Electrolux | User manual | Upright Vacuum Cleaner OWNERʼS GUIDE HP5550 Series
Add to my manuals18 Pages
advertisement
TM
Part No. 75448
(1/05)
Upright Vacuum Cleaner
Household Type
OWNERʼS GUIDE
HP5550 Series
IMPORTANT
Do not return to the store. For assembly problems or questions, for replacement of broken or missing items, or to order
replacement parts and accessories
to be shipped direct to you contact:
Eureka Customer Service toll free at
1-800-282-2886, 8 a.m. to 7:30 p.m.
(CST), Monday - Friday and 10 a.m. to
6:30 p.m. Saturday. Or visit our web site,
www.eureka.com
*En Mexico llame al (55) 5343-4384
PLEASE RETAIN
We suggest you record the model, type and serial numbers below. They are located on the silver rating plate on your cleaner. For prompt and complete service information, always refer to these numbers when inquiring about service.
Model & Type ___________________________
Serial No. ______________________________
It is also important to keep your receipt as proof of date of purchase.
©2005 Electrolux Home Care Products Ltd. Printed in China
Index
Important Information ........................... 2
Assemble ........................................... 3-4
Use .................................................... 5-6
Accessories .......................................... 7
How to Remove Blockages .................. 8
Brush Roll ............................................. 9
Brush Roll Belt ...................................... 9
Filter .................................................... 10
Dust Cup .............................................11
Problem Solving ................................. 13
Warranty ............................................. 14
Customer Order Form ........................ 16 appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way.
GENERAL INFORMATION
The cleaner is designed to pick up dirt and dust particles. Avoid picking up hard or sharp objects with the cleaner to prevent hose clogs.
Service Information
The instructions in this booklet serve as a guide to routine maintenance. For additional service information, telephone our toll free number for the nearest Eureka Authorized Warranty Station.
Canada : 1-800-282-2886
If you prefer, you can write to Electrolux Home
Care Products North America, Consumer
Service, P O Box 3900, Peoria, Illinois, 61612,
USA. In Canada, write to Electrolux Home Care
Products Canada, 866 Langs Drive, Cambridge,
Ontario N3H 2N7. Refer to The Eureka Warranty for complete service information.
Thermal Cut Off
This vacuum cleaner has a special thermostat that protects the cleaner in case of motor overheating. If the cleaner suddenly shuts off, turn the switch off and unplug the cleaner. Check the cleaner for a possible source of overheating such as a blocked hose or clogged filters. If these conditions are found, fix them and wait at least 30 minutes before attempting to use the cleaner. After the 30 minute period, plug the cleaner back in and turn on the switch. If the cleaner still does not run, then call 1-800-282-
2886 for customer assistance.
2
IMPORTANT SAFEGUARDS
be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS
WET PICKUP VACUUM CLEANER.
WARNING
To reduce the risk of fire, electric shock, or injury:
• Do not use outdoors or on wet surfaces.
• Do not leave vacuum cleaner when plugged in. Turn off the switch and unplug the electrical cord when not in use and before servicing.
• Do not allow to be used as a toy. Close attention is necessary when used by or near children.
• Use only as described in this manual. Use only manufacturerʼs recommended attachments.
• Do not use with damaged cord or plug. If vacuum cleaner is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, have unit serviced before using.
• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run vacuum cleaner over cord. Keep cord away from heated surfaces.
• Do not use extension cords or outlets with inadequate current carrying capacity.
• Turn off all controls before unplugging.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Do not handle plug or vacuum cleaner with wet hands.
• Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce airflow.
• This vacuum cleaner creates suction and contains a revolving brush roll. Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
• Do not place cleaner on furniture or stairs as the brush roll may cause damage. Place cleaner on floor with the handle in storage position while using attachments.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Belt pulleys can become hot during normal use. To prevent burns, avoid touching the belt pulley when servicing the drive belt.
• Use extra care when cleaning on stairs.
• Do not use to pick up flammable or combustible liquids such as gasoline, or use in areas where they may be present.
• Store your cleaner indoors in a cool, dry area.
• Keep your work area well lighted.
• Unplug electrical appliances before vacuuming them.
INSTRUCTIONS
How To Assemble
CAUTION:
Assemble the cleaner completely before plugging into an electrical outlet.
CAUTION:
Moving parts, stay clear of brush roll when plugging in.
NOTE:
Features may vary by model yet all parts assemble the same.
Step A Remove Dust Cup Step B Attach Handle
NOTE: Screws must be installed to properly secure the handle.
Dust Cup
Latch
Dust Cup
Handle
Handle
Tabs
Slots
Two Screw Locations
Screw
Screw
Dust Cup
1. Remove dust cup from unit to expose the two screw installation locations. Release the dust cup by rotating the dust cup latch to the left. Pull out and up on the dust cup handle to remove from unit.
2. Position handle as above. Slide the handle down over the top of the unit, inserting handle tabs into slots on unit.
3. Find the two screws in the accessory bag included in the carton. To secure the handle on the unit, install the two screws.
3
Step C Replace Dust Cup
Dust Cup
Latch
Step D Store Accessories
Dusting/
Upholstery
Brush
Nesting
Extension
Wands
(shipped stored on cleaner)
Crevice
Tool
Groove
4. Replace dust cup by aligning front of the bottom of dust cup into groove on cleaner. Pivot dust cup up against cleaner and rotate the dust cup latch to the right to secure.
Step E Store Electrical Cord
5
Cord
Retainer
6
Cord
Hook
6
Cord
Hook
5. You will find your cord retainer on the handle above the upper cord hook. Firmly push the electrical cord down into the cord retainer. This will place the cord out of the way the next time you vacuum.
6. Next wind the cord around the two cord hooks on the back of the cleaner.
7. Secure the plug to the cord to prevent unwinding.
4
How To Use
CAUTION: Do not plug in cleaner until you understand all controls and features.
13
11
12
1
2
3
4
5
1. Cord Retainer. To use, push electrical cord down into cord retainer.
2. ON/OFF Switch. International symbol I means On, International symbol O means Off.
3. Dust Cup Latch. When dust cup latch is pointing to the left, the dust cup compartment is unlocked. When dust cup latch is pointing to the right the dust cup is locked in place. See the locked/unlocked symbols on the unit.
4. HEPA Filter Compartment. To open, slide HEPA filter door up and pull away from unit. To close, place HEPA filter door at top of opening pressing against unit, slide down into place.
5. Dust Cup Handle. Use the handle to remove and replace the dust cup in the dust cup compartment.
6. Dust Cup Compartment. To open, turn dust cup latch (3) to the left pointing to unlock symbol, then grasp dust cup handle
(5) and pull dust cup out and away from unit. To close, place the front of the bottom of the dust cup in groove at the bottom of dust cup compartment, rotating dust cup up and against unit. Then turn dust cup latch to the right pointing to the lock symbol.
7. Stair Handle. To use when cleaning stairs.
8. Handle Release. Step on handle release. Pull handle back to a comfortable position. Press release again to lower handle further to clean under furniture.
9. Light Bulb Compartment. To gain access to light bulb compartment remove the two screws in the lens.
10. Brush Roll Belt Window. To check condition of belt watch to see if white dots on belt are moving through the window. This indicates the brush roll is turning.
11. Screws to Release Hood. Remove these screws to release hood and give access to brush roll belt area.
7
8
6
9
10
11
12. Cleaner Height Setting. The front of the cleaner has an adjustment that raises or lowers the cleaner base to match the type of floor surface. With the cleaner cord unplugged, set the adjustment to lowest setting for maximum carpet cleaning. If the cleaner is difficult to push, move adjustment to next highest setting until cleaner is comfortable to push. The brush roll must reach the carpet for effective cleaning. For ease in moving the adjustment knob, place handle in operating position and tilt cleaner back to remove weight from front wheels.
WARNING: Avoid injury. Keep loose clothing, hair, fingers, and all other parts of body away from any moving part (such as the revolving brush). Turn off the switch and unplug the cleaner before changing the cleaner height setting.
13. Extension Wands. Use these wands on the end of the hose for added cleaning reach.
5
6
14
19
14
How To Use
(continued)
16
14
15
14. Hose Retainers (3). Place hose on retainers to store hose on unit.
15. Carrying Handle. Use this handle to carry unit from one place to another.
16. Dusting/Upholstery Brush. Store dusting brush here.
17. Electrical Cord Hooks (2). Wrap electrical cord around them to store electrical cord on unit. Top hook rotates down for quick release of the electrical cord. Rotate back up to store electrical cord.
18. Clear Tube Quarter Turn Fastener. Turn this fastener to the unlock position to remove the clear tube. To replace tube, place tube on the back of the unit and turn fastener to lock position.
19. Crevice Tool. Store crevice tool here.
20. Hose Adapter. Place the end of the hose into hose adapter for floor/carpet cleaning.
17
18
17
20
Thermal Cut Off
This cleaner has a special thermostat that protects the cleaner in case of motor overheating.
If the cleaner suddenly turns off, follow this procedure:
1. Push on/off switch to off.
2. Unplug cleaner.
3. Check for source of overheating problem (i.e. full dust cup, clogged hose or clogged filters).
4. If a full dust cup, clogged hose or clogged filters are found, empty the dust cup, unclog the hose or replace the filters.
5. Wait at least 30 minutes before attempting to reuse the cleaner.
6. After 30 minute cool down period, plug the cleaner in and push the switch pedal. The cleaner should turn on.
7. If the cleaner still does not operate, call 1-800-282-
2886 for customer assistance.
How To Use Accessories
CAUTION: Do not place cleaner on furniture or steps as the brush roll may cause damage. Place cleaner on floor with the handle in storage position while using accessories.
1. Remove hose from hose adapter on the back of cleaner.
2. Place desired accessory onto end of hose or wand.
Dusting/Upholstery Brush is for furniture, blinds, books, lamp shades, shelves, curtains, draperies, cushions and fabrics.
Dusting/
Upholstery
Brush
Crevice
Tool
Hose or
Wand
Hose
Adapter
Crevice Tool
cleans corners, baseboards, between cushions.
Extension wands
(Some models use 1 wand)
Nested extension wands
to add reach.
• Grasp both wands near ridges.
• Pull apart.
• Turn ridge end to center.
• Push wands together.
7
How to Check and Clear Hose Blockages
Low suction or poor pickup may be due to a blockage in the vacuum cleaner.
1. Remove hose from hose retainer and check suction at end of hose - if little or no suction, check dust cup. Empty if needed. If no improvement, proceed to step 2.
CAUTION: Turn off the switch and unplug the electrical cord before clearing hose.
2. Remove electrical cord from cord hooks. Disconnect the clear tube by turning quarter turn fastener to the right to release, then lift away from cleaner.
Check for any obstructions that may be in the tube. Any obstructions can be removed by using a blunt instrument to clear the tube.
3. To completely release hose from the unit, remove two screws.
Any obstructions can be removed by using a blunt instrument to clear the hose. Flexing the hose may help loosen the blockage.
After clearing blockage, reverse above steps to reassemble unit.
Electrical
Cord
Hose Retainer
1
1. Remove hose from hose retainer and check suction at end of hose.
Quarter Turn
Fastener
Two Screws
3
2
Clear
Tube
8
2. Disconnect clear tube.
3. Release hose from unit.
How To Maintain
The instructions in this booklet serve as a guide to routine maintenance. To avoid unnecessary service calls, check the dust cup, belt, and brush roll often.
Brush Roll
The brush roll turns as it sweeps and combs the carpet nap. Remove hair and threads from the brush roll so it continues brushing the carpet. To maintain the most efficient cleaning, the bristles must touch the carpet. To test the bristle length, hold a ruler against the underneath side of the cleaner. If the bristles no longer touch the ruler, replace the brush roll.
Brush Roll Belt
The brush roll belt turns the brush roll to agitate, sweep, and comb the carpet nap. Check the belt regularly to be sure it is in good condition. Replace the belt if it stretches, cracks or loses tension. Cut away any hair or threads wound around the brush roll or the belt pulley because the buildup could cause the belt to rotate unevenly.
How To Replace Brush Roll Belt – Style EXT, PN 61120A
CAUTION: Turn off the switch and unplug the electrical cord before replacing belt. Belt pulleys can become hot during normal use. To prevent injury, avoid touching the motor pulley when checking the belt.
1
3
2
1. Lower handle to floor to change belt.
2. Remove two screws to release hood. Lift hood to remove.
3. Lift left end of brush roll.
4. Remove and discard belt.
5. Clean debris from brush roll area.
4
Motor
Shaft
Belt
Brush
Roll
9
5
To Change Dust Cup Pleated Filter:
NOTE: Turn off the switch and unplug the electrical cord before changing the
Pleated Filter. Never operate the vacuum cleaner without the dust cup or the pleated filter assembly.
6. Place new belt around motor shaft.
6
7
7. Place belt around brush roll pulley.
8. Pull right side of brush roll to stretch belt. Secure right end cap into base.
1
Dust Cup
Latch
2
Dust Cup
8
Left side view
9. Align left end cap with square in base. Push end cap into place; see left side view.
9
10. Rotate brush roll to seat belt.
11. Replace the hood. Make sure hood front is behind furniture guard.
12. Tighten screws.
Use replacement belt, Style EXT, PN 61120A.
10
Release dust cup by rotating dust cup latch to the left pointing to the unlock symbol ( ). Pivot dust cup out and away from cleaner and remove.
Remove cyclonic dust cup by pulling latch (1) forward, pivoting cyclonic dust cup out and lifting up. To replace cyclonic dust cup, put bottom of cyclonic dust cup in place by aligning tabs in slots and pivot top assembly back into place. Push down on latch (1), making certain that latch securely snaps and overlaps tabs at top of dust cup.
To maintain good performance, check and clean the
Pleated Filter each time the dust cup is emptied and clean if needed. The filter can be cleaned by washing with mild detergent and warm water. Be sure pleated filter is completely dry before reinstalling.
To clean the Pleated Filter, Style DCF4, PN 62132:
1. Remove the gray filter assembly by grasping handle and lifting upward and out of the dust cup.
2. Grasp the pleated filter and turn counter clockwise to remove.
3. Lift pleated filter from cone and wash. Shake excess water from filter. Do not submerge gray filter assembly
– wipe only with a damp cloth.
4. When all parts are completely dry, replace pleated and turn clockwise to lock in place.
Pleated
Filter
Gray Filter
Assembly
Use The Eureka brand replacement pleated filter, Style DCF-4, part number 62132.
FOR INSTRUCTIONS ON HOW TO REMOVE THE CYCLONIC DUST CUP FROM THE CLEANER BODY, REFER TO
PAGE 10.
Emptying the Cyclonic Dust Cup:
It is clearly visible when the dust compartment is full and needs emptying. Remove dust cup from cleaner body and dump debris in a waste container.
Reinstalling the Cyclonic Dust Cup:
To mount gray filter assembly into cleaner body, make certain gray filter assembly is fully seated in top of dust cup.
Replace dust cup by aligning front of the bottom of dust cup into groove on cleaner. Pivot dust cup up against cleaner and rotate the dust cup latch to the right to secure.
CAUTION:
The dust cup can be washed in warm water, if desired, but strong detergents should not be used.
Dry thoroughly before using again. Do not submerge gray filter assembly, wipe only with a
damp cloth.
11
Cleaning and Replacing Filters
HEPA Filter, Style GE-1, PN 62134
Inspect the HEPA filter periodically and change as filter periodically.
To Replace HEPA Filter
1. Push down on latch and pull out on HEPA filter door to remove.
2. Grasp filter and pull out.
3. Place new HEPA filter into cleaner.
4. To close, place HEPA filter door on top of bottom tab, pivot door up and press door against cleaner until it latches.
Use replacement HEPA filter supplied, Style GE1, part number, 62134.
How To Change Light Bulb
CAUTION: Turn off the power switch and unplug the electrical cord before changing light bulb.
1. Lower handle to remove two screws from lens cover.
2. Pull lens cover from cleaner.
3. Support socket with one hand and pull light bulb straight out to release.
4. Place new light bulb into socket; push to secure.
5. Push light bulb and socket back so bulb will not touch lens cover.
6. Replace lens cover.
7. Secure with two screws.
Use replacement light bulb, 57940-3.
12
HEPA
Filter
Latch
HEPA
Filter
Door
Lens
Cover
PROBLEM
Motor will not start.
Motor suddenly stops.
Does not clean the carpet or
floor
No suction at the end of the
hose.
Headlight not working.
Noise from the brush roll area.
Cleaner is hard to push.
Brush roll will not turn.
Burning smell.
Cleaning height knob will not
turn.
Missing parts or questions.
Problem Solving
NOTE: Turn off the switch and unplug the electrical cord before servicing.
CAUSE
✓
Electric Plug
✓
Thermal Cut Off
✓
✓
✓
✓
Dust Cup and Filter(s)
Belt
Brush Roll
Hose
✓
✓
Dust Cup and Filter(s)
Hose
✓
Light Bulb
✓
✓
Brush Roll
Belt
✓
✓
✓
✓
✓
✓
✓
Cleaner Height Setting
Belt
Brush Roll
Belt
Brush Roll
Belt
Cleaner Height Setting
✓
SOLUTION
Push plug securely into outlet.
Try another outlet.
Check circuit breaker.
Refer to page 6.
Empty the dust cup. Make sure the foam cone filter is clean and installed properly. Make sure dust cup is installed properly and dust cup latch secured.
Replace a cut, loose or out of shape belt.
Clean hair and thread from bristles and end cap area.
Replace brush roll if bristles are worn.
Remove any clogs from the hose that restrict the airflow.
Empty the dust cup. Make sure the foam cone filter is clean and installed properly. Make sure dust cup is installed properly and dust cup latch secured.
Remove any clogs from the hose that restrict the airflow.
Check both ends of the hose. (See pages 8)
Replace light bulb.
Remove hood and clean debris from the brush roll area.
Replace a cut, loose or out of shape belt.
Turn adjustment knob to a higher position. Hint: Put handle in operating position. Tilt the cleaner back to raise the front wheels off floor. Then turn the knob.
Replace a cut, loose and out of shape belt.
Remove hood and clean debris from the brush roll area.
Replace cut, loose or out of shape belt.
Remove hood and clean debris from the brush roll area.
Replace cut, loose or out of shape belt.
Hint: Put handle in operating position. Tilt the cleaner back to raise the front wheels off floor. Then turn the knob.
Call 1-800-282-2886 for customer assistance.
13
THE EUREKA LIMITED WARRANTY
W
hat This Warranty Covers
Your Eureka cleaner is warranted to be free from all defects in material and workmanship in normal household use for a period of two years. The warranty is granted only to the original purchaser and members of his or her immediate household. The warranty is subject to the following provisions.
W
hat This Warranty Does Not Cover
• Parts of the cleaner that require replacement under normal use, such as disposable dust bags, filters, drive belts, light bulbs, brush roll bristles, impellers and cleaning.
• Damages or malfunctions caused by negligence, abuse, or use not in accordance with the Ownerʼs Guide.
• Defects or damages caused by unauthorized service or the use of other than Genuine Eureka parts.
W
hat The Eureka Company Will Do
The Eureka Company will, at its option, repair or replace a defective cleaner or cleaner part that is covered by this warranty. As a matter of warranty policy, the Eureka Company will not refund the consumerʼs purchase price.
W
arranty Registration
Please fill out and return the warranty registration card accompanying your cleaner.
O
btaining Warranty Service
To obtain warranty service you must return the defective cleaner or cleaner part along with proof of purchase to any Eureka Authorized Warranty Station.
You will find the nearest location in the Yellow Pages, under “Vacuum Cleaners–Service and Repair.” Be certain that the Warranty Station is “Eureka
Authorized.”
For the location of the nearest Eureka Authorized Warranty Station or for service information, telephone toll free:
USA: 1-800-282-2886
Mexico: (55) 5343-4384 www.eureka.com
Canada: 1-800-282-2886
If you prefer you can write to Electrolux Home Care Products North America, P O Box 3900, Peoria, Illinois 61612, USA. In Canada write to Electrolux Home Care Products Canada, 866 Langs Drive, Cambridge, Ontario N3H 2N7.
If it is necessary to ship the cleaner outside your community to obtain warranty repair, you must pay the shipping charges to the Eureka Authorized Warranty
Station.
Return shipping charges will be paid by the Warranty Station. When returning parts for repair, please include the model, type, and serial number from the data plate on the cleaner.
F
urther Limitations and Exclusions
Any warranty that may be implied in connection with your purchase or use of the cleaner, including any warranty of Merchantability or any warranty for
Fitness For A Particular Purpose is limited to the duration of this warranty. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you.
Your relief for the breach of this warranty is limited to the relief expressly provided above. In no event shall Eureka be liable for any consequential or incidental damages you may incur in connection with your purchase or use of the cleaner. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary by state.
GENUINE
EUREKA PRODUCT
Q
uestions & Answers about Genuine Eureka Products
Q: Why should I use only Genuine Eureka paper bags, belts, and parts in my Eureka vacuum cleaner?
A: Using Genuine Eureka Products, which are made to our exacting specifications and engineered with emphasis on quality, performance, and customer satisfaction, ensures the long life and cleaning efficiency of your vacuum cleaner. Overall, this saves you money and helps to keep your home clean.
Q: How can I be sure I am using only genuine Eureka products in my vacuum cleaner?
A: Typically, packaged products and paper bags can be identified by a “Genuine Eureka Product” symbol (see illustration above). For further identification assistance, you may call our toll-free number, 1-800-282-2886, for the location of a nearby Eureka Authorized Warranty Station.
Q: Are there any differences between “made to fit” or “imitation” and Genuine Eureka paper bags, belts, and parts?
A: Yes, there are some very important differences in materials, quality, and reliability. Many customers have mistakenly purchased “imitation” paper bags and parts while thinking they purchased genuine. Unfortunately, many of these customers discovered the differences after they experienced related difficulties.
For Genuine Eureka Value, Accept No Imitations!
ELECTROLUX HOME CARE PRODUCTS NORTH AMERICA
Household Warranty abs 190
14
Questions?
Call
1-800-282-2886
Accessory Items in This Carton
1 crevice tool
1 dusting/ upholstery brush
1 nesting wand
1 hardware package (2 screws)
1 vacuum cleaner handle
Thank you for selecting a Eureka brand cleaner.
Don’t Forget to Use Genuine Eureka
Belts & Filters www.eureka.com
CAUTION: Damages caused by the use of other brand bags and belts are not covered by the Limited Warranty.
Part No. 75448
(1/05)
©2005 Electrolux Home Care Products Ltd. Printed in China
SOLD TO:
Name
Address
City
Telephone (Day)
Telephone (Eve)
Fax
State
TYPE
Zip
SERIAL
Genuine Eureka Bags, Belts and Filters
DISPOSABLE BAGS - STYLE GE-1 62423
(PACKAGE OF THREE PLUS ONE
REPLACEMENT MICRON FILTER)
STYLE U BELT
Electrolux Home Care Products, Ltd.
P.O. Box 3900 • Peoria, IL 61612
IMPORTANT: Be sure to include your model, type, and serial numbers. These numbers may be found on the rating plate.
HEPA FILTER CARTRIDGE, GE-1
DUSTCUP FILTER DCF-4
(FOR BAGLESS MODEL)
SHIP TO:
Name
Address
City
Telephone (Day)
Telephone (Eve)
Fax
State Zip
PAYMENT (no C.O.D. Orders)
Check or money order. Do not send currency.
Payable to Electrolux Home Care Products North America
VISA DC MC AMEX
MICRON FILTER ASSEMBLY
Accessories/Tools
EXTENSION WAND
COMBINATION TOOL
CREVICE TOOL
Part No. Qty. Price
61120B
62134
62132
71117A
71119-1
60990-3
28497-355N
(USD)*
$6.99
$2.99
$15.99
$14.99
$2.99
$8.49
$4.99
$1.99
$14.99
Total
ACCT. NUMBER
SIGNATURE (full name as shown on acct.)
TO ORDER:
By Phone: 1-800-282-2886
Hours: Call Monday-Friday
8:00 am - 7:30 pm CST;
Saturday 10:00 am - 6:30 pm CST
(Please call the same number for answers to problems or questions in the USA and Canada)
By FAX: 1-309-589-7583
By Mail:
Please be sure to include day and evening phone numbers.
62407
(1/05)
TURBO NOZZLE
Hoses
HOSE ASSEMBLY
Brushroll
BRUSHROLL ASSEMBLY
(FOR BAGGED MODEL)
BRUSHROLL ASSEMBLY
(FOR BAGLESS MODEL)
Miscellaneous Parts
LIGHT BULB
TOTAL
(*prices subject to change without notice)
TAX
(add state tax & local taxes as required by law)
POSTAGE & HANDLING CHARGE
(within USA)
T O T A L E N C L O S E D
© 2005 Electrolux Home Care Products Ltd.
28612A
61440-5
60844-5
62352-2
57940-2
$14.99
$12.99
$10.99
$1.49
$5.50
Printed In China
aux China Imprimé en China – Impreso © 2005 Electrolux Home Care Products Ltd.
DO
NT
UI
OI
CL
-J
IN
CI
L
L
(dentro de los EE.UU.)
$5.50
(aux É.-U.)
(agregue impuesto estatal e impuestos locales según exige la ley)
(precios sujetos a cambio sin previo aviso)
(les prix peuvent être modifiés sans préavis)
AMPOULE
$1.49
57940-2 FOCO DE LA LUZ
(POUR LES MODÈLES SANS SAC)
ASSEMBLAGE DU ROULEAU-BROSSE
MODELO SIN BOLSA) (PARA
$10.99
62352-2 ENSAMBLAJE DEL CEPILLO CIRCULAR
(POUR LES MODÈLES AVEC UN SAC)
ASSEMBLAGE DU ROULEAU-BROSSE
MODELO CON BOLSA) (PARA
$12.99
60844-5 ENSAMBLAJE DEL CEPILLO CIRCULAR
AU ASSEMBLAGE DU TUY
$14.99
61440-5 ENSAMBLAJE DE LA MANGUERA
BROSSE TURBO
$14.99 28612A BOQUILLA TURBO
SUCEUR PLAT
$1.99
28497-355N HENDIDURAS UTENSILIO PARA
TI USAGE OUTIL MUL
$4.99
60990-3 UTENSILIO COMBINADO
TUBE DʼEXTENSION
$8.49
71119-1 TUBO DE EXTENSIÓN
ASSEMBLAGE DU FILTRE MICRON
$2.99
71117A TRO DE MICRONES ENSAMBLAJE DEL FIL
DCF-4 (POUR LES MODÈLES SANS SAC)
$14.99
62132
TOUCHE, GE-1
$15.99
62134
$2.99
61120B
AVEC UN
Electrolux Home Care Products
$6.99
Total
e.
iqu e lo, os.
alét s d ode dat
61612
de
éro e m sign ca um s d ue ero laq
pla s n a p e, le
úm n la
Precio (USA)
s n ur l
typ n e ez s e le
lo ntra
Qté Prix (USD)
62423
Parte No. Cant.
N° pièce
ver lur cue luir
en inc rou
ʼinc us t s d de s se se
vo vou
úre ero
P.O. Box 3900 • Peoria, IL
ezque
úm seg sur s n
: A rie
As sto . E
NTE
e sé
NT: ues
erie
RTA ntiq
et d
RTA
y s
PO
èle
PO the
mod
IM
tipo
IM
Au
TUCHO, GE-1
ARA RECIPIENTE
eka
TRES MÁS UN FILTRO
ARA MODELO SIN BOLSA)
A EN CAR
A A CAR
Eur
DE TROIS,
es iltr
POLVO (P
FILTRE DU COLLECTEUR À POUSSIÈRE
FILTRE HEP
FILTRO HEP
PARA
FILTRO DCF-4 P
(PAQUET
FILTRE MICRON DE RECHANGE)
COURROIE - STYLE U
CORREA ESTILO U
SACS JETABLES - STYLE GE-1
DE MICRONES DE RESPUESTO)
(PAQUETE DE
BOLSAS DESECHABLES – ESTILO GE-1
et F es roi our
(taxes locales et autres requises par la loi)
TA
TA
AL
AL
(1/05)
s, C
SERIE
Sac
SÉRIE
N° DE
NÚMERO
IMPUESTOS
FRAIS DE MANUTENTION ET DʼENVOI
GASTOS DE ENVÍO
TO
TO
TOT
TOT
TAXE
Bolsas, Correas y Filtros Genuinos de Eureka
Accessoires / outils – Accesorios / Utensilios
Mangueras / Tuyau
Rouleaux-brosses – Cepillos circulares
Piezas misceláneas / Parties divers
62407
ORDENAR: rio r e
0 se
:30 tas me
7:3
- 6
- a e gun o lla nne t c ono ula
3
tio men léf orm
758
ir.
men ple el F
.
e te che s d
89-
so de
3
ne
sim
et
no ero lle us
9-5
n la
- j rez plis ya men o e
89-
te our
-vo sez
758
núm
-30
pre me
am
am
éxic lla
:00
o
:00 n M or
10 s 8 mas
. *E ble fav ado rne or adá pro
Sáb vie
) P l);
a ral
Can de so ent
y ntra nes clu ple
ía one ssu
Rem
9-5
: 1
el d r in
Sim
éph e. A te tél avo
eur
en nda dar e d
Uni
4.
ca r c
ce e lu dos
-30
ran or f de and os mm
du
. P
opi
X: 1
stá tán ero os
438 lam tad
úm
e
es
43-
: L
léc
53
Es o n ora ora
FA
té
55) los
(h
(h
RAS
nu
de a lla
Ped mar ido mér
co
Por teléfono: 1-800-282-2886
Par la poste :
Por correo:
t
à 10 t 1 nir
.-U
éro
. e des
h
7 h
.
x É bte ntre h e um i e
8 ur o
au e n
Po med ntre mes
êm re.
sa i e blè e m ent
; le red pro er l ou
C end ns
de pos ntre u v ale
Ce stio om
de di a z c lle que orm ale lun
à v eur
, v
no
: eui os e n rm
Du ada es
0, h ure
RES
h 3
he ons
Can
Par téléphone : 1-800-282-2886
au rép
18
30,
HEU
Por
Par
al ( en mism pm pm
HO
vos bon par de
POUR COMMANDER : – PARA
En Ligne : – Por internet: www.eureka.com
O
TION
AMEX
TIPO
TYPE
MC
FECHA VENCIMIENT
DATE DʼEXPIRA
DC
(no se aceptan ordenes contra reembolso)
(pas de commandes en PORT DÚ)
Codigo postal
Code postal
Codigo postal
Code postal
VISA
Chèque ou mandat. Nʼenvoyez pas dʼespèces.
Cheque o giro postal. No envée dinero en efectivo.
Payable à : Electrolux Home Care Products North America
Pagadero a: Electrolux Home Care Products North America
VENDU À: – VENDIDO A:
Nom
Nombre
Adresse
Direccion
Ville
Ciudad
Province
Estado
Téléphone (jour)
Téléphone (soir)
Télécopieur
ENVOYÉ À: – ENVIAR A:
Nom
Nombre
Adresse
Direccion
Ville
Ciudad
Province
Estado
Téléphone (jour)
Téléphone (soir)
PAGO
PAIEMENT
Teléfono (noche)
Teléfono (día)
Teléfono (noche)
Teléfono (día)
Fax
N° DE
MODÈLE
NÚMERO
MODELO
NUMÉRO DE COMPTE – NÚMERO CUENTA
FIRMA (nombre completo como aparece en la cuenta)
SIGNATURE (nom complet comme sur le compte)
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Questions and Answers
How do I assemble the Eureka HP5550 Series vacuum cleaner?
How do I use the Eureka HP5550 Series vacuum cleaner?
How do I empty the dust cup of the Eureka HP5550 Series vacuum cleaner?
How do I replace the HEPA filter of the Eureka HP5550 Series vacuum cleaner?
How do I check the brush roll belt of the Eureka HP5550 Series vacuum cleaner?
Related manuals
advertisement
Table of contents
- 2 Important Information
- 3 Assemble
- 7 Accessories
- 8 How to Remove Blockages
- 9 Brush Roll
- 9 Brush Roll Belt
- 10 Filter
- 11 Dust Cup
- 13 Problem Solving
- 14 Warranty
- 16 Customer Order Form
- 14 Canada