Yamaha MCR E810SL - DVD Player / AV Receiver Owner`s manual

MCR-E810_UCA_cv.fm Page 1 Thursday, July 20, 2006 5:48 PM
UCA
RECEIVER/DVD PLAYER
AMPLI-TUNER/LECTEUR DE DVD
© 2006
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND
YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
All rights reserved.
Printed in China
WH45450
OWNER'S MANUAL
MODE D'EMPLOI
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
10
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
•
Explanation of Graphical Symbols
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert you to the
presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle
is intended to alert you to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
1
2
3
4
5
6
7
8
9
i
11
Read Instructions – All the safety and operating instructions
should be read before the product is operated.
Retain Instructions – The safety and operating instructions
should be retained for future reference.
Heed Warnings – All warnings on the product and in the
operating instructions should be adhered to.
Follow Instructions – All operating and use instructions
should be followed.
Cleaning – Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners.
Attachments – Do not use attachments not recommended by
the product manufacturer as they may cause hazards.
Water and Moisture – Do not use this product near water –
for example, near a bath tub, wash bowl, kitchen sink, or
laundry tub; in a wet basement; or near a swimming pool;
and the like.
Accessories – Do not place this product on an unstable cart,
stand, tripod, bracket, or table. The product may fall,
causing serious injury to a child or adult, and serious
damage to the product. Use only with a cart, stand, tripod,
bracket, or table recommended by the manufacturer, or sold
with the product. Any mounting of the product should
follow the manufacturer’s instructions, and should use a
mounting accessory recommended by the manufacturer.
A product and cart combination should be moved with care.
Quick stops, excessive force, and uneven surfaces may
cause the product and cart combination to
overturn.
12
13
14
15
16
17
18
19
Ventilation – Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of the
product and to protect it from overheating, and these
openings must not be blocked or covered. The openings
should never be blocked by placing the product on a bed,
sofa, rug, or other similar surface. This product should not
be placed in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer’s
instructions have been adhered to.
Power Sources – This product should be operated only from
the type of power source indicated on the marking label. If
you are not sure of the type of power supply to your home,
consult your product dealer or local power company. For
products intended to operate from battery power, or other
sources, refer to the operating instructions.
Grounding or Polarization – This product may be equipped
with a polarized alternating current line plug (a plug having
one blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit, contact
your electrician to replace your obsolete outlet. Do not
defeat the safety purpose of the polarized plug.
Power-Cord Protection – Power-supply cords should be
routed so that they are not likely to be walked on or pinched
by items placed upon or against them, paying particular
attention to cords at plugs, convenience receptacles, and the
point where they exit from the product.
Lightning – For added protection for this product during a
lightning storm, or when it is left unattended and unused for
long periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prevent
damage to the product due to lightning and power-line
surges.
Power Lines – An outside antenna system should not be
located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into such
power lines or circuits. When installing an outside antenna
system, extreme care should be taken to keep from touching
such power lines or circuits as contact with them might be
fatal.
Overloading – Do not overload wall outlets, extension
cords, or integral convenience receptacles as this can result
in a risk of fire or electric shock.
Object and Liquid Entry – Never push objects of any kind
into this product through openings as they may touch
dangerous voltage points or short-out parts that could result
in a fire or electric shock. Never spill liquid of any kind on
the product.
Servicing – Do not attempt to service this product yourself
as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to
qualified service personnel.
Damage Requiring Service – Unplug this product from the
wall outlet and refer servicing to qualified service personnel
under the following conditions:
a) When the power-supply cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the
product,
c) If the product has been exposed to rain or water,
IMPORTANT SAFETY INSTRUCTIONS
d)
20
21
22
23
If the product does not operate normally by following
the operating instructions. Adjust only those controls
that are covered by the operating instructions as an
improper adjustment of other controls may result in
damage and will often require extensive work by a
qualified technician to restore the product to its normal
operation,
e) If the product has been dropped or damaged in any
way, and
f)
When the product exhibits a distinct change in
performance - this indicates a need for service.
Replacement Parts – When replacement parts are required,
be sure the service technician has used replacement parts
specified by the manufacturer or have the same
characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other
hazards.
Safety Check – Upon completion of any service or repairs to
this product, ask the service technician to perform safety
checks to determine that the product is in proper operating
condition.
Wall or Ceiling Mounting – The unit should be mounted
to a wall or ceiling only as recommended by the
manufacturer.
Heat – The product should be situated away from heat
sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
24
Outdoor Antenna Grounding – If an outside antenna or
cable system is connected to the product, be sure the antenna
or cable system is grounded so as to provide some
protection against voltage surges and built-up static charges.
Article 810 of the National Electrical Code, ANSI/NFPA 70,
provides information with regard to proper grounding of the
mast and supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode.
EXAMPLE OF ANTENNA GROUNDING
MAST
ANTENNA
LEAD IN
WIRE
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810–20)
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810–21)
GROUND CLAMPS
Note to CATV system installer:
This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be
connected to the grounding system of the building, as
close to the point of cable entry as practical.
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250. PART H)
NEC – NATIONAL ELECTRICAL CODE
FCC INFORMATION (for US customers)
1 IMPORTANT NOTICE: DO NOT MODIFY THIS
UNIT!
This product, when installed as indicated in the
instructions contained in this manual, meets FCC
requirements. Modifications not expressly approved by
Yamaha may void your authority, granted by the FCC, to
use the product.
2 IMPORTANT: When connecting this product to
accessories and/or another product use only high quality
shielded cables. Cable/s supplied with this product MUST
be used. Follow all installation instructions. Failure to
follow instructions could void your FCC authorization to
use this product in the USA.
3 NOTE: This product has been tested and found to comply
with the requirements listed in FCC Regulations, Part 15
for Class “B” digital devices. Compliance with these
requirements provides a reasonable level of assurance that
your use of this product in a residential environment will
not result in harmful interference with other electronic
devices.
This equipment generates/uses radio frequencies and, if
not installed and used according to the instructions found
in the users manual, may cause interference harmful to the
operation of other electronic devices.
Compliance with FCC regulations does not guarantee that
interference will not occur in all installations. If this
product is found to be the source of interference, which
can be determined by turning the unit “OFF” and “ON”,
please try to eliminate the problem by using one of the
following measures:
Relocate either this product or the device that is being
affected by the interference.
Utilize power outlets that are on different branch (circuit
breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient
the antenna. If the antenna lead-in is 300 ohm ribbon lead,
change the lead-in to coaxial type cable.
If these corrective measures do not produce satisfactory
results, please contact the local retailer authorized to
distribute this type of product. If you can not locate the
appropriate retailer, please contact Yamaha Electronics
Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA
90620.
The above statements apply ONLY to those products
distributed by Yamaha Corporation of America or its
subsidiaries.
ii
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
Install this unit (RX-E810 and DVD-E810) in a well ventilated,
cool, dry, clean place with at least 10 cm on the top (2.5 cm for
DVD-E810), 10 cm on the left and right, and 10 cm at the back of
this unit — away from direct sunlight, heat sources, vibration,
dust, moisture, and/or cold.
Locate this unit away from other electrical appliances, motors, or
transformers to avoid humming sounds.
Do not expose this unit to sudden temperature changes from cold
to hot, and do not locate this unit in an environment with high
humidity (i.e. a room with a humidifier) to prevent condensation
inside this unit, which may cause an electrical shock, fire,
damage to this unit, and/or personal injury.
Avoid installing this unit where foreign object may fall onto this
unit and/or this unit may be exposed to liquid dripping or
splashing. On the top of this unit, do not place:
– Other components, as they may cause damage and/or
discoloration on the surface of this unit.
– Burning objects (i.e. candles), as they may cause fire, damage
to this unit, and/or personal injury.
– Containers with liquid in them, as they may fall and liquid
may cause electrical shock to the user and/or damage to this
unit.
Do not cover this unit with a newspaper, tablecloth, curtain, etc.
in order not to obstruct heat radiation. If the temperature inside
this unit rises, it may cause fire, damage to this unit, and/or
personal injury.
Do not plug in this unit to a wall outlet until all connections are
complete.
Do not operate this unit upside-down. It may overheat, possibly
causing damage.
Do not use force on switches, knobs and/or cords.
When disconnecting the power cable from the wall outlet, grasp
the plug; do not pull the cable.
Do not clean this unit with chemical solvents; this might damage
the finish. Use a clean, dry cloth.
Only voltage specified on this unit must be used. Using this unit
with a higher voltage than specified is dangerous and may cause
fire, damage to this unit, and/or personal injury. YAMAHA will
not be held responsible for any damage resulting from use of this
unit with a voltage other than specified.
Do not attempt to modify or fix this unit. Contact qualified
YAMAHA service personnel when any service is needed.
The cabinet should never be opened for any reasons.
When not planning to use this unit for long periods of time (i.e.
vacation), disconnect the AC power plug from the wall outlet.
Be sure to read the “Troubleshooting” section on common
operating errors before concluding that this unit is faulty.
16 Before moving this unit, press STANDBY/ON to set this unit in
standby mode, and disconnect the AC power plug from the wall
outlet.
17 Condensation will form when the surrounding temperature
changes suddenly. Disconnect the power cable from the outlet,
then leave the unit alone.
18 When using the unit for a long time, the unit may become warm.
Turn the power off, then leave the unit alone for cooling.
19 Install this unit near the wall outlet and where the AC power plug
can be reached easily.
DANGER
When this unit is plugged to the wall outlet, do not place your
eyes close to the opening of the disc tray and other openings to
look into inside.
This unit is not disconnected from the AC power source as
long as it is connected to the wall outlet, even if this unit itself
is turned off. This state is called the standby mode. In this
state, this unit is designed to consume a very small quantity of
power.
The laser component in this product is capable of emitting
radiation exceeding the limit for Class 1.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
FOR CANADIAN CUSTOMERS
To prevent electric shock, match wide blade of plug to wide
slot and fully insert.
This Class B digital apparatus complies with Canadian
ICES-003.
IMPORTANT
Please record the serial number of this unit in the space
below.
MODEL:
Serial No.:
The serial number is located on the rear of the unit.
Retain this Owner’s Manual in a safe place for future
reference.
We Want You Listening For A Lifetime
YAMAHA and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your
equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or
distortion – and, most importantly, without affecting your sensitive hearing. Since hearing damage from loud sounds is
often undetectable until it is too late, YAMAHA and the Electronic Industries Association’s Consumer Electronics Group
recommend you to avoid prolonged exposure from excessive volume levels.
iii
Contents
Features .................................................................. 2
Supplied Accessories ............................................. 2
Controls and Functions ......................................... 3
Receiver (RX-E810) .................................................. 3
DVD player (DVD-E810).......................................... 6
Remote control........................................................... 8
TUNER OPERATIONS
FM/AM Tuning .................................................... 37
Automatic tuning ..................................................... 37
Manual tuning.......................................................... 37
Automatic preset tuning........................................... 38
Manual preset tuning ............................................... 39
Selecting preset stations........................................... 39
PREPARATION
Connecting the System ........................................ 12
Connecting a TV .................................................. 14
Connecting Antennas .......................................... 15
Connecting the AM loop antenna ............................ 15
Connecting the FM antenna..................................... 15
Connecting External Components ..................... 16
Connecting the Power Cables............................. 18
Setting the System................................................ 19
Setting the Timer.................................................. 43
Setting the clock timer ............................................. 43
Setting the sleep timer ............................................. 44
Setting the auto-standby mode............................ 45
Controlling External Components...................... 46
Available operations ................................................ 46
Setting remote control codes ................................... 48
Using iPod ............................................................... 49
Configuring the DVD Player Settings
(Setup Menu) .................................................... 51
Setup menu items..................................................... 52
Resetting the DVD player settings .......................... 56
ADDITIONAL INFORMATION
BASIC OPERATIONS
Basic Receiver Operations .................................. 22
Changing the front panel display settings................ 23
Supported Disc Types.......................................... 24
Basic Disc Playback Operations......................... 25
Receiver (RX-E810) ................................................ 58
DVD player (DVD-E810)........................................ 61
Remote control ........................................................ 62
Notes on Discs ....................................................... 63
Disc information ...................................................... 63
Handling a disc ........................................................ 64
Glossary................................................................. 65
Audio information ................................................... 65
Video information.................................................... 66
Copyright and logo marks ....................................... 66
Specifications ........................................................ 67
OTHER
OPERATIONS
ADDITIONAL
INFORMATION
Repeating disc playback (Repeat Play) ................... 26
Playing back randomly (Shuffle Play)..................... 26
Specifying an elapsed time for playback
(Time Search) ...................................................... 27
Specifying a preview picture for playback
(Scan Search)....................................................... 28
Customizing playback order (Program Play) .......... 29
Selecting audio and subtitle languages/
audio channel settings. ........................................ 30
Zooming the picture................................................. 30
Selecting a viewing angle ........................................ 31
Operating the disc menu .......................................... 31
Playing back MP3/WMA/JPEG/DivX discs ........... 32
Viewing or changing playback settings on the TV
(OSD menu) ........................................................ 34
Language Codes ................................................... 57
Troubleshooting.................................................... 58
TUNER
OPERATIONS
Step 1: Turn on the power and select
the DVD input ..................................................... 19
Step 2: Adjust the clock........................................... 19
Step 3: Set the aspect ratio....................................... 20
Step 4: Set the OSD language.................................. 20
Step 5: Set the the default audio, subtitle,
and disc menu languages ..................................... 21
OTHER OPERATIONS
BASIC
OPERATIONS
Connecting an MD player or a tape deck ................ 16
Connecting an MD recorder or a CD recorder ........ 16
Connecting a YAMAHA iPod universal dock ........ 17
Selecting the Radio Data System program .............. 40
Displaying the Radio Data System information ...... 41
PREPARATION
Radio Data System Tuning
(U.K. and Europe Models Only) ..................... 40
INTRODUCTION
INTRODUCTION
Restricting Disc Playback ................................... 35
Setting the parental control level ............................. 35
Locking a disc.......................................................... 36
Changing the password............................................ 36
English
1 En
FEATURES
Features
Receiver (RX-E810)
• Maximum RMS output power per channel
65W + 65W (6 Ω, 1 kHz, 1%THD)
• 40-station FM/AM preset tuning
• iPod dock terminal
• Pure Direct mode
DVD player (DVD-E810)
• Plays DVDs, Video CDs, Audio CDs, MP3 CDs,
WMA CDs, DivX CDs and JPEG CDs.
• Progressive-scan video output
• Optical and coaxial digital output jacks
■ About this manual
• In this manual, “RX-E810” is described as “receiver” and “DVD-E810” is described as “DVD player”.
• This manual describes how to operate the system using a remote control except when it is not available. Some of these operations are
also available using the front panel buttons.
• Remote control descriptions and illustrations in this manual are based on the U.K. and Europe models unless otherwise specified.
• y indicates a tip for your operation.
• Notes contain important information about safety and operating instructions.
• This manual is printed prior to production. Design and specifications are subject to change in part as a result of improvements, etc. In
case of differences between the manual and the product, the product has priority.
Supplied Accessories
This product includes the following accessories. Before connecting this system, make sure you received all of the following parts.
Remote
control
STANDBY/ON
Batteries (x2)
(AA, R06, UM-3)
System control
cable (0.6 m)
Indoor FM antenna
(U.S.A., Canada, China, Taiwan,
and Asia models)
Indoor FM antenna
(U.K., Europe, Australia,
and Korea models)
AM loop antenna
Video pin
cable (1.5 m)
POWER
TV
1
2
3
4
5
6
7
8
SCAN
DIMMER
9
0
REPEAT
TV CH
A-B
FREQ/TEXT
PROG
MODE
PTY SEEK
TV INPUT
ON SCREEN
START
SHUFFLE
PRESET
MENU
INFO.
A-E
ENTER
A-E
TOP MENU
/RETURN
SET UP
TV VOL
VOLUME
DISPLAY
SLEEP
DVD/CD
TUNER
BAND
TAPE/MD
AUX/TV
DOCK
SUBTITLE ANGLE
ZOOM
AUDIO
Audio pin
cable (1.5 m)
2 En
Controls and Functions
INTRODUCTION
Receiver (RX-E810)
■ Front panel
1 2
3 45
6
7
8
9
NATURAL SOUND STEREO RECEIVER RX-E810
PURE DIRECT
DISPLAY
TIMER
MEMORY
AUTO/MAN'L
TIME ADJ
TIMER
PRESET/BAND
PRESET/TUNING
VOLUME
BASS
STANDBY/ON
TREBLE
HOUR
MIN
INPUT
BALANCE
PHONES
L
R
MIN
0 A
B
C
D
E
MAX
F
1 STANDBY/ON
Turns the receiver on or sets it to the standby mode (see
page 19).
8 PRESET/TUNING d / u (HOUR, MIN)
Selects a tuning frequency when tuner is selected as an
input source.
2 Remote control sensor
Receives signals from the remote control.
9 PURE DIRECT
Turns on or off the Pure Direct mode (see page 22).
3 DISPLAY
Switches the information shown in the front panel display
(see page 23).
0 TIMER LED
Lights up when the clock timer is on (see page 43).
4 Front panel display
Shows the various infomaiton such as the clock time or the
tuning frequency.
A PHONES
Outputs audio signals for private listening with headphones.
B BASS
Adjusts the low frequency responce (see page 22).
5 MEMORY (TIME ADJ)
• Stores a preset station in the memory. Hold down this
key for more than 2 seconds to preset radio stations
automatically (see page 38).
• Sets the clock before using the timer function (see
page 19).
C TREBLE
Adjusts the high frequency responce (see page 22).
6 AUTO/MAN’L (TIMER)
• Switches between Auto Tuning mode and Manual Tuning
mode when tuner is selected as an input source (see
page 37).
• Turns the clock timer function on or off (see page 43).
E INPUT
Selects an input source.
D BALANCE
Adjusts the volume level of each left and right speaker
channel (see page 22).
F VOLUME
Adjusts the volume level.
English
7 PRESET/BAND
Switches between FM, AM, and the preset mode when
tuner is selected as an input source.
3 En
Controls and Functions
■ Rear panel
1
2
3
ANTENNA
75
UNBAL.
SPEAKERS
(Europe model)
MAINS
6 MIN / SPEAKER
DOCK
FM
DVD/CD
AC OUTLETS
SWITCHED
R
L
GND
IN
OUT
TAPE/MD
AM
SUBWOOFER
OUT
TO DVD-E810
100W MAX. TOTAL
AUX
R
4
5
L
6
1 DOCK terminal
Use to connect a YAMAHA iPod universal dock (such as
YDS-10 sold separately) where your iPod can be stationed
(see page 17).
2 Antenna terminals
See page 15 for connection information.
3 Speaker terminals
See page 13 for connection information.
4 DVD/CD jacks
See page 12 for connection information.
5 TAPE/MD IN/OUT jacks
See page 16 for connection information.
4 En
7
8
9
6 AUX jacks
Use to connect the external components.
7 SUBWOOFER OUT jack
Use to connect the subwoofer.
8 System connector (TO DVD-E810) jack
See page 12 for connection information.
9 AC OUTLET(S)
See page 18 for connection information.
Controls and Functions
■ Front panel display
2
3
4
SLEEP PRESET STEREO AUTO
TIMER
TUNED MEMORY
5
6
7
8
INTRODUCTION
1
DOCK SHUFFLE REPEAT PS PTY RT CT PTY HOLD
PLAYLISTS ARTISTS ALBUMS SONGS GENRES
D
9
0
A
B
1 SLEEP indicator
Lights up when the sleep timer is on (see page 44).
2 PRESET indicator
Lights up when you preset radio stations manually (see
page 39).
3 STEREO indicator
Lights up when the receiver is receiving a strong signal
from an FM stereo broadcast.
4 AUTO indicator
Lights up when the receiver is in the Auto Tuning mode
(see page 38).
5 DOCK indicator
Lights up when you station your iPod in a YAMAHA iPod
universal dock (such as YDS-10 sold separately)
connected to the DOCK terminal of the receiver (see
page 17).
C
9 Multi-information display
Shows the various infomaiton such as the clock time or the
tuning frequency.
0 TIMER indicator
Flashes when the the receiver is in the clock timer setting
mode (see page 43).
A TUNED indicator
Lights up when the receiver is tuned into a station.
B MEMORY indicator
Lights up or flashes when you preset radio stations.
C iPod menu indicators
Light up the iPod menu currently selected (see page 49).
D iPod operation indicators
Show operable cursor keys when operating the iPod menu
with the menu browse mode (see page 49).
6 SHUFFLE indicator
Lights up when you set your iPod in shuffle mode.
7 REPEAT indicator
Lights up when you set your iPod in repeat mode.
8 Radio Data System indicators
(U.K. and Europe models only)
The name of the Radio Data System data offered by the
currently received Radio Data System station lights up.
PTY HOLD indicator
Lights up when the receiver is seaching for the Radio Data
System stations in the PTY SEEK mode (see page 40).
English
5 En
Controls and Functions
DVD player (DVD-E810)
■ Front panel
2
1
NATURAL SOUND DVD PLAYER
3
4
DVD-E810
STANDBY/ON
PROGRESSIVE
5
6
7
8
9
0
1 Disc tray
Holds a disc to be played back.
6 PROGRESSIVE indicator
Lights up when the progressive scan mode is on (see
page 54).
2
Opens and closes the disc tray.
7 Front panel display
Shows the current status of the DVD player.
3 s
Stops playback (see page 25).
8 Remote control sensor
Receives signals from the remote control.
4 h/e
Starts or pauses playback (see page 25).
9 b/w
Skips to the begining of the current chapter/track. Press
and hold to fast reverse (see page 25).
5 STANDBY/ON
Turns the DVD player on or sets it to the standby mode
(see page 22).
6 En
0 f/a
Skips to the next chapter/track. Press and hold to fast
forward (see page 25).
Controls and Functions
■ Rear panel
1 (U.K. and Europe models only)
INTRODUCTION
AV
MAINS
VIDEO OUT
COMPONENT
PR
DIGITAL OUT
AUDIO
OUT
L
Y
COAXIAL
OPTICAL
TO RX-E810
S VIDEO
2
VIDEO
3
R
PB
4
5
6
7 8
1 AV terminal (U.K. and Europe models only)
See page 14 for connection information.
5 COAXIAL jack
See page 16 for connection information.
2 S VIDEO jack
See page 14 for connection information.
6 OPTICAL jack
See page 16 for connection information.
3 VIDEO jack
See page 14 for connection information.
7 AUDIO OUT jacks
See page 12 for connection information.
4 COMPONENT jacks
See page 14 for connection information.
8 System connector (TO RX-E810) jack
See page 12 for connection information.
English
7 En
Controls and Functions
Remote control
DVD/CD
• Playback
• Subtitle and
audio language
selection, etc.
TUNER
• Radio station
tuning
• Radio station
preset, etc.
DVD/CD mode
TUNER mode
STANDBY/ON
This remote control has two main operation modes to
control this system. Before operating functions in each
mode, you need to select a mode to change the remote
control key assignments.
To switch the operation mode
• DVD/CD mode: Press DVD/CD.
• TUNER mode: Press TUNER.
y
POWER
TV
1
2
3
4
5
6
7
8
SCAN
DIMMER
9
0
You can also operate the TV and other components (such as an
iPod) connected to the receiver using the remote control. For
details, see “Controlling External Components” on page 46.
Note
SLEEP
DVD/CD
DVD/CD
TUNER
BAND
TAPE/MD
AUX/TV
DOCK
SUBTITLE ANGLE
ZOOM
TUNER
AUDIO
Operations common to all modes
■ Common functions
The following operations are available for the receiver
when the remote control is in any operation modes.
1
STANDBY/ON
1 Infrared signal transmitter
Sends signals to the component you want to control.
POWER
2
TV
1
2
3
5
6
9
0
7
8
SCAN
DIMMER
TV CH
2 STANDBY/ON (
)
Turns the receiver on or sets it to the standby mode (see
page 19).
4
5
A-B
REPEAT
FREQ/TEXT
PROG
MODE
PTY SEEK
TV INPUT
ON SCREEN
PRESET
A-E
ENTER
4 SLEEP
Sets the sleep timer on the receiver (see page 44).
MENU
5 DIMMER
Changes the brightness of the receiver’s front panel
display (see page 23).
A-E
TOP MENU
/RETURN
SET UP
TV VOL
VOLUME
3
DISPLAY
4
SLEEP
6
DVD/CD
TUNER
BAND
TAPE/MD
AUX/TV
DOCK
SUBTITLE ANGLE
ZOOM
3 DISPLAY
Switches the information shown in the front panel display
(see page 23).
START
SHUFFLE
INFO.
8 En
Remote control descriptions and illustrations in this manual are
based on the U.K. and Europe models unless otherwise specified.
AUDIO
7
6 VOLUME +/–
Adjusts the overall volume level on the receiver.
7 Input selection keys
Select the input source on the receiver.
y
STANDBY/ON, DIMMER and SLEEP operations also control
the DVD player when the DVD player is connected to the
receiver with the supplied system control cable (see page 12).
Controls and Functions
■ DVD/CD mode
7 SET UP
Displays the setup menu on the TV screen (see page 51).
8 SUBTITLE
Selects the subtitle language (see page 30).
POWER
TV
1
2
5
6
9
1
2
3
4
5
6
3
4
7
8
SCAN
DIMMER
0
A-B
REPEAT
TV CH
FREQ/TEXT
PROG
MODE
PTY SEEK
TV INPUT
ON SCREEN
START
SHUFFLE
PRESET
MENU
0
9 ANGLE
Selects a viewing angle (see page 31).
A
B
0 Number keys (1 to 9, 0)
Input numerals to specify parameters or chapter/track
numbers.
C
D
E
INFO.
A-E
7
ENTER
A-E
TOP MENU
/RETURN
SET UP
TV VOL
F
VOLUME
DISPLAY
G
SLEEP
8
9
DVD/CD
TUNER
BAND
TAPE/MD
AUX/TV
DOCK
SUBTITLE ANGLE
ZOOM
AUDIO
INTRODUCTION
STANDBY/ON
A SCAN
Previews the content of a DVD or VCD (see page 28) or
plays back the first few seconds of each track on a CD (see
page 25).
B A-B
Repeats a specified section within a chapter/track (see
page 26).
C PROG
Displays the program list used for the Program Play
feature (see page 29).
D SHUFFLE
Turns on/off the Shuffle Play feature (see page 26).
H
I
Operations available in DVD/CD mode
The following operations are available for the DVD
player.
y
Press DVD/CD to set the remote control to the DVD/CD mode
before carrying out the following operations.
1 REPEAT
Selects the Repeat Play mode (see page 26).
2 s
Stops playback (see page 25).
3 e
Pauses playback (see page 25).
E MENU
Displays the DVD menu (see page 31) or PBC menu of a
VCD (see page 31).
F TOP MENU/RETURN
Returns to the top of the DVD menu (see page 31) or to
the previous PBC menu (see page 31). Press and hold to
return to the previous DVD menu.
G Cursor keys (
/
/
/ ), ENTER
Selects an item in the menu screen or specify the selected
parameter.
H AUDIO
Selects the audio language (see page 30).
I ZOOM
Zooms in a specified part of picture (see page 30).
4 h
Starts playback (see page 25).
5 b, a
Skips to the beginning of the current chapter/track or next
chapter/track. Press and hold to fast reverse or fast forward
(see page 25).
English
6 ON SCREEN (INFO.)
Displays the OSD menu on the TV screen or switches the
time display of CDs (see page 34).
9 En
Controls and Functions
■ TUNER mode
Operations available in TUNER mode
The following operations are available for the receiver.
y
STANDBY/ON
Press TUNER to set the remote contol to the TUNER mode
before carrying out the following operations.
POWER
TV
1
2
3
4
5
6
7
8
SCAN
DIMMER
9
0
FREQ/TEXT
PROG
MODE
PTY SEEK
TV INPUT
ON SCREEN
1 Number keys (1 to 8)
Selects preset station number (see page 39).
2 Radio Data System tuning keys
(U.K. and Europe models only)
A-B
REPEAT
TV CH
1
START
2
SHUFFLE
PRESET
MENU
FREQ/TEXT
Switches the Radio Data System display between the
PS mode, PTY mode, RT mode, CT mode (if the
station offers the corresponding data services) and the
frequency display (see page 41).
INFO.
A-E
ENTER
PTY SEEK MODE
Sets the receiver to the PTY SEEK mode (see
page 40).
A-E
TOP MENU
/RETURN
SET UP
TV VOL
VOLUME
DISPLAY
3
SLEEP
DVD/CD
TUNER
BAND
TAPE/MD
AUX/TV
DOCK
SUBTITLE ANGLE
ZOOM
AUDIO
4
PTY SEEK START
Starts searching for a station once the desired
program type is selected in the PTY SEEK mode (see
page 40).
3 A-E
/ , PRESET
/
Press A-E / to select a preset station group (A to E)
and PRESET
/
to select a preset station number
(1 to 8) (see page 39).
4 BAND
Switches the radio reception mode between FM, AM and
the preset mode.
10 En
Controls and Functions
■ Installing the batteries in the remote
control
■ Using the remote control
NATURAL SOUND STEREO RECEIVER RX-E810
PURE DIRECT
Press
DISPLAY
TIMER
MEMORY
AUTO/MAN'L
TIME ADJ
TIMER
PRESET/BAND
PRESET/TUNING
VOLUME
BASS
STANDBY/ON
TREBLE
HOUR
MIN
INPUT
BALANCE
PHONES
Within 6 m
(20 feet)
L
MIN
30˚
1
Press the
mark on the battery cover and
open the cover.
2
Insert the two supplied batteries (AA, R06,
UM-3) into the battery compartment.
Make sure you insert the batteries according to the
polarity markings (+ and –).
3
Close the battery cover.
R
MAX
INTRODUCTION
Use the remote control within 6 m (20 feet) of the
component you want to control and point it toward its
remote control sensor (see pages 3 and 6).
30˚
Notes
• Be careful not to spill liquid on the remote control.
• Be careful not to drop the remote control.
• Do not leave the remote control in the following places:
– hot or humid places, such as near a heater or in a bathroom
– extremely cold places
– dusty places
Notes
• Do not use an old battery together with new one.
• Do not use different types of batteries (for example, alkaline
and manganese) together. Each type of battery has its own
characteristics even if they are similar in shape.
• If the batteries run out, immediately remove them from the
remote control to prevent an explosion or acid leak.
• Dispose of the batteries according to the regional regulations.
• If a battery starts leaking, dispose of it immediately. Be careful
not to let leaking battery acid come into contact with your skin
or clothing. Before inserting new batteries, wipe the
compartment clean.
• Replace the batteries within two minutes to preserve the
memory in the remote control.
English
11 En
CONNECTING THE SYSTEM
Connecting the System
Make sure you read the following procedure and notes carefully before connecting the system. For information on the
speakers (NX-E800), refer to the owner’s manual supplied with it.
Note
Do not connect the power cable of the receiver, DVD player, or other components to the wall outlet until all cable connections are
completed.
Right speaker
(NX-E800)
Left speaker
(NX-E800)
3
3
MAINS
ANTENNA
75
UNBAL.
SPEAKERS
6 MIN / SPEAKER
DOCK
FM
DVD/CD
AC OUTLETS
SWITCHED
R
L
GND
IN
OUT
TAPE/MD
AM
SUBWOOFER
OUT
TO DVD-E810
100W MAX. TOTAL
AUX
R
L
Receiver (RX-E810)
(Europe model)
1
2
AV
MAINS
VIDEO OUT
COMPONENT
PR
DIGITAL OUT
AUDIO
OUT
L
Y
COAXIAL
OPTICAL
TO RX-E810
S VIDEO
VIDEO
PB
R
DVD player (DVD-E810)
1 Connect the DVD/CD (L/R) jacks of the receiver to the AUDIO OUT (L/R) jacks of the DVD player using the
supplied audio pin cable.
2 Connect the system connector (TO DVD-E810) jack of the receiver to the system connector (TO RX-E810) jack of
the DVD player using the supplied system control cable.
3 Connect the speaker terminals (L) of the receiver to the speaker terminals of the left speaker and the speaker terminals
(R) of the receiver to the speaker terminals of the right speaker using the speaker cables supplied with the speaker set
(NX-E800). See page 13 for details.
y
• The system control connection is used to synchronize the specific operations between the receiver and the DVD player.
• If you want to connect an amplifier with a digital input instead of the RX-E810, use the DIGITAL OUT (COAXIAL or OPTICAL)
jacks of the DVD player and configure the “DIGITAL OUTPUT” setting in the setup menu (see page 52).
12 En
Connecting the System
■ Connecting the speaker cable
4
Tighten the knob to secure the wire.
Notes
1
Red: positive (+)
Black: negative (–)
PREPARATION
• Be sure to connect the left channel (L), right channel (R), “+”
(red) and “–” (black) properly. If the connections are faulty, no
sound will be heard from the speakers, and if the polarity of the
speaker connections is incorrect, the sound will be unnatural
and lack bass.
• Do not let the bare speaker wires touch each other or do not let
them touch any metal part of the receiver. This could damage
the receiver and/or the speakers.
• When connecting another speaker set instead of the NX-E800,
be sure to use speakers with the specified impedance shown on
the rear panel of the receiver and magnetically shielded. In case
the magnetically shielded speakers interfere with the monitor,
place the speakers away from the monitor.
Remove approximately 10 mm (3/8 in) of
insulation from the end of each speaker
cable and then twist the exposed wires of the
cable together to prevent short circuits.
10 mm (3/8 in)
2
Unscrew the knob.
Red: positive (+)
Black: negative (–)
3
Insert the bare wire into the terminal.
Red: positive (+)
Black: negative (–)
English
13 En
CONNECTING A TV
Connecting a TV
Follow the procedure below to connect your TV to the DVD player using the supplied video pin cable. Also, you can
enjoy high-quality pictures with a S-video connection, a component video connection or a scart connection (U.K. and
Europe models only) using a corresponding commercially available cable. For information on your TV, refer to the
owner’s manual supplied with it.
Note
Do not connect the power cable of the receiver, DVD player, or other components to the wall outlet until all cable connections are
completed.
■ S-video connection
Connect the S VIDEO jack of the DVD player to the
S-video input jack of your TV using a commercially
available S-video cable.
IN
VIDEO
TV
Video pin cable
(supplied)
AV
VIDEO OUT
COMPONENT
AV
MAINS
PR
DIGITAL OUT
AUDIO
OUT
L
Y
COAXIAL
OPTICAL
TO RX-E810
VIDEO OUT
COMPONENT
PR
DIGITAL OUT
S VIDEO
AUDIO
OUT
OPTICAL
S VIDEO jack
TO RX-E810
VIDEO
R
PB
L
Y
COAXIAL
S VIDEO
VIDEO
R
PB
DVD player
Connect the VIDEO jack of the DVD player to the
video input jack of your TV using the supplied
video pin cable.
■ Scart connection
(U.K. and Europe models only)
Connect the AV terminal of the DVD player to the scart
input terminal of your TV using a commercially available
scart cable.
Note
y
To enjoy TV sounds with the receiver, connect AUX (L/R) jacks
of the receiver to the audio output jacks of your TV using a
commercially available audio pin cable.
(U.K. and Europe models only)
When you make a scart connection, set “COMPONENT” to
“RGB” in the setup menu of the DVD player (see page 54).
■ Component video connection
AV
Connect the COMPONENT jacks of the DVD player to
the component video input jacks of your TV using a
commercially available component video cable.
VIDEO OUT
COMPONENT
PR
DIGITAL OUT
AUDIO
OUT
L
Y
COAXIAL
OPTICAL
Note
TO RX-E810
S VIDEO
(U.K. and Europe models only)
When you make a component video connection, set
“COMPONENT” to “YUV” in the setup menu of the DVD player
(see page 54).
AV
VIDEO OUT
COMPONENT
PR
DIGITAL OUT
AUDIO
OUT
L
Y
COAXIAL
OPTICAL
TO RX-E810
S VIDEO
VIDEO
PB
R
COMPONENT jacks
14 En
VIDEO
PB
R
AV terminal
(U.K. and Europe models only)
CONNECTING ANTENNAS
Connecting Antennas
To enjoy radio on the receiver, connect the supplied AM and FM antennas to the designated terminals. If there is a
problem of weak radio wave reception in your area or you want to improve radio reception, we recommend that you use
optional outdoor antennas. For details, consult the nearest authorized YAMAHA dealer or service center.
Note
Be sure to set the tuner frequency step (Asia and Taiwan models only) according to the frequency spacing in your area (see page 38).
Note
Indoor FM
antenna
(supplied)
ANTENNA
75
UNBAL.
Depending on the product, the shape of the tab is different from
the described illust.
3
Insert the AM loop antenna lead wires into
the AM terminal.
4
Replace the tab back to secure the wire.
5
Repeat steps 2 to 4 to insert the AM loop
antenna lead wires into the GND terminal.
6
Place the antenna away from the receiver and
speaker cables.
While listening to the radio, rotate the antenna head
to find the best angle for reception.
SPEAKERS
PREPARATION
AM loop
antenna
(supplied)
6 MIN / SPEAKER
DOCK
FM
DVD/CD
R
L
GND
IN
OUT
TAPE/MD
AM
AUX
R
L
Ground
(GND terminal)
■ About grounding
For maximum safety and minimum interference, connect
the antenna GND terminal to a good earth ground. A good
earth ground is a metal stake driven into moist earth.
Connecting the AM loop antenna
1
2
Attach the antenna stand to the antenna.
When attaching the antenna to the wall, you do not
need to use the antenna stand.
Press down the tab of the AM terminal.
Connecting the FM antenna
Connect the supplied indoor FM antenna to
the FM jack of the receiver.
2
Place the antenna away from the receiver and
speaker cables.
15 En
English
1
CONNECTING EXTERNAL COMPONENTS
Connecting External Components
You can connect various audio components, such as an MD player, a tape deck or a YAMAHA iPod universal dock to the
receiver. Also you can connect an MD recorder or a CD recorder to the DVD player using the DIGITAL OUT jacks. For
information on your external component, refer to the owner’s manual supplied with each component.
Note
Do not connect the power cable of the receiver, DVD player, or other components to the wall outlet until all cable connections are
completed.
Connecting an MD player or a tape
deck
If you connect an MD player or a tape deck to the receiver,
you can enjoy audio sources played on the component.
Connecting an MD recorder or a CD
recorder
If you connect an MD recorder or a CD recorder to the
DVD player with a digital connection, you can make a
digital recording.
ANALOG
IN
OUT
L
COAXIAL
R
MD player or
tape deck
OPTICAL
or
MD recorder or
CD recorder
Audio pin cable
Optical cable
Coaxial cable
ANTENNA
75
UNBAL.
DOCK
FM
DVD/CD
AV
GND
IN
OUT
TAPE/MD
AM
VIDEO OUT
COMPONENT
PR
R
DIGITAL OUT
AUDIO
OUT
L
Y
COAXIAL
AUX
OPTICAL
L
TO RX-E810
Receiver
VIDEO
PB
R
DVD player
1
Connect the TAPE/MD IN (L/R) jacks of the
receiver to the analog output jacks of an MD
player or a tape deck using a commercially
available audio pin cable.
2
To record audio output from the receiver,
connect the TAPE/MD OUT (L/R) jacks of the
receiver to the analog input jacks of an MD
player or a tape deck using a commercially
available audio pin cable.
16 En
Connect the DIGITAL OUT (COAXIAL or
OPTICAL) jack of the DVD player to the digital
input (coaxial or optical) jack of an MD recorder
or a CD recorder using a commercially available
coaxial or optical cable.
Notes
• The DIGITAL OUT jacks are compatible with PCM, Dolby
Digital and DTS signals.
• The DIGITAL OUT (OPTICAL) jack is designed based on EIA
standards. To make a digital connection, use an optical cable
that meets EIA standards.
Connecting External Components
Connecting a YAMAHA iPod universal dock
The receiver (RX-E810) is equipped with the DOCK terminal on the rear panel that allows you to connect a YAMAHA
iPod universal dock (such as YDS-10 sold separately) where you can station your iPod and control playback of your iPod
using the supplied remote control. Connect a YAMAHA iPod universal dock (such as YDS-10 sold separately) to the
DOCK terminal on the rear of the receiver using its dedicated cables. Once the connection is complete, station your iPod
in the YAMAHA iPod universal dock.
PREPARATION
iPod
YAMAHA iPod universal dock
(such as YDS-10 sold separately)
MAINS
ANTENNA
75
UNBAL.
DOCK
SPEAKERS
6 MIN / SPEAKER
FM
DVD/CD
AC OUTLETS
SWITCHED
R
L
GND
IN
OUT
TAPE/MD
AM
SUBWOOFER
OUT
100W MAX. TOTAL
AUX
R
TO DVD-E810
L
Receiver
(Europe model)
Notes
• Do not connect the power cable of the receiver, DVD player, or other components to the wall outlet until all cable connections are
completed.
• Only iPod (Click and Wheel), iPod nano, and iPod mini are supported.
• You need a YAMAHA iPod universal dock (such as YDS-10 sold separately) and its dedicated cable compatible with the DOCK
terminal of the receiver.
• Do not connect any iPod accessories (such as headphones, a wired remote control, or an FM transmitter) to your iPod when it is
stationed in a YAMAHA iPod universal dock (such as YDS-10 sold separately).
• Unless your iPod is firmly stationed in a YAMAHA iPod universal dock (such as YDS-10 sold separately) connected to the DOCK
terminal of the receiver, audio signals may not be output properly.
• Once the connection between your iPod and the receiver is complete and the receiver is set to DOCK mode (see page 47), “iPod
connected” appears in the front panel display. If the connection between your iPod and the receiver fails, a status message appears in
the front panel display. For a complete list of connection status message, see the iPod section in “Troubleshooting” on page 60.
• Your iPod battery is automatically charged when your iPod is stationed in a YAMAHA iPod universal dock (such as YDS-10 sold
separately) connected to the DOCK terminal of the receiver as long as the receiver is turned on.
• Depending on the type of the iPod, you may need to insert one of the iPod adapters supplied with a YAMAHA iPod universal dock
(such as YDS-10 sold separately) into the dock slot before you station your iPod.
English
17 En
CONNECTING THE POWER CABLES
Connecting the Power Cables
Once all connections are complete, connect the power cable of the DVD player to the AC OUTLET(S) terminal on the
rear of the receiver (or the AC wall outlet if the AC OUTLET(S) terminal is not available), and then plug the power cable
of the receiver into the AC wall outlet.
MAINS
ANTENNA
75
UNBAL.
SPEAKERS
To the AC wall outlet
6 MIN / SPEAKER
DOCK
FM
DVD/CD
AC OUTLETS
SWITCHED
R
L
GND
IN
OUT
TAPE/MD
AM
SUBWOOFER
OUT
TO DVD-E810
100W MAX. TOTAL
AUX
R
Receiver
(Europe model)
L
AV
MAINS
To AC OUTLET(S) on the
rear panel of the receiver
(or the AC wall outlet)
VIDEO OUT
COMPONENT
PR
DIGITAL OUT
AUDIO
OUT
L
Y
COAXIAL
OPTICAL
TO RX-E810
S VIDEO
VIDEO
PB
R
DVD player
■ AC OUTLET(S) (SWITCHED)
U.K. and Australia models ..................................... 1 outlet
Korea model ...............................................................None
Other models .........................................................2 outlets
Use these outlet(s) to supply power to the DVD player or any connected components. Connect the power cable of your
other components to these outlet(s). Power to these outlet(s) is supplied when the receiver is turned on. For information
on the maximum power or the total power consumption of the components that can be connected to these outlet(s), see
“Specifications” on page 67.
18 En
SETTING THE SYSTEM
Setting the System
Before starting playback operation, follow the procedure below to configure the system settings.
Step 1: Turn on the power and
select the DVD input
Step 2: Adjust the clock
HOUR MIN
DISPLAY
NATURAL SOUND STEREO RECEIVER RX-E810
PURE DIRECT
STANDBY/ON
STANDBY/ON
TV
DISPLAY
TIMER
MEMORY
2
5
6
3
4
7
8
SCAN
DIMMER
PRESET/BAND
PRESET/TUNING
VOLUME
TIME ADJ
BASS
STANDBY/ON
1
AUTO/MAN'L
TIMER
TREBLE
HOUR
MIN
INPUT
BALANCE
PHONES
L
R
MIN
9
PREPARATION
POWER
MAX
0
REPEAT
SLEEP
TIME ADJ PRESET/BAND
AB
DVD/CD
TUNER
BAND
TAPE/MD
AUX/TV
DOCK
DVD/CD
SUBTITLE ANGLE
ZOOM
1
Press DISPLAY on the front panel of the
receiver.
“Clock Time” appears in the front panel display for a
few seconds, and then “Set Clock” appears.
2
Press TIME ADJ for about two seconds to
enter the clock setting mode.
3
To set the hour setting ahead, press HOUR
repeatedly. To set the hour setting backward,
press HOUR repeatedly while holding down
PRESET/BAND.
4
To set the minute setting ahead, press MIN
repeatedly. To set the minute setting
backward, press MIN repeatedly while
holding down PRESET/BAND.
AUDIO
1
Turn on your TV and then press STANDBY/
ON to turn on the receiver.
If the DVD player is connected to the receiver with
the system control cable, the DVD player turns on
automatically. Otherwise, press STANDBY/ON on
the front panel of the DVD player to turn on it.
The front panel display of each component lights up.
2
Press DVD/CD to select “DVD/CD” as an
input source.
3
On your TV, select the input to which the DVD
player is connected (EXT1, AV1, etc.). For
details, refer to the manual supplied with
your TV.
The default screen appears on the TV screen.
Note
If the picture is distorted on your TV, the color system (NTSC and
PAL) setting of the DVD player may not match your TV.
To switch the color system setting in such case, press
AUDIO while the disc tray is open.
and then
English
19 En
Setting the System
5
Press TIME ADJ once again to confirm the
clock setting.
“Adjusted” appears in the front panel display for a
few seconds, and then the clock appears.
4
4:3 PAN SCAN
Select this if the aspect ratio of your TV is 4:3 and
you want both sides of the picture to be trimmed or
formatted to fit your TV screen.
4:3 LETTER BOX
Select this if the aspect ratio of your TV is 4:3. In this
case, a wide picture with black bands on the upper
and lower portions of the TV screen are displayed.
y
You can switch between 12-hour (AM/PM) format and 24-hour
format by pressing HOUR or MIN while the clock is displayed in
the front panel display.
16:9
Select this if you have a widescreen TV.
Step 3: Set the aspect ratio
Follow the procedure below to configure the aspect ratio
setting of the DVD player. (The default setting is “4:3
PAN SCAN”.)
ON SCREEN
PRESET
ENTER
A-E
5
To exit from the setup menu, press SET UP
once again.
Step 4: Set the OSD language
MENU
INFO.
A-E
TOP MENU
/RETURN
SET UP
Press
or
to select the desired
setting, and then press ENTER to confirm the
selection.
Cursor keys,
ENTER
Follow the procedure below to configure the language
setting used for the OSD and setup menus. (The default
settings is “ENGLISH”.)
SET UP
TV VOL
ON SCREEN
VOLUME
PRESET
MENU
DISPLAY
INFO.
A-E
ENTER
A-E
TOP MENU
/RETURN
SET UP
Cursor keys,
ENTER
SET UP
TV VOL
VOLUME
DISPLAY
VIDEO SETUP PAGE
TV TYPE
TV DISPLAY
PROGRESSIVE
PICTURE SETTING
COMPONENT
4:3 PAN SCAN
4:3 LETTER BOX
16:9
GENERAL SETUP PAGE
DISC LOCK
PROGRAM
OSD LANGUAGE
SCREEN SAVER
DIVX(R) VOD CODE
1 Press SET UP.
The setup menu appears on the TV screen.
ENGLISH
DANSK
DEUSTCH
ESPAÑOL
FRANÇAIS
ITALIANO
NEDERLANDS
NORSK
2
Press
or
repeatedly to select “VIDEO
SETUP PAGE”.
1
Press SET UP.
The setup menu appears on the TV screen.
3
Press
or
then press .
2
Press
or
PAGE”.
3
Press
or
to select “OSD
LANGUAGE”, and then press .
4
Press
/
to select the desired
language, and then press ENTER to confirm
the selection.
20 En
to select “TV DISPLAY”, and
to select “GENERAL SETUP
Setting the System
Step 5: Set the the default audio,
subtitle, and disc menu languages
If you set the default audio, subtitle, and disc menu
languages, the DVD player automatically switches to the
selected language when a disc is loaded. If the selected
language is not available on the disc, the default language
of the disc will be used instead. (The default setting is
“ENGLISH” for audio and disc menu and “OFF” for
subtitle.)
Press
or
to select the desired
language, and then press ENTER to confirm
the selection.
If the desired language is not listed, select
“OTHERS”, use the number keys to enter the 4-digit
language code (see page 57), and then press ENTER.
5
To exit from the setup menu, press SET UP
once again.
PREPARATION
STANDBY/ON
4
POWER
TV
Number
Keys
1
2
3
4
5
6
7
8
SCAN
DIMMER
9
0
REPEAT
TV CH
A-B
FREQ/TEXT
PROG
MODE
PTY SEEK
TV INPUT
ON SCREEN
START
SHUFFLE
PRESET
MENU
INFO.
A-E
SET UP
ENTER
A-E
TOP MENU
/RETURN
Cursor keys,
ENTER
SET UP
PREFERENCE PAGE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
VR LIST
MP3/JPEG NAV
DIVX SUBTITLE
PASSWORD
ENGLISH
CHINESE (SIMP)
FRENCH
SPANISH
PORTUGUESE
POLISH
ITALIAN
TURKISH
1
Press SET UP.
The setup menu appears on the TV screen.
2
Press
or
PAGE”.
to select “PREFERENCE
Note
“PREFERENCE PAGE” is available only when no disc is loaded
or the DVD player is in the Stop mode (see page 25).
3
English
Press
or
to select “AUDIO”,
“SUBTITLE”, or “DISC MENU”, and then
press .
21 En
Basic Receiver Operations
Basic Receiver Operations
Follow the procedure below to select an input source and adjust the sound settings on the receiver.
PHONES
3
Start playback on the selected source
component or select a broadcast station.
For information on the disc playback, see page 25, and
for information on tuning, see page 37.
4
Press VOLUME +/– to adjust the volume to
the desired output level.
5
Rotate BASS, TREBLE, or BALANCE on the
front panel of the receiver to adjust the
following settings.
BALANCE PURE DIRECT
NATURAL SOUND STEREO RECEIVER RX-E810
PURE DIRECT
TIMER
DISPLAY
STANDBY/ON
BASS
MEMORY
AUTO/MAN'L
PRESET/BAND
PRESET/TUNING
VOLUME
TIME ADJ
TIMER
MIN
HOUR
TREBLE
INPUT
BALANCE
PHONES
L
R
MIN
BASS
TREBLE
STANDBY/ON
)
BASS: Adjusts the low frequency response.
TREBLE: Adjusts the high frequency response.
BALANCE: Adjusts the volume level of each left
and right speaker channel.
POWER
STANDBY/ON
(
MAX
TV
1
2
3
4
5
6
7
8
AE
9
0
ENTERSCAN
■ Pure Direct mode
DIMMER
AE
The Pure Direct mode shuts down the tone control
circuitry, allowing you to enjoy pure high-fidelity sounds
from analog sources.
TOP MENU
/RETURN
SET UP
TV VOL
VOLUME
DISPLAY
VOLUME +/–
SLEEP
DVD/CD
TUNER
BAND
TAPE/MD
AUX/TV
DOCK
SUBTITLE ANGLE
ZOOM
AUDIO
Input
selection
keys
Press PURE DIRECT on the front panel of the
receiver to turn on the Pure Direct mode.
PURE DIRECT lights up, and the front panel display
automatically dims.
Notes
• While the Pure Direct mode is turned on, neither BASS,
TREBLE, nor BALANCE are available.
• If you carry out any operation while the Pure Direct mode is
turned on, the front panel display lights up briefly to
acknowledge the command and dims again.
1
Press STANDBY/ON to turn on the receiver.
If the DVD player is connected to the receiver with
the system control cable, the DVD player turns on
automatically. The front panel display of each
component lights up.
y
This system has the auto-standby function (see page 45) which
automatically set to the system to the standby mode if you do not
operate the system for 30 minutes while the receiver is set to the
DVD/CD input mode.
2
Press one of the input selection keys to
select the desired input source.
22 En
To turn off the Pure Direct mode
Press PURE DIRECT again so that PURE DIRECT turns
off and the front panel display lights up.
■ To use headphones
Connect the headphones to the PHONES jack. You can
listen to the sound to be output from the speakers through
the headphones.
Basic Receiver Operations
Changing the front panel display settings
Follow the procedure below to change the settings of the receiver’s front panel display.
■ To switch the display mode
STANDBY/ON
You can switch the information displayed in the receiver’s
front panel display between the current input and clock.
POWER
TV
1
2
3
4
5
6
7
8
SCAN
DIMMER
9
0
Note
You cannot display the clock unless you adjust it (see page 19).
DIMMER
Press DISPLAY repeatedly to select the desired
display mode.
Each time you press the key, the display changes as
follows.
A-B
REPEAT
TV CH
FREQ/TEXT
PROG
MODE
PTY SEEK
TV INPUT
ON SCREEN
START
SHUFFLE
PRESET
MENU
(Current input)
INFO.
A-E
ENTER
A-E
Clock Time
TV VOL
BASIC
OPERATIONS
TOP MENU
/RETURN
SET UP
Timer Input
VOLUME
DISPLAY
DISPLAY
ON Time
SLEEP
DVD/CD
TUNER
BAND
TAPE/MD
AUX/TV
DOCK
SUBTITLE ANGLE
ZOOM
OFF Time
AUDIO
y
“Timer Input”, “ON Time”, and “OFF Time” are used to set the
clock timer (see page 43).
■ To dim the display
You can dim the front panel display of the receiver. The
front panel display of the DVD player also dims if it is
connected to the receiver using a system control
connection (see page 12). (The default setting is
“DIMMER OFF”.)
Press DIMMER to select “DIMMER ON”.
To return to normal brightness
Press DIMMER to select “DIMMER OFF”.
English
23 En
Supported Disc Types
Supported Disc Types
You can enjoy movie or music discs with the DVD player. Since some disc operations are limited to specific disc types,
the supported disc types are indicated using the icons shown below. Each means that the operations is limited to the
corresponding disc type. Operations with no icon indicated are available for all disc types.
Note
Depending on a disc format, some discs may not be compatible with the DVD player. Before loading a disc into the DVD player, be sure
to check the disc compatibility of the DVD player (see page 63).
DVD/DVD-VR
VIDEO CD/
SUPER VIDEO CD
Music CD
DVD
VCD
CD
■ About data discs (MP3, WMA, JPEG, and
DivX)
Root
Folder
Track (File)
You can play back MP3 and WMA format files recorded
on a CD-R/RW, DVD+R/RW, and DVD-R/RW with
similar uses as a music CD. The DVD player regards files
in the disc as tracks (as shown on the left). Also you can
play back JPEG picture files and DivX video files
recorded on a CD-R/RW, DVD+R/RW, or DVD-R/RW.
For details about how to play those discs, see “Playing
back MP3/WMA/JPEG/DivX discs” on page 32.
Note
Depending on recording conditions such as recording software
settings, the DVD player may not be able to play the disc or play
tracks in the order they were recorded. For information on disc
compatibility of the DVD player, see page 63.
24 En
Basic Disc Playback Operations
Basic Disc Playback Operations
Follow the procedures below to carry out basic disc playback operations.
Notes
To advance frame-by-frame DVD
• If the inhibit icon ( ) appears on the TV when a button is
pressed, it means the function is not available on the current
disc or the current status.
• Depending on the disc, some operations may be different or
restricted.
Press e to pause playback, then press e repeatedly.
Each time you press e, playback advances one frame at a
time. To return to normal playback, press h.
VCD
To fast reverse or fast forward
STANDBY/ON
To fast reverse, hold down b for a few seconds.
To fast forward, hold down a for a few seconds.
Each time you press the button after holding down it, the
speed increases (decreases).
POWER
TV
Number
keys
1
2
5
6
9
0
3
4
7
8
SCAN
DIMMER
SCAN
REPEAT
To slow reverse or slow forward DVD
A-B
FREQ/TEXT
s
VCD
PROG
MODE
PTY SEEK
TV INPUT
START
e
To slow reverse press
. To slow forward, press
Each time you press the button, the speed increases
(decreases).
SHUFFLE
b, a
ON SCREEN
PRESET
MENU
ENTER
A-E
h
INFO.
A-E
SET UP
TOP MENU
/RETURN
,
,
ENTER
.
Note
BASIC
OPERATIONS
TV CH
The slow reverse feature is not available for VCDs and SVCDs.
To skip chapters (tracks)
To start playback
Load the disc (press
on the front panel of the DVD
player to open/close the disc tray).
y
• This unit automatically starts playback when a disc is loaded. In
case that the disc has the start menu, you may need to press h
to start playback.
• For CDs, you can play back the first few seconds of each track
sequentially by pressing SCAN while the plalyback stops. Press
h to return to normal playback.
To stop playback
Press s.
y
This unit automatically memorizes the stopping position when
playback is stopped. If you press h, playback resumes from
where it left off. If you press s once again, the stopping position
will be cleared from the memory. (This is called “Stop mode”.)
To pause playback
To skip to the start of the current chapter (track), press
b.
To skip to the next chapter (track), press a.
To skip to the previous chapter (track), quickly press b
twice.
Note
The skip feature may not work properly when playing back a
VCD or SVCD using the PBC menu (see page 31).
To specify a chapter (track) for playback
Use the number keys to enter the chapter (track) number
you want to play.
To specify 1-digit number, press a number key to enter the
track number and then ENTER, or press 0 and then a
number key to enter the track number.
Note
This feature may not work properly when playing back a VCD or
SVCD using the PBC menu (see page 31).
English
Press e.
To return to normal playback, press h.
25 En
Basic Disc Playback Operations
■ To repeat between two points (A-B
Repeat)
Repeating disc playback
(Repeat Play)
You can repeat the specified section of a chapter (track) by
setting two points (start and end points).
You can repeat the playback of the selected item in a disc.
Also, you can set two points to repeat the specified section
of a chapter (track) with A-B Repeat.
Notes
• Repeat Play may not work depending on DVD disc types.
• Repeat Play does not work while playing back a VCD or SVCD
using the PBC menu (see page 31).
STANDBY/ON
Note
You can use A-B Repeat only within one chapter (track).
1
Play back the chapter or track that includes
the section you want to repeat.
2
At the position where you want to set as the
start point of the repeat section, press A-B.
“A” appears on the TV screen.
3
At the position where you want to set as the
end point of the repeat section, press A-B
once again.
“AB” appears on the TV screen and A-B Repeat
starts.
POWER
TV
1
2
3
4
5
6
7
8
SCAN
DIMMER
9
0
A-B
REPEAT
REPEAT
A-B
1
Play back the disc, title, or chapter (track)
you want to repeat.
2
Press REPEAT to select the desired Repeat
Play mode.
Each time you press the key, the mode changes as
follows.
To cancel A-B Repeat
Press A-B once.
Playing back randomly
(Shuffle Play)
You can play back chapters or tracks in the disc in random order.
Notes
DVD
↓
REPEAT OFF (Normal playback)
↓
• Shuffle Play is not available for DVD-VRs.
• Shuffle Play does not work while playing back a VCD or SVCD
using the PBC menu (see page 31).
CHAPTER (Repeat Play by chapter)
↓
TITLE (Repeat Play by title)
↓
STANDBY/ON
POWER
ALL (Repeat Play by disc)
TV
VCD/CD
↓
REPEAT OFF (Normal playback)
↓
1
2
5
6
9
0
3
TRACK (Repeat Play by track)
TV CH
MP3/WMA/JPEG/DivX
TV INPUT
↓
↓
REPEAT FOLDER (Repeat Play by folder)
To cancel Repeat Play
Press REPEAT to select “REPEAT OFF”.
y
When playing back a JPEG or picture CD with the slide show
mode, “REPEAT ALL” (Repeat Play by disc) appears instead of
“REPEAT FOLDER”.
26 En
A-B
PROG
MODE
↓
8
DIMMER
FREQ/TEXT
ALL (Repeat Play by disc)
REPEAT ONE (Repeat Play by file)
7
SCAN
REPEAT
↓
REPEAT OFF (Normal playback)
4
1
Play back the disc.
PTY SEEK
START
SHUFFLE
SHUFFLE
Basic Disc Playback Operations
2
Press SHUFFLE to select the desired Shuffle
Play mode.
Each time you press the key, the mode changes as
follows.
↓
2
Press
or
to select “TT TIME” or
“CH TIME”, and then press .
TT TIME:
Select this if you want to specify an elapsed time for
the current title.
CH TIME:
Select this if you want to specify an elapsed time for
the current chapter.
3
Use the number keys to enter hours,
minutes, and seconds.
Playback skips to the specified position.
SHUFFLE OFF (Normal playback)
↓
SHUFFLE (Shuffle Play)
↓
SHUFFLE REPEAT (Shuffle Play with Repeat Play)
To cancel Shuffle Play
Press SHUFFLE to select “SHUFFLE OFF”.
Specifying an elapsed time for
playback (Time Search) DVD VCD
y
To return to the previous menu, press
menu, press ON SCREEN.
■ Time Search on VCD
Notes
1
• Using the Time Search feature for a VCD or SVCD
automatically closes the PBC menu (see page 31).
• You cannot specify an elapsed time that exceeds the total time.
STANDBY/ON
MENU
1
2
5
6
9
3
4
7
8
SCAN
DIMMER
REPEAT
TOTAL ELAPSED 0:02:25
3
Use the number keys to enter hours,
minutes, and seconds.
Playback skips to the specified position.
A-B
PROG
PTY SEEK
TV INPUT
START
SHUFFLE
PRESET
MENU
INFO.
A-E
BITRATE 16
Press
or
to select “DISC TIME” or
“TRACK TIME”, and then press .
DISC TIME:
Select this if you want to specify an elapsed time for
the entire disc.
TRACK TIME:
Select this if you want to specify an elapsed time for
the current track.
FREQ/TEXT
MODE
ON SCREEN
02/14
0:49:17
0:03:43
OFF
2
0
TV CH
ON SCREEN
TRACK
DISC TIME
TRACK TIME
REPEAT
POWER
TV
Number
keys
While playing back a disc, press ON SCREEN.
The OSD menu appears on the TV screen.
BASIC
OPERATIONS
You can specify an elapsed time where you want playback
to start.
. To exit from the OSD
ENTER
A-E
Cursor keys
TOP MENU
/RETURN
SET UP
y
■ Time Search on DVD
1
To return to the previous menu, press
menu, press ON SCREEN.
. To exit from the OSD
While playing back a disc, press ON SCREEN.
The OSD menu appears on the TV screen.
MENU
TITLE
CHAPTER
AUDIO
SUBTITLE
02/14
02/14
5.1CH
ENG
BITRATE 16
TOTAL ELAPSED 0:02:25
English
27 En
Basic Disc Playback Operations
Specifying a preview picture for
playback (Scan Search) DVD VCD
You can preview the content of a DVD or VCD with
pictures selected at regular intervals, and specify a
preview picture for playback.
Notes
• You can only select “TRACK INTERVAL” during VCD
playback when the PBC menu (see page 31) is turned off.
• CHAPTER DIGEST and CHAPTER INTERVAL are not
available for DVD-VR discs.
3
STANDBY/ON
POWER
TV
Number
keys
1
2
3
4
5
6
7
8
SCAN
DIMMER
9
0
y
SCAN
A-B
REPEAT
TV CH
FREQ/TEXT
PROG
MODE
PTY SEEK
TV INPUT
START
4
PRESET
MENU
INFO.
A-E
SET UP
ENTER
A-E
TOP MENU
/RETURN
Cursor keys,
ENTER
1
While the disc is loaded into the DVD player,
press SCAN.
2
Press
or
to select one of the
following preview modes, and then press
ENTER.
DVD
TITLE DIGEST:
Displays the beginning of each title.
CHAPTER DIGEST:
Displays the beginning of each chapter.
TITLE INTERVAL:
Divides a title into parts at 10 minutes intervals and
play back the first 3-4 seconds of each part.
CHAPTER INTERVAL:
Divides a chapter into parts at 10 minutes intervals
and play back the first 3-4 seconds of each part.
VCD
TRACK DIGEST:
Displays the beginning of each track.
TRACK INTERVAL:
Divides a track into six parts at regular intervals, and
displays the beginning of each part.
DISC INTERVAL:
Divides a disc into six parts at regular intervals, and
displays the beginning of each part.
28 En
• To select another preview mode, use the cursor keys to select
“MENU” in the preview list, and then press ENTER.
• To cancel Scan Search, use the cursor keys to select “EXIT” in
the preview list, and then press ENTER or press SCAN again.
SHUFFLE
b, a
ON SCREEN
Use the cursor keys to select the desired
preview picture or number keys to input the
picture number.
Pressing b or a switches the preview list to
the previous/next page.
Press ENTER to start the playback of the
selected item.
Basic Disc Playback Operations
Customizing playback order
(Program Play)
You can customize the playback order for chapters or
tracks stored in the disc. This unit can memorize playback
order of 10 discs (20 chapters or 20 tracks for each disc).
y
• To cancel the Program Play feature, use the cursor keys to select
“EXIT” in the program list, and then press ENTER.
• To remove a chapter or track programmed in the list, use the
cursor keys to select the program number to be cleared, and
then press ENTER.
Notes
• The PBC menu (see page 31) is not available during Program
Play of a VCD or SVCD.
• The Program Play feature is not available for MP3, WMA,
JPEG, and DivX discs.
STANDBY/ON
POWER
TV
Number
keys
2
3
4
5
6
7
8
SCAN
DIMMER
9
0
A-B
REPEAT
TV CH
BASIC
OPERATIONS
1
FREQ/TEXT
PROG
MODE
PTY SEEK
TV INPUT
PROG
START
SHUFFLE
b, a
ON SCREEN
PRESET
MENU
INFO.
A-E
SET UP
ENTER
A-E
TOP MENU
/RETURN
Cursor keys,
ENTER
While the disc is loaded into the DVD player,
press PROG.
The program list appears on the TV screen.
2
Use the cursor keys to select a program
number, and then press ENTER.
Pressing b or a switches the program list to
the previous/next page.
3
To program the order for a DVD disc, use the
number keys and ENTER to enter a title
number, and then enter a chapter number.
To program the order for a VCD, SVCD, or CD,
use number keys and ENTER to enter a track
number.
Repeat steps 2 and 3 until you select all desired
chapters (tracks).
4
To start playback with Program Play, use the
cursor keys to select “START”, and then
press ENTER.
English
1
29 En
Basic Disc Playback Operations
Selecting audio and subtitle
languages DVD /audio channel
settings VCD
Zooming the picture
DVD
VCD
You can zoom in or zoom out the picture during disc
playback.
You can select audio and subtitle languages for DVD disc
playback and audio channel settings for VCD. If no
language is selected, the default languages specified in the
setup menu (see page 21) are selected.
ON SCREEN
PRESET
MENU
INFO.
A-E
ENTER
A-E
TOP MENU
/RETURN
SET UP
Cursor keys,
ENTER
Note
TV VOL
TV VOL
VOLUME
DISPLAY
The selections of audio and subtitle languages are available only
with multi-language compatible discs. Also, languages available
for each disc may vary. For information on your disc, refer to the
operating instructions in the disc’s menu or on its jacket.
SLEEP
DVD/CD
TUNER
BAND
TAPE/MD
AUX/TV
DOCK
VOLUME
SUBTITLE ANGLE
DISPLAY
ZOOM
AUDIO
ZOOM
SLEEP
DVD/CD
TUNER
BAND
TAPE/MD
AUX/TV
DOCK
SUBTITLE ANGLE
SUBTITLE
ZOOM
AUDIO
AUDIO
1
While playing back a disc, press ZOOM.
Each time you press the key, the picture scale changes
as follows.
2X → 3X → 4X → 1/2 → 1/3 → 1/4 → original scale (1X)
↑
■ For DVD
To select an audio language while playing back a disc,
press AUDIO repeatedly until the desired language
appears on the TV screen.
To select a subtitle language while playing back a disc,
press SUBTITLE repeatedly until the desired language
appears on the TV screen.
■ For VCD
To switch the audio channel settings (stereo, monaural,
etc.), press AUDIO repeatedly.
y
To turn off the subtitle, press SUBTITLE repeatedly to select
“OFF”.
30 En
2
If you select “2X”, “3X” or “4X” in step 1, use
the cursor keys to pan through the enlarged
picture.
y
To return to the original picture scale, press ZOOM repeatedly to
select the original scale.
Basic Disc Playback Operations
Selecting a viewing angle
DVD
You can select the desired viewing angle during DVD
playback.
Note
This selection is available only with multi-angle compatible discs.
Also, viewing angles available for each disc may vary. For
information on your disc, refer to the operating instructions in the
disc’s menu or on its jacket.
TV VOL
VOLUME
Operating the disc menu
Many DVDs and VCDs (SVCDs) include original
navigational menus called “DVD menu” and “Playback
Control (PBC) menu”. These menus provide a convenient
way to operate the disc. Follow the procedure below to use
those menus on the DVD player.
Note
Menu contents or operation method of each disc may vary. For
information on your disc, refer to the operation instructions in the
disc’s menu or on its jacket.
DISPLAY
SLEEP
STANDBY/ON
DVD/CD
TUNER
BAND
TAPE/MD
AUX/TV
DOCK
SUBTITLE ANGLE
ZOOM
POWER
TV
Number
keys
AUDIO
ANGLE
1
2
3
4
5
6
7
8
SCAN
DIMMER
9
0
BASIC
OPERATIONS
A-B
REPEAT
TV CH
FREQ/TEXT
PROG
MODE
PTY SEEK
TV INPUT
START
SHUFFLE
b, a
While playing back a disc, press ANGLE
repeatedly until the desired viewing angle is
selected.
ON SCREEN
PRESET
MENU
MENU
INFO.
Cursor keys,
ENTER
A-E
SET UP
ENTER
A-E
TOP MENU
/RETURN
RETURN
■ To operate the DVD menu DVD
1
While playing back a disc, press MENU.
The DVD menu of the disc appears on the TV screen.
y
Depending on the disc, the DVD menu may automatically appear
after the disc is loaded.
2
Use the cursor keys to select a menu item,
and then press ENTER to confirm the
selection.
■ To operate the PBC menu VCD
If you load a VCD or SVCD that includes the Playback
Control (PBC) feature (version 2.0 only), the PBC menu
automatically appears on the TV screen. To operate the
menu with the remote control, use the following keys.
Number keys or b / a: Selects an item.
RETURN: Returns to the menu screen.
MENU: Displays or closes the PBC menu.
y
31 En
English
If you set “PBC” to “OFF” in the setup menu of the DVD player
(see page 55), the PBC menu does not appear automatically when
a disc is loaded.
Basic Disc Playback Operations
Playing back MP3/WMA/JPEG/DivX
discs
You can play back MP3, WMA, and DivX format files
recorded on a CD-R/RW, DVD+R/RW, and DVD-R/RW.
Also you can view JPEG files in the commercially
available JPEG discs (such as KODAK Picture CDs) or
recorded on a CD-R/RW, DVD+R/RW, and DVD-R/RW.
2
Press
or
to select a folder, and then
press ENTER.
The file list of the selected folder appears on the TV
screen.
3
Press
,
, or number keys to select a
file, and then press ENTER.
Playback starts from the selected file to the end of the
folder.
Notes
• This unit cannot display special characters such as double-byte
characters used for folder and file names.
• Depending on the disc format, characteristics, or recording
conditions, the unit may not read or play back some discs
properly. For information on disc compatibility of the DVD
player, see page 63.
• If a disc contains a folder consisted of more than 500 files, the
unit may not read or play back the disc properly.
STANDBY/ON
TV
Number
keys
2
3
4
5
6
7
8
SCAN
DIMMER
9
0
FREQ/TEXT
PTY SEEK
TV INPUT
While viewing a JPEG disc, press s.
The JPEG pictures appear in thumbnailed form.
Pressing b or a switches the thumbnail list to
the previous/next page.
2
To view a specified picture in full size, use
the cursor keys to select a thumbnail image,
and then press ENTER.
s
START
SHUFFLE
PRESET
MENU
. Also you
.
1
b, a
ON SCREEN
or
• While viewing a JPEG file, you can select a scan effect by pressing
ANGLE repeatedly.
PROG
MODE
or flip it horizontally by pressing
can rotate it 90 degrees by pressing
You can view the JPEG files stored in the selected folder
or the disc as small thumbnail images.
A-B
REPEAT
TV CH
pressing
■ Viewing JPEG pictures in thumbnailed
form
POWER
1
y
• While viewing a JPEG file, you can zoom in the picture by
pressing ZOOM. Also, you can pan through the enlarged
picture using the cursor keys.
• While viewing a JPEG file, you can flip the picture vertically by
h
INFO.
A-E
ENTER
A-E
TOP MENU
/RETURN
SET UP
TV VOL
Cursor keys,
ENTER
VOLUME
DISPLAY
SLEEP
DVD/CD
TUNER
BAND
TAPE/MD
AUX/TV
DOCK
SUBTITLE ANGLE
SUBTITLE
ANGLE
ZOOM
AUDIO
AUDIO
ZOOM
y
• To start the slide show from the first picture of the current page,
use the cursor keys to select
, and then press ENTER.
• To return to the disc menu, press MENU.
1
Load a disc into the DVD player.
For MP3 and WMA discs, the disc menu appears. For
JPEG discs, the disc menu appears on the TV screen.
Press h to start the slide show (the slide show may
start automatically with some commercially available
JPEG discs). For a DivX disc, the interactive menu
appears if the disc includes DivX Media Format
(DMF). Refer to “About DivX Media Format (DMF)”
for details. Otherwise, follow the steps below.
32 En
Basic Disc Playback Operations
■ About DivX Media Format (DMF)
DivX Media Format (DMF) enables you to play back the
DivX files with interactive features such as interactive
menus, alternate audio and subtitles. Follow the procedure
below to operate the interactive menu.
1 Load a disc into the DVD player.
The interactive menu appears on the TV screen.
2
Use the cursor keys to select a chapter.
3
Press ENTER or p to start playback from
the selected chapter.
To access the interactive menu during playback
Press MENU.
To return to the data disc menu when the disc
menu is displayed
Press s.
BASIC
OPERATIONS
y
• You can select an audio or turn on/off the subtitle by pressing
AUDIO or SUBTITLE during playback.
• To select an external subtitle language, you need to set “DIVX
SUBTITLE” in the setup menu of the DVD player (see
page 55).
English
33 En
Basic Disc Playback Operations
Viewing or changing playback settings on the TV (OSD menu)
DVD
VCD
You can view and change the settings for the DVD or VCD (SVCD) currently played back.
Note
Displaying the OSD menu for a VCD or SVCD automatically closes the PBC menu (see page 31).
1
STANDBY/ON
POWER
TV
Number keys
1
2
3
4
5
6
7
8
SCAN
DIMMER
9
0
y
For CDs, each time you press ON SCREEN, the time
display changes as follows: TOTAL ELAPSED → TOTAL
REMAIN → SINGLE ELAPSED → SINGLE REMAIN.
A-B
REPEAT
TV CH
While playing back a disc, press ON
SCREEN.
The OSD menu appears on the TV screen. The menu
items vary depending on the disc type.
FREQ/TEXT
PROG
MODE
PTY SEEK
TV INPUT
ON SCREEN
START
SHUFFLE
PRESET
MENU
ENTER
A-E
ON SCREEN
INFO.
A-E
SET UP
TOP MENU
/RETURN
2
To select a menu item, press
then press .
3
To change the setting of the selected menu
item, press
or
. To specify numbers or
time, use the number keys.
Cursor keys,
ENTER
or
, and
y
To return to the previous menu, press
menu, press ON SCREEN.
■ OSD menu items
Items for DVD
Description
TITLE
The current title and the number of titles in the disc
CHAPTER
The current chapter and the number of chapters in the disc
AUDIO
The current settings for audio channels and audio language
SUBTITLE
The current setting for subtitle language
ANGLE
The current angle and the number of angles in the disc
TT TIME
The total time of the current title
CH TIME
The total time of the current chapter
REPEAT
The current setting for the Repeat Play feature
TIME DISP.
The current setting for the time display
Items for VCD/SVCD
Description
TRACK
The current track and the number of track in the disc
DISC TIME
The total time of the disc
TRACK TIME
The total time of the current track
REPEAT
The current setting for the Repeat Play feature
TIME DISP.
The current setting for the time display
34 En
. To exit from the OSD
Restricting Disc Playback
Restricting Disc Playback
DVD
You can set playback restrictions for certain discs using the parental control or disc lock feature. Only users who know
the password (see page 36) can access the locked discs.
Setting the parental control level
3
You can restrict playback according to a predetermined
level (parental control level). For information on the
parental control level of each disc, refer to the instruction
on its jacket.
STANDBY/ON
1 to 7: Users cannot play a disc that is rated above the level
without entering the password. (The smaller the number, the
stricter the Parental Control level.)
8 ADULT (Default setting): Users can play all discs
without entering the password.
4
POWER
TV
Number
keys
1
2
3
4
5
6
7
8
SCAN
DIMMER
9
0
Notes
PROG
MODE
PTY SEEK
ON SCREEN
START
y
SHUFFLE
PRESET
MENU
INFO.
A-E
SET UP
ENTER
A-E
TOP MENU
/RETURN
Cursor keys,
ENTER
• To return to the previous menu, press . To exit from the setup
menu, press SET UP.
• To unlock the parental control temporarily for playback, use the
number keys to enter the password in the password input area
(displayed when the locked disc is loaded), and then press
ENTER.
BASIC
OPERATIONS
FREQ/TEXT
TV INPUT
Press the number buttons to enter the 6-digit
password, and then press ENTER.
• The default password is “000000”. To change the password,
carry out the “Changing the password” procedure (see page 36).
• If you forget your password, enter “000000” instead of your
password.
A-B
REPEAT
TV CH
Press
or
to select a parental control
level, and then press ENTER.
SET UP
1
Press SET UP.
2
Press
or
to select “PREFERENCE
PAGE”, press
or
to select
“PARENTAL”, and then press .
PREFERENCE PAGE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
VR LIST
MP3/JPEG NAV
DIVX SUBTITLE
PASSWORD
1 KIDS SAFE
2G
3 PG
4 PG 13
5 PGR
6R
7 NC 17
8 ADULT
Note
“PREFERENCE PAGE” is available only when no disc is
loaded or the DVD player is in the Stop mode (see page 25).
English
35 En
Restricting Disc Playback
Locking a disc
Changing the password
You can prevent up to 40 specific discs from playback by
locking the discs.
Follow the procedure below to change the password to
access locked disc temporarily.
1
While the disc to be locked is loaded into the
unit, press SET UP.
1
Press SET UP.
The setup menu appears on the TV screen.
2
Press
or
to select “GENERAL SETUP
PAGE”, press
or
to select “DISC
LOCK”, and then press .
2
Press
or
to select “PREFERENCE
PAGE”, press
or
to select
“PASSWORD”, then press .
3
Press
or
press ENTER.
Note
to select “LOCK”, and then
To disable a lock applied to a disc
Select “UNLOCK” in step 3.
“PREFERENCE PAGE” is available only when no disc is
loaded or the DVD player is in the Stop mode (see page 25).
3
Press ENTER to display the Password
change screen.
4
Use the number keys to enter the current
6-digit password in the “OLD PASSWORD”
area, enter the new 6-digit password in the
“NEW PASSWORD” and “CONFIRM PWD”
areas, then press ENTER.
y
• To return to the previous menu, press . To exit from the setup
menu, press SET UP.
• To unlock the disc lock temporarily for playback, use the
number keys to enter the password in the password input area
(displayed when the locked disc is loaded), and then press
ENTER.
Notes
• The default password is “000000”.
• If you forget your password, enter “000000” instead of your
password.
y
To return to the previous menu, press
menu, press SET UP.
36 En
. To exit from the setup
FM/AM Tuning
There are 2 tuning methods: automatic and manual. Automatic tuning is effective when station signals are strong and
there is no interference. If the signal from the station you want to select is weak, tune into it manually. You can also use
the automatic and manual preset tuning features to store up to 40 stations (A1 to E8: 8 preset station numbers in each of
the 5 preset station groups).
Automatic tuning
Manual tuning
Automatic tuning is effective when station signals are
strong and there is no interference.
If the signal received from the station you want to select is
weak, tune into it manually.
AUTO/MAN’L PRESET/TUNING u / d
AUTO/MAN’L PRESET/TUNING u / d
NATURAL SOUND STEREO RECEIVER RX-E810
NATURAL SOUND STEREO RECEIVER RX-E810
PURE DIRECT
TIMER
DISPLAY
STANDBY/ON
BASS
MEMORY
AUTO/MAN'L
PRESET/BAND
PURE DIRECT
PRESET/TUNING
VOLUME
TIME ADJ
TIMER
TREBLE
HOUR
TIMER
DISPLAY
STANDBY/ON
BASS
MEMORY
TIME ADJ
PHONES
AUTO/MAN'L
PRESET/BAND
PRESET/TUNING
VOLUME
MIN
INPUT
BALANCE
TIMER
TREBLE
HOUR
MIN
INPUT
BALANCE
PHONES
L
R
L
MIN
PRESET/BAND
R
MAX
MIN
PRESET/BAND
INPUT
Rotate INPUT on the front panel of the receiver
to select “TUNER” as an input source.
2
Press PRESET/BAND repeatedly to select
“FM” or “AM”.
1
Rotate INPUT on the front panel of the receiver
to select “TUNER” as an input source.
2
Press PRESET/BAND to select “FM” or “AM”.
y
When the preset indicator lights up, the receiver is in the
preset mode. For details, see pages 38 and 39.
y
When the preset indicator lights up, the receiver is in the
preset mode. For details, see pages 38 and 39.
3
Press AUTO/MAN’L so that the AUTO
indicator lights up in the front panel display.
4
Press PRESET/TUNING u / d to begin
automatic tuning.
When the reciever is tuned into a station, the TUNED
indicator lights up and the frequency of the received
station is shown in the front panel display.
• Press u to tune into a higher frequency.
• Press d to tune into a lower frequency.
INPUT
3
Press AUTO/MAN’L so that the AUTO
indicator disappears from the front panel
display.
4
Press PRESET/TUNING u / d to tune into the
desired station manually.
Hold down the button to continue searching.
TUNER
OPERATIONS
1
MAX
English
37 En
FM/AM Tuning
■ To switch the frequency step
(Asia and Taiwan models only)
Automatic preset tuning
Because the interstation frequency spacing differs in
different areas, you may need to switch the frequency step
mode.
Follow the procedure below to preset radio stations
automatically.
NATURAL SOUND STEREO RECEIVER RX-E810
PURE DIRECT
NATURAL SOUND STEREO RECEIVER RX-E810
PURE DIRECT
TIMER
DISPLAY
STANDBY/ON
BASS
MEMORY
TIMER
MEMORY
AUTO/MAN'L
PRESET/BAND
PRESET/TUNING
VOLUME
TIME ADJ
BASS
STANDBY/ON
TIMER
TREBLE
HOUR
AUTO/MAN'L
PRESET/BAND
PRESET/TUNING
VOLUME
TIME ADJ
DISPLAY
TIMER
TREBLE
HOUR
MIN
INPUT
BALANCE
PHONES
MIN
INPUT
BALANCE
L
PHONES
R
MIN
L
MAX
R
MIN
MAX
MEMORY INPUT
STANDBY/ON
1
PRESET/BAND
While the receiver is in the standby mode,
hold down PRESET/BAND on the front panel,
and then press STANDBY/ON.
The receiver turns on.
2
Press PRESET/BAND repeatedly to select
“FM 50k/AM 9k” or “FM 100k/AM 10k”.
3
To confirm the setting, press STANDBY/ON.
1
Rotate INPUT on the front panel of the receiver
to select “TUNER” as an input source.
2
Hold down MEMORY for more than two
seconds.
The AUTO and MEMORY indicator flash in the front
panel display.
• Auto Preset starts at the lowest frequency toward
the highest frequency.
• The receiver automatically applies a preset number
to each detected station.
Notes
• You can preset up to 40 of AM and FM stations by automatic
preset tuning.
• (U.K. and Europe models only)
Only Radio Data System broadcasting stations and AM stations
are stored automatically by automatic preset tuning.
38 En
FM/AM Tuning
Manual preset tuning
Selecting preset stations
You can also store up to 40 stations (A1 to E8: 8 preset
station numbers in each of the 5 preset station groups)
manually.
You can tune into any desired station simply by selecting
the preset station group and number under which it was
stored (see page 38).
PRESET/TUNING u / d
NATURAL SOUND STEREO RECEIVER RX-E810
PURE DIRECT
TIMER
DISPLAY
STANDBY/ON
BASS
MEMORY
AUTO/MAN'L
PRESET/BAND
NATURAL SOUND STEREO RECEIVER RX-E810
PRESET/TUNING
VOLUME
TIME ADJ
TIMER
TREBLE
HOUR
MIN
PURE DIRECT
INPUT
BALANCE
PHONES
DISPLAY
TIMER
L
MEMORY
AUTO/MAN'L
PRESET/BAND
PRESET/TUNING
VOLUME
R
MIN
TIME ADJ
MAX
BASS
STANDBY/ON
TIMER
TREBLE
HOUR
MIN
INPUT
BALANCE
PHONES
L
MEMORY
Tune into a radio station you want to preset.
See page 37 for tuning instructions.
2
Press MEMORY.
The MEMORY indicator flashes in the front panel
display for about 5 seconds.
MAX
Hold down PRESET/TUNING u / d to select
a preset station group (A to E) while the
MEMORY indicator is flashing.
1
Rotate INPUT on the front panel of the receiver
to select “TUNER” as an input source.
2
Press PRESET/BAND repeatedly so that the
preset indicator lights up in the front panel
display.
3
Hold down PRESET/TUNING u / d to select
a preset station group (A to E), and then
press PRESET/TUNING u / d repeatedly to
select a preset station number (1 to 8).
Press PRESET/TUNING u / d repeatedly to
select a preset station number (1 to 8) while
the MEMORY indicator is flashing.
TUNER
OPERATIONS
4
MIN
PRESET/BAND INPUT
1
3
R
PRESET/TUNING u / d
y
5
6
Press MEMORY while the MEMORY indicator
is flashing.
The PRESET and MEMORY indicators light up in
the front panel display.
Repeat steps 1 to 5 until all desired stations
are preset.
You can also use the remote control to select preset stations.
While the remote control is in the TUNER mode (see page 8),
press BAND repeatedly to select “PRESET”. To select a preset
station group (A to E), press A-E
/
repeatedly. To select a
preset station number (1 to 8), press PRESET
repeatedly or use the number keys (1 to 8).
/
English
39 En
Radio Data System Tuning (U.K. and Europe Models Only)
Radio Data System Tuning (U.K. and Europe Models Only)
Radio Data System (U.K. and Europe models only) is a data transmission system used by FM stations in many countries.
The Radio Data System function is carried out among the network stations. This unit can receive various Radio Data
System data such as PS (program service), PTY (program type), RT (radio text), CT (clock time), and EON (enhanced
other networks) when receiving Radio Data System broadcasting stations.
Selecting the Radio Data System
program
Use this feature to select one of the 15 Radio Data System
program types and search for all the available preset
stations of the selected program type.
TV CH
FREQ/TEXT
PROG
MODE
PTY SEEK
TV INPUT
SHUFFLE
PTY SEEK
START
PRESET
MENU
INFO.
A-E
ENTER
A-E
TOP MENU
/RETURN
SET UP
TV VOL
/
VOLUME
SLEEP
DVD/CD
TUNER
BAND
TAPE/MD
AUX/TV
DOCK
1
2
ZOOM
TUNER
AUDIO
Set the receiver to the “FM” tuning mode.
See page 37 for tuning instructions.
Press PTY SEEK MODE to set the receiver to
the PTY SEEK mode.
The PTY indicator and the name of the program type
flash in the front panel display of the receiver.
y
• To cancel the PTY SEEK mode, press PTY SEEK MODE
once again.
• The PTY SEEK mode is automatically cancelled if you do
not operate any key for about 20 seconds.
40 En
Program type
Descriptions
NEWS
News
AFFAIRS
Current affairs
INFO
General information
SPORT
Sports
EDUCATE
Education
DRAMA
Drama
CULTURE
Culture
SCIENCE
Science
VARIED
Light entertainment
POP M
Popular music
ROCK M
Rock music
M.O.R. M
Middle-of-the-road music (easylistening)
LIGHT M
Light classics
CLASSICS
Serious classics
OTHER M
Other music
PRESET
DISPLAY
SUBTITLE ANGLE
Press PRESET
/
repeatedly to select
the desired program type.
The name of the selected program type appears in the
front panel display.
START
PTY SEEK
MODE
ON SCREEN
3
Radio Data System Tuning (U.K. and Europe Models Only)
4
Press PTY SEEK START to start searching
for available Radio Data System preset
stations.
If a station broadcasting the selected program type is
found, the receiver stops searching, and then program
service name and the PTY HOLD indicator lights up
in the front panel display.
If there is no station broadcasting the selected
program type, the frequency currently selected
appears.
REPEAT
TV CH
A-B
FREQ/TEXT
PROG
MODE
PTY SEEK
TV INPUT
ON SCREEN
FREQ/TEXT
START
SHUFFLE
PRESET
MENU
INFO.
A-E
ENTER
A-E
TOP MENU
/RETURN
SET UP
TV VOL
VOLUME
DISPLAY
y
To stop searching for stations, press PTY SEEK START
once again.
5
Repeat step 4 until the desired station is
found.
Displaying the Radio Data System
information
Use this feature to display the 4 types of the Radio Data
System information: PS (program service), PTY (program
type), RT (radio text) and CT (clock time). The
corresponding indicators light up in the front panel
display.
• You can select one of the Radio Data System modes only when
the corresponding Radio Data System indicator lights up in the
front panel display. It may take a while for the receiver to
receive all of the Radio Data System data from the station.
• You can select only the available Radio Data System modes
being offered by the station.
• If the signals being received are not strong enough, the receiver
may not be able to utilize the Radio Data System data. In
particular, the “RT” mode requires a large amount of data and
may not be available even when the other Radio Data System
modes are available.
• In case of poor reception conditions, press AUTO/MAN’L on
the front panel of the receiver so that the AUTO indicator
disappears from the front panel display.
• If the signal strength is weakened by external interference while
the receiver is receiving the Radio Data System data, the
reception may be cut off unexpectedly and “...WAIT” appears in
the front panel display.
• When the “RT” mode is selected, the receiver can display the
program information by a maximum of 64 alphanumeric
characters, including the umlaut symbol. Unavailable characters
are displayed with the “_” (underscore).
DVD/CD
TUNER
BAND
TAPE/MD
AUX/TV
DOCK
TUNER
While tuning into a Radio Data System station,
press FREQ/TEXT repeatedly to select the
desired Radio Data System display mode.
PS
PTY
RT
CT
Frequency
• Select “PS” to display the name of the Radio Data
System program currently being received.
• Select “PTY” to display the type of the Radio Data
System program currently being received.
• Select “RT” to display the information on the
Radio Data System program currently being
received.
• Select “CT” to display the current time.
TUNER
OPERATIONS
Notes
SLEEP
English
41 En
Radio Data System Tuning (U.K. and Europe Models Only)
■ Additional CT (clock time) settings
You can use CT information received from the Radio Data
System stations to adjust the built-in clock of the receiver.
STANDBY/ON
3
POWER
CT→Clock
Set this to “ON” if you want to apply CT information
received from the Radio Data System stations to the
built-in clock of the receiver. (The default setting is
“ON”.)
Local CT
Set this to “ON” if you want to apply the daylight
saving time or summer time to CT information
received from the Radio Data System stations. (The
default setting is “ON”.)
TV
1
2
5
6
9
3
4
7
8
SCAN
DIMMER
0
A-B
REPEAT
TV CH
FREQ/TEXT
PROG
MODE
PTY SEEK
TV INPUT
ON SCREEN
SHUFFLE
PRESET
FREQ/TEXT
START
PTY SEEK START
PTY SEEK MODE
MENU
4
INFO.
A-E
ENTER
A-E
TOP MENU
/RETURN
SET UP
TV VOL
VOLUME
DISPLAY
DISPLAY
SLEEP
DVD/CD
TUNER
BAND
TAPE/MD
AUX/TV
DOCK
SUBTITLE ANGLE
ZOOM
TUNER
AUDIO
1
While tuning into a Radio Data System
station, press DISPLAY repeatedly so that the
clock appears in the front panel display of
the receiver.
2
Press FREQ/TEXT once.
“CT→Clock” appears in the front panel display.
42 En
Press PTY SEEK MODE repeatedly to select
“CT→Clock” or “Local CT”, and then press
PTY SEEK START to switch the setting
between “ON” and “OFF”.
Press FREQ/TEXT to confirm the settings.
Setting the Timer
The receiver is equipped with 2 types of timer functions: clock timer and sleep timer. The clock timer automatically turns
the receiver on or sets it to the standby mode at the specified time. The sleep timer sets the receiver to the standby mode
after the specified time elapses. The DVD player also turns on or sets to the standby mode automatically if it is connected
to the receiver using a system control connection (see page 12).
Setting the clock timer
The clock timer automatically turns the receiver on or sets
it to the standby mode at the specified time. You can also
specify an input which the receiver automatically selects
when the clock timer turns it on.
Notes
• You cannot set the clock timer unless you adjust the clock (see
page 19).
• If you do not touch any key for more than 30 seconds after the
previous key operation, the operations you made are cleared
from the memory and the normal display reappears.
TIMER LED
TIMER
PRESET/BAND
PURE DIRECT
TIMER
MEMORY
AUTO/MAN'L
PRESET/BAND
Press DISPLAY again to select “OFF Time”,
and then specify the time when you want to
turn off the receiver as well as step 4.
6
To turn off the receiver now with the clock
timer set, press TIMER.
TIMER LED lights up. The receiver will be turned on
or set to the standby mode automatically at the
specified time.
y
If you want to turn off the receiver by “OFF Time”, press
DISPLAY repeatedly to display the clock in the front panel
display, and then press TIMER. The TIMER indicator lights
up in the front panel display.
To set or cancel the clock timer
Press TIMER on the front panel while the clock is
displayed or the receiver is in the standby mode.
NATURAL SOUND STEREO RECEIVER RX-E810
DISPLAY
5
PRESET/TUNING
VOLUME
TIME ADJ
BASS
STANDBY/ON
TIMER
TREBLE
HOUR
MIN
INPUT
BALANCE
PHONES
L
R
MIN
DISPLAY
MAX
INPUT
2
Rotate INPUT to select an input which the
receiver automatically selects when the clock
timer turns it on.
If you select “TUNER”, you can select a band by
pressing PRESET/BAND. To select a preset station,
carry out steps 2 and 3 in the “Selecting preset
stations” procedure (see page 39).
3
Press DISPLAY again to select “ON Time”.
4
Specify the time when you want to turn on
the receiver.
Carry out the steps 3 and 4 in “Step 2: Adjust the
clock” (see page 19) to adjust the hour and minute
settings.
English
Press DISPLAY on the front panel of the
receiver repeatedly to select “Timer Input”.
The TIMER indicator flashes in the front panel
display.
OTHER
OPERATIONS
1
43 En
Setting the Timer
Setting the sleep timer
The sleep timer sets the receiver to the standby mode after
the specified time elapses.
A-E
ENTER
A-E
TOP MENU
/RETURN
SET UP
TV VOL
VOLUME
DISPLAY
SLEEP
SLEEP
DVD/CD
TUNER
BAND
TAPE/MD
AUX/TV
DOCK
SUBTITLE ANGLE
ZOOM
AUDIO
Press SLEEP repeatedly to select the desired
duration.
Each time you press the key, the duration changes as
follows.
The SLEEP indicator lights up in the front panel display.
SLEEP 120 min.
SLEEP 90 min.
SLEEP 60 min.
SLEEP 30 min.
SLEEP OFF
y
• The sleep timer is canceled if you set the receiver to the standby
mode.
• If you press SLEEP once while the sleep timer is set, the
ongoing duration appears in the front panel display.
To cancel the sleep timer
Press SLEEP repeatedly to select “SLEEP OFF”.
44 En
Setting the auto-standby mode
You can turn on/off the auto-standby feature which automatically set the system to the standby mode if you do not
operate the system for 30 minutes while the receiver is set to the DVD/CD input mode. (The default setting is “AUTO
STANDBY ON”.)
Notes
• Unless you connect the receiver and the DVD player properly with the supplied system control cable (see page 12), this feature does
not function for the system.
• This feature does not function for the system during playback.
u/d
NATURAL SOUND STEREO RECEIVER RX-E810
PURE DIRECT
TIMER
DISPLAY
STANDBY/ON
BASS
MEMORY
AUTO/MAN'L
PRESET/BAND
PRESET/TUNING
VOLUME
TIME ADJ
TIMER
TREBLE
HOUR
MIN
INPUT
BALANCE
PHONES
L
R
MIN
MEMORY
MAX
INPUT
Rotate INPUT on the front panel of the
receiver to select “DVD/CD” as an input
source.
2
Press MEMORY.
The current setting appears in the receiver’s front
panel display for about five seconds.
3
While the current setting is displayed in the
front panel display, press u or d to switch
between “AUTO STANDBY ON” or “AUTO
STANDBY OFF”.
4
Press MEMORY or wait for five seconds
without any operation to confirm the setting.
OTHER
OPERATIONS
1
English
45 En
CONTROLLING EXTERNAL COMPONENTS
Controlling External Components
In addition to controlling the receiver (RX-E810) and DVD player (DVD-E810), you can operate the specific functions
for external components made by YAMAHA or an iPod connected with a YAMAHA iPod universal dock (such as
YDS-10 sold separately) using the supplied remote control. To control a TV made by other manufactures, you need to set
up the appropriate remote control code (see page 48).
Note
Depending on the product, the remote control may not be able to operate the external component. In this case, use the remote control
supplied with the product.
Available operations
■ AUX/TV mode
Operations available in AUX/TV mode
The following operations are available for the TV if you
set up the appropriate remote control code (see page 48).
STANDBY/ON
POWER
TV
1
1
2
3
4
5
6
7
8
SCAN
DIMMER
9
0
MODE
PTY SEEK
TV INPUT
ON SCREEN
START
SHUFFLE
PRESET
MENU
ENTER
A-E
INFO.
A-E
TOP MENU
/RETURN
SET UP
TV VOL
VOLUME
DISPLAY
3
SLEEP
DVD/CD
TUNER
BAND
TAPE/MD
AUX/TV
DOCK
SUBTITLE ANGLE
46 En
1 TV CH +/–
Switches the TV channels.
FREQ/TEXT
PROG
2
ZOOM
y
Press AUX/TV to set the remote control to the AUX/TV
mode before carrying out the following operations.
A-B
REPEAT
TV CH
4
AUDIO
5
2 TV INPUT
Switches the TV inputs.
3 TV VOL +/–
Adjusts the TV volume level.
4 POWER TV
Turns the TV on, or set it to the standby mode.
5 PROG
Use to set a remote control code.
Controlling External Components
■ DOCK mode
STANDBY/ON
0 Cusor keys (
/
/
/ ), ENTER
Press to return to the upper level in the iPod menu.
Press
or
to select an item in the selected group.
Press
or ENTER to enter the selected group. (Pressing
ENTER starts playback when a song is selected.)
POWER
TV
1
2
3
5
6
7
8
SCAN
DIMMER
9
1
4
0
5
TV CH
STANDBY/ON
A-B
REPEAT
POWER
TV
FREQ/TEXT
PROG
2
MODE
PTY SEEK
TV INPUT
START
SHUFFLE
3
4
■ TAPE mode
ON SCREEN
PRESET
MENU
INFO.
A-E
SET UP
TV VOL
ENTER
A-E
6
7
8
1
2
3
5
6
7
8
SCAN
DIMMER
9
9
4
0
A-B
REPEAT
1
0
TOP MENU
/RETURN
TV CH
FREQ/TEXT
PROG
MODE
2
PTY SEEK
TV INPUT
START
SHUFFLE
3
VOLUME
ON SCREEN
Operations available in DOCK mode
PRESET
MENU
INFO.
The following operations are available for the iPod
connected with a YAMAHA iPod universal dock (such as
YDS-10 sold separately). For details on iPod operations,
see “Using iPod” on page 49.
A-E
SET UP
TV VOL
ENTER
4
5
A-E
6
TOP MENU
/RETURN
VOLUME
y
Operations available in TAPE mode
Press DOCK to set the remote control to the DOCK mode before
carrying out the following operations.
The following operations are available for the tape deck
made by YAMAHA.
1 s
Stops playback.
y
2 e
Pauses playback.
4 INFO.
Switches between the simple remote mode and menu
browse mode.
5 REPEAT
Selects the repeat playback mode during playback in the
menu browse mode.
6 SHUFFLE
Selects the shuffle playback mode during playback in the
menu browse mode.
7 h
Starts playback.
8 a
Skips to the next track. Press and hold to fast forward.
1 s
Stops playback.
2 e
Pauses recording.
OTHER
OPERATIONS
3 b
Skips to the previous track. Press and hold to fast reverse.
Press TAPE/MD to set the remote control to the TAPE mode
before carrying out the following operations.
3 b
Fast reverses.
4 h
Starts playback.
5 a
Fast forwards.
6 Cursor keys (
/
/
/ )
Press
to play back the front side of the tape, and
to play back the back side.
Press to start recording on the tape deck.
Press
to play back both sides of the tape in sequence.
English
9 MENU
Returns to the upper level in the iPod menu.
47 En
Controlling External Components
Setting remote control codes
You can control TVs made by other manufactures by
setting the appropriate remote control code (refer to “LIST
OF REMOTE CONTROL CODES” at the end of this
manual). Follow the procedures below to set the remote
control code.
STANDBY/ON
1
Press AUX/TV to set the remote control to the
AUX/TV mode.
2
While holding down PROG, press AUX/TV,
and then use the number keys to enter the
three-digit remote control code (refer to
“LIST OF REMOTE CONTROL CODES” at the
end of this manual) for the manufacturer of
your TV.
3
See “AUX/TV mode” on page 46 and try one
of the key operations for your TV to check
that the setting is working properly.
If the key operation does not work properly, the
remote control code may be incorrect. In this case,
perform step 2 again.
POWER
TV
1
2
3
4
5
6
7
8
SCAN
DIMMER
9
Number
keys
0
A-B
REPEAT
TV CH
FREQ/TEXT
PROG
MODE
PTY SEEK
TV INPUT
PROG
START
SHUFFLE
Notes
ON SCREEN
PRESET
MENU
ENTER
A-E
• Even if you set a remote control code, it will be cleared about
two minutes after the remote control batteries run out. In this
case, store remote control codes again after replacing the
batteries. (Be careful not to press the remote control keys while
replacing the batteries. Doing so may clear the settings.)
• If the manufacturer of your component has more than one code,
try each of them until you find the correct one.
INFO.
A-E
TOP MENU
/RETURN
SET UP
TV VOL
VOLUME
DISPLAY
SLEEP
DVD/CD
TUNER
BAND
TAPE/MD
AUX/TV
DOCK
SUBTITLE ANGLE
48 En
ZOOM
AUDIO
AUX/TV
Controlling External Components
Using iPod
Once you have stationed your iPod in a YAMAHA iPod universal dock (such as YDS-10 sold separately) connected to
the DOCK terminal of the receiver (see page 17), you can enjoy playback of your iPod using the supplied remote control.
The operations of your iPod are available with the aid of the receiver’s front panel display (menu browse mode) or
without it (simple remote mode).
Notes
• Only iPod (Click and Wheel), iPod nano, and iPod mini are supported.
• Some features may not be compatible depending on the model or the software version of your iPod.
y
• For a complete list of the remote control functions used to control your iPod, refer to “DOCK mode” (see page 47) .
• For a complete list of status messages that appear in the front panel display, refer to the “iPod” section in “Troubleshooting” (see
page 60).
STANDBY/ON
1
Press DOCK to select the iPod as the input
source.
2
Press INFO. to switch between the simple
remote mode and menu browse mode.
POWER
TV
1
2
3
4
5
6
7
8
SCAN
DIMMER
9
0
TV CH
Simple remote mode
• View the screen of the iPod to control the menu.
• Operate the iPod using the iPod controls or the
supplied remote control.
A-B
REPEAT
FREQ/TEXT
PROG
MODE
PTY SEEK
TV INPUT
START
SHUFFLE
h
ON SCREEN
PRESET
Menu browse mode
• View the front panel of the receiver to control the
menu.
• Operate the iPod using the supplied remote control.
• You can configure the “Setup” parameters of the
iPod.
MENU
INFO.
INFO.
A-E
ENTER
A-E
TOP MENU
/RETURN
SET UP
TV VOL
Cursor keys,
ENTER
VOLUME
DISPLAY
3
SLEEP
TUNER
BAND
AUX/TV
DOCK
DOCK
SUBTITLE ANGLE
ZOOM
AUDIO
y
OTHER
OPERATIONS
DVD/CD
TAPE/MD
Use the cursor keys to operate the iPod
menu, and then press h to start playback of
the selected song (or group).
For details on how to operate the iPod menu with the
menu browse mode, refer to “Menu browse mode”
(see page 50).
In the simple remote mode, you can also use the iPod controllers
to operate the menu.
English
49 En
Controlling External Components
■ Menu browse mode
In the menu browse mode, you can operate the iPod menu
using the receiver’s front panel display. Also you can
configure the “Setup” parameters with the menu browse
mode.
2
Note
Press
or
to select the menu, and then
press
or ENTER to enter the selected
menu.
The name of the first item stored in the selected menu
appears.
There are some characters that cannot be displayed in the front
panel display of the receiver. Those characters are replaced with
underscore “_”.
DOCK
iPod menu
DOCK
ARTISTS
y
• The iPod menu indicators (see page 5) show the iPod menu
currently selected.
• To return to the upper level in the iPod menu, press
MENU.
1
Select the menu browse mode (see page 49).
The top of the iPod menu appears in the front panel
display.
3
DOCK
iPod operation indicators
or
Repeat step 2 until you select the desired
item, and then press h to start playback of
the desired item (group or song).
If you select “Setup” in step 2, press
or
to select the desired setup menu, and
then press ENTER repeatedly to configure
the parameter.
y
Setup menu
The iPod operation indicators (see page 5) show the operable
cursor keys in each step.
Shuffle: Off, Songs (Shuffle Play by song), Albums
(Shuffle Play by album)
Repeat: Off, One (Repeat Play by song), ALL (Repeat
Play by selected group)
FL Scroll: Cont (Scrolls the song name continuously,
default setting), Once (Scrolls the song name
once)
y
While playing back a track (or group) with the menu browse
mode, you can switch the playback information (such as song
name, elapsed time, artist name, or album name) displayed in the
front panel display by pressing
50 En
or
.
Configuring the DVD Player Settings (Setup Menu)
In the setup menu, you can configure the various
parameters or operate useful functions related to the DVD
player. Follow the procedure below to operate the setup
menu. For details on each menu or available parameters,
see “Setup menu items” on page 52.
STANDBY/ON
Press DVD/CD to set the remote control to
the DVD/CD mode.
2
Press SET UP.
The setup menu appears on the TV screen.
3
Press
or
to select “GENERAL SETUP
PAGE”, “AUDIO SETUP PAGE”, “VIDEO
SETUP PAGE” or “PREFERENCE PAGE”.
POWER
TV
Number
keys
1
1
2
3
5
6
9
0
4
7
8
SCAN
DIMMER
Note
A-B
REPEAT
TV CH
FREQ/TEXT
“PREFERENCE PAGE” is available only when no disc is
loaded or the the DVD player is in the Stop mode (see
page 25).
PROG
MODE
PTY SEEK
TV INPUT
ON SCREEN
START
SHUFFLE
PRESET
MENU
4
Press
or
to select the desired menu,
and then press .
If the selected menu contains one submenu, press
ENTER.
If the selected menu contains two or more submenus,
press
or
to select the desired submenu, and
then press ENTER.
5
Press
or
to select the desired
parameter, and then press ENTER.
For configuring some parameters, you need to enter
the password by pressing the number keys.
INFO.
A-E
ENTER
A-E
TOP MENU
/RETURN
SET UP
Cursor keys,
ENTER
SET UP
TV VOL
VOLUME
DISPLAY
SLEEP
DVD/CD
TUNER
BAND
TAPE/MD
AUX/TV
DOCK
DVD/CD
SUBTITLE ANGLE
ZOOM
AUDIO
y
. To exit from the setup
OTHER
OPERATIONS
To return to the previous menu, press
menu, press SET UP.
English
51 En
Configuring the DVD Player Settings (Setup Menu)
Setup menu items
The following table explains details on the setup menu items of the DVD player. For instructions on operating the setup
menu, see “Configuring the DVD Player Settings (Setup Menu)” on page 51.
Page
Menu
GENERAL
DISC LOCK
SETUP PAGE
PROGRAM
Submenu
See page 36 for details. (Default: UNLOCK)
INPUT MENU See page 29 for details.
OSD LANGUAGE
See page 20 for details. (Default: ENGLISH)
SCREEN SAVER
The screen saver function allows you to prevent the TV screen from burn-in.
(Default: ON)
ON:
Turns on the screen saver when disc playback is stopped or paused for more than 15
minutes.
OFF:
Disables the screen saver function.
DIVX(R) VOD CODE
You can display the DivX® VOD (Video On Demand) registration code that allows
you to rent or purchase videos using the DivX® VOD service. For more information,
visit the website at www.divx.com/vod.®
AUDIO
ANALOG OUTPUT
SETUP PAGE
DIGITAL
AUDIO
52 En
Parameter
You can configure the analog output setting. (Default: STEREO)
STEREO:
Delivers sounds from only the two front speaker channels.
LT/RT:
Delivers sounds from the multi speaker channels if the DVD player is connected to a
Dolby Pro Logic decorder using an analog connection.
VIRTUAL SURR:
Reproduces the surround channel sounds virtually.
DIGITAL
OUTPUT
You can configure the digital output setting according to your optional audio
equipment connections. (Default: ALL)
OFF:
Disables the digital output.
ALL:
Select this if you connect the DVD player to a multi-channel decoder/amplifier using a
digital connection.
PCM ONLY:
Select this if your amplifier is not capable of decoding multi-channel audio.
LPCM
OUTPUT
If you connect the DVD player to a PCM compatible amplifier using a digital
connection, configure the LPCM output setting. The higher the sampling rate, the
better the sound quality.
(Default: 48KHz)
48KHz:
Plays back a disc recorded at the sampling rate of 48 kHz.
96KHz:
Plays back a disc recorded at the sampling rate of 96 kHz.
Configuring the DVD Player Settings (Setup Menu)
Page
Menu
Submenu
AUDIO
CD UPSAMPLING *1
SETUP PAGE
Parameter
You can convert your music CD to a higher sampling rate using sophisticated digital
signal processing for better sound quality. If you have activated the upsampling, the
DVD player will automatically switch to the stereo mode. (Default: OFF)
OFF:
Disables the CD upsampling function.
88.2kHz (X2):
Converts the sampling rate of the CDs twice higher than original.
176.4kHz (X4):
Converts the sampling rate of the CDs four times higher than original.
NIGHT MODE
You can soften the high volume output and enhance the low volume output to an
audible level. This setting is effective only when a Dolby Digital 2-channel source is
played back. (Default: OFF)
ON:
Enables the night mode.
OFF:
Disables the night mode.
LIP SYNC
You can adjust the delay time (00 to 200 ms) for the sound output in order to
synchronize it with video image. (Press
or
to adjust the delay time and then
press ENTER to confirm adjustment.) (Default: 00 ms)
VIDEO
TV TYPE *3
SETUP PAGE
*2
TV DISPLAY
You can set the color system of the DVD player according to the TV. (Default: NTSC
for U.S.A. and Canada models, MULTI for Korea model, and PAL for other models)
PAL:
Select this if the TV connected to the DVD player adopts the PAL system.
NTSC:
Select this if the TV connected to the DVD player adopts the NTSC system.
MULTI:
Select this if the TV connected to the DVD player is compatible with both PAL and
NTSC (such as a multi-system TV).
*1
“CD UPSAMPLING” is available only when a music CD is loaded in the DVD player.
The video settings of your TV also affect the display image. Make sure you configure the video settings of your TV as well as these
settings.
*3 If the picture is distorted on your TV, the color system (NTSC and PAL) setting of the DVD player may not match your TV. To switch
*2
the color system setting in such case, press
OTHER
OPERATIONS
You can set the aspect ratio of the DVD player according to the TV. When the selected
format is not available on the disc, this setting will not affect the disc playback.
(Default: 4:3 PAN SCAN)
4:3 PAN SCAN:
Select this if you have a normal TV and want both sides of the picture to be trimmed
or formatted to fit your TV screen.
4:3 LETTER BOX:
Select this if you have a normal TV. In this case, a wide picture with black bands on
the upper and lower portions of the TV screen will be displayed.
16:9:
Select this if you have a wide-screen TV.
and then AUDIO while the disc tray is open.
English
53 En
Configuring the DVD Player Settings (Setup Menu)
Page
Menu
Submenu
VIDEO
PROGRESSIVE *4
SETUP PAGE
*2
PICTURE SETTING
Parameter
When connecting the DVD player to a progressive scan compatible TV using a
component video connection, you can enjoy high-quality DVD video with the
progressive scan mode. (Default: OFF)
ON:
Enables the progressive scan.
OFF:
Disables the progressive scan.
You can select the picture color setting from three predefined sets or configure in
detail. (Default: STANDARD)
STANDARD:
Uses standard TV picture settings.
BRIGHT:
Makes the TV picture brighter.
SOFT:
Makes the TV picture softer.
PERSONAL:
You can adjust Brightness, Contrast, Tint and Color (saturation) individually. (Press
or
to select an item, press
or
to adjust the parameter, then press
ENTER to confirm the adjustment.)
COMPONENT
(U.K. and Europe models
only)
You can switch the jack (terminal) at which the component video signals are output
between the COMPONENT jacks and AV terminal. (Default: RGB)
YUV:
Select this if you connect the TV to the COMPONENT jacks.
RGB:
Select this if you connect the TV to the AV terminal (scart).
BLACK LEVEL
(U.S.A. and Canada models
only)
You can set the black level to improve color contrast during disc playback. This setting
is effective only when “TV TYPE” is set to “NTSC”. (Default: OFF)
ON:
Select this to enhance the black level.
OFF:
Select this for the standard black level setting.
CLOSED CAPTION
(U.S.A. and Canada models
only)
Closed captions are data hidden in the video signals of specific discs, and are invisible
without the use of a special decorder. The difference between subtitles and captions is
that subtitles are intended for hearing persons and captions are for the hearing
impaired. Subtitles rarely show all of the audio. For example, captions show sound
effects (e.g., “phone ringing” and “footsteps”), while subtitles do not. Before you
select this function, please ensure that the disc contains closed caption information
and your TV set also supports this funcion. (Default: OFF)
ON:
Enables the closed caption function.
OFF:
Disables the closed caption function.
*2
The video settings of your TV also affect the display image. Make sure you configure the video settings of your TV as well as these
settings.
*4 The progressive scan mode is only available if you connect the player to a progressive scan compatible TV using a component video
connection. For U.K. and Europe models, “PROGRESSIVE” is available only when you connect a TV with a component video
connection and “COMPONENT” is set to “YUV”.
To set this parameter to “OFF” without using the Setup menu, open the disk tray, press
54 En
on the remote control and then press ANGLE.
Configuring the DVD Player Settings (Setup Menu)
Page
Menu
Submenu
PREFERENCE AUDIO
PAGE *5
SUBTITLE
See page 21 for details. (Default: ENGLISH)
See page 21 for details. (Default: OFF)
DISC MENU
See page 21 for details. (Default: ENGLISH)
PARENTAL
See page 35 for details. (Default: 8 ADULT)
VR LIST
You can select the original list or play list used for playback of VR (Video Recording)
format discs. (Default: ORIGINAL LIST)
ORIGINAL LIST:
Select this to play the originally recorded titles on the disc.
PLAY LIST:
Select this to play the edited version of the disc. (This feature is available only when a
play list has been created.)
MP3/JPEG NAV
You can enable or disable the navigator menu function when an MP3 disc or JPEG
disc includes the menu. (Default: WITH MENU)
WITHOUT MENU:
Displays all the files contained in the MP3 disc or JPEG disc.
WITH MENU:
Displays only the folder menu of the MP3 disc or JPEG disc.
DIVX SUBTITLE *6
You can select a language group to assign the desired font sets used as external
subtitles for DivX files. (Default: GROUP1)
GROUP1:
Albanian, Basque, Catalan, Danish, Dutch, English, Faroese, Finnish, French,
German, Icelandic, Irish, Italian, Norwegian, Portuguese, Rhaeto-Romanic, Scottish,
Spanish, Swedish
GROUP2:
Albanian, Croatian, Czech, Hungarian, Polish, Romanian, Slovak, Slovenian
GROUP3:
Bulgarian, Byelorussian, Macedonian, Russian, Serbian, Ukrainian
GROUP4:
Hebrew, Yiddish
GROUP5:
Turkish
PASSWORD
See page 36 for details.
CHANGE
PBC
*6
You can enable or disable the auto-display function of the playback control (PBC)
menu for VCDs and SVCDs. (Default: ON)
ON: Displays the PBC menu automatically when a disc is played back.
OFF: Starts playback of a disc without displaying the PBC menu.
RESET
See page 56 for details.
“PREFERENCE PAGE” is available only when no disc is loaded or the DVD player is in the stop mode (see page 25).
The file names of the DivX movie and external subtitle should be identical (except extensions). The file extensions supported for
external subtitles are “.srt”, “.sub”, “.ssa”, and “.smi”. Some external subtitles may be displayed incorrectly depending on the disc
characteristics or recording conditions.
OTHER
OPERATIONS
DEFAULT
*5
Parameter
Notes
• Consumers should note that not all high definition television sets are fully compatible with this DVD player and may cause artifacts to
be displayed in the picture. In case of 525 or 625 progressive scan picture problems, it is recommended that the user switches the
connection to the “Standard Definition” output. If there are questions regarding your video monitor compatibility with this DVD
player, please contact our customer service center.
• The DVD player is compatible with the complete line of YAMAHA products, including the projectors DPX-1300, DPX-830 and the
plasma monitor PDM-4220.
English
55 En
Configuring the DVD Player Settings (Setup Menu)
Resetting the DVD player settings
You can reset all options and your personal settings to the
initial factory settings, except your password for
“PARENTAL” and “DISC LOCK”.
ON SCREEN
PRESET
MENU
INFO.
ENTER
A-E
A-E
TOP MENU
/RETURN
SET UP
Cursor keys,
ENTER
SET UP
TV VOL
VOLUME
DISPLAY
SLEEP
DVD/CD
TUNER
BAND
TAPE/MD
AUX/TV
DOCK
DVD/CD
SUBTITLE ANGLE
ZOOM
AUDIO
1
Press DVD/CD to set the remote control to
the DVD/CD mode.
2
Press SET UP.
The setup menu appears on the TV screen.
3
Press
or
PAGE”.
to select “PREFERENCE
Note
“PREFERENCE PAGE” is available only when no disc is
loaded or the the DVD player is in the Stop mode (see
page 25).
4
Press
or
to select “DEFAULT”, and
then press
to select “RESET”.
5
Press ENTER to reset the settings.
All DVD player settings (except password) are reset
to the initial factory settings.
56 En
Language Codes
If your desired language for “AUDIO”, “SUBTITLE” and “DISC MENU” is not listed in the setup menu (see page 21),
select “OTHERS”, then enter the 4-digit language code for your desired language.
Khmer
Kikuyu; Gikuyu
Kinyarwanda
Kirghiz
Komi
Korean
Kuanyama; Kwanyama
Kurdish
Kwanyama; Kuanyama
Lao
Latin
Latvian
Letzeburgesch;
Limburgan; Limburger
Limburger; Limburgan
Lingala
Lithuanian
Luxembourgish
Macedonian
Malagasy
Malay
Malayalam
Maltese
Manx
Maori
Marathi
Marshallese
Moldavian
Mongolian
Nauru
Navaho, Navajo
Navajo; Navaho
Ndebele, North
Ndebele, South
Ndonga
Nepali
North Ndebele
Northern Sami
Norwegian
Norwegian Bokmål; Bokmål
Norwegian Nynorsk
Nyanja; Chichewa; Chewa
Nynorsk, Norwegian
Occitan; Provençal
Old Bulgarian; Old Slavonic
Old Slavonic; Old Bulgarian
Oriya
Oromo
Ossetian; Ossetic
Ossetic; Ossetian
Pali
Panjabi
Persian
Polish
Portuguese
Provençal; Occitan (post)
Pushto
Quechua
Raeto-Romance
Romanian
Rundi
Russian
Samoan
Sango
Sanskrit
Sardinian
Scottish Gaelic; Gaelic
Serbian
Shona
Sindhi
Sinhalese
Slavonic; Church Slavic
Slovak
Slovenian
7577
7573
8287
7589
7586
7579
7574
7585
7574
7679
7665
7686
7666
7673
7673
7678
7684
7666
7775
7771
7783
7776
7784
7186
7773
7782
7772
7779
7778
7865
7886
7886
7868
7882
7871
7869
7868
8369
7879
7866
7878
7889
7878
7967
6785
6785
7982
7977
7983
7983
8073
8065
7065
8076
8084
7967
8083
8185
8277
8279
8278
8285
8377
8371
8365
8367
7168
8382
8378
8368
8373
6785
8375
8376
Somali
Sotho, Southem
South Ndebele
Spanish; Castilian
Sundanese
Swahili
Swati
Swedish
Tagalog
Tahitian
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga (Tonga Islands)
Tsonga
Tswana
Turkish
Turkmen
Twi
Uighur
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Walloon
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zhuang; Chuang
Zulu
8379
8384
7882
6983
8385
8387
8383
8386
8476
8489
8471
8465
8484
8469
8472
6679
8473
8479
8483
8478
8482
8475
8487
8571
8575
8582
8590
8673
8679
8765
6789
8779
8872
8973
8979
9065
9085
English
6566
6565
6570
8381
6577
6582
7289
6583
6569
6589
6590
6665
6985
6669
6678
6672
6673
7866
6683
6682
6671
7789
6983
6765
6772
6769
7889
7889
9072
9065
6785
6785
6786
7587
6779
6783
6865
7876
6890
6978
6979
6984
7079
7074
7073
7082
7089
7168
7176
7565
6869
7573
6976
7178
7185
7265
7269
7290
7273
7279
7285
7383
7379
7365
7385
7375
7165
7384
7465
7486
7576
7578
7583
7575
ADDITIONAL
INFORMATION
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Avestan
Aymara
Azerbaijani
Bashkir
Basque
Belarusian
Bengali
Bihari
Bislama
Bokmål, Norwegian
Bosnian
Breton
Bulgarian
Burmese
Castilian, Spanish
Catalan
Chamorro
Chechen
Chewa; Chichewa; Nyanja
Chichewa; Chewa; Nyanja
Chinese
Chuang; Zhuang
Church Slavic; Slavonic
Church Slavonic; Church
Chuvash
Cornish
Corsican
Czech
Danish
Dutch
Dzongkha
English
Esperanto
Estonian
Faroese
Fijian
Finnish
French
Frisian
Gaelic; Scottish Gaelic
Gallegan
Georgian
German
Gikuyu; Kikuyu
Greek
Guarani
Gujarati
Hausa
Hebrew
Herero
Hindi
Hiri Motu
Hungarian
Icelandic
Ido
Interlingua (International)
Inuktitut
Inupiaq
Irish
Italian
Japanese
Javanese
Kalaallisut
Kannada
Kashmiri
Kazakh
57 En
TROUBLESHOOTING
Troubleshooting
Refer to the table below when this unit does not function properly. If the problem you are experiencing is not listed below
or if the instruction below does not help, turn off this unit, disconnect the power cable, and contact the nearest authorized
YAMAHA dealer or service center.
Receiver (RX-E810)
■ General
Problem
Cause
Remedy
See
page
The receiver fails to
turn on or enters the
standby mode soon
after the power is
turned on.
The power cable is not connected or the
plug is not completely inserted.
Connect the power cable firmly.
18
The receiver has been exposed to a strong
external electric shock (such as lightning
or strong static electricity).
Set the receiver to the standby mode, disconnect the
power cable, plug it back in after 30 seconds and then
use it normally.
—
No sound
Incorrect input or output cable
connections.
Connect the cables properly. If the problem persists,
the cables may be defective.
12
No appropriate input source has been
selected.
Select an appropriate input source with the INPUT
selector on the front panel (or the input selection keys
on the remote control).
—
Speaker connections are not secure.
Secure the connections.
13
The volume is turned down.
Turn up the volume.
—
Signals the receiver cannot reproduce are
being input from a source component,
such as a CD-ROM.
Play a source whose signals can be reproduced by the
receiver.
—
The sound suddenly
goes off.
The timer has turned off the receiver.
Turn on the receiver, and play the source again.
—
Sound is heard from
the speaker on one
side only.
Incorrect cable connections.
Connect the cables properly. If the problem persists,
the cables may be defective.
13
There is noise
interference from
digital or radio
frequency equipment.
The receiver is too close to the digital or
high-frequency equipment.
Move the receiver further away from such equipment.
—
58 En
Troubleshooting
■ Tuner
Problem
FM stereo reception is
noisy.
FM
AM
Cause
The characteristics of FM stereo
broadcasts may cause this problem
when the transmitter is too far away or
the antenna input is poor.
Remedy
See
page
Check the antenna connections.
15
Try using a high-quality directional FM
antenna.
—
Use the manual tuning method.
37
There is distortion, and
clear reception cannot
be obtained even with a
good FM antenna.
There is multi-path interference.
Adjust the antenna position to eliminate
multi-path interference.
—
The desired station
cannot be tuned into
with the automatic
tuning method.
The signal is too weak.
Use a high-quality directional FM antenna.
—
Use the manual tuning method.
37
Previously preset
stations can no longer
be tuned into.
The receiver has been disconnected for
a long period.
Set preset stations
38
The desired station
cannot be tuned into
with the automatic
tuning method.
The signal is weak or the antenna
connections are loose.
Tighten the AM loop antenna connections
and orient it for the best reception.
15
Use the manual tuning method.
37
There are continuous
crackling and hissing
noises.
Noises result from lightning,
fluorescent lamps, motors, thermostats
and other electrical equipment.
Use an outdoor antenna and a ground wire.
This will help somewhat, but it is difficult to
eliminate all noise.
—
There are buzzing and
whining noises.
A TV set is being used nearby.
Move the receiver away from the TV set.
—
ADDITIONAL
INFORMATION
English
59 En
Troubleshooting
■ iPod
Note
In case of a transmission error without a status message appearing in the front panel and in the OSD, check the connection to your iPod
(see page 17).
Status message
Loading...
Cause
Remedy
See
page
The receiver is in the middle of
recognizing the connection with your
iPod.
The receiver is in the middle of acquiring
song lists from your iPod.
Connect error
There is a problem with the signal path
from your iPod to the receiver.
Turn off the receiver and reconnect the YAMAHA
iPod universal dock to the DOCK terminal of the
receiver.
17
Try resetting your iPod.
—
Only iPod (Click and Wheel), iPod nano, and iPod
mini are supported.
—
Unknown type
The iPod being used is not supported by
the receiver.
iPod connected
Your iPod is properly stationed in a
YAMAHA iPod universal dock (such as
YDS-10 sold separately) connected to the
DOCK terminal of the receiver, and the
connection between your iPod and the
receiver is complete.
Disconnected
Your iPod was removed from a YAMAHA
iPod universal dock (such as YDS-10 sold
separately) connected to the DOCK
terminal of the receiver.
Station your iPod back in a YAMAHA iPod universal
dock (such as YDS-10 sold separately) connected to
the DOCK terminal of the receiver.
17
Unable to play
The receiver cannot play back the songs
currently stored on your iPod.
Check that the songs currently stored on your iPod
are playable.
—
Store some other playable music files on your iPod.
—
60 En
Troubleshooting
DVD player (DVD-E810)
Problem
Cause
Remedy
See
page
Power turns on but
immediately shuts off.
The power cable is not connected or the
plug is not completely inserted.
Connect the power cable firmly.
18
Power immediately
shuts off during
playback.
Auto-standby function of the receiver
works when the receiver can not receive
the playing signal transmitted from the
DVD player with the system control cable
for 30 minutes.
Check the connection of the system control cable
between the receiver and the DVD player.
12
The TV (monitor)
does not show the
picture properly.
The component video signal output setting
may not match the video connection.
Set “COMPONENT” of the DVD player to match the
connection method.
54
The color system setting of the DVD
player may not match the specification of
your TV.
Check that the color system of your TV, and then set
“TV TYPE”of the DVD player to match it.
53
The progressive scan mode may be used
with a TV that does not support it.
Set “PROGRESSIVE” to “OFF”.
54
The disc being played back may not be
compatible with the DVD player.
Check that the disc is compatible with the DVD
player.
63
Occasionally, a small amount of picture
distortion may appear depending on the
disc being played back. This is not a
malfunction.
The screen size of the
TV or monitor looks
strange (the image is
distorted or the
subtitle is missing).
The TV size setting of the DVD player to
match the connection method.
Set “TV DISPLAY” of the DVD player to match your
TV, or check the screen size setting of your TV.
53
When the progressibe scan mode is
activated, image with a 4:3 aspect ratio are
played back on a 16:9 wide television
screen.
Set “TV DISPLAY” of the DVD player to adjust the
screen size. If you cannot adjust it, set
“PROGRESSIVE” to “OFF”.
53
No sound or distorted
sound
The sampling rate of a MP3 or WMA file
may not be compatible with the DVD
player.
Check the sampling rate and bit rate of an MP3 or
WMA file are compatible with the DVD player.
63
No audio at digital
output
Incorrect digital cable connections.
Connect the digital cables properly.
16
The disc being played back may not be
compatible with the DVD player.
Check that the disc is compatible with the DVD
player.
63
The digital output settings of the DVD
player may not be set properly.
Set “DIGITAL OUTPUT” of the DVD player
according to your external audio equipment
connections.
52
ADDITIONAL
INFORMATION
English
61 En
Troubleshooting
Remedy
See
page
You may use a CD-R/RW, DVD+R/RW
or DVD-R/RW that is not finalized.
Finalize the CD-R/RW, DVD+R/RW or DVD-R/RW.
—
The disc label may not be facing up.
Check that the disc label is facing up.
—
The disc may be defective.
Try to play back another disc. If the same problem
does not happen, the disc you want to play back is
defective.
—
JPEG or MP3/ WMA disc may not
contain sufficient picture files or music
tracks to be played back.
Check that your JPEG or MP3/ WMA disc contains at
least 10 JPEG picture files or 5 MP3/WMA music
files.
—
For MP3/WMA files, the sampling rate
and bit rate may not be compatible.
For JPEG files, the resolution may not be
compatible.
For MP3/WMA files, check that the sampling rate
and bit rate are compatible. For JPEG files, check that
the resolution is compatible.
63
The region code of the disc may not be
supported with the DVD player.
Check the region code.
63
Picture freezes
momentarily during
playback.
The disc may be dirty.
Check the disc for fingerprints/scratches and clean it
with a soft cloth wiping from center to edge.
64
The DVD player does
not read CDs and
DVDs.
The disc lens may be dirty.
Use a lens cleaner to clean the lens.
64
Unable to turn on or
off a progressive scan
The component video signal output setting
may not match the video connection.
Set “COMPONENT” of the DVD player to match the
connection method.
54
No sound during DivX
movie playback
The audio code may not be supported with
the DVD player.
Problem
Disc playback does
not start.
Cause
Remote control
Problem
The remote control
does not work nor
function properly.
Cause
See
page
Wrong distance or angle.
The remote control functions within a maximum
range of 6 m (20 ft) and no more than 30 degrees offaxis from the front panel.
11
Direct sunlight or lighting (from an
inverter type of fluorescent lamp, etc.) is
striking the remote control sensor of this
unit.
Reposition this system.
—
The batteries are weak.
Replace all batteries.
11
The remote control code is not correctly
set.
Set the remote control code correctly using “LIST OF
REMOTE CONTROL CODES” at the end of this
manual.
48
Try setting another code for the same manufacturer
using “LIST OF REMOTE CONTROL CODES” at
the end of this manual.
48
Even if the remote control code is
correctly set, there are some models that
do not respond to the remote control.
62 En
Remedy
Notes on Discs
Disc information
The following tables explain the disc types supported by
the DVD player.
y
Disc logo marks are printed on the disc and the disc jacket.
Note
Do not load any other type of disc into the DVD player. Doing so
may damage the DVD player.
The DVD player can play:
– DVD+R/RW and DVD-R/RW discs recorded in
DVD-Video compatible format.
– DVD-RW discs recorded in VR format (compatible
with CPRM).
• The following discs cannot be played on the DVD player.
CD-ROM, DVD-ROM, DVD-RAM, CDV. (This product can
play some types of DVD-R (Video format only).)
• CD-R/RW, DVD+R/RW and DVD-R/RW cannot be played
unless finalized.
• Only the first session of DVD+R/R DL and DVD-R/RW/R DL
can be played.
• Copyright-protected WMA files cannot be played back with the
DVD player.
• Some discs cannot be played depending on the recording
conditions such as PC environment and application software.
Failure can also result from disc characteristics and condition,
like material quality, scratches or curvature.
• Do not use any non-standard sized or shaped (heart-shaped,
etc.) discs.
• Do not use discs with tape, seals, or paste on their surface.
• Do not use discs with many scratches on their surface.
DVD region codes
The region code (an ID number assigned to each market
region) is set for normal DVD players and DVD video
discs. The DVD player supports the discs with the region
codes shown in the table below. For details, read the
information on the disc jacket.
Destination
U.S.A.
Canada
U.K.
Europe
Region code of
DVD player
Playable discs
1
1
ALL
2
2
ALL
4
4
ALL
3
3
ALL
Australia
Korea
Taiwan
Asia
ADDITIONAL
INFORMATION
English
The DVD player can play the following data discs
(For MP3 and WMA files, the parenthetic words
represent the compatible sampling rate and bit
rate):
– MP3 files, recorded on CD-R/RW, DVD+R/RW and
DVD-R/RW (fs 32, 44.1, 48 kHz/96-320 kbps
(CBR only))
– WMA files, recorded on CD-R/RW, DVD+R/RW
and DVD-R/RW (When in fs 44.1 kHz: 64-192
kbps/When in 48 kHz: 128-192 kbps (CBR only))
– JPEG (except progressive JPEG) files, recorded on
CD-R/RW, DVD+R/RW and DVD-R/RW
(compatible resolution: 3072 x 2048 or less)
– DivX Video files, recorded on CD-R/RW,
DVD+R/RW and DVD-R/RW
– KODAK Picture CD
– FUJICOLOR CD
– Official DivX® Ultra Certified product
– Plays all version of DivX® video (including DivX®
6) with enhanced playback of DivX® media files
and the DivX® Media Format
– ISO 9660 Level1/Level2 for CD-R/RW
– Up to 299 folders per disc and up to 648 files per
folder with 8 hierarchies
Notes
63 En
Notes on Discs
Handling a disc
• Do not touch the surface of the
disc. Hold a disc by its edge and
center hole.
• Do not leave a disc in the tray when
you are not playing it.
• Do not write on the disc with a pencil or other marker.
• Do not stick tape, seals or other attachments to a disc, and do
not bring into contact with glue.
• Do not use a protective cover to prevent scratches.
• Do not use a disc whose surface can be printed with a
commercially available label printer.
• Do not put a disc in a place with
direct sunlight, high
Caution
temperature, high humidity or a
lot of dust.
• If a disc becomes dirty, wipe it
with a clean, dry cloth from the
center out to the edge. Do not use
record cleaner or paint thinner.
• To avoid malfunction, do not use a
commercially available lens
cleaner.
64 En
Glossary
Audio information
■ Dolby Digital
■ Sampling frequency
Dolby Digital is a digital surround sound system that gives
you completely independent multi-channel audio. With 3
front channels (left, center, and right), and 2 surround
stereo channels, Dolby Digital provides 5 full-range audio
channels. With an additional channel especially for bass
effects, called LFE (low frequency effect), the system has
a total of 5.1-channels (LFE is counted as 0.1 channel).
The receiver downmixes the multi-channel audio to 2
channel so that you can enjoy Dolby Digital sources
easily.
The number of sampling (process for digitalizing analog
signals) per second. In principle, the higher the sampling
rate, the wider the frequency range that can be played
back, and the higher the quantized bit rate, the finer the
sound that can be reproduced.
■ MP3 (MPEG Audio Layer-3)
■ Track (CD/Video CD/Super Video CD)
One of the audio compression methods used by MPEG. It
employs the irreversible compression method, which
achieves a high compression rate by thinning out the data
of hardly audible part to the human ears. It is said to be
capable of compressing the data quantity by about 1/11
(128 kbps) while maintaining a similar audio quality to
music CD.
■ PCM (Pulse Code Modulation)
A signal that is changed to digital format without
compression. A CD is recorded with 16-bit sound at
44.1 kHz, while DVD recording is anywhere from 16 bits
at 48 kHz to 24 bits at 192 kHz, which makes it a higher
quality sound than CD. This signal also has a type called
Packed PCM (PPCM) that can be compressed without any
loss of data.
■ Title, Chapter (DVD)
DVD video lets you divide a disc in a big way by titles or a
small way by chapters. Each division is either called a title
number or a chapter number.
A CD, VCD or SVCD can be divided into a number of
segments (tracks). Each division is called a track number.
■ WMA (Windows Media Audio)
An audio compression method developed by Microsoft
Corporation. It employs the irreversible compression
method, which achieves a high compression rate by
thinning out the data of hardly audible part to the human
ears. It is said to be capable of compressing the data
quantity by about 1/22 (64 kbps) while maintaining a
similar audio quality to music CD.
ADDITIONAL
INFORMATION
English
65 En
Glossary
Video information
■ Component video signal
With the component video signal system, the video signal
is separated into the Y signal for the luminance and the PB
and PR signals for the chrominance. Color can be
reproduced more faithfully with this system because each
of these signals is independent. The component signal is
also called the “color difference signal” because the
luminance signal is subtracted from the color signal.
■ NTSC (National Television System
Committee)
NTSC is a video signal system (525 lines, 30 frames per
second) used in North America, Central America, a
number of South American countries, and some Asian
countries, including Japan.
Copyright and logo marks
This product incorporates copyright protection technology
that is protected by method claims of certain U.S. patents
and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use of
this copyright protection technology must be authorized
by Macrovision Corporation, and is intended for home and
other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of
Dolby Laboratories.
■ PAL (Phase Alternating Line)
PAL is a video signal system (625 lines, 25 frames per
second) used in the United Kingdom, much of the rest of
western Europe, several South American countries, some
Middle East and Asian countries, several African
countries, Australia, New Zealand, and other Pacific
island countries.
■ Pan & Scan and Letterbox
In general, DVD Video is produced for viewing on a wide
television screen with an aspect ratio of 16:9. This means
you can now view most material with the intended aspect
ratio on a wide-screen television.
This ratio will not fit on a standard television that has an
aspect ratio of 4:3. Two picture styles, Pan & Scan and
Letterbox, deal with this problem.
• Pan & Scan cuts off the left and right portions of the
picture to fill the screen.
• Letterbox inserts black bands at the top and bottom of
the picture to reproduce an aspect ratio of 16:9.
■ Progressive scan
A method of displaying all scanning lines in a frame at
once, reducing flicker noticeable on a larger screen and
creating a sharp and smooth image.
■ Title, Chapter (DVD Video)
DVD video lets you divide a disc in a big way by titles or a
small way by chapters. Each division is either called a title
number or a chapter number.
66 En
MPEG Layer-3 audio decoding technology licensed from
Fraunhofer IIS and Thomson multimedia.
DivX, DivX Ultra Certified, and associated logos are trademarks
of DivX, Inc. and are used under license.
iPod®
“iPod” is a trademark of Apple Computer, Inc., registered in the
U.S. and other countries.
Specifications
■ RX-E810
AMPLIFIER SECTION
• Minimum RMS output power per channel
(6 Ω , 1 kHz, 0.1% THD) ......................................... 55 W + 55 W
• Maximum RMS output power per channel
(6 Ω , 1 kHz, 1% THD) ............................................ 65 W + 65 W
• Input sensitivity/Impedance
DVD/MD/TAPE/AUX etc. ..................................... 150 mV/47 kΩ
• Frequency Response (20 Hz to 20 kHz)
DVD etc. ........................................................................ 0 ± 0.5 dB
• Total Harmonic Distortion (20 Hz to 20 kHz)
DVD etc. 30 W, 6 Ω.................................................. 0.04% or less
• Signal to Noise ratio (IHF-A network)
DVD etc. (150 mV, Input shorted)........................... 93 dB or more
• Output level/Impedance
PHONES....................................................................0.23 V/120 Ω
AUDIO FORMAT
• Dolby Digital/DTS/MPEG................................. Compressed Digital
PCM ......................................................................... 16, 20, 24 bits
fs, 44.1, 48, 96 kHz
MP3 (ISO 9660)..........................................96, 128, 256, 320 kbps
fs, 32, 44.1, 48 kHz
WMA.................................................................64 kbps - 192 kbps
fs, 44.1, 48 kHz
• Analog Sound............................................................................stereo
LASER
• Type..................................................... Semiconductor laser GaAlAs
• Wave length ................................................................ 650 nm (DVD)
780 nm (VCD/CD)
• Output power................................................................ 7 mW (DVD)
10 mW (VCD/CD)
• Beam divergence .................................................................60 degree
TUNER SECTION
AUDIO PERFORMANCE
FM Section
•
•
•
•
• Tuning Range
U.S.A., Canada, Asia, and Taiwan models
......................................................................... 87.50-107.90 MHz
Other models.................................................... 87.50-108.00 MHz
AM Section
• Tuning Range
U.S.A., Canada, Asia, and Taiwan models ...............530-1710 kHz
Other models.............................................................531-1611 kHz
• Sensitivity
FM (S/N 68 dB) .................................................................. 6.0 µV
AM................................................................................. 600 µV/m
GENERAL
■ DVD-E810
PLAYBACK SYSTEM
• DVD video, video CD and SVCD, CD, picture CD, CD-R/RW,
DVD+R/RW, DVD-R/RW
TV STANDARD (PAL/50 Hz) (NTSC/60 Hz)
• Number of lines
• Playback
625
Multistandard
525
(PAL/NTSC)
CONNECTIONS
•
•
•
•
•
•
•
•
SCART ........................................................................Euroconnector
Y output........................................................................ Cinch (green)
PB/CB output.................................................................... Cinch (blue)
PR/CR output......................................................................Cinch (red)
S-Video output ........................................................Mini DIN, 4 pins
Video output ..............................................................................Cinch
Audio output (L+R) ..................................................................Cinch
Digital output
...................... 1 coaxicial, 1 optical (IEC60958 for CDDA/LPCM)
(IEC61937 for MPEG2, Dolby Digital)
GENERAL
• Power supply
U.S.A. and Canada models ..................................AC 120 V, 60 Hz
Australia model ....................................................AC 240 V, 50 Hz
U.K. and Europe models ......................................AC 230 V, 50 Hz
Korea model ............................................ AC 110-240 V, 50/60 Hz
China model .........................................................AC 220 V, 50 Hz
• Standby Power consumption ................................................. < 1.0 W
• Power consumption ..................................................... Approx. 12 W
• Dimensions (W x H x D) .................................. 215 x 108 x 330 mm
• Weight ...................................................................................... 2.3 kg
ADDITIONAL
INFORMATION
• Power Supply
U.S.A. and Canada models .................................. AC 120 V, 60 Hz
Australia model.................................................... AC 240 V, 50 Hz
U.K. and Europe models...................................... AC 230 V, 50 Hz
Korea model......................................................... AC 220 V, 60 Hz
China model......................................................... AC 220 V, 50 Hz
Asia model ...............................................AC 220-240 V, 50/60 Hz
Taiwan model...........................................AC 110-120 V, 50/60 Hz
• Power consumption
U.S.A., Canada, and Taiwan models ....................................115 W
Other models.........................................................................130 W
• Standby Power consumption .................................................... 0.1 W
• AC Outlets
U.K. and Australia models............................ 1 (Total 100 W max.)
Korea model............................................................................ None
Other models................................................. 2 (Total 100 W max.)
• Dimensions (W x H x D) .................................. 215 x 108 x 363 mm
• Weight.......................................................................................5.7 kg
DA Converter ............................................................. 24 bit/192 kHz
Signal-Noise (1 kHz)...............................................................105 dB
Dynamic range (1 kHz) .............................................................97 dB
DVD
fs 96 kHz
2 Hz - 44 kHz
fs 48 kHz
2 Hz - 22 kHz
• SVCD
fs 48 kHz
2 Hz - 22 kHz
fs 44.1 kHz
2 Hz - 20 kHz
• CD/VCD
fs 44.1 kHz
2 Hz - 20 kHz
• Distortion and Noise (1 kHz) ..............................................0.0035 %
*Specifications are subject to change without notice.
VIDEO PERFORMANCE
English
• Video (CVBS) Output.............................................. 1 Vpp into 75 Ω
• S-Video output .....................................................Y: 1 Vpp into 75 Ω
C: 305 mVpp into 75 Ω
• RGB (Scart) output ........................................... 700 mVpp into 75 Ω
• Component video output......................................Y: 1 Vpp into 75 Ω
PBCB PRCR: 700 mVpp into 75 Ω
67 En
LASER
Type
Wave length
CLASS 1 LASER PRODUCT
LASER KLASSE 1 PRODUKT
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
PRODUIT LASER DE CLASSE 1
Output Power
Beam divergence
Semiconductor laser GaAlAs
650 nm (DVD)
780 nm (VCD/CD)
7 mW (DVD)
10 mW (VCD/CD)
60 degrees
CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may result
in hazardous radiation exposure.
LASER
Type
AVOID DIRECT EXPOSURE TO THE BEAM
DANGER: INVISIBLE LASER RADIATION WHEN OPEN
DO NOT STARE INTO BEAM
CAUTION:INVISIBLE LASER RADIATION WHEN OPEN
CAUTION VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN. AVOID EXPOSURE TO BEAM.
ATTENTION RAYONNEMENT LASER VISIBLE ET
INVISIBLE EN CAS D’OUVERTURE. EXPOSITION
DANGEREUSE AU FAISCEAU.
Laser à semi-conducteur
GaAlAs
Longueur d’onde
650 nm (DVD)
780 nm (VCD/CD)
Puissance de sortie
7 mW (DVD)
10 mW (VCD/CD)
Divergence de faisceau 60 degrés
AVERTISSEMENT
L’utilisation de commandes et l’emploi de réglages ou
de méthodes autres que ceux décrits ci-dessous,
peuvent entraîner une exposition à un rayonnement
dangereux.
LIST OF REMOTE CONTROL CODES
LISTE DES CODES DE COMMANDE
TV
Admiral
Aiwa
Akai
Alba
AOC
Bell & Howell
Bestar
Blaupunkt
Blue sky
Brandt
Brocsonic
Bush
By Design
Clatronic
Craig
Croslex
Curtis Mathis
Daewoo
292/293/216
294/276/283/284
295/296
296
297
292
298
229/222
298
223
297
296
201/202
298
224
225/298
297/226
297/298/224/227/
228
Dayton
239
Dwin
293/281
Emerson
297/224/239/232
Ferguson
223/265/266
First line
298
Fisher
295/233
Fraba
298
Fujitsu
289
Funai
277/278
GE
293/297/234/235/
236
Goodmans
296/298/223
Grundig
229/238/249
Hitachi
297/239/242/243/
285
ICE
296
Irradio
296
Itt/Nokia
244/245
JC Penny
293/297/234/237
JVC (Victor)
296/246/247/286
Kendo
298
KTV
297/239
LG/Goldstar
297/298/239/237
Loewe
298/248
LXI
293/297/225/226/
233/298
Magnavox
297/225/239/298
Marantz
298/210
Matsui
295
Medion
203/204/298
Memorex
297/216
Mitsubishi
299/297/259/287
Nad
226/255
NEC
297/252/282
Nokia
244/245
Nokia Oceanic 245
Nordmende
265/266
Onwa
296
Panasonic
Philco
Philips
Pioneer
Portland
Proscan
Proton
Quasar
Radio Shack
RCA
SABA
Sampo
Samsung
Sanyo
Schneider
Scott
Sharp
Siemens
Signature
Sony
Sylvania
Symphonic
Telefunken
Thomson
Toshiba
Videch
Wards
Yamaha
Zenith
234/235/236/253/
288/211
297/225/239/298
225/205/298
226/235/254/255/
268
297/256
293/221
297/250/260/270
234/235
299/293/297
293/297/234/256/
257/258/221
223/269/265/266
281/297/280
297/239/248/262/
275
295/233/279/272/
273/274/212
296
297
292/239/232/213
229
216/292
263/214
297/225/298
217/218/219
269/264/265/266
223/266
292/226/267/215
297/242
297/239/232/216
299/292/242/285/
287/253
216/261/271
MCR-E810_UCA_cv.fm Page 1 Thursday, July 20, 2006 5:48 PM
UCA
RECEIVER/DVD PLAYER
AMPLI-TUNER/LECTEUR DE DVD
© 2006
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND
YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
All rights reserved.
Printed in China
WH45450
OWNER'S MANUAL
MODE D'EMPLOI