Samsung HW-H600 User manual

HW-H600
User manual
Wireless Audio - SoundStand
Imagine the possibilities
Thank you for purchasing this Samsung product.
To receive a more complete service, please register your product at
www.samsung.com/register
FEATURES
FEATURES
TV SoundConnect
TV SoundConnect lets you listen to audio from your TV on your SoundStand via a Bluetooth connection and lets you
control the sound.
HDMI
HDMI transmits video and audio signals simultaneously, and provides a clearer picture.
The unit is also equipped with the ARC function which lets you listen to sound from your TV through the SoundStand
via an HDMI cable.This function is only available if you connect the unit to an ARC compliant TV.
Surround Sound Expansion
The Surround Sound Expansion feature adds depth and spaciousness to your listening experience. Surround Sound
Expansion is powered by Sonic Emotion.
Special Sound Modes
You can select different sound modes - CINEMA / SPORTS / VOICE / MUSIC / STANDARD (OFF) - depending on the
type of content you want to enjoy.
Multi-function Remote Control
You can use the supplied remote control to control various operations with the simple press of a button.
USB Host Support
You can connect and play music files from external USB storage devices such as MP3 players, USB flash memory,
etc. using the SoundStand's USB HOST function.
Bluetooth Function
You can use connect a Bluetooth device to the SoundStand and enjoy music with high quality stereo sound, all
without wires!
NFC
Connect your NFC compatible device via Bluetooth to the SoundStand using this simple set-up procedure and play
music on the device through the SoundStand.
2
SAFETY INFORMATION
SAFETY INFORMATION
ENG
SAFETY WARNINGS
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates “dangerous voltage” inside
the product that presents a risk of electric shock or
personal injury.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates important instructions
accompanying the product.
WARNING : To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
• This apparatus shall always be connected to a AC outlet with a protective grounding connection.
• To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug
shall be readily operable.
CAUTION
• Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases on the apparatus.
• To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the power plug
must be easily and readily accessible at all times.
3
SAFETY INFORMATION
PRECAUTIONS
68.6 mm
99.1mm
99.1mm
99.1mm
Ensure that the AC power supply in your house complies with the power requirements listed on the identification
sticker located on the back of your product. Install your product horizontally, on a suitable base (furniture), with enough
space around it for ventilation 7~10 cm. Make sure the ventilation slots are not covered. Do not place the unit on
amplifiers or other equipment which may become hot. This unit is designed for continuous use. To fully turn off the
unit, disconnect the AC plug from the wall outlet. Unplug the unit if you intend to leave it unused for a long period of
time.
D
i thunderstorms,
h d
di
h AC plug
l from
f
During
disconnect
the
the
wall outlet. Voltage peaks due to lightning could damage
the unit.
D
h uniti to di
li h or other
h h
Do not expose the
direct sunlight
heat
sources.
This could lead to overheating and cause the unit to
malfunction.
P
t t th
d t ffrom moisture
i t
(i(i.e. vases),) and
d
Protect
the product
excess heat (e.g. a fireplace) or equipment creating
strong magnetic or electric fields. Disconnect the power
cable from the AC supply if the unit malfunctions. Your
product is not intended for industrial use. It is for
personal use only.
Condensation may occur if your product has been
stored in cold temperatures. If transporting the unit
during the winter, wait approximately 2 hours until the
unit has reached room temperature before using.
Th
tt i used
d with
ith thi
d t contain
t i chemicals
h i
The b
batteries
this product
that are harmful to the environment.
Do not dispose of batteries in the general household
trash.
Do not dispose of batteries in a fire.
Do not short circuit, disassemble, or overheat the
batteries.
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
4
CONTENTS
CONTENTS
ENG
2
FEATURES
14 FUNCTIONS
14
Input mode
3
SAFETY INFORMATION
14
ARC (HDMI OUT)
3
Safety warnings
15
Bluetooth
4
Precautions
17
NFC
18
TV SoundConnect
GETTING STARTED
19
USB
6
Before reading the user’s manual
20
Software upgrade
6
What’s included
7
DESCRIPTIONS
7
Top/front panel
22 APPENDIX
8
Rear panel
22
Specifications
22
License
6
21 TROUBLESHOOTING
9
REMOTE CONTROL
9
Tour and using the remote control
11 INSTALLATION
11
SoundStand installation
12 CONNECTIONS
12
Connecting an external device using an
HDMI cable
13
Connecting an external device using
OPTICAL (DIGITAL) cable or AUDIO
(ANALOGUE) cable
5
GETTING STARTED
GETTING STARTED
BEFORE READING THE USER’S MANUAL
Note the following terms before reading the user manual.
+ Icons used in this manual
Icon
Term
Caution
Note
Definition
Indicates a situation where a function does not operate or settings may be canceled.
Indicates tips or instructions on the page that help you operate a function.
+ Safety Instructions and Troubleshooting
1) Be sure to familiarise yourself with the Safety Instructions before using this product. (See page 3)
2) If a problem occurs, check Troubleshooting. (See page 21)
+ Copyright
©2014 Samsung Electronics Co.,Ltd.
All rights reserved; no part of this user’s manual may be reproduced or copied without the prior written permission of
Samsung Electronics Co.,Ltd.
WHAT’S INCLUDED
Check for the supplied accessories shown below.
(Protection pad : 4ea)
Remote Control /
Lithium Battery
(3V : CR2032)
User Manual
AUX Cable
Pad
Adapter
Power Cord
USB Cable
NFC Sticker
● The appearance of the accessories may differ slightly from the illustrations above.
● Use the dedicated USB cable to connect external USB devices to the unit.
6
DESCRIPTIONS
DESCRIPTIONS
ENG
TOP/FRONT PANEL
FUNCTION BUTTON
Selects the D.IN, AUX, HDMI, BT, TV, USB
input.
● While the unit is powered on, pressing the
( ) button for more than 3 seconds sets
the button to act as MUTE button. To
cancel MUTE button setup, press the ( )
button for more than 3 seconds again.
VOLUME +/Controls the volume level.
The numeric value of the volume level
appears in the front panel display.
POWER BUTTON
Turns the power on and off.
REMOTE CONTROL SENSOR
DISPLAY
The remote control can operate
SoundStands made by SAMSUNG only.
Displays the current mode.
● When you turn on this unit, there will be a 4 to 5 second delay before it produces sound.
● If you want to enjoy the sound only from the SoundStand, you must turn off the TV's speakers in the Audio
Setup menu of your TV. Refer to the owner's manual supplied with your TV.
7
DESCRIPTIONS
REAR PANEL
OPTICAL IN
AUX IN
Connect to the digital (optical)
output of an external device.
Connect to the Analogue output
of an external device.
Power Supply IN
HDMI OUT Jack
Connect the AC power adaptor to
the power supply jack, and then
connect the AC power adaptor plug
to a wall outlet.
Outputs digital video and audio
signals simultaneously using an HDMI
cable.
USB PORT
HDMI IN Jack
Connect USB devices such as
MP3 players here to the play files
on the devices.
Connects both video and audio
signals using an HDMI cable.Use
when connecting a supported
external device.
● When disconnecting the power cable of the AC power adaptor from the wall outlet, pull the plug. Do not
pull the cable.
● Do not connect this unit or other components to an AC outlet until all connections between components
are complete.
8
REMOTE CONTROL
REMOTE CONTROL
SOURCE
Press to select a source connected to the SoundStand.
POWER
SOURCE
MUTE
WOOFER
LEVEL
VOL
Surr.
Sound
SOUND
EFFECT
Bluetooth
POWER
DIMMER
SYNC
SYNC
REPEAT
Surr.Sound (Surround Sound Expansion)
Press the Surr.Sound button on the remote to control the adds depth
and spaciousness to the sound.
SURROUND SOUND AUTO : If the sound source is more than 2
channels then SURROUND SOUND ON turns on automatically. On the
other hand, if the sound source is less than 2 channels (STEREO), then
mode is automatically set to SURROUND SOUND OFF.
WOOFER LEVEL
You can control the woofer volume.
Press or button on the WOOFER LEVEL button to increase or
decrease the woofer volume. You can set it from SW -6 to SW +6.
DIMMER/ANYNET+
DIMMER : Press the DIMMER/ANYNET+ button on the remote to
control the brightness of the display.
ANYNET+ : Turns on the ANYNET+ function which lets the remote
from your ANYNET+ Samsung TV control the SoundStand. The
ANYNET+ function toggles on and off each time the DIMMER/
ANYNET+ button is pressed and held for more than 5 seconds.
Skip Forward
If there is more than one file on the device you are playing, and you
press the $ button, the next file is selected.
REPEAT
You can set the REPEAT function during music playback from a USB
device.
REPEAT OFF : Cancels Repeat Playback.
REPEAT FILE : Repeatedly play a track.
REPEAT ALL : Repeatedly play all tracks.
REPEAT RANDOM : Plays tracks in random order. (A track that has
already been played may be played again.)
Play/Pause
Press the ► button again to pause playing the file temporarily.
Press the ► button again to play the selected file.
● SoundStand is a Samsung proprietary name.
● Operate the TV using the TV's remote control.
9
ENG
TOUR AND USING THE REMOTE CONTROL
REMOTE CONTROL
POWER
Turns the SoundStand on and off.
POWER
SOURCE
MUTE
You can turn the volume down to 0 with the push of a button. Press
again to restore the sound to the previous volume level.
VOLUME
Adjusts the volume level of the unit.
SOUND EFFECT
Press SOUND EFFECT on the remote control to select a sound
mode. Select the STANDARD mode if you want to enjoy the original
sound. We recommend that you select a Sound Effect mode based on
the source material and your personal taste.
Skip Back
If there is more than one file on the device you are playing, and you
press the # button, the previous file is selected.
MUTE
WOOFER
LEVEL
VOL
Surr.
Sound
SOUND
EFFECT
Bluetooth
POWER
DIMMER
SYNC
SYNC
REPEAT
Bluetooth POWER
Press the Bluetooth POWER button on the remote to turn the
Bluetooth Power function on and off.
See pages 16 and 18 for details.
AUDIO SYNC
If the SoundStand is connected to a digital TV and the video appears
out of sync with the audio, press the Audio Sync buttons to sync the
audio with the video.
Press the AUDIO SYNC +/- buttons to set the audio delay from 0 to
300 ms. In USB mode, TV mode, or BT mode, the Audio Sync
function may not work.
+ Installing Batteries in the Remote Control
1. Use a coin to turn the
remote control cover
counterclockwise to
remove it as shown in the
figure above.
2. Insert a 3V lithium battery. Keep the positive
(+) pole facing up when inserting the battery.
Put the battery cover on and align the ' '
marks side by side as shown in the figure
above.
10
3. Use a coin to turn the
cover clockwise as far as
it will go to fix it in place.
INSTALLATION
INSTALLATION
If you want to place your TV on top of the SoundStand, please make sure that your TV satisfies the two conditions
below:
- Maximum TV weight : 35 kg
- Maximum TV stand dimension : Smaller than 720 mm X 320 mm
 Fits most TVs up to 1524mm and up to 35kg (*TV screen size and stand type may vary)
+ How to install the SoundStand
Correct installation
Do not place the TV to one side on the
SoundStand
Do not place the SoundStand near the edge of a
TV shelf, table, or entertainment center.
Do not place a TV whose base is bigger than the
SoundStand’s top surface on the SoundStand.
● Do not place the TV to one side on the SoundStand. The TV may tip over and may cause physical injury.
● Make sure to place the SoundStand in the center of the shelf, table, etc., when you install it. Do not place it
near an edge.
● If the TV is bigger than the SoundStand, consider a wall-mounted TV installation or place the SoundStand
on a stable surface.
● Keep the SoundStand at least 5 cm away from the wall when you install it.
+ Using the protection pads
Place the included protective pads on top
of the product and then place the TV
stand on top of them to prevent
scratches on the product’s surface.
11
ENG
SOUNDSTAND INSTALLATION
CONNECTIONS
CONNECTIONS
CONNECTING AN EXTERNAL DEVICE USING AN HDMI
CABLE
HDMI is the standard digital interface for connecting to such devices as a TVs, projectors, DVD players, Blu-ray
players, set top boxes, and more.
HDMI prevents any degradation to the signal due to conversion to analogue and maintains the video and audio
quality of the original digital source.
HDMI IN
HDMI OUT
HDMI Cable
(not supplied)
HDMI Cable
(not supplied)
Digital Devices
HDMI IN
HDMI OUT (ARC)
Connect an HDMI cable (not supplied) from the HDMI IN
jack on the back of the product to the HDMI OUT jack
on your digital device.
The ARC function allows digital audio to output via the
HDMI OUT(ARC) port.
and,
It can be enabled only when the SoundStand is
connected to a TV that supports the ARC function
● ANYNET+ must be turned on.
● This function is not available if the HDMI cable
does not support ARC.
HDMI OUT (HDMI)
Connect an HDMI cable (not supplied) from the HDMI
OUT jack on the back of the product to the HDMI IN
jack on your TV.
● HDMI is an interface that enables the digital
transmission of video and audio data with just
a single connector.
12
CONNECTIONS
CONNECTING AN EXTERNAL DEVICE USING OPTICAL
(DIGITAL) CABLE OR AUDIO (ANALOGUE) CABLE
AUX IN
OPTICAL IN
or
OPTICAL
OUT
BD/ DVD player/
Set-top box/
Game console
AUDIO
OUT
Optical Cable
(not supplied)
Audio Cable
OPTICAL IN
AUX IN
Connect OPTICAL IN on the main unit to the OPTICAL
OUT of the TV or Source Device.
Connect AUX IN (Audio) on the main unit to the AUDIO
OUT of the TV or Source Device.
Be sure to match connector colours.
● Do not connect the power cord of this
product or your TV to the wall outlet until all
connections between components are
complete.
● Before moving or installing this product, be
sure to turn off the power and disconnect the
power cord
or,
13
ENG
This unit comes equipped with one optical in digital jack and one audio analogue in jack, giving you two ways to
connect it to a TV.
FUNCTIONS
FUNCTIONS
INPUT MODE
Press the SOURCE button on the remote control or the (
mode you want.
) button on the product's top panel to select the
SOURCE
POWER
SOURCE
MUTE
VOL
Input mode
Display
Optical Digital input
D.IN
AUX input
AUX
WOOFER
The unit turns off automatically in the following situations.
● D.IN/HDMI/BT/TV/USB/ARC Mode
-
If there is no audio signal for 25 minutes.
● AUX Mode
HDMI input
HDMI
-
If the AUX cable is disconnected for 25 minutes.
BLUETOOTH mode
BT
-
TV mode
TV
USB mode
USB
If there is no KEY input for 8 hours when the AUX
cable is connected. To turn this function ON or
button for 5
OFF, press and hold the
seconds. AUTO POWER DOWN ON / OFF
appears on the display.
ARC (HDMI OUT)
HDMI Cable
● The ARC function allows digital audio to output via the HDMI OUT (ARC) port.
It can be enabled only when the SoundStand is connected to a TV that supports the ARC function.
● ANYNET+ must be turned on.
● This function is not available if the HDMI cable does not support ARC.
● The ARC function is activated in D.IN mode if you have connected the unit to a TV that supports ARC.
● To turn off the ARC function, turn ANYNET+ off.
14
FUNCTIONS
BLUETOOTH
You can use a Bluetooth device to enjoy music with high quality stereo sound, all without wires!
ENG
+ To connect the SoundStand to a Bluetooth device
Check if the Bluetooth device supports the Bluetooth compliant stereo headset function.
Connect
Bluetooth device
1. Press the SOURCE button on the remote control
or the ( ) button on the product's top panel to
display the BT message.
2. Select the Bluetooth menu on the Bluetooth device
you want to connect. (Refer to the Bluetooth device's
user manual.)
3. Select the Stereo headset menu on the Bluetooth
device.
•
You will see a list of scanned devices.
4. Select "[Samsung] SoundStand" from the list.
•
When the SoundStand is connected to the
Bluetooth device, it will display [Bluetooth device
name] ➞ BT on the front display.
•
The device name can only be displayed in
English. An underline " _ " will be displayed if the
name is not in English.
•
If the Bluetooth device has failed to pair with the
SoundStand, delete the previous "[Samsung]
SoundStand" found by the Bluetooth device and
have it search for the SoundStand again.
5. Play music on the connected device.
•
You can listen to the music playing on the
connected Bluetooth device over the
SoundStand.
•
In BT mode, the Play/Pause/Next/Prev functions
are not available. However, these functions are
available in Bluetooth devices supporting AVRCP.
15
● If asked for PIN code when connecting a
Bluetooth device, enter <0000>.
● Only one Bluetooth device can be paired at a
time.
● Bluetooth connection will be terminated when
you turn the SoundStand off.
● The SoundStand may not perform Bluetooth
search or connection correctly under the
following circumstances:
- If there is a strong electrical field around
the SoundStand.
- If several Bluetooth devices are
simultaneously paired with SoundStand.
- If the Bluetooth device is turned off, not in
place, or malfunctions.
- Note that such devices as microwave
ovens, wireless LAN adaptors, fluorescent
lights, and gas stoves use the same
frequency range as the Bluetooth device,
which can cause electric interference.
● The SoundStand supports SBC data
(44.1kHz, 48kHz).
● Connect only to a Bluetooth device that
supports the A2DP (AV) function.
● You cannot connect the SoundStand to a
Bluetooth device that supports only the HF
(Hands Free) function.
FUNCTIONS
+ Bluetooth POWER on (Bluetooth
POWER)
● In Bluetooth connection mode, the Bluetooth
connection will be lost if the distance between
the SoundStand and the Bluetooth device
exceeds 5m.
● If the Bluetooth device comes back into the
effective range after disconnecting, you can
restart the SoundStand to restore the pairing
with the Bluetooth device.
● The SoundStand automatically turns off after
25 minutes in the Ready state.
When the Bluetooth Power On function is on and the
SoundStand is turned off, if a previously paired Bluetooth
device tries to pair with the SoundStand, the
SoundStand turns on automatically.
1. Press the Bluetooth POWER button on the
SoundStand remote control.
2. Bluetooth POWER on appears on the SoundStand's
display.
● Available only if the SoundStand is listed
among the Bluetooth device’s paired devices.
(The Bluetooth device and the SoundStand
must have been previously paired at least
once.)
● SoundStand will appear in the Bluetooth
device’s searched devices list only when the
SoundStand is displaying [BT READY].
● In the TV SoundConnect mode, the
SoundStand cannot be paired to another
Bluetooth device.
● If the SoundStand is connected to a TV
through TV SoundConnect, and you turn the
the SoundStand off by turning off the TV, the
Bluetooth Power function will not turn the
SoundStand on.
+ To disconnect the Bluetooth
device from the SoundStand
You can disconnect the Bluetooth device from the
SoundStand. For instructions, see the Bluetooth device's
user manual.
● The SoundStand will be disconnected.
● When the SoundStand is disconnected from the
Bluetooth device, the SoundStand will display BT
DISCONNECTED on the front display.
+ To disconnect the SoundStand
from the Bluetooth device
Press the SOURCE button on the remote control or
the ( ) button on the product's top panel to switch
from BT to another mode or turn off the SoundStand.
● The connected Bluetooth device will wait a certain
amount of time for a response from the SoundStand
before terminating the connection. (Disconnection
time may differ, depending on the Bluetooth device)
More About Bluetooth
Bluetooth is a technology that enables Bluetoothcompliant devices to interconnect easily with each other
using a short wireless connection.
● A Bluetooth device may cause noise or malfunction,
depending on usage, when:
-
A part of your body is in contact with the
receiving/transmitting system of the Bluetooth
device or the SoundStand.
-
It is subject to electrical variation from
obstructions caused by a wall, corner, or office
partition.
-
It is exposed to electrical interference from same
frequency-band devices including medical
equipment, microwave ovens, and wireless
LANs.
● Pair the SoundStand with the Bluetooth device while
they are close together.
● The further the distance between the SoundStand
and Bluetooth device, the worse the quality is.
If the distance exceeds the Bluetooth operational
range, the connection is lost.
● In poor reception-sensitivity areas, the Bluetooth
connection may not work properly.
● The Bluetooth connection only works when it is close
to the unit. The connection will be automatically cut
off if the Bluetooth device is out of range. Even within
range, the sound quality may be degraded by
obstacles such as walls or doors.
● This wireless device may cause electric interference
during its operation.
16
FUNCTIONS
NFC
+ Connecting with NFC and smart devices
Attach the NFC sticker label on a desired and then approach your smart device to the NFC label.
+ Connecting with NFC
1. Detach the NFC sticker label and attach it to a desired spot.
• Putting the NFC sticker within a 3m radius from the unit is recommanded.
2. Enable the NFC function of your smart device.
3. Bring your smart device’s NFC antenna close to the NFC label.
4. When the connection prompt appears on your smart device’s display, select <Yes>.
• Once the connection is established, the completion message appears.
+ Disconnecting NFC
Bring your smart device’s NFC antenna close to the NFC label on the SoundStand again. The disconnection message
appears on the smart device's display.
+ To connect another smart device to the SoundStand which is already
connected to another NFC compatible device
After disconnecting from the previously connected device, bring the new smart device close to the NFC label of the
SoundStand.
● The NFC function is implemented in Android v4.1.2 Jelly Bean and later operating systems.
- To make NFC connections, your smart device needs both Android OS 4.1.2 Jelly Bean or later and the
NFC tag for NFC function execution. You also need to download the “Samsung NFC Connection”
application from the Google Playstore and install it on your smart device. For further details, please refer
to the smart device’s user manual.
● The location of the NFC antenna is different in different devices. Confirm the location of your smart device’s
antenna in the device's user manual before attempting to pair it with the SoundStand.
● If your smart device is in a thick housing or case, the NFC connection may not be stable.
● The N-mark is a trade mark or registered trade mark of the NFC Forum Inc. in the United States and other
countries.
● If you have trouble with an NFC connection
- Actually touching your smart device to the NFC label can cause NFC connection failure.
- If the “Empty tag” error is displayed on the smart device, please try again.
- Check whether your smart device’s antenna is close enough to the NFC logo on the SoundStand.
● If you turn off the SoundStand when the Bluetooth Power On feature is ON, and then try to connect a
Bluetooth device that has been previously connected using NFC, the SoundStand will turn on automatically
when the device connects.
To set the Bluetooth Power On option, see page 16.
17
ENG
You can connect your SoundStand to an NFC-enabled smart device through a Bluetooth connection with a simple
setup. Once connected, you can enjoy music stored in your smart device through the SoundStand.
FUNCTIONS
TV SOUNDCONNECT
You can enjoy TV sound through your SoundStand connected to a Samsung TV that supports TV SoundConnect
function.
+ Connecting a TV to the SoundStand
Connect
1. Turn on the TV and SoundStand.
• Set the "Add New Device" menu of the TV to "On".
2. Press the ( ) button on the main unit’s top panel or
the SOURCE button on the remote control to select
the TV mode.
3. On the TV, a message asking whether to enable the TV
SoundConnect function. "[Samsung] SoundStand" is
displayed on the TV screen.
4. Select <Yes> to finish connecting the TV and
SoundStand.
● Switching the SoundStand’s mode from TV to
another automatically terminates TV
SoundConnect.
● To connect the SoundStand to another TV, the
existing connection must be terminated.
● Terminate the connection to the existing TV,
button on the remote control
then press the
for 5 seconds to connect to another TV.
● TV SoundConnect Operational Range
- Recommended pairing range: within 50 cm
- Recommended operational range: within
5m
● PLAY, NEXT, PREV and STOP buttons are
not operable in TV SoundConnect mode.
+ Using the Bluetooth POWER On
function
After the TV and the SoundStand have been connected
using TV SoundConnect, if you set the Bluetooth Power
On function on, the SoundStand will turn on and off
automatically when you turn the TV on or off.
1. Connect the TV with your SoundStand using the TV
SoundConnect function.
2. Press the Bluetooth POWER button on the
SoundStand remote. "BLUETOOTH POWER ON"
appears on the SoundStand's display.
● The TV SoundConnect (SoundShare) function is
supported by some Samsung TVs released from
2012 on. Check whether your TV supports the TV
SoundConnect (SoundShare) function before you
begin. (For further information, refer to the TV’s
user manual.)
● If your Samsung TV is released before 2014,
check the SoundShare setting menu.
● If the distance between the TV and
SoundStand exceeds 5m, the connection may
not be stable or the audio may stutter. If this
occurs, relocate the TV or SoundStand so that
they are within operational range, and then
re-establish the TV SoundConnect connection.
18
•
BLUETOOTH POWER ON : The SoundStand
turns on and off when you turn the TV on or off.
•
BLUETOOTH POWER OFF : The SoundStand
only turns off when you turn the TV off.
● This function is supported only by some
Samsung TVs released from 2013 on.
● If the SoundStand is connected to a TV
through TV SoundConnect, and you turn the
SoundStand off by turning off the TV, the
Bluetooth Power function will not turn the
SoundStand on, even if you connect another
Bluetooth device to it.
FUNCTIONS
USB
You can play music files located on USB storage devices.
● Mobile phone devices are not supported.
1. Connect the USB device to the USB port on the
back of the product.
● File Format Type Compatibility list:
2. Press the SOURCE button on the remote control
or the ( ) button on the product's top panel
repeatedly until USB appears.
Format
Codec
MPEG 1 Layer2
3. USB appears on the display screen.
*.mp3
•
The SoundStand connection to the USB device
is complete.
•
The SoundStand automatically turns off (Auto
Power Off) if no USB device has been connected
for more than 25 minutes.
MPEG 1 Layer3
MPEG 2 Layer3
MPEG 2.5 Layer3
*.wma
+ Before you connect a USB device
Be aware of the following:
● If the file name of a file or folder on a USB device
exceeds 10 characters, it is not displayed on the
SoundStand's display.
Wave_Format_MSAudio1
Wave_Format_MSAudio2
AAC
*.aac
AAC-LC
HE-AAC
*.wav
-
*.ogg
OGG 1.1.0
*.flac
FLAC 1.1.0, FLAC 1.2.1
 Supported Sampling Rate above 16KHz
● This product may not be compatible with certain
types of USB storage media.
● The SoundStand supports the FAT16 and FAT32 file
systems.
-
ENG
Display
USB port
The NTFS file system is not supported.
● Connect USB devices directly to the USB port of the
product. Otherwise, you may encounter a USB
compatibility problem.
● Do not connect multiple storage devices to the
product via a multi-card reader. It may not operate
properly.
● Digital camera PTP protocols are not supported.
● Do not remove the USB device while it is being read.
● DRM-protected music files (MP3, WMA) from a
commercial web site cannot be played.
● External HDDs are not supported.
19
FUNCTIONS
SOFTWARE UPGRADE
Samsung may offer upgrades for the SoundStand's
system firmware in the future.
● Insert a USB device containing the firmware
upgrade into the USB port on the main unit.
● Do not disconnect the power or remove the
USB device while upgrades are being
applied. The main unit will turn off
automatically after completing the firmware
upgrade.
When software is upgraded, all settings are
reset to their factory default settings.
We recommend you write down your settings
so that you can easily reset them after the
upgrade.
● Once the software upgrade is completed,
turn off the product and then press and hold
the (►) button for a while to reset the
product.
● If the firmware fails to upgrade, we
recommend formatting the USB device in
FAT16 and trying again.
● Do not format the USB device in the NTFS
format. The SoundStand does not support
the NTFS file system.
● Depending on the manufacturer, some USB
devices may not be supported.
If an upgrade is offered, you can upgrade the firmware
by connecting a USB device with the firmware upgrade
stored on it to the USB port on your SoundStand.
Note that if there are multiple upgrade files, you must
load them onto the USB device singly and use them to
upgrade the firmware one at a time.
Please visit samsung.com or contact the Samsung call
centre to receive more information about downloading
upgrades files.
20
TROUBLESHOOTING
TROUBLESHOOTING
ENG
Before requesting service, please check the following.
The unit will not turn on.
 Connect the power plug to the outlet.
• Is the power cord plugged into the outlet?
A function does not work when the button is pressed.
 Disconnect the power plug and connect it again.
• Is there static electricity in the aerial?
Sound is not produced.
• Is the Mute function on?
 Press the Mute button to cancel the function.
• Is the volume set to minimum?
 Adjust the volume .
The remote control does not work.
• Are the batteries drained?
 Replace with new batteries.
• Is the distance between the remote control and main
unit too far?
 Move closer to the unit.
The TV SoundConnect (TV pairing) failed.
• Does your TV support TV SoundConnect?
 TV SoundConnect is supported by some Samsung
TVs released after 2012. Check your TV to see if it
supports TV SoundConnect.
• Is your TV firmware the latest version?
 Update your TV with the latest firmware.
• Does an error occur when connecting?
 Contact the Samsung call centre.
• Reset the TV MODE and connect again.
 Press and hold the ► button for 5 seconds to reset
the TV SoundConnect connection.
21
APPENDIX
APPENDIX
SPECIFICATIONS
Model name
GENERAL
AMPLIFIER
HW-H600
USB
5V/0.5A
Weight
5 kg
Dimensions (W x H x D)
735 x 36.5 x 360 mm
Operating temperature range
+5°C ~ +35°C
Operating humidity range
10 % to 75 %
Rated output power
80 W(MID/TWT = 8 OHM, SW = 4 OHM)
THD = 10 %, 1 kHz
S/N ratio (analogue input)
65 dB
Separation (1kHz)
65 dB
*
S/N ratio, distortion, separation, and usable sensitivity are based on measurements using AES (Audio Engineering
Society) guidelines.
*
Nominal specification
-
Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
-
Weight and dimensions are approximate.
-
For the power supply and Power Consumption, refer to the label attached to the product.
LICENSE
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the
Symbol, & DTS and the Symbol together are registered trademarks, and DTS 2.0 Channel is a trademark of DTS, Inc.
© DTS, Inc. All Rights Reserved.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and other countries.
- To send inquiries and requests regarding open sources, contact Samsung via Email (oss.request@samsung.com).
As an ENERGY STAR Partner, Samsung
has determined that this product or
product models meets the ENERGY STAR
guidelines for energy efficiency.
22
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care
Centre.
Contact Centre 
Area
` Asia Pacific
AUSTRALIA
NEW ZEALAND
CHINA
1300 362 603
0800 SAMSUNG (0800 726 786)
400-810-5858
HONG KONG
(852) 3698 4698
INDIA
INDONESIA
JAPAN
MALAYSIA
PHILIPPINES
SINGAPORE
THAILAND
TAIWAN
VIETNAM
` MENA
U.A.E
OMAN
KUWAIT
BAHRAIN
QATAR
EGYPT
ALGERIA
PAKISTAN
TUNISIA
JORDAN
SYRIA
IRAN
MOROCCO
1800 3000 8282 - Toll Free
1800 266 8282 - Toll Free
30308282 - Non Toll Free
0800112888
021-56997777
0120-327-527
1800-88-9999
1-800-10-7267864 [PLDT]
1-800-8-7267864 [Globe landline and Mobile]
02-4222111 [Other landline]
1800-SAMSUNG (726-7864)
0-2689-3232,
1800-29-3232
0800-32-9999
1800 588 889
800-SAMSUNG (726-7864)
800-SAMSUNG (726-7864)
183-2255 (183-CALL)
8000-4726
800-2255 (800-CALL)
08000-726786
16580
021 36 11 00
0800-Samsung (72678)
80-1000-12
0800-22273
06 5777444
18252273
021-8255
080 100 2255
SAUDI ARABIA
920021230
TURKEY
` Africa
NIGERIA
444 77 11
Ghana
Cote D’ Ivoire
SENEGAL
CAMEROON
KENYA
UGANDA
TANZANIA
RWANDA
BURUNDI
DRC
SUDAN
SOUTH AFRICA
BOTSWANA
NAMIBIA
ZAMBIA
MOZAMBIQUE
0800-726-7864
0800-10077
0302-200077
8000 0077
800-00-0077
7095- 0077
0800 545 545
0800 300 300
0685 88 99 00
9999
200
499999
1969
0860 SAMSUNG (726 7864)
8007260000
08 197 267 864
0211 350370
847267864 / 827267864
Web Site
www.samsung.com/au/support
www.samsung.com/nz/support
www.samsung.com/cn/support
www.samsung.com/hk/support (Chinese)
www.samsung.com/hk_en/support (English)
www.samsung.com/in/support
www.samsung.com/id/support
www.samsung.com/jp/support
www.samsung.com/my/support
www.samsung.com/ph/support
www.samsung.com/sg/support
www.samsung.com/th/support
www.samsung.com/tw/support
www.samsung.com/vn/support
www.samsung.com/ae/support (English)
www.samsung.com/ae_ar/support (Arabic)
www.samsung.com/eg/support
www.samsung.com/n_africa/support
www.samsung.com/pk/support
www.samsung.com/n_africa/support
www.samsung.com/Levant/support (English)
www.samsung.com/Levant/support (English)
www.samsung.com/iran/support
www.samsung.com/n_africa/support
www.samsung.com/sa/support
www.samsung.com/sa_en/support (English)
www.samsung.com/tr/support
www.samsung.com/africa_en/support
www.samsung.com/africa_fr/support
www.samsung.com/support
www.samsung.com/support
AH68-02697N-00