and GB with
[ , ] button while the cursor points to SYSTEM.
5 Setting CHANNEL
Press the [ , ] button in the INSTALL screen to select “CHANNEL”.
Select a channel with the [ , ] button or
[NUMBER] button while the cursor points to
CHANNEL. Press the [OK] button to select either Cable or Air.
6 Setting FREQUENCY
Press the [ , ] button in the INSTALL screen to select “FREQUENCY”.
While the cursor points to FREQUENCY, you can start Manual Tuning by pressing the [
, ] button over 2 seconds. Also, you can start
Fine Tuning step by step when you press the button quickly.
To save adjusted values, you should save
PROGRAM with STORE TO after adjusting.
7 Setting NAME
* STATION NAME is mapped as broadcasting
ID. If there is no broadcasting ID, STATION
NAME is displayed as “- - - - ”.
Press the [ , ] button in the INSTALL screen to select “NAME”.
Enter the Modify mode by pressing the [ , ] button while the cursor points to NAME.
Press the [ , ] button, characters are displayed in order.
You can set a NAME consisting of 5 characters.
Press the [OK] button to save the settings.
ATSS
EDIT
SYSTEM
CHANNEL
FREQUENCY
NAME
PROGRAM
STORE TO
INSTALL
GB
EURO
C 05
175.25
- - - -
03
03
MENU
Position
Exit
0...9
OK
Adjust
Adjust
Cable/Air
ATSS
EDIT
SYSTEM
CHANNEL
FREQUENCY
NAME
PROGRAM
STORE TO
INSTALL
GB
EURO
C 05
175.25
- - - -
03
03
Position
0...9
Fine Tune
Adjust
MENU Exit
ATSS
EDIT
SYSTEM
CHANNEL
FREQUENCY
NAME
PROGRAM
STORE TO
INSTALL
Adjust
MENU Exit
Access
OK Store
Setting TV
8 Setting PROGRAM
Press the [ , ] button in the INSTALL screen to select “PROGRAM”.
Press the [ , ] button to set the desired PR while the cursor points to PROGRAM.
Whilst doing this channel as well as STORE TO are also changing.
9 Setting STORE TO
* This function is used to save PROGRAM
Press the [ , ] button in the INSTALL screen to select “STORE TO”.
Press the [OK] button to store settings while the cursor points to STORE TO.
ATSS
EDIT
SYSTEM
CHANNEL
FREQUENCY
NAME
PROGRAM
STORE TO
INSTALL
GB
EURO
C 05
175.25
- - - -
03
03
Position
MENU Exit
Adjust
0...9
Adjust
ATSS
EDIT
SYSTEM
CHANNEL
FREQUENCY
NAME
PROGRAM
STORE TO
INSTALL
GB
EURO
C 05
175.25
- - - -
03
03
Position
MENU Exit
0...9
OK
Adjust
Adjust
Store
Downloaded From Disc-Player.com Daewoo Manuals
Downloaded from www.Manualslib.com
manuals search engine
21
Setting TV
Setting Other Features
1 Press the [ , ] button in the TV setting screen to select “FEATURES” and press the [OK] button.
Setting menu is displayed.
LANGUAGE
CHILD LOCK
CLOCK
WAKE TIME
WAKE PR
NR
FEATURES
GB
ON
- - : - -
11:43
09
OFF
MENU
Position
Exit
Adjust
2 Press the [ , ] button to select the desired item and press the [ , ] button to set the item.
Current settings and variable settings for the desired item are displayed in the screen.
• LANGUAGE
• CHILD LOCK: Buttons in Setting menu are not operated (except ON/OFF
SW). Only remote controller operates and standby LED blinks.
• CLOCK
• WAKE TIME: TV is turned on automatically at the desired time.
• WAKE PR: Desired channel is turned on automatically at the desired time.
• NR(Noise Reduction)
3 Press the [TV MENU] button after setting is completed.
AUTO CLOCK SET
Normally the clock will set itself automatically if this channel set to PR01 has teletext.
However, if PR01 doesn’t have teletext the clock will have to be set manually.
NB. Remember the clock setting will be lost if the On-Off button on the front of the set is operated.
22
Downloaded From Disc-Player.com Daewoo Manuals
Downloaded from www.Manualslib.com
manuals search engine
Playing the DVD Video Disc
Basic Playback
1
2
3
4
When you want to enjoy the sound of DVD video discs or audio CDs from the audio system, turn on the audio system and select the input source connected to the
TV/DVD.
If you do not have the necessary equipment to enjoy Dolby Digital sound, set the
Digital Audio Output via the SETUP menu to “PCM (Pulse Code Modulation)”.
Press the [ON/OFF] button on the front part of the set to enter STANDBY mode and press the button on the remote control, then the TV/DVD turns on.
Press the [EJECT] button to open disc tray.
Place a disc on the disc tray with the playback side down.
Press the [PLAY ] button.
Disc tray is closed automatically and play begins.
DISC indicator is displayed on the TV screen.
In the menu screen displayed on the screen.
Press the [ , , , ] button to select the desired item, then press the
[OK(ENTER)] button or the relevant number directly.
The selected item is played.
5 Press the [STOP ] button to stop play.
Press the [ ] button to pause play.
Press the [EJECT] button to remove the loaded disc.
N O T E
• Do not move the TV/DVD during play. Doing so may damage the disc and TV/DVD.
• Use the [EJECT] button on the remote control or TV/DVD to open and close the disc tray.
Do not push the disc tray while it is moving. Doing so may cause TV/DVD to malfunction.
• Do not push up the disc tray or put any objects other than discs on the disc tray. Doing so may cause the TV/DVD to malfunction.
• Be careful of the disc tray not to bite your finger as it is closing. Especially, be careful as it will seriously hurt children.
• When appears on the TV screen while a button is pressed, it means that this function is not available on the disc you are playing.
• Depending on the DVD disc, some operations may be different or restricted. Refer to the instructions of the disc you are playing.
23
Downloaded From Disc-Player.com Daewoo Manuals
Downloaded from www.Manualslib.com
manuals search engine
24
Playing the DVD Video Disc
Special Playback
RESUME Play
When play is stopped, the unit records the point where the [STOP ] button was pressed. Press the [Play ] button and play will resume from this point.
N O T E
• Resume function will be cleared when the [STOP] button is pressed in the
STOP mode.
• Resume function will not work if you turn off the TV/DVD and turn on the
TV/DVD again.
• Resume function will not work when the disc tray is opened.
• The Resume function may not be available with some DVD discs.
PAUSE (Still picture)
Press the [PAUSE/STEP ] button during play.
The TV/DVD will be placed in the still picture mode.
* If CD disc is loaded, the TV/DVD will be placed in the pause mode. (Be attention as loading takes long time.)
Step by Step screen
{DVD
(Digital Versatile Disc)/ VCD (Video Compact Disc)}
Press the [PAUSE/STEP ] button during the screen pauses.
Each time you press the [PAUSE/STEP ] button, the picture advances one scene.
* To resume normal play, press the [PLAY] button.
SKIP FORWARD
Press the [SKIP-F ] button during play.
It skips forward by one unit(chapter or track) whenever the button is pressed.
SKIP BACK
Press the [SKIP-B ] button during play.
When the button is pressed during playback a unit(chapter or track), it returns to the start of the unit. When it is pressed again, it skips back whenever the button is pressed.
If you press the [SKIP-F ] button or [SKIP-B ] button when Tuning Play menu of VCD2.0 is displayed, sometimes menu screen may be displayed again.
Downloaded From Disc-Player.com Daewoo Manuals
Downloaded from www.Manualslib.com
manuals search engine
Playing the DVD Video Disc
Downloaded From Disc-Player.com Daewoo Manuals
Downloaded from www.Manualslib.com
manuals search engine
Search Forward
Press the [F.F/STEP ] button during playback. Each time the button is pressed, you can search the picture forward (at Play ---> x2 ---> x4 ---> x16 ---> x100
---> ... speed)
Search Back
Press the [F.R/STEP ] button during playback. Each time the button is pressed, you can search the picture back (at Play ---> x2 ---> x4 ---> x16 ---> x100 --->
... speed)
Forward Playback in Slow-Motion {DVD/VCD}
Press the [F.F/STEP ] button during the paused mode. Each time the button is pressed, you can play the screen in slow-motion (at Pause ---> x1/16 ---> x1/8
---> x1/4 ---> x1/2 ---> ... speed)
Reverse Playback in Slow-Motion {DVD/VCD}
Press the [F.R/STEP ] button during the paused mode. Each time the button is pressed, you can play the screen in slow-motion (at Pause ---> x1/16 ---> x1/8
---> x1/4 ---> x1/2 ---> ... speed)
N O T E
• The sound is muted during slow-motion play or search scene. But, the speed sound is audible during searching an Audio CD forward/back.
• Search speed increases up to 3 steps for VCD. (x2, x4, x8)
• Search speed of Audio CD can be increased only up to x2.
• Subtitles do not appear on the screen during slow-motion play.
• Slow-motion play increases up to 3 steps for VCD. (x1/4, x1/8, x1/16)
• Reverse playback in slow-motion is not available for VCD.
• Slow-motion play is not available for Audio CD.
SCREEN SAVER
The Screen saver is useful for preventing your display from becoming damaged.
The screen saver picture appears when you leave the TV/DVD in stop mode for about 3 minutes.
25
Using Display Button
To Display GUI Menu
This unit features GUI(Graphic User Interface) Menu showing disc information (title /chapter /track number, elapsed playing time, audio/ subtitle language, angle, and sound) and TV/DVD information (repeat play, play mode, marker, etc.) Some icons only show the indicated information.
Other icons allow the settings to be changed.
1
2
Press the [DISPLAY] button during playback.
Title function can be accessed from the stop mode.
Press the [ , ] button to select the desired item.
The current selected item is indicated in yellow on its GUI menu.
(DVD GUI)
1
1
It shows the current title number. Jump to the desired title number by pressing the [ , ] button or the [NUMBER] button, then press the [OK/ENTER] button.
It shows the current chapter number. Jump to the desired chapter number by pressing the [ , ] button or the [NUMBER] button, then press the [OK/ENTER] button.
* You can move at once by pressing the [SKIP-F] button or [SKIP-B] button.
It shows the elapsed time. Press the [NUMBER] button to set time, select directly scenes by the desired time, then press the
[OK/ENTER] button.
0:16:57
1 ENG
D
6 CH
It shows the current audio soundtrack language, encoding method, and channel number. Press the [ , ] button or [ ] button to change the settings.
OFF
1
NORM.
It shows the current subtitle language. Press the [ , ] button or [ ] button to change the setting.
It shows the current angle number. Press the [ , ] button or
[ ] button to change the angle.
It shows the current sound (NORMAL, 3D SURROUND, DOLBY
PROLOGIC or DOLBY 3 STEREO). Press the [ , ] button to change the setting.
26
Downloaded From Disc-Player.com Daewoo Manuals
Downloaded from www.Manualslib.com
manuals search engine
Using Display Button
To Display GUI Menu
(VCD/CD GUI)
1
It show the current track number. Jump to the desired track number by pressing the [ , ] button or the [NUMBER] button, then press the [OK/ENTER] button.
* You can move at once by pressing the [SKIP-F] button or [SKIP-B] button.
16:57 It shows the elapsed time.
STER.
NORM.
It shows the current audio (STEREO, LEFT, RIGHT). Press the
[ , ] button or [ ] button to change the desired audio channel.
It shows the current sound(NORMAL, 3D SURROUND,
DOLBY PROLOGIC or DOLBY 3 STEREO). Press the [ , ] button to change the setting.
3 Press the [ , ] button to select the desired setting.
• When numbers such as title number are displayed, the [NUMBER] button can also be used for setting instead of the [ , ] button.
• For some functions, the setting will be registered immediately; for others, the
[OK/ENTER] button must be pressed.
4 To clear the GUI Menu Icons, press the [DISPLAY] button again.
N O T E
• Some of the above GUI menu may not work on certain DVD discs.
• Track icon is not displayed in VCD 2.0.
• Examples of GUI Menu Icons (The screens may differ depending on the disc contents)
(GUI in VCD 2.0) (GUI in REPEAT PLAY mode)
1/5
STER.
CHAPT TRACK
NORM.
TITLE ALL
A B
16:57
OFF
27
Downloaded From Disc-Player.com Daewoo Manuals
Downloaded from www.Manualslib.com
manuals search engine
Playing the Desired Scene or Track during Playback
Directly Moving to the Desired Title
Some movie discs may contain multiple titles. If the disc has a movie title menu recorded on it, the [TITLE] button can be used to select the movie title. Details of operation may differ depending on the disc used.
* Selecting a title may not be available on certain DVD discs.
1 Press the [TITLE] button.
A list of the titles on the disc is displayed.
Pressing the [TITLE] button again to resume play from the scene when the [TITLE] button was first pressed.
2 Press the [OK/ENTER] button or
[PLAY] button after pressing the [
, , , ] button to select the desired title.
The selected title now starts playing.
28
Downloaded From Disc-Player.com Daewoo Manuals
Downloaded from www.Manualslib.com
manuals search engine
Playing the Desired Scene or Track during Playback
Playing the Disc, Chapter, Title and Track Repeatedly
Press the [REP] button during play.
Each time this button is pressed, the TV screen changes and the disc will repeat the chapter, title or track.
(DVD) (VCD/CD)
CHAPT
Repeat of chapter being played
TRACK
Repeat of track being played
TITLE
Repeat of title being played
ALL
Repeat of whole disc
OFF
Normal play
OFF
Normal play
* If the [REP] button is pressed during program play, repeat play is operated: “Repeat of the current programmed track” ---> “Repeat of all programs” ---> “Program play”.
* To return to normal play, press the [REP] button until “OFF” is displayed.
Repeating the Given Sections
1 Press the [A-B] button where you want to
Play repeatedly.
* It directly converts to “OFF” mode when you press the
[CLEAR] button.
2 Press the [A-B] button where you want to end repeat paly.
Repeat play of the selection between points A and B starts.
* To return to normal play, press the [REP] button until
“OFF” is displayed.
N O T E
• Repeat play is available only with discs for which the elapsed playing time appears during play.
• Repeat play may not work properly on some DVDs.
• A-B repeat play is available only within a title or a track.
• Some subtitles around point A or B may fail to appear according to DVD type.
A B
A *
29
Downloaded From Disc-Player.com Daewoo Manuals
Downloaded from www.Manualslib.com
manuals search engine
Playing the Desired Scene or Track during Playback
Random Play
You can play titles or tracks in random order
1 Press the [RANDOM] button during stop mode.
TV/DVD automatically begins Random Play.
If you press the [RANDOM] button during Normal Play, the TV/DVD selects other titles (or tracks) randomly and begins to play.
2 To return to normal play, press the [RANDDOM] button during random play.
N O T E
• Notice: This function is only available with music CD, video CD disc.
Random play does not work properly with DVD movie discs.
• Random play may not be available with certain discs.
• If you press the [SKIP-B ] or [SKIP-F ] button during random play, the TV/DVD goes to another track randomly and starts play.
30
Downloaded From Disc-Player.com Daewoo Manuals
Downloaded from www.Manualslib.com
manuals search engine
Playing the Desired Scene or Track during Playback
Program Play
The TV/DVD plays the tracks on the disc in the order you specify.
1 Press the [PGM] button in the play or stop mode.
The program play screen appears on the TV screen.
* To exit the screen, press the [PGM] or [PLAY] button.
Program
Step 1
Total Time 00:00
Clear All
2 Press the [ , , , ] button and press the [NUMBER] button to select the desired track number.
Program
1 5 19 Step 3
Total Time 00:00
Up to 20 tracks can be programmed.
Clear All
Clearing the program...
• To clear the programmed tracks one by one
Press the [ , , , ] button to select the unwanted number, then press the
[CLEAR] button.
• To clear all the programmed tracks
Press the [ , , , ] button to select “Clear All”, then press the
[OK/ENTER] button. Press the [Play] or [OK/ENTER] button to exit the screen.
N.B. The programs are not cleared when the [PGM] button is pressed to exit the screen. (The programs are also cleared when the power is turned off or the disc is removed.)
3 Press the [PLAY] or [OK/ENTER] button.
The selected tracks are stored in player’s memory and play begins with the first one programmed.
N.B. If the [PGM] button is pressed to exit the screen, the selected tracks are not stored in the memory.
* After playing all tracks programmed, play is stopped.
N O T E
• Notice: Program play function is available only with music CD/video CDs. It does not work with DVD movie discs and video CD (version 2.0).
31
Downloaded From Disc-Player.com Daewoo Manuals
Downloaded from www.Manualslib.com
manuals search engine
Playing the Desired Scene or Track during Playback
Searching by Memorizing the Favorite Scene
You can play the favorite scenes as if you mark the favorite pages of a book.
1 Press the [MARKER] button on the scene to be viewed(listened) again.
Indication of “1/5” is stored in the memory. Up to 5 scenes can be stored in the memory.
2 Press the [MARKER SEARCH] button during play.
The stored scenes and current scene are displayed in the screen.
SCREEN
1
SCREEN
2
SCREEN
3
SCREEN
4
SCREEN
5
CURRENT
SCREEN
1/5
3 Press the [ , , , ] button to select the scene, then press the [OK/ENTER] button to play the selected scene.
Play starts from the selected scene.
* To clear the selected scene, press the [CLEAR] button. The current scene may not be cleared.
N O T E
• Some subtitles recorded around the marked scenes may fail to appear on certain DVD discs.
• All the marked scenes are cleared when the power is turned off or the disc is removed.
• The marked scenes are not stored when the DVD or title menu is displayed on the TV screen.
32
Downloaded From Disc-Player.com Daewoo Manuals
Downloaded from www.Manualslib.com
manuals search engine
Displaying menus in disc
Using DVD menu
Some DVD discs have single menu structures called DVD menus. For example,
DVDs programmed with complex contents provide guide menus, and those recorded with various languages provide menus for audio menu and subtitle language.
* The contents of DVD menu and operation differ from disc to disc.
1 Press the [MENU/PBC] button during play.
The DVD menu available on the disc is now displayed.
By pressing the [MENU/PBC] button again resumes play from the scene where the
[MENU/PBC] button was first pressed.
2 Press the [OK/ENTER] button or the
[NUMBER] button(s) after pressing the [ , , , ] button to select desired item.
SCENE SELECTIONS
SPECIAL FEATURES
LANGUAGES
PLAY MOVIE
Example of DVD menu
The selected item is now displayed.
33
Downloaded From Disc-Player.com Daewoo Manuals
Downloaded from www.Manualslib.com
manuals search engine
Storing Viewed DVD Settings
Storing Viewed DVD Settings
This function allows you to store viewed DVD settings. Even though you remove a disc or turn off the [ON/OFF] button, the settings are still stored. If you place the viewed
DVD in the disc tray again, “Resume disc from last position?” message is displayed on the screen. If you play the DVD, the stored settings are automatically called.
1 Place the viewed DVD.
TV screen is displayed as follows.
But, if you do not press any button within 10 seconds, the DVD player is automatically played.
Resume disc from last position?
1. No 2. Yes
2 Press the [ , ] button to select “2.
Yes” and press the [OK/ENTER] button.
The stored settings are automatically called and the player resumes disc play from last play position.
N O T E
• The TV/DVD can store the following 6 settings.
- Last viewed scene (Resume function)
- TV Aspect
- Disc Audio language
- Disc Subtitle language
- Disc Menu language
- Camera
• Every setting is stored.
• Only the DVD setting can be stored.
• If you remove a disc or press the [ ] button to turn off the power when the DVD or title menu is displayed on the TV, settings are not stored.
34
Downloaded From Disc-Player.com Daewoo Manuals
Downloaded from www.Manualslib.com
manuals search engine
Changing Subtitle Language
Changing Subtitle Language
In the SETUP screen, you can select the initial subtitle and change to other language. This function works only if the subtitle languages are recorded in multiple languages.
1
2
Press the [ ] button during play.
If there is no subtitle, “OFF” or “ ” instead of language is displayed.
Press the [ ] button repeatedly until the desired language is selected.
* To clear an on-screen subtitle, press the [ ] button repeatedly and select “OFF”.
OFF
1 ENG
N O T E
• Subtitle language may not be converted into the selected language immediately.
• When you play a disc with caption function, subtitle and caption title can be overlapped in the TV screen of caption mode. In this case, turn off the caption function or turn off the caption of TV set.
35
Downloaded From Disc-Player.com Daewoo Manuals
Downloaded from www.Manualslib.com
manuals search engine
Changing Audio Language
Changing Audio Language
In the SETUP screen, you can select the initial audio and change to other language. This function works only if the subtitle languages are recorded in multiple languages.
1
Press the [ ] button during play.
1 ENG
D
6 CH
- DVD -
STER.
- VCD/CD -
2 Press the [ ] button repeatedly until the desired language is selected.
2 FRE
D
6 CH
- DVD -
LEFT
- VCD/CD -
N O T E
• If the desired language is not selected by pressing the button several times, it means the language is not available.
• When the power is turned off or disc is removed, the subtitle is displayed in a language of the SETUP menu. Language in the disc is displayed if this language is not recorded in the disc.
• Some discs may not be changed by pressing the [ ] button.
36
Downloaded From Disc-Player.com Daewoo Manuals
Downloaded from www.Manualslib.com
manuals search engine
Using Zoom Feature
Using Zoom Feature
The Zoom feature allows you to enlarge the video image 4 times or 16 times.
1 Press the [ ] button during play or pause.
The region to zoom in the centre of the screen is displayed.
Whenever you press the [ ] button, the TV screen is changed as shown on the right.
Zoom magnification is displayed in the right top of zoom region.
Press the [ , , , ] button to move the zoom region.
x16 x4
2 Press the [OK/ENTER] button.
The selected screen is displayed as full screen.
3 To resume normal screen,
Press the [ ] button again to release the Zoom feature, play or pause screen is displayed.
N O T E
• Some discs may not respond to the Zoom feature.
• The Zoom Feature is not available with subtitles or menus included on DVD video discs.
37
Downloaded From Disc-Player.com Daewoo Manuals
Downloaded from www.Manualslib.com
manuals search engine
Viewing from Another Angle or Producing a 3D SURROUND Effect
Viewing a Scene from Another Angle
Same DVDs may contain scenes which have been shot simultaneously from a number of different angles. For these discs, the same scene can be viewed from each of these different angles using the [ ] button.
* The recorded angles differ depending on the disc used.
1
2
Press the [ ] button during play.
Press the [ ] button repeatedly until the desired angle is selected.
N O T E
• This function only works for discs having scenes recorded at different angles.
1
2
38
Producing a 3D SURROUND Effect
This unit can produce a 3D Surround effect, using 3D Surround Sound technology, which simulates multi-channel audio play from two conventional stereo speakers instead of five or more speakers required to listen to multichannel audio at home theatre. This feature works with DVD discs encoded with
Dolby Pro Logic and Dolby Digital audio tracks.
1
2
Press the [DISPLAY] button during play.
Press the [ , ] button repeatedly until the desired sound is selected.
N O T E
• This 3D Surround effect may not be available in some DVD discs recorded with a mono audio soundtrack.
• Turn off the TV surround sound and other surround effects when using this 3D surround effect.
• For the best 3D Surround effect using only two speakers, it is recommended that the two speakers be positioned approximately 183cm to 244cm apart, and the listening position should be 183cm to 244cm away from the speakers.
NORM.
3D SUR
Downloaded From Disc-Player.com Daewoo Manuals
Downloaded from www.Manualslib.com
manuals search engine
Playing an MP3 Disc
Playing an MP3 File
1 Press the an MP3 disc in the machine.
The MP3 menu is displayed.
MP3
ABCD
MP3-1
MP3-2
MP3-3
MP3-4
MP3-5
MP3-6
MP3-7
MP3-8
MP3-9
2 Press the [ , ] button to select a directory containing the desired MP3 file, then press the [OK/ENTER] button.
Program
Clear All
3 Select the desired MP3 file in the selected directory by pressing the
[ , ] button.
Program MP3
ABCD
..
TRACK_1
TRACK_2
TRACK_3
TRACK_4
TRACK_5
TRACK_6
TRACK_7
TRACK_8 Clear All
4 Press the [OK/ENTER] or [PLAY] button to play a file.
• Press the [SKIP-F] or [SKIP-B] button to play the next file or previous file during playback.
• If you press the [TITLE] button during play, the first page of the current directory is displayed. Then, if you press the [TITLE] button within 5 seconds again, the next page is displayed.
• To move to the initial directory during play, press the [MENU/PBC] button.
N O T E
• The file and directory name are only displayed in English.
• If there is an impossible code to display, ( _ ) is displayed instead of English.
• If there is no MP3 file in a directory, is displayed as the directory name.
• This unit can play up to 256 directories or 256 files per disc.
• Disc format is compatible with ISO9660 only.
• Please record MP3 files using the software that can create a FILE SYSTEM. Otherwise, these
MP3 files cannot be played.
Ex) If you use Direct-CD creator software, it is recommended that you must use “Easy-CD
Creator”, which creates an ISO9660 file system.
• If other files instead of MP3 files are already stored on the CD-R/RW disc, do not use that disc. Please use a new disc.
39
Downloaded From Disc-Player.com Daewoo Manuals
Downloaded from www.Manualslib.com
manuals search engine
Programming an MP3 File
1 Press the an MP3 disc in the machine.
The MP3 menu is displayed.
MP3
ABCD
MP3-1
MP3-2
MP3-3
MP3-4
MP3-5
MP3-6
MP3-7
MP3-8
MP3-9
Playing an MP3 Disc
Program
Clear All
2 Press the [ , ] button to select a directory containing the desired MP3 file, then press the [OK/ENTER] button.
MP3
ABCD
..
TRACK_1
TRACK_2
TRACK_3
TRACK_4
TRACK_5
TRACK_6
TRACK_7
TRACK_8
Program
Clear All
3 Select the desired MP3 file in the selected directory by pressing the
[ , ] button.
MP3
ABCD
..
TRACK_1
TRACK_2
TRACK_3
TRACK_4
TRACK_5
TRACK_6
TRACK_7
TRACK_8
Program
Clear All
4 Press the [PGM] button to add the selected file to a program list.
Repeat step 3-4 to select another track.
Up to 60 files can be programmed.
MP3
ABCD
..
TRACK_1
TRACK_2
TRACK_3
TRACK_4
TRACK_5
TRACK_6
TRACK_7
TRACK_8
Program
TRACK_2
TRACK_7
TRACK_6
TRACK_9
Clear All
5 Press the [ ] button to select the desired MP3 file and press the
[OK/ENTER] button or [PLAY] button to begin playback.
If you want to enter the main menu, press the
[ ] button.
After playing all tracks, programmed play is stopped.
MP3
ABCD
..
TRACK_1
TRACK_2
TRACK_3
TRACK_4
TRACK_5
TRACK_6
TRACK_7
TRACK_8
Program
TRACK_2
TRACK_7
TRACK_6
TRACK_9
Clear All
40
Downloaded From Disc-Player.com Daewoo Manuals
Downloaded from www.Manualslib.com
manuals search engine
Playing an MP3 Disc
Playing Repeatedly and Editing the Programmed MP3 File
Playing an MP3 file repeatedly
• If you press the [REP] button once during play, the current MP3 file will play repeatedly.
MP3
ABCD
Program
..
TRACK_1
TRACK_2
TRACK_7
TRACK 6
• If you press the [REP] button twice during play, all MP3 files on the disc will play repeatedly.
MP3
ABCD
Program
..
TRACK_1
TRACK_2
TRACK_7
TRACK 6
• If you press the [REP] button three times, repeat play will be cancelled.
Clearing MP3 files one by one
• Press the [ , , , ] button to select the unwanted MP3 file on the program list,then press the [CLEAR] button.
Clearing all the MP3 files in the program list
• Press the [ , , , ] button to select the “Clear All” and press the [OK/ENTER] button.
41
Downloaded From Disc-Player.com Daewoo Manuals
Downloaded from www.Manualslib.com
manuals search engine
Initial Settings...
General Information of Initial Settings
Once the initial settings have been completed, the TV/DVD can always be operated under the same conditions. Especially with DVD discs, the settings will be retained in the memory until they are changed even though the power is off.
1 Press the [SETUP] button in the stop or play mode.
The initial settings menu is displayed.
Disc Audio
Disc Subtitle
Disc Menu
Rating
Password
TV Aspect
Menu Language
Digital Audio Output
Others
2 Press the [ , ] button to select the desired item.
The screen will show the current setting for the selected item, and the alternate setting(s).
• Disc Audio (see page 43)
• Disc Subtitle (see page 43)
• Disc Menu (see page 43)
• Rating (see page 45)
• Password (see page 46)
• TV Aspect (see page 47)
• Menu Language (see page 48)
• Digital Audio Output (see page 49)
• Others (see page 50)
Original
English
French
German
Spanish
Italian
Chinese
Polish
Hungarian
Russian
Other - - - -
3 Press the [ ] button and then the [ , ] button to select the desired setting and press the [OK/ENTER] button.
Some items require additional steps.
4 To exit the current SETUP menu, press the [SETUP] or [PLAY] button.
42
Downloaded From Disc-Player.com Daewoo Manuals
Downloaded from www.Manualslib.com
manuals search engine
Initial Settings...
Selecting disc languages {DVD Only}
In the initial settings, you can select Disc Audio, Disc Subtitle and Disc Menu for all discs to be played.
When you play the DVD video disc including Disc Subtitle, the TV/DVD automatically displays the pre-selected subtitle language.
1 In the SETUP screen, press the [ , ] button to select “Disc Audio” and press the [ ].
Disc Audio
Disc Subtitle
Disc Menu
Rating
Password
TV Aspect
Menu Language
Digital Audio Output
Others
Original
English
French
German
Spanish
Italian
Chinese
Polish
Hungarian
Russian
Other - - - -
2 Press the [ , ] button to select the desired language and then press the [OK/ENTER].
• Original: The original language of each disc will be selected.
• Korean, English: The Korean and English will be selected.
• Other: Other languages can be selected. You can input 4-character language code. (Refer to the language codes on the next page. Press the
[CLEAR] button if an incorrect language code is entered.)
3 The “Disc Subtitle” and “Disc Menu” are selected by the same method.
N O T E
• If the language selected is not recorded on the disc, the original language designated by each disc will be selected.
43
Downloaded From Disc-Player.com Daewoo Manuals
Downloaded from www.Manualslib.com
manuals search engine
Initial Settings...
Table of Language Codes and Their Abbreviations
Enter the appropriate language code for the initial settings of “Disc Audio”, “Disc Subtitle” and/or “Disc
Menu”.
Code Language
6565 Afar
6566 Abkhazian
6570 Afrikaans
6577 Ameharic
6582 Arabic
6583 Assamese
6588 Aymara
6590 Azerbaijani
6665 Bashkir
6669 Byelorussian
6671 Bulgarian
6672 Bihari
6678 Bengali, Bangla
6679 Tibetan
6682 Breton
6765 Catalan
6779 Corsican
6783 Czech
6789 Welsh
6865 Danish
6869 German
6890 Bhutani
6976 Greek
6978 English
6979 Esperanto
6983 Spanish
6984 Estonian
6985 Basque
7065 Persian
7073 Finnish
7074 Fiji
Code Language
7079 Faroese
7082 French
7089 Frisian
7165 Irish
7168 Scots Gaelic
7176 Galician
7178 Guarani
7185 Gujarati
7265 Hausa
7273 Hindi
7282 Croatian
7285 Hungarian
7289 Armenian
7365 Interlingua
7378 Indonesian
7383 Icelandic
7384 Italian
7387 Hebrew
7465 Japanese
7473 Yiddish
7487 Javanese
7565 Georgian
7575 Kazakh
7576 Greenlandic
7577 Cambodian
7578 Kannada
7579 Korean
7583 Kashmiri
7585 Kurdish
7589 Kirghiz
7665 Latin
Code Language
7678 Lingala
7679 Laothian
7684 Lithuanian
7686 Latvian, Lettish
7771 Malagasy
7773 Maori
7775 Macedonian
7776 Malayalam
7778 Mongolian
7779 Moldavian
7782 Marathi
7783 Malay
7784 Maltese
7789 Burmese
7865 Nauru
7869 Nepali
7876 Dutch
7879 Norwegian
7982 Oriya
8065 Panjabi
8076 Polish
8083 Pashto, Pushto
8084 Portuguese
8185 Quechua
8277 Rhaeto-Romance
8279 Rumanian
8285 Russian
8365 Sanskrit
8368 Sindhi
8372 Serbo-Croatian
8373 Singhalese
Code Language
8375 Slovak
8376 Slovenian
8377 Samoan
8378 Shona
8379 Somali
8381 Albanian
8382 Serbian
8385 Sundanese
8386 Swedish
8387 Swahili
8465 Tamil
8469 Telugu
8471 Tajik
8472 Thai
8473 Tigrinya
8475 Turkmen
8476 Tagalog
8479 Tonga
8482 Turkish
8484 Tatar
8487 Twi
8575 Ukrainian
8582 Urdu
8590 Uzbek
8673 Vietnamese
8679 Volapük
8779 Wolof
8872 Xhosa
8979 Yoruba
9072 Chinese
9085 Zulu
44
Downloaded From Disc-Player.com Daewoo Manuals
Downloaded from www.Manualslib.com
manuals search engine
Initial Settings...
Selecting Parental Control Rating Levels {DVD Only}
This is to prohibit playing of DVDs which are unsuitable for children.
Some DVDs have the rating restriction function which enables parents to prevent children from playing discs.
TV/DVD also include password setting functions to prevent children from changing the level.
1 In the SETUP screen, press the [ , ] button to select “Rating” and press the [ ] button.
Disc Audio
Disc Subtitle
Disc Menu
Rating
Password
TV Aspect
Menu Language
Digital Audio Output
Others
5
4
3
8
7
6
2
1
Unlock
2 Press the [ , ] button to select the desired level and press the
[OK/ENTER] button.
Disc Audio
Disc Subtitle
Disc Menu
Rating
Password
TV Aspect
Menu Language
Digital Audio Output
Others
8 Blocked
4
3
7 Blocked
6
5
2
1
Unlock
N O T E
• You cannot play DVD video discs rated higher than the level you selected unless you release the parental lock. For example, when you select level 7, discs rated higher than level 7 cannot be played. (Higher rated means near to adult movie.)
• If you change the level and enter a password, playing all DVDs with ratings higher than your selection will be locked. If you want to change the rating again, you have to enter the correct password. For example: if you change the level to “5”, the TV/DVD will not play discs with ratings of “6”, “7”, or “8”. If you change the level again, you must enter the correct password.
45
Downloaded From Disc-Player.com Daewoo Manuals
Downloaded from www.Manualslib.com
manuals search engine
Initial Settings...
Designating Password {DVD Only}
If you change the rating level to “7” or lower, you must enter a 4-number
“password” to prevent playing discs with higher ratings.
1 In the SETUP screen, press the [ , ] button to select “Password” and press the [ ] button.
New
- - - -
Disc Audio
Disc Subtitle
Disc Menu
Rating
Password
TV Aspect
Menu Language
Digital Audio Output
Others
2
3
Press the [NUMBER] button to input a 4-number password and press the [OK/ENTER] button.
* Do not forget your password.
Input the 4-number password again and press the
[OK/ENTER] button to verify.
* Setting has been completed.
To change/clear memorized password
1 In the SETUP screen, press the [ , ] button to select “Password” and press the [ ] button.
2 Press the [NUMBER] button to input a 4-number password and press the [OK/ENTER] button.
3 To change or clear your password, select the
“Change” or “Clear” and press the [OK/ENTER] button.
Disc Audio
Disc Subtitle
Disc Menu
Rating
Password
TV Aspect
Menu Language
Digital Audio Output
Others
Change
Clear
If you forget your memorized password,
1 In the SETUP screen, press the [ ] button to select “Password”.
2 Enter 6-digit number “210499” and press the [OK/ENTER] button. The 4-number password is cleared.
3 Enter a new password.
46
Downloaded From Disc-Player.com Daewoo Manuals
Downloaded from www.Manualslib.com
manuals search engine
Initial Settings...
Selecting TV Aspect
Select the appropriate screen type according to your TV set: 4:3 or 16:9.
1 In the SETUP screen, press the [ , ] button to select “TV Aspect” and press the [ ] button.
2 Press the [ , ] button to select the desired Aspect and press the
[OK/ENTER] button.
Disc Audio
Disc Subtitle
Disc Menu
Rating
Password
TV Aspect
Menu Language
Digital Audio Output
Others
4:3 Letterbox
4:3 Panscan
16:9 Wide
Disc Audio
Disc Subtitle
Disc Menu
Rating
Password
TV Aspect
Menu Language
Digital Audio Output
Others
4:3 Letterbox
4:3 Panscan
16:9 Wide
4:3 Letterbox
The video material not formatted in the Pan & Scan style is played in the letterbox style. Black bands appear at top and bottom of screen.
4:3 Panscan
Select when a conventional TV set is connected.
The video material formatted in the Pan & Scan style is played in such a style. (For screen formatted in 16:9, then only the centre part of screen can be displayed).
16:9 Wide
Select when a wide-screen TV set is connected.
The picture is played in full screen. (The widescreen TV is also required to be set to “FULL”.)
47
Downloaded From Disc-Player.com Daewoo Manuals
Downloaded from www.Manualslib.com
manuals search engine
Initial Settings...
Selecting Menu Language
It is for selecting DVD menu language and the language which displays on the TV.
1 In the SETUP screen, press the [ , ] button to select “Menu Language” and press the [ ] button.
2 Press the [ , ] button to select the desired language and press the
[OK/ENTER] button.
,
Disc Audio
Disc Subtitle
Disc Menu
Rating
Password
TV Aspect
Menu Language
Digital Audio Output
Others
English
Spanish
French
German
Italian
Disc Audio
Disc Subtitle
Disc Menu
Rating
Password
TV Aspect
Menu Language
Digital Audio Output
Others
English
Spanish
French
German
Italian
48
Downloaded From Disc-Player.com Daewoo Manuals
Downloaded from www.Manualslib.com
manuals search engine
Initial Settings...
Selecting Digital Audio Output
Each DVD disc has a variety of audio output options.
1 In the SETUP screen, press the [ , ] button to select “Digital Audio
Output” and press the [ ] button.
DOLBY
DIGITAL
/PCM
Stream/PCM
PCM
Disc Audio
Disc Subtitle
Disc Menu
Rating
Password
TV Aspect
Menu Language
Digital Audio Output
Others
2 Press the [ , ] button to select the desired digital audio output and press the [OK/ENTER] button.
Disc Audio
Disc Subtitle
Disc Menu
Rating
Password
TV Aspect
Menu Language
Digital Audio Output
Others
DOLBY
DIGITAL
Stream/PCM
PCM
DOLBY DIGITAL/PCM
Select “DOLBY DIGITAL/PCM” if a digital output is supplied to a Dolby Digital decoder (or an amp or other equipment with Dolby Digital decoder).
Stream/PCM
Select “Stream/PCM” if a digital output is supplied to an amp or other equipment with
DTS decoder, Dolby Digital decoder and MPEG decoder.
PCM
Select “PCM” if a digital output is supplied to an amp or other equipment with PCM only (or MD recorder or DAT deck).
N O T E
• If a digital audio output signal is supplied to a receiver or other equipment without a corresponding digital decoding capability, a very loud noise may be produced which could permanently damage the speakers.
• The DTS DVD disc sound is played only when the TV/DVD is connected to an amp with a
DTS decoder.
Play disc
96kHz Linear PCM DVD
DTS DVD
Dolby Digital DVD
MPEG DVD
Audio CD/Video CD
DTS Audio CD
Stream/PCM
Output
Dolby Digital/PCM PCM only
PCM
DTS bit stream
Dolby Digital bit stream Dolby Digital bit stream
MPEG bit stream PCM
PCM PCM
DTS bit stream
PCM
No Output
PCM
No Output
PCM
PCM
PCM
DTS bit stream DTS bit stream
49
Downloaded From Disc-Player.com Daewoo Manuals
Downloaded from www.Manualslib.com
manuals search engine
Others
Initial Settings...
1 In the SETUP screen, press the [ , ] button to select “Others” and press the [ ] button.
Disc Audio
Disc Subtitle
Disc Menu
Rating
Password
TV Aspect
Menu Language
Digital Audio Output
Others
DRC Off
PBC On
Vocal On
2 Press the [ , ] button to select the desired item and press the [OK/ENTER] button.
DRC (Dynamic Range Compression)
What is DRC (Dynamic Range Compression) ?
It is also called “Midnight Mode”. It can decrease the difference between the loudest and the softest tone and prevent sudden loud tone. Therefore, you can get the soft voice clearly without disturbing others at night.
On: It compresses the dynamic range.
Off: It outputs the dynamic range as it originally was.
PBC (PlayBack Control)
On: Menu mode works when playing a disc with PBC function (Video CD version
2.0).
Off: Menu mode does not work when playing a disc with PBC function (Video CD version 2.0).
N O T E
• The DRC function works only during playing the Dolby Digital DVD discs.
• The level of Dynamic Range may differ depending on the DVD disc.
50
Downloaded From Disc-Player.com Daewoo Manuals
Downloaded from www.Manualslib.com
manuals search engine
About DVD
Playable Disc
This TV/DVD can play the following discs.
Type Disc mark
DVD video discs video CDs
Music CDs
MP3
Contents
Audio+Video
Audio+Video
Audio
Disc size Maximum playback time
12cm
8cm
12cm
Approx. 4 hours (single sided disc)
Approx. 8 hours (double sided disc)
Approx. 80 minutes (single sided disc)
Approx. 160 minutes (double sided disc)
Approx. 74 minutes
Approx. 20 minutes 8cm
12cm
8cm
Approx. 74 minutes
Approx. 20 minutes
Audio 12cm Approx. 160 minutes
In addition, this unit can play back a CD-R and CD-RW disc. You cannot play back discs other than those listed above (CD-ROM, CD-EXTRA, CD-G, photo CD, and CD-i discs cannot be played on this TV/DVD.)
This TV/DVD is manufactured to adopt the PAL/SECAM colour broadcasting system in operation, but it can also play back NTSC-type DVD video discs.
Region Number
TV/DVD and DVD discs are marked for the Region number to be played in the relevant country. Only if the Region number described on the DVD disc corresponds to the Region number of this TV/DVD, this TV/DVD can play that disc. The Region number of this TV/DVD is 2. Please use only discs whose Region number is 2 or is not limited to the Regional Restriction (ALL). Otherwise, this TV/DVD does not work.
2
(Region Number 2) (No Regional Restriction)
Notes on Copyright
This product incorporates copyright protection technology that is protected by method claims of certain U.S.
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is tntended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
51
Downloaded From Disc-Player.com Daewoo Manuals
Downloaded from www.Manualslib.com
manuals search engine
Discs
Always...
• handle your discs with care.
Hold a disc with fingers on the border or hole,
• place disc with the label facing upward (in case of a single-sided disc),
• place the disc properly into the tray using the proper guide area,
• use a soft cloth to clean discs if necessary, wipe from the centre to the border,
• always put discs back into their cases after playing and store in a vertical position.
Never...
• never close the tray with two discs on it or with a disc slipping out of the guide area,
• never play cracked, chipped or deformed discs nor try to repair them with adhesive tape or glue,
• never write on the disc,
• never move the player during playback,
• never scratch discs or store them in places of direct sunlight, high humidity or high temperature,
• never try to play a Photo CD , CD-G or CD-i in this TV/DVD.
• never use record cleaning sprays, benzine, static electricity liquids or any other solvent, if the disc surface is dirty.
• Wipe gently with a soft damp (water only) cloth, never wipe the disc in a circular motion, since circular scratches are likely to occur and could cause noise during playback.
If you hear strange noises or vibrations coming out of the unit once a disc has started to play, rapidly press the STOP button of the remote control or front of player.
52
Downloaded From Disc-Player.com Daewoo Manuals
Downloaded from www.Manualslib.com
manuals search engine
Before Calling Service Personnel
Symptoms Correction
Check the external antenna and cable TV conditions.
Check whether you select the correct channel.
• Colour is not displayed and net pattern is displayed on the specific channel.
• Vertical and horizontal line and net pattern are displayed on the screen in a moment.
Vibration is also displayed.
• Pictures are overlapped and white and black spots are displayed
• The original colours are not displayed in a screen in specific areas.
• Picture is displayed irregularly.
• No picture and sound
Check the interference wave caused by car, neon sign, and high frequency.
Check the strong interference radio wave from wave of other devices or radio station. Please stop the use of mobile phone, hair dryer, and electric drill.
Check damage of antenna or connection of antenna cable.
Check the height and direction of antenna. If it is incorrect, please adjust the antenna.
Remove from magnetic fields or rotate set until purity error disappears.
Check the connection of antenna cable (incorrect connection or disconnection).
Move this product to another location.
Plug the power cord into the wall outlet securely.
Press the [TV/AV/DVD] button to change input mode.
• No sound
• The remote control does not work properly
• The playback picture is poor
• The DVD player does not start playback
Check the volume.
Check a stoppage of power supply
Check whether the power cord is plugged into the wall outlet.
The batteries in remote control may be exhausted or loaded in wrong polarity.
Check whether the remote control is too far from the player and is not pointed at the remote sensor of the player.
Check the contamination of a disc and clean the disc.
Insert a disc.
Insert a playable disc. Check the disc type, colour system and Region code.
Place the disc with the playback side down.
Place the disc on the disc tray correctly inside the guide.
Check the contamination of a disc and clean the disc.
Press the [MENU] button to turn off the menu screen.
Cancel the Rating function or change the rating level.
53
Downloaded From Disc-Player.com Daewoo Manuals
Downloaded from www.Manualslib.com
manuals search engine
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project